SNMG120412-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of high productivity, stable chip control and the Tiger‑tec Gold coated grade for consistent turning results; the combination of a robust RP5 chipbreaker and a 1.2 mm corner radius reduces downtime and tool changes. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. SNMG120412-RP5 WPP30G turning insert — Walter Tools, Tiger‑tec Gold, for steel applications An indexable turning insert designed for medium to heavy turning operations in steel, offering a square 90° form, 0° negative rake and the wear-resistant WPP30G grade for reliable material removal Tiger‑tec Gold coated carbide grade RP5 chipbreaker for controlled chip formation Square 90° form with 1.2 mm corner radius Suited for steel (P) turning applications Greater process stability through optimised chip control The coated carbide WPP30G grade, part of the Tiger‑tec Gold series, is engineered for stable chip formation when machining steel (P). Its RP5 chipbreaker promotes predictable chip flow and reduces the risk of built-up edge, which in turn lowers the likelihood of unplanned stops. By combining a robust chipformer with a 0° negative rake, this design increases resistance to cutting-edge chipping under interrupted cuts. The result is a measurable improvement in process reliability and fewer insert exchanges during production. Robust cutting edge for consistent surface quality A square 90° insert profile with a 1.2 mm corner radius delivers both strength and repeatable edge geometry, supporting stable turning under varying cutting conditions. The higher edge strength offered by the negative rake and compact corner radius helps maintain cutting performance during heavier depths of cut, so component finish and dimensional repeatability are preserved. For operations where reproducible results are essential, this geometry minimises deflection and contributes to an economical machining cycle. Clear application scope and handling recommendations This insert is optimised for unalloyed and alloyed steels, matching the ISO group P specification; it is therefore recommended for a broad range of turning tasks where thermal loads and continuous chip formation are typical. For best outcomes, pairing the insert with appropriate cutting parameters and a stable toolholder is advised; coolant and cutting speed should be selected according to workpiece grade and machine capability. Technical consultations are available to help translate these parameters into daily production settings. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools Tiger‑tec Gold inserts and to arrange a machining consultation with a product specialist Technical Data Article number: SNMG120412-RP5-WPP30G-WALTER Label: Drehwendeschneidplatte SNMG120412-RP5 WPP30G Walter Tools Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WPP30G Shape: Square 90° Size: 12 Thickness: 04 Corner radius: 1,2 Chipbreaker: RP5 Rake angle: 0° (negativ) Tolerance class: M Material code: P (steel) Special features Coated carbide grade Optimised chip control High process stability Suited for steel machining FAQ What is the primary application for this insert? This turning insert is intended chiefly for machining steels (ISO group P) and is supplied in the Walter Tools SNMG120412-RP5 WPP30G configuration for stable turning operations. Which chipbreaker should be chosen for interrupted cuts? The RP5 chipbreaker integrated in this insert is designed to handle variable chip formation and offers improved control during interrupted or heavier cuts. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WPP30G grade enhances wear resistance and contributes to extended tool life and consistent surface quality under typical steel turning conditions. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120412-RP7 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of proven wear resistance, optimised chip control and robust negative geometry to maintain steady production when machining steel; order directly via Metav Werkzeuge or consult our specialists for process-matching recommendations. SNMG120412-RP7 WPP20G turning insert, Tiger·tec Gold, Walter Tools The SNMG120412-RP7 WPP20G is a square 90° indexable turning insert designed for high-productivity steel turning, combining Tiger·tec Gold coating with an RP7 chipbreaker for consistent chip control. Tiger·tec Gold coated carbide grade WPP20G RP7 chipbreaker optimised for steel machining Square 90° insert with 1.2 mm corner radius Negative 0° geometry for stable heavy cuts High-performance grade for reliable steel turning The SNMG120412-RP7 WPP20G insert uses Walter Tools’ Tiger·tec Gold coating technology and a coated cemented carbide substrate to extend tool life under typical steel turning conditions. The WPP20G grade is balanced for universal performance in the ISO P group, offering improved wear resistance while maintaining toughness for interrupted cuts. This combination reduces index change frequency and supports predictable tool-life planning, which is particularly relevant for batch production and serial turning where throughput and repeatability are priorities. Consistent chip control that improves cycle times The RP7 chipbreaker is engineered to produce short, controllable chips when machining steels, enhancing swarf evacuation and reducing risks of workpiece damage or tool re-cutting. Consistent chip form leads to fewer process interruptions and a more stable cutting force profile. In practical terms, the chipbreaker design helps maintain surface quality and can permit slightly higher cutting depths or feeds without compromising shop-floor safety, thereby contributing to measurable productivity gains. Geometry tailored for demanding operations A square 90° insert form with a 1.2 mm corner radius and negative 0° rake angle delivers robustness at the cutting edge for heavy or interrupted cuts. Negative geometry increases edge strength and helps resist chipping under variable loads, which is advantageous when turning medium to heavy sections of steel. The 90° shape provides flexibility for shoulder and profile operations, while the specified corner radius balances edge strength and achievable surface finish for common turning tasks. Practical selection and application guidance This grade and geometry are aimed primarily at steel machining under ISO P conditions; the WPP20G grade covers a spectrum from wear-resistant to universal performance and can be selected for standard to demanding turning operations. For process setup, match feeds and speeds to material condition and machine rigidity; the RP7 chipbreaker performs best when cutting parameters promote consistent chip formation. When in doubt about parameter windows or insert clamping, Metav Werkzeuge can supply detailed recommendations and compatible holder options to integrate the insert efficiently into existing turning operations. For robust, high-productivity steel turning with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for tailored machining advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: SNMG120412-RP7-WPP20G-WALTER Designation: SNMG120412-RP7 WPP20G Product type: Turning indexable insert Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Core data Insert form: Square 90° Inscribed circle / size: 12 Corner radius: 1.2 mm Thickness: 04 Free angle: 0° (negative) Tolerance class: M Special features Coated cemented carbide grade WPP20G RP7 chipbreaker for controlled chips Suited for ISO P (steel) applications Stable edge geometry for interrupted cuts Designed for process reliability and productivity FAQ What materials is this insert suitable for? The SNMG120412-RP7 WPP20G insert and its WPP20G grade are specified for the ISO P group, i.e. machining steel such as unalloyed and alloyed steels. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker produces short, controllable chips when turning steel, improving swarf control and allowing more stable cutting conditions with fewer interruptions. What does the negative 0° geometry mean in practice? Negative 0° geometry indicates a robust cutting edge that resists chipping under heavy loads or disrupted cuts, favouring durability over the lowest possible cutting forces. Can this insert be used for finishing operations? With a 1.2 mm corner radius and the Tiger·tec Gold coating, the insert balances edge strength and surface finish; it can be used for medium-finish operations but may not match very small-radius finishing inserts for ultra-fine surface requirements. Is the insert compatible with standard SNMG toolholders? The insert follows the SNMG designation and is compatible with toolholders designed for SNMG inserts, provided the holder supports the 90° square form and the specified thickness. Hersteller: Walter Tools. The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the named brands. The offered article is original, factory-new goods. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120412-RP7 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, a reliable RP7 chipbreaker, and a compact square 90° geometry to keep turning operations productive and predictable. Order the SNMG120412-RP7 WPP30G indexable insert via Metav Werkzeuge or request advice from our consultants for process optimisation. SNMG120412-RP7 WPP30G — indexable turning insert, Tiger‑tec Gold grade by Walter Tools SNMG120412-RP7 WPP30G is a square 90° indexable insert designed for robust turning of steels under ISO P conditions, combining a coated cemented‑carbide grade with a controlled chipformer for consistent performance Tiger‑tec Gold coated for extended life RP7 chipbreaker for stable chip control Square 90° geometry for versatile turning Corner radius 1.2 mm for improved edge strength Longer tool life and consistent cutting performance The coated cemented‑carbide WPP30G grade, part of the Tiger‑tec Gold series, is formulated for the thermal and mechanical demands of machining steels (ISO P). The combination of a modern multilayer coating and a tough substrate yields stable wear behaviour and a reliable cutting edge, which reduces unscheduled tool changes and supports longer uninterrupted runs. The RP7 chipbreaker is tuned for controlled chip formation in a wide range of feed rates, leading to fewer interruptions caused by poor chip evacuation and an overall improvement in process reliability. Precise geometry for repeatable surface quality The insert’s square 90° shape and corner radius of 1.2 mm deliver a balanced mix of edge strength and finish capability. The 0° (negative) rake gives robustness in interrupted cuts and heavy roughing, while the defined radius supports consistent surface finish on turned components. These geometric choices enable shops to maintain reproducible part quality across batches, reducing rework and inspection effort and supporting tighter production tolerances. Application range and practical machining benefits Designed primarily for steels, the grade’s wear resistance and chip control offer clear economic advantages: improved tool life translates into lower tooling consumption and reduced downtime. The RP7 chipbreaker helps achieve predictable chip shapes, which simplifies coolant and chip‑conveyor planning on the shop floor. For production environments where efficiency and uptime matter, this insert provides a good balance between productivity and process security, particularly in mixed‑batch turning where material variability may otherwise cause performance swings. Integration into the tooling system and handling notes The designation SNMG120412-RP7 denotes a standard insert footprint compatible with commonly used toolholders; the compact plate size (12 mm) and plate thickness (4 mm) make it suitable for stable clamping in conventional turning toolholders. Tolerance class M ensures consistent fit and repeatability when indexing inserts, minimising set‑up variation. For optimised results, pair the insert with holders rated for square SNMG geometry and apply cutting parameters suitable for the chosen steel grade and hardness. Contact Metav Werkzeuge for tailored recommendations on Walter Tools SNMG120412-RP7 WPP30G inserts and to confirm the best grade and parameters for specific steel applications: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SNMG120412-RP7-WPP30G-WALTER SKU: SNMG120412-RP7-WPP30G-WALTER Designation: SNMG120412-RP7 WPP30G Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Facts Size: 12 mm Thickness: 4 mm Corner radius: 1.2 mm Relief / rake: 0° (negative) Tolerance class: M Special features Grade: WPP30G (Tiger‑tec Gold coated cemented carbide) Chipbreaker: RP7 Plate form: Square 90° Base designation: SNMG120412-RP7 Series: Tiger‑tec Gold Execution: G Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The SNMG120412-RP7 WPP30G insert is designed for machining steels and is rated for ISO P material groups. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on the WPP30G grade enhances wear resistance and thermal stability, resulting in longer tool life and more consistent cutting behaviour when turning steels. What is the purpose of the RP7 chipbreaker? The RP7 chipbreaker promotes controlled chip formation and evacuation, improving process reliability and reducing the risk of chip‑related interruptions in turning operations. Is the 1.2 mm corner radius suitable for finishing passes? A 1.2 mm corner radius delivers good edge strength and can produce acceptable surface finishes; for very fine finishes, smaller radii or dedicated finishing grades may be preferred. Which toolholders are compatible with this insert designation? The SNMG120412 footprint matches standard toolholders designed for SNMG inserts; use holders compatible with square 90° inserts and ensure correct clamping for repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120416-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Silver coating and the MK5 chipbreaker ensures extended tool life and predictable chip control when machining cast iron; combine this with the robust square 90° geometry for stable cuts and reliable surface finish – order the SNMG120416‑MK5 WKK10S directly via Metav Werkzeuge or request application advice from our consultants. SNMG120416-MK5 WKK10S – Indexable turning insert, Tiger‑tec Silver (Walter Tools) The SNMG120416‑MK5 WKK10S is a square 90° indexable insert designed for productive turning of cast iron, pairing a coated carbide grade with an MK5 chipbreaker for consistent short chips and abrasion resistance. Tiger‑tec Silver coating for abrasion resistance Optimised MK5 chipbreaker for short chips Square 90° insert with 1.6 mm corner radius Designed for cast iron machining Consistent wear resistance for longer tool life The use of the Tiger‑tec Silver coating together with the WKK10S grade offers a balance of abrasion resistance and toughness tailored to abrasive cast iron applications. Coated carbide technology means the cutting edge is protected by a thin, wear‑resistant layer that reduces flank wear and extends useful life, which translates into fewer tool changes and steadier cycle times. For production environments this leads to measurable improvements in uptime and a lower cost per machined component. Predictable chip control and improved process stability An MK5 chipbreaker engineered for short, broken chips reduces the risk of entanglement and simplifies material evacuation. Combined with the insert’s square 90° geometry and 1.6 mm corner radius, the result is improved cutting force distribution and repeatable edge engagement. This configuration supports stable machining parameters, allowing for higher material removal rates in many turning operations while maintaining consistent surface quality on cast iron workpieces. Robust geometry for demanding cutting conditions The negative relief angle of 0° and the medium tolerance class contribute to a sturdy edge that resists shock and thermal variations typical when machining cast iron. The insert’s design supports interrupted cuts and heavy‑duty turning where chip formation is abrupt and abrasive wear is dominant. Choosing this grade and geometry therefore reduces the frequency of unexpected edge failures and helps maintain process predictability on the shop floor. Easy integration into production workflows The insert’s standard SNMG form and the familiar clamping interfaces make it simple to adopt within established toolholding systems. The combination of coated carbide and a dedicated chipbreaker reduces the need for constant parameter adjustments; operators gain a straightforward setup with reproducible results. For workshops seeking to raise productivity without extensive process requalification, this insert presents a practical step towards greater machining efficiency. For high‑performance cast iron turning, specify the Walter Tools Tiger‑tec Silver SNMG120416‑MK5 WKK10S and contact Metav Werkzeuge for application support and tailored recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SNMG120416-MK5-WKK10S-WALTER Designation: SNMG120416-MK5 WKK10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Key dimensions Plate size: 12 Thickness code: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Plate form: Quadrat 90° Tolerance class: M Features and applications Chipbreaker: MK5 Coating: Tiger‑tec Silver Material code: K Suitable for: cast iron Execution: G FAQ Which materials is this insert suited for? The SNMG120416‑MK5 WKK10S is designed primarily for machining cast iron (material group K), with the WKK10S grade optimised for abrasive wear and short, breaking chips. What chip control can be expected with this geometry? The MK5 chipbreaker on the SNMG120416‑MK5 promotes short, controllable chips, improving evacuation and reducing the likelihood of chip entanglement during turning operations on cast iron. What are the key geometric data of the insert? The insert is a square 90° type with a 1.6 mm corner radius and a negative relief angle of 0°, offering robust cutting geometry for interrupted and heavy cuts. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating provides enhanced abrasion resistance and thermal stability, which helps extend edge life and maintain consistent surface finish when turning abrasive cast iron materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
SNMG120416-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and an optimised MK5 chipbreaker for productive, consistent cast iron turning; the robust geometry and stable edge life support uninterrupted series production. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. SNMG120416-MK5 WKK20S – indexable turning insert, Tiger‑tec Silver, for cast iron | Walter Tools The SNMG120416‑MK5 WKK20S is a square 90° indexable turning insert engineered for high‑productivity machining of cast iron, providing stable chip control and reliable wear resistance in demanding production environments. *Tiger‑tec Silver coated grade WKK20S *Optimised MK5 chipbreaker for cast iron *Square 90° form with 1.6 mm corner radius *Consistent edge life and stable chip control Maximise throughput on abrasive cast iron The coated carbide grade WKK20S, part of the Tiger‑tec Silver family, is tailored to the abrasive nature and short, often breaking chips of cast iron. The grade provides enhanced resistance to abrasive wear, which translates into longer tool life and fewer index changes on the machine. For production-oriented workshops this means fewer interruptions and a steadier output rate; the technological focus is on predictable performance under continuous use rather than occasional high‑speed experiments. This grade is therefore a practical choice where repeatable results and reduced downtime are priorities. Reliable chip control and robust cutting geometry The combination of the MK5 chipbreaker, a square 90° form and a 1.6 mm corner radius produces controlled chip formation and evacuation when machining cast iron. The insert’s 0° (negative) clearance angle increases edge robustness and helps withstand interrupted cuts or heavy engagement without premature edge failure. These geometric choices support process security and reduce the risk of unexpected tool change‑offs; in practice, fewer surface defects and a more consistent part finish are achieved with the same machining strategy. Simple application and economical use in series production Built to ISO designation SNMG120416‑MK5 WKK20S, the insert is compatible with standard clamping systems for square inserts and is suited to high‑volume components that demand repeatability. The tolerance class M ensures consistent fitment across toolholders, while the coated grade means less frequent indexing and lower tooling consumption in the long run. Workshops aiming to streamline tooling inventories will find this insert a pragmatic choice for cast iron turning operations, combining stability and cost‑effective reproducibility. For tailored advice on integrating Walter Tools Tiger‑tec Silver inserts into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct technical consultation and ordering support Technical Data SKU: SNMG120416-MK5-WKK20S-WALTER Designation: SNMG120416-MK5 WKK20S Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WKK20S Manufacturer: Walter Tools Specifications Insert size: 12 Form: Square 90° Corner radius: 1.6 mm Clearance angle: 0° (negative) Thickness: 04 Tolerance class: M Materials / Special features Coating / grade: Tiger‑tec Silver (coated carbide) Chipbreaker: MK5 Suitable for: cast iron Material code: K Series description: WKK20S optimised for abrasive wear and breaking chips FAQ Is this insert suitable for machining stainless steel? No. The SNMG120416‑MK5 WKK20S grade is optimised for cast iron and its abrasive, short‑chip behaviour; it is not specified for stainless steel applications. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKK20S grade improves resistance to abrasive wear and supports consistent edge life when turning cast iron, reducing the frequency of index changes. How does the MK5 chipbreaker behave with cast iron? The MK5 chipbreaker is designed to produce short, controllable chips in cast iron, improving evacuation and reducing the risk of chip entanglement in series production. Can the insert handle interrupted cuts? Yes. The negative 0° clearance angle and robust geometry increase edge strength, making the insert well suited to interrupted or heavy engagement cuts typical in cast iron machining. Which ISO designation should be ordered for this insert? Order the insert as SNMG120416‑MK5 WKK20S (Walter Tools), which precisely denotes the geometry, chipbreaker and grade for cast iron turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used here only for explanatory purposes. The offered item is an original, factory‑new product of the manufacturer.
SNMG120416-MP5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the MP5 chipbreaker for reliable steel turning, plus a robust square 90° geometry with a 1.6 mm corner radius — order directly via Metav Werkzeuge or consult our specialists for application advice SNMG120416-MP5 WPP10G — turning insert (Tiger·tec Gold, for steel) by Walter Tools A SNMG120416-MP5 WPP10G turning insert engineered for steel machining, delivering stable chip control and enhanced tool life for demanding production environments Tiger·tec Gold coated carbide MP5 chipbreaker for stable chip control Square 90° geometry, 1.6 mm corner radius Negative 0° rake for secure cutting Increased tool life through advanced grade technology The combination of Tiger·tec Gold coating and the WPP10G grade gives this insert a clear advantage in operations involving steel. The multilayer coating reduces thermal and abrasive wear, which translates into longer service intervals and fewer indexings. For production runs where consistent cutting-edge condition matters, this grade supports predictable tool-life behaviour and reduced downtime. The result is improved throughput and lower overall tooling costs without compromising component quality. Consistent chip forming and surface quality The MP5 chipbreaker is designed to manage chips effectively in typical steel-cutting scenarios, promoting short, controlled chips and reducing the risk of re-cutting or machine interference. The square 90° form combined with a 1.6 mm corner radius provides a robust cutting edge that supports stable cutting forces and a reliable surface finish. The negative 0° rake angle enhances edge strength for interrupted cuts and heavy engagement, making the insert suitable for machining operations where process security and repeatability are priorities. Easy integration for standard toolholders and predictable results Dimensionally consistent with the SNMG format, the insert’s specification (size 12, thickness 04) and tolerance class M mean it fits common toolholders and clamping systems used in turning centres. The standardised geometry simplifies tool selection and inventory planning while the clear designation aids quick identification on the shop floor. Combined with the grade’s suitability for unalloyed and alloyed steels, the insert supports efficient setup changes and a reliable transition from trial runs to full production. Contact Metav Werkzeuge today to specify the SNMG120416-MP5 WPP10G turning insert from Walter Tools for steel applications and request tailored advice or a formal quotation via Metav Werkzeuge Technical Data Article number: SNMG120416-MP5-WPP10G-WALTER Product type: Drehwendeschneidplatte Brand: Walter Tools Designation: SNMG120416-MP5 WPP10G Facts Plate size: 12 Thickness: 04 Corner radius: 1.6 mm Geometry: Square 90° Relief angle: 0° (negative) Tolerance class: M Special features Coating/Grade: Tiger·tec Gold; WPP10G Chipbreaker: MP5 Material application: Steel (P) Series info: Tiger-tec Gold FAQ What materials is this insert suitable for? The SNMG120416-MP5 WPP10G is designed primarily for steel (ISO group P), offering tailored wear resistance for unalloyed and alloyed steels. Which chip control can be expected with this insert? The MP5 chipbreaker on the SNMG120416-MP5 WPP10G produces short, controlled chips in steel turning, supporting consistent surface quality and reduced chip-related interruptions. What are the key dimensions and geometry of the insert? This SNMG-format insert has a plate size 12, thickness 04, square 90° geometry and a 1.6 mm corner radius, with a negative 0° relief angle for enhanced edge strength. Is the insert coated and what benefit does the coating provide? Yes — the Tiger·tec Gold coating (WPP10G) improves thermal and abrasive resistance, extending tool life and stabilising performance during steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered article is original, factory-new goods from the manufacturer.
SNMG120416-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of versatile cutting performance, robust edge technology and stable chip control for consistent results in steel turning; order original Walter Tools inserts through Metav Werkzeuge or consult their technical advisors for process setup. SNMG120416-MP5 WPP20G turning insert — Tiger·tec Gold, for steel machining (Walter Tools) The SNMG120416-MP5 WPP20G is a square turning insert designed for general steel machining, combining a Tiger·tec Gold coated carbide grade with an MP5 chipbreaker for reliable chip control in production environments Tiger·tec Gold coated carbide grade WPP20G MP5 chipbreaker for controlled chip formation Square 90° insert with 1.6 mm corner radius 0° negative rake for robust steel turning High-performance grade for steel machining that extends tool life The insert is produced in the WPP20G grade and benefits from Tiger·tec Gold coating technology, which delivers a balanced combination of wear resistance and toughness. Engineered specifically for ISO group P (steel), this coated carbide formulation supports the thermal and mechanical demands of turning operations, reducing flank wear under cyclic loading. The designation of tolerance class M ensures reproducible seating and repeatable part tolerances when used on standard toolholders, which helps to maintain consistent component quality across batches. Precise chip control and edge geometry for cleaner cuts Equipped with an MP5 chipbreaker, the insert promotes short, controlled chips that are easier to evacuate in typical lathe setups; this improves process safety and reduces the risk of surface damage. The square 90° geometry, combined with a 1.6 mm corner radius, offers a robust cutting edge for shoulder cuts and general turning, providing a compromise between strength and surface finish. The 0° negative rake (negative geometry) further enhances edge stability on interrupted cuts and heavy-duty passes, making the SNMG120416-MP5 WPP20G suitable for applications where tool life and predictable behaviour are priorities. Application benefits for productivity and process reliability For workshops aiming to streamline steel turning operations, the insert supports productive machining with fewer tool changes and consistent component results. The balanced grade and chipbreaker help to lower cycle-time variability, while the insert’s geometry permits secure clamping and straightforward indexing in multi-tooth holders. For specific cutting data and optimised feeds and speeds, technical consultation is recommended to adapt parameters to the workpiece alloy and machine rigidity; this approach maximises tool life and surface integrity while reducing rework and downtime. For tailored machining advice or to source original Walter Tools SNMG120416-MP5 WPP20G inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — the technical team will assist with grade selection and process recommendations. Technical data Article number / SKU: SNMG120416-MP5-WPP20G-WALTER Product label: Drehwendeschneidplatte SNMG120416-MP5 WPP20G Walter Tools Manufacturer: Walter Tools Core data Insert size: 12 Thickness designation: 04 Corner radius: 1.6 mm Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold technology) Chipbreaker: MP5 Insert form: Square 90° Material group suitability: Steel (ISO P) Coating type: coated carbide FAQ What materials is this insert suitable for? The SNMG120416-MP5 WPP20G insert is specified for steels (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the typical heat and chip behaviour of steel machining. How does the MP5 chipbreaker improve machining? The MP5 chipbreaker on this Walter Tools insert produces controlled, short chips that simplify chip evacuation and reduce entanglement, improving surface quality and process safety during turning operations. When is the 0° negative rake advantageous? A 0° negative rake provides a stiffer cutting edge that resists chipping during heavy or interrupted cuts; it is therefore recommended for robust turning tasks and applications demanding secure edge stability. What benefits does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases edge strength, helping to withstand higher cutting forces and delivering improved tool life while still allowing acceptable surface finish on general turning and shoulder cuts. Is this insert compatible with standard SNMG toolholders? Yes, the SNMG120416-MP5 WPP20G follows standard SNMG geometry and tolerance class M, making it compatible with conventional SNMG toolholders when secured and indexed according to the holder manufacturer’s instructions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not indicate any affiliation between our company and the brand owners. The offered item is an original, brand-new product from the manufacturer.
SNMG120416-NMS WSM10S WSM10S Wendeplatten - Walter Tools
High-performance Tiger·tec Silver grade and a 1.6 mm corner radius provide stable edge life and reliable chip control for demanding materials; integrate this insert for predictable cycle times and lower downtime. Order the SNMG120416-NMS WSM10S directly via Metav Werkzeuge or ask our consultants if needed. SNMG120416-NMS WSM10S — indexable turning insert, Tiger·tec Silver, 1.6 mm radius (Walter Tools) SNMG120416-NMS WSM10S is a square 90° indexable insert designed for turning applications in demanding alloys and rostfreier Stahl Tiger·tec Silver coated grade WSM10S Square 90° insert with 1.6 mm corner radius NMS chipbreaker for controlled chip formation 0° negative relief for robust cutting edge Robust cutting performance for rostfreier Stahl and superalloys The Tiger·tec Silver WSM10S grade was developed for heavy-duty turning where heat and built-up edge are critical. As a coated cemented carbide insert, it combines a wear-resistant coating with substrate toughness to maintain a sharp cutting geometry under elevated temperatures. When machining rostfreier Stahl (ISO group M) or heat-resistant superalloys (ISO group S), this combination reduces the tendency to form stubborn welds on the edge and supports stable chip formation, which in turn improves surface finish and reduces the need for rework. The result is a higher process yield and more predictable cycle times. Stable edge and predictable chip control for uninterrupted production The NMS chipbreaker and the square 90° format give consistent chip segmentation across a broad range of feeds and depths of cut. The 1.6 mm corner radius increases edge strength without sacrificing dimensional accuracy at standard turning parameters, while the 0° negative relief produces a robust cutting zone that tolerates interrupted cuts and hard spots. Together these features support longer tool life and fewer indexings, which reduces machine stops and operator intervention — a rational benefit for production environments seeking throughput and repeatability. Easy integration and measurable economic impact Engineered for industrial use, the insert fits standard toolholders for SNMG-style indexable tools and is supplied in the Tiger·tec Silver series that is known for consistent lot-to-lot performance. By maintaining edge stability and controlling chips, the insert contributes to lower tooling costs per part and less scrap. For shop floors with mixed material batches—especially rostfreier Stahl and high-temperature alloys—this insert provides a dependable compromise between wear resistance and toughness. Operational queries on cutting data or application matching are supported by Metav Werkzeuge’s technical advisors who can help select cutting parameters and holder interfaces. For reliable machining of rostfreier Stahl and high-temperature alloys, choose the Walter Tools SNMG120416-NMS WSM10S insert — contact Metav Werkzeuge for application advice and availability. Technical data Article number: SNMG120416-NMS-WSM10S-WALTER SKU: SNMG120416-NMS-WSM10S-WALTER Designation: SNMG120416-NMS WSM10S Series: Tiger-tec Silver Core specifications Insert size: 12 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Thickness code: 04 Features and materials Grade: WSM10S Coating technology: Tiger·tec Silver Chipbreaker: NMS Insert form: Square 90° Material suitability: rostfreier Stahl, heat-resistant superalloys and titanium (ISO groups M and S) Tolerance class: M Execution: G FAQ What materials is this insert best suited for? The SNMG120416-NMS WSM10S insert is specified for rostfreier Stahl (ISO M) and heat-resistant superalloys or titanium (ISO S); the Tiger·tec Silver WSM10S grade is formulated to manage heat and avoid built-up edge. How does the NMS chipbreaker affect machining results? The NMS chipbreaker on the SNMG120416-NMS WSM10S promotes reproducible chip segmentation, improving surface finish and reducing risk of entangling chips during continuous turning cycles. What advantage does the 1.6 mm corner radius provide? A 1.6 mm corner radius increases edge strength and wear resistance on the SNMG120416-NMS WSM10S insert, leading to longer effective tool life with maintained dimensional control. Manufacturer: Walter Tools, Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Marken, Warenzeichen und eingetragene Bezeichnungen liegen im Eigentum ihrer jeweiligen Inhaber. Sie werden hier nur zur Erklärung verwendet. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120416-RM5 WMP20G WMP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the RM5 chipbreaker and a 1.6 mm corner radius produces a turning insert that sustains stable cutting edges and predictable chip control when machining rostfreier Stahl; order via Metav Werkzeuge or contact our consultants for application-specific recommendations. SNMG120416-RM5 WMP20G indexable turning insert for rostfreier Stahl, Tiger·tec Gold – Walter Tools The SNMG120416-RM5 WMP20G is a square indexable turning insert designed for robust, repeatable performance in the machining of rostfreier Stahl, combining a Tiger·tec Gold coating with a tailored RM5 chipbreaker to support secure chip formation under medium to heavy conditions Tiger·tec Gold for edge stability and wear resistance RM5 chipbreaker optimised for rostfreier Stahl Square 90° form with 1.6 mm corner radius 0° (negative) relief for interrupted cuts Consistent performance on rostfreier Stahl for predictable productivity The combination of the Tiger·tec Gold coating and the WMP20G grade provides a balance between wear resistance and thermal stability, which is critical when machining rostfreier Stahl. Coated carbide substrates reduce the tendency for built-up edge and enable longer cutting intervals, so production can run with fewer tool changes. This results in a measurable productivity gain and lower process variability, a clear rational benefit for shops aiming to improve throughput while maintaining component quality. Controlled chip formation and reliable cutting-edge life The RM5 chipbreaker is developed to promote short, controllable chips when turning stainless grades; this reduces evacuation issues and the risk of re-cutting. The 1.6 mm corner radius and square 90° geometry deliver a compromise between strength and surface finish, helping to avoid edge chipping under interrupted or moderately roughing conditions. The 0° (negative) relief angle increases edge robustness for heavy cuts, supporting stable tool life and predictable maintenance intervals. Practical setup and application advice for efficient integration For best results, pair the insert with a rigid toolholder and ensure correct seat and clamp torque to maintain repeatability. Moderate cutting speeds with appropriate coolant strategies usually prevent excessive heat build-up on rostfreier Stahl, allowing the coated substrate to perform as intended. When finishing, reduce depth of cut to exploit the insert’s edge integrity for improved surface quality. For material-specific cutting data or parameter optimisation, Metav Werkzeuge can provide tailored recommendations to match machine capability and workpiece requirements. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to identify the ideal operating window for rostfreier Stahl machining Technical data Article number: SNMG120416-RM5-WMP20G-WALTER Label: Drehwendeschneidplatte SNMG120416-RM5 WMP20G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Grade: WMP20G Series: Tiger-tec Gold Chipbreaker: RM5 Execution: G ISO designation: SNMG120416-RM5 WMP20G Facts Size: 12 Corner radius: 1.6 mm Plate thickness: 04 Relief angle: 0° (negative) Special features Coating: Tiger·tec Gold (coated carbide) Material group suitability: rostfreier Stahl (ISO group M) Plate form: Square 90° Bezeichnung ohne Sorte: SNMG120416-RM5 Wendeplatte ISO: SNMG120416-RM5 WMP20G FAQ What materials is this insert intended for? The SNMG120416-RM5 WMP20G turning insert from Walter Tools is designed primarily for machining rostfreier Stahl (ISO group M) under medium to robust conditions. How does the RM5 chipbreaker benefit shop processes? The RM5 chipbreaker on the SNMG120416-RM5 WMP20G promotes short, controlled chips when turning rostfreier Stahl, improving chip evacuation and reducing the risk of interference with the tool or workpiece. Is the insert suitable for interrupted cuts? Yes, the 0° (negative) relief and robust geometry of the SNMG120416-RM5 WMP20G increase resistance to edge chipping, making the insert appropriate for interrupted or unstable cut conditions. What is the effect of the 1.6 mm corner radius? A 1.6 mm corner radius on the SNMG120416-RM5 WMP20G balances edge strength and surface finish, providing improved tool life during moderate roughing while still allowing acceptable finishing performance. Can this insert be used for finishing operations? The SNMG120416-RM5 WMP20G can be used for finishing when parameters are adjusted accordingly—reduce depth of cut and feed to exploit the coated grade’s edge integrity for improved surface quality. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no business affiliation implied between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SNMG120416-RM5 WSM20S RM5 Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating, the WSM20S grade and the RM5 chipbreaker delivers stable cutting performance and long tool life in demanding turning operations; this balance of productivity and durability supports consistent part quality. Order the SNMG120416-RM5 WSM20S inserts directly via Metav Werkzeuge or consult our sales engineers for application advice. SNMG120416-RM5 WSM20S indexable turning insert (Tiger·tec Silver) by Walter Tools SNMG120416-RM5 WSM20S is a square 90° insert engineered for robust shoulder turning and heavy interrupted cuts in stainless steels and heat‑resistant alloys. Tiger·tec Silver coating for long life WSM20S grade for stainless and superalloys RM5 chipbreaker for stable chip control Square 90° geometry for shoulder turning High‑performance grade for difficult materials The WSM20S grade, applied within the Tiger·tec Silver coating family, is formulated for the demands of stainless steels and heat‑resistant superalloys. Coated carbide chemistry and a modern multi‑layer coating system reduce flank wear and support a predictable tool life under elevated temperatures. For workshop planners and production engineers this means fewer tool changes and more consistent component dimensions, improving process reliability on tough turning tasks. Geometry and chip control that enhance productivity A square 90° plate shape with a corner radius of 1.6 mm and the RM5 chipbreaker combine to deliver controlled chip formation and strong edge stability. The 0° negative rake makes the insert especially robust for interrupted cuts and heavy shoulder turning, where edge strength is critical. Stable chip breaking reduces cycle interruptions and simplifies chip evacuation, thereby increasing effective machining time and lowering indirect production costs. Practical benefits for workshop efficiency and setup The designation and tolerance class (M) allow straightforward integration into existing toolholders and programming routines. The insert’s thickness code and form ensure repeatable clamping and runout behaviour, which supports consistent surface finish and dimensional accuracy. Because the grade and chipbreaker are optimised for thermal load and adhesion control, tool life is extended and insertion frequency is reduced, helping to lower tooling consumption per part. Typical applications and handling recommendations Designed primarily for turning of stainless steels (ISO M) and heat‑resistant alloys/titanium (ISO S), this insert suits shoulder turning, face turning and interrupted cuts where edge security is required. Use coolant or appropriate cutting parameters for the chosen workpiece and ensure the toolholder provides rigid support to exploit the full potential of the Tiger·tec Silver coating. For programming, account for the square geometry when planning tool approach to maintain consistent corner engagement. For tailored cutting data, availability checks or to reserve Walter Tools SNMG120416-RM5 WSM20S inserts for your next production run, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for immediate technical guidance and ordering support. Technical data Article number: SNMG120416-RM5-WSM20S-WALTER Designation: SNMG120416-RM5 WSM20S Series: Tiger-tec Silver Manufacturer: Walter Tools Product type: indexable turning insert Facts Corner radius: 1.6 mm Inscribed circle / size: 12 Thickness: 04 Free cutting angle: 0° (negative) Special features Grade: WSM20S (coated carbide) Chipbreaker: RM5 Form: Square 90° Tolerance class: M Execution: G Material suitability: stainless steels (M), superalloys/titanium (S) FAQ What materials is this insert suited for? The SNMG120416-RM5 WSM20S insert is specified for ISO M (stainless steels) and ISO S (heat‑resistant superalloys and titanium), where the WSM20S grade and Tiger·tec Silver coating deliver thermal resistance and edge stability. How does the RM5 chipbreaker help in production? The RM5 chipbreaker provides consistent chip segmentation and evacuation, reducing interruptions and enabling longer uninterrupted machining cycles with the SNMG120416-RM5 WSM20S from Walter Tools. Can this insert handle interrupted cuts? Yes. The 0° negative rake and robust square geometry make the insert particularly suitable for interrupted cuts and heavy shoulder turning, supporting secure edge performance under shock loads. What should be considered when selecting cutting data? Cutting speeds and feeds should be chosen according to the workpiece material and toolholder rigidity; the WSM20S grade tolerates elevated temperatures, but correct coolant and stable clamping will optimise tool life and surface finish. Is this an original Walter Tools product? This article is offered as an original factory‑new insert from Walter Tools; batch and quality data are available on request for traceability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is a globally recognised manufacturer of precision cutting tools and is part of the Sandvik group. Brand names and protected trademarks mentioned are the property of their respective owners and are used solely for explanation. There is no affiliation implied between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
SNMG120416-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coated carbide, a secure RM5 chipbreaker and a robust 1.6 mm corner radius for stable machining of difficult-to-cut materials; order directly via Metav Werkzeuge or ask the consultants if additional data is required. SNMG120416-RM5 WSM30S indexable turning insert — for rostfreier Stahl and superalloys (Tiger·tec Silver) by Walter Tools SNMG120416-RM5 WSM30S is an indexable turning insert designed for high demands in machining rostfreier Stahl and heat-resistant alloys, offering a coated-carbide grade optimised for secure chip formation and long tool life. Tiger·tec Silver coated carbide grade WSM30S Optimised for rostfreier Stahl and superalloys Square 90° format with 1.6 mm corner radius Negative 0° relief with RM5 chipbreaker Consistent performance on difficult-to-cut alloys The SNMG120416‑RM5 WSM30S combines the Tiger·tec Silver coating with a high-performance WSM30S grade to address the thermal and mechanical challenges of machining rostfreier Stahl and superalloys. The coating enhances heat resistance and wear behaviour, which in turn supports stable edge retention under high temperatures. For production environments this means fewer interruptions for tool change‑overs and a measurable increase in process reliability and productivity. The use of a coated carbide substrate ensures predictable wear patterns and easier reconditioning where applicable. Geometry and chip control engineered for stability The insert’s square 90° format and 1.6 mm corner radius provide a sturdy cutting edge that tolerates higher feed rates and interrupted cuts while maintaining dimensional stability. The RM5 chipbreaker is developed to promote short, controllable chips and to reduce the risk of built-up edge when working with sticky or gummy materials. The negative 0° relief gives a robust cutting geometry suited to heavier roughing passes and applications where edge security is paramount. Together these characteristics reduce rework and improve first-pass yield in serial production. Practical advantages for process security and productivity Choosing this grade delivers clear process benefits: improved chip control, reduced tool-change frequency, and enhanced productivity in component series where material behaviour is challenging. The insert’s specification (size 12, thickness code 04) and tolerance class M make it suitable for standard toolholder systems that accept SNMG formats, enabling quick integration into existing setups. Where geometry variations are required, the same grade concept supports alternative insert shapes to match finishing or profiling operations while retaining the core benefits of Tiger·tec Silver technology. For machining rostfreier Stahl and heat-resistant alloys with a focus on stable cutting and predictable tool life, contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver inserts or request tailored application advice from our consultants at Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: SNMG120416-RM5-WSM30S-WALTER Designation: SNMG120416-RM5 WSM30S Manufacturer: Walter Tools Product type: Indexable turning insert Grade: WSM30S Series: Tiger-tec Silver Shape: Square 90° Size: 12 Corner radius: 1.6 Relief angle: 0° (negative) Chipbreaker: RM5 Thickness: 04 Material suitability: S / M Tolerance class: M Execution: G Facts Corner radius: 1.6 mm Relief angle: 0° (negative) Plate size: 12 Thickness code: 04 Shape angle: 90° Tolerance class: M Special features Coating technology: Tiger·tec Silver Grade type: WSM30S (coated carbide) Chip control: RM5 chipbreaker Format: Square 90° Application focus: rostfreier Stahl and superalloys FAQ Which materials is this insert suitable for? The insert is designed for machining rostfreier Stahl (M) and heat-resistant superalloys/titanium (S), reflecting the WSM30S grade and Tiger·tec Silver coating tailored to those material groups. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes short, controlled chips and reduces the tendency for built-up edge during operations on adhesive alloys, improving surface finish and tool life. What advantages does the square 90° format offer? The square 90° format with a 1.6 mm corner radius provides a strong cutting edge suitable for heavier cuts and offers multiple indexable edges, which supports longer in-cycle use and predictable wear behaviour. Is this insert suitable for roughing and finishing? The negative 0° relief and sturdy geometry make the insert particularly well suited to robust roughing operations; depending on machine setup and insert geometry variations, the same grade concept can be adapted for finishing passes. What does the WSM30S grade contribute to process reliability? WSM30S, paired with the Tiger·tec Silver coating, delivers enhanced heat resistance and edge stability, which increases process security and reduces unplanned downtime in serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120416-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the robust WPP10G grade for steady performance in Stahl turning. The combination of the RP5 chipbreaker with a 1.6 mm corner radius delivers consistent chip control and reliable edge life. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. SNMG120416-RP5 WPP10G Drehwendeschneidplatte – for Stahl machining, Tiger‑tec Gold (Walter Tools) SNMG120416-RP5 WPP10G is a square indexable turning insert designed for general Stahl turning operations, combining a coated Hartmetall grade with a chipbreaker optimised for stable material removal. Tiger‑tec Gold coating for extended life RP5 chipbreaker for controlled chips Square SNMG geometry for strong corners 1.6 mm corner radius for heavy cuts Longer tool life through advanced coating technology The combination of the Tiger‑tec Gold coating and the WPP10G grade provides a measurable improvement in wear resistance and thermal stability compared with uncoated grades. This coated Hartmetall composition reduces flank wear under the high temperatures typical of Stahl machining, which means fewer insert changes and longer uninterrupted machining cycles. The result is a dependable cutting edge that preserves dimensional stability and minimises unexpected interruptions in production. Reliable chip formation and improved surface quality Engineered with the RP5 chipbreaker and a square SNMG geometry, the insert ensures consistent chip segmentation and evacuation during a wide range of turning operations. The 1.6 mm corner radius increases insert strength for heavier cuts while the 0° (negative) relief supports robust facing and turning where cutting forces are high. Together these features promote a stable process, improving surface finish and reducing the need for rework. Optimised for Stahl according to ISO guidance Designed for the ISO P group, this insert is tailored to the thermal and mechanical challenges of machining Stahl. The WPP10G sort is balanced to perform across common Stahl grades, offering a compromise between wear resistance and toughness suitable for serial production and batch work. Reference to ISO 513 confirms the intended material group and helps in selecting cutting data and speeds that match the insert’s capabilities. Practical compatibility and production benefits The SNMG120416-RP5 format delivers a widely used inscribed circle and seating form that fits standard toolholders, enabling straightforward integration into existing tool systems. Its placement in the Tiger‑tec Gold series supports stable edge behaviour and consistent part-to-part results, which aids process planning and spare-part logistics. Reduced tool change frequency and predictable wear behaviour contribute to improved machine uptime and lower total machining cost per component. For production environments requiring a versatile, wear‑resistant turning solution from Walter Tools, contact Metav Werkzeuge for tailored recommendations and ordering assistance. Technical data Article number: SNMG120416-RP5-WPP10G-WALTER Product: Drehwendeschneidplatte (turning insert) Grade: WPP10G Series: Tiger‑tec Gold Manufacturer: Walter Tools Core measurements Inscribed circle / size: 12 mm Corner radius: 1.6 mm Free angle: 0° (negative) Thickness code: 04 Tolerance class: M Designs & special features Coating: Tiger‑tec Gold Substrate: coated Hartmetall (carbide) Chipbreaker: RP5 Plate shape: Square 90° Material application: Stahl (ISO P group) FAQ What materials is this insert intended for? The SNMG120416-RP5 WPP10G is specified for Stahl (ISO P group), designed to cope with the typical heat and chip characteristics of steel machining. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes controlled chip formation and evacuation, which improves process stability and surface finish during turning operations. Is the SNMG120416-RP5 suitable for heavy roughing cuts? Yes, the square SNMG geometry combined with a 1.6 mm corner radius gives the insert greater strength for heavier cuts and interrupted cuts in Stahl. What advantage does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, extending edge life and reducing the frequency of insert changes. Can this insert be used in standard toolholders? The SNMG form is industry standard; the SNMG120416-RP5 fits common toolholders designed for SNMG inserts, enabling straightforward replacement in existing setups. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120416-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the universal WPP20G grade for consistently productive machining of Stahl; the robust RP5 chipbreaker and the square 90° form ensure stable cutting and reproducible results. Order directly via Metav Werkzeuge or consult the Metav team for application support. SNMG120416-RP5 WPP20G turning indexable insert — Walter Tools, Tiger·tec Gold coated for Stahl SNMG120416-RP5 WPP20G is a square 90° indexable insert designed for turning applications on Stahl, offering a universal balance of wear resistance and toughness for diverse workshop tasks Tiger·tec Gold coating for extended tool life Universal WPP20G grade for Stahl machining Square 90° geometry with 1.6 mm corner radius RP5 chipbreaker for reliable chip control Stable cutting performance for Stahl components The coated carbide composition within the Tiger·tec Gold family provides a controlled wear behaviour that translates directly into operational stability when machining Stahl. The insert’s RP5 chipbreaker is engineered to manage heat and chip formation typical for unalloyed and alloyed steels, reducing the risk of built-up edge and enabling reproducible cutting forces. For production environments where cycle times and repeatability matter, this geometry supports predictable process windows and fewer unplanned tool changes, which benefits throughput and part consistency. Reliable edge life and surface quality under load With a 1.6 mm corner radius and square 90° form, the insert offers a compromise between robustness and finishing capability: the larger corner supports interrupted cuts and heavy engagements while still permitting acceptable surface finishes on turned components. The 0° (negative) rake angle increases cutting-edge strength for demanding cuts and feed rates, so operators achieve steady flank wear progression and longer indexable life. When surface quality is a priority, this combination of grade and geometry helps maintain dimensional integrity without sacrificing tool longevity. Process security and practical application guidance The WPP20G grade is classified as a universal choice for the machining of Stahl under ISO 513 group P, addressing a broad range of steel types and typical heat-generation scenarios in turning. The insert is particularly suitable where a balance between wear resistance and toughness is required—applications include medium-heavy roughing and general finishing passes. For optimal results, pair the insert with toolholders specified for SNMG geometry and select cutting parameters that align with the workpiece alloy and rigidity of the machine setup; this approach improves chip flow, reduces tool costs per part and enhances overall machining reliability. Contact Metav Werkzeuge for tailored advice and order support — Metav’s consultants provide application recommendations and delivery options to integrate this Walter Tools insert into existing machining processes Technical data Article number: SNMG120416-RP5-WPP20G-WALTER Designation: SNMG120416-RP5 WPP20G Manufacturer: Walter Tools Facts Plate form: Square 90° Plate size: 12 mm Plate thickness: 04 Corner radius: 1.6 mm Rake angle: 0° (negative) Chipbreaker: RP5 Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP20G — universal for Stahl (ISO P) Execution: G Series: Tiger-tec Gold Tolerance class: M FAQ What materials is this insert designed for? The SNMG120416-RP5 WPP20G insert from Walter Tools is designed primarily for machining Stahl as specified by ISO 513 group P. How does the RP5 chipbreaker influence performance? The RP5 chipbreaker provides controlled chip formation for Stahl, aiding heat dissipation and reducing the likelihood of built-up edge during continuous turning operations. Is the insert suitable for heavy cutting or finishing? Yes. The square 90° geometry with a 1.6 mm corner radius and 0° negative rake offers the robustness needed for heavier cuts while still delivering acceptable surface quality in finishing passes. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Walter Tools is part of the Walter AG group. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG120416-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold wear resistance of the WPP30G grade with the RP5 chipbreaker and a robust 1.6 mm corner radius delivers stable chip formation and extended edge life for steel turning; order the insert directly via Metav Werkzeuge or consult their technical advisors for application-specific guidance. SNMG120416-RP5 WPP30G — Indexable turning insert for Steel (Tiger·tec Gold) by Walter Tools The SNMG120416-RP5 WPP30G is an indexable turning insert intended for machining steel, combining a Tiger·tec Gold coated carbide grade with an RP5 chipbreaker for reliable chip control in general-purpose and demanding turning operations. Tiger·tec Gold coated grade WPP30G RP5 chipbreaker for stable chips Square 90° form for shoulder turning 1.6 mm corner radius for robust edges Greater productivity through wear-resistant grade and coating The combination of the WPP30G carbide grade and the Tiger·tec Gold coating is designed to improve tool life under typical steel cutting conditions. Coated carbide provides a harder, more wear-resistant surface, which delays flank wear and extends the number of inserts per edge change. For production environments where consistent cycle times matter, this results in fewer tool changes and more uptime. The insert’s specification targets the ISO P group (steel), so process parameters can be tuned toward higher material removal rates while maintaining surface integrity. Stable chip control and process security for consistent results The engineered RP5 chipbreaker delivers controlled chip formation and evacuation, reducing the risk of entangling long chips and helping to maintain a predictable cutting load. Combined with the 0° (negative) relief geometry and a square 90° form, the design favours edge stability during shoulder cuts and interrupted cuts. The 1.6 mm corner radius further supports a robust cutting edge that tolerates higher feeds without rapid edge degradation. This translates into steady component quality and reduced scrap rates for batch and single‑piece production alike. Practical compatibility and straightforward integration in workshops This indexable insert is suitable for a wide range of steel grades as defined by the ISO P classification, making it a versatile choice for general turning, finishing and medium‑heavy roughing tasks. The insert’s tolerance class M ensures consistent seating in toolholders and predictable repeatability across re‑indexing operations. For those less familiar with chipbreaker terminology: the RP5 geometry shapes the chips so they break into short, manageable segments, aiding coolant access and simplifying chip disposal. The format simplifies tool inventory planning and supports rapid replacement during shift work. For reliable steel turning with Tiger·tec Gold performance, contact Metav Werkzeuge for tailored technical advice and procurement of Walter Tools inserts Technical data Article number: SNMG120416-RP5-WPP30G-WALTER Designation: SNMG120416-RP5 WPP30G Type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.6 mm Size / inscribed circle: 12 Thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Grade / coating: WPP30G, Tiger·tec Gold (coated carbide) Chipbreaker: RP5 Form: Square 90° Material application: Steel (ISO P) Design intent: Stable chip formation, extended edge life FAQ Which materials are suitable for this insert? The SNMG120416-RP5 WPP30G insert (Walter Tools indexable turning insert) is specified for the ISO P group and is intended primarily for machining steel in a wide range of general turning operations. What advantage does the Tiger·tec Gold grade provide? The WPP30G grade in Tiger·tec Gold technology offers improved wear resistance and a tougher coated surface, helping the SNMG120416-RP5 WPP30G to maintain cutting performance over longer tool life compared with uncoated grades. How does the RP5 chipbreaker affect machining performance? The RP5 chipbreaker on this insert promotes short, controlled chips and reliable evacuation, which supports consistent cutting forces and reduces interruptions due to chip management when turning steel. Is this insert suitable for shoulder cuts and interrupted cutting? Yes — the square 90° form combined with a 1.6 mm corner radius and 0° (negative) relief gives the SNMG120416-RP5 WPP30G a robust edge that handles shoulder machining and moderate interruptions with enhanced edge security. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer.
SNMG120416-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold grade with the RP7 chipbreaker delivers long tool life and consistent chip control for steel turning; the square 90° form and 1.6 mm corner radius provide robust edge strength for reliable production. Order the insert directly via Metav Werkzeuge or consult our machining specialists for application-specific cutting data. SNMG120416-RP7 WPP10G Turning Insert (Tiger‑tec Gold) — Walter Tools The SNMG120416-RP7 WPP10G is a square 90° indexable turning insert engineered for productive steel machining, offering a wear‑resistant coating and a sturdy negative rake geometry. Tiger‑tec Gold coated grade WPP10G RP7 chipbreaker for stable chip control Square 90° insert with 1.6 mm corner radius Negative 0° rake for robust cutting Proven wear resistance for uninterrupted production The combination of the Tiger‑tec Gold coating and the WPP10G grade gives a balanced performance between wear resistance and toughness. This makes the insert particularly suitable for a wide range of steel machining tasks (ISO P), where heat and abrasive wear are common. The coated carbide substrate enhances abrasive resistance while the coating reduces adhesion and built‑up edge, which together extend cutting life and reduce unplanned stoppages. For production environments seeking predictable tool change intervals and consistent part quality, this grade supports efficient process planning and cost control. Stable chip control and a secure cutting edge for demanding turns The RP7 chipbreaker is designed to shape chips reliably during conventional turning operations, helping to avoid entanglements and machine downtime. Coupled with a negative 0° rake, the insert provides a reinforced cutting edge that tolerates interrupted cuts and heavier depths of cut better than positive rake alternatives. The square 90° geometry and 1.6 mm corner radius increase edge strength for roughing or mixed finishing operations, delivering dimensional stability and repeatable surface results even under fluctuating loads. These design choices favour robustness and process security over marginal gains in light finishing scenarios. Practical benefits on the shop floor and application notes As an indexable insert, the SNMG120416‑RP7 WPP10G simplifies inventory and changeover procedures: four usable corners per insert reduce replacement frequency and maintain consistent set‑ups. The insert’s specification — square form, M tolerance class and RP7 chip control — suits general turning centres and lathes focusing on steel components across broad material subgroups. While cutting parameters depend on machine rigidity and workpiece specifics, the insert’s balanced coated carbide composition supports a broad speed and feed window for stable operation. For customers aiming to increase throughput while safeguarding surface integrity, this insert offers a practical compromise between performance and tool life. For application advice, availability and precise cutting recommendations for the Walter Tools SNMG120416‑RP7 WPP10G, contact Metav Werkzeuge for swift, practice‑orientated assistance and supply information Technical data Article number: SNMG120416-RP7-WPP10G-WALTER Designation: SNMG120416-RP7 WPP10G Product type: Drehwendeschneidplatte (turning insert) Brand: Walter Tools Series: Tiger‑tec Gold Facts Plate size: 12 mm Plate thickness: 4 mm Corner radius: 1.6 mm Free angle: 0° (negative) Plate form: Square 90° Tolerance class: M Special features Grade: WPP10G (coated carbide) Chipbreaker: RP7 Material application: Steel (ISO P) Robust negative rake geometry Square 90° format for secure seating Four cutting corners per insert FAQ What materials is this insert best suited for? The SNMG120416‑RP7 WPP10G is optimised for steel (ISO P) applications, making the Walter Tools indexable insert a reliable choice for unalloyed and alloyed steels. How does the RP7 chipbreaker influence machining? The RP7 chipbreaker shapes chips for predictable evacuation and reduces risk of chip entanglement; the SNMG120416‑RP7 WPP10G therefore improves process stability during continuous turning. Can this insert handle interrupted cuts? Yes. The negative 0° rake and square geometry with a 1.6 mm corner radius give the insert enhanced edge strength, which is advantageous for interrupted and heavy cut conditions. Is the Tiger‑tec Gold coating important for tool life? The Tiger‑tec Gold coating on the WPP10G grade provides improved wear resistance and surface protection, extending service life under the thermal and abrasive stresses typical of steel machining. How many usable cutting edges does the insert offer? As a square 90° indexable insert, the SNMG120416‑RP7 WPP10G provides four usable corners, supporting efficient replacements and predictable set‑ups. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is original, brand‑new and factory‑new from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG120416-RP7 WPP20G G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the RP7 chipbreaker and a robust 1.6 mm corner radius for stable, economical steel turning; the negative 0° relief supports heavy cuts and reliable tool life. Order the insert directly via Metav Werkzeuge or consult our technical team for application advice. SNMG120416-RP7 WPP20G — Turning insert, Tiger·tec Gold, RP7 (Walter Tools) SNMG120416-RP7 WPP20G is a square 90° turning insert designed for steel machining, offering a coated carbide grade and an RP7 chipbreaker for controlled chip formation Tiger·tec Gold coating for long tool life RP7 chipbreaker for predictable chip control 1.6 mm corner radius for robust cutting edge Negative 0° relief for heavy-duty turning Maximise productivity in steel turning The Tiger·tec Gold WPP20G grade combines a coated carbide substrate with a surface engineering that reduces flank and crater wear, which translates into fewer insert changes and lower cost per part. The RP7 chipbreaker is tuned for the ISO P group, providing stable chip control when machining unalloyed and alloyed steel, so cycle times remain consistent even under varying cut conditions. The result is measurable productivity gains through extended in-process reliability. Consistent component quality and edge security A 1.6 mm corner radius together with a negative 0° relief delivers a robust cutting edge that resists chipping during interrupted cuts and roughing operations. This geometry supports constant contact conditions and helps maintain surface finish across successive components. The coated grade mitigates thermal and abrasive wear, offering reproducible dimension and surface-quality outcomes over longer tool life, which reduces downtime and inspection effort. Practical application advice for reliable machining The insert is optimised for typical heat generation and chip formation when turning steel (ISO P). Its square 90° form and listed dimensions allow flexible clamping in common toolholders for facing, longitudinal turning and medium-depth cutting. For best results, pair the insert with stable toolholders and appropriate cutting parameters tailored to the workpiece alloy; the combination of Tiger·tec Gold coating and RP7 chipbreaker supports both roughing and general-purpose operations with low risk of built-up edge. For tailored recommendations on integrating the SNMG120416-RP7 WPP20G into production, contact Metav Werkzeuge for availability and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: SNMG120416-RP7-WPP20G-WALTER Designation: SNMG120416-RP7 WPP20G Type: Turning insert Series: Tiger-tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 04 Corner radius: 1.6 Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RP7 Plate form: Square 90° Grade type: Coated carbide Application group: Steel (ISO P) Series description: Tiger·tec Gold FAQ What materials is this insert suitable for? The SNMG120416-RP7 WPP20G is designed primarily for the ISO P group and is suitable for unalloyed and alloyed steel; the WPP20G grade is optimised for steel machining. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker provides predictable chip formation and evacuation when turning steel, improving process stability and reducing the chance of entangling or long chips. What benefit does the 1.6 mm corner radius provide? A 1.6 mm corner radius gives a robust cutting edge that resists chipping under heavy or interrupted cuts, supporting longer tool life and consistent surface quality. Is this insert suitable for roughing and finishing operations? Yes, the combination of the Tiger·tec Gold coating and the RP7 chipbreaker makes the insert versatile for general-purpose turning, including medium roughing and finishing within steel machining applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered article is original, factory-new merchandise from Walter Tools.
SNMG120416-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating and the WPP30G grade for dependable steel machining, together with the RP7 chipbreaker for controlled chip formation and extended tool life; order the insert via Metav Werkzeuge or consult the technical team for application-specific guidance. SNMG120416-RP7 WPP30G indexable turning insert (for steel) — Tiger·tec Gold, RP7 | Walter Tools The SNMG120416-RP7 WPP30G is a square 90° indexable turning insert designed for robust steel machining applications, combining a Tiger·tec Gold coated, RP7 chipbreaker geometry that prioritises consistent cutting and predictable tool life. SNMG format 12 mm, square 90° Tiger·tec Gold coated WPP30G grade RP7 chipbreaker for controlled chips 1.6 mm corner radius for robust edges Reliable performance for steel turning with Tiger·tec Gold The SNMG120416-RP7 WPP30G insert is engineered specifically for the machining of steel (ISO group P) and benefits from the Tiger·tec Gold coating technology. This combination delivers improved tool life and wear resistance under the thermal and mechanical loads typical of steel turning. The WPP30G grade is tuned for a balance of toughness and wear resistance, making it suitable for a wide range of steel alloys and cutting conditions. The RP7 chipbreaker promotes stable chip control, which reduces the risk of surface damage and secures more predictable cycle times in production environments. Geometry and edge design that protect the cutting edge and surface finish With a 90° square form and a 1.6 mm corner radius, the insert offers a robust edge for general turning and semi-roughing operations while still enabling acceptable surface quality. The negative 0° rake provides edge strength for heavy cuts and interrupted surfaces, reducing the likelihood of edge chipping in demanding conditions. The SNMG 12 format ensures compatibility with common turning toolholders, and the combination of geometry and coating translates into fewer insert changes and more time at cut, supporting sustained productivity on the shop floor. Process benefits that translate into predictable productivity The graded construction and optimised chipbreaker deliver process reliability through consistent metal removal rates and stable cutting forces. In practice, this reduces unscheduled tool changes and contributes to lower cycle-time variability. For operations seeking to standardise tooling, the ISO-based designation simplifies inventory management and tool selection. For application-specific parameters such as feeds, speeds and depth of cut, Metav Werkzeuge’s technical consultants can assist with cutting data to match the WPP30G grade to the workpiece and machine conditions, helping to protect cycle economy and part quality. Contact Metav Werkzeuge today for tailored Walter Tools recommendations on Tiger·tec Gold inserts and application-specific cutting data for steel machining Technical data Article number: SNMG120416-RP7-WPP30G-WALTER Label: Drehwendeschneidplatte SNMG120416-RP7 WPP30G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP30G Facts Insert size: 12 Corner radius: 1.6 mm Relief angle: 0° (negative) Shape: Square 90° Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: RP7 Material group: P (steel) Grade type: coated cemented carbide Designation: SNMG120416-RP7 Series description: WPP30G is a Walter cutting grade optimised for steel machining FAQ What materials is this insert intended for? The SNMG120416-RP7 WPP30G insert is designed for steel applications (ISO group P); the WPP30G grade and Tiger·tec Gold coating are tuned to the thermal and chip-formation characteristics of steel. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker offers controlled chip formation and evacuation, improving surface integrity and reducing the risk of chip-related interruptions during turning with the SNMG120416-RP7 insert. Is the insert suitable for interrupted cuts or heavy roughing? Yes; the 90° square form, 1.6 mm corner radius and negative 0° rake deliver edge strength and robustness that make the insert appropriate for interrupted cuts and demanding roughing tasks. Which toolholders are compatible with this insert format? The SNMG120416-RP7 follows the standard SNMG geometry and is compatible with toolholders engineered for SNMG 12 inserts; selection of a rigid holder is recommended to exploit the grade’s performance. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
SNMG150608-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the MP5 chipbreaker for consistent productivity and extended tool life; the SNMG150608‑MP5 WPP20G provides stable chip formation and reliable edge security in steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants for process-specific advice. SNMG150608-MP5 WPP20G – Square 90° indexable turning insert, Tiger‑tec Gold, Walter Tools A SNMG150608‑MP5 WPP20G is a square 90° indexable turning insert designed for machining steel, featuring a Tiger‑tec Gold coated carbide grade and an MP5 chipbreaker for controlled chips. Tiger‑tec Gold coated carbide grade WPP20G MP5 chipbreaker for controlled chip formation Square 90° geometry for versatile turning 0.8 mm corner radius for robust edge life Increased productivity through wear‑resistant coating The Tiger‑tec Gold coating combined with the WPP20G carbide grade delivers improved wear resistance and longer service intervals when machining steels. This coating technology enhances thermal stability at the cutting edge, which reduces flank and crater wear under typical turning conditions for group P (steel) materials. As a result, the insert supports steady machining cycles and contributes to predictable tool life, making it suitable for medium to high‑volume production where process reliability matters. Controlled chips and consistent surface quality Designed with the MP5 chipbreaker and a 0° (negative) relief angle, the insert ensures reliable chip formation and evacuation on a wide range of steels. The square 90° geometry combined with the 0.8 mm corner radius provides a robust cutting edge that resists chipping while maintaining acceptable surface finishes in both roughing and semi‑finishing operations. Stable chip control reduces interruptions and improves operator safety, which in turn helps maintain component quality on demanding turning tasks. Clear application guidance and process security Marked tolerance class M and the compact SNMG150608‑MP5 form factor make this insert well suited for general turning operations in unalloyed and alloyed steels as defined for ISO group P. With a nominal plate size of 15 and thickness designation 06, the insert fits standard toolholders for versatile workshop use. For tailored feeds, speeds and holder recommendations, technical consultation is available to ensure the insert achieves optimal performance in specific setups and workpiece materials. For process‑secure steel turning with Walter Tools' Tiger‑tec Gold grade, contact Metav Werkzeuge for detailed machining parameters and availability. Technical data Article number: SNMG150608-MP5-WPP20G-WALTER Item designation: SNMG150608-MP5 WPP20G Manufacturer: Walter Tools Facts Plate size: 15 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Special features Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker type: MP5 Geometry: Square 90° Material suitability: P (steel) Tolerance class: M FAQ What materials is this insert intended for? The SNMG150608‑MP5 WPP20G is specified for ISO group P materials, meaning it is designed primarily for machining various steels, including unalloyed and alloyed steels. How does the MP5 chipbreaker influence performance? The MP5 chipbreaker on the SNMG150608‑MP5 controls chip shape and evacuation, reducing the risk of entanglement and supporting steady cutting conditions for improved process reliability. What advantages does the Tiger‑tec Gold grade offer? Tiger‑tec Gold coating on the WPP20G grade increases thermal and wear resistance, which extends tool life and supports consistent performance under typical steel turning conditions. Is the insert suitable for finishing and semi‑finishing? With a 0.8 mm corner radius and square 90° geometry, the insert provides a robust edge suitable for semi‑finishing and many finishing operations where moderate radii are acceptable. How many usable cutting edges does the insert provide? The square geometry of the SNMG150608‑MP5 WPP20G allows multiple indexings of the cutting edge, enabling efficient use of available edges before disposal. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
SNMG150612-MK5 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of WKK10S grade and Tiger·tec Silver coating for high wear resistance and stable chip formation in cast-iron machining; the MK5 chipbreaker further improves chip control and process reliability. Order genuine Walter Tools inserts directly via Metav Werkzeuge or contact our consultants for tailored technical advice. SNMG150612-MK5 WKK10S – indexable turning insert, Tiger·tec Silver coating for cast-iron The SNMG150612-MK5 WKK10S is a square 90° indexable turning insert designed for robust and predictable machining of cast iron components. Tiger·tec Silver coating for wear resistance WKK10S grade optimised for cast iron MK5 chipbreaker for controlled chip formation Square 90° form with 1.2 mm corner radius Precision and productivity for cast-iron workflows This insert delivers consistent tool life and reduced process variability through a combination of a wear-resistant Tiger·tec Silver coating and the WKK10S cutting grade. The coating lowers friction and improves heat resistance, which is particularly beneficial when machining abrasive cast-iron alloys where rapid flank wear can shorten tool life. By choosing a grade tailored to K-materials, the insert helps maintain dimensional accuracy over longer production runs, reducing unplanned tool changes and increasing overall productivity. Secure chip formation and stable cutting performance Equipped with the MK5 chipbreaker and a square 90° geometry, the component promotes predictable chip control, reducing the risk of long or tangled chips in batch operations. The 1.2 mm corner radius supports stable cutting edges and improved strength at the nose, while the 0° negative rake (negative free angle) increases robustness for interrupted cuts and heavy roughing. These design choices combine to enhance process stability and make the insert suitable for demanding finishing and semi-finishing tasks on cast iron. Adaptability and operational benefits for shops The insert’s specification—compact 15 mm seat geometry and standardised form—facilitates quick tool changes and compatibility with a wide range of toolholders that accept SNMG-shaped indexable inserts. Using a grade optimised for cast iron means fewer rejects and less rework, translating into measurable cost savings per part. The engineering behind this insert focuses on practical machining outcomes: longer intervals between indexings, consistent surface quality, and reliable cycle times in serial production environments. Application advice and material suitability Optimised explicitly for cast iron, this insert is not rated for stainless steels or high-alloy steels in the provided data; it should therefore be specified where Gusseisen is the primary workpiece material. The cutting concept is aimed at managing the short, brittle chips typical of cast-iron machining and at resisting abrasive wear. For specific cutting parameters or to verify compatibility with a particular machine setup, consult technical guidance to align speeds and feeds with workpiece grade and clamping conditions. For availability of genuine Walter Tools SNMG150612-MK5 WKK10S inserts and expert guidance on integrating them into a production process, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-oriented advice Technical data Article number: SNMG150612-MK5-WKK10S-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert / Drehwendeschneidplatte Series: Tiger-tec Silver Grade/sort: WKK10S Facts Corner radius: 1.2 mm Plate size: 15 mm Plate form: Square 90° Free angle: 0° (negative) Chipbreaker: MK5 Tolerance class: M Plate thickness code: 06 Special features Coating: Tiger·tec Silver Material focus: cast iron (K) Suitability: optimised for abrasive wear and short, breaking chips Geometry: robust square insert for stable cutting FAQ Is this insert suitable for cast-iron machining? Yes, the SNMG150612-MK5 WKK10S insert is explicitly optimised for cast-iron (K) applications and the WKK10S grade is tuned for abrasive wear typical of Gusseisen. What chip control does the insert provide? The MK5 chipbreaker integrated in the insert promotes controlled chip formation, improving safety and surface quality during continuous and interrupted cuts. What is the geometry and corner radius of the insert? The insert is a square 90° form with a 1.2 mm corner radius, designed to balance edge strength and surface finish. Does the insert have a coating? Yes, the insert uses the Tiger·tec Silver coating combined with the WKK10S grade to enhance wear resistance and thermal stability during cast-iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150612-MK5 WKK20S Wendeplatten - Walter Tools
Benefit from the combination of durable coated carbide, reliable chip control and high process stability for efficient turning of cast iron components; this insert reduces downtime and tooling cost while delivering consistent surface quality. Order directly via Metav Werkzeuge or consult the technical team for process recommendations. SNMG150612-MK5 WKK20S indexable insert — Tiger·tec Silver, for cast iron (Walter Tools) The SNMG150612-MK5 WKK20S is a square 90° indexable turning insert engineered for productive machining of cast iron, combining a specialised chipformer with a robust coated-carbide grade. Tiger·tec Silver coating for long tool life Grade WKK20S optimised for cast iron Square 90° form with 1.2 mm corner radius MK5 chipbreaker for controlled chip formation Consistent wear resistance for predictable process efficiency The combination of Tiger·tec Silver coating and the WKK20S grade results in a coated carbide insert that is optimised to resist abrasive wear typical of cast iron machining. This chemistry and coating pairing extends tool life under intermittent cutting conditions and supports steady cutting parameters, which in turn reduces unexpected tool changes and improves overall machine utilisation. The result is measurable productivity gains and a lower cost per component through longer edge life and fewer interventions. Stable, controlled chips for safer, faster turning of cast iron Engineered specifically for material group K (cast iron), the insert’s MK5 chipbreaker delivers short, easy-to-manage chips that reduce the risk of tangling and enable higher feed rates in many operations. The chipformer is designed to match the brittle chip behaviour of cast irons, converting short breakage into stable evacuation. This stability helps maintain uninterrupted cycles and contributes to consistent surface finish without complex toolpath adjustments. Robust geometry that supports reliable setups and repeatable quality The square 90° plate geometry with a 1.2 mm corner radius and negative rake 0° gives a strong cutting edge and predictable wear progression. This geometry simplifies indexing strategy—four usable cutting edges per insert—while the corner radius balances edge strength and surface integrity. The insert’s format supports straightforward clamping and repeatable alignment, which reduces setup time and supports stable tolerances in serial production. Practical choice backed by recognised tooling expertise As an application-focused turning solution, this insert is suited for demanding cast-iron operations where process reliability and ease of use matter. The combination of grade, coating and chipbreaker means fewer trial cuts and accelerated ramp-up to production parameters. For additional application support, Metav Werkzeuge offers process advice and cutting-data recommendations to match machine and component requirements. Contact Metav Werkzeuge for tailored cutting data and ordering of Walter Tools inserts – expert consultation and fast delivery guidance available from Metav Werkzeuge. Technical Data SKU: SNMG150612-MK5-WKK20S-WALTER Product: Indexable turning insert SNMG150612-MK5 WKK20S Manufacturer: Walter Tools Grade: WKK20S Series: Tiger·tec Silver Core data Insert shape: Square 90° Inscribed circle / size: 15 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MK5 Coating technology: Tiger·tec Silver (coated carbide) Primary application: cast iron Execution: G Plate form: Quadrat 90° FAQ What materials is this insert intended for? This insert is intended primarily for cast iron applications; the WKK20S grade and Tiger·tec Silver coating are tuned for abrasive wear and the short, breaking chips typical of cast iron. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker produces short, controlled chips in cast iron turning, improving chip evacuation and enabling steadier feeds and safer operation with less manual intervention. Can the insert be indexed to use multiple cutting edges? Yes, the square 90° geometry provides four usable cutting edges per insert, allowing fast indexing and reduced tooling cost per edge. Which features contribute most to tool life? The combination of the Tiger·tec Silver coating and the WKK20S coated-carbide grade delivers high abrasive-wear resistance and a stable cutting edge, which together extend effective tool life in cast iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG150612-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant Tiger‑tec Gold grade, precise MP5 chip control and a robust square geometry for consistent steel turning results; order genuine Walter Tools inserts via Metav Werkzeuge or request application support for optimal process setup. SNMG150612-MP5 WPP20G turning insert for steel by Walter Tools The SNMG150612-MP5 WPP20G is a square 90° turning insert designed for reliable steel machining, combining the Tiger‑tec Gold coated grade with an MP5 chipbreaker for stable chip formation and long tool life. Tiger‑tec Gold coated grade WPP20G Optimised MP5 chipbreaker for stable chips Square 90° insert, 1.2 mm corner radius Designed for steel machining (ISO P) Consistent productivity for steel turning The specified Tiger‑tec Gold grade delivers a balanced combination of wear resistance and toughness tailored to steel applications (ISO P). This insert's coated carbide formulation helps reduce flank wear and extend tool life under typical turning temperatures, which translates into fewer indexings and lower tool-handling time. For production environments where cycle time and reproducibility are critical, the coated grade offers measurable gains in process stability and predictable component quality. Stable chip control and secure cutting edge The MP5 chipbreaker is engineered to produce short, manageable chips when turning steels, improving swarf handling and reducing interruptions at the machine. The chip control design supports continuous cutting and lowers the risk of surface damage from long chips. Combined with the square 90° form and a 1.2 mm corner radius, the geometry provides edge strength for heavier cuts while still enabling decent surface finish on general-purpose turning tasks. Robust design for industrial use The insert's square configuration with a negative clearance angle (0°) and tolerance class M gives a stable contact geometry in a broad range of operations. Thickness and plate dimensions maintain rigidity in the toolholder assembly, supporting consistent cutting performance during interrupted and continuous cuts. This robustness suits batch production and varied part families where indexable inserts must deliver repeatable results without frequent tool changeovers. Application guidance and material suitability Rated for the P group, the grade is intended primarily for unalloyed and alloyed steels and is optimised for the heat and chip formation characteristics typical of steel machining. The combination of WPP20G and the MP5 breaker is particularly effective for medium-duty turning where a compromise between wear resistance and toughness is required. For specific cutting data, insert seating and holder selection, consult Metav Werkzeuge's application advice to match cutting speeds and feeds to your machine and workpiece setup. For application advice, spare-part availability or to secure original Walter Tools SNMG150612-MP5 WPP20G inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will recommend the best setup for the machining task. Technical Data Article number: SNMG150612-MP5-WPP20G-WALTER Designation: SNMG150612-MP5 WPP20G Manufacturer: Walter Tools Product type: Turning insert Core specifications Plate size: 15 Thickness: 06 Corner radius: 1.2 Clearance angle: 0° (negative) Tolerance class: M Features & applications Chipbreaker: MP5 Grade: WPP20G (Tiger‑tec Gold) Material group: P (steel) Plate form: Square 90° Execution: G FAQ What materials is this insert suited for? The SNMG150612-MP5 WPP20G is designed for the ISO P material group and is suitable for unalloyed and alloyed steels. How does the MP5 chipbreaker improve production? The MP5 chipbreaker on this Walter Tools insert promotes short, controllable chips, reducing machine stoppages and improving safety during continuous turning operations. Can this insert be used for roughing and finishing? The square 90° form and 1.2 mm corner radius provide edge strength suitable for medium roughing; finishing capability depends on cutting parameters and machine stability for the SNMG150612-MP5 WPP20G. What is the benefit of the Tiger‑tec Gold grade? The Tiger‑tec Gold coating offers a balanced wear resistance and toughness, extending tool life in steel machining and enhancing process reliability with the WPP20G grade. Is this an original Walter Tools product? Yes, the SNMG150612-MP5 WPP20G is offered as a genuine Walter Tools insert; order through Metav Werkzeuge for original factory-new goods. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned only for clarification. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNMG150612-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant Tiger·tec Gold coating, stable cutting geometry and reliable chip control for reproducible turning results in serial production. Order the insert directly via Metav Werkzeuge or consult the team for application advice. SNMG150612-MP5 WPP30G indexable turning insert by Walter Tools — Tiger·tec Gold coated, MP5 chipbreaker The SNMG150612-MP5 WPP30G is a square 90° indexable turning insert designed for precision machining of steel components in production and jobbing environments. Tiger·tec Gold coated, high wear resistance Optimised for machining steel (ISO P) Square 90° form with 1.2 mm corner radius MP5 chipbreaker for controlled chips High wear resistance for demanding steel operations The Tiger·tec Gold coating paired with the WPP30G grade provides a robust, coated carbide substrate engineered for the thermal and tribological demands of steel turning. This coating strategy improves abrasive and adhesive wear resistance, which extends tool life and reduces the frequency of insert changes. For manufacturers processing unalloyed and alloyed steels under the ISO P classification, the combination of substrate and coating delivers predictable tool performance and stable cutting behaviour even during extended cycles. Geometry that stabilises cuts and improves surface quality A square 90° plate form with a 1.2 mm corner radius and a 0° (negative) relief angle ensures secure clamping and rigidity during heavy turning and finishing passes. The MP5 chipbreaker is tuned for consistent fragmentation and evacuation, which reduces the risk of chip entanglement and protects the workpiece and toolholder. These geometric choices translate into reduced vibration, improved dimensional stability and easier process set‑up for both coarse and semi‑finishing operations. Proven productivity and process security for series production Designed for industrial turning applications, this insert supports repeatable throughput and helps maintain tight tolerances across batches. The stable edge and reliable chip control contribute to consistent surface quality while lowering downtime associated with unexpected insert failures. Users of Walter Tools inserts will benefit from straightforward indexability and compatibility with standard SNMG toolholders, enabling fast interventions and minimal machine idle time. Contact Metav Werkzeuge for tailored application support and stock availability of Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNMG150612-MP5-WPP30G-WALTER Designation: SNMG150612-MP5 WPP30G Product type: Indexable turning insert Facts Inscribed circle: 15 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness code: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: MP5 Plate form: Square 90° Execution: G Material suitability: Steel (ISO P) Application: Turning / indexable insert FAQ What materials is this insert suitable for? The SNMG150612-MP5 WPP30G insert is optimised for machining steel (ISO P); the WPP30G grade and Tiger·tec Gold technology are tailored to the heat and chip characteristics typical of steel turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this insert improves chip control and evacuation, reducing the likelihood of long, stringy chips and supporting stable cutting conditions during medium to heavy turning. Is the corner radius suitable for finishing operations? The 1.2 mm corner radius provides a balance between strength and surface finish, enabling both semi‑finish and finishing passes with improved edge stability. What does the negative 0° relief angle mean in practice? A 0° (negative) relief angle increases edge support and rigidity, making the insert particularly effective for interrupted cuts and heavier machining where stability is critical. Can this insert be used in standard SNMG toolholders? Yes, the insert follows the SNMG designation and is compatible with standard SNMG toolholders designed for square 90° inserts. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
SNMG150612-NRT WSM20S WSM20S Wendeplatten - Walter Tools
Optimize turning operations with a high-performance, coated carbide grade and proven chip control: the SNMG150612-NRT WSM20S delivers stable cutting edges and consistent chip formation for stainless steel and heat-resistant alloys. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG150612-NRT WSM20S turning insert — Tiger·tec Silver, NRT chipbreaker, Walter Tools The SNMG150612-NRT WSM20S is a square 90° turning insert engineered for heavy-duty machining of stainless steel and heat-resistant superalloys, offering a balance of edge stability and thermal resistance. Tiger·tec Silver coating for heat resistance NRT chipbreaker for stable chip control 1.2 mm corner radius for robust edge strength Square 90° form with 0° negative rake Consistent chip control for difficult-to-machine materials The graded Tiger·tec Silver coating combined with a coated carbide base focuses on thermal stability and wear resistance, which supports continuous production when machining stainless steel and high-temperature alloys. The integrated NRT chipbreaker promotes predictable chip formation, reducing the risk of built-up edge and improving surface integrity. For operations that require repeatable results, the geometry keeps cutting forces steady and lowers the incidence of unexpected interruptions. Geometric design that improves edge life and process security A 1.2 mm corner radius and the square 90° plate form increase edge strength and permit secure indexation in standard toolholders, while the 0° negative rake helps control cutting engagement under heavy feeds. The insert’s toleranzklasse M indicates adaptation to stainless workpiece conditions and supports reliable tool change intervals. These features translate into longer in-service life of the insert and fewer tool interventions, supporting a smoother production flow and predictable machining costs. Practical integration for higher productivity on the shop floor As an indexable insert in the Tiger·tec Silver range, this component integrates into existing turning systems with conventional clamping and offers straightforward part replacement. The combination of coating, chipbreaker form and robust geometry enhances process security and reduces cycle-time variability when tackling tough alloys and Titan-like materials. Use of this insert contributes to fewer rejects, improved surface finish and a measurable uplift in shop throughput. For demanding stainless steel and superalloy applications, contact Metav Werkzeuge for Walter Tools Tiger·tec Silver inserts and detailed cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SNMG150612-NRT-WSM20S-WALTER Designation: SNMG150612-NRT WSM20S Product type: Turning insert Grade series: Tiger·tec Silver Dimensions & core data Insert size: 15 Shape: Square 90° Corner radius: 1.2 mm Relief angle: 0° (negative) Plate thickness: 06 Tolerance class: M Materials & features Coating: Tiger·tec Silver Chipbreaker: NRT Grade/sort: WSM20S Applicable material groups: S / M Suitable for: stainless steel (M), heat-resistant superalloys and titanium (S) FAQ What materials is this insert designed for? The SNMG150612-NRT WSM20S insert by Walter Tools is designed for stainless steel and heat-resistant superalloys, with the grade tuned for secure chip formation and thermal resistance. How does the NRT chipbreaker benefit production? The NRT chipbreaker on the SNMG150612-NRT WSM20S promotes short, manageable chips and reduces built-up edge, which enhances surface quality and reduces machine downtime. What does the 0° negative rake mean in practice? A 0° negative rake gives the insert increased edge strength under heavy cutting loads, improving stability and wear resistance during plunging or interrupted cuts. Can this insert be indexed in standard toolholders? Yes, the square 90° geometry and standard designation make the SNMG150612-NRT WSM20S compatible with common indexable turning holders that accept SNMG-style plates. Which series and coating does this grade belong to? The grade is WSM20S and part of the Tiger·tec Silver series, a coated carbide solution optimised for difficult-to-machine materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory-new product of the manufacturer.
SNMG150612-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Achieve reliable, repeatable turning in stainless steels with a coated carbide insert that combines Tiger‑tec Gold surface technology and a 1.2 mm corner radius for stable chip formation and extended edge life. The geometry and RM5 chipbreaker deliver secure chip control under medium to robust conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data and application support. SNMG150612-RM5 WMP20G – Walter Tools indexable turning insert, Tiger‑tec Gold, 1.2 mm radius The SNMG150612-RM5 WMP20G is a square 90° indexable insert engineered for medium to heavy-duty turning of stainless steels, offering a coated carbide grade optimised for secure chip formation and consistent surface finish Tiger·tec Gold coating for reliable edge life Optimised for stainless steel (ISO M) machining 1.2 mm corner radius for reproducible surfaces Negative 0° clearance for robust cutting action Consistent performance from the Tiger‑tec Gold coating The Tiger‑tec Gold coating is a multilayer, coated carbide technology designed to resist adhesive wear and support stable cutting edges when machining stainless steels. Coated carbide means the insert combines a hard substrate with protective layers that reduce friction and thermal damage; this leads to fewer edge failures and longer tool life. For production environments where downtime and tool change frequency impact throughput, the coating’s thermal and mechanical resilience translates directly into higher process reliability and lower overall cost per component. Geometry and chip control for dependable turning The square 90° form with a 1.2 mm corner radius and the RM5 chipbreaker provide two decisive benefits: mechanical strength at the cutting edge and controlled chip formation. A larger corner radius increases edge robustness for interrupted cuts and heavier passes, while the RM5 chipbreaker promotes manageable chip shapes in ductile, tough stainless grades. The insert’s negative 0° relief enhances cutting stability for plunge cuts and heavy cross‑section machining, making it suited to demanding turning operations where secure engagement and repeatable results matter. Productivity advantages and application guidance Selecting this grade reduces rework and stabilises cycle times in serial production. The coated carbide grade WMP20G is matched to ISO group M (stainless steels), where material toughness and build‑up at the cutting edge are typical challenges. Using this insert with appropriate cutting data — moderate cutting speeds, controlled feeds and adequate coolant or lubrication — will improve surface finish and extend edge life. The practical result is fewer tool changes, more consistent component quality and improved machine utilisation in batch and continuous turning operations. Practical fitment and decision support for engineers The insert is designed for standard indexable turning toolholders that accept SNMG‑form inserts with a 90° shape. Its RM5 chip control and geometry make it suitable for both roughing and semi‑finishing steps when process parameters are adapted to stainless steel behaviour. For teams specifying tooling, the combination of coating, grade and geometry provides a straightforward route to stabilise machining of austenitic and other stainless alloys. Application-specific recommendations can be provided to match holder, insert orientation and cutting data to the workpiece and machine capability. For machining stainless steels with high process stability, specify the Walter Tools SNMG150612-RM5 WMP20G (Tiger‑tec Gold) and contact Metav Werkzeuge for cutting parameters and procurement assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: SNMG150612-RM5-WMP20G-WALTER Designation: SNMG150612-RM5 WMP20G Shape: Square 90° Size: 15 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Facts Grade: WMP20G Series: Tiger‑tec Gold Tolerance class: M Chipbreaker: RM5 Material application: Stainless steel (ISO M) Special features Coating: Tiger‑tec Gold (coated carbide) Geometry: Square 90°, corner radius 1.2 mm Execution: G Series description: WMP20G for medium to robust stainless steel machining Manufacturer: Walter Tools FAQ Which materials is this insert suited to? The SNMG150612-RM5 WMP20G is formulated for stainless steels (ISO group M); the WMP20G grade and Tiger‑tec Gold coating support secure chip formation in these alloys. What does the RM5 chipbreaker do? The RM5 chipbreaker is engineered to produce short, controllable chips and to reduce the risk of entanglement, improving process stability when turning tough, ductile stainless steels. Is the insert suitable for heavy cuts or interrupted machining? Yes. The square 90° geometry combined with a 1.2 mm corner radius and negative relief provides enhanced edge strength for heavier depths of cut and interrupted conditions. Can the insert be used for finishing operations? When set with conservative cutting speeds and fine feeds, the coated grade and geometry can deliver reproducible surface quality suitable for semi‑finishing; final finishing may require a dedicated finishing grade depending on tolerance requirements. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the leading manufacturers of precision cutting tools and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com