SNMA120416-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high productivity, reliable chip control and long tool life for efficient cast-iron turning; order the insert directly via Metav Werkzeuge or ask our consultants for tailored advice. SNMA120416-RK5 WKK10S – Turning insert, Tiger‑tec Silver, RK5 chipbreaker (Walter Tools) The SNMA120416-RK5 WKK10S is a square turning insert designed for high-performance finishing and medium-duty roughing of cast iron components *Tiger‑tec Silver coating *Optimised for cast iron (ISO K) *RK5 chipbreaker for consistent chips *Square 90° geometry, 1.6 mm corner radius Consistent machining performance for cast iron production The SNMA120416-RK5 WKK10S insert combines the Tiger‑tec Silver coating with the WKK10S carbide grade to address the abrasive wear typical of cast iron machining. The coated cemented-carbide substrate increases resistance to abrasive degradation and thermal damage, which translates into longer cutting edge life and fewer tool changes. For production environments where uptime and predictable tool life matter most, this combination supports steady cycle times and reduced process variance. Reliable chip control and dimensional stability The dedicated RK5 chipbreaker is engineered to produce short, repeatable chips when cutting grey and nodular cast irons, reducing the risk of entanglement and improving surface consistency. The square 90° geometry with a 1.6 mm corner radius offers robust edge support for shoulder cuts and facing operations, while the 0° (negative) relief configuration provides stable cutting behaviour under moderate depth of cut. These geometrical choices help maintain dimensional accuracy and make toolpath planning more predictable on automated lathes. Practical benefits for workshop efficiency and process security Designed as an indexable insert for standard toolholders, the plate’s manufacturing tolerance class M and its A execution ensure interchangeability and repeatable clamping in series production. The Tiger‑tec Silver series is known for balancing wear resistance with toughness, providing a cost-effective solution where consistent results and low regrinding frequency are required. For workshops seeking to reduce downtime and simplify tooling logistics, this plate offers a dependable option that contributes to overall process security and productivity. For tailored recommendations on integrating the Walter Tools SNMA120416-RK5 WKK10S into existing machining processes, contact Metav Werkzeuge for technical guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMA120416-RK5-WKK10S-WALTER Product type: Turning insert (indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Core specifications Insert shape: Square 90° Size: 12 mm Thickness: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Chipbreaker: RK5 Tolerance class: M Materials & special features Coating technology: Tiger‑tec Silver (coated cemented carbide) Suitable for: Cast iron (ISO K) Execution: A Wendeplatte designation: SNMA120416-RK5 WKK10S FAQ What materials is this insert optimised for? The SNMA120416-RK5 WKK10S is optimised for machining cast iron (ISO K), where its Tiger‑tec Silver coating and RK5 chipbreaker provide improved resistance to abrasive wear and reliable chip control. Which machining operations suit the square SNMA120416-RK5 insert? Square geometry and a 1.6 mm corner radius make the insert appropriate for shoulder turning, facing and general turning operations on cast-iron components where robust edge support is required. How does the RK5 chipbreaker affect chip formation? The RK5 chipbreaker is designed to produce short, controlled chips when cutting cast iron, reducing chip build-up and improving surface consistency during continuous turning operations. Is the SNMA120416-RK5 compatible with standard toolholders? Yes, the SNMA120416-RK5 is an indexable insert manufactured to common tolerance class M and A execution, ensuring interchangeability with compatible toolholders designed for square 90° plates. What advantages does the Tiger‑tec Silver series provide in production? The Tiger‑tec Silver series delivers a balanced combination of wear resistance and toughness, extending tool life and enabling consistent machining performance across serial production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between Metav Werkzeuge and the named manufacturers. The offered item is original, factory-new goods from Walter Tools.
SNMA120416-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, an RK5 chipbreaker optimised for cast iron and the stable square 90° geometry for reliable, high‑productivity turning; order directly via Metav Werkzeuge or contact their consultants for specification support. SNMA120416-RK5 WKK20S indexable turning insert — Walter Tools, Tiger‑tec Silver for cast iron The SNMA120416-RK5 WKK20S is a square, negative‑rake indexable turning insert engineered for productive machining of cast iron components in turning operations Tiger‑tec Silver coating for abrasion resistance RK5 chipbreaker optimised for cast iron Square 90° form with 1.6 mm corner radius Negative rake 0° for stable cutting Higher productivity through abrasion‑resistant grade and coating The combination of the WKK20S grade and Tiger‑tec Silver coating delivers tangible gains in tool life when facing the abrasive tendencies of cast iron. The coated carbide chemistry is tuned to resist flank wear and withstand short, brittle chips typical of grey and nodular cast irons, so machining cycles run for longer without insert changes. This results in fewer tool interventions and improved process uptime for serial turning applications. Predictable chip control and process security for consistent parts The RK5 chipbreaker is specifically profiled for fracturing and evacuating chips from cast‑iron cuts, reducing the risk of built‑up edge and improving surface consistency. The negative rake (0°) geometry and square 90° form provide a stable cutting edge and predictable cutting forces, supporting steady feed and depth values and minimising tool vibration. The generous 1.6 mm corner radius increases edge robustness, which favours repeatable dimensional accuracy in batch production. Practical fitment and system advantages for workshop use The SNMA120416 platform with thickness 04 and size 12 mm plugs into common turning toolholders and permits fast reindexing for minimal downtime. The insert’s square shape offers four usable cutting corners, helping to lower tooling costs per produced part. As a coated, industry‑grade insert from Walter Tools, it is suitable where abrasion resistance and process reliability in cast‑iron turning are priorities; technical selection should consider machine rigidity and recommended cutting parameters for optimal life. For robust cast‑iron turning with Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number / SKU: SNMA120416-RK5-WKK20S-WALTER Product name: SNMA120416-RK5 WKK20S Product type: Indexable turning insert (square) Brand: Walter Tools Facts Corner radius: 1.6 mm Insert size: 12 mm Thickness: 4 mm Free rake angle: 0° Tolerance class: M Special features Grade: WKK20S Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: RK5 Geometry: Square 90° Application focus: Cast iron machining (K) FAQ What materials is this insert designed for? The insert is formulated for machining cast iron materials; the WKK20S grade and Tiger‑tec Silver coating are optimised for abrasive, short‑chip behaviour typical of cast iron. How does the RK5 chipbreaker influence performance? The RK5 chipbreaker promotes predictable chip formation and evacuation in cast‑iron turning, reducing the risk of chip entanglement and improving surface quality. Is the insert suitable for high‑feed or heavy roughing operations? The square 90° form and 1.6 mm corner radius provide robustness for demanding turning tasks; selection of feeds and depths should align with machine rigidity and tooling parameters to exploit its strength. How many cutting edges are available per insert? The square design offers four usable cutting corners; indexing the insert restores a new cutting edge and extends overall tool life. Can this insert be used in standard SNMA toolholders? Yes, the SNMA120416 platform is compatible with SNMA‑type turning toolholders made for square inserts of this size. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMA120416-RK7 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, WKK10S carbide grade and reliable RK7 chip control for stable, productive machining of cast iron; order via Metav Werkzeuge or consult the specialists for application-specific cutting data. SNMA120416-RK7 WKK10S turning indexable insert — 90° square, 0° negative rake (Walter Tools) The SNMA120416-RK7 WKK10S is a 90° square indexable insert optimised for turning operations in cast iron, offering a coated carbide grade from the Tiger·tec Silver series for abrasion resistance and consistent tool life. Tiger·tec Silver coating for abrasive cast iron Optimised chip control with RK7 chipbreaker 90° square geometry for robust turning Corner radius 1.6 mm for stable cutting High-performance machining for abrasive cast iron The combination of the WKK10S grade and the Tiger·tec Silver coating provides a balance between wear resistance and toughness that is tailored to abrasive cast iron materials. The coated carbide construction resists abrasive wear common in grey and nodular cast irons, which leads to more consistent cutting performance and longer tool life. The insert’s 0° negative rake geometry increases edge robustness and reduces the risk of chipping under interrupted cuts, making it suitable for demanding turning tasks where stability is paramount. By choosing a grade and coating designed specifically for cast iron, production reliability and process capability are strengthened, reducing unscheduled tool changes and improving output consistency. Predictable chip control and improved surface stability The RK7 chipbreaker is designed to produce short, controllable chips when machining cast iron, reducing the likelihood of entanglement and improving chip evacuation. The 90° square format combined with a 1.6 mm corner radius delivers a strong cutting edge that tolerates heavy engagement and provides dimensional stability for external turning operations. These features translate into reproducible surface quality and fewer interruptions during bar feed or batch production runs. The insert’s geometry supports steady machining feeds and helps maintain toolholder stiffness, which benefits surface finish and reduces vibration in medium-duty turning. Practical integration into existing tool systems Designed to fit standard SNMA-style tool pockets, the insert is offered in a compact 12 mm size with thickness code 04 and tolerance class M, enabling straightforward replacement in many common turning toolholders. The coated grade and chipbreaker combination is particularly suited for short-breaking chips typical of cast irons, so machine setup can focus on optimising cutting data rather than compensating for erratic chip behaviour. Where higher process reliability is required, pairing this insert with stable clamping, correct seat geometry and consistent coolant application will leverage the Tiger·tec Silver advantages and deliver productive, repeatable results across batches. Contact Metav Werkzeuge for tailored application advice, availability and material-specific recommendations for the SNMA120416-RK7 WKK10S insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: SNMA120416-RK7-WKK10S-WALTER Part number: SNMA120416-RK7 WKK10S Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKK10S Execution: A Tolerance class: M Chipbreaker: RK7 Facts Corner radius: 1.6 mm Insert size: 12 mm Plate form: Square 90° Rake angle: 0° (negative) Thickness code: 04 Special features Coating: Tiger·tec Silver (coated carbide) Material suitability: Cast iron Geometry: Negative rake for robust edge Compatibility: SNMA pocket style Chip control: RK7 chipbreaker FAQ Which materials is this insert primarily intended for? The SNMA120416-RK7 WKK10S insert is primarily intended for machining cast iron, with the WKK10S grade and Tiger·tec Silver coating optimised for abrasive cast iron conditions. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker produces short, controllable chips when turning cast iron, which improves chip evacuation and reduces interruptions during production with the SNMA120416-RK7 insert. What is the significance of the WKK10S grade? WKK10S is a Walter carbide grade within the Tiger·tec Silver family that balances wear resistance and toughness for reliable performance when machining cast-iron components. Can this insert be used for interrupted cuts? Yes, the negative 0° rake geometry and 1.6 mm corner radius make the insert robust and suitable for operations with interruptions or varying engagement. Which toolholder pocket fits this insert? The insert has SNMA-style dimensions (SNMA120416-RK7) and is intended for compatible SNMA toolholders offering secure clamping and correct seat geometry. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected marks are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered article is an original, brand-new product from the manufacturer.
SNMA120416-RK7 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the RK7 chipbreaker for consistent chip control when machining cast iron; the square 90° geometry with a corner radius of 1.6 mm provides robust edge strength and reliable performance. Order the SNMA120416-RK7 WKK20S insert directly via Metav Werkzeuge or consult Metav’s advisors for application-specific recommendations. SNMA120416-RK7 WKK20S – Turning indexable insert by Walter Tools, Tiger·tec Silver, RK7 chipbreaker A SNMA120416-RK7 WKK20S turning indexable insert designed for productive cast iron turning, combining a coated carbide grade with a negative 0° clearance to control brittle, breaking chips. Tiger·tec Silver coating for extended life Square 90° plate with 1.6 mm corner radius Optimised for cast iron machining (K group) Reliable chip control for cast iron turning The insert offers stable chip formation through its RK7 chipbreaker, specifically tuned for abrasive, breakable chips typical of cast iron. The coated carbide grade provides consistent performance in intermittent contact and brittle-chip scenarios, reducing the risk of built-up edge and unexpected tool failure. Operators benefit from improved process reliability and fewer interruptions during roughing and semi-finishing operations, which supports a steadier production flow and predictable part quality. Coating and grade engineered for longevity With the Tiger·tec Silver technology and the WKK20S grade, the cutting edge exhibits enhanced wear resistance and thermal stability. The coating strategy reduces flank wear and preserves edge geometry over longer cutting periods, translating into extended tool life and lower tool-change frequency. For production environments where changeover time is costly, this means fewer stoppages and more consistent component tolerances over a series run. Geometry that combines strength and versatility The 90° square shape and corner radius 1.6 mm produce a robust cutting edge suited to heavy engagement and interrupted cuts. The negative 0° clearance geometry supports secure clamping and stable cutting forces, which is advantageous when working with casting irregularities. The plate thickness and form are compatible with standard ISO toolholders for square inserts, enabling straightforward integration into existing turning setups and straightforward indexability for economical use of all cutting corners. Clear application fit and operational advantage Designed for the ISO K workpiece group, the insert is intended for a broad range of cast-iron grades where wear resistance and controlled chip breaking are priorities. The combination of coating, grade and chipbreaker leads to a balanced performance: robust enough for heavier cuts yet controlled enough to produce acceptable surface quality in follow-up operations. For workshops seeking repeatable results on cast-iron components, this insert supports productive machining with reduced tool management overhead. For reliable cast-iron turning with Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored technical advice and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMA120416-RK7-WKK20S-WALTER Designation: SNMA120416-RK7 WKK20S Product type: Turning indexable insert (turning insert) Brand: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Chipbreaker: RK7 Facts Plate size: 12 mm Thickness: 4 mm Corner radius: 1.6 mm Shape: Square 90° Clearance angle: 0° (negative) Tolerance class: M Applications & features Coating: Tiger·tec Silver Material: Coated carbide (WKK20S) Suitable for: Cast iron (ISO group K) Chip control: RK7 chipbreaker Geometry: Square insert, negative rake Series attributes: Stable chip formation, productive machining FAQ What materials is this insert intended for? The SNMA120416-RK7 WKK20S insert from Walter Tools is optimised for cast iron (ISO group K), matching the grade and chipbreaker to abrasive, short-chipping materials. What coating and grade does the insert use? This turning insert features Tiger·tec Silver coating and the WKK20S coated carbide grade, chosen to improve wear resistance and thermal stability in cast-iron turning. What are the key geometric specifications of the insert? The plate is a 90° square insert with a corner radius of 1.6 mm, a thickness of 4 mm and a negative 0° clearance, combined with an RK7 chipbreaker for controlled chips. Can this insert be used for roughing operations? Yes, the robust geometry and wear-resistant grade make the SNMA120416-RK7 WKK20S suitable for roughing and semi-finishing where chip control and edge strength are needed. Is the insert indexable and easy to replace? The SNMA120416-RK7 WKK20S is an indexable turning insert designed for standard square insert toolholders, enabling economical use of multiple cutting corners through simple indexing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer (Walter Tools).
SNMA150612-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating, an RK5 chipbreaker and a compact 1.2 mm corner radius, this turning insert ensures consistent chip control and extended tool life in cast‑iron applications — order the SNMA150612‑RK5 WKK10S directly via Metav Werkzeuge or consult our specialists for cutting parameters and delivery options. SNMA150612‑RK5 WKK10S turning insert for cast iron by Walter Tools — Tiger‑tec Silver, RK5 chipbreaker A SNMA150612‑RK5 WKK10S is a square 90° indexable turning insert with a negative rake and an RK5 chipbreaker, designed specifically for productive machining of cast iron. Tiger‑tec Silver coating for long tool life RK5 chipbreaker for reliable chip control Square 90° form with 1.2 mm corner radius Optimised for cast iron (ISO group K) Consistent chip control for productive turning The combination of the RK5 chipbreaker and the insert geometry provides predictable chip control, which reduces interruptions and improves process stability when machining cast iron. The chipbreaker has been developed for the typical short, brittle chips of cast materials, so operators benefit from fewer tool stoppages and safer swarf handling. This results in smoother production cycles and less time spent on chip management. Durable coating and grade for longer tool life The Tiger‑tec Silver series and the WKK10S grade denote a coated carbide designed to withstand the abrasive wear encountered in cast‑iron turning. The coating increases resistance to flank wear while maintaining edge stability, translating directly into longer tool life and fewer insert changes. For production environments, this means reduced tooling costs per component and improved machining uptime. Geometry tailored to cast‑iron finishing and roughing A square 90° insert with a 1.2 mm corner radius and a 0° negative rake offers a balance between edge strength and surface finish. The robust edge supports heavier cuts during roughing, while the corner radius helps to maintain dimensional accuracy under load. Because the insert is optimised for ISO group K (cast iron), it performs reliably across a range of cast‑iron grades without compromising on repeatability or surface quality. For application advice, exact cutting data or fast delivery of Walter Tools turning tools, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — our technical team will recommend the best parameters for cast‑iron machining and supply options. Technical data Article number: SNMA150612‑RK5‑WKK10S‑WALTER Designation: SNMA150612‑RK5 ISO designation: SNMA150612‑RK5 WKK10S Series: Tiger‑tec Silver Grade: WKK10S Manufacturer: Walter Tools Product type: Turning insert Facts Inscribed size: 15 mm Thickness code: 06 Corner radius: 1.2 mm Free angle: 0° (negative) Shape: Square 90° Tolerance class: M Variant: A Special features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: RK5 Application: Cast iron (ISO group K) Sort description: WKK10S — coated carbide grade for cast iron; adapted to abrasive wear and short, breaking chips Series significance: high wear resistance and universal toughness balance FAQ What materials is this insert suitable for? The SNMA150612‑RK5 WKK10S is optimised for cast iron (ISO group K) and is designed to handle the abrasive wear and short, brittle chips typical of these materials. What benefit does the RK5 chipbreaker provide? The RK5 chipbreaker ensures controlled, short chip formation during turning operations, improving process stability and making chip evacuation more predictable. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases resistance to abrasive wear and stabilises the cutting edge, resulting in longer tool life and more consistent surface quality when using the WKK10S grade. Is the insert suitable for heavy roughing cuts? Yes, the square 90° geometry with a 1.2 mm corner radius and a 0° negative rake provides a robust cutting edge capable of handling heavier cuts while maintaining dimensional accuracy. How many cutting edges are available per insert and how is indexing handled? The SNMA‑style square insert offers multiple indexable cutting edges; once one edge is worn, the insert can be rotated to a fresh edge and reused, reducing tooling consumption. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanation and identification only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
SNMA150612-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of a coated-carbide grade tuned for abrasive cast-iron work, combined with a secure square 90° geometry and an RK5 chipbreaker for consistent short-chip formation; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMA150612-RK5 WKK20S — indexable turning insert for cast iron by Walter Tools SNMA150612-RK5 WKK20S is a square 90° indexable turning insert optimised for machining cast iron, featuring the Tiger·tec Silver coating technology and an RK5 chipbreaker for reliable chip control. Tiger·tec Silver coated carbide RK5 chipbreaker for short chips Square 90° geometry with 1.2 mm radius 0° negative rake for robust cutting High-efficiency cast-iron turning that reduces downtime The SNMA150612-RK5 WKK20S insert is engineered for productive machining of cast iron (ISO group K). The WKK20S grade combines a coated carbide substrate with Tiger·tec Silver technology to resist abrasive wear typical of grey and nodular cast irons. This results in longer useful tool life and fewer index changes, which supports steady production and less unscheduled downtime. The RK5 chip control helps maintain stable cutting conditions, so cycle times remain predictable across batch runs. Predictable chip control for safe, continuous operation An effective chip management strategy is vital when machining cast-iron alloys that generate short, brittle chips. The RK5 chipbreaker is designed to promote consistent short-chip formation and evacuation, reducing the risk of workpiece damage and tool interference. Explained simply, the chipbreaker geometry guides the chip curl immediately after formation, lowering the chance of entanglement and facilitating automatic conveyor or pneumatic removal. The result is smoother processes and reduced manual intervention at the machine. Robust geometry for increased process security The square 90° format and a 1.2 mm corner radius deliver a balance between edge strength and versatility. A larger corner radius enhances edge durability during interrupted cuts and heavy engagement, while the 0° negative rake provides a negative cutting angle that reinforces the cutting edge against mechanical impact. For operations where stability and repeatability matter, this geometry reduces chatter and maintains workpiece tolerance, supporting consistent surface finish and dimensional control. Coating and grade benefits explained for straightforward selection Tiger·tec Silver represents a modern multi-layer coating concept that improves heat resistance and reduces adhesive wear on the cutting edge. The WKK20S designation denotes a Walter Tools grade optimised for abrasive cast-iron applications and universal toughness, making it suitable for a broad range of machining conditions. For users less familiar with grades: a coated carbide insert combines a hard base with a protective layer to delay flank wear and extend edge life, delivering lower tool consumption per part and improved overall economy. For applications requiring secure, wear-resistant inserts for cast-iron turning, contact Metav Werkzeuge for technical guidance and order processing; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: SNMA150612-RK5-WKK20S-WALTER SKU: SNMA150612-RK5-WKK20S-WALTER Designation: SNMA150612-RK5 WKK20S Core specifications Insert size: 15 mm Plate thickness: 06 Shape: Square 90° Corner radius: 1.2 mm Negative rake angle: 0° (negative) Chipbreaker: RK5 Tolerance class: M Execution: A Features & applications Series: Tiger-tec Silver Grade: WKK20S (coated cemented carbide) Recommended material group: Cast iron (ISO group K) Suitable for short, breaking chips typical of cast iron Application focus: Turning / indexable insert operations FAQ Is this insert suitable for cast-iron workpieces? Yes. The SNMA150612-RK5 WKK20S insert from Walter Tools is specifically developed for machining cast iron (ISO group K) and provides wear resistance and chip control for such materials. What advantage does the RK5 chipbreaker offer? The RK5 chipbreaker promotes short, controlled chips when using the SNMA150612-RK5 WKK20S insert, improving evacuation and reducing the risk of chip entanglement during turning operations. How does the 0° negative rake affect performance? A negative rake of 0° increases edge robustness for the SNMA150612-RK5 WKK20S, enhancing resistance to mechanical shock and supporting stable cutting in heavy or interrupted cuts. Can this insert be used for fine finishing or only roughing? With its square 90° geometry and a 1.2 mm corner radius, the insert is versatile; it offers the edge strength needed for heavier cuts while still providing consistent surface quality when used with appropriate cutting parameters. What does the Tiger·tec Silver designation mean for tool life? Tiger·tec Silver indicates a modern multi-layer coating that improves thermal and adhesive wear resistance, extending the service life of the SNMA150612-RK5 WKK20S insert under abrasive cast-iron conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMA150616-RK5 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise chip control and reliable edge life to increase throughput and reduce tool changes. Benefit from a Walter Tools solution optimised for cast-iron turning and request application advice from Metav Werkzeuge for process integration. SNMA150616-RK5 WKK20S – Indexable turning insert, square 90°, Tiger·tec Silver (Walter Tools) SNMA150616-RK5 WKK20S is an indexable turning insert designed for productive machining of cast iron with a square 90° geometry and a 1.6 mm corner radius Tiger·tec Silver coating for high wear resistance Optimised for abrasive cast-iron machining RK5 chipbreaker for controlled, short chips Square 90° form with 1.6 mm cutting corner Greater productivity for cast-iron turning operations The integration of Tiger·tec Silver technology delivers high wear resistance, allowing longer cutting times between indexings and fewer unplanned interruptions. The grade has been developed with the abrasive nature and short, breaking chips of cast iron in mind, so the insert supports consistently high metal removal rates while maintaining dimensional stability. This translates into more efficient cycle times and reduced process variability on serial turning operations. Controlled chips and consistent edge life reduce downtime The RK5 chipbreaker is tailored to chip formation in grey and nodular cast irons, producing short, manageable chips and preventing chip entanglement. Combined with the 1.6 mm corner radius, this geometry promotes a stable cutting edge under intermittent or interrupted cuts, leading to predictable wear progression and fewer tool indexing cycles. The result is enhanced machine uptime and simplified chip handling, especially in lights-out or high-volume turning. Practical handling and secure integration in production The square 90° plate form offers reliable seat support and multiple effective cutting edges per insert, improving cost-efficiency per edge. The standard designation SNMA150616-RK5 WKK20S fits common toolholders for turning applications, enabling quick insert changes and minimal setup time. Documentation and marking match industrial conventions, supporting traceability and easy stock management in workshops and production cells. Contact Metav Werkzeuge for tailored application advice on Walter Tools SNMA150616-RK5 WKK20S and ensure optimal cast-iron machining performance in the workshop Technical Data SKU: SNMA150616-RK5-WKK20S-WALTER Article designation: Drehwendeschneidplatte SNMA150616-RK5 WKK20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte ISO designation: SNMA150616-RK5 WKK20S Facts Geometry: Square 90° Corner radius: 1.6 mm Plate size: 15 mm Freedom angle: 0° (negative) Chipformer: RK5 Thickness code: 06 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated cemented carbide) Material applicability: cast iron Base designation: SNMA150616-RK5 Enrichment: WKK20S adapted to abrasive wear and short breaking chips of cast iron FAQ What materials is this insert suitable for? The SNMA150616-RK5 WKK20S is specifically designed for machining cast iron, with the coating and chipbreaker tuned to handle abrasive cast-iron behaviour. How does the Tiger·tec Silver series improve performance? Tiger·tec Silver enhances wear resistance and thermal stability; when used with the SNMA150616-RK5 WKK20S, it helps to extend edge life during continuous cast-iron turning. Which chip control can be expected with the RK5 breaker? The RK5 chipbreaker on the SNMA150616-RK5 WKK20S produces short, controllable chips, reducing clogging and improving operational safety in turning cycles. Is the insert compatible with standard turnÂing toolholders? The SNMA150616-RK5 WKK20S conforms to common indexable insert geometries for square 90° seats and can be integrated with matching toolholders for quick replacement. What is the benefit of the 1.6 mm corner radius in practical use? A 1.6 mm corner radius balances edge strength and surface finish, providing a robust edge for interrupted cuts while maintaining acceptable workpiece quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any association with Metav Werkzeuge. The offered item is an original, factory-new product of the manufacturer, Walter Tools.
SNMA150616-RK7 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of a grade and coating engineered for abrasive cast‑iron machining combined with a reliable chipbreaker and robust geometry for consistent production results; order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNMA150616-RK7 WKK10S — square 90° indexable turning insert, RK7 chipbreaker | Walter Tools The SNMA150616-RK7 WKK10S is a square 90° turning insert designed for productive, reliable machining of cast iron components in general turning operations. Tiger‑tec Silver coating for long tool life Optimised for cast iron (ISO group K) RK7 chipbreaker for reliable chip control Square 90° insert with 1.6 mm corner radius Stable wear performance for abrasive cast‑iron turning The insert uses the WKK10S grade within the Tiger‑tec Silver family, a coated carbide solution tailored to the abrasive nature of cast iron. The coating and substrate combination reduce flank and crater wear under typical grey‑ and nodular‑cast‑iron conditions, which translates into extended tool life and fewer insert changes during a production shift. For workshops seeking predictable economy, this means fewer process interruptions and lower tooling consumption without sacrificing machining stability. Geometry and chip control for dependable surface quality A square 90° shape combined with a corner radius 1.6 mm and a negative rake 0° delivers a strong cutting edge and controlled engagement during heavy cuts. The RK7 chipbreaker is designed to produce short, easily evacuated chips when turning cast iron, reducing the risk of entanglement and improving surface consistency. Negative rake geometry increases edge strength for interrupted cuts and hard spots typical of cast materials, giving repeatable results and reduced rework. Practical integration and productivity advantages on the shop floor The insert’s nominal size and standard mounting make it compatible with common toolholders used in turning centres, simplifying inventory and changeover. The combination of a robust grade and an effective chipbreaker supports higher metal removal rates and consistent tool life, which together improve overall process efficiency. Technical teams benefit from straightforward tool selection: the insert is engineered specifically for cast‑iron applications, enabling faster setup and more predictable machining windows. For cast‑iron turning operations that demand process reliability, choose the Walter Tools Tiger‑tec Silver SNMA150616‑RK7 WKK10S insert — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: SNMA150616-RK7-WKK10S-WALTER Designation: SNMA150616-RK7 WKK10S Series: Tiger‑tec Silver Grade: WKK10S Manufacturer: Walter Tools Facts Insert form: Square 90° Insert size: 15 Corner radius: 1.6 mm Thickness code: 06 Relief angle: 0° (negative) Chipbreaker: RK7 Tolerance class: M Execution: A Special features Coated carbide cutting grade Optimised for cast iron (ISO group K) Stable chip formation for short chips Robust cutting edge for interrupted cuts Suitable for general turning applications FAQ What materials is this insert intended for? The SNMA150616‑RK7 WKK10S insert is designed for machining cast iron (ISO group K), where the WKK10S grade and Tiger‑tec Silver coating address abrasive wear and breakable chip forms. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker promotes short, controllable chips in cast‑iron turning, improving chip evacuation and reducing the risk of re-cutting, which benefits surface quality and process consistency. Is the negative rake suitable for heavy cuts? Yes. A negative rake 0° increases edge strength and resilience for heavy depths of cut and interrupted surfaces, which supports reliable performance in demanding turning operations. Can this insert be used with standard toolholders? The insert’s square 90° format and conventional dimensions make it compatible with standard turning toolholders designed for SNMA‑style inserts, simplifying replacement and stock management. What production advantages can be expected from the Tiger‑tec Silver series? The Tiger‑tec Silver coating improves resistance to abrasive wear typical of cast‑iron machining, leading to longer tool life, fewer indexings and more consistent cycle times with reduced tooling costs. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMA150616-RK7 WKK20S Wendeplatten - Walter Tools
Combining the WKK20S coated‑carbide grade with the RK7 chipbreaker provides stable chip formation and consistent wear behaviour, optimising cycle times for cast iron machining. The square 90° insert with a 1.6 mm corner radius and 0° (negative) rake offers reproducible cutting performance; order the insert via Metav Werkzeuge or request application advice from the consultants. SNMA150616-RK7 WKK20S — Indexable Turning Insert for Cast Iron (Tiger‑tec Silver) by Walter Tools SNMA150616-RK7 WKK20S is a coated indexable turning insert designed for efficient machining of cast iron components in industrial turning applications Tiger‑tec Silver coated technology Optimised for cast iron (ISO group K) RK7 chipbreaker for controlled chip formation Square 90° form with 1.6 mm corner radius Maximise material removal and tool life with Tiger‑tec Silver The combination of Tiger‑tec Silver coating and the WKK20S grade means the insert is engineered to withstand abrasive wear typical of cast iron. The substrate is a coated carbide, delivering higher resistance to flank and crater wear under interrupted cutting and elevated temperatures. The integrated RK7 chipbreaker improves chip control for short, brittle chips typical of grey and nodular cast iron, which reduces the risk of recut material and tool damage. This results in a more predictable process, fewer tool changes and improved overall productivity. Accurate geometry for repeatable turning results A square 90° shape with a 1.6 mm corner radius provides a robust cutting edge for both roughing and semi‑finishing operations. The 0° (negative) free angle and the declared tolerance class M ensure stable cutting behaviour and secure seat stability in the toolholder. These geometric choices translate into reproducible component dimensions and consistent surface quality, while the square form supports multiple indexings per insert for cost‑effective tool usage. The design reduces vibration and offers a good balance between edge strength and accessibility in tight turning profiles. Application focus and operational benefits in cast iron machining This insert is specified for machining cast iron (ISO group K), where chip brittleness and abrasive constituents demand tailored grades. The WKK20S grade targets those demands by combining wear resistance with sufficient toughness for reliable edge life. The result is reduced downtime, fewer insert indexes and lower process variability. As a product from Walter Tools, the insert benefits from established development in chip control and consistent tool life, aiding manufacturers seeking predictable machining cycles and improved process stability. For machining recommendations or to confirm suitability for specific cast iron grades, contact Metav Werkzeuge for tailored advice and ordering information (info@metav-werkzeuge.com, +49 2822 7131930) Technical data Article number: SNMA150616-RK7-WKK20S-WALTER Article designation: SNMA150616-RK7 WKK20S Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Plate size: 15 mm Free angle: 0° (negative) Plate thickness: 06 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: RK7 Plate form: Square 90° Version: A Material application: Cast iron (ISO group K) FAQ What materials is this insert suitable for? The SNMA150616-RK7 WKK20S is optimised for cast iron (ISO group K) machining, offering abrasion resistance and chip control for brittle cast materials. How does the RK7 chipbreaker affect chip formation? The RK7 chipbreaker produces short, controllable chips in cast iron, improving evacuation and reducing the chance of recutting. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKK20S grade increases wear resistance and thermal stability, extending tool life under aggressive cutting conditions. Is the insert suitable for finishing operations? With its 1.6 mm corner radius and robust geometry, the insert can be used for semi‑finishing and certain finishing tasks where edge strength and reproducible results are required. Which insert features support process stability? The square 90° form, 0° (negative) rake and tolerance class M ensure stable seating and repeatable cutting performance, supporting consistent cycle times. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMA190616-RK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the RK5 chipbreaker in a robust square 90° geometry to achieve reliable, repeatable cast‑iron turning with low tool consumption. Order directly via Metav Werkzeuge or contact our consultants for application advice. SNMA190616-RK5 WKK10S — Square 90° Indexable Turning Insert for Cast Iron | Walter Tools The SNMA190616-RK5 WKK10S is a square 90° indexable turning insert engineered for productive machining of cast iron, combining a coated carbide grade with a chipbreaker developed for short, brittle chips. Tiger‑tec Silver coating for extended tool life RK5 chipbreaker tuned for cast‑iron chip control Square 90° geometry for versatile turning 1.6 mm corner radius for a robust cutting edge Delivering consistent, cost‑effective cast‑iron machining The coated carbide grade from the Tiger‑tec Silver family provides a balance between wear resistance and toughness. Together with the RK5 chipbreaker, this combination reduces flank and crater wear under abrasive conditions commonly encountered when machining cast iron (ISO group K). The result is a lower cost per component through longer tool life and fewer indexings. These technical characteristics support stable process parameters and predictable maintenance intervals, enhancing overall shop-floor efficiency. The insert designation SNMA190616-RK5 WKK10S indicates the geometry and grade in a format compatible with established toolholder systems. Robust geometry for secure cutting and tool life extension A square 90° insert form with a 1.6 mm corner radius delivers a strong cutting edge that tolerates intermittent cuts and variable chip thicknesses. The 0° negative rake (listed as 0° (negative)) contributes to effective shear control and reduces the risk of edge chipping when encountering hard inclusions in cast iron. The thickness designation 06 and the tolerance class M reflect the manufacturing precision and mechanical stability required in demanding turning operations. These design choices aim to provide predictable behaviour when increasing feed or depth of cut for productivity gains while maintaining surface quality. Simple process integration and application guidance The combination of coated carbide technology and a cast‑iron specific chipbreaker makes integration into existing turning processes straightforward. The chipbreaker promotes short, controlled chips, improving evacuation and reducing tool‑holder interference. For process setup, starting parameters may follow Walter Tools recommendations for K‑group materials and then be adjusted for machine power and workpiece specifics. For further machining data or to verify suitability for a particular casting grade, technical advice is available from Metav Werkzeuge; sharing workpiece material details and machine constraints enables targeted recommendations and minimises trial time. Contact Metav Werkzeuge for tailored application support and prompt supply of Walter Tools SNMA190616-RK5 WKK10S — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: SNMA190616-RK5-WKK10S-WALTER Designation: SNMA190616-RK5 WKK10S Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Numbers / Core Technical Data Insert size: 19 Corner radius: 1.6 mm Free angle: 0° (negative) Thickness designation: 06 Tolerance class: M Versions / Special features Coating: Tiger‑tec Silver Chipbreaker: RK5 Geometry: Square 90° Material application: Cast iron (ISO group K) Grade type: Coated carbide FAQ What materials is this insert designed for? The SNMA190616-RK5 WKK10S insert is optimised for machining cast iron (ISO group K), with the Tiger‑tec Silver grade and RK5 chipbreaker tuned to abrasive, brittle chip behaviour. Is the chipcontrol suitable for long, continuous cuts? The RK5 chipbreaker on this Walter Tools indexable insert is designed to produce short, controlled chips in cast iron; for continuous heavy cuts, adjust feeds and toolpath to maintain chip evacuation. How does the 1.6 mm corner radius affect cutting performance? A 1.6 mm corner radius increases edge strength and improves resistance to radial impacts, offering longer tool life under interrupted cutting and aiding surface robustness. Can the insert be used on standard holders for SNMA geometry? The SNMA190616-RK5 WKK10S follows standard SNMA geometry dimensions and is compatible with holders specified for SNMA indexable inserts; verify seat and clamping specifications before assembly. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances wear resistance and heat management during cast‑iron turning, contributing to longer runtimes and consistent component quality with this Walter Tools insert. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMA190616-RK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the WKK20S coated-carbide grade and robust RK5 chipbreaker for consistent, productive machining of cast iron; the square 90° geometry with a 1.6 mm corner radius provides edge stability and predictable tool life. Order this insert through Metav Werkzeuge or consult their specialists for cutting data and application support. SNMA190616-RK5 WKK20S — Indexable turning insert, Tiger‑tec Silver, for cast iron — Walter Tools A SNMA190616-RK5 WKK20S indexable insert engineered for heavy-duty turning of cast iron components, combining a wear‑resistant coating with a chipformer tuned to breakage-prone materials Square 90° insert, 1.6 mm corner radius Tiger‑tec Silver coated, wear‑resistant grade Optimised RK5 chipbreaker for cast iron 0° negative rake for robust roughing Consistent performance on abrasive cast iron The WKK20S cutting grade, part of the Tiger‑tec Silver series, was developed to counter the abrasive wear typical of grey and nodular cast irons. The coated carbide construction delivers a balance between hardness and toughness, which reduces flank wear and extends tool life under interrupted cuts. The RK5 chipbreaker promotes short, controllable chips that are less likely to entangle with workholding, improving machining reliability. For operations where cycle time and repeatability matter, this combination of material and chip control supports steady productivity. Geometry designed for stability and heavy loads A square 90° insert form combined with a 1.6 mm corner radius provides increased edge strength and reduced risk of corner chipping when encountering hard inclusions or interrupted surfaces. The 0° negative rake reinforces the cutting edge and creates a more robust geometry for roughing and heavy stock removal, sacrificing a small amount of sharpness for substantially improved edge security. These geometrical choices mean fewer insert changes and less unplanned downtime for mid‑ to high‑volume turning processes. Practical benefits for shop-floor efficiency Beyond material and geometry, the overall design focuses on easy integration into standard toolholders and predictable machining behaviour. The coated carbide and chipbreaker pairing reduces rework and eases process parameter setting, so cycle times become more consistent. Selection of the correct grade avoids premature wear and lowers tooling costs over production runs. Technical support is available for cutting-speed and feed recommendations, ensuring the grade is applied where it performs best. For tailored cutting data and fast availability of Tiger‑tec Silver inserts from Walter Tools, contact Metav Werkzeuge for application advice and supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SNMA190616-RK5-WKK20S-WALTER Designation: SNMA190616-RK5 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Insert size: 19 mm Corner radius: 1.6 mm Thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Grade: WKK20S (coated carbide) Chipbreaker: RK5 Geometry: Square 90° Suitable for: cast iron Application focus: roughing and productive turning FAQ What materials is this insert suited for? The SNMA190616-RK5 WKK20S insert is optimised for machining cast iron, with the WKK20S grade tuned to handle abrasive wear and broken-chip tendencies common to these materials. How does the RK5 chipbreaker affect chip control? The RK5 chipbreaker produces short, controlled chips when used on cast iron, improving swarf evacuation and reducing the risk of chip-related interruptions during turning operations. Is the insert suitable for heavy interrupted cuts? Yes, the combination of a square 90° shape, 1.6 mm corner radius, and 0° negative rake gives enhanced edge strength, making the insert well suited to heavy or interrupted cuts. Can this grade be used for finishing passes? The SNMA190616-RK5 WKK20S is primarily designed for productive roughing; finishing may require a different geometry or a finer grade depending on surface-finish requirements. Where can cutting data be obtained? Cutting data and application recommendations are available from Metav Werkzeuge; they can advise on speeds, feeds and toolholder choices for the WKK20S grade. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany; www.walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation and comparison. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
SNMA190616-RK7 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the wear‑resistant WKK10S grade for dependable cast iron machining and extended tool life; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. SNMA190616-RK7 WKK10S — indexable turning insert for cast iron, Tiger‑tec Silver (Walter Tools) An SNMA190616-RK7 WKK10S indexable turning insert engineered for productive, repeatable machining of cast iron components with robust geometry for interrupted and continuous cuts Tiger‑tec Silver coated carbide for durability Optimised for cast iron (ISO K) machining Square 90° form with 1.6 mm corner radius RK7 chipbreaker tuned to short, breaking chips Consistent chip control and extended tool life The combination of the WKK10S cutting grade and the Tiger‑tec Silver coating delivers consistent performance when machining abrasive cast iron. The coated carbide substrate resists abrasive wear, which translates into fewer changeovers and longer tool life. The RK7 chipbreaker is specifically tuned to the short, brittle chips typical of cast iron, improving evacuation and helping to maintain steady cutting forces for greater process stability. Robust geometry for heavy‑duty turning tasks A square 90° insert geometry with a 1.6 mm corner radius provides a favourable balance between edge strength and dimensional control. The 0° (negative) relief angle contributes to a robust cutting edge that tolerates interrupted cuts and variable cutting depths, reducing the risk of edge chipping under shock loads. These characteristics make the insert suitable for both stable finishing passes and more demanding roughing operations on cast iron workpieces. Process reliability and economical productivity Tolerance class M and the coated carbide construction enable predictable wear behaviour and repeatable results in production environments. By reducing unplanned tool changes and delivering consistent surface finishes, this insert supports higher throughput and lower unit costs. The design emphasises functionality and ease of use in automated and manual turning centres alike, helping to keep machining cycles efficient and predictable. Application fit and typical uses in workshop practice Designed primarily for ISO group K materials, the insert is intended for cast iron components where abrasive wear and short chip forms are common. Typical applications include facing, profiling and light to medium roughing of cast parts where stable chip control and reliable edge life are priorities. The insert form and chipbreaker make it a practical choice for workshops prioritising uptime and consistent part quality. Contact Metav Werkzeuge today for tailored advice on using Tiger‑tec Silver SNMA190616-RK7 WKK10S inserts in specific cast iron applications and to arrange delivery or technical consultation Technical Data Article number: SNMA190616-RK7-WKK10S-WALTER Product name: SNMA190616-RK7 WKK10S Manufacturer: Walter Tools Facts Insert size: 19 Corner radius: 1.6 mm Relief angle: 0° (negative) Plate form: Square 90° Thickness designation: 06 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKK10S Chipbreaker: RK7 Material group compatibility: cast iron (ISO K) Series: Tiger‑tec Silver Base material: coated carbide FAQ What materials is this insert intended for? The SNMA190616-RK7 WKK10S insert is optimised for cast iron (ISO group K) machining and is tuned to handle abrasive wear and short, breaking chips. How does the RK7 chipbreaker affect performance? The RK7 chipbreaker promotes short chip formation suitable for cast iron, improving chip evacuation and reducing the likelihood of chip entanglement in turning operations. Is the insert suitable for interrupted cuts? Yes, the 0° (negative) relief angle and the 1.6 mm corner radius provide a robust cutting edge capable of tolerating interrupted cutting conditions common in roughing and profiling. Can this insert be used in automated turning centres? The coated carbide grade and stable geometry of the SNMA190616-RK7 WKK10S support predictable wear and repeatable performance, making it well suited to automated production environments. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating enhances abrasive wear resistance and thermal stability, which helps extend tool life and maintain dimensional accuracy over longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected trade names are used for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods of the manufacturer (Walter Tools).
SNMA190616-RK7 WKK20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver grade with the RK7 chipbreaker and a square 90° geometry delivers reliable, wear‑resistant performance for cast‑iron turning. Benefit from stable cutting with a 0° negative rake and a 1.6 mm corner radius for consistent surface quality and extended tool life. Order directly via Metav Werkzeuge or consult their specialists for application advice. SNMA190616-RK7 WKK20S – Square 90° turning insert (Tiger‑tec Silver) by Walter Tools The SNMA190616-RK7 WKK20S is a square 90° turning insert designed for productive machining of cast iron, combining a coated carbide grade and an RK7 chipbreaker for controlled chip formation and improved process reliability. Tiger‑tec Silver coated for enhanced wear resistance RK7 chipbreaker tailored for cast iron machining Square 90° insert with 1.6 mm corner radius 0° negative rake for stable turning performance Increase throughput with a wear‑resistant grade The combination of the Tiger‑tec Silver coating and the WKK20S grade provides increased resistance to abrasive wear, which is particularly relevant when machining cast iron. Coated carbide grades reduce flank and crater wear, so the insert maintains cutting geometry longer and supports higher material removal rates. For production environments this means fewer tool changes and more predictable cycle times, improving overall plant efficiency. Predictable chip control for safer turning The integrated RK7 chipbreaker is engineered for the typical short and brittle chips of cast iron. Effective chip control reduces the risk of entanglement and machine downtime while contributing to consistent surface finish. Operators unfamiliar with chipbreaker terminology can regard this as a functional groove geometry that breaks and evacuates chips reliably, reducing manual intervention and improving process safety. Stable geometry for consistent part quality A square 90° form with a 1.6 mm corner radius and a 0° (negative) rake angle yields mechanical stability during interrupted cuts and heavy engagement. The rigid geometry supports dimensional control and repeatable part quality on tough turning operations. Where component tolerances and repeatability matter, this robustness translates into less scrap and more parts within specification. Practical advantages in everyday production The insert’s designation and tolerance class (M) signal compatibility with standard toolholders and predictable fitment in indexable tool systems. The SNMA190616-RK7 format keeps tool inventory straightforward while the coated WKK20S grade focuses the application on cast iron, avoiding the need for frequent grade swapping. This simplifies process planning and reduces setup complexity across batches. Contact Metav Werkzeuge for tailored application recommendations and to source the Walter Tools SNMA190616-RK7 WKK20S insert for cast‑iron turning — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMA190616-RK7-WKK20S-WALTER Name: Drehwendeschneidplatte SNMA190616-RK7 WKK20S Manufacturer: Walter Tools Facts Shape: Square 90° Corner radius: 1.6 mm Insert size: 19 mm Thickness designation: 06 Rake angle: 0° (negative) Special features Grade / series: Tiger‑tec Silver; WKK20S Chipbreaker: RK7 Material group suitability: Cast iron (K) Tolerance class: M Execution: A FAQ What materials is this insert suited for? The SNMA190616-RK7 WKK20S is optimised for cast iron applications; the WKK20S grade and RK7 chipbreaker are tuned to the abrasive wear and short chip behaviour of cast materials. How does the RK7 chipbreaker affect machining? The RK7 chipbreaker on the Walter Tools insert shapes and fragments chips during turning, improving evacuation and reducing the chance of chip-related interruptions in cast‑iron production. Is the insert compatible with standard toolholders? Yes, the SNMA190616-RK7 form and tolerance class M are compatible with common indexable toolholders designed for SNMA‑type square inserts. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKK20S grade increases resistance to abrasive wear and helps maintain cutting geometry, extending tool life and stabilising cycle times in cast‑iron turning. Can this insert be used for interrupted cuts? The square 90° geometry combined with a 0° negative rake and a 1.6 mm corner radius provides mechanical stability suitable for many interrupted cutting scenarios in cast‑iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMA190624-RK5 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of a robust WKK20S coated grade, an RK5 chipbreaker and a square 90° geometry for efficient, repeatable turning of cast iron; order the insert directly via Metav Werkzeuge or consult our team for application advice. SNMA190624-RK5 WKK20S turning insert — Tiger·tec Silver coated, for cast iron SNMA190624-RK5 WKK20S is a square 90° indexable turning insert designed for productive machining of cast iron components, featuring the Tiger·tec Silver coating and an RK5 chipbreaker for controlled chip formation. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining Square 90° insert geometry Corner radius 2.4 mm for robust cutting edges Improved tool life and consistent performance for abrasive materials The Tiger·tec Silver coating combined with the WKK20S grade is formulated to resist the abrasive wear commonly encountered when machining cast iron. The coated cemented carbide composition provides a stable wear pattern, so flank and crater wear develop predictably rather than suddenly. This translates into fewer interruptions for tool changes and a higher level of process reliability on the shop floor. Where repetitive batch runs are required, the controlled wear characteristics contribute directly to consistent component quality and reduced scrap rates. Controlled chip formation and process stability The RK5 chipbreaker is engineered to produce short, easily evacuable chips when turning grey and nodular cast irons. By promoting frequent chip breakage, the insert reduces the risk of entanglement and tool-to-workpiece interference, improving cycle times and operator safety. The square 90° geometry together with a 2.4 mm corner radius offers a balanced relationship between edge strength and form accuracy, making the insert suitable for both roughing and stable finishing passes in many shop applications. Integration into production workflows and handling advice With a tolerance class M and a standard plate size of 19 mm, the insert is intended for stable clamping in common toolholders and for use in serial production environments. Its negative 0° relief angle supports secure cutting engagement and predictable cutting forces under interrupted cuts. For best results, machining parameters should be adapted to the cast iron grade and machine rigidity; the insert’s design supports higher material removal rates while maintaining surface integrity. For specific cutting data or process optimisation, further technical details are available on request. Contact Metav Werkzeuge for tailored recommendations on mounting, cutting data and availability of SNMA190624-RK5 WKK20S — our consultants will advise on the ideal setup for cast iron applications Technical Data SKU: SNMA190624-RK5-WKK20S-WALTER Article designation: SNMA190624-RK5 WKK20S Product type: Turning insert Facts Plate size: 19 mm Corner radius: 2.4 mm Plate thickness: 0.6 mm Relief angle: 0° (negative) Geometry: Square 90° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK20S (coated cemented carbide) Chipbreaker: RK5 Application: optimised for cast iron machining Execution: A FAQ What materials is this insert suited for? The SNMA190624-RK5 WKK20S turning insert is optimised for machining cast iron; the WKK20S grade and Tiger·tec Silver coating are tailored to resist abrasive wear typical of such materials. How does the RK5 chipbreaker affect machining? The RK5 chipbreaker promotes short chip formation and reliable evacuation, improving process stability and reducing the likelihood of chip-related interruptions when turning cast iron. Can this insert be used for finishing operations? Yes, the square 90° geometry with a 2.4 mm corner radius provides sufficient edge strength for stable finishing passes, provided cutting parameters and machine rigidity are appropriate. Which toolholder types are compatible with the insert size? The 19 mm plate size and tolerance class M are compatible with standard turning toolholders that accept SNMA-style square inserts; proper clamping is essential for repeatable performance. Where to get cutting data and further advice? For application-specific cutting data and optimisation support for the SNMA190624-RK5 WKK20S insert, Metav Werkzeuge can provide detailed recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the referenced manufacturers. The described item is an original, factory-new product of the respective manufacturer.
SNMG090308-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the controlled FP5 chipbreaker for consistent, productive turning of Stahl. Order the insert directly via Metav Werkzeuge or ask our consultants for application support. SNMG090308-FP5 WPP10G — Indexable turning insert for Stahl, Tiger‑tec Gold, Walter Tools A SNMG090308-FP5 WPP10G indexable turning insert engineered for stable chip control and long tool life in medium to high-duty Stahl turning applications. Tiger‑tec Gold coated carbide for high wear resistance FP5 chipbreaker for controlled chip formation Square 90° shape with 0.8 mm corner radius Increase throughput with reliable coated carbide performance The combination of the Tiger‑tec Gold coating and the WPP10G grade yields a wear-resistant cutting edge that maintains performance across extended production runs. Designed for the thermal and mechanical demands of Stahl (ISO P), the coated carbide substrate supports stable cutting and predictable wear behaviour. This stability reduces unplanned tool changes and contributes directly to a more efficient machining cycle, especially in batch production and serial turning. Precise chip control and secure geometry for operational safety The integrated FP5 chipbreaker shapes chips reliably at common feed and depth ranges, improving evacuation and minimising risk of entanglement. The square 90° geometry with a 0.8 mm corner radius provides a robust cutting corner for facing and medium-turning operations, while the 0° negative relief ensures rigidity under higher cutting forces. These features combine to reduce machine downtime and support safe, continuous operation on lathes and turning centres. Clear specification for predictable tool selection Tolerance class M, thickness code 03 and size code 09 match common toolholder interfaces, simplifying tool inventory and changeover. The insert’s negative rake configuration suits applications where stability and edge strength take precedence over ultra-fine finishes. As a coated hardmetal grade, WPP10G is optimised for Stahl machining, offering a balanced mix of wear resistance and toughness for universal job shops and production environments. Practical benefits for workshop productivity Using a dedicated grade and chipbreaker designed for Stahl reduces process variability: tool life becomes more predictable and surface integrity more consistent. The robust square insert form supports aggressive cuts where required, while the coating technology helps maintain edge integrity at elevated cutting temperatures. For operations seeking a pragmatic balance of performance and cost-effectiveness, this insert delivers measurable gains in cycle time and repeatability. Contact Metav Werkzeuge for application matching, cutting data recommendations and ordering of SNMG090308-FP5 WPP10G — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNMG090308-FP5-WPP10G-WALTER Label: Drehwendeschneidplatte SNMG090308-FP5 WPP10G Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: FP5 Shape: Square 90° Size code: 09 Thickness code: 03 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Numbers / Core technical data SKU: SNMG090308-FP5-WPP10G-WALTER Size: 09 Thickness: 03 Corner radius: 0.8 mm Relief angle: 0° (negative) Materials / Special features Coating technology: Tiger‑tec Gold Substrate: Coated carbide Suitable for: Stahl (ISO P) Design: Square indexable insert Tolerance: M FAQ What materials is this insert suitable for? This SNMG090308-FP5 WPP10G insert is specified for Stahl (ISO P) applications; the WPP10G grade and Tiger‑tec Gold coating are optimised for unalloyed and alloyed steels. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker on the SNMG090308-FP5 provides controlled chip formation to aid evacuation, reduce re-cutting, and increase machining safety during turning operations. What does the 0° (negative) relief angle imply for cutting? A 0° negative relief delivers increased edge strength and stability under higher cutting forces, making the insert suitable for heavier cuts where robustness is required. Can the insert be used for finishing operations? While the coated grade offers good edge integrity, the square geometry and 0.8 mm corner radius are best suited to medium finishing and general turning; ultra-fine finishing may require different geometries or smaller corner radii. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited solely for explanation. No affiliation between Metav Werkzeuge and the mentioned brands is implied. The offered item is original, factory-new product from the manufacturer.
SNMG090308-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and high process security for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. SNMG090308-FP5 WPP20G — Square 90° indexable turning insert, Tiger·tec Gold (Walter Tools) The SNMG090308-FP5 WPP20G is a square 90° indexable insert engineered for robust steel turning and general-purpose production machining. Tiger·tec Gold coating for extended life Grade WPP20G optimised for steel FP5 chipbreaker for stable chip control 0° negative rake for high cutting stability Maximise productivity in steel turning The SNMG090308-FP5 WPP20G insert combines a Tiger·tec Gold coating with the WPP20G coated-carbide grade to deliver a reliable balance between wear resistance and toughness when machining steel (ISO P). The FP5 chipbreaker is designed to produce controllable, short chips across a broad range of cutting conditions, reducing interruptions and supporting longer uninterrupted cycles. With a 0° negative rake angle, the geometry increases edge strength for demanding cuts and interrupted operations, while the 0.8 mm corner radius contributes to robustness at the cutting edge. These characteristics translate into measurable productivity gains and reduced tool-change frequency. Consistent surface quality and predictable tool life A stable cutting edge ensures repeatable results. The insert’s coating and carbide composition reduce flank wear and the risk of built-up edge, supporting constant surface finish from part to part. The insert’s tolerance class M and square 90° format provide dimensional reliability for profiling and external turning operations, making it suitable where process security and reproducibility are priorities. The technical combination reduces scrap rates and supports predictable maintenance planning, delivering economic benefits across production batches. Practical application guidance for efficient integration The square geometry and robust thickness code give the insert mechanical rigidity that supports moderate to heavy cutting depths and interrupted cuts. The FP5 chipformer works particularly well in longitudinal and facing passes on unalloyed and alloyed steels, promoting safe chip evacuation. As the grade is specified for steel (ISO P), choose feeds and speeds that align with workpiece alloy and machine capability to exploit the insert’s wear resistance and toughness. For precise parameter selection or special applications, Metav Werkzeuge provides application-oriented advice to integrate the insert into existing toolholders and processes. For demanding steel machining, specify the Walter Tools Tiger·tec Gold SNMG090308-FP5 WPP20G insert and contact Metav Werkzeuge for tailored application support: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMG090308-FP5-WPP20G-WALTER Designation: SNMG090308-FP5 WPP20G Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP5 Shape: Square 90° Size code: 09 Thickness code: 03 Corner radius: 0.8 Rake angle: 0° (negative) Tolerance class: M Manufacturer: Walter Tools Core data Corner radius: 0.8 mm Rake angle: 0° (negative) Size code: 09 Thickness code: 03 Tolerance class: M Special features Tiger·tec Gold coated cemented carbide Grade WPP20G for steel (ISO P) FP5 chipbreaker for reliable chip control Square insert geometry for robust cutting Negative rake for enhanced edge strength Suitable for turning of unalloyed and alloyed steel FAQ Which materials is this insert suitable for? The SNMG090308-FP5 WPP20G insert is specified for steel machining (ISO P); the WPP20G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation characteristics typical of steels. What does the WPP20G grade indicate? WPP20G is Walter Tools’ coated-carbide grade within the Tiger·tec Gold family, offering a balance of wear resistance and toughness for general steel turning applications. How does the FP5 chipbreaker influence machining? The FP5 chipbreaker produces controlled, short chips across a range of feeds and depths, improving chip evacuation and reducing the risk of entanglement during turning operations with the SNMG090308-FP5 WPP20G. For which operations is the square 90° insert recommended? The square 90° geometry is suitable for external turning, profiling and robust general-purpose cuts where edge strength and indexable corners are beneficial. What is the advantage of the 0° negative rake angle? A 0° negative rake angle increases cutting-edge strength and stability, which is advantageous for interrupted cuts and heavy-depth roughing passes using the SNMG090308-FP5 WPP20G. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
SNMG090308-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger-tec Silver coating and a geometry optimised for cast iron: robust chip control and extended tool life enable smoother production. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMG090308-MK5 WKK10S square indexable turning insert – Tiger-tec Silver, Walter Tools The SNMG090308-MK5 WKK10S is a square indexable turning insert developed for productive and reliable machining of cast iron, combining a coated carbide grade with a controlled chipbreaker for stable performance. Tiger-tec Silver coated carbide Optimised for cast iron ISO K MK5 chipbreaker for controlled chips 0.8 mm corner radius, square 90° form Coating and substrate tailored for abrasive cast-iron work The combination of Tiger-tec Silver and a coated carbide substrate delivers resistance to the abrasive wear typical of cast iron machining (ISO K). The coating reduces flank wear and maintains edge integrity during interrupted cuts, which translates into longer tool life and fewer insert changes. For operations where short, breaking chips and high abrasion occur, this grade provides predictable performance and cost-effective machining cycles. Geometry that stabilises cutting and chip control The engineered MK5 chipbreaker and 0° rake (negative) produce reliable chip breaking and secure cutting edge support. The square 90° form with a 0.8 mm corner radius offers a balance between strength and edge definition, enabling both robust roughing passes and fine finishing when required. Controlled chip formation reduces the risk of tool or workpiece damage and simplifies chip evacuation in high-volume turning cells. Productivity through repeatability and reduced downtime With a focus on wear resistance and consistent edge geometry, this insert helps maintain cycle times and part tolerances over extended tool life. The WKK10S grade is optimised for the mechanical demands of cast-iron components, which commonly present abrasive particles and fluctuating cutting forces; this results in stable performance and fewer interruptions for regrinding or tool changes. Such consistency supports higher uptime and predictable output in production environments. Clear application profile and handling guidance The insert is explicitly specified for cast iron machining (ISO K), making it suitable for foundry components, brake discs and other grey or nodular cast-iron parts where chip breaking and abrasion resistance are priorities. The tolerance class M indicates standard dimensional accuracy for straightforward indexing and interchangeability in compatible toolholders. Select appropriate cutting parameters for coated carbide inserts and ensure correct clamping torque to preserve the insert seat and cutting edge integrity. Contact Metav Werkzeuge for tailored application support or a personalised quotation for Walter Tools SNMG090308-MK5 WKK10S — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical details Article number: SNMG090308-MK5-WKK10S-WALTER Product type: Indexable turning insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Chipbreaker: MK5 Form: Square 90° Free cutting angle: 0° (negative) Corner radius: 0.8 mm Thickness code: 03 Size code: 09 Tolerance class: M Suitable material group: Cast iron (ISO K) Data Coating: Tiger-tec Silver Material: Coated carbide Application: Cast iron machining Plate thickness: 3 mm Corner radius: 0.8 mm Plate form: Square 90° Chip control: MK5 Special features Designed for abrasive wear in cast iron Stable cutting edge for interrupted cuts Balanced edge for roughing and finishing Standard tolerance for easy indexing Walter Tools manufacturing quality FAQ What materials is this insert suitable for? The SNMG090308-MK5 WKK10S is specified for machining cast iron (ISO K) and is formulated to cope with the abrasive wear typical of such materials. How does the MK5 chipbreaker improve machining? The MK5 chipbreaker on the insert controls chip shape and evacuation, reducing the risk of entanglement and enabling stable cutting in cast-iron turning operations. What does the 0° (negative) free cutting angle mean for performance? A 0° rake provides a neutral to negative geometry that strengthens the cutting edge, offering robustness for interrupted cuts and heavy engagement common in cast-iron work. Is this insert suitable for finishing as well as roughing? Yes — the square form with a 0.8 mm corner radius delivers sufficient edge strength for roughing while allowing improved surface results when used with appropriate parameters. How is repeatability ensured when replacing inserts? Tolerance class M ensures standardised dimensions and simple interchangeability in matching toolholders, supporting consistent positioning and repeatable results with each index. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Mark names and registered trademarks are used for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
SNMG090308-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver wear resistance, the WKK20S grade tuned for cast iron and the MK5 chipbreaker to secure stable, productive turning of abrasive cast materials; order directly via Metav Werkzeuge or request application advice from the consultants. SNMG090308-MK5 WKK20S Drehwendeschneidplatte — Tiger·tec Silver, optimized for cast iron (Walter Tools) The SNMG090308-MK5 WKK20S is a square indexable insert designed for robust and reliable machining of cast iron, combining a Tiger·tec Silver coating with an MK5 chipbreaker for controlled, short chips. Tiger·tec Silver coating for enhanced wear resistance Optimised for machining cast iron (ISO K) Square 90° insert, 0.8 mm corner radius MK5 chipbreaker for controlled, short chips Longer tool life and predictable process performance The combination of the Tiger·tec Silver coating and the WKK20S grade is engineered to resist the abrasive wear typical of cast iron machining, which translates into longer service intervals and fewer insert changes. The coated carbide grade is tuned for the short, brittle chips produced when turning cast materials, so the cutting edge maintains geometry under cyclical thermal and mechanical loads. For production environments where repeatability and reduced setup downtime are priorities, this insert contributes directly to a more consistent machining process and lower overall tooling consumption. Stable cutting geometry for robust heavy cuts A square 90° shape, a 0° rake (negative) geometry and a 0.8 mm corner radius combine to deliver strong edge support during interrupted cuts and grooving operations. The insert’s geometry provides a stable cutting line and improves edge security where vibrations or impact loads are present. Tolerance class M ensures predictable seating and alignment in compatible toolholders, supporting consistent chip thickness and surface integrity even under demanding feed and depth-of-cut conditions. Controlled chips and improved surface quality The MK5 chipbreaker is optimised to produce short, segmented chips when machining cast iron, reducing entanglement and simplifying chip evacuation. Controlled chips lower the risk of tool damage and improve operator safety while helping to maintain a steady surface finish. In practice, the chip control characteristic reduces interruptions for manual chip clearing and supports higher uninterrupted cutting times, which is beneficial in automated or lights-out machining scenarios. Practical integration and handling in production Designated as SNMG090308-MK5, the insert is compatible with holders that accept the SNMG geometry and can be integrated into existing turning setups with standard clamping systems. The coated grade and chipbreaker combination is suited to serial production as well as single-shift workshops that require dependable performance for cast iron components. Specification-driven selection—focusing on coating, grade and chipbreaker—enables straightforward tool choice and simplifies inventory management for operations processing abrasive cast materials. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss suitability for specific cast iron applications: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: SNMG090308-MK5-WKK20S-WALTER Product name: SNMG090308-MK5 WKK20S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKK20S Facts Insert size: 09 Insert thickness: 03 Corner radius: 0.8 mm Insert shape: Square 90° Rake: 0° (negative) Chipbreaker: MK5 Tolerance class: M Special features Coating: Tiger·tec Silver Material application: cast iron (ISO K) Coated carbide grade Optimised for short, breaking chips Designed for productive cast-iron turning FAQ What materials is this insert intended for? The SNMG090308-MK5 WKK20S is designed specifically for machining cast iron in accordance with the ISO K designation; the WKK20S grade and Tiger·tec Silver coating address abrasive wear and short-chip behaviour. How does the MK5 chipbreaker affect machining of cast iron? The MK5 chipbreaker promotes short, segmented chips when turning cast iron, improving chip control, reducing entanglement and supporting a stable surface finish with fewer interruptions. Is the insert suitable for interrupted cuts and heavy feeds? Yes. The square 90° geometry, 0° negative rake and 0.8 mm corner radius provide strong edge support and stability for interrupted cuts and heavier radial engagement. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with head office in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The mentioned brand name is used solely for explanation. The offered item is original, factory-new merchandise from the manufacturer.
SNMG090308-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the MP3 chipbreaker and a 0.8 mm corner radius for steady, efficient steel turning. The result is improved process stability, longer tool life and consistent surface quality — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG090308-MP3 WPP10G indexable turning insert, Tiger‑tec Gold, for steel — Walter Tools The SNMG090308-MP3 WPP10G is a square 90° indexable insert engineered for robust turning of steel components, combining a coated carbide grade with a dedicated chipbreaker for secure production performance Tiger‑tec Gold coating for extended tool life MP3 chipbreaker for reliable chip control Square 90° form, 0.8 mm corner radius Designed for steel machining (ISO P) Consistent cutting performance for demanding steel turning The insert is built on the Tiger‑tec Gold platform and uses the WPP10G coated carbide grade to address the typical heat and chip-formation behaviour when machining steel (ISO P). This engineered coating reduces flank wear and preserves a stable cutting edge over extended cycles, which translates into fewer tool changes and less unplanned downtime. The square 90° form and defined cutting geometry support predictable cutting forces, enabling steady chip load and improved dimensional consistency on turned parts. Better productivity through controlled chip formation The MP3 chipbreaker is designed to produce short, manageable chips in turning operations on steel, improving evacuation and reducing the risk of entanglement. Controlled chip flow improves surface finish and minimises tool interruptions, resulting in a measurable throughput advantage on repetitive production runs. The negative relief angle of 0° contributes to a robust cutting edge, especially when feed rates fluctuate, and supports reliable performance in both roughing and light finishing passes. Durable edge security and repeatable results Grade WPP10G provides a balanced mix of wear resistance and toughness for widespread steel applications, helping to avoid premature chipping under interrupted cuts. The 0.8 mm corner radius increases corner strength for heavier engagement while still enabling good surface quality. Tolerance class M ensures consistent geometry between inserts, which supports repeatable set‑ups and reduces inspection effort for series production. The combination of coating, grade and geometry delivers higher process security and predictable tool-life economics. Practical handling and integration into existing tooling The insert’s SNMG090308-MP3 designation corresponds to a standard square insert format compatible with a broad range of turning toolholders. Its 03 thickness code and the size code 09 fit conventional turning systems, making replacement straightforward during routine maintenance. For users transitioning from uncoated or earlier-generation grades, the WPP10G variety often permits increased cutting speeds or longer insert life without the need for major parameter changes. For specific cutter body compatibility or parameter recommendations, consult Metav Werkzeuge for tailored cutting data. For tailored application advice or a specification match for the Walter Tools SNMG090308‑MP3 WPP10G, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG090308-MP3-WPP10G-WALTER Article designation: SNMG090308-MP3 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Size code: 09 Thickness code: 03 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP3 Form: Square 90° Material application: Steel (ISO P) Robust geometry for roughing and finishing FAQ Which materials is this insert intended for? The SNMG090308‑MP3 WPP10G is optimised for steel (ISO P); the WPP10G grade and Tiger‑tec Gold coating are tailored for the heat and chip‑formation characteristics common when machining unalloyed and alloyed steels. What benefits does the WPP10G grade provide? WPP10G is a Walter Tools coated‑carbide grade that balances wear resistance and toughness, improving tool life and process reliability in steel turning applications. How does the MP3 chipbreaker influence production? The MP3 chipbreaker promotes short, controllable chips, enhancing evacuation and surface finish while reducing interruption risks, which supports higher uptime in repetitive turning operations. What are the key geometry features to note? The insert is a square 90° form with a 0.8 mm corner radius and a negative relief angle of 0°, providing a strong cutting edge suited to a wide range of roughing and finishing feeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
SNMG090308-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP20G grade for consistent edge life and reliable chip control; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. SNMG090308-MP3 WPP20G — Indexable turning insert for steel (Tiger·tec Gold) by Walter Tools A SNMG090308-MP3 WPP20G indexable turning insert engineered for high-productivity steel turning with a balanced edge geometry and robust chip control. Tiger·tec Gold coating for extended tool life WPP20G coated carbide grade for steel machining MP3 chipbreaker for consistent chip formation Square 90° form with 0.8 mm corner radius Faster, more consistent cutting for serial production The Tiger·tec Gold coating and the insert geometry combine to raise productivity on turning lines where cycle time and surface quality matter. The coated carbide substrate is selected to cope with the heat and wear typical of steel turning, reducing the need for frequent tool changes. As a result, operators benefit from longer intervals between regrinds and fewer process interruptions, while production planners see improved machine utilisation and steadier output. Coating and grade optimised for steel turning The grade WPP20G is a Walter Tools coated carbide formula formulated for the ISO P material group; it balances wear resistance and toughness for a wide range of steel types. The MP3 chipbreaker supports stable chip control in continuous and interrupted cuts, helping to avoid built-up edge and erratic chip shapes. The insert’s geometry features a 0.8 mm corner radius and a 0° negative relief angle, which together provide a strong cutting edge for medium to heavy feeds while maintaining acceptable surface finish in typical turning operations. Designed for reliable integration in turning processes Configured as a square 90° insert in size 09 with a plate thickness of 03, this indexable turning insert fits standard SNMG toolholders and turning systems used in industrial workshops. The item is identified as SNMG090308-MP3 WPP20G and adheres to tolerance class M, making it suitable for repeatable setups and serial production. The overall design focuses on stable cutting behaviour and predictable tool life, which aids process planning and reduces variability in batch production. Discuss application-specific parameters for Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNMG090308-MP3-WPP20G-WALTER Description: SNMG090308-MP3 WPP20G Manufacturer: Walter Tools Product type: Indexable turning insert Facts Size designation: 09 Thickness: 03 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Square 90° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP3 Material application: Steel (ISO P) Designed for stable chip control and extended tool life FAQ What materials is this insert suitable for? The SNMG090308-MP3 WPP20G insert by Walter Tools is designed primarily for the ISO P material group, i.e. turning operations in various steels. What does the WPP20G grade indicate? WPP20G denotes a Walter Tools coated carbide grade from the Tiger·tec Gold family, optimised for a balance of wear resistance and toughness during steel machining. Why is the MP3 chipbreaker important? The MP3 chipbreaker provides controlled chip formation and evacuation in steel turning, contributing to steady cutting conditions and fewer interruptions for chip management. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and is suitable for medium to heavy feed applications, improving tool life while still delivering acceptable surface quality. Can this insert be used for stainless steel or exotic materials? The SNMG090308-MP3 WPP20G is specified for steel (ISO P). No explicit recommendation for stainless steel or other alloys is provided in the product data. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered article is original, brand-new merchandise from Walter Tools.
SNMG090308-MP5 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, a universal WPP20G grade and the reliable MP5 chipbreaker for efficient, consistent turning of steel. Order the SNMG090308-MP5 WPP20G directly via Metav Werkzeuge or consult our specialists for application advice. SNMG090308-MP5 WPP20G Drehwendeschneidplatte by Walter Tools — Tiger‑tec Gold coated carbide, MP5 chipbreaker The SNMG090308-MP5 WPP20G is a square 90° indexable insert designed for productive steel turning in industrial machining environments Tiger‑tec Gold coating for extended tool life Optimised MP5 chip control for stable cuts Square SNMG 90° geometry for versatile turning 0.8 mm nose radius for fine surface finish Longer tool life to reduce process costs The combination of the Tiger‑tec Gold coating and the WPP20G grade delivers a measurable extension of tool life under typical steel machining conditions. Coated cemented carbide helps to resist abrasive wear and oxidation at elevated cutting temperatures, which means fewer insert changes and less downtime. This improved durability translates directly into reduced tooling costs per component and more predictable production cycles. Predictable chip control for stable machining The MP5 chipbreaker geometry is designed for consistent chip formation when machining steels (ISO group P). By producing short, controllable chips across a range of depths of cut and feeds, the insert helps to maintain process stability and reduce the risk of workpiece damage. For operations where repeatability is essential, the controlled chip flow supports automated handling and safe, efficient production runs. Geometry and finish combined for surface quality A square SNMG form with a 0.8 mm nose radius offers a balance between strength and finish capability. The 90° insert shape enables versatile turning operations—shoulder cuts, profiling and general turning—while the modest nose radius contributes to superior surface finishes without compromising edge robustness. This makes the insert suitable for both medium‑duty roughing and finishing passes when process parameters are optimised. Easy integration into existing tool systems The SNMG indexable design follows common tooling standards and tolerance class M, allowing straightforward integration into compatible toolholders. The insert’s specified relief angle of 0° (negative) and thickness sizing enable secure clamping and repeatable positioning in modular tooling systems. For shops aiming to standardise tooling and reduce setup variation, this insert is a practical choice. For secure productivity with Walter Tools’ Tiger‑tec Gold performance and application guidance, contact Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 — to discuss suitability and place an order Technical data Article number: SNMG090308-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte SNMG090308-MP5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core specifications Insert size: 09 Thickness: 03 Nose radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Features / Applications Grade: WPP20G Series: Tiger‑tec Gold Chipbreaker: MP5 Insert shape: Square 90° Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The SNMG090308-MP5 WPP20G is specified for the ISO P group and is optimised for machining steel using the WPP20G coated carbide grade. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this insert promotes short, controlled chips during steel turning, improving process stability and enabling safer automated or manual chip handling. Can the SNMG090308-MP5 WPP20G be used for finishing passes? Yes, with its 0.8 mm nose radius and the Tiger‑tec Gold coating, the insert can achieve good surface finishes when suitable feeds and speeds are applied. Is the geometry compatible with standard toolholders? The SNMG square insert follows common indexable insert standards and tolerance class M, making it compatible with toolholders designed for SNMG inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WSM10S grade for secure chip formation and extended edge life; the FM5 chipbreaker together with a 0° negative rake delivers the stability required for stainless steel and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMG120404-FM5 WSM10S — Square 90° indexable turning insert, Tiger‑tec Silver (Walter Tools) A SNMG120404-FM5 WSM10S indexable turning insert engineered for heavy‑duty machining of stainless steel and high‑temperature superalloys, combining a robust geometry with a specialised chipbreaker. Tiger‑tec Silver coating technology Optimised FM5 chipbreaker for stable chips 0° negative rake for robust cutting Engineered for demanding materials and longer tool life The insert is built on a coated carbide substrate within the Tiger‑tec Silver series and the WSM10S grade, designed specifically for applications where heat and toughness challenge the cutting edge. Its formulation supports secure and repeatable chip formation when machining stainless steel and heat‑resistant alloys, reducing the risk of built‑up edge and improving component quality. The result is a combination of process reliability and predictable tool life that benefits repeat production runs and critical components. Stable cutting performance and predictable process security A designed FM5 chipbreaker and the 0° negative rake provide a stiff, damage‑resistant cutting edge for interrupted cuts and heavy feed conditions. The square 90° form together with a 0.4 mm corner radius offers strong edge support for grooving and profiling operations, while maintaining acceptable surface finishes. By improving edge stability and chip control, the geometry reduces downtime for insert changes and contributes to higher productivity in serial machining. Easy integration, handling and application versatility The SNMG geometry and standard 12 mm size with a 4 mm thickness allow simple mounting in common turning toolholders and quick replacement within established tool‑rooms. Tolerance class M ensures consistent fit and repeatability at the toolpost. The insert is suitable for both roughing and semi‑finishing operations in stainless steel and superalloys, offering a pragmatic solution when process engineers demand a balance of edge life and cutting performance. Contact Metav Werkzeuge for tailored cutting data and procurement of Walter Tools Tiger‑tec Silver SNMG120404-FM5 WSM10S inserts Technical data SKU: SNMG120404-FM5-WSM10S-WALTER Designation: SNMG120404-FM5 WSM10S Product type: Indexable turning insert Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Grade: WSM10S Chipbreaker: FM5 Shape: Square 90° Geometry: negative rake, robust cutting edge Material suitability: stainless steel; heat‑resistant superalloys and titanium (groups M and S) FAQ What materials is this insert best suited for? The SNMG120404-FM5 WSM10S insert from Walter Tools is intended primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S), where secure chip formation and edge stability are required. How does the FM5 chipbreaker influence performance? The FM5 chipbreaker promotes consistent chip control and stable evacuation under higher cutting forces, improving process security and surface finish when using the SNMG120404-FM5 WSM10S. Can the insert withstand interrupted cuts? Yes. The combination of a 0° negative rake and a 0.4 mm corner radius provides increased edge strength and resistance to chipping during interrupted or heavy engagement cuts. Is the SNMG120404-FM5 WSM10S compatible with standard SNMG toolholders? The insert conforms to the SNMG geometry and standard dimensions (12 mm, 4 mm thickness, tolerance class M), making it compatible with common SNMG toolholder systems. What process benefits can be expected when switching to this grade? Using the WSM10S grade and Tiger‑tec Silver technology typically yields more stable cutting edges, reduced downtime due to fewer edge failures, and improved repeatability across batch production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120404-FM5 WSM20S FM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S grade and a reliable FM5 chipbreaker for consistent performance in stainless steel and heat‑resistant alloys; order the SNMG120404‑FM5 WSM20S turning insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG120404‑FM5 WSM20S turning insert — Tiger·tec Silver grade for stainless steel and superalloys (Walter Tools) SNMG120404‑FM5 WSM20S is a square turning insert designed for demanding roughing and finishing operations in stainless steel and heat‑resistant superalloys Tiger·tec Silver coating for high temperature stability WSM20S grade for stainless steel and superalloys FM5 chipbreaker for reliable chip control Square 90° form with 0.4 mm corner radius Increased cutting security for hard‑to‑machine alloys The SNMG120404‑FM5 WSM20S insert combines a proven Tiger·tec Silver coating with the WSM20S carbide grade to deliver stable cutting performance where heat and adhesion are critical. This combination reduces the tendency for built‑up edge when machining stainless steel, supporting a robust and predictable cutting process. The result is fewer interrupted cycles and more consistent component quality, which benefits process planners who prioritise uptime and reproducibility. Controlled chip formation and reduced rework Equipped with the FM5 chipbreaker geometry and a 0.4 mm corner radius, this square insert is engineered for dependable chip control across varying depths of cut. Effective chip shaping lowers the risk of surface damage and makes chip evacuation more reliable, particularly in long or interrupted cuts. For production teams, this translates into lower scrap rates and reduced manual rework, improving overall throughput without sacrificing surface integrity. Geometry tailored to versatile turning tasks The square 90° plate form and a negative 0° relief angle provide a sturdy cutting edge and enhanced edge strength during heavy interrupted cuts. The insert thickness and form support secure clamping and repeatable tool setting, making it suitable for both roughing passes and semi‑finishing operations. Clear geometry choices simplify tool selection and make it easier to standardise tooling across similar stainless steel applications. Practical benefits for shops and OEMs Using a coated grade engineered for high thermal loads means longer effective tool life and fewer insert changes per part lot. The WSM20S grade is matched to the demands of stainless steel and heat‑resistant alloys, helping to maintain dimensional accuracy over longer runs. This focused material compatibility aids purchasing decisions by reducing the need for an extensive variety of grades while ensuring consistent performance where it matters most. For procurement or process advice on the SNMG120404‑FM5 WSM20S insert from Walter Tools, contact Metav Werkzeuge for tailored recommendations and ordering support. Technical data SKU: SNMG120404‑FM5‑WSM20S‑WALTER Product type: Turning insert (Drehwendeschneidplatte) Series: Tiger·tec Silver Grade: WSM20S Facts Plate form: Quadrate 90° Plate size: 12 Plate thickness: 04 Corner radius: 0,4 Free angle: 0° (negativ) Tolerance class: M Special features Chipbreaker: FM5 Material compatibility: S / M (superalloys / stainless steel) Execution: G Designation without grade: SNMG120404‑FM5 FAQ What materials is this insert suited for? The SNMG120404‑FM5 WSM20S insert is specified for stainless steel (M) and heat‑resistant superalloys or titanium (S), reflecting the WSM20S grade’s focus on thermal stability and edge integrity. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker is designed to create manageable chips and steady cutting forces, which improves surface finish and reduces the chance of chip interference during turning operations with the SNMG120404‑FM5 insert. Is the Tiger·tec Silver coating beneficial for long runs? Yes. The Tiger·tec Silver coating provides enhanced resistance to thermal loads and adhesion, extending tool life and supporting consistent performance over extended cycle times when machining stainless steel. What does the 0.4 corner radius mean for cutting? A 0.4 mm corner radius balances edge strength and finish capability; it supports robust cutting during heavier passes while still allowing acceptable surface quality for many finishing operations. Can the insert be used for interrupted cuts? The square form and negative relief combined with the robust grade make this insert suitable for interrupted cuts, offering improved edge stability compared with finer, less robust geometries. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Reliable productivity and consistent chip control are the clear advantages of this high-performance turning insert. With the Tiger·tec Gold coating and the FP5 chipbreaker, the insert offers extended tool life and stable performance for steel machining — order directly via Metav Werkzeuge or consult the Metav team for application advice. SNMG120404-FP5 WPP10G indexable turning insert, Tiger·tec Gold, Walter Tools The SNMG120404-FP5 WPP10G is a square 90° indexable turning insert engineered for efficient steel turning with a coated cemented‑carbide grade and an FP5 chipbreaker. Tiger·tec Gold coating for extended tool life SNMG 120404 geometry, square 90° insert 0.4 mm corner radius for reliable edge strength FP5 chipbreaker optimised for steel turning Proven edge life for high-output turning The combination of the Tiger·tec Gold coating and the WPP10G grade delivers a wear‑resistant cutting edge that is tuned for the thermal and mechanical demands of machining steel (P). The coated cemented‑carbide construction improves resistance to abrasion and built‑up edge, which translates into longer tool life and fewer indexings per workpiece. For production environments that prioritise uptime, this indexable insert reduces the frequency of insert changes and supports consistent cycle times, helping to keep operations predictable and efficient. Stable chip formation and surface quality The FP5 chipbreaker is designed to control chips during turning operations in steels, promoting smooth evacuation and predictable breakage. Together with the 0.4 mm corner radius and the square 90° seat, the geometry offers a balance between edge robustness and surface finish — a decisive factor when components require repeatable dimensional accuracy. By directing chip flow and limiting edge deformation, the system supports reliable surface quality without sacrificing feed or material removal rate. Application scope and process reliability Specified for the machining group P (steel) according to ISO classification, the insert is suitable for unalloyed and alloyed steels where typical heat generation and chip behaviour are expected. The negative 0° clearance design aids in secure clamping and stable cutting forces under varying depths of cut. In practice, this means the insert is well suited to a range of turning operations from finishing to more demanding semi‑roughing steps, offering a straightforward route to process standardisation and fewer tool variants on the shop floor. Integration and handling benefits The SNMG geometry provides a familiar platform for most toolholders used in CNC lathes, simplifying stock management and toolchange logistics. The insert’s design and the Tiger·tec Gold surface treatment reduce sensitivity to boundary conditions, such as interrupted cuts or varying batch material properties, which supports reproducible results across shifts and operators. Technical teams seeking consistent performance in steel turning will find this solution contributes to predictable productivity and lower total tooling cost per part. Contact Metav Werkzeuge for tailored application recommendations or to request the Walter Tools SNMG120404-FP5 WPP10G insert with Tiger·tec Gold coating; eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data SKU: SNMG120404-FP5-WPP10G-WALTER Designation: SNMG120404-FP5 WPP10G Manufacturer: Walter Tools Facts Inscribed circle: 12 mm Thickness code: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated cemented carbide) Chipbreaker: FP5 Geometry: SNMG, square 90° Intended for: steel (P) Brand: Walter Tools FAQ What materials is this insert designed for? The SNMG120404-FP5 WPP10G insert is specified for machining steel (P) according to ISO classification and is optimised for the heat and chip characteristics typical of steel turning. Is the insert coated and what benefit does the coating provide? Yes, the insert uses the Tiger·tec Gold coating on a coated cemented‑carbide grade, which enhances wear resistance and helps to maintain edge integrity for longer running times. Which chipbreaker is fitted and what does it achieve? This indexable insert features the FP5 chipbreaker, designed to promote controlled chip formation and reliable evacuation during steel turning, contributing to surface quality and process stability. What are the key geometric features to consider when selecting a toolholder? The SNMG form provides a square 90° seating and a 0.4 mm corner radius, requiring a compatible SNMG toolholder that accepts negative‑clearance 0° inserts for secure clamping and correct tool geometry. Does this insert support mixed production, from finishing to semi‑roughing? The combination of grade, coating and chipbreaker makes the insert versatile across finishing and semi‑roughing applications in steel, offering a compromise between edge life and cutting capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com