RNMX1206M0-K67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust K67 chipbreaker and a 0° negative rake to secure long tool life and stable chip control in demanding milling operations; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. RNMX1206M0-K67 WSP45G milling indexable insert — Tiger·tec Gold, Walter Tools The RNMX1206M0-K67 WSP45G is a round milling indexable insert designed for versatile use in steel, stainless steel and heat‑resistant alloys, optimised for secure chip control and repeatable cutting performance. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys K67 chipbreaker for secure chip control Round insert, 12 mm, 0° negative rake Consistent performance across steel, stainless steel and superalloys The Tiger·tec Gold grade WSP45G is a PVD‑coated carbide developed for milling tasks that require a balance of toughness and wear resistance. The coating and substrate combination supports reliable cutting under the temperature and wear conditions typical for machining steel (P), stainless steel (M) and heat‑resistant superalloys/titanium (S). This results in fewer unplanned tool changes and a more predictable production rhythm, which is particularly valuable in mixed‑material production batches and when machining components with challenging heat generation. Improved chip control and surface quality with the K67 chipbreaker The integrated K67 chipbreaker is designed to form short, controllable chips during axial and radial engagement in milling. Stable chip formation reduces the risk of built‑up edge and enhances coolant access at the cutting zone, which contributes to a better surface finish and reduces rework. For shops aiming to raise first‑pass yield and minimise cycle time, the combination of chip control and a 0° negative rake helps maintain a robust cutting edge during interrupted cuts and heavy engagement. Robust geometry and economical indexing for milling operations The round geometry and the designation RNMX1206M0 reflect an insert built for versatility and easy indexing. The 0° negative rake provides additional edge support, making the insert suitable for applications with tool deflection or interrupted cuts; the geometry supports reliable seat seating and repeatable positioning. Using indexable inserts such as this reduces tooling waste: when the edge is worn, the insert is rotated or replaced rather than regrinded, improving operational efficiency and lowering overall tooling cost per part. Practical benefits for workshop and production environments Tolerance class M and the compact dimensions (round, size 12, thickness code 06) make the insert compatible with a wide range of milling cutters and adaptors. The Tiger·tec Gold technology emphasises stable edge life and a broad workpiece material range, assisting process planners to consolidate tooling families. Where surface integrity and consistent tolerances are required, the grade’s wear characteristics support fewer tool‑related process deviations and more reproducible component quality. For milling operations that demand process reliability and extended tool life, request stock availability or an application assessment from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RNMX1206M0-K67-WSP45G-WALTER Designation: RNMX1206M0-K67 WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Diameter: 12 mm Thickness code: 06 Rake angle: 0° (negative) Tolerance class: M Chipbreaker: K67 Special features Grade: WSP45G (Tiger·tec Gold) Coating: PVD‑coated carbide Suitable materials: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Insert shape: Round Application: Milling FAQ What materials can this insert machine effectively? The RNMX1206M0-K67 WSP45G insert is rated for steel, stainless steel and superalloys/titanium, reflecting the P/M/S suitability of the Tiger·tec Gold grade. How does the K67 chipbreaker benefit surface finish? The K67 chipbreaker promotes controlled chip formation and evacuation, which helps maintain coolant access at the cutting edge and supports improved surface quality when using the WSP45G grade. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake provides added edge support, making the insert robust under interrupted cutting conditions and during engagements with variable depth of cut. Can this insert be used on standard milling cutters? The RNMX1206M0 geometry and size 12 format are compatible with many standard milling cutter families; tolerance class M supports reliable seating and repeatable indexing. What is the main advantage of the Tiger·tec Gold technology in daily production? Tiger·tec Gold combines wear resistance and fracture toughness to offer extended edge life and stable performance across a broad range of workpiece materials, reducing tool changes and improving process consistency. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROGX0803M04-G88 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of robust uncoated carbide, precise G88 chip control, and consistent tolerance class G for reliable milling cycles and reduced tool-change interruptions. Order the insert directly via Metav Werkzeuge or request application advice from our consultants if required. ROGX0803M04-G88 WK10 – Milling indexable insert by Walter Tools, round insert with G88 chipbreaker ROGX0803M04-G88 WK10 is a round milling indexable insert designed for productive general milling operations where an uncoated cemented-carbide grade and a dedicated chipbreaker are required WK10 uncoated carbide grade Round insert, size 08, thickness 03 G88 chipbreaker for reliable chip control Tolerance class G for consistent interchangeability Improved productivity through focused material and geometry The combination of the WK10 uncoated cemented-carbide grade and the G88 chipbreaker delivers a balance of toughness and wear resistance tailored for a range of milling tasks. The uncoated carbide substrate provides a predictable cutting edge that is often preferable for interrupted cuts and variable feed conditions, while the chipbreaker actively shapes and evacuates chips to reduce recutting and machine downtime. These attributes support higher process stability and can contribute to longer tool life in suitable applications. Material suitability should be verified against the product matrix for optimal selection. Consistency and process security in series production A defined tolerance class G and standardised round form ensure repeatable seating and tool-holder interchangeability, which reduces set-up time and variation between inserts. The compact form (size 08, thickness 03) supports a precise cutting geometry that is beneficial for shops prioritising predictable surface finish and dimensional conformity. For production environments where machine uptime and reproducible results are critical, this insert design helps maintain consistent part quality and simplifies inventory handling due to its standardised geometry. Practical selection and safe application advice The insert is supplied in the Walter Schneidstoffsorte - Serie offen, grade WK10 (uncoated cemented carbide). Because the exact workpiece material compatibility depends on the full product matrix, verify machining recommendations and cutting data before use. The G88 chipbreaker is engineered to reduce long, stringy chips and encourage short, controllable fragments; this lowers the risk of chip entanglement and improves surface integrity. For unfamiliar applications, consult the product documentation or request cutting-parameter guidance to match feeds, speeds and engagement for best results. For tailored technical advice on Walter Tools inserts and to confirm suitability, contact Metav Werkzeuge for application recommendations and availability by phone or email: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ROGX0803M04-G88-WK10-WALTER Designation: ROGX0803M04-G88 WK10 Manufacturer: Walter Tools Product type: Milling indexable insert Series: Walter Schneidstoffsorte - Serie offen Facts Insert size: 08 Thickness: 03 Chipbreaker: G88 Grade: WK10 Tolerance class: G Special features Uncoated cemented carbide (unbeschichtetes Hartmetall) Round insert form Execution: X Material reference: Katalogabhängig Check product matrix for material suitability FAQ What materials is this insert suitable for? The ROGX0803M04-G88 WK10 insert is an uncoated cemented-carbide grade; suitability for specific materials should be checked in the product matrix and with Walter Tools application data. How does the G88 chipbreaker improve the milling process? The G88 chipbreaker on this insert shapes chips into shorter, controllable segments, which reduces recutting and helps maintain a cleaner machining area for more stable operation with the Walter Tools insert. Can this insert be used in interrupted cuts? Yes, the uncoated carbide WK10 grade and round geometry make the insert appropriate for applications with intermittent engagement; verify cutting data for the specific workpiece material. Is the insert compatible with standard tool-holders? Tolerance class G and standardised geometry support interchangeability with compatible milling tool-holders; confirm holder compatibility with the insert designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROGX0803M04-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of sharp uncoated cutting performance, controlled chip formation and simple insert handling for reliable milling of non‑ferrous materials. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ROGX0803M04-G88 WXN15 milling insert for non‑ferrous metals — Walter Tools The ROGX0803M04-G88 WXN15 is a round milling insert designed for precise, high‑efficiency machining of non‑ferrous metals such as aluminium, copper and brass. Round insert ROGX0803M04-G88 for milling operations Uncoated solid carbide WXN15 for sharp cutting edges Chipbreaker G88 for controlled chip formation Optimised for non‑ferrous metals such as aluminium Increased throughput when machining non‑ferrous alloys The WXN15 grade is an uncoated solid carbide formulation that provides an exceptionally sharp cutting edge, ideal for materials in the non‑ferrous group. With the chipbreaker G88 integrated into a round geometry, the insert produces short, controllable chips that reduce re‑cutting and improve toolpath consistency. This combination lowers cycle times and contributes to a steadier surface finish, which translates into fewer secondary operations and higher overall throughput in production environments. Predictable edge behaviour and reduced material adhesion A sharp, uncoated geometry minimises built‑up edge on soft metals, promoting low adhesion and consistent cutting forces. The round form and the specified size 08 / thickness 03 provide mechanical stability at moderate feeds while the G tolerance class ensures dimensional repeatability across batches. These characteristics support higher process reliability and make the insert suitable for short‑to‑medium runs where consistent part quality is required. Simple integration into indexable systems and secure process control Designed for the Walter N‑series, this insert fits established indexable tool bodies for straightforward replacement and positioning. The clear grade and geometry labelling facilitate rapid tool selection and reduced set‑up times, supporting lean production practices. For contract manufacturers and job shops wanting predictable results on aluminium or brass components, this insert delivers process security and easy stock management within the Walter indexable system. For individual application advice or to order Walter Tools inserts through Metav Werkzeuge contact our specialists by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and request guidance for the ROGX0803M04-G88 WXN15 insert Technical data Article number: ROGX0803M04-G88-WXN15-WALTER Product designation: ROGX0803M04-G88 WXN15 Manufacturer: Walter Tools Product type: milling indexable insert Series: Walter N‑Sortensystem Facts Plate form: Round Plate size: 08 Plate thickness: 03 Chipbreaker: G88 Tolerance class: G Special features Grade: WXN15 (uncoated solid carbide) Application group: N (non‑ferrous metals) Designed for sharp/uncoated applications Series/compatibility: Walter N‑series Execution: X FAQ Is this insert suitable for machining aluminium and other non‑ferrous metals? Yes. The ROGX0803M04-G88 WXN15 insert is optimised for non‑ferrous metals (ISO group N), offering a sharp edge and a chipbreaker geometry suited to aluminium, copper and brass. What does the WXN15 designation mean? WXN15 is the Walter Tools grade name for an uncoated solid carbide insert designed for sharp, low‑adhesion cutting in non‑ferrous materials. How does the chipbreaker G88 affect machining? The chipbreaker G88 promotes controlled chip formation and evacuation, which reduces the risk of long, stringy chips and helps maintain a consistent surface finish during milling. Can the insert be used in standard Walter N‑series tool holders? Yes. The insert is produced for the Walter N‑series system and is intended for secure seating and repeatable positioning in matching indexable tool bodies. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ROGX10T3M08-G88 WK10 X Wendeplatten - Walter Tools
Benefit from the combination of an economical WK10 uncoated carbide grade, the G88 chipbreaker and a compact T3 thickness for steady milling performance. Order the ROGX10T3M08-G88 WK10 directly via Metav Werkzeuge or consult the technical advisers if clarification is required. ROGX10T3M08-G88 WK10 milling indexable insert – round form, T3 thickness, G88 chipbreaker by Walter Tools The ROGX10T3M08-G88 WK10 is a round milling insert engineered to deliver consistent chip control and dependable edge life across general machining applications. Round form for flexible clamping T3 thickness for high rigidity G88 chipbreaker for consistent chips WK10 uncoated carbide, versatile use Predictable chip formation for reliable productivity The integrated G88 chipbreaker is designed to shape and discharge chips consistently under a wide range of cutting conditions. Controlled chip formation reduces the risk of built-up edge and workpiece rework, which in turn supports a steady production flow and fewer process interruptions. In practical terms, the chipbreaker geometry promotes short, manageable chips that simplify evacuation from the cutter body and reduce thermal load on the cutting edge. This technical approach leads to measurable gains in machining stability and overall throughput. Compact geometry and thickness for secure clamping A round form combined with T3 thickness provides a compact yet rigid platform that suits many milling bodies. The reduced overhang enabled by the T3 profile helps to lower vibration and improve surface finish while maintaining insert strength where it matters most. Round inserts also allow for multiple indexed cutting positions, supporting longer cumulative tool life before replacement. For applications where fixture space is limited or where consistent radial support is needed, this geometry offers a practical balance between stiffness and accessibility. WK10 uncoated carbide as a robust baseline grade The WK10 designation denotes an uncoated carbide grade intended as a versatile baseline for varying workpiece materials; its behaviour should be verified against the manufacturer’s product matrix for specific alloys and cutting conditions. As an uncoated option, the grade can be beneficial where thermal and chemical interactions with a coating are undesired or where occasional regrinding is planned. The straightforward carbide chemistry supports predictable wear patterns, simplifying process documentation and repeatability on the shop floor. Practical integration and selection guidance Selection of cutting data and machine parameters remains critical for achieving the full benefits of this insert: cutting speed, feed per tooth and axial depth must be matched to the chosen workpiece and machining strategy. The insert’s features—G88 chipbreaker, round shape and T3 thickness—are optimised for general milling tasks but will perform best when paired with the correct holder and machine rigidity. For precise material suitability and recommended cutting parameters, reference the Walter Tools product documentation or consult the technical resources available through Metav Werkzeuge to align the insert with production goals. For application-specific advice or to source Walter Tools inserts such as the ROGX10T3M08-G88 WK10, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for swift technical guidance Technical Data Article number: ROGX10T3M08-G88-WK10-WALTER Label: Fräswendeschneidplatte ROGX10T3M08-G88 WK10 Walter Tools Product type: milling indexable insert Manufacturer: Walter Tools Designation: ROGX10T3M08-G88 WK10 Series: Walter Schneidstoffsorte - Serie offen Execution: X Tolerance class: G Facts Plate size: 10 Plate thickness: T3 Tolerance class: G Special features Grade: WK10 (uncoated carbide) Chipbreaker: G88 Plate form: Round Plate designation without grade: ROGX10T3M08-G88 Material (catalogue): Katalogabhängig FAQ What types of machining are suitable for this insert? The ROGX10T3M08-G88 WK10 milling insert is intended for general milling tasks where controlled chip breaking and compact insert thickness support steady production; suitability for specific operations should be confirmed with the Walter Tools product matrix. How does the G88 chipbreaker improve machining performance? The G88 chipbreaker promotes short, consistent chips that ease evacuation, reduce edge loading and lower the likelihood of built-up edge, resulting in improved process stability and surface quality. Does the T3 thickness limit tool life compared with thicker grades? T3 indicates a compact thickness that enhances rigidity at reduced overhang; while thicker grades may offer greater bulk, the T3 profile delivers improved dynamic stability for many milling setups and supports multiple indexing positions for sustained tool life. Is WK10 coated or uncoated, and what does that mean for workpiece choices? WK10 is an uncoated carbide grade; this typically offers predictable wear behaviour and is a versatile starting point. Confirmation of optimal workpiece materials and cutting data should be sought in the manufacturer’s product matrix. Can the round form be used in standard indexable cutter bodies? Round inserts are commonly accommodated in a variety of milling bodies that accept circular geometries; correct seat and clamping must be confirmed for the intended cutter system. Hersteller: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered product names are used solely for clarification and do not imply any affiliation. The offered item is an original, factory-new product of the manufacturer.
ROGX10T3M08-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Efficient machining of non‑ferrous metals is achieved with the uncoated carbide WXN15 grade and the G88 chipbreaker, combined in a round 10 mm, T3‑thick insert for reliable chip control and consistent component finish. Order the insert directly via Metav Werkzeuge or consult the advisors for tailored application support. ROGX10T3M08-G88 WXN15 milling insert for non‑ferrous metals by Walter Tools ROGX10T3M08-G88 WXN15 is a round milling insert designed for sharp, uncoated cutting of non‑ferrous materials and light alloys Walter N‑series uncoated carbide WXN15 Round insert, 10 mm size T3 thickness Chipbreaker G88 for controlled chips Sharp edge geometry for NE‑metals Precision and performance for aluminium and other non‑ferrous metals The combination of uncoated carbide and the specialised WXN15 grade delivers low cutting forces and reduced material adhesion when machining non‑ferrous metals such as aluminium, copper and brass. The chipbreaker G88 is engineered to produce short, consistent chips, which reduces the risk of chip entanglement and supports uninterrupted production. For processors seeking measurable efficiency gains, this geometry enables higher feed rates without sacrificing surface quality, offering a direct improvement to cycle times and part consistency. Robust edge life and secure cutting action from a round geometry A round insert provides a continuous, positive cutting edge and inherent strength at the cutting tip; coupled with the T3 thickness, this yields a stable platform for aggressive light‑alloy milling. The sharp cutting edge characteristic of an uncoated grade reduces rubbing and heat buildup, which is especially beneficial where coatings would otherwise promote built‑up edge on sticky materials. The result is dependable tool life and consistent component finish even in demanding production runs. Application clarity and integration into production workflows This insert is part of the Walter N-series, optimised for NE‑group workpieces and sharp, uncoated applications. The 10 mm form factor and chip control make it suitable for pocketing, face milling and profile finishing of non‑ferrous components where cleanliness of chip and surface appearance are priorities. For customers transitioning from coated grades, the WXN15 family emphasises minimal adhesion and reliable chip evacuation, aiding in process stability and reproducible results. Contact Metav Werkzeuge for application advice and to request the ROGX10T3M08-G88 WXN15 insert from Walter Tools; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations Technical data Article number: ROGX10T3M08-G88-WXN15-WALTER Designation: ROGX10T3M08-G88 WXN15 Product type: milling insert Series: Walter N‑Sortensystem Grade: WXN15 (uncoated carbide) Shape: round Size: 10 mm Thickness: T3 Chipbreaker: G88 Tolerance class: G Execution: X Material application: N (non‑ferrous metals) Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The ROGX10T3M08-G88 WXN15 insert is designed for the N‑group — primarily non‑ferrous metals such as aluminium, copper and brass, where a sharp, uncoated edge minimises material adhesion. Does the insert have a coating? No, the WXN15 grade is an uncoated carbide specifically selected to preserve a sharp cutting edge for NE‑metal applications. What chip behaviour can be expected with the G88 breaker? The chipbreaker G88 produces short, controllable chips that improve evacuation and reduce risk of entanglement in milling operations. How does the round form influence cutting reliability? A round insert provides continuous edge strength and even wear distribution, which contributes to stable cutting forces and predictable tool life in intermittent or continuous milling. Is this insert part of a recognised series for process reproducibility? Yes, it belongs to the Walter N‑series, a system intended for consistent performance in non‑ferrous machining and ease of grade selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROGX1204M08-G88 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of uncoated carbide WK10, the G88 chipbreaker and compact round geometry for reliable chip control and consistent tool life; order directly via Metav Werkzeuge or request application advice from our consultants. ROGX1204M08-G88 WK10 – Round Milling Insert, G88 Chipbreaker, Walter Tools The ROGX1204M08-G88 WK10 is a round indexable milling insert designed for general milling operations where an uncoated cemented carbide grade and controlled chip formation are required Round insert ROGX1204M08-G88 WK10 Uncoated carbide grade WK10 G88 chipbreaker for controlled chips 12 format, thickness code 04 Reliable chip control for stable machining The insert features an uncoated carbide grade (WK10) combined with the G88 chipbreaker, delivering predictable chip formation and easier chip evacuation during slotting and light milling. This setup reduces the risk of chip entanglement and supports steady cutting conditions, which in turn improves cycle-time consistency and machine utilisation. The round geometry ensures multi-edge indexing and balanced cutting forces, helping to maintain tool life under varied operating regimes. Precision fit and consistent performance Manufactured to tolerance class G, the design offers repeatable positioning and reliable clamping in compatible toolholders. The nominal 12 format with thickness code 04 provides a compact footprint that is suitable for medium-duty milling operations where accessibility and tool rigidity matter. For users less familiar with carbide grades, "uncoated cemented carbide" means the insert relies on the substrate’s inherent hardness rather than surface coatings — a choice that often benefits interrupted cuts and applications where coating adherence is critical. Application guidance and practical benefits The insert is offered as part of the Walter open series and the grade WK10 is an uncoated hardmetal selection; suitability for specific workpiece materials should be verified against the product matrix supplied by the manufacturer. The compact, round format supports versatility across a range of milling tasks and simplifies inventory management because multiple cutting angles can be achieved with the same indexable blank. Technical queries or requests for material-specific recommendations can be addressed to Metav Werkzeuge to ensure optimal integration into existing machining processes. For application advice on the Walter Tools ROGX1204M08-G88 WK10 milling insert and assistance with toolholder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical data Article number: ROGX1204M08-G88-WK10-WALTER Label: Fräswendeschneidplatte ROGX1204M08-G88 WK10 Walter Tools Product type: Fräswendeschneidplatte Brand: Walter Tools ISO designation: ROGX1204M08-G88 WK10 Facts Size: 12 Thickness code: 04 Tolerance class: G Special features Grade: WK10 (uncoated cemented carbide) Chipbreaker: G88 Geometry: Round Series: Walter Schneidstoffsorte - Serie offen Execution code: X Material specification: Catalogue-dependent FAQ Which materials is the ROGX1204M08-G88 WK10 suitable for? Material suitability must be checked in the product matrix; the WK10 grade is an uncoated cemented carbide selection and may be suited to a broad range of machining tasks depending on the workpiece material Is the insert coated or uncoated? The ROGX1204M08-G88 WK10 is an uncoated insert (solid hardmetal), which can be advantageous for interrupted cuts and certain materials where coating performance is less predictable What does the G88 chipbreaker provide? The G88 chipbreaker is engineered to promote controlled chip formation and reliable evacuation, reducing chip-related interruptions and supporting consistent machining cycles Can the round insert be indexed for multiple edges? Yes, the round format allows multi-edge indexing so the cutting edge can be rotated to a fresh position, supporting economical use and simplified tool management How should suitability for hardened or exotic alloys be confirmed? Refer to the manufacturer’s product matrix and machining recommendations for the ROGX1204M08-G88 WK10; specific guidance ensures the grade, geometry and chipbreaker match the intended alloy and cutting conditions Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is original factory-new goods from the manufacturer. Walter Tools is used where applicable to describe the brand of the product.
ROGX1204M08-G88 WXN15 Wendeplatten - Walter Tools
Benefit from the combination of a sharp, uncoated WXN15 carbide grade and a dedicated G88 chipbreaker for reliable performance on non‑ferrous materials; the compact round 12 mm format supports flexible milling strategies and consistent chip removal. Order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. ROGX1204M08-G88 WXN15 round milling insert with G88 chipbreaker — Walter Tools ROGX1204M08-G88 WXN15 is a round milling insert designed for efficient machining of non‑ferrous metals in the Walter N‑System. Uncoated WXN15 grade for non‑ferrous metals G88 chipbreaker for consistent chip control Round 12 mm insert for versatile milling Walter N‑System for sharp, reliable edges Predictable performance on aluminium, copper and Messing The uncoated WXN15 grade is engineered specifically for NE‑metals and delivers a combination of sharp cutting edges and low adhesion tendencies, which is essential when machining aluminium, copper and Messing. The material’s geometry and edge preparation reduce built‑up edge formation; as a result, surface finish is improved and tool changes are less frequent. The insert’s intended use for ISO group N is stated by the manufacturer and means that the cutting behaviour is optimised for softer, ductile workpiece materials rather than hardened steels. Consistent chip formation and reduced rework time The G88 chipbreaker provides controlled chip formation to avoid long, stringy swarf and to improve evacuation in slotting and face‑milling operations. Controlled chips lower the risk of surface damage and simplify post‑process cleaning, which in turn reduces rework. The round insert geometry offers multiple effective cutting edges; when rotated, the plate provides repeatable geometry and steady cutting forces, contributing to a reliable production rhythm and predictable tool life. System compatibility and shop‑floor advantages Designed for the Walter N‑System, this round insert fits common toolholders and is produced to a tolerance class G, ensuring interchangeability and stable positioning in the cutter head. The modest plate size and the defined 12 diameter with 04 thickness allow compact cutter designs and economical edge utilisation. Integration is straightforward: inserts are changed quickly, repeatability is high and machining parameters can be standardised across similar NE‑metal operations, supporting process stability and reduced setup time. For technical advice or to request the ROGX1204M08-G88 WXN15 from Walter Tools, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ROGX1204M08-G88-WXN15-WALTER Label: Fräswendeschneidplatte ROGX1204M08-G88 WXN15 Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Walter N-Sortensystem Grade: WXN15 SKU: ROGX1204M08-G88-WXN15-WALTER Facts Diameter: 12 Thickness: 04 Chipbreaker: G88 Tolerance class: G Special features Uncoated carbide grade for NE‑metals Application: Non‑ferrous metals (ISO group N) Plate form: Round Execution: X Sort description: Sharp, uncoated application for aluminium, copper and Messing FAQ Is this insert suitable for aluminium milling? Yes. The ROGX1204M08‑G88 WXN15 insert is specified for ISO group N and is suitable for milling aluminium and other non‑ferrous metals with optimised edge geometry. Does the insert have a coating to reduce adhesion? No. The WXN15 grade is an uncoated carbide developed for sharp edges and low adhesion; chip control is achieved via the G88 chipbreaker rather than a coating. Can the plate be rotated to use multiple cutting edges? Yes. The round design allows indexed use of the cutting edges; rotation extends usable life and supports consistent cutting geometry. What benefits does the Walter N‑System bring to the workshop? The Walter N‑System ensures standardised edge geometry and compatibility with a range of toolholders, which supports repeatability and faster tool changes with the ROGX1204M08‑G88 WXN15. Which workpiece materials are explicitly recommended? The insert is intended for non‑ferrous materials as per ISO group N, for example aluminium, copper and Messing, where sharp, uncoated edges provide better surface results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only and do not imply any commercial relationship. The offered item is original and factory‑new from the named manufacturer.
ROGX1605M08-G88 WK10 Wendeplatten - Walter Tools
Benefit from the combination of a robust WK10 uncoated carbide grade and the G88 chipbreaker for reliable chip control and consistent machining results; these properties support stable tool life and predictable surface finish. Order the ROGX1605M08-G88 WK10 directly via Metav Werkzeuge or ask our consultants if needed. ROGX1605M08-G88 WK10 indexable milling insert, round form, G88 chipbreaker — Walter Tools The ROGX1605M08-G88 WK10 is a round indexable milling insert designed for general milling applications where controlled chip formation and predictable wear behaviour are essential; suitability across specific workpiece materials should be verified in the product matrix. WK10 uncoated carbide for broad applications Round insert, diameter 16, thickness 05 G88 chipbreaker for controlled chip formation Stable tolerance class G for consistent fitting Predictable chip control for smoother production The G88 chipbreaker is engineered to produce consistent, controlled chips that reduce the risk of entanglement and improve evacuation in both continuous and interrupted cuts. This controlled chip formation lowers the likelihood of unplanned stoppages and supports a steadier material removal rate, which translates into higher process reliability. As a result, toolpaths remain more predictable and downstream processes such as finishing and inspection benefit from fewer variations in surface quality and dimensional deviation. Durable, economical uncoated carbide for flexible use The insert’s WK10 grade is an uncoated carbide formulation intended for broad, catalogue-dependent applications; it offers a balance between wear resistance and economical running costs. The round geometry combined with the tolerance class G simplifies seating accuracy in the toolholder and enables uniform edge usage when indexed. For operations where coating is not required or where specific process parameters call for a naked cutting edge, this grade provides a straightforward, cost-conscious choice — verify the exact workpiece suitability in the documented product matrix before series deployment. Practical integration into machining setups With a round form and a nominal size of 16 and thickness code 05, the insert fits into commonly used indexable milling systems that accept circular inserts; the geometry helps to distribute cutting forces and can be advantageous in applications with variable engagement. The straightforward construction of the insert supports quick indexing and predictable reconditioning intervals, contributing to leaner tool management. For assistance in matching the ROGX1605M08-G88 WK10 to a specific toolholder or machining strategy, consult technical documentation or contact the technical advisors for tailored recommendations. Contact Metav Werkzeuge for expert application advice on Walter Tools inserts such as the ROGX1605M08-G88 WK10 and to confirm the right grade for the intended materials and machining task. Technical data Article number: ROGX1605M08-G88-WK10-WALTER Product designation: ROGX1605M08-G88 WK10 Product type: Indexable milling insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Numbers / core technical data Size: 16 Thickness code: 05 Tolerance class: G SKU: ROGX1605M08-G88-WK10-WALTER Designs / special features Grade: WK10 (uncoated carbide) Chipbreaker: G88 Form: Round Execution: X Series description: Uncoated carbide; check product matrix for workpiece suitability FAQ What materials is this insert suitable for? The ROGX1605M08-G88 WK10 insert from Walter Tools is an uncoated carbide grade intended for a broad range of applications; specific material suitability should be checked in the product matrix for this indexable milling insert. Is the ROGX1605M08-G88 WK10 coated? No, the ROGX1605M08-G88 WK10 is specified as an uncoated carbide grade (WK10) for cases where a naked cutting edge is preferred. What are the geometric dimensions of the insert? The insert is of round form with a size of 16 and a thickness code of 05, identified by SKU ROGX1605M08-G88-WK10-WALTER. How does the G88 chipbreaker affect machining? The G88 chipbreaker on the ROGX1605M08-G88 WK10 promotes controlled chip formation, which supports stable machining and improved chip evacuation in many milling operations. How precise is the fit of the insert in toolholders? The insert is manufactured to tolerance class G, providing consistent seating accuracy for reliable indexing and repeatable tool set-ups. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Trademarked names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
ROGX1605M08-G88 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp cutting geometry, tailored chip control and the proven Walter N‑series grade for efficient machining of non‑ferrous materials; this results in stable production runs and predictable results. Order the insert directly via Metav Werkzeuge or contact the technical consultants for detailed application advice. ROGX1605M08-G88 WXN15 milling insert — round form, G88 chipbreaker (Walter Tools) The ROGX1605M08-G88 WXN15 is a round milling insert designed for precise, high‑quality machining of non‑ferrous metals within the Walter N‑series range. Uncoated carbide grade WXN15 Optimised for non‑ferrous metals G88 chipbreaker for reliable chip control Round insert, size 16, thickness 05 Reliable performance for non‑ferrous machining The uncoated carbide composition of the WXN15 grade is engineered for machines working with non‑ferrous metals such as aluminium, copper and brass. An uncoated, very sharp cutting edge reduces material adhesion and smearing on soft, ductile alloys, resulting in improved surface finish and fewer interruptions for cleaning. This means fewer rejects and more consistent cycle times in series production. Consistent chip formation and process stability The G88 chipbreaker geometry provides controlled chip formation and evacuation, which is particularly important when machining sticky materials. Paired with the round insert shape, the geometry offers smooth engagement in radial milling operations and ramps, reducing vibration and promoting a stable cutting process. The adherence to tolerance class G further ensures interchangeability and repeatable positioning in indexable cutter bodies. Series compatibility and practical advantages Belonging to the Walter N‑Sortensystem, this insert combines a proven grade with production‑oriented handling. Size 16 and thickness 05 ensure compatibility with a wide range of milling cutters designed for light to medium removal rates in non‑ferrous applications. The result is an economical solution that balances tool life, surface quality and attainable metal removal rates, helping to lower overall machining costs while keeping setup complexity low. For reliable, high‑quality machining of aluminium and other non‑ferrous metals with Walter Tools inserts, contact Metav Werkzeuge to specify the correct grade and geometry for the application — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data SKU: ROGX1605M08-G88-WXN15-WALTER Label: Milling insert ROGX1605M08-G88 WXN15 Walter Tools Manufacturer: Walter Tools Facts Size: 16 Thickness: 05 Tolerance class: G Shape: Round Chipbreaker: G88 Grade: WXN15 Special features Material / grade: uncoated carbide (WXN15) Series: Walter N‑Sortensystem Application: Non‑ferrous metals (aluminium, copper, brass) Execution: X FAQ Which materials is this insert suitable for? The ROGX1605M08-G88 WXN15 is designed primarily for non‑ferrous metals such as aluminium, copper and brass, using the sharp uncoated WXN15 grade for minimal material adhesion. Is the insert coated or uncoated? This insert uses an uncoated carbide grade (WXN15), which is preferred for many non‑ferrous applications to avoid built‑up edge and material smearing. What advantages does the G88 chipbreaker offer? The G88 chipbreaker promotes controlled chip formation and reliable evacuation, improving process stability and reducing downtime caused by chip entanglement. What are the key dimensional and tolerance details? The insert is a round form with size 16, thickness 05 and manufactured to tolerance class G, ensuring consistent fitment in compatible cutter bodies. Which series and brand does this insert belong to? This insert is part of the Walter N‑Sortensystem and is supplied by Walter Tools under the designation ROGX1605M08-G88 WXN15. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ROGX2006M08-G88 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, a robust uncoated carbide grade and a compact round form for reliable milling performance; order or request application advice from Metav Werkzeuge for seamless production integration. ROGX2006M08-G88 WK10 round milling insert — 20 mm, Walter Tools The ROGX2006M08-G88 WK10 is a round milling insert designed for versatile milling tasks where consistent chip formation and predictable edge life are required Round insert, 20 mm diameter Uncoated carbide grade WK10 G88 chipbreaker for controlled chips Tolerance class G for dimensional accuracy Consistent chip control that stabilises throughput The integrated G88 chipbreaker is engineered to produce short, segmented chips that reduce re-cutting and improve evacuation in milling operations. Combined with the WK10 uncoated carbide grade, this configuration supports stable chip formation and dependable cutting behaviour across varied tasks. The practical advantage is fewer interruptions for chip clearing and a smoother process flow, which directly contributes to higher machine utilisation and predictable cycle times. Predictable accuracy and repeatable seating for finished parts The round insert geometry and tolerance class G ensure reproducible seating and repeatable cutting positions, which supports consistent component dimensions in series production. With a nominal diameter of 20 mm and plate thickness 06 mm, the insert offers a compact footprint that is suited to both confined tool pockets and modular milling heads. This results in reliable part conformity and simplified tool management in setups where repeatability is essential. Material strategy and integration advice for process security This insert is supplied in the WK10 uncoated hardmetal grade; material suitability should be verified against the detailed product matrix to match workpiece materials and cutting conditions. As the grade is uncoated, it can offer advantages in certain intermittent cuts and when thermal barrier coatings are not required. For process integration, pairing the insert with appropriate cutter bodies and optimised feeds/ speeds will yield the best balance between tool life and surface quality; where in doubt, consult the technical guidance provided by the manufacturer or Metav Werkzeuge for application-specific recommendations. Contact Metav Werkzeuge for application-specific recommendations for the Walter Tools ROGX2006M08-G88 WK10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing tool systems Technical data Article number: ROGX2006M08-G88-WK10-WALTER SKU: ROGX2006M08-G88-WK10-WALTER ISO designation: ROGX2006M08-G88 WK10 Designation (without grade): ROGX2006M08-G88 Core data Diameter: 20 mm Thickness: 06 mm Chipbreaker: G88 Tolerance class: G Special features Grade: WK10 (uncoated hardmetal) Series: Walter Schneidstoffsorte - Serie offen Plate form: Round Execution: X Material designation: Katalogabhängig Manufacturer: Walter Tools FAQ What materials is this insert suitable for? Material suitability must be confirmed via the product matrix; the ROGX2006M08-G88 WK10 is supplied in an uncoated carbide grade and its suitability depends on the specific workpiece material and cutting strategy. How does the G88 chipbreaker affect milling performance? The G88 chipbreaker promotes short, controllable chips, which improves evacuation and reduces the risk of chip entanglement, helping to maintain consistent cycle times with the ROGX2006M08-G88 WK10 insert. Can the insert be used in indexed milling heads? Yes, the round geometry and defined tolerance class G enable precise indexing and repeatable seating in modular milling heads compatible with this insert form. What are the dimensional key data for tool selection? Key dimensions are 20 mm diameter and 06 mm thickness; the ISO designation and the designation without grade can be used to match compatible cutter bodies. Is the insert coated or uncoated? This item is supplied in the WK10 grade, which is an uncoated hardmetal; coating information is categorised as catalogue-dependent and should be checked in the product specifications. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanation only; no affiliation or endorsement by the brand is implied. The offered item is an original, brand-new product from the manufacturer.
ROGX2006M08-G88 WXN15 Wendeplatten - Walter Tools
Benefit from a sharp, uncoated carbide cutting edge and a G88 chipbreaker that delivers clean chip control during machining of non‑ferrous metals; the round geometry adds versatility and reliable performance. Order the ROGX2006M08-G88 WXN15 directly via Metav Werkzeuge or ask our consultants if needed. ROGX2006M08-G88 WXN15 milling indexable insert — round insert, uncoated carbide for non‑ferrous metals | Walter Tools A round ROGX2006M08-G88 WXN15 milling insert engineered for sharp, uncoated cutting in applications focused on aluminium, copper and brass. Uncoated carbide grade WXN15 Optimised for non‑ferrous metals N Round geometry for versatile milling G88 chipbreaker for clean chips Faster, cleaner machining of non‑ferrous alloys The uncoated WXN15 grade offers a sharp cutting edge tailored for N‑class materials, reducing the tendency for material adhesion during light to medium milling operations. Thanks to the precise geometry and clean edge, the insert improves cycle stability and reduces secondary finishing. For operations where surface integrity and process repeatability matter, the combination of uncoated carbide and optimised geometry delivers efficient material removal with predictable results. Consistent chip control and surface quality The G88 chipbreaker is designed to produce short, controllable chips when cutting ductile metals. This results in improved coolant access, reduced toolnose temperature and fewer built‑up edge problems, which in turn supports a higher first‑pass yield and less manual rework. The round geometry also provides a larger contact radius, balancing edge strength and finish quality to help maintain dimensional accuracy across a wide range of pocketing and face‑milling tasks. Application focus and process reliability Intended primarily for NE‑metals, the insert performs well on non‑ferrous metals such as aluminium, copper and brass, where a very sharp, uncoated cutting edge is advantageous. The Walter N‑sort system classification signals ease of order and consistent grade allocation for workshop stocking. The tolerance class G ensures consistent form and repeatability between replacements, supporting predictable tool life and simplified process planning. Integration into production and economical handling As part of the Walter N‑Sortensystem, this round insert fits common milling bodies that accept the ROGX series format and is aimed at users seeking a pragmatic balance of cutting performance and tool economy. The geometry and chip control reduce downtime spent on clearing chips and reworking surfaces, while the uncoated grade facilitates easier resharpening or disposal procedures in automated tool management. For programmes that prioritise productivity and regular batch work, the product supports stable machining cycles and straightforward tool inventory management. The ROGX2006M08-G88 WXN15 benefits from Walter Tools' focus on consistent edge quality and reliable supply. For tailored machining recommendations on the Walter Tools ROGX2006M08-G88 WXN15 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss set‑up and compatibility with existing tooling systems Technical Data Article number: ROGX2006M08-G88-WXN15-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Grade: WXN15 Series: Walter N‑Sortensystem Execution: X Facts Plate size: 20 Plate thickness: 06 Tolerance class: G Plate form: Rund Chipbreaker: G88 Special features Uncoated carbide (WXN15) Application: Non‑ferrous metals (N) Round geometry for multi‑directional milling Sharp edge for reduced material adhesion FAQ What materials is this insert suitable for? The ROGX2006M08-G88 WXN15 is intended for machining non‑ferrous metals such as aluminium, copper and brass, consistent with the N classification. How does the G88 chipbreaker improve machining? The G88 chipbreaker produces short, manageable chips that aid coolant access and reduce built‑up edge, improving surface quality and process reliability with this insert. Is the insert coated or uncoated? This insert is an uncoated carbide grade (WXN15), providing a very sharp cutting edge that minimises material adhesion in NE‑metal applications. Can the round geometry be used for shoulder milling? Yes; the round geometry offers versatility for light‑to‑medium pocketing and face milling, delivering a compromise between edge strength and surface finish. How does Walter Tools ensure repeatability for this grade? The insert is part of the Walter N‑Sortensystem; grade allocation and tolerance class G support consistent form and predictable replacement behaviour for process planning. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ROHX0803M0-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an optimised D57 chipbreaker for stable machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application advice. ROHX0803M0-D57 WSM35G indexable milling insert — Tiger·tec Gold grade for stainless steels and superalloys | Walter Tools The ROHX0803M0-D57 WSM35G is an indexable milling insert engineered for heavy and demanding machining tasks, offering dedicated performance in the machining of stainless steels and heat‑resistant superalloys where thermal stability and secure chip formation are vital. Tiger·tec Gold coating for high thermal resistance Optimised D57 chipbreaker for controlled chips Round insert geometry for flexible entry angles Size 08, thickness 03 for compact tool setups Faster, more reliable machining of stainless steels and superalloys The Tiger·tec Gold coating combined with the WSM35G grade is developed to resist the high temperatures and poor thermal conductivity typical of stainless steels and nickel‑based superalloys. This results in improved edge stability and a lower tendency for built‑up edge formation, which in practice reduces unexpected tool changes and enhances production uptime. The round geometry supports a range of entry angles, enabling safer engagement in interrupted cuts and less sensitivity to radial run‑out, so machining cycles stay predictable and efficient. Consistent chip control and reduced process risk The dedicated D57 chipbreaker provides consistent chip formation by guiding swarf away from the cutting zone and reducing re‑cutting. For components produced from tough, ductile materials this means fewer surface defects and a reduced need for secondary operations. The coating and grade combination promotes a stable cutting edge, extending service intervals and lowering the frequency of insert replacements — a direct contribution to improved process economy and lower per‑part manufacturing cost. Practical advantages for workshop integration and tool management The insert’s compact dimensions (size 08, thickness 03) and round plate form make it straightforward to integrate into existing tool systems where space or accessibility is limited. The design emphasises predictable performance over a wide range of cutting parameters, which simplifies tooling strategies and reduces the time spent on parameter optimisation. Suppliers and production engineers will benefit from the insert’s versatility when standardising on tooling for tougher materials, helping to streamline inventory without compromising capability. For application support or to procure Walter Tools inserts such as the Tiger·tec Gold WSM35G grade, contact Metav Werkzeuge for tailored advice and supply coordination. Technical Data Article number: ROHX0803M0-D57-WSM35G-WALTER SKU: ROHX0803M0-D57-WSM35G-WALTER Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Designation: ROHX0803M0-D57 WSM35G Core data Plate form: Round Size: 08 Thickness: 03 Chipbreaker: D57 Tolerance class: H Design & features Application groups: S / M (heat‑resistant superalloys, titanium / stainless steels) Coating technology: Tiger·tec Gold (coated cemented carbide) Execution: X Suitable for: machining of stainless steels and heat‑resistant alloys FAQ What materials can this insert machine effectively? The ROHX0803M0-D57 WSM35G insert is suitable for stainless steels and heat‑resistant superalloys (material groups M and S), offering enhanced thermal resistance and secure chip formation. What is the benefit of the D57 chipbreaker? The D57 chipbreaker delivers controlled chip formation and reliable swarf evacuation, reducing the risk of re‑cutting and improving surface integrity when machining ductile or temperature‑sensitive materials. How does the Tiger·tec Gold coating affect tool life? Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and protects the cutting edge, which supports longer intervals between insert changes and steadier performance under elevated cutting temperatures. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product of the manufacturer.
ROHX0803M0-D67 WSM35G WSM35G Wendeplatten - Walter Tools
High thermal resistance from the Tiger·tec Gold coating and a WSM35G grade designed for stainless steels and superalloys combine to extend cutting edge life and maintain process stability; the round geometry with D67 chipbreaker improves chip control in interrupted cuts. Order the ROHX0803M0-D67 WSM35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ROHX0803M0-D67 WSM35G — Milling indexable insert (round, D67) by Walter Tools A ROHX0803M0-D67 WSM35G milling insert engineered for productive machining of rostfreie Stähle and heat‑resistant superalloys, optimised for demanding milling operations where edge stability and chip control are critical Tiger·tec Gold coating for extended life Optimised chip control D67 geometry Round form improves interrupted cutting stability H tolerance class for consistent fit Greater uptime through coating and grade technology The combination of the Tiger·tec Gold coating and the WSM35G coated‑carbide grade delivers a reliable balance of thermal resistance and edge strength. This design reduces the risk of premature edge wear when machining rostfreie Stähle (stainless steels) and superalloys/titanium, helping to maintain consistent cutting performance across long production runs. The coating technology is tuned to support stable chip formation and minimise adhesion at the cutting edge, which translates into fewer tool changes and more productive machining cycles. Stable cutting in interrupted and heavy cuts The round plate form with the D67 chipbreaker offers improved stability in interrupted milling and work on irregular surfaces. The geometry promotes controlled chip evacuation and prevents chip packing that can otherwise compromise surface finish or damage the insert. Combined with the H tolerance class, the insert ensures consistent seating and repeatable positioning in the cutter body, supporting reliable part quality and predictable tool life under varying cut conditions. Practical benefits for workshop integration Selection of the ROHX0803M0-D67 WSM35G is particularly suitable where a cost‑effective, durable solution is needed for difficult‑to‑machine materials. The insert’s specification supports process security and simple tool management: coated carbide performance reduces frequency of indexing, the round shape broadens application flexibility, and the chipbreaker geometry lowers the risk of built‑up edge. For mixed production that includes rostfreie Stähle and heat‑resistant alloys, this insert helps to streamline inventory while maintaining consistent component quality. Contact Metav Werkzeuge today for application advice and current availability of Walter Tools Tiger·tec Gold inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ROHX0803M0-D67-WSM35G-WALTER SKU: ROHX0803M0-D67-WSM35G-WALTER Product: Milling indexable insert Type designation: ROHX0803M0-D67 WSM35G Series: Tiger·tec Gold Grade: WSM35G Form: Round Size designation: 08 Plate thickness: 03 Chipbreaker: D67 Tolerance class: H Manufacturer: Walter Tools Facts Size: 08 Thickness: 03 Tolerance: H Material groups: S / M Special features Coated carbide grade (Tiger·tec Gold technology) Suitable for rostfreie Stähle (stainless steels) Applicable to heat‑resistant superalloys and titanium Round geometry for interrupted cutting stability Optimised chip control via D67 chipbreaker Designed for repeatable seating and process security FAQ What materials is this insert suited for? The ROHX0803M0-D67 WSM35G insert is designed for rostfreie Stähle (stainless steels) and is also suitable for heat‑resistant superalloys and titanium, reflecting the WSM35G grade characteristics. How does the D67 chipbreaker affect performance? The D67 chipbreaker promotes controlled chip formation and evacuation; in combination with the round form it improves stability during interrupted cuts and reduces the likelihood of chip re‑cutting. Is this insert compatible with standard round cutter bodies? Yes, the round plate form and H tolerance class support secure and repeatable seating in compatible round cutter bodies designed for this insert designation. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold coating enhances thermal resistance and wear performance on demanding materials, extending edge life and supporting consistent surface quality over longer tool life. Can the insert handle heavy feed rates? The coated carbide grade and robust geometry are intended to maintain cutting edge stability under higher mechanical and thermal loads, making the insert suitable for productive milling strategies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification purposes only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, brand‑new product from the manufacturer Walter Tools.
ROHX0803M04-A57 WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective coated carbide, precise round geometry and a reliable chipbreaker for consistent milling results and reduced downtime. Order the insert directly via Metav Werkzeuge or request expert consultation for material-specific selection. ROHX0803M04-A57 WHH15X indexable milling insert by Walter Tools — round geometry, chipbreaker A57 ROHX0803M04-A57 WHH15X is an indexable milling insert designed for general face and contour milling applications where reliable chip control and repeatable positioning are required Coated carbide grade WHH15X Round insert, size 08, thickness 03 Chipbreaker A57 for stable chips Tolerance class H for repeatability Productive milling with consistent results The indexable milling insert delivers a balance between wear resistance and process security. The WHH15X grade indicates a coated carbide composition optimised for general-purpose milling; the coating improves surface integrity and extends tool life under standard cutting conditions. The insert’s round geometry supports versatile engagement angles and reduces the need for multiple specialised shapes, enabling stable performance during trochoidal or plunge passes. With chipbreaker A57, the insert controls chip formation to minimise re-cutting and protect the machined surface, which helps to reduce secondary operations and rework. The combination of these features supports higher throughput and reliable cycle times on production lines. How chip control and tolerance increase process security Stable chip formation is a core element of process reliability: the chipbreaker A57 breaks chips into manageable segments, lowering the risk of chip entanglement and improving evacuation. The tolerance class H ensures consistent seat fit and repeatable positioning in the cutter body, which reduces variation between indexed edges and simplifies quality control routines. Where surface finish and dimensional repeatability are priorities, the coated carbide substrate contributes to reduced flank wear and consistent cutting-edge behaviour. For engineers and process planners, these technical attributes translate into fewer unexpected tool changes, improved machine uptime and better overall process economics. Integration into tool systems and material suitability The insert is specified as ROHX0803M04-A57 in Walter Tools’ range and fits cutters designed for round inserts of size 08 and thickness 03. Its open series classification (Walter Schneidstoffsorte - Serie offen) means the grade selection is adaptable across a range of toolholders; however, workpiece material suitability should be checked in the manufacturer’s product matrix before application. The insert’s design supports straightforward indexing and secure clamping, contributing to fast set-ups and predictable maintenance intervals. Overall, the geometry and grade combination aids in achieving a reliable balance between surface quality and productive metal removal rates in volume production. For a technical assessment tailored to specific workpiece materials and cutter bodies, contact Metav Werkzeuge for advice or to arrange supply of the Walter Tools ROHX0803M04-A57 WHH15X insert: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: ROHX0803M04-A57-WHH15X-WALTER Product type: Indexable milling insert Designation: ROHX0803M04-A57 WHH15X Manufacturer: Walter Tools Facts Size: 08 Thickness: 03 Chipbreaker: A57 Tolerance class: H Shape: Round Special features Coating/type: coated carbide (WHH15X) Series: Walter Schneidstoffsorte - Serie offen Baureihe: Walter Schneidstoffsorte - Serie offen Application note: Workpiece material suitability to be checked in product matrix FAQ What materials is this insert suited for? The answer depends on the Walter Tools product matrix; the ROHX0803M04-A57 WHH15X is a coated carbide grade intended for general milling tasks, but specific material compatibility should be verified against the manufacturer’s guidance. How does the chipbreaker A57 affect machining? The chipbreaker A57 promotes short, controllable chips that improve evacuation and reduce the risk of chip-related damage, enhancing surface finish and operational safety with the insert. Can the insert be indexed multiple times? Yes, the round indexable milling insert is designed for multiple edge indexes; consistent performance is supported by the tolerance class H for repeatable seating in the toolholder. Is this insert suitable for high-volume production? The combination of coated carbide grade WHH15X, controlled chip formation and a repeatable fit makes the insert appropriate for serial milling where uptime and predictable tool life are required. What should be checked before selecting this insert for an application? Consult the Walter Tools product matrix to confirm the WHH15X grade suitability for the intended workpiece material and cutting conditions; compatibility with the cutter body and clamping system should also be verified. Protected trademarks and product names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no connection between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ROHX0803M04-A57 WKK25G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and a coated cemented‑carbide substrate for predictable wear resistance and improved productivity; optimised for machining cast iron, the ROHX0803M04‑A57 WKK25G delivers consistent chip control and stable cutting performance — order the ROHX0803M04‑A57 WKK25G directly via Metav Werkzeuge or ask our consultants if needed. ROHX0803M04-A57 WKK25G — Milling indexable insert, Tiger‑tec Gold, for cast iron (Walter Tools) The ROHX0803M04-A57 WKK25G is a round milling insert engineered for efficient roughing and semi‑finishing of cast iron, using Walter Tools’ Tiger‑tec Gold technology to combine abrasion resistance with reliable chip formation. Tiger‑tec Gold coating for extended tool life Optimised for cast iron machining Round insert geometry for stable engagement Chipbreaker A57 for short, controlled chips Maximise cutting performance on cast iron The Tiger‑tec Gold coating paired with a coated cemented‑carbide substrate provides enhanced abrasion resistance and thermal stability under intermittent cutting typical of cast‑iron work. This combination reduces flank wear and extends service intervals, resulting in fewer tool changes and improved machine uptime. The insert’s construction suits the brittle, short‑chip behaviour of cast iron and is tailored to maintain consistent cutting conditions across batches, supporting higher productivity and reproducible results. Stable chip control reduces interruptions The A57 chipbreaker and round insert geometry are designed to produce short, manageable chips when machining cast iron, which lowers the risk of chip entanglement and tool damage. Improved chip control also helps maintain a reliable surface finish and reduces the need for secondary cleaning operations. For operations where tooling stability and predictable chip flow determine process reliability, this insert offers a measurable improvement in cycle consistency and operator safety. Economic benefits through predictable tool life With tolerance class H and the Tiger‑tec Gold series’ focus on wear performance, this insert supports productive machining and easier process planning. The coated insert demonstrates balanced performance between wear resistance and edge robustness, making it suitable for demanding production environments that require repeatable results. Walter Tools’ design emphasises broad material coverage for cast‑iron applications, which helps reduce tool variants in the tool crib and simplifies tool inventory management. Discuss application suitability and ordering options with Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast availability Technical data Article number: ROHX0803M04-A57-WKK25G-WALTER SKU: ROHX0803M04-A57-WKK25G-WALTER Label: Fräswendeschneidplatte ROHX0803M04-A57 WKK25G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core measurements Insert size: 08 Plate thickness: 03 Chipbreaker designation: A57 Tolerance class: H Materials & features Coating/series: Tiger‑tec Gold (coated cemented carbide) Grade/sort: WKK25G Insert form: Round Substrate/application: optimised for cast iron (ISO group K) Execution: X FAQ What materials is this insert suited for? The ROHX0803M04‑A57 WKK25G is optimised for cast iron machining and is formulated to handle the abrasive wear and short‑chip behaviour typical of these materials. What does the A57 chipbreaker provide? Chipbreaker A57 offers controlled, short chips in interrupted and continuous cuts, improving process stability and reducing chip management issues during cast‑iron milling. How does Tiger‑tec Gold improve tool life? Tiger‑tec Gold coating enhances abrasion resistance and thermal stability for the coated cemented‑carbide substrate, which translates into longer, more predictable tool life under typical cast‑iron cutting conditions. Is this insert suitable for finishing operations? The round geometry and A57 chipbreaker are primarily targeted at stable roughing and semi‑finishing; for tight‑tolerance finishing, selection of an application‑specific geometry is recommended. Which Walter Tools range does this insert belong to? This insert is part of the Tiger‑tec Gold series and carries the WKK25G grade, designed for robust performance on cast‑iron workpieces. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer. The product references Walter Tools where applicable. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ROHX0803M04-A57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G carbide grade for consistent productivity in machining Stahl and Gusseisen; the round geometry and A57 chipbreaker deliver stable chip control and versatile cutting directions. Order directly via Metav Werkzeuge or consult the application specialists for tooling layout and optimisation. ROHX0803M04-A57 WKP35G milling indexable insert — Tiger·tec Gold, for Stahl and Gusseisen — Walter Tools A ROHX0803M04-A57 WKP35G indexable milling insert engineered for high-productivity machining of Stahl and Gusseisen, offering a coated carbide grade optimised for wear resistance and stable cutting performance. Tiger·tec Gold coating for extended tool life WKP35G coated carbide for Stahl and Gusseisen A57 chipbreaker for stable, predictable chips Round 08 insert with tolerance class H precision Higher productivity through a hardened coating system The combination of the Tiger·tec Gold coating and the WKP35G grade provides a measurable improvement in wear resistance and edge stability under mixed and interrupted cuts. Coated carbide substrates reduce flank and crater wear, which maintains cutting geometry for longer periods and thus extends tool life. For shops focused on cycle-time reduction, this insert’s coating technology translates directly into fewer tool changes and more uptime during serial or batch production, improving process efficiency without sacrificing component quality. Predictable chip formation and surface quality The A57 chipbreaker is designed for reliable chip control when machining Stahl and Gusseisen, producing short, controllable chips that evacuate easily from the cut. The round insert form increases indexability and allows multi-directional cutting strategies, ideal for trochoidal or roughing passes where engagement angles vary. Consistent chip behaviour supports steady cutting forces and helps achieve a stable surface finish with reduced risk of built-up edge, benefiting both roughing and semi-finishing operations. Robust seating accuracy and flexible machine integration Tolerance class H and the insert’s dimensional specification (size 08, thickness 03) ensure a repeatable fit in standard toolholders and predictable runout behaviour. The ROHX0803M04-A57 ISO designation and the clear execution code support straightforward tool management and reordering in production environments. With a focus on process reliability, the insert integrates easily into existing tool systems and is suitable for both conventional and high-efficiency milling strategies where consistent tool performance is required. For tailored application advice or to arrange supply of Walter Tools ROHX0803M04-A57 WKP35G inserts, contact Metav Werkzeuge for expert support at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: ROHX0803M04-A57-WKP35G-WALTER Description: Fräswendeschneidplatte ROHX0803M04-A57 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Core specifications Size designation: 08 Thickness: 03 Tolerance class: H Shape: Round Chipbreaker: A57 Applicable material groups: P (Stahl), K (Gusseisen) Features and coatings Grade: WKP35G Coating technology: Tiger·tec Gold Substrate type: Coated carbide Execution: X ISO designation: ROHX0803M04-A57 WKP35G FAQ Which materials are suitable for this insert? The insert is specified for machining Stahl (ISO group P) and Gusseisen (ISO group K); the WKP35G grade and Tiger·tec Gold coating are tuned to handle the heat and abrasive wear typical for these groups. What is the purpose of the A57 chipbreaker? The A57 chipbreaker promotes short, consistent chips for stable evacuation and reduced risk of chip-related interference, improving safety and surface integrity during milling. Is the insert indexable in multiple orientations? Yes, the round geometry provides multi-directional indexability, enabling different cutting approaches and extending usable edge count compared with single-orientation inserts. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold enhances wear resistance and thermal stability of the coated carbide, which helps maintain edge geometry under continuous cutting and reduces the frequency of tool changes. What does tolerance class H mean for assembly? Tolerance class H indicates a precise and consistent fit into the cutter pocket, ensuring repeatable seating and reduced variability in runout and cutting performance. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX0803M04-D57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coated grade, optimised chip control and a compact round geometry for dependable steel machining; the result is higher productivity and reduced tool changes. Order the insert directly via Metav Werkzeuge or consult our specialists for machining advice. ROHX0803M04-D57 WPP35G milling insert – Tiger·tec Gold, for steel (Walter Tools) The ROHX0803M04-D57 WPP35G is a round milling indexable insert for ISO P (steel) applications, offering a coated-carbide grade tuned for high wear resistance and reliable chip control. Tiger·tec Gold coating for long tool life Optimised chipformer D57 for reliable chip control Round insert Ø08 for flexible milling applications Designed for machining steel (ISO P) with high wear resistance Longer production runs with consistent surface quality The Tiger·tec Gold coating combined with a WPP35G grade of coated carbide delivers measurable increases in wear resistance and maintains a stable cutting edge over extended cycles. This results in fewer indexings and predictable tool-change intervals, which supports continuous operation and planning. For shops machining steel components, the insert’s composition is optimised for the heat and chip formation typical of ISO P materials, helping to preserve part tolerances and reduce scrap rates. The compact round insert geometry also enables straightforward engagement strategies in peripheral and face milling operations. Predictable chip control reduces downtime and improves safety An optimised chipformer (D57) governs chip shape and evacuation, reducing the risk of built-up edge and tool-induced vibration. Controlled chips mean less operator intervention and safer swarf management, particularly on medium to heavy cuts in unalloyed and alloyed steel. The round format and modest cutting edge allow stable cutting conditions and simplified toolpath strategies, which benefit both programmed and manual setups. Clear chip behaviour shortens cycle times through higher average cutting parameters while lowering the frequency of stoppages for chip clearance. Versatile geometry for a range of milling tasks The insert’s round form and the labelled Ø08 / thickness 03 geometry provide flexibility across slotting, shoulder milling and light ramping operations. The grade is categorised for a balance between toughness and wear performance, marked by classifications that favour tenacious behaviour where interrupted cuts or variable material batches are encountered. Tooling systems using this insert gain from a combination of edge robustness and an efficient coating technology, enabling stable performance on demanding production runs without sacrificing surface finish. Practical support and application guidance For machining parameter suggestions, recommended feed and speed ranges, or to confirm suitability for a specific steel grade, Metav Werkzeuge offers application support and rapid consultation. Shared experience with similar tooling and material pairings can shorten the trial phase and accelerate process stabilisation. Contact options are available for detailed queries, including machining strategies for high-removal tasks or fine finishing operations. For tailored machining recommendations and immediate availability of the Walter Tools ROHX0803M04-D57 WPP35G milling insert, contact Metav Werkzeuge for expert advice and rapid delivery options Technical Data SKU: ROHX0803M04-D57-WPP35G-WALTER Article designation: ROHX0803M04-D57 WPP35G Product type: Fräswendeschneidplatte / milling insert Series: Tiger·tec Gold Grade: WPP35G Form: Round Size: 08 Chipformer: D57 Plate thickness: 03 Execution: X Material group: P (Steel) Tolerance class: H Facts Ø designation: 08 Thickness designation: 03 Tolerance class: H Special features Coating: Tiger·tec Gold Substrate: coated carbide (WPP35G) Application: Steel (ISO P) Shape: round insert for flexible engagement Chip control: optimised D57 chipformer Brand: Walter Tools FAQ What materials is this insert suitable for? The ROHX0803M04-D57 WPP35G insert is formulated for machining steel (ISO P) and performs well on unalloyed and alloyed steels typical of ISO group P. Which coating and grade does the insert use? This insert uses the Tiger·tec Gold coating and the WPP35G grade, a coated-carbide solution designed to balance wear resistance and toughness. How does the D57 chipformer help in production? The D57 chipformer shapes chips for easier evacuation, promoting consistent cutting conditions, fewer stoppages and improved surface integrity during steel milling. Is the round geometry suitable for interrupted cuts? Yes, the round form and the WPP35G grade offer good toughness and edge stability, making the insert a robust choice for interrupted or unstable cuts in steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ROHX0803M04-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the high edge stability of the Tiger‑tec Gold grade and the reliable chip control of the D57 breaker for efficient machining of stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application support. ROHX0803M04‑D57 WSM35G — indexable milling insert, Tiger‑tec Gold, Walter Tools The ROHX0803M04‑D57 WSM35G is an indexable milling insert designed for productive machining of difficult‑to‑cut materials, offering a round geometry with a D57 chipbreaker for controlled chip formation in stainless steel and superalloys. Tiger‑tec Gold coating for edge stability Optimised for stainless steel and superalloys Round insert with D57 chipbreaker Tolerance H; size 08, thickness 03 Longer tool life through robust coating and grade selection The combination of the Tiger‑tec Gold technology and the WSM35G grade provides a balance between wear resistance and fracture toughness, which directly reduces tool change frequency and machine downtime. For components in stainless steel and other demanding alloys, a coated cemented carbide grade like this supports stable cutting edges under elevated temperatures and adhesive wear conditions. This means fewer interruptions in production and a more predictable tool lifecycle, which enhances process planning and cost control in milling operations. Predictable chip formation and process reliability The D57 chipbreaker in a round insert geometry promotes controlled chip segmentation and evacuation during interrupted or difficult cuts, improving surface finish consistency and reducing the risk of built‑up edge. The insert’s geometry and chipbreaker work together to manage heat and fragmentation, helping to maintain a stable cutting regime when machining materials that otherwise tend to produce long, stringy chips. Such chip control contributes to safer handling and more reliable cycle times on milling centres. Easy specification and integration into existing tool systems With clearly defined dimensions — size 08 and thickness 03 — and tolerance H, this insert fits into standard indexable milling toolholders that accept the ROHX series geometry. The designation and geometry simplify procurement and inventory management, while the grade’s focus on superalloys and stainless steel reduces the need for multiple specialised inserts. As a result, workshop logistics are streamlined and setup times are shortened, supporting efficient batch production and flexible job changes. For machining demanding alloys, contact Metav Werkzeuge for tailored advice on Walter Tools' ROHX0803M04‑D57 WSM35G and secure optimal tool selection and delivery. Technical data Article number: ROHX0803M04‑D57‑WSM35G‑WALTER Designation: ROHX0803M04‑D57 WSM35G Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 03 Tolerance class: H Plate form: Round Chipbreaker: D57 Special features Series: Tiger‑tec Gold Grade: WSM35G Execution / geometry: X Material application: S / M Suitable for stainless steel (M) and heat‑resistant alloys / titanium (S) FAQ What materials is this insert best suited for? The ROHX0803M04‑D57 WSM35G insert is formulated for stainless steel (group M) and for heat‑resistant superalloys and titanium (group S), taking advantage of the Tiger‑tec Gold grade for stable cutting. How does the D57 chipbreaker improve machining performance? The D57 chipbreaker promotes controlled chip segmentation and evacuation, which helps maintain surface quality and reduces the likelihood of built‑up edge when using the ROHX0803M04‑D57 WSM35G in interrupted or difficult cuts. Which toolholders accept this round insert geometry? Round inserts with the ROHX series geometry are compatible with indexable milling holders specified for the ROHX designation; ensure the holder accepts size 08 and thickness 03 to secure correct seating and tolerance fit. Is the grade suitable for high‑temperature cutting conditions? Yes, the WSM35G grade within the Tiger‑tec Gold family is designed to withstand the thermal and mechanical stresses common when machining stainless steel and superalloys, improving edge life under demanding conditions. How does tolerance class H affect assembly and accuracy? Tolerance class H provides a defined fit for repeatable seating and consistent tool runout, supporting dimensional stability across serial production when the insert is used in correctly specified toolholders. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ROHX0803M04-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger·tec Gold coating, robust round geometry and broad material versatility for reliable milling performance and reduced tool-change downtime. Order the insert directly via Metav Werkzeuge or contact our consultants for technical support and application advice. ROHX0803M04-D57 WSP45G milling insert — Tiger·tec Gold, P/M/S capability, Walter Tools The ROHX0803M04-D57 WSP45G is a round milling insert optimised for versatile operations in steel, stainless steel and heat‑resistant alloys, combining a resilient geometry with a PVD coating designed for demanding milling tasks Tiger·tec Gold coating for extended life Round geometry for high edge strength Suitable for steel, stainless steel, superalloys Stable chip control with D57 breaker Consistent productivity through a hardened coating system The core advantage of the insert lies in its Tiger·tec Gold PVD coating applied to a high‑performance substrate. This combination raises productivity by preserving the cutting edge under thermally demanding conditions typical of steel machining. The coating reduces flank wear and supports longer cutting windows, which translates into fewer index changes and lower process interruptions. For engineers, this means more predictable tool life and easier process planning. Reliable chip formation and reduced rework risk The round format and dedicated chipbreaker ensure dependable chip control during interrupted and slot milling. The D57 chipbreaker is crafted to manage continuous chips and to reduce tendency for built‑up edge on sticky materials. A round insert provides superior corner strength compared with polygonal geometries, lowering the chance of corner chipping and keeping surface quality consistent across a range of feed and depth settings. Repeatable accuracy and mechanical compatibility Manufactured to tolerance class H, the insert is dimensionally consistent for secure seat engagement and repeatable geometry after indexing. Its dimensions (plate size 08, thickness 03) match many common milling holders, allowing easy integration into existing tool systems. As an indexable insert, it allows several cutting edges per component, reducing tooling expenditure and machine downtime while maintaining machining accuracy. Broad material coverage for mixed‑batch production Designed for P/M/S applications, the grade handles unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. The WSP45G grade balances toughness and wear resistance, making it suitable for shops that run diverse materials without changing the insert type frequently. Where machining schedules require flexibility, this insert provides a pragmatic compromise between edge stability and wear protection. For straightforward selection or application support of Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and to arrange supply of the ROHX0803M04-D57 WSP45G by Walter Tools Technical Data Article number: ROHX0803M04-D57-WSP45G-WALTER Designation: ROHX0803M04-D57 WSP45G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 08 Plate thickness: 03 Chipbreaker: D57 Tolerance class: H Special features Series: Tiger·tec Gold Sort: WSP45G Format: Round Material suitability: P/M/S Execution: X FAQ Which materials can be machined with this insert? The insert is suitable for steels, stainless steels and heat‑resistant superalloys (P/M/S); the WSP45G grade is formulated for balanced performance across these groups. What advantages does the Tiger·tec Gold coating offer? The Tiger·tec Gold PVD coating provides improved wear resistance and thermal stability, supporting longer tool life and more consistent surface finish in milling applications. Is the round geometry better for interrupted cuts? Yes, the round insert geometry increases corner strength and reduces the risk of chipping during interrupted milling, contributing to more reliable performance in challenging operations. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are cited for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise of the manufacturer.
ROHX0803M04-D67 WSP45G Wendeplatten - Walter Tools
ROHX0803M04-D67 WSP45G Fräswendeschneidplatte von Walter Tools ROHX0803M04-D67 WSP45G bietet zähe, vielseitige Schneidstoffleistung für Fräsanwendungen an Stahl, rostfreiem Stahl und hitzebeständigen Superlegierungen ROHX0803M04-D67 WSP45G von Walter Tools Tiger·tec Gold Beschichtung für hohe Prozesssicherheit Geeignet für Stahl, rostfreier Stahl und Superlegierungen Rundplatte Ø08 mit Spanbrecher D67 für stabile Spanformung Beschichtetes Hartmetall, robuste Schneidkantenstabilität Maximale Produktivität bei anspruchsvoller Fräsbearbeitung Die ROHX0803M04-D67 WSP45G Wendeschneidplatte kombiniert beschichtetes Hartmetall mit der Tiger·tec Gold Beschichtung, was zu hoher Prozesssicherheit und anhaltender Standzeit führt. Durch die optimierte Beschichtung werden Schnittkräfte reduziert und die Schneidkante gegen thermische Belastung geschützt. Das Ergebnis ist eine konstante Oberflächenqualität bei Serienbearbeitung und geringere Ausfallzeit durch Werkzeugwechsel. Anwender profitieren von planbaren Werkzeugkosten und stabilen Prozessparametern. Vielseitige Werkstoffabdeckung und sichere Spanbildung Die Sorte ist speziell für die Werkstoffgruppen P, M und S ausgelegt. Das bedeutet: sichere Zerspanung von Stahl, zuverlässige Bearbeitung von rostfreiem Stahl und robustes Arbeiten an hitzebeständigen Superlegierungen oder Titan. Der Spanbrecher D67 fördert eine kontrollierte Spanform und reduziert Aufbauschneiden, was gerade bei zähen Werkstoffen die Fertigungsqualität erhöht. Diese Kombination unterstützt prozesssichere Frässtrategien mit reproduzierbaren Ergebnissen. Einfache Integration in Produktionsprozesse Die runde Plattenform mit Größe 08 und Dicke 03 erlaubt flexible Einsatzbilder, von Schruppen bis Schlichten. Die Ausführung X und die Toleranzklasse H sorgen für wiederholgenaue Positionierung im Werkzeughalter. Anwender erhalten damit eine wirtschaftliche Lösung für Multi-Tasking-Maschinen und Serienfertigung. Technische Teams profitieren von klaren Ersatzzyklen und reduzierten Maschinenstillstandszeiten durch die längere Lebensdauer der Schneidkante. Bestellen Sie die ROHX0803M04-D67 WSP45G Fräswendeschneidplatte von Walter Tools direkt über Metav Werkzeuge oder klären Sie Anwendungsfragen per E‑Mail an info@metav-werkzeuge.com bzw. telefonisch unter +49 2822 7131930 Technische Daten Artikelnummer: ROHX0803M04-D67-WSP45G-WALTER Hersteller: Walter Tools Baureihe: Tiger-tec Gold Sorte: WSP45G Bezeichnung: ROHX0803M04-D67 Produkttyp: Fräswendeschneidplatte Plattenform: Rund Plattengröße: 08 Plattendicke: 03 Spanbrecher: D67 Ausführung: X Toleranzklasse: H Fakten Plattengröße: 08 Plattendicke: 03 Besonderheiten Beschichtung: Tiger·tec Gold (PVD-Beschichtung) Schneidstoffklasse: beschichtetes Hartmetall Bearbeitbare Werkstoffe: P: Stahl (unlegiert/legiert) Bearbeitbare Werkstoffe: M: rostfreier Stahl (zäh, hohe Wärmeentwicklung) Bearbeitbare Werkstoffe: S: hitzebeständige Superlegierungen / Titan Material WPL: P / M / S FAQ Welche Werkstoffe lassen sich mit der ROHX0803M04-D67 WSP45G bearbeiten? Die ROHX0803M04-D67 WSP45G von Walter Tools ist für die Werkstoffgruppen P, M und S ausgelegt und bearbeitet damit Stahl, rostfreien Stahl sowie hitzebeständige Superlegierungen und Titan zuverlässig. Für welche Fräsaufgaben eignet sich die Tiger·tec Gold Sorte WSP45G besonders? Die WSP45G Sorte im Tiger·tec Gold System ist besonders geeignet für vielseitige Fräsaufgaben, bei denen Prozesssicherheit und Standzeit wichtig sind, etwa Schruppen und Schlichten in Serienfertigung. Welchen Vorteil bringt der Spanbrecher D67? Der Spanbrecher D67 unterstützt eine kontrollierte Spanbildung, reduziert Aufbauschneiden und verbessert die Oberflächenqualität bei zähen Werkstoffen. Wie wird die Plattenform und -größe am besten eingesetzt? Runde Platten in Größe 08 bieten Flexibilität bei unterschiedlichen Schnittbedingungen und lassen sich in gängigen Fräswerkzeughaltern mit Ausführung X einsetzen. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ROHX10T3M0-D57 WKP35S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated grade and a robust round form delivers consistent wear resistance and reliable chip control for steel and cast iron machining; order via Metav Werkzeuge or request technical advice to integrate the insert into existing toolholders. ROHX10T3M0-D57 WKP35S – Round milling insert (T3 thickness, D57 chipbreaker) by Walter Tools The ROHX10T3M0-D57 WKP35S is a round, coated carbide milling insert engineered for efficient machining of steel and cast iron in continuous and interrupted milling operations. Tiger·tec Silver coating for long life Round geometry for full-circle milling Suitable for steel (P) and cast iron (K) T3 thickness for stable tool engagement Proven wear resistance for demanding ferrous applications The WKP35S grade, featuring Tiger·tec Silver coating, is formulated to extend edge life under the thermal and mechanical loads typical when machining steel and cast iron. The coating reduces adhesive and abrasive wear while the substrate maintains toughness; this combination delays flank and crater wear, which translates into fewer tool changes and higher uptime. For users transitioning from uncoated grades, the coating’s effect is most noticeable in reduced edge degradation during longer cycle times, enhancing process stability and predictable tool life. Geometry and chip control that support productive milling A round insert with chipbreaker D57 provides smooth engagement and consistent chip formation across a variety of cutting conditions. The continuous cutting edge of a round form suits trochoidal or full-circle milling, allowing plunge and ramping strategies with reduced vibration risk. The T3 thickness contributes to rigidity at the cutting edge and helps maintain dimensional stability under load. The chipbreaker’s role is to break and evacuate chips reliably; for operators less familiar with chipforming terminology, this means cleaner swarf management and reduced risk of re-cutting chips. Practical integration into production and tool systems Built to the ROHX10T3M0-D57 geometry and tolerance class H, the insert is compatible with toolholders designed for round indexable plates in the 10 mm size range. The Tiger-tec Silver series emphasises process security and repeatability, enabling consistent surface finish and extended intervals between indexing. Specification-based selection is recommended: the grade is intended for ISO material groups P (steel) and K (cast iron), so matching cutting data and coolant strategy to these material classes will maximise performance. For flexible scheduling, the insert’s robustness supports serial production as well as mixed-batch environments. For high process reliability with Walter Tools’ Tiger·tec Silver grade, contact Metav Werkzeuge for application guidance and to arrange supply of the ROHX10T3M0-D57 WKP35S insert through Metav Werkzeuge’s sales team (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data SKU: ROHX10T3M0-D57-WKP35S-WALTER Article designation: ROHX10T3M0-D57 WKP35S Manufacturer: Walter Tools Product type: Milling indexable insert (round) Facts Insert shape: Round Size: 10 Thickness: T3 Chipbreaker: D57 Tolerance class: H Special features Grade: WKP35S (Tiger·tec Silver coated carbide) Applicable materials: steel (P) and cast iron (K) Series: Tiger-tec Silver Form: Round insert FAQ What materials is this insert suited for? The ROHX10T3M0-D57 WKP35S is intended for steel (ISO group P) and cast iron (ISO group K), with the WKP35S grade optimised for those material behaviours. How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating reduces abrasive and adhesive wear on the cutting edge, improving life and stability of the cutting geometry under the thermal loads typical in steel and cast iron machining. Is the round shape suitable for trochoidal milling? Yes, the round geometry supports trochoidal and full-circle milling strategies and provides a continuous cutting edge for smoother tool engagement. What does chipbreaker D57 achieve in practice? Chipbreaker D57 manages chip formation to produce shorter, controllable swarf, which eases evacuation and lowers the risk of chip re-cutting during the operation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the named manufacturer.
ROHX10T3M0-D57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP35G grade for consistent, economical steel machining; the round design with D57 chipbreaker promotes reliable chip control and longer tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. ROHX10T3M0-D57 WPP35G indexable milling insert – Tiger‑tec Gold (steel) · Walter Tools The ROHX10T3M0-D57 WPP35G is a round indexable milling insert designed for productive steel machining, combining a coated carbide grade with a D57 chipbreaker for controlled chips and stable cutting. Tiger·tec Gold coated carbide Optimised for steel (ISO P) Round insert, 10 mm diameter D57 chipbreaker for reliable chips Stable cutting performance with Tiger‑tec Gold for steel The combination of the Tiger‑tec Gold coating and the WPP35G grade yields a coated carbide structure that resists wear and maintains a stable cutting edge under the thermal and mechanical loads typical of steel machining. Coating technology reduces flank wear and improves lubricity at the cutting zone, which results in more consistent performance across serial production. The insert’s metallurgy and coating are engineered to manage heat and abrasion effectively, translating into predictable tool life and fewer unplanned tool changes for production planning. Consistent chip control and surface quality through the D57 chipbreaker The D57 chipbreaker is designed to form short, manageable chips when cutting steel, reducing the risk of entanglement and promoting steady evacuation from the cutting zone. Controlled chip formation supports a better surface finish and lowers the incidence of rework. The round geometry contributes to even distribution of cutting loads across the edge, which helps maintain dimensional stability in interrupted cuts and heavy engagement conditions. For process engineers, this means improved cycle-time reliability and fewer disturbances during automated or manual milling operations. Practical dimensions and tolerance for secure clamping and repeatability With a nominal 10 mm diameter and T3 thickness, the insert suits toolholders that accept ROHX-design inserts and offers a clear specification for fixture and inventory management. The tolerance class H indicates a production standard that supports interchangeability and repeatable seating in the pocket. The round plate form simplifies indexing and rotation, allowing several usable edges before replacement. These attributes make the insert a practical choice for workshops seeking predictable changeover procedures and reduced handling complexity. Application range, economy and process benefits Specified for material group P (steel) according to ISO guidance, the grade is balanced for a mix of wear resistance and toughness suitable for unalloyed and alloyed steels. The WPP35G grade delivers a compromise between longevity and ductility that favours a wide range of feed and speed settings, helping to reduce tooling variants in stock. Over time, the combination of coating, chip control and robust grade contributes to lower cost per component through fewer replacements and less machine downtime, supporting continuous, productive milling operations. Contact Metav Werkzeuge for availability, application recommendations and batch pricing: info@metav-werkzeuge.com · +49 2822 7131930 — technical consultants are available to advise on insert selection and process parameters Technical data SKU: ROHX10T3M0-D57-WPP35G-WALTER Article designation: ROHX10T3M0-D57 WPP35G Product type: indexable milling insert Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Diameter: 10 Thickness: T3 Chipbreaker: D57 Tolerance class: H Grade: WPP35G Special features Coated carbide Optimised for steel (ISO P) Round plate form Ausführung: X Suitable for serial and versatile milling applications FAQ Which materials can this insert machine most effectively? The ROHX10T3M0-D57 WPP35G is formulated for material group P (steel) and is suitable for unalloyed and alloyed steels, offering a balance of wear resistance and toughness for typical steel milling operations. What advantage does the D57 chipbreaker provide? The D57 chipbreaker ensures controlled chip formation and efficient evacuation, improving surface finish and reducing the risk of chip-related interruptions during milling. What are the key geometric specifications of the insert? This round insert has a nominal size of 10 with a T3 thickness and tolerance class H; the ROHX-style designation defines its seating and indexing behaviour in compatible toolholders. Is this insert suitable for heavy engagement and interrupted cuts? Thanks to the round geometry and the robust WPP35G grade with Tiger‑tec Gold coating, the insert offers good load distribution and edge stability, making it appropriate for applications with variable engagement. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ROHX10T3M0-D57 WSM35G X Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Gold coating and stable chip control with the D57 breaker support reliable milling of demanding alloys; order the ROHX10T3M0-D57 WSM35G insert directly via Metav Werkzeuge or ask our consultants if needed. ROHX10T3M0-D57 WSM35G indexable milling insert — Tiger·tec Gold coating, D57 chipbreaker | Walter Tools The ROHX10T3M0-D57 WSM35G indexable milling insert is a round, thin-profile plate designed for milling applications in rostfreier Stahl and high-temperature alloys, combining a coated carbide grade with a dedicated chipbreaker for controlled metal removal. Tiger·tec Gold coating for wear resistance Optimised chip control with D57 breaker Suitable for rostfreier Stahl and superalloys Round form, size 10 with T3 thickness Robust coating and grade for demanding materials The combination of the WSM35G carbide grade and the Tiger·tec Gold coating delivers enhanced resistance to thermal and abrasive wear, which directly benefits cycle time and tool life when machining tough materials. For operations on rostfreier Stahl and heat-resistant superalloys, the coating reduces flank wear and helps maintain a stable cutting edge under elevated temperatures. This results in more consistent component quality and fewer insert changes, supporting continuous production and predictable tool replacement intervals. Precise chip control that stabilises the process The insert’s D57 chipbreaker is engineered to produce short, controllable chips even in adhesive or gummy workpieces, reducing the risk of built-up edge and improving surface finish. The round form of the plate promotes smooth cutting engagement and flexible entry angles, which is particularly valuable in face and shoulder milling operations. Together with the plate’s tolerance class H, the geometry contributes to reliable indexable insert seating and repeatable positioning in the cutter head, enhancing overall process security. Economic throughput through consistent edge stability By combining a robust substrate with the Tiger·tec Gold surface treatment, the insert achieves a balance between wear resistance and toughness. This balance reduces unscheduled downtime and supports longer uninterrupted runs, which is beneficial for batch production of components in rostfreier Stahl or for high-value aerospace alloys. The design also helps to lower tooling consumption per part, improving cost efficiency without compromising surface quality or dimensional stability. Practical application notes and compatibility The plate’s designation and format make it compatible with toolholders designed for round, thin inserts of the same ISO shape and size. The T3 thickness specification and the size 10 dimension define the suggested clamping and cutter settings; the tolerance class H assists in selecting the correct pocket fit. For specific machining strategies, feed rates and speeds should be derived from workpiece material and machine rigidity, taking advantage of the coating’s capability for elevated cutting speeds. If greater detail or validation is required for a particular application, technical consultation is recommended to match the insert to the cutter body and machining parameters. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ROHX10T3M0-D57-WSM35G-WALTER Label: Fräswendeschneidplatte ROHX10T3M0-D57 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger·tec Gold Facts Plate size: 10 Thickness designation: T3 Chipbreaker: D57 Tolerance class: H Form: Round Special features Grade: WSM35G Coating: Tiger·tec Gold Material designation: S / M Suitable for rostfreier Stahl Suitable for superalloys and titanium FAQ What materials is this insert suitable for? The ROHX10T3M0-D57 WSM35G insert is specified for rostfreier Stahl (M) and for heat-resistant superalloys and titanium (S), reflecting its application-oriented carbide grade and coating. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WSM35G grade increases thermal and abrasive resistance, helping the insert maintain a stable cutting edge and extend tool life under demanding cutting conditions. What is the significance of the D57 chipbreaker? The D57 chipbreaker provides controlled chip formation to reduce built-up edge and improve surface finish; it is particularly effective when machining gummy or adhesive materials. Is the round form advantageous for specific milling operations? Yes, the round plate promotes smooth entry and is forgiving on varying engagement angles, making it suitable for face milling and operations requiring flexible cutting geometry. Which designation should be quoted when ordering or replacing the insert? Quote the ISO designation ROHX10T3M0-D57 WSM35G and the SKU ROHX10T3M0-D57-WSM35G-WALTER to ensure correct identification of the Walter Tools indexable milling insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
ROHX10T3M0-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a proven PVD coating and versatile material range to increase process reliability and tool life; the combination of the WSP45G grade and the round chipbreaker design supports consistent milling across Stahl, rostfreier Stahl and high-temperature alloys. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. ROHX10T3M0-D57 WSP45G — Fräswendeschneidplatte by Walter Tools (Tiger-tec Gold, P/M/S) ROHX10T3M0-D57 WSP45G is a round indexable milling insert optimised for versatile milling tasks in a wide range of materials Tiger-tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, Superalloys Round insert with chipbreaker D57 T3 thickness for stable clamping High-performance milling across mixed materials The WSP45G grade belongs to Walter Tools’ Tiger-tec Gold series and is a PVD-coated carbide developed for demanding milling. Its material design targets the specific challenges of machining Stahl, rostfreier Stahl and heat-resistant alloys: controlled heat generation, secure chip formation and stable cutting edges. As an indexable milling insert, it reduces setup complexity by offering reproducible cutting behaviour and predictable wear characteristics, helping to lower scrap rates and optimise cycle times in batch production or mixed-material jobs. Reliable chip control and edge stability for consistent results The round plate geometry combined with the chipbreaker D57 gives a balanced chip flow and gentle engagement with the workpiece. The plate’s T3 thickness and tolerance class H ensure secure clamping and minimal micro‑movement under load, which preserves surface integrity and tool life. These characteristics translate into predictable tool change intervals and less rework, supporting throughput improvements and consistent component quality in both roughing and semi-finishing operations. Practical advantages for process integration and productivity Specified for general milling applications, this insert fits flexible machining strategies: from higher-feed roughing to precise contouring passes. The coating and substrate pairing emphasise wear resistance and edge robustness, contributing to longer cutting times between indexings. The clear designation and ISO-like nomenclature simplify tool selection and inventory management, while the round insert form offers versatility across different cutter bodies. For implementation, Metav Werkzeuge can advise on cutter compatibility and optimal cutting data for a given machine and material mix. For tailored recommendations on integrating this Walter Tools Tiger-tec Gold insert into production, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ROHX10T3M0-D57-WSP45G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Grade: WSP45G Material application: P / M / S Plate form: Round Plate size: 10 Thickness: T3 Chipbreaker: D57 Tolerance class: H Special features Coating technology: Tiger-tec Gold (PVD coated carbide) Execution: X ISO designation: ROHX10T3M0-D57 WSP45G Suitable materials: Stahl, rostfreier Stahl, Superalloys/Titan FAQ What materials is this insert suitable for? The ROHX10T3M0-D57 WSP45G insert is designed for machining Stahl, rostfreier Stahl and heat-resistant superalloys (group S), reflecting the intended P/M/S application range of the WSP45G grade by Walter Tools. How does the Tiger-tec Gold technology benefit milling operations? Tiger-tec Gold provides a robust PVD coating and substrate combination that improves wear resistance and edge stability, so the WSP45G grade maintains consistent performance and longer cutting intervals in diverse milling tasks. What advantages does the round plate with chipbreaker D57 deliver? The round geometry with chipbreaker D57 promotes reliable chip evacuation and smooth engagement, reducing the risk of build-up and supporting stable surface finishes during both roughing and finishing passes. Is this insert suitable for high-temperature alloys and Titanium? Yes—the WSP45G grade’s composition and coating are formulated to cope with the thermal and mechanical stresses encountered when machining Titan and other heat-resistant alloys in group S. Which cutter types is this insert compatible with? This round indexable plate is compatible with standard milling cutter bodies that accept the ROHX10T3M0-D57 form; check the cutter manufacturer’s clamping and seat specifications to ensure correct fitting. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com