ROHX1204M08-A57 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coated carbide, the WKP35G grade and the A57 chipbreaker delivers reliable chip control and extended tool life for demanding milling of steel and cast iron; order the Fräswendeschneidplatte ROHX1204M08-A57 WKP35G directly via Metav Werkzeuge or ask our consultants if needed. Fräswendeschneidplatte ROHX1204M08-A57 WKP35G – milling insert for steel and cast iron by Walter Tools ROHX1204M08-A57 WKP35G is a round milling insert engineered for consistent chip formation and robust performance in steel and cast-iron applications Tiger·tec Gold coating technology Optimised for steel and cast iron Round insert, 12 mm diameter A57 chipbreaker for controlled chips Higher productivity through a proven coating and grade The Tiger·tec Gold coating combined with the WKP35G grade provides a balance of wear resistance and toughness that benefits machining cycles. Designed for the ISO material groups P (steel) and K (cast iron), the insert reduces edge wear under typical heat and chip-formation conditions, which translates into fewer tool changes and steadier cycle times. The round geometry contributes to stability at the cutting edge, while tolerance class H ensures consistent seat fit and repeatable positioning in indexable holders. Such predictable behaviour supports improved process reliability and measurable productivity gains on medium- to heavy-duty milling tasks. Better chip control and surface outcomes with the A57 chipbreaker The integrated A57 chipbreaker promotes short, controllable chips when machining both steel and cast iron, lowering the risk of recutting and improving swarf evacuation. Controlled chip formation reduces the load on the machine and fixture, enabling higher effective machining parameters without compromising component integrity. When paired with the coated carbide substrate, the chipbreaker aids in achieving a consistent surface finish and reduces downtime for manual swarf handling, contributing directly to operational efficiency and safer shop-floor conditions. Practical benefits for shop-floor implementation and variety of applications The round insert format and a compact size of 12 mm with a 04 thickness accommodate a range of pocketing and peripheral milling holders commonly used in industry. The construction supports robust engagement with both unalloyed and alloyed steels as well as abrasive cast-iron grades, making it useful across production batches where material mixes occur. The specification emphasises predictable performance under varied cutting regimes, enabling process planners to standardise on an insert that delivers repeatable results without extensive parameter experimentation. For application advice, specification matching or to reserve stock of Walter Tools Tiger·tec Gold inserts contact Metav Werkzeuge by e‑mail or phone for expert guidance and order support. Technical Data SKU: ROHX1204M08-A57-WKP35G-WALTER Article designation: ROHX1204M08-A57 WKP35G Series: Tiger·tec Gold Grade: WKP35G Execution: X Facts Insert form: Round Size: 12 mm Thickness: 04 Chipbreaker: A57 Tolerance class: H Special features Coating: Tiger·tec Gold Substrate / material: coated carbide Application groups: steel (P) and cast iron (K) Stable chip formation Designed for indexable milling use FAQ What materials is this insert suitable for? The ROHX1204M08-A57 WKP35G insert is specified for steel (ISO group P) and cast iron (ISO group K), using the WKP35G coated-carbide grade and Tiger·tec Gold characteristics for balanced wear resistance and toughness. How does the A57 chipbreaker affect machining? The A57 chipbreaker provides controlled, short chips to improve swarf management and reduce recutting; in combination with the Tiger·tec Gold coating it supports stable cutting and consistent surface finishes. Is the insert compatible with standard round-pocket holders? Yes, the round form and 12 mm diameter suit holders designed for round indexable inserts; tolerance class H ensures a precise fit for repeatable indexing. What performance advantages does the WKP35G grade offer? WKP35G is a coated-carbide grade optimised for a wide range of steel and cast-iron operations, delivering a compromise of wear resistance and edge robustness that supports longer tool life and process reliability. Can this insert be used for finishing and roughing operations? The insert’s chip control and coated-carbide substrate make it suitable for both stable finishing passes and productive roughing, depending on machine capability and machining parameters. Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. The mentioned brand is cited solely for explanatory purposes; no affiliation with our company is implied. Original factory-new products of the manufacturer are supplied.
ROHX1204M0T-A27 WKP35G Wendeplatten - Walter Tools
Take advantage of a high-performance combination of Tiger·tec Gold coating and the WKP35G carbide grade for consistent wear resistance and chip control in demanding milling operations; order directly via Metav Werkzeuge or request application advice from their consultants. ROHX1204M0T-A27 WKP35G milling indexable insert — Tiger·tec Gold coated, for steel and cast iron | Walter Tools The ROHX1204M0T-A27 WKP35G is a round milling insert engineered for productive, stable machining of steel and cast iron, offering an optimised chip geometry for secure chip control in continuous and interrupted cuts. Tiger·tec Gold coated carbide grade WKP35G Optimised A27 chipbreaker for secure chip control Round 12 mm form with H tolerance for stability Suitable for steel (P) and cast iron (K) Improved productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade provides a reliable balance between wear resistance and toughness, which helps to extend tool life under typical milling conditions. This insert’s coating reduces flank and crater wear while maintaining a robust cutting edge; the result is fewer tool changes and more consistent production cycles. Engineers looking for predictable performance in batch or continuous operations will recognise the practical benefit of a coated carbide grade designed for broad applicability. Consistent chip control and secure cutting geometry The A27 chipbreaker on this indexable insert is designed to produce controlled chips when machining steel and cast iron in accordance with ISO 513 groups P and K. Controlled chips reduce the risk of surface damage and improve evacuation from the cutting zone, contributing to repeatable surface finish and fewer stoppages. The round form, combined with the insert’s H tolerance, enhances clamping stability and reduces vibration, which is particularly advantageous when milling with interrupted cuts or varying engagement. Geometry and size tailored for stability and repeatability With a 12 mm diameter and a 4 mm thickness, the insert offers a compact geometry that supports rigid toolholder arrangements and reliable seat location. The round plate form spreads cutting forces evenly, lowering the tendency for localised edge chipping and ensuring repeatable dimensional results. Specified execution and ISO designation allow straightforward identification in tool management systems, simplifying inventory control and reducing set-up time on the shop floor. Application versatility and production-ready reliability Designed for machining Stahl (steel) and Guss (cast iron) applications, the insert suits a wide range of component types and production scenarios, from finishing to more aggressive roughing passes depending on cutting conditions and toolholder rigidity. The Tiger·tec Gold technology supports a broad material coverage and contributes to process security in industrial environments. Walter Tools’ series reputation underlines the insert’s suitability for professional workshop and production use. Contact Metav Werkzeuge for tailored tooling advice and to arrange procurement of the ROHX1204M0T-A27 WKP35G insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ROHX1204M0T-A27-WKP35G-WALTER Label: Fräswendeschneidplatte ROHX1204M0T-A27 WKP35G Walter Tools Manufacturer: Walter Tools Core data Diameter: 12 mm Thickness: 4 mm Tolerance class: H Form: round Chipbreaker: A27 Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Material applicability: P / K (steel, cast iron) ISO designation: ROHX1204M0T-A27 WKP35G Execution: X FAQ Which materials are recommended for this insert? The ROHX1204M0T-A27 WKP35G insert from Walter Tools is specified for ISO groups P and K, making it suitable for machining steel and cast iron. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this grade enhances wear resistance and edge stability, which helps to extend cutting life and maintain consistent machining performance. What is the purpose of the A27 chipbreaker? The A27 chipbreaker is designed to produce stable, controlled chips during milling, improving chip evacuation and reducing the risk of surface damage in both continuous and interrupted cuts. Is the round insert form advantageous for vibration control? Yes, the round form distributes cutting forces across the insert edge, improving clamping stability and lowering the tendency for local edge chipping, which supports repeatable results. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ROHX1204M0T-A27 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, reliable chip control and consistent tolerance for efficient production; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations ROHX1204M0T-A27 WKP35S — Milling insert Tiger·tec Silver for steel & cast iron (Walter Tools) The ROHX1204M0T-A27 WKP35S is a round milling indexable insert designed for productive machining of steel and cast iron, offering a coated carbide grade and optimised chip formation for stable cutting performance Tiger·tec Silver coating for stable cutting Suited to steel and cast iron (ISO P, K) Round insert, 12 mm diameter with A27 chipbreaker Tolerance class H for consistent tool performance Consistent cutting performance for steel and cast iron The Tiger·tec Silver-coated indexable insert delivers a balance of wear resistance and thermal stability that supports longer tool life and steady surface quality when machining ISO P (steel) and ISO K (cast iron). The WKP35S grade is a coated carbide designed to handle the heat and abrasive conditions typical of these material groups; the coating reduces flank wear and helps maintain the cutting edge. For production environments this means fewer tool changes and more predictable cycle times, which contributes directly to higher throughput and lower unit costs. The coating and carbide pairing also improve performance when chips tend to break unpredictably, so chip control remains reliable across varying cutting conditions. Geometry and chip control that simplify process setup The round geometry and the A27 chipbreaker are engineered to promote stable chip formation and easy engagement on a range of milling toolholders. The insert’s size code (12) and thickness code (04) provide a compact, robust seating in the pocket, while tolerance class H supports repeatable clamping and concentricity. These design choices reduce the time spent fine-tuning tool offsets and feed rates on the shopfloor. Explaining briefly for those less familiar: the chipbreaker shapes and guides the metal swarf away from the cutting zone, lowering the risk of re-cutting and improving surface finish without complex parameter changes. Integration into productive tooling systems As a component of the Tiger·tec Silver series from Walter Tools, the insert is suitable for catalogue- and geometry-dependent applications where reliable repeatability is essential. The combination of coated carbide and stable edge geometry helps achieve consistent results across batch production and single-setup machining. For process planners this equates to improved process security and the potential for increased spindle utilisation. If the machining task requires adaptation—for example, different depths of cut or feed strategies—the insert’s robust characteristics allow a wider process window before wear affects part quality, helping to keep maintenance predictable and production schedules on track. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss the ROHX1204M0T-A27 WKP35S for the intended application—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ROHX1204M0T-A27-WKP35S-WALTER Article designation: ROHX1204M0T-A27 WKP35S Manufacturer: Walter Tools Product type: Milling insert Facts Plate size: 12 Thickness code: 04 Tolerance class: H Special features Series / coating: Tiger·tec Silver Grade: WKP35S Material suitability: Steel (ISO P), Cast iron (ISO K) Shape: Round Chipbreaker: A27 Material code: P / K FAQ What materials is this insert suitable for? The ROHX1204M0T-A27 WKP35S is designed for machining steel (ISO P) and cast iron (ISO K) thanks to the WKP35S coated carbide grade and Tiger·tec Silver coating. How does the A27 chipbreaker affect machining? The A27 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing recutting risks when the ROHX1204M0T-A27 WKP35S is used in appropriate milling conditions. Is the insert compatible with high-production milling systems? Yes, the combination of the coated carbide grade and tolerance class H supports repeatable clamping and reliable performance in productive milling operations using standard indexable-toolholder systems. What benefits does Tiger·tec Silver provide compared with uncoated grades? Tiger·tec Silver enhances wear resistance and thermal stability, which typically results in longer tool life and steadier component quality for the ROHX1204M0T-A27 WKP35S in steel and cast iron applications. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
ROHX1204M0T-A27 WPP35G Wendeplatten - Walter Tools
Take advantage of a high-performance, cost-effective cutting solution that combines the Tiger·tec Gold coating with a carbide grade optimised for steel machining. The robust WPP35G grade delivers extended tool life and consistent chip control, helping to reduce downtime and tool-change frequency. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. ROHX1204M0T-A27 WPP35G milling indexable insert — Tiger·tec Gold, for steel, Walter Tools The ROHX1204M0T-A27 WPP35G is a round milling insert designed for reliable steel machining, featuring the Tiger·tec Gold coating and an A27 chipbreaker for consistent performance in a wide range of production setups. Tiger·tec Gold coating for extended tool life Geometry A27 chipbreaker for reliable chip control Round 12 mm insert for versatile milling applications Optimised for machining steel with high process security Longer tool life through modern coating technology The combination of a coated carbide grade and the Tiger·tec Gold technology produces a measurable increase in durability and wear resistance. The coated hardmetal layer reduces flank wear and improves heat resistance during interrupted cuts, which translates into fewer tool changes and more productive machining cycles. This advantage is particularly relevant for shops processing unalloyed and alloyed steels, where thermal loads and serrated chip formation are common challenges. The result is a more predictable process and lower overall tooling costs. Consistent chip management and improved surface quality The insert’s A27 chipbreaker geometry is engineered to control chip flow in typical steel applications, reducing the risk of recutting and damage to the workpiece. As a round insert, it provides multiple cutting edges and a neutral cutting action that supports stable cutting forces and surface finish consistency. For production environments aiming for repeatable part quality, this configuration reduces rework and maintains tighter tolerances across lots, supporting reliable throughput on standard milling operations. Stable seating and predictable handling for shop-floor efficiency With tolerance class H, the insert seats precisely in common toolholders, ensuring consistent clamping and repeatable positioning. The design balances edge robustness and economy: the WPP35G grade targets a mid-to-high toughness range suitable for a broad spectrum of steel alloys. This balance means fewer unexpected insert failures and more consistent tool-life forecasts, which simplifies inventory management and supports leaner production planning. Compact dimensions and straightforward machine integration The round form with a 12 mm diameter and 4 mm plate thickness fits many indexable milling systems and secures multiple effective cutting edges per part, improving cost per edge. The neutral form and standard mounting make retrofitting or upgrading existing tool assemblies straightforward, while the insert’s build quality and coating technology support higher cutting speeds where machine capability allows. This makes integration seamless for shops seeking both immediate performance gains and long-term process stability. For tailored application advice or to secure Walter Tools Tiger·tec Gold inserts for reliable steel machining, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and rapid supply. Technical data Article number: ROHX1204M0T-A27-WPP35G-WALTER Designation: ROHX1204M0T-A27 WPP35G Type: Milling indexable insert Facts Diameter: 12 mm Thickness: 4 mm Chipbreaker: A27 Tolerance class: H Special features Grade: WPP35G Coating: Tiger·tec Gold Material application: Steel (ISO group P) Plate form: Round Series: Tiger-tec Gold FAQ What materials is this insert suitable for? The ROHX1204M0T-A27 WPP35G is optimised for machining steel (ISO group P) and is tailored to handle the typical heat and chip characteristics encountered when cutting unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP35G grade increases wear resistance and thermal stability, which extends tool life and improves process reliability during continuous and interrupted milling operations. What does the A27 chipbreaker do? The A27 chipbreaker is designed to control chip formation and evacuation in steel machining, promoting stable cutting conditions and a consistent surface finish while reducing the risk of chip-related interruptions. Is this insert compatible with standard toolholders? The round form and the stated dimensions are intended for common indexable milling systems; tolerance class H ensures a precise fit for repeatable seating and accurate edge positioning. Can this insert be used at higher cutting speeds? The combination of coated carbide and the Tiger·tec Gold technology supports increased cutting speeds where machine and process parameters permit, helping to raise productivity without compromising tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and trademarks are mentioned for descriptive purposes only and do not indicate any affiliation with or endorsement by the trademark owners. The offered article is an original, brand-new product from the manufacturer.
ROHX1605M0-D57 WKP35S WKP35S Wendeplatten - Walter Tools
Die Kombination aus der robusten Tiger·tec Silver-Beschichtung, der für P (Stahl) und K (Gusseisen) ausgelegten Sortencharakteristik WKP35S sowie der runden Plattenform sorgt für konstante Zerspanungsleistung und lange Standzeiten. Bestellen Sie die Wendeschneidplatte direkt über Metav Werkzeuge oder kontaktieren Sie die technischen Berater für eine prüfbare Anwendungsempfehlung. ROHX1605M0-D57 WKP35S milling insert for Stahl and cast iron by Walter Tools — Tiger·tec Silver, round 16 mm A ROHX1605M0-D57 WKP35S indexable milling insert engineered for demanding roughing and general-purpose finishing in Stahl and Gusseisen, offering reliable wear resistance and controlled chip formation. Tiger·tec Silver coating for long life Designed for P (Stahl) and K (Gusseisen) Round 16 mm insert with D57 chipbreaker Stable tolerance class H for consistent fits Increased productivity through advanced coating and grade The Tiger·tec Silver coating combined with the WKP35S grade provides improved thermal stability and abrasion resistance, which translates into longer tool life and fewer index changes during production. For operations with frequent heat generation, this combination reduces flank wear and keeps cutting performance consistent over extended cycles. The design supports a cost-effective machining strategy by lowering tool consumption and downtime. Reliable chip control for safer, faster machining The round insert geometry with D57 chipbreaker offers predictable chip segmentation and evacuation, reducing the risk of built-up edge and machine stoppages. Stable chip control contributes directly to surface quality and repeatability, especially in interrupted cuts or deep pocketing. The result is a measurable improvement in process reliability and reduced manual interventions during multi-shift production. Versatility in common ferrous materials and simple integration Prepared for the ISO P and K groups, this insert is intended for a wide range of applications in Stahl and Gusseisen, supporting both roughing and finishing operations depending on cutter geometry. The compact round form factor and tolerance class H enable straightforward integration into standard milling cutters without complex reconfiguration. This makes the insert suitable for shops seeking flexible, productive tooling solutions with quick change-outs. For application-specific recommendations or to secure supply, contact Metav Werkzeuge — assistance and technical consultation are available to ensure the insert matches the intended machining scenario Technical data SKU: ROHX1605M0-D57-WKP35S-WALTER Article: Fräswendeschneidplatte / milling insert Series: Tiger-tec Silver Grade: WKP35S Manufacturer: Walter Tools Type designation: ROHX1605M0-D57 WKP35S Core data Insert form: Round Plate size: 16 Plate thickness: 05 Chipbreaker: D57 Tolerance class: H Applicable material groups: P / K Special features Coating technology: Tiger·tec Silver Material composition: P / K suited grade Execution: X Typical applications: Steel and cast iron machining Series characteristics: Wear-resistant, stable chip formation FAQ Which materials is the insert suitable for? The insert is designed for use in the ISO P and K groups; it is suitable for Stahl (P) and Gusseisen (K) machining with the ROHX1605M0-D57 WKP35S grade offering balanced wear resistance. What does the D57 chipbreaker affect in operation? The D57 chipbreaker is optimised for consistent chip segmentation and evacuation, improving surface finish and reducing tool interruptions during milling. How does the Tiger·tec Silver series improve performance? Tiger·tec Silver enhances thermal stability and abrasion resistance, which leads to longer tool life and more consistent cutting performance under variable load conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX1605M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP35G grade for reliable steel machining and extended tool life. The combination of round geometry and a D57 chipbreaker delivers predictable chip control and process stability for series production. Order through Metav Werkzeuge or consult our specialists for material-specific cutting data. ROHX1605M0-D57 WPP35G indexable milling insert — round 16 mm, Tiger·tec Gold, Walter Tools ROHX1605M0-D57 WPP35G is a round indexable milling insert optimised for machining steel, combining a Tiger·tec Gold coating with a D57 chipbreaker for controlled chip formation and consistent component quality. Tiger·tec Gold coating for extended tool life WPP35G grade tuned for steel machining Round 16 mm insert with D57 chipbreaker Tolerance class H for stable dimensions Faster, more consistent steel milling with a coated grade The combination of a coated carbide grade and Tiger·tec Gold technology offers a measurable improvement in process stability when machining steels. The WPP35G composition is engineered for the heat and chip form typical of steel cutting, which reduces flank wear and helps maintain a stable cutting edge over longer tool lifetimes. This translates into fewer tool changes and less machine downtime, increasing overall throughput in batch and continuous production. Predictable chip control through round geometry and dedicated chipbreaker Round insert geometry paired with the D57 chipbreaker delivers reliable chip control across a wide range of cutting parameters. The rounded shape reduces vibration susceptibility and supports smoother engagement at varying depths of cut, while the chipbreaker channels material away from the cutting zone. The result is improved surface finishes and lower risk of recutting, which supports consistent component quality and reduces rework rates. Designed for shop-floor productivity and repeatability Tolerance class H and the precision of the insert design support reproducible mounting and indexing, which is essential for serial production. The round 16 mm format enables flexible toolholder choices and simple indexation, contributing to faster set-ups. With a focus on machining steel (P), the insert delivers a balanced mix of toughness and wear resistance, helping to achieve stable cutting conditions and dependable cycle times. Series benefits and material suitability Part of the Tiger·tec Gold series, the insert benefits from coating technology developed for broad process windows and improved edge strength. The WPP35G grade is classified for steel applications, emphasising a good mix of wear resistance and toughness for industrial environments. For manufacturers seeking consistent results across diverse steel alloys, this combination reduces the need for frequent grade changes and simplifies tooling decisions on the shop floor. For process engineers requiring dependable performance, specify the Walter Tools ROHX1605M0-D57 WPP35G via Metav Werkzeuge or contact our application consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting data and mounting recommendations Technical Data Article number: ROHX1605M0-D57-WPP35G-WALTER Article name: ROHX1605M0-D57 WPP35G Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger·tec Gold Grade: WPP35G Execution: X Facts Diameter: 16 mm Thickness designation: 05 Chipbreaker: D57 Tolerance class: H Special features Coating: Tiger·tec Gold Material group suitability: Steel (P) Shape: Round Insert designation without grade: ROHX1605M0-D57 Full ISO designation: ROHX1605M0-D57 WPP35G FAQ What materials is this insert suitable for? The ROHX1605M0-D57 WPP35G is designed for machining steel (P) and is optimised for typical steel heat generation and chip formation. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP35G grade increases wear resistance and edge stability, which extends effective tool life and supports consistent machining results. Can this round insert improve surface finish and reduce vibration? Yes; the round geometry combined with the D57 chipbreaker promotes smoother engagement and predictable chip evacuation, which helps to improve surface finish and reduce vibration in many milling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (market appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The item offered is an original, brand-new product from the manufacturer.
ROHX1605M0-D57 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the D57 chipbreaker for stable edge life and reliable chip control across demanding materials; this combination supports high productivity and consistent surface finish in milling operations. Order directly via Metav Werkzeuge or consult our product specialists for application-specific recommendations and stock information. ROHX1605M0-D57 WSP45G milling indexable insert — Tiger·tec Gold PVD, versatile P/M/S performance (Walter Tools) The ROHX1605M0-D57 WSP45G is a round milling indexable insert engineered for productive face and shoulder milling across a wide material range, delivering consistent edge stability and efficient chip formation. Tiger·tec Gold PVD coating for long tool life Suitable for steel, stainless and superalloys Round 16 mm insert with D57 chipbreaker Predictable performance from advanced coating and substrate The core advantage of the insert lies in the Tiger·tec Gold surface treatment combined with a coated carbide substrate. This PVD coating improves thermal resistance and reduces abrasive wear, which leads to longer tool life and fewer unplanned tool changes. For production environments this translates into measurable process stability: fewer interruptions and a more constant part quality. The technology is particularly beneficial where consistent cutting conditions are required over extended tool runs. Reliable material versatility for mixed-production shops Designed for P, M and S groups, the insert supports machining of unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. The grade WSP45G is formulated for tougher cutting conditions: it resists edge breakdown and promotes secure chip formation where heat generation or material toughness would otherwise challenge the cutting edge. This versatility reduces the need for frequent tool changes in mixed-material batches and supports leaner tooling inventories. Geometry and chip control that aid surface quality The round 16 mm plate geometry and D57 chipbreaker deliver smooth entry and stable cutting forces, which contribute to improved surface finishes and dimensional consistency. The compact thickness and round form allow light interrupted cuts and robust radial engagement, making the insert suitable for a range of milling strategies. In practice, the geometry minimises vibration and supports a stable cutting edge, which is crucial when achieving tight tolerances and repeatable results. Integration into productive machining routines With a tolerance class H and execution X, the insert fits established ISO toolholders and milling systems for streamlined tool management. The combination of edge stability and reliable chip control supports higher feeds and optimised cutting data, helping to increase throughput without sacrificing part quality. For process engineers, the predictable behaviour of the grade allows easier process parameter standardisation and quicker ramp-up when changing batches or series. For application advice, availability checks or tailored recommendations on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ROHX1605M0-D57-WSP45G-WALTER Designation: ROHX1605M0-D57 WSP45G Series: Tiger·tec Gold Sort: WSP45G Core specifications Insert form: Round Plate size: 16 Plate thickness: 05 Chipbreaker: D57 Tolerance class: H Design & features Coating: Tiger·tec Gold (PVD) Grade composition: coated carbide Material suitability: P / M / S Execution: X FAQ What materials is this insert suitable for? The ROHX1605M0-D57 WSP45G insert is suitable for P, M and S groups; it machines Stahl, stainless steels and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on the insert improves wear resistance and thermal stability, extending tool life and supporting consistent part quality in high-load milling tasks. What is the function of the D57 chipbreaker? The D57 chipbreaker provides reliable chip control and reduced cutting forces, which helps maintain surface finish and dimensional accuracy during face and shoulder milling. Is this insert compatible with standard round insert toolholders? Yes, the round form and ISO designation are intended for use in compatible round insert holders; tolerance class H ensures reproducible seating and stable engagement. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new merchandise of the manufacturer, including Walter Tools.
ROHX1605M0-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and D67 chipbreaker for consistent chip control and extended tool life; combine these strengths with the round Ø16 geometry for productive milling. Order the ROHX1605M0-D67 WSP45G insert directly via Metav Werkzeuge or contact our consultants for application advice. ROHX1605M0-D67 WSP45G milling indexable insert (Tiger·tec Gold, D67 chipbreaker) — Walter Tools ROHX1605M0-D67 WSP45G is a round milling indexable insert designed for robust general-purpose milling, optimised for a wide range of steels and heat-resistant alloys. Tiger·tec Gold PVD coating for wear resistance Suitable for Stahl, rostfreier Stahl and Titan Round Ø16 insert with D67 chipbreaker Stable cutting edge, tolerance class H Longer tool life through advanced coating and edge stability The combination of a PVD-coated Tiger·tec Gold grade and a reinforced cutting edge provides measurable improvements in tool life and process reliability. The WSP45G grade is formulated as a tough, versatile coated carbide that reduces flank and crater wear under typical milling loads. This results in fewer indexings and longer uninterrupted machining cycles, which supports higher productivity in batch and job-shop environments. The improved wear resistance also contributes to consistent dimensional stability over a production run. Reliable chip control and secure cutting performance The D67 chipbreaker geometry on the round Ø16 insert delivers controlled chip formation across a broad range of chip loads. Round inserts inherently offer smoother engagement and reduced vibration in interrupted cuts; combined with a dedicated chipbreaker, this leads to predictable chip flow and lower risk of chip entanglement. For applications requiring stable cut behaviour and repeatable surface integrity, the D67 form assists in maintaining cutting-edge integrity and reducing built-up edge formation. Broad material scope and application clarity This insert supports machining in the ISO material groups P, M and S: P denotes Stahl (unalloyed and alloyed steels), M denotes rostfreier Stahl (stainless steels) and S covers heat-resistant superalloys and Titan. The grade’s toughness and thermal resistance make it suitable where heat dissipation is limited and the cutting edge faces severe mechanical and thermal loads. Typical use cases include general-purpose face milling, shoulder milling and light to medium-duty contouring where a balance between wear resistance and edge stability is required. Practical benefits for the workshop Using the ROHX1605M0-D67 WSP45G insert reduces downtime through extended index life and eases process setup with its consistent performance. The round insert form provides increased flexibility in approach angles and is forgiving in varied entry conditions. For operations aiming to increase throughput while keeping tool inventory manageable, this insert offers a straightforward, versatile option that aligns with standard milling strategies and setup practices. For tailored recommendations on Walter Tools Tiger·tec Gold inserts and to arrange prompt delivery, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our team will advise on the best setup for specific materials and applications. Technical Data Article number: ROHX1605M0-D67-WSP45G-WALTER Label: Fräswendeschneidplatte ROHX1605M0-D67 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Facts Insert size: Ø16 Thickness: 05 Tolerance class: H Chipbreaker: D67 Special features Grade: WSP45G Series: Tiger·tec Gold Coating: PVD (Tiger·tec Gold) Insert form: Round Material group suitability: P / M / S Execution: X FAQ What materials can be machined with this insert? The ROHX1605M0-D67 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan, corresponding to ISO groups P, M and S. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and thermal stability, which extends cutting-edge life and improves process reliability during milling. Which chip control can be expected from the D67 chipbreaker? The D67 chipbreaker provides stable chip formation and evacuation for a variety of cutting conditions, reducing the risk of chip-related interruptions and aiding consistent surface finish. Is this insert suitable for interrupted cuts and shoulder milling? Yes — the round geometry combined with a tough coated grade offers good resistance to edge fracture and performs well in interrupted cuts and shoulder milling operations. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ROHX1605M08-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of a dedicated WHH15X coated carbide grade and the A57 chipbreaker geometry for consistent chip control and longer tool life; the round 16 insert with tolerance class H supports reliable, repeatable milling results. Order the ROHX1605M08-A57 WHH15X milling indexable insert directly via Metav Werkzeuge or ask the consultants for tailored advice. ROHX1605M08-A57 WHH15X milling indexable insert by Walter Tools — round 16 mm, A57 chipbreaker The ROHX1605M08-A57 WHH15X is a round milling indexable insert designed for medium-range finishing and general-purpose slotting and face milling in a wide range of materials. WHH15X coated carbide grade for versatility Round 16 mm geometry for radial flexibility A57 chipbreaker for controlled chip formation Consistent chip control for stable processes The combination of the A57 chipbreaker and the WHH15X coated carbide provides controlled chip formation, which reduces fluctuations in cutting forces and helps maintain a steady process. For shops seeking predictable cycle times, the insert’s geometry promotes favourable chip flow and lowers the risk of built-up edge, translating into more consistent surface finish and fewer interruptions for chip clearance. This consistency supports higher machine utilisation and improved throughput. Compact round geometry enabling flexible milling strategies A round 16 mm insert offers multi-directional cutting with an extended effective cutting edge, which benefits applications that require versatile entry angles and radial engagement. The circular shape allows for varied cutting orientations without frequent index changes, so machining strategies can favour longer tool life and reduced setup complexity. In practice, this means fewer tool changes and smoother transitions between roughing and finishing passes. Coated grade engineered for repeatable performance The WHH15X grade is a coated carbide designed to balance wear resistance and toughness across a broad application spectrum. The coating enhances oxidation resistance and supports higher cutting speeds where appropriate, while the substrate retains toughness to withstand interrupted cuts. The result is reliable cutting edge stability, which reduces rework and supports process repeatability in daily production. Clear tolerance and execution for predictable fitting With tolerance class H and execution code X, the insert matches common clamping and pocket systems with predictable seating and runout behaviour. The standardised dimensions and designation simplify tool inventory management and ensure consistent fitment in compatible toolholders. For procurement and process planning, the specification offers transparency that aids in fixture selection and quality control. For procurement of the WHH15X-grade ROHX1605M08-A57 insert and technical ordering advice, contact Metav Werkzeuge for availability and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ROHX1605M08-A57-WHH15X-WALTER Article: ROHX1605M08-A57 WHH15X Product type: milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Insert form: round Insert size: 16 Thickness code: 05 Chipbreaker: A57 Tolerance class: H Execution: X Special features Grade: WHH15X (coated carbide) Material designation: catalogue-dependent Iso designation: ROHX1605M08-A57 WHH15X Label: Fräswendeschneidplatte ROHX1605M08-A57 WHH15X Walter Tools FAQ What applications suit this round insert best? The ROHX1605M08-A57 WHH15X insert is suitable for medium finishing and general-purpose milling, offering flexibility for slotting and face milling where controlled chip formation is required. How does the A57 chipbreaker improve machining? The A57 chipbreaker on this insert promotes consistent chip evacuation and reduced built-up edge, which improves surface finish and supports stable cutting conditions. Is the WHH15X grade suitable for a wide range of materials? The WHH15X coated carbide is designed for broad applicability; material suitability should be verified against the product matrix and specific machining conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. The mention of brand names such as Walter Tools is for explanatory purposes only and does not indicate any affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
ROHX1605M08-A57 WKK25G Wendeplatten - Walter Tools
Combining the WKK25G coated grade with the Tiger‑tec Gold technology ensures high wear resistance and consistent performance when machining cast iron, while the chipbreaker A57 and round geometry promote controlled chip formation and steady cycle times — order directly via Metav Werkzeuge or consult its specialists for application advice. ROHX1605M08-A57 WKK25G milling insert – Tiger‑tec Gold for cast iron by Walter Tools The ROHX1605M08-A57 WKK25G is an indexable milling insert engineered for productive machining of cast iron, offering a coated carbide grade and a round form for stable cutting in interrupted and continuous cuts. Tiger‑tec Gold coating for extended tool life Optimised for cast iron applications Round insert, 16 mm diameter design Chipbreaker A57 for controlled chip formation Consistent performance for cast iron machining The combination of the WKK25G grade and Tiger‑tec Gold coating targets the abrasive wear profile typical of cast iron, delivering high wear resistance and repeatable edge stability. This means fewer tool changes and less unplanned downtime in production. The coated carbide structure is designed to tolerate short, brittle chips without premature edge breakage, so the cutting edge retains its geometry longer and provides consistent dimensional output. For shops shifting between different cast iron qualities, the insert’s formulation offers a reliable compromise between toughness and hardness, improving process security on series operations. Controlled chips and reliable cycle time The insert’s chipbreaker A57 and round geometry support predictable chip flow and evacuation, which reduces the risk of chip entanglement and improves surface integrity. With a measured design focus on chip control and heat management, the insert helps maintain stable cutting forces and enables higher feed rates where machine and toolholding permit. The specification of 16 mm size and the defined thickness code ensure the insert seats securely in compatible holders, providing consistent contact and repeatable indexation for multi‑edge use — a practical route to lower cost per component in serial machining. Industrial confidence and application guidance Produced by a recognised brand, this indexable milling insert is suited for short‑chipping materials and applications that demand steady removal rates in cast iron components. The round form lends itself to entry‑exit robustness and interrupted cuts, while the coated grade balances productivity with edge life. For process integration, engineers will appreciate the clear designation and series affiliation, which simplifies grade selection and tool lifecycle planning. Operational reliability and reduced scrap rates contribute to overall production efficiency, supporting predictable throughput and cost control. Contact Metav Werkzeuge for application advice or to confirm availability; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ROHX1605M08-A57-WKK25G-WALTER Designation: ROHX1605M08-A57 WKK25G Manufacturer: Walter Tools Core specifications Insert size: 16 Thickness code: 05 Chipbreaker: A57 Tolerance class: H Materials & features Grade: WKK25G (coated carbide) Suitable for: cast iron Shape: round insert Series: Tiger‑tec Gold FAQ What material is this insert optimised for? The ROHX1605M08-A57 WKK25G milling insert is optimised for machining cast iron, with the grade and coating tailored to abrasive wear and short, brittle chips. How does the chipbreaker A57 affect machining? Chipbreaker A57 on the ROHX1605M08-A57 promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of chip jams in cast iron operations. Is this insert suitable for interrupted cuts? Yes, the round insert geometry and the coated grade provide robustness in entry and exit phases, making the insert suitable for interrupted cutting conditions typical in milling cast iron components. Which series does the grade belong to and what is the benefit? The WKK25G grade is part of the Tiger‑tec Gold series; this coating technology offers enhanced tool life and process stability across a broad range of cast iron applications. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademark and brand names mentioned are the property of their respective owners and are used for explanatory purposes only. There is no connection between our company and the mentioned brands beyond the sale of original, factory‑new products from the manufacturer.
ROHX1605M08-A57 WKP35G Wkp35g Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the WKP35G grade to achieve extended tool life and consistent chip control; order the ROHX1605M08-A57 WKP35G insert via Metav Werkzeuge or consult their advisors for application-specific guidance. ROHX1605M08-A57 WKP35G milling insert — Tiger·tec Gold, for steel & cast iron | Walter Tools ROHX1605M08-A57 WKP35G is a round milling insert engineered for high-productivity machining of steel and cast iron with a robust coated-carbide grade Tiger·tec Gold coating for extended tool life WKP35G grade for steel and cast iron Round insert, 16 mm diameter Coated carbide for reliable chip control Maximise uptime through coating and grade synergy The combination of the Tiger·tec Gold coating and the WKP35G grade provides a measurable improvement in process stability. The multi-layer coating reduces abrasive wear and helps maintain a stable cutting edge, which in practice means longer periods between indexings and fewer unplanned tool changes. For operations focused on productivity, this translates into a more consistent cycle time and reduced process variability. The insert’s design supports reliable chip formation, reducing the risk of clogging and enabling smoother material evacuation in both roughing and medium finishing. Designed for demanding steel and cast-iron applications This insert is optimised for the ISO material groups P (steel) and K (cast iron), making it suitable where thermal load and abrasive wear are typical concerns. The grade is a coated carbide developed to balance flank wear resistance with fracture toughness, so it handles the short, breaking chips of cast iron as well as the continuous chips of many steels. When used in an appropriate cutter body, the geometry and chipbreaker A57 promote controlled chip segmentation, which enhances surface quality and reduces secondary operations. For shops aiming for repeatable performance, the geometry delivers predictable results across batches. Practical integration and machining benefits The round insert form and the specified dimensions make it compatible with a broad range of cutter bodies designed for indexable tooling. The combination of coating technology and grade aims to reduce tooling costs per component by extending tool life and improving edge stability. In addition to economic benefits, the insert supports process safety: consistent edge condition lowers scrap rates and reduces the need for manual rework. When selecting feeds and speeds, rely on the cutter body manufacturer’s recommendations and incorporate the substrate and casting condition; the insert’s construction allows for secure performance in interrupted cuts and common shop environments. Discuss application needs with Metav Werkzeuge and secure the Walter Tools ROHX1605M08-A57 WKP35G Tiger·tec Gold milling insert for extended tool life and consistent chip control Technical data Article number: ROHX1605M08-A57-WKP35G-WALTER Product name: ROHX1605M08-A57 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Insert diameter: 16 mm Thickness: 0.5 mm Tolerance class: H Breaker type: A57 Form: Round Special features Grade: WKP35G Coating technology: Tiger·tec Gold (multi-layer) Material: coated carbide Suitable for: Steel (P) and Cast iron (K) Execution: X FAQ Is this insert suitable for stainless steel? No. The ROHX1605M08-A57 WKP35G milling insert is specified for ISO groups P (steel) and K (cast iron); stainless steel suitability is not indicated for this grade. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP35G grade reduces abrasive wear and improves edge stability, which extends the tool life of the ROHX1605M08-A57 WKP35G insert and helps maintain consistent surface quality during production. Which materials can be machined with this insert? This insert is intended for machining steel and cast iron (ISO groups P and K), delivering controlled chip formation and good wear resistance in these material families. What does the chipbreaker A57 mean in practice? Chipbreaker A57 is a geometry designed to promote reliable chip segmentation for a wide range of cutting conditions; with the ROHX1605M08-A57 WKP35G insert it supports safer chip evacuation and improved surface finish in typical steel and cast-iron operations. Is the insert compatible with standard cutter bodies for round inserts? Yes. The round form and the stated dimensions of the ROHX1605M08-A57 WKP35G make it compatible with cutter bodies designed for this insert form; confirm seat and clamping specifications with the toolholder manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer.
ROHX1605M0T-A27 WKP35G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WKP35G grade for steady productivity and reliable chip formation; order the insert via Metav Werkzeuge or request tailored cutting data from our specialists. ROHX1605M0T-A27 WKP35G milling indexable insert — Tiger·tec Gold, for steel (P) and cast iron (K) by Walter Tools ROHX1605M0T-A27 WKP35G is a round milling insert designed for versatile finishing and semi-finishing of steels and cast irons in industrial milling applications ROHX1605M0T-A27 WKP35G by Walter Tools Tiger·tec Gold coating for extended tool life A27 chipbreaker for consistent chip control Round format, size 16 for compact toolholders High productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade delivers enhanced wear resistance and heat protection, which translates into longer service intervals and stable cutting edge performance. In practical terms, this means fewer tool changes and more predictable machining cycles during batch production. The coated carbide composition is optimised for the thermal and abrasive conditions typical when machining P (steel) and K (cast iron) material groups, offering a balance between toughness and hardness that reduces flank wear and preserves geometry under higher cutting temperatures. Stable chip control and improved surface results The integrated A27 chipbreaker is engineered to promote controlled chip formation and evacuation in interrupted and continuous milling passes. For operations where chip shape and evacuation impact cycle time and finish quality, the chipbreaker minimises re-cutting and reduces the risk of workpiece damage. The round form of the indexable plate provides additional flexibility in toolholder selection and contributes to uniform wear distribution, supporting consistent surface integrity over longer tool lives. Practical guidance for shop-floor application Classified for applications in the P and K ISO groups, the insert performs well across a wide range of steels and cast irons; select feeds and speeds in line with workpiece hardness and cutter engagement for best outcomes. When replacing inserts, ensure the seat and clamping are clean and that the tolerance class H is respected to maintain geometrical accuracy. For process optimisation and cutting-data recommendations tailored to specific alloys and machine setups, Metav Werkzeuge can supply validated parameters that make setup faster and reduce trial cuts. Robustness, tolerance and handling advantages Manufactured to execution X with tolerance class H, the insert supports repeatable positioning and consistent results in serial production. The designation identifies a compact plate with a nominal size denotation of 16 and a plate thickness code 05, suitable for compact milling assemblies where rigidity and repeatability matter. Using high-quality indexable plates reduces inventory complexity and simplifies tool management while providing the machining reliability expected from a premium brand such as Walter Tools. For application-specific recommendations and to secure supply of Walter Tools ROHX1605M0T-A27 WKP35G inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our team will provide cutting data and procurement support. Technical Data Article number: ROHX1605M0T-A27-WKP35G-WALTER Product label: Fräswendeschneidplatte ROHX1605M0T-A27 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Size: 16 Thickness: 05 Chipbreaker: A27 Tolerance class: H Special features Grade: WKP35G Coating: Tiger·tec Gold Material groups: P / K Plate form: Round Execution: X FAQ Which materials is this insert suitable for? The ROHX1605M0T-A27 WKP35G insert is specified for ISO groups P (steel) and K (cast iron), making it suitable for a broad range of milling tasks in those material families. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on this insert increases thermal resistance and wear protection, which helps maintain edge integrity and extends service life under demanding cutting conditions. How does the A27 chipbreaker affect machining? The A27 chipbreaker improves chip control and evacuation, reducing the likelihood of re-cutting and helping to achieve stable surface finish and repeatable cycle times. Is the round form advantageous for certain toolholders? The round format allows flexible toolholder arrangements and promotes even wear distribution, which is beneficial for consistent performance across multiple index positions. Where can cutting data for this insert be obtained? Cutting parameters and process recommendations for the ROHX1605M0T-A27 WKP35G are available from Metav Werkzeuge and can be adapted to specific machines and workpiece alloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used here for identification and explanation only. The offered item is an original, brand-new product from the manufacturer.
ROHX1605M0T-A27 WKP35S WKP35S Wendeplatten - Walter Tools
Combining Tiger·tec Silver coating and the WKP35S grade delivers a dependable balance of wear resistance and broad material capability for continuous machining. Benefit from controlled chip formation via the A27 chipformer and the round geometry for versatile milling operations; order directly via Metav Werkzeuge or contact our consultants for cutting data and application advice. ROHX1605M0T-A27 WKP35S — Milling indexable insert, Tiger·tec Silver, round A27 — Walter Tools The ROHX1605M0T-A27 WKP35S is a round milling indexable insert for machining steel and cast iron, engineered with the A27 chipformer and Tiger·tec Silver technology for stable tool life and consistent surface quality. High wear resistance with Tiger·tec Silver Optimised chip control with A27 chipformer Suitable for steel and cast iron machining Round insert, size 16, tolerance class H Consistent edge life for predictable throughput The combination of the WKP35S carbide grade and Tiger·tec Silver coating provides enhanced wear resistance and thermal stability, reducing flank wear during interrupted cuts. For production environments where consistent cycle times matter, this translates to fewer indexings and predictable tool change intervals. The coated hardmetal technology is optimised for the heat and strain typical of machining steel, while maintaining abrasion resistance for cast iron, supporting continuous throughput without compromising surface finish. Controlled chip formation for safer, faster milling The A27 chipformer and the round geometry are engineered to produce short, manageable chips when machining a range of ferrous materials. Improved chip control reduces the risk of entanglement and minimises secondary operations for chip clearance, which supports higher feed rates and safer automated cells. Explaining briefly: P and K refer to ISO groups — P for steel types and K for cast iron — indicating the insert’s intended application fields and why the geometry and grade are matched to these materials. Practical handling and process integration benefits A round insert with a standard size designation simplifies toolholder selection and inventory management, while the H tolerance class ensures reproducible seating and repeatable clamping accuracy. The insert’s design supports stable cutting edges under mixed-production schedules, enabling reliable part-to-part quality. For users seeking quick setup, the series designation and grade provide clear guidance when selecting cutting parameters, and the geometry is compatible with common milling strategies for face, slot and shoulder operations. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts or request detailed cutting data and compatibility checks for specific materials and machines Technical data Article number: ROHX1605M0T-A27-WKP35S-WALTER Label: Fräswendeschneidplatte ROHX1605M0T-A27 WKP35S Walter Tools Facts Size: 16 Thickness: 05 Tolerance class: H Special features Series: Tiger·tec Silver Grade: WKP35S Geometry: round insert Chipformer: A27 Application groups: P / K (steel / cast iron) Execution: X FAQ What materials is this insert designed for? The ROHX1605M0T-A27 WKP35S by Walter Tools is specified for ISO groups P and K, meaning it is suitable for a wide range of steel grades and for cast iron applications. How does the Tiger·tec Silver series benefit production? Inserts from the Tiger·tec Silver series offer improved thermal resistance and wear control; the WKP35S grade in particular supports longer edge life and consistent surface quality in milling applications. What does the A27 chipformer do during milling? The A27 chipformer shapes chips into short, controllable fragments, reducing entanglement and promoting safer, higher-feed milling when working with steel and cast iron. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany
ROHX1605M0T-A27 WPP35G Wendeplatten - Walter Tools
Taking advantage of Tiger‑tec Gold technology and the WPP35G grade, this insert delivers extended tool life and stable chip control in steel machining; its round 16 mm form with A27 chipformer supports consistent process security. Order the ROHX1605M0T-A27 WPP35G milling insert directly via Metav Werkzeuge or ask the consultants for application support. ROHX1605M0T-A27 WPP35G – milling indexable insert, Tiger‑tec Gold, for steel (Walter Tools) ROHX1605M0T-A27 WPP35G is a round milling indexable insert designed for reliable steel machining applications, combining a coated carbide grade with a dedicated chipformer for repeatable cutting results *Tiger‑tec Gold coating for extended tool life *Optimised chipformer A27 for stable chip control *Round 16 mm geometry for versatile milling *Designed for steel machining, ISO group P Increased productivity through advanced coating and grade The combination of Tiger‑tec Gold coating and the WPP35G grade provides notable wear resistance and thermal stability during medium to demanding machining of steel (ISO group P). The coated carbide composition is engineered to tolerate the heat and strain typical of steel cutting, which translates into longer tool life and fewer index changes. For production environments this means reduced downtime and more predictable tool costs per component, supporting higher throughput without sacrificing surface quality. Consistent chip control reduces process interruptions The A27 chipformer and the round insert geometry work together to form short, controllable chips when machining steels. Stable chip formation lowers the risk of chip re-cutting and tool damage, which improves process security and reduces rejects. The insert’s design makes it suitable for a range of milling strategies where reliable evacuation of swarf is essential, resulting in smoother operation and less unplanned machine stoppage. Simple integration and repeatable performance in tool systems With a 16 mm diameter form and nominal 5 mm plate thickness, the insert fits common round-indexable toolholders and clamping systems, allowing quick replacement and easy stock management. The ROHX1605M0T-A27 WPP35G designation ensures clear identification for procurement and inventory control. Using a well-defined grade and series from Walter Tools supports consistent results across batches and operators, making planning and process validation more straightforward for engineering and production teams. For reliable machining performance with Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for application advice and supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: ROHX1605M0T-A27-WPP35G-WALTER Designation: ROHX1605M0T-A27 WPP35G Product: milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Execution: X Specifications Diameter: 16 mm Thickness: 5 mm Tolerance class: H Special features Coating: Tiger‑tec Gold (coated carbide) Chipformer: A27 Form: round Material application: steel (ISO group P) Plate series: Tiger‑tec Gold Plate size: 16 Plate thickness type: 05 FAQ What materials is this insert intended for? This insert is specified for steel machining (ISO group P); the WPP35G grade is optimised for the heat and chip behaviour typical of steel. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the ROHX1605M0T-A27 WPP35G reduces wear and improves thermal resistance, extending tool life and supporting higher cutting speeds. Which chip control can be expected with the A27 chipformer? The A27 chipformer provides controlled, short chips in steel machining, enhancing process security and reducing risk of chip-related interruptions. Is the insert compatible with standard round milling holders? The round 16 mm geometry and 5 mm thickness are compatible with common round-indexable toolholders that accept ROHX-type inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation or partnership between our company and the named brands. The offered item is an original, brand‑new product from the stated manufacturer.
ROHX2006M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and broad material coverage for more productive milling cycles; order directly via Metav Werkzeuge or consult our team for application advice. ROHX2006M0-D57 WSP45G milling indexable insert — Walter Tools, Tiger·tec Gold, round geometry with chipbreaker D57 ROHX2006M0-D57 WSP45G is a round milling insert designed for general milling tasks across a wide range of materials, offering robust edge life and predictable chip formation Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless steel and superalloys Round insert with chipbreaker D57 Stable cutting edge and tolerance class H High productivity through a wear-resistant coating and controlled chips The combination of the Tiger·tec Gold coating and the WSP45G carbide grade delivers measurable gains in tool life and process stability. The PVD coating reduces flank wear and supports higher machining temperatures, so the insert maintains a stable cutting edge during medium- to high-duty milling. Because the geometry is optimised for predictable chips, the chipbreaker D57 promotes consistent chip evacuation and reduces the risk of built-up edge, which contributes directly to fewer interruptions and improved overall throughput. Broad material capability for fewer tool changes This insert is engineered for multi-material applications, indicated by the P/M/S designation: P for unalloyed and alloyed steel, M for stainless steel, and S for heat-resistant superalloys and titanium. That versatility means a single tooling inventory can cover a wider range of workpieces, lowering changeover complexity. The result is better process planning and reduced downtime, while maintaining surface quality and dimensional repeatability even under demanding thermal and mechanical loads. Compact geometry and robust mechanical accuracy for reliable clamping The round plate format with a nominal size of 20 and plate thickness 06 provides a secure clamping interface and many indexing positions, which spreads wear and extends life per insert. The designation ROHX2006M0-D57 and tolerance class H indicate consistent manufacturing tolerances for predictable performance in production fixtures. Together with the proven grade properties, this geometry supports stable toolpaths, simpler fixture validation and a favourable cost-per-part calculation for serial and batch runs. Contact Metav Werkzeuge for an application match or sample recommendation based on Tiger·tec Gold performance and workshop conditions Technical Data Article number: ROHX2006M0-D57-WSP45G-WALTER Product type: milling indexable insert Designation: ROHX2006M0-D57 WSP45G Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Insert shape: Round Size: 20 Thickness: 06 Chipbreaker: D57 Tolerance class: H Execution: X Special features Coating technology: Tiger·tec Gold (PVD) Carbide grade: coated cemented carbide Material suitability: P / M / S Format advantage: multi-index positions for wear distribution FAQ What materials is this insert designed to machine? The ROHX2006M0-D57 WSP45G insert is engineered for machining steel, stainless steel and high-temperature superalloys/titanium (P/M/S), making it suitable for varied workshop applications. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on the WSP45G grade reduces wear and improves thermal resistance, resulting in longer tool life and more consistent surface finish under elevated cutting temperatures. What is the purpose of the D57 chipbreaker on a round insert? The D57 chipbreaker promotes controlled chip formation and evacuation during milling, reducing built-up edge and improving process stability with fewer stoppages for manual chip clearing. Is the insert compatible with standard round-holder systems? The ROHX2006M0-D57 format is a standard round insert designed for common milling clamping systems that accept this designation; ensure the pocket and clamping geometry match the ROHX2006M0 specification. What does tolerance class H mean for production? Tolerance class H indicates tight manufacturing tolerances for the insert, which supports repeatable seating and consistent cutting performance across a production run. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
ROHX2006M08-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of a WHH15X coated carbide grade and the A57 chipbreaker for reliable chip control and cost‑effective running times; the round 20 design ensures flexible mounting and consistent seating. Order the ROHX2006M08-A57 WHH15X milling insert directly via Metav Werkzeuge or ask our consultants if needed. ROHX2006M08-A57 WHH15X milling insert – round 20 mm, A57 chipbreaker (Walter Tools) ROHX2006M08-A57 WHH15X is a precision indexable milling insert intended for versatile milling tasks across production environments Coated carbide grade WHH15X A57 chipbreaker for controlled chip formation Round 20 mm form for versatile mounting Tolerance class H for precise seating Improved chip control and longer edge life for efficient milling The combination of the WHH15X coated carbide and the A57 chipbreaker is designed to deliver stable chip formation and predictable cutting behaviour. Coated hardmetal inserts are engineered to reduce friction at the cutting edge, which supports extended edge life and lower thermal load during operations. For practical workflows this translates into fewer insert changes and reduced machine downtime, improving overall productivity. The A57 geometry was selected to manage chip flow in many milling situations; check the product matrix for exact material recommendations to ensure optimal performance. Design and mounting benefits for consistent process results The round 20 mm form provides a compact and universally mountable shape that benefits stations where indexable inserts are frequently changed. With tolerance class H and execution X, the insert is produced to tight dimensional standards that support reliable seating and repeatable positioning in compatible milling cutters. These mechanical attributes are intended to reduce vibration and ensure a consistent cutting state, which helps to maintain surface quality and repeatability across batches. Material suitability should be verified against the specific operation matrix supplied for this grade. Practical procurement and application guidance for workshop reliability As part of the Walter open series, this insert is specified for users seeking a balance of process reliability and straightforward logistical handling. The product is supplied as the ISO designation ROHX2006M08-A57 WHH15X, which assists in exact ordering and reduces the risk of mix-ups on the tool crib. For application tuning, the machining parameters depend on the workpiece material and machine setup; reference the manufacturer's product matrix and tailor speeds and feeds accordingly. Walter Tools is recognised for its expertise in precision tooling and stable cutting-edge performance, which supports consistent, high-quality results across production runs. For dependable chip control and repeatable milling performance, procure the Walter Tools ROHX2006M08-A57 WHH15X inserts via Metav Werkzeuge; Metav Werkzeuge’s technical team can advise on material matching and cutter compatibility – contact info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical data SKU: ROHX2006M08-A57-WHH15X-WALTER Label: Fräswendeschneidplatte ROHX2006M08-A57 WHH15X Walter Tools ISO designation: ROHX2006M08-A57 WHH15X Part designation (without grade): ROHX2006M08-A57 Manufacturer: Walter Tools Specifications Size: 20 Thickness: 06 Tolerance class: H Execution: X Design & features Shape: Round Chipbreaker: A57 Grade: WHH15X (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability should be verified using the manufacturer’s product matrix; the ROHX2006M08-A57 WHH15X is a coated carbide grade intended for a broad range of applications, but the exact workpiece materials must be checked against the product matrix. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes controlled chip formation and evacuation, which can reduce recutting and improve surface finish when machining under appropriate cutting conditions. Can this round insert be used in common milling cutter systems? The round 20 form is widely compatible with milling cutter systems designed for indexable round inserts; ensure cutter clamping and tolerance class H match the insert specification before assembly. What information is included in the ISO designation? The ISO designation ROHX2006M08-A57 WHH15X provides the insert geometry, chipbreaker, and grade, supporting precise ordering and correct identification for replacement and stock management. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), with its headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the listed brands; the offered article is an original, factory‑new product of the manufacturer.
ROHX2006M08-A57 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a dedicated WKK25G grade optimised for abrasive cast iron and the A57 chipbreaker to achieve reliable, repeatable machining of cast components; order the insert directly via Metav Werkzeuge or ask the consultants for an on-machine process recommendation. ROHX2006M08-A57 WKK25G – Milling indexable insert for cast iron by Walter Tools ROHX2006M08-A57 WKK25G is a round milling indexable insert designed for productive machining of cast iron parts in series production and repair applications Coated carbide Tiger‑tec Gold Optimised for cast iron (ISO K) Round insert, 20 mm diameter A57 chipbreaker for short chips Consistent wear performance for abrasive materials The Tiger‑tec Gold coating combined with the WKK25G carbide grade delivers improved resistance to abrasive wear commonly encountered when machining cast iron. The multilayer CVD/PVD-style coating and the carbide substrate are engineered to slow flank wear and maintain a stable cutting edge, which translates directly into longer tool life and fewer index changes. For production environments where downtime impacts output, this enhanced durability supports higher throughput and predictable tool-change intervals. Reliable chip control reduces machine downtime The integrated A57 chipbreaker is shaped to create short, controlled chip forms when working with brittle cast materials. Short chips minimise entanglement and evacuation issues, reduce the risk of surface damage, and improve process stability. Combined with the insert’s round geometry, the chip control promotes smoother feed transitions and consistent cutting forces, which helps to protect spindle bearings and fixtures while lowering the frequency of manual chip clearing. Geometry and dimensions for flexible milling strategies The insert’s round form and the 20 designation offer multi-directional entry capability and a forgiving contact zone for interrupted cuts or varying approach angles. The plate thickness 06 and tolerance class H indicate a robust seat fit and repeatable positioning in standard milling cutter bodies. This geometry supports both shoulder and face milling operations where cast iron components require rapid metal removal with manageable surface quality. Practical benefits for shop-floor efficiency Choosing this coated indexable insert means a pragmatic balance of tool life and process security: the grade is tuned for cast iron’s abrasive nature, the coating reduces wear escalation, and the chipbreaker eases post-process cleaning. For production engineers the result is fewer unscheduled tool changes and a more consistent surface finish across batches. Integration into existing toolholders is straightforward owing to the standard iso-style designation and round‑insert compatibility. Application notes and material suitability The insert is explicitly allocated to the ISO material group K (cast iron); it is therefore recommended for grey and nodular cast iron grades where short, brittle chips predominate. The WKK25G grade is particularly appropriate where abrasive constituents in the cast structure would otherwise accelerate edge wear. For mixed‑material workpieces or where a different surface finish is required, selection of an alternative grade or geometry may be advisable. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. For application advice and to specify the right Tiger‑tec Gold insert for a given cast‑iron process, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 – Metav Werkzeuge can support grade selection and cutter setup for immediate implementation. Technical data SKU: ROHX2006M08-A57-WKK25G-WALTER Designation: ROHX2006M08-A57 WKK25G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Core dimensions Shape: Round Size: 20 Thickness: 06 Chipbreaker: A57 Tolerance class: H Features / Applications Coating: Tiger‑tec Gold (coated carbide) Material application: Cast iron (ISO K) Execution: X Plate family: ROHX2006M08-A57 FAQ Is this insert suitable for cast iron machining? Yes. The ROHX2006M08-A57 WKK25G insert is specifically developed for the ISO K material group and is optimised for machining cast iron. What does the WKK25G grade signify? WKK25G is Walter Tools’ coated carbide grade within the Tiger‑tec Gold family, formulated to resist abrasive wear common in cast iron applications. How does the A57 chipbreaker help on the shop floor? The A57 chipbreaker produces short, controlled chips when machining brittle cast materials, reducing chip entanglement and improving process reliability. What are the key geometric details to check before fitting? Confirm the round insert form, 20 size and 06 thickness match the cutter body; also ensure the tolerance class H corresponds to the seat specifications of the toolholder. Can this insert be used for interrupted cuts on rough cast surfaces? Yes. The round geometry and the grade’s wear resistance make the insert suitable for interrupted cutting encountered on rough cast surfaces, while the chipbreaker supports stable chip evacuation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ROHX2006M08-A57 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WKP35G grade for prolonged tool life and consistent chip control when machining steel and cast iron; order original Walter Tools inserts directly via Metav Werkzeuge or consult Metav's technical advisors for application support. ROHX2006M08-A57 WKP35G — Milling indexable insert, Tiger‑tec Gold coating, for steel and cast iron (Walter Tools) A ROHX2006M08-A57 WKP35G milling insert engineered for productive, reliable machining of steel and cast iron, supplied in a round 20 mm format for versatile milling applications Tiger‑tec Gold coating for extended tool life WKP35G grade for steel and cast iron machining Round 20 mm form for stable milling A57 chipbreaker for reliable chip control Higher productivity through optimised grade and coating The combination of Tiger‑tec Gold coating and the WKP35G carbide grade delivers a measurable improvement in wear resistance and thermal stability, resulting in longer tool life and fewer index changes on the shop floor. Designed for the demands of ISO group P and K, this insert handles the heat and abrasive conditions typical of steel and cast iron turning and milling. The coated carbide substrate reduces flank wear and protects the cutting edge during interrupted cuts, while the geometry and chipbreaker reduce rework and unplanned downtime. These technical choices translate into a more predictable process and improved overall equipment effectiveness. Consistent surface quality and dependable chip evacuation A dedicated A57 chipbreaker is integrated to control swarf form across a range of feeds and depths, which contributes to a consistent surface finish and stable cutting forces. The round 20 mm form increases seating stability in milling cutters and spreads cutting loads, helping to avoid premature edge failure under heavy engagement. By stabilising chip formation and evacuation, the insert supports higher material removal rates with reduced risk of built-up edge, so machining cycles remain efficient and results stay within tolerances—particularly important for repeat production runs where surface integrity is critical. Easy integration and reliable repeatability in production Tolerance class H and the standardised format simplify tool management and replacement cycles in multi‑shift environments. The insert’s design suits a wide range of cutter bodies that accept round indexable inserts, enabling straightforward stocking and interchangeability. As part of the Tiger‑tec Gold series from Walter Tools, this geometry and grade combination is intended to offer reproducible performance across jobs, which assists planning for maintenance intervals and tooling budgets. For application‑specific recommendations and to ensure optimal cutter selection, Metav Werkzeuge can provide technical guidance based on machining parameters and component requirements. Contact Metav Werkzeuge for tailored application advice or to secure original Walter Tools Tiger‑tec Gold inserts for improved productivity and tool life Technical data Article number: ROHX2006M08-A57-WKP35G-WALTER Name: Fräswendeschneidplatte ROHX2006M08-A57 WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core measurements Insert diameter: 20 mm Thickness code: 06 Tolerance class: H Shape: Round Special features Grade: WKP35G Chipbreaker: A57 Applicable materials: steel (P), cast iron (K) Execution: X FAQ Which materials is this insert suitable for? The ROHX2006M08-A57 WKP35G milling insert from Walter Tools is specified for ISO groups P and K, meaning it is suited to machining steel and cast iron as indicated by its grade and series designation. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on this insert reduces abrasive and thermal wear, improving edge life and enabling more stable machining results when processing demanding steels and cast irons. How does the A57 chipbreaker affect production? The A57 chipbreaker shapes and breaks chips reliably across common feeds, enhancing chip evacuation, reducing the risk of surface damage, and supporting consistent machining cycles with fewer interruptions. What are the key dimensions and tolerances for integration? The insert is supplied in a round 20 mm form with thickness code 06 and tolerance class H, facilitating interchangeability and stable seating in compatible milling cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trade names and trademarks are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and there is no connection between our company and the named brands. The offered item is an original, brand‑new product from Walter Tools.
ROHX2006M08-D57 WPP35G WPP35G Wendeplatten - Walter Tools
High-performance WPP35G cutting grade in the Tiger·tec Gold series offers a reliable balance of wear resistance and toughness, delivering stable chip formation and consistent results when machining steel; order directly via Metav Werkzeuge or consult their specialists for application support. ROHX2006M08‑D57 WPP35G milling insert (Tiger·tec Gold) for steel — Walter Tools ROHX2006M08‑D57 WPP35G is a round milling insert designed for productive steel machining, combining a Tiger·tec Gold coating with a D57 chipbreaker for stable chip control Tiger·tec Gold coating for long tool life Optimised D57 chipbreaker for stable chips Round 20 mm insert for high‑feed milling Designed for steel (ISO group P) Consistent performance for steel milling The coated carbide WPP35G grade, part of the Tiger·tec Gold series, is engineered specifically for steel (ISO group P) applications. The combination of coating technology and substrate composition produces stable chip formation under typical steel cutting temperatures, which reduces unpredictable wear and helps maintain reproducible cutting conditions. For production environments this translates into fewer tool changes and steadier cycle times, supporting higher process reliability and predictable output. Economy through extended tool life and productivity A key benefit of the Tiger·tec Gold grade is its emphasis on balanced properties: enhanced wear resistance without sacrificing toughness. This balance increases tool life and allows for sustained cutting parameters, improving throughput in serial milling tasks. With a tolerance class H and an execution optimised for repeated operations, the insert contributes to lower overall machining costs by reducing downtime and scrap, while enabling operators to focus on process optimisation rather than frequent insert replacement. Better surface quality and controlled chip evacuation The D57 chipbreaker is designed to shape and break chips reliably in a wide range of feed rates, which improves chip control and minimises rework caused by poor evacuation. The round geometry and the specified size ensure even cutting engagement and consistent surface finish across interrupted and continuous cuts. For teams upgrading tooling strategies, this insert supports both stable roughing passes and pre‑finishing operations where a predictable surface is required. Easy integration and application support As a standard round insert with defined size and thickness codes, the unit fits common milling cutter assemblies and clamping systems without special adaptation. The Tiger·tec Gold surface treatment is documented for steel machining, so cutting data from similar grades can be used as a reliable starting point. For matching the right holder, optimising cutting parameters or receiving further technical data, Metav Werkzeuge is available to advise on application specifics and to provide tailored recommendations. For a tailored recommendation on using Walter Tools' WPP35G inserts in steel machining scenarios, contact Metav Werkzeuge for cutting data and supply options: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: ROHX2006M08-D57-WPP35G-WALTER Article designation: ROHX2006M08-D57 ISO designation: ROHX2006M08-D57 WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Size: 20 Thickness: 06 Tolerance class: H Chipbreaker: D57 Materials / Special features Coating: Tiger·tec Gold Grade: WPP35G (coated carbide) Application: Steel (P) Shape: Round Execution: X Series description: WPP35G is a Walter cutting grade; coated carbide; suited for steel with a balance of wear resistance and toughness FAQ Which materials is this insert intended for? The ROHX2006M08‑D57 WPP35G insert is specified for machining steel (ISO group P); the grade and coating are optimised for typical steel chip formation and cutting temperatures. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance while preserving toughness, resulting in longer tool life and more consistent cutting performance when milling steel. How does the D57 chipbreaker influence machining? The D57 chipbreaker shapes and breaks chips reliably across common feed ranges, improving evacuation and surface finish while reducing the risk of entanglement and tool damage. Is this round insert suitable for high‑feed milling cutters? The round geometry and size code make the insert compatible with many high‑feed and indexable milling cutter systems; it supports stable engagement and even cutting forces during operation. Where can cutting data and holder recommendations be obtained? Technical guidance and cutting parameter suggestions for the WPP35G grade are available from Metav Werkzeuge and the Walter Tools technical literature, which helps match the insert to appropriate holders and machining strategies. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation. The presented item is original, factory‑new merchandise of Walter Tools.
ROHX2006M0T8-A27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the A27 chipbreaker for dependable steel machining and consistent surface quality. Benefit from the round form and balanced grade for economical tool life and process stability. Order directly via Metav Werkzeuge or consult our specialists for application recommendations. ROHX2006M0T8-A27 WPP35G — Milling indexable insert, Tiger·tec Gold, for steel — Walter Tools The ROHX2006M0T8-A27 WPP35G is a round milling insert engineered for reliable steel machining, offering a coated-carbide grade optimised for typical heat and chip formation in ISO P applications. Tiger·tec Gold coating for extended tool life Designed for steel machining (ISO P) Round insert, 20 mm diameter A27 chipbreaker for controlled chip formation Consistent cutting performance with a coated-carbide grade The WPP35G grade, built on Tiger·tec Gold technology, provides a balanced combination of wear resistance and toughness for machining steels. As a coated carbide solution, the grade is designed to withstand the thermal and mechanical stresses typical of steel turning and milling, delivering stable cutting edges and predictable tool behaviour. This results in fewer interruptions and more reproducible cycle times on the shop floor. Improved chip control and surface finish through the A27 geometry The A27 chipbreaker is crafted to promote controlled chip formation in a wide range of cutting conditions, which helps maintain process reliability and reduces the risk of recutting or workpiece damage. Combined with the round insert geometry, the chip control characteristics support smoother evacuation and contribute to a consistent surface finish, particularly in finishing and semi‑finishing passes on unalloyed and alloyed steels. Flexible handling and cost-conscious machining The round form factor offers flexible clamping and orientation options, simplifying tool set‑up and reducing downtime during indexation. The combination of the Tiger·tec Gold coating and the WPP35G composition supports prolonged tool life, lowering the frequency of insert changes and improving cost per component. In practice, this translates to more stable production runs and reduced tooling-related logistics. Broad suitability for steel applications and process security Classified for ISO group P (steel), this insert is intended for both unalloyed and alloyed steels and is optimised for the characteristic heat and chip behaviour of these materials. The tolerance class H and the execution code X indicate consistent manufacturing precision, which supports repeatable clamping and predictable machining results. Use of this grade helps maintain process security across varying batch sizes and part complexities. Contact Metav Werkzeuge for application advice and availability of Walter Tools Tiger·tec Gold ROHX2006M0T8-A27 WPP35G inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ROHX2006M0T8-A27-WPP35G-WALTER Designation: ROHX2006M0T8-A27 WPP35G Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Facts Insert diameter: 20 Thickness code: 06 Chipbreaker: A27 Form: Round Tolerance class: H Grade: WPP35G Application group: P (steel) Special features Coated carbide (Tiger·tec Gold) Balanced wear resistance and toughness Suited to unalloyed and alloyed steels Execution: X Plate designation without grade: ROHX2006M0T8-A27 FAQ What materials can this insert machine effectively? The ROHX2006M0T8-A27 WPP35G insert is designed for ISO P (steel) applications and is suitable for both unalloyed and alloyed steels, addressing the typical heat and chip formation of these materials. How does the A27 chipbreaker influence machining? The A27 chipbreaker promotes controlled chip formation, which supports reliable chip evacuation and contributes to improved surface finish and reduced risk of recutting during steel machining. Which series and coating does this grade belong to? This grade belongs to the Tiger·tec Gold series; the coated‑carbide construction combines protective coating layers with a substrate engineered for balanced performance. Is the round insert suitable for finishing operations? Yes, the round geometry together with the WPP35G grade provides the process stability and chip control needed for finishing and semi‑finishing passes on steel. What does tolerance class H indicate for this insert? Tolerance class H denotes consistent manufacturing precision, which aids in predictable clamping and repeatable machining results across production batches. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory‑new product of the manufacturer.
ROMX0803M0-D57 WSM35G X Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and a dedicated WSM35G grade for secure cutting in high-temperature alloys; the rounded plate with the D57 chipbreaker ensures reliable chip control and extended edge life. Order the ROMX0803M0-D57 WSM35G directly via Metav Werkzeuge or ask the consultants for application support and availability. ROMX0803M0-D57 WSM35G – round milling insert, Tiger·tec Gold, Walter Tools ROMX0803M0-D57 WSM35G is a round indexable milling insert designed for robust machining of rostfreier Stahl and heat-resistant superalloys Tiger·tec Gold coating for wear resistance Optimised D57 chipbreaker for secure chips Round geometry size 08 for profile versatility Engineered for rostfreier Stahl and superalloys High wear resistance for consistent productivity The insert features Tiger·tec Gold coating combined with the WSM35G grade to provide enhanced thermal and abrasive resistance. This combination supports a stable cutting edge when machining demanding materials, which translates directly into fewer tool changes and higher machine uptime. The coated cemented carbide substrate is optimised to reduce flank wear and maintain dimensional consistency during longer runs, so production flow remains predictable and efficient. For operations that prioritise throughput, this wear package helps lower overall tooling costs through improved life and process reliability. Secure chip control and edge stability for smooth milling A decisive advantage of the tool is the D57 chipbreaker integrated into the round plate geometry. The chip control strategy minimises built-up edge and prevents entangling chips in interrupted or continuous cuts, improving surface quality and reducing rework. The round geometry combined with tolerance class M ensures accessible entry angles and evenly distributed cutting forces, which helps to avoid local overloads on the insert. In practice, this means quieter running, reduced vibration and better repeatability on profile and shoulder milling tasks — particularly important when machining materials that tend to weld to the cutting edge. Application guidance and compatibility with demanding alloys The indexable plate is specified for machining groups S and M according to ISO 513, making it suitable for heat-resistant superalloys and rostfreier Stahl. Its design supports secure chip formation and thermal stability where materials exhibit high toughness or poor thermal conductivity. For best results, pairing the insert with appropriate cutter bodies and using adequate coolant strategies is recommended; for process optimisation and cutting-parameter guidance, technical consultation is available. The combination of material suitability and a robust coating concept positions this insert as a practical choice for shops facing tough workpiece challenges. For precise selection and procurement of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored application advice and fast order handling. Technical data SKU: ROMX0803M0-D57-WSM35G-WALTER Article designation: ROMX0803M0-D57 WSM35G Product type: Milling insert (round) Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 03 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: D57 Geometry: round Material applicability: S / M rostfreier Stahl applicable FAQ What materials is this insert suitable for? The ROMX0803M0-D57 WSM35G insert is designed for machining materials classified S and M, in particular heat-resistant superalloys and rostfreier Stahl, delivering stable edge life under thermal load. How does the D57 chipbreaker improve performance? The D57 chipbreaker on the round insert provides controlled chip formation and evacuation, reducing built-up edge and improving surface finish during both continuous and interrupted milling. Is this insert compatible with standard round cutter bodies? Yes, the round geometry and the ROMX ISO designation are compatible with cutter bodies designed for round indexable inserts; verify seat type and size before assembly. Can the grade handle high-temperature applications? The WSM35G grade within the Tiger·tec Gold series is formulated for thermal and abrasive resistance, making it suitable for applications where cutting temperatures are elevated. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is a leading manufacturer of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are used for explanatory purposes only. The offered article is an original, factory-new product of the manufacturer.
ROMX0803M04-D57 WKK25G Wendeplatten - Walter Tools
Take advantage of the WKK25G grade and Tiger·tec Gold technology for stable, wear‑resistant milling of cast iron; the round geometry with D57 chipbreaker provides consistent chip control and reduced downtime. Order or request application advice through Metav Werkzeuge for a fast, professional solution. ROMX0803M04-D57 WKK25G Round milling insert for cast iron by Walter Tools — Tiger·tec Gold coating The ROMX0803M04-D57 WKK25G is a round milling insert optimised for machining cast iron, combining a robust coated substrate with a chipbreaker designed for short, controlled chips in abrasive materials. Tiger·tec Gold coated for long life Specifically for cast iron machining Round insert, size 08, D57 chipbreaker High process stability and consistent results Consistent performance and extended tool life for cast iron milling The combination of Tiger·tec Gold coating and the WKK25G grade delivers pronounced wear resistance against the abrasive nature of cast iron. The tailored coating reduces flank and crater wear, which directly extends tool life and lowers tooling costs per component. For production environments where repeatability matters, this configuration helps maintain dimensional stability and surface quality over longer tool cycles, improving overall productivity without more frequent insert changes. Predictable chip formation reduces interruptions The D57 chipbreaker and round insert geometry are engineered to produce short, breaking chips typical for cast iron machining. This leads to reliable chip control, fewer clogs in the toolpath and easier evacuation from the cut. Operators benefit from reduced machine stoppages and less manual intervention, especially in high-volume milling operations where consistent chip behaviour is essential for uninterrupted runs and stable cycle times. Robust grade and edge stability for reliable machining The WKK25G carbide grade, combined with the Tiger·tec Gold coating, supports a stable cutting edge under the shock and abrasion common when working with cast materials. Edge integrity is preserved over repeated passes, which means fewer unexpected rejections and a more predictable process window. Using inserts from a recognized tooling portfolio ensures compatibility with common toolholders and clamping systems while supporting repeatable process settings. Application tips for efficient integration into production Designed specifically for the machining group K, the insert is well suited for typical cast iron operations where short chips and abrasive wear dominate. The round shape allows flexibility in approach angles and can be beneficial for trochoidal or high-feed strategies where micro‑engagements and consistent cutting forces are required. When integrating the component into a tooling system, select appropriate feeds and speeds that account for the abrasive nature of cast iron to fully exploit the Tiger·tec Gold characteristics and the WKK25G grade benefits. For tailored application advice or to place an enquiry about Walter Tools Tiger·tec Gold inserts, please contact Metav Werkzeuge via eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will be glad to assist with tooling selection and availability Technical Data Article number: ROMX0803M04-D57-WKK25G-WALTER Designation: ROMX0803M04-D57 WKK25G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Size: 08 Thickness: 03 Chipbreaker: D57 Tolerance class: M Special features Grade: WKK25G Suitable for: cast iron Coating technology: Tiger·tec Gold Execution: X Insert form: Round SKU: ROMX0803M04-D57-WKK25G-WALTER FAQ Which materials is this insert intended for? This insert is optimised for machining cast iron; the WKK25G grade and Tiger·tec Gold coating are tuned to resist abrasive wear and handle the short, breaking chips typical of cast‑iron materials. How does the D57 chipbreaker influence machining? The D57 chipbreaker promotes short, controlled chips during milling in cast iron, improving chip control, reducing rework time and supporting continuous production runs. What are the identifying details to order the correct insert? Order using the designation ROMX0803M04-D57 WKK25G or the SKU ROMX0803M04-D57-WKK25G-WALTER; this ensures the round insert in the 08 format with the D57 chipbreaker and WKK25G grade is supplied. Can the insert be used with different approach angles and strategies? Yes, the round geometry provides flexibility for various milling strategies, including trochoidal and high‑feed approaches, where consistent engagement and chip evacuation are required. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
ROMX0803M04-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coated carbide grade, optimised D57 chip control and robust round geometry for reliable steel machining; order or request application advice via Metav Werkzeuge for integration into existing tool systems. ROMX0803M04-D57 WPP35G milling indexable insert — Tiger·tec Gold, for steel (Walter Tools) ROMX0803M04-D57 WPP35G is a round milling indexable insert engineered for efficient ISO P (steel) machining, combining a wear‑resistant coating with a dedicated chipbreaker for consistent production results Tiger·tec Gold coating for long tool life Optimised D57 chipbreaker for stable chips Designed for machining steel (ISO P group) Greater process efficiency through a high‑performance coating The Tiger·tec Gold coating on this grade delivers significantly improved wear resistance compared with uncoated substrates. By combining a coated carbide substrate with a multi‑layer surface treatment, thermal and abrasive wear during high‑speed milling of steel is reduced; this translates into longer tool life and fewer index changes on the machine. The coated surface also supports steady cutting forces, which aids cycle‑time consistency and contributes directly to lower overall machining costs in series production. Consistent chip control for predictable surface quality The D57 chipbreaker geometry is designed to manage typical steel chip formation, reducing long, stringy chips and improving evacuation in through‑cut and slotting operations. As a round insert, the geometry promotes uniform cutting edge engagement and repeatable contact conditions, leading to reliable surface finishes and easier process parameter setting. For shops aiming to reduce rework and machine downtime, predictable chip behaviour from an optimised breaker is a decisive operational benefit. Practical workshop application and selection guidance The insert designation ROMX0803M04-D57 WPP35G indicates a plate size of 08 with a plate thickness of 03 and tolerance class M, suitable for general milling setups where ISO P materials are the primary workpiece group. The WPP35G grade is positioned for a balance of toughness and wear resistance, making it suitable where a mix of wear and occasional interruptions occurs. Integration into existing toolholders is straightforward thanks to the standard ROMX geometry; selecting this grade helps maintain throughput while offering robust performance across a wide range of steel alloys. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering guidance Technical data Article number: ROMX0803M04-D57-WPP35G-WALTER Product: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G ISO designation: ROMX0803M04-D57 WPP35G Facts Plate size: 08 Plate thickness: 03 Chipbreaker: D57 Tolerance class: M Form: Round Special features Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) Execution: X Series description: WPP35G is a Walter grade optimised for steel Designation without grade: ROMX0803M04-D57 FAQ What materials are best machined with this insert? The ROMX0803M04‑D57 WPP35G insert (Walter Tools milling indexable insert) is formulated primarily for steel machining and corresponds to ISO P workpiece groups. How does the D57 chipbreaker affect machining? The D57 chipbreaker on this Walter Tools grade controls chip formation in steel, improving evacuation and reducing the risk of long chips that can compromise surface quality. Is this insert suitable for high‑speed milling? With the Tiger·tec Gold coating and a coated carbide substrate, the insert is engineered for elevated cutting speeds typical in modern milling, yielding increased tool life under appropriate cutting conditions. Can the ROMX0803M04‑D57 be used in interrupted cuts? WPP35G offers a balanced toughness and wear resistance that performs well under light interruptions common in milling steel, supporting stable edge life in a range of operations. What should be considered when replacing an existing insert with this grade? Check seat geometry and clamping compatibility for ROMX form; select cutting parameters aligned with ISO P recommendations and take advantage of the grade’s wear resistance to extend index intervals. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROMX0803M04-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a high-performance combination of the Tiger·tec Gold coating and the WSM35G grade for secure chip formation when machining stainless steel and heat-resistant alloys; the round insert form and D57 chipbreaker support stable cutting and predictable tool life. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific advice. ROMX0803M04‑D57 WSM35G — indexable milling insert, Tiger·tec Gold coating, Walter Tools ROMX0803M04‑D57 WSM35G is a round indexable milling insert designed for productive machining of stainless steel and heat‑resistant superalloys in demanding industrial applications Tiger·tec Gold coating for high thermal resistance Optimised WSM35G grade for stainless and superalloys Round insert, size 08 with D57 chipbreaker Tolerance class M for precise seating Increase process reliability with a heat‑resistant coating The combination of the Tiger·tec Gold coating and the WSM35G carbide grade gives improved resistance to thermal loading during interrupted or high‑energy cuts. Coated carbide reduces flank wear and supports stable chip formation, which lowers the risk of build‑up on the cutting edge when machining stainless steel or superalloys. For production environments this means fewer unexpected tool changes and more predictable cycle times. The description of the coating as a thermal barrier explains why it performs better than uncoated grades under elevated temperatures. Consistent cutting geometry for repeatable results The round plate shape in size 08 combined with the D57 chipbreaker and tolerance class M ensures a consistent cutting geometry and reliable seating in compatible tool holders. The chipbreaker geometry helps to control chip flow and reduces the tendency for long, stringy chips when processing ductile, work‑hardening materials. Tight tolerance specification supports reproducible part quality over series production and simplifies tool inventory management through predictable insert interchangeability. Practical production advantages and material scope Specified for the ISO groups M and S, the insert is suitable for stainless steel as well as heat‑resistant superalloys and titanium where edge stability and wear resistance are required. The grade is a coated carbide optimised for difficult‑to‑machine materials, delivering a balance between edge strength and wear protection. In workshop practice this translates into longer tool life in heavy or mixed cutting conditions and improved surface finish, reducing rework and aiding downstream processes. The manufacturer Walter Tools is known for delivering tools that support high productivity and consistent results. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and assistance with selecting the correct insert size and grade for specific stainless steel or superalloy tasks — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ROMX0803M04‑D57‑WSM35G‑WALTER Item: Fräswendeschneidplatte / indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Core measurements Plate size: 08 Plate thickness: 03 Chipbreaker: D57 Tolerance class: M Materials & special features Coated carbide (beschichtetes Hartmetall) Material applicability: S / M Suitable for stainless steel and heat‑resistant superalloys (ISO S, M) Round plate form FAQ What materials is the ROMX0803M04‑D57 WSM35G best suited for? The ROMX0803M04‑D57 WSM35G insert is specified for ISO groups M and S, making it suitable for machining stainless steel and heat‑resistant superalloys (including titanium), where thermal resistance and edge stability are critical. How does the D57 chipbreaker improve machining performance? The D57 chipbreaker controls chip form and evacuation, promoting secure chip formation and reducing edge build‑up during milling of ductile or work‑hardening materials, which supports consistent surface quality. What does tolerance class M mean for toolholders and repeatability? Tolerance class M indicates a precise seating fit that enhances repeatability across tool changes, aiding consistent part geometry and predictable tool life in serial production. Is the WSM35G grade coated or uncoated? The WSM35G grade is a coated carbide belonging to the Tiger·tec Gold technology family, optimised for thermal resistance and stable cutting in demanding materials. Can this insert be used for interrupted cuts and roughing applications? Yes; the thermal stability of the Tiger·tec Gold coating combined with the robust WSM35G grade makes the insert suitable for heavy or interrupted milling where edge strength and heat resistance are required. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer (Walter Tools).
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com