ROHX10T3M0-D67 WSM35G X Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold surface technology, reliable edge stability for machining rostfreier Stahl and superalloys, and the compact round form factor for consistent chip control; order inserts directly via Metav Werkzeuge or consult the experts for application-specific advice. ROHX10T3M0-D67 WSM35G — Walter Tools milling indexable insert with Tiger·tec Gold coating and D67 chipbreaker ROHX10T3M0-D67 WSM35G is a round milling insert engineered for demanding milling operations on rostfreier Stahl and heat‑resistant superalloys, designed to deliver stable cutting performance in high‑temperature, adhesive conditions Tiger·tec Gold coating for long tool life Suited to rostfreier Stahl and heat‑resistant alloys Round 10 mm insert, thickness T3, chipbreaker D67 High cutting‑edge stability for heavy milling Consistent performance on difficult‑to‑cut materials The insert combines the WSM35G grade with Tiger·tec Gold surface technology to address the thermal and mechanical challenges of machining rostfreier Stahl and S‑class superalloys. The coated cemented‑carbide composition promotes secure chip formation and reduces edge build‑up, which is crucial where high temperatures and material toughness tend to shorten tool life. By selecting a cutting grade tailored for poor thermal conductivity and adhesive tendencies, the cutting process achieves greater repeatability and fewer interruptions for regrinding or edge changes. Reliable chip control and predictable edge life A dedicated chipbreaker D67 paired with the round 10 mm plate geometry and T3 thickness provides controlled chip formation across varying depths of cut. The chipbreaker design channels chips away from the cutting zone, reducing the risk of re‑cutting and minimising heat concentration at the edge. This geometry supports a consistent surface finish and stabilises cutting forces, translating into longer intervals between indexings and a lower overall cost per component when milling complex contours or interrupted cuts. Designed for productivity and process security The circular insert form and robust grade deliver high mechanical stability in heavy milling tasks, increasing material removal rates while maintaining tool integrity. Built for industrial production, the component contributes to reduced setup variability and higher machine throughput; the result is improved cycle time reliability and fewer quality deviations. Compatibility with standard toolholders and a clear tolerance class H support straightforward integration into existing tool systems, helping to standardise machining processes and protect component quality under demanding conditions. Contact Metav Werkzeuge for tailored machining recommendations and to discuss the best Walter Tools ROHX10T3M0-D67 WSM35G insert configuration for a specific application — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical Data Article number: ROHX10T3M0-D67-WSM35G-WALTER Designation: ROHX10T3M0-D67 WSM35G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Core measurements Diameter: 10 mm Thickness: T3 Tolerance class: H Chipbreaker: D67 Special features Coating: Tiger·tec Gold Carbide grade: WSM35G (coated cemented carbide) Shape: Round insert Applicability: rostfreier Stahl and heat‑resistant superalloys (S / M) Execution: X Stable cutting edge for heavy‑duty milling FAQ Which materials are best machined with this insert? The ROHX10T3M0-D67 WSM35G insert is intended for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), where the WSM35G grade and Tiger·tec Gold coating support secure chip formation and heat resistance. What is the function of the D67 chipbreaker? Chipbreaker D67 controls the chip shape and evacuation, reducing re‑cutting and heat concentration at the cutting edge; this improves surface finish and extends the service interval of the insert. What are the physical dimensions and fit details? The insert has a 10 mm diameter, T3 thickness and a round form factor with tolerance class H; refer to SKU ROHX10T3M0-D67-WSM35G-WALTER for ordering and toolholder compatibility. Does the coating improve edge life on high‑temperature alloys? Yes. The Tiger·tec Gold coating on the WSM35G grade increases thermal and wear resistance, enhancing edge stability during machining of superalloys and adhesive stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are used for clarification only. The offered item is an original, brand‑new product from the manufacturer.
ROHX10T3M0-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, versatile material capability and the Tiger·tec Gold coating for reliable, repeatable milling performance — order through Metav Werkzeuge or consult the team for tailored recommendations. ROHX10T3M0-D67 WSP45G milling insert, Tiger·tec Gold (round Ø10) — Walter Tools ROHX10T3M0-D67 WSP45G is a round milling insert designed for general and demanding milling operations, offering a PVD-coated carbide grade optimised for Steel, rostfreier Stahl and high-temperature alloys. Tiger·tec Gold PVD coating for long tool life Suitable for Stahl, rostfreier Stahl and superalloys Round insert Ø10 with T3 geometry D67 chipbreaker for stable chip control Consistent productivity through advanced coating and grade The Tiger·tec Gold coating and the WSP45G grade combine to deliver consistent cutting-edge stability and prolonged tool life. Designed as a PVD-coated carbide option, this insert supports steady material removal rates and reduced wear even when heat generation is high. The choice of coating technology aims to reduce flank wear and maintain dimensional stability across serial production, which in turn supports predictable machining cycles and lower tool-change frequency. Reliable chip control and form-stability for milling The D67 chipbreaker geometry provides controlled chip formation for many common milling strategies. The integrated chip control reduces the risk of built-up edge and improves surface integrity, particularly when machining tougher materials. With a round shape and the T3 profile, the insert enables flexible engagement angles and predictable radial runout behaviour, which benefits both face and contour milling operations. Broad material compatibility for process flexibility This insert is specified for application groups P/M/S — that is, for unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys including titanium. The grade’s toughness and thermal stability help to handle the typical challenges posed by these materials: variable chip formation, adhesion tendency and high cutting temperatures. Selecting a single grade that covers multiple ISO groups reduces inventory complexity while retaining reliable performance across diverse workpieces. Practical benefits for workshop integration The compact Ø10 format and T3 thickness make the insert suitable for smaller milling cutters and applications requiring close tool spacing. The standardized ISO designation ensures interchangeability and ease of tool planning. As a result, set-up times are shortened and tool selection becomes more straightforward, helping to improve overall shop-floor throughput without sacrificing part quality. Contact Metav Werkzeuge for expert advice on integrating the Walter Tools ROHX10T3M0-D67 WSP45G into existing toolsets and to check current availability Technical data Article number / SKU: ROHX10T3M0-D67-WSP45G-WALTER Label: Fräswendeschneidplatte ROHX10T3M0-D67 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling insert) Series: Tiger-tec Gold Grade / Sort: WSP45G Shape: Rund Size: 10 Thickness: T3 Chipbreaker: D67 Execution: X Tolerance class: H Material applicability: P / M / S Facts Size value: 10 Thickness code: T3 Tolerance class: H Special features PVD-coated carbide grade (Tiger·tec Gold) Broad ISO material coverage P / M / S Designed for stable chip formation and long life Round insert geometry for flexible milling applications D67 chipbreaker for controlled chips FAQ What materials can this insert machine effectively? The ROHX10T3M0-D67 WSP45G insert from Walter Tools is specified for ISO groups P, M and S — suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including titanium. Is the coating suitable for high-temperature applications? Yes, the Tiger·tec Gold coating used on the WSP45G grade is engineered for thermal stability and good wear resistance during elevated cutting temperatures typical of finishing and roughing in demanding alloys. Which chipbreaker is fitted and what advantage does it offer? The insert features the D67 chipbreaker, which provides predictable chip control and reduced tendency for built-up edge, improving surface quality and machine uptime in varied milling operations. Can this insert be used for finishing and roughing operations? The toughness of the WSP45G grade and the Tiger·tec Gold coating balance wear resistance and edge stability, making the insert suitable for a range of cutting conditions from soft finishing to more aggressive roughing strategies. How does the round geometry influence application choice? The round form offers flexibility in radial immersion and is beneficial where varied approach angles are required; it helps distribute cutting forces and is well suited to contouring and peripheral milling tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX10T3M0-F67 W3536 W3536 Wendeplatten - Walter Tools
Take advantage of the precise round geometry, the F67 chipbreaker and the W3536 cutting grade to increase milling consistency and process reliability. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ROHX10T3M0-F67 W3536 — Milling indexable insert (round, T3, F67) — Walter Tools The ROHX10T3M0-F67 W3536 is a round milling insert designed for versatile pocketing and face milling where consistent chip control and repeatable positioning are required Round geometry for stable engagement Chip control via F67 chipbreaker Walter grade W3536 for broad applicability Tolerance class H for precise fits Delivering consistent edge performance for repeatable milling The round insert geometry provides a reliable contact area that reduces chatter and supports stable cutting forces during interrupted and continuous milling. Combined with the tolerance class H, the component offers precise seating in the toolholder which lowers run-out and contributes to consistent surface finishes. For production environments seeking reduced rework, this geometry helps maintain dimensional stability across repeated tool changes and varied machining cycles. Efficient chip management that boosts productivity The dedicated chipbreaker F67 is engineered to moderate chip shape and evacuation under typical milling conditions. Controlled chip formation reduces the risk of re-cutting and tool damage, which in turn increases process reliability and cycle-time predictability. Where high material removal rates are required, optimised chip control supports uninterrupted operation and can reduce machine downtime caused by chip accumulation. Material-grade choice tuned for flexible application The insert is specified with the W3536 cutting grade from Walter Tools, an open series grade intended for wide-ranging applications. This grade is catalog-dependent in composition but is designed to balance wear resistance with toughness for varied steels and general-purpose milling. For shops handling a mix of components, the grade choice helps deliver repeatable tool life and manageable edge wear, simplifying tool management and reorder planning. Practical handling and toolset integration With a T3 plate thickness and a size designation of 10, the insert integrates into compact cutter bodies where a lower-profile insert is preferred. The round format permits multiple index positions for extended life before disposal, while the clear designation simplifies stock-keeping. For users selecting inserts for specific holders, the clear ISO-style marking aids in ensuring the correct geometry and chipbreaker combination is mounted for the intended operation. For process-driven milling with Walter Tools' W3536 grade and F67 chip control, contact Metav Werkzeuge for tailored advice and availability. Technical Data Article number: ROHX10T3M0-F67-W3536-WALTER Product type: Milling indexable insert Manufacturer: Walter Tools Designation: ROHX10T3M0-F67 W3536 Series: Walter Schneidstoffsorte - Serie offen Facts Plate size: 10 Thickness: T3 Tolerance class: H Shape: Round Chipbreaker: F67 Special features Grade: W3536 Execution: X Material: Katalogabhängig ISO designation: ROHX10T3M0-F67 W3536 FAQ What applications suit this round insert best? The ROHX10T3M0-F67 W3536 is suitable for versatile milling tasks such as pocketing and face milling where stable engagement and good chip control are required, making it a practical choice for general workshop and production use. How does the F67 chipbreaker affect machining? The F67 chipbreaker promotes consistent chip formation and evacuation during milling, which reduces re-cutting and supports process reliability when using the W3536 grade in typical steel and mixed-material operations. Can this insert be indexed multiple times? Yes, the round shape allows for multiple index positions before disposal, extending tool life and improving cost-effectiveness in series production and varied job mixes. What does tolerance class H mean for setup? Tolerance class H indicates a tighter dimensional tolerance on the insert form, which helps ensure precise seating in the cutter body and contributes to reduced run-out and improved surface quality. Is the cutting material composition specified? The cutting material is catalog-dependent; refer to the Walter Tools product catalogue or contact Metav Werkzeuge for the exact grade composition and recommended application matrix. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
ROHX10T3M0-F67 WSM35G X Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and the WSM35G grade for stable edge life when machining stainless steel and heat‑resistant alloys; reliable chip control and a compact T3 profile support uninterrupted production. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ROHX10T3M0-F67 WSM35G milling insert — round 10 mm, Tiger·tec Gold, Walter Tools ROHX10T3M0-F67 WSM35G is a round milling insert engineered for tough-to-machine materials and high‑temperature alloys, offering a compact T3 thickness and a dedicated F67 chipbreaker for controlled swarf evacuation. Tiger·tec Gold coating for high wear resistance For stainless steel and heat‑resistant alloys Round 10 mm insert, T3 thickness, F67 chipbreaker Consistent cutting performance for demanding materials The WSM35G grade combines a coated cemented‑carbide substrate with the Tiger·tec Gold technology to deliver improved wear resistance and edge stability when machining challenging materials. Designed for the material groups S / M, the insert supports secure chip formation in both stainless steel and heat‑resistant superalloys; this reduces the incidence of built‑up edge and extends indexable‑insert life. The result is predictable tool behaviour and fewer interruptions for tool changes, which contributes directly to higher machine uptime and process reliability. Geometry and chip control that reduce rework The round shape with a nominal size of 10 mm, combined with the F67 chipbreaker and T3 thickness, offers a compact cutting geometry that stabilises the cutting edge under heavy thermal loads. The chipbreaker promotes short, manageable chips and lowers heat concentration at the cutting zone, which helps prevent surface damage and saves downstream finishing efforts. The tolerance class H and execution X ensure consistent seating and repeatable clamping, supporting automated tool‑change systems and tight process windows. Productivity gains through predictable tool life By selecting this Tiger·tec Gold insert, workshops benefit from a balance between cutting speed potential and reliable edge retention. The design focusses on efficient metal removal while limiting tool wear in extended operations, which can reduce machine downtime and spare‑part handling. For production environments processing stainless steel or superalloys, the insert offers a cost‑effective route to maintaining cycle times and surface quality while lowering the frequency of insert replacements. For specification checks, application matching or stock enquiries, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for targeted advice and availability Technical data Article number: ROHX10T3M0-F67-WSM35G-WALTER SKU: ROHX10T3M0-F67-WSM35G-WALTER Product: milling insert (Fräswendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G ISO designation: ROHX10T3M0-F67 WSM35G Specifications Diameter: 10 mm Thickness: T3 Tolerance class: H Shape: Round Features Coating: Tiger·tec Gold Chipbreaker: F67 Material groups: S / M (stainless steel; heat‑resistant superalloys and titanium) Execution: X FAQ Is this insert suitable for stainless steel machining? Yes. The ROHX10T3M0-F67 WSM35G milling insert (Walter Tools) is specified for machining stainless steel and provides stable cutting behaviour and improved resistance to built‑up edge. What does the F67 chipbreaker achieve? The F67 chipbreaker on the ROHX10T3M0-F67 promotes short, controllable chips and reduces heat concentration at the cutting zone, supporting consistent surface quality and easier chip evacuation. Can the insert handle titanium and nickel‑based alloys? The WSM35G grade is designed for the S / M material groups, so it is suitable for many heat‑resistant superalloys and titanium applications when used with appropriate cutting parameters. Which clamping and tolerance features ensure repeatability? The insert is supplied in tolerance class H with execution X, which helps ensure consistent seating and repeatable clamping performance for automated and manual tool‑change setups. How does Tiger·tec Gold improve productivity? Tiger·tec Gold coating enhances wear resistance and thermal stability, enabling longer tool life and more predictable performance in continuous production, which reduces downtime for insert changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between Metav Werkzeuge GmbH and the trademark owners. The offered article is an original, factory‑new product of the manufacturer.
ROHX10T3M0-F67 WSP45G F67 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating, versatile ISO P/M/S compatibility and the stable round T3 geometry for predictable milling performance; order the ROHX10T3M0-F67 WSP45G directly via Metav Werkzeuge or consult our specialists for application advice. ROHX10T3M0-F67 WSP45G — Milling indexable insert, Tiger·tec Gold PVD, Walter Tools The ROHX10T3M0-F67 WSP45G is a round milling indexable insert engineered for versatile machining of steel, stainless steel and heat-resistant alloys in general milling applications Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Round T3 geometry for stable cutting F67 chipbreaker for controlled chip formation Consistent productivity from a versatile PVD grade The WSP45G grade, deployed within the Tiger·tec Gold series, combines a wear-resistant PVD coating with a tough substrate to deliver a balanced performance on demanding milling tasks. This combination reduces flank wear and supports longer effective tool life, especially under cyclic thermal loads. For operations that require both surface quality and repeatable tool life, the coated grade offers a reliable compromise between durability and toughness, making it suitable for many workshop and production environments. Improved chip control and stability with round T3 geometry The round insert geometry with a T3 thickness provides high mechanical stability and positive engagement in interrupted cuts. Paired with the F67 chipbreaker, chip formation is guided to shorter, controllable segments, reducing the risk of chip entanglement and improving process security. This geometry is particularly beneficial in applications with variable depths of cut or when machining parts with thin-walled sections, where consistent chip evacuation directly supports dimensional stability. Wide material range and application-focused performance Designed for ISO groups P, M and S, the insert is suitable for unalloyed and alloyed steel, stainless steel and high-temperature superalloys and titanium variants. The grade’s toughness assists in managing built-up edge tendencies on stainless steels, while the coating helps resist adhesive wear when machining high-temperature alloys. For engineers seeking a single-insert solution across mixed production runs, the combination of grade and chipformer reduces tool change frequency and simplifies inventory management. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Gold inserts into current production and to secure fast supply from stock Technical data Article number: ROHX10T3M0-F67-WSP45G-WALTER Label: Fräswendeschneidplatte ROHX10T3M0-F67 WSP45G Walter Tools Manufacturer: Walter Tools Facts Diameter: 10 mm Thickness: T3 Chipbreaker: F67 Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSP45G (coated carbide) Geometry: round insert Material compatibility: P / M / S (steel, stainless steel, superalloys) Application: milling indexable insert FAQ What materials can this insert machine effectively? The ROHX10T3M0-F67 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat-resistant superalloys. How does the Tiger·tec Gold coating help in milling? The Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and supports stable cutting edges, which enhances tool life and process reliability in milling tasks. When is the round T3 geometry advantageous? Round T3 geometry provides mechanical strength and reliable engagement in interrupted cuts; it is particularly useful where stability and reduced edge chipping are priorities. What chip behaviour can be expected with the F67 chipbreaker? The F67 chipbreaker promotes compact, controllable chips, improving evacuation and reducing the risk of chip-related surface defects during milling. Is this insert suitable for mixed-production environments? Yes, the combination of the WSP45G grade, Tiger·tec Gold coating and F67 chipformer makes this insert a practical option for varied production runs that include steel, stainless steel and high-temperature alloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
ROHX10T3M08-A57 WHH15X Wendeplatten - Walter Tools
Benefit from a combination of cost-efficiency, stable chip formation and consistent tool life thanks to the WHH15X grade and A57 chipbreaker. Order the ROHX10T3M08-A57 WHH15X directly via Metav Werkzeuge or ask our consultants if needed. ROHX10T3M08-A57 WHH15X – Milling indexable insert, round T3 Ø10 mm (Walter Tools) A ROHX10T3M08-A57 WHH15X milling indexable insert for general milling applications, featuring a round form, A57 chipbreaker and a robust T3 thickness for stable cutting. *Round insert, Ø 10 mm, stable seating *T3 thickness for robust cutting edge *WHH15X coated carbide grade *A57 chipbreaker for reliable chip control High-performance cutting with the WHH15X grade The WHH15X grade is a coated carbide option developed to provide a balance between economy and tool life. The round indexable insert geometry and A57 chipbreaker combine to reduce cutting forces and promote controlled chip evacuation, which supports continuous machining and lowers the risk of tool chatter. The Ø10 mm diameter and T3 thickness contribute to a secure clamping interface and predictable ring stiffness, enabling producers to maintain cycle times and surface quality across a broad range of operations. Precise chip control and consistent surface quality The insert’s A57 chipbreaker is engineered to fragment chips reliably at typical feed rates for general milling; this leads to improved surface finishes and fewer interruptions for chip management. The tolerance class H and the execution marked as X support repeatable positioning in modular toolholders, ensuring consistent results in serial production. Where material suitability is critical, the tool’s operating window and the coated carbide construction should be matched to the workpiece by consulting the product matrix for optimal parameters. Practical compatibility and application guidance The round plate format and modest diameter make this insert suitable for pocket milling, trochoidal passes and light profiling where compact insert geometry is required. The designation ROHX10T3M08-A57 indicates the basic shape and chipbreaker; the complete identification includes the WHH15X grade for clear tool management. Because material compatibility varies by matrix, the tool is best applied where moderate to high productivity is required and where the machining strategy benefits from controlled chips and robust edge preparation. For integration into existing tool systems, ensure compatible clamping and holder geometry to preserve the insert’s registration and cutting line. Request application advice or stock information from Metav Werkzeuge for Walter Tools WHH15X inserts to secure the right configuration for the intended machining tasks Technical Data Article number: ROHX10T3M08-A57-WHH15X-WALTER SKU: ROHX10T3M08-A57-WHH15X-WALTER Designation: ROHX10T3M08-A57 WHH15X Numbers / Core technical data Diameter: 10 mm Thickness: T3 Tolerance class: H Plate form: round Designs / Special features Grade: WHH15X (coated carbide) Chipbreaker: A57 Execution: X Series: Walter Schneidstoffsorte - Serie offen Material: catalogue-dependent FAQ What materials is this insert suitable for? Material suitability must be checked against the specific product matrix; the WHH15X grade of the ROHX10T3M08-A57 WHH15X milling indexable insert (Walter Tools, SKU ROHX10T3M08-A57-WHH15X-WALTER) is a coated carbide option intended for broad application ranges, but the exact workpiece categories depend on the matrix. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes controlled chip formation and evacuation, helping to maintain surface finish and reduce interruptions for chip clearing when using the ROHX10T3M08-A57 WHH15X in continuous milling operations. Is this insert compatible with standard round-holder systems? The round plate geometry and execution X support use in holders designed for round inserts; correct clamping and seating are required to realise the T3 thickness stability and the tolerance class H repeatability. What is the main benefit of the WHH15X coating? The coating on the WHH15X grade improves tool life and wear resistance compared with uncoated carbide, offering a cost-effective balance between performance and longevity under many production conditions. Where can further technical data be obtained? Detailed cutting data, recommended feeds and speeds, and the full material matrix can be provided by Metav Werkzeuge or found in the manufacturer’s documentation for the Walter Tools range. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany. The Walter AG (brand: Walter Tools) is part of the Sandvik group and a leading manufacturer of precision tools for metalworking. Protected trademarks and product names remain the property of their respective owners. The mentioned brand is cited for clarification and does not imply any commercial association with Metav Werkzeuge.
ROHX10T3M08-A57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, targeted chip control for cast iron and the proven Tiger·tec Gold coating to maintain stable machining and longer tool life; order the insert directly via Metav Werkzeuge or ask our consultants for process recommendations. ROHX10T3M08-A57 WKK25G — Fräswendeschneidplatte (round), Tiger·tec Gold — Walter Tools ROHX10T3M08-A57 WKK25G is a round milling indexable insert designed for efficient machining of cast iron components, offering robust chip control and a durable coated-carbide grade for productive metal removal Tiger·tec Gold coating for longer life Grade WKK25G optimised for cast iron Round insert form for versatile milling Chipbreaker A57 for consistent chip formation Consistent results when milling cast iron The combination of the Tiger·tec Gold coating and the WKK25G carbide grade ensures reliable performance when working with cast iron. The coating reduces abrasive wear and supports higher cutting intervals, while the A57 chipbreaker is engineered to produce short, easily controlled chips that reduce vibration and improve surface finish. For production environments where repeatability matters, this indexable insert offers measurable gains in process stability and reduced rework. The round geometry contributes to smoother entry and exit behaviour in interrupted cuts, which is particularly advantageous on complex cast-iron components. Lower tooling cost through extended tool life A focus on wear resistance and optimized chip control translates directly into lower tooling cost per part. The insert’s layered coating technology and the WKK25G composition slow flank and crater wear, extending the usable life of each cutting edge. In practice, this means fewer indexings and tool changes, less downtime and a steadier production rhythm. Explaining terminology: the chipbreaker shapes breakable chips to avoid long swarf; the Tiger·tec Gold coating is a multi-layer PVD/CVD-type technology that protects the carbide substrate under abrasive conditions typical for grey and nodular cast irons. Integration into standard milling processes The insert is supplied in a familiar round format and a T3 thickness, allowing straightforward integration into common milling cutter bodies designed for round inserts. Its size 10 specification supports compact cutter designs where rigidity and stability are required. Where feed and speed optimisation is needed, the insert’s chip control features allow slightly more aggressive feed per tooth while maintaining surface integrity, helping to reduce cycle times. Selection guidance: prefer this grade for components dominated by cast-iron alloys; if machining other materials, confirm material suitability before use. Contact Metav Werkzeuge for tailored recommendations on Walter Tools' ROHX10T3M08-A57 WKK25G inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability, delivery and cutting-parameter advice. Technical Data Article number: ROHX10T3M08-A57-WKK25G-WALTER Product designation: ROHX10T3M08-A57 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Diameter: 10 mm Thickness: T3 Tolerance class: H Shape: Round Special features Carbide grade: WKK25G Chipbreaker: A57 Coating: Tiger·tec Gold Execution: X Suitable material group: K (cast iron) FAQ What materials is this insert intended for? The insert is optimised for cast iron applications; the Walter Tools ROHX10T3M08-A57 WKK25G grade is specifically tuned to handle the abrasive wear and short, brittle chips typical of cast-iron machining. What is the chip control behaviour of the A57 breaker? The A57 chipbreaker produces short, controlled chips to reduce swarf entanglement and vibration, improving surface finish and process reliability when milling cast iron. Can this insert be used in interrupted cuts? Yes — the round geometry and robust grade provide stable performance in interrupted milling; however, cutter stiffness and fixture rigidity should be ensured for best results. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold decreases abrasive wear and supports longer edge life under the thermal and mechanical stresses common in cast-iron cutting, enabling longer production runs and fewer tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of the global precision-tool landscape. The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands beyond the sale of original, brand-new products from the manufacturer.
ROHX10T3M08-A57 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade WKP35G and the proven A57 chipbreaker to secure stable chip formation and consistent surface quality in steel and cast-iron milling; reliable round geometry and tolerance class H support repeatable indexing and process security. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. ROHX10T3M08-A57 WKP35G milling indexable insert — round, T3 — Walter Tools The ROHX10T3M08-A57 WKP35G is a round milling indexable insert in the Tiger·tec Gold series, engineered for productive machining of steel and cast iron with robust chip control and long tool life. Tiger·tec Gold coated grade WKP35G Suitable for steel (P) and cast iron (K) Round insert, thickness T3 Chipbreaker A57 for stable chips Boosted productivity and extended edge life with Tiger·tec Gold The coated carbide grade WKP35G, part of the Tiger·tec Gold series, combines a modern multi-layer coating with a wear-resistant substrate to reduce flank and crater wear under typical milling temperatures. This results in longer edge life and fewer indexings per toolholder, which in turn lowers downtime and tool inventory requirements. The coating reduces friction at the contact zone, enabling higher cutting parameters where the machine and workpiece allow, so productivity gains are measurable without compromising component accuracy. Consistent chip formation and improved process stability The A57 chipbreaker is designed for reliable chip control when machining steels and cast irons (ISO groups P and K). By shaping the chip flow and promoting short, controlled breakage, the breaker reduces the risk of entanglement and improves coolant access to the cutting zone. For mixed production runs that include both unalloyed and alloyed steels as well as grey or nodular cast iron, this combination supports stable machining and predictable surface finish, reducing rework and enabling consistent cycle times. Round geometry and tolerance class H for repeatable positioning A round insert geometry offers flexibility in approach angles and can be indexed multiple times, delivering even wear across the cutting edge. The T3 thickness and tolerance class H ensure secure seating in compliant toolholders and consistent runout characteristics, which are essential for high-quality milled surfaces. Where tool-change frequency and mounting repeatability are critical, this configuration helps to maintain component tolerances and reduces variability between batches. Practical integration and material coverage for mixed shop floors The grade WKP35G is tuned for a broad range of materials within the P (steel) and K (cast iron) classifications, making it a practical choice for job shops and production lines that require a single insert solution across different workpieces. The combination of coated carbide, the A57 chipbreaker and round format simplifies tooling logistics and supports a predictable machining process, enabling easier parameter transfer between machines and operators. For mills aiming to balance tool life, surface quality and process security, this insert provides a convincing cost-to-performance ratio. For procurement or process advice on Walter Tools' ROHX10T3M08-A57 WKP35G insert, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — to discuss holder compatibility and parameter recommendations. Technical Data Article number: ROHX10T3M08-A57-WKP35G-WALTER Designation: ROHX10T3M08-A57 WKP35G Manufacturer: Walter Tools Core data Shape/format: Round Size: 10 Thickness: T3 Tolerance class: H Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: A57 Material application: steel (P), cast iron (K) Form: Round FAQ What materials is this insert suited for? The ROHX10T3M08-A57 WKP35G is designed for machining steel (P) and cast iron (K) according to ISO classification; the WKP35G grade provides wear resistance across these groups. What advantage does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating on the WKP35G grade reduces friction and improves thermal stability at the cutting edge, resulting in longer tool life and the possibility to raise cutting parameters where appropriate. How does the A57 chipbreaker affect machining performance? The A57 chipbreaker promotes short, controlled chips and consistent chip evacuation, which improves process stability and reduces the chance of chip-related interruptions in milling operations. Is the round format suitable for heavy roughing? The round geometry of this insert allows multiple effective indexes and uniform wear distribution; while it can be used for robust operations, suitability for specific heavy-roughing tasks depends on the chosen holder and cutting parameters. What does tolerance class H mean for mounting and accuracy? Tolerance class H indicates tighter geometric tolerances for the insert, aiding repeatable seating and consistent runout, which supports tighter surface finish and dimensional control in production. Protected trademarks and trade names remain the property of their owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand-new product of the manufacturer. Manufacturer: Walter Tools; part of Walter AG, headquarters Tübingen, Germany.
ROHX1204M0-D57 W3536 W3536 Wendeplatten - Walter Tools
Take advantage of the combination of precise D57 chip control, robust W3536 grade and consistent tolerances for uninterrupted milling performance; order directly via Metav Werkzeuge or contact our advisors for cutting data and availability. ROHX1204M0-D57 W3536 indexable milling insert — Walter Tools (round form, D57 chipbreaker) The ROHX1204M0-D57 W3536 is a round indexable milling insert developed for general milling operations where controlled chip formation and repeatable geometry are required Round insert, size code 12 D57 chipbreaker for consistent chip control Walter W3536 grade for broad application range Maximise uptime with controlled chip evacuation The combination of a purpose-designed D57 chipbreaker and the round geometry delivers predictable chip formation that reduces recutting and the risk of tool or workpiece damage. Reliable chip control contributes directly to higher process stability and fewer unplanned stops; this increases throughput and lowers unit costs in repetitive production. Where indexable tooling is used across shifts, consistent chips translate into reduced machine cleaning intervals and steadier cycle times, supporting an efficient production rhythm. Versatile grade that supports a wide range of tasks The W3536 grade provides a balanced mix of edge strength and wear resistance tailored for many machining situations; material suitability should be verified against the product matrix to match the cutting data to the workpiece. With a clear tolerance class H, the insert supports repeatable seating in toolholders and predictable dimensional behaviour under load. Operators and process planners gain confidence from the known tolerance behaviour, which helps to reduce scrap and rework in batch production. Practical form and codes for straightforward integration The round insert form simplifies engagement in interrupted cuts and enables flexible cutter geometries. Design codes such as size code 12, thickness code 04 and the ISO designation ROHX1204M0-D57 W3536 make procurement and tool management straightforward; cataloguing by these identifiers reduces setup errors and speeds up inventory handling. The insert's execution code X and series information clarify the manufacturing family and assist in finding compatible holders or replacements quickly. Contact Metav Werkzeuge for detailed cutting data, availability and tailored application advice for Walter Tools inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ROHX1204M0-D57-W3536-WALTER Label: Fräswendeschneidplatte ROHX1204M0-D57 W3536 Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Key figures Size code: 12 Thickness code: 04 Chipbreaker: D57 Tolerance class: H Execution: X Special features Grade: W3536 Form: Round Series: Walter Schneidstoffsorte - Serie offen ISO designation: ROHX1204M0-D57 W3536 SKU: ROHX1204M0-D57-W3536-WALTER FAQ What materials is this insert suitable for? The ROHX1204M0-D57 W3536 is offered in the Walter W3536 grade; material compatibility depends on the specific product matrix and should be checked against the manufacturer's cutting recommendations. How does the D57 chipbreaker affect machining? A D57 chipbreaker promotes controlled chip formation and evacuation which improves process stability, reduces recutting and helps maintain consistent surface quality during milling. Can the insert be used in interrupted cutting? The round form and the insert design are suitable for interrupted cuts; the geometry supports entry and exit cycles while the chipbreaker aids in preventing clogging. How are replacements identified for tool management? Use the ISO designation ROHX1204M0-D57 W3536, the SKU and the size/thickness codes to locate matching inserts and compatible holders quickly Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
ROHX1204M0-D57 WKP35G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating and WKP35G grade for extended tool life and consistent chip control; the round geometry with D57 chipbreaker supports stable milling in steel and cast iron. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. ROHX1204M0-D57 WKP35G Indexable Milling Insert, Tiger‑tec Gold – Walter Tools The ROHX1204M0-D57 WKP35G is a round indexable milling insert engineered for productive machining of steel and cast iron in industrial milling applications. High wear resistance Tiger‑tec Gold grade WKP35G Round geometry for stable interrupted cuts Optimised D57 chipbreaker for controlled chips Suitable for steel (P) and cast iron (K) Consistent machining performance through advanced grade and coating The combination of the WKP35G cutting grade and the Tiger‑tec Gold coating provides a balance of wear resistance and toughness that favours long tool life and repeatable results in production environments. The grade is a coated carbide designed for the thermal and abrasive loads typical when machining steel and cast iron; this means fewer insert changes and reduced machine downtime. The coated surface enhances resistance to flank wear and supports stable cutting parameters, which translates into predictable tool behaviour and consistent part quality. Round insert geometry delivers robustness in interrupted and heavy milling A round insert form with the D57 chipbreaker gives mechanical strength at the cutting edge and even load distribution across the insert radius. This geometry is especially advantageous for interrupted cuts and roughing cycles, where edge stability reduces the risk of chipping. The specified size 12 and thickness 04 ensure a robust contact area and allow for secure clamping in standard toolholders, supporting higher metal removal rates while maintaining tool integrity during demanding operations. Chip control and process security for reliable production The D57 chipbreaker is engineered to form short, controllable chips when cutting into P and K materials, which improves evacuation and reduces recutting. Better chip control directly contributes to surface finish consistency and less wear on downstream components such as conveyors and filters. The insert’s tolerance class H and execution X support precise seating and repeatable indexability, enabling reliable changeovers and efficient scheduling in series production. Practical benefits for workshop and production planning Choosing this insert reduces unpredictability in tool life and process performance, supporting leaner tool inventories and fewer emergency interventions. The insert’s suitability for both steel and cast iron widens its application range, allowing a single grade to be used across multiple workpiece families. For operations aiming to increase throughput while maintaining surface quality, the combination of grade, coating and geometry offers a pragmatic route to improved efficiency and lower overall machining cost per part. Contact Metav Werkzeuge for tailored application support and to discuss how the Tiger‑tec Gold WKP35G inserts can be integrated into existing machining processes; Metav Werkzeuge provides direct sales and technical consultancy to optimise results. Technical Data Article number: ROHX1204M0-D57-WKP35G-WALTER Designation: ROHX1204M0-D57 WKP35G Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger‑tec Gold Grade: WKP35G Facts Form: Round Chipbreaker: D57 Size: 12 Thickness: 04 Tolerance class: H Execution: X Special features Material suitability: Steel (P), Cast iron (K) Coated carbide technology (Tiger·tec Gold) Optimised chip control for interrupted cuts Robust geometry for high metal removal FAQ Is the insert suitable for roughing in steel? The ROHX1204M0-D57 WKP35G insert from Walter Tools is designed for machining steel (ISO group P) and its WKP35G grade and round geometry make it well suited to roughing operations that require stable edges and reliable chip control. Can this insert be used for cast iron components? Yes. The insert is suitable for cast iron (ISO group K); the D57 chipbreaker and coated carbide grade are tuned to handle the abrasive wear and fragmenting chips typical of cast materials. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating improves wear resistance and thermal stability, which helps to extend insert life and maintain consistent cutting performance across batches, reducing downtime for insert changes. What does the tolerance class H indicate for this insert? Tolerance class H relates to dimensional precision of the insert, supporting accurate seating in the toolholder and repeatable indexability for predictable machining cycles. Are there special considerations for tooling holders with round inserts? Round inserts like this one offer strong edge stability and flexible indexing; ensure the holder is specified for the size 12 round format and that clamping force is appropriate for the thickness 04 insert to secure correct seating and heat transfer Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names mentioned are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the named brands; the offered item is an original, factory‑new product of the manufacturer.
ROHX1204M0-D57 WKP35S W KP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for robust wear resistance and consistent chip formation; the round format and D57 chipbreaker deliver versatile, predictable milling results for steel and cast iron. Order the insert via Metav Werkzeuge or consult the technical team for customised cutting data. ROHX1204M0-D57 WKP35S indexable milling insert — Tiger·tec Silver, for steel & cast iron by Walter Tools The ROHX1204M0-D57 WKP35S is a round, coated indexable milling insert designed for productive machining of steels and cast iron in industrial milling applications. Tiger·tec Silver coated solid performance Optimised for steel and cast iron machining Round 12 format for versatile milling Stable chip control with D57 chipbreaker Maximise cutting performance with coated-carbide technology The combination of the WKP35S grade and the Tiger·tec Silver coating provides a balance of toughness and wear resistance suited to demanding production environments. The coated-carbide construction reduces flank and crater wear, enabling extended tool life under typical heats generated when machining ISO P (steel) materials. The insert’s engineered coating also helps maintain a stable cutting edge, which translates into reliable cycle times and fewer tool changes on the shop floor. Predictable chip formation and surface quality The D57 chipbreaker is developed for consistent chip control when machining both steels and cast iron, reducing the risk of long, entangling chips and improving evacuation in medium-to-heavy milling operations. The round insert geometry increases edge strength and allows flexible cutting directions, making the component suitable for interrupted cuts and roughing operations where robustness and predictable chip flow are essential for process stability. Application-focused benefits and process security Specified for the machining of steel (P) and cast iron (K) according to ISO 513 groupings, this indexable insert supports productive, repeatable results in series production and job-shop environments. The tolerance class H and the compact plate dimensions (format 12, thickness 04) enable accurate seating in standard toolholders and consistent mounting position, which aids reproducible surface finish and tool life. The combination of geometry and grade contributes to efficient material removal rates and low risk of premature edge failure. For reliable high-performance milling with Walter Tools' Tiger·tec Silver technology, contact Metav Werkzeuge for tailored cutting data and availability via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: ROHX1204M0-D57-WKP35S-WALTER Name: Fräswendeschneidplatte ROHX1204M0-D57 WKP35S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S ISO designation: ROHX1204M0-D57 WKP35S Facts Plate size: 12 Plate thickness: 04 Tolerance class: H Plate form: Round Chipbreaker: D57 Special features Coated carbide grade WKP35S Suitable for steel (P) and cast iron (K) Robust round geometry for versatile milling Engineered for stable chip control and wear resistance FAQ What materials is this insert best suited for? The ROHX1204M0-D57 WKP35S insert is intended for machining steel (ISO P) and cast iron (ISO K), matching the WKP35S grade and Tiger·tec Silver coating to those material groups. What does the WKP35S grade indicate? WKP35S denotes a coated carbide grade optimised for a balance of wear resistance and toughness; it is part of Walter Tools' Tiger·tec Silver technology for productive machining. How does the D57 chipbreaker affect machining? The D57 chipbreaker provides predictable chip formation and improved evacuation in milling operations, reducing chip-related interruptions and supporting consistent surface finish. Is the round plate geometry advantageous for interrupted cuts? Yes; the round format increases edge strength and allows flexible engagement angles, making it suitable for interrupted cutting and heavy-duty milling. Manufacturer/Responsible: Walter AG; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX1204M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Combine the Tiger‑tec Gold coating and the WPP35G grade for reliable steel machining and consistent chip formation; benefit from the round geometry and D57 chipbreaker for versatile milling applications. Order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. ROHX1204M0-D57 WPP35G Fräswendeschneidplatte (round) — Tiger‑tec Gold, Walter Tools The ROHX1204M0-D57 WPP35G is a round milling insert developed for efficient machining of steel, featuring the Tiger‑tec Gold coating and a D57 chipbreaker for controlled chip formation. Tiger‑tec Gold coating for wear resistance WPP35G grade optimised for steel machining Round 12 geometry for versatile engagement Consistent performance through advanced coating technology The Tiger‑tec Gold coating and the WPP35G grade combine to form a coated carbide solution tailored for steel machining. This coating technology is engineered to improve wear behaviour under the thermal and mechanical loads typical of steel cutting. As a consequence, the insert delivers longer tool life and reduced downtime, which lowers the cost per part and supports steady production rates. The description of the grade indicates a balance between wear resistance and toughness suitable for the machining characteristics of unalloyed and alloyed steel. Controlled chip formation and stable cutting behaviour The round insert geometry together with the D57 chipbreaker promotes dependable chip control during milling operations. The radial shape provides multiple effective cutting edges and allows flexible engagement angles, which helps to maintain process stability across varied cutting conditions. Good chip control reduces the risk of re-cutting, improves surface integrity and supports safer chip handling in automated or manual setups. This configuration is particularly useful where repeatable chip evacuation and consistent cutting forces are required. Precise specification for industrial compatibility Manufactured with a thickness designation of 04 and a nominal size of 12, the insert conforms to industry-recognised dimensions and a tolerance class H, aiding easy interchangeability in existing tool holders. The product is identified as a round milling insert for steel applications under the Tiger‑tec Gold series and uses a coated carbide substrate optimised for the thermal and mechanical demands of turning and milling steel. These specifications simplify tool selection for engineers seeking a balance of robustness and economical performance. For application advice on Walter Tools Tiger‑tec Gold inserts or to source the ROHX1204M0-D57 WPP35G through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ROHX1204M0-D57-WPP35G-WALTER Item: Fräswendeschneidplatte ROHX1204M0-D57 WPP35G Walter Tools Manufacturer: Walter Tools Numbers / Core technical data Size: 12 Thickness: 04 Chipbreaker: D57 Tolerance class: H Designs / Special features Series: Tiger‑tec Gold Grade: WPP35G Geometry: Round (Rund) Application group: P (steel) Substrate: coated carbide FAQ What materials is this insert designed to machine? The ROHX1204M0-D57 WPP35G is specified for steel machining (material group P), designed to handle the heat and chip formation typical of unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the WPP35G grade enhances wear resistance and thermal stability, which extends tool life and contributes to more consistent production output with the Walter Tools insert. What advantages does the round geometry offer? The round geometry allows multiple cutting edges and flexible engagement, making the insert versatile for a range of milling strategies while supporting steady chip formation with the D57 breaker. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer.
ROHX1204M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Achieve reliable machining of stainless steels and heat‑resistant superalloys through the combination of the WSM35G coated‑carbide grade and Tiger·tec Gold technology; the round 12‑form insert with D57 chipbreaker delivers consistent chip control and a stable cutting edge. Order the insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. ROHX1204M0-D57 WSM35G Fräswendeschneidplatte – Walter Tools, Tiger·tec Gold, round 12 form with D57 chipbreaker ROHX1204M0-D57 WSM35G is a round milling indexable insert designed for high‑duty machining of stainless steels and heat‑resistant alloys, delivering reproducible cutting performance in demanding production environments. Tiger·tec Gold coated carbide technology WSM35G coated carbide grade Round 12 form for versatile pockets D57 chipbreaker for controlled chips Higher throughput on hard‑to‑machine materials The Tiger·tec Gold coating combined with the WSM35G grade provides a balance of thermal resistance and edge toughness that reduces premature wear during interrupted cuts. This configuration promotes stable cutting‑edge life when machining stainless steels and nickel‑based superalloys; the result is fewer insert changes, longer uninterrupted machining runs and improved overall equipment effectiveness. The coating’s microstructure improves heat dissipation and adhesion, reducing the risk of built‑up edge in sticky materials. Consistent chip control and surface quality The round plate geometry together with the D57 chipbreaker is engineered to generate predictable chip forms across a range of depths of cut. Predictable chip formation reduces tool‑holder vibration and supports consistent surface finish, which is essential for follow‑up operations and tight tolerance work. The insert’s design therefore contributes directly to process reliability and minimises rework, supporting a more economical machining cycle with better first‑pass yield. Simple process integration and repeatable results The insert’s standard form and tolerance class H allow straightforward integration into existing milling tool systems while maintaining repeatable position accuracy. The ROHX1204M0‑D57 WSM35G insert is available in execution code X and size code 12, enabling consistent indexable‑insert changeovers and easy inventory management. Clear labelling and adherence to established series conventions simplify tool selection and support leaner tooling logistics on the shop floor. Contact Metav Werkzeuge for application guidance, availability and to discuss which Walter Tools Tiger·tec Gold inserts best suit the specific machining task Technical data Article number: ROHX1204M0-D57-WSM35G-WALTER Designation: ROHX1204M0-D57 WSM35G SKU / Label: Fräswendeschneidplatte ROHX1204M0-D57 WSM35G Walter Tools Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WSM35G Tolerance class: H Size code: 12 Thickness code: 04 Applications & features Shape: round Chipbreaker: D57 Execution: X Material groups: S / M Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) FAQ What materials is this insert suitable for? The ROHX1204M0‑D57 WSM35G insert is specified for stainless steels and heat‑resistant superalloys; the WSM35G grade and Tiger·tec Gold coating promote secure chip formation and edge stability in these materials. How does the D57 chipbreaker affect performance? The D57 chipbreaker delivers controlled chip segmentation and evacuation, improving surface quality and reducing the risk of built‑up edge during milling operations with the Walter Tools insert. Can the round 12 form be used in standard milling pockets? Yes, the round 12 form is compatible with common indexable‑insert pocket geometries and supports uncomplicated tool changes with repeatable pocket seating. What benefits does the Tiger·tec Gold technology bring? Tiger·tec Gold offers enhanced thermal resistance and improved coating adhesion, which together increase tool life and maintain cutting‑edge integrity in demanding applications. Is this insert suitable for interrupted cuts and heavy engagement milling? The combination of the WSM35G grade and the insert’s geometry provides robust cutting‑edge stability suitable for many interrupted‑cut scenarios; tool selection should be validated for specific cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no commercial or corporate connection between Metav Werkzeuge and the mentioned brands. The offered item is original, brand‑new product from the manufacturer.
ROHX1204M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSP45G grade delivers a reliable balance of edge stability and versatile material compatibility, reducing tool changes and improving throughput. The round insert geometry with D57 chipbreaker ensures predictable chip formation and easier process control. Order the insert via Metav Werkzeuge or contact our advisors for tailored recommendations. ROHX1204M0-D57 WSP45G indexable milling insert — Tiger·tec Gold, Walter Tools A ROHX1204M0-D57 WSP45G indexable milling insert engineered for dependable performance in general milling of steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating for stable edge Suitable for Steel, Stainless steel and Superalloys Round insert 12 mm, thickness 04, D57 chipbreaker Optimised for secure chip control and durability Predictable performance from a proven coating technology The combination of the Tiger·tec Gold coating and the WSP45G grade provides a controlled tool life under varied machining conditions. The PVD coating increases resistance to abrasive wear and thermal loading, which translates to fewer unplanned interventions and more consistent production cycles. By specifying this grade, workshops benefit from a stable cutting edge that sustains surface quality across interrupted and continuous cuts, improving process reliability and lowering the effective cost per component. Fewer tool variants thanks to broad material suitability Designed for the material groups P / M / S, the insert suits unalloyed and alloyed steel, stainless steel and heat-resistant superalloys and titanium alloys. This broad applicability reduces the need for multiple specialised grades on the shop floor: one insert can cover several workpiece families while maintaining cutting performance. For operations seeking inventory simplification, the universal behaviour of this grade supports faster job changes and streamlined tooling management. Geometry focused on chip control and repeatability The round insert form and the D57 chipbreaker deliver reliable chip formation in a wide range of feeds and depths of cut. The insert dimensions (12 mm diameter, thickness 04) are matched to robust clamping systems and ensure repeatable positioning in the cutter body. Good chip control reduces the risk of entanglement and improves surface finish, especially in operations where continuous chip evacuation matters. The result is more predictable cycle times and fewer interruptions for chip clearing. Integrates into productive workshop workflows With tolerance class H and Walter Tools’ manufacturing standards, the insert offers consistent fitment and interchangeability across compatible toolholders. The grade’s emphasis on edge strength and heat resistance supports higher cutting parameters where process security is required, contributing to increased productivity. For technical queries or to confirm the best cutter body and clamping for a given setup, our team is available to provide additional cutting data and selection support via email or phone. For fast procurement and expert advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ROHX1204M0-D57-WSP45G-WALTER Designation: ROHX1204M0-D57 Product type: Fräswendeschneidplatte / indexable milling insert Manufacturer: Walter Tools Grade: WSP45G Series: Tiger·tec Gold Core data Size: 12 Thickness: 04 Chipbreaker: D57 Tolerance class: H Special features Coating: Tiger·tec Gold (PVD) Material suitability: P / M / S (steel, stainless steel, superalloys) Insert shape: Rund (round) Series family: Tiger·tec Gold Execution code: X FAQ What materials is this insert suitable for? The ROHX1204M0-D57 WSP45G insert is suitable for material groups P / M / S, which correspond to steel, stainless steel and heat-resistant superalloys. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on this insert increases wear resistance and thermal stability, delivering a more consistent cutting edge and improved process security during milling. What role does the D57 chipbreaker play? The D57 chipbreaker is engineered to produce predictable chips across a range of feeds, enhancing chip control and reducing manual clearing during continuous or interrupted cuts. Is the insert compatible with standard round-pocket milling cutters? The round geometry and the ROHX1204M0-D57 designation indicate compatibility with cutters designed for round inserts of this size; correct seat fitment should be verified against the cutter body specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the manufacturers. The offered item is an original, factory-new product of Walter Tools.
ROHX1204M0-D67 W3536 X Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, consistent seating accuracy and a compact geometry to ensure predictable milling performance. Order the insert directly via Metav Werkzeuge or consult our specialists for compatibility with the specific machining matrix. ROHX1204M0-D67 ROHX1204M0-D67 W3536 — Round milling indexable insert, D67 chipbreaker, Walter Tools A ROHX1204M0-D67 W3536 is a round milling indexable insert designed for general-purpose milling where reliable chip control and repeatable seating are required. Round insert for versatile milling D67 chipbreaker for stable chip control Size 12, thickness 04 for standard toolholders Tolerance class H for consistent seating Predictable chip formation for efficient material removal The combination of the D67 chipbreaker and the Walter grade W3536 supports stable chip formation during interrupted and continuous cuts. The chip geometry reduces the risk of long, stringy chips and promotes safe evacuation from the cutting zone, which in turn helps maintain a uniform cutting force and extends tool life. For unfamiliar materials, the material suitability should be verified against the manufacturer's product matrix before production use to ensure optimum performance. Consistent clamping and repeatability to reduce setup time A round insert with specified size 12 and thickness 04 simplifies indexable strategies and reduces the variety of spare parts required in the tool crib. The declared tolerance class H indicates a consistent seat fit in compatible toolholders, which supports repeatable positioning and minimises run-out. These geometric consistencies lower setup time and contribute directly to machining stability, especially when series production demands identical results across lots. Practical integration into machining processes and material coverage The insert is supplied in Walter’s open series and is catalog-dependent for substrate and coating details, which offers flexibility across different production requirements. When integrated into a defined tool system, the insert’s geometry and chipbreaker are engineered for controlled cutting in a broad range of workpiece families; however, final feed and speed parameters should be derived from the toolholder and machine capability. For process planning, pair the insert’s characteristics with suitable cutters and verify the recommended application range in the product documentation or with a technical consultant. Contact Metav Werkzeuge today to confirm the ROHX1204M0-D67 W3536 suitability for the intended component material and to arrange fast delivery or consultancy through Metav Werkzeuge. Technical data SKU: ROHX1204M0-D67-W3536-WALTER Article label: Fräswendeschneidplatte ROHX1204M0-D67 W3536 Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Tolerance: H Special features Chipbreaker: D67 Shape: Round Grade: W3536 Series: Walter Schneidstoffsorte - Serie offen Execution: X Material designation: Katalogabhängig Additional note: Check workpiece suitability in the product matrix FAQ What materials is this insert recommended for? The ROHX1204M0-D67 W3536 is part of Walter’s open series; material suitability should be checked in the Walter product matrix to confirm the optimal workpiece families for this grade. Can the ROHX1204M0-D67 be used in any round toolholder? The insert’s round form and tolerance class H are designed for compatible toolholders, but confirmation with the holder’s specifications is advised to guarantee proper seating and performance. How does the D67 chipbreaker influence machining? The D67 chipbreaker produces shorter, more manageable chips and reduces the chance of chip entanglement, which supports stable cutting forces and helps preserve the cutting edge during milling. Is coating information available for the insert? Coating and substrate details are catalog-dependent for this Walter grade; the specific coating is listed in the manufacturer’s documentation and should be referenced when selecting cutting parameters. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new merchandise from the manufacturer Walter Tools.
ROHX1204M0-D67 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WKP35G grade for durable, repeatable performance in machining Stahl and Gusseisen; the D67 chipbreaker and round 12 form provide controlled chip flow and stable cutting action. For procurement or technical questions, contact Metav Werkzeuge or request advice from our consultants. ROHX1204M0-D67 WKP35G milling indexable insert — Tiger·tec Gold, round 12 (Walter Tools) A ROHX1204M0-D67 WKP35G milling indexable insert optimised for productive machining of Stahl and Gusseisen, combining a high-performance coating with a geometry designed for reliable chip control Tiger·tec Gold coating for improved wear resistance Optimised D67 chipbreaker for secure chip control Round 12 form for stable milling performance Suitable for Stahl and Gusseisen Greater uptime through a wear-resistant coating The Tiger·tec Gold technology together with the WKP35G coated-carbide grade gives a clear advantage in longevity and process stability. Coated carbide means a hard base carbide substrate with a multi-layer surface coating that reduces abrasive wear and protects the cutting edge against thermal and mechanical stresses. The direct benefit is longer edge life and fewer index changes, which contributes to predictable tool cycles and reduced unplanned downtime. Consistent chip control and stable cutting action The insert's geometry — a round plate with D67 chipbreaker — is engineered to shape chips reliably across typical feeds and depths used on Stahl and Gusseisen. A controlled chip form reduces the risk of clogging and allows higher metal removal rates without compromising surface quality. The round form also assists in even distribution of cutting forces, leading to improved stability and repeatable results in both roughing and semi‑finishing operations. Practical benefits for workshop efficiency Specification details such as the ROHX designation and the compact plate thickness support flexible use in a wide range of clamping systems for milling. The combination of the Tiger·tec Gold coating and the WKP35G grade means trusted performance for batch production and single-piece machining alike. The result is a measurable increase in process reliability and a reduction in tool-change frequency, especially where consistent surface quality and predictable tool life are priorities. Walter Tools' engineering focus ensures the insert integrates into existing tool sets with minimal adaptation. For tailored application advice or to order this Walter Tools Tiger·tec Gold insert via Metav Werkzeuge, please contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will assist with compatibility and availability. Technical data SKU: ROHX1204M0-D67-WKP35G-WALTER Label: Fräswendeschneidplatte ROHX1204M0-D67 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Material group: P / K Execution: X Shape: Round Chipbreaker: D67 Designation (without grade): ROHX1204M0-D67 ISO designation: ROHX1204M0-D67 WKP35G UID: ROHX1204M0-D67-WKP35G-WALTER Facts Size: 12 Thickness: 04 Tolerance class: H Special features Coated-carbide grade WKP35G Tiger·tec Gold coating technology Suitable for Stahl (ISO group P) Suitable for Gusseisen (ISO group K) Round insert form for stable force distribution D67 chipbreaker for controlled chip formation FAQ What materials is this insert designed to machine? The ROHX1204M0-D67 WKP35G insert is specified for machining Stahl (ISO group P) and Gusseisen (ISO group K), reflecting the WKP35G grade and Tiger·tec Gold coating optimised for these material groups. What performance benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WKP35G grade improves wear resistance and thermal stability, giving the ROHX1204M0-D67 WKP35G longer edge life and more consistent cutting performance under variable loads. Which tasks are best suited to the D67 chipbreaker? The D67 chipbreaker is intended for secure chip control during general milling tasks; it supports reliable chip formation for both roughing and semi‑finishing on Stahl and Gusseisen when used with appropriate feeds and speeds. How does the round insert form affect machining stability? The round form enhances distribution of cutting forces and reduces vibration tendencies, which results in more stable cutting and repeatable surface quality when the ROHX1204M0-D67 WKP35G is indexed during production runs. How can compatibility with existing toolholders be verified? Refer to the ROHX designation and physical dimensions of the insert—ROHX1204M0-D67—as the primary reference for matching holders; for specific holder compatibility, consult Metav Werkzeuge or the toolholder manufacturer with the SKU ROHX1204M0-D67-WKP35G-WALTER Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX1204M0-D67 WSM35G X Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WSM35G grade and the D67 chipbreaker for stable edge life and reliable chip control in demanding materials; order the ROHX1204M0-D67 WSM35G milling insert directly via Metav Werkzeuge or request expert advice from their consultants. ROHX1204M0-D67 WSM35G milling insert – Tiger‑tec Gold for stainless steels and superalloys | Walter Tools A ROHX1204M0-D67 WSM35G milling insert engineered for heavy-duty milling where thermal resistance and edge stability are essential ROHX1204M0-D67 WSM35G by Walter Tools Tiger‑tec Gold coating for thermal resistance Round insert, size 12 with D67 chipbreaker Optimised for stainless steels and superalloys High thermal resistance for consistent cutting performance The combination of the Tiger‑tec Gold coating and the WSM35G carbide grade provides enhanced heat resistance and improved wear behaviour during continuous cutting. This makes the insert particularly suited to machining stainless steels and high‑temperature alloys, where heat buildup challenges edge life. The coated substrate reduces adhesion and built‑up edge, which in turn supports consistent part quality and predictable tool change intervals, helping to maintain throughput in production environments. Secure chip control and edge stability in demanding workpieces The D67 chipbreaker geometry and the round plate form promote controlled chip formation and evacuation in interrupted and continuous milling. Stable chip control reduces the load on the cutting edge and the machine spindle, decreasing the risk of vibration and unexpected tool failure. For workshops machining ferritic or austenitic stainless steel grades or nickel‑base superalloys, this combination supports repeatable surface finishes and decreased rework rates, translating into measurable efficiency gains on the shop floor. Practical integration for process reliability and productivity Designed with standard ISO designation and a tolerance class H, the insert fits common toolholders and clamping systems without additional adjustment. The compact size 12 format and thickness 04 provide a balance between insert rigidity and versatility across milling applications. Using this insert as part of a well‑matched cutter body allows for predictable cycle times, reduced downtime and easier planning of tool inventories — all advantages when aiming for stable, cost‑efficient machining of demanding materials. Contact Metav Werkzeuge today for tailored cutting data and ordering support for Walter Tools Tiger‑tec Gold inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: ROHX1204M0-D67-WSM35G-WALTER Description: Fräswendeschneidplatte ROHX1204M0-D67 WSM35G Walter Tools SKU / UID: ROHX1204M0-D67-WSM35G-WALTER Facts Plate size: 12 Plate thickness: 04 Tolerance class: H Plate form: Round Special features Coating: Tiger‑tec Gold Grade: WSM35G Chipbreaker: D67 Series: Tiger‑tec Gold Material applicability: stainless steels and heat‑resistant superalloys / titanium Execution: X FAQ What materials is this insert suitable for? The ROHX1204M0-D67 WSM35G insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), providing thermal stability and controlled chip formation. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the Walter Tools insert increases thermal resistance and reduces adhesion, which helps to extend tool life and maintain consistent surface quality during extended cuts. Which chipbreaker is fitted and what is its advantage? This insert uses the D67 chipbreaker, optimised for secure chip control in both continuous and interrupted milling, reducing vibration and improving edge stability. Is the insert compatible with standard holders? Yes; the ROHX1204M0-D67 WSM35G follows common ISO dimensions and a tolerance class H, allowing straightforward integration into standard milling cutter bodies. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX1204M0-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, reliable D67 chip control and precise tolerance for consistent milling results; order the insert directly via Metav Werkzeuge or contact our consultants for application support. ROHX1204M0-D67 WSP45G milling indexable insert — Tiger·tec Gold, for steel, stainless steel and superalloys — Walter Tools ROHX1204M0-D67 WSP45G is a round milling indexable insert designed for versatile, high-performance milling across a broad range of materials, offering a robust cutting edge and predictable chip formation Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Round insert with D67 chipbreaker Stable cutting edge for productive milling Longer tool life through advanced coating technology The Tiger·tec Gold series combines a wear-resistant PVD-coated carbide substrate that is engineered to reduce flank wear and protect the cutting edge during continuous milling. This coating technology promotes longer tool life and reduces the frequency of index changes, which directly supports higher uptime and lower consumable costs in production environments. For practical terms, the harder outer layer lowers abrasion and adhesion, while the tougher substrate beneath absorbs impact—benefits that translate into fewer interruptions and steadier productivity on the shop floor. Consistent machining across steel, stainless steel and heat-resistant alloys Designed for the ISO groups P, M and S, this insert handles common steels, rostfreier Stahl (stainless steel) and heat-resistant superalloys or titanium with predictable behaviour. The WSP45G grade balances toughness and red hardness, helping to avoid built-up edge when machining sticky stainless or the high temperatures encountered with nickel-based alloys. In practice, this means fewer surface defects and better repeatability on serial parts—advantages particularly relevant for contract manufacturers and aerospace or medical component producers who demand tight surface and dimensional consistency. Improved chip control and surface finish with round geometry The round insert geometry paired with the D67 chipbreaker supports controlled chip formation at a range of feed rates, reducing the risk of entangling or long stringy chips in interrupted cuts. Round inserts are inherently rigid and distribute cutting forces evenly, which helps to deliver a smoother surface finish and dampen vibration in many milling strategies. The combination of geometry and chipbreaker therefore enables stable performance during shoulder milling and trochoidal passes, aiding both efficiency and part quality. Precision and process reliability for productive milling With a tolerance class H and execution marked as X, the design focuses on repeatable seat fit and consistent cutting behaviour across index changes. The nominal size 12 and thickness 04 establish a compact yet robust cutting edge suitable for a wide variety of milling fixtures. For production planners, this precision reduces setup variance and supports predictable tool life planning, which in turn simplifies inventory control and process documentation on the shop floor—key elements for lean manufacturing and quality management systems. Discuss machining strategies and supply options for the Tiger·tec Gold ROHX1204M0-D67 WSP45G insert with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ROHX1204M0-D67-WSP45G-WALTER Designation: ROHX1204M0-D67 WSP45G Series: Tiger-tec Gold Grade: WSP45G Execution: X Tolerance class: H Facts Insert size: 12 Thickness: 04 Chipbreaker: D67 Shape: Round Special features Material grade: P / M / S Coating technology: Tiger·tec Gold (PVD) Application: milling indexable insert Brand: Walter Tools FAQ What materials can this insert machine effectively? The ROHX1204M0-D67 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for machining steel, rostfreier Stahl (stainless steel) and heat-resistant superalloys including titanium. Which chipforming behaviour can be expected with the D67 chipbreaker? The D67 chipbreaker on this round insert produces short, controllable chips in a wide range of feeds, which supports stable milling and easier chip evacuation during interrupted cuts. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating on the ROHX1204M0-D67 WSP45G insert increases wear resistance and thermal stability, resulting in improved edge life and more consistent surface finishes over longer tool lifetimes. Is the insert suitable for high-feed or trochoidal milling strategies? Yes, the round geometry combined with the D67 chipbreaker and robust grade offers good rigidity and chip control, making the insert appropriate for trochoidal and other high-efficiency milling methods. What does tolerance class H mean for setup and interchangeability? Tolerance class H indicates a tight dimensional tolerance for the insert, ensuring repeatable seating and consistent cutting positions when replacing indexes during production. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ROHX1204M0-F67 W3536 X Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, a versatile round form and the proven W3536 grade for consistent, productive milling results; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. ROHX1204M0-F67 W3536 milling indexable insert — F67 chipbreaker, round form, Walter Tools The ROHX1204M0-F67 W3536 is a round milling indexable insert designed for versatile finishing and medium-duty milling applications, featuring the F67 chipbreaker for improved chip flow and process stability Stable chip control with F67 chipbreaker Round insert for multi-directional milling Series W3536 for wide material coverage Durable design suited to productive machining Increase process reliability with controlled chip evacuation The combination of the F67 chipbreaker and the W3536 grade focuses on reliable chip formation and evacuation, which reduces interruptions and enables longer uninterrupted cutting cycles. In practical terms, better chip control helps to avoid rework and tool-related stoppages, contributing to a more predictable production rhythm. The round geometry also permits flexible engagement angles, supporting a variety of milling strategies without frequent insert changes. Flexible mounting and consistent cutting geometry for varied tasks A round insert format delivers multi-directional mounting options and simplifies toolholder inventory. The round form with size designation 12 and thickness 04 provides a compact profile that is easy to position in common milling bodies, while maintaining a stable cutting edge. This leads to consistent surface finishes and repeatable results when combined with suitable toolholders and process parameters, improving overall productivity on the shop floor. Practical selection guidance for industrial applications The W3536 cutting grade is a Walter Tools series material; the specific subclass is not always explicit in catalogues, so matching the grade to the workpiece material should be done via the manufacturer's product matrix. For unfamiliar materials or special alloys, it is advisable to check the recommended cutting data and trials. This pragmatic approach reduces the risk of suboptimal performance and helps to secure the expected tool life and surface integrity. Benefits that translate into measurable productivity Choosing an insert with emphasised chip control and a robust grade supports higher machine utilisation and fewer tool changes. The design intent behind this insert is productive machining with stable edge behaviour, which can shorten setup times and reduce scrap. For operations seeking steady, repeatable outcomes in milling, this insert offers a balance between operational convenience and technical performance. Discuss specific application suitability with Metav Werkzeuge or request tailored recommendations for the ROHX1204M0-F67 W3536 insert by contacting Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: ROHX1204M0-F67-W3536-WALTER Designation: ROHX1204M0-F67 W3536 Product type: milling indexable insert Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Shape: Round Tolerance class: H Special features Chipbreaker: F67 Grade: W3536 Series: Walter Schneidstoffsorte - Serie offen Execution: X Plate designation without grade: ROHX1204M0-F67 ISO designation: ROHX1204M0-F67 W3536 FAQ Which materials is this insert suitable for? The ROHX1204M0-F67 W3536 insert is part of the Walter Tools W3536 series; specific material suitability should be checked in the manufacturer's product matrix for precise recommendations. How does the F67 chipbreaker affect machining? The F67 chipbreaker on this insert improves chip formation and evacuation, which promotes process stability and fewer interruptions during milling. Can the round insert be used in different holder orientations? Yes, the round form and compact size make the insert suitable for multi-directional mounting, offering flexibility across various toolholder designs. What is the best way to verify performance before series production? Run a short trial using the ROHX1204M0-F67 W3536 insert under representative cutting conditions and consult Walter Tools cutting data to verify tool life and surface finish expectations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is original, factory-new goods from the manufacturer.
ROHX1204M0-F67 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WKP35G grade for consistent wear resistance and reliable chip control; suitable for demanding Stahl and Gusseisen applications. Order via Metav Werkzeuge or contact the consultants for application guidance. ROHX1204M0-F67 WKP35G milling indexable insert — Tiger·tec Gold, round Ø12 mm | Walter Tools The ROHX1204M0-F67 WKP35G is a round milling indexable insert designed for productive finishing and general milling of Stahl and Gusseisen components. Tiger·tec Gold coating for extended tool life WKP35G grade tuned for mixed materials F67 chipbreaker for consistent chip control Round 12 mm format for versatile milling Consistent performance through coating and grade The combination of the Tiger·tec Gold series and the WKP35G grade provides enhanced wear resistance and thermal stability in serial milling. The coated cemented carbide construction reduces flank wear and helps maintain cutting-edge integrity over longer tool life. For operations where cycle-time stability matters, this insert offers predictable performance and fewer interruptions for index changes. The round geometry aids in distributing cutting forces evenly, contributing to stable machining of medium- to high-volume batches. Reliable chip control for cleaner machining Equipped with the F67 chipbreaker, the insert delivers controlled chip formation during transverse and trochoidal milling passes. Controlled chips reduce the risk of re-cutting and machine downtime while improving surface quality. The chipbreaker design permits effective evacuation when machining Stahl and Gusseisen, lowering the likelihood of built-up edge and abrasive wear. This leads to more consistent tolerances and a smoother downstream process for parts requiring minimal rework. Flexible application range for production workshops The insert’s specification suits a broad range of milling tasks where material groups P and K are encountered. It supports efficient removal rates in mixed production environments that process both Stahl and Gusseisen, simplifying tooling inventories. The round, Ø12 mm format and the tolerant designation H ensure straightforward handling in common toolholders and offer repeatable seating during indexing. Such versatility reduces tooling complexity and helps to streamline setup times across jobs. Integration and process benefits Using an indexable insert from a recognised family like Tiger·tec Gold brings advantages in process security and reproducibility. The robust grade and chip control allow longer intervals between tool changes and more consistent surface finishes, which contributes to predictable cost-per-part calculations. For procurement and planning, the standardised geometry and clear ISO-style designation simplify replacement orders and tool management in production planning systems. For application-specific recommendations and local availability of Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical support and supply. Technical data SKU: ROHX1204M0-F67-WKP35G-WALTER Article designation: ROHX1204M0-F67 WKP35G Manufacturer: Walter Tools Facts Format: round Size: 12 Thickness: 04 Chipbreaker: F67 Tolerance class: H Special features Grade: WKP35G Series: Tiger·tec Gold Material suitability: P / K (Stahl / Gusseisen) Execution: X ISO designation: ROHX1204M0-F67 WKP35G Plate form: Rund FAQ What materials is this insert suitable for? The ROHX1204M0-F67 WKP35G insert is designed for machining Stahl and Gusseisen, using the P/K suitability indicated by the WKP35G grade. What is the chip control design used? The insert uses the F67 chipbreaker to provide consistent chip formation and evacuation in milling operations. Which series and coating technology does this insert belong to? This insert is part of the Tiger·tec Gold series and uses the WKP35G coated carbide grade for enhanced wear resistance. What format and size does the insert have? The insert is a round type with a size designation of 12 and a thickness marked as 04. How does the tolerance class H affect use? Tolerance class H indicates the manufacturing tolerance of the insert; it supports repeatable seating and consistent positioning in standard toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX1204M0-F67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, the WSM35G grade and a proven chipbreaker for secure machining of demanding alloys; order directly via Metav Werkzeuge or consult our application specialists if required. ROHX1204M0-F67 WSM35G – Indexable milling insert, round, Tiger·tec Gold, Walter Tools The ROHX1204M0-F67 WSM35G is a round indexable milling insert designed for high-demand machining of rostfreier Stahl and heat-resistant superalloys, offering a robust cutting edge and reliable chip formation in heavy-duty milling applications Tiger·tec Gold coating for high process security Optimised chipbreaker F67 for stable chip control For rostfreier Stahl and superalloys (S / M) Round insert, 12 mm diameter, tolerance H High-process security for demanding materials The combination of the Tiger·tec Gold series and the WSM35G grade delivers a coated carbide structure engineered for thermal stability and wear resistance. This construction helps maintain a stable cutting edge when machining materials that tend to work-harden or generate heat, such as rostfreier Stahl and titanium alloys. The result is predictable tool behaviour and reduced risk of built-up edge, which supports consistent surface quality and fewer unplanned tool changes. Controlled chip formation to protect the tool and workpiece Equipped with the F67 chipbreaker and a round geometry, the insert promotes reliable chip control even under variable cutting conditions. Improved chip formation reduces vibration and minimises the likelihood of re-cutting chips, which in turn preserves the insert’s edge and contributes to longer effective tool life. For production environments seeking repeatable cycle times, the insert’s geometry offers tangible efficiency gains and simpler process parameter optimisation. Practical benefits for workshop and production use The round plate with a 12 mm size and tolerance H provides flexible indexing options and straightforward seating in compatible toolholders. The solid construction and coated carbide substrate support interruptions and mixed-batch work, enabling productive removal rates without sacrificing surface finish. Where cost-efficiency and operational reliability are priorities, the insert’s specification supports predictable maintenance intervals and easier inventory matching across series. Application guidance and suitability notes This insert is specified for the machining groups S and M according to ISO classification, making it suitable for heat-resistant superalloys and rostfreier Stahl where thermal load and edge stability are critical. Selection of cutting parameters should consider material toughness and machine power; the insert’s coating and chipbreaker are designed to expand the window of effective cutting speeds and feeds while helping to avoid premature edge failure. For tailored application advice on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific rostfreier Stahl or superalloy tasks Technical Data SKU: ROHX1204M0-F67-WSM35G-WALTER Label: Fräswendeschneidplatte ROHX1204M0-F67 WSM35G Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSM35G Manufacturer: Walter Tools Facts Plate form: Round Plate size: 12 Thickness: 04 Chipbreaker: F67 Tolerance class: H Special features Coated carbide Suitable for rostfreier Stahl (M) Suitable for superalloys / titanium (S) Version: X ISO designation: ROHX1204M0-F67 WSM35G FAQ Is this insert suitable for machining rostfreier Stahl? The ROHX1204M0-F67 WSM35G is specified for the ISO material group M and is therefore suited to machining rostfreier Stahl, with the Tiger·tec Gold coating supporting secure chip formation and thermal stability. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold offers a robust coated carbide substrate that enhances wear resistance and heat tolerance; the WSM35G grade improves process security in demanding milling operations. How does the F67 chipbreaker affect machining? The F67 chipbreaker on this round insert promotes reliable chip control and reduces the risk of re-cutting, supporting a stable cutting edge and improved surface quality in interrupted or continuous cuts. Which toolholders are compatible with this round insert? Compatibility depends on the toolholder’s seat and clamp designed for ROHX-style round plates; the 12 mm size and tolerance H allow integration into standard toolholder systems intended for this ISO designation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation. The offered item is an original, factory-new product of the manufacturer.
ROHX1204M0-F67 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the versatile WSP45G grade for reliable, long‑life milling in demanding materials; the round Ø12 form with F67 chipbreaker ensures consistent chip control and stable cutting edges. Order the ROHX1204M0-F67 WSP45G directly via Metav Werkzeuge or consult our specialists for process‑specific recommendations. ROHX1204M0-F67 WSP45G milling insert (round Ø12, F67 chipbreaker) by Walter Tools The ROHX1204M0-F67 WSP45G is a round milling insert engineered for high‑productivity machining of Stahl, rostfreier Stahl and heat‑resistant superalloys, combining a tough PVD grade with Tiger·tec Gold coating for extended tool life and process security. Tiger·tec Gold PVD coating WSP45G grade for P/M/S applications Round insert Ø12 with F67 chipbreaker Stable cutting edge and long tool life Faster, more reliable milling through advanced coating technology The Tiger·tec Gold PVD coating offers enhanced wear resistance and thermal stability, which directly translates into longer tool life and fewer indexings. For milling operations in Stahl and demanding alloys, the coating reduces crater wear and supports higher cutting parameters without compromising surface quality. This means improved machine utilisation and lower tool‑change frequency, benefiting production throughput. The coated, WSP45G grade is formulated to manage typical heat and adhesion tendencies in steel and to provide reliable performance in tougher materials. Consistent chip control and stable cutting edges for productive runs A dedicated F67 chipbreaker on a round cutting geometry provides predictable chip formation and evacuation, which reduces rework and tool interruptions. The round plate geometry offers multi‑edge indexing for economical use of each insert; combined with the grade’s toughness it helps maintain a stable cutting edge under interrupted cuts or varying engagement. Good chip control reduces the risk of built‑up edge and improves surface finish, making the insert suitable for both roughing and semi‑finishing applications where process stability is essential. Broad material coverage with clear application guidance The insert’s designation for P / M / S indicates targeted suitability: P for unalloyed and alloyed Stahl, M for rostfreier Stahl with its higher tendency to work‑harden, and S for heat‑resistant superalloys and titanium where thermal resistance and edge stability are critical. Selecting the WSP45G grade with Tiger·tec Gold enables machining strategies that balance cutting speed and tool life. For less experienced users, this combination simplifies grade choice across mixed batches and reduces the need for multiple specialised inserts. Practical design details that support shopfloor efficiency The round insert with size 12 and thickness code 04 is manufactured to tolerance class H, ensuring repeatable seating and secure clamping in compatible toolholders. The insert’s execution and coated carbide substrate deliver a compromise between toughness and wear resistance, suited to applications with varying feed rates and cut depths. Using this insert can streamline inventory by covering several machining tasks with a single grade, while retaining the option to optimise speeds and feeds for specific workpiece alloys. Select Walter Tools Tiger·tec Gold inserts from Metav Werkzeuge for improved process reliability — contact Metav Werkzeuge for tailored application advice and to match the ROHX1204M0-F67 WSP45G to specific machining conditions Technical Data SKU: ROHX1204M0-F67-WSP45G-WALTER ISO designation: ROHX1204M0-F67 WSP45G Label: Fräswendeschneidplatte ROHX1204M0-F67 WSP45G Walter Tools Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F67 Form: Round Material suitability: P / M / S Execution: X FAQ What materials can be machined with this insert? The ROHX1204M0-F67 WSP45G is designed for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (P / M / S), providing reliable performance across those ISO groups. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold PVD coating on the WSP45G grade reduces wear and improves thermal resistance, which extends tool life and allows for more consistent milling in demanding conditions. Is the chipbreaker suitable for finishing operations? The F67 chipbreaker supports controlled chip formation and works well for both roughing and semi‑finishing, delivering improved surface quality when process parameters are optimised. Can the round Ø12 geometry be indexed multiple times? Yes, the round form offers multiple cutting edges for economical indexing, and the insert’s tolerance class H ensures repeatable seating in compatible toolholders. Which machining situations favour choosing this grade over others? Choose the WSP45G grade when a balance of toughness and wear resistance is required across mixed batches of Stahl, rostfreier Stahl and high‑temperature alloys, especially where consistent chip control is needed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Trademarks and trade names are the property of their respective owners. The mentioned brand is included for explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the brand owner.
ROHX1204M08-A57 WHH15X Wendeplatten - Walter Tools
Benefit from the combination of a proven WHH15X coated carbide grade, a reliable A57 chipbreaker and a compact round geometry for consistent tool engagement; order the insert directly via Metav Werkzeuge or consult their specialists for application support. ROHX1204M08-A57 WHH15X — Round indexable milling insert, A57 chipbreaker (Walter Tools) A ROHX1204M08-A57 WHH15X indexable milling insert designed to deliver stable chip formation and dependable performance in general milling tasks, suitable for integration into modular cutter systems. Round geometry for consistent seating A57 chipbreaker for controlled chipflow WHH15X coated carbide for wear resistance Tolerance class H for precise fit Consistent chip control for improved throughput The combination of the A57 chipbreaker and the WHH15X coated carbide grade focuses on delivering reproducible chip formation and improved process stability. In practical terms, this means fewer unexpected interruptions from poor chip evacuation and a more consistent surface finish across production batches. The insert’s chipbreaker is engineered to break and direct chips reliably under a range of cutting conditions; as a result, machining runs benefit from reduced tool change frequency and steadier cycle times. Where appropriate, a coolant strategy and correct cutting parameters will accentuate these gains and extend the useful tool life. Compact form and fit for accurate assembly Round geometry and the H tolerance class simplify seating and alignment in applicable cutter bodies, reducing set-up time and ensuring repeatable positioning in multi-insert cutters. The designation codes (ROHX1204M08-A57) encode key mechanical details such as geometry and chipbreaker type, while the thickness code 04 and size 12 indicate the insert form factor for compatible holders. These standardised identifiers enable straightforward stock management and fast identification when replacing inserts on the shop floor. For exact holder compatibility and to confirm suitability for specific tool systems, consult the cutter manufacturer’s catalogue or Metav Werkzeuge’s technical advisers. Production-ready quality and brand backing As a member of Walter Tools’ product family, this insert benefits from established manufacturing controls and a tested coating process that aims to balance wear resistance and cutting-edge stability. The WHH15X grade is a coated carbide formulation; its precise application range is defined in the product matrix, so verification against the intended workpiece material is advised before series use. Integrating this insert into a standardised tooling strategy helps maintain consistent part quality and supports predictable replacement cycles. For procurement or batch planning, the insert’s stable specification reduces variability between lots and facilitates inventory control. For a reliable evaluation and rapid supply of the ROHX1204M08-A57 WHH15X by Walter Tools, contact Metav Werkzeuge for application guidance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU / ID: ROHX1204M08-A57-WHH15X-WALTER Product type: Indexable milling insert ISO designation: ROHX1204M08-A57 WHH15X Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Execution: X Tolerance class: H Numbers / Facts Size designation: 12 Thickness code: 04 Chipbreaker code: A57 Tolerance: H Design & special features Geometry: round Grade: WHH15X (coated carbide) Plate form: ROHX1204M08-A57 Material information: Katalogabhängig Chipformer: A57 FAQ What is the primary function of the A57 chipbreaker? The A57 chipbreaker on the ROHX1204M08-A57 WHH15X insert directs and breaks chips to improve evacuation and promote consistent cutting performance with the WHH15X coated carbide grade from Walter Tools. Is the WHH15X grade coated or uncoated? WHH15X is a coated carbide grade; the ROHX1204M08-A57 WHH15X insert uses this coating to enhance wear resistance and process stability, with material suitability to be checked in the product matrix. Which cutter bodies accept this round insert format? The ROHX1204M08-A57 WHH15X is a round indexable insert with size designation 12 and thickness code 04; it is intended for cutter systems designed for ROHX-series round inserts—verify holder compatibility in the cutter manufacturer's documentation. How should material suitability be verified for production? Material suitability for the ROHX1204M08-A57 WHH15X should be confirmed against the product’s application matrix; for tailored recommendations, Metav Werkzeuge’s technical advisers can review the specific workpiece material and machining conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and protected trademarks are mentioned solely for explanatory purposes. They are the property of their respective owners. There is no affiliation between our company and the named brands; the listed article is offered as original, factory-new product of the manufacturer.
ROHX1204M08-A57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, high wear resistance, and optimised chip control for consistent cast iron productivity; order the insert directly via Metav Werkzeuge or contact the advisers for process recommendations. ROHX1204M08-A57 WKK25G milling insert — Tiger·tec Gold, for cast iron | Walter Tools A ROHX1204M08-A57 WKK25G indexable milling insert designed for efficient, high-abrasion machining of cast iron components in production environments Tiger·tec Gold coating for high wear resistance Designed for abrasive cast iron machining Round 12 mm insert with A57 chipbreaker Stable edge and reliable chip control Increase throughput with a wear-resistant grade The Tiger·tec Gold coating combined with the WKK25G grade delivers measurable improvements in edge life when machining abrasive materials. This insert is engineered to resist the short, breaking chips typical of grey and nodular cast iron, reducing tool changes and machine downtime. The result is a more predictable process with fewer interruptions and a better overall cycle time for repetitive milling tasks. Reliable chip control for cleaner machining A key benefit of the round geometry and A57 chipbreaker is superior chip control, which minimises rework and enhances operator safety. The insert’s shape promotes consistent chip formation and evacuation, especially under interrupted cuts. For workshops seeking lower manual clearing and reduced secondary handling, this specification supports cleaner processes and fewer machining interruptions. Robust design that suits abrasive cast iron work The circular insert format with a 12 mm nominal size and 4 mm thickness provides a balanced contact area and edge stability. The combination of geometry and the coated cemented carbide grade addresses the abrasive wear behaviour of cast iron, enabling stable cutting forces and improved surface quality on workpieces. Tolerance class H ensures consistent fit and interchangeability across compatible toolholders. Practical explanation for process planners For those new to grade classifications: WKK25G is a coated carbide grade optimised for cast iron machining, focusing on abrasion resistance rather than ductile-material toughness. The coating reduces adhesive wear and extends life in high-abrasion contexts, while the round insert geometry distributes cutting stresses, lowering the risk of premature edge failure. Matching the insert to appropriate speeds and feeds for cast iron will unlock these benefits. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools ROHX1204M08-A57 WKK25G inserts — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: ROHX1204M08-A57-WKK25G-WALTER Name: ROHX1204M08-A57 WKK25G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling insert) Series: Tiger·tec Gold Grade: WKK25G Facts Insert diameter: 12 mm Thickness: 4 mm Chipbreaker: A57 Shape: Round Tolerance class: H Special features Coating technology: Tiger·tec Gold Material suitability: Cast iron (K) Execution: X Plate designation: ROHX1204M08-A57 ISO designation: ROHX1204M08-A57 WKK25G FAQ What materials is this insert intended for? The ROHX1204M08-A57 WKK25G is optimised for machining cast iron, as indicated by the grade and series. What is the main benefit of the Tiger·tec Gold coating? Tiger·tec Gold on the WKK25G grade primarily increases wear resistance and improves life during abrasive cast iron cutting. Which chipbreaker is fitted and what is the advantage? The insert features an A57 chipbreaker, offering controlled chip formation and improved evacuation during interrupted and continuous milling. What are the key dimensions to consider for toolholder compatibility? Key dimensions are a 12 mm insert diameter and a 4 mm thickness; tolerant class H ensures consistent fitting in compatible toolholders. Who manufactures the insert and what is the product type? This milling insert is a Walter Tools fräswendeschneidplatte (milling insert), supplied under the ROHX1204M08-A57 WKK25G designation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com