SNGX1205ANN-F67 WSP45G Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger·tec Gold coating and a F67 chipbreaker that delivers consistent chip control and long edge life in demanding milling operations; the square 90° geometry with a negative 0° rake ensures stable cutting in a wide range of steels and high-temperature alloys. Order the SNGX1205ANN-F67 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants for application support. SNGX1205ANN-F67 WSP45G milling insert – Walter Tools (Tiger·tec Gold, square 90°) SNGX1205ANN-F67 WSP45G is a PVD-coated, square milling indexable insert designed for versatile milling of steels, stainless steels and high-temperature alloys in production environments. Tiger·tec Gold PVD-coated carbide Versatile for steel, stainless and superalloys Square 90° geometry with negative 0° rake F67 chipbreaker for stable chip formation Consistent milling performance for mixed-material production The combination of a PVD-coated carbide grade and a purpose-designed chipbreaker delivers high process reliability in variable production runs. The coated grade from the Tiger·tec Gold family provides a balanced resistance to wear and thermal loading, which means fewer tool changes and more time on the machine. For mixed batches of unalloyed and alloyed steels, the insert’s geometry reduces vibrations and supports repeatable surface quality, helping to maintain throughput and minimise rework. Improved edge stability and chip control reduces downtime The insert’s F67 chipbreaker promotes predictable chip formation even under interrupted cuts and varying feed rates. Predictable chip behaviour lowers the risk of built-up edge and minimises heat concentration at the cutting zone, extending the life of the cutting edge. As a result, cycle times remain stable and scrap rates decrease, contributing to measurable production efficiency gains. Geometry and grade tailored for tough materials The square 90° plate form and negative 0° rake provide a robust cutting edge suited to heavier engagement and shoulder milling operations. The selected grade is optimised for machining P, M and S material groups (stainless and heat-resistant alloys, including titanium and superalloys), enabling one indexable solution across several workpiece materials. This reduces inventory complexity and simplifies insert selection for shops handling diverse components. Practical benefits for shopfloor integration The insert’s standard designation and compact size allow for straightforward inventory management and fast replacement, supporting lean tool provisioning. Tolerance class G and the stable cutting geometry ensure consistent mounting and predictable performance in standard toolholders. The result is less time spent on adjustments and quicker ramp-up for new programmes, which supports on-time delivery and reliable production planning. For application-specific advice on the Walter Tools SNGX1205ANN-F67 WSP45G Tiger·tec Gold insert, and to discuss suitable toolholders or cutting data, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team provides practical, production-oriented guidance. Technical data SKU: SNGX1205ANN-F67-WSP45G-WALTER Label: Fräswendeschneidplatte SNGX1205ANN-F67 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Facts Size: 12 Thickness: 05 Plate form: Square 90° Free angle: 0° (negative) Tolerance class: G Special features Grade: WSP45G Chipbreaker: F67 Coating: Tiger·tec Gold (PVD) Execution: X Material suitability: Steel; Stainless steel; Superalloys / Titanium Material family: P / M / S FAQ What materials is this insert suitable for? The SNGX1205ANN-F67 WSP45G insert is suitable for machining steels, stainless steels and heat-resistant superalloys (P / M / S material groups) thanks to its Tiger·tec Gold PVD-coated grade. How does the F67 chipbreaker benefit production? The F67 chipbreaker on the Walter Tools insert promotes consistent chip formation and reduced built-up edge, which improves tool life and lowers the frequency of interruptions for chip clearance. What is the plate geometry and how does it affect milling? The insert features a square 90° plate form with a negative 0° rake; this geometry provides a robust cutting edge for shoulder milling and heavier engagements, enhancing edge stability and process security. Can this insert be used for finishing and roughing? Yes, the combination of grade and chipbreaker allows the insert to perform reliably across a range of cutting conditions, making it suitable for both finishing and light to moderate roughing in compatible materials. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original factory-new product of the manufacturer.
SNGX1205ENN-F27 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the WKP25S grade and the F27 chipbreaker for consistent chip control and long tool life; order the SNGX1205ENN‑F27 WKP25S milling insert via Metav Werkzeuge or consult the team for application-specific advice. SNGX1205ENN-F27 WKP25S – Square 90° indexable milling insert, Tiger‑tec Silver (Walter Tools) SNGX1205ENN-F27 WKP25S is a coated carbide milling insert engineered for productive machining of steel and cast iron, offering stable cutting with a square 90° geometry. Tiger‑tec Silver coated grade WKP25S Square 90° geometry for robust milling Negative 0° rake for stable cutting Chipbreaker F27 for controlled chip formation High productivity through optimised coating and grade The Tiger‑tec Silver coating combined with the WKP25S carbide grade delivers a balance of wear resistance and thermal stability that boosts machining consistency. The coating reduces flank wear and helps maintain a stable cutting edge, while the grade itself is tuned for the heat and chip formation typical when machining steel and cast iron. This results in fewer tool changes and improved process reliability, which directly supports higher throughput on serial and batch production runs. Precise chip control and secure cutting geometry The square 90° insert form and integrated chipbreaker F27 promote predictable chip formation and evacuation. The 0° negative rake increases robustness at the cutting edge, which is advantageous for interrupted cuts or heavy depth of cut applications. By combining geometry and chip control, the insert reduces the risk of damaging workpiece surfaces and fixtures, enabling repeatable cycle times and consistent surface quality — important for shops aiming for both efficiency and quality assurance. Versatile application and simple toolset integration Designed for the machining groups P (steel) and K (cast iron), the insert is suitable for a wide range of common production tasks. The form factor and standard designation allow straightforward integration into existing milling cutters and toolholders that accept SNGX‑style inserts, minimising tool inventory complexity. Technical users benefit from the coated carbide construction: it is optimised for conventional feeds and speeds while supporting elevated cutting parameters where process security is required. Contact Metav Werkzeuge for material-matched recommendations and to secure supply of the Walter Tools SNGX1205ENN‑F27 WKP25S milling insert. Technical data Article number: SNGX1205ENN-F27-WKP25S-WALTER Designation: SNGX1205ENN-F27 WKP25S Type: Milling indexable insert (coated carbide) Facts Size: 12 Thickness: 05 Free rake angle: 0° (negative) Shape: Square 90° Tolerance class: G Special features Coating: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: F27 Suitable for: Steel (P), Cast iron (K) Series: Tiger‑tec Silver Execution: X FAQ What materials is this insert designed for? The SNGX1205ENN‑F27 WKP25S insert is designed for machining steel (P) and cast iron (K), reflecting the grade and coating combination of Tiger‑tec Silver and WKP25S. How does the F27 chipbreaker affect machining? The F27 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which helps maintain surface finish and reduces the likelihood of chip-related interruptions. What benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances wear resistance and thermal stability, resulting in longer edge life and more consistent cutting performance when using the WKP25S grade. Is the insert suitable for interrupted cuts? Yes — the square 90° geometry and 0° negative rake increase edge robustness, making the insert well suited to interrupted cutting conditions and heavy engagement. Can the insert be used in standard SNGX toolholders? The product follows the SNGX‑style designation and is compatible with standard milling cutters and toolholders that accept this insert form, simplifying tool integration. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product of the manufacturer.
SNGX1205ENN-F27 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP35G carbide grade and a square 90° geometry for consistent chip control and extended tool life; order directly via Metav Werkzeuge or request advice from our consultants to match the insert to specific machining operations. SNGX1205ENN-F27 WKP35G milling insert (Tiger·tec Gold) – for steel and cast iron | Walter Tools The SNGX1205ENN-F27 WKP35G is a square 90° milling insert with a 0° negative rake, developed for productive finishing and semi-finishing of steel and cast iron components. Tiger·tec Gold coating for enhanced wear resistance WKP35G grade for robust cutting edge Square 90° form with 0° negative rake Optimised F27 chipbreaker for stable chip control Maximised cutting performance and consistent tool life The coated Tiger·tec Gold surface together with the WKP35G carbide grade delivers a balance of wear resistance and toughness that helps maintain a stable cutting edge under typical steel and cast iron machining conditions. The negative 0° free angle and square 90° form provide a secure cutting geometry that supports predictable forces and vibration behaviour, which translates into improved surface finish and fewer interrupted cuts. The design emphasises efficiency: predictable tool life reduces unplanned tool changes and contributes to higher process throughput in both batch and serial production environments. Reliable chip control and process security Equipped with the F27 chipbreaker, this insert enables controlled chip formation across a range of feed rates and depths of cut, reducing the risk of chip entanglement and machine downtime. The chip management capability is particularly relevant when machining ISO group P (steel) and ISO group K (cast iron), where chip form and heat development differ markedly. The combination of geometry and chipbreaking technology supports stable machining windows, allowing planners and operators to choose conservative parameters for critical features or push productivity where process capability allows. Practical application guidance for shops and production lines The SNGX1205ENN-F27 WKP35G insert is suited to operations that demand repeatable results on steel and cast iron workpieces, from component facing to side milling. Selection of the WKP35G grade is intended to address the abrasive tendencies of cast materials while retaining resistance to thermal wear in steels. For integration, consider toolholder rigidity and recommended cutting data from Walter Tools; the insert’s square geometry offers flexibility for toolpath planning and indexable relief angles, simplifying inventory management for multi-operational tool assemblies. For machining operations that prioritise process security and long tool life, contact Metav Werkzeuge to source the Walter Tools SNGX1205ENN-F27 WKP35G with Tiger·tec Gold — Metav’s consultants provide specification support and practical delivery options. Technical data Article number: SNGX1205ENN-F27-WKP35G-WALTER Product type: Milling insert Manufacturer: Walter Tools Designation: SNGX1205ENN-F27 WKP35G Numbers / Core technical data Plate size: 12 Thickness code: 05 Free angle: 0° (negative) Plate form: Square 90° Tolerance class: G Designs / Special features Coating / series: Tiger·tec Gold Grade: WKP35G Material code: P / K Chipbreaker: F27 Geometry code: X Main applications: Steel, Cast iron FAQ What materials is this insert suitable for? The SNGX1205ENN-F27 WKP35G is designed for ISO group P (steel) and ISO group K (cast iron) applications and is optimised for those material behaviours. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold on the WKP35G grade improves wear resistance and thermal stability, which supports longer cutting life and more consistent component quality during extended runs. Can the square 90° form be used for different milling operations? Yes, the square 90° geometry of the insert allows versatile use for facing, side milling and light profiling where a robust cutting edge is required. What role does the F27 chipbreaker play in process stability? The F27 chipbreaker is engineered to deliver controlled chip formation, reducing the chance of chip-related interruptions and aiding safe evacuation during machining of steel and cast iron. Is this insert suitable for high-feed or heavy-roughing applications? The insert’s design favours finishing and semi-finishing with reliable edge stability; for high-feed or heavy-roughing, toolholders and machining parameters should be reviewed against the intended application and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
SNGX1205ENN-F27 WPP35G Wendeplatten - Walter Tools
Benefit from a combination of high process security, efficient chip control and broad steel compatibility thanks to the Tiger·tec Gold grade and the F27 chipbreaker; this ensures consistent results and reduced rework. Order the SNGX1205ENN-F27 WPP35G directly via Metav Werkzeuge or ask our consultants if needed. SNGX1205ENN-F27 WPP35G — Milling indexable insert (square 90°) by Walter Tools The SNGX1205ENN-F27 WPP35G is a square 90° milling insert designed for productive steel machining applications, featuring a Tiger·tec Gold coated carbide grade and a dedicated F27 chipbreaker. Tiger·tec Gold coated for high process security WPP35G grade optimised for steel machining Square 90° form with 0° (negative) relief Chipbreaker F27 for controlled chip formation Consistent productivity through optimised grade and coating The Tiger·tec Gold series, represented here by the WPP35G grade, is engineered for process security and long tool life when machining steels. The coated carbide composition provides thermal and wear resistance, which translates into fewer tool changes and steadier cycle times. For machining shops focusing on repeatable component quality, the combination of a resilient coating and a grade tuned for steel leads to measurable productivity gains without complex setup changes. Precise chip control and edge stability for safer machining The insert’s F27 chipbreaker and square 90° geometry are designed to produce predictable, segmented chips when cutting steels, reducing the risk of long, stringy swarf and improving surface consistency. The 0° (negative) relief contributes to a robust cutting edge that tolerates stability variations in workholding and machine rigidity. As a result, the tool supports safer, cleaner operations and a lower scrap rate, which is particularly valuable in high-volume milling tasks. Simple integration and clear application range Marked for steel applications (ISO group P), this insert suits a wide range of unalloyed and alloyed steels and is intended for conventional milling operations where durability and reliable chip formation are priorities. The square form factor offers flexible orientation options for indexable use, while the series’ specification aids process planning: predictable wear behaviour permits easier tool life estimation and inventory management in production environments. For robust steel milling with Tiger·tec Gold reliability, consider the Walter Tools WPP35G inserts and contact Metav Werkzeuge for availability and application advice — Metav Werkzeuge provides technical consultancy to support integration into existing production processes. Technical data SKU: SNGX1205ENN-F27-WPP35G-WALTER Label: Fräswendeschneidplatte SNGX1205ENN-F27 WPP35G Walter Tools Core specifications Grade: WPP35G Coating series: Tiger·tec Gold Insert form: Square 90° Relief angle: 0° (negative) Chipbreaker: F27 Size: 12 Thickness: 05 Tolerance class: G Execution: X Materials & applications Suitable for: Steel (P) Coating type: Coated carbide Series: Tiger·tec Gold Designation: SNGX1205ENN-F27 WPP35G FAQ What materials is this insert intended for? This insert is designed for machining steels (ISO group P); the WPP35G grade and Tiger·tec Gold coating are optimised for the heat and chip formation typical of steel cutting. How does the F27 chipbreaker improve milling performance? The F27 chipbreaker on the SNGX1205ENN-F27 WPP35G promotes controlled chip segmentation, reducing entanglement and improving surface consistency during steel milling. Is the insert suitable for heavy-duty machining? The square 90° form and 0° negative relief give a robust cutting edge and good stability, making the insert suitable for demanding milling tasks where edge strength is required. How does the Tiger·tec Gold series influence tool life? Tiger·tec Gold provides enhanced wear resistance and thermal stability; in the WPP35G composition this results in steadier wear rates and fewer interruptions for tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX1205ENN-F57 WKK25G WKK25G Wendeplatten - Walter Tools
Benefit from robust productivity and consistent chip control thanks to Walter Tools' Tiger·tec Gold coating and the wear-resistant WKK25G grade; ideal for abrasive cast-iron applications and short-chip breaking with the F57 geometry. Order the milling insert directly via Metav Werkzeuge or ask the consultants if technical advice is needed. SNGX1205ENN-F57 WKK25G milling indexable insert for cast iron, square 90° – Walter Tools The SNGX1205ENN-F57 WKK25G is a square 90° milling insert engineered for productive machining of cast iron, combining Walter Tools' Tiger·tec Gold coating with an F57 chipbreaker for reliable short-chip formation in interrupted and continuous cuts. Tiger·tec Gold coating for long life Optimised for cast iron (K) Square 90° insert, negative 0° F57 chipbreaker for short, controlled chips Maximise process stability and tool life with advanced coating technology The combination of the Tiger·tec Gold coating and the WKK25G grade delivers measurable advantages in abrasive environments typical for cast-iron machining. The coating reduces flank and crater wear under thermal and mechanical load, which leads to improved tool life and fewer insert changes. For production-oriented shops, the result is a more consistent cycle time and reduced tool-handling overhead. The hardened, coated carbide substrate ensures stable cutting edges even under the short, brittle chips that are characteristic of cast components. Precision chip control and consistent results for cast-iron operations The F57 chipbreaker geometry was developed to create short, easily evacuated chips in both interrupted and continuous milling. This insert form supports reliable chip flow and helps to maintain surface quality during roughing and semi-finishing passes. The square 90° shape with a negative 0° relief offers robust edge support, which is beneficial when facing varying cutting conditions or interrupted cuts. As a consequence, process reliability increases and rework is minimised, supporting tighter production schedules. Practical advantages for production and tool management Using this indexable insert reduces setup complexity and supports repeatable performance across batches. The insert’s design is suitable for a wide range of cast-iron grades, addressing abrasive wear and frequent chip breakage typical for these materials. Where predictable tool life and consistent results are priorities, the coated grade and geometry contribute to lower overall machining costs through fewer insert changes and stable surface finish. For further clarification on recommended cutting data or toolholder compatibility, Metav Werkzeuge’s consultants can supply tailored guidance based on the specific casting grade and machine tool dynamics. For reliable cast-iron milling with proven Tiger·tec Gold performance, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNGX1205ENN-F57-WKK25G-WALTER Article designation: SNGX1205ENN-F57 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKK25G Chipbreaker: F57 Numbers / Core technical data Insert size: 12 Thickness code: 05 Relief: 0° (negative) Shape: Square 90° Tolerance class: G Special features / Versions Coating technology: Tiger·tec Gold Coated carbide grade: WKK25G Suitable for: cast iron (K) Geometry: robust edge for interrupted cuts Execution: X FAQ What materials is this insert intended for? This insert is intended primarily for cast iron machining; the WKK25G grade and Tiger·tec Gold coating are optimised for abrasive wear and short-chip behaviour common to cast materials. Which chipbreaker does the insert use and what is its benefit? The insert features the F57 chipbreaker, which produces short, controlled chips to aid evacuation and improve surface quality in both interrupted and continuous milling. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating reduces wear and stabilises the cutting edge under mixed thermal and mechanical loads, resulting in longer tool life and fewer insert changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX1205ENN-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for consistent chip control and extended tool life; the square 90° geometry with a negative 0° rake ensures robust corner strength and reliable shoulder milling. Order the insert directly via Metav Werkzeuge or request advice from the consultants for application‑specific recommendations. SNGX1205ENN-F57 WKP25S — square 90° indexable milling insert, Tiger‑tec Silver by Walter Tools The SNGX1205ENN-F57 WKP25S is a square 90° indexable milling insert engineered for productive machining of steel and cast iron, combining a coated‑carbide grade with a dedicated chipbreaker for controlled chip formation. Tiger‑tec Silver coating for long tool life Suitable for steel and cast iron (P / K) Square 90° geometry, negative 0° rake F57 chipbreaker for controlled chip formation High productivity through optimised coating and grade The combination of the Tiger‑tec Silver series with the WKP25S grade provides a balance between wear resistance and thermal stability, which translates into predictable tool life in series production. The grade is a coated carbide designed specifically for the machining behaviour of steel (group P) and cast iron (group K) according to ISO classifications; this means the chemistry and coating structure support the typical heat generation and abrasive wear encountered in these materials. As a consequence, process windows become wider and machining parameters can be pushed without sacrificing edge security, leading to higher material removal rates and fewer insert changes. Geometry that delivers repeatable dimensional accuracy The insert’s square 90° form and negative 0° rake create a robust cutting edge that resists chipping during shoulder milling and heavy cuts. The geometry yields a reliable bearing at the corner, improving stability when plunging or performing stepover passes. In practice, the negative rake orientation reduces the impact on the cutting edge under heavy radial loads, which supports repeatable surface finish and dimensional control across workpieces. For workshops seeking a dependable economy solution, this geometry reduces the frequency of unplanned tool changes and contributes to steadier cycle times. Controlled chip formation for safer machining cycles Equipped with the F57 chipbreaker, the insert promotes short, controllable chips for a variety of chip shapes typical when machining steels and irons. Effective chip control lowers the risk of entanglement and reduces manual intervention for chip clearing, which supports uninterrupted operation on automated or semi‑automated machines. The chipbreaker design also helps to direct heat away from the cutting edge, which preserves edge integrity and supports longer edge life—an important factor for predictable tool consumption and lower unit costs per component. Suitable applications and efficiency gains This insert suits production and job‑shop environments devoted to shoulder milling, light ramping and trochoidal operations in steel and cast iron components. The combination of grade and chipbreaker supports a wide range of cutting conditions, making the insert a versatile choice for mixed production runs where tool inventory rationalisation is desirable. The result is a pragmatic improvement in process security and an economic benefit through reduced downtime and improved first‑pass yields. Contact Metav Werkzeuge for a tailored machining recommendation and order support for the Walter Tools SNGX1205ENN-F57 WKP25S insert (Tiger‑tec Silver); email info@metav-werkzeuge.com or call +49 2822 7131930 for consultant guidance Technical data SKU: SNGX1205ENN-F57-WKP25S-WALTER Product type: Fräswendeschneidplatte Designation: SNGX1205ENN-F57 WKP25S Brand: Walter Tools Facts Size: 12 mm Thickness code: 05 Rake angle: 0° (negative) Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Material application: Steel (P), Cast iron (K) Chipbreaker: F57 Insert shape: Square 90° Execution: X FAQ What workpiece materials is this insert designed for? The SNGX1205ENN‑F57 WKP25S insert is designed primarily for steel (P) and cast iron (K); the WKP25S grade and Tiger‑tec Silver coating are optimised for the thermal and abrasive conditions typical of those groups. Which machining tasks suit the square 90° geometry best? Square 90° inserts such as the SNGX1205ENN‑F57 are ideal for shoulder milling, face milling and operations requiring strong corner support; the negative 0° rake improves edge durability under heavy radial loads. How does the F57 chipbreaker improve process reliability? The F57 chipbreaker promotes short, consistent chips, aiding chip evacuation and reducing the risk of long, tangled chips; this improves cycle stability and reduces manual chip management. Is the WKP25S grade a coated carbide? Yes, WKP25S is a coated carbide grade within the Tiger‑tec Silver family, offering a balance of wear resistance and toughness for general steel and cast‑iron applications. Can the insert be used for continuous production runs? The combination of Tiger‑tec Silver coating and the WKP25S grade is intended to provide process security and consistent tool life, making the insert suitable for continuous or high‑volume production where predictable performance is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original factory‑new product of the manufacturer.
SNGX1205ENN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the WKP35G grade and Tiger·tec Gold technology combined with a robust square 90° geometry for consistent milling results and reduced tool changes; order directly via Metav Werkzeuge or ask our technical consultants for application support. SNGX1205ENN-F57 WKP35G — Indexable milling insert, Tiger·tec Gold for steel and cast iron — Walter Tools SNGX1205ENN-F57 WKP35G is an indexable milling insert designed for reliable material removal in steel and cast iron applications, featuring a square 90° form and a coated carbide grade optimised for stable chip control. *Tiger·tec Gold coated carbide grade WKP35G *Square 90° insert for robust milling *Suitable for steel and cast iron machining *Negative 0° rake for stable cutting Consistent performance through a specialised grade and coating The WKP35G grade, part of the Tiger·tec Gold family, is a coated carbide solution developed for demanding turning and milling applications in steel and cast iron. The combination of a wear-resistant coating and the grade’s substrate provides improved resistance to abrasive and adhesive wear, which translates into longer tool life and fewer interruptions for tool changes. For production environments this means higher uptime and more predictable batch throughput, while the coated surface also helps maintain cutting-edge integrity under thermal load. Geometry that supports stability and process reliability A square 90° insert geometry delivers rigidity and simple orientation for shoulder and side milling where a controlled cutting edge is essential. The insert’s negative 0° rake provides a blunt cutting angle that improves cutting-edge strength and reduces edge chipping when machining interrupted cuts or tougher cast iron grades. The design favours repeatable results and reduces the risk of unexpected edge failure, supporting consistent surface finish and dimensional accuracy across workpieces. Practical application guidance and efficiency gains This insert is supplied in the designation SNGX1205ENN-F57 WKP35G and includes a dedicated chipbreaker F57, optimised for the chip forms encountered when machining P (steel) and K (cast iron) workpieces. The chip control features reduce manual chip management and help maintain stable cutting conditions, which can lower cycle times and save on post-process cleaning. Where harder process conditions occur, the coated grade helps preserve the cutting edge, enabling longer machining intervals and a better cost-per-component metric for series production. Integration into existing tooling systems and handling The insert’s size code and thickness code suit standard milling toolholders designed for square 90° inserts, enabling straightforward integration into established toolsets. The execution designation X indicates the specific insert face and chipbreaker configuration; users can expect simple indexing and repeatable seating in the toolholder. For operators transitioning from uncoated grades, the Tiger·tec Gold coating typically yields noticeable improvements in wear behaviour without changing core machining parameters drastically, although minor adjustments to feeds and speeds can further extend performance. Discuss application requirements with Metav Werkzeuge and request tailored machining recommendations or a cutting-data sheet by contacting our technical team at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav Werkzeuge will advise on the best setup for specific materials and operations Technical data Article number: SNGX1205ENN-F57-WKP35G-WALTER Name: Fräswendeschneidplatte SNGX1205ENN-F57 WKP35G Manufacturer: Walter Tools Core data Geometry: Square 90° Size: 12 Thickness code: 05 Free angle: 0° Tolerance class: G Chipbreaker: F57 Special features Series: Tiger·tec Gold Grade: WKP35G Material suitability: P / K (Steel / Cast iron) Execution: X Insert form: Quadrat 90° Coated carbide (described in series data) FAQ Which materials can be machined with this insert? The SNGX1205ENN-F57 WKP35G insert is designed for machining steel (P) and cast iron (K) according to the grade’s application groups. What benefit does the Tiger·tec Gold grade provide? Tiger·tec Gold-grade WKP35G offers a coated carbide substrate that improves wear resistance and cutting-edge stability for prolonged performance in demanding machining of steel and cast iron. Is the insert suitable for interrupted cuts and heavy milling? Yes, the square 90° geometry combined with the negative 0° rake enhances edge strength, making the SNGX1205ENN-F57 WKP35G appropriate for interrupted cuts and robust milling tasks. How does the chipbreaker F57 affect machining? The F57 chipbreaker promotes predictable chip forms for steel and cast iron, supporting efficient chip evacuation and helping to maintain stable cutting conditions during uninterrupted production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX1205ENN-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Combine high wear resistance, stable chip formation and reliable edge life for efficient Stahl machining; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNGX1205ENN-F57 WPP35G – Milling indexable insert, Tiger·tec Gold, for Stahl (square 90°) – Walter Tools The SNGX1205ENN-F57 WPP35G is a square 90° milling indexable insert engineered for productive machining of Stahl, offering a robust negative clearance and a dedicated chipbreaker for consistent chip control in demanding roughing and finishing tasks. Tiger·tec Gold coating for long tool life Square 90° geometry for stable milling Optimised chipbreaker F57 for reliable chips Productivity gains through a coating designed for long life The Tiger·tec Gold coating combined with the WPP35G grade provides noticeably improved wear resistance compared with conventional coatings. This combination reduces flank and crater wear during extended cycles and supports fewer tool changes, which in turn increases throughput in series production. The insert’s coated carbide substrate stabilises the cutting edge under the thermal and mechanical loads typical for machining Stahl (ISO group P), translating technical properties into measurable productivity advantages on the shop floor. Predictable chip control and process security for robust milling Thanks to the F57 chipbreaker and the square 90° form, the insert delivers controlled chip formation during heavy engagement and interrupted cuts. The chipbreaker geometry is conceived to produce short, manageable chips when machining Stahl, lowering the risk of re-cutting and improving surface quality. The negative clearance of 0° (negative) enhances edge strength, making this insert particularly suited to operations where stability and repeatability are paramount. Versatile geometry for shoulder and face milling with reliable edge life The square 90° shape and 12 mm size offer a stable mounting platform for shoulder and face milling applications, allowing consistent axial and radial engagement. The insert thickness 05 and tolerance class G ensure dimensional repeatability and compatibility with standard cutter pockets. These geometric choices favour long-term stability and predictable tool performance, helping to reduce set-up variability and support higher overall equipment effectiveness in both roughing and semi-finishing operations. Contact Metav Werkzeuge for tailored tooling recommendations on Walter Tools Tiger·tec Gold inserts and to discuss the SNGX1205ENN-F57 WPP35G for your Stahl applications – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNGX1205ENN-F57-WPP35G-WALTER Designation: SNGX1205ENN-F57 WPP35G Product type: Milling indexable insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Facts Size: 12 Thickness: 05 Clearance: 0° (negative) Form: Square 90° Tolerance class: G Special features Series: Tiger·tec Gold Grade: WPP35G Substrate: Coated carbide Chipbreaker: F57 Application: Suitable for Stahl (ISO group P) Execution: X FAQ What materials is this insert recommended for? The SNGX1205ENN-F57 WPP35G insert is optimised for machining Stahl (ISO group P); the Tiger·tec Gold coating and the WPP35G grade are tuned to handle the heat and chip formation typical of steel. Which operations suit the SNGX1205ENN-F57 WPP35G best? This square 90° insert from Walter Tools is suitable for shoulder milling and face milling where a robust cutting edge and stable clamping are required; the negative 0° clearance and F57 chipbreaker support heavy and interrupted cuts. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WPP35G grade increases wear resistance and edge stability, extending cutting life and improving process reliability for repeated Stahl machining cycles. Is the chip control sufficient for automated production cells? Yes, the F57 chipbreaker on the SNGX1205ENN-F57 WPP35G is designed for predictable, short chips during Stahl machining, reducing the risk of entanglement and supporting automated environments. What tolerance and dimensions can be expected from this insert? The insert is supplied in tolerance class G with a 12 size and thickness 05, offering dimensional consistency for standard cutter pockets and repeatable clamping performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNGX1205ENN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust F57 chipbreaker and a square 90° geometry for reliable machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult their advisors for machining parameters and holder compatibility. SNGX1205ENN-F57 WSM35G — Indexable milling insert, square 90°, 0° negative (Walter Tools) SNGX1205ENN-F57 WSM35G is an indexable milling insert engineered for demanding material classes and high process stability Tiger·tec Gold coating for extended tool life Optimised F57 chipbreaker for reliable chip control Square 90° form, 0° negative rake Suitable for stainless steels and superalloys High‑temperature stability for challenging alloys The WSM35G grade, produced within the Tiger·tec Gold series, is a coated carbide formulation developed for the thermal and mechanical stresses of machining stainless steels and heat‑resistant superalloys. The specialised coating enhances resistance to flank wear and reduces tendency for built‑up edge, which directly translates into longer tool life and fewer indexings per production run. For shops facing frequent interruptions from unstable chips or rapid edge wear, this grade offers a measurable improvement in process reliability and predictable component quality. Robust geometry that improves surface consistency A square 90° insert with a 0° negative rake increases cutting edge strength and reduces the risk of chipping under heavy engagement. The F57 chipbreaker is tuned for controlled chip formation when cutting ductile, tough materials, lowering the chance of long, tangled swarf and helping to maintain a consistent cutting force. Together, these design choices provide stable engagement, leading to consistent surface finish and repeatable dimensional results in serial milling operations. Practical advantages that raise shop productivity Indexable inserts like this one reduce downtime compared with solid cutters because worn edges are simply indexed or replaced. The combination of a durable grade and an efficient chipbreaker enhances cycle time stability and decreases intervention frequency, which supports higher overall equipment effectiveness. Specification clarity — from geometry to tolerance class G — simplifies tool selection and inventory management in multi‑machine environments where process standardisation is essential for predictable output. Clear material suitability and application focus This insert is intended primarily for the ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), where thermal loads and edge stability are the dominant concerns. Understanding these material categories helps in choosing the correct cutting speeds and feeds: a heat‑resistant coated grade plus robust geometry reduces edge breakdown and supports secure chip formation, which is especially valuable when machining parts with variable cross‑sections or interrupted cuts. Contact Metav Werkzeuge for tailored cutting data and holder compatibility for Walter Tools Tiger·tec Gold inserts — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: SNGX1205ENN-F57-WSM35G-WALTER Product type: Indexable milling insert (milling insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Item designation: SNGX1205ENN-F57 WSM35G Facts Insert size: 12 mm Thickness code: 05 (code 05) Insert form: Square 90° Relief angle: 0° (negative) Chipbreaker: F57 Tolerance class: G Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: stainless steels (M) and superalloys/titanium (S) Designation: SNGX1205ENN-F57 (square, 90°) Application focus: demanding materials, secure chip formation, robust edge stability FAQ What materials is this insert best suited for? This insert (SNGX1205ENN‑F57 WSM35G by Walter Tools) is designed for stainless steels and heat‑resistant superalloys/titanium, corresponding to ISO groups M and S. How does the F57 chipbreaker help in production? The F57 chipbreaker promotes controlled chip formation during milling, reducing long, entangling chips and supporting consistent cutting forces and surface quality when using the WSM35G grade. What is the effect of the 0° negative rake on cutting performance? A 0° negative rake increases cutting edge strength and resistance to chipping, improving reliability in interrupted cuts and heavy engagement typical for tough materials. Can the insert be used in high‑speed applications? The combination of Tiger·tec Gold coating and the WSM35G formulation is optimised for thermal stability and edge life; cutting parameters should be set according to machine capability and workpiece material for best results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The item offered is original, factory‑new merchandise of the manufacturer.
SNGX1205ENN-F57 WSP45G Wendeplatten - Walter Tools
Combine the robustness of the WSP45G grade with the Tiger‑tec Gold technology and a square 90° form to achieve reliable, high‑productivity milling across steel, stainless steel and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or ask the Metav team for application advice. SNGX1205ENN-F57 WSP45G — Milling insert, Tiger‑tec Gold, square 90°, Walter Tools The SNGX1205ENN-F57 WSP45G is a coated carbide milling insert engineered for demanding milling tasks, offering a versatile grade for steel, stainless steel and high‑temperature alloys in general milling applications Tiger‑tec Gold PVD grade WSP45G Square 90° insert for robust milling Suited for steel, stainless and superalloys Chipbreaker F57 for controlled chip flow Consistent productivity through Tiger‑tec Gold technology The Tiger‑tec Gold PVD coating combined with the WSP45G grade delivers a balance of wear resistance and edge stability that translates directly into longer tool life and fewer indexings. For production environments where cycle time and uptime matter, this combination reduces tool change frequency and supports higher process efficiency. The coated carbide substrate is designed to tolerate the typical heat and abrasion encountered in milling, so the direct benefit is fewer interruptions and steady throughput. One grade for multiple material groups — less tool juggling The insert’s suitability for the ISO groups P, M and S means it can be used across a wide material range: common steel, stainless steel and heat‑resistant superalloys/titanium. Employing a single insert family for these groups simplifies inventory and reduces set‑up changes. For operations that switch between workpieces, this versatility helps to maintain consistent surface quality and process reliability without frequent tool swaps. Geometry and chip control that stabilise the cut The square 90° form and 0° (negative) rake create a robust cutting edge that resists chipping during interrupted cuts or heavy engagement. The F57 chipbreaker is tuned for controlled chip formation and evacuation, which improves surface finish and reduces recutting of chips. The insert’s specified size and thickness ensure secure clamping in standard indexable toolholders, contributing to repeatable accuracy and economical roughing passes where edge integrity is essential. Application guidance to maximise performance For best results, pair the insert with a suitably rigid holder and ensure correct seat contact to preserve the cutting edge and tolerance class during operation. Use coolant or appropriate cutting fluids when machining stainless steel or superalloys to assist in heat control and chip evacuation. The grade’s balanced properties favour both roughing and semi‑finishing cuts; modest increases in feed per tooth often yield improved material removal rates without compromising tool life. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts and receive tailored recommendations for clamping, parameters and application strategies Technical Data Article number: SNGX1205ENN-F57-WSP45G-WALTER Label: Fräswendeschneidplatte SNGX1205ENN-F57 WSP45G Walter Tools Manufacturer: Walter Tools Facts Size: 12 Thickness: 05 Rake angle: 0° (negativ) Shape: Quadrat 90° Tolerance class: G Special features Grade: WSP45G Series: Tiger‑tec Gold Material suitability: P / M / S Chipbreaker: F57 Execution: X Product type: Milling insert FAQ What materials can be machined with this insert? The SNGX1205ENN-F57 WSP45G insert is specified for ISO groups P, M and S, making it suitable for steel, stainless steel and heat‑resistant superalloys including titanium. How does the F57 chipbreaker affect milling performance? The F57 chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of chip recutting when milling with the SNGX1205ENN-F57 WSP45G. Is the insert suited to interrupted cuts or heavy roughing? Yes — the square 90° geometry together with a 0° (negative) rake provides a robust cutting edge suited to interrupted cuts and heavy engagement scenarios. Which series and coating technology does the grade belong to? The WSP45G grade belongs to the Tiger‑tec Gold series; the coating provides a wear‑resistant surface designed for versatile milling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The listed article is an original, factory‑new product of the manufacturer.
SNGX1205ENN-F67 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of efficient chip control, a sharp uncoated carbide grade and a square 90° geometry for consistent milling of non‑ferrous components; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SNGX1205ENN-F67 WAK15 — Milling indexable insert, square 90°, WAK15, Walter Tools The SNGX1205ENN-F67 WAK15 is a square 90° indexable milling insert optimised for high‑performance machining of aluminium and other non‑ferrous metals in the Walter N‑series. Uncoated carbide grade WAK15 for non‑ferrous metals Square 90° geometry for stable edge engagement Precise chip control with F67 chipbreaker Reliable throughput when machining aluminium and non‑ferrous alloys The insert’s WAK15 composition, an uncoated carbide grade, has been selected for applications involving aluminium and similar non‑ferrous materials, where a sharp cutting edge and low adhesion are essential. This grade delivers clean shearing action and reduces the tendency for built‑up edge, which in turn maintains surface finish and batch consistency. For production environments that prioritise repeatability, the combination of material and geometry supports stable cutting forces and predictable tool life, helping to reduce downtime and rework. Geometry and edge technology that support process security A square 90° shape provides conservative engagement angles and even load distribution on each corner, while the 0° (negative) free angle offers robust support for the cutting edge under interrupted cuts or heavier engagement. The integrated F67 chipbreaker is designed to promote reliable chip control, enabling safe evacuation of chips and minimising the risk of entanglement or surface marks. These characteristics make the insert a practical choice for both finishing and productive semi‑finishing operations on non‑ferrous components. Practical benefits for workshop and production planning Being part of the Walter N‑series, this indexable insert joins a system that simplifies tooling choices and inventory management. The defined tolerance class G and standardised square form allow predictable tool offsets and straightforward programming for CNC operations. For process engineers evaluating tool performance, the combination of a dedicated non‑ferrous grade and proven chip management means fewer trial cycles and faster ramp‑up to series production, supporting shorter lead times and improved overall equipment effectiveness. For availability, batch supply or technical matching of Walter Tools inserts such as the SNGX1205ENN-F67 WAK15, contact Metav Werkzeuge for immediate assistance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: SNGX1205ENN-F67-WAK15-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 Facts Insert size: 12 Thickness code: 05 Shape: Quadrate 90° Free angle: 0° (negative) Chipbreaker: F67 Tolerance class: G Special features Material code: N (non‑ferrous metals) Application: Aluminium and NE‑metals Uncoated carbide grade for low adhesion Robust edge support for interrupted cuts Part of a series for simplified tool management FAQ What materials is this insert suitable for? The SNGX1205ENN-F67 WAK15 insert is intended for aluminium and other non‑ferrous metals; the WAK15 grade and chipbreaker geometry are tuned for those material groups. How does the F67 chipbreaker benefit production? The F67 chipbreaker on this milling insert improves chip control, reducing the risk of chip re‑welding and surface damage during machining of non‑ferrous components. Is the geometry suitable for heavy or interrupted cuts? Yes; the square 90° form combined with a 0° (negative) free angle provides strong edge support, making the insert appropriate for interrupted and modestly heavy engagements. Can this insert be used in automated tool systems? The insert’s standardised form and tolerance class G enable predictable positioning and compatibility with common indexable milling holders used in automated CNC setups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) headquartered in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
SNGX1205ENN-F67 WKP25S Wendeplatten - Walter Tools
Take advantage of a robust combination of Tiger·tec Silver wear resistance and the WKP25S grade for reliable machining of steel and cast iron; the square 90° geometry with the F67 chipbreaker delivers consistent chip control and corner strength for productive milling. Order the insert directly via Metav Werkzeuge or consult the technical team for selection support. SNGX1205ENN-F67 SNGX1205ENN-F67 WKP25S – Milling indexable insert, for steel and cast iron | Walter Tools SNGX1205ENN-F67 WKP25S is a square, negative-rake milling insert designed for heavy-duty and general-purpose milling of steel and cast iron components, combining a coated carbide grade with a chipbreaker tuned for controlled chip formation. Tiger·tec Silver for high wear resistance WKP25S grade for steel and cast iron Square 90° insert for robust corner strength F67 chipbreaker for controlled chip formation Longer tool life through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP25S carbide grade targets extended tool life and stable cutting when machining demanding materials. The coating reduces abrasive wear and improves heat resistance, which maintains cutting edge integrity over longer cycles and reduces the frequency of index changes. For production environments where uptime and predictable performance matter, this translates into fewer tool changes and a steadier manufacturing throughput. The emphasis is on measurable productivity improvements rather than abstract claims. Consistent chip control for improved surface quality The engineered F67 chipbreaker supports reliable evacuation and predictable chip shapes when cutting both steel and cast iron, directly contributing to a consistent surface finish. Stable chips reduce the risk of recutting and protect both the workpiece and the toolholder from irregular forces. This geometry is particularly useful in interrupted cuts and mixed-material batches where chip behaviour can otherwise vary widely. The result is fewer reworks and more parts meeting dimensional and visual tolerances first time. Robust geometry that reduces edge damage and downtime A square 90° format provides strong corner support and a favourable edge profile for penetrating cuts and versatile toolpaths. The insert’s negative relief angle increases security under heavy radial or axial loads, making it suitable for operations that stress the cutting edge. Robust corner strength decreases the likelihood of chipping in tough conditions, which in turn reduces unscheduled stops for tool replacement and helps maintain consistent cycle times in serial and batch production. Clear applicability and easy integration into existing toolchains Marked for material groups P and K, the insert is appropriate for a broad range of steels and cast irons commonly encountered in workshops and production facilities. The designation aligns with ISO material coding to ease process planning and cutting data selection. Integration into existing toolholders is straightforward due to the standard square form factor and industry-compatible geometry, allowing process engineers to adopt the insert without complex fixture changes while benefiting from improved wear resistance and chip control. For tailored selection, delivery options and technical advice on Walter Tools inserts such as the WKP25S grade, contact Metav Werkzeuge for prompt, application-focused support and availability. Technical Data Article number: SNGX1205ENN-F67-WKP25S-WALTER Product type: Milling indexable insert Brand: Walter Tools Facts Plate size: 12 Plate thickness: 05 Relief angle: 0° (negativ) Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP25S Material: P / K Plate form: Quadrat 90° Chipbreaker: F67 Execution: X Bezeichnung ohne Sorte: SNGX1205ENN-F67 FAQ Which materials is this insert suitable for? The SNGX1205ENN-F67 WKP25S is specified for steel (P) and cast iron (K) applications, reflecting its coated carbide grade and chipbreaker design. What advantage does the Tiger·tec Silver series provide? Tiger·tec Silver delivers improved wear resistance and thermal stability, helping the insert maintain edge integrity under extended cutting conditions. How does the F67 chipbreaker affect machining? The F67 chipbreaker creates reliable chip forms and supports controlled evacuation, which enhances surface consistency and reduces the chance of recutting. Is the insert suitable for heavy interrupted cuts? The square 90° geometry combined with a negative relief angle offers strong corner support and good resistance to chipping in demanding interrupted cuts. How should the insert be specified for procurement? Order using the SKU SNGX1205ENN-F67-WKP25S-WALTER and reference the WKP25S grade and Tiger·tec Silver series for matching cutting data. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Brand names and registered marks are used solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
SNGX1205ENN-F67 WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP35G carbide grade for stable cutting performance and extended tool life; order the SNGX1205ENN-F67 WPP35G directly via Metav Werkzeuge or ask the consultants for application advice. SNGX1205ENN-F67 WPP35G milling indexable insert for steel – Tiger·tec Gold by Walter Tools A SNGX1205ENN-F67 WPP35G is a square 90° milling indexable insert designed for productive steel machining, combining a coated carbide grade with a dedicated chipbreaker for controlled chip formation Tiger·tec Gold coating for extended tool life WPP35G coated carbide optimised for steel Square 90° geometry for shoulder milling Chipbreaker F67 for reliable chip control Increase throughput with a coating-built carbide The combination of Tiger·tec Gold technology and the WPP35G coated carbide provides a balance of wear resistance and toughness that supports higher cutting parameters in steel machining. As a result, the insert reduces the risk of premature wear and flank damage, which translates into longer tool life and fewer tool changes. This grade is engineered for the thermal and chip-formation characteristics of steels, making it suitable for a wide range of applications where stable, repeatable cutting performance is required. The construction as an indexable insert allows quick replacement and consistent geometry across production runs. Stable cutting and predictable surface quality The chipbreaker F67 is designed to produce short, consistent chips when machining steel, improving evacuation in both slotting and shoulder milling operations. The square 90° format provides a rigid cutting edge for shoulder work and offers multiple effective cutting corners per insert. With a negative 0° rake the insert delivers a robust cutting geometry that improves process reliability under interrupted cuts and heavy engagement conditions. Tolerance class G ensures dimensional consistency, which supports predictable setup and repeatable component tolerances in serial production. Practical handling and application benefits Size designations such as the 12 series and thickness 05 indicate compatibility with tooling systems that accept the SNGX1205 family, facilitating straightforward integration into existing cutter bodies. The coated WPP35G grade focuses on machining steels (material group P) and is developed to balance productivity with surface finish demands, reducing rework and boosting overall efficiency. For operators and toolroom planners, this insert offers a pragmatic route to optimise cycle times while maintaining robust edge life and consistent part quality; the stock-keeping unit and ISO designation simplify ordering and tool management. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and how the SNGX1205ENN-F67 WPP35G can optimise steel milling productivity; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNGX1205ENN-F67-WPP35G-WALTER Label: Fräswendeschneidplatte SNGX1205ENN-F67 WPP35G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Grade: WPP35G Facts Insert size: 12 Thickness: 05 Geometry: Square 90° Rake angle: 0° (negative) Chipbreaker: F67 Tolerance class: G Special features Coated carbide grade (Tiger·tec Gold) Optimised for steel (material group P) Robust negative rake for interrupted cuts Designed for shoulder milling and general milling Consistent chip control for improved process stability FAQ What materials is this insert suitable for? The SNGX1205ENN-F67 WPP35G is formulated for machining steel (material group P) and is optimised for typical steel chip formation and thermal loads. What does the WPP35G grade offer in practice? WPP35G is a coated carbide grade within the Tiger·tec Gold family that combines wear resistance and toughness to extend edge life under higher cutting demands in steel machining. How does the chipbreaker F67 affect machining? The chipbreaker F67 promotes short, controllable chips and supports reliable evacuation, which improves surface quality and reduces the likelihood of chip-related interruptions. Is the insert suitable for heavy interrupted cuts? The square 90° geometry together with the negative 0° rake gives the insert a robust cutting edge, offering increased stability in interrupted and shoulder milling conditions. Which cutter bodies accept this insert designation? The insert follows the SNGX1205 family designation and is compatible with cutter bodies designed to accept SNGX1205ENN-type inserts; the ISO designation simplifies matching with standard toolholders. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX1205ENN-F67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting performance, the Tiger·tec Gold coating and the optimised chipbreaker F67 for reliable machining of demanding materials; order the insert directly via Metav Werkzeuge or ask the consultants for selection support. SNGX1205ENN-F67 WSM35G – Walter Tools indexable milling insert, square 90°, Tiger·tec Gold The SNGX1205ENN-F67 WSM35G is an indexable milling insert engineered for demanding milling of stainless steel and heat‑resistant superalloys, delivering stable chip control and long tool life in heavy and interrupted cuts Tiger·tec Gold coated grade WSM35G Square 90° insert, 12 mm size 0° negative rake for robust cutting Optimised chipbreaker F67 for heavy cuts Increase productivity with more stable cutting and longer tool life The coated carbide grade WSM35G, part of the Tiger·tec Gold series, combines thermal stability and edge strength to extend cutting intervals and reduce tool changes. The combination of the coating and an optimised chipbreaker F67 supports predictable chip formation even under high thermal loads, which translates directly into improved process economy and shorter cycle times. For production environments where component tolerances and throughput matter, this indexable cutting solution offers measurable efficiency gains and fewer unplanned interruptions. Reliable machining of stainless steel and superalloys explained Designed for the ISO material groups S and M, the insert tackles both heat‑resistant superalloys and stainless steel, materials that tend to work‑harden and generate high cutting temperatures. The insert’s 0° negative rake and square 90° geometry provide a robust cutting edge that resists chipping under heavy engagement. The coated substrate of the grade enhances heat resistance and reduces adhesion of workpiece material to the edge, improving surface finish and consistency in serial production runs. Technical terms: a negative rake increases edge stability; the square form gives four usable corners per insert for economical indexing. Practical benefits on the shop floor: fewer tool changes, predictable results Using a specialised grade and dedicated chipbreaker reduces downtime for insert replacement and tool requalification. The insert’s construction supports a stable cutting edge, which decreases variability in tool life and helps maintain repeatable part quality. In mixed‑material shops that face batches of stainless steel and nickel‑based alloys, the insert reduces the need for frequent tool swaps and simplifies tool inventory management. The robust design also tolerates intermittent cuts and interrupted milling typical of moulds, ports and slotting operations. Integration, specification and handling made simple The insert is supplied in the ISO designation format and matches common toolholders for square 90° inserts; tolerance class G and the 05 thickness code are aligned with standard clamping systems. The nominal 12 mm size and the form factor mean easy replacement in existing tool assemblies without rework. Specify the SNGX1205ENN-F67 WSM35G insert for operations that demand a balance between abrasive wear resistance and edge toughness, particularly where thermal loads and adhesion tendencies are high. For tailored advice on integrating the Walter Tools SNGX1205ENN-F67 WSM35G into existing tool stacks, or to request availability and delivery options, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: SNGX1205ENN-F67-WSM35G-WALTER Designation: SNGX1205ENN-F67 Full designation: SNGX1205ENN-F67 WSM35G Facts Size: 12 mm Thickness code: 05 Corner angle: 90° Rake angle: 0° (negative) Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F67 Form: Square Material compatibility: S / M; stainless steel applicable FAQ What materials is this insert suited for? The SNGX1205ENN-F67 WSM35G is designed for machining stainless steel and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and controlled chip formation. How does the chipbreaker F67 improve performance? The chipbreaker F67 promotes predictable chip shapes and evacuation during heavy milling, which helps to protect the cutting edge and maintain a consistent surface finish when using the WSM35G grade. What does the 0° negative rake mean in practice? A 0° negative rake increases edge robustness and reduces the risk of chipping under interrupted cuts; this geometry supports reliable performance in demanding milling operations. How many usable corners does the square insert provide? The square 90° form gives four cutting corners per insert, enabling economical indexing and longer service life for the insert in standard clamping systems. Is this insert compatible with common toolholders? Yes; the geometry, tolerance class G and the 12 mm nominal size align with standard toolholder interfaces for square milling inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
SNGX1205ENN-F67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSP45G carbide grade and the F67 chipbreaker for steady chip control and versatile performance across Stahl, rostfreier Stahl and high-temperature alloys; order directly via Metav Werkzeuge or consult the Metav team for application support. SNGX1205ENN-F67 WSP45G milling insert — square 90° negative-geometry indexable plate by Walter Tools A precision Fräswendeschneidplatte designed for general and demanding milling tasks, offering a Tiger·tec Gold PVD-coated carbide grade for reliable edge stability and efficient material removal. Tiger·tec Gold coating WSP45G Coated carbide, versatile for P/M/S Square 90° insert, negative 0° F67 chipbreaker for stable chip control Reliable productivity through a proven coating and grade The combination of the Tiger·tec Gold technology and the WSP45G grade delivers measurable increases in process stability and edge life. The PVD-coated coated carbide optimises thermal resistance and reduces abrasive wear, which in turn maintains cutting-edge integrity during medium to high cutting loads. For milling operations where consistent tool life and predictable performance matter, this insert supports steady production and fewer tool changes, improving overall throughput and machine uptime. Predictable chip behaviour and secure cutting edge With the F67 chipbreaker and a negative 0° relief geometry, the insert generates consistent chip formation and evacuation even in challenging feed conditions. The built-in chip control reduces the risk of built-up edge and helps prevent chip re-cutting, which benefits both surface finish and tool life. The robust edge preparation of this indexable plate ensures repeatable performance in interrupted cuts and moderate-depth passes, contributing to safer, more efficient machining cycles. Broad material range explained for practical selection This indexable plate is specified for P / M / S applications: P indicates suitability for Stahl (unalloyed and alloyed steels), M indicates suitability for rostfreier Stahl (stainless steels) and S covers high-temperature superalloys and titanium. The WSP45G grade is engineered as a tough, versatile PVD-coated carbide that balances wear resistance with edge stability, making the insert appropriate for mixed-production environments where quick changeovers between materials are common. Practical advantages for workshop and production planning The square 90° format provides four cutting edges per indexable plate, reducing tooling costs per edge and simplifying inventory management. The negative-geometry configuration promotes rigidity in milling fixtures and is forgiving in light to medium engagement depths. When process security and repeatability are priorities, the insert’s combination of geometry, chipbreaker and coating supports predictable cycle times and consistent surface quality. For technical application advice or to specify the correct quantity and holder for this Walter Tools grade, contact Metav Werkzeuge — the Metav consultants will recommend suitable machining parameters and clamping solutions for optimal results. Technical data Article number: SNGX1205ENN-F67-WSP45G-WALTER SKU: SNGX1205ENN-F67-WSP45G-WALTER Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness: 05 Relief angle: 0° (negativ) Tolerance class: G Special features Series: Tiger-tec Gold Grade: WSP45G (PVD-coated carbide) Insert form: Quadrat 90° Chipbreaker: F67 Execution: X Material applicability: P (Stahl) / M (rostfreier Stahl) / S (Superalloys/Titan) FAQ What workpiece materials is this insert suitable for? The SNGX1205ENN-F67 WSP45G insert is specified for P / M / S groups — suitable for Stahl, rostfreier Stahl and high-temperature alloys including superalloys and titanium. How does the Tiger·tec Gold coating benefit cutting performance? Tiger·tec Gold on the WSP45G grade enhances thermal resistance and wear protection for the insert, improving edge life and stability under typical milling loads. Can the square 90° form be indexed several times? Yes, the Quadrat 90° design offers multiple usable edges; the SNGX1205ENN-F67 WSP45G insert can be rotated to present fresh cutting edges, reducing tooling cost per edge. What is the purpose of the F67 chipbreaker? The F67 chipbreaker provides consistent chip formation and evacuation, which supports cleaner machining, reduced risk of built-up edge and improved surface finish when using this Walter Tools insert. Is this insert suitable for interrupted cuts and general-purpose milling? The negative 0° geometry and robust grade make the insert appropriate for interrupted cuts and a wide range of general milling tasks; SNGX1205ENN-F67 WSP45G is designed for stable performance in such conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Walter Tools and the referenced product designations are used for explanation of product compatibility and origin; the offered article is an original factory-new product of the manufacturer.
SNGX1205ZNN-F27 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating combined with the WKP35G grade for extended edge life and reliable chip control in demanding milling operations; order directly via Metav Werkzeuge or consult their technical advisers for tailored application support. SNGX1205ZNN-F27 WKP35G milling indexable insert — Tiger‑tec Gold, Walter Tools The SNGX1205ZNN-F27 WKP35G is a square 90° milling insert engineered for robust general milling of steel and cast iron, offering a balanced compromise between tool life and productivity. Tiger‑tec Gold coating for long tool life WKP35G grade for versatile machining Square 90° insert for stable edge support Optimised chipbreaker F27 for consistent chips Higher throughput with durable coated carbide The combination of the Tiger‑tec Gold coating and the WKP35G grade provides a tangible improvement in wear resistance and process stability. Coated carbide means a hard, wear‑resistant layer over a tough carbide substrate, which reduces flank wear and supports longer cutting intervals; this results in fewer tool changes and more consistent production cycles. Designed for ISO groups P and K, the geometry and material of the insert are tuned for the thermal and mechanical demands of machining steel and cast iron, improving surface quality while maintaining dimensional stability. Consistent chips and stable cutting geometry for safer machining The F27 chipbreaker and square 90° form deliver reliable chip control and secure edge support during interrupted and continuous milling. The negative relief angle of 0° (negative) contributes to robust cutting forces and predictable engagement with the workpiece, which is particularly useful in heavy‑duty passes and roughing operations. Stable chips reduce the risk of recutting and tool chatter, enhancing both operator safety and part quality. The engineered chip pattern also simplifies chip evacuation, supporting higher feed rates without compromising finish. Application efficiency and economic benefits in workshop practice Selecting this indexable insert supports operational flexibility: the insert's size and format suit many standard milling toolholders, allowing quick replacement and minimal downtime. The material suitability (P / K) means fewer distinct tool inventories when working across mixed batches of steel and cast iron, which simplifies tool logistics and reduces overall operating costs. For optimised performance, pair the insert with a matching toolholder and follow manufacturer cutting‑data recommendations; Metav Werkzeuge can advise on feeds, speeds and clamping setups to match specific machines and production goals. Contact Metav Werkzeuge for application advice, availability and tailored recommendations for the Walter Tools Tiger‑tec Gold WKP35G milling insert: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: SNGX1205ZNN-F27-WKP35G-WALTER Designation: SNGX1205ZNN-F27 WKP35G Product type: milling indexable insert Brand: Walter Tools Facts Insert size: 12 Thickness: 05 Shape: Quadrate 90° Relief angle: 0° (negative) Chipbreaker: F27 Grade: WKP35G Series: Tiger‑tec Gold Tolerance class: G Execution: X Special features Coating: Tiger‑tec Gold (coated carbide) Material suitability: P (steel), K (cast iron) Stable chip control for roughing and finishing Robust edge support for interrupted cuts Optimised for productivity and tool life FAQ What materials is the SNGX1205ZNN-F27 WKP35G suitable for? The SNGX1205ZNN-F27 WKP35G milling insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron with optimised performance thanks to the Tiger‑tec Gold coating. How does the Tiger‑tec Gold coating benefit the SNGX1205ZNN-F27 WKP35G? The Tiger‑tec Gold coating on the SNGX1205ZNN-F27 WKP35G reduces abrasive wear and enhances thermal resistance, which extends edge life and supports higher cutting speeds in both roughing and finishing operations. Which chipbreaker should be expected and what advantage does it provide? The insert features the F27 chipbreaker; on the SNGX1205ZNN-F27 WKP35G this chipbreaker promotes consistent chips and improved evacuation, reducing recutting and improving surface finish during milling. Can the SNGX1205ZNN-F27 WKP35G be used for interrupted cuts? Yes, the square 90° form and the negative 0° relief of the SNGX1205ZNN-F27 WKP35G deliver secure edge support that is well suited to interrupted cuts and applications with variable engagement. Is the SNGX1205ZNN-F27 WKP35G compatible with standard holders? The SNGX1205ZNN-F27 WKP35G is a standard format insert (size 12) designed for compatibility with common milling toolholders; verify holder designation to ensure correct seating and clamping. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used solely for explanation. There is no affiliation between our company and the named brands. The offered article is original, factory‑new merchandise from the manufacturer.
SNGX1205ZNN-F27 WPP35G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold coated, WPP35G grade insert for productive steel machining, combining reliable chip control with a robust square 90° geometry; order genuine inserts via Metav Werkzeuge or consult the Metav specialists for application support. SNGX1205ZNN-F27 WPP35G – Milling indexable insert by Walter Tools, Tiger·tec Gold coated, for steel SNGX1205ZNN-F27 WPP35G is a square 90° indexable milling insert designed for industrial steel machining, offering the Tiger·tec Gold coating and a 0° negative rake for stable cutting performance. Tiger·tec Gold coating for extended tool life Optimised F27 chipformer for reliable chip control Square 90° geometry for robust milling performance Designed for machining unalloyed and alloyed steel Productive steel machining through modern coating technology The combination of the Tiger·tec Gold coating and the WPP35G grade provides enhanced resistance to abrasive and adhesive wear, helping to extend tool life in industrial milling. Coated carbide substrates reduce flank wear under the thermal and mechanical loads typical of steel machining (ISO group P), which translates into fewer tool changes and higher uptime. The technological focus on coating adhesion and layer design supports consistent performance across a broad range of unalloyed and alloyed steel grades. Predictable chip control and improved surface finish The integrated F27 chipformer has been engineered for controlled chip formation during interrupted and continuous milling, reducing the risk of built-up edge and improving swarf evacuation. Combined with the 0° negative rake, this geometry stabilises the cutting edge under higher feed rates and tougher cut conditions, which helps to produce a more consistent surface quality on finished components. The result is a reduction in rework and a more predictable process window for production runs. Robust geometry for demanding milling tasks The square 90° shape offers mechanical stability and multiple cutting edges per insert, supporting both roughing and semi-finishing operations where rigidity is essential. The insert’s design focuses on repeatable edge performance, making it suitable for heavy interrupted cuts and operations where tool life and edge security are priorities. Using this insert in a correctly matched toolholder capitalises on its shape to deliver stable cutting forces and long-term repeatability. Application guidance that supports efficiency This indexable insert is optimised for milling of steels and performs well in mixed production environments that demand consistent results. Selection of feeds, speeds and coolant strategy should follow standard recommendations for coated carbide tooling in steel; the coating and chipbreaker combination allow a balance between higher cutting parameters and reliable tool life. For process planning and parameter validation, Metav Werkzeuge can provide application advice to align cutting data with machine and workpiece conditions. Request application support from Metav Werkzeuge for optimal use of Walter Tools Tiger·tec Gold inserts or order genuine SNGX1205ZNN-F27 WPP35G inserts through Metav Werkzeuge for enhanced productivity in steel milling Technical data Article number: SNGX1205ZNN-F27-WPP35G-WALTER Type: Fräswendeschneidplatte Designation: SNGX1205ZNN-F27 WPP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Execution: X Facts Size: 12 Thickness: 05 Tolerance class: G Rake angle: 0° (negativ) Insert shape: Quadrat 90° Chipbreaker: F27 SKU: SNGX1205ZNN-F27-WPP35G-WALTER Special features Material group: P (steel) Coating technology: Tiger·tec Gold Carbide: coated carbide Geometry: square 90°, 0° negative rake Application: milling indexable insert Storytrigger: wendeplatten FAQ What materials is this insert suited for? The SNGX1205ZNN-F27 WPP35G insert is designed primarily for steel (ISO group P), covering unalloyed and alloyed steels as described for the WPP35G grade. How does the F27 chipbreaker affect machining? The F27 chipformer improves chip control and evacuation, leading to more consistent swarf management and better surface finishes when using the insert in appropriate toolholders. Is the insert suitable for heavy interrupted cuts? Yes, the square 90° geometry and the 0° negative rake offer the mechanical stability required for interrupted and demanding milling operations. Which coating provides wear protection on this insert? The insert uses the Tiger·tec Gold coating technology, which enhances resistance to both abrasive and adhesive wear in steel machining. Can Metav Werkzeuge provide cutting data or application advice? Metav Werkzeuge can supply application guidance and support to match cutting parameters to machine and workpiece conditions for optimal use of the SNGX1205ZNN-F27 WPP35G insert. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SNGX1205ZNN-F27-WKP25S-Wendeplatten - Walter Tools
SNGX1205ZNN-F27 WKP25S — Fräswendeschneidplatte für Stahl und Gusseisen | Walter Tools Die SNGX1205ZNN-F27 WKP25S ist eine leistungsstarke Fräswendeschneidplatte der Reihe Tiger-tec Silver, ausgelegt für produktive Metallzerspanung an Stahl und Gusseisen. SNGX1205ZNN-F27 WKP25S von Walter Tools Tiger-tec Silver Beschichtung für verbesserten Verschleißschutz Quadrat 90° Form für stabile Schneidkanten F27 Spanbrecher für kontrollierte Spanbildung Geeignet für Stahl und Gusseisen Robuste Beschichtung für verlängerte Standzeiten Die WKP25S-Beschichtung aus der Tiger-tec Silver Serie kombiniert eine widerstandsfähige Schichttechnik mit optimaler Wärmeableitung. Dadurch reduziert sich abrasiver Verschleiß beim Fräsen von Stahl und Gusseisen, was zu einer spürbar höheren Standzeit führt. Anwender profitieren von weniger Werkzeugwechseln und gleichbleibender Bearbeitungsqualität über längere Schichten. Geometrie und Spanform für stabile Prozesse Die quadratische Plattenform mit 90° kombiniert mit dem F27-Spanbrecher sorgt für kontrollierte, kurzzerspanende Späne und stabile Schnittbedingungen. Der negative Freiwinkel von 0° bietet erhöhte Schneidkantenstabilität bei anspruchsvollen Einschnitten. Diese Geometrie ist besonders geeignet für robuste Schrupp- und Schlichtoperationen, bei denen Prozesssicherheit und Wiederholgenauigkeit im Vordergrund stehen. Passgenaue Anwendung und Zielgruppe Dieses Wendeschneidplatten-Design richtet sich an Fertigungsbetriebe und Lohnfertiger, die Stahl- und Gusswerkstoffe zerspanen und hohen Wert auf konstante Ergebnisse legen. Die Plattenserie eignet sich für anspruchsvolle Produktionsumgebungen, in denen reduzierte Stillstandszeiten und gleichbleibende Oberflächengüte wichtige Kennzahlen sind. Wirtschaftlichkeit durch Prozesssicherheit Durch die Kombination aus verschleißarmer Beschichtung und optimierter Spanbildung sinken Kosten pro gefertigten Bauteil. Die SNGX1205ZNN-F27 WKP25S unterstützt eine produktive Zerspanung mit stabilen Schnittwerten und reduziertem Rüstaufwand. Damit lässt sich die Fertigung effizienter planen und Ausbeute verbessern. Empfehlung: Für zuverlässige Zerspanungsprozesse die WKP25S-Sorte von Walter Tools wählen und bei Bedarf technische Beratung unter info@metav-werkzeuge.com anfragen Produktmerkmale Artikelnummer: SNGX1205ZNN-F27-WKP25S-WALTER Marke: Walter Tools Bezeichnung: SNGX1205ZNN-F27 WKP25S Baureihe: Tiger-tec Silver Ausführung: X Fakten Plattengröße: 12 Plattendicke: 05 Freiwinkel: 0° (negativ) Plattenform: Quadrat 90° Toleranzklasse: G Besonderheiten Spanbrecher: F27 Sorte: WKP25S Beschichtung: Tiger-tec Silver Bearbeitbare Werkstoffe: P (Stahl), K (Gusseisen) ISO-Bezeichnung: SNGX1205ZNN-F27 WKP25S FAQ Was unterscheidet die WKP25S-Sorte von anderen Schneidstoffen? Die WKP25S-Sorte im Tiger-tec Silver-Design bietet eine beschichtete Hartmetallzusammensetzung, die speziell für die Zerspanung von Stahl und Gusseisen optimiert ist. Die Sorte zeichnet sich durch gute Verschleißfestigkeit und stabile Spanbildung aus. Für welche Bearbeitungsaufgaben ist die SNGX1205ZNN-F27 am besten geeignet? Die SNGX1205ZNN-F27 Wendeschneidplatte ist ideal für Schrupp- und Schlichtaufgaben an Stahl und Gusseisen, bei denen stabile Schneidkanten und kontrollierte Spanformer wichtig sind. Wie trägt die Quadratform 90° zur Prozesssicherheit bei? Die Quadratform mit 90° sorgt für mehrere schneidfähige Kanten und hohe Kantenstabilität, wodurch Rüstintervalle verlängert und die Prozesssicherheit in Serienfertigung erhöht werden. Welche Vorteile bringt der F27-Spanbrecher in der Praxis? Der F27-Spanbrecher formt kurzzerspanende Späne, verbessert die Spanabfuhr und verringert das Risiko von Spanverstopfungen, insbesondere bei anspruchsvollen Schnittbedingungen in Stahl und Gusseisen. Kann diese Wendeschneidplatte in bestehenden Werkzeugaufnahmen eingesetzt werden? Die SNGX1205ZNN-F27 WKP25S entspricht gängigen ISO-Bezeichnungen und lässt sich in passende Fräskörper mit quadratischen Plattenaufnahmen integrieren, sofern die Plattengröße und Ausführung kompatibel sind. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNGX1205ZNN-F57 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear protection and a geometry tailored for cast iron to increase productivity and reduce tool consumption; order the insert directly via Metav Werkzeuge or consult our specialists for application support. SNGX1205ZNN-F57 WKK25G milling indexable insert — square 90°, Tiger‑tec Gold, Walter Tools A SNGX1205ZNN-F57 WKK25G milling indexable insert designed for robust, productive machining of cast iron components in industrial milling applications. SNGX1205ZNN-F57 WKK25G by Walter Tools Tiger‑tec Gold coating for abrasion resistance Designed for cast iron machining (ISO K) Square 90° form with 0° negative rake Increased productivity on cast iron workpieces The coated carbide grade WKK25G, combined with Tiger‑tec Gold technology, delivers pronounced abrasion resistance that translates into longer intervals between index changes and less unplanned downtime. For operations focused on cast iron, this indexable insert provides a consistent cutting edge and stable performance under the short, breaking chip behaviour typical of grey and high‑silicon irons. The result is measurable process efficiency: fewer tool changes and predictable production planning. Greater process security through tailored geometry A square 90° form with a 0° negative rake produces a robust cutting edge that resists chipping during heavy or interrupted cuts. The chipbreaker F57 is developed to encourage controlled chip formation in abrasive cast iron materials, reducing the risk of recutting and improving surface regularity. Together, the geometry and chip management lower the likelihood of frequent rework and support stable cycle times in serial milling tasks. Simplified tool handling and consistent results The insert’s standard designation and form ensure compatibility with conventional SNGX‑type tool holders, supporting quick index changes and repeatable seating. Thanks to the coated WKK25G grade, operators benefit from a balance between wear resistance and toughness, which is particularly advantageous when machining brittle or abrasive cast alloys. Clear identification of the insert and coating helps maintenance and tool management processes, contributing to traceable tool life and inventory control. Application guidance and typical uses Optimised for ISO group K (cast iron), the insert is suitable for roughing and semi‑finishing operations where chip breaking and edge stability are critical. The combination of a protective coating and the negative‑rake geometry favours high‑productivity cutting strategies with reduced tool consumption. For new applications or mixed workpiece batches, a short qualification run is recommended to fine‑tune feed and depth parameters in order to exploit the full advantages of the coated grade and chipbreaker design. For professional advice, availability checks or to request an application recommendation for the Walter Tools SNGX1205ZNN-F57 WKK25G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide practical support and immediate delivery information. Technical data Article number: SNGX1205ZNN-F57-WKK25G-WALTER Designation: SNGX1205ZNN-F57 WKK25G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 05 Form: Square 90° Free angle: 0° (negative) Tolerance class: G Chipbreaker: F57 Series: Tiger‑tec Gold Special features Grade: WKK25G (coated carbide) Coating technology: Tiger‑tec Gold Suitable material: cast iron (ISO K) Stable cutting edge for interrupted cuts Developed for abrasive wear and short breaking chips FAQ What materials is this insert suitable for? The SNGX1205ZNN-F57 WKK25G is optimised for cast iron (ISO K); the WKK25G grade and chipbreaker are tuned to the abrasive wear and short, breaking chips typical of these materials. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold increases surface hardness and abrasion resistance, which extends the useful life of the WKK25G inserts and supports consistent performance in demanding milling operations. Does the insert have a negative rake and what is the advantage? Yes — the insert features a 0° negative rake, giving a robust cutting edge that improves resistance to chipping during heavy or interrupted cutting, enhancing process reliability. For which milling operations is the chipbreaker F57 recommended? The F57 chipbreaker is intended to promote controlled chip segmentation in cast iron, making it well suited to roughing and semi‑finishing where chip control is essential. Which toolholders are compatible with this insert designation? The SNGX1205ZNN form is intended for standard SNGX‑style tool bodies with matching seats; the designation ensures straightforward interchange and stable clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are used for explanation only. There is no connection between Metav Werkzeuge and the mentioned brands. The offered item is original factory‑new goods of the manufacturer Walter Tools.
SNGX1205ZNN-F57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP25S grade for stable chip formation and wide material versatility; the square 90° geometry with 0° negative rake ensures dependable milling performance. Order the insert directly via Metav Werkzeuge or consult our specialists for process-oriented selection. SNGX1205ZNN-F57 WKP25S milling indexable insert – Square 90°, for steel & cast iron (Walter Tools) A SNGX1205ZNN-F57 WKP25S milling indexable insert designed for productive face and shoulder milling in steel and cast iron applications, featuring Tiger‑tec Silver coating for extended edge life. Tiger‑tec Silver coating for stable performance WKP25S grade for broad steel and cast iron use Square 90° geometry for versatile milling F57 chipbreaker for controlled chip formation Consistent cutting performance for steel and cast iron The insert combines the WKP25S coated‑carbide grade and the Tiger‑tec Silver series to deliver consistent wear behaviour when machining both steel (ISO group P) and cast iron (ISO group K). The coating and substrate are optimised for the heat and abrasion characteristics typical of these materials, resulting in stable chip formation and extended tool life. For users with mixed production runs, this translates into fewer tool changes and more predictable batch throughput. Geometry that reduces setup and improves process control The Square 90° form and 0° negative rake provide a robust cutting edge suited to shoulder and face milling where axial and radial forces are significant. The compact 12 size and the thickness code 05 contribute to a secure clamping condition, while the F57 chipbreaker promotes controlled breakage of chips during interrupted cuts. Together, these features reduce the need for frequent parameter adjustments and simplify fixture requirements, supporting faster ramp‑up to stable cutting conditions. Designed for repeatable results and high process security With tolerance class G and Walter Tools' quality standards, the insert supports repeatable seating and edge location in indexable toolholders. The grade and coating combination is aimed at high process security: consistent wear patterns mean predictable reconditioning or replacement intervals, fewer scrap parts and improved overall equipment effectiveness. The construction is intended to balance productivity and surface finish without sacrificing tool life. Practical selection and integration notes The insert is supplied in the SNGX1205ZNN-F57 ISO designation and fits standard square milling cutter bodies designed for 90° inserts. The chipbreaker designation F57 is optimised for the stated material groups; for fine finishing or light interrupted cuts, adjust feeds accordingly to maintain chip control. Where specific cutting data is required for a given machine or workpiece condition, the grade and chipbreaker behaviour described here support confident parameter tuning and process validation. Contact Metav Werkzeuge for tailored cutting data and ordering of Walter Tools Tiger‑tec Silver inserts or to discuss the SNGX1205ZNN-F57 WKP25S for specific production needs: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: SNGX1205ZNN-F57-WKP25S-WALTER Article: SNGX1205ZNN-F57 WKP25S Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger‑tec Silver Facts Size: 12 Thickness: 05 Free rake angle: 0° (negative) Plate form: Square 90° Tolerance class: G Special features Grade: WKP25S (coated carbide) Chipbreaker: F57 Material suitability: Steel (P), Cast iron (K) Execution: X ISO designation: SNGX1205ZNN-F57 WKP25S FAQ What materials is this insert suited for? The SNGX1205ZNN-F57 WKP25S insert is specified for steel (ISO group P) and cast iron (ISO group K); the WKP25S grade and Tiger‑tec Silver series are tuned to these workpiece types. Which geometry offers best stability for shoulder milling? The square 90° geometry with 0° negative rake provides robust edge support and stability for shoulder and face milling operations with intermittent engagement. How does the F57 chipbreaker affect machining? The F57 chipbreaker promotes reliable chip control and breakage during typical steel and cast iron milling, improving surface quality and reducing the risk of long chips. Can this insert be used for finishing passes? Yes; while optimised for productive roughing and medium machining, the insert can be applied to finishing with appropriate feed and speed adjustments to achieve the desired surface finish. Is the tolerance class relevant for toolholder interchangeability? Tolerance class G ensures consistent seat dimensions and repeatable positioning in compatible cutter bodies, aiding quick and precise index changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered item is original, factory‑new goods from the manufacturer.
SNGX1205ZNN-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process security and long tool life provided by the Tiger·tec Gold grade WKP35G and the stable square 90° geometry for reliable milling of steel and cast iron. Order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. SNGX1205ZNN-F57 WKP35G milling insert (square 90°, 0° negative) by Walter Tools The SNGX1205ZNN-F57 WKP35G is a square 90° milling insert designed for productive machining of steel and cast iron in general milling applications Tiger·tec Gold coating for long tool life Suitable for steel and cast iron (P/K) Square 90° geometry for robust milling 0° negative rake for stable cutting High productivity through advanced grade and coating The insert combines the WKP35G grade with Tiger·tec Gold coating to extend cutting edge life under typical steel and cast iron workloads. The coated cemented carbide composition is optimised for the heat and chip formation encountered when machining P- and K-class materials, which reduces flank wear and maintains dimensional stability over longer tool paths. This results in fewer index changes and improved machine utilisation, translating into measurable productivity gains on medium- to high-volume milling operations. Stable cutting and predictable chip behaviour The square 90° geometry paired with the chipbreaker F57 delivers consistent chip control for both continuous and interrupted cuts. A 0° negative rake increases insert robustness and minimises edge chipping during heavy engagement or roughing passes; negative rake geometry is therefore advantageous where stability and repeatable performance matter more than minimum cutting forces. Process planners will find the combination useful for slotting, shoulder milling and face milling where controlled chip flow and tool life are priorities. Practical integration for reliable production results With the standard designation SNGX1205ZNN-F57 WKP35G, the insert fits common cutter bodies that accept the SNGX format and size 12 indexable plates, allowing straightforward integration into existing tool assemblies. The execution X and tolerance class G support consistent seating and repeatable positioning, helping to reduce setup-related variation. For complex parts or mixed-material batches, the insert’s balanced design reduces the need for frequent tool changeovers while keeping surface finish and dimensional accuracy within typical production tolerances. For technical queries or application recommendations, Metav Werkzeuge provides direct assistance via eMail: info@metav-werkzeuge.com or by phone: +49 2822 7131930. For high‑productivity milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for ordering and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNGX1205ZNN-F57-WKP35G-WALTER Article designation: SNGX1205ZNN-F57 Full designation: SNGX1205ZNN-F57 WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core data Size: 12 Thickness: 05 Free angle: 0° (negative) Tolerance class: G Plate form: Quadrate 90° Special features Series: Tiger-tec Gold Grade: WKP35G Chipbreaker: F57 Execution: X Material groups: P / K Suitable for: Steel and Cast iron FAQ What materials is this insert suitable for? The SNGX1205ZNN-F57 WKP35G is designed for machining steel (P) and cast iron (K) in accordance with the grade’s intended material coverage. What advantage does the Tiger·tec Gold grade offer? Tiger·tec Gold provides enhanced wear resistance and edge stability for WKP35G, which helps maintain cutting performance and extend indexable plate life under typical milling conditions. How does the 0° negative rake affect machining? A 0° negative rake increases edge strength and reduces the risk of chipping during heavy or interrupted cuts, delivering greater process security in robust milling operations. Is the insert compatible with standard SNGX tool holders? Yes. The designation indicates compatibility with cutter bodies that accept SNGX format plates in the stated size, allowing direct replacement in matching assemblies. What role does the chipbreaker F57 play? The chipbreaker F57 is designed to shape and evacuate chips reliably for a wide range of feeds and depths, improving surface finish and reducing recutting of chips. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names are used for explanation only; there is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer. The Walter AG (brand appearance: Walter Tools) is a recognised provider of precision tools for metalworking and is part of the Sandvik group.
SNGX1205ZNN-F57 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, stable chip control and robust 90° geometry for reliable steel machining and consistent tool life. Order the inserts via Metav Werkzeuge or contact the technical consultants for application advice and availability. SNGX1205ZNN-F57 WPP35G – Square 90° milling indexable insert for steel (Tiger·tec Gold) by Walter Tools The SNGX1205ZNN-F57 WPP35G is a square 90° milling indexable insert engineered for ISO P applications, offering a 0° negative rake and an optimised chipformer F57 for stable chip formation during machining of steel Tiger·tec Gold coating for high wear resistance Optimised chipformer F57 for stable chip control Square 90° geometry with 0° negative rake Increased productivity and process security when machining steel The Tiger·tec Gold grade WPP35G is a coated carbide developed for steel (ISO P) that balances wear resistance and toughness. The combination of a wear-resistant coating and a robust substrate reduces flank wear under continuous operation, enabling consistent tool life and fewer changeovers. For job shops and production lines the result is higher throughput and predictable cycle times, with the insert’s design supporting both stable feeds and reliable cutting at typical machining parameters. Robust geometry for interrupted and heavy cuts The insert’s square 90° geometry and 0° negative rake create a strong cutting edge that resists chipping during interrupted cuts or when machining workpieces with variable cross-sections. The chipformer F57 is tuned to control chip shape and evacuation when cutting steels, which lowers the risk of re-cutting and improves surface integrity. These mechanical benefits translate into fewer rejects and better repeatability in batch production, especially where toughness and edge security are priorities. Coating and grade deliver predictable performance and economy The WPP35G grade, part of the Tiger·tec Gold series, is a coated hardmetal solution designed for a broad spectrum of steel applications. The coating technology promotes thermal stability and reduced abrasive wear, which is particularly advantageous in longer runs or mixed-material lots. By favouring a balanced grade over an extreme-hard or extreme-tough option, this insert provides economical cutting performance: longevity under common conditions while maintaining good surface finish and dimensional control. Contact Metav Werkzeuge for technical application advice, stock information and to discuss the best Walter Tools insert configuration for specific steel machining tasks Technical Data SKU: SNGX1205ZNN-F57-WPP35G-WALTER Designation: SNGX1205ZNN-F57 WPP35G Product type: milling indexable insert Manufacturer: Walter Tools Facts Size: 12 Thickness: 05 Cutting edge angle: 90° Free rake: 0° (negative) Chipformer: F57 Tolerance class: G Special features Grade: WPP35G (coated carbide, Tiger·tec Gold) Suitable for: Steel (ISO P) Geometry: square 90°, 0° negative rake Series: Tiger·tec Gold Sorteneinsatz: classification for wear-resistant to tougher steels (10/20/30/35) FAQ What materials is this insert suited for? The SNGX1205ZNN-F57 WPP35G is specified for steel machining in accordance with ISO P; the grade and chipformer are optimised for typical steel cutting conditions. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold enhances thermal stability and wear resistance, helping the insert maintain performance over longer tool life and reducing downtime due to changes. Is the geometry suitable for interrupted cuts? Yes, the square 90° form with a 0° negative rake provides a robust cutting edge, improving resistance to chipping during interrupted or unstable cutting conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; no connection exists between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
SNGX1205ZNN-F57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the F57 chipbreaker for stable cutting edges and reliable chip control in demanding milling tasks. Order the SNGX1205ZNN‑F57 WSM35G directly via Metav Werkzeuge or consult their specialists for application support. SNGX1205ZNN-F57 WSM35G – Milling indexable insert, Tiger‑tec Gold, Walter Tools A SNGX1205ZNN-F57 WSM35G milling insert engineered for heavy‑duty machining of stainless steels and heat‑resistant superalloys with a square 90° geometry. Tiger‑tec Gold coating for edge stability Suitable for stainless steels and superalloys Square 90° geometry for versatile milling 0° negative rake with F57 chipbreaker Maximised process reliability for difficult‑to‑cut materials The combination of the Tiger‑tec Gold series and the WSM35G grade delivers consistent edge life and improved resistance to thermal and mechanical wear when machining materials that tend to work‑harden. The coated carbide composition reduces the risk of built‑up edge on stainless steels, while the surface treatment supports stable cutting over extended tool life. This results in fewer tool changes, reduced downtime and a more predictable machining process for production environments. Precise chip control and geometry that reduces downtime The insert’s F57 chipbreaker and 0° negative rake geometry are optimised to produce short, controllable chips under the high temperatures typical of superalloy and stainless steel milling. Controlled chip formation reduces the likelihood of rework or surface damage and simplifies chip evacuation. The square 90° form provides flexibility for face and shoulder milling operations, offering two usable cutting edges per corner and straightforward indexation when a fresh edge is required. Clear application guidance and measurable benefits Designed for industrial milling applications, the insert supports machining of ISO groups M (rostfreie Stähle) and S (superalloys and titanium) where thermal stability and edge robustness are critical. The plate’s tolerance class G and standardised ISO designation facilitate repeatable setup and consistent results across batches. Using this insert can lead to higher process throughput and a lower cost per part due to extended edge life and fewer interruptions for tool changes. Contact Metav Werkzeuge for tailored application recommendations and to specify Walter Tools Tiger‑tec Gold inserts for challenging stainless and superalloy milling tasks. Technical Data Article number: SNGX1205ZNN-F57-WSM35G-WALTER Designation: SNGX1205ZNN-F57 WSM35G Manufacturer: Walter Tools Product type: Milling indexable insert Core specifications Insert size: 12 mm Thickness: 5 mm Shape: Square 90° Free rake: 0° (negative) Chipbreaker: F57 Tolerance class: G Materials & features Grade/series: Tiger‑tec Gold; WSM35G Suitable for: Stainless steels (M), Superalloys/Titanium (S) Coating: coated carbide Execution: X ISO designation: SNGX1205ZNN-F57 WSM35G FAQ What materials is this insert intended for? The SNGX1205ZNN‑F57 WSM35G insert is intended for stainless steels (M) and superalloys/titanium (S), where heat resistance and edge stability are required. How does the Tiger‑tec Gold series improve performance? The Tiger‑tec Gold coating enhances thermal resistance and wear behaviour, supporting longer cutting life and more consistent surface finishes when using the Walter Tools milling insert. Which operations benefit most from the square 90° shape? Face and shoulder milling operations benefit from the square 90° geometry, which provides stable cutting engagement and multiple usable edges for indexation. Is the chip formation reliable for high‑temperature milling? Yes; the F57 chipbreaker together with the 0° negative rake promotes short, controllable chips even under elevated cutting temperatures typical of stainless and superalloy machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SNGX1205ZNN-F57 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the versatile WSP45G grade and a square 90° geometry for reliable milling performance and prolonged tool life. Order the SNGX1205ZNN-F57 WSP45G insert directly via Metav Werkzeuge or ask the consultants for application support. SNGX1205ZNN-F57 WSP45G milling indexable insert — Tiger‑tec Gold, square 90°, negative rake (Walter Tools) The SNGX1205ZNN-F57 WSP45G is a square 90° milling insert designed for versatile face and shoulder milling across steel, stainless steel and heat‑resistant superalloys. Tiger‑tec Gold PVD coating Suitable for steel, stainless and superalloys Square 90° geometry with 0° negative rake High process reliability for demanding milling tasks The insert delivers consistent chip control and stable cutting edges thanks to the WSP45G grade and the Tiger‑tec Gold coating. This combination is optimised for the thermal and mechanical stresses encountered when machining steels and rostfreier Stahl (stainless steels), as well as tougher materials where heat builds at the cutting zone. The result is fewer interruptions, predictable wear behaviour and improved part quality — a tangible efficiency advantage on production runs and batch work. Clear advantage through geometry and chipbreaker design A square 90° form with a 0° negative rake provides excellent edge strength and repeatable shoulder milling performance. The F57 chipbreaker is designed to control chips for typical milling feeds and depths, reducing risk of built‑up edge and enabling stable surface finishes. For operations where edge robustness and machining security are priorities, this geometry minimises downtime by keeping the cutting edge intact for longer. Broad material capability reduces tool inventory Grade designation P / M / S indicates suitability for unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys/titanium respectively. One versatile grade that covers multiple ISO material groups reduces the need for frequent insert changes and simplifies tooling logistics. In practical terms, fewer tool holders and fewer insert types are required to cover a wide range of workpiece materials. Practical manufacturing benefits and application notes The coated carbide composition of the insert supports higher cutting speeds while maintaining edge integrity under heavy loads. When used in appropriate cutter bodies and with recommended feeds, the insert contributes to reliable component finish and dimensional repeatability. For process planning, the negative rake and square geometry are particularly effective in shoulder milling and heavy radial engagement cuts where edge stability is essential. Contact Metav Werkzeuge for tailored application advice and to order genuine Walter Tools Tiger‑tec Gold inserts directly from stock. Technical Data Article number: SNGX1205ZNN-F57-WSP45G-WALTER Label: Fräswendeschneidplatte SNGX1205ZNN-F57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade: WSP45G Coating series: Tiger‑tec Gold Numbers / Core technical data Inscribed circle / size: 12 mm Thickness: 5 mm Tolerance class: G Free rake: 0° (negative) Shape angle: Quadrate 90° Chipbreaker: F57 Designs / Special features Coating: Tiger‑tec Gold (PVD) Material suitability: P / M / S (steel, stainless steel, superalloys/titanium) Execution: X Series information: Tiger‑tec Gold series, versatile PVD grade ISO designation: SNGX1205ZNN-F57 WSP45G FAQ What materials can this insert machine effectively? The SNGX1205ZNN-F57 WSP45G insert is specified for P / M / S groups, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys/titanium. What is the purpose of the F57 chipbreaker? The F57 chipbreaker on the insert controls chip formation during typical milling feeds and depths, supporting stable cutting and improved surface finish when using the SNGX1205ZNN-F57 WSP45G. What does the WSP45G designation indicate? WSP45G is Walter Tools’ coated carbide grade within the Tiger‑tec Gold family, designed for toughness and versatile cutting performance in milling applications. Which cutter bodies are compatible with this insert format? The insert fits standard milling cutter bodies accepting the SNGX1205 format; secure clamping and correct seat geometry in the cutter body ensure the expected performance from this insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are mentioned for explanation only and do not imply any affiliation between our company and the manufacturers. The offered article is an original, factory‑new product of the respective manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com