RCMT10T3M0-FM4 WSM20S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating, the FM4 chipbreaker and the compact 7° clearance to achieve stable machining of stainless steel and heat‑resistant superalloys; order the RCMT10T3M0-FM4 WSM20S directly via Metav Werkzeuge or consult the specialists for cutting‑data recommendations. RCMT10T3M0-FM4 WSM20S – Indexable turning insert for stainless steel and superalloys (Walter Tools) The RCMT10T3M0-FM4 WSM20S is a round indexable turning insert engineered for demanding applications, combining a coated carbide grade from the Tiger·tec Silver series with an FM4 chipbreaker to support secure chip formation in stainless steel and titanium‑basis superalloys. RCMT10T3M0-FM4 WSM20S by Walter Tools Tiger·tec Silver coating for high heat resistance FM4 chipbreaker for stable chip control 7° clearance, round 10 mm plate, T3 thickness Maximum process reliability for tough materials The Tiger·tec Silver coating paired with the WSM20S carbide grade provides elevated heat resistance and a reliably stable cutting edge when machining difficult materials. Designed to address the ISO groups M and S, this grade helps to control tendencies such as adhesive wear and built‑up edge that occur with stainless steel and heat‑resistant superalloys. As a result, the insert contributes to consistent component quality and reduced process variability, supporting predictable cycle times and improved production uptime. Predictable chip formation and secure edge life Thanks to the FM4 chipbreaker and its round plate form, the geometry promotes controlled chips and reduces the risk of entangling or long stringy chips in interrupted cuts. The 7° clearance together with the T3 plate thickness supports edge stability under higher mechanical and thermal loads, which lowers the probability of premature edge failure. These geometry features translate into fewer tool changes and steadier surface finish — a practical advantage for series production and critical components. Productivity gains and economical machining The combination of a coated carbide grade and a dedicated chipbreaker focuses on maintaining cutting performance over longer tool life. The insert’s behaviour under thermal stress and its stable edge retention help to decrease machining costs per part through extended intervals between indexing. Consistent surface quality and repeatable tool life are particularly valuable when processing high‑value components where rework or scrap would have a significant economic impact. Selection guidance for secure integration The round 10 mm plate form and the RCMT geometry suit a range of turning holders that accept this family; the WSM20S grade is especially recommended where machining of stainless steel or titanium alloys is frequent. For an accurate match of cutting parameters — feeds, speeds and depth of cut — and to confirm the best holder‑insert pairing for a given machine and workpiece, refer to Metav Werkzeuge’s technical advisory. Practical cutting data and trial recommendations help to unlock the insert’s full potential in specific production environments. For tailored cutting data and to source genuine Walter Tools RCMT10T3M0-FM4 WSM20S indexable turning inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RCMT10T3M0-FM4-WSM20S-WALTER Product: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Shape: Round Chipbreaker: FM4 Tolerance class: M Facts Plate size: 10 mm Plate thickness: T3 Clearance angle: 7° Applicable material groups: S / M Designation: RCMT10T3M0-FM4 Full designation: RCMT10T3M0-FM4 WSM20S Special features Coating: Tiger·tec Silver Grade type: coated carbide Optimised for stainless steel and superalloys Stable chip formation Robust cutting edge for demanding applications FAQ Which materials are suitable for this insert? The RCMT10T3M0-FM4 WSM20S insert is developed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where the WSM20S grade supports secure chip formation and edge stability. What are the main benefits of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WSM20S grade enhances thermal resistance and reduces wear speed, which helps to maintain cutting performance and surface finish during extended runs. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker provides controlled chip segmentation and evacuation, improving process security and reducing the risk of built‑up edge when turning difficult materials. What does the 7° clearance mean in practice? The 7° clearance angle contributes to cutting edge stability and reduces rubbing at the flank face, supporting longer edge life under the thermal and mechanical demands of stainless steel and superalloys. Is this insert suitable for automated production environments? Yes, the combination of a coated carbide grade, the FM4 chipbreaker and stable geometry makes the insert well suited to automated and series production where repeatable tool life and consistent part quality are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected goods are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original and brand new from the manufacturer. The brand in the data is Walter Tools.
RCMT10T3M0-FM4 WSM30S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and a robust FM4 chipbreaker to secure stable cutting in demanding materials; the insert’s 7° relief and round RCMT form ensure reliable edge strength and versatility in turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. RCMT10T3M0-FM4 WSM30S indexable turning insert — Tiger·tec Silver, Walter Tools A RCMT10T3M0-FM4 WSM30S indexable turning insert engineered for secure chip control and high thermal resistance when machining stainless steels and heat-resistant superalloys. Tiger·tec Silver coating for thermal resistance FM4 chipbreaker for secure chip control 7° relief angle for robust cutting edge Round RCMT 10 mm form for versatile turning Increased productivity on difficult-to-cut materials The Tiger·tec Silver coating delivers improved thermal resistance and wear behaviour, which translates directly into more consistent cutting performance when facing stainless steels and heat‑resistant superalloys. Because the grade is a coated carbide designed for high temperatures, the carbide substrate and coating combination reduces edge wear and supports reliable machining, so cycle times remain predictable and downtime is reduced. This specification is particularly valuable for turners who prioritise steady production and repeatable results. Reliable chip control and edge stability for safer turning Equipped with an FM4 chipbreaker and a 7° relief angle, the insert promotes controlled chip formation and evacuation. A stable chipflow reduces the risk of built-up edge and tool vibration, improving surface finish and protecting the cutting edge. The round RCMT form distributes cutting forces evenly, enhancing insert life under interrupted cuts or when machining variable cross-sections. These characteristics lower the likelihood of unexpected tool changes and support smoother process planning. Practical application and material compatibility This grade is targeted at group M (stainless steels) and group S (heat‑resistant superalloys and titanium) according to ISO classifications. The WSM30S carbide delivers balanced toughness and heat resistance, making it suitable for tough-to-machine alloys where heat concentration and material ductility challenge conventional grades. For workshops seeking a single insert to cover a range of demanding components, this solution offers an effective compromise between wear resistance and edge robustness. Selection guidance and machining advantages Choosing the RCMT form with a 10 mm inscribed circle and the T3 thickness provides a compact footprint with sufficient edge strength for many finishing and semi-finishing tasks. The geometry supports predictable force vectors and a smooth transition between passes, which benefits dimensional control and surface quality. When paired with appropriate speeds and feeds for carbide‑coated grades, the insert helps maintain process reliability and consistent part quality across batches. Contact Metav Werkzeuge for tailored selection advice and availability of Walter Tools Tiger·tec Silver inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: RCMT10T3M0-FM4-WSM30S-WALTER Label: Drehwendeschneidplatte RCMT10T3M0-FM4 WSM30S Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Base designation: RCMT10T3M0-FM4 ISO designation: RCMT10T3M0-FM4 WSM30S Grade/series: WSM30S / Tiger·tec Silver Facts Insert size: 10 mm Relief angle: 7° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: FM4 Form: Round (RCMT) Material suitability: S / M (superalloys/titanium and stainless steels) Typical applications: Heavy cutting and machining of difficult materials FAQ What materials is this insert suitable for? The RCMT10T3M0-FM4 WSM30S insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering heat resistance and stable chip formation for these difficult-to-cut materials. How does the FM4 chipbreaker help in production? The FM4 chipbreaker on the RCMT10T3M0-FM4 WSM30S promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of built‑up edge during turning operations. Which machining tasks suit this round RCMT format best? The round RCMT form is well suited for finishing and semi‑finishing where consistent edge strength and smooth engagement are required; the geometry also performs reliably in interrupted cuts. Can this insert handle high-temperature machining? Yes. The combination of the Tiger·tec Silver coating and the WSM30S grade provides enhanced thermal resistance, making the insert appropriate for operations with elevated cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for descriptive purposes only and do not imply any affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
RCMT10T3M0-FP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life from the Tiger·tec Gold coating and reliable chip control from the FP4 chipbreaker for stable, economical turning of steel—order directly via Metav Werkzeuge or contact our consultants for application support. RCMT10T3M0-FP4 WPP20G — Turning indexable insert, Tiger·tec Gold grade for steel machining (Walter Tools) RCMT10T3M0-FP4 WPP20G is a round turning insert designed for robust and consistent steel machining in versatile turning operations. Tiger·tec Gold coated carbide for high wear resistance FP4 chipbreaker for controlled chip formation 7° clearance angle for stable cutting geometry Round 10 form for versatile turning applications Longer productive life through advanced coating technology The combination of the WPP20G grade and Tiger·tec Gold coating delivers noticeably improved wear resistance and process stability when machining steels. The coated carbide microstructure is optimised to withstand the typical heat and deformation encountered during steel turning, which translates into longer intervals between index changes and fewer interruptions on the shop floor. For production environments where consistent component quality and reduced tool consumption matter, this insert provides a clear economic advantage while maintaining dimensional reliability. Predictable chip behaviour and improved surface quality The FP4 chipbreaker has been developed to produce short, manageable chips in a wide range of steel applications, reducing the risk of entanglement and simplifying chip evacuation. Controlled chip formation improves operator safety and avoids surface damage to the workpiece, resulting in a better finish and fewer rework cycles. The round form combined with the chipformer is particularly beneficial for light profiling and finishing passes, where smooth cutting action and constant contact conditions improve repeatability and part quality. Practical design for efficient indexable-tool management With a 10 form and T3 thickness, the insert fits common holders and tool systems while offering a stable cutting edge for medium-duty turning. The 7° clearance supports a secure cutting geometry that balances edge strength with reduced rubbing on the flank face. The classification in tolerance class M ensures consistent fit and repeatable positioning in pocket-type toolholders, reducing set-up time. Overall, the insert’s design enables straightforward handling, economical indexing cycles and predictable performance across a broad selection of steel grades. For application advice, material recommendations or to request a quote for Walter Tools turning inserts, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 — our specialists will recommend the optimal grade and geometry for the intended operation Technical data SKU: RCMT10T3M0-FP4-WPP20G-WALTER Product: Turning insert RCMT10T3M0-FP4 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Size: 10 Thickness: T3 Clearance angle: 7° Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: FP4 Form: Round Application: Steel (P) Execution: T Designation without grade: RCMT10T3M0-FP4 FAQ What materials is this insert suitable for? The RCMT10T3M0-FP4 WPP20G grade is designed primarily for steel (P) applications and performs well across typical unalloyed and alloyed steels. What does the FP4 chipbreaker do in practice? The FP4 chipbreaker controls chip formation to produce short, manageable chips, improving surface finish and reducing the risk of chip-related interruptions during turning. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating increases wear resistance and thermal stability, extending the insert’s life and contributing to consistent machining results under typical steel cutting conditions. Is the insert compatible with standard indexable holders? The RCMT form and T3 thickness match common toolholder pockets designed for round inserts, enabling straightforward replacement and accurate seating. What tolerance and repeatability can be expected? Tolerance class M provides reliable positioning and repeatable results within standard indexable tooling systems, supporting consistent part tolerances. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes and do not indicate any connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer. Walter Tools is a brand of Walter AG, part of the Sandvik group.
RCMT10T3M0-HU6 WPP10G Wendeplatten - Walter Tools
Take advantage of wear-resistant Tiger‑tec Gold coating, stable HU6 chip control and compact RCMT geometry to keep turning cycles productive and repeatable. Benefit from broad steel compatibility (ISO P) and reliable tolerance class M for consistent part quality. Order via Metav Werkzeuge or consult our specialists for application advice. RCMT10T3M0-HU6 WPP10G turning insert — Tiger‑tec Gold coating, for steel (ISO P) — Walter Tools The RCMT10T3M0-HU6 WPP10G is a round turning insert engineered for robust steel machining, combining a high-performance Tiger‑tec Gold grade with an HU6 chipbreaker for stable chip formation. Tiger‑tec Gold coating for high wear resistance Designed for steel machining (ISO P) HU6 chipbreaker for stable chip control Consistent tool life through optimised coating technology The Tiger‑tec Gold grade WPP10G uses a coated carbide substrate developed for wear resistance and broad process reliability. As a coated hardmetal grade, the insert reduces flank wear under the thermal and mechanical loads typical of steel turning, which translates into longer cutting edge life and fewer insert changes. For production environments this means more uptime and lower tooling expenditure per part, while maintaining repeatable dimensional results thanks to the tolerance class M. Stable chip control that improves surface quality and safety The HU6 chipbreaker is designed to produce predictable, short chips when machining steels across the ISO P group. Controlled chip formation reduces the risk of entanglement and rework, enabling safer automated processes and easier chip evacuation. The result is a noticeable improvement in surface finish and less manual intervention at the machine, which supports higher effective machining rates and reduced cycle interruptions. Compact geometry for precise turning in tight setups The RCMT round geometry with a 10 mm inscribed circle and thickness code T3 yields a compact yet sturdy cutting edge suitable for finishing and light to medium roughing passes. With a relief angle of 7°, the insert balances cutting edge strength and clearance to avoid rubbing while preserving edge life. This format integrates smoothly into standard toolholders for ISO turning systems and addresses typical steel grades encountered in general engineering and production work. For tailored advice on applying Walter Tools Tiger‑tec Gold inserts in specific steel turning operations, contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RCMT10T3M0-HU6-WPP10G-WALTER Type: Turning insert Designation: RCMT10T3M0-HU6 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Manufacturer: Walter Tools Tolerance class: M Facts Inscribed circle: 10 mm Thickness: 3 mm (T3) Relief angle: 7° Special features Coating technology: Tiger‑tec Gold Carbide grade: WPP10G Chipbreaker: HU6 Shape: Round (RCMT) Application group: Steel (ISO P) Execution: T Designation without grade: RCMT10T3M0-HU6 FAQ What steels are suitable for this insert? This RCMT10T3M0-HU6 WPP10G insert is specified for the ISO P group, covering unalloyed and alloyed steels typically encountered in turning operations. How does the Tiger‑tec Gold grade affect tool life? The Tiger‑tec Gold coating on the WPP10G grade increases wear resistance and thermal stability, which extends edge life and reduces the frequency of index changes on Walter Tools turning inserts. What chip behaviour can be expected with the HU6 chipbreaker? The HU6 chipbreaker produces short, controllable chips when machining steels, improving safety and chip evacuation for continuous turning cycles. Is this insert suitable for finishing passes? Yes, the RCMT geometry and the 7° relief angle make the insert appropriate for finishing and light to medium turning, delivering consistent surface quality. Which SKU should be quoted for ordering or replacement? Use RCMT10T3M0-HU6-WPP10G-WALTER when specifying this Walter Tools turning insert for procurement or tool management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation with our company.
RCMT10T3M0-HU6 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the HU6 chipbreaker for controlled swarf, and the compact round geometry for reliable profiling in steel turning; order through Metav Werkzeuge or consult the team for application advice. RCMT10T3M0-HU6 WPP20G indexable turning insert — Tiger·tec Gold, HU6 chipbreaker (Walter Tools) RCMT10T3M0-HU6 WPP20G is an indexable turning insert engineered for general steel turning applications, offering a coated carbide grade and a chipbreaker geometry tuned for consistent chip control during profiling and finishing operations. Tiger·tec Gold coating WPP20G HU6 chipbreaker for controlled chips 7° clearance angle for stable cutting Round insert 10 mm for profiling High-process performance through advanced coating and grade selection The coated carbide grade WPP20G from the Tiger·tec Gold family combines wear resistance with toughness to deliver consistent tool life when machining steels. The grade is optimised for the thermal and mechanical conditions typical of steel turning (ISO group P), which reduces flank wear and helps maintain dimensional accuracy over longer tool cycles. For production environments seeking predictable behaviour, the coated carbide surface lowers friction and improves heat resistance so that cycle times remain stable and surface finish targets are met. Better chip control and geometry that improves productivity The HU6 chipbreaker is designed to shape and evacuate chips effectively when paired with the round insert form. Controlled chips reduce the risk of entanglement and protect the workpiece surface, especially during profiling and light finishing passes. The insert’s 7° clearance angle supports a secure cutting edge engagement and helps maintain a consistent cutting force, which in turn reduces vibration and stabilises tool life. These combined geometry benefits contribute directly to higher throughput and lower scrap rates in serial turning operations. Practical handling, repeatable indexing and material compatibility The round insert with a nominal size of 10 mm and thickness class T3 offers flexible orientation and straightforward indexing for multi-edge utilisation. The tolerance class M ensures reliable fit in standard toolholders and predictable seating repeatability. As an indexable insert intended for steel machining, it supports a broad range of turning tasks from roughing to finishing when integrated into a suitable turning system. Maintenance is simplified by the multi-edge design: when an edge wears, the insert is indexed to present a fresh edge, reducing downtime and tool-change frequency. Contact Metav Werkzeuge for availability and tailored application guidance on this Walter Tools RCMT10T3M0-HU6 WPP20G insert with Tiger·tec Gold for dependable steel turning Technical Data Article number: RCMT10T3M0-HU6-WPP20G-WALTER SKU / UID: RCMT10T3M0-HU6-WPP20G-WALTER Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Insert shape: Round (Ø10 mm) Thickness: T3 Clearance angle: 7° Tolerance class: M Chipbreaker: HU6 Special features Grade: WPP20G (coated carbide, Tiger·tec Gold) Suitable for: Steel (ISO P) Application focus: profiling and general turning Multi-edge indexable geometry for reduced downtime FAQ What materials is this insert suited for? This Walter Tools RCMT10T3M0-HU6 WPP20G insert is formulated primarily for machining steels (ISO group P); the WPP20G grade and Tiger·tec Gold coating balance wear resistance and toughness for these materials. How does the HU6 chipbreaker affect machining? The HU6 chipbreaker on the insert provides controlled chip formation and evacuation, which improves surface finish and reduces the likelihood of chip entanglement during profiling operations. Can the round geometry be used for both profiling and finishing? Yes, the round insert form offers versatility: its radius and edge geometry make it suitable for profiling tasks and light finishing passes when selected alongside appropriate cutting parameters. Is the insert compatible with standard toolholders? With tolerance class M and the common RCMT designation, the insert is intended to fit standard toolholders designed for this insert family; correct seating and clamping are essential for repeatable performance. How is tool life extended with this grade? The Tiger·tec Gold coated grade WPP20G reduces adhesion and thermal wear on the cutting edge, which helps preserve geometry and extend usable edge life under typical steel cutting conditions. Walter Tools – Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names are used for descriptive purposes only and imply no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
RCMT10T3M0-HU6 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the HU6 chipbreaker and a precise 7° clearance to ensure productive and reliable steel machining; order the RCMT10T3M0-HU6 WPP30G insert directly via Metav Werkzeuge or consult the team for application advice. RCMT10T3M0-HU6 WPP30G indexable turning insert, round, 7° clearance — Walter Tools A RCMT10T3M0-HU6 WPP30G indexable turning insert engineered for efficient machining of steel, combining Tiger·tec Gold coating with a dedicated HU6 chipbreaker for controlled chip formation. Tiger·tec Gold coating for high wear resistance Suitable for machining steel (ISO P) Round insert with 7° clearance angle HU6 chipbreaker for controlled chip formation Consistent productivity for steel components The WPP30G grade from the Tiger·tec Gold series is formulated as a coated carbide to balance wear resistance and toughness when machining steels. Its composition and coating technology reduce flank wear and edge failure during continuous turning operations, which translates into longer tool life and fewer tool changes. The insert is optimised for the heat and chip behaviour typical of ISO group P materials, helping maintain process stability and consistent surface quality across batch and single-piece productions. Geometry designed for predictable chip control A round insert with a 7° clearance delivers a positive cutting geometry that supports smooth entry and exit in turning cycles; combined with the HU6 chipbreaker, this geometry promotes fragmented, controllable chips that improve evacuation and protect the cutting edge. The T3 thickness contributes to edge strength, while the round form offers flexibility for varying depths of cut and insert indexing, improving uptime by allowing multiple cutting positions before replacement. Stability and fit for reliable clamping The insert is supplied to tolerance class M, ensuring consistent pocket fit and repeatable seating in standard toolholders. This tolerance, together with the insert’s balanced grade characteristics, enhances process reliability under industrial conditions where dimensional consistency and vibration resistance are required. The design supports stable cutting forces, which aids in achieving repeatable part geometry and surface finish without frequent set-up adjustments. Applications, recommendations and technical support Optimised for turning operations in steel, the grade is suitable for a wide range of tasks from roughing to finishing where a compromise between wear resistance and toughness is needed. The series classification indicates a focus on productive cutting of steel, and the insert size (10) and geometry are chosen for versatile use in conventional and CNC lathes. For further technical details, machinability charts or recommendations for cutting data, contact Metav Werkzeuge via email or phone for application-specific guidance and cutting-parameter support. For tailored advice on integrating Walter Tools Tiger·tec Gold inserts into production processes, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — and request assistance with cutting data and holder compatibility. Technical Data SKU: RCMT10T3M0-HU6-WPP30G-WALTER Name: Drehwendeschneidplatte RCMT10T3M0-HU6 WPP30G Manufacturer: Walter Tools Core data Clearance angle: 7° Insert size: 10 Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP30G Chipbreaker: HU6 Shape: Round Material group: Steel (ISO P) Series: Tiger-tec Gold Execution: T FAQ What steels is this insert suited for? The RCMT10T3M0-HU6 WPP30G insert is designed for ISO group P steels; the WPP30G grade supports typical steel machining heat and chip behaviour. How does the HU6 chipbreaker affect performance? The HU6 chipbreaker on this Walter Tools insert helps produce controlled, shorter chips, improving evacuation and protecting the cutting edge during turning operations. Can the insert be used for finishing as well as roughing? Yes, the balanced properties of the WPP30G grade make the insert suitable for a range of operations from roughing to finishing in steel applications. What does the tolerance class M mean for clamping? Tolerance class M indicates medium-class manufacturing tolerances that ensure a consistent fit in standard toolholders, aiding repeatable seating and stable cutting. Where to get cutting data or holder compatibility information? For cutting data and holder compatibility regarding the RCMT10T3M0-HU6 WPP30G insert, consult Metav Werkzeuge for application-specific recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new goods from the manufacturer Walter Tools.
RCMT10T3M0-RK4 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, targeted wear resistance and precise chip control to improve cycle times when machining cast iron. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific recommendations. RCMT10T3M0-RK4 WKK20S — Turning indexable insert, 7° clearance, Tiger‑tec Silver (Walter Tools) The RCMT10T3M0-RK4 WKK20S is a round turning insert engineered for productive machining of cast iron, combining a Tiger‑tec Silver coating and an RK4 chipbreaker for consistent short-chip formation. Tiger‑tec Silver coating for wear resistance Optimised for cast iron (ISO K) Round insert, 10 mm form factor RK4 chipbreaker for short chips Faster, more consistent machining of cast iron components The coated carbide grade WKK20S is designed to deliver stable wear behaviour when machining abrasive cast iron. By combining a wear-optimised substrate with the Tiger‑tec Silver coating, this insert extends tool life and reduces unscheduled changes, which directly supports higher machine uptime and repeatable cycle times. The data-driven choice of a 7° clearance geometry and a round insert form improves engagement angles and reduces cutting forces, resulting in predictable cutting conditions and fewer load peaks during roughing operations. Reliable chip control and surface integrity for downstream processes A reliable chipbreaker is essential for cast iron; the RK4 geometry produces short, controllable chips that evacuate cleanly from the cut. Short-chip formation reduces the risk of surface damage and eases automatic chip handling, which benefits both manual and automated production cells. In addition to improved chip control, the coated surface promotes consistent edge condition, supporting a steady surface finish and minimising rework on subsequent operations. Practical handling and integration into production workflows The insert’s round shape provides versatility across turning, profiling and light shoulder work, while the T3 thickness stabilises the cutting edge under interrupted cuts common in cast-iron components. This geometry simplifies tooling setup and reduces the number of different insert types required in a toolholder inventory. Designed for industrial environments, the grade and chipbreaker combination support a cost-effective balance between performance and tool consumption, helping to lower per-part tooling costs and streamline inventory management. Discuss application parameters and ordering with Metav Werkzeuge to match cutting data and holder systems; the team can advise on speeds, feeds and clamping for optimal performance Technical Data SKU: RCMT10T3M0-RK4-WKK20S-WALTER Designation: RCMT10T3M0-RK4 WKK20S Product type: Turning indexable insert Manufacturer: Walter Tools Facts Insert form size: 10 Plate thickness: T3 Relief angle: 7° Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RK4 Shape: Round Application: Cast iron (ISO K) Series: Tiger‑tec Silver FAQ What materials is this insert intended for? The RCMT10T3M0-RK4 WKK20S insert is optimised for machining cast iron (ISO K) and is designed to handle the abrasive and brittle chip formation typical of these materials. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating on the WKK20S grade improves wear resistance and thermal stability, extending edge life and maintaining consistent cutting conditions when machining cast iron. What advantage does the RK4 chipbreaker provide? The RK4 geometry produces short, manageable chips that evacuate reliably, reducing surface damage risk and simplifying chip handling in automated or manual setups. Is this insert suitable for interrupted cuts? Yes—the T3 thickness and round form offer edge robustness that helps absorb impacts from interrupted cuts, making this insert suitable for many common turning operations in cast-iron machining. Can this grade be used for finishing operations? While optimised for productive roughing and semi-finishing on cast iron, the insert can achieve satisfactory finishes when cutting parameters are adjusted; consult tooling data for recommended feeds and speeds. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Die Walter AG mit Hauptsitz in Tübingen gehört zum Sandvik‑Konzern. Manufacturer/Responsible: Walter AG; Tübingen; Germany
RCMT10T3M0-RM4 WMP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP20G grade together with the RM4 chipbreaker to secure stable chip formation and extended edge life in stainless steel turning. Order the RCMT10T3M0-RM4 WMP20G directly via Metav Werkzeuge or consult the advisors for process optimisation. RCMT10T3M0-RM4 WMP20G — Round turning insert (7° clearance) for stainless steel | Walter Tools A RCMT10T3M0-RM4 WMP20G round indexable insert engineered for reliable turning of stainless steel under medium to robust cutting conditions Tiger·tec Gold coated grade WMP20G RM4 chipbreaker for secure chip control 7° clearance angle for reduced friction Round geometry, T3 thickness, size 10 Stable chip control improves machining uptime The combination of the RM4 chipbreaker and the Tiger·tec Gold coating provides consistent chip formation when machining stainless steel, a material group prone to adhesion and built-up edge. The chipformer design actively directs and breaks chips to avoid long, stringy chips that interrupt production, which in turn reduces unplanned stoppages and tool changes. This yields a measurable increase in process reliability and contributes to a smoother production flow during medium and robust turning operations. Longer tool life through optimised coating and geometry The coated carbide grade WMP20G is formulated to resist the thermal and adhesive challenges presented by stainless steel. The thin but durable coating reduces flank wear and improves resistance to edge breakdown under oscillating cutting temperatures. Combined with the insert’s round geometry and T3 thickness, the result is a robust cutting edge that tolerates interrupted cuts and maintains dimensional stability. Coated carbide here means a cemented carbide substrate with a wear-resistant multilayer coating, engineered for longevity and repeatable performance. Practical integration for production environments Round indexable inserts like this one simplify toolholder setup and favour consistent engagement on varying part geometries. The 7° clearance reduces rubbing at the flank, lowering heat generation and improving surface finish in many stainless-steel turning tasks. The insert is intended for ISO group M applications and is particularly suited to semi-finishing and finishing passes where secure chip formation and edge stability are priorities. For specific toolholder recommendations and cutting parameter tuning, technical consultation is available to match the insert to a given machine and application. For reliable turning of stainless steel with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored recommendations and order support: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: RCMT10T3M0-RM4-WMP20G-WALTER Label: Drehwendeschneidplatte RCMT10T3M0-RM4 WMP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Clearance angle: 7° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Series: Tiger-tec Gold Grade: WMP20G Chipbreaker: RM4 Shape: Round Base material: coated carbide Suitable for stainless steel FAQ What materials is this insert designed for? The RCMT10T3M0-RM4 WMP20G is designed primarily for stainless steel (ISO group M), offering secure chip formation and stable cutting edges under medium to robust conditions. How does the RM4 chipbreaker affect machining performance? The RM4 chipbreaker supports controlled chip breaking and evacuation, reducing the risk of long, stringy chips and improving uptime when using the WMP20G grade on stainless steel. Is the Tiger·tec Gold coating suitable for elevated cutting temperatures? Yes, the Tiger·tec Gold coating used on the WMP20G grade enhances thermal resistance and wear protection, contributing to longer tool life in demanding stainless-steel applications. Which toolholders are compatible with this round insert? Round indexable inserts of this form are compatible with toolholders designed for RCMT-style geometry; check the holder’s clamping diameter and seat to ensure correct fit and secure clamping for the RCMT10T3M0-RM4 WMP20G. Can this insert be used for interrupted cuts and heavy engagement? The combination of T3 thickness and the coated carbide grade provides robustness for interrupted cuts and heavier engagement typical in medium to robust turning tasks on stainless steel. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, brand-new goods from the manufacturer.
RCMT10T3M0-RM4 WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, targeted chip control and robust coating for efficient turning of stainless steels; order the insert through Metav Werkzeuge or consult the technical team for application advice. RCMT10T3M0-RM4 WMP20S – Round indexable turning insert, Tiger·tec Silver coating, Walter Tools RCMT10T3M0-RM4 WMP20S is a round indexable turning insert designed for secure chip formation when machining stainless steels in medium to robust conditions. Tiger·tec Silver coating for durable edges Optimised RM4 chipbreaker for stainless steel chips Round insert for flexible plunge and profile turning 7° clearance angle for stable cutting geometry Reliable chip control for stainless steels The combination of the Tiger·tec Silver coating and the WMP20S grade provides reliable chip control when machining stainless steel. The integrated RM4 chipbreaker supports consistent chip segmentation under the higher temperatures and ductility typical of these alloys, reducing the risk of built-up edge and improving surface integrity. This results in fewer process interruptions and more predictable cycle times in production environments where stable chip evacuation is essential. Longer tool life with consistent cutting edges The coated carbide grade is formulated for medium to robust cutting conditions and is optimised to maintain a sharp and stable cutting edge. The coating technology contributes to improved wear resistance, which translates into fewer index changes and longer tool life under typical turning loads. For operations aiming to increase uptime and reduce tooling handling, the material and coating synergy offers a measurable improvement in edge retention and repeatability. Versatile geometry for productive turning operations The round insert form factor, combined with a 7° clearance angle and a compact T3 thickness, enables flexible use in plunging, profiling and light to medium shoulder cuts. The RCMT designation indicates a style that fits a wide range of standard toolholders, allowing integration into existing tooling systems without major adjustments. The geometrical choice supports consistent engagement and contributes to a dependable machining process, especially when working with tougher stainless grades that demand stable cutting conditions. Application-focused benefits for workshop and production Designed specifically for stainless steels, this insert reduces the need for constant process tuning. The coated carbide composition and chipbreaker design ease the challenges of heat generation and material adhesion during cutting. In practical terms, this delivers improved surface finish and fewer secondary operations, which supports productivity goals in both batch production and continuous manufacturing environments. Contact Metav Werkzeuge for tailored cutting data or to discuss toolholder compatibility for Walter Tools inserts; the Metav Werkzeuge team can provide application advice and supply options by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: RCMT10T3M0-RM4-WMP20S-WALTER Name: RCMT10T3M0-RM4 WMP20S Manufacturer: Walter Tools Product type: Indexable turning insert Facts Inscribed circle / size: 10 Clearance angle: 7° Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: RM4 Plate form: Round Execution: T Suitable for: stainless steel FAQ What material is this insert optimised for? The RCMT10T3M0-RM4 WMP20S insert is optimised for stainless steel machining; the Tiger·tec Silver coating and RM4 chipbreaker support secure chip formation in these alloys. Can the insert be used for heavy-duty turning? The WMP20S grade is designed for medium to robust conditions; for consistently heavy-duty applications, process parameters should be evaluated to confirm suitable cutting data with this insert. Which chip behaviour can be expected with the RM4 breaker? The RM4 chipbreaker promotes segmented chips and improved evacuation when turning stainless steel, helping to reduce built-up edge and improving surface finish stability. Is this geometry compatible with standard toolholders? The RCMT-style insert fits common round-indexable turning toolholders; confirm seat and clamping details against the toolholder specification before use. How does the Tiger·tec Silver coating affect productivity? The coating enhances edge life and wear resistance, which typically reduces the frequency of index changes and supports longer uninterrupted production runs with consistent part quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
RCMT10T3M0-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Die Kombination aus Tiger‑tec Silver‑Beschichtung, WSM20S‑Sorte und dem RM4‑Spanformer sorgt für stabile Spanbildung und zuverlässige Schnittergebnisse bei der Bearbeitung anspruchsvoller Werkstoffe; die runde Ausführung mit 7° Freiwinkel unterstützt sichere Schneidkantenstabilität. Bestellungen und fachliche Beratung über Metav Werkzeuge sind möglich, alternativ steht das Beratungsteam für technische Fragen zur Verfügung. RCMT10T3M0-RM4 WSM20S turning insert – Tiger‑tec Silver, RM4 chipbreaker (Walter Tools) RCMT10T3M0-RM4 WSM20S is a round turning indexable insert designed for heavy‑duty cuts in challenging materials, combining a wear‑resistant coating with an optimised chip control geometry. Tiger‑tec Silver coating for long life Optimised RM4 chipbreaker for secure chips For rostfreier Stahl and heat‑resistant alloys Round insert with 7° relief for stability High performance where material resistance matters The Tiger‑tec Silver coating together with the WSM20S grade delivers a combination of heat resistance and edge stability that reduces flank wear and maintains a consistent cutting edge during long cycles. For machining rostfreier Stahl and heat‑resistant superalloys, the coated cemented carbide substrate provides improved thermal stability and abrasion resistance; this curtails unplanned tool changes and supports predictable component tolerances. The round geometry enhances radial strength, making the insert suitable for interrupted cuts and operations where edge robustness is critical. Controlled chip formation and process reliability Equipped with the RM4 chipbreaker, this insert promotes stable chip segmentation and evacuation, which reduces the risk of built‑up edge and improves surface finish. The optimised chip flow lowers the incidence of rework and shortens downstream cleaning effort, contributing to a more efficient production sequence. The tolerance class M and the specified relief of 7° support repeatable seating and force distribution in the toolholder, which helps sustain machining accuracy across batches. Practical benefits for workshop productivity The insert’s specification (round shape, nominal size 10, thickness T3) offers a simple, robust geometry that is easy to index and rotate, increasing usable tool life per insert. For operations that prioritise uptime and consistency, the combination of coating technology and grade selection reduces process variability and supports higher cutting parameters where the workpiece allows. This results in improved cycle times or longer intervals between insert replacements—both tangible gains for mid‑ to high‑volume manufacturing. Contact Metav Werkzeuge for tailored recommendations on tooling and grade selection; order the Walter Tools Tiger‑tec Silver WSM20S inserts via Metav Werkzeuge or request application guidance at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: RCMT10T3M0-RM4-WSM20S-WALTER Manufacturer: Walter Tools Product type: Turning indexable insert ISO designation: RCMT10T3M0-RM4 WSM20S Facts Plate size: 10 Plate thickness: T3 Relief / clearance angle: 7° Tolerance class: M Grade / sort: WSM20S Series: Tiger‑tec Silver Chipbreaker: RM4 Special features Coating: Tiger‑tec Silver (coated carbide) Material suitability: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) Shape: Round Intended application: Heavy‑duty and demanding turning operations Designation without grade: RCMT10T3M0-RM4 FAQ What materials is this insert suitable for? The insert is specified for machining rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S); the WSM20S grade supports secure chip formation and edge stability in these materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal and abrasive resistance on the cutting edge, extending tool life and enabling more consistent machining when working with tough alloys. What benefits does the RM4 chipbreaker provide? The RM4 chipbreaker controls chip shape and evacuation, reducing the risk of built‑up edge and improving surface finish while supporting higher process reliability. Is the round geometry advantageous for interrupted cuts? Yes; the round insert design enhances radial strength and edge robustness, making it well suited to interrupted cuts and unstable engagement conditions. Which tolerance and relief angle should be considered for toolholder selection? The insert is supplied in tolerance class M with a 7° relief angle; matching toolholder clamping surfaces to these specs ensures proper seating and repeatable accuracy. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Die Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the referenced brands and is mentioned for clarification of product origin.
RCMT10T3M0-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the RM4 chipbreaker and a 7° clearance delivers improved edge stability and consistent chip control for demanding materials; this round RCMT insert is therefore a practical choice for productive stainless steel and superalloy turning. Order the RCMT10T3M0-RM4 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. RCMT10T3M0-RM4 WSM30S indexable turning insert — Walter Tools, Tiger·tec Silver coating, RM4 chipbreaker A RCMT10T3M0-RM4 WSM30S indexable insert designed for productive turning of stainless steels and heat-resistant superalloys, combining a robust geometry with heat-resistant coating for stable performance. Tiger·tec Silver coating for heat resistance RM4 chipbreaker for stable chip formation 7° clearance for reliable cutting geometry Round RCMT form, 10 mm diameter, T3 thickness Engineered for demanding stainless and superalloy machining The insert uses the Tiger·tec Silver coating technology, a coated carbide grade optimised for temperature resistance and abrasive wear. This results in reliable edge stability when machining stainless steels and superalloys, materials that typically generate heat and tend to work-harden. The round RCMT form with a 7° clearance offers multiple cutting orientations, which helps in distributing wear and simplifies process planning. For workshop managers, this means fewer insert changes and more predictable cycle times, supporting higher uptime on turning operations. Consistent chip control to maintain process reliability The RM4 chipbreaker is configured to promote controlled chip formation under varying cutting parameters. By encouraging short, segmented chips rather than long, stringy swarf, the geometry reduces the risk of tool damage and workpiece surface degradation. In practice, this translates to smoother production runs and reduced secondary operations for chip management. The coated carbide substrate further aids thermal resistance, so the tool maintains geometry and cutting performance during longer cuts or interrupted machining. Robust geometry that simplifies tooling choices The round insert shape and T3 thickness offer mechanical strength and the flexibility to index the cutting edge multiple times, extending usable life per insert. The insert’s designation and tolerance class deliver consistent interchangeability in toolholders designed for RCMT forms, easing inventory and tool changeover. For engineers setting up process sheets, the clear material classification (suitable for stainless steels and superalloys) narrows down cutting data choices and reduces trial-and-error during ramp-up, supporting leaner production preparation. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools Tiger·tec Silver RCMT10T3M0-RM4 WSM30S inserts for demanding stainless and superalloy turning Technical Data SKU: RCMT10T3M0-RM4-WSM30S-WALTER Product type: indexable turning insert (turning insert) Designation: RCMT10T3M0-RM4 WSM30S Brand: Walter Tools Facts Clearance angle: 7° Insert form: Round (RCMT) Size designation: 10 Thickness: T3 Tolerance class: M Special features Coating series: Tiger·tec Silver Grade/sort: WSM30S (coated carbide) Chipbreaker: RM4 Material suitability: stainless steels (M), heat‑resistant superalloys and titanium (S) Application focus: heavy duty and difficult-to-machine materials FAQ What materials is this insert suitable for? The RCMT10T3M0-RM4 WSM30S is designed for stainless steels (M) and heat‑resistant superalloys or titanium (S), using the Tiger·tec Silver grade to handle elevated temperatures and abrasive conditions. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes short, controllable chips, which improves process reliability and reduces risk of chip entanglement during turning with this Walter Tools insert. Can this insert be indexed multiple times? Yes, the round RCMT form and T3 thickness permit multiple edge orientations and indexing, extending usable life per insert and simplifying inventory management. Is this insert compatible with standard RCMT toolholders? The RCMT designation and tolerance class M ensure compatibility with toolholders designed for RCMT inserts; verify holder specifications before assembly. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal resistance and wear protection, supporting longer edge life and consistent surface finish when machining demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is a leading manufacturer of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product from the manufacturer.
RCMT10T3M0-RP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the RP4 chipbreaker to achieve stable chip formation, consistent tool life and reliable steel machining; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. RCMT10T3M0-RP4 WPP10G indexable turning insert – Tiger‑tec Gold, RP4 chipbreaker (Walter Tools) for steel RCMT10T3M0-RP4 WPP10G is an indexable turning insert designed for precise, productive steel turning, combining a Tiger‑tec Gold coating with RP4 chip control in a round insert format. Tiger‑tec Gold coated carbide grade WPP10G RP4 chipbreaker for stable chip formation 7° clearance angle for consistent cutting Round insert RCMT10, thickness T3 Precision and process reliability for steel turning The combination of the Tiger‑tec Gold coating and the WPP10G grade provides a balance of wear resistance and toughness that improves tool life under typical steel cutting conditions. The RP4 chipbreaker is engineered to produce short, controllable chips, reducing interruptions and the risk of built-up edge. These technical choices translate directly into higher process stability and fewer tool changes, which benefits throughput and machine availability in production environments. The round insert geometry also supports a variety of turning operations by allowing multiple cutting edges per index. Optimised for ISO P applications and consistent results Designed for the ISO P material group, this insert is suitable for unalloyed and alloyed steel, where the thermal and chip-formation behaviour differs from non-ferrous materials. The coated carbide construction helps manage the heat at the cutting zone and maintain edge integrity, while the tolerance class M ensures repeatable seating and dimensional accuracy in pockets. For shops seeking predictable surface finish and long tool life, the engineered coating and substrate combination reduces the need for frequent monitoring and adjustment. Practical benefits at the machine and shop floor The insert’s geometry—round form, thickness T3 and clearance 7°—supports versatile application in turning operations where durability and edge stability matter. The RCMT designation denotes the insert form and pocket fitment for standard toolholders, enabling quick changeovers and predictable clamping. With a focus on productivity, the grade and chipbreaker are selected to minimise risk of built-up edge and optimise cutting conditions, allowing operators to maintain steady feed and speed settings with fewer interruptions. Contact Metav Werkzeuge for availability and tailored advice on Walter Tools Tiger‑tec Gold inserts; specialists can recommend the optimal grade and chipbreaker for specific steel turning tasks Technical data Article number: RCMT10T3M0-RP4-WPP10G-WALTER Name: RCMT10T3M0-RP4 WPP10G Type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Core specifications Plate size: 10 Thickness: T3 Clearance angle: 7° Tolerance class: M Special features Grade: WPP10G Coating technology: Tiger‑tec Gold (coated carbide) Chipbreaker: RP4 Shape: round Series: Tiger‑tec Gold Applicable material group: steel (ISO P) Designation without grade: RCMT10T3M0-RP4 FAQ What materials is this insert intended for? The RCMT10T3M0-RP4 WPP10G is intended primarily for ISO P applications, meaning it is optimised for machining various types of steel. How does the RP4 chipbreaker benefit production? The RP4 chipbreaker promotes short, consistent chips and stabilises chip flow; this reduces machine stoppages and improves the overall productivity of Walter Tools turning inserts. Is the Tiger‑tec Gold coating suitable for interrupted cuts? Yes, the Tiger‑tec Gold coating on the WPP10G grade increases resistance to thermal and mechanical wear, making the insert robust in many interrupted and continuous turning scenarios. What does the RCMT designation indicate for toolholders? RCMT indicates the insert shape and geometry compatible with standard turning toolholders; the RCMT10T3M0-RP4 form ensures predictable seating and clamping in matching toolholder pockets. How does the tolerance class M affect performance? Tolerance class M provides a standardised dimensional accuracy for consistent seating and repeatable results, supporting dependable indexing and tool life across insert changes. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is a leading global manufacturer of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for clarification; there is no affiliation between our company and the named manufacturers. The offered item is original, factory‑new merchandise of the stated manufacturer.
RCMT10T3M0-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, stable RP4 chip control and robust coated-carbide performance for efficient steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. RCMT10T3M0-RP4 WPP20G – Round turning indexable insert for steel, Tiger‑tec Gold (Walter Tools) The RCMT10T3M0-RP4 WPP20G is a round turning indexable insert designed for ISO P (steel) applications, offering a Tiger‑tec Gold coated cemented carbide grade and an RP4 chipbreaker for dependable chip formation and consistent productivity. Tiger·tec Gold coated carbide grade WPP20G Optimised for steel machining (ISO P) RP4 chipbreaker for stable chip control Round insert Ø10 with 7° clearance Boosted productivity through targeted grade and geometry The combination of the WPP20G grade and a dedicated RP4 chipbreaker delivers measurable productivity improvements when machining steel. The coated cemented carbide composition is formulated for the heat and chip formation typical of P-group materials, which results in stable cutting behaviour and extended tool life. This means fewer tool changes and higher machine uptime, supporting leaner cycle times and more consistent production output. Predictable chip control and improved surface finish The round geometry and RP4 chipbreaker are engineered to manage chip flow effectively during turning operations. Controlled chip formation reduces interruptions and facilitates stable cutting at varying depths of cut. As a result, users can expect improved surface quality and fewer secondary operations. The geometry also helps to maintain a reliable cutting edge, translating into repeatable component quality across batches. Coating advantages explained for non-specialists The Tiger‑tec Gold coating is a multi-layer PVD/CVD-inspired technology that strengthens the cutting edge and reduces wear mechanisms. For those unfamiliar with coating terminology: the coating acts as a protective barrier that lowers friction and improves heat resistance, which is especially beneficial when machining steels that generate high temperatures. The net effect is longer tool life and consistent performance under industrial turning conditions. Practical integration into workshop processes With a compact design (round insert, Ø10) and a 7° clearance angle, this insert fits standard round-insert toolholders and is suitable for a broad range of general turning tasks in steel. The T3 thickness and medium tolerance class M offer a balance between rigidity and interchangeability, enabling secure clamping and predictable repeatability. The insert’s attributes make it a pragmatic choice for production environments seeking robust, easy-to-implement cutting solutions. For reliable, process-secure turning with Walter Tools’ Tiger‑tec Gold inserts, request the RCMT10T3M0-RP4 WPP20G from Metav Werkzeuge and benefit from tailored application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: RCMT10T3M0-RP4-WPP20G-WALTER Article: RCMT10T3M0-RP4 WPP20G Product type: Turning indexable insert Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Size: 10 mm Thickness: T3 Clearance angle: 7° Tolerance class: M Special features Coating: Tiger‑tec Gold (coated cemented carbide) Chipbreaker: RP4 Applicable material: Steel (ISO P) Insert shape: Round FAQ What materials is this insert suitable for? This insert is specified for steel (ISO P) applications; the Walter Tools RCMT10T3M0-RP4 WPP20G grade is tuned to the heat and chip characteristics of unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this RCMT10T3M0-RP4 WPP20G insert promotes controlled chip formation, reducing interruptions and improving surface finish during turning operations. Can the insert be used in standard round-insert toolholders? Yes, the round form and Ø10 size are compatible with common round-insert toolholders; the T3 thickness and M tolerance class provide secure clamping and interchangeability. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances wear resistance and heat management on the cutting edge, resulting in extended tool life and consistent cutting performance when machining steels. Is this an original manufacturer product? The item is offered as original factory-new goods from Walter Tools, referenced by SKU RCMT10T3M0-RP4-WPP20G-WALTER. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
RCMT10T3M0-RP4 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coated carbide, precise RP4 chip control and a compact RCMT 10 round form for efficient steel turning; order directly via Metav Werkzeuge or ask the consultants for machining recommendations. RCMT10T3M0-RP4 WPP30G turning insert — Tiger·tec Gold coated for steel machining (ISO P) by Walter Tools RCMT10T3M0-RP4 WPP30G is a coated carbide turning insert designed for reliable metalcutting in steel applications, delivering consistent chip control and extended tool life. Tiger·tec Gold coated carbide grade WPP30G Optimised RP4 chipbreaker for reliable chip control Designed for steel machining (ISO group P) Round RCMT 10 insert with 7° clearance Longer tool life and higher process stability through Tiger·tec Gold The Tiger·tec Gold coating in the WPP30G grade combines a wear-resistant, multilayered surface with a substrate engineered for demanding conditions, resulting in improved tool life and stable cutting edges under typical steel machining heat and loads. This coating reduces flank wear and increases resistance to abrasive abrasion, which means fewer insert changes and more predictable production cycles. For production environments this translates into higher uptime and lower cost per part while maintaining consistent dimensional repeatability. Predictable chips and improved surface quality from the RP4 geometry The RP4 chipbreaker is optimised for ISO group P (steel) and promotes controlled chip formation, preventing stringing and minimising interrupted contact at the cutting zone. The round insert geometry together with the 7° clearance helps distribute cutting forces and reduces vibration, which benefits the resulting surface finish and tool life. For operators less familiar with chipbreaker terminology: the chipbreaker channels the metal flow away from the cutting edge, so chips break reliably and coolant access improves, reducing the risk of built-up edge on the insert. Compact form and easy integration for productive workshops The RCMT round form with nominal 10 mm inscribed circle and T3 thickness offers a compact solution for close-quarters turning and finishing passes where accessibility and rigidity are critical. The insert’s tolerance class M ensures consistent fit in standard toolholders, and the RP4 geometry provides versatility across roughing and light finishing operations in steel. The combination of these features supports predictable cycle times and straightforward tool inventory management for job shops and production departments alike. For application advice or to procure Walter Tools inserts with Tiger·tec Gold, contact Metav Werkzeuge for tailored recommendations and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RCMT10T3M0-RP4-WPP30G-WALTER SKU: RCMT10T3M0-RP4-WPP30G-WALTER Product type: Drehwendeschneidplatte (turning insert) Designation: RCMT10T3M0-RP4 WPP30G Manufacturer: Walter Tools Facts Size: 10 mm Thickness: T3 Clearance angle: 7° Shape: Round Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP4 Application group: ISO P (steel) Series: Tiger-tec Gold FAQ What materials is this insert suitable for? The RCMT10T3M0-RP4 WPP30G insert is formulated for steel machining (ISO group P) and excels where stable chip formation and heat resistance are required. What benefit does the RP4 chipbreaker provide? The RP4 chipbreaker promotes controlled chip formation and evacuation, reducing entanglement and improving surface finish when machining steel with the WPP30G grade. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold increases wear resistance and edge stability on the insert, resulting in longer tool life and more consistent cutting conditions during steel turning operations. Is the insert compatible with standard toolholders? Yes, the RCMT round form in 10 mm size and tolerance class M fits standard toolholders designed for RCMT inserts and supports easy replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT120400-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, an RM4 chipbreaker and a round RCMT geometry for stable machining of stainless steels and heat‑resistant alloys; the result is improved process reliability and reduced rework. Order the RCMT120400-RM4 WSM20S turning insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT120400-RM4 WSM20S — Indexable turning insert, Tiger·tec Silver, RM4 chipbreaker (Walter Tools) The RCMT120400-RM4 WSM20S is a coated tungsten‑carbide indexable turning insert engineered for secure chip control and thermal stability when machining stainless steels and superalloys Tiger·tec Silver coating for heat resistance RM4 chipbreaker for consistent chip form Round RCMT geometry for profiling tasks Optimised for stainless steels and superalloys Stable chip control that reduces interruptions The combination of the RM4 chipbreaker with Walter’s coating technology promotes a consistent chip shape and reliable evacuation under interrupted and continuous cuts. That controlled chip formation reduces tool‑clamping incidents and machine stoppages, which in turn maintains cycle time and lowers the risk of surface damage. The practical effect on the shop floor is fewer tool changes and improved process throughput. High thermal endurance for demanding materials The insert’s WSM20S grade, applied within the Tiger·tec Silver series, is a coated carbide formulation designed for materials that generate heat and tend to form built‑up edge. This thermal resistance supports longer edge life when turning stainless steel and heat‑resistant superalloys, enabling more consistent component tolerances and fewer regrinds. The result is predictable tool life and greater confidence in finishing passes. Geometry tailored for profiling and stability A round RCMT form with an inscribed circle of 12 mm and the specified 7° clearance produces a secure cutting edge suited to profiling, radius turning and special contour work. The zero nose radius specification provides a defined cutting point for precise detail work while the round‑form strength helps absorb cutting forces. This geometry balances finish quality with edge robustness, supporting both roughing and finishing operations depending on insert seat and toolholder selection. Measurable shop benefits and process confidence Using this indexable insert leads to tangible improvements: enhanced process security, stable cutting edges and dependable surface quality. The Tiger·tec Silver technology and the RM4 chipbreaker combine to reduce edge build‑up and promote stable swarf control, which lowers scrap rates and improves first‑pass yield. For production environments machining corrosive or high‑temperature alloys, this translates into predictable outputs and reduced unplanned downtime—key criteria for competitive manufacturing. Contact Metav Werkzeuge today to discuss how the Walter Tools RCMT120400-RM4 WSM20S insert can be matched to specific materials and cutting parameters, and to confirm current availability and delivery options at Metav Werkzeuge. Technical Data Article number: RCMT120400-RM4-WSM20S-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Grade/series: WSM20S, Tiger·tec Silver Numbers / Core technical data Relief angle: 7° Nose radius: 0 Inscribed circle / size: 12 Thickness: 04 Tolerance class: M Designs / Special features Round RCMT plate form Chipbreaker: RM4 Applicable material groups: S / M (superalloys, titanium; stainless steel) Execution: T Coated carbide grade within Tiger·tec Silver FAQ What materials is this insert suitable for? The RCMT120400-RM4 WSM20S insert is optimised for stainless steel and heat‑resistant superalloys (groups S and M), reflecting the WSM20S grade and Tiger·tec Silver coating performance. Which chip behaviour can be expected with the RM4 chipbreaker? The RM4 chipbreaker on this insert promotes short, manageable chips and consistent swarf control, reducing the likelihood of entanglement and improving machining continuity with the RCMT geometry. Is this insert suitable for both roughing and finishing operations? Yes. The round RCMT shape and the grade’s thermal stability allow a versatile application range; toolholder setup and cutting data determine whether it is used for roughing or finishing. How does the Tiger·tec Silver series help with tool life? Tiger·tec Silver coating enhances edge resistance to heat and adhesive wear, which helps maintain cutting‑edge integrity under demanding thermal loads and extends effective tool life. Which SKU should be ordered for this specific configuration? Order SKU RCMT120400-RM4-WSM20S-WALTER to obtain the Walter Tools RCMT120400-RM4 WSM20S indexable insert in the Tiger·tec Silver series. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for descriptive purposes only; there is no affiliation between our company and the manufacturers mentioned. The item offered is original, factory‑new goods from the manufacturer.
RCMT120400-RP4 WPP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the RP4 chipbreaker for consistently productive steel turning; the round, 12-size insert with a 7° clearance angle delivers stable chip control and long tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. RCMT120400-RP4 WPP20G indexable turning insert — Tiger·tec Gold for steel (Walter Tools) RCMT120400-RP4 WPP20G is an indexable turning insert designed for ISO P (steel) machining, featuring a Tiger·tec Gold coated grade and an RP4 chipbreaker for reliable chip formation. RP4 chipbreaker for stable chip control Tiger·tec Gold coated carbide grade Suited for ISO P (steel) machining Round shape with 7° clearance angle Productive turning with consistent chip control The Tiger·tec Gold coating and the WPP20G grade combine to deliver a balance of wear resistance and edge stability tailored to steel machining. The integrated RP4 chipbreaker is engineered to produce manageable chips in typical steel turning operations, which reduces interruptions and maintains cycle times. For production environments seeking predictable tool life, this combination offers an economical and technically sound solution that supports steady throughput. Geometry designed for versatility and accessibility A round insert form provides multiple cutting-edge positions and enables turning at varied approach angles without tool reorientation. The 7° clearance angle helps to reduce flank rubbing and improves surface finish when cutting unalloyed and alloyed steels. The insert’s zero corner radius permits sharp profile detail where required, while the standard tolerance class M ensures interchangeability and consistent seating in toolholders, simplifying tool management on the shop floor. Clear specification for reliable selection Key technical attributes are presented to aid selection: the coated carbide WPP20G grade is intended for ISO P materials and offers improved process reliability across a broad range of steels. The combination of coating technology and chipbreaker design reduces the need for frequent edge changes, which contributes to lower tooling costs per part in medium to high-volume runs. When specifying tooling for steel turning, prioritising a proven grade and appropriate chip control leads to fewer stoppages and more consistent part quality. For machining operations that demand reliable performance with steel, contact Metav Werkzeuge for detailed advice and order handling — Metav Werkzeuge’s consultants can assist with grade selection and application recommendations. Technical Data Article number: RCMT120400-RP4-WPP20G-WALTER Product: RCMT120400-RP4 WPP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Data Size: 12 Thickness: 04 Clearance angle: 7° Corner radius: 0 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP4 Shape: round Application: steel (ISO P) FAQ What materials is this insert intended for? This insert is designed for ISO P materials; the WPP20G grade and Tiger·tec Gold coating are optimised for machining various steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker promotes stable chip formation during steel turning, improving process continuity and reducing the need for manual chip handling. Is the insert suitable for finishing and semi-finishing operations? Yes; the combination of the coated grade and the 7° clearance angle supports consistent surface quality in finishing and semi-finishing steel applications. How many cutting edges does the round insert provide? The round geometry allows multiple indexed cutting positions, enabling efficient edge use and longer service life between re-grinds or replacements. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1204M0-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and compatibility with demanding stainless steel machining for uninterrupted production. The coated carbide grade and optimised FM4 chipbreaker reduce rework and downtime. Order directly via Metav Werkzeuge or contact our consultants for selection support. RCMT1204M0-FM4 WMP20G — indexable turning insert for stainless steel by Walter Tools A RCMT1204M0-FM4 WMP20G indexable turning insert engineered for productive, medium-to-heavy machining of stainless steel, offering stable cutting-edge performance and controlled chip formation. Tiger·tec Gold coated carbide grade Optimised FM4 chipbreaker for stable chips Suitable for stainless steel machining Round insert, 7° clearance angle Higher productivity through proven coating technology The combination of Tiger·tec Gold coating and the WMP20G grade delivers a measurable improvement in cutting-edge robustness and wear resistance when machining stainless steel. Coated carbide provides a thermal and mechanical barrier that reduces flank wear and supports a consistent machining regime under moderate to robust cutting parameters. This results in fewer tool changes, better tool-cost efficiency and stable cycle times for series production, making the insert a pragmatic choice where process reliability and throughput matter. Design features that create reliable surface quality The insert’s FM4 chipbreaker and round insert geometry promote controlled chip flow and minimise built-up edge formation typical of stainless steel workpieces. The 7° clearance angle supports a predictable cutting engagement while the specified plate size and thickness provide mechanical stability in interrupted cuts. The design reduces the risk of edge chipping and supports a consistent surface finish — an advantage for shops aiming for repeatable component tolerances and reduced in-process scrap. Practical handling and application guidance The RCMT1204M0-FM4 WMP20G performs best in stable toolholders with correct seating to preserve tolerance class and repeatability. For medium to heavy passes on stainless steel, the coated carbide grade maintains the cutting edge and helps control temperature-induced edge degradation. If process selection or parameter optimisation is required, Metav Werkzeuge provides technical advice and material-specific recommendations to align cutting data with machine capability and workpiece requirements; contact details are provided below for quick clarification. For machining stainless steel with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored tool recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: RCMT1204M0-FM4-WMP20G-WALTER Designation: RCMT1204M0-FM4 WMP20G Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Facts Plate size: 12 Plate thickness: 04 Clearance angle: 7° Tolerance class: M Execution: T Special features Coating technology: Tiger·tec Gold Carbide class: coated carbide Chipbreaker: FM4 Shape: round Application: stainless steel Sort description: WMP20G for medium to robust conditions per manufacturer data FAQ What materials is this insert intended for? The RCMT1204M0-FM4 WMP20G insert is designed primarily for machining stainless steel, offering optimised performance for the typical toughness and heat sensitivity of these alloys. What advantages does the WMP20G grade provide? WMP20G, in the Tiger·tec Gold family, provides enhanced wear resistance and thermal stability; the grade supports longer tool life and reliable cutting performance in stainless steel applications. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes controlled chip breaking and evacuation, reducing the incidence of built-up edge and improving surface finish during turning of stainless steel. Which designation and dimensions identify this insert? The insert is designated RCMT1204M0-FM4 WMP20G (SKU RCMT1204M0-FM4-WMP20G-WALTER), with a plate size of 12, plate thickness 04 and a 7° clearance angle Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any association between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
RCMT1204M0-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WSM10S grade for secure chip control and extended tool life; the insert excels on stainless steels and heat‑resistant alloys and supports stable, productive turning operations. Order directly via Metav Werkzeuge or request personalised advice from our consultants. RCMT1204M0-FM4 WSM10S turning insert — Tiger·tec Silver grade, FM4 chipbreaker, 7° clearance (Walter Tools) A RCMT1204M0-FM4 WSM10S turning insert engineered for productive machining of stainless steels and heat‑resistant superalloys in demanding industrial turning applications Tiger·tec Silver coating technology WSM10S grade for stainless & superalloys FM4 chipbreaker for reliable chip control 7° clearance, round 12 mm form Higher process efficiency through proven grade and coating The combination of the WSM10S grade with Tiger·tec Silver coating delivers a tangible productivity advantage when machining tough materials. As a coated carbide grade, it is optimised for thermal stability and a stable cutting edge, which reduces unexpected tool changes and minimises downtime. The coating supports secure chip formation, lowering the risk of built‑up edge on stainless steels and similar alloys. For production planners, this means more consistent cycle times and predictable tool life — a clear rational benefit in batch and continuous turning operations. Dependable chip control and geometry for safer machining The FM4 chipbreaker is designed to manage chips reliably under elevated temperatures and forces typical of machining superalloys. Combined with the round insert form and a 7° clearance, the geometry promotes a controlled contact zone and smooth evacuation of chips, reducing vibration and the likelihood of surface defects. In practical terms, the geometry helps maintain component quality and reduces secondary finishing work, offering an efficient path to improved surface integrity and fewer rejects. Material scope and application advantage The insert is specified for ISO groups M and S, meaning it suits stainless steels and heat‑resistant superalloys (including titanium‑based alloys) respectively. The WSM10S grade emphasises heat resistance and edge robustness, allowing the insert to withstand the high temperatures and adhesive tendencies of these materials. For engineers working with demanding alloys, this translates into a reliable cutting solution that supports repeatable results and less process variation across production runs. Integration into tool systems and operational benefits With a compact 12 mm form and the common RCMT geometry, the insert integrates easily into standard turning toolholders, enabling quick index changes and consistent seating. The combination of coating, grade and chipbreaker offers not just tool life improvements but also economic gains through fewer tool interventions and improved machine uptime. For maintenance teams and planners, the reduced frequency of unexpected tool failures delivers lower indirect costs and a smoother workflow across workstations. For machining applications requiring consistent performance with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for tailored recommendations and availability — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert support. Technical data SKU: RCMT1204M0-FM4-WSM10S-WALTER Product: Drehwendeschneidplatte / turning insert Manufacturer: Walter Tools Grade: WSM10S Series: Tiger·tec Silver Facts Clearance angle: 7° Insert form: round Inscribed circle / size: 12 Thickness: 04 Chipbreaker: FM4 Tolerance class: M Features Coated carbide (Tiger·tec Silver) Suitable for ISO group M (stainless steels) Suitable for ISO group S (heat‑resistant superalloys, titanium) Stable cutting edge and secure chip formation Designed for productive turning applications FAQ What materials is this insert best suited for? The RCMT1204M0‑FM4 WSM10S turning insert is optimised for ISO group M (stainless steels) and S (heat‑resistant superalloys), providing thermal stability and edge strength for these demanding materials. How does the FM4 chipbreaker benefit production? The FM4 chipbreaker on this Walter Tools insert ensures controlled chip formation and evacuation, reducing the risk of entanglement and improving surface finish consistency during continuous turning tasks. Can this insert be used with standard RCMT toolholders? Yes, the RCMT geometry and 12 mm form factor allow straightforward compatibility with standard RCMT toolholders, enabling quick indexing and stable clamping in most turning systems. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1204M0-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high process security, dependable edge life and excellent chip control to maintain steady production with minimal interruptions; order the insert directly via Metav Werkzeuge or consult our specialists for application support. RCMT1204M0-FM4 WSM20S turning insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys (Round, 7°) — Walter Tools RCMT1204M0-FM4 WSM20S is a coated indexable insert designed for demanding turning tasks in heat-resistant alloys and rostfreier Stahl, offering reliable chip formation and long tool life Tiger‑tec Silver coated grade WSM20S Optimised chip former FM4 Round insert, 12 mm diameter 7° clearance angle for secure cutting Better throughput when machining tough alloys The Tiger‑tec Silver grade WSM20S is engineered for demanding conditions and provides improved thermal stability when machining superalloys and rostfreier Stahl. The coating technology increases resistance to high temperatures and supports a stable cutting edge, which reduces the frequency of insert changes and protects cycle times. With the FM4 chipformer, chips break predictably even under high cutting pressures, so component quality remains consistent and post‑process rework is minimised. This combination translates into measurable gains in efficiency and fewer unplanned stops on the shop floor. Predictable tool life and secure cutting behaviour Built for repeatable performance, the insert’s geometry and tolerance class M ensure dimensional consistency and reliable clamping in the toolholder. The 7° clearance angle reduces the risk of build‑up and improves surface finish on the workpiece, while the robust coated carbide substrate of WSM20S extends wear resistance under thermal and mechanical loads. These characteristics deliver lowered variance between batches and support predictable maintenance intervals, helping production planners meet tight delivery windows. Easy integration and clear machining benefits The round, 12 mm format and 04 thickness make the insert compatible with a wide range of toolholders that accept round indexable geometries, simplifying inventory and reducing setup time. The FM4 chip control geometry was developed to manage chip flow in interrupted cuts and deep turning operations, enhancing operator safety and reducing clamp‑on time. Given its suitability for rostfreier Stahl and high‑temperature alloys, this insert is particularly well matched to aeronautical, medical and energy sector components where material demands are high and surface integrity is critical. For tailored process recommendations for the Walter Tools RCMT1204M0-FM4 WSM20S insert, contact Metav Werkzeuge for expert application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RCMT1204M0-FM4-WSM20S-WALTER Designation: RCMT1204M0-FM4 WSM20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Shape: Round Chipformer: FM4 Free angle: 7° Tolerance class: M Execution: T Grade: WSM20S Material groups: S / M Core technical figures Insert diameter: 12 Thickness: 04 Free angle: 7° Tolerance class: M Special features Coating technology: Tiger‑tec Silver Grade type: WSM20S (coated carbide) Suitable for: rostfreier Stahl; superalloys and titanium Chip control: FM4 Format: round indexable insert FAQ What materials is this insert suitable for? The RCMT1204M0-FM4 WSM20S insert from Walter Tools is suitable for rostfreier Stahl and heat‑resistant superalloys (material groups S and M), providing stable cutting under high thermal loads. How does the FM4 chipformer improve machining? FM4 promotes consistent chip breaking and controlled evacuation; in the RCMT1204M0-FM4 WSM20S it reduces the risk of long swarf in interrupted cuts and supports safer, cleaner operation. Can this insert deliver a good surface finish on stainless components? Yes. The WSM20S grade with the Tiger‑tec Silver coating and a 7° clearance angle helps prevent build‑up and delivers improved surface integrity on rostfreier Stahl. Is the round 12 format compatible with standard toolholders? The round 12 mm geometry of RCMT1204M0-FM4 WSM20S fits common holders designed for round indexable inserts, easing tool change‑over and inventory management. What distinguishes the Tiger‑tec Silver series for long runs? Tiger‑tec Silver offers enhanced thermal resistance and a balanced coating architecture that extends edge life and maintains cutting stability during extended production runs. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
RCMT1204M0-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WSM30S grade for long tool life and secure chip control, plus the optimised FM4 chipbreaker and a 7° clearance for reliable machining of demanding alloys. Order the RCMT1204M0‑FM4 WSM30S directly via Metav Werkzeuge or consult our application specialists for cutting data. RCMT1204M0-FM4 WSM30S indexable turning insert — Tiger‑tec Silver, 7° clearance, Walter Tools A RCMT1204M0‑FM4 WSM30S indexable turning insert designed for demanding turning operations on stainless steels and heat‑resistant alloys, offering stable edge life and consistent chip control for productive workshops. Tiger‑tec Silver coated grade WSM30S Optimised FM4 chipbreaker 7° clearance for secure cutting Round RCMT form, 12 mm diameter Stable chip control for secure production The insert’s FM4 chipbreaker is engineered to promote consistent chip formation under variable cutting conditions. By controlling chip shape and evacuation, the geometry reduces the risk of chip entanglement and minimises interruptions during serial turning. This results in fewer stoppages, improved tool life and a predictable finish on workpieces made from tough alloys. The practical outcome is higher process stability and reduced secondary operations. Coating and grade engineered for long tool life Built on the Tiger‑tec Silver platform, the WSM30S grade combines a hard, wear‑resistant coating with a substrate optimised for thermal resilience. The coated carbide helps maintain a stable cutting edge when machining high‑temperature alloys and stainless steels, which typically generate heat and strain the cutting zone. That technical pairing translates into longer intervals between index changes and lower overall tooling cost per workpiece in batch production. Geometry and clearance that improve surface quality The round RCMT form and a 7° clearance angle contribute to a uniform contact pattern and reduced radial forces during turning. A moderate clearance angle supports edge strength while allowing precise plunge and profile turning where a round insert’s continuity is beneficial. Together, these geometric features support consistent surface integrity and repeatable dimensional control, especially when machining components that demand close tolerances. Application fit and material scope The insert is specified for materials classified under S / M: heat‑resistant superalloys and stainless steels. In practical terms, the grade and geometry are suited to components that require both thermal stability and edge robustness, such as turbine parts, fasteners in corrosive environments, and shafts with demanding surface requirements. For unfamiliar materials or mixed batches, consult machining data to adapt speeds and feeds to maintain the insert’s performance. Contact Metav Werkzeuge for tailored cutting data, batch pricing and local availability of Walter Tools Tiger‑tec Silver inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss optimal parameters for specific machines and materials Technical data Article number / SKU: RCMT1204M0-FM4-WSM30S-WALTER Designation: RCMT1204M0-FM4 WSM30S Series: Tiger‑tec Silver Grade: WSM30S Shape: Round (RCMT) Chipbreaker: FM4 Facts Insert size: 12 mm Thickness designation: 04 Clearance angle: 7° Tolerance class: M Special features Coating technology: Tiger‑tec Silver Suitable materials: S / M Application: Heavy or difficult‑to‑machine alloys and, depending on geometry, stainless steels Edge and grade: Coated carbide grade WSM30S for thermal stability and wear resistance FAQ What materials is this insert suitable for? The RCMT1204M0‑FM4 WSM30S insert is specified for S and M groups; it is intended primarily for heat‑resistant superalloys and stainless steels, where thermal stability and edge robustness are required. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the RCMT‑form insert promotes controlled chip formation and evacuation, improving process stability and reducing the likelihood of chip‑related interruptions in turning cycles. Can this insert be used for finishing operations? Yes, the combination of the Tiger‑tec Silver coating and the RCMT geometry supports consistent surface quality; adjust feed and speed to match the desired finish and the workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The item offered is original, factory‑new goods of the manufacturer Walter Tools. The Walter AG brand (Walter Tools) is a leading producer of precision tools and is part of the Sandvik Group.
RCMT1204M0-FP4 WPP10G Wendeplatten - Walter Tools
Benefit from the proven combination of Tiger‑tec Gold coating, precise FP4 chip control and a 7° clearance angle for efficient, repeatable turning of steel components; order via Metav Werkzeuge or consult our specialists for application support. RCMT1204M0-FP4 WPP10G — Round indexable turning insert, Tiger‑tec Gold, for steel — Walter Tools The RCMT1204M0-FP4 WPP10G is a round indexable turning insert with FP4 chipbreaker and Tiger‑tec Gold coating, engineered for reliable steel machining and consistent surface quality in production environments. Tiger‑tec Gold coated carbide Optimised FP4 chip control 7° clearance for robust engagement Round RCMT 12 insert for versatile turning High wear resistance for continuous turning The coated carbide used in the WPP10G grade delivers a balance of wear resistance and toughness that supports longer tool life in cyclic production. The Tiger‑tec Gold technology provides a multilayer coating structure that reduces flank wear and improves heat resistance during interrupted cuts. For manufacturing operations that demand consistent component quality, this result is a tangible reduction in downtime and fewer insert changes, supporting a more predictable machining process. Stable chip formation reduces secondary operations Equipped with the FP4 chipbreaker, this insert was developed to produce short, manageable chips when machining steel (material group P). Stable chip control reduces the need for manual chip handling and limits surface damage caused by uncontrolled swarf. The chip geometry is optimised for common turning strategies, enabling efficient evacuation at typical cutting feeds and contributing to improved cycle times and lower rework rates. Robust geometry for repeatable engagement The round form and the 7° clearance angle give the insert secure seating and predictable cutting engagement, especially useful for plunge cuts and off‑centre turning. The RCMT 12 form factor pairs well with standard clamping systems, offering simple indexation and predictable cutting forces. This geometry supports operators and CAM programmers in maintaining process stability across batch runs and part families. Application scope and practical guidance The WPP10G grade is specified for machining a broad range of steel types and combines tenacity for tougher cuts with surface quality suitable for finishing passes. When integrating the insert into an existing toolholder, ensure correct seat contact and torque to maintain the intended cutting geometry. For customers less familiar with grade selection, the combination of Tiger‑tec Gold and FP4 typically favours general turning where a balance of productivity and tool life is required. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools inserts: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: RCMT1204M0-FP4-WPP10G-WALTER Article: RCMT1204M0-FP4 WPP10G Type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Variant: T Facts Insert diameter / size: 12 mm Thickness: 4 mm Clearance angle: 7° Shape: Round (R) Tolerance class: M Special features Coating: Tiger‑tec Gold Grade: WPP10G (coated carbide) Chipbreaker: FP4 Material group: P (steel) Suitable for: general turning applications Designation without grade: RCMT1204M0-FP4 FAQ What materials is this insert suited for? The insert is designed for material group P, i.e. various types of steel; the WPP10G grade and Tiger‑tec Gold coating optimise performance for steel machining. What does the FP4 chipbreaker provide? The FP4 chipbreaker offers controlled chip formation for turning operations, improving swarf management and reducing the likelihood of surface damage. How does the 7° clearance angle affect cutting? A 7° clearance angle helps maintain secure engagement and reduces rubbing on the flank, contributing to prolonged flank life and stable cutting conditions. Is the RCMT1204M0-FP4 WPP10G suitable for finishing passes? Yes; due to the coating and grade balance, the insert can be used for finishing where a good surface finish is required, provided cutting parameters are adjusted accordingly. How is the insert indexed and secured? The round RCMT form is indexed using the corresponding toolholder seat; correct seating and clamping torque are important to preserve geometry and repeatability. Walter Tools is part of a global family of precision tooling brands. Protected trademarks and trade names belong to their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation between our company and the manufacturers. The offered item is an original, factory‑new product of the listed manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
RCMT1204M0-FP4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the FP4 chipbreaker for stable machining of steel; the round 12 mm form and 7° relief ensure versatile, reliable turning performance — order genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for cutting data and optimisation. RCMT1204M0-FP4 WPP20G – Turning insert for steel, Walter Tools (Tiger·tec Gold) A RCMT1204M0-FP4 WPP20G turning insert engineered for robust steel machining, offering durable coated-carbide performance and optimised chip control for consistent production. Tiger·tec Gold coating for high wear resistance Optimised FP4 chipbreaker for stable chip control Round form, 12 mm size for flexible turning 7° relief for reliable edge engagement Consistent cutting performance with reduced tool change The combination of the WPP20G grade and Tiger·tec Gold coating provides a balance between wear resistance and toughness tailored to steel (ISO group P). This coated-carbide composition helps maintain cutting-edge integrity under the heat and forces typical of steel turning, which translates into fewer tool changes and more predictable cycle times. The result is improved machine uptime and a direct reduction in per-part tooling cost without compromising finish quality. Reliable chip formation that protects cycle time The engineered FP4 chipbreaker delivers controlled chip segmentation during turning operations, reducing the risk of long, entangling chips and minimising interruptions. Combined with the round insert geometry, the chip control supports stable cutting conditions and easier handling of variable depths of cut. Practically, this means more consistent surface finishes and fewer operator interventions, enhancing process security on medium- to high-volume production runs. Versatile geometry for flexible application planning The insert’s 12 mm size and round form offer a resilient cutting edge suitable for a wide range of turning tasks. The 7° relief angle reduces flank contact, improving engagement at entry and exit and supporting a stable cutting action across different feeds and speeds. With tolerance class M and the coated-carbide substrate, the product is engineered for integration into established toolholders and routines, enabling simple tooling standardisation across a shop floor. Productivity and planning benefits for production managers Adopting this grade contributes to measurable efficiency: longer tool life lowers consumption rates while the insert’s stability reduces rework and rejects. The balancing of universality and wear resistance in the grade supports a broad scope of steel applications, allowing planners to limit tool variants. For further application-specific cutting data or optimisation advice, the technical team at Metav Werkzeuge can provide recommendations and empirical parameters to help maximise output and minimise costs. Contact Metav Werkzeuge for tailored cutting data, genuine Walter Tools inserts and application advice for immediate process improvement Technical data Article number: RCMT1204M0-FP4-WPP20G-WALTER Designation: RCMT1204M0-FP4 WPP20G Manufacturer: Walter Tools Core data Relief angle: 7° Insert size: 12 Thickness: 04 Tolerance class: M Materials / Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: FP4 Form: Round Application: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The RCMT1204M0-FP4 WPP20G insert is designed primarily for steel (ISO group P); the WPP20G grade balances wear resistance and toughness for typical steel turning applications. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on the RCMT1204M0-FP4 promotes predictable chip segmentation, reducing entanglement and interruptions and supporting more consistent cycle times and surface quality. Can this insert be used for finishing operations? Yes—due to its coated-carbide substrate and balanced grade properties, the insert is suitable for many finishing tasks on steel where stable cutting and good surface integrity are required. What are the dimensional and tolerance details to consider for toolholders? Key dimensions include the 12 size, round form and thickness 04; tolerance class M indicates standard geometric control for interchangeability with compatible toolholders. Is the insert a coated or uncoated grade? The product is a coated carbide insert from the Tiger·tec Gold series, identified by the WPP20G grade for enhanced wear resistance and tool life. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCMT1204M0-HU6 WPP10G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating and the WPP10G grade with the HU6 chipbreaker and a 7° clearance yields a turning insert that balances wear resistance and consistent chip control for steel machining; the round RCMT form and size 12 make it a versatile choice for mixed turning operations. Order the RCMT1204M0-HU6 WPP10G insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT1204M0-HU6 WPP10G – Indexable turning insert (7° relief) by Walter Tools RCMT1204M0-HU6 WPP10G indexable insert for general steel turning, designed for stable chip formation and extended tool life in workshop and production environments Tiger‑tec Gold coated grade WPP10G Optimised HU6 chipbreaker 7° clearance for reliable cutting Round RCMT form, 12 mm inscribed circle Increased uptime through wear‑resistant grade and coating The WPP10G grade, part of the Tiger‑tec Gold series, is a coated carbide designed specifically for steel applications (ISO group P). This engineered coating enhances wear resistance and extends tool life under the typical heat and forces of turning operations. As a result, the insert reduces the frequency of tool changes and supports a steadier production flow. The combination of substrate and coating is intended to deliver predictable performance across a wide range of cutting conditions, helping to lower overall machining costs without sacrificing process reliability. Precise chip control for safer, cleaner machining Equipped with the HU6 chipbreaker, the round RCMT geometry promotes controlled chip forming and evacuation, which is crucial for both intermittent and continuous cuts. The chipbreaker geometry is tuned to fragment and direct chips away from the cutting zone, reducing the risk of entanglement and improving surface condition. With a 7° clearance angle, the insert maintains a consistent cutting engagement, which helps to protect the cutting edge and supports repeatable dimensional results—especially important when producing series parts where surface finish and tolerance stability matter. Versatile form and compatibility for efficient tooling The RCMT round form and size 12 make the insert suitable for a variety of toolholder systems that accept RCMT inserts, providing flexibility in setup and quick integration into existing tooling stocks. The thickness code 04 and tolerance class M indicate a balanced geometry for general turning tasks, from light finishing to medium roughing when paired with appropriate parameters. The insert’s specification supports straightforward process planning: select the grade WPP10G for steel workpieces, match the chipbreaker HU6 to the cut depth and feed, and benefit from consistent performance under typical shopfloor conditions. For application-specific advice on Walter Tools Tiger‑tec Gold inserts and to confirm fitment with existing toolholders, contact Metav Werkzeuge for expert guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: RCMT1204M0-HU6-WPP10G-WALTER Product type: Indexable turning insert Designation: RCMT1204M0-HU6 WPP10G Brand: Walter Tools Facts Relief angle: 7° Inscribed circle: 12 mm Thickness code: 04 Tolerance class: M Features Grade: WPP10G (Tiger‑tec Gold coated carbide) Chipbreaker: HU6 Form: R (round) Series: Tiger‑tec Gold Application material group: Steel (ISO P) Execution code: T FAQ What materials is this insert suited for? The RCMT1204M0-HU6 WPP10G insert is formulated for steel machining and corresponds to ISO P material groups; the WPP10G grade and Tiger‑tec Gold coating are optimised for typical steel heat and chip formation. Which chipbreaker should be used for medium turning operations? The HU6 chipbreaker on this RCMT insert is designed for controlled chip formation in a range of turning tasks and provides good evacuation for medium feeds and depths of cut. Is the RCMT1204M0-HU6 compatible with standard RCMT toolholders? Yes, the round RCMT form and size 12 are compatible with holders that accept RCMT inserts; verify seat geometry and clamping style to ensure correct fitment. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and edge stability, helping to extend cutting life and maintain consistent surface finish in steel turning. What tolerance and dimensional control can be expected? With tolerance class M and the defined relief angle, the insert supports repeatable cutting behaviour suitable for series production where dimensional consistency is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the stated manufacturer.
RCMT1204M0-HU6 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WPP20G coated-carbide grade and the optimised HU6 chipbreaker for consistent, high-productivity turning of Stahl components; order the RCMT1204M0-HU6 WPP20G indexable insert directly via Metav Werkzeuge or contact our consultants for machining advice. RCMT1204M0-HU6 WPP20G indexable turning insert – Walter Tools, Tiger·tec Gold coating, 7° clearance The RCMT1204M0-HU6 WPP20G is an indexable turning insert engineered for productive Stahl turning, offering a HU6 chipbreaker and a 7° clearance for stable cutting and reliable chip control in continuous production environments. Tiger·tec Gold coated carbide grade WPP20G Optimised HU6 chipbreaker for Stahl machining 7° clearance for secure edge engagement Round RCMT geometry for versatile turning High wear resistance that extends tool life and uptime The combination of the Tiger·tec Gold coating and the WPP20G grade results in a coating system optimised for the thermal and mechanical demands of machining Stahl. The coated hardmetal substrate reduces flank and crater wear under typical turning conditions, while the HU6 chipbreaker promotes consistent chip formation and evacuation. This translates into longer intervals between indexings, fewer unexpected machine stops and a lower cost per component in medium- to high-volume production. The round RCMT form factor supports stable cutting forces and repeatable engagement in cyclic and continuous turning operations. Consistent surface finish and process reliability for series production The insert’s 7° clearance and the M tolerance class combine to deliver predictable tool behaviour at the cutting edge. The geometry and coating are selected to maintain a stable cutting edge and to provide surface quality targets with reduced rework. For workshops aiming at repeatable results, the insert offers a balance of toughness and wear resistance that suits both roughing passes and finishing cuts when process parameters are adjusted accordingly. Walter Tools’ proven grade selection underlines process security and supports constant part-to-part quality in batch runs. Practical integration and machining economy on the shop floor The RCMT1204M0-HU6 WPP20G insert fits commonly used round-seat toolholders and is suitable for straightforward tool change routines. The coated carbide composition and optimised chipbreaker lower the need for frequent tool changes, improving overall machine utilisation. For operations targeting productivity gains, the insert reduces downtime related to tooling and simplifies inventory by covering a broad range of Stahl applications according to ISO P recommendations. For parameter recommendations and to align the insert with specific turning strategies, technical consultation is available through Metav Werkzeuge. For reliable, high-productivity Stahl turning with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for tailored process advice or to secure the RCMT1204M0-HU6 WPP20G insert Technical data Article number: RCMT1204M0-HU6-WPP20G-WALTER Product: RCMT1204M0-HU6 WPP20G indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Dimensions & core data Plate size: 12 Plate thickness: 04 Free angle: 7° Tolerance class: M Designation: RCMT1204M0-HU6 WPP20G Special features Plate form: Round Chipbreaker: HU6 Material group suitability: P (Stahl) Substrate: Coated carbide Execution code: T FAQ What materials is this insert intended for? The RCMT1204M0-HU6 WPP20G insert is designed primarily for Stahl (ISO P group), providing optimised wear control and chip formation for unalloyed and alloyed steels. Which chipbreaker is fitted and what advantage does it offer? The HU6 chipbreaker promotes controlled chip segmentation and evacuation during turning, improving surface finish and reducing the risk of built-up edge in Stahl machining. Is the insert suitable for finishing operations? Yes. With appropriate parameter selection the coated WPP20G grade provides a combination of toughness and wear resistance that can be used for both finishing and mixed roughing/finishing strategies. How does the 7° clearance influence cutting behaviour? The 7° clearance supports secure edge engagement and helps to reduce rubbing behind the cutting edge, contributing to consistent tool life and predictable cutting forces. Which toolholders are compatible with the RCMT geometry? Round-seat toolholders that accept RCMT-form inserts are compatible; the round form factor is widely used for versatile external turning applications. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com