SDMW120425-A57 WKK25G Wendeplatten - Walter Tools
High wear resistance and consistent chip control make this insert ideal for productive cast-iron machining; benefit from the Tiger‑tec Gold coating and the A57 chipbreaker together with a 2.5 mm corner radius for stable cutting performance. Order directly via Metav Werkzeuge or consult our specialists for application support. SDMW120425-A57 WKK25G – Indexable milling insert for cast iron, Tiger‑tec Gold (Walter Tools) The SDMW120425-A57 WKK25G is an indexable milling insert optimised for efficient machining of cast iron, combining a coated carbide grade with a square 90° geometry for robust face and profile milling. Tiger‑tec Gold coated carbide Optimised A57 chipbreaker Designed for cast iron (ISO group K) 2.5 mm corner radius, square 90° Stable performance for demanding cast-iron applications The combination of Tiger‑tec Gold coating and a coated carbide substrate delivers enhanced wear resistance and thermal stability during interrupted and continuous cuts in cast iron. The insert’s geometry — a square 90° profile with a 2.5 mm corner radius — reduces edge chipping while supporting consistent flank contact, which helps maintain dimensional stability over longer tool life. For production environments this translates into fewer tool changes and more predictable cycle times, supporting higher machine utilisation and lower unit costs. Controlled chip formation for uninterrupted machining An optimised A57 chipbreaker provides reliable chip control in brittle cast-iron materials, breaking short, fragmentary chips that are easy to evacuate. This reduces the risk of chip re-cutting and tool damage in shoulder and slot milling operations. The insert design, combined with a 15° clearance angle, improves entry behaviour and reduces transient loads during engagement, resulting in smoother passes and less vibration in demanding routines. Coating and grade engineered to extend tool life The coated carbide grade of the Tiger‑tec Gold series is tuned for abrasive wear typical of cast-iron machining. The coated carbide surface lowers adhesive build-up and improves resistance to abrasive constituents in iron alloys, while the coating architecture helps dissipate heat at the cutting edge. As a result, the insert sustains cutting parameters for longer periods, enabling higher productivity with consistent surface results and repeatable tool change intervals. Practical integration into milling systems The insert’s compact 12 mm seat size and 4 mm plate thickness make it compatible with common indexable milling cutter bodies that accept SDMW‑type inserts. The square form allows four indexable edges per insert, supporting cost-effective tool utilisation. The SDMW120425-A57 WKK25G is suitable for both roughing passes where stability and edge life are crucial and for semi-finish passes where chip control is important; selecting appropriate cutting data ensures the expected balance between material removal rate and edge life. For efficient cast-iron milling using Walter Tools' Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMW120425-A57-WKK25G-WALTER SKU: SDMW120425-A57-WKK25G-WALTER Designation: SDMW120425-A57 WKK25G Manufacturer: Walter Tools Facts Insert size: 12 mm Corner radius: 2.5 mm Clearance angle: 15° Thickness: 4 mm Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKK25G (coated carbide) Chipbreaker: A57 Shape: Square 90° Material application: Cast iron (ISO group K) Execution: W FAQ Which materials is this insert suitable for? The SDMW120425-A57 WKK25G is specifically designed for cast iron (ISO group K) applications; the WKK25G grade is tuned to resist abrasive wear typical of these materials. What chip control can be expected with the A57 chipbreaker? The A57 chipbreaker delivers short, controllable chips in brittle materials, supporting safe evacuation and reduced re-cutting during face and slot milling. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating enhances thermal stability and wear resistance on the cutting edge, extending the effective tool life of the insert under typical cast‑iron cutting conditions. Is the insert compatible with common SDMW cutter bodies? Yes, the SDMW120425-A57 form factor and 12 mm seat size are compatible with standard cutter bodies designed for SDMW inserts, allowing four indexed cutting edges per insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (trading as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.
SDMW120425-A57 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold performance and the WKP35G grade for productive milling of steel and cast iron; the combination of robust coated carbide and a defined geometry ensures stable chip formation and long tool life – order or consult Metav Werkzeuge for selection support. SDMW120425-A57 WKP35G milling indexable insert — Walter Tools (Tiger‑tec Gold, 15° clearance, 2.5 mm radius) The SDMW120425-A57 WKP35G is a square 90° milling indexable insert designed for productive machining of steel and cast iron, delivering consistent performance in industrial milling applications. Tiger‑tec Gold coating technology WKP35G: coated carbide grade 15° clearance angle, stable cutting edge 2.5 mm corner radius for predictable strength High process reliability for steel and cast iron milling The Tiger‑tec Gold series and the WKP35G grade provide a combination of wear resistance and thermal stability that is particularly suited to ISO groups P (steel) and K (cast iron). The coated carbide construction reduces flank wear and supports stable chip formation even under higher cutting forces. For machining operations where repeatable surface quality and consistent cycle times matter, this insert helps to reduce unplanned tool changes and maintain throughput. The description of the coating reflects a multilayer technology engineered to withstand the specific demands of ferrous materials, which translates directly into fewer tool interruptions and improved process efficiency. Geometry engineered for predictable tool life and accuracy A defined clearance and edge geometry make a tangible difference in everyday milling. The insert’s 15° clearance angle and 2.5 mm corner radius, combined with the square 90° form, deliver a robust cutting edge with predictable strength in radial engagements and shoulder milling. The M tolerance class ensures interchangeability and repeatable seating in toolholders. These geometric choices reduce the risk of premature chipping during interrupted cuts and support consistent dimensional results across batches, which is essential for medium- to high-volume production environments. Chip control and productivity in machining strategies The integrated A57 chipbreaker is optimised for the typical chip forms encountered in steel and cast iron machining. Efficient chip control reduces cutter re-cutting and minimises the need for machine stoppages to clear swarf, increasing process uptime. As a result, cycle times can be shortened through more aggressive parameters where the machine and workpiece allow it, while still maintaining surface integrity. Where process reliability is a priority, this insert’s combination of grade and chipbreaker contributes directly to higher material removal rates and stable cutting forces. Compatibility and practical benefits in the workshop Designed as an SDMW-style insert, this format integrates with a wide range of milling cutters engineered for square inserts, enabling straightforward replacement and indexing. The coated carbide grade and series designation indicate suitability for a broad range of catalogued geometries and applications, easing tool planning across mixed production tasks. Economically, the improved tool life and reduced downtime support predictable tooling costs and simpler inventory management. For customers seeking to harmonise tooling across operations, the insert is a practical choice that balances robustness and productivity. For tailored toolholder matching and immediate availability of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for expert advice and delivery coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SDMW120425-A57-WKP35G-WALTER Designation: SDMW120425-A57 WKP35G Product type: milling indexable insert Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Numbers / Facts Clearance angle: 15° Corner radius: 2.5 mm Plate size: 12 Tolerance class: M Plate thickness: 04 Special features / Versions Coating: Tiger‑tec Gold technology Material: P / K (steel and cast iron applications) Chipbreaker: A57 Plate shape: square 90° Execution: W Base designation: SDMW120425-A57 FAQ What materials is this insert intended for? The SDMW120425-A57 WKP35G insert is specified for steel and cast iron applications according to ISO group P and K; the WKP35G grade and Tiger‑tec Gold coating are tuned for these materials. How does the A57 chipbreaker affect machining? The A57 chipbreaker promotes controlled chip forms for ferrous materials, reducing re-cutting and improving swarf evacuation, which supports longer uninterrupted runs. What is the significance of the 2.5 mm corner radius? A 2.5 mm corner radius increases the mechanical strength of the cutting edge for shoulder and heavy radial cuts, offering a compromise between edge durability and achievable corner detail. Is this insert compatible with standard SDMW toolholders? The insert follows the SDMW designation and is compatible with corresponding toolholders designed for square 90° SDMW inserts; correct seating and torque should be observed. What benefits does the Tiger‑tec Gold series deliver? Tiger‑tec Gold coating provides enhanced wear resistance and thermal stability, which translates into improved tool life, reliable surface finish and consistent performance under varying cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMW120425-A57 WSP45G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coating combined with the WSP45G grade to achieve productive, reliable milling across steel, stainless steel and high-temperature alloys; the square 90° geometry with a 2.5 mm corner radius provides predictable edge life and consistent part quality. Order the SDMW120425-A57 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. SDMW120425-A57 WSP45G – Square milling insert, Tiger·tec Gold, Walter Tools A SDMW120425-A57 WSP45G is a square milling indexable insert engineered for versatile face and slot milling applications in steel, stainless steel and heat-resistant alloys, delivering stable chip control and consistent surface finish. Tiger·tec Gold coated carbide grade WSP45G Suited for steel, stainless steel and superalloys 15° relief angle for improved edge stability Square 90° geometry, 2.5 mm corner radius Maximise throughput with a tough PVD-coated grade The combination of the Tiger·tec Gold coating and the WSP45G carbide composition is designed for high process security and long tool life when machining challenging materials. The PVD-based coating improves wear resistance and supports stable cutting-edge performance under variable cutting temperatures, making it suitable for mixed-batch production where predictability matters. For shops aiming to reduce downtime, this insert reduces frequency of tool changes and contributes to a more continuous production flow, while the coatings also aid in consistent surface quality on each workpiece. Predictable part quality through robust geometry and edge support A square 90° configuration with a 2.5 mm corner radius and a 15° relief angle delivers a balance between strength and finish capability: the larger radius reduces notch wear and improves tool life in interrupted cuts, while the relief angle supports stable shear conditions. The design leads to fewer rejects and less rework, which benefits both batch production and smaller lot sizes. The insert’s tolerance class M ensures reproducible seating and repeatable positioning in compatible toolholders, enabling consistent results across tool assemblies. Practical application and integration for workshop use The SDMW120425-A57 WSP45G features the A57 chipbreaker, tuned for controlled chip formation in finishing and medium-duty roughing passes. Marked by the series Tiger-tec Gold and the execution code W, the insert integrates into common square-insert milling holders and is available in the size code 12 with thickness code 04. For process setup, recommend referencing toolholder supplier data and validating cutting parameters on a trial component; specific cutting data is available on request. The manufacturer’s reputation for steady performance supports confidence in repeated use and easy integration into existing machining strategies. For application-specific cutting data or to order SDMW120425-A57 WSP45G from Walter Tools, contact Metav Werkzeuge for personalised advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMW120425-A57-WSP45G-WALTER Article designation: SDMW120425-A57 Label: Fräswendeschneidplatte SDMW120425-A57 WSP45G Walter Tools Product type: Fräswendeschneidplatte Facts Plate size: 12 Corner radius: 2.5 mm Relief angle: 15° Thickness code: 04 Tolerance class: M Special features Grade: WSP45G Coating technology: Tiger·tec Gold Material groups: P / M / S Chipbreaker: A57 Shape: Square 90° Execution: W Series: Tiger-tec Gold FAQ Which workpiece materials are covered by this insert? The SDMW120425-A57 WSP45G is specified for machining materials in groups P / M / S, meaning steel (P), stainless steel (M) and heat-resistant superalloys or titanium (S), offering a versatile solution across these classes. What role does the Tiger·tec Gold coating play? The Tiger·tec Gold coating on the WSP45G grade increases wear resistance and thermal stability, improving the insert’s life and sustaining consistent surface finish during extended production runs. How does the A57 chipbreaker affect machining? The A57 chipbreaker is designed to produce controlled chip formation for face and slot milling operations, reducing chip-related interruptions and supporting stable cutting conditions. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMW1204AZN-A57 WKP25S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WKP25S grade and the A57 chipbreaker provides robust wear resistance and stable chip control for productive machining of steel and cast iron; order the insert via Metav Werkzeuge or consult their specialists for application-specific advice. SDMW1204AZN-A57 WKP25S – Indexable milling insert, Tiger‑tec Silver, square 90° (Walter Tools) The SDMW1204AZN-A57 WKP25S is an indexable milling insert engineered for productive chip formation and high process stability when machining steel and cast iron in general milling operations. Tiger‑tec Silver coating WKP25S grade for steel and cast iron Square 90° insert form Chipbreaker A57 for controlled chips Consistent, productive performance on steel and cast iron The combination of the Tiger‑tec Silver coating and the WKP25S carbide grade ensures consistent cutting performance under the thermal and mechanical demands of machining steel (P) and cast iron (K). The coating reduces abrasive wear and helps maintain a stable cutting edge, while the grade is tuned for the typical heat generation and chip behaviour encountered in these material groups. This results in longer tool life and fewer insert changes, supporting uninterrupted production cycles. Reliable tool life through coated carbide technology A coated carbide substrate offers a balance between toughness and hardness: the substrate absorbs shock while the coating resists abrasive wear. The coated carbide construction of this insert improves edge retention in mixed-production environments and reduces the frequency of regrinds. The A57 chipbreaker contributes to repeatable, short chips that are easier to evacuate, which in turn lowers the risk of built-up edge and surface damage on the workpiece. Machine-friendly geometry for efficient milling and secure seating The square 90° geometry with a 15° relief angle provides a robust cutting edge and flexibility for different milling strategies, including face milling and shoulder cuts where a strong corner is required. The designation reflects a standard form that fits common toolholders for solid and modular milling cutters. The tolerance class M supports consistent seating and repeatable positioning, reducing setup time and increasing process reliability. For application-specific recommendations or to order genuine Walter Tools SDMW1204AZN-A57 WKP25S inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMW1204AZN-A57-WKP25S-WALTER Article: Fräswendeschneidplatte SDMW1204AZN-A57 WKP25S Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger‑tec Silver Grade: WKP25S Core specifications ISO designation: SDMW1204AZN-A57 WKP25S Relief angle: 15° Insert form: Square 90° Insert size: 12 Thickness: 04 Tolerance class: M Chipbreaker: A57 Materials and features Coating: Tiger‑tec Silver Substrate: coated carbide Applicable materials: Steel (P), Cast iron (K) Execution: W FAQ What materials is this insert suitable for? The SDMW1204AZN-A57 WKP25S insert is specified for steel (P) and cast iron (K) applications and is engineered to manage the typical chip and wear behaviour of those groups. What does the A57 chipbreaker do? The A57 chipbreaker shapes chip formation to produce short, controlled chips; on the SDMW1204AZN-A57 WKP25S this supports safer evacuation and more consistent surface finishes during milling. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the insert reduces abrasive wear and improves heat resistance, which helps to extend edge life and maintain process stability in mixed production environments. Is this insert compatible with standard toolholders for square inserts? Yes, the square 90° form of the SDMW1204AZN-A57 WKP25S matches common milling cutter pockets for square inserts; tolerance class M supports repeatable seating. What is the significance of the WKP25S grade? The WKP25S grade denotes a coated carbide formulation optimised by Walter Tools for productivity and reliable performance when machining steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; info@walter-tools.com Trademarks and brand names are the property of their respective owners. Brand names and protected designations are mentioned solely for clarification and comparison. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SDMW1204AZN-A57 WKP35G Wendeplatten - Walter Tools
Benefit from a durable, high-performance cutting solution that combines Tiger·tec Gold surface technology with the WKP35G grade for stable chip formation and extended tool life; the robust A57 chipbreaker and 15° relief support efficient machining of steel and cast iron — order or ask Metav Werkzeuge for application support. SDMW1204AZN-A57 WKP35G — Walter Tools milling indexable insert, 15° relief, square 90° SDMW1204AZN-A57 WKP35G is a square 90° milling indexable insert with a 15° clearance angle, designed for productive machining of steel (P) and cast iron (K) Tiger·tec Gold coating for high wear resistance Suitable for steel (P) and cast iron (K) Square 90° geometry with 15° clearance Grade WKP35G for stable chip formation Consistent productivity through advanced coating and grade The combination of Tiger·tec Gold surface technology and the WKP35G cutting grade delivers predictable tool life and stable edge behaviour in demanding milling operations. The coated carbide substrate is engineered for abrasion resistance and thermal stability, which reduces flank wear and maintains cutting performance over longer cycles. The integrated A57 chipbreaker promotes controlled chip formation when machining steel and cast iron, resulting in fewer interruptions for chip clearing and a more continuous production flow. These characteristics translate into measurable efficiency gains on high-volume or mixed-production shop floors. Precision geometry for secure seating and repeatable results The square 90° insert geometry combined with a 15° free angle and tolerance class M ensures secure clamping and repeatable positioning in standard toolholders. The form factor gives a robust cutting edge for shoulder milling and square-corner operations, while the tolerance class supports interchangeability across compatible tool systems. For process engineers and production planners, this means reliable dimensional accuracy and consistent surface quality from one insert change to the next, lowering rework rates and improving first-pass yield. Practical benefits: chip control, versatility and ease of integration With a dedicated A57 chipbreaker and a thickness/size configured for common milling applications, the insert simplifies set-up and reduces the need for extensive process tuning. The grade’s adaptation to ISO groups P and K is explained by its balance between toughness and wear resistance: it copes well with the heat and continuous chips typical of steel, while resisting the abrasive tendencies of cast iron. For workshops seeking a single, versatile grade to cover a wide material range, this solution reduces tool inventory complexity without compromising performance. Speak to Metav Werkzeuge for tailored application advice and to secure the Walter Tools Tiger·tec Gold WKP35G insert for dependable, high-process reliability Technical data Article number: SDMW1204AZN-A57-WKP35G-WALTER Dimensions / Core data Insert size: 12 Thickness: 04 Free angle: 15° Geometry: Square 90° Tolerance class: M Special features / Versions Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: A57 Application: Steel (P) and cast iron (K) Execution: W FAQ What materials is this insert suitable for? This insert is specified for machining steel (ISO group P) and cast iron (ISO group K); the WKP35G grade is tuned for the thermal and abrasive demands of these materials. How does the A57 chipbreaker affect milling performance? The A57 chipbreaker controls chip form and evacuation, reducing build-up and promoting uninterrupted cutting when the WKP35G grade is used in milling operations. Is the insert compatible with standard SDMW toolholders? Yes — the geometry corresponds to common SDMW dimensions and the tolerance class M supports reliable seating in compatible toolholder systems. What are the benefits of the Tiger·tec Gold series here? The Tiger·tec Gold surface technology enhances wear resistance and thermal stability, giving longer tool life and consistent cutting behaviour under heavy or mixed-production loads. Where can further technical advice be obtained? Metav Werkzeuge can provide specific application parameters and holder compatibility information for the SDMW1204AZN-A57 WKP35G insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original and brand-new from the manufacturer.
SDMW1204AZN-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, precise chip control and broad material coverage to keep production running efficiently; order directly via Metav Werkzeuge or consult their specialists for application support. SDMW1204AZN-A57 WKP35S — milling indexable insert (Tiger·tec Silver, for steel & cast iron) by Walter Tools The SDMW1204AZN-A57 WKP35S is a square 90° milling indexable insert with 15° clearance, designed for productive face and shoulder milling in steel and cast iron applications Tiger·tec Silver coating for increased tool life WKP35S coated carbide grade for steel and cast iron Square 90° insert, 12 mm size, 15° clearance A57 chipbreaker for controlled chip formation Boosted productivity through coating technology and grade selection The combination of the Tiger·tec Silver coating and the WKP35S coated carbide grade delivers a measurable increase in process stability and tool life. This thermal and tribological coating reduces flank wear and maintains a stable cutting edge under moderate to heavy cutting conditions, which means fewer tool changes and higher machine uptime. For production planners and process engineers, the result is a lower cost per part and more predictable batch throughput when machining unalloyed and alloyed steel as well as cast iron. Predictable chip control and geometry for safer milling A geometry with a 15° clearance and the A57 chipbreaker creates consistent chip formation and evacuation, reducing the risk of built-up edge and interrupted cuts. The square 90° format provides robust cutting margins and versatile orientation for face and shoulder milling, while the insert’s precise tolerance class M ensures repeatable seating in the cutter body. This stability translates into improved surface finish and reduced rework, important for manufacturing environments that prioritise consistent part quality over long production runs. Clear material suitability and practical application notes The insert is specified for ISO material classes P and K, making it suitable for a wide range of steel and cast iron machining tasks. The coated carbide composition is optimised for the thermal loads and abrasive wear typical of these materials, so operators can expect reliable performance in roughing and semi-finishing operations. When selecting cutting parameters, favour the manufacturer’s recommended speeds and feeds for the Tiger·tec Silver family to balance productivity and tool life; for difficult interrupted cuts, the robust chip control helps maintain process security. For application advice on the Walter Tools SDMW1204AZN-A57 WKP35S or to confirm suitability for a specific machining task, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SDMW1204AZN-A57-WKP35S-WALTER Label: Fräswendeschneidplatte SDMW1204AZN-A57 WKP35S Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger-tec Silver Grade: WKP35S Execution: W Facts Insert size: 12 Clearance angle: 15° Plate form: Square 90° Chipbreaker: A57 Thickness: 04 Tolerance class: M Material groups: P / K Special features Coating: Tiger·tec Silver Material: coated carbide Applications: Steel (P), Cast iron (K) Series description: WKP35S is a Walter carbide grade optimised for steel and cast iron Design: Square indexable insert, robust cutting edge FAQ What materials is this insert suitable for? The SDMW1204AZN-A57 WKP35S is specified for ISO groups P and K, so it is suitable for machining steel and cast iron. Which coating technology does the insert use? The insert features the Tiger·tec Silver coating, which improves thermal resistance and flank wear behaviour for coated carbide grades. What chip control does the geometry provide? The A57 chipbreaker is designed for controlled chip formation and evacuation, supporting safer roughing and semi-finishing operations. Can the insert be used for finishing cuts? While optimised for roughing and semi-finishing, the stable edge and controlled chip formation can deliver acceptable surface quality in many finishing applications depending on parameter choice. Is the tolerance sufficient for repeatable clamping? Yes, the tolerance class M ensures repeatable seating in compatible cutter bodies for consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original and brand-new from the manufacturer.
SDMX0904ZDR-E27 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold WKP35G coating and E27 chipbreaker for consistent chip control and long tool life; combined with the 15° relief and square 90° geometry, this insert delivers dependable milling performance in steel and cast iron. Order or request application advice from Metav Werkzeuge for seamless integration into production. SDMX0904ZDR-E27 WKP35G milling insert – Walter Tools, Tiger·tec Gold coated carbide, for steel and cast iron The SDMX0904ZDR-E27 WKP35G is a square 90° indexable milling insert designed for productive machining of steel (P) and cast iron (K), delivering stable chip formation and reliable cutting performance in general milling applications. Tiger·tec Gold coated carbide grade WKP35G Square 90° insert, size 09, thickness 04 15° relief angle with E27 chipbreaker Optimised for steel (P) and cast iron (K) Improved process stability through coating and geometry The combination of Tiger·tec Gold coating and the WKP35G carbide grade provides enhanced wear resistance and thermal stability during milling. This coated carbide is engineered to withstand the typical heat and abrasion encountered when machining steel and cast iron, which helps maintain a stable cutting edge over longer tool life. The E27 chipbreaker actively controls chip formation, reducing re-cutting and the risk of built-up edge; this in turn supports consistent surface finish and fewer interruptions in automated or manual milling operations. For shops seeking to increase uptime, the engineered coating and chip control translate directly into measurable improvements in process reliability. Precision cutting with defined geometry for predictable results The insert’s square 90° form and 15° relief deliver a predictable cutting engagement and robust corner strength, making it well suited to a range of slotting and shoulder milling tasks. The size designation 09 and plate thickness 04 correspond to established ISO dimensions, permitting straightforward toolholder choice and inventory management. Because the geometry balances strength and accessibility, the indexable plate offers a pragmatic compromise between aggressive material removal and control of cutting forces, which is particularly valuable when working across mixed batches of steel and cast iron components. Practical benefits: productivity and clean chips Adopting this insert supports a more productive machining sequence by offering reliable chip evacuation and reduced tooling changes. The E27 chipbreaker is tailored to break chips into manageable segments during interrupted or continuous cuts, improving machine safety and decreasing cycle interruptions. The coated carbide substrate resists abrasive wear from cast iron while remaining resilient against the thermal loads typical of steel milling, enabling shops to maintain consistent cycle times and surface quality. For engineers and production planners, these characteristics contribute to a clearer cost-per-component calculation and fewer variables to manage on the shop floor. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts or to discuss toolholder compatibility: eMail info@metav-werkzeuge.com | Tel +49 2822 7131930 Technical Data SKU: SDMX0904ZDR-E27-WKP35G-WALTER Designation: SDMX0904ZDR-E27 WKP35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Facts Relief angle: 15° Insert form: Square 90° Size: 09 Thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: E27 Execution: X Applicable materials: Steel (P), Cast iron (K) FAQ What materials is this insert suitable for? The SDMX0904ZDR-E27 WKP35G is optimised for steel (P) and cast iron (K) applications, reflecting the design intent of the Tiger·tec Gold WKP35G grade. How does the E27 chipbreaker affect machining? The E27 chipbreaker promotes segmented chip formation and safer evacuation during milling; this reduces the chance of re-cutting and supports consistent surface finish with the WKP35G-coated insert. Which toolholders are compatible with a square 90° insert of size 09? Standard indexable milling cutters designed for square 09 inserts and 90° geometry will accept this plate; ensure the holder matches the SDMX0904ZDR-E27 designation and clamping style. Is the coating suitable for high-temperature cutting conditions? The Tiger·tec Gold coating enhances thermal resistance and wear performance, making the insert appropriate for the heat and abrasion typical when machining both steel and cast iron. Can this insert be used for shoulder milling and slotting? Yes, the robust corner strength of the square 90° geometry and the 15° relief make it well suited to shoulder milling and moderate slotting operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
SDMX0904ZDR-E27 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of Walter Tools' Tiger·tec Gold grade and the WSM35G cutting material to secure stable chip formation and long tool life when machining stainless steels and heat‑resistant alloys; benefit from the square 90° geometry and E27 chipbreaker for versatile milling tasks. Order via Metav Werkzeuge or consult their specialists for application‑specific recommendations. SDMX0904ZDR-E27 WSM35G milling indexable insert – Tiger·tec Gold for stainless steel and superalloys (Walter Tools) The SDMX0904ZDR-E27 WSM35G is a square 90° milling indexable insert engineered for productive machining of stainless steel and heat‑resistant superalloys in demanding production environments. Tiger·tec Gold coating for wear resistance Suitable for stainless steel and superalloys Square 90° geometry for versatile milling Stable chip control with E27 chipbreaker Outstanding wear resistance for demanding materials The Tiger·tec Gold series, combined with the WSM35G grade, delivers a coating and substrate pairing that is optimised for materials that generate heat and tend to work‑harden. The specialised surface treatment increases wear resistance and supports a stable cutting edge, which reduces flank wear and the frequency of index changes. This results in a measurable improvement in uptime and contributes to a lower cost per manufactured part when processing stainless steel and similar alloys. Geometry and chip control that enhance process reliability The square 90° form and the E27 chipbreaker provide a predictable cutting behaviour and consistent chip formation in interrupted and continuous milling. The insert’s 15° relief angle and nominal dimensions ensure secure seating in standard holders and offer reproducible cutting forces. For production planning, this geometric stability translates into improved surface finish consistency and reduced risk of built‑up edge, thereby enhancing overall process reliability. Economic performance through longer tool life and fewer interruptions Selecting a grade optimised for heat‑resistant materials reduces unplanned tool changes. The combination of a robust substrate and Tiger·tec Gold coating yields longer tool life and fewer tool‑related downtime events. Fewer stoppages and predictable index intervals help to increase machine availability and support higher net output; in many setups this leads to a rapid return on investment compared with generic uncoated inserts. Practical application notes and material compatibility This insert is specified for ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), making it appropriate for demanding aerospace, medical and energy sector components where thermal load and material toughness are key factors. When selecting cutting data, favour moderate cutting speeds and ensure appropriate coolant or lubrication strategies for best edge stability. The SDMX0904ZDR‑E27 geometry makes it suitable for a range of slotting, face milling and shoulder milling operations in robust milling systems. Contact Metav Werkzeuge for personalised process advice and to source Walter Tools Tiger·tec Gold inserts; reach the Metav team at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: SDMX0904ZDR-E27-WSM35G-WALTER Designation: SDMX0904ZDR-E27 WSM35G Series: Tiger·tec Gold Grade: WSM35G Core measurements Geometry: Square 90° Size: 09 Thickness: 04 Relief angle: 15° Chipbreaker: E27 Tolerance class: M Design and special features Material groups: S / M (ISO) Coating technology: Tiger·tec Gold Execution / version: X Applicable for stainless steel and heat‑resistant superalloys FAQ What materials is this insert intended for? The SDMX0904ZDR‑E27 WSM35G insert is tailored for ISO groups M and S, meaning it is suitable for stainless steel and heat‑resistant superalloys/titanium applications. How does the Tiger·tec Gold series benefit production? Tiger·tec Gold coating on the SDMX0904ZDR‑E27 improves wear resistance and edge stability, which helps to extend index life and increase machine uptime in production environments. Which chipbreaker is fitted and why does it matter? This insert uses the E27 chipbreaker, designed to produce stable chips and reduce the risk of entanglement or edge build‑up during milling, improving surface quality and process repeatability. Is the square 90° geometry suitable for face and shoulder milling? Yes, the square 90° form offers versatility for face, shoulder and some slotting operations, providing a robust cutting edge for moderate to heavy engagement. What should be considered when selecting cutting data? For the SDMX0904ZDR‑E27 grade, choose conservative cutting speeds and ensure appropriate cooling or lubrication to manage heat and support stable chip formation. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is a brand of the Walter AG group and is mentioned here for product identification. Protected trademarks and product names are the property of their respective owners. There is no connection between our company and the named manufacturers beyond the sale of original, factory‑new goods.
SDMX0904ZDR-E27 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear resistance and the E27 chipbreaker geometry for stable chip control and longer tool life; the combination of high process security and versatile material suitability supports uninterrupted milling cycles. Order the SDMX0904ZDR-E27 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. SDMX0904ZDR-E27 WSP45G — Milling insert, Tiger·tec Gold, 15° clearance (Walter Tools) SDMX0904ZDR-E27 WSP45G is a versatile milling insert designed for demanding milling tasks across a wide range of materials Tiger·tec Gold PVD-coated carbide grade WSP45G Suitable for Stahl, rostfreier Stahl and heat‑resistant alloys Square 90° insert with 15° clearance angle E27 chipbreaker for predictable chip control High‑performance grade that reduces downtime The WSP45G grade, realised in the Tiger·tec Gold coating system, delivers a combination of wear resistance and edge stability that directly benefits productivity. As a PVD‑coated carbide grade, it offers improved resistance to abrasive wear and thermal loading compared with uncoated grades; this means fewer insert changes and longer uninterrupted machining periods. The coating and substrate pairing is designed to maintain a stable cutting edge under the heat and stresses typical of modern milling operations, resulting in consistent component quality and lower process interruptions. Geometry engineered for reliable surface quality and repeatability The square 90° form combined with a 15° clearance angle provides sturdy cutting support and good engagement for general‑purpose milling operations. The E27 chipbreaker promotes regular chip formation, reducing the risk of built‑up edge and improving surface finish on the workpiece. With tolerance class M and a plate thickness consistent with the 04 designation, the insert ensures repeatable seating in the cutter pocket and predictable cutting behaviour—factors that simplify tool set‑up and improve repeatability across production runs. Broad material capability for fewer tool changes Designed for the ISO groups P, M and S, the insert is suited to machining common Stahl grades, rostfreier Stahl and heat‑resistant superalloys and Titan. For Stahl the grade balances toughness and wear resistance to cope with typical heat and chip formation. For rostfreier Stahl the tougher edge chemistry and coating assist in avoiding edge build‑up; for high‑temperature alloys the grade retains edge strength to resist flank wear. The result is a single indexable geometry that covers many shop requirements and reduces inventory complexity. Practical benefits for the workshop and process planners Adopting this insert supports stable chip formation, predictable tool life and consistent surface quality—advantages that translate into lower cycle times and improved throughput. The standardised 09 size and square format integrate easily with many milling cutter bodies, supporting quick replacement and minimal downtime. Backed by Walter Tools’s reputation for process security, the insert is a pragmatic choice where a balance of economy and performance is required, especially in mixed‑material production environments where flexibility matters. For machining operations that require a dependable, PVD‑coated milling solution from Walter Tools, contact Metav Werkzeuge for application advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SDMX0904ZDR-E27-WSP45G-WALTER Designation: SDMX0904ZDR-E27 WSP45G Type: Milling insert Brand: Walter Tools Series: Tiger·tec Gold Key specifications Clearance angle: 15° Insert shape: Square 90° Size: 09 Thickness: 04 Chipbreaker: E27 Tolerance class: M Features & materials Grade: WSP45G (PVD-coated carbide) Material suitability: P / M / S — Stahl, rostfreier Stahl, heat‑resistant superalloys and Titan Execution: X Application focus: versatile milling applications FAQ What materials can this insert machine effectively? The SDMX0904ZDR-E27 WSP45G insert by Walter Tools is formulated for ISO groups P, M and S, meaning it is effective on Stahl, rostfreier Stahl and heat‑resistant alloys including Titan. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold strengthens the PVD coating system on the WSP45G grade, providing improved wear resistance and thermal stability that extends insert life under continuous milling. Which chip control behaviour does the E27 chipbreaker provide? The E27 chipbreaker on the SDMX0904ZDR-E27 encourages regular chip segmentation, reducing the likelihood of long, tangled chips and improving surface finish consistency. Is the insert suitable for finishing or roughing? With its square 90° geometry and robust grade, the insert suits general‑purpose milling; depending on cutting parameters it can be used for both productive roughing and consistent finishing passes. What are the key geometric details to check when ordering? Confirm the SDMX0904ZDR-E27 WSP45G SKU to match the square 90° form, 15° clearance angle, size 09 and thickness 04 to ensure compatibility with the intended cutter body. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation. The offered item is original, factory‑new merchandise from the manufacturer Walter Tools.
SDMX0904ZDR-E57 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the WKP35G coated carbide to increase process reliability and tool life while machining steel and cast iron; order the SDMX0904ZDR-E57 WKP35G directly via Metav Werkzeuge or ask the consultants for application support. SDMX0904ZDR-E57 WKP35G – Milling indexable insert, 15° relief, Square 90° (Walter Tools) A SDMX0904ZDR-E57 WKP35G is a coated carbide milling insert designed for productive machining of steel and cast iron in industrial milling applications. Tiger·tec Gold coated carbide grade WKP35G Application-optimised for steel (P) and cast iron (K) Square 90° shape, 15° relief angle Chipbreaker E57 for controlled chip formation Consistent productivity through a high-performance grade The WKP35G grade, realised in the Tiger·tec Gold coating system, is engineered for stable wear behaviour and repeatable performance. As a coated carbide, the insert combines a wear-resistant surface with a tough substrate so that cutting edges maintain integrity over extended runs. This leads to fewer tool changes and improved uptime; the measurable result is a more predictable production rhythm under varying heat and load conditions. The ISO-based designation emphasises suitability for the P and K material groups, providing clarity for machining strategies. Predictable chip control and surface quality from optimised geometry The square 90° form with a 15° relief angle and the E57 chipbreaker deliver controlled chip formation and reliable evacuation in interrupted and continuous cuts. The chipbreaker geometry is designed to split and curl swarf into manageable segments, reducing the risk of entanglement and enhancing surface finish. In practical terms, this means shorter cycle times and more consistent component quality when compared with unoptimised geometries; process parameters can be set with greater confidence thanks to the insert’s repeatable behaviour. Versatility and process security for steel and cast iron Designed for the machining of steel (P) and cast iron (K), the insert supports a broad range of applications where abrasive wear and variable chip breaking are common. The tolerance class M and the compact designation 09 indicate dimensional consistency and interchangeability in toolholders, supporting quick index changes and reducing set-up overhead. The combined effect of the grade, coating and chipbreaker is a robust, application-oriented solution that balances productivity with predictable tool life, making it suitable for batch production as well as series machining. For machining tasks requiring high process security and proven Walter Tools technology, contact Metav Werkzeuge for technical guidance and availability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SDMX0904ZDR-E57-WKP35G-WALTER Label: Fräswendeschneidplatte SDMX0904ZDR-E57 WKP35G Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Grade: WKP35G Facts Relief angle: 15° Shape: Square 90° Size designation: 09 Thickness designation: 04 Tolerance class: M Special features Chipbreaker: E57 Material suitability: Steel (P), Cast iron (K) Coated carbide insert (Tiger·tec Gold) Execution: X ISO designation: SDMX0904ZDR-E57 WKP35G FAQ What materials is this insert intended for? The SDMX0904ZDR-E57 WKP35G is intended primarily for steel (P) and cast iron (K) machining, reflecting the WKP35G grade and Tiger·tec Gold coating suitability. How does the E57 chipbreaker affect machining? The E57 chipbreaker segments and controls chips to improve evacuation and surface finish, which reduces rework and promotes stable cutting conditions with the Walter Tools insert. Which geometry advantages does the square 90° form provide? The square 90° shape offers robust cutting corners for slotting and shoulder milling, while the 15° relief angle balances cutting strength with clearance to reduce rubbing. Is this insert dimensionally consistent for quick index changes? Yes, the tolerance class M and size designation 09 ensure repeatable fitting and allow efficient index changes in standard toolholders. Can this grade be used for series production? The Tiger·tec Gold WKP35G grade is designed for process stability and long tool life, making it suitable for series production where consistent results are required. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
SDMX0904ZDR-E57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the WSM35G grade and Tiger·tec Gold coating for reliable cutting-edge stability and long tool life when machining stainless steel and high-temperature alloys; benefit from the optimised E57 chipbreaker and square 90° geometry for consistent chip formation and predictable indexing. Order the inserts directly via Metav Werkzeuge or consult the team for application-specific recommendations. SDMX0904ZDR-E57 WSM35G — milling indexable insert by Walter Tools, Tiger·tec Gold, square 90° The SDMX0904ZDR-E57 WSM35G is a square milling indexable insert engineered for demanding applications in stainless steel and heat-resistant superalloys, offering a 15° relief angle and an optimised E57 chipbreaker to support secure chip control and extended tool life. Tiger·tec Gold coated grade WSM35G Optimised E57 chipbreaker for stable chips Square 90° geometry for secure clamping Suited for stainless steel and superalloys High-performance grade for difficult-to-machine alloys The Tiger·tec Gold WSM35G grade is formulated to deliver stable cutting performance when machining stainless steel and heat-resistant superalloys. The combination of a hard, wear-resistant coating with a substrate tuned for toughness reduces edge wear and lowers the risk of built-up edge formation. This results in more predictable tool life and fewer unscheduled insert changes, supporting a smoother production flow and improved process reliability. The E57 chipbreaker assists in producing short, controlled chips under typical milling conditions. Design that supports process security and indexation A square 90° insert geometry provides robust corner strength and simple indexation for multi-edge use, while the 15° relief angle reduces rubbing and thermal loading at the cutting zone. The insert’s tolerance class M ensures consistent dimensions for repeatable clamping and predictable part tolerances. Together, these design choices promote stable cutting forces and repeatable surface finishes on machined components, helping operations maintain high throughput with reduced scrap rates. Practical benefits: tool life and machining economy The coated carbide grade and chipbreaker design deliver tangible economic advantages: extended edge life in tough materials and improved chip evacuation that reduces cycle interruptions. In practical terms, this can lower tooling costs per component and shorten downtime for insert changes. When combined with suitable cutter bodies, the insert supports higher machining parameters while preserving surface quality, making it an efficient choice for serial production and job-shop environments where stainless steel or superalloy workpieces are common. Application guidance and integration into existing tooling The insert is supplied in the SDMX0904ZDR-E57 format, compatible with cutter holders designed for square 90° indexable inserts and E57 chipbreaker geometries. For machining strategies, moderate feed rates with attention to entry and exit conditions are recommended to control edge loading; coolant and appropriate speeds should be selected according to the workpiece alloy and machine capability. The insert’s balanced combination of toughness and wear resistance makes it suitable for both ramping and peripheral milling operations in demanding material classes. For application advice or to place an order for Walter Tools inserts in the SDMX0904ZDR-E57 WSM35G specification, contact Metav Werkzeuge for tailored recommendations and fast delivery options Technical data Article number: SDMX0904ZDR-E57-WSM35G-WALTER Product type: Milling indexable insert Grade: WSM35G Series: Tiger·tec Gold Chipbreaker: E57 Facts Free angle: 15° Insert shape: Square 90° Size: 09 Thickness: 04 Tolerance class: M Special features Coating technology: Tiger·tec Gold Suitability: stainless steel (M), high-temperature superalloys / titanium (S) Intended use: Heavy-duty and difficult-to-machine materials Version: X FAQ What materials is the insert suitable for? The SDMX0904ZDR-E57 WSM35G insert is optimised for stainless steel and for heat-resistant superalloys and titanium alloys, reflecting its WSM35G grade and Tiger·tec Gold coating. How does the E57 chipbreaker affect machining? The E57 chipbreaker promotes controlled chip formation and evacuation, reducing entanglement and improving surface finish during milling operations with the SDMX0904ZDR-E57 insert. Can this insert be indexed multiple times? Yes, the square 90° geometry allows multiple indexing positions, offering economical use of each insert edge when clamped in compatible cutter holders. What are the key dimensional parameters to check before fitting? Check free angle (15°), insert size (09) and thickness (04), and ensure the cutter body accepts SDMX0904ZDR-E57-style inserts with E57 chipbreaker geometry. Is the insert suitable for high-speed machining? The Tiger·tec Gold coating and grade WSM35G support higher thermal resistance and wear control, which can enable increased cutting speeds depending on machine rigidity and cooling; validate parameters per workpiece and machine. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
SDMX0904ZDR-E57 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from the coated carbide WSM45X and the E57 chipbreaker for stable chip formation and reliable edge life when machining stainless steel and high-temperature alloys; the square 90° geometry with a 15° relief angle provides robust engagement and predictable tool behaviour. Order the SDMX0904ZDR-E57 WSM45X directly via Metav Werkzeuge or ask our consultants if needed. SDMX0904ZDR-E57 WSM45X — Indexable milling insert, coated carbide, E57 chipbreaker | Walter Tools The SDMX0904ZDR-E57 WSM45X is an indexable milling insert engineered for heavy-duty machining of stainless steel and heat-resistant alloys, offering a balance of edge stability and chip control suitable for demanding production environments Coated carbide grade WSM45X for tough materials Optimised E57 chipbreaker for controlled chips Square 90° geometry with 15° relief angle Suitable for stainless steel and superalloys Precision where material resistance is the challenge The insert is based on the WSM45X coated carbide grade, developed for applications in stainless steel and heat-resistant superalloys. This composition supports safer chip formation and improved temperature resistance, which reduces the risk of built-up edge and unexpected tool wear. The result is a consistent cutting edge that maintains dimensional accuracy over longer tool life, contributing directly to predictable cycle times and fewer interruptions in production. Geometry that secures engagement and chip control A square 90° plate form combined with a 15° relief angle gives a secure clamping interface and robust cutting engagement. The E57 chipbreaker is designed to fragment chips effectively under varied cutting conditions, improving evacuation and reducing recutting. Together these geometrical features lower the risk of surface damage and support a stable cutting process, which translates into improved surface finish and reduced rework in downstream operations. Productivity gains through matched material performance Designed for the machining of tough alloys, this insert minimises unscheduled tool changes and supports higher material removal rates where process reliability matters most. The coated carbide base delivers wear resistance while the plate geometry ensures steady forces during milling. In practical terms, shops can expect fewer tool interventions and a more economical tool life per component, assisting in reaching throughput and quality targets reliably. Compatibility, handling and process integration The SDMX0904ZDR-E57 designation denotes a standard indexable format compatible with common milling toolholders for square inserts. The tolerance class M ensures repeatable seating and indexed replacement, simplifying tool change routines. For new setups, adopting this plate means predictable mounting behaviour and straightforward inventory management, helping to standardise tooling across similar stainless steel and superalloy processes. Contact Metav Werkzeuge for application-specific advice on Walter Tools inserts and to discuss optimal cutter configurations for stainless steel and superalloy machining Technical Data Article number: SDMX0904ZDR-E57-WSM45X-WALTER Product type: Fräswendeschneidplatte (indexable milling insert) Designation: SDMX0904ZDR-E57 Full designation: SDMX0904ZDR-E57 WSM45X Manufacturer: Walter Tools Facts Size designation: 09 Thickness designation: 04 Relief angle: 15° Geometry: Square 90° Tolerance class: M Special features Coated carbide grade WSM45X Chipbreaker: E57 Material applicability: stainless steel and heat-resistant superalloys / titanium (S / M) Series: Walter Schneidstoffsorte - Serie offen Designed for secure chip formation and stable cutting edges FAQ What materials is this insert suitable for? The SDMX0904ZDR-E57 WSM45X is intended for machining stainless steel and heat-resistant superalloys, with the WSM45X grade optimised for these demanding materials. How does the E57 chipbreaker improve milling? The E57 chipbreaker promotes controlled chip formation and reliable evacuation during milling, lowering the chance of chip entanglement and improving surface quality with the SDMX0904ZDR-E57 insert. Is the insert compatible with standard square insert holders? Yes, the square 90° form and tolerance class M ensure compatibility with common toolholders designed for square indexable plates. What benefits does the WSM45X coating provide? The WSM45X coating increases heat and wear resistance, supporting longer tool life and more consistent cutting behaviour when machining challenging materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the listed brands. The offered article is original, brand-new goods of the manufacturer.
SDMX0904ZDR-E57 WSP45G X Wendeplatten - Walter Tools
Benefit from a combination of Tiger‑tec Gold coating and the E57 chipbreaker for consistent chip control and extended tool life; the 15° clearance and square 90° form add rigidity for stable milling of steels, stainless steels and heat‑resistant alloys. Order the SDMX0904ZDR-E57 WSP45G directly via Metav Werkzeuge or consult our specialists for application support. SDMX0904ZDR-E57 WSP45G — Square 90° milling indexable insert, Tiger‑tec Gold, Walter Tools The SDMX0904ZDR-E57 WSP45G is a Tiger‑tec Gold coated milling insert engineered for productive face and shoulder milling across steels, stainless steel and heat‑resistant alloys, offering a robust chip‑control solution for demanding production environments Tiger‑tec Gold PVD coating for broad material range Designed for steel, stainless steel and superalloys Square 90° form for secure clamping and rigidity E57 chipbreaker for reliable chip control Longer tool life and predictable productivity The Tiger‑tec Gold PVD coating combined with the WSP45G substrate delivers a balance of wear resistance and edge toughness, which translates into longer tool life and fewer indexings. In practice, this means fewer interruptions for tool changes and a steadier production rhythm. The coating technology reduces flank wear and supports higher cutting volumes while maintaining surface integrity on workpieces. Confident performance across challenging materials Engineered for the P/M/S material groups, the insert copes with unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. The grade’s toughness helps avoid build‑up on the cutting edge and supports secure chip formation under elevated temperatures. Combined with a 15° clearance, the geometry minimises rubbing and heat generation, improving dimensional stability during medium to heavy milling. Consistent chip control for cleaner operations The E57 chipbreaker is designed to produce short, controllable chips under typical milling conditions, reducing the risk of recutting and improving surface finish. Reliable chip evacuation lowers the chance of workpiece damage and simplifies swarf management in automated cells. For production lines where repeatability matters, the controlled chip form contributes directly to process stability and consistent part quality. Practical handling and integration in tool systems The square 90° form and standard 09 sizing give the insert good seating stability and straightforward integration into common cutter bodies, aiding fast set‑ups and repeatable clamping. The thickness designation supports a robust cutting edge, suitable for operations requiring rigidity and predictable tool behaviour. This combination reduces set‑up time and helps maintain throughput in busy machining shops. Contact Metav Werkzeuge for tailored application advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SDMX0904ZDR-E57-WSP45G-WALTER Designation: SDMX0904ZDR-E57 WSP45G Manufacturer: Walter Tools Facts Clearance angle: 15° Insert form: Square 90° Size: 09 Thickness: 04 Tolerance class: M Chipbreaker: E57 Special features Coating: Tiger‑tec Gold (PVD coated carbide) Grade: WSP45G Series: Tiger‑tec Gold Material suitability: P / M / S Execution: X FAQ What materials is this insert suitable for? The SDMX0904ZDR-E57 WSP45G insert is suitable for machining steels (P), stainless steel (M) and heat‑resistant superalloys/titanium (S) as specified for the WSP45G grade. How does the E57 chipbreaker influence performance? The E57 chipbreaker on this Walter Tools insert produces short, controlled chips that improve swarf management and surface finish while reducing the risk of recutting. Which cutter geometries benefit most from the square 90° form? Applications requiring rigid clamping and axial stability, such as face and shoulder milling, benefit from the square 90° form and the insert’s 15° clearance. Is the WSP45G grade suitable for interrupted cuts? The WSP45G grade combines toughness and wear resistance to tolerate moderate interruption and variable cutting conditions typical in productive milling tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are cited for explanation only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools.
SDMX1205ZDR-E27 WKP35G Wendeplatten - Walter Tools
Combine the Tiger‑tec Gold wear resistance, the WKP35G grade and the square 90° geometry for consistent chip control and long tool life; order the SDMX1205ZDR‑E27 WKP35G directly via Metav Werkzeuge or consult our advisers if more detailed data is required. SDMX1205ZDR‑E27 WKP35G milling insert – Square 90°, 15° clearance, Tiger‑tec Gold (Walter Tools) The SDMX1205ZDR‑E27 WKP35G is a square 90° milling insert designed for robust face and shoulder milling in steel and cast iron, combining a Tiger‑tec Gold coating with an E27 chipbreaker for stable chip formation and repeatable performance. Tiger‑tec Gold coating for durability Suitable for steel and cast iron Square 90° geometry for robust milling E27 chipbreaker for controlled chips Longer life and predictable productivity with Tiger‑tec Gold The Tiger‑tec Gold coating and the WKP35G grade are engineered to resist abrasive wear and maintain a stable cutting edge under the heat and forces typical of steel and cast iron machining. This combination results in longer tool life and fewer insert changes, which reduces unplanned downtime and improves overall machining throughput. The coating technology is optimised for thermal and mechanical load, so the insert delivers consistent surface quality and repeatable dimensional results across production batches. Geometry and chip control that stabilise process windows The square 90° geometry with a 15° clearance and the E27 chipbreaker provide a balance between cutting strength and chip evacuation. The geometry supports heavy radial engagement and delivers strong edge support for interrupted cuts, while the chipbreaker controls swarf to prevent recutting and tool damage. With a tolerance class of M, the insert maintains consistent seating and clamping accuracy in standard toolholders, helping to reduce vibration and improve cycle‑time stability for series production. Practical integration and material guidance for planners Specified for ISO groups P (steel) and K (cast iron), the insert is suitable where robust performance across these materials is required. The E27 chipbreaker is particularly effective in producing short, manageable chips in cast iron and in moderating long, curled chips when machining steels. For planners and operators, this means fewer interruptions for chip clearing and a lower risk of workpiece or tool damage. Technical staff will value the clear designation and series affiliation, which aid in stock keeping and tool‑path planning. For high‑productivity milling with a proven grade and coating, request availability or technical advice from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SDMX1205ZDR‑E27 WKP35G and suitable toolholder pairings. Technical data Article number: SDMX1205ZDR-E27-WKP35G-WALTER Type: Milling insert (indexable) Designation: SDMX1205ZDR-E27 WKP35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core specifications Geometry: Square 90° Clearance angle: 15° Chipbreaker: E27 Tolerance class: M Insert size: 12 Thickness: 05 Applications & materials Suitable for: Steel (P) Suitable for: Cast iron (K) Grade: WKP35G (coated cemented carbide) Coating technology: Tiger‑tec Gold Execution: X FAQ What materials is this insert intended for? The SDMX1205ZDR‑E27 WKP35G is specified for ISO material groups P and K, making it suitable for machining steel and cast iron. How does the E27 chipbreaker affect machining? The E27 chipbreaker on the insert promotes controlled, short chips in cast iron and improved breakage of steel swarf, which reduces chip entanglement and supports more reliable unattended operation. What does the tolerance class M mean for mounting? Tolerance class M indicates standardised geometry tolerance, ensuring consistent fit and repeatable clamping accuracy in compatible toolholders. Is the Tiger‑tec Gold coating beneficial for batch production? Yes — the Tiger‑tec Gold coating enhances wear resistance and thermal stability, which supports longer tool life and predictable performance across production batches. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
SDMX1205ZDR-E27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of high process reliability, long tool life and consistent chip control for efficient steel machining. Combine the Tiger·tec Gold coating with the WPP35G grade for stable wear behaviour and cost-effective productivity. Order the inserts directly via Metav Werkzeuge or consult our application specialists if required. SDMX1205ZDR-E27 WPP35G milling insert – Square 90°, 15° relief by Walter Tools SDMX1205ZDR-E27 WPP35G is a coated indexable milling insert designed for productive steel machining, offering wear-resistant performance in a compact square format. Tiger·tec Gold coated grade WPP35G Designed for steel (ISO group P) Square 90° form for versatile milling 15° relief angle for controlled cutting Reliable cutting performance for steel-focused production The insert combines a Tiger·tec Gold coating with a WPP35G cutting grade that is optimised for steels (ISO group P). This pairing delivers enhanced wear resistance and stable chip formation, which reduces unexpected tool changes and supports predictable cycle times. The coating technology improves resistance to thermal and abrasive wear, allowing the grade to maintain a sharp edge for longer. In practice, this means fewer interruptions during batch production and more consistent surface finishes, particularly where heat generation and continuous chip evacuation are challenges. Geometry and chip control that improve process stability A square 90° plate shape together with a 15° relief (freedom angle) creates a robust cutting geometry for both shoulder and slot milling. The E27 chipbreaker is engineered to control chip flow when machining unalloyed and alloyed steels, promoting short, segmented chips that evacuate reliably. The insert’s compact format supports rigid clamping and reduces vibration, which benefits dimensional accuracy and tool life. By combining geometry and chipbreaker design, the insert helps to lower cutting forces and deliver consistent performance across a range of feeds and depths of cut. Practical advantages for workshop integration and cost control This insert is suited to diverse milling operations where predictable wear and repeatable results are priorities. The SDMX1205ZDR-E27 WPP35G fits standard toolholders for square 90° plates and can be specified where a balance of toughness and wear resistance is required. Economically, the extended life from the coating and grade reduces per-part tooling costs and supports higher uptime. For production planners, that translates into improved throughput and simpler tool inventory management. For operators new to coated grades, the behaviour is straightforward: longer edge life and stable cutting without additional process complexity. Contact Metav Werkzeuge for an application recommendation tailored to your machine and material and to secure SDMX1205ZDR-E27 WPP35G inserts for reliable steel milling workflows Technical data Article number: SDMX1205ZDR-E27-WPP35G-WALTER Item name: Fräswendeschneidplatte SDMX1205ZDR-E27 WPP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Insert size: 12 Plate thickness: 05 Relief angle: 15° Plate form: Quadrat 90° Chipbreaker: E27 Grade: WPP35G Series: Tiger-tec Gold Tolerance class: M Special features Coating: Tiger·tec Gold Cutting material group suitability: P (steel) Execution: X Material_wpl: P WPL designation without grade: SDMX1205ZDR-E27 FAQ What materials is this insert suitable for? The SDMX1205ZDR-E27 WPP35G insert is designed primarily for steel (ISO group P) applications and performs well on unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating increases wear resistance and reduces thermal degradation of the cutting edge, enabling longer tool life and more consistent cycle times with the SDMX1205ZDR-E27 WPP35G. Which chipbreaker is integrated and what is its advantage? The insert uses an E27 chipbreaker, which promotes reliable chip control and short chip formation when machining steels, improving evacuation and surface quality. Is the SDMX1205ZDR-E27 compatible with standard toolholders? Yes, the SDMX1205ZDR-E27 WPP35G fits holders designed for square 90° indexable inserts and is suitable for common milling tool systems. What production benefits can be expected from using this grade? Expectation with the WPP35G grade includes improved wear resistance, stable cutting behaviour across varying feeds and depths, and reduced tooling-related downtime. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new merchandise from the manufacturer. The Walter AG (brand appearance: Walter Tools) is a leading producer of precision tools for metalworking and is part of the Sandvik Group.
SDMX1205ZDR-E27 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the WSM35G grade for reliable machining of stainless steel and heat‑resistant superalloys; the insert’s E27 chipbreaker and 15° clearance support stable chip formation and consistent surface finish. For application advice or ordering, contact Metav Werkzeuge or consult the technical team. SDMX1205ZDR-E27 WSM35G — Indexable milling insert (Tiger‑tec Gold) by Walter Tools, for stainless steel & superalloys, 15° clearance, square 90° A SDMX1205ZDR-E27 WSM35G indexable milling insert engineered for the productive machining of difficult‑to‑cut materials, combining a coated carbide grade with a dedicated chipbreaker and 90° square geometry. Tiger‑tec Gold coated grade WSM35G Optimised for stainless steel and superalloys Square 90° form with 15° clearance E27 chipbreaker for stable chip control High‑temperature stability for predictable production results The SDMX1205ZDR-E27 WSM35G insert is based on a coated carbide substrate and the Tiger‑tec Gold coating technology, which together raise thermal resistance and edge strength. This combination reduces flank and crater wear when machining stainless steel and superalloys, resulting in more predictable tool life and fewer unplanned standstills. The coating supports secure chip formation under elevated cutting temperatures, so each cut contributes to a stable production flow and consistent part quality. Controlled chips and improved surface integrity With an E27 chipbreaker integrated into the geometry, the insert facilitates effective chip control across interrupted and continuous cuts. The square 90° form and 15° clearance help maintain a robust cutting edge and reduce the tendency to build up edge material when working with adhesive or work‑hardening alloys. As a result, the workpiece surface finish is improved and the need for secondary finishing is reduced, which supports higher throughput and lower overall machining costs. Practical integration and tool‑life optimisation The insert’s size and thickness provide a compact, stable cutting geometry suitable for general milling applications where space and rigidity are considerations. To maximise tool life, combine stable clamping, appropriate coolant strategy and cutting parameters selected for the workpiece alloy and hardness. The grade excels where heat resistance and edge stability are required; pairing the insert with a suitably rigid toolholder and optimised feeds will deliver reproducible results and predictable reconditioning intervals. For application recommendations on Walter Tools Tiger‑tec Gold inserts and to discuss the SDMX1205ZDR-E27 WSM35G for a specific machining setup, contact Metav Werkzeuge for tailored advice and availability — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data SKU: SDMX1205ZDR-E27-WSM35G-WALTER Article designation: SDMX1205ZDR-E27 ISO designation: SDMX1205ZDR-E27 WSM35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade: WSM35G Series: Tiger‑tec Gold Execution: X Tolerance class: M Material groups: S / M Facts Insert size: 12 Insert thickness: 05 Free clearance: 15° Shape: Square 90° Chipbreaker: E27 Special features Coated carbide (beschichtetes Hartmetall) Optimised for stainless steel (M) and heat‑resistant alloys (S) Designed for stable chip formation and long edge life Suitable for applications with high thermal loads FAQ Which materials is this insert suited for? The SDMX1205ZDR‑E27 WSM35G is formulated for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering enhanced edge stability for these challenging materials. What chipbreaker does the insert use and why does it matter? The insert features an E27 chipbreaker which promotes short, controllable chips and reduces the risk of tangling or workpiece damage, supporting higher process reliability with the Walter Tools grade. What are the key geometric features to note for setup? The insert has a square 90° form with 15° clearance and a 12 size/05 thickness; these attributes provide strong cutting edges and predictable engagement in milling toolholders. How does the Tiger‑tec Gold technology benefit machining? Tiger‑tec Gold coating improves thermal resistance and protects the cutting edge, which translates into more consistent cutting performance, especially when machining stainless steel and superalloys with high heat generation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMX1205ZDR-E27 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, versatile P/M/S material capability and a robust square geometry for reliable milling performance; order directly via Metav Werkzeuge or consult our team for process optimisation. SDMX1205ZDR-E27 WSP45G milling indexable insert – Tiger·tec Gold PVD, 15° relief (Walter Tools) The SDMX1205ZDR-E27 WSP45G is a square 90° milling insert optimised for productive roughing and semi-finishing across Stahl, rostfreier Stahl and heat‑resistant superalloys and titanium applications Tiger·tec Gold PVD coating for long tool life Engineered for P/M/S materials compatibility Square 90° form with 15° relief angle E27 chipbreaker for stable chip control Higher productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balance of toughness and wear resistance that directly translates into longer edge life and fewer tool changes. The PVD‑based coating improves thermal resistance and reduces flank wear under typical milling loads, which means more consistent component dimensions and reduced downtime. For manufacturers seeking measurable throughput gains, this insert supports higher metal removal rates while maintaining surface quality, especially when machining medium to high strength Stahl and rostfreier Stahl. Geometry designed for stable chips and predictable machining A square 90° plate form with a 15° clearance produces a robust cutting geometry that resists tipping and offers repeatable insert indexing. The E27 chipbreaker promotes controlled chip formation across a range of feeds, reducing recutting and improving surface finish in interrupted and continuous cuts. The insert’s execution and tolerance class (M) ensure interchangeability in standard toolholders and predictable cutting behaviour—advantages that shorten setup time and simplify process planning in production environments. Practical application and process guidance for milling shops Specified for P / M / S material groups, the insert is particularly suited to components where a combination of toughness and thermal stability is required, such as shafts, housings and aero components made from rostfreier Stahl or nickel‑base alloys. In practice, start with conservative depths of cut and increase feeds to exploit the grade’s toughness; coolant strategy should match the machined material and cycle type. For specific cutting data or to determine the best toolholder pairing, Metav Werkzeuge can provide application support and recommendations to match workshop machinery and production targets. For tailored ordering and application advice on this Walter Tools Tiger·tec Gold insert, contact Metav Werkzeuge for fast supply and technical consultation: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: SDMX1205ZDR-E27-WSP45G-WALTER Label: Fräswendeschneidplatte SDMX1205ZDR-E27 WSP45G Walter Tools Manufacturer: Walter Tools Product type: milling indexable insert Grade/Sort: WSP45G Series: Tiger-tec Gold Facts Relief angle: 15° Plate form: Square 90° Insert size: 12 Plate thickness: 05 Chipbreaker: E27 Tolerance class: M Execution: X Special features Coating: Tiger·tec Gold (PVD) Material compatibility: P / M / S Suitable for: Stahl, rostfreier Stahl, superalloys and titanium Designed for: roughing and semi-finishing milling Brand: Walter Tools FAQ What materials can this insert process effectively? The SDMX1205ZDR-E27 WSP45G insert is designed for P / M / S groups, allowing machining of Stahl, rostfreier Stahl and heat‑resistant superalloys and titanium with stable chip formation and reliable edge life. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating increases thermal resistance and wear protection, extending the service life of the insert and enabling higher productive cutting parameters with reduced flank wear. What does the E27 chipbreaker provide in milling operations? The E27 chipbreaker improves chip control across varying feeds, reducing the risk of recutting and supporting consistent surface finish and process stability during intermittent and continuous cuts. Is the insert compatible with standard toolholders? With its square 90° form and tolerance class M, this plate is intended for standard milling toolholders that accept SDMX‑type inserts; correct seating ensures repeatable accuracy and safe cutting. Can this insert be used for finishing passes? The grade is optimised for roughing and semi‑finishing; finish passes are possible depending on cutting parameters and workpiece material, but the primary benefit is in high‑productivity roughing and reliable semi‑finish cycles. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and indicate no affiliation with our company. The offered article is an original, factory‑new product from Walter Tools.
SDMX1205ZDR-E57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for stable, long-lasting performance in steel and cast iron machining; the 90° square geometry and 15° clearance ensure robust cutting edges and predictable chip control. Order the insert directly via Metav Werkzeuge or consult our application specialists for cutting data and availability. SDMX1205ZDR-E57 WKP35G milling insert — Tiger·tec Gold for steel & cast iron — Walter Tools The SDMX1205ZDR-E57 WKP35G is a square milling insert designed for productive machining of steel and cast iron, combining a high-performance Tiger·tec Gold coating with a WKP35G coated carbide grade for reliable, repeatable results. Tiger·tec Gold coating for extended tool life WKP35G coated carbide grade Square 90° insert geometry 15° clearance for reliable chip control High-performance coating and grade for demanding applications The insert combines the Tiger·tec Gold coating with the WKP35G carbide grade to deliver improved wear resistance and stable cutting behaviour when machining steel and cast iron. The coating reduces adhesive and abrasive wear, which translates into longer productive tool life and fewer changeovers. The designation P / K signals compatibility with the ISO groups for steel (P) and cast iron (K); this means the substrate and coating are optimised for the typical heat generation and chip forms encountered in these materials. The integrated E57 chipbreaker assists in forming short, controlled chips, reducing the risk of entanglement and improving process reliability. Geometry and stability that support consistent machining quality The 90° square geometry and the insert’s construction provide a robust cutting edge suitable for axial and radial engagement in face and shoulder milling. A 15° free angle reduces rubbing and vibration, which improves surface finish and protects the cutting edge under fluctuating depths of cut. The tolerance class M indicates consistent manufacturing precision, supporting repeatable clamping and predictable part quality. Combined, these geometric attributes enable stable tool performance across batch production and single-part runs, lowering scrap rates and increasing throughput. Process efficiency, chip control and predictable costs Designed to balance performance and economy, the coated carbide substrate and chipbreaker promote reliable chip control and steady wear progression, helping to plan tool changes and machine scheduling. Reduced flank wear and stable cutting forces contribute to consistent results and improved component quality over time, supporting cost-effective production. For process optimisation, the insert works best with toolholders and cutter bodies specified for square inserts; for customised cutting parameters or to confirm compatibility with specific machines, Metav Werkzeuge’s consultants provide application advice and cutting data tailored to the machining task. Contact Metav Werkzeuge for tailored cutting data, stock information and application recommendations for the Walter Tools SDMX1205ZDR-E57 WKP35G insert Technical data Article number: SDMX1205ZDR-E57-WKP35G-WALTER Name: Milling insert SDMX1205ZDR-E57 WKP35G Walter Tools Facts Size: 12 Thickness: 05 Free angle: 15° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP35G Chipbreaker: E57 Geometry: Square 90° Suitability: Steel (P) and Cast iron (K) Execution: X ISO designation: SDMX1205ZDR-E57 WKP35G FAQ What materials is this insert best suited for? The SDMX1205ZDR-E57 WKP35G insert is optimised for steel and cast iron, with the WKP35G grade and Tiger·tec Gold coating tuned to those ISO groups. How does the E57 chipbreaker affect machining? The E57 chipbreaker on this insert promotes short, controllable chips, improving chip evacuation and reducing the risk of build-up and interruption during milling. Which geometry advantages does the square 90° form provide? A 90° square geometry delivers a robust cutting edge for face and shoulder milling, offering strength for higher depths of cut and stable tool engagement. Is this insert suitable for high-feed operations? The coated carbide grade and geometry of the SDMX1205ZDR-E57 WKP35G support productive milling; specific high-feed suitability depends on the chosen cutter body and cutting parameters. How does the Tiger·tec Gold coating improve tool life? The Tiger·tec Gold coating enhances resistance to adhesive and abrasive wear, which helps maintain cutting-edge integrity and extends productive tool life in demanding steels and cast irons. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SDMX1205ZDR-E57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip formation and a Tiger‑tec Gold coating for consistent performance in demanding milling tasks; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. SDMX1205ZDR-E57 WSM35G milling insert — 15° clearance, 12 mm square | Walter Tools The SDMX1205ZDR-E57 WSM35G is a square indexable milling insert designed for heavy-duty machining of stainless steel and heat‑resistant alloys, offering a coated carbide grade optimised for secure chip control. Square 90° insert, 12 mm size 15° clearance angle for stable cutting Tiger‑tec Gold coated carbide grade WSM35G Suited for stainless steel and superalloys Increased process reliability for stainless and difficult-to-cut alloys The combination of the WSM35G grade and the Tiger‑tec Gold coating delivers improved thermal stability and wear resistance during continuous milling operations. This grade is engineered to counteract the typical problems of machining stainless steel — such as built-up edge and high cutting temperatures — by promoting a stable cutting edge and predictable tool life. The insert’s geometry supports dependable chip formation, which reduces process interruptions and helps maintain consistent surface quality on workpieces classified under ISO group M. Coating and grade that extend tool life and productivity A hard, multi-layer coating in the Tiger‑tec Gold family provides a barrier against abrasive wear and thermal softening, so the cutting edge remains sharper for longer. For applications in superalloys and titanium (ISO group S), this results in less edge chipping and improved cycle times. The coated carbide substrate balances toughness and hardness, enabling higher cutting data where appropriate and thus supporting economical production through longer service intervals and fewer tool changes. Robust geometry for secure engagement and accurate results The 90° square form and 15° clearance angle create a positive cutting geometry that is particularly effective in shoulder milling and slotting operations. The defined chipbreaker type E57 assists in controlled chip segmentation and evacuation, reducing the risk of re-cutting and improving surface finish. The insert thickness and form deliver mechanical stability under radial and axial loads, contributing to repeatable dimensional accuracy and reducing the likelihood of premature edge failure in interrupted cuts. Contact Metav Werkzeuge for application recommendations on Walter Tools Tiger‑tec Gold inserts or to discuss cutting data tailored to specific stainless steel grades — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: SDMX1205ZDR-E57-WSM35G-WALTER Article designation: SDMX1205ZDR-E57 WSM35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade/sort: WSM35G Core specifications Plate size: 12 Plate form: Square 90° Clearance angle: 15° Plate thickness: 05 Tolerance class: M Design & special features Chipbreaker: E57 Applicable materials: S / M Suitable for stainless steel: yes Execution: X FAQ What materials is this insert suitable for? The SDMX1205ZDR-E57 WSM35G insert is designed for machining stainless steel and heat‑resistant superalloys (ISO groups M and S), offering stable edge behaviour and good chip control. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WSM35G grade increases thermal and abrasive resistance, which prolongs tool life and enables more consistent cutting in demanding applications. What is the function of the E57 chipbreaker? The E57 chipbreaker promotes controlled chip segmentation and evacuation, reducing the chance of re‑cutting and improving surface finish during milling. Is the insert suitable for interrupted cuts and shoulder milling? Yes, the 90° square geometry and the insert’s robust design provide mechanical stability for shoulder milling and interrupted cutting conditions. Which replacement code should be ordered for the Walter Tools insert? Order the SKU SDMX1205ZDR-E57-WSM35G-WALTER for the specified Walter Tools Tiger‑tec Gold insert Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers (Walter Tools).
SDMX1205ZDR-E57 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide grade WSM45X, a 15° relief angle and the E57 chipbreaker to achieve stable cutting edges and reliable chip formation when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or request application advice from our consultants. SDMX1205ZDR-E57 WSM45X — indexable milling insert, square 90°, 15° relief — Walter Tools The SDMX1205ZDR-E57 WSM45X is a square indexable milling insert designed for heavy‑duty machining of stainless steels and heat‑resistant superalloys, offering robust edge stability and consistent chip control. Coated carbide grade WSM45X for tough materials 15° relief angle, square 90° geometry E57 chipbreaker for stable chip formation Optimised for stainless steel and superalloys Greater process reliability through grade and coating The technical core of this insert is the WSM45X coated carbide, a grade engineered for high thermal and mechanical loads. This composition supports process security by resisting edge wear and reducing built‑up edge formation when cutting difficult-to-machine alloys. The combination of a wear‑resistant coating and a stable substrate translates into longer in‑service life and fewer tool changes, which benefits throughput and reduces unplanned downtime in production environments. Controlled chips and improved surface quality The interaction of the E57 chipbreaker with the square 90° geometry and 15° relief angle produces predictable chip shapes and evacuation. Controlled chip breaking lowers the risk of recutting and helps maintain a consistent cutting edge, which in turn improves surface finish. For machining operations where repeatability and component quality matter, this geometry supports steady material removal rates and reduces the need for secondary finishing. Application range and practical guidance for use This insert is specified for ISO material groups M and S — in practical terms, stainless steels and heat‑resistant superalloys or titanium. The geometry and grade make it suitable for roughing and light finishing passes depending on cutter body and machining parameters. For adaptation to specific toolholders and cutting data, consult cutters’ documentation and match the insert seating to the tool’s clamping system. Technical advice is available for optimising feeds, speeds and depth of cut to balance tool life and component quality. Contact Metav Werkzeuge for tailored cutting data and application support for Walter Tools SDMX1205ZDR-E57 WSM45X inserts Technical Data SKU: SDMX1205ZDR-E57-WSM45X-WALTER Designation: SDMX1205ZDR-E57 WSM45X Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / indexable milling insert Series: Walter Schneidstoffsorte - Serie offen Grade/sort: WSM45X Execution/type code: X Chipbreaker: E57 Tolerance class: M Numbers / Core technical data Plate size: 12 Plate thickness code: 05 Relief angle: 15° Plate form: Square 90° Special features / Versions Coated carbide (coated hard metal) Suitable for stainless steels (ISO group M) Suitable for superalloys and titanium (ISO group S) Stable cutting edge and optimised chipformer Designed for heavy and heat‑loaded machining FAQ What materials is this insert best suited for? The SDMX1205ZDR-E57 WSM45X insert is optimised for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering improved edge stability under high thermal loads. How does the E57 chipbreaker affect machining? The E57 chipbreaker produces controlled chip shapes that ease evacuation and reduce recutting, contributing to a steadier cutting edge and better surface quality when using the SDMX1205ZDR-E57 WSM45X. What does the 15° relief angle mean for cutting? A 15° relief angle reduces rubbing behind the cutting edge, lowering heat generation and supporting longer edge life without compromising strength for interrupted or heavy cuts. Is this insert suitable for finishing passes? Depending on cutter body and cutting parameters, the insert can be used for both robust roughing and controlled finishing; optimisation of feeds and speeds is recommended for the required surface quality. Which cutter types accept this insert format? The square 90° format is compatible with milling cutter bodies designed for SDMX inserts; ensure correct seating and clamping according to the toolholder specification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only and do not imply any affiliation with our company. The offered item is an original, factory‑new product from the stated manufacturer.
SDMX1205ZDR-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the versatile WSP45G grade for consistent tool life and secure chip control in demanding milling applications; order via Metav Werkzeuge or consult the team for application-specific advice. SDMX1205ZDR-E57 WSP45G milling indexable insert — Square 90°, 15° relief | Walter Tools SDMX1205ZDR-E57 WSP45G is a high-performance milling indexable insert designed for productive milling across a wide range of materials Tiger·tec Gold PVD coating for long life Suitable for Stahl, rostfreier Stahl and high-temp alloys Square 90° geometry for robust edge strength E57 chipformer for controlled chip formation Enhanced coating for longer productive runs The combination of the Tiger·tec Gold technology with the WSP45G grade provides a PVD-based coating system engineered to reduce flank wear and preserve the cutting edge under typical milling loads. This results in longer intervals between regrinds and predictable performance in series production. The PVD layer improves heat resistance and reduces adhesion, which benefits applications that generate elevated temperatures during cutting. For operations that prioritise uptime and repeatable part quality, the coated grade supports a cost-effective balance between tool life and productivity. Broad material capability for mixed production Designed for ISO material groups P, M and S, the insert supports machining of unalloyed and alloyed Stahl, stainless-grade rostfreier Stahl and heat-resistant superalloys or titanium. The assignment to these groups indicates that the geometry and grade control typical chip behaviour and cope with different thermal loads. For machinists working across mixed batches, this flexibility reduces tool changes and simplifies tool inventory. The grade’s toughness is particularly useful where intermittent cuts, built-up edge or variable workpiece conditions occur. Geometry and chip control to secure cutting processes The square 90° shape combined with a 15° relief angle gives a stable cutting corner and good strength for radial and axial engagements. The E57 chipformer is tuned to produce short, controlled chips in a broad range of cutting parameters, reducing the risk of entanglement and improving surface finish. The nominal plate size 12 and plate thickness 05 contribute to a rigid clamping condition when used in compatible toolholders, helping to maintain dimensional consistency. This geometry supports both light finishing passes and more demanding roughing cuts where edge stability matters. For high-productivity milling with reliable tool life, discuss the Walter Tools Tiger·tec Gold SDMX1205ZDR-E57 WSP45G insert with Metav Werkzeuge — contact via eMail info@metav-werkzeuge.com or call +49 2822 7131930 to identify the best variant for the application Technical Data Article number: SDMX1205ZDR-E57-WSP45G-WALTER Product name: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Facts Grade / series: Tiger·tec Gold / WSP45G Relief angle: 15° Shape: Square 90° Size: 12 Thickness: 05 Tolerance class: M Special features Chipformer: E57 Material suitability: P / M / S Execution: X ISO designation: SDMX1205ZDR-E57 WSP45G FAQ What materials can be machined with this insert? The SDMX1205ZDR-E57 WSP45G insert is suitable for ISO groups P, M and S — that is, various grades of Stahl, rostfreier Stahl and heat-resistant superalloys/titanium. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances heat resistance and reduces adhesion at the cutting edge, which typically extends tool life and improves process stability for milling operations. What advantage does the square 90° geometry provide? A square 90° geometry delivers a strong corner for demanding radial loads, offering stable cutting edges that help maintain dimensional accuracy in interrupted or continuous milling passes. Which chipformer is fitted and what is its function? This insert uses an E57 chipformer, engineered to generate short, controlled chips that reduce the risk of chip build-up and promote consistent surface quality. Is this insert appropriate for mixed-batch production? Yes — the combination of WSP45G grade and the Tiger·tec Gold coating makes the insert versatile across a range of materials, simplifying tooling logistics for mixed production. Manufacturer: Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SEHT1204AFN WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of economical uncoated carbide performance, square 90° geometry and a 20° clearance angle for consistent milling results; order the SEHT1204AFN WK10 directly via Metav Werkzeuge or contact our consultants for application advice. SEHT1204AFN WK10 milling indexable insert (Square 90°, 20° clearance) – Walter Tools A SEHT1204AFN WK10 milling insert designed for general milling tasks, offering an uncoated carbide grade in a square 90° format with a 20° clearance angle. Square 90° insert for versatile milling 20° clearance angle for secure chip formation Uncoated carbide grade WK10 for reliable cutting Size 12 and thickness 04 for standard toolholders Higher productivity through consistent cutting performance The combination of the WK10 cutting grade and the square geometry provides a dependable baseline for many milling operations. The uncoated carbide composition delivers stable chip formation and predictable tool life under standard cutting conditions, which translates into fewer tool changes and improved uptime. For production planners this means better process predictability and reduced unplanned interruptions. Technical customers will recognise that an open series grade offers straightforward sorting and selection; non-technical readers can understand this as a proven, economical solution for routine milling tasks. Flexible tool setups thanks to defined geometry and angles A square 90° geometry paired with a 20° clearance angle allows the insert to be used in a variety of toolholders and orientations, supporting both face and peripheral milling approaches. The given size 12 and thickness 04 correspond to common insert dimensions, simplifying integration into existing toolkits. The defined clearance angle reduces rubbing on the flank, improving surface finish and reducing heat build-up. In practice this means easier insertion into tool assemblies and consistent contact geometry during machining, which benefits set-up times and repeatability. Material suitability and application guidance for secure results The grade is documented as an uncoated carbide within an open series and the manufacturer recommends checking the product matrix for specific workpiece materials and cutting data. This insert is catalogued as a versatile option, but appropriate selection depends on the intended workpiece material and cutting parameters. For components where exact material compatibility or higher wear resistance is required, consultation with application specialists will help determine whether this grade meets the process demands or if a coated alternative is preferable. The objective is to secure both productivity and part quality while avoiding premature tool wear. For proven Walter Tools performance with the WK10 insert, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SEHT1204AFN-WK10-WALTER Product: Fräswendeschneidplatte (milling indexable insert) Designation: SEHT1204AFN WK10 Manufacturer: Walter Tools Execution: T Core data Size: 12 Thickness: 04 Clearance angle: 20° Plate form: Square 90° Tolerance class: H Special features Grade: WK10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig ISO designation: SEHT1204AFN WK10 Note: Check product matrix for workpiece suitability FAQ What materials is the SEHT1204AFN WK10 suitable for? The SEHT1204AFN WK10 is an uncoated carbide insert; refer to the product matrix for specific workpiece compatibility and typical applications with Walter Tools recommendations. How does the 20° clearance angle affect machining? A 20° clearance angle reduces flank contact and helps to maintain surface finish and cutting stability when using the SEHT1204AFN WK10 in standard milling operations. Can the SEHT1204AFN WK10 be used in existing toolholders? The square 90° geometry and standard size 12 / thickness 04 of the SEHT1204AFN WK10 facilitate use in many common toolholders; verify holder compatibility before assembly. Is the WK10 grade coated or uncoated? WK10 is specified as an uncoated carbide grade in the Walter Tools series, offering a cost-effective baseline for general milling tasks. Where to get application advice for this insert? For technical recommendations and cutting data for the SEHT1204AFN WK10, Metav Werkzeuge can provide tailored support and availability information. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected designations are mentioned here for explanatory purposes only; there is no connection between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SEHT1204AFN WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Silver coating and the WKP35S grade for consistent, high‑productivity milling in steel and cast iron; the square 90° form with a 20° relief angle ensures stable cutting and repeatable edge life — order directly via Metav Werkzeuge or consult our specialists for application advice. SEHT1204AFN WKP35S Milling Insert, Tiger‑tec Silver, for Steel and Cast Iron — Walter Tools The SEHT1204AFN WKP35S is a coated carbide milling insert from the Tiger‑tec Silver series, engineered for productive machining of steel and cast iron in industrial milling applications. Tiger‑tec Silver coated carbide grade WKP35S Optimised for steel and cast iron machining Square 90° form with 20° relief angle Stable performance for industrial milling Reliable coating and grade for demanding materials The combination of the Tiger‑tec Silver technology and the WKP35S grade provides a coated carbide solution designed to resist abrasive wear and to manage the typical heat and chip formation encountered when machining steel and cast iron. This composition improves process consistency and reduces the frequency of tool changes, contributing to a more predictable production flow. The coating supports steady cutting-edge behaviour under industrial conditions, which translates into fewer interruptions and higher overall productivity. Geometry that supports stability and surface quality The insert’s square 90° form together with a 20° relief angle creates a stable cutting geometry that resists deflection during heavy cuts. The thickness code 04 and tolerance class H indicate robust mechanical integrity and repeatable seat fitment in standard toolholders, helping to maintain surface quality across workpieces. These geometric choices reduce vibration and promote uniform wear, so machining results remain consistent over longer tool life. Designed for process reliability and straightforward integration As an indexable solution intended for industrial milling, this insert fits common holders and can be integrated into existing tooling systems with minimal adjustment. The coated grade and form factor focus on productive machining, delivering stable removal rates and reliable edge life in serial production. Specification-driven selection — based on ISO groups for material compatibility — supports efficient process planning and lowers the risk of mismatched tool/material combinations. Application notes and material compatibility This insert is aimed at ISO groups P and K, meaning main applications are steel (P) and cast iron (K). The design and grade are tailored to the thermal and mechanical behaviour of these materials: the coating mitigates abrasive wear typical of cast iron, while the substrate and geometry handle the chip formation and heat generation of steels. For applications outside these groups, consult tooling data or Metav Werkzeuge’s specialists to confirm suitability. For robust, repeatable milling with Tiger‑tec Silver, contact Metav Werkzeuge for tailored application support and reliable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SEHT1204AFN-WKP35S-WALTER ISO designation: SEHT1204AFN WKP35S Product type: milling insert Manufacturer: Walter Tools Facts Insert size: 12 Relief angle: 20° Plate form: Square 90° Thickness code: 04 Tolerance class: H Special features Series: Tiger‑tec Silver Grade: WKP35S Material compatibility: P / K (steel / cast iron) Execution: T Coated carbide cutting material FAQ What materials is this insert suitable for? The SEHT1204AFN WKP35S insert is formulated for steel (ISO P) and cast iron (ISO K), reflecting the Tiger‑tec Silver grade’s balance between wear resistance and toughness. How does the square 90° form affect milling? A square 90° geometry provides strong cutting edges and good radial stability in milling operations, which helps the insert deliver consistent surface quality under load. Which series and grade does this insert belong to? This insert is part of the Tiger‑tec Silver series and carries the WKP35S grade, a coated carbide composition optimised for industrial machining of P and K materials. Is the relief angle relevant for heavy cuts? Yes — the 20° relief angle supports stable cutting and reduced contact on the flank face, contributing to longer edge life during heavier milling passes. Where can application advice be obtained? Metav Werkzeuge provides application support and can advise on tooling setups for the SEHT1204AFN WKP35S to ensure process compatibility and optimum performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
SEHT1204AFN WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from the combination of long edge life, high process security and suitability for steel machining; order the SEHT1204AFN WPP35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. SEHT1204AFN WPP35G Milling insert — Walter Tools (Tiger·tec Gold, for steel, 20° clearance) A SEHT1204AFN WPP35G milling insert designed for productive steel machining, offering a square 90° geometry and a 20° clearance angle for stable shoulder and face milling. Tiger·tec Gold coated carbide for extended tool life Optimised for steel machining (ISO P group) Square 90° insert form with 20° clearance Tolerance class H with reliable chip control Longer tool life and consistent productivity with Tiger·tec Gold The Tiger·tec Gold technology and the WPP35G grade combine a coated carbide substrate with a modern coating system engineered for steel machining. This results in improved resistance to flank wear and stable cutting-edge behaviour under thermal load. The coating and substrate pairing target the typical heat generation and chip formation seen when machining unalloyed and alloyed steels, delivering extended edge life and fewer insert changes. For production environments this translates into steadier cycle times and reduced tooling interventions, supporting higher overall equipment effectiveness. Geometric stability and process security for demanding milling tasks A square 90° insert form with a 20° clearance provides a robust cutting geometry that supports both face and shoulder milling operations. The insert size code 12 together with thickness code 04 yields a compact yet stable cutting body suitable for medium to heavy engagement. The specified tolerance class H ensures repeatable seating in the toolholder and predictable runout behaviour, which benefits surface finish and dimensional consistency. Where chip control is critical, the combination of the insert form and the WPP35G grade promotes stable chip breaking and manageable swarf evacuation. Practical selection and application guidance for production planners For machining strategies focused on steels (ISO P), the grade offers a balanced compromise between wear resistance and toughness, categorised as suitable across several cutting conditions: wear-resistant for higher speeds and universal for a broad range of operations. The insert’s coated carbide construction supports elevated cutting parameters while maintaining process security and consistent surface quality. When integrating the insert into a production line, pairing it with a matching Walter Tools toolholder and optimised cutting data will help to exploit the productivity and longevity benefits of the Tiger·tec Gold range. Contact Metav Werkzeuge to discuss the SEHT1204AFN WPP35G insert for steel applications and receive personalised recommendations or cutting-parameter guidance — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: SEHT1204AFN-WPP35G-WALTER Product name: Fräswendeschneidplatte (milling insert) Designation: SEHT1204AFN WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Execution: T Facts Clearance angle: 20° Insert form: Square 90° Insert size: 12 Thickness code: 04 Tolerance class: H Special features Coated carbide grade (Tiger·tec Gold) Suited for steel (ISO P) Stable chip formation and process security Optimised for shoulder and face milling FAQ What materials is this insert recommended for? The SEHT1204AFN WPP35G insert is optimised for steel (ISO P group); the WPP35G grade is tailored to handle the heat and chip formation typical of unalloyed and alloyed steels. How does the Tiger·tec Gold series benefit milling operations? Tiger·tec Gold provides a modern coating-substrate combination that increases wear resistance and edge stability, helping the SEHT1204AFN WPP35G maintain consistent performance and extend tool life in production use. What advantages does the square 90° geometry provide? The square 90° form offers a robust cutting edge suited for shoulder and face milling, improving stability under radial load and supporting reliable surface finish results. Is the insert suitable for high-speed machining? The coated carbide construction of the WPP35G grade supports elevated cutting speeds while maintaining edge life; actual parameters depend on workpiece material, depth of cut and toolholder rigidity. What does tolerance class H mean for insertion accuracy? Tolerance class H indicates tight manufacturing tolerances for the insert, which ensures repeatable seating in the toolholder and predictable runout, contributing to dimensional consistency and process reliability. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com