SNEX1204PNN-A27 WHH15X Wendeplatten - Walter Tools
Combining a durable coated carbide grade WHH15X with a square 90° geometry and an effective A27 chipbreaker, this milling insert offers robust edge strength and consistent chip control for reliable production runs. Order the SNEX1204PNN-A27 WHH15X directly via Metav Werkzeuge or consult our specialists for application advice. SNEX1204PNN-A27 WHH15X — Milling indexable insert, 90° square, Walter Tools The SNEX1204PNN-A27 WHH15X is a coated carbide milling indexable insert designed for secure shoulder milling and stable chip formation in a broad range of industrial milling tasks. Coated carbide grade WHH15X Square 90° geometry insert 0° negative rake for high strength A27 chipbreaker for stable chips Faster, more productive milling through controlled chip formation The combination of a modern coated carbide grade and the dedicated A27 chipbreaker improves chip control and reduces interruptions for cleaning and rework. By promoting short, consistent chips the insert enables higher feed rates and steadier machining cycles, which supports measurable gains in throughput and machine utilisation. For production environments seeking efficiency, this geometry reduces the risk of chip-related downtime while maintaining cutting stability. Strong geometry for durable corners and precise shoulders A square 90° insert provides full shoulder capability and repeatable corner formation. The 0° negative rake increases edge strength and resistance to mechanical shock, making the insert suitable for interrupted cuts and tougher operational conditions. The defined tolerance class E and the insert’s dimensional code ensure consistent seating and predictable runs in compatible milling cutters, supporting repeatability across batches and simplifying tool change procedures. Practical integration and application guidance for workshop use Designed as an indexable insert with multiple cutting edges, the component integrates into standard milling cutter bodies that accept this form factor. Series information is provided as Walter Schneidstoffsorte – Serie offen; material suitability should be verified against the manufacturer’s product matrix to match workpiece materials and cutting parameters. The insert’s execution and chip control features favour stable machining cycles and predictable tool life, helping workshop planners achieve consistent part quality. For tailored recommendations on cutter compatibility and to order Walter Tools inserts, contact Metav Werkzeuge for expert advice and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNEX1204PNN-A27-WHH15X-WALTER Designation: SNEX1204PNN-A27 WHH15X Product type: Milling indexable insert Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Execution: X Core data Insert size: 12 Shape: Square 90° Thickness: 04 Rake angle: 0° (negative) Chipbreaker: A27 Tolerance class: E Materials & features Coating / material: Katalogabhängig (coated cemented carbide) Grade: WHH15X Application note: Check product matrix for material suitability Indexable design with multiple cutting edges FAQ What operations is this insert designed for? The SNEX1204PNN-A27 WHH15X is intended for shoulder and general milling operations where a square 90° geometry and strong cutting edge are required. How does the A27 chipbreaker affect machining? The A27 chipbreaker promotes short, manageable chips; in combination with the WHH15X grade it improves chip control and stabilises machining cycles. Is this insert suitable for interrupted cuts? Yes. The 0° negative rake and robust insert form provide enhanced edge strength suited to interrupted cuts and tougher milling conditions. Which material ranges should be checked before use? Material compatibility must be verified against the Walter product matrix; the insert’s grade and coating are specified as WHH15X and catalogue-dependent respectively. How is dimensional consistency ensured? The insert is manufactured to tolerance class E, ensuring reliable seating and repeatable performance in compatible tool holders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer Walter Tools.
SNEX1204PNR-B67 WAK15 Wendeplatten - Walter Tools
High-performance, uncoated carbide for non‑ferrous materials and a dedicated B67 chipbreaker combine to deliver stable chip formation and consistent surface quality; the result is efficient, predictable aluminium machining with lower tooling costs. Order the inserts directly via Metav Werkzeuge or request application guidance from the consultants. SNEX1204PNR-B67 WAK15 milling indexable insert — for aluminium and non‑ferrous metals (Walter Tools) A SNEX1204PNR-B67 WAK15 milling insert designed for precise, high‑feed and high‑quality machining of aluminium and other non‑ferrous materials Uncoated carbide grade WAK15 for aluminium B67 chipbreaker for controlled chip formation Square 90° shape for robust corner strength 0° negative rake for secure cutting action Consistent chip control for aluminium that improves throughput The WAK15 grade is an uncoated carbide specifically formulated for the demands of aluminium and other non‑ferrous metals. Its geometry promotes low friction at the cutting edge and reduces material adhesion, which is critical for avoiding build‑up on the insert and preserving surface finish. The integrated B67 chipbreaker produces short, manageable chips even at higher feed rates; this improves machine uptime by limiting swarf entanglement and simplifies post‑process handling. These design choices contribute to measurable productivity gains in series production where repeatability matters most. Robust geometry that enhances stability and tool life A square 90° plate format delivers strong corner support and reduces the risk of premature edge failure during interrupted cuts or heavy engagement. The 0° negative rake provides a secure cutting action and increases resistance to cutting edge chipping where light‑alloy workpieces can cause varying load conditions. Together with the specified plate thickness 04, the insert offers a balance between rigidity and economical material usage; this supports predictable wear behaviour and more consistent reconditioning intervals. For operations prioritising process reliability, the result is fewer tool changes and higher effective machining hours. Efficient integration into cutter systems and application advantages The insert’s designation and ISO‑style format allow straightforward identification and compatibility with a wide range of milling cutters that accept SNEX‑type plates. The SNEX1204PNR‑B67 format eases inventory management by matching common toolholder systems used in aluminium machining. Because the grade is uncoated, it suits applications where a sharp, chemically inert cutting edge is required to avoid thermal adhesion, for example with softer non‑ferrous metals. The overall package supports cost‑effective production: focused geometry reduces scrap risk and the stable chip form decreases handling time during operations. Contact Metav Werkzeuge for tailored application advice and to secure SNEX1204PNR‑B67 WAK15 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNEX1204PNR-B67-WAK15-WALTER SKU: SNEX1204PNR-B67-WAK15-WALTER Name: Fräswendeschneidplatte SNEX1204PNR-B67 WAK15 Walter Tools Type: Milling indexable insert Core data Plate size: 12 Plate thickness: 04 Shape/corner angle: Quadrat 90° Rake angle: 0° (negativ) Special features Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) Chipbreaker: B67 Execution: X Tolerance class: E Application: Aluminium and non‑ferrous metals FAQ What materials is this insert optimised for? The SNEX1204PNR‑B67 WAK15 insert is optimised for aluminium and a broad range of non‑ferrous metals, as indicated by the WAK15 grade and the insert geometry. Is the insert coated or uncoated? This grade is uncoated carbide, selected to provide a sharp, low‑adhesion cutting edge for light alloys and similar materials. How does the B67 chipbreaker affect machining? The B67 chipbreaker produces short, controllable chips that reduce swarf issues and contribute to safer, more efficient machining when using the insert in compatible cutter bodies. Can the square 90° shape be used for finishing and roughing? The square 90° format offers robust corner strength suitable for medium engagement roughing and certain finishing strategies where stability and repeatable geometry are required. Which series or toolholder systems accept this plate format? The SNEX‑format insert conforms to common ISO‑style milling systems; compatibility should be checked against the cutter body specification, with SNEX1204PNR‑B67 being the identifying designation. Walter Tools: The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is recognised among leading global manufacturers of precision cutting tools for metalworking; the brand is known for quality and consistent tool performance. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand names and trademarks are used for explanation only and do not imply any affiliation with Metav Werkzeuge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNEX1204PNR-B67 WHH15X Wendeplatten - Walter Tools
Take advantage of the WHH15X coated-carbide grade and the B67 chipbreaker combined with a square 90° geometry and 0° negative rake for consistent, productive milling cycles. Order the SNEX1204PNR-B67 WHH15X directly via Metav Werkzeuge or consult the technical team for application matching. SNEX1204PNR-B67 WHH15X indexable milling insert by Walter Tools — square 90° geometry, 0° negative rake The SNEX1204PNR-B67 WHH15X is a square 90° indexable milling insert designed for robust milling tasks, featuring a coated carbide grade to support stable chip formation and consistent edge life in a range of machining scenarios. Coated carbide grade WHH15X Square 90° geometry for robust milling 0° negative rake for stable engagement B67 chipbreaker for controlled chip flow Improved chip control for steady production The combination of the B67 chipbreaker and the WHH15X coated-carbide grade provides visible benefits in chip formation and evacuation: the chipformer geometry supports predictable chip segmentation, reducing chatter and improving cycle stability. For production environments where reproducible chip flow matters, this insert contributes to fewer interruptions and more reliable throughput. Material compatibility should be verified against the product matrix, as the grade is specified as a coated carbide and the series is listed as open; this ensures flexibility but requires selection based on the workpiece material. Secure engagement and edge strength for interrupted cuts A square 90° insert with 0° negative rake offers mechanical strength at the cutting edge and a geometry suited to axial and radial loading. The negative rake increases edge robustness during heavy engagement or interrupted cuts, while the square form provides multiple effective cutting edges per indexable corner. The designation includes a tolerance class E, supporting consistent seating and repeatability in standard indexable milling holders. These geometrical choices reduce the risk of edge chipping under demanding conditions, helping to maintain surface quality across batches. Process reliability and simple integration into tool systems The insert’s WHH15X carbide class and the open series arrangement allow integration into common milling systems without elaborate adaptation. With a size 12 and thickness 04, the insert matches conventional toolholders for straightforward replacement and indexing. The coated surface promotes wear resistance and longer edge life, contributing to predictable tool-change intervals and improved cost-efficiency per component. For best results, pair the insert with suitable cutting parameters and coolant strategies recommended for the selected workpiece material. For application advice or to place an order for the Walter Tools SNEX1204PNR-B67 WHH15X, contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for precise specification support and availability. Technical Data SKU: SNEX1204PNR-B67-WHH15X-WALTER Designation (ISO): SNEX1204PNR-B67 WHH15X Product type: Indexable milling insert (milling insert) Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Free rake angle: 0° (negative) Insert form: Square 90° Tolerance class: E Special features Grade: WHH15X (coated carbide) Chipbreaker: B67 Series: Walter Schneidstoffsorte - Serie offen Material specification: catalog-dependent Application note: check product matrix for material suitability FAQ What geometry does this insert feature? The SNEX1204PNR-B67 WHH15X insert is a square 90° geometry with a 0° negative rake, designed for robust edge engagement. Which cutting grade and coating are used? The insert uses the WHH15X coated-carbide grade; it is a coated hardmetal grade intended for stable edge life and general-purpose milling performance. How does the B67 chipbreaker affect machining? The B67 chipbreaker promotes controlled chip formation and evacuation, supporting steady machining cycles and reducing the likelihood of chip-related disturbances. Is this insert suitable for all materials? Material suitability must be checked against the product matrix; the grade is catalog-dependent. For specific workpiece materials, refer to the technical matrix or consult Metav Werkzeuge for guidance. What dimensional and tolerance data are relevant for setup? Key setup data: size 12, thickness 04, square 90° form and tolerance class E to ensure consistent seating and repeatability in indexable milling holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SNEX15T612R-B67 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WPP35G coated-carbide grade for reliable steel machining; the combination of robust geometry and optimised chip control supports productive milling cycles. Order the inserts via Metav Werkzeuge or consult our specialists for application-specific cutting data. SNEX15T612R-B67 WPP35G milling insert – Tiger·tec Gold, for steel | Walter Tools The SNEX15T612R-B67 WPP35G is a coated carbide milling insert engineered for stable, high-productivity machining of steel components with square 90° geometry. Tiger·tec Gold coated carbide grade WPP35G Optimised chip control with B67 chipbreaker Square 90° geometry with 1.2 mm corner radius Negative 0° rake for stable heavy cuts Maximise productivity with a wear-resistant grade The Walter WPP35G grade, part of the Tiger·tec Gold family, pairs a multilayer coating with a wear-resistant carbide substrate to extend tool life in steel applications. Designed for the thermal and mechanical demands of ISO P materials, this insert reduces wear rates and preserves cutting-edge integrity under continuous operation. The result is more consistent cycle times and fewer indexings, which directly improves throughput and lowers overall machining cost per component. The coated carbide construction also helps maintain dimensional accuracy across long production runs. Robust geometry for heavy-duty milling and consistent finish A square 90° shape combined with a 1.2 mm corner radius and a negative 0° rake forms a geometrical package that resists edge chipping and supports stable engagement in heavier cuts. The B67 chipbreaker is tuned for controlled chip formation and evacuation when machining steel, reducing the risk of built-up edge and improving surface integrity. This geometry is particularly suited to shoulder milling and slotting where rigidity and repeatable edge behaviour are essential. Such features translate into reliable component surfaces and fewer reworks in serial production. Practical application advice and process reliability Specifically configured for steel (ISO P), this insert supports a range of cutting strategies from roughing to finishing when matched with appropriate toolholders and parameters. The plate’s series: Tiger·tec Gold and the proven WPP35G formulation offer broad applicability across unalloyed and alloyed steels, balancing toughness and wear resistance. For tailored feed and speed recommendations, or if the workpiece material varies, Metav Werkzeuge’s technical advisors can provide cutting data and optimisation tips to help secure consistent results in the production environment. Contact Metav Werkzeuge for application-specific advice on Walter Tiger·tec Gold inserts and secure the optimal SNEX15T612R-B67 WPP35G solution for steel machining today; consultants are available to discuss cutting data and toolholder compatibility. Technical Data SKU: SNEX15T612R-B67-WPP35G-WALTER Article designation: SNEX15T612R-B67 WPP35G Product type: milling insert (indexable) Manufacturer: Walter Tools Core specifications Size: 15 mm Geometry: Square 90° Corner radius: 1.2 mm Thickness: T6 Clearance angle: 0° (negative) Tolerance class: E Materials & features Series: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: B67 Suitable for: Steel (ISO P) Execution: X FAQ What materials is this insert intended for? The SNEX15T612R-B67 WPP35G is formulated for machining steel (ISO P), offering reliable performance across unalloyed and alloyed steels. How does the B67 chipbreaker influence cutting? The B67 chipbreaker provides controlled chip formation and evacuation when machining steel, supporting improved surface integrity and reduced built-up edge on the SNEX15T612R-B67 WPP35G insert. What production benefits does the Tiger·tec Gold series offer? Tiger·tec Gold coatings on the WPP35G grade increase wear resistance and thermal stability, promoting longer tool life and more consistent cycle times in serial steel machining. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanatory purposes only; no affiliation between Metav Werkzeuge and the named brands is implied. The offered item is original, brand-new merchandise from the manufacturer.
SNGA120408SM-S WCH10C Wendeplatten - Walter Tools
High-performance WCH10C coated ceramic grade and a 0.8 mm corner radius ensure long tool life and consistent surface quality when machining hardened steels; combined with a negative 0° rake for secure engagement, this insert supports reliable hard-turning operations. Order the SNGA120408SM-S WCH10C directly via Metav Werkzeuge or consult the team for application recommendations. SNGA120408SM-S WCH10C – indexable turning insert, coated ceramic for hardened steels (Walter Tools) A SNGA120408SM-S WCH10C indexable turning insert engineered for high-speed hard turning and stable chip control in the machining of hardened steels Coated ceramic grade WCH10C Square 90° shape for stable cutting 0.8 mm corner radius for edge strength Negative 0° rake for secure engagement High-speed hard turning with sustained tool life The WCH10C cutting grade is a coated ceramic developed for high cutting speeds and elevated temperature stability, which directly reduces flank wear and extends uptime. In practical terms, this means fewer insert changes and more consistent component finish during continuous production. The SNGA120408SM-S WCH10C format delivers a balance between toughness and thermal resistance, making it suitable for demanding hard-turning tasks where hardened steels require a wear-resistant geometry. The result is lower cycle-time variability and improved process repeatability. Stable geometry for precision and repeatable results A square 90° plate form combined with a 0.8 mm corner radius and a negative 0° free angle produces a rigid cutting edge that resists chipping under heavy radial loads. This geometry enhances process security by maintaining a stable cutting line and predictable force vectors, which translates into improved dimensional accuracy and surface integrity on workpieces. Negative rake inserts like this one engage securely at the start of cut, reducing the risk of edge breakouts in interrupted cuts and hard materials. Efficient chip control and reduced rework The built-in chipbreaker S is tailored for hard materials to produce compact, manageable chips even at elevated speeds. Controlled chip formation minimises manual intervention and secondary cleaning operations at the machine, contributing to a lower overall cost per part. The ceramic cutting core also tolerates higher temperatures, enabling faster metal removal rates on pre-hardened and hardened steels without sacrificing tool life or component quality. Practical value in production environments Designed for series production and finishing of hardened components, this indexable turning insert excels where repeatable quality and low tool-change frequency matter. The WCH10C grade and robust plate geometry reduce downtime and support stable cycle times, benefiting shops that require consistent output from turnoversheet to turnover. The brand heritage of Walter Tools adds confidence in performance and supply chain reliability, reinforcing predictable delivery and reproducible machining results. For application guidance, grade selection or to request delivery from Metav Werkzeuge, contact the Metav Werkzeuge team for tailored advice and sample availability. Technical data Article number: SNGA120408SM-S-WCH10C-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) ISO designation: SNGA120408SM-S WCH10C Facts Plate size: 12 Plate thickness: 04 Corner radius: 0,8 Free angle: 0° (negativ) Tolerance class: G Special features Series: Walter CBN / Hartstoff Grade: WCH10C (coated cutting ceramic) Plate form: Quadrat 90° Chipbreaker: S Material application: hardened steels (H) Suitable for: pre-hardened steel machining FAQ What materials is this insert designed for? The SNGA120408SM-S WCH10C is designed primarily for the machining of hardened steels, with the WCH10C ceramic grade optimised for high-temperature stability and wear resistance. How does the 0.8 mm corner radius influence performance? A 0.8 mm corner radius increases edge strength and helps absorb impact loads, improving resistance to chipping during hard-turning operations with the SNGA120408SM-S WCH10C. Is the negative 0° free angle suitable for finishing passes? Yes, the negative 0° free angle provides secure engagement and a stable cutting edge, which supports consistent surface finish during finishing and semi-finishing passes. What role does the chipbreaker S play in production? The chipbreaker S promotes compact chip formation when machining hard materials, aiding automatic chip evacuation and reducing manual intervention at the machine. Can this insert be used on pre-hardened steel? The SNGA120408SM-S WCH10C is suitable for pre-hardened steels and hard-turning applications, offering wear resistance that prolongs insert life in such conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The item offered is original and brand-new from the manufacturer.
SNGA120408T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Take advantage of the combination of high-speed capability and repeatable geometry for reliable turning operations; robust chip control and a WCK10 cutting ceramic grade support productive machining and long tool life — order directly via Metav Werkzeuge or consult Metav's application specialists for matching workpiece groups. SNGA120408T02020 WCK10 – indexable turning insert, square 90° with 0.8 mm corner radius (Walter Tools) A SNGA120408T02020 WCK10 indexable turning insert engineered for temperature-resistant, high-speed turning applications where stable cutting and accurate profile formation are required Square 90° insert for versatile turning WCK10 cutting ceramic for high-speed cuts 0.8 mm corner radius for precise profiles Negative 0° rake for stable chip formation High-speed performance with temperature-resistant cutting material The open-series WCK10 grade is a cutting ceramic developed for elevated cutting speeds and temperature-stable operations. In practice, the ceramic matrix sustains harder cutting zones and reduces wear under thermal stress, which translates into longer effective tool life and fewer interruptions for index changes. The material selection is particularly beneficial where cycle time reduction is a priority; machining parameters should be aligned with the specific ISO material group indicated in the product matrix to ensure optimal results. Emphasis on thermal stability offers a clear productivity advantage in continuous turning processes. Geometry designed for repeatable profiles and edge security A square 90° format combined with a 0.8 mm corner radius delivers controlled engagement and consistent profile reproduction on turned components. The insert’s geometry supports stable cutting forces, which helps maintain surface quality and dimensional repeatability across workpieces. The designation for thickness (04) is a standard code for the insert series and should be checked against toolholder compatibility; the negative 0° rake contributes to a secure cutting edge and improved chip control, reducing vibration in heavy or interrupted cuts. Together, these features ease process planning and support reliable batch production. Process security, tool life and application guidance The open-series philosophy of the grade offers broad applicability across suitable workpiece materials — check the product matrix for precise ISO matches. The insert’s construction and negative rake orientation foster stable chip formation, which enhances insert life and reduces the frequency of tool changes. For production environments seeking consistent results, the combination of thermal resistance and robust geometry provides a balanced solution between performance and service life. For application-specific parameter recommendations or material compatibility, Metav Werkzeuge’s technical consultants provide targeted guidance based on machining goals and equipment. For application advice or to secure supply of Walter Tools indexable inserts, contact Metav Werkzeuge for specification support and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SNGA120408T02020-WCK10-WALTER Label: Drehwendeschneidplatte SNGA120408T02020 WCK10 Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 12 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Insert shape: Square 90° Thickness designation: 04 Grade: WCK10 Tolerance class: G Special features Series: Walter Schneidstoffsorte - Serie offen Cutting material: Schneidkeramik (temperature-resistant, suitable for high cutting speeds) Material suitability: Check ISO workpiece group in product matrix Execution: A Material specification: Katalogabhängig FAQ What materials is this insert suitable for? The SNGA120408T02020 WCK10 insert is based on a cutting ceramic grade intended for high-speed, temperature-resistant turning; compatibility should be determined from the product matrix against the relevant ISO workpiece group. How does the negative 0° rake affect machining? A negative 0° rake increases edge strength and promotes stable chip formation, making the insert well suited to interrupted cuts and operations demanding edge security. Which toolholder types are compatible with this square 90° insert? Compatibility depends on the toolholder pocket and the thickness designation (04); holders designed for 90° square inserts with matching seating dimensions are required for correct clamping and repeatability. Can this insert improve cycle times in production turning? The WCK10 ceramic grade is optimised for elevated cutting speeds; when used within recommended parameters for the target ISO group, the insert can reduce cycle time through higher allowable cutting speeds. How is the corner radius relevant to surface quality? The 0.8 mm corner radius balances profile accuracy and edge strength; it helps produce repeatable surface finishes while avoiding excessive stress concentration on the cutting edge. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGA120408TM-4 WBH30 A Wendeplatten - Walter Tools
High wear resistance and dimensionally stable cutting behaviour from the WBH30 CBN grade, combined with a robust square 90° geometry and 0.8 mm corner radius, delivers consistent performance in hard-turning operations; order directly via Metav Werkzeuge or contact the consultants for cutting data and availability. SNGA120408TM-4 WBH30 – Square CBN turning insert, 90°, for hardened steels (Walter Tools) The SNGA120408TM-4 WBH30 is a square CBN turning insert engineered for hard turning of heat-treated and pre-hardened steels in demanding production environments. CBN grade WBH30 for hard-material turning Square 90° geometry with 0.8 mm corner radius Negative rake 0° for robust cutting edge Suitable for hardened steels and pre-hardened alloys High-performance CBN grade for sustained productivity The insert’s WBH30 grade is a CBN-based cutting material developed for the abrasion-intensive demands of hard machining. CBN provides superior wear resistance and thermal stability compared with conventional ceramics or carbide grades, which translates into longer tool life and fewer indexings in serial production. For shop floors that process heat-treated components, the combination of a CBN cutting edge and a stable chipformer reduces flank wear and maintains consistent dimensional accuracy, helping to lower overall machining costs through fewer interruptions and predictable tool-change intervals. Geometry engineered for process security and surface quality A square 90° configuration with a 0.8 mm corner radius and a 0° (negative) free angle delivers a strong cutting edge that tolerates interrupted cuts and high radial loads. The defined chipbreaker design (type 4) promotes controlled chip flow during hard turning, improving surface finish and minimising thermal damage. The compact plate thickness and the insert’s tolerance class G ensure repeatable seating and reliable clamping forces in suitable toolholders, so the machining process remains stable even under elevated cutting pressures—leading to reproducible part quality and reduced scrap rates. Application advantages and straightforward integration in production Belonging to the Walter CBN / hard-material series, this square insert is targeted at turning operations on hardened steels and pre-hardened workpieces where high hardness and severe tooling demands occur. The robust edge preparation and CBN composition help to achieve consistent surface integrity on treated components and to maintain cutting performance across batch runs. Integration into existing turning systems is straightforward when the correct toolholder and cutting data are selected; for complex or unusual alloys, consultation on cutting parameters and edge life optimisation is recommended to maximise the benefits of the CBN grade. For demanding hard-turning tasks consider the Walter Tools SNGA120408TM-4 WBH30; contact Metav Werkzeuge for tailored cutting data, availability and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: SNGA120408TM-4-WBH30-WALTER ISO designation: SNGA120408TM-4 WBH30 Series: Walter CBN / Hartstoff Grade: WBH30 Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Corner radius: 0.8 Free angle: 0° (negative) Chipbreaker: 4 Tolerance class: G Shape: Square 90° Special features CBN cutting material Suitable for hardened steels Suitable for pre-hardened steel Suitable for steel Execution: A Material code: H Series name: Walter CBN / Hartstoff FAQ What workpiece materials are best suited to this insert? The SNGA120408TM-4 WBH30 is designed primarily for hardened steels and pre-hardened alloys; its CBN composition provides the required wear resistance for such materials. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength and improves surface integrity, making the insert particularly effective for interrupted cuts and higher radial engagement. What does the WBH30 designation mean? WBH30 denotes a Walter CBN grade optimised for hard machining tasks, offering high abrasion resistance and thermal stability for consistent tool life. Can this insert be used for finishing passes? Yes—the stable edge geometry and chip control make the insert suitable for finishing operations on hardened components, where a good surface finish and dimensional control are required. Is special tooling required to use this insert? Standard toolholders compatible with the SNGA insert family and correct clamping to the specified tolerance class G are sufficient; matching cutting data to the workpiece hardness is important to achieve optimal life. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
SNGA120412TM-4 WBH30 A Wendeplatten - Walter Tools
Benefit from the combination of CBN-grade WBH30 and a robust square geometry for extended edge life and reliable chip control; ideal for hardened-steel production cycles. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNGA120412TM-4 WBH30 – Indexable turning insert, CBN grade for hardened steels | Walter Tools The SNGA120412TM-4 WBH30 is an indexable turning insert engineered for heavy-duty hard turning and stable performance when machining hardened steels in industrial production environments CBN cutting grade WBH30 for hardened steels Square 90° insert geometry 12 mm insert size with 1.2 mm corner radius 0° negative rake for robust cutting Consistent performance in hard turning The CBN-based WBH30 grade delivers high wear resistance and predictable edge behaviour when machining hardened steels (H). Thanks to the CBN substrate, the insert maintains cutting-edge integrity under elevated contact temperatures and abrasive conditions, which translates into fewer changeovers and more stable cycle times. This stability supports tighter process windows and reduces scrap rates, helping production lines achieve consistent part quality without frequent tool downtime. Geometry engineered for strength and chip control A square 90° form combined with a 1.2 mm corner radius and the 0° negative rake creates a mechanically robust cutting edge suited to roughing and interrupted cuts. The geometry increases edge strength and distributes cutting forces, reducing the risk of edge chipping under heavy loads. The integrated chipbreaker (type 4) improves chip segmentation for demanding alloys, aiding machine tool coolant flow and swarf evacuation, which supports secure, repeatable machining cycles. Application focus and process reliability Designed as part of the Walter CBN / Hartstoff series, this insert is intended specifically for hard machining tasks and is suitable for working with pre-hardened and fully hardened steels. The combination of a purpose-built CBN grade and a stable insert geometry yields a reliable solution for production environments seeking reproducible results and reduced tool consumption. For process adaptation, the insert’s tolerance class G and series execution ensure compatibility with standard toolholder systems used in heavy-turning operations. Contact Metav Werkzeuge to discuss the SNGA120412TM-4 WBH30 for specific machining scenarios or to arrange a technical application review with our specialists; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNGA120412TM-4-WBH30-WALTER Label: Drehwendeschneidplatte SNGA120412TM-4 WBH30 Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) ISO designation: SNGA120412TM-4 WBH30 Series: Walter CBN / Hartstoff Grade: WBH30 Execution: A Tolerance class: G Form: Square 90° Free angle: 0° (negative) Facts Insert size: 12 Thickness code: 04 Corner radius: 1.2 mm Chipbreaker: 4 Clearance/rake: 0° (negative) Special features CBN cutting grade for hard and wear-intensive machining Suitable for hardened steels (H) and prehardened steel applications Robust square geometry for heavy cuts Series optimised for stable chip formation and process reliability Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The SNGA120412TM-4 WBH30 is specified for hardened steels (H) and is suitable for prehardened and fully hardened steel machining due to its CBN cutting grade. What cutting grade and series does the insert use? The insert uses the WBH30 CBN grade from the Walter CBN / Hartstoff series, developed for high wear resistance in hard machining tasks. What are the key geometric features of the insert? The insert features a square 90° form, a 1.2 mm corner radius and a 0° negative rake, providing strength for heavy-duty and interrupted cuts while aiding chip control with chipbreaker type 4. Is this insert compatible with standard toolholders? Yes, the SNGA120412TM-4 WBH30 follows standard ISO-style insert designation and tolerance class G, enabling compatibility with conventional turning toolholders designed for this insert geometry and size. How does the WBH30 grade affect production reliability? WBH30’s CBN composition ensures stable edge life and reduced wear under high temperatures and abrasive conditions, contributing to predictable tool life and fewer unscheduled tool changes in production. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product from Walter Tools.
SNGA120416T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Take advantage of the WCK10 ceramic cutting grade for high cutting speeds, combined with a 0° negative rake and a 1.6 mm corner radius to achieve temperature‑resistant, stable turning performance; order directly via Metav Werkzeuge or contact our consultants for grade selection and machining advice. SNGA120416T02020 WCK10 — Walter Tools turning insert, square 90° with 0° negative rake SNGA120416T02020 WCK10 is a square, indexable turning insert designed for high‑speed and temperature‑resistant machining applications where stable cutting performance and consistent surface quality are required. Ceramic cutting grade WCK10 0° negative rake for stable cutting Square 90° geometry, size 12 Corner radius 1.6 mm for finish control Consistent high‑speed turning with a ceramic cutting grade The WCK10 grade is a cutting ceramic designed for elevated cutting speeds and excellent thermal resistance. In practice, this means the insert maintains edge integrity during demanding operations and reduces the frequency of edge changes. The square 90° geometry ensures robust support in the toolholder and predictable chip flow, while the 0° negative rake contributes to a stable cutting action under interrupted cuts. For production environments aiming to increase throughput, this insert offers a reliable route to higher cutting speeds without compromising component quality. Predictable surface finish and tool life through geometry A 1.6 mm corner radius provides a balance between edge strength and surface finish: it helps to distribute cutting forces across a larger area for improved edge life, yet is fine enough to produce consistent roughness on typical turned components. The insert’s size 12 body offers an established platform for medium to heavy turning tasks, and the design tolerances (class G) support interchangeability in industrial tool systems. When combined, these characteristics reduce process variation and support repeatable results in series production. How the grade translates into machining benefits Cutting ceramic materials like WCK10 are particularly suited to machining where heat resistance and wear stability are critical; they excel in finishing and semi‑finishing operations at elevated speeds. The material choice allows operators to push spindle speeds or feed rates while maintaining acceptable tool life, which can shorten cycle times per part. Note that the ISO material group suitability should be checked against the product matrix to confirm the match for a given workpiece material and to determine optimal cutting parameters. Practical considerations for setup and use The insert comes in an open series from Walter Tools and is specified with a negative rake and square geometry that demands a compatible toolholder. Because cutting ceramic behaves differently from carbide, coolant strategy and machine rigidity should be reviewed: ceramics often perform best with rigid setups and optimised chip evacuation. For customers transitioning from carbide‑based solutions, consulting the product matrix and testing a sample setup will help to establish stable feed and speed windows and to exploit the grade’s performance safely. For tailored advice on applying the SNGA120416T02020 WCK10 insert in specific applications, contact Metav Werkzeuge for expert consultation and ordering: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: SNGA120416T02020-WCK10-WALTER Insert designation: SNGA120416T02020 WCK10 Product type: Drehwendeschneidplatte Core dimensions Shape: Square 90° Size: 12 Thickness: 04 Corner radius: 1.6 Rake angle: 0° (negative) Tolerance class: G Designs and special features Series: Walter Schneidstoffsorte - Serie offen Grade: WCK10 (cutting ceramic) Execution: A Notes: Suitable for high cutting speeds and temperature‑resistant machining; consult ISO material group matrix for specific workpiece suitability Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The SNGA120416T02020 WCK10 insert uses a cutting ceramic grade optimised for high‑speed and temperature‑resistant machining; suitability for specific materials should be checked in the product’s ISO material group matrix. How does the 0° negative rake affect cutting? A 0° negative rake provides a more robust cutting edge and improved stability under heavy or interrupted cuts, which is why this geometry is chosen for the SNGA120416T02020 WCK10 insert. Can the insert be used for finishing as well as roughing? Yes. The WCK10 ceramic grade is designed to perform well at elevated speeds and is appropriate for finishing and semi‑finishing; testing with the intended workpiece and parameters is recommended. What tooling considerations are important for ceramic inserts? Ceramic inserts such as WCK10 demand a rigid setup, appropriate toolholder support for square inserts, and an optimised cooling/chip‑removal strategy to fully benefit from the grade’s thermal resistance. Is the SNGA120416T02020 WCK10 compatible with standard toolholders? The square 90° form and specified dimensions follow common indexable insert conventions; ensure toolholder compatibility with the SNGA designation and the insert’s thickness before assembly. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
SNGN120408TM-S WBK30 Wendeplatten - Walter Tools
Benefit from the CBN cutting performance of the WBK30 grade, the reproducible edge life of a square 90° format with a 0.8 mm corner radius, and the stability afforded by a negative 0° relief for demanding, hardened-material turning — order directly via Metav Werkzeuge or contact their consultants for application advice. SNGN120408TM-S WBK30 – Square 90° CBN indexable turning insert, 0.8 mm corner radius (Walter Tools) The SNGN120408TM-S WBK30 is a square 90° indexable turning insert in a CBN grade, engineered for heavy‑duty finishing and machining of hardened steels and other highly abrasive materials. CBN grade WBK30 for hardened steels Square 90° insert for robust turning Negative 0° relief for stable cutting 0.8 mm corner radius for defined edge Dependable cutting life for hardened and high‑wear tasks The SNGN120408TM-S WBK30 combines the abrasion resistance of CBN with a geometry designed to maintain edge integrity in high‑stress applications. The WBK30 grade is intended for machining hardened steels and, depending on the material matrix, certain castings or superalloys; this results in extended service life and fewer insert changes, which lowers tool‑room downtime and increases machine uptime. For precise matching of grade to component material, consult the product matrix supplied by the manufacturer. Secure geometry for repeatable surface quality A square 90° outline and 0.8 mm corner radius create a robust cutting edge that tolerates higher radial loads while producing consistent surface finish. The negative 0° relief provides a compact cutting geometry that reduces vibration and improves seat stability in the tool holder, yielding predictable cutting forces and repeatable part tolerances. The integrated chipbreaker S supports controlled chip formation and evacuation during finishing passes, which helps to protect the workpiece and toolholder. Process efficiency and selection guidance Using a CBN grade such as WBK30 typically leads to higher process security and longer intervals between regrinds or insert changes, particularly when machining hardened components. This enhances productivity and supports cost‑effective batch production. Selection remains application‑specific: check the material suitability against the product matrix and consider machine rigidity, clamping and coolant strategy when integrating this insert into an existing process. For tailored recommendations on cutting data and optimal toolholder pairing, technical consultation is advised. For precise application advice and to confirm availability of the Walter Tools SNGN120408TM-S WBK30 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — their consultants provide material‑specific guidance and ordering support Technical data Article number: SNGN120408TM-S-WBK30-WALTER Designation: SNGN120408TM-S WBK30 Product type: indexable turning insert Grade: WBK30 (CBN) Manufacturer: Walter Tools Facts Plate size: 12 Thickness: 04 Corner radius: 0.8 Relief angle: 0° (negative) Plate shape: Square 90° Tolerance class: G Special features Chipbreaker: S Series: Walter Schneidstoffsorte - Serie offen Material note: Katalogabhängig Sort description: WBK30 is a Walter CBN grade; verify material suitability in the product matrix Application hint: for hardened and high‑wear machining tasks FAQ Which materials is this insert suitable for? The WBK30 CBN grade is primarily intended for hardened steels and, depending on the specific product matrix, may be suitable for certain castings or superalloys; confirm suitability for the intended material before use. What does the designation WBK30 indicate? WBK30 denotes Walter Tools’ CBN cutting grade optimised for hard, highly abrasive machining conditions and stable wear behaviour. How does the negative 0° relief affect performance? A negative 0° relief increases cutting edge strength and seat stability, which improves process security when using the SNGN120408TM-S WBK30 insert in heavy or interrupted cuts. What is the function of the chipbreaker S? The chipbreaker S is designed to produce controlled chip forms during finishing operations, aiding chip evacuation and protecting the workpiece surface. Is the 0.8 mm corner radius suitable for finishing? A 0.8 mm radius offers a balance between edge strength and surface finish; it is well suited to finishing and semi‑finishing operations where repeatable geometry is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanation. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product from the manufacturer (Walter Tools).
SNGN120412T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Benefit from the combination of a ceramic grade WCK10 for high cutting speeds and a square 90° geometry with a 1.2 mm corner radius for reliable, repeatable turning performance; order directly via Metav Werkzeuge or consult our specialists for grade selection and delivery. SNGN120412T02020 WCK10 — Indexable turning insert, 0° negative rake, 1.2 mm radius (Walter Tools) SNGN120412T02020 WCK10 is an indexable turning insert intended for high‑speed and temperature‑resistant turning applications, featuring a square 90° geometry and a robust ceramic cutting grade. Ceramic grade WCK10 for high cutting speeds Square 90° geometry for stable engagement 0° negative rake for robust edge strength 1.2 mm corner radius for consistent finishes Higher throughput thanks to a ceramic grade built for speed The WCK10 ceramic grade is engineered for high‑speed machining and sustained performance at elevated temperatures. Its composition makes it suitable where conventional carbide grades lose edge integrity, enabling longer cycles between index changes and fewer unplanned interruptions. The combination of a temperature‑resistant cutting material and a defined insert form aims to increase effective cutting time, which translates into improved productivity for batch and series turning tasks. Geometry engineered for stability and surface quality A square 90° geometry delivers predictable tool engagement and stable cutting forces, while the 0° negative rake increases edge robustness for interrupted cuts or heavy engagement. The specified 1.2 mm corner radius helps produce a reliable surface finish and spreads cutting forces to reduce local wear. Together these geometric features support consistent component quality and make the insert a good option for operations demanding repeatable dimensional results. Specification and selection guidance for correct integration The insert is supplied as SNGN120412T02020 in the open Walter series and carries tolerance class G for dimensional precision and interchangeability. The designation and series description indicate a ceramic‑type cutting material; users should verify the specific ISO material group suitability in the product matrix before application. For holder compatibility, choose a turning tool that accepts the SNGN form and the thickness code 04; correct clamping and stable toolholding will fully leverage the insert’s thermal and mechanical strengths. Discuss the SNGN120412T02020 WCK10 with Metav Werkzeuge to confirm the correct grade for the intended ISO material group and secure supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNGN120412T02020-WCK10-WALTER SKU: SNGN120412T02020-WCK10-WALTER Designation: SNGN120412T02020 WCK10 Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Size code: 12 Thickness code: 04 Corner radius: 1.2 Rake angle: 0° (negative) Shape: Square 90° Tolerance class: G Special features Ceramic grade WCK10 Negative rake design Square 90° insert form Indexable turning insert Series: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert designed to machine? The WCK10 ceramic grade is intended for high‑speed and temperature‑resistant machining; suitability for specific ISO material groups should be checked against the product matrix for the SNGN120412T02020 WCK10. How does the 0° negative rake affect cutting behaviour? A 0° negative rake increases edge strength and resistance to chipping, which benefits operations with interrupted cuts or tougher contact conditions when using the SNGN120412T02020 insert. Why choose a square 90° geometry? A square 90° geometry provides a stable cutting edge and predictable engagement angles, contributing to consistent dimensional control and easier toolpath planning when using this insert in turning applications. What is the role of the 1.2 mm corner radius? The 1.2 mm corner radius balances surface finish and tool life by distributing cutting forces over a larger area, reducing local stress and wear on the insert’s cutting edge. What does tolerance class G mean for interchangeability? Tolerance class G indicates standardised dimensional precision for the insert, aiding in reliable replacement and interchange between compatible toolholders and ensuring predictable mounting and runout behaviour. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer.
SNGN120412TM-S WBK30 Wendeplatten - Walter Tools
Take advantage of the combination of CBN-grade wear resistance, robust square 90° geometry, and a 1.2 mm corner radius for reliable heavy-duty hard turning; order the insert via Metav Werkzeuge or consult the technical advisors for process matching. SNGN120412TM-S WBK30 – indexable turning insert, CBN grade, square 90° geometry (Walter Tools) SNGN120412TM-S WBK30 is an indexable turning insert designed for hard and high-wear turning tasks, offering a square 90° cutting geometry for stable cutting conditions in hardened steels and similar materials. CBN grade WBK30 for high wear resistance Square 90° geometry for robust turning Corner radius 1.2 mm for stable edge life Negative 0° clearance for heavy cuts High-performance hard turning with CBN technology The insert combines a CBN cutting grade (WBK30) with a square geometry to deliver consistent performance in demanding turning operations. The use of cubic boron nitride provides excellent hardness and thermal stability, which translates into extended tool life and fewer tool changes under abrasive or high-temperature conditions. With a corner radius of 1.2 mm and a square 90° profile, the design supports predictable chip formation and repeatable dimensional control, making it suitable for series production where process stability is essential. Geometry and chip control engineered for productivity The negative 0° clearance and the specified chipbreaker S create a robust edge capable of withstanding heavy cuts and interrupted machining. This geometry prioritises mechanical strength of the cutting edge and optimises chip flow for reduced re-cutting of chips. As a result, cycle times can be shortened and machine uptime improved. The combination of these features supports a favourable cost-per-part calculation in high-volume or high-stress applications, emphasising efficiency and reduced downstream rework. Material suitability and application guidance The WBK30 grade is intended for hard machining tasks and is particularly targeted at hardened steels; depending on the specific grade matrix, suitability for cast iron or certain superalloys may apply. Material compatibility should be verified against the product matrix before series use. Where surface integrity and repeatable dimensional accuracy are required after hard turning, this insert provides the stable cutting edge and wear resistance necessary to maintain consistent part quality in production settings. Practical integration and procurement clarity The insert is supplied in the standard Walter Tools geometry code with a size reference of 12 mm and a thickness code of 04; it is manufactured to tolerance class G. The catalogue-dependent substrate and coating choices mean that the right variant can be selected to match machining parameters and machine capability. For procurement planning and process integration, Metav Werkzeuge can provide advice on the correct variant and application parameters to ensure the insert delivers the intended productivity and component quality. Contact Metav Werkzeuge to discuss the suitability of the Walter Tools WBK30 inserts for specific hard-turning applications and to request the relevant product matrix and datasheet – info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: SNGN120412TM-S-WBK30-WALTER Type: Indexable turning insert Grade: WBK30 Series: Walter Schneidstoffsorte - Serie offen Item designation: SNGN120412TM-S WBK30 Tolerance class: G Facts Geometry: Square 90° Corner radius: 1.2 mm Size: 12 mm Thickness code: 04 Clearance/rake: 0° (negative) Chipbreaker: S Special features CBN cutting material indication Material dependency: catalogue-dependent Suitable for hardened steels (verify product matrix) Robust design for interrupted or heavy cuts Walter Tools brand FAQ What applications is this insert intended for? This indexable turning insert with WBK30 CBN grade is intended for hard turning and high-wear tasks, primarily in hardened steels; application suitability should be confirmed via the product matrix. How does the WBK30 grade influence tool life? The WBK30 CBN grade increases thermal and wear resistance, which generally extends tool life compared with conventional carbide grades in hard-turning operations. What does the 0° (negative) clearance mean for machining? A negative 0° clearance provides a stronger cutting edge for heavy cuts and interrupted machining, reducing the risk of edge chipping under mechanical load. Hersteller: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SNGN120416T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Take advantage of the combination of high-speed ceramic performance, stable chip control and robust edge life for reliable turning operations; order the SNGN120416T02020 WCK10 insert via Metav Werkzeuge or consult our application specialists for process optimisation. SNGN120416T02020 WCK10 — Indexable turning insert (square 90°, r1.6, 0° negative) by Walter Tools A SNGN120416T02020 WCK10 indexable turning insert engineered for high-speed and temperature-resistant turning applications in demanding production environments. High-speed cutting ceramic WCK10 Square 90° geometry for versatile turning Corner radius 1.6 mm for robust edge Negative 0° relief for stable cutting Delivering higher metal removal rates with ceramic-grade performance The WCK10 grade is a cutting ceramic developed for elevated cutting speeds and thermal resistance. As a result, the insert offers improved cycle times where speed is paramount, while maintaining dimensional stability during sustained operation. The indexable insert format enables fast tool changes and repeatable positioning, reducing machine downtime and supporting continuous production. For machining strategies that prioritise throughput, the ceramic composition promotes stable chip formation and lower flank wear at high temperatures, which translates into predictable tool life and consistent component quality. Robust edge geometry for repeatable accuracy and process reliability The square 90° plate shape combined with a corner radius 1.6 mm provides a balance between strength and cutting detail: the generous radius increases edge robustness under interrupted cuts, while the square form allows multiple effective indexing positions. The negative 0° relief contributes to a firm cutting edge that resists deflection and vibration, improving surface finish stability. Together these design choices yield process reliability and fewer rework cycles, which supports lean production aims and predictable batch outcomes. Material suitability and application guidance for pragmatic tool selection The insert is supplied in the Walter Tools open series and the WCK10 grade is optimised for applications that demand heat resistance and high-speed capability; suitability must be checked against the specific ISO material group and product matrix. Where the workpiece material or cutting conditions are atypical, comparing the grade matrix and trial machining under representative conditions is advised. This pragmatic approach ensures the chosen insert matches the required trade-off between tool life, surface integrity, and cycle time for each job. Practical handling and integration into the machining routine As a square, indexable turning insert with execution code N, the component is compatible with clamping systems designed for SNGN-style plates and benefits from straightforward indexing procedures. The standard tolerance class G assists in achieving consistent repeatability across tool changes. Handling routines that favour controlled cutting parameters and appropriate coolant strategy will maximise the life benefits of the cutting ceramic grade while keeping production predictable and cost-effective. For application advice or stock enquiries for the Walter Tools SNGN120416T02020 WCK10 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a detailed consultation and availability information. Technical Data Article number: SNGN120416T02020-WCK10-WALTER Product designation: SNGN120416T02020 WCK10 Brand: Walter Tools Facts Plate size: 12 Plate thickness: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Tolerance class: G Special features Cutting grade: WCK10 Series: Walter Schneidstoffsorte - Serie offen Plate shape: Quadrat 90° Execution: N Material: Katalogabhängig FAQ What materials is this insert intended for? The SNGN120416T02020 WCK10 insert uses a ceramic-based grade optimised for high-speed and temperature-resistant machining; final suitability should be confirmed against the specific ISO material group in the product matrix. How does the corner radius affect machining performance? A corner radius of 1.6 mm increases edge strength and resistance to chipping during interrupted cuts, enhancing the insert's durability and contributing to consistent surface quality with repeated indexing. What advantages does the negative 0° relief bring? The negative 0° relief provides a stable cutting edge and reduced tendency to deflect under load, which supports process reliability and steady surface finish during heavy or interrupted turning. Can the insert be used for finishing as well as roughing? The square geometry and ceramic grade allow flexible use; depending on cutting parameters and the chosen insert grade, the component can be applied to both roughing and higher-speed finishing operations when matched correctly to the workpiece material. How many effective cutting edges are available on this plate shape? The square 90° format offers multiple indexable positions, allowing several usable edges before replacement; this supports economical use and quick changeovers in production. Walter Tools: The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are used solely for explanation. There is no connection between our company and the mentioned brands beyond offering original, factory-new products from the manufacturer.
SNGN120416TM-S WBK30 Wendeplatten - Walter Tools
High-performance CBN cutting geometry combined with a 1.6 mm corner radius ensures stable material removal and extended insert life under demanding conditions; the negative 0° rake adds security during heavy roughing. Order the SNGN120416TM-S WBK30 directly via Metav Werkzeuge or ask our consultants if needed. SNGN120416TM-S WBK30 – Turning indexable insert, square 90°, CBN grade (Walter Tools) A versatile indexable turning insert designed for hard and highly abrasive workpiece materials, offering a square 90° form and CBN cutting grade for reliable, high-performance turning operations CBN grade WBK30 for hardened materials Square 90° form, 1.6 mm corner radius Negative 0° rake for secure roughing Chipbreaker S for controlled chip formation Consistent performance for hard turning and demanding operations The CBN-based grade WBK30 provides a robust solution where conventional carbide wears prematurely. As a purpose-designed indexable insert, it delivers repeatable cutting performance in high-wear applications, translating to longer cycles between tool changes and improved uptime. The square 90° geometry, paired with a 1.6 mm corner radius, balances edge strength and accessibility for external turning, while the negative 0° rake offers added stability in interrupted cuts and heavy roughing. These engineered attributes reduce process variation and support predictable component tolerances in serial production. Precision and chip control for safer machining cycles The insert’s chipbreaker S promotes controlled chip formation, reducing the risk of long, entangling swarf that can interrupt automated machining. With a tolerance class G, dimensional consistency between inserts is ensured, supporting tight reproducibility on turned parts. For users less familiar with CBN, it is a superabrasive optimised for hard and highly abrasive alloys; suitability for specific workpiece materials should be confirmed against the product matrix to match grade and application. The combination of chip control and tolerance stability improves machining safety and reduces secondary operations. Process security and economical tool life Built for stable cutting in challenging materials, this insert helps to lower overall tooling costs by extending productive life relative to standard grades when used in appropriate applications. The WBK30 grade emphasises wear resistance, making it a cost-effective choice in high-volume or high-abrasion environments. Where process reliability is a priority, the insert’s geometry and material pairing reduce unplanned downtime and support consistent surface finish quality, enhancing both operational efficiency and output predictability. Application guidance and selection tips The insert is suited to hard turning and applications involving hardened steels or certain cast and superalloy materials, depending on the selected grade matrix. The designation indicates a square form with a 90° approach angle and a robust corner radius, making it appropriate for external turning and heavier cuts. When selecting tooling, verify the grade’s compatibility with the workpiece through the product matrix and consider cutting parameters that exploit CBN’s strength: moderate feed, appropriate depth of cut for the grade, and rigid fixturing. For tailored recommendations, technical consultation is available to align the insert grade with the machining task. For application-specific advice or to request availability of the Walter Tools SNGN120416TM-S WBK30, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with selection and delivery options Technical data Article number: SNGN120416TM-S-WBK30-WALTER Designation: SNGN120416TM-S WBK30 Product type: Turning indexable insert Manufacturer: Walter Tools Numbers / core technical data Insert size: 12 mm Corner radius: 1.6 mm Thickness: 4 mm Free angle (rake): 0° (negative) Shape: Square 90° Tolerance class: G Designs / special features Cutting material: CBN grade WBK30 Chipbreaker: S Series: Walter Schneidstoffsorte - Serie offen Material information: Catalogue-dependent Application note: Workpiece suitability requires checking the product matrix FAQ What materials is this insert intended for? The SNGN120416TM-S WBK30 is produced in a CBN grade intended primarily for hardened steels and highly abrasive alloys; compatibility should be verified against the product matrix for the exact application. How does the chipbreaker affect machining? The chipbreaker S promotes short, controlled chips that reduce swarf entanglement and improve process safety during turning operations. Is the insert suitable for heavy roughing? Yes. The negative 0° rake and the square 90° geometry provide stability for heavier cuts and interrupted cuts while maintaining edge strength. What dimensional information is critical for tool setup? Key data are the insert size (12 mm), corner radius (1.6 mm), thickness (4 mm) and the tolerance class G, which together determine seat fit and expected repeatability. Can this insert be used for finishing passes? The insert is optimised for robust turning; for fine finishing, selection of grade and cutting parameters should be guided by the desired surface finish and the material being machined. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names are used here for identification and explanation only; there is no affiliation or partnership implied between Metav Werkzeuge and the manufacturers mentioned. Walter Tools is part of the global Walter AG brand family and operates within the Sandvik Group framework.
SNGN120708T01020 WWS20 WWS20 Wendeplatten - Walter Tools
Take advantage of the high-speed ceramic grade WWS20, robust square 90° geometry and a 0° negative rake for consistent, temperature-resistant turning performance; order directly via Metav Werkzeuge or request guidance from our consultants for grade selection and process optimisation. SNGN120708T01020 WWS20 – Indexable turning insert, ceramic grade WWS20, square 90° A SNGN120708T01020 WWS20 indexable turning insert designed for high cutting speeds and temperature-stable operations in demanding turning applications Ceramic grade WWS20 for high-speed machining Square 90° geometry for robust turning 0° negative rake for stable chip control Greater productivity through a ceramic cutting grade The adopted WWS20 cutting grade is a ceramic formulation optimised for elevated cutting speeds and thermal stability. This composition reduces wear when temperatures rise, enabling longer tool engagement at higher spindle speeds. By choosing a ceramic grade, shops can expect fewer tool changes during high-speed finishing passes, which translates into improved equipment utilisation and a reduced cost per component. The insert’s material behaviour is explained clearly so shops without deep ceramics experience can understand the practical advantage: ceramics resist edge softening at temperature, keeping the cutting edge sharper for longer under suitable cutting conditions. Robust geometry for consistent turning results Featuring a square 90° shape and a 0.8 mm corner radius, the insert provides a stable cutting platform that supports both interrupted and continuous cuts. The square form delivers four usable cutting edges per insert, improving economy, while the 90° lead angle helps to distribute cutting forces evenly. The 0° negative rake enhances mechanical strength at the cutting edge, which is particularly beneficial when encountering harder layers or irregular surfaces. In short, the geometry contributes to repeatable surface finishes and predictable tool life in production environments. Selection guidance and process benefits The insert is part of the Walter open series and is designated for applications where thermal resistance and speed are priorities; actual suitability should be verified against the product matrix for the intended workpiece material. Because the grade is optimised for temperature-stable cutting, it works especially well for high-speed finishing of heat-tolerant steels and similar materials when parameters are matched correctly. For process planners, the key benefits are less downtime for insert changes, consistent surface quality and the possibility to shorten cycle times by increasing cutting velocity where the machine and workholding permit. Practical note on integration and handling The insert is supplied in the standard SNGN format with the ISO designation for straightforward machine-side integration. Its tolerance class G and standardised form make toolholder compatibility routine in modern turning tool systems. Although the specific catalogue indicates that some parameters are catalogue-dependent, the principal measurable values—corner radius, plate size and negative rake—allow planners to determine clamping and cutting parameter windows quickly. For machining centres moving to higher productivity, this insert represents a reliable step towards faster finishing cycles without sacrificing process stability. Contact Metav Werkzeuge for exact grade matching and technical assistance with the SNGN120708T01020 WWS20 insert; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: SNGN120708T01020-WWS20-WALTER ISO designation: SNGN120708T01020 WWS20 Product type: Indexable turning insert (drehwendeschneidplatte) Series: Walter Schneidstoffsorte - Serie offen Facts Insert size: 12 Thickness code: 07 Corner radius: 0.8 mm Rake angle: 0° (negative) Plate form: Square 90° Tolerance class: G Special features Grade: WWS20 (ceramic) Material information: catalogue dependent Intended for high cutting speeds and temperature‑stable machining Square geometry for four cutting edges and robust turning Suitable where chip and edge stability at high temperatures is required FAQ What materials is this insert intended for? The WWS20 ceramic grade is formulated for high‑speed and temperature‑stable machining; suitability for specific workpiece materials should be checked in the product matrix for the SNGN120708T01020 WWS20 insert. What are the key geometric specifications of the insert? The insert is a square 90° format with a 0.8 mm corner radius and a 0° negative rake, offering four usable edges and enhanced edge strength for robust turning. How does the 0° negative rake affect cutting performance? A 0° negative rake increases mechanical edge strength and stabilises cutting forces, which helps when machining harder surfaces or during interrupted cuts with the WWS20 ceramic grade. Can the insert be used for finishing and semi‑finishing operations? Yes. The ceramic grade and square geometry support high‑speed finishing and can be effective in semi‑finishing if cutting parameters align with machine capability and the product matrix recommendations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SNGN120712T01020 WIS10 WIS10 Wendeplatten - Walter Tools
Benefit from the combination of SiAlON cutting ceramic for high-speed performance, a 1.2 mm corner radius that supports dependable edge life and a 0° (negative) rake for stable turning results — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNGN120712T01020 WIS10 – Turning indexable insert, SiAlON ceramic, square 90° – Walter Tools The SNGN120712T01020 WIS10 is a square 90° indexable insert engineered for high-speed, temperature-resistant turning applications where reliable edge stability and repeatable results are essential SiAlON ceramic for high cutting speeds Square 90° geometry for secure clamping 1.2 mm corner radius for stable edge life Engineered for predictable high-speed productivity The insert is built on a SiAlON cutting ceramic grade, formulated for high cutting speeds and elevated temperature resistance. This ceramic base enables short cycle times when matched with the correct machining parameters and suitable coolant strategy. The negative 0° free angle (listed as 0° (negative)) contributes to a robust rake configuration that reduces the tendency to dig in under interrupted cuts, promoting stable chip formation and consistent tool life. When used within its intended ISO material groups, the design reduces process variability and helps to maintain throughput in serial turning operations. Designed for process security and consistent surface quality A square 90° geometry combined with a 1.2 mm corner radius delivers a balance between edge strength and the ability to produce repeatable surface finishes. The square form provides four indexed cutting edges, supporting economical re-indexing during production runs and lowering tooling expenditure per component. The modest corner radius helps avoid premature edge chipping while still permitting reliable dimensional control in semi-finish and finishing passes. These characteristics are particularly advantageous on machines where cycle time and reproducibility are measured performance indicators. Clear guidance on material suitability and application The insert belongs to the Walter Schneidstoffsorte series indicated as WIS10, a SiAlON-based grade intended for demanding, temperature-prone turning operations. The exact applicability depends on the workpiece material and the product matrix; therefore, verify the compatibility against the specified ISO material group before selecting cutting data. Note that the tool’s material reference is given as catalogue dependent, so recommended feeds, speeds and holder combinations should be taken from the official product matrix or confirmed with tooling specialists to ensure optimal life and surface integrity. For unfamiliar applications, technical consultation is advised to match insert geometry to the desired machining outcome. For tailored cutting data, availability and to secure supply of the SNGN120712T01020 WIS10 insert contact Metav Werkzeuge; our technical consultants will advise on compatible toolholders and process parameters. Technical Data Article number: SNGN120712T01020-WIS10-WALTER Designation: SNGN120712T01020 WIS10 Manufacturer brand: Walter Tools Product type: Turning indexable insert Facts Size: 12 Corner radius: 1.2 mm Free angle: 0° (negative) Thickness code: 07 Tolerance class: G Form: Square 90° Special features SiAlON cutting ceramic (Walter Schneidstoffsorte WIS10) Series: Walter Schneidstoffsorte - Serie offen Material specification: catalogue dependent Geometry suited to high-speed and temperature-resistant machining Four cutting edges per insert for economical indexing FAQ What materials is this insert suitable for? The SNGN120712T01020 WIS10 insert is based on a SiAlON cutting ceramic designed for high-speed and temperature-resistant turning; material suitability must be checked against the product matrix for the appropriate ISO material group. Is the 1.2 mm corner radius good for finishing? A 1.2 mm corner radius provides a compromise between edge strength and surface quality; it is suitable for semi-finish and many finishing passes when correct feeds and speeds are applied to the SNGN120712T01020 WIS10. How does the negative 0° rake affect machining? The 0° (negative) rake enhances edge robustness and reduces the risk of insert breakage under interrupted cuts, contributing to process security and stable chip formation with this Walter Tools insert. Can this insert be re-indexed to use all edges? Yes, the square 90° geometry supplies multiple cutting edges that can be indexed to extend service life and lower tooling cost per component. Where to find the recommended cutting data for this insert? Refer to the Walter product matrix or request cutting data through Metav Werkzeuge; the SNGN120712T01020 WIS10’s best performance requires matching holder type and machining parameters to the specific application. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the respective trademark holders. The offered item is an original, factory-new product of the manufacturer.
SNGN120712T01020 WWS20 WWS20 Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature stability, robust geometry and predictable cutting behaviour for efficient turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for application matching. SNGN120712T01020 WWS20 – Square 90° turning indexable insert, ceramic grade (Walter Tools) A SNGN120712T01020 WWS20 turning insert designed for temperature-resistant, high-speed turning applications where a ceramic grade offers improved wear resistance. Ceramic grade WWS20 for high-speed cutting Square 90° geometry for versatile turning Corner radius 1.2 mm for improved edge strength Negative rake 0° for stable cutting forces Increased machining stability for demanding cuts The Walter Schneidstoffsorte WWS20 is a ceramic grade developed for operations that require resistance to elevated temperatures and sustained cutting speeds. As a result, the insert provides improved tool life in thermally demanding cycles and reduced flank wear when compared with conventional carbide grades. The combination of a negative rake (0°) and a compact square geometry supports consistent cutting forces, which translates into predictable tool behaviour and easier process planning. For users unfamiliar with ceramic grades: they prioritise hardness and heat resistance over ductility, making them suitable for finishing and high-speed roughing of compatible workpiece materials. Geometry that balances versatility and repeatability The square, 90° form offers four usable cutting edges and a neutral presentation for turning operations where consistent edge orientation is important. The corner radius of 1.2 mm contributes to a stronger cutting edge, helping to resist chipping under intermittent loads while still allowing acceptable surface quality in many finishing tasks. The insert’s geometry and the tolerance class G give a reliable seating and repeatability in toolholders designed for the SNGN pattern, supporting shorter setup times and reproducible results across batches. Clear technical handling and installation advantages Marked by its designation and size coding, the insert is identified as SNGN format with a size indicator of 12 and a thickness code of 07, which aligns with standard turning insert conventions. This makes selection, stocking and replacement straightforward in production environments that use common indexable systems. The robust design with a negative free angle stabilises the tool–workpiece interface, reducing vibration sensitivity in many clamping arrangements. Where exact toolholder compatibility is required, refer to the machine and holder matrix or consult Metav Werkzeuge for verified pairings. Process reliability and manufacturer pedigree Produced under the Walter Tools identity, the insert benefits from the manufacturer’s focus on precision tooling and consistent product performance. The open series designation indicates that the WWS20 grade is intended for a range of applications; however, suitability should be confirmed against the product’s ISO workpiece group matrix. The documented attributes of Walter Tools support predictable machining outcomes, which is particularly valuable in serial production where repeatability and tool life influence cost per component. For machining scenarios demanding ceramic performance and predictable edge life, contact Metav Werkzeuge to discuss application suitability of the SNGN120712T01020 WWS20 and to receive tailored recommendations – eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SNGN120712T01020-WWS20-WALTER Article designation: SNGN120712T01020 WWS20 Product type: Turning indexable insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Grade/series: WWS20; Walter Schneidstoffsorte - Serie offen Facts Size designation: 12 Corner radius: 1.2 mm Thickness code: 07 Geometry: Square 90° Free angle: 0° (negative) Tolerance class: G Special features Coating / material: Katalogabhängig Grade type: Schneidkeramik (ceramic grade) Execution: N Series notes: High-temperature resistance; suitability per ISO workpiece matrix Designation without grade: SNGN120712T01020 Full ISO designation: SNGN120712T01020 WWS20 Additional informations: Sorteneinsatz / Bedeutung: Werkstoffeignung anhand der konkreten Produktmatrix prüfen FAQ What materials is this ceramic grade suitable for? The WWS20 ceramic grade is designed for high-speed and temperature-resistant turning; suitability depends on the ISO workpiece group and should be checked against the product matrix for the SNGN120712T01020 WWS20 insert. How does the 0° negative rake affect cutting performance? A 0° (negative) rake increases cutting stability and edge strength, which helps the insert resist shock and maintain steady cutting forces during machining. How many cutting edges are available per insert and what is the geometry? The square 90° geometry provides four usable cutting edges and a robust profile suitable for a range of turning tasks. What role does the 1.2 mm corner radius play in surface finish and tool life? A 1.2 mm corner radius strengthens the cutting edge to reduce chipping; it balances edge life with achievable surface quality depending on feed and depth of cut. Is the insert compatible with standard SNGN toolholders? The designation and format correspond to the SNGN family; confirm exact holder compatibility with the toolholder manufacturer or consult Metav Werkzeuge for verified pairings. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original and factory-new from the manufacturer.
SNGN120712T02020 WCK10 WCK10 Wendeplatten - Walter Tools
Take advantage of a high-speed, temperature-resistant cutting grade combined with a robust square geometry and precise tolerance class for consistent turning results; order directly via Metav Werkzeuge or consult the specialists for application guidance. SNGN120712T02020 WCK10 turning indexable insert by Walter Tools — ceramic cutting grade for high-speed machining SNGN120712T02020 WCK10 is a square turning insert designed for demanding, temperature-stable operations in high-speed turning applications High-speed ceramic cutting grade WCK10 Square 90° form for versatile corner usage 1.2 mm corner radius for stable edge life 0° (negative) rake for robust cutting performance Faster cycles through a high-speed cutting grade The WCK10 cutting grade is a ceramic cutting grade developed for high cutting speeds and thermal stability, enabling shorter cycle times in many turning operations. Thanks to this composition, the insert supports elevated cutting parameters that can increase productivity without sacrificing component integrity. The material’s behaviour under heat results in a stable cutting edge when matched to appropriate ISO workpiece groups, reducing the frequency of insert changes and supporting uninterrupted production runs. Robust geometry for predictable tool life A square 90° form with a 1.2 mm corner radius gives the insert structural rigidity and multiple cutting corners, which is advantageous for general-purpose turning and semi-finish operations. The 0° (negative) rake produces a stronger cutting edge that is less prone to chipping during interrupted cuts or heavy depth passes. This geometry translates into reliable edge strength and more predictable wear, which helps planners define tool-change intervals and maintain process stability. Consistent interchangeability with defined tolerances Manufactured to tolerance class G, the insert delivers consistent fit and repeatability across toolholders specified for this designation. Precise tolerances reduce the need for individual adjustments at each changeover and support faster setup times on the machine. Defined dimensional consistency also simplifies inventory management and supports automated tool-change strategies where repeatability is critical. Thermal resilience for temperature-stressed operations The open-series Walter cutting grade emphasises temperature resistance, making the insert particularly suitable where high surface temperatures are expected. The ceramic composition resists softening and maintains cutting geometry under heat, which benefits surface finish and dimensional control in many alloys when the correct cutting data are applied. For exact workpiece suitability, the product matrix should be consulted to match the grade to the intended ISO material group. Clear specifications for confident tooling decisions Key data such as plate form, corner radius, free angle and series designation are stated to aid selection and integration into existing tooling systems. The insert’s classification in the Walter Schneidstoffsorte series provides a reference point for engineers assessing process windows and for purchasing teams managing compatible parts lists. Technical clarity supports faster decisions and reduces trial-and-error at the machine. Handling, clamping and economy of use The insert’s configuration allows multiple indexing options per corner, supporting extended cutting life and lower tooling cost per component. Correct clamping and secure seating in a matched toolholder preserve the tolerance benefits and edge security; regular checks for seating and rotation ensure the geometry’s advantages are realised. When paired with suitable cutting data and holder rigidity, the indexable system improves overall process economy. For machining tasks that demand high cutting speeds and thermal stability, consider Walter Tools inserts — contact Metav Werkzeuge for tailored advice and application support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNGN120712T02020-WCK10-WALTER Product type: Turning indexable insert Series: Walter Schneidstoffsorte - Serie offen Facts Plate form: Quadrate 90° Plate size: 12 Plate thickness: 07 Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: G Special features Cutting grade: WCK10 (ceramic cutting grade) Designation: SNGN120712T02020 WCK10 Series note: suitability by product matrix to be checked Application note: engineered for high cutting speeds and temperature resistance FAQ What materials is this insert intended for? The SNGN120712T02020 WCK10 insert is a ceramic cutting grade designed for high-speed, temperature-stable machining; specific material suitability should be verified in the Walter product matrix for the matching ISO workpiece group. How does the 0° negative free angle affect performance? A 0° (negative) free angle increases edge strength and resistance to chipping, which benefits interrupted cuts and heavier depth-of-cut applications when using the SNGN120712T02020 insert. What does tolerance class G mean for toolholders? Tolerance class G indicates consistent dimensional accuracy for reliable fit and repeatability in compatible toolholders, supporting predictable changeover and process stability with this insert. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory-new product of Walter Tools.
SNGX0904ANN-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the WKP25S grade and the controlled chip formation from the F57 breaker to maintain steady throughput and consistent surface quality; order the inserts directly via Metav Werkzeuge or consult our technical team for application-specific selection. SNGX0904ANN-F57 WKP25S square 90° milling insert — Tiger·tec Silver grade from Walter Tools, for steel and cast iron machining A SNGX0904ANN-F57 WKP25S is a square, 90° indexable milling insert designed for robust shoulder and face milling operations in steel and cast iron applications. Tiger·tec Silver coating for improved tool life WKP25S grade for steel and cast iron machining Square 90° geometry for stable shoulder milling 0° negative rake for heavy-duty cutting F57 chipbreaker for controlled chip formation Consistent cutting performance through advanced grade and coating The combination of the WKP25S carbide grade and the Tiger·tec Silver coating delivers a balance of abrasion resistance and edge stability that supports reliable machining of steel and cast iron. The coating reduces adhesion and thermal loading at the cutting edge, which in turn extends effective tool life and helps maintain dimensional accuracy across longer tool cycles. For production-focused environments this means fewer tool changes and more predictable process windows, enhancing overall productivity. Geometry engineered for stability and predictable chips The square 90° shape and negative rake 0° geometry provide a stable cutting edge that resists chipping under interrupted cuts and shoulder milling. The F57 chipbreaker is tuned to produce short, easily evacuable chips with the listed workpiece groups, reducing risk of re-cutting and improving surface finish consistency. The solid design supports heavier depth-of-cut strategies while maintaining a controllable cutting force, which benefits both roughing and semi-finishing cycles. Process guidance and application advantages in everyday use Tolerance class G and execution code X reflect production-grade consistency for serial machining. The insert thickness and form factor suit common toolholder systems for square inserts, enabling straightforward integration into existing tooling setups. Where medium- to high-volume removal rates are required on steel or cast iron, this insert offers a productive compromise between wear resistance and cutting-edge toughness. For application-specific data—such as recommended speeds, feeds and coolant strategy—Metav Werkzeuge’s consultants provide tailored recommendations to match the machining task and material grade. For order enquiries or to discuss process integration with Metav Werkzeuge, contact our technical advisers at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt specification support and availability information Technical Data SKU: SNGX0904ANN-F57-WKP25S-WALTER Label: Fräswendeschneidplatte SNGX0904ANN-F57 WKP25S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Grade: WKP25S Facts Insert size: 09 Thickness: 04 Shape: Square 90° Rake angle: 0° (negative) Chipbreaker: F57 Tolerance class: G Special features Coated carbide (Tiger·tec Silver) Material compatibility: steel (P), cast iron (K) Execution: X Robust edge for interrupted cuts Designed for shoulder and face milling FAQ Which materials is this insert intended for? The SNGX0904ANN-F57 WKP25S from Walter Tools is designed primarily for machining steel (ISO group P) and cast iron (ISO group K), with the grade and chipbreaker engineered for those material behaviours. What benefit does the F57 chipbreaker provide? The F57 chipbreaker promotes short, controlled chips that evacuate reliably during shoulder and interrupted milling, reducing the risk of chip entanglement and improving surface integrity. How does the square 90° geometry affect machining? Square 90° geometry offers a stable support for shoulder milling and enables predictable radial engagement; combined with the negative 0° rake, it increases edge robustness for heavier cuts. What is the coating and how does it help? The Tiger·tec Silver coating on this indexable insert reduces adhesion and thermal loading at the cutting edge, improving wear resistance and supporting longer tool life in demanding steel and cast iron operations. Which SKU and product designation should be ordered for this configuration? Order the insert using SKU SNGX0904ANN-F57-WKP25S-WALTER or reference the designation SNGX0904ANN-F57 WKP25S from Walter Tools for the exact grade and chipbreaker combination. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX0904ANN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a WKP35G grade optimised for steel and cast iron, and a square 90° geometry that delivers stable, productive milling results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNGX0904ANN-F57 WKP35G – Square 90° indexable milling insert for steel and cast iron, Walter Tools A SNGX0904ANN-F57 WKP35G is a square 90° indexable milling insert engineered for robust material removal in steel and cast iron applications, combining a coated carbide grade with a dedicated chipbreaker for dependable performance. Tiger·tec Gold coating for high wear resistance Optimised for steel and cast iron machining Square 90° geometry for versatile milling Negative 0° rake for robust cutting action Maximise cutting performance with a wear-resistant grade The insert’s WKP35G grade, part of the Tiger·tec Gold series, delivers consistent edge life and improved wear resistance under the thermal and mechanical stresses common in steel and cast iron turning and milling. This coated carbide formulation is designed to handle the typical heat generation when machining P-group (steel) materials and the abrasive, breaking-chip behaviour of K-group (cast iron) materials. The result is predictable tool life and fewer index changes, which supports higher uptime and lower machining costs per component. Geometry engineered for stability and secure engagement The square 90° shape and 0° negative rake combine to provide a robust cutting geometry that resists edge chipping and supports heavy cuts and shoulder operations. The insert’s F57 chipbreaker is optimised to produce controlled chip formation across a range of feed rates, reducing the risk of built-up edge and improving surface finish consistency. With a compact thickness (04 series) and a neutral relief angle, the design favours secure clamping in standard indexable milling holders and enables reliable performance in roughing and medium-finishing passes. Predictable productivity and process security in production Using a coated insert from a recognised series improves process security and repeatability on series production runs. The grade’s balance of toughness and wear resistance reduces unexpected downtime caused by premature edge failure and helps maintain dimensional stability across batches. For manufacturers seeking steady cycle times and consistent quality, the combination of the insert’s geometry, Tiger·tec Gold coating and WKP35G substrate offers a rational, cost-effective upgrade to conventional grades, translating directly into lower overall tooling costs and more stable machining processes. Contact Metav Werkzeuge for tailored application guidance on Walter Tools Tiger·tec Gold inserts and to discuss optimal holder and cutting parameter recommendations Technical data SKU: SNGX0904ANN-F57-WKP35G-WALTER Article designation: SNGX0904ANN-F57 WKP35G Product type: Fräswendeschneidplatte (indexable milling insert) Series: Tiger-tec Gold Grade: WKP35G Facts Insert size: 09 Thickness: 04 Geometry: Square 90° Relief/clearance: 0° (negative) Chipbreaker: F57 Tolerance class: G Special features Material group: P / K (steel / cast iron) Coated carbide grade Execution: X Main applications: general milling, roughing and medium finishing in steel and cast iron FAQ What materials is this insert suitable for? The insert is specified for steel and cast iron applications: the WKP35G grade and the Tiger·tec Gold series are optimised for P- and K-group materials in ISO 513. Which cutting tasks benefit most from this geometry? Square 90° geometry with a 0° negative rake is particularly suitable for shoulder milling and robust face milling where secure clamping and resistance to edge chipping are priorities. How does the F57 chipbreaker affect chip control? The F57 chipbreaker is designed to produce short, controllable chips across typical feed ranges for steel and cast iron, helping to prevent chip entanglement and improving process reliability. Can this insert be used for finishing operations? While primarily aimed at productive roughing and medium finishing, the coated grade and stable cutting edge allow for decent surface finishes when used with appropriate parameters and tooling rigidity. Is the grade part of a known coating technology? Yes, the insert belongs to the Tiger·tec Gold series, combining a tailored coating and substrate balance to improve edge life and wear resistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between the seller and the named manufacturers. The item offered is an original, factory-new product of the manufacturer.
SNGX0904ANN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a high‑performance grade and proven chip control for reliable milling of stainless steels and heat‑resistant superalloys; the combination of Tiger‑tec Gold coating and a robust WSM35G substrate delivers stable cutting edges and extended tool life. Order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. SNGX0904ANN-F57 WSM35G indexable milling insert – Tiger‑tec Gold grade for stainless steels and superalloys (Walter Tools) The SNGX0904ANN-F57 WSM35G is an indexable milling insert designed for demanding milling of stainless steels and heat‑resistant superalloys, featuring a square 90° form and Tiger‑tec Gold coating for improved process stability. Tiger‑tec Gold coating for long tool life Square 90° insert for versatile milling Chipbreaker F57 for secure chip control 0° negative rake for robust cutting edge Maximise productivity through proven cutting performance The Tiger‑tec Gold WSM35G grade is engineered for consistent machining results in tough alloys. The combination of a coated cemented carbide substrate and optimised surface treatment supports a stable cutting edge, reducing the need for frequent index changes and minimising unplanned downtime. This results in measurable productivity gains, especially in batch runs and serial production where repeatability and predictable wear behaviour are essential. Reliable machining of stainless steels and superalloys Grade WSM35G is formulated specifically for materials that challenge heat dissipation and tend to form built‑up edges. The insert’s geometry and chipbreaker F57 promote controlled chip formation and evacuation, which lowers flank wear and helps maintain surface finish quality. For operations on stainless steels and heat‑resistant superalloys, this leads to fewer rework cycles and steadier process windows. Robust geometry for secure engagement and tool life The square 90° form and 0° (negative) rake provide a robust cutting condition that tolerates heavier entry angles and interrupted cuts. This geometry improves stability in shoulder milling and heavy side milling tasks, delivering safer machining in less rigid setups. The standardised tolerance class G ensures interchangeability and consistent seating across toolholders designed for this insert type. Easy integration and predictable results With a compact thickness and standard size designation, the insert slots into common milling tooling systems without special adaptations. The combination of material suitability (S / M) and the Tiger‑tec surface treatment means the cutting edge is optimised for both heat resistance and wear control. The result is simplified process planning: consistent cycle times, predictable insert change intervals and reliable surface quality. Choose Walter Tools' Tiger‑tec Gold grade WSM35G for demanding stainless and superalloy milling — contact Metav Werkzeuge for tailored application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SNGX0904ANN-F57-WSM35G-WALTER Label: Fräswendeschneidplatte SNGX0904ANN-F57 WSM35G Walter Tools Manufacturer: Walter Tools Core specifications Insert form: Square 90° Size: 09 Thickness: 04 Clearance angle: 0° (negative) Chipbreaker: F57 Tolerance class: G Materials & features Grade: WSM35G Coating technology: Tiger‑tec Gold Suitable for: stainless steels (M), superalloys/titanium (S) Execution: X Product type: Fräswendeschneidplatte Material designation: S / M FAQ What materials is this insert suited for? The SNGX0904ANN-F57 WSM35G insert is designed primarily for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering enhanced wear and heat resistance. How does the chipbreaker F57 improve performance? Chipbreaker F57 on this Tiger‑tec Gold insert promotes stable chip formation and controlled evacuation, which supports consistent surface finish and reduces edge loading during milling operations. Is the insert suitable for heavy shoulder milling? Yes — the square 90° geometry combined with a 0° negative rake provides a robust cutting edge that tolerates heavier engagement and interrupted cuts in less rigid setups. Can this grade reduce downtime in production? The WSM35G grade focuses on edge stability and wear resistance, which helps extend insert life and minimise unscheduled tool changes, improving overall production uptime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX0904ANN-F67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of thermal‑resistant Tiger·tec Gold coating and a secure negative rake geometry for consistent performance when milling stainless steels and superalloys; order directly via Metav Werkzeuge or consult our specialists for application support. SNGX0904ANN-F67 WSM35G milling insert — Tiger·tec Gold coating, 0° negative rake, Walter Tools The SNGX0904ANN-F67 WSM35G is a square 90° milling insert engineered for demanding milling tasks on stainless steels and heat‑resistant superalloys, delivering stable cutting and reliable chip control in heavy‑duty applications. Tiger·tec Gold coating for high thermal resistance Suitable for stainless steel and heat‑resistant alloys Square 90° insert for versatile milling operations Negative 0° rake for secure cutting edge stability Built for high temperatures and challenging materials The insert grade is WSM35G, a coated carbide engineered within the Tiger·tec Gold series to withstand elevated cutting temperatures and aggressive contact conditions. This makes the insert especially effective when machining stainless steels and superalloys, materials that tend to work‑harden and generate heat at the cutting zone. The coating improves thermal resistance and reduces crater wear, so the cutting edge remains productive over longer cycles, which directly contributes to fewer tool changes and higher process efficiency. Consistent chip formation and edge stability for reliable production A negative 0° rake combined with the chipbreaker F67 provides controlled chip shapes and helps to avoid built‑up edge when machining sticky or gummy materials. The square 90° body offers four usable cutting corners and delivers rigidity in shoulder and face milling operations, supporting stable cutting forces and improved surface finish. The result is reproducible performance on batch runs and easier spindle‑speed optimisation, enabling more predictable machining cycles and reduced rework. Practical benefits for shopfloor productivity and component quality The insert’s format (insert size 09, thickness 04) and tolerance class G ensure interchangeability and simple installation in standard milling cutters, while the robust cutting grade reduces the risk of premature edge failure. For production planners this translates into less downtime and a more consistent part quality, particularly when working with materials prone to work hardening or thermal sensitivity. Where tight process windows are required, the grade’s thermal resilience and chip control support a cost‑efficient machining strategy with fewer interruptions. For secure milling of stainless steels and superalloys with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored advice and reliable supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SNGX0904ANN-F67-WSM35G-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert Designation: SNGX0904ANN-F67 WSM35G Facts Insert size: 09 Thickness: 04 Shape: Square 90° Rake angle: 0° (negative) Chipbreaker: F67 Tolerance class: G Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Material suitability: stainless steels (M), heat‑resistant superalloys and titanium (S) Execution: X Series: Tiger·tec Gold FAQ What materials is this insert designed to machine? The SNGX0904ANN‑F67 WSM35G insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering secure chip formation and thermal resistance. How does the 0° negative rake affect machining? A 0° negative rake increases edge strength and reduces chipping risk in interrupted or heavy cuts; the insert’s geometry supports stable cutting when machining tough alloys. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances thermal resistance and wear protection on the cutting edge, which helps maintain tool life and consistent surface quality on demanding materials. Is the insert compatible with standard 90° milling cutters? Yes, the square 90° shape and tolerance class G make the insert suitable for conventional holders designed for that format; size 09 and thickness 04 conform to common cutter specifications. What kind of chip control can be expected with the F67 chipbreaker? The F67 chipbreaker produces controlled chip shapes for reliable evacuation and reduced risk of built‑up edge, particularly beneficial when machining stainless steels and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
SNGX0904ZNN-F57 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger·tec Gold technology, proven chip control with the F57 chipbreaker and a robust square 90° geometry for consistent cast iron machining. Order directly via Metav Werkzeuge or contact the consultants for application advice. SNGX0904ZNN-F57 WKK25G milling insert – Tiger·tec Gold, for cast iron (Walter Tools) The SNGX0904ZNN-F57 WKK25G is a square, 90° indexable milling insert engineered for productive and reliable machining of cast iron components. Tiger·tec Gold coating for high wear resistance Optimised F57 chipbreaker for cast iron Square 90° geometry for robust milling 0° negative rake for stable cutting Higher productivity for abrasive cast iron The WKK25G grade, implemented within Walter Tools' Tiger·tec Gold family, is a coated carbide solution tailored to the demands of the ISO K group. It resists the abrasive wear typical of cast iron and copes with frequently short, breaking chips; this translates into high wear resistance and longer tool life under interrupted or heavy engagement. The coating technology reduces flank wear and supports a stable cutting edge, so fewer tool changes are required and production cycles remain smooth. Secure geometry that reduces downtime A square 90° insert form, combined with the 0° negative rake, provides structural strength and predictable cutting behaviour during milling operations. The robust geometry makes the insert suitable for medium to heavy cuts where rigidity and repeatability matter. The insert's designation (size 09, thickness 04) ensures solid pocket support and consistent indexability, which helps maintain surface quality and reduces setup iterations in high-volume production. Chip control and process reliability as standard The chipbreaker F57 is optimised for cast iron, promoting optimised chip formation and safe evacuation from the cutting zone. Controlled chip shapes prevent re-cutting and tool damage, improving component finish and machine availability. Combined with the coated carbide grade, this leads to enhanced process security and predictable performance in serial production, supporting consistent part quality and lower unit costs over time. For productive cast iron milling with Walter Tools' Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored application advice and stock information — e‑mail info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: SNGX0904ZNN-F57-WKK25G-WALTER Manufacturer: Walter Tools Product type: milling insert Designation (ISO): SNGX0904ZNN-F57 WKK25G Series: Tiger·tec Gold Grade: WKK25G Chipbreaker: F57 Geometry: Square 90° Rake angle: 0° (negative) Size: 09 Thickness: 04 Execution: X Material code: K Facts Plate size: 09 Plate thickness: 04 Rake angle: 0° (negative) Tolerance class: G Special features Coating technology: Tiger·tec Gold Grade type: WKK25G (coated carbide) Application group: cast iron (ISO K) Chip control: F57 chipbreaker Geometry: Square 90° Robust cutting edge for interrupted cuts Stable indexable design for repeatable positioning FAQ What materials is this insert intended for? The SNGX0904ZNN-F57 WKK25G insert is designed for machining cast iron and is optimised for the ISO K material group. How does the Tiger·tec Gold technology benefit production? Tiger·tec Gold coating on the WKK25G grade provides improved wear resistance and consistent cutting-edge stability, which enhances tool life and reduces total cycle interruptions. What advantage does the F57 chipbreaker offer when milling cast iron? The chipbreaker F57 creates controlled, short chips suited to cast iron, improving evacuation from the cutting zone and lowering the risk of re-cutting and tool damage when using the SNGX0904ZNN-F57 insert. Is the square 90° geometry suitable for heavy roughing? Yes, the square 90° geometry combined with a 0° negative rake offers mechanical strength and stability, making it appropriate for medium to heavy roughing operations on cast iron. Can the insert be indexed to multiple cutting edges? The insert is an indexable design with repeatable seating; users can rotate or index the insert to access fresh cutting edges and maintain consistent performance. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original factory-new product of the manufacturer.
SNGX0904ZNN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the high-process reliability and extended tool life provided by the Tiger‑tec Gold grade WKP35G; the combination of an optimised F57 chipbreaker and square 90° geometry delivers consistent chip control and surface quality in demanding milling operations. Order or request advice via Metav Werkzeuge for fast supply and application support. SNGX0904ZNN-F57 WKP35G – milling indexable insert by Walter Tools (Tiger‑tec Gold, for steel and cast iron) SNGX0904ZNN-F57 WKP35G is a square 90° milling insert designed for productive roughing and medium finishing in steel and cast iron applications SNGX0904ZNN-F57 WKP35G by Walter Tools Tiger-tec Gold coating for long tool life Square 90° form with negative 0° relief Optimised F57 chipbreaker for steel and cast iron Boosted productivity through engineered cutting performance The insert belongs to the Tiger‑tec Gold family and the WKP35G grade, optimised for machining steel and cast iron in accordance with ISO 513 group designations. The combination of a robust coated cemented carbide substrate and the specified F57 chipbreaker enables controlled chip formation and evacuation, which reduces interruptions and keeps cycle times stable. As a consequence, cycle predictability and component throughput improve, delivering measurable gains in shop-floor efficiency and overall productivity. Consistent surface quality with reliable chip control A square 90° geometry paired with a 0° negative relief produces a secure cutting edge that tolerates varied cutting conditions and offers low vibration during engagement. The F57 chipbreaker's geometry is calibrated to produce short, manageable chips in both short-chipping grey cast iron and the continuous-to-semi-continuous chips typical of many steels. The result is a reproducible surface finish and less downtime for chip-related clearing, which contributes directly to reduced rework and higher first-pass acceptance rates. Practical compatibility and economical application Marked with the designation for P / K material groups, the insert suits a broad range of unalloyed and alloyed steels and many cast iron grades, making it a flexible option for mixed-production environments. The insert's identifiers (form: square 90°, size code 09, thickness code 04) and tolerance class G facilitate straightforward tool selection and inventory management. For manufacturers seeking stable production and predictable tool life, this insert offers a balance of durability and machining versatility, helping to lower cost per part through extended service intervals. For production-critical milling tasks, specify the Walter Tools SNGX0904ZNN-F57 WKP35G insert and contact Metav Werkzeuge for tailored application advice and rapid delivery. Technical data SKU: SNGX0904ZNN-F57-WKP35G-WALTER Article designation: SNGX0904ZNN-F57 WKP35G Product type: Milling indexable insert Series: Tiger-tec Gold Facts Form: Square 90° Size code: 09 Thickness code: 04 Relief angle: 0° (negative) Chipbreaker: F57 Grade: WKP35G Material code: P / K Tolerance class: G Execution: X Special features Coating technology: Tiger‑tec Gold Optimised chip control for steel and cast iron Suited to ISO 513 material groups P and K Stable cutting edge for consistent surface quality Designed for productive roughing and medium finishing FAQ What materials is this insert suitable for? The SNGX0904ZNN-F57 WKP35G insert is formulated for steel and cast iron (ISO 513 groups P and K), offering reliable performance across common production grades. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes short, controllable chips in cast iron and improved chip control in steels, which reduces clearing interruptions and helps maintain a consistent surface finish. Is the insert intended for finishing or roughing? The combination of the square 90° geometry and WKP35G grade makes the insert suitable for productive roughing and medium finishing operations where a balance of material removal and surface quality is required. Can the insert be used on stainless or pre-hardened steels? This insert is specified for P and K material groups; stainless or pre‑hardened steels are not listed among the intended applications for this grade and should be verified against alternative grades if required. Walter Tools (Walter Deutschland GmbH), Derendinger Straße 53, 72072 Tübingen, Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com