SNMG150612-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, secure chip control from the RM5 breaker, and a robust square geometry for consistent throughput in rostfreier Stahl applications; order the SNMG150612-RM5 WMP20S directly via Metav Werkzeuge or request technical advice from our consultants. SNMG150612-RM5 WMP20S indexable turning insert, Tiger·tec Silver, for rostfreier Stahl — Walter Tools The SNMG150612-RM5 WMP20S is a square indexable insert designed for reliable machining of rostfreier Stahl under medium to robust cutting conditions. Tiger·tec Silver coated carbide grade WMP20S Designed for rostfreier Stahl (ISO M) RM5 chipbreaker for secure chip control Square 90° form with 1.2 mm corner radius Increased process reliability for difficult alloys The coated carbide WMP20S grade from the Tiger·tec Silver family delivers a balance of wear resistance and toughness that stabilises cutting performance when machining rostfreier Stahl. The combination of a resilient coating and the material’s composition supports predictable chip formation and reduces the tendency for build-up on the cutting edge. This results in longer effective tool life and fewer unplanned tool changes, contributing to a smoother production flow and lower overall machining costs. Geometry and chip control that protect the cutting edge The insert’s square 90° geometry combined with a 1.2 mm corner radius and 0° (negative) clearance provides a robust edge for shoulder cuts and interrupted surfaces. The integrated RM5 chipbreaker is tuned to produce controllable chips in tougher alloys, lowering the risk of entanglement and improving surface integrity. Explaining the function: a chipbreaker redirects and segments chips so that heat and mechanical loads are distributed, which supports a steady cutting process and reduces the likelihood of edge deterioration. Practical benefits in production and tool management As an indexable solution from Walter Tools, this insert supports productive machining strategies where consistent results are required. The coated grade assists in managing thermal influences common with rostfreier Stahl, while the negative clearance contributes to edge strength when facing higher cutting forces. For workshop planning, the insert’s attributes translate into fewer stoppages, more predictable part quality and an easier integration into established turning setups that prioritise uptime and repeatability. Contact Metav Werkzeuge for machining recommendations specific to the Tiger·tec Silver WMP20S grade or to arrange a cutting test tailored to rostfreier Stahl — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: SNMG150612-RM5-WMP20S-WALTER Article: Indexable turning insert SNMG150612-RM5 WMP20S by Walter Tools Brand: Walter Tools Facts Insert form: Square 90° Inscribed circle / size: 15 Corner radius: 1.2 mm Clearance (relief) angle: 0° (negative) Thickness code: 06 Grade family: Tiger·tec Silver Special features Grade: WMP20S Chipbreaker: RM5 Suitable for: rostfreier Stahl (ISO M) Execution: G FAQ What material group is this insert intended for? The SNMG150612-RM5 WMP20S is specified for rostfreier Stahl (ISO M) and is formulated to manage the toughness and thermal challenges typical of those alloys. How does the RM5 chipbreaker benefit production? The RM5 chipbreaker on this Tiger·tec Silver insert controls chip shape and evacuation, which improves surface quality and reduces interruptions caused by poor chip behaviour. What does the 0° (negative) clearance mean for machining? A 0° negative clearance increases edge robustness during heavy or interrupted cuts; on the SNMG150612-RM5 WMP20S this supports stable cutting in more demanding rostfreier Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150612-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Die Kombination aus einer Tiger‑tec Gold‑Beschichtung, dem WMP30G‑Schneidstoff und dem stabilen RM5‑Spanformer sorgt für sichere Spanbildung und zuverlässige Zerspanung rostfreier Stähle; bei Fragen stehen die Berater von Metav Werkzeuge zur Verfügung – Bestellung oder technische Abstimmung direkt über Metav Werkzeuge möglich. SNMG150612-RM5 WMP30G turning indexable insert for stainless steel (Tiger‑tec Gold) — Walter Tools SNMG150612-RM5 WMP30G is a square 90° turning insert designed for secure chip control and reliable edge life when machining stainless steels under moderate to robust conditions Tiger‑tec Gold coated carbide grade WMP30G Optimised for stainless steel (ISO group M) RM5 chipbreaker for secure chip formation Square 90° insert, 1.2 mm corner radius Consistent performance on stainless steel for fewer process interruptions The SNMG150612-RM5 WMP30G insert combines a Tiger‑tec Gold coating with a coated carbide substrate to address the typical challenges of machining stainless steel: high toughness, tendency to build up, and heat concentration. The WMP30G grade is formulated to support stable chip formation, which reduces the risk of edge build‑up and unexpected tool change. In practical terms, this means fewer unscheduled stops during a production shift and more predictable component quality, making the insert suitable for series production where process stability matters. Geometry and chip control that protect the cutting edge The insert’s RM5 chipbreaker and square 90° form create a robust cutting geometry that disperses cutting forces and manages swarf reliably. The 1.2 mm corner radius increases edge strength and helps maintain a consistent cutting profile over longer tool life, while the 0° (negative) free angle contributes to a strong cutting edge under interrupted cuts or heavy engagement. For users less familiar with these terms: a larger corner radius and a negative rake angle generally favour durability and are chosen where edge robustness and reproducible dimensions are priorities. Productivity advantages through repeatable results By pairing a modern coating technology with a purpose‑built chipbreaker, the grade supports higher average machining times between indexings. The Tiger‑tec Gold coating enhances wear resistance and heat management at the cutting zone, which can translate into improved surface finish and longer periods between tool changes under comparable cutting parameters. For operations aiming to increase throughput without compromising component quality, this insert delivers tangible process advantages that are measurable in reduced downtime and steadier part tolerances. Handling, applications and tips for integration The insert is supplied in the ISO designation format suitable for standard toolholders and is identified by its square format and designation series. It is specifically intended for machining materials classified in ISO group M, that is, stainless steels. During setup, choose cutting data that account for stainless steel’s lower thermal conductivity and tendency to work‑harden; moderated cutting speeds with appropriate feeds are typically recommended. As the insert features a robust RM5 chipbreaker, it is particularly effective in applications where controlled, segmented chips are required for safe removal. Discuss application-specific requirements and availability with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering assistance Technical data Article number: SNMG150612-RM5-WMP30G-WALTER Manufacturer: Walter Tools Product type: Turning indexable insert Grade: WMP30G Series: Tiger‑tec Gold Numbers / Core technical data Free angle: 0° (negative) Corner radius: 1.2 mm Insert size: 15 Thickness designation: 06 Designs / Special features Square 90° insert form RM5 chipbreaker Coated carbide (Tiger‑tec Gold technology) Optimised for stainless steel (ISO group M) Robust geometry for interrupted cuts and stable edge life FAQ What materials is this insert suitable for? The insert is optimised for stainless steel (ISO group M); the WMP30G grade and Tiger‑tec Gold coating support secure chip formation when machining such materials. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes controlled chip formation and safer swarf evacuation, which contributes to repeatable machining and protects the cutting edge during continuous production. Is the insert compatible with standard toolholders? Yes, the insert follows ISO designation standards for turning inserts (SNMG format) and is intended for conventional indexable turning toolholders designed for square 90° inserts. What are the key geometric features to note? Key features include a 1.2 mm corner radius, square 90° form and a 0° negative free angle — all chosen to improve edge strength and process reliability under moderate to robust cutting conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original and new from the manufacturer.
SNMG150612-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the RM5 chipbreaker for reliable chip control and long tool life; the insert’s design supports productive turning of rostfreier Stahl and heat‑resistant alloys. Order directly via Metav Werkzeuge or contact our consultants for application advice. SNMG150612-RM5 WSM20S — Square 90° turning insert, RM5 chipbreaker, Walter Tools The SNMG150612-RM5 WSM20S is a square 90° indexable insert optimised for turning rostfreier Stahl and hot, difficult‑to‑cut alloys in demanding production environments Tiger·tec Silver coating for extended edge life Suitable for rostfreier Stahl and superalloys RM5 chipbreaker for controlled chip formation 1.2 mm corner radius for robust cutting performance Higher process reliability with advanced coating and substrate The combination of the Tiger·tec Silver coating and a wear‑resistant cemented‑carbide substrate delivers improved edge life and consistent performance in serial production. Designed for materials classified as M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium) under ISO 513, the insert’s microstructure promotes secure chip formation and reduced tendency for built‑up edge when machining tough, temperature‑sensitive workpieces. For production planning, this translates into fewer interruptions, more predictable tool changes and a stable surface finish across batches. Geometry that promotes stability and efficient chip control The square 90° shape with a 1.2 mm corner radius and RM5 chipbreaker provides a balance between edge strength and cutting versatility. A negative 0° rake (0° negative) increases cutting‑edge robustness for interrupted cuts and heavy depths of cut, while the chipbreaker geometry channels chips away from the cutting zone to reduce heat load and tool stress. These design choices lead to lower scrap rates and steadier cycle times, making the insert suitable for shoulders, medium‑deep longitudinal turning and demanding finishing operations where edge security matters. Practical integration and predictable tool management The insert is compatible with standard indexable turning systems that accept SNMG‑style geometry and can be used across a range of holders to suit roughing and finishing operations. Classification under the WSM20S grade within the Tiger·tec Silver series simplifies grade selection for mixed‑material production: one grade supports both rostfreier Stahl and high‑temperature alloys, reducing inventory complexity. For machining strategy, expect consistent tool behaviour and an easier path to process standardisation; consult technical data sheets or our application engineers to match feeds, speeds and coolant strategy to specific alloys. For tailored application support and to source the SNMG150612-RM5 WSM20S insert from Walter Tools, contact Metav Werkzeuge for expert recommendations and availability. Technical Data Article number: SNMG150612-RM5-WSM20S-WALTER Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade: WSM20S Series: Tiger·tec Silver Facts Corner radius: 1.2 mm Insert size: 15 mm Thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RM5 Shape: Quadrate 90° Coating: Tiger·tec Silver Material suitability: S / M Application: rostfreier Stahl; heat‑resistant superalloys and titanium FAQ What materials is this insert best for? The SNMG150612-RM5 WSM20S grade is engineered for rostfreier Stahl and heat‑resistant superalloys/titanium (ISO groups M and S), providing secure chip formation and edge stability. How does the RM5 chipbreaker help in production? The RM5 chipbreaker on this Walter Tools insert directs chips reliably away from the cut and reduces heat concentration, improving process stability and surface quality. Is the insert suitable for interrupted cuts and roughing? Yes, the square 90° geometry combined with a 1.2 mm corner radius and negative 0° rake delivers robust performance for interrupted cuts and moderate roughing operations. Can one grade be used across different steels and superalloys? The WSM20S grade within the Tiger·tec Silver series is intended to cover both rostfreier Stahl and certain high‑temperature alloys, helping to simplify tooling assortments. How to select the correct holder and clamping for this insert? Use a turning holder compatible with SNMG inserts and follow the holder manufacturer’s clamping specifications; correct clamping ensures repeatable seat location and optimal cutting conditions. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150612-RM5 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating combined with the RM5 chipbreaker and a negative 0° clearance for reliable machining of stainless steels and heat‑resistant alloys; order the insert via Metav Werkzeuge or contact our consultants for application support. SNMG150612-RM5 WSM30S indexable turning insert with Tiger·tec Silver coating for stainless steels — Walter Tools The SNMG150612-RM5 WSM30S is a square 90° indexable insert designed for turning operations on stainless steels and heat‑resistant superalloys, offering stable cutting edge performance and optimised chip control. Tiger·tec Silver coated carbide grade WSM30S RM5 chipbreaker for stable chip control Square 90° insert with 1.2 mm corner radius Suited for stainless steels and superalloys Increase process reliability with a heat‑resistant cutting grade The coated WSM30S grade, part of the Tiger·tec Silver series, is engineered for demanding turning tasks on materials that generate high temperatures and tend to work harden. The coating improves thermal resistance and reduces adhesion to the cutting edge, which directly translates into longer tool life and fewer unscheduled tool changes. For production environments where consistent results are essential, this cutting grade helps maintain dimensional stability and surface finish over extended cycles. Better chip control and consistent edge stability for productivity gains Equipped with the RM5 chipbreaker and a 1.2 mm corner radius, the insert promotes controlled chip formation and safe evacuation, reducing the risk of built‑up edge on difficult materials. The 0° negative clearance supports a robust cutting geometry that resists edge chipping under interrupted cuts or heavy depths of cut. Together, these features enable higher feeds and more reliable cutting conditions, which can increase throughput without sacrificing component quality. Geometry and handling that simplify process planning The square 90° shape and 15 mm seat size provide flexible indexing for multiple corners, improving usable life per insert. The insert thickness and standardised designation support straightforward integration into common toolholders, reducing set‑up complexity. For operators less familiar with specialty grades, the designation and geometry make selection and replacement uncomplicated, while the chipbreaker reduces demands on downstream chip management systems. Application guidance and material compatibility This insert is formulated primarily for machining stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where secure chip formation and thermal stability are required. The coated carbide composition supports operations where adhesion and high cutting temperatures are limiting factors. For mixed production runs, the WSM30S grade offers a balanced performance that helps ensure consistent surface integrity and repeatable tolerances on demanding alloys. For machining stainless steels and heat‑resistant alloys with enhanced process stability, request an application recommendation from Metav Werkzeuge or procure the Walter Tools SNMG150612‑RM5 WSM30S insert through Metav Werkzeuge’s sales team. Technical data Article number: SNMG150612-RM5-WSM30S-WALTER Designation: SNMG150612-RM5 WSM30S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Plate size: 15 mm Corner radius: 1.2 mm Thickness: 06 Clearance angle: 0° (negative) Plate form: Square 90° Tolerance class: M Special features Grade: WSM30S (coated carbide) Coating: Tiger·tec Silver Chipbreaker: RM5 Execution: G Material compatibility: S / M Suitable for: stainless steels and heat‑resistant superalloys FAQ What materials is this insert suited for? The SNMG150612‑RM5 WSM30S insert is suitable for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where thermal stability and secure chip formation are critical. How does the RM5 chipbreaker benefit turning operations? The RM5 chipbreaker promotes controlled chip formation and reliable evacuation; this reduces built‑up edge and helps maintain consistent cutting forces when using the SNMG150612‑RM5 WSM30S insert. Can the insert be indexed multiple times? Yes, the square 90° geometry provides multiple usable corners, allowing extended service life from a single SNMG150612‑RM5 WSM30S insert before replacement is required. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal resistance and reduces adhesion to the cutting edge, supporting longer tool life and improved surface finish when machining demanding alloys with the SNMG150612‑RM5 WSM30S. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is part of the global tooling industry and is presented here for informational purposes. Protected trademarks and trade names remain the property of their respective owners. The mentioned article is an original, factory‑new product from the manufacturer.
SNMG150612-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, stable chip control and a compact square geometry for reliable steel turning operations — order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. SNMG150612-RP5 WPP05G turning insert — square 90° insert for steel machining by Walter Tools The SNMG150612-RP5 WPP05G is a square 90° indexable turning insert designed for robust steel machining; its Tiger·tec Gold coating and RP5 chipbreaker make it suitable for a wide range of roughing and finishing tasks. Tiger·tec Gold coating for high wear resistance Square 90° shape with 1.2 mm corner radius 0° negative rake for robust cutting Optimised RP5 chipbreaker for steel turning Longer tool life and consistent performance in steel machining The combination of a Tiger·tec Gold coating and the WPP05G carbide grade delivers improved wear resistance and stable edge behaviour when machining steel. The advanced coating system reduces flank and crater wear, which translates into fewer tool changes and more predictable production cycles. For machining operations where consistent tool life and repeatable part quality are priorities, this insert gives a clear operational advantage by keeping cutting forces and temperature effects under control while maintaining dimensional stability. Predictable chip control and edge geometry for reliable surfaces The insert’s RP5 chipbreaker and 0° negative rake geometry are configured to manage chip formation during typical steel cutting conditions, promoting short, controllable chips and reducing the risk of built-up edge. The 1.2 mm corner radius and the square 90° form contribute to edge robustness, enabling both stable roughing and fine finishing passes with fewer vibrations. These geometric choices help to preserve surface integrity on the workpiece while maintaining process safety in high-volume turning. Compact SNMG format for flexible toolholder use Presented in the standard SNMG format with a nominal size of 15 mm and a plate thickness of 6 mm, the insert is compatible with many common turning tool systems that accept SNMG-style inserts. The tolerance class M supports reproducible seating and clamping accuracy, which is essential for tight-tolerance production. The square form offers four indexable corners, increasing the number of usable edges per insert and supporting cost-efficient tool management in the production environment. Operational efficiency and application scope Classified for the ISO material group P (steel), this insert is engineered for a broad coverage of steel types — from general-purpose steels to tougher, more heat-generating alloys. The result is a tool solution that supports productive machining with stable chip formation and dependable edge life. Where process reliability and consistent surface quality are required, the insert reduces downtime and supports predictable throughput, aiding both small-batch and series production workflows. Contact Metav Werkzeuge for tailored application advice and availability of the Tiger·tec Gold SNMG150612‑RP5 WPP05G insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: SNMG150612-RP5-WPP05G-WALTER Label: Drehwendeschneidplatte SNMG150612-RP5 WPP05G Walter Tools Manufacturer: Walter Tools Facts Size: 15 mm Thickness: 6 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features Series: Tiger·tec Gold Grade/sort: WPP05G Chipbreaker: RP5 ISO designation: SNMG150612-RP5 WPP05G Material application: Steel (P) Execution: G FAQ What steels is this insert suitable for? The SNMG150612‑RP5 WPP05G insert is specified for ISO group P (steel) and covers a wide range of unalloyed and alloyed steels according to its WPP05G grade and Tiger·tec Gold coating. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the SNMG150612‑RP5 promotes short, consistent chips when turning steel, improving process security and surface finish while reducing the likelihood of chip interference. Can the insert be used for both roughing and finishing? Yes. The square 90° geometry combined with a 1.2 mm corner radius and robust grade makes the insert versatile for both roughing passes and lighter finishing cuts in steel applications. How many usable edges are available per insert? As a square SNMG insert, the SNMG150612‑RP5 offers four indexable cutting edges, which supports economic use through multiple indexings before replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification and explanatory purposes; there is no commercial affiliation implied. The offered item is an original, factory‑new product of Walter Tools.
SNMG150612-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, predictable chip control and robust edge stability for efficient steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SNMG150612-RP5 WPP10G Drehwendeschneidplatte – Tiger·tec Gold, for steel machining (Walter Tools) SNMG150612-RP5 WPP10G is a square, negative‑rake turning insert designed for productive steel machining, offering a balance of wear resistance and reliable chip formation. Tiger·tec Gold coating for long tool life Optimised RP5 chipbreaker for steel machining Square SNMG 15 with 1.2 mm corner radius 0° negative rake for stable cutting Consistent performance and longer tool life The combination of the Tiger·tec Gold series and the WPP10G grade delivers a coated carbide solution that is optimised for prolonged service life in demanding steel applications. The multilayer coating reduces flank wear and improves thermal stability, which means fewer indexings and longer periods between tool changes. For production environments that prioritise uptime, this results in a measurable improvement in machining consistency and reduced tool‑related downtime. The insert’s construction supports predictable wear resistance under the heat and pressures typical of steel turning, enabling steady processes and repeatable results. Reliable chip control and stable cutting geometry The engineered RP5 chipbreaker provides controlled chip formation across a wide range of cutting depths, preventing long, stringy chips and promoting safe evacuation. Combined with the 0° negative rake, the insert offers increased edge strength for heavier cuts and interrupted turning. The SNMG square geometry with a 1.2 mm corner radius yields a robust cutting edge that tolerates process variations and supports a consistent surface finish. In practice, this means fewer batch rejects and more predictable part tolerances when machining unalloyed or alloyed steels. Ready integration and application guidance for steel turning Designed as a standard SNMG insert with designated size 15 mm and plate thickness 06, the component fits conventional holders specified for SNMG inserts and is supplied to tolerance class M. The grade is listed for the steel material group under ISO 513 (designation P), making it suitable for unalloyed and alloyed steel grades with a range from wear‑resistant to tougher workpiece characteristics. For selection, match the insert geometry and corner radius to part tolerance and surface requirements; choose more conservative parameters for small diameters or thin walls. If process optimisation is required, refer to toolholder compatibility and cutting parameter charts to achieve stable cutting and best tool life. For application support or to secure availability of this Walter Tools Tiger·tec Gold SNMG150612‑RP5 WPP10G insert, contact Metav Werkzeuge for consultation and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: SNMG150612-RP5-WPP10G-WALTER Designation: SNMG150612-RP5 WPP10G Product type: Drehwendeschneidplatte Series: Tiger·tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Insert size: 15 mm Corner radius: 1.2 mm Thickness: 06 Rake angle: 0° (negative) Shape: Square 90° Tolerance class: M Special features RP5 chipbreaker Coated carbide grade (WPP10G) Suited for steel (ISO 513, group P) Robust edge for interrupted cuts Execution: G FAQ Is this insert suitable for alloyed steels? Yes. The SNMG150612-RP5 WPP10G insert from Walter Tools is specified for the steel material group (ISO 513, P) and is suitable for both unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade improves thermal stability and wear resistance, which extends the insert life and enhances process reliability during steel turning. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker delivers controlled chip formation for predictable evacuation and reduced risk of chip entanglement, contributing to consistent surface finish and safer operation. Which corner radius and geometry should be selected for roughing? The square SNMG geometry with a 1.2 mm corner radius is robust for finishing to medium roughing; for heavy roughing consider matching to a stronger toolholder and appropriate feed rates to keep edge load within recommended limits. Does the insert require a special toolholder? No special holder is required beyond a standard SNMG-compatible toolholder sized for a 15 mm insert; ensure correct clamping and alignment for optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150612-RP5 WPP20G RP5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust RP5 chipbreaker and a 0° negative rake for dependable steel turning and predictable tool life. Order the insert via Metav Werkzeuge or consult the technical team for machining parameters and optimisation. SNMG150612-RP5 WPP20G indexable turning insert — Tiger·tec Gold, for steel, Walter Tools SNMG150612-RP5 WPP20G is a square 90° indexable turning insert designed for general steel machining under ISO P conditions, offering high process security and consistent chip formation Tiger·tec Gold coated carbide WPP20G Square 90° geometry with 1.2 mm radius RP5 chipbreaker for controlled chips 0° negative rake for cutting stability Stable cutting and predictable chip control for steel turning The Tiger·tec Gold coating in this grade WPP20G combines a wear-resistant coating with a tough carbide substrate to balance tool life and edge strength. The integrated RP5 chipbreaker is engineered to produce short, manageable chips when turning unalloyed and alloyed steel, improving process reliability and reducing cycle interruptions. In practice, this means fewer tool changes and more consistent part quality under the thermal and mechanical demands typical of ISO P machining. Strong cutting edge and reduced downtime through geometry A square 90° geometry with a 1.2 mm corner radius and 0° negative rake delivers improved edge stability and mechanical integrity at the cutting edge. The moderate corner radius increases resistance to chipping in interrupted cuts, while the negative rake angle enhances clamping and cutting security on heavy feeds. The coated carbide substrate supports higher average productivity by enabling longer cutting intervals, which is particularly beneficial in batch production and continuous turning operations. Application guidance and easy integration into machining processes The insert is intended for standard to robust steel applications (ISO group P) and suits turning operations where stable chip formation and repeatable performance are priorities. The RP5 chipbreaker simplifies chip evacuation and reduces the risk of built-up edge; where finish requirements are critical, adjust feed and speed to balance surface quality and tool life. For machine compatibility, the insert follows the SNMG form factor and thickness code and can be integrated into standard square insert toolholders for reliable clamping and repeatable positioning. For line-side advice on choosing the right Tiger·tec Gold insert for specific steel grades and machines, contact Metav Werkzeuge for machining recommendations and ISO P parameter charts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMG150612-RP5-WPP20G-WALTER SKU: SNMG150612-RP5-WPP20G-WALTER Designation: SNMG150612-RP5 WPP20G Core dimensions Inscribed circle / size: 15 mm Corner radius: 1.2 mm Thickness code: 06 Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP5 Geometry: Square 90° Application: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The SNMG150612-RP5 WPP20G insert is specified for steel machining (ISO P); the Tiger·tec Gold grade is tuned to the heat and chip characteristics of unalloyed and alloyed steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert shapes chips into short, controllable segments, improving evacuation and reducing entanglement during turning operations. What benefits does the 0° negative rake provide? A 0° negative rake increases cutting edge strength and enhances clamping stability, which is useful for heavier cuts and interrupted turning where edge security is essential. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (branded Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the listed brands beyond the sale of genuine, factory-new products of the manufacturer.
SNMG150612-RP5 WPP30G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP30G grade provides a robust, wear-resistant cutting edge for reliable steel machining; the RP5 chipbreaker ensures controlled chips and stable production. Order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. SNMG150612-RP5 WPP30G – Indexable turning insert with Tiger·tec Gold coating (Walter Tools) The SNMG150612-RP5 WPP30G is a square 90° indexable turning insert with RP5 chipbreaker, designed for efficient machining of steel in ISO group P applications. Tiger·tec Gold coated carbide grade WPP30G Engineered chip control with RP5 chipbreaker Square 90° form with 1.2 mm corner radius Optimised for steel machining (ISO group P) Productive performance for steel turning The combination of Tiger·tec Gold coating and a coated carbide substrate delivers high thermal stability and enhanced wear resistance during continuous steel cutting. The WPP30G grade is formulated for the thermal and mechanical demands of steel machining (ISO group P), which results in longer tool life and fewer insert changes in high-volume production. The RP5 chipbreaker stabilises chip formation, reducing the risk of built-up edge and improving consistency in surface finish. This leads to measurable improvements in process reliability and reduced cycle-time losses. Robust geometry for demanding operations A square 90° shape with a 1.2 mm corner radius provides a strong cutting edge suitable for both light finishing and more aggressive operations where edge strength matters. The 0° negative rake contributes to a robust cutting geometry that resists chipping under interrupted cuts and heavy radial engagement. As a result, the insert offers predictable behaviour in mixed production environments and supports stable machining parameters, which simplifies process planning and increases throughput. Practical selection and handling benefits The RP5 chipbreaker is tuned for controlled chip evacuation when machining steels, improving operator safety and reducing secondary chip handling. The insert thickness and tolerance class M support repeatable clamping and stable edge runout, which is important for maintaining consistent component quality. When replacing or indexing inserts, the consistent geometry of the series aids quick tool changeover and keeps machine downtimes to a minimum. For specific application data and optimisation of cutting parameters, technical consultation is recommended to align insert selection with material grade and machining strategy. For reliable, high‑productivity steel turning using Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for personalised application advice and supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMG150612-RP5-WPP30G-WALTER Designation: SNMG150612-RP5 WPP30G Facts Geometry: Square 90° Corner radius: 1.2 mm Rake angle: 0° (negative) Thickness: 06 Size: 15 Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RP5 Grade: WPP30G (for steel, ISO group P) Series: Tiger-tec Gold Tolerance class: M FAQ What materials is this insert intended for? The SNMG150612-RP5 WPP30G is specified for machining steels (ISO group P) and the WPP30G grade is optimised to handle the heat and chip characteristics typical of these materials. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this indexable turning insert promotes consistent chip formation and evacuation during steel turning, helping to maintain surface quality and reduce secondary chip handling. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake and square 90° geometry provide a robust cutting edge that improves resistance to chipping during interrupted or heavy cuts. What does the 1.2 mm corner radius mean for surface finish? A 1.2 mm corner radius balances edge strength and finish capability; it offers improved edge life in tougher operations while still permitting acceptable surface finishes for general turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150612-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the RP7 chipbreaker with a 1.2 mm nose radius for reliable, productive turning of Stahl components; this insert is designed for long tool life and consistent chip control. Order the SNMG150612-RP7 directly via Metav Werkzeuge or ask our consultants if needed. SNMG150612-RP7 WPP10G indexable insert – Tiger‑tec Gold coating, for Stahl (Walter Tools) The SNMG150612-RP7 WPP10G is a square 90° turning insert optimised for general Stahl machining, offering a robust cutting edge and consistent performance in shop‑floor turning applications. Tiger‑tec Gold coated grade WPP10G RP7 chipbreaker for reliable chip control Square 90° geometry with 1.2 mm radius Suitable for Stahl turning, robust edge life High productivity for Stahl turning with a coated grade The combination of the Tiger‑tec Gold coating and the WPP10G grade provides a balanced performance that targets high process reliability and extended service life. Designed specifically for operations in Stahl, the coated hardmetal grade mitigates the typical heat and chip formation encountered during turning. The square 90° geometry and 1.2 mm corner radius contribute to robust cutting behaviour, enabling stable depths of cut and predictable tool wear. This results in fewer tool changes and a more continuous production flow, which supports lean machining strategies on the shop floor. Consistent chip control and surface quality from an RP7 chipbreaker The integrated RP7 chipbreaker is engineered to break and evacuate chips reliably under typical Stahl cutting conditions. Consistent chip formation reduces downtime caused by chip jamming and protects the workpiece surface, producing repeatable finishes across batches. Because the chipbreaker is matched to the Tiger‑tec Gold coating and the insert geometry, the cutting edge maintains integrity for longer, helping to achieve a steady surface roughness and reduced need for secondary finishing. The result is improved component throughput with lower rework rates. Durable edge and process security through grade and geometry A negative relief of 0° (negative) and the insert’s sturdy square shape support secure clamping and resistance to mechanical shock in interrupted cuts. The WPP10G grade, a coated carbide formulation, is aimed at a broad coverage of Stahl types and offers a compromise between wear resistance and toughness. This makes the indexable insert suitable for a range of turning operations from medium finishing to roughing, depending on the chosen cutting data. The predictable behaviour of the insert aids in reducing process variability and contributes to consistent production results. Practical application guidance and handling For optimal results, pair the insert with a suitably rigid toolholder designed for 90° square inserts and select cutting parameters aligned with the chosen Stahl grade and machine capability. The insert’s RP7 chipbreaker performs best when feeds and depths of cut promote short to medium chip lengths; this prevents long stringy chips and supports safe chip evacuation. As the grade is tuned for the thermal and mechanical conditions of Stahl machining, operators can expect fewer thermal cracks on the cutting edge and a longer usable edge life compared with uncoated grades. For application advice on the SNMG150612-RP7 WPP10G from Walter Tools or to check availability via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SNMG150612-RP7-WPP10G-WALTER Designation: SNMG150612-RP7 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Shape: Square 90° Insert size: 15 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: RP7 Grade: WPP10G Tolerance class: M Special features Coating technology: Tiger‑tec Gold Material application: Stahl Execution/variant: G Insert type: Indexable insert for turning FAQ What materials is this insert suitable for? The SNMG150612-RP7 WPP10G is designed primarily for machining Stahl; the WPP10G grade and Tiger‑tec Gold coating address the heat and chip characteristics typical of Stahl turning. What does the RP7 chipbreaker provide? The RP7 chipbreaker delivers controlled chip formation and reliable evacuation, improving process security and surface consistency when turning Stahl. What is the corner radius and why does it matter? The insert has a 1.2 mm corner radius, which supports a robust cutting edge and balanced strength for medium finishing and roughing cuts. Is the insert coated and what advantage does that bring? Yes, the insert uses the Tiger‑tec Gold coating; this enhances wear resistance and heat management, extending edge life during continuous Stahl machining. Which geometry suits the insert’s intended use? The square 90° geometry provides a stable cutting platform and is suitable for a range of turning applications where a strong edge and predictable behaviour are required. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SNMG150612-RP7 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a purpose‑built RP7 chipbreaker and a square 90° geometry for consistent metalcutting performance; order directly via Metav Werkzeuge or consult the sales engineers for application support. SNMG150612-RP7 WPP20G indexable turning insert – Walter Tools, Tiger·tec Gold, RP7 chipbreaker The SNMG150612-RP7 WPP20G is an indexable turning insert engineered for steel machining (ISO P), offering a coated carbide grade from the Tiger·tec Gold family suited to universal turning tasks. Tiger·tec Gold coated carbide RP7 chipbreaker for steel Square 90° insert form 1.2 mm corner radius for robust edges Higher productivity through a coating engineered for steel The combination of the WPP20G grade and the Tiger·tec Gold coating provides a technologically optimised surface treatment that reduces flank wear and supports stable cutting forces when machining steel (P). The coated carbide composition balances hardness and toughness to maintain a reliable cutting edge life under typical turning stresses. The built‑in RP7 chipbreaker controls chip formation, which helps to avoid entanglement and reduces the need for manual chip handling, improving cycle times in continuous production environments. These features translate directly into reduced process interruptions and more predictable tool change intervals. Consistent edge security and dimensional repeatability The insert’s square 90° form combined with a 1.2 mm corner radius and 0° negative rake geometry delivers a sturdy edge that tolerates moderate interruptions and axial loads. The M tolerance class ensures repeatable seating and stable clamping in standard SNMG pockets, which supports consistent part quality from batch to batch. Where surface finish and reliable tolerancing are required, the geometry and grade provide a compromise between wear resistance and toughness, reducing the risk of edge chipping while maintaining acceptable surface integrity on components made of unalloyed and alloyed steels. Practical integration for turning operations and grade selection The designation SNMG150612‑RP7 indicates the insert family and key dimensions for straightforward tool selection in workshop and production toolrooms; the size is given as 15 with thickness code 06, and the chip control is specified by RP7. The WPP20G grade is described as a universal steel grade, positioned between wear‑resistant and tougher grades to suit many general turning applications. Specifying the insert by its ISO reference and grade simplifies procurement and ensures compatibility with existing toolholders designed for SNMG inserts, while the coated carbide base aids performance at elevated cutting speeds where heat resistance is beneficial. For procurement or application advice on the Walter Tools SNMG150612-RP7 WPP20G insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendation and supply options Technical data SKU: SNMG150612-RP7-WPP20G-WALTER Designation: SNMG150612-RP7 WPP20G Product: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Numbers / Core technical data Insert size: 15 Corner radius: 1.2 mm Rake angle: 0° (negative) Plate form: square 90° Thickness code: 06 Tolerance class: M Chipbreaker: RP7 Special features / Versions Grade: WPP20G Series: Tiger·tec Gold Application group: P (steel) Coating: Tiger·tec Gold coated carbide Geometry: negative rake, square insert Base designation: SNMG150612-RP7 FAQ Which materials is this insert suitable for? The SNMG150612-RP7 WPP20G is formulated for ISO group P (steel) machining and is optimised for unalloyed and alloyed steels. What are the main advantages of the Tiger·tec Gold coating on this grade? Tiger·tec Gold on the WPP20G grade increases wear resistance and thermal stability, improving edge life and enabling more consistent performance in steel turning operations. How does the RP7 chipbreaker affect cutting results? The RP7 chipbreaker offers controlled chip formation for steel‑cutting tasks, promoting safer chip evacuation and reducing interruptions due to poor chip control. What insert geometry and dimensions should be expected from this SNMG code? The SNMG150612‑RP7 designation indicates a square 90° insert with size 15, corner radius 1.2 mm and thickness code 06; the geometry is negative with a 0° rake. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names mentioned above are the property of their respective owners and are used here for explanation only. There is no affiliation or partnership implied between Metav Werkzeuge and the mentioned brands. The offered article is an original factory‑new product of the manufacturer.
SNMG150612-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WPP30G cutting grade and the RP7 chipbreaker for consistent chip control and extended edge life; order directly via Metav Werkzeuge or consult our specialists for application advice. SNMG150612-RP7 WPP30G Drehwendeschneidplatte by Walter Tools — square 90° insert with RP7 chipbreaker SNMG150612-RP7 WPP30G is a square turning insert designed for stable, productive steel turning in general machining applications Tiger‑tec Gold coating for extended tool life WPP30G grade optimised for steel machining RP7 chipbreaker for consistent chip control Square 90° geometry with 1.2 mm corner radius Consistent performance for steel turning with fewer interruptions The combination of the Tiger‑tec Gold coating and the WPP30G cutting grade delivers a balance of wear resistance and toughness tailored for steel machining. The coating reduces flank wear at elevated temperatures while the grade resists chipping under interrupted cuts. For production environments this means longer tool life and fewer tool changes, which improves uptime and lowers process costs. The RP7 chipbreaker contributes to stable chip control, reducing the risk of entanglement and simplifying chip evacuation in medium to heavy cuts. Geometry and design that support repeatable quality The insert’s square 90° form and 1.2 mm corner radius create a robust cutting edge that is forgiving in tougher feeds and depths of cut. The 0° negative rake (negative geometry) increases cutting edge strength, making the insert suitable for operations where edge robustness is critical. These design choices produce consistent surface finish and repeatable dimensional results across batch runs, supporting process reliability in steel turning operations. Practical advantages in daily workshop use The RP7 chipbreaker is engineered for dependable chip shaping when machining steels; it promotes short, curlable chips at typical cutting parameters, helping to prevent tool and workpiece damage. The insert thickness and square format support straightforward indexing — when one edge wears, the insert can be rotated to a fresh cutting edge quickly, reducing machine downtime. In short, the engineering behind this insert focuses on productivity and ease of use in industrial turning. Material compatibility and application notes This insert is intended primarily for the machining of steel according to ISO material group P. The WPP30G grade is described as a coated carbide tailored to steel applications, providing a compromise between wear resistance and toughness: suitable for a wide range of unalloyed and alloyed steels. For customers unfamiliar with technical grades: a coated carbide is a hard substrate with a thin protective layer that reduces friction and heat at the cutting zone, which in turn extends service life and improves process stability. Contact Metav Werkzeuge for tailored grade recommendations and cutting data for Walter Tools Tiger‑tec Gold inserts; our application specialists can advise on feeds, speeds and tooling combinations to match specific steel grades and production targets Technical data Article number: SNMG150612-RP7-WPP30G-WALTER Item designation: SNMG150612-RP7 Full designation: SNMG150612-RP7 WPP30G Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Insert form: Square 90° Insert size: 15 Corner radius: 1.2 mm Thickness: 06 Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP30G Chipbreaker: RP7 Grade family: coated carbide Application group: steel (ISO P) Execution: G FAQ What material is this insert optimised for? This SNMG150612-RP7 WPP30G insert by Walter Tools is optimised for steel machining (ISO group P) and its grade and coating are selected to balance wear resistance and toughness for that material class. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on this turning insert promotes controlled, short chips during steel turning, improving chip evacuation and reducing the likelihood of chip-related interruptions in the machining process. What is the advantage of the Tiger‑tec Gold series? Tiger‑tec Gold coating provides improved heat resistance and wear performance; in combination with the WPP30G grade it enhances edge life and process stability when turning steels. Is the insert suitable for interrupted cuts? Yes — the 0° negative rake and square 90° geometry give a robust cutting edge that tolerates interrupted cuts better than more fragile geometries. How many edges are available per insert? The square format provides multiple indexable cutting edges; the insert designation SNMG indicates a four‑edged square geometry allowing rotation to a fresh edge when required. The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of a global group. Protected trademarks and product names are the property of their respective owners. The mentioned brand names are used only for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer: Walter Tools; Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
SNMG150616-MK5 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of a wear‑resistant Tiger‑tec Silver coating and the MK5 chipbreaker for reliable chip control and extended tool life when machining cast iron; order directly via Metav Werkzeuge or consult our application specialists for tailored advice and stock availability. SNMG150616-MK5 WKK10S turning insert for cast iron – Tiger‑tec Silver, MK5 | Walter Tools A SNMG150616-MK5 WKK10S turning insert engineered to deliver consistent performance in the machining of cast‑iron components. Tiger‑tec Silver coating for wear resistance Optimised for cast iron machining MK5 chipbreaker for controlled chips Square 90° insert, 1.6 mm corner radius High productivity through enhanced wear resistance The Tiger‑tec Silver coating provides a robust surface that resists abrasive wear commonly encountered when machining cast iron. This results in longer tool life and fewer changeovers, supporting continuous production runs. The coating technology combines a hard, thermally stable top layer with an engineered substrate to maintain cutting performance at elevated temperatures; in practical terms, this means more consistent component tolerances over longer periods and a reduced tooling cost per part. The paragraph focuses on delivering measurable efficiency gains rather than vague promises. Reliable chip control and stable cutting Equipped with the MK5 chipbreaker, the insert promotes predictable chip control, producing short, manageable chips that are suited to the brittle, breaking‑type chips of grey and nodular cast irons. The chipbreaker geometry is designed to guide chip flow and reduce the risk of entanglement, which enhances process security and reduces downtime. Explained simply, chip control improves surface quality and machine safety while enabling higher feed rates where appropriate. Dimensional stability and edge endurance The square 90° insert geometry combined with a 1.6 mm corner radius offers a balance between strength and finishing capability. A negative 0° relief angle contributes to edge stability under interrupted cuts and heavy sections, making the grade well suited to robust roughing and reliable finishing of cast‑iron parts. These attributes translate into repeatable part quality and less frequent tool dressing, supporting tight production schedules and predictable throughput. Application scope and material suitability Designed for the ISO group K (cast iron), the WKK10S grade is optimised for the abrasive wear and short‑breaking chip behaviour typical of these materials. The insert suits a range of cast‑iron turning tasks where process reliability and wear resistance are priorities. For workshops seeking a tool that balances durability with versatility in cast‑iron applications, this insert provides a technically sound choice that aligns with industrial machining demands. Contact Metav Werkzeuge for specific application recommendations on Walter Tools Tiger‑tec Silver inserts and to confirm availability for cast‑iron production needs. Technical data Article number: SNMG150616-MK5-WKK10S-WALTER Description: SNMG150616-MK5 WKK10S turning insert Product type: Turning insert (indexable) Manufacturer: Walter Tools Facts Size: 15 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Plate thickness: 06 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKK10S Chipbreaker: MK5 Shape: Square 90° Material suitability: Cast iron (ISO group K) Series: Tiger‑tec Silver FAQ What materials is this insert intended for? The SNMG150616-MK5 WKK10S insert is intended for cast iron machining and is formulated to handle the abrasive wear and short‑breaking chips typical of ISO group K materials. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating increases wear resistance and thermal stability, extending tool life and enabling more consistent cutting performance in demanding cast‑iron operations. What role does the MK5 chipbreaker play? The MK5 chipbreaker promotes controlled, short chips that are easier to manage during turning of cast iron, improving surface quality and reducing the risk of chip‑related interruptions. Is the geometry suitable for heavy roughing? The square 90° form and 1.6 mm corner radius, together with a negative relief angle, provide a robust cutting edge that is suitable for heavy‑duty engagement and interrupted cuts on cast‑iron components. Can this insert be used for finishing as well as roughing? Yes; the combination of edge stability and wear resistance allows the insert to perform in both roughing and finishing tasks where the chosen feeds and speeds are appropriate for the material and machine setup. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer Walter Tools.
SNMG150616-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of robust performance and stable chip control for reliable cast iron turning; the combination of Tiger‑tec Silver coating and the WKK20S grade ensures long tool life and consistent surface quality. Order directly via Metav Werkzeuge or contact their consultants for application advice. SNMG150616-MK5 WKK20S — indexable turning insert for cast iron, Tiger‑tec Silver, Walter Tools A SNMG150616-MK5 WKK20S indexable turning insert designed for efficient machining of cast iron with a MK5 chipbreaker and a negative 0° rake for secure cutting action High wear resistance from Tiger‑tec Silver coating MK5 chipbreaker for controlled chip formation Square 90° geometry for versatile grooving and shoulder work Suitable for cast iron machining according to ISO classification Increase throughput with a coating engineered for abrasive materials The combination of the Tiger‑tec Silver coating and the WKK20S grade delivers enhanced resistance to abrasive wear, which directly translates into longer tool life and fewer tool changes during production. For operations on cast iron, this coated carbide formulation is adapted to the frequently short, brittle chip form typical of such alloys, enabling stable chip control and reduced downtime. The result is measurable productivity gains and lower process costs per part. Secure cutting action and predictable edge performance The MK5 chipbreaker and negative 0° rake produce a controlled cutting geometry that minimises vibration and promotes consistent cutting forces. With a square 90° shape and a corner radius of 1.6, the insert is well suited to finishing and semi‑finishing shoulders and faces where dimensional accuracy and repeatability are required. These design choices favour process reliability and make setup and parameter selection more straightforward for CNC turning operations. Practical benefits for the workshop and production planners Specifying this insert supports a rational machining strategy: fewer tool offsets, predictable tool life, and consistent surface finish for cast iron components. The insert’s tolerance class M and the Walter Tools series pedigree ensure compatibility with standard toolholders and ease of inventory management. For production planners, this translates into predictable maintenance cycles and improved overall equipment effectiveness (OEE), backed by the proven technology of Tiger‑tec Silver. Contact Metav Werkzeuge to discuss application specifics, request cutting data for cast iron or reserve SNMG150616-MK5 WKK20S inserts for your next production run; Metav Werkzeuge will assist with tailoring parameters to the workpiece and machine. Technical data Article number: SNMG150616-MK5-WKK20S-WALTER Label: Drehwendeschneidplatte SNMG150616-MK5 WKK20S Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Manufacturer: Walter Tools Facts Plate size: 15 Corner radius: 1,6 Thickness designation: 06 Free angle: 0° (negativ) Plate form: Quadrat 90° Tolerance class: M Special features Chipbreaker: MK5 Coated carbide grade Optimised for cast iron (ISO group K) Execution: G Stable chip formation and consistent edge control FAQ What materials is this insert intended for? The SNMG150616-MK5 WKK20S insert is optimised for cast iron (ISO group K) and is designed to handle the abrasive, brittle chip behaviour typical of these alloys. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKK20S grade increases resistance to abrasive wear, extending tool life and maintaining surface quality during continuous cast iron turning operations. Which chipbreaker is fitted and what does it deliver? The insert features the MK5 chipbreaker, which produces controlled, compact chips and enhances process stability during grooving and shoulder turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
SNMG150616-MP5 WPP10G Wendeplatten - Walter Tools
Reliable turning performance is achieved with the combination of the Tiger‑tec Gold coating and the MP5 chipbreaker, delivering consistent chip control and extended edge life; a cost‑efficient choice for serial steel machining. Order the insert directly via Metav Werkzeuge or consult our specialists for process integration. SNMG150616-MP5 WPP10G – Turning indexable insert for steel, Tiger‑tec Gold (Walter Tools) A SNMG150616-MP5 WPP10G insert engineered for precision turning of steel, offering robust edge strength and optimised chip control in demanding production environments. Tiger‑tec Gold coating for long tool life MP5 chipbreaker for reliable chip control Square 90° shape for versatile turning 1.6 mm corner radius for robust edge strength Maximise machining uptime with stable cutting performance The combination of the Tiger‑tec Gold coating and the MP5 chipbreaker delivers measurable benefits in daily shopfloor use. The specialised coating provides enhanced wear resistance and thermal stability, which leads to longer tool life and fewer indexings. The MP5 geometry stabilises chip formation during medium and heavy cuts, improving cycle-time predictability and reducing the risk of built-up edge. For production planners this translates into higher machine utilisation and more consistent component quality, making the insert a rational choice where throughput and repeatability are priorities. Consistent results for steel turning through dedicated design Designed specifically for the machining of steel (P), the insert’s 0° negative rake and square 90° form support a wide range of turning operations, from roughing to medium finishing. The 1.6 mm corner radius increases edge resilience under intermittent cuts and contributes to improved surface integrity on workpieces. The M tolerance class ensures reliable seating and repeatable indexing in compatible toolholders. Technical decisions such as negative rake and corner radius are selected to balance cutting forces and edge strength, so shops see fewer edge failures and steadier part tolerances. Simple integration and dependable process security The SNMG form is a widely supported indexable format, easing tool inventory management and holder compatibility. The coated carbides in the WPP10G grade are intended for broad steel applications, offering a compromise between wear resistance and toughness that suits mixed production runs. Expected benefits include reduced tooling change frequency and improved surface finish stability. For engineers seeking to validate cutting data or optimise flank wear, this insert delivers process security that supports predictable cycle times and reduced scrap rates, thereby strengthening overall manufacturing efficiency. Choose Walter Tools’ Tiger‑tec Gold SNMG150616‑MP5 WPP10G for demanding steel turning — contact Metav Werkzeuge for application advice or order coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: SNMG150616-MP5-WPP10G-WALTER Product: SNMG150616-MP5 WPP10G Type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Inscribed circle / size: 15 mm Corner radius: 1.6 mm Thickness: 06 (6 mm) Relief angle: 0° negative Shape: Square 90° Tolerance class: M Special features Chipbreaker: MP5 Grade: WPP10G (coated carbide) Material suitability: Steel (P) Execution: G ISO designation: SNMG150616-MP5 WPP10G FAQ What materials is this insert suitable for? The SNMG150616‑MP5 WPP10G is designed primarily for steel (P) applications; the WPP10G grade and Tiger‑tec Gold coating are optimised for the heat and chip characteristics typical of unalloyed and alloyed steels. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert controls chip formation for stable evacuation and reduced entanglement, improving process reliability in turning operations and easing handling after cutting. What does the 0° negative rake mean for cut behaviour? A 0° negative rake increases edge strength and helps absorb shocks during interrupted or heavy cuts; in this SNMG insert it contributes to consistent tool life and secure performance on tougher turning tasks. Is the SNMG150616 format widely compatible with holders? Yes, the SNMG150616 form is a standard indexable geometry; the SNMG150616‑MP5 WPP10G fits common toolholder systems designed for SNMG inserts, simplifying tool setup and stock management. Which feature most affects tool life in mixed production runs? The Tiger‑tec Gold coating combined with the WPP10G grade offers a balance of wear resistance and toughness, which typically yields extended edge life across varied steels and cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) headquartered in Tübingen is one of the world’s leading manufacturers of precision metalworking tools. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanation only. There is no affiliation between our company and the named brands; the item offered is original, factory‑new goods of the manufacturer.
SNMG150616-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a robust insert grade and a proven chipbreaker to increase uptime and achieve consistent surface finish in steel turning operations; order directly via Metav Werkzeuge or consult the team for application-specific guidance. SNMG150616-MP5 WPP20G square insert — Walter Tools (Tiger·tec Gold), 1.6 mm radius SNMG150616-MP5 WPP20G is a square indexable turning insert designed for heavy-duty and general steel machining, combining a durable coated carbide grade with a chipbreaker optimised for ISO P materials. Tiger·tec Gold coated carbide for long tool life MP5 chipbreaker for controlled chip formation Square 90° form for versatile turning operations Increased process reliability for steel machining The coated carbide grade WPP20G from the Tiger·tec Gold family is formulated specifically for the thermal and mechanical demands of steel turning (ISO group P). The combination of coating technology and carbide substrate provides improved wear resistance and stable edge retention, which translates into longer tool life and fewer tool changes. For production environments, this means steadier cycle times and reduced secondary operations due to consistent surface quality. The designation indicates suitability across a range of steel applications, favouring both universal use and resistance to wear. Strong cutting edge and dependable chip control A square 90° shape with a 1.6 mm corner radius yields a robust cutting edge that tolerates higher cutting forces and occasional interruptions. The MP5 chipbreaker is tuned for typical steel chip behaviour; it regulates chip curl and evacuation to prevent tangling and tool damage. The insert’s 0° (negative) clearance characteristic increases edge strength and reduces the risk of edge chipping during heavy cuts. In practice, these features improve process stability and make machining of medium to demanding steel grades more predictable. Practical benefits on the shop floor Using this insert reduces unplanned downtime and supports higher material removal rates where edge life and reliability matter. The coated grade helps to maintain consistent part tolerances and surface finish between indexings, lowering scrap rates. Because the design focuses on universal steel performance, fewer grade changes are required across mixed production batches, simplifying inventory and tool management. The result is a measurable productivity uplift for shops aiming to balance cutting performance with economic tool consumption. Integration and handling notes for efficient setup The insert is identified as SNMG150616-MP5 WPP20G and is produced in a square 90° format with thickness code 06 and inscribed size 15. The geometry and chipbreaker choice make it suitable for a broad range of turning setups, from stable heavy-duty roughing to mixed finishing tasks in steel. When mounting, ensure correct clamping torque and seat cleanliness to preserve the coated layer and prevent micro-movement. Where coolant and cutting parameters are concerned, follow established manufacturer recommendations for steel to exploit the coating and substrate balance fully. For application-specific recommendations and to source original Walter Tools inserts such as the SNMG150616-MP5 WPP20G, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: SNMG150616-MP5-WPP20G-WALTER Designation: SNMG150616-MP5 WPP20G Product type: Indexable turning insert (drehwendeschneidplatte) Brand: Walter Tools Core specifications Insert size: 15 Corner radius: 1.6 mm Thickness code: 06 Shape: Square 90° Clearance angle: 0° (negative) Tolerance class: M Materials & special features Grade: WPP20G (Tiger·tec Gold coated carbide) Chipbreaker: MP5 Suitable for: Steel (ISO P) Series: Tiger·tec Gold Form designation: SNMG150616-MP5 FAQ What materials is this insert intended for? The SNMG150616-MP5 WPP20G is optimised for steel machining (ISO P); the grade and chipbreaker are tuned for typical steel heat and chip behaviour. How does the MP5 chipbreaker benefit production? The MP5 chipbreaker controls chip formation and evacuation when cutting steel, reducing chip entanglement and improving surface quality during continuous and interrupted cuts. Is the insert suitable for interrupted cuts and heavy roughing? Yes — the square 90° form with a 1.6 mm corner radius and 0° (negative) clearance offers a strong edge geometry that withstands higher forces and occasional interruptions. Can this grade deliver longer tool life compared with standard uncoated grades? The WPP20G coating technology from Tiger·tec Gold enhances wear resistance and edge stability, which typically results in longer tool life under comparable cutting conditions in steel. Which designation should be ordered for this specific insert? Order the insert as SNMG150616-MP5 WPP20G (Walter Tools) to ensure the correct geometry, chipbreaker and grade are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The offered article is an original, factory-new product from the stated manufacturer.
SNMG150616-NRS WSM10S WSM10S Wendeplatten - Walter Tools
Combining robust edge stability, optimised chip control and a square 90° geometry results in consistent performance for demanding turning operations; order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. SNMG150616-NRS WSM10S turning insert by Walter Tools — Tiger·tec Silver, negative 0° rake The SNMG150616-NRS WSM10S is a square indexable turning insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant alloys, offering reliable chip control and thermal resistance in challenging turning tasks Tiger·tec Silver coated carbide Secure chip control with NRS breaker Square 90° geometry, 1.6 mm corner Negative 0° rake for robust cutting High process security for demanding materials The coated carbide grade Tiger·tec Silver in combination with the WSM10S specification delivers high thermal stability and consistent edge life when machining rostfreier Stahl and superalloys. The insert’s coating technology reduces friction at the cutting edge, which helps to avoid built-up edge and supports a controlled chip flow. This translates into fewer interruptions on the shop floor and a steady repeatable output, improving overall throughput for production-oriented turning tasks. Reliable chip management and surface quality Equipped with the NRS chipbreaker, the insert ensures regular chip segmentation and evacuation under heavy cutting conditions. The chip geometry supports short, controllable chips that reduce the risk of entanglement and tool damage, while the square 90° configuration offers stable support during shoulder and facing cuts. As a result, users can achieve improved surface finish and dimensional stability with lower rework rates, even on tough-to-machine alloys. Robust geometry for stable cutting performance The negative 0° rake and a corner radius of 1.6 mm give the insert increased mechanical strength at the cutting edge, making it particularly suitable for interrupted cuts and hard engagement angles. The compact square form provides four usable cutting edges per indexable insert, offering cost-efficient edge use and quick index changes. This geometry supports conservative feed rates with high cutting forces, contributing to a secure machining window in production environments. Practical benefits and application guidance Specified for groups S and M according to ISO, the grade is especially aimed at heat-resistant superalloys and rostfreier Stahl, where thermal load and edge wear are critical. The insert thickness and tolerance class support interchangeability in common toolholders designed for this SNMG format. For customers evaluating tooling strategies, this solution balances edge durability and chip control to reduce machine downtime and optimise tool-life-related costs. For reliable turning of rostfreier Stahl and high-temperature alloys choose the Walter Tools SNMG150616-NRS WSM10S — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SNMG150616-NRS-WSM10S-WALTER Designation: SNMG150616-NRS WSM10S Series: Tiger-tec Silver Manufacturer: Walter Tools Key dimensions Insert size: 15 mm Corner radius: 1,6 mm Thickness: 06 Geometry: Square 90° Rake angle: 0° (negativ) Materials & features Grade: WSM10S (coated carbide) Chipbreaker: NRS Suitable for: S / M Execution: G Tolerance class: M Application: Heavy-duty turning, rostfreier Stahl and superalloys FAQ What materials is this insert best suited for? The SNMG150616-NRS WSM10S is designed primarily for rostfreier Stahl and heat-resistant superalloys (groups M and S), delivering stable chip control and thermal resistance. How does the NRS chipbreaker affect machining? The NRS chipbreaker on the SNMG150616-NRS WSM10S produces short, controlled chips, which improves evacuation and reduces the risk of chip re-cutting and tool damage. Is this insert compatible with standard SNMG toolholders? Yes, the SNMG150616-NRS format follows common SNMG dimensions and fits holders specified for this insert family, facilitating quick index changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150616-NRS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for stable cutting of stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our technical advisors for process matching. SNMG150616-NRS WSM20S — indexable turning insert (for stainless steels & superalloys) by Walter Tools A SNMG150616-NRS WSM20S indexable turning insert engineered for robust, high‑temperature performance in demanding turning operations on stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated carbide technology Suitable for stainless steels and superalloys Negative 0° rake for stable cutting Square 90° insert with 1.6 mm nose radius Consistent performance on demanding alloys The combination of the WSM20S coated carbide and the Tiger·tec Silver coating provides high thermal resistance and controlled wear, resulting in consistent tool life when machining stainless steels and heat‑resistant alloys. The coating reduces diffusion and chemical wear at elevated temperatures, which supports a stable cutting edge and predictable regrinding intervals. In production terms, this means fewer tool changes and a more consistent surface finish on difficult‑to‑machine materials, enhancing throughput without sacrificing repeatability. Geometry engineered for process security The insert’s negative 0° rake and square 90° form create a mechanically robust cutting edge that resists chipping under interrupted cuts and heavy cross‑sections. The 1.6 mm nose radius balances edge strength with surface integrity, enabling secure chip formation with the NRS chipbreaker that is tuned for tight, controllable chips on tough alloys. These geometric choices reduce vibration and support reliable cutting forces, which helps maintain dimensional stability and reduces scrap rates in batch and single‑piece production alike. Application guidance and material suitability Designed for the machining groups indicated by ISO 513, this grade is suited to materials classified under M and S — namely stainless steels and heat‑resistant superalloys/titanium — where high temperatures and built‑up edge tendencies challenge standard grades. The NRS chipbreaker promotes consistent evacuation of small, compact chips, improving safety and machining consistency. For set‑up, select cutting parameters that favour moderate cutting speeds with appropriate coolant strategies for stainless steels and reduced heat‑transfer alloys to exploit the grade’s thermal resistance and edge stability. For application advice or to order Walter Tools Tiger·tec Silver inserts including the SNMG150616-NRS WSM20S, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised recommendations and availability Technical data Article number: SNMG150616-NRS-WSM20S-WALTER Designation: SNMG150616-NRS WSM20S Manufacturer: Walter Tools Facts Insert size: 15 Thickness: 06 Corner radius: 1.6 mm Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Silver Carbide grade: WSM20S (coated carbide) Chipbreaker: NRS Shape: Square 90° Series: Tiger‑tec Silver Suitable for: stainless steels (M), heat‑resistant superalloys / titanium (S) Application: turning / indexable insert FAQ What materials is this insert suitable for? The SNMG150616-NRS WSM20S insert is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys/titanium. How does the Tiger·tec Silver coating benefit the cutting process? Tiger·tec Silver on the WSM20S grade increases thermal resistance and reduces chemical wear, which helps maintain a stable cutting edge and extends useful tool life under elevated temperatures. What is the purpose of the negative 0° rake? A negative 0° rake enhances edge robustness and resistance to chipping, providing process security during interrupted cuts and heavy cross‑section turning with the SNMG150616-NRS geometry. Which chip formation behaviour can be expected with the NRS chipbreaker? The NRS chipbreaker produces short, controllable chips suited to stainless steels and superalloys, improving chip evacuation and operator safety with consistent surface results. Is the corner radius fixed, and what surface finish does it enable? The insert features a 1.6 mm nose radius, which is a compromise between edge strength and finish quality, supporting good surface integrity on demanding materials. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150616-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of a high‑performance, coated WSM20S grade combined with the Tiger·tec Silver series for stable cutting in demanding materials; the square 90° SNMG insert with 1.6 mm corner radius and RM5 chipbreaker ensures consistent chip control and long tool life. Order directly via Metav Werkzeuge or consult their advisors for application-specific recommendations. SNMG150616-RM5 WSM20S indexable turning insert – Tiger·tec Silver for stainless steel and superalloys (Walter Tools) The SNMG150616-RM5 WSM20S is a square 90° indexable turning insert with Tiger·tec Silver coating, designed for heavy machining of stainless steel and heat‑resistant superalloys. Tiger·tec Silver coating for heat resistance WSM20S grade for stainless and superalloys RM5 chipbreaker for stable chip control Square 90° form with 1.6 mm corner radius High‑temperature stability and material compatibility for secure productivity The combination of the Tiger·tec Silver coating and the WSM20S carbide grade provides improved thermal stability and predictable wear behaviour when machining stainless steel and high‑temperature alloys. The coating technology helps dissipate heat from the cutting edge, which reduces the tendency for built‑up edge and supports a stable cutting edge life. For shops tackling persistent heat and work‑hardening challenges, this geometry and grade translate into fewer interventions and steadier component quality. Consistent chip control and cutting reliability to reduce rework The RM5 chipbreaker is tuned for reliable chip formation in tough, adhesive materials, enabling regular chip segmentation and safe evacuation. The negative 0° relief geometry and the square 90° insert form increase edge strength and support interrupted cuts or unstable clamping conditions. As a result, machining cycles become more predictable and the risk of surface defects or rework is reduced, improving overall process security on demanding turning operations. Practical workshop benefits that improve uptime and handling A 15 mm square insert with a 1.6 mm corner radius gives a balance between strength and dimensional accuracy: robust enough for heavier cuts while still allowing acceptable contouring and finish. The insert thickness and M tolerance class support repeatable indexing in standard toolholders. These features together mean fewer tool changes, simpler inventory management, and better utilisation of machine time in mixed‑batch production environments. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools inserts — Metav Werkzeuge can advise on feed and speed recommendations, holder compatibility and process parameters Technical data SKU: SNMG150616-RM5-WSM20S-WALTER Article: SNMG150616-RM5 WSM20S Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: RM5 Form: Square 90° Relief angle: 0° (negative) Corner radius: 1.6 mm Insert size: 15 mm Thickness: 06 Tolerance class: M Facts Applicable material groups: S (superalloys, titanium), M (stainless steel) Coating: Tiger·tec Silver Material designation: coated carbide Geometry: negative, robust edge Typical use: heavy duty and heat‑resistant materials Special features Stable chip control via RM5 chipbreaker Designed for thermal stability and edge security Square 90° form for versatile turning applications Suitable for interrupted cuts and difficult‑to‑machine alloys FAQ What materials is this insert suited for? The SNMG150616-RM5 WSM20S insert is intended for stainless steel (M) and heat‑resistant superalloys/titanium (S), exploiting the Tiger·tec Silver coating and the WSM20S grade for improved edge stability. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes predictable chip segmentation in adhesive and work‑hardening materials, improving evacuation and reducing the risk of entanglement during turning with the SNMG150616-RM5 WSM20S insert. Which toolholders are compatible with the SNMG150616-RM5 insert? Standard toolholders for SNMG inserts that accept 15 mm square, 90° geometry and M tolerance class are compatible; the negative geometry requires holders rated for robust indexable inserts. Is this insert suitable for interrupted cuts? Yes, the square 90° form, 1.6 mm corner radius and negative 0° relief combine to provide enhanced edge strength suitable for interrupted and heavy cutting conditions. Can this insert improve surface finish on stainless parts? When used with correct feeds and speeds, the thermal stability of Tiger·tec Silver and the WSM20S grade contribute to consistent cutting action and a reduction of built‑up edge, which helps achieve improved surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between Metav Werkzeuge and the named brands. The offered article is original, brand‑new goods from the manufacturer (Walter Tools).
SNMG150616-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the robust WSM30S grade for reliable performance when machining stainless steels and heat-resistant superalloys; the square 90° geometry with a 1.6 mm corner radius and RM5 chipbreaker ensures stable chip formation and predictable tool life. Order or request application advice via Metav Werkzeuge for precise tooling recommendations. SNMG150616-RM5 WSM30S — Indexable turning insert, Tiger·tec Silver, for stainless steels and superalloys | Walter Tools SNMG150616-RM5 WSM30S is an indexable turning insert designed for demanding turning operations in stainless steels and heat‑resistant superalloys; suitable for applications requiring stable cutting edges and controlled chip formation. Tiger·tec Silver coated carbide grade WSM30S Square 90° insert form for strong edges RM5 chipbreaker for controlled chips 0° negative rake angle for edge robustness High productivity for demanding materials The combination of the WSM30S coating and a coated carbide substrate provides a balance of wear resistance and toughness, optimised for machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). The Tiger·tec Silver technology reduces flank wear and supports stable chip formation, which in turn leads to longer tool life and fewer interruptions in production. For turning operations where workpiece material tends to work harden or generates heat, this insert delivers consistent performance. Edge stability and chip control for secure machining A 0° negative rake angle gives the cutting edge increased support and resistance to mechanical and thermal loads, making the geometry well suited to interrupted cuts and hardening surfaces. The RM5 chipbreaker is engineered to produce short, manageable chips under varying cutting parameters, lowering the risk of built‑up edge and improving surface finish. The 1.6 mm corner radius reinforces the edge, providing a compromise between strength and finish quality for demanding turning tasks. Seamless integration and predictable production results The SNMG ISO designation ensures compatibility with standard toolholders for square inserts, simplifying tool set‑up and inventory management. The insert’s square 90° form delivers multiple usable cutting edges, supporting cost‑efficient indexing in batch production. Clear material classification (S / M) aids process selection: choose cutting data tuned to the WSM30S grade for reliable, repeatable results. For process planning, the combination of geometry and grade enables stable cycle times and helps reduce scrap rates. Select the Walter Tools Tiger·tec Silver SNMG150616-RM5 WSM30S when machining stainless steels and superalloys — contact Metav Werkzeuge for tailored application support and tooling optimisation at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: SNMG150616-RM5-WSM30S-WALTER Designation: SNMG150616-RM5 WSM30S Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Core specifications Insert form: Square 90° Size: 15 Corner radius: 1.6 mm Rake angle: 0° (negative) Chipbreaker: RM5 Thickness code: 06 Tolerance class: M Execution: G Materials & features Coating: Tiger·tec Silver (coated carbide) Suitable for: stainless steels (M) Suitable for: heat‑resistant superalloys / titanium (S) Application: turning / indexable insert machining Material code: S / M FAQ What materials is this insert designed to machine? The SNMG150616-RM5 WSM30S is specified for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), matching the intended use of the WSM30S grade and Tiger·tec Silver coating. What is the purpose of the RM5 chipbreaker? The RM5 chipbreaker on this insert controls chip shape and evacuation, promoting short, controllable chips and helping to prevent built‑up edge during turning with the SNMG150616-RM5 WSM30S. How does the 0° negative rake affect cutting performance? A 0° negative rake angle strengthens the cutting edge and improves resistance to thermal and mechanical shock, which is beneficial when using the WSM30S grade on tougher materials. Which toolholders are compatible with this insert? The SNMG ISO format indicates compatibility with standard toolholders designed for SNMG inserts; the square 90° shape provides multiple indexable edges for efficient reuse. What are the advantages of the Tiger·tec Silver series for production? Tiger·tec Silver coating enhances wear resistance and thermal stability, delivering predictable tool life and consistent surface quality when machining demanding materials with the SNMG150616-RM5 WSM30S. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is a brand of Walter AG (brand appearance: Walter Tools) and part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SNMG150616-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
SNMG150616-RP5 WPP10G Drehwendeschneidplatte von Walter Tools Die SNMG150616-RP5 WPP10G Drehwendeschneidplatte ist eine beschichtete Hartmetallplatte aus der Tiger-tec Gold Serie, ausgelegt für produktive Zerspanung von Stahl in Drehanwendungen. SNMG150616-RP5 von Walter Tools Tiger-tec Gold Beschichtung für hohe Standzeit Optimierter Spanbrecher RP5 für saubere Spanbildung Quadrat 90° mit Eckenradius 1,6 mm für präzise Schnitte Negativfreiwinkel 0° für stabile Schneidkante Haltbarkeit durch moderne Beschichtung für längere Standzeiten Die Tiger-tec Gold Beschichtung kombiniert Verschleißfestigkeit und thermische Stabilität, sodass die Wendeschneidplatte besonders bei der Bearbeitung von Stahl konstant leistungsfähig bleibt. Anwender profitieren von gleichbleibender Schneidkante und reduzierten Rüstzeiten, da weniger Plattenwechsel erforderlich sind. Die Sorte WPP10G steht für ein ausgewogenes Verhältnis zwischen Standzeit und Vielseitigkeit, wodurch sie sich für Serien- und Losfertigung eignet. Präzision durch Geometrie und Spanform für saubere Oberflächen Mit dem RP5 Spanbrecher und dem Eckenradius von 1,6 mm liefert die Platte eine kontrollierte Spanbildung, die Oberflächenqualität verbessert und Werkzeugbelastung reduziert. Die quadratische Plattenform mit 90° schafft robuste Schneidkanten und unterstützt stabile Schnittbedingungen, besonders bei mittleren Schnittwerten und anspruchsvollen Schnittprozessen. Dadurch sinkt der Ausschuss und die Nachbearbeitung wird minimiert. Einsatzspektrum und Zielgruppe für effiziente Fertigung Die Wendeschneidplatte richtet sich an Drehereien, Lohnfertiger und CNC-Bearbeitungszentren, die Stahl mit hoher Prozessstabilität bearbeiten. Anwender, die Wert auf reproduzierbare Ergebnisse und einfache Sortenwahl legen, finden in dieser Platte eine praxisnahe Lösung. Die Ausführung G und die Toleranzklasse M gewährleisten eine verlässliche Passform in Standard-Sitzhaltern und erleichtern das Handling im Fertigungsalltag. Wirtschaftlichkeit und Prozesssicherheit durch optimierte Eigenschaften Aufgrund der Kombination aus robuster Beschichtung und ausgelegter Schneidstoffzusammensetzung reduziert sich der Werkzeugverbrauch pro Bauteil. Das führt zu niedrigeren Stückkosten und planbaren Produktionsabläufen. Gleichzeitig unterstützt die stabile Spanform eine sichere Maschinenauslastung, wodurch Stillstandsrisiken verringert werden und die Fertigungsleistung insgesamt steigt. Empfehlung: Vertrauen Sie auf die Tiger-tec Gold Sorte WPP10G von Walter Tools für leistungsfähige und wirtschaftliche Zerspanung; bei technischen Fragen und zur Auswahl der passenden Platten steht das Metav-Team gern zur Verfügung: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produkteigenschaften Artikelnummer: SNMG150616-RP5-WPP10G-WALTER Marke: Walter Tools Serie / Baureihe: Tiger-tec Gold Ausführung: G Toleranzklasse: M Fakten Eckenradius: 1,6 mm Plattengröße: 15 mm Plattendicke: 06 Freiwinkel: 0° (negativ) Besonderheiten Spanbrecher: RP5 (optimierte Spanform für Stahl) Plattenform: Quadrat 90° Beschichtung / Schneidstoff: beschichtetes Hartmetall, Tiger·tec Gold Sorte: WPP10G (für Stahl, ISO P) Sorteneinsatz: Stahl (unlegierte und legierte Stähle) FAQ Welche Werkstoffe bearbeitet die SNMG150616-RP5 am besten? Die SNMG150616-RP5 mit der Sorte WPP10G ist speziell für Stahl ausgelegt und liefert bei unlegierten sowie legierten Stählen sehr gute Ergebnisse. Wie beeinflusst der Freiwinkel 0° die Anwendung? Ein Freiwinkel von 0° sorgt für eine stabile Schneidkante und erhöhte Schneidkantenfestigkeit, wodurch die SNMG150616-RP5 besonders bei mittleren bis schweren Schnittbedingungen verlässlich arbeitet. Wann ist die Sorte WPP10G die richtige Wahl? Die WPP10G Sorte eignet sich, wenn Prozesssicherheit und gute Standzeit bei der Bearbeitung von Stahl gefragt sind; sie bietet ein ausgeglichenes Verhalten zwischen Verschleißfestigkeit und Zähigkeit. Welche Vorteile bringt der RP5 Spanbrecher in der Praxis? Der RP5 Spanbrecher unterstützt eine kontrollierte Spanbildung, verbessert die Oberflächengüte und reduziert das Risiko von Spanverwicklungen bei der SNMG150616-RP5 Platte. Kann die Platte in Standard-Sitzhaltern verwendet werden? Ja, die Ausführung G und die Toleranzklasse M ermöglichen die Montage in gängigen Werkzeughaltern für Drehbearbeitung. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SNMG150616-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the RP5 chipbreaker and a robust square geometry to achieve stable chip control and predictable tool life in steel turning. Order the SNMG150616-RP5 WPP20G insert directly via Metav Werkzeuge or consult the technical advisors for cutting data and application support. SNMG150616-RP5 WPP20G turning insert — Tiger·tec Gold, for steel · Walter Tools SNMG150616-RP5 WPP20G is a square 90° indexable turning insert designed for reliable performance in steel machining, featuring an RP5 chipbreaker and a coated‑carbide grade from the Tiger·tec Gold range Tiger·tec Gold coating for long tool life RP5 chipbreaker for stable chip control Square 90° geometry with 1.6 mm corner radius 0° negative rake for robust cutting High productivity for steel turning with controlled chips The combination of the WPP20G grade and Tiger·tec Gold technology delivers a coated carbide cutting edge engineered for the thermal and metallurgical conditions typical of steel machining (ISO P). The RP5 chipbreaker is tuned to produce short, controllable chips across a range of turning operations, which reduces interruptions and increases effective machining time. This results in smoother process flows and fewer tool changes, supporting higher productivity on lathes and turning centres. Predictable edge life and robust cutting performance A 0° negative rake and the square 90° insert geometry provide a strong cutting edge capable of withstanding interrupted cuts and tougher conditions. The 1.6 mm corner radius contributes to a durable edge and consistent surface finishes while limiting the risk of premature chipping. These geometric choices translate directly into reduced rework and steadier batch quality, particularly in mixed production where repeatability and tool life are critical. Compact dimensions, straightforward tool selection and setup With a plate size of 15 mm and a thickness of 6 mm, the insert fits standard SNMG toolholders and offers clear, measurable specification for fixture and toolpost planning. The grade designation WPP20G signals suitability for a wide range of steels, making grade selection and inventory management easier. For best results, match feeds and speeds to the material and machine rigidity; cutting data can be supplied to align tool choice with component tolerances and cycle‑time targets. Contact Metav Werkzeuge for ordering, cutting data and application recommendations on Walter Tools SNMG150616-RP5 WPP20G Tiger·tec Gold inserts; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: SNMG150616-RP5-WPP20G-WALTER Designation: SNMG150616-RP5 WPP20G Type: Turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Plate size: 15 mm Plate thickness: 6 mm Corner radius: 1.6 mm Geometry: Square 90° Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: RP5 Application group: Steel (ISO P) Suitable for unalloyed and alloyed steels Designed for stable chip formation and high process reliability FAQ What materials is this insert intended for? The SNMG150616-RP5 WPP20G insert is designed primarily for steel machining (ISO P), covering both unalloyed and alloyed steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes short, controllable chips and consistent chip evacuation, which improves process stability and reduces downtime related to chip management. What are the key dimensions to check for toolholder compatibility? Check the insert's plate size of 15 mm, thickness 6 mm and the square 90° form; these dimensions determine compatible SNMG toolholders and clamping securement. Is WPP20G suitable for finishing operations? Yes, the WPP20G grade in Tiger·tec Gold provides a balance of wear resistance and toughness suitable for finishing and general‑purpose turning in steel. How does the 0° negative rake benefit turning operations? The 0° negative rake gives a stronger cutting edge for heavy or interrupted cuts, enhancing edge security and reducing the likelihood of chipping under load. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for identification and explanation only; there is no affiliation implied between Metav Werkzeuge and the trademark owners. The offered item is original and factory‑new.
SNMG150616-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Robust, coated carbide insert engineered for high productivity in steel turning: Tiger·tec Gold with the WPP30G grade improves wear resistance while the RP5 chipbreaker ensures controlled chip formation and reliable surface quality. Order directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. SNMG150616-RP5 WPP30G – Square 90° indexable turning insert, Tiger·tec Gold, Walter Tools The SNMG150616-RP5 WPP30G is a square 90° indexable turning insert designed for dependable steel machining, combining a wear‑resistant Tiger·tec Gold coating with an RP5 chipbreaker for stable metal removal. Tiger·tec Gold coating for longer life RP5 chipbreaker for controlled chips Square 90° form with 1.6 mm corner radius Negative 0° rake for robust cutting Predictable tool life through optimised coating technology The coated carbide composition in this grade, marketed under Tiger·tec Gold, delivers consistent wear resistance and thermal stability during extended runs. The designation WPP30G denotes a Walter grade tuned for steel applications (ISO group P), balancing toughness and wear resistance for a broad range of unalloyed and alloyed steels. Coated carbide means a hard substrate with a specialised surface layer; this reduces flank wear and helps maintain dimensional accuracy over longer tool life, which in turn improves process reliability and lowers tooling costs per part. Precise chip control and stable cutting geometry The RP5 chipbreaker is designed to shape chips reliably during turning, reducing the risk of long, tangled swarf and improving evacuation in continuous operations. Combined with the negative 0° rake geometry and a 1.6 mm corner radius, this creates a stable cutting edge that tolerates interrupted cuts and varying depths of cut. The square 90° form provides four usable cutting edges per index, allowing cost‑effective indexing and straightforward seat positioning in standard tool holders. These geometric choices translate directly into lower downtime and more consistent surface finish on the workpiece. Application focus and process advantages for steel machining This insert is specified for steel (ISO P) and is suited to general to heavy turning tasks where process stability and repeatability are priorities. The tolerance class M indicates a medium precision grade appropriate for series production without excessive setup sensitivity. The series affiliation and chipbreaker pairing support efficient material removal rates and predictable tool life, which helps to plan tool changes and minimise unproductive machine time. For shops demanding steady throughput and predictable results on steel components, this insert offers a clear performance profile. For process-stable turning with the Tiger·tec Gold grade, contact Metav Werkzeuge for tailored recommendations or to place an order; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on cutting data and toolholder compatibility. Technical Data Article number: SNMG150616-RP5-WPP30G-WALTER Product type: Indexable turning insert WPL designation: SNMG150616-RP5 WPP30G Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Inscribed circle / size: 15 Corner radius: 1,6 Free cutting angle: 0° (negativ) Plate thickness code: 06 Plate form: Quadrat 90° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: RP5 Material application: Steel (ISO group P) Execution: G Sortenbeschreibung: WPP30G – designed for steel machining FAQ What materials is this insert suitable for? The SNMG150616-RP5 WPP30G Walter Tools indexable insert is specified for steel (ISO P), covering unalloyed and alloyed steels where robust chip control is required. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WPP30G grade enhances wear resistance and thermal stability, resulting in more consistent tool life and improved surface finish during continuous turning operations. What is the purpose of the RP5 chipbreaker? The RP5 chipbreaker shapes and breaks chips reliably, reducing swarf entanglement and improving evacuation, which supports safer and more efficient production runs. How many cutting edges are available per insert? The square 90° form provides four indexable cutting edges; the geometry and corner radius allow economical indexing and repeatable seating in standard holders. What does the tolerance class M indicate for this insert? Tolerance class M denotes a medium precision grade suitable for serial production where a balance between accuracy and robustness is required. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation; the offered article is original factory-new goods of the manufacturer.
SNMG150616-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated RP7 chipbreaker and a robust square geometry to maintain stable cutting and extended edge life in steel and cast iron turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for tailored machining advice. SNMG150616-RP7 WKP30S turning insert — Tiger·tec Silver, for steel and cast iron, Walter Tools SNMG150616-RP7 WKP30S is an indexable turning insert designed for reliable finishing and medium-duty roughing of steels and cast irons in industrial machining environments Tiger·tec Silver coating for enhanced edge life Optimised RP7 chipbreaker for stable chips Square 90° form with 1.6 mm corner radius Suited to steel (P) and cast iron (K) machining Precision and process security for steel and cast iron machining The Tiger·tec Silver series insert, designated WKP30S, is a coated carbide grade engineered for consistent performance when machining ISO groups P and K (steel and cast iron). Its combination of a wear-resistant coating and a tailored substrate reduces flank and crater wear, which leads to longer tool life and fewer indexings during a production run. For plants seeking measurable gains in throughput, the insert’s design supports reproducible chip formation and keeps cycle times predictable under standard turning conditions. Geometry that supports stable cutting and predictable surface quality The square 90° insert form with a 1.6 mm corner radius and a negative 0° relief angle provides a rigid cutting edge and low cutting forces in axial engagement. The RP7 chipbreaker is optimised to control short, breaking chips typical for cast irons and many steels, improving swarf handling and allowing closer control of surface finish. These geometry choices result in reliable contact between workpiece and toolholder, which reduces vibration and helps achieve consistent surface integrity on each component. Practical benefits for workshop and production environments With the SNMG format and its 15 mm size, the insert fits widely used toolholders and clamping systems, simplifying stock management. The coating/substrate combination of the WKP30S grade aims to deliver stable cutting over a broad range of steels and cast irons, reducing downtime for tool changes and enabling predictable regrinding or replacement intervals. For users with mixed production lots, this insert offers an effective balance between wear resistance and toughness, which translates to fewer interruptions and better overall productivity. Contact Metav Werkzeuge today for personalised recommendations on clamping, cutting data and supply of Walter Tools SNMG150616-RP7 WKP30S Tiger·tec Silver inserts for steel and cast iron applications Technical Data Article number: SNMG150616-RP7-WKP30S-WALTER Label: Drehwendeschneidplatte SNMG150616-RP7 WKP30S Walter Tools Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Facts Insert size: 15 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Plate thickness: 06 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP30S (coated carbide) Chipbreaker: RP7 Plate form: Square 90° Material applicability: P (steel), K (cast iron) Execution: G ISO designation: SNMG150616-RP7 WKP30S FAQ What materials is this insert suitable for? The SNMG150616-RP7 WKP30S insert from Walter Tools is suited for ISO groups P and K, meaning it is designed for machining steel and cast iron. What is the purpose of the RP7 chipbreaker? The RP7 chipbreaker on the SNMG insert promotes short, controllable chips and consistent swarf evacuation, which supports surface quality and operator safety in both steel and cast-iron turning. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP30S grade increases wear resistance and thermal stability, extending the effective cutting life of the insert under typical turning conditions. Is the square 90° form beneficial for certain operations? Yes, the square 90° geometry with a 1.6 mm corner radius gives a strong edge for both finishing and medium roughing, improving stability in axial engagement and allowing flexible toolholder setups. Can the SNMG150616-RP7 be used in automatic lathe applications? The insert’s form and chip control characteristics make the SNMG150616-RP7 suitable for many production turning scenarios; compatibility with automatic lathes depends on the chosen toolholder and clamping system. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
SNMG150616-RP7 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust chipbreaker RP7 and a 1.6 mm corner radius to secure process stability and predictable tool life in steel turning operations; order directly via Metav Werkzeuge or ask the consultants for application advice. SNMG150616-RP7 WPP10G SNMG150616-RP7 WPP10G Turning insert – Tiger‑tec Gold for steel (Walter Tools) SNMG150616-RP7 WPP10G is a square turning indexable insert designed for robust steel machining, offering the Tiger‑tec Gold coated carbide grade for high process security Tiger‑tec Gold coated carbide grade WPP10G Optimised for ISO P (steel) machining Chipbreaker RP7 for controlled chip formation Square 90° form with 1.6 mm corner radius High-performance steel turning that keeps production stable The combination of Tiger‑tec Gold coating and a coated carbide substrate provides enhanced wear resistance and thermal stability for demanding steel applications. Designed specifically for ISO P materials, the insert balances wear resistance and toughness to handle a wide spectrum of steel grades. The coating reduces abrasive wear and helps maintain a stable cutting edge, which translates into longer tool life and fewer index changes — a direct gain in uptime and machining economy. The description of the grade highlights its adaptability across finishing and medium-roughing tasks, where consistent chip formation and repeatable results matter most. Predictable chip control and reliable surface quality A dedicated chipbreaker RP7 and a corner radius 1.6 mm produce controlled chips and support secure engagement during interrupted cuts. The square 90° geometry offers a robust cutting edge that resists deflection, while the negative rake 0° edge angle increases edge strength for heavy cuts or unstable setups. For operators and process planners, this means fewer surprises at the machine: chips are discharged predictably, tool wear is regular, and the resulting surface finish is easier to reproduce. Where surface integrity and cycle-time consistency are priorities, the insert’s geometry contributes directly to process reliability. Economical machining through consistent tolerances and repeatability Tolerance class M and the standardised plate dimensions ensure interchangeability and consistent seating in stable toolholders. The insert’s format — compact 15 mm size and thickness 06 — supports a range of toolbody designs while maintaining stiffness at the cutting zone. By lowering the frequency of unplanned interventions and supporting longer tool life, the insert delivers an attractive total-cost-of-ownership profile for volume production. For buyers seeking a trustworthy grade from a recognised manufacturer, the Walter Tools specification combines proven material science with industrially tested chip control to help meet production targets with reduced variability. For tailored recommendations on integrating the Tiger‑tec Gold SNMG150616-RP7 WPP10G insert into specific turning processes, contact Metav Werkzeuge; technical consultants are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: SNMG150616-RP7-WPP10G-WALTER Designation: SNMG150616-RP7 WPP10G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Facts Plate size: 15 mm Corner radius: 1.6 mm Thickness: 06 Rake angle: 0° (negative) Tolerance class: M Special features Form: Square 90° Chipbreaker: RP7 Material application: Steel (ISO P) Coating technology: Tiger‑tec Gold Material base: coated carbide FAQ What materials is this insert suitable for? The insert is intended primarily for steel machining (ISO P); the WPP10G grade is optimised for typical steel heat generation and chip behaviour. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on this Walter Tools insert improves wear resistance and thermal stability, supporting longer tool life and consistent cutting-edge performance under production loads. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes controlled chip formation and safe evacuation, which reduces the risk of entanglement and supports stable cutting forces on the SNMG150616-RP7 WPP10G insert. What does a negative rake 0° mean in practice? A negative rake 0° increases edge strength and is advantageous for heavy cuts, interrupted cuts or less rigid setups, providing greater process security at the expense of slightly higher cutting forces. Is the insert suitable for finishing and roughing? Yes; the WPP10G grade is balanced for a range of operations on steel, offering a compromise between wear resistance and toughness that supports finishing and medium-roughing tasks. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com