SNMG120412-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WSM10S grade for consistent edge stability and secure chip control when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or contact our consultants for application support. SNMG120412-MM5 WSM10S turning insert for stainless steels and superalloys — Walter Tools SNMG120412-MM5 WSM10S is an indexable turning insert designed for heavy and demanding machining of stainless steels and heat‑resistant superalloys, featuring a square 90° geometry and a 0° negative rake for robust cutting performance Tiger‑tec Silver coating technology Optimised for stainless steel and superalloys Square 90° insert, 1.2 mm corner radius 0° negative rake for heavy interrupted cuts Reliable cutting in tough materials through coating and grade selection The combination of Tiger‑tec Silver and the WSM10S coated carbide grade offers improved thermal resistance and edge stability, which directly reduces the risk of built‑up edge when machining austenitic stainless steels and nickel‑based alloys. As an indexable insert, it provides repeatable geometry after each index, so tool management in production remains efficient. The coating's balanced hardness and toughness enable stable chip formation, leading to consistent surface finish and fewer unplanned tool changes. Geometry designed for strength and versatility The square 90° geometry and 1.2 mm corner radius create a robust cutting edge that resists chipping during heavy cutting and interrupted operations. The 0° negative rake increases cutting edge support and makes the insert suitable for higher feed rates and applications where rigidity is limited. These geometric choices translate into longer tool life and predictable component quality in serial production, particularly in shoulder turning and roughing passes. Practical benefits for process reliability and productivity Using this insert in production helps to maintain cycle times while lowering scrap rates thanks to its resistance to thermal softening and wear. The MM5 chipbreaker is tuned for secure evacuation of chips typical of sticky, work‑hardening materials, which reduces the likelihood of recutting and improves surface integrity. Together with the coated carbide base, the design supports sustained cutting performance that contributes to process stability and lower overall machining costs in demanding applications. For machining tasks requiring dependable edge life and consistent chip control, request the Walter Tools SNMG120412-MM5 WSM10S through Metav Werkzeuge or contact our technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical Data Article number: SNMG120412-MM5-WSM10S-WALTER Designation: SNMG120412-MM5 WSM10S Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Material groups: S / M Facts Insert size: 12 mm Corner radius: 1.2 mm Thickness: 4 mm Relief angle: 0° negative Shape: Square 90° Tolerance class: M Execution: G Special features Coated carbide indexable insert Chipbreaker: MM5 Suitable for stainless steels (M) and heat‑resistant superalloys / titanium (S) Stable chip control and edge stability Designed for heavy cuts and interrupted machining FAQ What materials is this insert best suited for? The SNMG120412-MM5 WSM10S is optimised for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S) thanks to the Tiger‑tec Silver coating and the WSM10S grade. Does the insert support roughing and finishing operations? Yes, the square 90° shape and 1.2 mm corner radius provide strength for roughing, while the coated grade and chipbreaker maintain surface integrity for semi‑finishing passes. How does the 0° negative rake affect cutting? A 0° negative rake gives a more supported cutting edge, improving stability for higher feed or interrupted cuts and reducing the risk of chipping under heavy loads. Is the chip control suitable for sticky, work‑hardening stainless steels? The MM5 chipbreaker is designed to promote secure chip formation and evacuation in challenging, sticky materials, lowering recutting and improving process reliability. Can this insert be indexed for extended tool life? As an indexable turning insert, the SNMG120412-MM5 WSM10S can be rotated to present a fresh cutting edge, supporting predictable tool life management and reduced tool change frequency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand Walter Tools) is part of the worldwide leading manufacturers of precision tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the mentioned manufacturers.
SNMG120412-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S grade and a robust MM5 chipbreaker for consistent performance in rostfreier Stahl machining; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120412-MM5 WSM20S — Turning indexable insert, Tiger·tec Silver coating, 1.2 mm corner radius — Walter Tools The SNMG120412-MM5 WSM20S is a square turning insert engineered for heavy-duty turning of rostfreier Stahl and heat-resistant superalloys, offering a stable cutting edge and secure chip formation in demanding environments. Tiger·tec Silver coating for high process security WSM20S grade for rostfreie Stähle and superalloys Square 90° form with 1.2 mm corner radius Negative 0° rake for robust engagement Improved process reliability for difficult-to-cut alloys The coated carbide grade WSM20S delivers stable performance when machining rostfreier Stahl and temperature-resistant alloys. Thanks to the Tiger·tec Silver technology, the insert resists thermal softening and maintains edge stability under elevated cutting temperatures. This results in fewer unexpected tool changes and more predictable cycle times, which supports higher machine utilisation and reduced production interruptions. Precision chip control and surface quality Equipped with the MM5 chipbreaker and a square 90° geometry, the insert promotes secure chip formation and controlled evacuation, reducing the risk of built-up edge and preventing workpiece damage. The 1.2 mm corner radius helps achieve consistent surface finish while providing the mechanical strength needed for interrupted cuts. These features together enable both improved part quality and a reduction in rework for time-critical jobs. Robust geometry for heavy engagement and repeatability The negative 0° rake and proven substrate design give the insert a high resistance to flank and crater wear during sustained heavy cutting. The combination of coated hardmetal and a stable cutting edge is ideal for operations where repeatable results and long insert life are required. Specified tolerance class M ensures consistent interchangeability and process reproducibility across toolholders and batches. Application guidance and practical benefits This insert is suited for turning applications involving rostfreier Stahl as well as selected superalloys and titanium depending on component geometry. The SNMG120412-MM5 format fits common ISO toolholders for versatile setup options. When paired with correct cutting parameters and appropriate coolant strategy, the result is efficient metal removal, improved tool life and a measurable reduction in unplanned downtime. For application support, availability and ordering of Walter Tools turning inserts please contact Metav Werkzeuge GmbH directly at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and fast delivery options Technical data Article number: SNMG120412-MM5-WSM20S-WALTER SKU: SNMG120412-MM5-WSM20S-WALTER Label: Drehwendeschneidplatte SNMG120412-MM5 WSM20S Walter Tools Facts Plate form: Square 90° Plate size: 12 Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: MM5 Grade: WSM20S Series: Tiger·tec Silver Thickness: 04 Tolerance class: M Execution: G Special features Coating: Tiger·tec Silver Suitable for: rostfreier Stahl (M) Designed for: heat-resistant superalloys and titanium (S) Application: Robust turning, heavy engagement, interrupted cuts Manufacturer: Walter Tools FAQ What materials is this insert recommended for? The SNMG120412-MM5 WSM20S turning insert is recommended primarily for rostfreier Stahl and, depending on geometry, for heat-resistant superalloys and titanium due to its WSM20S grade and Tiger·tec Silver coating. Which chipbreaker is fitted and what benefit does it bring? The insert features the MM5 chipbreaker, which promotes secure chip formation and evacuation, reducing built-up edge and improving surface finish during continuous and interrupted turning. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating increases thermal resistance and edge stability, helping the insert maintain cutting performance under higher temperatures and extending effective tool life in demanding operations. Is this insert compatible with standard ISO toolholders? Yes, the SNMG120412-MM5 format conforms to common ISO dimensions for indexable turning inserts, allowing use with standard compatible toolholders for flexible setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision metalworking tools and forms part of the Swedish Sandvik group. Brand names and trademarks are the property of their respective owners. The offered item is an original factory-new product of the manufacturer.
SNMG120412-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Combining the thermal resilience of the Tiger·tec Silver coating with the MM5 chipbreaker and a robust 1.2 mm corner radius, this insert ensures stable cutting edges and predictable tool life when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. SNMG120412-MM5 WSM30S — turning indexable insert, Tiger·tec Silver (Walter Tools) A SNMG120412-MM5 WSM30S turning indexable insert designed for stainless steel and heat‑resistant alloy machining, offering 90° square geometry and a 1.2 mm corner radius for robust performance Tiger·tec Silver for thermal stability MM5 chipbreaker for stable chips 90° square geometry for general turning 1.2 mm corner radius for robust edge High-performance cutting for difficult materials The SNMG120412-MM5 WSM30S insert is engineered to deliver consistent productivity in demanding tasks. The Tiger·tec Silver coating provides elevated thermal resistance and wear protection, which supports extended tool life when machining stainless steel and materials from ISO group S (heat‑resistant superalloys and titanium). By combining a coated cemented carbide grade with an optimised substrate, the insert limits built‑up edge and heat‑related flank wear, resulting in fewer tool changes and a steadier machining process in serial production environments. Consistent chip control and improved surface quality A purpose‑designed MM5 chipbreaker and the 0° (negative) relief promote controlled chip formation even under heavy cutting conditions. The square 90° form and 1.2 mm corner radius create a mechanically robust cutting edge that resists chipping and maintains dimensional stability; this reduces vibration and helps produce a finer surface finish without aggressive process tuning. Where interrupted cuts or variable material batches occur, the geometry supports predictable behaviour and simplifies process parameter selection. Ease of integration and predictable cycle times The insert’s familiar indexable format and tolerance class M enable reliable repeatability in turret systems and automated tool stations. With clearly defined dimensional data and a widely used mounting geometry, toolsetters and CAM programmers can incorporate the SNMG120412-MM5 WSM30S into production routines with minimal adjustment. The result is improved uptime, consistent part quality and a lower total cost of machining through fewer unplanned interventions and reproducible cutting performance. For application support, availability and recommendations on using the Walter Tools SNMG120412-MM5 WSM30S in stainless steel and superalloy machining, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG120412-MM5-WSM30S-WALTER Article name: Drehwendeschneidplatte SNMG120412-MM5 WSM30S Walter Tools Brand: Walter Tools Series: Tiger-tec Silver Facts Insert size: 12 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Shape: Square 90° Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM30S Chipbreaker: MM5 Applicable materials: stainless steel; heat‑resistant superalloys and titanium (ISO group S) Material designation: S / M Execution: G ISO designation: SNMG120412-MM5 WSM30S FAQ What materials is this insert best suited for? The SNMG120412-MM5 WSM30S is optimised for stainless steel and is also suited to heat‑resistant superalloys and titanium (ISO group S), thanks to the Tiger·tec Silver coating and the grade’s thermal resilience. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on this Walter Tools insert promotes short, controllable chips and supports stable cutting forces, which leads to improved surface finish and fewer interruptions for chip removal. Can the insert withstand interrupted cuts and heavy engagement? The square 90° geometry combined with a 1.2 mm corner radius provides a robust cutting edge capable of handling intermittent cuts and higher radial depths while maintaining edge stability. Is this insert compatible with automated turret systems? Yes. The SNMG120412-MM5 WSM30S conforms to common indexable insert geometries and tolerance class M, enabling straightforward integration into turret‑based production with repeatable positioning. Which coating and grade features support longer tool life? The Tiger·tec Silver coating and the WSM30S grade are designed to resist heat and wear in demanding applications, offering predictable tool life and consistent machining outcomes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names belong to their respective owners. The mentioned brand is cited for clarification only; there is no affiliation between our company and the referenced brand. The offered item is an original, factory‑new product from the manufacturer.
SNMG120412-MP3 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the MP3 chipbreaker for consistent chip control and the robust square 90° geometry to raise productivity in steel turning operations. Order inserts through Metav Werkzeuge or consult their technical team for cutting data and application advice. SNMG120412-MP3 WPP10G — indexable turning insert, Tiger·tec Gold, for steel machining — Walter Tools The SNMG120412-MP3 WPP10G is a coated carbide indexable turning insert designed for reliable steel machining, offering a square 90° form and a robust edge geometry for demanding finishing and medium-facing operations. Tiger·tec Gold coated carbide grade WPP10G Square 90° geometry with 1.2 mm corner radius MP3 chipbreaker for stable chip control Negative 0° rake for robust cutting edge Maximise metal-removal rates with a wear-resistant grade The Tiger·tec Gold grade WPP10G delivers a balance of wear resistance and toughness tailored to steel machining. As a coated carbide solution, the grade is formulated to withstand the heat and continuous abrasion typical when machining unalloyed and alloyed steel, which results in longer tool life and fewer indexings. For production environments seeking higher throughput, the combination of a modern coating system and a wear-optimised substrate reduces flank wear and helps maintain consistent component tolerances over longer tool cycles. Predictable chip formation and surface quality from the MP3 geometry The MP3 chipbreaker is engineered to produce short, controllable chips across a range of feeds and depths of cut. Because the insert features a square 90° plate form with a 1.2 mm corner radius, it delivers a stable support zone for the cutting edge, improving surface finish while limiting vibration. The negative 0° rake increases cutting-edge strength and is especially advantageous in interrupted cuts or when robustness is required. In practice, these design choices translate to fewer tool changes, better machine uptime and a more consistent component surface after finishing passes. Process security and repeatability for series production With a tolerance class M and execution G, this insert supports reproducible clamping and predictable wear progression in automated and manual lathes. The SNMG120412-MP3 WPP10G benefits from a proven insert geometry that simplifies grade selection and cutting data transfer between machines, aiding process planners to standardise settings. The result is improved productivity through reduced set-up time and reliable batch-to-batch consistency. For operations aiming to reduce overall machining cost, the improved tool life and stable performance contribute to a favourable cost-per-part metric. Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger·tec Gold inserts or request specific process sheets and sample comparisons Technical Data Article number: SNMG120412-MP3-WPP10G-WALTER Label: Drehwendeschneidplatte SNMG120412-MP3 WPP10G Walter Tools Type: indexable turning insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: MP3 Plate form: square 90° Facts Size: 12 mm Corner radius: 1.2 mm Thickness: 04 Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade material: coated carbide Material application: steel (P) Execution: G Series: Tiger-tec Gold FAQ What materials is this insert suitable for? The SNMG120412-MP3 WPP10G is specified for machining steel (ISO group P); the WPP10G grade is optimised for the heat and chip characteristics of unalloyed and alloyed steel. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker on the SNMG120412-MP3 WPP10G promotes short, manageable chips and stable cutting under a variety of feeds, which supports safer automated chip evacuation and steady surface quality. When is the negative 0° rake advantageous? A negative 0° rake delivers a robust cutting edge on the SNMG120412-MP3 WPP10G, making it suitable for interrupted cuts, unstable setups or where increased edge strength reduces the risk of chipping. How does the 1.2 mm corner radius influence part finish? The 1.2 mm corner radius balances edge strength and surface finish: on the SNMG120412-MP3 WPP10G it helps achieve consistent surface quality while providing a supportive edge geometry that extends tool life. Is this insert suitable for automated production runs? Yes — the combination of Tiger·tec Gold grade and the MP3 geometry provides reproducible wear behaviour and process stability, making the SNMG120412-MP3 WPP10G a solid choice for series production. Manufacturer: Walter Tools (Walter AG); Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and do not imply any affiliation. The offered item is original, factory-new merchandise from the manufacturer.
SNMG120412-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPP20G grade for efficient, universal turning of Stahl; the MP3 chipbreaker and 1.2 mm corner radius provide consistent chip control and edge stability for productive series machining. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. SNMG120412‑MP3 WPP20G Turning indexable insert — Tiger·tec Gold, universal for Stahl — Walter Tools The SNMG120412‑MP3 WPP20G is a square 90° indexable insert designed for general turning applications in Stahl, combining a wear-resistant Tiger·tec Gold coating with an MP3 chipbreaker for reliable chip control in continuous and interrupted cuts. Tiger·tec Gold coating for long tool life Universal WPP20G grade for Stahl MP3 chipbreaker for consistent chip control 1.2 mm corner radius for robust cutting edge Higher throughput on Stahl thanks to optimised coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade delivers an excellent balance between wear resistance and toughness, which translates into longer service life and fewer index changes. Designed for the machining of Stahl according to ISO 513 group P, this insert supports typical heat and chip formation encountered during turning, so that cycle times can be reduced while maintaining dimensional stability. The grade’s universal character makes it suitable for a wide range of unalloyed and alloyed steels, enabling tool inventories to be simplified without sacrificing process reliability. Safer cutting, controlled chips and robust edge security Built with the MP3 chipbreaker and a 1.2 mm corner radius, the insert offers predictable chip formation and a sturdy cutting edge that tolerates moderate interruptions and edge wear. The 0° (negativ) relief angle increases mechanical strength at the cutting edge, which is particularly useful for heavier cuts or interrupted operations. Explained simply, the negative rake increases edge robustness at the cost of slightly higher cutting forces — a trade-off that benefits stability and repeatable surface finish in demanding production environments. Efficient integration on the shop floor and consistent quality The square 90° geometry and the SNMG designation provide four usable cutting corners per insert, improving cost-efficiency in serial production. Manufactured to tolerance class M, the insert ensures repeatable seating and axial runout when used with compatible toolholders. Selection of the SNMG120412‑MP3 WPP20G reduces setup variability and supports predictable tool-change intervals, contributing to leaner process flows and lower per-part tooling cost. For applications requiring guidance on toolholder pairing or cutting parameters, Metav Werkzeuge offers technical consultation to match the insert to the specific machining task. For production-driven turning with Walter Tools quality, contact Metav Werkzeuge for tailored advice and fast supply of SNMG120412‑MP3 WPP20G inserts — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMG120412‑MP3‑WPP20G‑WALTER Description: Drehwendeschneidplatte SNMG120412‑MP3 WPP20G Walter Tools Product type: Turning indexable insert Designation: SNMG120412‑MP3 WPP20G Series: Tiger‑tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 04 Corner radius: 1,2 Relief angle: 0° (negativ) Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: MP3 Shape: Square 90° Execution/grade: G Material application: Stahl Applicability: Designed for machining P (Stahl) according to ISO 513 Series and grade description: WPP20G — coated cemented carbide for universal Stahl machining FAQ What materials is this insert intended for? The SNMG120412‑MP3 WPP20G insert is intended for machining Stahl (ISO 513 group P); the WPP20G grade is optimised for the heat and chip characteristics of steels. What coating and grade does the insert use? The insert uses the Tiger·tec Gold coating and the WPP20G grade, providing a balance of wear resistance and toughness for universal turning. Which chipbreaker is fitted and what are the benefits? Equipped with the MP3 chipbreaker, the insert produces controlled chips and improves surface quality while reducing the risk of chip entanglement in continuous turning operations. What is the geometry and how many cutting edges are available? The geometry is square 90° (SNMG form), providing four usable cutting corners per insert to enhance tool economy. What is the corner radius and relief angle? The corner radius is 1,2 and the relief angle is 0° (negativ), offering a robust cutting edge suitable for interrupted cuts and heavier engagement. What tolerance and repeatability can be expected? Manufactured to tolerance class M, the insert offers repeatable seating and consistent positioning when used with compatible toolholders. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
SNMG120412-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MP5 chipbreaker combined with a square 90° geometry for consistent, productive Stahl machining; order the SNMG120412-MP5 WPP05G via Metav Werkzeuge or contact our consultants for tailored application support. SNMG120412-MP5 WPP05G indexable turning insert — Tiger·tec Gold, MP5 chipbreaker, for Stahl SNMG120412-MP5 WPP05G is a square 90° indexable insert designed for general turning of Stahl, offering high process stability and reliable chip control. Tiger·tec Gold coating for long tool life WPP05G grade optimised for Stahl machining MP5 chipbreaker for stable chip control Square 90° insert, 1.2 mm corner radius Increased throughput through consistent cutting performance The coated carbide grade WPP05G, part of the Tiger·tec Gold series, is tuned for turning operations in Stahl where consistent heat and typical chip formation patterns occur. The combination of the WPP05G substrate and the multi-layer gold coating reduces flank wear and stabilises the cutting process, which translates into longer indexable insert life and fewer changeovers. For production environments seeking predictable cycle times, the MP5 chipbreaker supports uniform chip segmentation, reducing interruptions and maintaining surface quality on workpieces. Reliable chip control and secure cutting geometry A square 90° insert with a 1.2 mm corner radius provides robust edge support and is particularly well suited to medium and finishing passes where a stable cutting edge is essential. The MP5 chipbreaker design channels chips efficiently, lowering the risk of entanglement and machine downtime. In practical terms, this means more consistent clawing-free operation and reduced manual interventions during unattended shifts. The neutral 0° rake (negative geometry) enhances edge strength for interrupted cuts and tougher Stahl grades. Practical benefits for workshop and production planning Choosing an indexable solution from a proven series minimises process variation and simplifies tooling logistics. The insert’s geometry and grade pairing are aimed at a broad range of general-purpose turning tasks on Stahl, allowing standardisation across tool holders and part families. This standardisation supports reduced tool inventories and easier training for machine operators, while the coating and chipbreaker enable higher cutting parameters in many cases, improving overall shop productivity without compromising component quality. For recommendations on optimising cutting parameters or for assistance with toolholder matching, contact Metav Werkzeuge — our specialists will advise on the best application of this Walter Tools insert for specific Stahl grades and machining tasks. Technical Data SKU: SNMG120412-MP5-WPP05G-WALTER Article designation: SNMG120412-MP5 WPP05G Product type: Indexable turning insert (square 90°) Brand: Walter Tools Facts Size: 12 Corner radius: 1.2 Relief angle: 0° (negative) Insert thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP05G Chipbreaker: MP5 Geometry: Square 90° Application: Stahl (P) — unalloyed and alloyed steels FAQ What materials is this insert suitable for? The SNMG120412-MP5 WPP05G is intended for machining Stahl (P) — suitable for unalloyed and alloyed steel grades according to the supplied specification. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP05G grade improves wear resistance and thermal stability, enabling longer tool life and more consistent results in turning applications. Which chip control can be expected with the MP5 chipbreaker? The MP5 chipbreaker delivers controlled segmentation and evacuation of chips, reducing the likelihood of chip-related stoppages and facilitating unattended operation. Is the insert geometry suitable for interrupted cuts? The square 90° geometry with a 1.2 mm corner radius and a 0° relief angle provides strong cutting edge support, making it appropriate for interrupted cuts and tougher Stahl workpiece conditions. Can this insert be used for finish passes? Yes, the combination of the WPP05G grade and the 1.2 mm corner radius offers the dimensional stability and surface finish potential required for many finishing operations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns.
SNMG120412-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the MP5 chipbreaker and a robust 1.2 mm corner radius for reliable steel machining and consistent tool life. Order the SNMG120412-MP5 WPP10G turning insert directly via Metav Werkzeuge or contact the consultants for tailored application advice. SNMG120412-MP5 WPP10G turning insert for steel (Square 90°) — Walter Tools The SNMG120412-MP5 WPP10G is a square 90° indexable turning insert designed for productive steel machining, combining a coated carbide grade with a chipbreaker for dependable chip control in general turning applications. Tiger·tec Gold coating for wear resistance MP5 chipbreaker for reliable chip control Square 90° geometry for versatile turning 1.2 mm corner radius for robust edge strength High-performance grade for productive steel turning The SNMG-design insert is manufactured in the Tiger·tec Gold family, using the WPP10G coated carbide grade that is optimised for steel (ISO group P). This combination delivers wear resistance and a stable cutting edge, which translates into longer tool life and fewer indexings. For production-oriented shops, the result is a measurable improvement in uptime and repeatability: the coated grade balances hardness and toughness to resist flank wear while maintaining edge integrity under the thermal and mechanical loads typical of steel machining. Geometry and chip control that stabilise the process The insert’s MP5 chipbreaker and square 90° form are engineered to manage chips and cutting forces during general turning. The 1.2 mm corner radius increases edge strength for interrupted cuts and higher feed rates, while the negative 0° relief provides a controlled cutting geometry that suits many medium to heavy turning tasks. These geometric choices reduce the risk of edge chipping and support consistent surface finish and dimensional control, especially in automated CNC environments where process stability is a priority. Practical application and process advantages Specified for steel applications, this indexable insert supports a broad range of turning tasks from roughing to semi-finishing thanks to its balanced grade and chip control. The SNMG120412-MP5 WPP10G is compatible with standard SNMG-style toolholders, offering straightforward integration into existing tool systems. The practical benefits are twofold: production runs gain predictable tool life and maintenance intervals are simplified, which helps to plan tool changes and reduce unexpected downtime in the machining workflow. Contact Metav Werkzeuge today to discuss how the Walter Tools SNMG120412-MP5 WPP10G can increase machining reliability in steel applications and to receive application-specific recommendations from our consultants Technical data Article number: SNMG120412-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte SNMG120412-MP5 WPP10G Walter Tools Product type: Turning insert (indexable) Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: MP5 Shape: Square 90° Design: G Manufacturer: Walter Tools Facts Size: 12 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness code: 04 Tolerance class: M Special features Coated carbide grade (Tiger·tec Gold) Optimised for steel (ISO group P) Stable chip formation and reliable cutting edge Suitable for general turning and productive machining FAQ Which materials can be machined with this insert? The SNMG120412-MP5 WPP10G is designed primarily for steel (ISO group P); the WPP10G grade and Tiger·tec Gold coating are tuned for the heat and chip formation typical of steel machining. What benefits does the Tiger·tec Gold grade offer? Tiger·tec Gold in the WPP10G grade provides enhanced wear resistance and stable edge life, which helps to extend intervals between indexings and maintain consistent dimensional results on the SNMG120412-MP5. For which operations is the MP5 chipbreaker suitable? The MP5 chipbreaker on this insert manages chip flow reliably in general turning operations, supporting medium to heavy cuts while promoting consistent surface finish and safe chip evacuation. How does the insert geometry affect process reliability? The square 90° geometry and 1.2 mm corner radius increase edge robustness and support higher feed rates with reduced risk of chipping, contributing to stable, repeatable machining in production environments. Is this insert compatible with standard toolholders? The SNMG120412-MP5 WPP10G follows the SNMG designation and is compatible with SNMG-style toolholders; the design allows straightforward integration into common turning setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools. The Walter AG (brand: Walter Tools) is part of the Sandvik group and is recognised as a leading manufacturer of precision metalworking tools.
SNMG120412-MP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a dedicated MP5 chipbreaker and a robust negative‑rake geometry to secure consistent chip control and long tool life in steel turning. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG120412-MP5 WPP20G — indexable turning insert, 0° negative rake, 1.2 mm corner radius (Walter Tools) A SNMG120412-MP5 WPP20G indexable turning insert engineered for productive and reliable machining of steel components in the Tiger‑tec Gold series Tiger‑tec Gold coated carbide grade WPP20G Designed for steel machining (ISO group P) MP5 chipbreaker for reliable chip control 0° negative rake, 1.2 mm corner radius Stable productivity and extended tool life for steel turning The Tiger‑tec Gold WPP20G grade delivers a balance between wear resistance and toughness that suits uninterrupted production. The coating technology reduces flank wear and maintains a stable cutting edge under the high temperatures typical for steel machining, which translates into longer intervals between index changes and fewer unplanned stops. For shops seeking predictable tool life and consistent component quality, this combination supports higher productivity and lower overall machining costs. Predictable chip behaviour and improved surface finish The MP5 chipbreaker is designed to produce short, consistent chips in a wide range of steel alloys (ISO group P). Controlled chip formation reduces the risk of entanglement and machine downtime and helps maintain a steady cutting force, which in turn benefits the surface finish of turned parts. Explaining briefly: a chipbreaker shapes and breaks the metal shavings so they evacuate cleanly — improving process reliability without requiring extra coolant strategies. Rigidity and repeatable accuracy from robust geometry A 0° negative rake and a 1.2 mm corner radius provide mechanical strength at the cutting edge, making the insert particularly suited to heavier cuts and interrupted cuts where edge stability is critical. The square 90° form offers four usable cutting edges per index, enabling economical edge utilisation and straightforward seating in standard tool holders. This geometry supports repeatable dimensional accuracy on serial parts and reduces set‑up sensitivity. Easy integration into standard turning workflows The insert follows the common designation and sizing conventions, which simplifies ordering and toolholder selection for existing tool inventories. The grade and chipbreaker combination is versatile across many steel grades, offering shops a single insert solution for varied turning tasks. For production planning, the clear material suitability (ISO P) and known performance characteristics make process documentation and machining parameter selection more straightforward. Contact Metav Werkzeuge for tailored application recommendations, stock information and rapid delivery of Walter Tools inserts to support smooth production planning Technical Data Article number: SNMG120412-MP5-WPP20G-WALTER Designation: SNMG120412-MP5 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 1.2 mm Size: 12 Insert thickness: 04 Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: MP5 Shape: Square 90° Material application: Steel (ISO group P) FAQ What materials is this insert suitable for? The SNMG120412-MP5 WPP20G insert from Walter Tools is specified for machining steel (ISO group P), covering a broad range of unalloyed and alloyed steels. How does the MP5 chipbreaker influence machining performance? The MP5 chipbreaker promotes short, controllable chips and steady cutting forces, improving process reliability and contributing to a better surface finish when using the SNMG120412-MP5 WPP20G insert. Is the geometry suitable for interrupted cuts or heavier feeds? Yes, the combination of a 0° negative rake and a 1.2 mm corner radius provides edge strength and stability that helps withstand interrupted cuts and heavier material removal rates. How many cutting edges are available per insert? Due to the square 90° form, the insert offers four indexed cutting edges, enabling efficient use of the tool before replacement. What advantages does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold coating on the WPP20G grade improves wear resistance and thermal stability, which extends tool life and supports consistent machining performance on steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no connection between our company and the brands named. The offered article is an original, factory‑new product of the manufacturer.
SNMG120412-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated carbide grade and a robust square 90° geometry yields high process reliability and predictable tool life in steel machining; benefit from stable chip control and dependable edge strength. Order the SNMG120412‑MP5 WPP30G insert via Metav Werkzeuge or request specific cutting-data from the consultants. SNMG120412-MP5 WPP30G — Indexable turning insert, Tiger‑tec Gold, for steel | Walter Tools The SNMG120412-MP5 WPP30G is a square 90° indexable turning insert with a coated carbide grade from the Tiger‑tec Gold series, designed primarily for reliable machining of steels according to ISO P. Tiger‑tec Gold coated carbide grade WPP30G Square 90° geometry for stable cutting 0° negative rake angle for roughing Optimised for steel machining applications Proven grade and coating for consistent productivity The coated carbide grade WPP30G from the Tiger‑tec Gold family combines wear resistance and toughness specifically tuned for machining steel. The multi-layered coating and the coated-hardmetal substrate reduce flank and crater wear, which improves edge life and keeps removal rates steady over longer production runs. For production environments the result is a lower indexable-insert turnover and fewer interruptions for tool changes, which supports predictable cycle times and higher effective throughput. Technical users will appreciate the balance between abrasion resistance and fracture toughness that the grade provides during typical steel cutting temperatures and chip formation. Geometry and chip control that support robust cutting The insert’s square 90° shape with a 1.2 mm corner radius and a 0° (negative) rake is engineered for strength and stability in interrupted or heavy cuts. The MP5 chipbreaker promotes reliable chip formation for a wide range of cutting parameters, reducing the risk of entangling long chips and improving evacuation in both through‑tool and external coolant setups. The combination of geometry and chip control enables consistent radial engagement and provides a secure platform for medium‑to‑heavy roughing operations, where mechanical rigidity and edge security are decisive for process safety. Application focus and production advantages Classified for ISO group P (steel), the insert is suited to unalloyed and alloyed steels where thermal and mechanical loadings demand a tough, coated grade. In practical terms, the insert supports stable surface finishes and repeatable dimensional control across batch production, while limiting the frequency of tool indexing. The robust design reduces the likelihood of edge chipping in high feed or interrupted cutting scenarios. For machining shops seeking reproducible results and predictable maintenance intervals, this insert contributes to improved overall equipment effectiveness and easier process standardisation. For machining steel with maximum process reliability, contact Metav Werkzeuge for application advice and stock information regarding the Walter Tools SNMG120412‑MP5 WPP30G insert Technical Data Article number: SNMG120412-MP5-WPP30G-WALTER Designation: SNMG120412-MP5 WPP30G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WPP30G Facts Plate size: 12 Corner radius: 1.2 mm Rake angle: 0° (negative) Thickness: 04 Tolerance class: M Special features Coated carbide (Tiger‑tec Gold) MP5 chipbreaker Square 90° plate form Execution: G Material application: steel (ISO P) FAQ What materials is this insert intended for? The SNMG120412‑MP5 WPP30G insert is intended for machining steel (ISO group P) and is optimised for the typical heat and chip formation encountered in steel turning. Which chipbreaker does the insert use and what is its benefit? This grade uses the MP5 chipbreaker, which promotes predictable chip formation and reliable evacuation, supporting safer roughing and uninterrupted production cycles. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating reduces flank and crater wear while maintaining edge toughness, which extends tool life and delivers more consistent removal rates during steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120412-NMS WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver series and the WSM01 grade for confident machining of difficult alloys; the NMS chipbreaker and 0° negative rake combine to deliver controlled chip formation and improved edge life. Order this indexable turning insert via Metav Werkzeuge or consult our team for application advice. SNMG120412-NMS WSM01 – Indexable turning insert (Square 90°, 0° negative) by Walter Tools The SNMG120412-NMS WSM01 is a square 90° indexable turning insert engineered for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys in demanding production environments. Tiger‑tec Silver coating for enhanced edge life Optimised NMS chipbreaker for controlled chip flow Suitable for rostfreier Stahl and superalloys 0° negative rake with 1.2 mm corner radius High resilience on rostfreier Stahl and superalloys The combination of the Tiger‑tec Silver coating and the WSM01 grade provides a reliable balance between wear resistance and edge toughness when machining tough materials. Coated cemented carbide resists abrasive and adhesive wear while supporting stable chip formation, which reduces the frequency of edge changes and contributes to consistent part quality. For shops working with rostfreier Stahl or high‑temperature alloys, this insert helps sustain tool life under elevated cutting temperatures. Stable cutting behaviour and controlled chips for safer processes The NMS chipbreaker geometry is designed to produce short, manageable chips across a range of cutting parameters, improving process safety and reducing interruptions. Combined with the 0° negative rake, the geometry increases cutting edge support and reduces the risk of edge chipping when encountering hard inclusions or interrupted cuts. The result is a more predictable machining cycle and improved surface finish on the workpiece. Efficient indexability and robust edge geometry A square 90° shape with a 1.2 mm corner radius offers four usable cutting corners and a favourable balance between strength and versatility. The robust corner radius reduces local stress on the cutting edge, which is particularly advantageous in heavy cuts or when tool overhang is unavoidable. The insert designation is optimised for standard toolholders compatible with SNMG‑type inserts, facilitating fast tool changes and reduced machine downtime. Designed for production reliability and clear material guidance This insert is intended for ISO material groups M and S, meaning suitability for rostfreier Stahl and heat‑resistant superalloys/titanium respectively. The WSM01 grade is a coated carbide formulated to handle the abrasive and thermal demands of these groups, supporting stable cutting-edge behaviour and repeatable results. For engineers seeking a balance of productivity and tool life, the insert offers a technical foundation for process optimisation and predictable cycle times. For tailored tool recommendations and ordering of Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for expert application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SNMG120412-NMS-WSM01-WALTER Name: Drehwendeschneidplatte SNMG120412-NMS WSM01 SKU: SNMG120412-NMS-WSM01-WALTER Manufacturer: Walter Tools Facts Insert size: 12 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Thickness code: 04 Special features Series: Tiger‑tec Silver Grade: WSM01 (coated cemented carbide) Chipbreaker: NMS Insert shape: Square 90° Material suitability: S / M (superalloys/titanium and rostfreier Stahl) FAQ What materials is this insert best suited for? The SNMG120412-NMS WSM01 insert is optimised for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), with the WSM01 grade formulated to handle the thermal and mechanical challenges of these materials. What does the NMS chipbreaker provide in practice? The NMS chipbreaker on this Walter Tools insert promotes short, controlled chips, improving process safety and enabling more consistent automated machining cycles. How does the 0° negative rake affect cutting performance? A 0° negative rake increases edge support and reduces the tendency for chipping under heavy cuts or interrupted machining, contributing to longer effective edge life for the SNMG120412-NMS geometry. Is this insert compatible with standard SNMG toolholders? Yes, the SNMG120412-NMS form corresponds to standard SNMG‑type toolholder interfaces, allowing straightforward tool changes and use in conventional turning setups. What advantages does the Tiger‑tec Silver series deliver? Tiger‑tec Silver coating enhances wear resistance and thermal stability of the cutting edge, which supports longer tool life and consistent surface quality when machining demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand‑new goods of the manufacturer Walter Tools.
SNMG120412-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WSM10S grade for stable cutting edges and consistent performance when machining stainless steel and heat‑resistant alloys. Order the SNMG120412‑NMS WSM10S insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120412-NMS WSM10S – Indexable turning insert, Tiger·tec Silver coating, 0° negative geometry (Walter Tools) The SNMG120412-NMS WSM10S is a square 90° turning insert designed for heavy duty and difficult‑to‑machine materials, optimised for applications in stainless steel and superalloys. Tiger·tec Silver coating for enhanced edge life Suitable for stainless steel and superalloys Square 90° insert with 1.2 mm corner radius 0° negative rake for process stability Improved process security through advanced coating and grade The combination of the Tiger·tec Silver coating and the WSM10S grade provides a durable cutting edge that resists thermal and mechanical wear. This indexable insert is specifically developed for materials that challenge conventional tooling — notably stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S). The coated carbide substrate supports stable chip formation, reduces the risk of built‑up edge and extends the usable life of the tip, which in turn contributes to more predictable cycle times and fewer tool changes on the shop floor. Geometry and chip control that support consistent surface quality A square 90° plate form with a corner radius of 1.2 mm and 0° (negative) rake offers robust support for interrupted or heavy‑cut turning operations. The NMS chipbreaker aids controlled chip evacuation, improving repeatability and surface finish while the thickness code 04 ensures secure clamping in standard toolholders. These geometric features reduce vibration and flank wear, delivering measurable improvements in process reliability and part quality for demanding turning tasks. Application guidance and integration into production This insert is aimed at production environments where process stability and predictable tool life are priorities. It is suited to turning tasks on shafts, rings and components made from stainless steel or high‑temperature alloys where thermal loads and work‑hardening are common. Integration is straightforward with holders compatible with SNMG‑style inserts; the robust design supports longer run lengths and reduced downtime. If uncertainty remains about suitability for a specific component or material, technical advice is available and sample testing can be arranged to verify performance under actual cutting conditions. For precise selection and to match holder geometry, contact Metav Werkzeuge for expert consultation on the SNMG120412‑NMS WSM10S insert and tailored application recommendations. Technical Data Article number: SNMG120412-NMS-WSM10S-WALTER Designation: SNMG120412-NMS WSM10S Product type: Drehwendeschneidplatte / Indexable turning insert Brand: Walter Tools Facts Plate size: 12 mm Corner radius: 1.2 mm Free angle: 0° (negative) Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM10S Chipbreaker: NMS Plate form: Square 90° Material suitability: S / M (superalloys and stainless steel) Series: Tiger‑tec Silver Execution: G SKU: SNMG120412-NMS-WSM10S-WALTER FAQ What materials is this insert designed for? This SNMG120412‑NMS WSM10S insert is formulated for machining stainless steel and heat‑resistant superalloys, offering improved edge stability and chip control for these groups. How does the Tiger·tec Silver coating benefit cutting performance? The Tiger·tec Silver coating on the WSM10S grade enhances thermal resistance and wear protection, which helps the insert maintain a stable cutting edge during prolonged turning operations. What does 0° negative rake mean for machining behaviour? A 0° (negative) rake provides a stronger cutting edge and greater resistance to mechanical shock, making the insert suitable for heavier cuts and interrupted cuts while supporting consistent tool life. Is the SNMG120412‑NMS compatible with standard SNMG holders? Yes, the SNMG120412‑NMS form and thickness code are designed to fit standard SNMG‑compatible toolholders; correct clamping ensures optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered designations are mentioned solely for explanation; there is no connection between our company and the named brands. The item offered is original, factory‑new merchandise from Walter Tools.
SNMG120412-NRS WSM10S WSM10S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating, a robust NRS chipbreaker and a 1.2 mm corner radius delivers repeatable performance and reduced downtime when machining difficult-to-machine alloys. Benefit from stable chip control and high edge strength — order directly via Metav Werkzeuge or consult the technical team for application advice. SNMG120412‑NRS WSM10S indexable turning insert — Tiger·tec Silver coated, 1.2 mm corner radius (Walter Tools) SNMG120412‑NRS WSM10S is an indexable insert for heavy-duty turning of rostfreier Stahl and high-temperature alloys Tiger·tec Silver coated WSM10S carbide grade NRS chipbreaker for secure chip control 0° negative rake for robust cutting stability 1.2 mm corner radius for increased edge strength Consistent performance in rostfreier Stahl and superalloys The WSM10S grade, part of the Tiger·tec Silver family, is a coated carbide designed specifically for demanding materials such as rostfreier Stahl and heat‑resistant superalloys. The combination of the coating technology and the insert geometry supports stable chip formation and reduces the tendency to build up material on the cutting edge. For workshops that must maintain steady cycle times, this insert provides a balance between wear resistance and edge stability that helps to keep processes running reliably. Robust cutting stability reduces interruptions and tool changes A 0° negative rake and a 1.2 mm corner radius give the insert a stronger cutting edge, which increases resistance to mechanical and thermal loads during interrupted cuts or heavier passes. The NRS chipbreaker is optimised for controlled chip flow in tough materials, lowering the risk of chip jamming and tool damage. This results in longer effective edge life and fewer unscheduled tool changes, supporting higher overall productivity and lower unit manufacturing costs. Practical compatibility and selection guidance for process planners The insert is supplied in a square 90° form and follows the SNMG geometry, which suits standard SNMG toolholders for turning operations. The tolerance class M indicates manufacturing precision appropriate for demanding industrial use. For questions on toolholder match, cutting data or process set‑up in specific rostfreier Stahl grades or titanium alloys, Metav Werkzeuge can provide targeted recommendations and application support to ensure the selected insert achieves the desired surface finish and cycle time. For tailored recommendations on Walter Tools Tiger·tec Silver inserts and guidance for machining rostfreier Stahl or superalloys, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — application experts are available to advise on tool selection and process parameters Technical data SKU: SNMG120412-NRS-WSM10S-WALTER Label: Drehwendeschneidplatte SNMG120412-NRS WSM10S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S ISO designation: SNMG120412-NRS WSM10S Facts Corner radius: 1.2 mm Plate size: 12 Free angle: 0° (negative) Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: NRS Plate form: Square 90° Grade type: Coated carbide Suitable materials: S / M Execution: G Application focus: rostfreier Stahl and heat‑resistant superalloys / titanium FAQ What materials is this insert suitable for? The SNMG120412‑NRS WSM10S insert is formulated for machining rostfreier Stahl and high‑temperature alloys (superalloys and titanium), where the Tiger·tec Silver coating and the WSM10S grade offer improved wear resistance and chip control. How does the NRS chipbreaker affect machining? The NRS chipbreaker on the insert promotes controlled chip formation and evacuation when turning demanding materials, contributing to stable cutting conditions and reduced risk of chip‑related interruptions with the SNMG120412‑NRS WSM10S. What is the benefit of a 0° negative rake? A 0° negative rake provides robust cutting stability for heavy or interrupted cuts; the geometry favours a stronger cutting edge and lower deflection, which supports consistent tool life in tough applications. How does the 1.2 mm corner radius influence results? The 1.2 mm corner radius increases edge strength and resistance to mechanical stress, improving reliability under higher feeds or when encountering variable workpiece conditions, while contributing to a consistent surface finish. Is the insert compatible with standard SNMG toolholders? The SNMG geometry of this insert is compatible with standard SNMG toolholders; the SNMG120412‑NRS WSM10S follows established form factors for straightforward mechanical integration. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120412-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from a combination of durable cutting performance, reliable chip control and a robust negative geometry for stable production in difficult-to-machine alloys; order the insert directly via Metav Werkzeuge or ask our consultants for cutting data and optimisation. SNMG120412-NRS WSM20S — Square indexable turning insert (Tiger·tec Silver) for rostfreier Stahl and superalloys (Walter Tools) The SNMG120412-NRS WSM20S is a square 90° indexable turning insert intended for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering a coated carbide grade optimised for stable cutting under severe conditions Tiger·tec Silver coating for durable performance Optimised NRS chipbreaker for secure chips Negative 0° geometry for robust cutting 1.2 mm corner radius for versatile profiles Consistent cutting performance for challenging materials The WSM20S grade from the Tiger·tec Silver family is a coated carbide solution engineered for materials that cause tool edge stress and high temperatures. The insert’s NRS chipbreaker promotes controlled chip formation, reducing the risk of built-up edge and erratic chip behaviour. As a consequence, machining cycles become more predictable and downtimes are minimised. The negative cutting face and sturdy edge preparation provide a mechanical advantage in interrupted cuts and heavy cross-sections, so process stability is the primary operational benefit. Robust edge stability that extends productive runtime A negative 0° rake and reinforced edge geometry make the insert particularly resilient during aggressive cuts. This geometry supports secure engagement with workpieces prone to work-hardening, while the 1.2 mm corner radius balances edge strength with accessibility for profile work. In practice, this means fewer indexings and extended tool life when turning tough alloys or components with variable sections. The combination of the grade’s thermal-management coating and the insert’s mechanical stability results in improved component consistency and surface integrity. Application guidance and practical advantages in the workshop Designed for heavy-duty turning and application in demanding alloys, the insert is recommended where secure chip control and edge longevity are priorities. The square 90° form gives flexibility for multiple cutting edges per insert, enhancing economic efficiency in batch production. For operations requiring both roughing and semi-finish passes in difficult-to-machine materials, the geometry and the Tiger·tec Silver coating deliver reliable results. For specific machining parameters, tool holders and recommended feeds and speeds, Metav Werkzeuge can provide tailored guidance to match machine capability and workpiece metallurgy. For machining advice, availability or to request cutting data for the Walter Tools Tiger·tec Silver WSM20S insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a consultation and supply. Technical data SKU: SNMG120412-NRS-WSM20S-WALTER Designation: SNMG120412-NRS WSM20S Brand: Walter Tools Series: Tiger·tec Silver Core dimensions Shape: Square 90° Size: 12 Corner radius: 1.2 mm Thickness code: 04 Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: NRS Geometry: negative 0° cutting face Material suitability: S / M Application: heavy-duty machining of rostfreier Stahl and heat-resistant superalloys FAQ What materials is this insert suitable for? The SNMG120412-NRS WSM20S insert is formulated for machining rostfreier Stahl and heat‑resistant superalloys (grade S/M), with particular strengths in operations that demand stable chip control and thermal resistance. What is the purpose of the NRS chipbreaker? The NRS chipbreaker on this turning insert controls chip formation for safer evacuation and reduced risk of built-up edge; the feature contributes directly to consistent surface finishes and longer edge life with the WSM20S grade. How does the negative 0° geometry affect performance? Negative 0° geometry increases mechanical edge strength and supports interrupted or heavy cuts; in practical terms it delivers robustness in demanding turning tasks and improves process reliability during roughing. Can the insert be used for finishing as well as roughing? Yes — the square 90° format and 1.2 mm corner radius allow the insert to be used in roughing and certain semi-finish applications, depending on the component geometry and cutting data. Where can cutting data and holder recommendations be obtained? Cutting data and holder recommendations for the SNMG120412-NRS WSM20S turning insert are available from Metav Werkzeuge; they can advise on feeds, speeds and suitable clamping systems for specific machine setups. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; no affiliation between Metav Werkzeuge and the mentioned brands is implied. The offered item is an original, factory-new product of the stated manufacturer.
SNMG120412-NRS WSM30S WSM30S Wendeplatten - Walter Tools
High-efficiency turning for demanding materials: the combination of the WSM30S grade with Tiger·tec Silver coating and the NRS chipformer provides reliable chip control and extended edge life during the machining of stainless steel and heat-resistant alloys; order the SNMG120412-NRS WSM30S directly via Metav Werkzeuge or ask our consultants if needed. SNMG120412-NRS WSM30S indexable turning insert — Tiger·tec Silver coated, 1.2 mm corner radius, Walter Tools The SNMG120412-NRS WSM30S is a square 90° indexable turning insert designed for robust machining of stainless steel and heat-resistant superalloys in industrial turning applications. Tiger·tec Silver coating for heat resistance Optimised NRS chipformer for secure chip control 0° negative rake for robust cutting performance Suitable for stainless steel and superalloys High-temperature stability for constant throughput The combination of the WSM30S carbide grade and Tiger·tec Silver coating delivers a heat-resistant cutting edge that maintains performance under thermal stress. This grade is formulated for components that generate high cutting temperatures, so the insert supports longer cutting intervals and stable dimensional results. The coating reduces flank wear and helps preserve surface finish, resulting in fewer tool changes and a smoother production flow. Predictable chips and enhanced process security Equipped with the NRS chipformer, the insert produces short, controllable chips even when cutting tough-to-machine alloys. The geometry—featuring a 0° negative rake—creates a strong cutting edge that resists chipping and tolerates interrupted cuts. Together, these features reduce unplanned downtime and simplify chip handling, which supports higher machine utilisation and more predictable cycle times. Suited to stainless steel and high-alloy materials This insert is specified for material groups S and M: Superalloys and stainless steel. Superalloys and stainless steels are prone to work hardening and thermal concentration; the WSM30S grade is tuned to promote reliable chip formation and to protect the cutting edge in these conditions. For operations where consistent surface integrity and dimensional stability matter, this insert provides a pragmatic balance between edge strength and wear resistance. Geometry and tolerance for versatile turning operations The square 90° form with a 1.2 mm corner radius and tolerance class M supports a wide range of turning tasks, from medium-duty profiling to more demanding shoulder work. The insert designation reflects its robustness and repeatability in production environments. Where process planners require predictable tool life and clear specification margins, this insert's geometry and grade simplify tool selection and process documentation. For assistance selecting grades, compatible holders or recommended cutting parameters for Walter Tools' Tiger·tec Silver inserts, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: SNMG120412-NRS-WSM30S-WALTER Designation: SNMG120412-NRS WSM30S Product type: Indexable turning insert (square 90°) Manufacturer: Walter Tools Grade: WSM30S Series: Tiger·tec Silver Facts Insert size: 12 mm Corner radius: 1.2 mm Thickness designation: 04 Relief angle: 0° (negative) Tolerance class: M Chipformer: NRS Special features Coating: Tiger·tec Silver Suitable for: stainless steel, Superalloys, titanium Geometry: Square 90° Application focus: Heavy-duty and heat-prone turning operations FAQ What materials is this insert best suited for? The SNMG120412-NRS WSM30S is intended primarily for stainless steel and heat-resistant Superalloys; the WSM30S grade and Tiger·tec Silver coating enhance edge life under thermal load. How does the NRS chipformer affect machining? The NRS chipformer promotes secure, short chips during turning, improving chip evacuation and reducing the risk of chip-related disturbances when using the SNMG120412-NRS insert. What does the 0° negative rake mean for tool selection? A 0° negative rake provides a robust cutting edge that tolerates higher cutting forces and intermittent cuts; it is suitable when process stability and edge strength are priorities for inserts like this SNMG120412-NRS WSM30S. Can this insert be used for finishing operations? Yes—the square 90° shape with a 1.2 mm corner radius supports both medium machining and finishing tasks, offering a compromise between strength and achievable surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools is part of a global offering of precision tools and machine solutions. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120412-NRT WS10 Wendeplatten - Walter Tools
Benefit from a robust WS10 coated‑carbide grade combined with a square 90° geometry and 1.2 mm corner radius to ensure consistent cutting performance and reliable chip control; order the insert directly via Metav Werkzeuge or consult our advisers for application-specific guidance. SNMG120412-NRT WS10 — indexable turning insert, square 90°, 1.2 mm radius (Walter Tools) SNMG120412-NRT WS10 is a square indexable turning insert designed for stable chip control and productive metalcutting applications in modern machining environments. Square 90° insert geometry Robust 0° negative rake for edge strength Corner radius 1.2 mm for stable finishing NRT chipbreaker for consistent chip control High reproducibility and predictable tool life The combination of the WS10 grade and a coated carbide substrate delivers a balance between wear resistance and process stability. This indexable turning insert is manufactured to tolerance class M, which supports repeatable seating and predictable cutting results in production sequences. The square form with a 1.2 mm corner radius offers a compromise between edge robustness and surface quality: the geometry reduces deflection under load while allowing a controlled approach to finishing passes. For operations where process consistency is essential, the design reduces the need for frequent re‑adjustment and helps maintain cycle times. Controlled chips and secure cutting edge for demanding operations The integrated NRT chipbreaker is engineered to promote short, manageable chips across a range of cutting conditions; this lowers the risk of entanglement and improves evacuation from the cutting zone. The 0° negative rake increases the effective edge strength, making the insert well suited to interrupted cuts and applications where tool security is prioritised over extreme shear sharpening. The combination of chip control and a robust edge supports longer in‑machine times and reduces the frequency of unplanned tool changes, contributing directly to higher productivity and lower process variability. Quick integration into the toolroom and inventory systems The square 12 size and standard SNMG interface allow straightforward integration into existing toolholder families. Plate thickness and geometry conform to conventional seat designs, which simplifies tooling logistics and reduces setup complexity on multi‑spindle or CNC turning centres. Material suitability should be verified against the manufacturer’s product matrix before final selection; the WS10 grade is a coated carbide variant, and its optimal workpiece range depends on the specific machining strategy and component material. Selection support is available to align the insert’s mechanical characteristics with production goals and tool‑life expectations. For application advice or to request a quote for Walter Tools inserts including the SNMG120412-NRT WS10, contact Metav Werkzeuge for direct consultation and procurement assistance. Technical data Article number: SNMG120412-NRT-WS10-WALTER SKU: SNMG120412-NRT-WS10-WALTER Product type: indexable turning insert Manufacturer: Walter Tools Designation: SNMG120412-NRT WS10 Facts Insert size: 12 Corner radius: 1.2 mm Plate form: Square 90° Free angle: 0° (negative) Plate thickness: 04 Tolerance class: M Special features Grade: WS10 (coated carbide) Chipbreaker: NRT Series: Walter cutting grade — open series Execution: G Material: catalogue dependent Note: Check product matrix for material suitability FAQ What workpiece materials is this insert suitable for? The SNMG120412-NRT WS10 is a coated carbide grade; material suitability must be verified in the manufacturer’s product matrix to match the WS10 characteristics with specific steels or alloys. How does the NRT chipbreaker influence machining? The NRT chipbreaker promotes short, controllable chips and improves evacuation, which enhances process stability and reduces the likelihood of chip‑related interruptions when using the insert. What are the benefits of the 0° negative rake in this geometry? A 0° negative rake increases edge strength and resistance to mechanical loading, making the insert more robust for interrupted cuts and applications requiring secure cutting edges. Which toolholder style is required for this SNMG insert? The SNMG form requires a compatible square insert seat and clamping system designed for SNMG‑type inserts; matching the toolholder to the SNMG120412‑NRT dimensions ensures correct seating and repeatable results. How does the 1.2 mm corner radius affect surface finish? A corner radius of 1.2 mm offers a balance between durability and surface quality: it reduces edge chipping while supporting fine but stable finishing passes, depending on cutting parameters. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. There is no affiliation between Metav Werkzeuge and the trademark owners beyond the sale of original, factory‑new products. Walter Tools is referenced as the original equipment manufacturer where applicable.
SNMG120412-NRT WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S grade and the NRT chipbreaker for reliable chip control and extended edge life when machining stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG120412-NRT WSM20S – Turning insert, Tiger·tec Silver grade, for stainless steel by Walter Tools The SNMG120412-NRT WSM20S is a negative‑rake, square‑format turning insert engineered for secure chip control and stable cutting when machining stainless steel and other difficult‑to‑cut alloys. Tiger·tec Silver coated grade WSM20S Square 90° insert with 1.2 mm corner radius NRT chipbreaker for stable chip formation Negative 0° rake for robust engagement Consistent chip control for demanding materials The combination of a dedicated NRT chipbreaker and the WSM20S coated grade delivers consistent chip formation under challenging conditions. Designed particularly for stainless steel and superalloys, this insert supports predictable chip flow and reduces the risk of built‑up edge. The negative 0° rake geometry increases edge robustness during interruptions and hardening variations in the workpiece, helping to maintain process stability and reduce unplanned downtime. Such stability is especially valuable in continuous production environments where reproducible results are essential. Extended edge life and thermal resistance The Tiger·tec Silver coating provides a balance of thermal protection and wear resistance that is beneficial when turning heat‑sensitive materials. The coating technology, combined with the tungsten‑based WSM20S carbide grade, helps the cutting edge resist degradation from high temperatures and adhesive wear. A defined 1.2 mm corner radius improves edge strength and distributes cutting forces, which can lead to fewer insert changes and longer intervals between tool inspections — a clear operational advantage for batch production and serial machining of stainless steel components. Geometry and handling that simplify setup The square 90° plate form and the standard SNMG designation make the insert compatible with a wide range of tool holders and clamping systems used in turning operations. With a plate size of 12 mm and a thickness indicated by the standard code, the insert sits securely in the pocket, while the NRT chipbreaker helps maintain short, controllable chips for automated and manual operations alike. These characteristics support a straightforward setup process and predictable cutting behaviour, which in turn reduces setup time and contributes to throughput efficiency. Contact Metav Werkzeuge today for tailored recommendations on cutting data and holder selection for optimal performance with this Walter Tools insert Technical data Article number: SNMG120412-NRT-WSM20S-WALTER Designation: SNMG120412-NRT WSM20S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Shape: Square 90° Corner radius: 1.2 mm Size: 12 Rake angle: 0° (negative) Tolerance class: M Special features Grade: WSM20S Coating: Tiger·tec Silver Chipbreaker: NRT Suitable for: stainless steel, heat‑resistant superalloys and titanium (S) Plate thickness code: 04 FAQ What materials are suitable for this insert? The SNMG120412-NRT WSM20S insert from Walter Tools is intended primarily for stainless steel and is also suitable for heat‑resistant superalloys and titanium when the geometry and cutting data are adapted. How does the NRT chipbreaker benefit production? The NRT chipbreaker on this insert promotes stable, short chip formation and reduces chip‑related interruptions, improving process reliability during turning of stainless steel and similar materials. Is the insert compatible with standard SNMG tool holders? Yes, the SNMG120412-NRT designation corresponds to standard square SNMG holders; correct clamping and orientation ensure accurate seat and secure engagement. What operational advantage does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength and load distribution, which helps resist chipping and extend tool life under interrupted cuts or variable material conditions. Does the Tiger·tec Silver coating improve thermal performance? The Tiger·tec Silver coating enhances thermal and wear resistance compared with uncoated grades, contributing to improved edge retention when machining materials that generate high heat. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SNMG120412-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, dependable chip control and straightforward integration into standard turning toolholders to keep production steady and rework low; order the inserts through Metav Werkzeuge or consult their specialists for application advice. SNMG120412-RM5 WMP20G Drehwendeschneidplatte – Tiger·tec Gold coated insert for stainless steels | Walter Tools SNMG120412-RM5 WMP20G is a square indexable turning insert designed for reliable machining of stainless steels under medium to robust cutting conditions Tiger·tec Gold coating for increased edge life Designed for stainless steel machining (ISO M) Square 90° insert with 1.2 mm corner radius RM5 chipbreaker for stable chip formation Longer productive tool life through advanced coating technology The combination of Tiger·tec Gold coating and the WMP20G grade provides a durable, coated carbide solution that extends edge life when facing the adhesion and heat-related wear typical of stainless steels. The coated microstructure reduces flank wear and supports consistent performance across a run of components, which in turn lowers tool change frequency and unplanned stoppages. For manufacturers seeking predictable consumable intervals, the insert’s design helps maintain surface quality while managing total machining costs. Predictable chip control and process stability for turning operations Built with an RM5 chipbreaker and a negative rake angle of 0°, the insert encourages secure chip formation when cutting ductile, work-hardenÂing-prone materials. The square 90° geometry and corner radius 1.2 mm combine to reduce vibration and the risk of built-up edge, delivering improved surface finish and dimensional repeatability. These features translate into fewer secondary operations and less scrap, supporting higher first-pass yield in mixed-batch production. Easy adaptation to existing toolholders and machining strategies With the industry-standard SNMG designation and a compact size, the insert fits a wide range of holders and clamping systems, facilitating quick swaps during production changeovers. The standardised form factor simplifies inventory management, while the robust grade WMP20G is tuned for medium to heavy cuts in ISO M materials, enabling stable metal removal rates without sacrificing component integrity. Documentation-friendly dimensions and ISO grouping support straightforward process planning. Economical performance: fewer interruptions, lower indirect costs Optimised for stable chip formation and a resilient cutting edge, this insert helps reduce downtime caused by edge failure or poor chip evacuation. The cumulative effect is a leaner machining process with reduced operator intervention and cleaner machine runs. For operations targeting consistent batch throughput, the insert represents a balance between durability and controllable cutting forces, improving overall equipment effectiveness and contributing to predictable production schedules. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold SNMG120412-RM5 inserts for stainless steel applications and to obtain tailored supply and cutting recommendations via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: SNMG120412-RM5-WMP20G-WALTER Designation: SNMG120412-RM5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade/sort: WMP20G Execution: G Facts Insert size: 12 Corner radius: 1.2 mm Thickness: 04 Clearance/rake angle: 0° Corner angle: 90° Special features Coating/grade: Tiger·tec Gold – WMP20G Chipbreaker: RM5 Geometry: square 90° Application group: stainless steels (ISO M) Tolerance class: M FAQ What materials is this insert intended for? The SNMG120412-RM5 WMP20G insert is specified for stainless steels (ISO M); the WMP20G grade is tuned to handle the toughness and heat characteristics of these alloys. How does the RM5 chipbreaker affect machining performance? The RM5 chipbreaker promotes consistent chip control and reduces the risk of long, stringy chips when turning stainless steels, contributing to process stability and improved surface finish with the Walter Tools insert. Which insert geometry benefits roughing or finishing? The square 90° geometry with a 1.2 mm corner radius offers a balance: robust enough for heavier cuts while still allowing acceptable surface quality for semi-finish operations when paired with suitable parameters. Is this insert compatible with standard SNMG toolholders? Yes, the SNMG120412-RM5 form follows industry SNMG dimensions and is compatible with standard toolholders designed for SNMG inserts. What distinguishes the WMP20G grade from general-purpose grades? WMP20G, part of the Tiger·tec Gold family, is a coated carbide grade optimised for reduced flank wear and improved edge stability in stainless steel turning compared with uncoated or generic grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120412-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high process security and robust edge stability for reliable machining of stainless steel; the coated-carbide grade delivers stable chip control and long tool life. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNMG120412-RM5 WMP20S Drehwendeschneidplatte – Square 90°, 1.2 mm radius, Walter Tools SNMG120412-RM5 WMP20S is a square turning insert designed for reliable machining under medium to heavy conditions, especially for stainless steel, and forms part of the Tiger·tec Silver series Tiger·tec Silver coated carbide Optimised for stainless steel (M-group) Square 90° geometry, 1.2 mm corner radius 0° negative rake for robust cutting Consistent chip control and longer edge life for stable production The combination of the WMP20S grade and the Tiger·tec Silver coating provides a balanced performance that emphasises stable chip formation and wear resistance. In practice, this means fewer interruptions for edge changes and more predictable tool life in series production. The integrated RM5 chipbreaker supports secure chip evacuation when machining tough, ductile materials, improving process security and reducing manual rework. Operators benefit from less downtime and a more consistent surface finish when an insert with these properties is specified. Designed for stainless steel to reduce build-up and thermal issues Machining stainless steel often causes material to adhere to the cutting edge and generates high cutting temperatures. The coated substrate and the chemical-physical properties of the grade help to reduce built-up edge and improve heat management. Using an insert with this specification supports a safer chip flow and helps maintain cutting-edge geometry under elevated thermal loads, which in turn contributes to more repeatable part quality and reduced secondary operations. Geometry and handling that support versatile turning tasks The Square 90° form combined with a 1.2 mm corner radius makes the insert suitable for a range of turning tasks where strength at the corner and the ability to handle interrupted cuts are required. The 0° negative rake increases edge robustness and provides more stable cutting in heavier engagements. This geometry is particularly useful where tool strength is preferred over maximum sharpness, for example in finishing and medium roughing of stainless steel where chatter and edge wear must be avoided. Practical benefits for workshop productivity and process planning Specification of this insert simplifies process planning: the clear material group applicability (M) reduces the choice overload when selecting grades for stainless applications, and the coated-carbide construction ensures a good compromise between economy and performance. The format and chipbreaker support automated production cycles by lowering the frequency of insert changes and enabling longer periods of consistent operation. For workshops aiming to increase throughput without compromising component quality, the insert offers a pragmatic balance between durability and surface result. Contact Metav Werkzeuge for technical advice on Walter Tools Tiger·tec Silver inserts or request a tailored recommendation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG120412-RM5-WMP20S-WALTER Article: SNMG120412-RM5 WMP20S Type: Turning insert (Drehwendeschneidplatte) Brand: Walter Tools Key dimensions Insert shape: Square 90° Size: 12 Thickness code: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Materials & features Coating: Tiger·tec Silver Grade: WMP20S Substrate: Coated carbide Chipbreaker: RM5 Suitable for: stainless steel (M) Series: Tiger·tec Silver Execution: G FAQ What materials is this insert suitable for? The SNMG120412-RM5 WMP20S insert is specified for stainless steel (M-group) and is engineered to manage the toughness and thermal behaviour typical of those materials. How does the Tiger·tec Silver coating benefit operations? The Tiger·tec Silver coating on the WMP20S grade improves wear resistance and supports stable chip formation, which helps to extend insert life and maintain consistent surface quality. Which chipbreaker is fitted and what does it do? The insert uses an RM5 chipbreaker designed to promote secure chip control during turning of stainless steel, reducing the risk of built-up edge and improving process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any connection between our company and the named manufacturers. The offered article is original factory-new goods of the manufacturer.
SNMG120412-RM5 WMP30G WMP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the RM5 chipbreaker and a robust 1.2 mm corner radius to secure stable cutting in stainless steel and longer tool life; order the insert directly via Metav Werkzeuge or ask our consultants for cutting data and process recommendations. SNMG120412-RM5 WMP30G turning insert — Tiger·tec Gold grade for stainless steel (Walter Tools) SNMG120412-RM5 WMP30G is a square 90° turning insert engineered for medium to robust turning of stainless steel, offering reliable chip control and extended edge life. Tiger·tec Gold coating for improved life Optimised for stainless steel (ISO M) RM5 chipbreaker for stable chip control Square 90° insert with 1.2 mm corner radius Longer tool life through modern coating and grade The combination of Tiger·tec Gold technology and the WMP30G grade provides a coated carbide solution that is engineered for the specific demands of stainless steel. The multilayer coating reduces flank wear and supports a stable cutting edge under the heat and adhesion tendencies common to this material group. The result is a consistent tool life and fewer interruptions for insert changes, which translates directly into higher machine availability and lower unit manufacturing costs. The grade’s balance between toughness and hardness helps to avoid premature breakage while maintaining effective wear resistance under medium to heavy duty conditions. Geometry and chip management that stabilises the process The insert’s square 90° form and 1.2 mm corner radius deliver a strong cutting edge for robust turning operations and predictable corner strength. Combined with the RM5 chipbreaker, the geometry actively promotes controlled chip segmentation, reducing the risk of long, entangling swarf and improving surface quality. The 0° (negative) free angle yields a stable cutting position that benefits interrupted cuts and heavy cross-sections by lowering the tendency for elastic deflection of the cutting edge. For workshops that require repeatable surface finish and minimal rework, this insert offers a clear process advantage through its geometry-driven stability. Practical production benefits and target applications Designed for industrial turning shops and batch production, this insert supports efficient machining of stainless steel with an emphasis on process reliability and productivity. The grade and chipbreaker combination reduces downtime for chip clearing and tool changes, while the insert’s robust geometry tolerates tougher feed rates and cutting depths. For operators seeking a straightforward upgrade path from general-purpose grades, the insert provides measurable improvements in cut consistency and surface finish without demanding complex parameter changes. The technical benefits translate to fewer rejects, reduced machining variability and easier tool inventory management in mixed-production environments. Contact Metav Werkzeuge for tailored cutting data and application advice on the SNMG120412-RM5 WMP30G turning insert; our consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMG120412-RM5-WMP30G-WALTER Designation: SNMG120412-RM5 WMP30G Type: turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP30G Facts Plate size: 12 mm Corner radius: 1.2 mm Free angle: 0° (negative) Plate thickness code: 04 Special features Coating: Tiger·tec Gold Chipbreaker: RM5 Geometry: Square 90° Material suitability: stainless steel (ISO M) Substrate: coated carbide FAQ What materials is this insert optimised for? The SNMG120412-RM5 WMP30G is optimised for machining stainless steel (material group M), where the Tiger·tec Gold grade aids stable chip formation and edge life. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker provides controlled chip segmentation and evacuation, improving process stability and reducing the risk of entangling swarf during turning operations. Is the negative 0° free angle suitable for finishing cuts? The 0° (negative) free angle increases cutting edge robustness and is particularly effective in interrupted cuts or heavier roughing passes; finishing strategies may require adjusted feeds or alternative geometries depending on the desired surface finish. What benefits does the Tiger·tec Gold coating offer compared with uncoated grades? Tiger·tec Gold coating enhances wear resistance and thermal stability, which supports longer tool life and more consistent results when turning stainless steel under medium to demanding conditions. Which industries or applications typically use this insert? The insert is well suited to general engineering and subcontract machining where stainless steel components require repeatable turning performance, for example in automotive, valve and pump manufacturing. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNMG120412-RM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Silver coating, a robust RM5 chipbreaker and a square 90° geometry for secure machining of stainless and heat‑resistant alloys; order the SNMG120412-RM5 WSM20S directly via Metav Werkzeuge or consult the technical team for application advice. SNMG120412-RM5 WSM20S — Tiger·tec Silver square 90° turning insert by Walter Tools SNMG120412-RM5 WSM20S is a coated, square 90° turning insert designed for heavy and challenging machining of stainless steels and heat‑resistant superalloys Tiger·tec Silver coating, WSM20S grade Optimised RM5 chipbreaker for heavy cuts Square 90° insert with 1.2 corner radius Negative 0° relief for secure insert seat Consistent edge life and process security for demanding materials The combination of Tiger·tec Silver technology and the WSM20S carbide grade provides a well‑balanced performance profile for machining tough-to-cut materials. The applied coating improves heat resistance and wear behaviour, which leads to stable chip formation and prolonged cutting edge life. This results in fewer tool changes and higher machine uptime, translating into measurable improvements in process reliability and productivity when working with stainless steels and high‑temperature alloys. Geometry tailored for robust turning and repeatable results A square 90° shape with a 1.2 corner radius and 0° relief gives a secure seating position and a strong cutting edge capable of absorbing higher cutting forces. The RM5 chipbreaker controls chip flow during heavy engagement, reducing the risk of built‑up edge on sticky materials. Together, the geometry and chipformer support predictable behaviour under load, which simplifies process planning and minimises scrap in series production. Practical advantages in workshop and production use The insert’s specification supports stable performance in roughing and semi‑finishing operations on materials classified as M (stainless steels) and S (heat‑resistant superalloys and titanium). Because the grade and coating are optimised for thermal and mechanical load, fewer tool indexings are required and component tolerances can be met more consistently. This balance of wear resistance and edge stability contributes to cost‑effective machining over the life of the tool. Application guidance and compatibility Intended for use in standard indexable tool holders that accept SNMG style inserts, the item is suitable where high thermal loads and adhesive tendencies present a machining challenge. Selection of cutting parameters should consider workpiece material, toolholder rigidity and machine capability; the insert’s design reduces the risk of premature edge failure under heavy cut regimes. For detailed machining parameter recommendations and holder compatibility, Metav Werkzeuge can provide tailored support. Contact Metav Werkzeuge for application-specific recommendations on the Walter Tools SNMG120412-RM5 WSM20S or request a consultation at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: SNMG120412-RM5-WSM20S-WALTER Designation: SNMG120412-RM5 WSM20S Manufacturer: Walter Tools Product type: turning insert Series: Tiger·tec Silver Core specifications Size: 12 Thickness: 04 Corner radius: 1.2 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WSM20S Chipbreaker: RM5 Plate form: Square 90° Material suitability: S / M Execution: G Baureihe: Tiger-tec Silver FAQ Which materials is this insert suitable for? The SNMG120412-RM5 WSM20S from Walter Tools is intended for materials in groups M and S, specifically stainless steels and heat‑resistant superalloys or titanium, as indicated by its WSM20S grade and Tiger·tec Silver technology. What benefits does the RM5 chipbreaker deliver? The RM5 chipbreaker is designed to manage chips during heavy cuts, promoting stable chip formation and reducing the likelihood of built‑up edge when machining sticky or work‑hardening materials. What geometry and seating does the insert offer? The insert features a square 90° form with a 1.2 corner radius and a 0° (negative) relief, providing a robust cutting edge and secure seating for demanding turning operations. Is this a coated carbide grade? Yes, the insert belongs to the Tiger·tec Silver series and is a coated cemented carbide grade (WSM20S), engineered for improved heat resistance and wear performance. For which machining tasks is this insert recommended? This indexable insert is suitable for roughing and semi‑finishing where high thermal and mechanical loads occur, particularly on stainless steels and superalloys that require a stable cutting edge and reliable chip control. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the listed brands. The offered article is an original, factory‑new product of the manufacturer, Walter Tools.
SNMG120412-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust RM5 chipbreaker for stable, efficient turning of stainless steels and heat‑resistant alloys; this insert delivers consistent edge life and reliable chip control in production environments. Order directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120412-RM5 WSM30S – Square indexable turning insert (Tiger·tec Silver) by Walter Tools for stainless steels and superalloys The SNMG120412-RM5 WSM30S is a square indexable turning insert engineered to provide secure chip control and a stable cutting edge when machining stainless steels and heat‑resistant alloys in demanding turning operations Tiger·tec Silver coated carbide For stainless steel and superalloys Square 90° insert, 1.2 mm corner radius RM5 chipbreaker for reliable chip control High‑performance coating for consistent edge life The combination of Tiger·tec Silver coating and a coated cemented carbide substrate provides a reliable foundation for continuous and interrupted turning. The advanced coating reduces adhesion and improves thermal resistance, which helps maintain a stable cutting edge when machining tough, heat‑generating materials. This results in extended tool life and fewer indexings, supporting a smoother production flow and reduced tool change downtime. Application advantages for stainless steels and superalloys Designed for the specific challenges of stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), the insert's grade WSM30S promotes secure chip formation and prevents build‑ups on the cutting edge. The material combination and geometry make the insert particularly suitable where heat generation and toughness would otherwise shorten tool life, enabling reproducible component quality and improved process stability for batch and serial production. Geometry that supports heavy cuts and dependable chip control With a square 90° form and a 1.2 mm corner radius, this insert offers strength at the cutting corner, permitting heavier radial depths and increased stability during interrupted cuts. The 0° negative relief gives a robust cutting edge for power‑intensive operations, while the RM5 chipbreaker is optimised to break and evacuate chips reliably, reducing the risk of chip entanglement and improving surface finish. These features make the insert well suited for demanding turning tasks where process security is essential. Productive machining and shop‑floor benefits Integrating this insert into standard turning toolholders delivers practical benefits: predictable tool life, consistent surface quality and fewer unscheduled interruptions. The Walter Tools design philosophy emphasises process reliability and repeatable performance, supporting higher productivity and controlled manufacturing costs. For workshops seeking straightforward interchangeability and dependable results, the insert fits existing SNMG tool systems and contributes to an efficient machining cycle. Contact Metav Werkzeuge to discuss suitability for specific components and to request availability of the Walter Tools SNMG120412-RM5 WSM30S with Tiger·tec Silver coating Technical data SKU: SNMG120412-RM5-WSM30S-WALTER Article: Drehwendeschneidplatte SNMG120412-RM5 WSM30S Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Size designation: 12 Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness designation: 04 Tolerance class: M Special features Coating: Tiger·tec Silver (coated cemented carbide) Chipbreaker: RM5 Shape: Square 90° Applicable material groups: M (stainless steels), S (superalloys and titanium) Execution: G Base designation: SNMG120412-RM5 FAQ What materials is this insert suitable for? This insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S); the WSM30S grade supports secure chip formation and thermal stability for these materials. How does the RM5 chipbreaker benefit machining? The RM5 chipbreaker on the SNMG120412‑RM5 WSM30S promotes controlled chip formation and evacuation, reducing the chance of chip entanglement and improving surface quality during turning. What does the 1.2 mm corner radius mean for performance? A 1.2 mm corner radius increases strength at the cutting edge, allowing heavier cuts and improved resistance to chipping, which benefits process reliability and repeatable component quality. Is the insert compatible with standard SNMG toolholders? The SNMG120412‑RM5 WSM30S is produced to SNMG specifications and is compatible with the corresponding SNMG toolholder systems suited for square 90° indexable inserts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation purposes only; there is no connection between Metav Werkzeuge and the mentioned manufacturers. The offered article is an original, brand‑new product from the manufacturer (Walter Tools).
SNMG120412-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the RP5 chipbreaker and a 1.2 mm corner radius for dependable steel machining; order the insert via Metav Werkzeuge or consult our advisors for application support. SNMG120412-RP5 WPP05G — Indexable turning insert, Tiger‑tec Gold coated, square 90° (Walter Tools) SNMG120412-RP5 WPP05G is a square indexable turning insert designed for efficient steel turning, combining a Tiger‑tec Gold coated carbide grade with a robust RP5 chipbreaker for stable metal removal. Tiger‑tec Gold coated carbide grade WPP05G Optimised RP5 chipbreaker for steel Square 90° insert with 1.2 mm corner radius 0° negative rake for stable cutting Consistent performance for steel machining The combination of Tiger‑tec Gold coating and the WPP05G grade provides high wear resistance and reliable edge stability when machining steels (ISO group P). The coating reduces flank wear and improves heat resistance, which in turn extends the effective life of the insert and reduces changeover frequency. The design focuses on steady cutting behaviour under typical turning conditions, making the insert suitable for productive, repeatable operations in general engineering and subcontracting. Controlled chips and improved surface quality The RP5 chipbreaker is engineered to produce predictable chip formation when turning steel, reducing the risk of long, tangled chips and minimising rework time. By promoting short, controllable chips, the geometry helps maintain coolant contact and consistent cutting forces, which benefits the resulting surface finish and dimensional stability. Clear chip control also contributes to safer automated processes and less machine downtime. Increased tool life and cost-efficiency Manufactured from coated carbide, this insert delivers a favourable balance between toughness and wear resistance. The 1.2 mm corner radius provides additional cutting-edge strength, enabling more robust feeds without premature chipping. These characteristics translate into longer tool life and a lower cost per component in series production — a pragmatic advantage for shops aiming to improve productivity and reduce tooling costs. Practical geometry and application guidance The designation SNMG120412-RP5 WPP05G indicates a square 90° insert, nominal size 12 mm, plate thickness 4 mm and a corner radius of 1.2 mm with a 0° negative rake, offering stable engagement and good radial strength. This geometry is especially suitable for medium to heavy turning of steels where robust edge support is required. For specific cutting data or to match the insert to an appropriate tool holder and machine capability, consult the technical advisers at Metav Werkzeuge for tailored recommendations. Contact Metav Werkzeuge today for tailored advice on Walter Tools SNMG120412-RP5 WPP05G inserts, availability and application support — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: SNMG120412-RP5-WPP05G-WALTER SKU: SNMG120412-RP5-WPP05G-WALTER Product type: Indexable turning insert Brand: Walter Tools Grade: WPP05G Series: Tiger‑tec Gold Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: RP5 Insert shape: Square 90° Base material: Coated carbide Execution: G Suitable material group: Steel (ISO P) FAQ What materials is this insert suited for? The SNMG120412-RP5 WPP05G insert is designed primarily for steel machining (ISO group P); the WPP05G grade and Tiger‑tec Gold coating are optimised for the heat and chip characteristics typical of steels. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and resistance to chipping, allowing higher feed rates and improved tool life when turning medium to heavy sections in steel. What is the benefit of the RP5 chipbreaker? The RP5 chipbreaker promotes short, controllable chips during steel turning, improving process safety, coolant effectiveness and surface finish while reducing machine downtime. Is this insert suitable for stainless or rostfreier Stahl? The data specifies suitability for steel (ISO P); stainless or rostfreier Stahl is not indicated as a confirmed application for this grade and should be validated with technical advisers before use. What are the key geometric details for machine setup? The insert is a square 90° type, nominal 12 mm size with 4 mm thickness, 1.2 mm corner radius and 0° negative rake — the SNMG120412-RP5 WPP05G designation summarises these characteristics for selection of holder and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
SNMG120412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating for extended tool life, the RP5 chipbreaker for consistent chip control and the robust 1.2 mm corner radius for reliable performance in steel turning; order directly via Metav Werkzeuge or consult our product specialists for application support. SNMG120412-RP5 WPP10G — Drehwendeschneidplatte, Tiger‑tec Gold, for steel — Walter Tools The SNMG120412-RP5 WPP10G indexable turning insert for efficient medium‑duty and finishing operations in steel, delivering stable cutting performance and predictable tool life. Tiger‑tec Gold coating for extended tool life RP5 chipbreaker for consistent chip control Square 90° shape with 1.2 mm corner radius 0° negative rake for stable cutting conditions Longer tool life through advanced coating technology The insert uses the Tiger‑tec Gold coating and a coated carbide substrate, a combination engineered to resist abrasive wear and maintain edge integrity under the thermal and mechanical loads typical of steel machining. This results in reduced flank wear and a longer service interval compared with uncoated alternatives. The material and coating selection supports stable performance across a range of cutting speeds and feed rates, helping to maintain component quality and reduce downtime for insert changes. The emphasis here is on measurable process stability rather than marketing claims. Controlled chips and dependable surface finish The integrated RP5 chipbreaker is designed to control chip shape and evacuation during turning, which reduces the risk of chip entanglement and improves machining predictability. The square 90° geometry combined with a 1.2 mm corner radius produces a robust cutting edge that supports consistent dimensional results and a good surface finish in finishing and light-medium roughing passes. The 0° negative rake gives enhanced edge strength, particularly useful when encountering interrupted cuts or variable workpiece conditions. Suitability for a broad range of steel applications This insert is specified for the ISO material group P (steel) and is intended for standard steels, including a spectrum from tougher to more wear-prone grades. The Walter grade WPP10G is a versatile choice for many turning tasks where a balance of wear resistance and edge stability is required. For operations prioritising repeatable productivity and predictable tool life, this grade supports stable chip formation and mitigates rapid edge degradation in continuous production environments. Practical notes on mounting and compatibility The SNMG‑format indexable design fits toolholders that accept SNMG‑type inserts; the square shape allows indexability to extend usable edge life. For optimal results, pair the insert with a compatible negative‑rake holder that securely supports the 90° seating – this maximises edge support and reduces the likelihood of insert movement under load. When specifying insert geometry, confirm holder seat and clamp compatibility to ensure safe, repeatable operation with minimal micro‑movement. Contact Metav Werkzeuge to discuss Walter Tools' SNMG120412-RP5 WPP10G inserts, compatibility with existing toolholders and tailored recommendations for steel turning applications. Technical data SKU: SNMG120412-RP5-WPP10G-WALTER Designation: SNMG120412-RP5 WPP10G Product type: Drehwendeschneidplatte Brand: Walter Tools Core figures Plate size: 12 Corner radius: 1.2 mm Thickness: 04 Negative rake angle: 0° Tolerance class: M Features / Applications Series: Tiger‑tec Gold Grade / coating: WPP10G (coated carbide) Chipbreaker: RP5 Shape: Square 90° Material group: P (steel) Execution: G FAQ Which materials is this insert suitable for? The SNMG120412‑RP5 WPP10G is intended primarily for ISO group P (steel) and is optimised for a wide range of steel turning tasks, providing good wear resistance and edge stability. What is the benefit of the Tiger‑tec Gold grade? Tiger‑tec Gold in the WPP10G grade offers a coated carbide formulation that improves wear resistance and supports a longer useful life of the insert under steel‑cutting conditions. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes consistent chip formation and evacuation, which assists in maintaining surface quality and reducing chip interference during turning. Is the insert suitable for finishing or roughing operations? With a 1.2 mm corner radius and 0° negative rake, the insert is best used for finishing and light to medium turning where a balance of surface finish and edge strength is required. Which holder types are compatible with this SNMG insert? This SNMG‑format insert requires a compatible SNMG toolholder with a 90° seat and secure clamping appropriate for negative‑rake inserts to ensure stable cutting conditions. Can this insert be indexed to use multiple cutting edges? Yes, the square SNMG geometry allows multiple indexable edges, extending the total operational life per insert when correctly mounted and rotated. The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not indicate any affiliation between our company and the manufacturers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120412-RP5 WPP20G G Wendeplatten - Walter Tools
High-performance turning with a Tiger·tec Gold coating, RP5 chip control and a 1.2 mm corner radius ensures long edge life and reliable chip formation in Stahl machining; order the insert directly via Metav Werkzeuge or consult the sales engineers for process-specific recommendations. SNMG120412-RP5 WPP20G — Square indexable turning insert, Tiger·tec Gold, RP5 chipbreaker (Walter Tools) The SNMG120412-RP5 WPP20G is a square 90° indexable turning insert for machining Stahl, combining a Tiger·tec Gold coated grade with a negative 0° rake for robust, general-purpose turning. Tiger·tec Gold coating for extended life RP5 chipbreaker for predictable chip control 1.2 mm corner radius for increased strength Square 90° form for versatile turning Consistent edge life and process reliability for production turning The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a balanced performance tailored to Stahl machining. The advanced coating technology reduces flank wear and improves thermal resistance during continuous turning operations, resulting in predictable tool life and less unplanned downtime. For production environments seeking stable cutting conditions, this coating-grade pairing supports repeatable results and lower tool-change frequency, which in turn helps to reduce process costs and maintain throughput. Geometry and chip control that aid productivity A square 90° plate form with a 1.2 mm corner radius and the RP5 chipbreaker provides a robust cutting edge and controlled chip formation. The 0° negative rake increases edge strength for heavier cuts and interrupted cuts, while the chipbreaker geometry promotes short, manageable chips for standard turning of Stahl. For less experienced operators, the insert’s geometry simplifies parameter selection: stronger edges allow conservative feeds and depths without sacrificing productivity, and the chip control reduces secondary operations for chip disposal. Practical workshop advantages and compatibility The insert’s format and chipbreaker make it suitable for a wide range of general turning tasks on Stahl as defined by ISO group P. The RP5 chip control contributes to improved surface finish and consistent dimensional stability across batches. For workshops aiming to standardise tooling, the insert supports efficient changeover and predictable machining windows, enabling operators to achieve high first-pass quality without complex parameter tuning. Technical advisors can recommend cutting data based on material grade and machine capability. Proven brand backing and application orientation Manufactured by Walter Tools, the insert benefits from a manufacturer focus on process stability and consistent tool performance. The WPP20G grade is designed as a universally applicable coated carbide for Stahl, offering a blend of wear resistance and toughness suitable for many shop-floor applications. For companies prioritising reliable supplier logistics and repeatable results, this insert fits into toolsets where robust, economical machining is required. For application-specific advice or to request a tailored recommendation for Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for consultancy and supply options. Technical data Article number: SNMG120412-RP5-WPP20G-WALTER Product type: Drehwendeschneidplatte Grade/Sort: WPP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Data Corner radius: 1.2 mm Free rake: 0° (negativ) Plate form: Quadrat 90° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Chipbreaker: RP5 Material suitability: Stahl (ISO group P) Coating technology: Tiger·tec Gold Execution: G FAQ What materials is this insert designed for? The SNMG120412-RP5 WPP20G is specified for machining Stahl (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the typical heat and chip formation encountered when turning Stahl. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert promotes predictable, short chips and aids stable chip evacuation, which supports consistent surface finish and reduces the risk of chip-related interruptions. Is the 0° rake suitable for heavy cuts? Yes, the negative 0° rake increases edge strength and is suitable for heavier or intermittent cuts where a robust cutting edge is advantageous. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com