SNMG120404-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the FP5 chipbreaker for predictable chip control and extended tool life, ensuring fewer interruptions in production. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. SNMG120404-FP5 WPP20G indexable turning insert — Tiger·tec Gold, for Stahl (Walter Tools) A SNMG120404-FP5 WPP20G indexable turning insert designed for general steel turning, offering a robust chipbreaker and a coating optimised for long tool life. Tiger·tec Gold coating for extended life Optimised FP5 chipbreaker for smooth chip control Square SNMG 90° form, 0.4 mm corner radius Engineered for Stahl applications, tolerance M Longer service life through advanced coating technology The combination of Tiger·tec Gold and the WPP20G grade delivers a coating system engineered to resist abrasive and adhesive wear during continuous turning of Stahl. The coated carbide construction provides improved heat resistance and reduced flank wear compared with uncoated grades, which translates into longer tool life and fewer indexings. The result is a measurable increase in productive cutting time and reduced tooling consumption, supporting stable process economics and consistent part quality. Reliable chip control and stable cutting geometry Equipped with the FP5 chipbreaker on a SNMG square 90° platform, the insert produces predictable chip formation under a wide range of cutting conditions. The 0.4 mm corner radius and the 0° (negative) relief angle contribute to a robust cutting edge that tolerates moderate interruptions and variable feed rates. These geometrical choices reduce the risk of vibration and edge chipping, enabling steadier surface finishes and repeatable dimension control in batch production. Practical benefits for machining operations and process security The insert’s tolerance class M and series characteristics support reproducible positioning in insert pockets and predictable life cycles, simplifying tool management in production. Classified for the ISO P group, the grade is optimised for different types of Stahl, balancing wear resistance and toughness to handle both stable and demanding cutting tasks. This leads to fewer unexpected tool changes and a more reliable machining schedule, which is especially valuable in high-mix or high-volume turning operations. For tailored application advice or to procure Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SNMG120404-FP5-WPP20G-WALTER SKU: SNMG120404-FP5-WPP20G-WALTER Label: Drehwendeschneidplatte SNMG120404-FP5 WPP20G Walter Tools Product type: indexable turning insert Brand: Walter Tools Facts Size: 12 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Plate form: Square 90° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP5 Series: Tiger-tec Gold Material application: Stahl Edge designation: SNMG120404-FP5 FAQ Which materials are recommended for this insert? The SNMG120404-FP5 WPP20G insert is specified for the ISO P group and is intended primarily for machining Stahl; the WPP20G grade balances wear resistance and toughness for a broad range of steel turning tasks. What advantages does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating on the WPP20G grade improves thermal stability and wear resistance, extending the service life of the SNMG120404-FP5 insert under continuous turning conditions and delivering more consistent surface finishes. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker is tuned to produce controlled chip forms during turning, which reduces the risk of entangling chips and supports safer, more efficient material removal with the SNMG120404-FP5 WPP20G insert. Is the geometry suitable for interrupted cuts? The combination of a square SNMG 90° form, a 0.4 mm corner radius and a 0° (negative) relief angle provides a robust cutting edge that can tolerate moderate interruptions while maintaining edge stability and dimensional accuracy. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the brands named. The offered item is an original, factory‑new product of Walter Tools.
SNMG120404-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP20G grade and a robust MM5 chipbreaker for dependable machining of stainless steels; this insert supports stable chip formation and consistent edge life. Order the SNMG120404-MM5 WMP20G directly via Metav Werkzeuge or consult our technical team for application advice. SNMG120404-MM5 WMP20G — Indexable turning insert by Walter Tools (Tiger·tec Gold, for stainless steels) The SNMG120404-MM5 WMP20G is a square 90° indexable turning insert designed for machining stainless steels under medium to robust conditions, offering coated carbide performance and reliable chip control. Tiger·tec Gold coated grade WMP20G Optimised for stainless steels (ISO M) Square 90° geometry, 0.4 mm corner radius MM5 chipbreaker for stable chip control Reliable performance on stainless steels The combination of the Tiger·tec Gold coating and the WMP20G cutting grade provides a coated carbide solution tailored to the challenges of machining stainless steels. These materials tend to be tough and generate heat; the insert’s coating and grade improve wear resistance and help maintain a stable cutting edge under elevated temperatures. The result is improved process security and fewer unscheduled tool changes, which contributes directly to a steadier production flow and predictable component quality. Process stability and economical production The insert’s square 90° form and 0.4 mm corner radius deliver a balance between edge strength and versatile cutting geometry for a wide range of turning tasks. The MM5 chipbreaker is designed to support consistent chip formation, reducing the risk of entanglement and improving swarf handling in automated and manual turning operations. With a 0° (negative) rake, the geometry prioritises edge robustness, making the insert better suited to heavier cuts and intermittent cuts where secure edge retention is essential. Application guidance and system compatibility Classified for ISO group M, this insert is intended specifically for rostfreier Stahl (stainless steels) and performs well in middle to robust cutting conditions. Its geometry and chip control features make it suitable for general turning tasks where build‑up edge and thermal load can compromise surface finish or tool life. For machine setup, pair the insert with a compatible SNMG pocket and select cutting parameters that account for stainless steel’s tendency to work‑harden; Metav Werkzeuge’s advisors can assist with parameter selection and holder recommendations to maximise tool life and process reliability. Contact Metav Werkzeuge for specific application advice or to check availability of Walter Tools Tiger·tec Gold SNMG120404-MM5 WMP20G; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMG120404-MM5-WMP20G-WALTER Designation: SNMG120404-MM5 WMP20G Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Measurements Insert size: 12 Plate thickness: 04 Corner radius: 0.4 mm Free rake angle: 0° (negative) Features and applications Chipbreaker: MM5 Suitable for: stainless steels (ISO M) Coating / material: coated cemented carbide (Tiger·tec Gold) Plate form: Square 90° FAQ Which materials is this insert suitable for? The SNMG120404-MM5 WMP20G from Walter Tools is intended for stainless steels (ISO group M) and is optimised for medium to robust machining conditions. What does the MM5 chipbreaker do? The MM5 chipbreaker on this insert improves chip control and supports consistent chip formation, which helps maintain process stability during turning operations. How does the 0° (negative) rake angle affect performance? A 0° (negative) rake) increases edge strength and robustness, making the insert suitable for tougher cuts and situations with interrupted cutting. Is this insert suitable for finishing work? The geometry and the 0.4 mm corner radius favour robust performance; for fine finishing, consider the required surface tolerance and choose cutting parameters accordingly—Metav Werkzeuge can recommend optimised settings. What series and coating does the grade use? The cutting grade is WMP20G, part of the Tiger·tec Gold series, a coated carbide solution designed to improve wear resistance when machining stainless steels. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners; brand names and registered trademarks are used for descriptive purposes only and do not imply any affiliation between our company and the trademark holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120404-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, consistent chip control and robust edge strength to maintain steady production when machining demanding alloys; order directly via Metav Werkzeuge or ask the consultants for application advice. SNMG120404-MM5 WSM20S square turning insert – Tiger·tec Silver, 0° negative rake — Walter Tools The SNMG120404-MM5 WSM20S is a square indexable turning insert designed for heavy and heat‑generating machining tasks, primarily used in the safe and productive turning of rostfreier Stahl and heat‑resistant superalloys. Square 90° geometry for stable cutting Tiger·tec Silver coating for heat resistance 0° negative rake for heavy depth of cut MM5 chipbreaker for secure chip control Stable cutting for demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade provides a coated‑carbide solution optimised for materials that generate heat and resist chip breakage. The substrate and multilayer coating promote stable chip formation, reducing the risk of built‑up edge and enabling longer cutting windows in rostfreier Stahl and nickel‑based alloys. The supplied MM5 chipbreaker improves chip flow under variable cutting conditions; in practice this means fewer interruptions for chip removal and a steadier process, which raises throughput and reduces scrap. Robust edge geometry that supports productivity A 0° negative rake combined with a 0.4 mm corner radius gives a mechanically strong cutting edge that tolerates intermittent cuts and higher feed rates. The square 90° plate form with a plate size of 12 (designation code) and thickness code 04 is intended for applications where rigidity is essential. These geometrical choices allow for reliable indexing and repeatable tool set‑up, supporting consistent surface finishes and predictable tool life. For workshops seeking a balance between aggressive metal removal and process security, this configuration reduces rework and supports predictable cycle times. Reduced downtime through wear resistance and process security The coated carbide construction and the WSM20S grade combine to resist abrasive and thermal wear, extending the usable life of each insert and lowering tooling cost per component. With a focus on machining rostfreier Stahl and high‑temperature alloys, the insert reduces the frequency of tool changes and contributes to continuous production. Coupled with the brand’s engineering, the insert helps maintain dimensional accuracy throughout longer production runs, improving overall equipment effectiveness and contributing to a more economical machining strategy. Speak to Metav Werkzeuge for application recommendations on Walter Tools turning inserts such as the SNMG120404-MM5 WSM20S and arrange a cutting trial or material‑specific machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMG120404-MM5-WSM20S-WALTER Designation: SNMG120404-MM5 WSM20S Product type: Turning insert Series: Tiger‑tec Silver Grade: WSM20S Facts Size: 12 Thickness code: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MM5 Plate form: Square 90° Coating: Tiger·tec Silver (coated carbide) Suitable for: rostfreier Stahl, heat‑resistant superalloys and titanium where applicable Execution: G FAQ What materials is this insert designed for? The SNMG120404-MM5 WSM20S insert is formulated for machining rostfreier Stahl and heat‑resistant superalloys; the Tiger·tec Silver coating and WSM20S grade enhance thermal stability and edge life. How does the MM5 chipbreaker affect performance? The MM5 chipbreaker promotes secure chip control under a range of feeds and depths of cut, improving process stability and reducing interruptions during turning with the Walter Tools SNMG120404-MM5 WSM20S. Is the 0° negative rake suitable for roughing operations? Yes, the 0° negative rake provides a mechanically strong cutting geometry that supports heavier depths of cut and intermittent engagement, making it well suited to robust roughing tasks. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120404-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the combination of the WSM30S grade and the MM5 chipbreaker for reliable chip formation and extended edge life; the robust geometry ensures consistent performance in challenging materials. Order directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. SNMG120404-MM5 WSM30S — Indexable turning insert with Tiger‑tec Silver coating and MM5 chipbreaker (Walter Tools) The SNMG120404-MM5 WSM30S is a square indexable turning insert engineered for machining stainless steels and heat‑resistant superalloys, providing stable chip control and a durable cutting edge for demanding turning operations Tiger‑tec Silver coated carbide MM5 chipbreaker for secure chip control 0.4 mm corner radius for fine finishing Square 90° form with 0° negative rake Consistent performance in stainless steels and superalloys The Tiger‑tec Silver coating combined with the WSM30S grade is designed to withstand the thermal and mechanical loads typical of stainless steels and superalloys. The coating increases heat resistance and minimises adhesive wear, which supports a stable cutting edge and predictable tool life. This results in fewer interruptions for edge changes and a more economical process in serial production settings, particularly where materials tend to work‑harden or generate high temperatures. Geometry engineered for surface quality and chip control The insert’s MM5 chipbreaker and 0.4 mm corner radius produce short, controlled chips and a smooth surface finish in turning operations. The square 90° form delivers robust support at the corner while the 0° negative rake enhances edge strength for moderate to heavy cuts. Together these features translate into dependable dimensional stability and reduced risk of built‑up edge, helping to maintain component tolerances and surface integrity in mass production. Designed for productivity and process security As an offering from Walter Tools, this grade and geometry combination is aimed at improving productivity through consistent performance and repeatable results. The coated carbide composition reduces wear rates under high workpiece temperatures, promoting longer intervals between index changes and less unscheduled downtime. The outcome is a more efficient machining cycle with improved overall equipment effectiveness and stable part quality. Practical notes for integration and use The SNMG‑format insert is compatible with standard holders specified for this geometry; correct clamping and toolholder rigidity are essential to exploit the chip control benefits. When applied to tough, heat‑generating materials, ensure adequate workpiece support and review coolant strategy where applicable to aid chip evacuation. The SNMG120404-MM5 insert is particularly suited to facing and longitudinal turning in corrosive or heat‑resistant alloys where a strong cutting edge and reliable chip formation are priorities. Request the Walter Tools SNMG120404-MM5 WSM30S from Metav Werkzeuge for robust machining of stainless steels and superalloys or contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com for tailored advice Technical Data Article number: SNMG120404-MM5-WSM30S-WALTER Name: Drehwendeschneidplatte SNMG120404-MM5 WSM30S Brand: Walter Tools Facts Inscribed circle: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Clearance angle: 0° negative rake Tolerance class: M Special features Tiger‑tec Silver coating WSM30S carbide grade (coated cemented carbide) MM5 chipbreaker geometry Square 90° plate form Suitable for stainless steels and heat‑resistant superalloys Designed for stable chip formation and reliable edge life FAQ What materials is this insert best suited for? The SNMG120404-MM5 WSM30S insert is optimised for stainless steels and heat‑resistant superalloys, where the Tiger‑tec Silver coating and WSM30S grade help manage heat and support reliable chip formation. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker produces short, controlled chips and contributes to consistent surface quality; together with the 0.4 mm corner radius it supports fine finishing and reduced built‑up edge. Is this insert compatible with standard SNMG toolholders? Yes, the SNMG format of this indexable insert fits holders made for SNMG‑type plates; correct clamping and sufficient toolholder rigidity are important to achieve the described performance. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases thermal stability and reduces adhesive wear on the cutting edge, extending tool life in demanding materials and improving process security. What operations are recommended for this insert geometry? The square 90° form and robust cutting edge make this insert suitable for facing and longitudinal turning where high edge strength and controlled chips are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SNMG120404-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP3 chipbreaker to secure consistent chip control and extended tool life; the combination of robust geometry and universal WPP20G grade keeps production reliable. Order the SNMG120404-MP3 WPP20G directly via Metav Werkzeuge or consult our specialists for cutting data and process recommendations. Drehwendeschneidplatte SNMG120404-MP3 WPP20G – indexable turning insert for Stahl | Walter Tools SNMG120404-MP3 WPP20G is a square 90° indexable insert engineered for general-purpose turning of Stahl, providing a balance of wear resistance and toughness via the Tiger·tec Gold coated carbide grade. Tiger·tec Gold coating for longer life MP3 chipbreaker for stable chip control Square 90° form for versatile turning Suitable for a wide range of Stahl applications Reliable coating technology for consistent productivity The Tiger·tec Gold coating on this insert is a coated carbide solution developed to improve wear resistance and process stability under the heat and stresses of turning. As a result, the tool sustains cutting edge integrity for longer intervals, reducing interruption for index changes and lowering overall tool consumption. The WPP20G grade is positioned as a universal option with an emphasis on balanced performance across mixed production runs, making it a pragmatic choice where repeatable cycle times and good surface finishes are required. Geometry and chip control that support efficient machining The square 90° shape and the MP3 chipbreaker deliver predictable chip formation and reliable cut evacuation in a variety of feed and depth combinations. The insert’s negative 0° rake and 0.4 mm corner radius provide a strong cutting edge for robust engagement, while the dimensional coding (size 12, thickness code 04) ensures compatibility with common toolholder systems. These geometric choices translate into fewer process disturbances and consistent component quality, particularly in medium-duty turning of unalloyed and alloyed Stahl. Application benefits and process guidance for the shop floor Designed for general turning of Stahl, this insert simplifies tool management by covering a broad material range without constant requalification. The moderate hardness and coating combination reduce the risk of sudden edge failure and support steady-state cutting parameters, which in turn helps maintain stable cycle times and surface integrity. For shops aiming to increase throughput while keeping setup complexity low, this grade and geometry provide a practical compromise between tool life and surface quality. For tailored cutting parameters and optimal tool selection for SNMG120404-MP3 WPP20G, contact Metav Werkzeuge with the SKU to receive application-specific recommendations and procurement assistance. Technical data SKU: SNMG120404-MP3-WPP20G-WALTER Article designation: SNMG120404-MP3 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Chipbreaker: MP3 Key measurements Plate size: 12 Thickness code: 04 Corner radius: 0.4 mm Rake angle: 0° (negativ) Shape: Square 90° Tolerance class: M Special features Coated carbide grade Tiger·tec Gold Designed for Stahl machining Robust geometry G Universal wear/toughness balance Suitable for general-purpose turning FAQ What materials is this insert suited for? The SNMG120404-MP3 WPP20G is specified for machining Stahl and is formulated to handle the heat and chip characteristics typical for that material group. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the SNMG120404-MP3 WPP20G promotes consistent chip formation and evacuation, reducing the likelihood of chip entanglement and improving process reliability during turning operations. Can the insert be used in finishing cycles? With its 0.4 mm corner radius and coated carbide construction, the insert supports a range of finishing and semi-finishing parameters; cutting data should be matched to the workpiece grade and desired surface quality. Which series and grade does this insert belong to? This product is part of the Tiger·tec Gold series and uses the WPP20G grade, offering a balanced combination of wear resistance and toughness for general turning of Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120408-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Die Vorteile von verschleißfester Tiger·tec Silver-Beschichtung und der stabilen FM5-Spanformergeometrie sorgen für sichere Spanbildung bei rostfreien Stählen und hitzebeständigen Legierungen; kombiniert mit der robusten square 90°-Form und 0.8 mm Eckenradius ergibt sich eine zuverlässige, produktive Zerspanung. Order the SNMG120408-FM5 WSM10S insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG120408-FM5 WSM10S indexable turning insert — for rostfreier Stahl and superalloys, Walter Tools A SNMG120408-FM5 WSM10S indexable turning insert engineered for heavy and heat‑generating turning operations on rostfreier Stahl and heat‑resistant superalloys, featuring Tiger·tec Silver coated carbide. Tiger·tec Silver coated WSM10S grade FM5 chipformer for secure chip control Square 90° insert, 0.8 mm corner radius High‑performance grade for demanding materials The coated carbide WSM10S in the Tiger·tec Silver series delivers wear resistance and thermal stability that benefits continuous and interrupted turning of rostfreier Stahl and nickel‑based alloys. The chosen grade supports a stable cutting edge, reducing build‑up and flank wear in applications where heat and adhesion threaten tool life. For production environments this means fewer insert changes and more consistent component quality, with predictable tool‑life behaviour that helps to plan maintenance intervals and minimise unplanned downtime. Geometry that secures chip control and prolongs edge life Built with the FM5 chipbreaker, this insert promotes controlled, short chips under typical turning conditions, which lowers the risk of surface damage and improves process safety. The square 90° configuration and 0.8 mm corner radius provide a strong cutting edge for heavier depths of cut, while the 0° negative clearance supports robust engagement in roughing applications. Together, these features enable reliable material removal and make the indexable insert suitable for use in demanding shop‑floor cycles where repeatability and secure chip evacuation are essential. Process reliability and shop‑floor productivity Combining a modern coating system with a proven chipformer yields tangible benefits for throughput and surface integrity: reduced rework, longer intervals between tool exchanges and consistent part finishes. The insert’s design also facilitates straightforward toolholder integration and fast index changes, lowering machine idle time. From short runs with frequent setups to serial production, this solution improves cycle time stability and contributes to cost‑effective manufacturing while maintaining component accuracy. For specific cutting data, application recommendations or to secure supply of the Walter Tools SNMG120408-FM5 WSM10S indexable turning insert for rostfreier Stahl machining, contact Metav Werkzeuge for tailored advice and rapid delivery options Technical data Article number: SNMG120408-FM5-WSM10S-WALTER Designation: SNMG120408-FM5 WSM10S Series: Tiger·tec Silver Grade: WSM10S Manufacturer: Walter Tools Product type: indexable turning insert Core data Corner radius: 0.8 mm Plate size: 12 Thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Chipbreaker: FM5 Applicable materials: S / M (rostfreier Stahl; heat‑resistant superalloys and titanium) Shape: Square 90° Finish/Execution: G FAQ Which materials is this insert intended for? The SNMG120408-FM5 WSM10S insert from Walter Tools is designed primarily for rostfreier Stahl and is also suitable for heat‑resistant superalloys and titanium when process parameters are matched to the workpiece. How does the FM5 chipformer affect machining performance? The FM5 chipformer on the SNMG120408-FM5 promotes secure, short chips and improves chip control, which enhances surface quality and reduces the likelihood of chip‑related interruptions during turning. What advantages does the square 90° shape offer? A square 90° insert provides four usable cutting edges, a robust corner for heavier cuts and good versatility in standard turning holders; the 0.8 mm corner radius increases edge strength for roughing operations. Is the WSM10S grade suitable for interrupted cuts? Yes, the WSM10S grade with Tiger·tec Silver coating is engineered for thermal stability and edge robustness, making it a dependable choice in interrupted cutting typical of rostfreier Stahl machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMG120408-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated FM5 chipformer and robust square geometry to secure stable cutting performance when machining challenging alloys; order via Metav Werkzeuge or consult our specialists for application advice. SNMG120408-FM5 WSM20S indexable turning insert by Walter Tools — Tiger·tec Silver, FM5 chipformer The SNMG120408-FM5 WSM20S is a square 90° indexable turning insert designed for demanding turning of rostfreier Stahl and heat‑resistant superalloys, offering a coated‑carbide grade for secure chip formation. Tiger·tec Silver coated carbide grade Optimised FM5 chipformer for chip control Square 90° geometry with 0.8 mm corner 0° negative rake for stable cutting forces Efficient grade for difficult materials and reliable edge life The WSM20S grade, developed within the Tiger·tec Silver series, is a coated carbide solution intended specifically for machining rostfreier Stahl and materials listed under ISO group S. The combination of a modern coating system and a carbide substrate improves thermal resistance and reduces wear, which results in more consistent tool life under cyclic thermal loads. For production environments facing workpiece adhesion and high heat generation, this insert supports secure chip formation and helps maintain a stable cutting edge, reducing unscheduled tool changes and improving overall process reliability. Geometry that prioritises stability and predictable cutting results A square 90° form with a 0.8 mm corner radius and a 0° (negative) rake angle provides a geometric basis for low vibration and strong edge support. The negative rake helps distribute cutting forces over a larger portion of the insert body, which is beneficial when tackling tough, sticky materials. Coupled with the FM5 chipbreaker, the insert offers controlled chip segmentation and evacuation, which lowers the risk of built‑up edge and promotes repeatable surface quality. These design choices translate directly into fewer stoppages and higher process uptime on CNC lathes. Practical advantages for machining shops and high‑duty applications Incorporating this insert into a turning strategy brings measurable productivity benefits: the coated grade extends productive cutting intervals and the chipformer reduces manual chip management, which together contribute to better cycle times and operator safety. The insert’s dimensions (12 mm plate size, thickness code 04) and the M tolerance class ensure compatibility with standard toolholders and predictable positioning for serial production. For plants processing rostfreie Werkstoffe and superalloys, the combination of coating, chip control and geometry supports both economic and technical targets — consistent part quality and reduced tooling overhead. For reliable turning of rostfreie Stahl and superalloys choose the Walter Tools SNMG120408-FM5 WSM20S insert — contact Metav Werkzeuge for application recommendations or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: SNMG120408-FM5-WSM20S-WALTER Designation: SNMG120408-FM5 WSM20S Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Facts Plate size: 12 mm Thickness code: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Form: Square 90° Tolerance class: M Material groups: S / M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipformer: FM5 Execution: G Coated carbide Suitable for: rostfreie Stahl and heat‑resistant superalloys FAQ Which materials is this insert intended for? The SNMG120408-FM5 WSM20S from Walter Tools is specified for rostfreie Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal resistance and edge stability for these demanding materials. What benefit does the FM5 chipformer provide? The FM5 chipformer produces controlled chip segmentation and improved evacuation, reducing the likelihood of built‑up edge and supporting consistent surface finish during continuous turning. How does the 0° negative rake influence machining? A 0° (negative) rake increases edge strength and distributes forces across the insert, which helps when cutting tough or adhesive materials by improving edge retention and reducing chipping. Is this insert suitable for high‑volume production? Yes — the combination of Tiger·tec Silver coating, a robust geometry and the FM5 chipbreaker is designed to deliver repeatable performance and longer intervals between indexings, supporting higher productivity in serial machining. Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are used for explanation only and do not imply any connection between our company and the listed manufacturers. The offered item is an original, brand‑new product from the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
SNMG120408-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the FP5 chipbreaker for dependable, long tool life and consistent chip control; the square SNMG geometry with a 0.8 mm corner radius ensures stable cutting in steel applications. Order the insert directly via Metav Werkzeuge or contact our consultants for cutting-data recommendations. Indexable turning insert SNMG120408-FP5 WPP10G by Walter Tools — Tiger·tec Gold coated, for steel SNMG120408-FP5 WPP10G is a Tiger·tec Gold‑coated indexable insert optimised for steel turning with an FP5 chipbreaker and a robust square SNMG 90° geometry Tiger·tec Gold coated, wear‑resistant grade WPP10G Square SNMG 90° geometry, 0.8 mm corner radius FP5 chipbreaker for reliable chip control Designed for steel machining, robust performance Extended life through premium grade and coating The combination of the WPP10G grade and the Tiger·tec Gold coating provides a clear edge in longevity and process stability for steel turning. The coated carbide substrate is formulated to resist abrasive and adhesive wear, which reduces the frequency of index changes and unplanned downtime. For production environments where consistent component quality and low tool consumption matter, this hardened coating supports longer intervals between tool changes while maintaining cutting-edge integrity. Stable cutting geometry for predictable results The square SNMG 90° form with a 0.8 mm corner radius delivers mechanical rigidity and repeatable engagement when turning steels. The 0° (negative) relief angle contributes to a robust cutting edge that tolerates heavier feeds and interrupted cuts without excessive edge chipping. Tolerance class M ensures reliable seat fitting in standard toolholders, translating into consistent run-out behaviour and predictable surface finish — important where dimensional repeatability is measured cycle after cycle. Predictable chip formation and process security The FP5 chipbreaker is engineered for controlled chip formation when machining steels, reducing the risk of long or tangled swarf and improving cycle safety. Controlled chips promote uninterrupted automation and easier chip evacuation from the work area, supporting higher material removal rates in many applications. The insert’s design therefore not only enhances operational reliability but also simplifies downstream handling and machine housekeeping. Clear application guidance and benefits for workshop use This coated insert is intended primarily for machining steel grades according to ISO group P, covering unalloyed and alloyed steels with a balance of wear resistance and toughness. The SNMG form is suited to a wide range of turning operations — from general roughing to finishing passes — where a solid, repeatable corner and dependable chip control are required. For specific cutting speeds and feeds, consult Metav Werkzeuge’s technical advisory to match toolholder geometry and machining parameters for optimal performance. Contact Metav Werkzeuge for tailored cutting-data advice on the Walter Tools SNMG120408-FP5 WPP10G and to discuss compatible toolholders and application optimisation Technical Data SKU: SNMG120408-FP5-WPP10G-WALTER Designation: SNMG120408-FP5 WPP10G Type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP10G Numbers / Core Technical Data Insert size: 12 mm Thickness: 4 mm Corner radius: 0.8 mm Relief angle: 0° (negative) Geometry: Square 90° Tolerance class: M Designs / Special features Chipbreaker: FP5 Coating technology: Tiger·tec Gold Substrate: coated carbide (WPP10G) Application group: steel (ISO P) Shape: SNMG120408 FAQ What steel types is this insert suitable for? This insert, the SNMG120408-FP5 WPP10G from Walter Tools, is designed for ISO P group steels, including unalloyed and alloyed steels commonly used in turning operations. How does the FP5 chipbreaker improve machining? The FP5 chipbreaker on the SNMG120408-FP5 produces controlled chip shapes during steel turning, improving process security and easing chip evacuation in automated or manual setups. Can the SNMG120408-FP5 be used for finishing passes? Yes, the square SNMG geometry with a 0.8 mm corner radius is suitable for both roughing and finishing, offering a balance between rigidity and surface‑finish capability. What does the Tiger·tec Gold coating deliver in practice? Tiger·tec Gold on the WPP10G grade enhances wear resistance and thermal stability, resulting in longer tool life and more consistent edge performance when machining steel. What does tolerance class M mean for toolholders? Tolerance class M indicates a standardised dimensional fit that supports predictable seating and run‑out behaviour in compatible toolholders for the SNMG120408 insert. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120408-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and a proven FP5 chipbreaker for reliable chip control and consistent productivity; order the SNMG120408-FP5 WPP20G insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG120408-FP5 WPP20G indexable turning insert — Tiger·tec Gold, 0° negative rake (Walter Tools) The SNMG120408-FP5 WPP20G is a square 90° indexable insert for turning steel, engineered to deliver stable cutting performance and predictable chip formation in serial production. Tiger·tec Gold coating for long tool life Universal grade optimised for steel cutting Square 90° form with 0.8 mm corner radius Negative 0° rake for stable cutting Consistent wear resistance for extended tool life The insert uses the Tiger·tec Gold coating and a WPP20G coated-carbide grade to resist abrasive wear and thermal loading when machining steel. The coating enhances heat protection and reduces flank wear, which leads to more predictable tool life and fewer interruptions on the shop floor. For operations where repeatability matters, the combination of coating and substrate provides a robust basis for longer cutting intervals and reduced tool-change frequency. Controlled chips and improved surface quality Equipped with the FP5 chipbreaker and a corner radius of 0.8 mm, the geometry supports reliable chip formation for common steel machining tasks. The chipbreaker is designed to break and evacuate chips efficiently in turn‑off operations, lowering the risk of chip jamming and facilitating smoother toolpaths. The modest corner radius balances strength and finish: it increases edge robustness while still enabling a good surface finish at typical feed rates for finishing and medium turning. Stable cutting geometry for industrial turning The insert’s square 90° shape and 0° negative rake give mechanical stability in facing and turning applications and help maintain dimensional control in interrupted cuts. Marked as SNMG120408-FP5 WPP20G, the designation follows industry norms for easy tool selection and inventory handling. The tolerance class M signals consistent manufacturing precision, supporting repeatable set-ups and predictable results across batches—an important factor for process planners and production managers who prioritise throughput and quality. Contact Metav Werkzeuge for tailored application advice or to secure SNMG120408-FP5 WPP20G inserts for immediate dispatch; specialists are available to recommend inserts, grades and cutting data for specific steel alloys Technical data Article number / SKU: SNMG120408-FP5-WPP20G-WALTER Designation: SNMG120408-FP5 WPP20G Product type: indexable turning insert Manufacturer: Walter Tools Numbers / Core technical data Size: 12 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness code: 04 Tolerance class: M Special features / Versions Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP5 Shape: Square 90° Applicable material group: P (steel) Series: Tiger‑tec Gold FAQ Which materials is this insert suited for? The SNMG120408-FP5 WPP20G insert by Walter Tools is specified for the material group P, i.e. a wide range of steels, and is optimised for the thermal and chip‑forming behaviour typical of steel turning. What advantages does the WPP20G grade offer? WPP20G is a Walter coated‑carbide grade within the Tiger·tec Gold family; it combines wear resistance and toughness to extend tool life and provide process stability when machining steel. What cutting tasks is the FP5 chipbreaker best for? The FP5 chipbreaker on this insert promotes controlled chip formation in turning operations on steel, improving evacuation and reducing the likelihood of chip interference in medium to finishing cuts. Is the insert suitable for interrupted cuts? The square 90° form and 0° negative rake provide mechanical strength suitable for interrupted turning where a stable cutting geometry is required. How does the corner radius affect performance? A corner radius of 0.8 mm enhances edge strength and helps maintain dimensional stability while still supporting good surface quality at standard finishing feeds. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product from the manufacturer.
SNMG120408-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of a proven combination of wear‑resistant Tiger·tec Silver grade and a reliable MK5 chipbreaker to maintain steady production when machining cast iron; order directly via Metav Werkzeuge or consult the team for application‑specific setup. SNMG120408-MK5 WKK10S – indexable turning insert for cast iron, Tiger·tec Silver by Walter Tools The SNMG120408-MK5 WKK10S is an indexable turning insert designed for robust machining of abrasive cast‑iron materials, combining a coated carbide grade with a chipforming geometry for controlled, repeatable cutting. Tiger·tec Silver coated grade WKK10S Optimised for cast iron machining MK5 chipbreaker for secure chip control Square 90° form with 0.8 mm corner radius Longer tool life through a wear‑resistant grade The Tiger·tec Silver WKK10S grade is a coated carbide formulation developed for abrasive environments typical of cast iron (ISO K). The coating and substrate combination increase resistance to flank and crater wear, which translates into longer intervals between index changes and fewer unplanned tool‑life stops. For production facilities focused on predictable cycle times, this means a measurable reduction in tool change frequency and improved process stability under repetitive loads. Predictable chip control and robust cutting performance Equipped with the MK5 chipbreaker and a square 90° geometry, this insert provides consistent chip control for breaking the short, brittle chips produced by cast iron. The 0° negative rake further enhances edge strength, allowing secure engagement during interrupted cuts and heavier depths of cut. The 0.8 mm corner radius supports robustness at the cutting edge, reducing the risk of micro‑chipping and helping to maintain surface quality with fewer tool index positions consumed. Streamlined integration for higher productivity As an indexable turning insert, the component can be fitted to standard turning holders, enabling quick replacement and minimised downtime. The combination of a proven coated grade and reliable chipbreaker supports continuous machining with repeatable results, contributing to overall productivity gains on the shop floor. By favouring stable chip formation and long tool life, the insert supports efficient resource allocation and a lower cost per finished component without sacrificing process reliability. Practical application guidance for cast‑iron operations This product is primarily intended for machining cast iron in accordance with the ISO K grouping; it is especially suitable where abrasive wear and short, breaking chips are expected. For operations requiring different material coverage or for optimised cutting data, consult application engineers to align cutting speeds and feeds with machine and workpiece constraints. The insert’s design balances wear resistance and toughness to deliver consistent performance across roughing and medium‑depth finishing passes in cast‑iron production. For machining tasks that demand consistent chip control and a durable cutting edge, contact Metav Werkzeuge to specify the Walter SNMG120408-MK5 WKK10S insert and receive tailored advice for process integration Technical data Article number: SNMG120408-MK5-WKK10S-WALTER Item designation: SNMG120408-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Execution: G Facts Insert form: Square 90° Size: 12 mm Thickness: 4 mm Corner radius: 0.8 mm Relief angle: 0° (negative) Chipbreaker: MK5 Tolerance class: M Special features Coated carbide grade Optimised for cast iron (ISO K) Designed for stable chip formation Robust edge for interrupted cuts FAQ What materials is this insert suitable for? The SNMG120408-MK5 WKK10S insert is optimised for cast iron (ISO K) applications and is formulated to manage the abrasive wear and short, breaking chips typical of such materials. How does the MK5 chipbreaker improve machining? The MK5 chipbreaker on this Walter insert promotes consistent chip segmentation and evacuation, which reduces the risk of entanglement and supports steady surface finish during continuous production. What does the designation SNMG120408-MK5 mean? The designation describes a square insert with a 90° geometry, 12 mm size and 4 mm thickness, fitted with the MK5 chipbreaker; the WKK10S suffix denotes the Tiger·tec Silver coated grade for cast iron. Is the insert suitable for interrupted cuts? Yes. The combination of a negative 0° rake, a 0.8 mm corner radius and a robust coated grade makes the insert resilient under interrupted cutting conditions commonly encountered in cast‑iron turning. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names mentioned are the property of their respective owners. References to brand names are for clarification only; there is no affiliation between our company and the named manufacturers. The offered article is an original, brand‑new product of the manufacturer.
SNMG120408-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, targeted chip control and a square 90° geometry for consistent turning of cast‑iron components; the coated carbide grade ensures dependable edge life in abrasive cast materials. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SNMG120408-MK5 WKK20S – indexable turning insert, cast‑iron grade, Walter Tools The SNMG120408‑MK5 WKK20S is a square indexable turning insert designed for productive machining of cast iron with a Tiger·tec Silver coated carbide grade. High-performance Tiger·tec Silver grade WKK20S Optimised for abrasive cast‑iron machining MK5 chipbreaker for controlled, short chips Square 90° geometry with 0.8 mm corner radius Consistent chip control and process stability for cast‑iron turning The WKK20S grade, developed within the Tiger·tec Silver series, is matched to the specific demands of cast iron (ISO group K). Thanks to the MK5 chipbreaker, the insert produces short, predictable chips that reduce downtime caused by chip entanglement and simplify extraction. The combination of a robust chipformer and a coated carbide substrate supports steady material removal rates even where abrasive graphite and interrupted cutting conditions are present, which directly contributes to higher process reliability and reduced scrap rates. Reliable wear resistance that extends productive tool life A coated cemented‑carbide construction provides wear protection against the abrasive nature of cast components. The coating system and substrate pairing in this series aim at stable flank and crater wear behaviour, yielding repeatable edge life on serial operations. The 0° relief angle (negative rake) and 0.8 mm corner radius ensure a strong cutting edge and resistance to chipping in interrupted cuts. These features help maintain dimensional consistency and surface quality across longer tool cycles, improving the cost‑efficiency of turning operations. Simple integration and clear specification for tool planning The square 90° insert form with the designation SNMG120408‑MK5 fits standard toolholders for this geometry and allows straightforward replacement in existing tool assemblies. Specified to tolerance class M, the insert delivers predictable seating and repeatability in indexable tool systems. Data such as size, chipbreaker type and grade enable process planners to compare alternatives quickly and select cutting parameters that match machine capabilities and cycle requirements. The clear alignment with ISO material group K supports correct tool selection for cast‑iron workpieces. Contact Metav Werkzeuge for tailored application advice, availability and to secure genuine Walter Tools SNMG120408‑MK5 WKK20S turning inserts for industrial use Technical data SKU: SNMG120408-MK5-WKK20S-WALTER Designation: SNMG120408-MK5 Product type: Indexable turning insert Facts Insert size: 12 Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Square 90° Chipbreaker: MK5 Grade: WKK20S Series: Tiger·tec Silver Tolerance class: M Execution: G Special features Coated cemented carbide (beschichtetes Hartmetall) Optimised for cast‑iron machining (ISO group K) Designed for abrasive wear and short, breaking chips Stable cutting edge for interrupted cuts Suitable for productive and repeatable turning operations FAQ What materials is this insert suitable for? The SNMG120408‑MK5 WKK20S from Walter Tools is optimised for cast iron (ISO group K); the grade and chipbreaker are tuned to handle abrasive cast materials and short, breaking chips. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker delivers controlled, short chip formation that improves chip evacuation and reduces risk of chip interference, supporting more stable machining cycles with this insert. Can the insert withstand interrupted cuts and tough cutting conditions? Yes. The negative 0° relief angle together with a 0.8 mm corner radius provide a robust cutting edge that resists chipping in interrupted cuts, improving edge life under demanding conditions. Is this grade part of a recognised series and what does that mean? The insert belongs to the Tiger·tec Silver series; this denotes a coated carbide technology designed for consistent wear resistance and process stability in production environments. Which insert designation should be ordered to match this item? Order the SNMG120408‑MK5 WKK20S indexable turning insert (Walter Tools) to ensure the correct size, chipbreaker and grade for cast‑iron turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Walter Tools and related designations are mentioned for product identification and explanation only. There is no affiliation between Metav Werkzeuge and the named trademark owners. The offered item is an original, factory‑new product of Walter Tools.
SNMG120408-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and a stable chip-forming geometry to ensure reliable machining of rostfreier Stahl; the combination of a robust coated carbide grade and dedicated chipbreaker delivers consistent surface quality and longer tool life. Order the insert directly through Metav Werkzeuge or consult their specialists for application support. SNMG120408-MM5 WMP20G turning insert — Tiger·tec Gold coating for rostfreier Stahl, Walter Tools The SNMG120408-MM5 WMP20G is a square 90° indexable turning insert designed for medium to robust machining of rostfreier Stahl, offering a combination of a coated carbide grade and a dedicated MM5 chipbreaker for secure chip control. Tiger·tec Gold coated carbide, grade WMP20G Optimised for rostfreier Stahl machining Square 90° form with 0.8 mm corner radius 0° negative rake with MM5 chipbreaker Longer service life through advanced coating technology The insert uses the Tiger·tec Gold coating system on a WMP20G coated carbide substrate, engineered to resist work-hardening and maintain a stable cutting edge under the thermal and mechanical stresses typical of rostfreier Stahl machining. The coated surface reduces flank wear and supports heat dissipation, which translates into fewer indexings and extended tool life. In production terms, this means improved process economy and less downtime for tool changes, while preserving dimensional stability of turned components. Reliable chip control and consistent surface finish With the MM5 chipbreaker and a square 90° format, the geometry promotes predictable chip formation and evacuation when facing and light turning stainless steels. The 0.8 mm corner radius balances edge strength and finish capability, reducing edge chipping while enabling acceptable surface finishes without aggressive feed rates. The 0° negative rake provides a secure cutting edge for interrupted cuts or harder zones in rostfreier Stahl, improving operational reliability in mixed-production environments. Seamless integration into production workflows The insert’s familiar SNMG format simplifies toolholder selection and inventory management across turning lines. Coated carbide and the Tiger·tec Gold technology support higher cutting parameters compared with uncoated grades, which can shorten cycle times and improve throughput. Where consistent part quality is a priority, this insert contributes to reproducible results and stable process windows, making it suitable for batch production and job-shop settings that demand predictable performance. For process-oriented turning with Walter Tools’ Tiger·tec Gold technology, request the SNMG120408-MM5 WMP20G from Metav Werkzeuge and benefit from their application advice and fast delivery options. Technical data Article number: SNMG120408-MM5-WMP20G-WALTER Product: SNMG120408-MM5 WMP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Size: 12 mm Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Design & special features Grade: WMP20G Chipbreaker: MM5 Coating/substrate: Tiger·tec Gold, coated carbide Insert form: Square 90° Suitable material group: rostfreier Stahl FAQ What materials is this insert suitable for? The SNMG120408-MM5 WMP20G is specified for rostfreier Stahl and is engineered to handle the toughness and heat generation typical of stainless steels. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WMP20G grade enhances wear resistance and thermal stability, which supports longer edge life and more consistent component quality during stainless steel turning. Which chipbreaker is fitted and what is its role? The insert features the MM5 chipbreaker, designed to promote controlled chip formation and reliable evacuation in a range of turning conditions. Is the insert suitable for interrupted cuts? Yes; the 0° negative rake and robust grade make the insert well suited to interrupted cutting and mixed-condition turning where edge security is important. How should toolholders be selected for this insert? Standard SNMG-compatible toolholders with appropriate clamping for square 90° inserts are recommended; ensure holder geometry supports the 0° relief and desired cutting parameters. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Walter Tools is a brand of Walter AG and part of the Sandvik group Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
SNMG120408-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from a combination of durable Tiger‑tec Silver coating, reliable MM5 chip control and robust square geometry for continuous productivity in rostfreier Stahl turning. Order the SNMG120408-MM5 WMP20S directly via Metav Werkzeuge or ask our consultants if needed. SNMG120408-MM5 WMP20S indexable turning insert — Tiger‑tec Silver, 0° negative, for rostfreier Stahl — Walter Tools A SNMG120408-MM5 WMP20S indexable turning insert engineered for secure chip formation and consistent edge life in medium to robust rostfreier Stahl machining applications. Tiger‑tec Silver coated grade WMP20S Optimised MM5 chipbreaker for secure chips Square 90° form, 0.8 mm corner radius Suitable for rostfreier Stahl machining Improved productivity through consistent chip control The combination of the Tiger‑tec Silver coating and the WMP20S carbide grade delivers tangible gains in tool life and process stability when machining rostfreier Stahl. The insert’s MM5 chipbreaker is engineered to promote short, controllable chips, reducing the risk of built-up edge and improving surface finish. This translates into fewer tool changes and more efficient cycle times on CNC lathes, making the insert a rational choice for operations that prioritise throughput and repeatability. Secure geometry for repeatable results and stable set‑up The insert’s square 90° shape and 0.8 mm corner radius offer sturdy cutting edges that are forgiving under heavier engagement angles, while the 0° negative relief supports a secure seat in standard tool holders. The robust geometry contributes to reproducible part quality and stable clamping, reducing vibration and the need for frequent re‑indexing. These attributes help maintain consistent tolerances across production batches and simplify process planning for turning operations. Application focus and brand reliability for demanding conditions Designed primarily for rostfreier Stahl, the grade is intended for medium to robust cutting conditions where heat generation and material toughness challenge lesser grades. As an indexable turning insert from Walter Tools, the component benefits from the manufacturer’s focus on process security and long wear life. Selection of this insert supports a balance between performance and cost-efficiency, particularly where predictable edge behaviour and efficient chip control matter most. For expert guidance on integrating the SNMG120408-MM5 WMP20S into production or to discuss suitable tooling systems, contact Metav Werkzeuge for tailored recommendations and fast availability. Technical Data Article number: SNMG120408-MM5-WMP20S-WALTER SKU: SNMG120408-MM5-WMP20S-WALTER Product type: Drehwendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Silver Grade: WMP20S Facts Insert size: 12 mm Thickness code: 04 Corner radius: 0.8 mm Relief angle: 0° negative Insert shape: Square 90° Chipbreaker: MM5 Tolerance class: M Special features Coated carbide grade Tiger‑tec Silver Optimised for rostfreier Stahl Suitable for medium to robust cutting conditions Designed for secure chip formation and stable cutting edges FAQ Which materials is this insert intended for? The SNMG120408-MM5 WMP20S insert is designed primarily for machining rostfreier Stahl and performs well under medium to robust cutting conditions. How does the MM5 chipbreaker affect cutting performance? The MM5 chipbreaker on the SNMG120408-MM5 WMP20S promotes controllable, short chips and supports stable cutting when working with rostfreier Stahl. What are the key geometry features to consider for tooling set‑up? The square 90° form with a 0.8 mm corner radius and a 0° negative relief ensure a secure seat and robust cutting edges for repeatable turning operations with the SNMG120408-MM5 WMP20S. Is this insert suitable for heavy interrupted cuts? The WMP20S grade combined with the insert’s geometry is intended for medium to robust conditions; suitability for heavy interrupted cuts should be evaluated against specific machine and workpiece parameters. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original factory-new goods from the manufacturer.
SNMG120408-MM5 WMP30G WMP30G Wendeplatten - Walter Tools
Benefit from the combination of the WMP30G Tiger·tec Gold coating, the MM5 chipbreaker, and a 0° negative rake with 0.8 mm corner radius for reliable machining of stainless steel under medium to robust conditions. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMG120408-MM5 WMP30G – Square 90° turning indexable insert, 0° negative rake, for stainless steel (Walter Tools) The SNMG120408-MM5 WMP30G is a square 90° indexable insert designed for medium to robust turning operations on stainless steel, combining a Tiger·tec Gold coated grade with a dedicated MM5 chipbreaker for improved process stability. Tiger·tec Gold coated carbide grade WMP30G Square 90° form with 0.8 mm corner radius 0° negative rake for stable cutting edges Optimised chip control MM5 for stainless steel Reliable performance for demanding stainless steel operations The Tiger·tec Gold WMP30G grade is a coated carbide formulation engineered for the specific challenges of stainless steel: high toughness, tendency to form built-up edge and elevated cutting temperatures. The Tiger·tec Gold coating increases thermal resistance and wear behaviour, which translates into longer cutting life and fewer tool changes. In practical terms, the insert helps to maintain consistent component quality and reduces the risk of edge failure during medium to robust machining cycles, supporting higher machine utilisation and predictable throughput. Geometry and edge strength that extend tool life The insert’s square 90° form, combined with a 0.8 mm corner radius, provides a robust cutting edge that balances strength and surface finish. The 0° negative rake increases edge security in heavy cross-sections and interrupted cuts by reducing the effective rake angle and distributing cutting forces more favourably across the carbide substrate. This geometry also helps to avoid premature chipping in tougher stainless steel grades. The standard thickness designation ensures stable clamping and repeatable positioning in common turning toolholders, contributing to repeatable results and reduced rework. Predictable chip control and process security on the shop floor Chip formation is governed by the MM5 chipbreaker, which is optimised for the stringier chips typical of stainless steel. Controlled chip segmentation reduces the chance of entanglement and improves coolant access to the cutting zone, resulting in better surface integrity and fewer stoppages for chip clearing. Walter Tools’ series design and coating technology also support consistent edge integrity during longer production runs, improving overall process security and lowering the total cost of operation through extended intervals between indexings. For applications involving stainless steel, request the SNMG120408-MM5 WMP30G Tiger·tec Gold insert from Metav Werkzeuge or contact the Metav technical team for tailored machining recommendations. Technical Data Article number: SNMG120408-MM5-WMP30G-WALTER Designation: SNMG120408-MM5 WMP30G Product type: Turning indexable insert Facts Corner radius: 0.8 mm Plate size: 12 mm Thickness designation: 04 Free cutting angle: 0° (negative) Special features Grade: WMP30G (Tiger·tec Gold, coated carbide) Chipbreaker: MM5 Plate form: Square 90° Application: stainless steel Series: Tiger·tec Gold FAQ What materials is the insert suitable for? The SNMG120408-MM5 WMP30G insert is optimised for stainless steel; the WMP30G grade and MM5 chipbreaker are selected to manage the heat and toughness typical of these materials. How does the 0° negative rake affect cutting performance? A 0° negative rake increases edge robustness and reduces the risk of chipping during heavy or interrupted cuts; the geometry of the SNMG120408-MM5 WMP30G supports secure cutting edges in demanding stainless steel applications. Which chip behaviour can be expected with the MM5 chipbreaker? The MM5 chipbreaker is designed for controlled segmentation when machining stringy stainless steel, improving evacuations and reducing chip-related interruptions with the SNMG120408-MM5 WMP30G insert. Is the insert part of a coated carbide series? Yes, the SNMG120408-MM5 WMP30G belongs to the Tiger·tec Gold series, a coated carbide range that enhances wear resistance and thermal stability in production environments. What form and corner radius does the insert have? The insert is a square 90° form with a 0.8 mm corner radius, offering a balance between edge strength and surface finish for turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120408-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of thermal resistance, edge stability and controlled chip formation to secure consistent turning results in demanding materials; order genuine Walter Tools inserts through Metav Werkzeuge or consult our specialists for toolholder pairing and process optimisation. SNMG120408-MM5 WSM10S indexable turning insert (Tiger·tec Silver) by Walter Tools — 0° negative, 0.8 mm corner radius The SNMG120408-MM5 WSM10S is an indexable turning insert designed for heavy-duty and semi-finishing turning of stainless steels and heat-resistant superalloys where thermal load and edge stability determine process reliability Tiger·tec Silver coating for high thermal resistance WSM10S grade for stainless steels and superalloys Square 90° shape with 0.8 mm corner radius 0° negative geometry with MM5 chipbreaker Stable machining of stainless steels and superalloys for predictable productivity The combination of Tiger·tec Silver coating and the WSM10S carbide grade delivers high thermal resistance and a stable cutting edge in materials that tend to work-harden and form built-up edge. In practice, this means fewer unplanned tool changes and a more consistent surface finish when machining groups M and S according to ISO 513. The chemistry and layered coating technology reduce flank wear and help maintain cutting performance under elevated temperatures, supporting a higher process security and prolonged tool life. Robust geometry for cut control and surface quality The square 90° shape and 0.8 mm corner radius offer a balance between edge strength and achievable surface finish, making the insert suitable for heavier engagement as well as controlled semi-finishing passes. The 0° negative geometry enhances edge toughness and allows conservative rake behaviour that resists chipping under interrupted cuts. The MM5 chipbreaker is engineered to shape chips reliably in tough-to-machine alloys, reducing the risk of long, entangling swarf and improving evacuation — a direct benefit for stable cycle times and reduced machine interruptions. Practical integration to save machine time and costs As an SNMG-format insert within the Tiger·tec Silver series, the component fits into established toolholder systems for indexed turning. The tolerance class M supports repeatable seat accuracy for predictable repositioning, which shortens set-up time during insert changes. Taken together, the coated grade and chip control reduce total machining costs by extending edge life and lowering scrap risk, while the square insert format enables flexible use across roughing and finishing operations in production environments. For process-critical turning of stainless steels and superalloys, contact Metav Werkzeuge to source genuine Walter Tools SNMG120408-MM5 WSM10S inserts and to discuss optimal toolholder pairings — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG120408-MM5-WSM10S-WALTER Designation: SNMG120408-MM5 WSM10S Product type: Drehwendeschneidplatte / indexable turning insert Series: Tiger-tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Free angle: 0° (negative) Corner radius: 0.8 Plate shape: Square 90° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Chipbreaker: MM5 Coating: Tiger·tec Silver Material suitability: S / M (superalloys, stainless steels) Execution / geometry code: G FAQ Which materials is this insert suited for? The SNMG120408-MM5 WSM10S by Walter Tools is formulated for stainless steels (ISO group M) and heat-resistant superalloys (ISO group S), offering thermal stability and controlled chip formation in these groups. What does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM10S grade increases thermal resistance and wear behaviour, helping the SNMG120408-MM5 insert retain a stable cutting edge under high cutting temperatures and extending usable edge life. How does the insert geometry aid heavy cutting? The square 90° format combined with 0.8 mm corner radius and 0° negative geometry produces a tough edge that withstands interrupted cuts; the MM5 chipbreaker further ensures dependable chip control during aggressive machining. Is the SNMG120408-MM5 WSM10S suitable for finishing stainless steel? Yes; depending on the cutting parameters and toolholder selection, the Walter Tools SNMG120408-MM5 WSM10S can achieve a consistent surface finish while providing process robustness through its coated grade and edge geometry. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; www.walter-tools.com; info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120408-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coated carbide grade and a robust square geometry for consistent performance when machining stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult the technical team for application support. SNMG120408-MM5 WSM20S – Indexable turning insert, Tiger‑tec Silver for stainless steels (Walter Tools) The SNMG120408-MM5 WSM20S is a square, 90° indexable turning insert designed for heavy‑duty applications on stainless steels and heat‑resistant superalloys, providing a coated carbide solution for stable chip formation and extended edge life Tiger‑tec Silver coated carbide for longevity Optimised for stainless steels and superalloys Square 90° form with 0.8 mm corner radius Negative rake 0° for robust cutting edge Consistent performance on demanding materials The WSM20S grade, built on Tiger‑tec Silver coating technology, targets difficult‑to‑machine materials where heat generation and work‑hardening are common. The coated carbide layer improves thermal stability and wear resistance, which supports more reliable chip control and reduces the risk of built‑up edge. For production environments, this means fewer unplanned index changes and a more predictable service life under cyclic loads. Geometry that prioritises edge strength and repeatability A square 90° insert with a 0.8 mm corner radius and negative rake 0° creates a geometry that favours edge robustness and repeatable dimension control. The negative rake increases the effective edge support, making the insert particularly suitable for interrupted cuts and heavy feed conditions, while the moderate corner radius balances strength with the ability to maintain surface finish. This geometry reduces vibration sensitivity and helps ensure consistent component tolerances over longer tool life. Process security and efficiency in series production Selecting this insert supports enhanced process security through a stable cutting edge and controlled chip formation. The combination of grade and geometry helps maintain cutting‑edge integrity when machining stainless steels and heat‑resistant alloys, which are known for poor thermal conductivity and high tool loading. The result is higher productivity, reduced downtime for tool changes and more predictable maintenance planning—advantages that translate directly into lower unit costs in batch and continuous production. Clear applicability and easy integration into tool systems The insert is supplied in the SNMG format and features the MM5 chipbreaker, which is tuned for the intended material groups ISO group M (stainless steels) and ISO group S (heat‑resistant superalloys and titanium). This classification clarifies which workpiece materials are appropriate and helps with tool‑holder selection and machining strategy. As a Walter Tools product, the insert integrates into standard turning toolholders for SNMG‑style components and is suitable where stable edge life is required alongside predictable chip evacuation. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Silver inserts and ensure the SNMG120408‑MM5 WSM20S is matched to the right holder and cutting data for optimal results; eMail: info@metav-werkzeuge.com – Tel: +49 2822 7131930 Technical Data SKU: SNMG120408-MM5-WSM20S-WALTER Article designation: SNMG120408-MM5 Product type: Indexable turning insert (drehwendeschneidplatte) Grade / sort: WSM20S Series: Tiger‑tec Silver Brand: Walter Tools Execution: G Tolerance class: M Facts Size: 12 Thickness: 04 Corner radius: 0.8 mm Free angle (rake): 0° (negative) Special features Chipbreaker: MM5 Shape: Square 90° Material compatibility: stainless steels, heat‑resistant superalloys (ISO groups M and S) Coating: Tiger‑tec Silver coated carbide Intended use: robust machining, secure chip formation, industrial turning applications FAQ What materials is this insert suitable for? The SNMG120408‑MM5 WSM20S is optimised for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and controlled chip formation for these challenging materials. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WSM20S grade increases wear resistance and thermal stability, helping to maintain a stable cutting edge and improve productivity under elevated temperatures typical when machining stainless steels and superalloys. What effect does the 0.8 mm corner radius have on results? A 0.8 mm corner radius provides a compromise between edge strength and surface finish: it strengthens the cutting edge for heavy cuts while still permitting acceptable surface quality and dimensional repeatability. Is the negative rake angle suitable for interrupted cuts? Yes, the negative rake 0° increases edge support and robustness, which is advantageous for interrupted cuts and heavy feed conditions where shock loading can occur. Which chipbreaker is supplied and what is its purpose? The insert comes with the MM5 chipbreaker, which is designed to control chip flow for the targeted material groups, reducing the likelihood of long, tangled chips and improving machining safety. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMG120408-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Combine high thermal resistance with a stable cutting edge and a reliable chip control geometry to maintain productivity on hard-to-machine alloys and rostfreier Stahl; the certified Tiger·tec Silver grade ensures consistent performance. Order genuine Walter Tools inserts through Metav Werkzeuge or request tailored application advice from our consultants. SNMG120408-MM5 WSM30S indexable turning insert – Walter Tools (Tiger·tec Silver, MM5 chipbreaker) SNMG120408-MM5 WSM30S is a square, negative insert designed for tough turning tasks on rostfreier Stahl and heat-resistant superalloys and titanium Tiger·tec Silver coating for thermal stability Optimised for rostfreier Stahl and superalloys Negative 0° rake for robust cutting action MM5 chipbreaker for reliable chip control High-performance grade for demanding materials The WSM30S grade from the Tiger·tec Silver family combines a wear-resistant substrate with a multi-layer coating designed to withstand elevated temperatures. This translates into longer tool life and fewer insert changes when machining materials that tend to work-harden or generate heat, such as rostfreier Stahl and superalloys. The specialised coating improves heat resistance and reduces adhesive wear, which helps to maintain a stable cutting edge during interrupted or continuous cuts. For production environments, the result is a more predictable tool lifecycle and reduced downtime. Geometry that protects the edge and controls chips The insert’s MM5 chipbreaker and negative 0° rake deliver controlled chip formation and a robust cutting geometry that resists chipping under heavy engagement. The square 90° form with a corner radius of 0.8 mm offers a balance between edge strength and surface finish capability: the radius supports heavy cuts while still allowing acceptable component quality. The term "negative 0°" indicates a stable rake face arrangement that favours rigidity and shock resistance, making this insert suitable for medium to heavy turning where edge security is essential. Practical advantages for workshop and production use As an indexable turning insert with the SNMG designation, the item permits quick index changes, reducing setup time and keeping machines productive. The designation SNMG120408-MM5 indicates the standardised geometry and size coding used across toolholders, enabling compatibility with a wide range of clamping systems. The series: Tiger·tec Silver and grade WSM30S are tailored for applications where consistent surface results and extended cutting intervals are required. Where process consistency and repeatable quality matter, this insert supports efficient machining of challenging materials. Contact Metav Werkzeuge for application guidance, availability and to source genuine Walter Tools SNMG120408-MM5 WSM30S inserts for your specific turning operations Technical Data SKU: SNMG120408-MM5-WSM30S-WALTER Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Core specifications Size code: 12 Thickness code: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Shape: Square 90° Chipbreaker: MM5 Tolerance class: M Features & applications Coating system: Tiger·tec Silver (coated carbide) Material suitability: S / M (superalloys, rostfreier Stahl) Typical use: Heavy-duty and difficult-to-machine materials Designation: SNMG120408-MM5 WSM30S Product purpose: Turning of rostfreier Stahl, heat-resistant superalloys and titanium FAQ What materials is this insert suitable for? The SNMG120408-MM5 WSM30S insert is suitable for rostfreier Stahl and heat-resistant superalloys and titanium, reflecting the grade’s focus on thermal stability and edge strength. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on the Walter Tools SNMG120408-MM5-MM5 WSM30S provides consistent chip control and helps to avoid long, stringy chips when turning rostfreier Stahl and similar materials. Can the SNMG120408-MM5 be indexed during production to reduce downtime? Yes, as an indexable turning insert the SNMG120408-MM5 WSM30S allows rapid indexing to a fresh cutting edge, supporting continuous production with minimal interruption. What benefit does the Tiger·tec Silver series provide? Tiger·tec Silver coating on the WSM30S grade offers improved heat resistance and wear performance, which helps to extend tool life and maintain consistent machining results on demanding materials. Is the negative 0° geometry more robust than positive rake options? The negative 0° arrangement used on the SNMG120408-MM5 WSM30S prioritises edge strength and shock resistance, making it preferable for heavier cuts and interrupted turning where stability is essential. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
SNMG120408-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold performance and the MP3 chipbreaker for consistent chip control in steel turning; the combination of robust coating and precise geometry ensures steady production and longer tool life — order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG120408-MP3 WPP10G Turning Indexable Insert – Tiger·tec Gold for Steel – Walter Tools The SNMG120408-MP3 WPP10G is a square 90° turning indexable insert designed for reliable machining of steel, combining a wear-resistant grade with a specialised chipbreaker for stable turning operations. Tiger·tec Gold coated carbide for long life MP3 chipbreaker for stable chip control Square 90° form with 0.8 mm corner radius Optimised for machining steel (ISO P) Consistent cutting performance through advanced coating and geometry The SNMG120408-MP3 WPP10G is engineered to deliver consistent cutting performance in steel turning. The Tiger·tec Gold technology provides a coated carbide surface that resists abrasive wear and thermal loads, which translates into longer tool life and fewer index changes. Combined with the MP3 chipbreaker, the insert ensures predictable chip formation and evacuation under the heat and pressures typical for ISO P materials. This geometry reduces interruptions and supports higher material removal rates while maintaining dimensional control. Predictable results for steel applications and simplified process planning Designed specifically for ISO P (steel) groups, the insert’s square 90° form and 0.8 mm corner radius create a stable cutting edge that is suited to a wide range of turning tasks—from roughing to medium finishing. The negative 0° rake contributes to a robust cutting edge, improving resistance to edge chipping when cutting tougher steel grades. For process planning, these features mean fewer unexpected interruptions and a straightforward setup: select the appropriate cutting parameters for steel, rely on the MP3 chipformer for chip control, and expect reproducible surface quality across production batches. Economic and operational benefits for workshop productivity Using a wear-resistant grade like WPP10G results in measurable productivity gains through extended tool life and reduced tool handling. The insert’s combination of coating and chip control leads to fewer tool changes and more stable cycle times, which supports efficient spindle utilisation and lower overall operating costs per component. The design also enables operators to maintain consistent surface finish and dimensional accuracy, which contributes to reduced rework and higher first-pass yield. For companies seeking reliable process performance, the insert supports both productivity and part quality in routine turning operations. Contact Metav Werkzeuge to discuss Walter Tools SNMG120408-MP3 WPP10G and identify the optimal insert parameters for steel machining Technical data Article number: SNMG120408-MP3-WPP10G-WALTER Name: Drehwendeschneidplatte SNMG120408-MP3 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (turning indexable insert) Series / Grade: Tiger·tec Gold / WPP10G Facts Insert size: 12 mm Corner radius: 0.8 mm Thickness: 4 mm Free rake: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MP3 Plate form: Square 90° Grade designation: WPP10G Execution: G Suitable material group: Steel (ISO P) Series notes: WPP10G designed for steel machining, offering a balance of wear resistance and toughness FAQ What materials is this insert suited for? The SNMG120408-MP3 WPP10G is optimised for steel (ISO P); the grade and coating are tuned for the heat and chip behaviour typical of unalloyed and alloyed steels. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker promotes controlled chip formation and evacuation, improving process stability and helping to prevent built-up edge during turning of steel. What are the dimensional features of the insert? Key dimensions include a 12 mm size, a 0.8 mm corner radius and a 4 mm thickness, with a square 90° configuration and a negative 0° rake angle. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new merchandise from the manufacturer, Walter Tools.
SNMG120408-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, universal suitability for steel, and the compact 12 mm square format to maintain productive turning operations; order the insert via Metav Werkzeuge or consult their advisors for application support. SNMG120408-MP3 – SNMG120408-MP3 WPP20G (WPP20G) turning insert for steel, Tiger‑tec Gold – Walter Tools SNMG120408-MP3 WPP20G is a square indexable turning insert engineered for reliable steel machining in general turning operations, combining a robust geometry with a Tiger‑tec Gold coated grade for extended service life. Tiger‑tec Gold coating for long tool life MP3 chipbreaker for reliable chip control 12 mm square 90° format, 0.8 mm nose radius 0° negative rake for robust cutting forces Consistent productivity for steel turning The combination of the WPP20G grade and Tiger‑tec Gold coating delivers a balance of wear resistance and toughness specifically tuned for steel (ISO P) machining. The coated carbide chemistry reduces flank wear and sustains cutting performance over longer cycles, which translates into fewer tool changes and higher machine uptime. With a tolerance class M and a compact 12 mm square form, the insert provides consistent seating and repeatability in standard toolholders, supporting predictable component quality in serial production. Reliable chip control and stable edge life Equipped with the MP3 chipbreaker, the insert enables controlled chip formation across a range of cutting parameters common in steel turning. The 0° negative rake and 0.8 mm nose radius support robust cutting forces and good surface finish while reducing the risk of edge chipping under interrupted cuts. These geometric choices mean the indexable insert copes well with mixed turning tasks where a compromise between strength and surface quality is required, enhancing process reliability and reducing scrap rates. Practical integration and machining benefits The insert’s square 90° format and nominal thickness support straightforward toolholder selection and quick index changes during set‑ups. The coated grade’s universal character for steel makes it suitable for a wide spectrum of unalloyed and alloyed steels; selection of cutting data can therefore focus on optimising feed and speed rather than compensating for rapid wear. For production environments pursuing stable cycle times, the result is improved cost per part through extended tool life and fewer interruptions for regrinding or replacement. For application advice on Tiger‑tec Gold inserts or to source Walter Tools turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical Data SKU: SNMG120408-MP3-WPP20G-WALTER Article: SNMG120408-MP3 WPP20G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Geometry: Square 90° Insert size: 12 mm Nose radius: 0.8 mm Thickness: 04 Rake angle: 0° (negative) Chipbreaker: MP3 Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Material suitability: Steel (ISO P) Robust edge for interrupted cuts Universal grade for a wide range of steels FAQ What materials is this insert suitable for? The SNMG120408-MP3 WPP20G insert is specified for steel (ISO P); the WPP20G grade and Tiger‑tec Gold coating target common unalloyed and alloyed steels. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation in turning operations, improving process stability and surface quality when machining steel. What advantages does the 0° negative rake provide? A 0° negative rake increases edge robustness and resistance to mechanical shock, which benefits interrupted cuts and heavy‑duty turning where a stronger cutting edge is required. Is this insert suitable for finishing and roughing? The universal character of the WPP20G grade supports both finishing and moderate roughing in steel; selection of feed and cutting speed should reflect the desired surface finish and tool life balance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120408-MP3 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger·tec Gold coated grade and an MP3 chipbreaker for consistent performance in Stahl turning; the 0.8 mm corner radius and square 90° form deliver robust edge strength for demanding operations. Order the SNMG120408-MP3 WPP30G insert directly via Metav Werkzeuge or consult our technical team for application advice. SNMG120408-MP3 WPP30G – Indexable turning insert for Stahl, Tiger·tec Gold by Walter Tools The SNMG120408-MP3 WPP30G is a square 90° indexable insert in the Tiger·tec Gold series, designed for productive and reliable turning of Stahl components in industrial machining. Tiger·tec Gold coating for long tool life MP3 chipbreaker optimised for Stahl machining 0.8 mm corner radius for robust edge strength Square 90° form, 12 mm inscribed circle Extended tool life through Tiger·tec Gold technology The coated carbide grade from the Tiger·tec Gold series, designated WPP30G, is formulated for a broad range of Stahl applications and engineered to resist wear under the thermal and mechanical loads typical of turning. As a result, the cutting edge offers extended life and predictable performance, reducing tool-change frequency and supporting higher productivity. The combination of coating and grade provides a balance between wear resistance and toughness, making the insert suitable for stable high-volume production. Secure chip control and stable cutting under load The MP3 chipbreaker is optimised for controllable chip formation when machining Stahl, improving evacuation and reducing the risk of chip-related interruptions. The insert’s 0° (negative) rake angle enhances edge stability in heavier turning operations, while the 0.8 mm corner radius provides a reinforced cutting edge that tolerates intermittent cuts and slight tool engagements. Together these features support consistent surface quality and reduced rework. Predictable integration and dimensional reliability Dimensional conformity is ensured by tolerance class M, enabling reliable indexability and interchangeability in standard toolholders. The insert’s 12 mm inscribed circle and 4.0 mm thickness match common holder specifications, so the component can be integrated into existing tool sets with minimal adjustment. Suitability for ISO group P (Stahl: unalloyed and alloyed) is confirmed by the grade selection, delivering consistent process results in serial production and one-off machining alike. For application guidance, sample requests or to discuss how the Tiger·tec Gold SNMG120408-MP3 WPP30G insert fits specific Stahl turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert technical advice and rapid delivery coordination. Technical Data SKU: SNMG120408-MP3-WPP30G-WALTER Designation: SNMG120408-MP3 WPP30G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: MP3 Form: Square 90° Size (inscribed circle): 12 mm Thickness: 4.0 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Facts Inscribed circle / size: 12 mm Thickness: 4.0 mm Corner radius: 0.8 mm Rake angle: 0° Tolerance class: M Special features Tiger·tec Gold coating WPP30G coated carbide grade Suitable for Stahl (ISO group P) MP3 chipbreaker for controlled chips Square 90° form Negative rake angle for edge stability Tolerance class M for interchangeability FAQ Which materials is this insert intended for? The SNMG120408-MP3 WPP30G is intended for Stahl machining and is optimised for unalloyed and alloyed Stahl in accordance with ISO group P. How does the MP3 chipbreaker affect machining performance? The MP3 chipbreaker on the SNMG120408-MP3 WPP30G promotes controlled chip formation when machining Stahl, improving evacuation and reducing the likelihood of chip-related interruptions. Is the insert suitable for interrupted cuts? Yes, the 0.8 mm corner radius and the negative rake angle increase edge robustness, making the insert appropriate for applications with occasional interruptions. What dimensional data should be checked before ordering holders? Check the inscribed circle (12 mm), thickness (4.0 mm) and the square 90° form to ensure compatibility with the chosen toolholder and clamping system. What does tolerance class M mean for production use? Tolerance class M indicates medium dimensional tolerance, supporting reliable indexability and predictable performance when replacing inserts in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNMG120408-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold-coated wear resistance, precise MP5 chip control and a robust square 90° geometry for reliable steel turning and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. SNMG120408-MP5 WPP10G — Indexable turning insert for steel, Tiger·tec Gold (Walter Tools) SNMG120408-MP5 WPP10G is an indexable turning insert designed for efficient turning of steels with a Tiger·tec Gold coated grade and an MP5 chipbreaker for stable chip control Tiger·tec Gold coating for long tool life Optimised MP5 chipbreaker for stable chips Square 90° geometry with 0° negative rake 0.8 mm corner radius for robust cutting edges Longer tool life through advanced coating technology The Tiger·tec Gold coating and the WPP10G grade provide a hard, wear-resistant surface on a coated cemented carbide substrate, specifically optimised for machining steel (ISO P). This combination reduces flank wear and maintains a stable cutting edge under thermal load, which translates into fewer tool changes and higher process uptime. By selecting a coated grade engineered for the heat and chip formation typical of steel turning, tool life is extended while maintaining repeatable performance and dimensional control. Consistent chip control and surface finish for production work The integrated MP5 chipbreaker and the square 90° insert form deliver predictable chip formation, even in interrupted cuts. The 0° negative rake geometry increases edge strength, enabling heavier feed rates while preserving surface integrity. The moderate 0.8 mm corner radius balances edge robustness with achievable surface finish, giving reliable results in batch production and single-part setups alike. Clear chip control reduces rework and helps maintain machine cleanliness and operator efficiency. Practical advantages for workshop and production environments Built for universal application in the ISO P group, this insert suits unalloyed and alloyed steels across a range of operations from roughing to finishing. The square format provides four usable corners, improving indexable life per insert and lowering tooling costs per part. With a tolerance class suitable for general turning tasks and a geometry that supports robust engagement, the insert contributes to predictable cycle times and easier tool management on tool holders that accept SNMG-format inserts. For machining steel components with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored tooling advice and reliable supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: SNMG120408-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte SNMG120408-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Core specifications Insert size: 12 mm Corner radius: 0.8 mm Free cutting angle: 0° (negative) Thickness: 04 Tolerance class: M Special features Coating/grade: Tiger·tec Gold (WPP10G) Chipbreaker: MP5 Shape: Square 90° Application: Steel (ISO P) Substrate: Coated cemented carbide Series: Tiger·tec Gold Execution: G FAQ What materials is this insert intended for? The SNMG120408-MP5 WPP10G insert is optimised for steel machining (ISO P) and designed to handle the heat and chip formation typical of unalloyed and alloyed steels. How does the MP5 chipbreaker benefit machining? The MP5 chipbreaker on this Walter Tools insert improves chip control and reduces the risk of long, entangling chips, resulting in cleaner machining and more consistent surface quality. Can the insert be indexed to use multiple cutting edges? Yes, the square 90° format provides multiple usable corners; the geometry allows cost-efficient indexing to extend the usable life of each insert. Does the Tiger·tec Gold coating improve tool life? The Tiger·tec Gold coating and the WPP10G grade increase wear resistance and maintain cutting-edge integrity under thermal load, offering longer service life in steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory-new merchandise of the manufacturer.
SNMG120408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WPP20G grade and the precise MP5 chipbreaker to secure stable cutting results in steel machining; order directly via Metav Werkzeuge or ask the technical consultants for application support. SNMG120408-MP5 WPP20G — Turning insert for steel machining (Tiger‑tec Gold) by Walter Tools A SNMG120408-MP5 WPP20G indexable turning insert engineered for steel (ISO group P) applications, featuring a square 90° geometry, 0° negative clearance and an MP5 chipbreaker for controlled chip formation. Tiger‑tec Gold coated grade WPP20G Optimised for steel machining (P) Square 90° insert with 0.8 mm corner radius MP5 chipbreaker for reliable chip control Increased process reliability and predictable performance The Tiger‑tec Gold WPP20G grade combines a coated carbide substrate with a tailored coating stack to deliver consistent performance when turning steels. This results in stable chip formation and prolonged edge life under typical steel cutting temperatures. The square 90° geometry inherently supports robust cutting conditions and repeatable positioning, which reduces downtime for index changes and contributes to a smoother production flow. Precise chip control and surface quality with MP5 The integrated MP5 chipbreaker is designed to manage chip flow for a broad range of feed and depth-of-cut combinations commonly used in steel turning. By breaking chips reliably, the insert minimises the risk of entanglement and machine stoppages, while the combination of chipbreaker and grade supports good surface finish on the workpiece. For operators unfamiliar with chipbreaker terminology: MP5 denotes a medium-profile breaker optimised for general steel applications. Geometry and clearance tailored for robust applications A 0.8 mm corner radius on a square 90° insert offers a balance between edge strength and achievable surface finish; larger radii increase edge robustness, while the square form allows for multiple effective cutting corners before indexing. The 0° negative clearance provides a stable cutting edge orientation for heavy roughing passes and interrupted cuts, reducing the likelihood of edge chipping when machining tougher sections of steel components. Practical selection for steel machining and shop-floor benefits The insert is specified for ISO group P (steel), which covers unalloyed and alloyed steels; this classification helps in selecting cutting parameters and coolant strategy. The designation and tolerance class M ensure interchangeability and predictable fitting in standard SNMG toolholders. For manufacturers seeking a productive, versatile solution, this indexable insert supports efficient batch production and consistent results across series‑production runs. Contact Metav Werkzeuge for tailored advice on applying Walter Tools Tiger‑tec Gold inserts in specific steel operations — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: SNMG120408-MP5-WPP20G-WALTER Designation: SNMG120408-MP5 WPP20G Product type: Turning insert (indexable) Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: MP5 Facts Insert size: 12 mm Corner radius: 0.8 mm Thickness: 4.0 mm Clearance angle: 0° (negative) Tolerance class: M UID / SKU: SNMG120408-MP5-WPP20G-WALTER Special features Coated carbide grade (Tiger‑tec Gold technology) Optimised for ISO group P (steel) Square 90° plate form Robust chip control via MP5 breaker Suitable for general and productive turning operations FAQ What materials is this insert suitable for? The SNMG120408-MP5 WPP20G insert is formulated for ISO group P, which designates steel (including many alloyed and unalloyed steels). How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes reliable chip control in a wide range of feeds, reducing the risk of chip entanglement and supporting consistent surface quality. Is the corner radius suitable for roughing applications? Yes, the 0.8 mm corner radius provides enhanced edge strength for tougher cutting conditions while still allowing acceptable surface finish for many roughing and semi-finishing passes. Can the insert be used in interrupted cuts? The square geometry combined with a 0° negative clearance increases edge support, making this insert well suited to interrupted cuts commonly encountered in steel workpieces. How is the SNMG120408-MP5 WPP20G identified when ordering? The full designation SNMG120408-MP5 WPP20G (Walter Tools) identifies the insert, grade and chipbreaker configuration for correct toolholder matching. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer Walter Tools.
SNMG120408-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of a coated-carbide grade engineered for productive turning of Stahl and the reliable chip control of the MP5 breaker; this combination delivers consistent surface finish and extended tool life. Order directly via Metav Werkzeuge or contact the consultants for tailored cutting data and batch availability. SNMG120408-MP5 WPP30G (SNMG120408-MP5) indexable turning insert – WPP30G for Stahl, Tiger‑tec Gold, Walter Tools The SNMG120408-MP5 WPP30G is a square 90° indexable turning insert designed for robust, high-productivity turning of Stahl, featuring the Tiger‑tec Gold coating and an MP5 chipbreaker for controlled swarf evacuation. Tiger‑tec Gold coating for high wear resistance WPP30G grade optimised for Stahl machining MP5 chipbreaker for reliable chip control Square 90° insert, 0.8 mm corner radius High-performance wear resistance for efficient Stahl turning The Tiger‑tec Gold technology delivers a coated carbide surface that combines hardness and thermal stability, reducing flank wear under typical turning temperatures. As a result, the insert sustains cutting edge integrity for longer cycles, which increases machine uptime and reduces tool-change frequency. The WPP30G grade is tailored for the cutting behaviour of Stahl, providing a balanced compromise between wear resistance and toughness so that interrupted cuts and variable feed rates remain manageable without premature edge chipping. Geometry and chip control that improve process stability A square 90° shape with a 0.8 mm corner radius creates a robust cutting edge that tolerates moderate depths of cut while maintaining dimensional stability. The integrated MP5 chipbreaker forms predictable chips and helps avoid stringing or hazardous swarf in common turning operations. The insert’s 0° free rake (negative) geometry contributes to a stable cutting action at higher feed rates and supports consistent surface quality on turned components, particularly where reliable chip evacuation and repeatable part finish are priorities. Practical benefits for workshop productivity and tool planning Tolerance class M ensures reproducible seating and repeatable insert positioning in standard toolholders, simplifying inventory planning and changeover procedures. Because the grade and coating are optimised specifically for Stahl, cutting parameters can be standardised across similar batches, lowering setup time and helping to predict tool life more accurately. The combination of predictable wear behaviour and a reliable chipforming geometry leads to measurable improvements in throughput and process security on serial production and jobbing alike. Application scope and integration into existing setups The insert is suited for a wide range of turning tasks on Stahl, from roughing to medium finishing where durability matters. Compatibility with common SNMG toolholders makes retrofitting straightforward, and the insert series is part of a broader Tiger‑tec Gold portfolio that supports consistent performance across diverse turning operations. For shops seeking a cost-effective route to more productive turning, this insert provides a pragmatic balance of durability, chip control and dimensional reliability. For reliable, high-productivity turning with Walter Tools' Tiger‑tec Gold technology, contact Metav Werkzeuge to confirm suitability for specific Stahl grades and to arrange supply or technical consultation: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: SNMG120408-MP5-WPP30G-WALTER Product: Indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP30G ISO designation: SNMG120408-MP5 WPP30G Core data Insert size: 12 Plate thickness: 04 Corner radius: 0.8 mm Insert shape: Square 90° Free rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: MP5 Material application: Stahl Execution: G Sort: WPP30G FAQ What materials is this insert suited for? The SNMG120408-MP5 WPP30G is specifically designed for machining Stahl and is optimised for the thermal and chipforming behaviour typical of steel turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on the SNMG120408-MP5 promotes consistent chip segmentation and easy evacuation, which supports uninterrupted production and safer handling of swarf. Is this insert compatible with standard SNMG toolholders? Yes, the SNMG120408-MP5 geometry and tolerance class M allow use in common SNMG toolholder systems, enabling straightforward integration into existing setups. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP30G grade enhances wear resistance and thermal stability, extending tool life and maintaining surface finish under demanding cutting conditions. Can this insert be used for finishing operations? The combination of a square 90° form and a 0.8 mm corner radius makes the insert suitable for medium finishing; for fine finishing, parameter adaptation and appropriate feed reduction are recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120408-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP10G grade for consistently productive steel machining; the MU5 chipbreaker and 0° negative rake deliver stable chip control and a robust cutting edge. Order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120408-MU5 WPP10G – Indexable turning insert for steel, Tiger‑tec Gold, Walter Tools SNMG120408-MU5 WPP10G is a square indexable turning insert designed for reliable steel machining across a wide range of production tasks Tiger‑tec Gold coating for high productivity WPP10G grade optimised for steel machining MU5 chipbreaker for stable chip control Square 90° form with 0.8 mm corner radius Consistent productivity and process reliability for steel components The combination of the Tiger‑tec Gold coating and WPP10G grade provides a balance of wear resistance and toughness that supports continuous production. Coated carbide technology reduces flank wear and maintains a stable cutting edge, which translates into longer tool life and fewer insert changes during shifts. Designed specifically for the demands of machining steel, this turning insert helps to secure reproducible component quality and reduces cost per part through extended performance windows. Controlled chip formation and secure cutting geometry in roughing and finishing With the MU5 chipbreaker and a 0° negative rake, the insert promotes predictable chip flow and effective heat management under typical steel cutting conditions. The square 90° shape and 0.8 mm corner radius enable robust engagement for face and shoulder turning while still delivering acceptable surface finishes. Operators benefit from reduced rework and easier chip evacuation, lowering the risk of machine downtime and contributing to safer, cleaner machining environments. Easy integration into production and clear application scope The insert conforms to the SNMG geometry, simplifying program setup and machine integration. As a coated carbide indexable insert, it is compatible with standard toolholders and cutting parameters for this insert family. The grade is classified for steel machining according to ISO group P, covering unalloyed and alloyed steels; this classification aids process planning and quick selection when switching jobs or materials on the shop floor. Practical benefits for workshop efficiency and maintenance planning By choosing this insert, purchasing and process engineers gain a tool that supports predictable maintenance intervals and straightforward inventory management. The balanced wear behaviour of WPP10G reduces the variability in tool life across batches, enabling more accurate cost calculations per component. For production managers aiming to improve throughput with minimal process change, the insert’s geometry and grade provide a pragmatic route to higher uptime and constant results. For tailored application advice or to request genuine Walter Tools SNMG120408-MU5 WPP10G inserts, contact Metav Werkzeuge for a personalised recommendation and rapid availability information. Technical data SKU: SNMG120408-MU5-WPP10G-WALTER Label: Drehwendeschneidplatte SNMG120408-MU5 WPP10G Walter Tools Type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: MU5 Relief angle: 0° (negative) Shape: Square 90° Size: 12 (mm) Corner radius: 0.8 (mm) Thickness: 04 (mm) Tolerance class: M Material designation: P (steel application) ISO designation: SNMG120408-MU5 WPP10G Internal ID: SNMG120408-MU5-WPP10G-WALTER Facts Coating: Tiger‑tec Gold Material of insert: Coated carbide Application group: Steel (ISO P) Geometry: SNMG, square insert, negative rake Typical use: Turning, face and shoulder operations Special features Optimised for stable chip formation in steel Balanced wear resistance and toughness Suitable for a broad range of steel grades Compatible with standard SNMG toolholders FAQ What materials is this insert suitable for? The SNMG120408-MU5 WPP10G is formulated for machining steels; the WPP10G grade and Tiger‑tec Gold coating are optimised for ISO P materials. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this Walter Tools insert promotes reliable chip control and easier evacuation when turning steel components, supporting consistent surface quality. Can this insert be used for both roughing and finishing? Yes, the combination of a 0° negative rake, square 90° shape and 0.8 mm corner radius allows the insert to perform effectively across tougher roughing cuts and controlled finishing operations. Which toolholders are compatible with this insert geometry? Standard SNMG holders designed for square 90° inserts accept the SNMG120408-MU5 WPP10G; tool clamping and seat geometry must match the SNMG family. How does Tiger‑tec Gold coating benefit production? Tiger‑tec Gold coating increases wear resistance and thermal stability, which results in longer tool life and more predictable tool-change intervals for Walter Tools turning grades. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com