SX-2E200R6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, stable chip control and high thermal resistance for reliable machining of stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for process optimisation. SX-2E200R6-CE4 WSM33G — turning insert (Tiger·tec Gold) for stainless steel · Walter Tools The SX-2E200R6-CE4 WSM33G is a coated carbide turning insert from the Tiger·tec Gold series, engineered for demanding applications in stainless steel and heat‑resistant superalloys with a focus on stable cutting edges and consistent chip formation Tiger·tec Gold grade WSM33G Coated carbide for high heat resistance Optimised chip control geometry 2E200R6-CE4 Suited for stainless steel and superalloys Consistent machining for hard‑to‑cut materials The SX-2E200R6-CE4 WSM33G insert is formulated to deliver stable cutting-edge performance when machining materials that generate heat and tend to work‑harden. The Tiger·tec Gold coating combines thermal resilience with wear resistance to reduce flank wear and maintain dimensional accuracy over longer tool life. For production environments, this translates into fewer interruptions, reduced rework and more predictable cycle times, supporting an efficient and reproducible turning process. Precise chip control that protects productivity The insert’s 2E200R6-CE4 chipbreaker geometry is designed to encourage controlled chip breakage and evacuation, which lowers the risk of built-up edge and improves surface finish on challenging alloys. By promoting short, consistent chips, the geometry also reduces the chance of toolholder interference and machine downtime. This technical advantage supports higher material removal rates and contributes to a measurable improvement in process stability and throughput. Material compatibility and application benefits Designed for the ISO groups M and S, the grade WSM33G targets stainless steels and heat‑resistant superalloys and offers an optimised balance of toughness and hardness. The coated carbide matrix provides heat resistance required for high cutting temperatures, while the coating’s wear characteristics preserve the cutting edge under heavy thermal load. In practice, this means improved component quality, repeatable tolerances and reliable performance across small‑batch work and serial production alike. Contact Metav Werkzeuge for tailored recommendations on toolholders, cutting parameters and application matching for Walter Tools turning inserts and to ensure optimal integration into production workflows Technical data SKU: SX-2E200R6-CE4-WSM33G-WALTER Label: Drehwendeschneidplatte SX-2E200R6-CE4 WSM33G Walter Tools Manufacturer: Walter Tools Product type: turning insert Series: Tiger·tec Gold Grade: WSM33G Numbers / Core data ISO designation: SX-2E200R6-CE4 WSM33G Geometry / chipbreaker: 2E200R6-CE4 Material groups: S / M Suitable for stainless steel: yes Special features / Versions Coating: Tiger·tec Gold (coated carbide) Primary applications: stainless steels, heat‑resistant superalloys, titanium alloys (depending on geometry) Key benefits: stable cutting edge, good chip control, high thermal resistance FAQ What materials is this insert best suited for? The SX-2E200R6-CE4 WSM33G turning insert by Walter Tools is optimised for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering the thermal resistance and edge stability needed for these workpieces. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WSM33G grade increases heat resistance and wear control, extending tool life and maintaining a stable cutting edge during prolonged turning operations in demanding materials. Which chipbreaker is integrated and why does it matter? The 2E200R6-CE4 chipbreaker geometry is supplied to promote predictable chip formation and evacuation, which reduces built‑up edge and improves surface finish while protecting the cutting edge. Is this insert suitable for high‑speed turning? Yes; the combination of coated carbide and the Tiger·tec Gold technology in this grade supports elevated cutting temperatures and can be applied in higher cutting‑speed scenarios, subject to correct machining parameters. Can this insert be used in serial production environments? The WSM33G grade is designed to provide repeatable performance and process security, making it suitable for serial production where consistent component quality and tool life are priorities. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-2E200R6-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the WSM33G grade and a robust chipformer for stable cutting-edge life and reliable machining of stainless steels and heat-resistant superalloys. Order the insert directly via Metav Werkzeuge or ask our consultants for application support. SX-2E200R6-CF5 WSM33G indexable turning insert — Tiger·tec Gold, Walter Tools The SX-2E200R6-CF5 WSM33G is an indexable turning insert designed for heavy-duty turning of stainless steels and heat-resistant superalloys, offering optimised chip control and enhanced resistance against thermal wear. Tiger·tec Gold coating for high wear resistance Grade WSM33G for stainless and superalloys Stable cutting edge for heavy-duty turning Optimised chipformer for secure chip control High-performance grade for demanding materials The WSM33G grade, based on coated carbide technology, is engineered to manage the challenges of machining stainless steels and superalloys. The Tiger·tec Gold coating enhances thermal stability and reduces the tendency for built-up edge, which leads to more consistent surface finish and fewer unscheduled tool changes. For shops tackling tough-to-machine components, this combination delivers more predictable machining windows and contributes to uninterrupted production cycles by protecting the cutting edge against abrasion and heat-induced wear. Reliable chip management and process stability The insert geometry identified by the 2E200R6-CF5 chipformer is configured for controlled chip formation and evacuation, reducing the risk of entangling chips in internal passages or on finished surfaces. With an emphasis on chip control and a stable cutting edge, the design supports continuous operation under elevated temperatures typical for high-alloy materials. That stability promotes repeatable component tolerances and reduces the need for secondary finishing, translating directly into improved throughput and lower per-part machining costs. Economic benefits and application advice for production environments Longer service intervals and consistent performance contribute to clear cost efficiency in series production. The insert is suitable for heavy turning operations where tool life and edge stability are decisive. For best results, match the insert geometry to the workpiece clamping and coolant strategy; choosing the correct grade and cutting data will extend tool life and enhance process reliability. Technical consultation is available for optimising cutting parameters and selecting the appropriate toolholder combination to maximise the advantages of this insert. Contact Metav Werkzeuge for tailored cutting data and to specify the Walter Tools SX-2E200R6-CF5 WSM33G for high-process security; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SX-2E200R6-CF5-WSM33G-WALTER Designation: SX-2E200R6-CF5 WSM33G Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM33G Chipformer: 2E200R6-CF5 Facts Material groups: S / M Suitable for: stainless steels (M) Suitable for: heat-resistant superalloys and titanium (S) Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Intended application: heavy machining of stainless steels and superalloys Benefits: optimised chip control, stable cutting edge, improved thermal resistance FAQ Which materials is this insert intended for? The SX-2E200R6-CF5 WSM33G insert is intended for stainless steels (M) and heat-resistant superalloys and titanium (S), leveraging the Tiger·tec Gold coating for improved thermal stability. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM33G grade increases wear resistance and helps maintain a sharp, stable cutting edge under elevated temperatures, supporting longer tool life and consistent machining results. Is this insert suitable for heavy-duty turning operations? Yes, the geometry and grade of the SX-2E200R6-CF5 WSM33G are optimised for heavy-duty turning, offering robust chip formation and reduced risk of built-up edge in demanding applications. How should the chipformer be matched to the application? Selection of the 2E200R6-CF5 chipformer should consider workpiece material, coolant method and toolholder rigidity; when correctly matched, the chipformer provides secure chip control and predictable process stability. Walter Tools — Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods of Walter Tools.
SX-2E260N03-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of a combination of high thermal resistance, a Tiger·tec Gold coated carbide grade and a geometry tailored for secure chip formation to keep machining processes consistent and productive. Order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. SX-2E260N03-CE4 WSM33G – Indexable turning and milling insert with Tiger·tec Gold coating by Walter Tools The SX-2E260N03-CE4 WSM33G is an indexable turning and milling insert engineered for heavy-duty machining of stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for extended tool life Designed for stainless steels and superalloys Stable cutting edge for secure chip formation Suitable for turning and milling operations Consistent performance under thermal and mechanical load The combination of Tiger·tec Gold coating and the WSM33G grade results in a coated carbide insert that resists thermal softening and maintains a robust cutting edge during long cycles. This translates into fewer tool changes and a more predictable process, which is especially beneficial in series production where machine uptime and repeatable results matter. The formulation and coating technology are optimised for materials that tend to generate heat or work-harden, improving machining stability and overall economy. Better chip control and surface quality from dedicated geometry The integral chipbreaker 2E260N03-CE4 promotes secure chip formation, reducing the risk of built-up edge and erratic chip flow that can damage workpiece surfaces or interrupt automated machining. By controlling chip shape and evacuation, the insert supports a consistent cutting zone and better contact between tool and work, which often leads to improved surface finish and reduced rework. For users less familiar with chipbreaker functions: this geometry channels and fractures chips in a controlled way, preventing long swarf and minimising heat concentration at the cutting edge. Versatile integration for turning and milling applications As an indexable insert, the SX-2E260N03-CE4 WSM33G offers quick orientation changes and compatibility with standard toolholders for both turning and milling operations, enabling rapid replacement and reduced downtime. Its suitability for stainless steels and superalloys makes it a practical choice in industries handling corrosion‑resistant parts or high‑temperature alloys, such as valve manufacturing, aerospace components or chemical processing equipment. For production environments seeking predictable tool life and simplified inventory, this insert supports consistent throughput and easier process planning. For selection assistance with Walter Tools' Tiger·tec Gold inserts and to confirm suitability for specific stainless steel or superalloy applications, contact Metav Werkzeuge for expert guidance and availability Technical Data SKU: SX-2E260N03-CE4-WSM33G-WALTER Designation: SX-2E260N03-CE4 WSM33G Product type: Indexable turning and milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM33G Chipbreaker: 2E260N03-CE4 Material groups: S, M Facts Applicable material group S (heat‑resistant superalloys, titanium) Applicable material group M (stainless steels) Coating technology: Tiger·tec Gold Insert form: indexable, multi‑edge Special features Coated carbide for thermal stability Geometry optimised for secure chip formation Suited to heavy‑duty machining Compatible with standard toolholders for turning and milling FAQ What materials is this insert designed for? The SX-2E260N03-CE4 WSM33G insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). How does Tiger·tec Gold benefit machining performance? Tiger·tec Gold coating on the WSM33G grade increases thermal resistance and edge stability, which enhances tool life and process reliability under demanding machining conditions. Is this insert suitable for both turning and milling? Yes, the indexable design of the SX-2E260N03-CE4 enables use in both turning and milling toolholders where the specified geometry and grade match the application. What role does the chipbreaker play on this insert? The 2E260N03-CE4 chipbreaker controls chip shape and evacuation to prevent long swarf and reduce built‑up edge, supporting consistent surface quality and uninterrupted machining. Can this insert improve productivity in series production? By offering predictable tool life, secure chip control and rapid indexability, the insert helps maintain steady production throughput and reduces unplanned stoppages. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
SX-3E300L6-CE4 WKP23G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating and the WKP23G grade for consistent tool life and stable cutting performance when machining steel and cast iron; order the insert through Metav Werkzeuge or consult our specialists for application-specific recommendations. SX-3E300L6-CE4 WKP23G indexable turning insert by Walter Tools — Tiger‑tec Gold, for steel and cast iron SX-3E300L6-CE4 WKP23G is an indexable turning insert designed for heavy-duty and general turning of steel (P) and cast iron (K) components, delivering high wear resistance and reliable edge stability Tiger‑tec Gold coating technology WKP23G grade for steel and cast iron Coated cemented carbide for long tool life Consistent component quality through optimised coating The combination of the Tiger‑tec Gold coating and the WKP23G grade provides a robust surface finish and consistent dimensional stability. The advanced coating reduces flank and crater wear under typical turning conditions, which translates into fewer tool changes and more reproducible parts. For operations where repeatable surface integrity matters, this coated cemented carbide insert sustains cutting performance across medium to high cutting speeds, supporting predictable production cycles. Reliable performance on steel and cast iron Designed for the machining of steel and cast iron, the insert features a geometry and chip control suited to these material families. The specified chipbreaker ensures controlled chip formation and evacuation, reducing the risk of re-cutting and improving operator safety. This technical pairing of grade and geometry benefits throughput by maintaining a stable cutting edge, especially during batch production or when short interrupted cuts are present. Practical advantages for workshop efficiency By using this insert, shops gain a measurable improvement in process stability and tool life, which helps to lower overall machining costs per component. The design focus on wear resistance and edge stability supports longer intervals between indexing or replacement, making the insert a pragmatic choice for operations prioritising uptime and consistent output quality. Application guidelines and compatibility notes are available to match cutting parameters to specific steels or cast iron grades. For tailored application advice and secure supply of the Tiger‑tec Gold SX‑3E300L6‑CE4 WKP23G insert from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for a recommendation matched to the machining task Technical Data Article number: SX-3E300L6-CE4-WKP23G-WALTER Label: Drehwendeschneidplatte SX-3E300L6-CE4 WKP23G Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Gold Grade: WKP23G Chipbreaker: 3E300L6-CE4 Manufacturer: Walter Tools Facts Application groups: P (steel), K (cast iron) Material base: Coated cemented carbide Typical use: Turning, general and heavy-duty operations Special features Coating: Tiger‑tec Gold technology Material suitability: steel and cast iron Design focus: wear resistance and stable cutting edge Geometry suited to controlled chip formation WPL designation: SX-3E300L6-CE4 WKP23G Material code: P / K FAQ What materials is this insert intended for? The SX-3E300L6-CE4 WKP23G insert from Walter Tools is intended for machining steel (P) and cast iron (K), with a grade and coating optimised for these groups. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold on the WKP23G grade reduces abrasive wear and improves thermal stability, helping the insert to maintain edge integrity for longer in Walter Tools applications. Is the chip control suitable for interrupted cuts? Yes; the 3E300L6-CE4 chipbreaker geometry supports controlled chip formation and evacuation, which is advantageous for interrupted turning and mixed cutting conditions with this Walter Tools insert. Can this insert improve overall process reliability? By combining the WKP23G grade and Tiger‑tec Gold coating, the insert contributes to longer tool life and more consistent part quality, supporting higher process reliability in turning operations. Where to get parameter recommendations for this insert? Metav Werkzeuge and Walter Tools provide cutting data recommendations specific to material grade and part geometry for the SX-3E300L6-CE4 WKP23G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-3E300L6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of a proven cutting grade and robust chip control to maintain process reliability in demanding turning operations; benefit from the Tiger‑tec Gold coating and the WSM33G grade for extended tool life and secure cutting-edge stability. Order the insert directly via Metav Werkzeuge or consult the team for recommended cutting data. SX-3E300L6-CE4 WSM33G turning indexable insert — Tiger‑tec Gold coating, for stainless steel and superalloys — Walter Tools The SX-3E300L6-CE4 WSM33G indexable insert is designed for stable turning of difficult-to-machine materials, providing reliable chip formation and a wear-resistant surface suited to stainless steels and heat‑resistant alloys. Tiger‑tec Gold coating for wear resistance Optimised 3E300L6-CE4 chipformer Suitable for stainless steel and superalloys Consistent cutting-edge stability Reliable performance in demanding materials The combination of the Tiger‑tec Gold technology and the WSM33G grade delivers a high level of thermal and mechanical resistance during turning of stainless steel and heat‑resistant alloys. The coated carbide substrate is engineered to resist crater wear and to maintain a stable cutting edge under elevated temperatures, which directly reduces the need for frequent index changes and contributes to predictable machining cycles. This results in more consistent surface quality and reduced interruption of production runs. Predictable chip control and productivity gains The 3E300L6-CE4 chipformer geometry is tailored to support reliable chip breaking and evacuation when machining sticky or work‑hardening materials. Optimised chip control minimises the risk of built-up edge and workpiece damage, improving in‑process efficiency and reducing rework. For production shops aiming to increase throughput, this insert offers a balance of process security and tool life that supports longer uninterrupted cutting times and stable dimensional results. Practical guidance and material scope The insert is specifically indicated for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), making it suitable where both heat resistance and edge stability are required. As a coated carbide grade, it is best employed with appropriately adjusted cutting speeds and feeds for the material class in question; slower speeds and higher feed in superalloys, and routine monitoring when turning austenitic stainless steels to avoid work hardening. Walter Tools’ emphasis on consistent substrate quality means the insert provides reproducible performance across batches, aiding process planning and tool inventory control. For machining stainless steels and superalloys with Tiger‑tec Gold reliability, contact Metav Werkzeuge for tailored application advice and availability of SX-3E300L6-CE4 WSM33G turning inserts Technical Data Article number: SX-3E300L6-CE4-WSM33G-WALTER ISO designation: SX-3E300L6-CE4 WSM33G Product type: Indexable insert (turning) Series: Tiger‑tec Gold Grade: WSM33G Geometry/chipformer: 3E300L6-CE4 Material group: S / M Manufacturer: Walter Tools Facts Geometry code: 3E300L6-CE4 SKU: SX-3E300L6-CE4-WSM33G-WALTER ISO material groups: M, S Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Suitable for: stainless steel (M), heat‑resistant alloys and titanium (S) Benefit: Stable cutting edge and optimised chip control Application: Difficult-to-machine materials and demanding turning operations FAQ Which materials is this insert suitable for? The SX-3E300L6-CE4 WSM33G insert from Walter Tools is intended for ISO groups M and S, covering stainless steel and heat‑resistant superalloys including titanium. What advantages does the Tiger‑tec Gold technology provide? Tiger‑tec Gold on the WSM33G grade improves thermal resistance and wear behaviour of the coated carbide, helping to maintain cutting‑edge integrity during long cutting cycles. How does the 3E300L6-CE4 chipformer affect machining? The 3E300L6-CE4 chipformer delivers predictable chip breaking and evacuation, reducing built‑up edge and improving surface finish when turning sticky or tough materials with the SX-3E300L6-CE4 WSM33G insert. Is this insert suitable for finishing and roughing? The insert’s combination of edge stability and chip control allows flexible use; geometry and cutting data should be matched to the operation (lighter cuts for finishing, robust parameters for roughing) when using the SX-3E300L6-CE4 WSM33G turning insert. Can the WSM33G grade be used for mixed material batches? Yes, the WSM33G grade is designed for a broad spectrum of difficult materials; however, cutting parameters must be adjusted when switching between stainless steels and high-temperature alloys to preserve tool life and workpiece quality. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
SX-3E300L6-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, reliable chip control and proven Tiger·tec Gold coating for efficient machining of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for cutting‑data optimisation. SX-3E300L6-CF5 WSM33G indexable turning insert — Tiger·tec Gold, for stainless steel and S materials (Walter Tools) SX-3E300L6-CF5 WSM33G is an indexable turning insert designed for demanding machining of stainless steel and heat‑resistant superalloys, offering stable cutting edges and improved process reliability. Tiger·tec Gold coating for extended tool life Optimised for stainless steel and superalloys Stable cutting edge and secure chip control Suited to demanding roughing and finishing Longer tool life through optimised coating and substrate The WSM33G grade, part of the Tiger·tec Gold series, combines a coated carbide substrate with a surface technology engineered to resist abrasive and thermal wear. This results in improved wear resistance and a longer interval between insert changes, which reduces process interruptions and lowers overall machining cost per component. For operations in stainless steel, where heat generation and built‑up edge are common issues, the chosen coating and substrate promote stable chip formation and preserve the cutting edge geometry under high stress. Consistent chip control and surface quality for critical components The integrated chipbreaker geometry 3E300L6‑CF5 is specified for secure evacuation of chips when working with sticky or heat‑retaining alloys. By controlling chip form and flow, the insert supports consistent surface finish and reduces the risk of rework. In practical terms, better chip control means fewer manual interventions and steadier cycle times — an important factor for batch production and when machining complex components from S materials such as titanium and nickel‑based superalloys. Practical shop‑floor benefits that increase productivity Adopting this insert delivers tangible operational advantages: fewer tool changes, reliable repeatability in serial runs and greater process stability when switching between roughing and finishing passes. The grade’s suitability for both stainless steel and heat‑resistant alloys simplifies tool inventory and helps maintain throughput when material mixes occur on the same production line. For best results, pair the insert with holders and clamping systems specified for indexable turning applications and apply manufacturer‑recommended cutting parameters to exploit the full potential of the geometry and coating. For tailored cutting‑data advice, application pairing or to clarify suitability for a specific component geometry, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: SX-3E300L6-CF5-WSM33G-WALTER Name: SX-3E300L6-CF5 WSM33G indexable turning insert Product type: indexable turning insert Brand: Walter Tools Core data Grade: WSM33G Chipbreaker: 3E300L6-CF5 Series: Tiger·tec Gold Material designation: S / M Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: M (stainless steel) Material suitability: S (heat‑resistant superalloys and titanium) Stable cutting edge and optimised chip control FAQ What materials is this insert suitable for? This SX-3E300L6-CF5 WSM33G insert is suitable for stainless steel (M) and for heat‑resistant superalloys and titanium (S), as indicated by the grade and series. Does the WSM33G grade improve tool life compared with standard grades? Yes, the WSM33G grade within the Tiger·tec Gold family is formulated to enhance wear resistance and maintain a stable cutting edge, which typically extends tool life in demanding applications. Which chipbreaker should be chosen for sticky materials? The 3E300L6‑CF5 chipbreaker geometry on this insert is designed to deliver secure chip formation and evacuation for sticky, heat‑retaining materials. Can this insert be used for both roughing and finishing operations? The geometry and grade allow flexibility across roughing and finishing passes, helping to reduce inventory and provide consistent results across different cut depths and feed rates. Is specific clamping or holder equipment recommended? Use a rigid, application‑appropriate indexable turning holder and follow manufacturer recommendations for seat fit and tightening to preserve insert performance and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-3E300L6-CF5 WSM43G WSM43G Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade that combines Tiger·tec Gold technology with proven edge stability for demanding materials; this insert supports efficient, predictable machining of stainless steels and heat-resistant superalloys. Order directly via Metav Werkzeuge or consult the technical team for cutting-data recommendations. SX-3E300L6-CF5 WSM43G indexable turning insert — coated Tiger·tec Gold, Walter Tools SX-3E300L6-CF5 WSM43G is an indexable turning insert designed for heavy-duty machining of stainless steels and heat-resistant superalloys, offering stable cutting edges and reliable chip control Tiger·tec Gold coated grade WSM43G Stable edge for demanding materials Designed for ISO M and S applications Compatible with standard 3E300L6 geometry High-performance grade for tough alloys and stainless steels The combination of the WSM43G grade with Tiger·tec Gold coating delivers a balance of wear resistance and thermal stability, making the insert particularly suitable for machining stainless steels and heat‑resistant superalloys (ISO groups M and S). The coated carbide composition supports secure chip formation and reduced flank wear under elevated cutting temperatures, which translates into fewer unexpected tool changes and steadier cycle times on production lines. Predictable chip control and edge stability for consistent results With a geometry based on the 3E300L6-CF5 chipbreaker concept, the insert promotes controlled chip segmentation and evacuation. This results in a lower risk of built-up edge and improved surface finish on difficult-to-cut alloys. The stable cutting edge reduces the incidence of edge chipping during interrupted cuts, supporting repeatable part tolerances and minimised rework. Productivity gains through longer tool life and process reliability The grade’s coating and substrate combination is engineered for long tool life under thermal and mechanical stress typical of M and S materials. Using this insert can reduce tooling consumption per part and increase effective spindle uptime. When integrated into proven toolholders and appropriate machining parameters, operators can expect more predictable wear patterns and a steady output quality, improving overall machining economics. Practical application notes and compatibility guidance The insert is supplied in the ISO designation SX-3E300L6-CF5 WSM43G and is compatible with holders that accept the 3E300L6 form. Cutting parameter selection should reflect workpiece alloy, hardness, and component geometry; lower cutting speeds and increased coolant flow are commonly adopted for many stainless steels, while certain superalloys may require modified feeds to avoid thermal overload. For best results, correlate insert choice with holder rigidity and machine capability before series production. For specific cutting‑data sheets, tailored toolholder recommendations or to request material‑matched machining advice for the Walter Tools SX-3E300L6-CF5 WSM43G insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a consultation. Technical data SKU: SX-3E300L6-CF5-WSM43G-WALTER Article designation: SX-3E300L6-CF5 WSM43G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Grade / series: WSM43G, Tiger·tec Gold Chipbreaker: 3E300L6-CF5 Material suitability: ISO M, ISO S Material code: S / M Special features Coated carbide grade with emphasis on heat resistance Optimised chip control for stainless and superalloys Stable cutting edge for interrupted cuts Designed for productive turning applications FAQ What materials is this insert suitable for? The SX-3E300L6-CF5 WSM43G insert from Walter Tools is formulated for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), providing improved edge stability under thermally demanding conditions. What does Tiger·tec Gold bring to the cutting process? Tiger·tec Gold coating on the WSM43G grade increases wear resistance and thermal stability, which supports longer tool life and more consistent machining when using the SX-3E300L6-CF5 insert. Which chipbreaker should be selected for fine surface finish? The 3E300L6-CF5 chipbreaker geometry of this insert balances chip control and surface quality; when a finer finish is required, adjust feed and speed within recommended ranges for the workpiece alloy. Is the insert suitable for interrupted cutting? Yes, the stable cutting edge design of the WSM43G grade is intended to resist chipping during interrupted cuts, making the SX-3E300L6-CF5 a reliable choice for applications with periodic engagement. How should cutting parameters be adapted for superalloys? For superalloys, lower cutting speeds and controlled feed rates are generally advised to limit thermal load; consult the Walter Tools grade recommendations and the Metav Werkzeuge technical team for optimised parameters for the SX-3E300L6-CF5 WSM43G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered product names are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the respective trademark owners. The offered item is an original, factory-new product of Walter Tools.
SX-3E300N02-CE4 WKP23G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WKP23G grade for consistent edge stability and reliable removal rates when machining steel and cast iron; order direct via Metav Werkzeuge or consult our team for technical matching and application advice. SX-3E300N02-CE4 WKP23G indexable turning and milling insert — Tiger·tec Gold, Walter Tools The SX-3E300N02-CE4 WKP23G is a multifunctional indexable insert intended for productive turning and milling operations on steel and cast iron, combining a coated carbide substrate with a geometry optimised for reliable chip control. Tiger·tec Gold coating for extended tool life Optimised for steel and cast iron machining Coated solid carbide for consistent edge stability Suitable for productive turning and milling Consistent productivity through coating and grade selection The combination of the Tiger·tec Gold series and the WKP23G grade delivers a robust, coated carbide that stabilises the cutting edge under thermal and mechanical load. For production-oriented shops this insert reduces flank wear and maintains cutting performance over longer tool lives, which in turn supports higher component throughput. The coating technology is designed to improve process reliability and reduce unexpected tool changes; in practice that means fewer interruptions during batch runs and a more predictable machining cycle time. Clear advantages for steel and cast iron applications Designed for ISO material groups P (steel) and K (cast iron), the geometry identified by the designation 3E300N02-CE4 promotes controlled chip formation and evacuation. The insert’s configuration supports the handling of the short, often brittle chips typical of cast iron while also withstanding the heat and adhesion risks associated with machining various steels. This focused design translates into measurable benefits: improved surface finish consistency and reduced rework, helping maintain tight tolerances in series production. Practical use and integration into existing toolpaths The plate’s familiar indexable format makes integration straightforward on standard toolholders for both turning and face milling operations. Its coated carbide construction means the insert tolerates higher cutting parameters found in modern CAM strategies, allowing for modest increases in cutting speed or feed where machine rigidity and workholding permit. When selecting cutting data, reference the Tiger·tec Gold guidelines for the WKP23G grade to balance speed, feed and depth of cut for optimal tool life and part quality. For tailored advice or to place an order for Walter Tools inserts, contact Metav Werkzeuge and request application support for the SX-3E300N02-CE4 WKP23G; our technical team is available to recommend cutting parameters and compatible holders. Technical data SKU: SX-3E300N02-CE4-WKP23G-WALTER Designation: SX-3E300N02-CE4 WKP23G Product type: indexable turning/milling insert Series: Tiger·tec Gold Grade: WKP23G Core data ISO material groups: P (steel), K (cast iron) Material: coated carbide Geometry code: 3E300N02-CE4 Special features Coating technology: Tiger·tec Gold Material suitability: steel, cast iron Intended use: productive turning and milling Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The SX-3E300N02-CE4 WKP23G is specified for ISO groups P (steel) and K (cast iron), making the insert appropriate for a broad range of steels and grey or nodular cast irons. Which series and grade does the insert belong to? This cutting insert belongs to the Tiger·tec Gold series and uses the WKP23G grade, a coated carbide developed for stable edge life and good wear resistance. How does the geometry support chip control? The geometry identified as 3E300N02-CE4 is developed to encourage controlled chip formation and evacuation, especially useful when machining brittle cast-iron chips and during higher-speed steel operations. Can the insert be used for both turning and face milling? Yes, the indexable format is compatible with standard turning and milling holders; the insert is intended for productive turning and milling tasks where coated carbide performance is required. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation purposes only and do not imply any affiliation between Metav Werkzeuge GmbH and the trademark owners. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
SX-3E300N02-CE4 WKP23S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating performance, a WKP23S coated-carbide grade and proven chip control to increase process reliability in steel and cast-iron machining; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SX-3E300N02-CE4 WKP23S turning/milling indexable insert – Tiger·tec Silver, Walter Tools The SX-3E300N02-CE4 WKP23S is a versatile turning and milling indexable insert designed for stable performance in steel and cast iron applications Tiger·tec Silver coating technology Optimised for steel and cast iron machining Coated carbide grade WKP23S for wear resistance Reliable chip control and edge stability Consistent productivity for steel and cast-iron machining The insert from the Tiger·tec Silver family provides a reliable balance of thermal stability and wear resistance, making it suitable for the typical temperature and chip-formation challenges encountered when machining steel and cast iron. The coated cemented-carbide substrate ensures a stable cutting edge, which reduces insert changes and supports continuous production runs. By focusing on measurable process gains — longer tool life and fewer interruptions — this solution contributes directly to improved throughput and reproducible component quality. Coating and substrate: what drives the performance The combination of a coated carbide substrate with the Tiger·tec Silver treatment enhances resistance to abrasive and adhesive wear while improving edge stability under variable cutting conditions. The WKP23S grade is a coated hardmetal specially developed for the P and K material classes, meaning it is formulated to handle both the heat generated with unalloyed and alloyed steels and the abrasive, often fragmented chips typical of cast-iron workpieces. For production planners, this results in a predictable tool life and consistent surface finish without complex parameter changes. Practical integration and machining benefits As an indexable solution for turning and milling operations, this insert simplifies tool management: the standardised geometry and reliable chipbreaking reduce the need for trial-and-error in process setup. The insert’s attributes support higher machining stability, fewer rejects and improved overall equipment effectiveness. When replacing conventional grades, users often observe extended service intervals and a reduction in unexpected tool-related downtime, which contributes to lower unit manufacturing costs and more consistent batch-to-batch quality. For precision machining with Walter Tools’ Tiger·tec Silver technology, contact Metav Werkzeuge for tailored advice and order support — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number / SKU: SX-3E300N02-CE4-WKP23S-WALTER Product type: Drehwendeschneidplatte / Fräswendeschneidplatte (turning/milling indexable insert) ISO designation: SX-3E300N02-CE4 WKP23S Grade: WKP23S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Applicable material groups: P (steel), K (cast iron) Material of insert: coated cemented carbide Chipbreaker / geometry: 3E300N02-CE4 Special features Coating technology: Tiger·tec Silver Main application: machining of steel and cast iron Benefits: wear resistance, chip control, stable cutting edge FAQ What materials can this insert machine effectively? The SX-3E300N02-CE4 WKP23S insert is suitable for steel (P) and cast iron (K) applications thanks to its WKP23S coated-carbide grade and Tiger·tec Silver coating. Is this insert intended for turning, milling or both? This item is specified as a turning and milling indexable insert; the geometry and chipbreaker 3E300N02-CE4 support both turning and face/milling operations depending on toolholder configuration. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP23S grade improves thermal and abrasive wear resistance, providing a more stable cutting edge and longer tool life under industrial cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SX-3E300N02-CE4 WSM23G WSM23G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WSM23G grade for extended edge life and thermal resistance in demanding materials. The insert’s defined geometry supports reliable chip control and process stability. Order the insert directly via Metav Werkzeuge or ask the consultants if needed. SX-3E300N02-CE4 WSM23G – Indexable turning/milling insert, Tiger‑tec Gold (Walter Tools) A SX-3E300N02-CE4 WSM23G indexable turning and milling insert engineered for demanding work on stainless steel and heat‑resistant superalloys. Coated carbide Tiger‑tec Gold grade WSM23G Optimised for stainless steel and superalloys Stable cutting edge for reliable chip control For turning and milling applications High-temperature stability for demanding materials The combination of the Tiger‑tec Gold technology and the WSM23G cutting grade provides improved thermal resistance and wear behaviour when machining materials that generate high temperatures. This insert is intended for the ISO groups M and S, meaning it is particularly suited to stainless steel and heat‑resistant superalloys or titanium—materials that challenge conventional grades due to their toughness and low thermal conductivity. The coated cemented carbide construction reduces notch wear and supports consistent cutting-edge performance, which helps sustain machining parameters over longer cycles and reduces the need for frequent tool changes. Secure chip control and consistent edge life A defined geometry such as the 3E300N02-CE4 chipbreaker ensures predictable chip formation and evacuation during both turning and light milling passes. Predictable chip control lowers the risk of built-up edge and improves surface finish, while the robust cutting edge preserves dimensional stability across production batches. For production environments where repeatability and reduced downtime are priorities, this insert contributes to a stable process window and fewer interruptions for insert changes or rework. Versatile use across turning and milling operations Designed as a multi‑purpose indexable insert, this component adapts to a range of toolholders and machine set‑ups for both roughing and finishing strategies. The coating and substrate combination is chosen to balance toughness and hardness, making the insert capable of handling interrupted cuts and varying feed rates without premature edge chipping. For shops working across medical, aerospace or energy sectors where a mix of stainless steel and nickel‑base alloys is common, the insert delivers a practical compromise between tool life and surface quality. Practical data to support process decisions When selecting a cutting grade, material compatibility and chipbreaker geometry are decisive. The data provided for this insert identifies the series and grade as Tiger‑tec Gold / WSM23G, with a geometry code 3E300N02-CE4 suitable for controlled chip breaking. These attributes support higher cutting temperatures and provide a stable cutting edge, enabling consistent component tolerances and improved tool life. For specific machining parameters, application advice and verification against machine capabilities are recommended; Metav Werkzeuge can supply further technical guidance and tailored recommendations for feed and speed settings. For process-critical applications on stainless steel and superalloys, contact Metav Werkzeuge to source the Walter Tools SX-3E300N02-CE4 WSM23G insert and to discuss the optimal geometry and cutting parameters for the application. Technical Data Article number: SX-3E300N02-CE4-WSM23G-WALTER Product: Indexable turning/milling insert Series: Tiger‑tec Gold Grade: WSM23G Facts ISO material groups: M, S Suitable materials: stainless steel; superalloys / titanium Special features Coated cemented carbide Chipbreaker geometry: 3E300N02-CE4 Application: turning and milling FAQ What materials is this insert suitable for? The SX-3E300N02-CE4 WSM23G insert is specified for ISO groups M and S, making it suitable for stainless steel and heat‑resistant superalloys (including certain titanium grades). Which series and grade does the insert belong to? This indexable insert is part of the Tiger‑tec Gold series and uses the WSM23G coated carbide grade for enhanced thermal resistance and edge stability. What is the chipbreaker geometry and why does it matter? The chipbreaker code 3E300N02-CE4 denotes the designed geometry for controlled chip formation; this supports consistent chip evacuation and improved surface quality in both turning and milling operations. Can the insert be used for both roughing and finishing? Yes, the combination of substrate and coating delivers a balance of toughness and hardness suitable for a range of cutting conditions, allowing use in both roughing and finishing strategies depending on the chosen parameters. How does this insert support production reliability? The coated carbide construction and grade selection promote a stable cutting edge and predictable wear behaviour, which helps maintain process windows and reduces insert changes during production. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer. The Walter brand is used here to describe the manufacturer of the listed insert.
SX-3E300N02-CE4 WSM23S WSM23S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and the WSM23S grade for secure chip formation and stable cutting edges when machining stainless steels and heat‑resistant alloys; order the SX-3E300N02-CE4 WSM23S via Metav Werkzeuge or consult specialist advisors for tailored cutting data and application support. SX-3E300N02-CE4 WSM23S – turning/milling insert, Tiger·tec Silver (Walter Tools) The SX-3E300N02-CE4 WSM23S is a versatile turning and milling indexable insert designed for reliable chip control and extended tool life when machining stainless steels and high‑temperature alloys. Tiger·tec Silver coating for extended tool life WSM23S grade for stainless steel and superalloys Optimised chip control for stable metal removal Consistent performance on stainless steels and superalloys The combination of the WSM23S carbide grade and the Tiger·tec Silver coating delivers a balance of heat resistance and edge strength that is particularly suitable for machining stainless steel and superalloys. These materials tend to soften at the cutting zone and can cause built‑up edge; the coating reduces friction and thermal loading, while the grade preserves a stable cutting edge. For less experienced purchasers, this means fewer interrupted cycles and a more predictable production output — the insert's composition supports steady component quality even under demanding temperature conditions. Efficient chip control and reduced process interruptions The proprietary chipbreaker geometry 3E300N02-CE4 has been engineered to promote controlled chip segmentation and evacuation during both turning and milling operations. Controlled chips reduce the risk of workpiece surface damage and tool knock‑outs, which in turn lowers scrap rates and machine downtime. By providing a predictable chip form, the insert helps maintain machining rhythm and improves overall process efficiency; in practice this results in fewer tool changes and a reduction in secondary handling, benefiting throughput and shop‑floor ergonomics. Application focus and practical benefits for production Designed for heavy and medium cutting conditions, this indexable insert supports applications where durability and repeatability matter most. The WSM23S grade is tuned to resist the mechanical and thermal loads typical of titanium and nickel‑based alloys, as well as a variety of stainless steels. For engineers seeking straightforward integration, the insert functions as a drop‑in solution for established tool holders and cutter bodies, delivering reliable surface finish and consistent tool life. Technical teams will appreciate the reduced need for frequent tool requalification and the predictability this brings to batch production. For machining strategies that demand thermal stability and dependable chip control, contact Metav Werkzeuge to specify the Walter Tools SX-3E300N02-CE4 WSM23S for the intended operation or request tailored cutting parameters via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SX-3E300N02-CE4-WSM23S-WALTER Product type: turning/milling indexable insert Grade: WSM23S Series: Tiger·tec Silver Chipbreaker: 3E300N02-CE4 Manufacturer: Walter Tools Material group: S / M Key specifications Suitable for: stainless steel (M) Suitable for: heat‑resistant superalloys and titanium (S) Coated cemented carbide grade Geometry optimised for chip control Features and applications Coating technology: Tiger·tec Silver Application: turning and milling operations Target use: secure chip formation, stable cutting edge Designed for repetitive production and demanding alloys FAQ What materials is this insert suitable for? The SX-3E300N02-CE4 WSM23S insert from Walter Tools is suitable for stainless steel and heat‑resistant superalloys and titanium, corresponding to the S and M ISO material groups. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating reduces friction and improves thermal resistance, which helps the WSM23S grade maintain a stable cutting edge and extend tool life under higher temperatures. Which chipbreaker is used and what benefit does it provide? The insert uses the 3E300N02-CE4 chipbreaker geometry, which promotes controlled chip segmentation and reliable evacuation to reduce surface damage and machine interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-3E300N02-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM33G grade and proven chip control to increase throughput in demanding materials; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SX-3E300N02-CE4 WSM33G — Turning and Milling Indexable Insert (Tiger‑tec Gold) by Walter Tools — for rostfreier Stahl and superalloys The SX-3E300N02-CE4 WSM33G is an indexable insert engineered for productive machining of rostfreier Stahl and heat‑resistant superalloys, combining a wear‑resistant coating with a geometry tailored for stable cutting performance Tiger‑tec Gold coating for long tool life Optimised chip control in tough alloys Stable cutting edge for heavy cuts Suited for rostfreier Stahl and superalloys Higher productivity through a coated carbide grade designed for demanding materials The combination of the Tiger·tec Gold coating with a high‑performance carbide base provides tangible benefits in cycle time and tool life. The WSM33G grade is a coated carbide specifically developed for materials that generate heat and tend to work‑harden, such as rostfreier Stahl and nickel‑based alloys. The surface treatment reduces flank wear and improves thermal resistance, which supports longer uninterrupted cuts and fewer tool changes — a clear efficiency gain on production lines. Consistent chip control and a stable cutting edge reduce process variability A geometry optimised for chip formation, signalled by the chipbreaker code 3E300N02‑CE4, promotes predictable chip flow and helps prevent built‑up edge when machining sticky or heat‑prone materials. The result is a stable cutting edge and fewer quality deviations in component surfaces. For shops that prioritise repeatability, this insert supports improved first‑pass yields and reduced rework, contributing directly to lower unit costs and higher throughput. Broad material compatibility and straightforward integration into existing tool systems This insert is suitable for the ISO material groups M and S, meaning it addresses rostfreier Stahl and heat‑resistant superalloys/titanium with a single grade, simplifying tooling inventories. The insert integrates with standard indexable‑insert tool holders and requires no special machine adaptations; only cutting parameters need optimisation. Clear selection by ISO group allows machinists and process engineers to match cutting data confidently and obtain consistent results across a range of demanding applications. For tailored cutting data or application support with Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a consultation with our technical advisers Technical data Article number: SX-3E300N02-CE4-WSM33G-WALTER SKU: SX-3E300N02-CE4-WSM33G-WALTER Label: Drehwendeschneidplatte / Fräswendeschneidplatte SX-3E300N02-CE4 WSM33G Walter Tools Series: Tiger‑tec Gold Grade: WSM33G Chipbreaker / geometry code: 3E300N02-CE4 Material base: S / M Manufacturer: Walter Tools Facts ISO material groups: M, S Intended use: rostfreier Stahl; heat‑resistant superalloys / titanium Product type: Turning and milling indexable insert Special features Coating technology: Tiger·tec Gold Carbide type: coated carbide Key benefits: improved wear resistance, stable cutting edge, optimised chip control Typical applications: heavy roughing and demanding finishing in difficult‑to‑machine alloys FAQ What materials is this insert suitable for? The SX-3E300N02-CE4 WSM33G insert is designed for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and abrasion resistance for these challenging materials. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WSM33G grade increases wear resistance and heat tolerance, which extends tool life and maintains a stable cutting edge under high thermal loads. Can this insert be used in both turning and milling operations? Yes — the insert is a turning and milling indexable insert and, depending on the chosen holder and cutting data, can be deployed in both turning and face‑milling applications where the geometry fits. What is the meaning of the chipbreaker code 3E300N02‑CE4? The code denotes the designed chip‑forming geometry that promotes controlled chip flow and reduces the risk of built‑up edge when machining sticky or work‑hardening materials. Where can one get application support or recommended cutting data? Metav Werkzeuge provides technical advice and application support for Walter Tools inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for cutting‑parameter recommendations. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-3E300N02-CE4 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WSM33S grade for stable cutting edges when machining rostfreier Stahl and heat-resistant alloys; order directly via Metav Werkzeuge or consult the team for process-adapted recommendations. SX-3E300N02-CE4 WSM33S indexable insert by Walter Tools — coated carbide with Tiger·tec Silver for high thermal resistance SX-3E300N02-CE4 WSM33S is an indexable turning and milling insert designed for demanding applications in stainless and heat-resistant alloys, optimised for stable chip formation and long tool life Tiger·tec Silver coating for heat resistance Optimised for rostfreier Stahl and superalloys Coated carbide grade WSM33S for stable edges Reliable cutting performance for high-temperature materials The combination of the Tiger·tec Silver coating and the WSM33S grade delivers a balance of thermal resistance and wear protection that is vital when machining materials that generate high cutting temperatures. The coating reduces adhesion and preserves the edge, which in turn supports consistent surface quality and longer intervals between index changes. As a coated carbide insert manufactured for turning and milling operations, the design focuses on securing stable chip formation, minimising the risk of built-up edge on rostfreier Stahl and on superalloys. This results in fewer interruptions in production and a measurable improvement in process reliability. Designed to improve process security and surface finish An indexable insert with the 3E300N02-CE4 chipbreaker geometry provides controlled chip flow and predictable cutting behaviour. The geometry has been engineered to support a steady shear plane and efficient evacuation of chips, which benefits both roughing and finishing operations. By choosing this insert, workshops achieve higher process security and a more uniform surface finish, reducing downstream rework. The material specification (coated carbide) suits high thermal loads and abrasive conditions, so production runs on demanding components can be planned with greater confidence and fewer tool-change disruptions. Clear specification and practical benefits for workshop planning The grade WSM33S denotes Walter’s coated carbide solution for tough-to-machine metals; it is particularly recommended for rostfreier Stahl (stainless) and for nickel- and cobalt-based superalloys and titanium alloys. The SX-3E300N02-CE4 designation identifies the insert geometry and chipbreaker intended for stable cutting under heavy thermal loading. For production managers and process engineers, the main advantages are improved tool life, repeatable machining results and reduced cycle variability. When combined with appropriate cutting data and cooling strategy, this insert supports efficient, repeatable metal removal and predictable maintenance intervals, contributing directly to overall equipment effectiveness. For robust machining of rostfreier Stahl and superalloys select the Walter Tools Tiger·tec Silver SX-3E300N02-CE4 WSM33S insert — contact Metav Werkzeuge for application advice or to request technical data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SX-3E300N02-CE4-WSM33S-WALTER Designation: SX-3E300N02-CE4 WSM33S Series: Tiger·tec Silver Core data Grade: WSM33S Chipbreaker: 3E300N02-CE4 Material class: S / M Application groups: M, S Special features Coating: Tiger·tec Silver Substrate: coated carbide Suitable for: rostfreier Stahl Suitable for: heat-resistant superalloys and titanium Application: turning and milling indexable insert for demanding materials FAQ What materials is this insert suitable for? The SX-3E300N02-CE4 WSM33S insert is formulated for rostfreier Stahl and for heat-resistant superalloys and titanium, reflecting the grade’s focus on thermal and edge stability. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating enhances thermal resistance and reduces adhesion on the cutting edge, which helps the WSM33S grade maintain a stable edge and deliver consistent surface quality under elevated temperatures. What does the chipbreaker code 3E300N02-CE4 indicate? The code denotes the chipbreaker geometry and edge preparation designed to secure predictable chip formation and efficient evacuation during both roughing and finishing operations. Manufacturer: Walter Tools; Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-3E300N02-CE4 WSM43G WSM43G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WSM43G grade for heat resistance and stable chip formation; these properties deliver reliable cutting-edge performance in demanding applications — order directly via Metav Werkzeuge or consult our specialists for application advice. SX-3E300N02-CE4 WSM43G Turning/Milling indexable insert for rostfreier Stahl and superalloys — Walter Tools A Walter Tools SX-3E300N02-CE4 WSM43G insert engineered for heavy-duty turning and milling where thermal resistance and consistent chip control are critical Tiger·tec Gold coating for heat resistance WSM43G grade for tough materials Optimised chip control with 3E300N02-CE4 Suitable for rostfreier Stahl and superalloys Improve cycle times with a heat-resistant coating and stable cutting edge The combination of the Tiger·tec Gold coating and a coated carbide substrate provides increased thermal endurance and abrasive resistance, enabling higher cutting parameters in many operations. This results in shorter cycle times and improved process efficiency without compromising tool life. The insert's design supports a consistently stable cutting edge, which reduces the risk of unexpected tool failure and helps maintain production continuity. By choosing a grade developed for thermal stability, shops benefit from fewer interruptions and more predictable machining rhythms. Secure chip control and reduced built-up edge in rostfreier Stahl Designed for ISO material groups M and S, the WSM43G grade ensures dependable chip formation when machining rostfreier Stahl and heat-resistant alloys. Materials in group M tend to form built-up edge due to ductility and heat generation; the specialised grade and chipbreaker geometry help avoid this by promoting controlled fragmentation and evacuation. The result is improved surface integrity and lower rework rates. For operators less familiar with ISO groups, M indicates rostfreier Stahl and S covers superalloys and titanium‑type alloys, so the selection matches challenging workpiece materials. Fewer tool changes and consistent surface finish through optimised geometry The 3E300N02-CE4 chipbreaker and the insert geometry are tuned to deliver repeatable contact conditions and effective coolant interaction where applicable. This leads to a more uniform surface finish and predictable wear patterns, which in turn reduce the frequency of indexings and tool replacements. The overall benefit is enhanced machine uptime and a steadier quality output, making the insert a practical choice for production environments that prioritise consistency and throughput. Backed by the engineering behind Walter Tools, the component supports systematic productivity gains. Contact Metav Werkzeuge for availability and application recommendations on Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data SKU: SX-3E300N02-CE4-WSM43G-WALTER Designation: SX-3E300N02-CE4 WSM43G Product type: Turning/Milling indexable insert Series: Tiger·tec Gold Grade: WSM43G Chipbreaker: 3E300N02-CE4 Material classification: S / M Facts ISO material groups: M, S Suitable for rostfreier Stahl (M) Suitable for heat-resistant superalloys and titanium-type alloys (S) Special features Coating: Tiger·tec Gold (coated carbide) Optimised chip control: 3E300N02-CE4 Manufacturer: Walter Tools FAQ Is this insert suitable for rostfreier Stahl? Yes. The SX-3E300N02-CE4 WSM43G insert from Walter Tools is specifically engineered for rostfreier Stahl (ISO group M), offering chip control and reduced built-up edge. Can the same grade be used on superalloys and titanium? The WSM43G grade is applicable to ISO group S materials; depending on component geometry and cutting data, the insert supports machining of heat-resistant superalloys and titanium-type alloys. What does the 3E300N02-CE4 chipbreaker do? The 3E300N02-CE4 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of chip-related interruptions when using the Walter Tools insert. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold provides thermal and abrasive resistance, enabling more stable cutting edges and higher productivity in demanding applications where heat and wear are critical factors. Is the insert suitable for high-volume production? Yes. The combination of a robust WSM43G grade, Tiger·tec Gold coating and optimised geometry supports predictable wear and fewer tool interventions, which is advantageous for high-volume runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
SX-3E300N02-CF5 WSM23G WSM23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM23G grade and optimised chip control for reliable machining of demanding materials; order directly via Metav Werkzeuge or consult their specialists for application advice. SX-3E300N02-CF5 WSM23G — Indexable turning and milling insert, Tiger·tec Gold coating (Walter Tools) The SX-3E300N02-CF5 WSM23G is an indexable turning and milling insert engineered for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys, combining a coated carbide grade with an effective chipbreaker geometry. Tiger·tec Gold coating for extended tool life Grade WSM23G for stainless steel and superalloys Stable cutting edge for consistent surface finish Optimised chip formation for heavy-duty cutting High-performance coating and grade for prolonged productivity The combination of the Tiger·tec Gold coating and the WSM23G carbide grade delivers improved wear resistance and thermal stability compared with standard inserts. This results in longer tool life and fewer tool changes, which contributes to a steadier production flow and reduced machine downtime. The coated carbide construction supports a stable cutting edge, helping to maintain consistent dimensional accuracy and surface quality during extended turning and milling cycles. Purpose-driven geometry for reliable chip control The chipbreaker designation 3E300N02-CF5 is designed to control chip formation under the high heat and material adhesion tendencies typical of rostfreier Stahl and superalloys. Controlled chip evacuation reduces the risk of built-up edge and improves surface finish, while the geometry supports higher feed rates where process stability is required. The insert’s design therefore helps to reduce unplanned stoppages and contributes to predictable cycle times in production environments. Material suitability and application benefits explained Assigned to ISO material groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium), the insert is suited for operations where thermal loads and material toughness place heavy demands on the cutting edge. The coated grade supports machining strategies that favour steady metal removal and improved tool life. For manufacturers seeking consistent component quality in demanding alloys, the insert provides a balance of chip control and edge durability that can improve first‑pass yield and overall machining economy. For tailored application support or to confirm suitability for a specific component material, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — and request advice on Walter Tools inserts and compatible toolholders. Technical data Article number: SX-3E300N02-CF5-WSM23G-WALTER Designation: SX-3E300N02-CF5 Full designation: SX-3E300N02-CF5 WSM23G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM23G Chipbreaker: 3E300N02-CF5 Facts Material groups: S / M Suitable for rostfreier Stahl: yes Suitable for superalloys and titanium: yes Product type: Turning and milling insert (indexable) Special features Coating: Tiger·tec Gold (coated carbide) Application focus: Heavy‑duty machining, high thermal load materials Benefits: Stable cutting edge, optimised chip formation, extended tool life FAQ Which materials is this insert designed for? The SX-3E300N02-CF5 WSM23G is specified for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and good chip control for these materials. What does the WSM23G grade indicate? WSM23G denotes a coated carbide grade within the Tiger·tec Gold family; it is formulated for wear resistance and edge stability when machining demanding alloys under elevated temperatures. How does the 3E300N02-CF5 chipbreaker affect machining? The 3E300N02-CF5 geometry promotes controlled chip formation and evacuation, reducing built‑up edge and improving surface finish in continuous cutting of tough materials. Is this insert suitable for finishing and roughing operations? The coated grade and chip control properties make the insert adaptable to both high‑feed roughing and moderate finishing, depending on cutting data and insert geometry selection. Can this insert help to reduce downtime in production? Yes; the combination of coating, grade and chipbreaker is intended to increase tool life and process stability, which supports fewer tool changes and more uninterrupted production. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
SX-3E300N02-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Gold coating, the WSM33G carbide grade and a dedicated chipbreaker for reliable machining of stainless steel and heat‑resistant superalloys; order the insert directly via Metav Werkzeuge or consult our specialists for the optimal cutting geometry. Indexable turning/milling insert SX-3E300N02-CF5 WSM33G – Tiger·tec Gold for stainless steel and superalloys | Walter Tools The SX-3E300N02-CF5 WSM33G is a coated carbide indexable insert from the Tiger·tec Gold series, designed for robust performance when machining stainless steel and high‑temperature superalloys. Tiger·tec Gold coating technology WSM33G coated carbide grade Optimised for stainless steel and superalloys Longer tool life through advanced coating and grade The combination of the WSM33G grade and the Tiger·tec Gold coating increases wear resistance and thermal stability, which translates directly into fewer indexings and longer productive tool life. Coated carbide reduces adhesive wear and helps maintain a reliable cutting edge under elevated temperatures typical for stainless steel and nickel‑based alloys. For production environments this means reduced tool changes and lower process interruptions, supporting a smoother machining flow and predictable cycle times. Stable chip formation for difficult‑to‑cut materials Materials in the ISO M and S groups are challenging: stainless steel tends to form built‑up edge while superalloys generate high temperatures and poor heat dissipation. The insert’s chipbreaker geometry 3E300N02‑CF5 is engineered for consistent chip control and stable cut evacuation in such conditions. Improved chip formation reduces rework risk and minimises surface damage on workpieces, ensuring reproducible results in both turning and milling operations with appropriate holder geometries. Consistent process security and repeatable performance A stable cutting edge and a coated, wear‑resistant substrate deliver process security in serial machining. This insert supports repeatable dimensional accuracy and surface integrity across batches, helping to meet quality tolerances reliably. Walter Tools’ manufacturing and quality standards contribute to predictable tool behaviour under industrial loads, which enhances throughput and reduces scrap rates in high‑mix or high‑volume production. Practical integration: selection and handling guidance Integration into an existing toolchain is straightforward: match the insert to the correct holder type and select feeds and speeds that account for workpiece material and coolant strategy. When machining stainless steel, favour moderate cutting speeds with adequate coolant and ensure rigid clamping to prevent vibration. For superalloys, focus on heat management and small, consistent passes. For fine tuning of holder geometry or to confirm the optimal insert variant, consult the technical advisors at Metav Werkzeuge for tailored recommendations. Contact Metav Werkzeuge today to specify the optimal SX-3E300N02-CF5 WSM33G insert configuration for stainless steel or superalloy applications and receive individual technical guidance from our specialists Technical Data SKU: SX-3E300N02-CF5-WSM33G-WALTER Article label: Drehwendeschneidplatte / Fräswendeschneidplatte SX-3E300N02-CF5 WSM33G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM33G Geometry / chipbreaker: 3E300N02-CF5 Material group suitability: S / M Facts UID: SX-3E300N02-CF5-WSM33G-WALTER ISO designation: SX-3E300N02-CF5 WSM33G Material classification: coated carbide Special features Coated cemented carbide grade Tiger·tec Gold coating technology Optimised for stainless steel (ISO M) Suitable for heat‑resistant superalloys and titanium (ISO S) Dedicated chipbreaker for stable chip formation FAQ What materials is this insert suitable for? The SX-3E300N02-CF5 WSM33G insert is designed for stainless steel (ISO M) and heat‑resistant superalloys/titanium (ISO S), where its coating and grade provide thermal and wear resistance. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold increases surface hardness and thermal stability; with the WSM33G substrate this reduces wear and supports a longer edge life for inserts used on demanding materials. What role does the 3E300N02‑CF5 chipbreaker play? The 3E300N02‑CF5 geometry promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of workpiece damage during heavy or interrupted cuts. Is this insert compatible with standard indexable holders? Compatibility depends on the holder seat and clamping system; the SX-3E300N02-CF5 WSM33G insert fits holders designed for its ISO designation—confirm holder type and clamping specifications before ordering. When is it recommended to consult technical sales? For high‑volume production, unusual alloys, or when optimising cycle time and tool life, consulting Metav Werkzeuge for tailored speeds, feeds and holder recommendations is recommended. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
SX-3E300N02-CF5 WSM33S WSM33S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM33S grade for reliable machining of demanding alloys; the combination of thermal stability and an optimised chipbreaker keeps cycle times steady and reduces unplanned tool changes. Order the insert directly via Metav Werkzeuge or ask the consultants for cutting data and suitability. SX-3E300N02-CF5 WSM33S — Indexable turning / milling insert, Tiger·tec Silver, Walter Tools SX-3E300N02-CF5 WSM33S is a dual-purpose indexable insert engineered for machining rostfreier Stahl and heat-resistant superalloys in demanding production environments. Tiger·tec Silver coating for higher process stability Optimised CF5 chipbreaker for secure chip control Suited for rostfreier Stahl and superalloys Robust edge for consistent performance under heat Improved process reliability with advanced coating The Tiger·tec Silver surface treatment is designed to raise the thermal and mechanical endurance of the cutting edge. In practice, this means fewer edge failures when machining materials that generate high cutting temperatures. The deposited coating reduces friction and helps maintain a stable cutting geometry, which translates into more predictable wear behaviour and less frequent insert changes. For operations that prioritise uptime, the elevated thermal resistance supports continuous runs on tough alloys without sacrificing surface quality. Chip control and surface consistency for productive machining The CF5 chipbreaker geometry promotes controlled chip formation even in sticky or work-hardening materials. By managing chip flow and breakage, the insert reduces the risk of entanglement and tool marks, improving the first-pass yield. Stable chip evacuation combined with the insert’s sturdy rake and clearance geometry helps to preserve the cutting edge stability, thereby supporting consistent component tolerances and reducing manual rework. This contributes directly to improved overall equipment effectiveness (OEE) on shop-floor turning and milling tasks. Designed for rostfreier Stahl and superalloys — clear advantages The grade WSM33S targets materials that are traditionally challenging: rostfreier Stahl and heat-resistant superalloys. These materials tend to generate high temperatures and strain the cutting edge; the combination of the Tiger·tec Silver coating and the insert’s substrate composition enhances resistance to thermal softening and adhesive wear. The result is a combination of secure chip control and extended edge life, which suits both semi-finishing and heavier cuts where tool reliability is crucial. Practical machining guidance and expected outcomes When paired with stable toolholding and appropriate cutting parameters, the insert delivers reduced thermal impact and improved surface finishes, particularly in operations sensitive to built-up edge or material smearing. The optimised chip control lowers the likelihood of re-cutting chips and reduces downtime for chip clearing. For production engineers, this insert offers a balance between productivity and reliability: the expected outcome is fewer interruptions, more consistent part quality and a clearer schedule for insert changes. Contact Metav Werkzeuge for tailored cutting data and local availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SX-3E300N02-CF5-WSM33S-WALTER ISO designation: SX-3E300N02-CF5 WSM33S Series: Tiger·tec Silver Grade: WSM33S Facts Chipbreaker: 3E300N02-CF5 Applicable material groups: S / M Product type: Indexable turning / milling insert Special features Coating: Tiger·tec Silver Optimised for rostfreier Stahl and superalloys Brand: Walter Tools FAQ What materials is this insert best suited for? The SX-3E300N02-CF5 WSM33S insert is formulated for rostfreier Stahl and heat-resistant superalloys, with the coating and geometry tuned for those groups. How does the CF5 chipbreaker affect machining? The CF5 chipbreaker promotes short, controlled chips and steady chip evacuation, reducing risks of entanglement and improving finish on difficult-to-machine materials. Can this insert be used for both turning and milling operations? Yes, the insert is specified as a turning and milling indexable insert and delivers benefits in both machining modes when matched to suitable holders and parameters. What production advantages can be expected from the Tiger·tec Silver series? Increased thermal resistance and reduced friction from the Tiger·tec Silver coating lead to longer edge life and fewer unplanned tool changes, supporting more stable production runs. Is the insert recommended for finishing cuts on rostfreier Stahl? The grade and chipbreaker provide options for semi-finishing and finishing; choosing the correct geometry and cutting data will help achieve the desired surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-3E300N02-CF5 WSM43G WSM43G Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature resistance, stable chip formation, and the Tiger·tec Gold coating for reliable machining of demanding alloys; benefit from predictable tool life and consistent performance in stainless and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. SX-3E300N02-CF5 WSM43G turning and milling indexable insert by Walter Tools — Tiger·tec Gold coated, chipbreaker CF5 SX-3E300N02-CF5 WSM43G is a coated indexable insert engineered for heavy-duty machining of stainless steel and heat‑resistant superalloys in demanding production environments Tiger·tec Gold coated grade WSM43G Optimised for stainless and superalloys Chipbreaker 3E300N02-CF5 for stable chips Manufactured by Walter Tools Maximised reliability for demanding materials The WSM43G grade, part of the Tiger·tec Gold family, is a coated carbide solution formulated for machining stainless steel and high‑temperature superalloys. Its coating and substrate combination improves thermal resistance and reduces edge wear when cutting materials that tend to work‑harden or generate high cutting temperatures. The result is stable chip formation and fewer interruptions for tool changes, which supports continuous production and lowers overall machining costs. For workshops facing frequent stainless or nickel‑base alloy jobs, this insert provides tangible gains in process stability. Predictable cutting performance and chip control Equipped with chipbreaker 3E300N02‑CF5, the insert promotes controlled chip segmentation and evacuation, reducing the risk of built‑up edge and component damage. The geometry is designed to work in conditions where chips are typically stringy or thermally aggressive, turning an otherwise delicate operation into a reproducible process. Clear chip control means less manual intervention, improved surface quality and more consistent cycle times — advantages that translate directly into higher throughput and fewer non‑conforming parts. Application guidance and process security This grade is intended for ISO groups M and S — specifically for stainless steel and heat‑resistant/titanium alloys where hardness and thermal load demand a robust cutting grade. Selection of the correct holder geometry and cutting data remains essential: the insert’s coating supports higher cutting temperatures, but matching cutting speeds, feeds and coolant strategy to the workpiece material ensures optimal life and surface finish. For further specification details or process optimisation, Metav Werkzeuge can provide tailored advice and cutting data recommendations. Discuss machining requirements with Metav Werkzeuge to exploit the Walter Tools Tiger·tec Gold WSM43G advantage for stable, productive stainless and superalloy turning and milling Technical Data SKU: SX-3E300N02-CF5-WSM43G-WALTER Product designation: Turning and milling indexable insert SX-3E300N02-CF5 WSM43G Walter Tools Grade: WSM43G Series: Tiger·tec Gold Core Data Chipbreaker: 3E300N02-CF5 Material groups: S / M Suitable for: stainless steel (M), superalloys/titanium (S) UID: SX-3E300N02-CF5-WSM43G-WALTER Special features Coated carbide grade designed for heat resistance and edge stability Optimised for stable chip formation in challenging materials Part of Walter Tools Tiger·tec Gold range Application focus: ISO group M and S materials FAQ What materials is this insert suitable for? The SX-3E300N02-CF5 WSM43G insert is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering enhanced thermal resistance and edge stability. How does the chipbreaker affect machining? The 3E300N02‑CF5 chipbreaker promotes controlled chip segmentation and consistent evacuation, which reduces built‑up edge formation and helps achieve uniform surface quality with fewer interruptions. Is WSM43G a coated or uncoated grade? WSM43G is a coated carbide grade from the Tiger·tec Gold series, combining a wear‑resistant substrate with a high‑performance coating to improve life when machining demanding alloys. Can this insert be used for both turning and milling? The designation indicates suitability for both turning and milling indexable applications; correct holder selection and cutting parameters are essential to exploit the insert’s properties. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; no connection between our company and the named brands is implied. The offered item is original and supplied new from the manufacturer (Walter Tools).
SX-3E300N02-CF5 WSM43S WSM43S Wendeplatten - Walter Tools
Take advantage of reliable edge stability, Tiger·tec Silver wear resistance and optimised chip control to maintain uninterrupted production when machining stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting parameters and batch supply. SX-3E300N02-CF5 WSM43S – Indexable insert for turning and milling (stainless steels, superalloys) by Walter Tools The SX-3E300N02-CF5 WSM43S is an indexable turning and milling insert designed for secure chip formation and long tool life in demanding materials such as stainless steels and high‑temperature superalloys. Tiger·tec Silver coating for high wear resistance WSM43S grade for stainless steels and superalloys Coated carbide for stable cutting edges Optimised chip control for predictable chips Consistent performance in difficult‑to‑machine materials The WSM43S grade, developed within the Tiger·tec Silver range, combines a wear‑resistant coating with a robust carbide substrate to tackle materials that generate heat and tend to work‑harden. The result is stable cutting edges and reduced flank wear, which directly improves process reliability and reduces unplanned tool changes. For production environments where predictable tool life is critical, this insert supports higher cutting speeds while maintaining dimensional consistency. Predictable chip formation and improved surface quality Equipped with the 3E300N02‑CF5 chipbreaker geometry, this insert promotes controlled chip breaking and evacuation, lowering the risk of built‑up edge and edge deformation. Chip control is essential when machining stainless steels, which can form stringy chips; the optimised geometry converts uncontrolled swarf into short, manageable segments, improving surface finish and reducing cycle interruptions. Clear chip flow also simplifies coolant application and workpiece handling at the machine. Flexibility across turning and milling tasks The insert’s design accommodates both turning and face‑milling operations, making it suitable for mixed production cells where tool consolidation is an advantage. Compliance with ISO material group codes M (stainless steels) and S (heat‑resistant alloys, titanium) means the grade has been selected for its thermal resistance and edge stability. For workshops that switch between component families, the insert delivers reliable cutting behaviour without frequent requalification of toolpaths. Economic benefits through longer life and stable processes By combining a coated carbide substrate with a wear‑optimised grade, the insert reduces frequency of index changes and regrinding, contributing to lower tooling costs per part. The enhanced abrasion resistance extends service intervals, while consistent cutting behaviour reduces scrap and rework. In short production runs or high‑volume batches, these improvements translate into measurable productivity gains and a more predictable manufacturing flow. For high‑process reliability with Walter Tools inserts such as the SX-3E300N02-CF5 WSM43S, contact Metav Werkzeuge for cutting data sheets, availability and application advice. Technical data Article number: SX-3E300N02-CF5-WSM43S-WALTER Article designation: SX-3E300N02-CF5 WSM43S Manufacturer: Walter Tools Product type: Indexable insert for turning and milling Facts Series: Tiger·tec Silver Grade: WSM43S Chipbreaker: 3E300N02‑CF5 Material groups: S / M Special features Coated carbide Optimised chip control geometry Suited for stainless steels and heat‑resistant superalloys Stable cutting edge for demanding applications FAQ What materials is this insert intended for? The SX‑3E300N02‑CF5 WSM43S insert from Walter Tools is intended for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and edge integrity in those materials. Which series and coating technology does the grade use? The insert uses the Tiger·tec Silver series technology; the WSM43S grade is a coated carbide composition designed to balance wear resistance and toughness. What is the function of the 3E300N02‑CF5 chipbreaker? The 3E300N02‑CF5 chipbreaker geometry ensures predictable chip formation, converting long, stringy chips into short segments to improve evacuation, surface finish and machine uptime. Can this insert be used for both turning and milling operations? Yes, the SX‑3E300N02‑CF5 WSM43S is specified as an indexable insert suitable for both turning and milling applications where the geometry and holder accommodate the operation. How does the grade contribute to process stability? By combining a wear‑resistant coating with a tough carbide substrate, the WSM43S grade enhances edge stability, reduces flank wear and supports higher productivity with fewer unexpected index changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is original and brand‑new.
SX-3E300N02-CF6 WSM33G WSM33G Wendeplatten - Walter Tools
Taking advantage of a coated carbide grade from the Tiger·tec Gold family combined with a dedicated chipbreaker 3E300N02-CF6, this indexable insert delivers stable cutting edges and consistent chip control when machining demanding alloys. Order the insert through Metav Werkzeuge or consult their specialists for application advice. SX-3E300N02-CF6 WSM33G — Turning / milling indexable insert by Walter Tools (Tiger·tec Gold, CF6 chipbreaker) A SX-3E300N02-CF6 WSM33G indexable insert engineered for high-temperature resistance and secure chip formation when machining stainless steels and heat-resistant superalloys Tiger·tec Gold coating for elevated heat resistance Coated carbide for improved edge stability Optimised chip control with CF6 geometry Suitable for rostfreier Stahl and superalloys Faster, more predictable machining of hard-to-cut materials The combination of the Tiger·tec Gold technology and a coated carbide substrate provides a clear performance advantage when working with demanding materials. The grade WSM33G is specifically developed for materials in ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium), where temperature and adhesion can shorten tool life. The designated chipbreaker 3E300N02-CF6 promotes stable chip formation and evacuation, reducing interruptions for chip clearing and thus increasing process throughput. This results in fewer unexpected stops and more predictable cycle times on turning and milling operations. Improved process reliability and extended tool life A focus on edge security and wear resistance means the insert supports higher cutting parameters while maintaining surface quality. The coated carbide construction reduces microchipping and abrasion on the cutting edge, which translates into longer in-process intervals and more repeatable part geometry. For production environments where consistency is essential, this insert helps to lower scrap rates and minimise rework. The proven design promotes a controlled tool-wear progression rather than abrupt failure, supporting downstream planning and uptime. Practical selection and application guidance for production settings Choosing the right insert geometry and grade has a direct impact on cycle time and final component quality. When integrating this indexable plate into machining processes, attention to workpiece material group (M or S), coolant strategy and cutting parameters is crucial. For tailored recommendations—for example, suggested cutting speeds, feeds or compatible holders—consultation with a technical advisor ensures the grade and chipbreaker match the application. This approach helps to secure the anticipated productivity gains and maintain a stable machining process. Contact Metav Werkzeuge for an application-specific recommendation on the SX-3E300N02-CF6 WSM33G insert and for procurement assistance; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SX-3E300N02-CF6-WSM33G-WALTER Product type: Drehwendeschneidplatte / Fräswendeschneidplatte ISO designation: SX-3E300N02-CF6 WSM33G Manufacturer: Walter Tools Facts Grade family: Tiger·tec Gold Chipbreaker: 3E300N02-CF6 Material groups: S / M SKU: SX-3E300N02-CF6-WSM33G-WALTER Special features Coated carbide grade WSM33G Optimised for rostfreier Stahl and superalloys Secure chip control and stable cutting edge Designed for turning and milling applications FAQ What materials is this insert suitable for? The SX-3E300N02-CF6 WSM33G insert is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat-resistant superalloys/titanium. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSM33G grade improves heat resistance and wear behaviour, helping the insert maintain a stable cutting edge and consistent tool life under elevated temperatures. What role does the CF6 chipbreaker play? The chipbreaker 3E300N02-CF6 promotes controlled chip formation and evacuation, which reduces the risk of built-up edge and minimises interruptions for chip clearing during continuous turning or milling. Is this insert intended for finishing or roughing operations? Depending on the chosen cutting parameters and holder geometry, the insert can be used in both finishing and productive semi-finish operations where secure edge stability and chip control are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification purposes. There is no affiliation between Metav Werkzeuge and the manufacturers listed. The offered article is an original, factory-new product from Walter Tools.
SX-3E300N02-CF6 WSM43G WSM43G Wendeplatten - Walter Tools
High wear resistance and a Tiger·tec Gold coating provide long tool life and consistent surface finish when machining rostfreier Stahl and superalloys. The optimised 3E300N02-CF6 chipformer ensures controlled chip breakage and reliable process security. Order directly via Metav Werkzeuge or consult our application specialists for tailored tooling recommendations. SX-3E300N02-CF6 WSM43G Walter Tools – Turning / Milling Indexable Insert with Tiger·tec Gold Coating The SX-3E300N02-CF6 WSM43G is a coated indexable insert developed for demanding turning and milling tasks, particularly for machining rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Gold coated carbide Optimised chip control geometry Suited for rostfreier Stahl and superalloys Stable cutting edge for productive machining Consistent edge life for hard-to-machine materials The combination of Tiger·tec Gold coating and the WSM43G carbide grade delivers a measurable improvement in wear resistance and thermal stability. Coated carbide reduces flank wear and helps avoid premature build‑up edge, which is especially relevant when machining rostfreier Stahl, where material adherence and heat generation can compromise dimensional accuracy. This yields fewer insert changes, more predictable tool life and a consistent surface finish — clear advantages for batch production and precision components. Controlled chips, improved process security The integrated 3E300N02-CF6 chipformer is designed to break chips reliably under varied cutting conditions. By guiding chip formation and evacuation, the geometry reduces the risk of long, entangling chips and minimises interruptions at the machining centre. Improved chip control reduces spindle loads and operator interventions, supporting more efficient cycle times and a lower incidence of surface defects. Flexible use across turning and milling operations Designed as a dual-purpose indexable insert for both turning and milling applications, this grade supports streamlined tooling strategies. The insert’s suitability for material groups S and M makes it appropriate for both heat‑resistant superalloys and rostfreier Stahl, plus titanium alloys depending on cutting data. Using a single, robust insert family for multiple operations simplifies inventory and reduces changeover complexity while maintaining process reliability. Productivity benefits and reproducible quality A stable cutting edge and controlled wear pattern translate into reproducible part quality and reduced rework. The insert’s coated carbide construction supports higher cutting speeds and extended cutting intervals, which can improve throughput and lower cost per part. Combined with predictable edge behaviour, this leads to increased uptime and a safer, more economical production flow for precision components. For machining rostfreier Stahl and tough superalloys with proven process security, contact Metav Werkzeuge for application-specific advice and supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: SX-3E300N02-CF6-WSM43G-WALTER Designation: SX-3E300N02-CF6 WSM43G Type: Drehwendeschneidplatte / Fräswendeschneidplatte Core data Series: Tiger-tec Gold Grade: WSM43G Chipformer/Geometry: 3E300N02-CF6 Material groups: S / M Special features Coated carbide (beschichtetes Hartmetall) Suitable for rostfreier Stahl and heat‑resistant superalloys and titanium Walter Tools product FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The SX-3E300N02-CF6 WSM43G insert is specified for the material group M and is optimised for machining rostfreier Stahl, offering secure chip formation and improved thermal resistance. Can the insert be used for both turning and milling? The insert is intended for combined turning and milling applications; its geometry and grade support versatile use across both process types while simplifying tooling requirements. What is the role of the WSM43G grade and Tiger·tec Gold coating? The WSM43G grade, paired with Tiger·tec Gold coating, enhances wear resistance and edge stability, especially under the thermal and mechanical loads encountered with superalloys and rostfreier Stahl. How does the 3E300N02-CF6 chipformer affect machining? The 3E300N02-CF6 chipformer promotes consistent chip breakage, improving evacuation and reducing the likelihood of chip-related interruptions, which supports stable cycle times and surface quality. Is this a factory-new original product from the manufacturer? Yes. The offer refers to an original, factory‑new insert from the manufacturer Walter Tools and is described with the manufacturer’s specified grade and geometry. Manufacturer: Walter Tools. Trademarked names and product designations are the property of their respective owners. Brand names are used for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original factory‑new product of the manufacturer.
SX-3E300N02-CK8 WK1 WK1 Wendeplatten - Walter Tools
Take advantage of the combination of the uncoated carbide WK1 grade and the 3E300N02-CK8 chipbreaker for predictable chip control and steady cutting performance; order directly via Metav Werkzeuge or consult the team for application-specific guidance. SX-3E300N02-CK8 WK1 turning/milling indexable insert – Walter Tools, uncoated carbide with 3E300N02-CK8 chipbreaker A SX-3E300N02-CK8 WK1 indexable insert engineered for precision turning and milling in industrial metalcutting, offering controlled chip formation and a robust cutting edge for general production use. Uncoated carbide grade WK1 Integrated 3E300N02-CK8 chipbreaker Suitable for diverse workpiece materials Consistent edge stability from Walter Reliable cutting performance for production workflows The insert is based on an uncoated carbide grade designed to deliver consistent cutting behaviour under industrial conditions. The WK1 grade provides a predictable balance between toughness and hardness, which translates into reliable tool life in many standard machining tasks. Coupled with the 3E300N02-CK8 chipbreaker, the geometry promotes controlled chip flow, reducing interruptions and the need for manual chip handling. This configuration supports sustained machining performance and contributes to higher process uptime in repetitive production environments. Simple fitment and predictable tool behaviour in systems As an indexable plate for turning and milling, the item integrates with common toolholder systems used in workshops and production lines. The insert’s specification ensures a stable clamping interface and repeatable seating, which helps maintain part-to-part consistency. Where material suitability is critical, the product matrix should be consulted to confirm optimal cutting parameters and recommended workpiece types. The insert’s open-grade series approach allows selection flexibility across different tasks while keeping setup straightforward for maintenance and rotation. Controlled chip formation and process security The chipbreaker designation 3E300N02-CK8 signifies a geometry tailored for controlled fragmentation and evacuation during cutting. In processes where chip control affects surface finish and machine safety, this geometry reduces the risk of long, entangling chips and supports consistent surface quality. The cutting edge stability inherent to the grade also minimises unexpected breakage, which contributes to predictable tool-change intervals and lower rework rates. For customers seeking reproducible results, the combination of chip control and grade reliability is a decisive technical advantage. Practical handling, selection advice and economic impact The insert’s uncoated nature simplifies regrinding or inspection where required, while the WK1 grade often shows robust performance across many everyday machining tasks. Selection should be guided by the tool’s series classification and the detailed product matrix, particularly for specialised materials or high-speed applications. In a production context, this leads to fewer process variances and can support better overall cost-efficiency through stable performance and reduced scrap rates. Technical sales or application engineers can assist in matching the insert to specific machines and machining strategies. Contact Metav Werkzeuge for tailored advice on Walter Tools SX-3E300N02-CK8 WK1 inserts or to request the product matrix via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SX-3E300N02-CK8-WK1-WALTER Product name: SX-3E300N02-CK8 WK1 Product type: Turning/milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts No numerical specifications provided in the source data Special features Chipbreaker: 3E300N02-CK8 Grade: WK1 (uncoated carbide) Material information: catalogue dependent ISO designation: SX-3E300N02-CK8 WK1 Internal designation: SX-3E300N02-CK8 FAQ What materials is this insert suitable for? Material suitability must be determined from the product matrix; the SX-3E300N02-CK8 WK1 insert is supplied as an uncoated carbide grade and requires verification against the intended workpiece material. Is the insert intended for turning, milling or both? The item is specified as a turning and milling indexable insert and can be used in corresponding toolholders for those operations when the correct insert geometry and clamping are applied. What is the role of the 3E300N02-CK8 chipbreaker? The 3E300N02-CK8 chipbreaker controls chip fragmentation and evacuation, promoting safer machining and more consistent surface quality with the WK1 grade. Can the insert be reconditioned or reground? As an uncoated carbide insert in the WK1 grade, regrinding is feasible where appropriate and in line with workshop capabilities, though reconditioning guidelines should follow manufacturer recommendations. How should the optimum cutting parameters be selected? Refer to the product matrix and tooling guidelines for recommended cutting speeds and feeds; Metav Werkzeuge’s consultants can provide specific parameter guidance for the SX-3E300N02-CK8 WK1 insert. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory-new product from the manufacturer.
SX-3E300N02-SF5 WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coating, the WSM33G grade and a proven chipbreaker geometry to secure stable cutting edges and reliable chip control in demanding stainless and superalloy machining; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SX-3E300N02-SF5 WSM33G turning and milling indexable insert — Tiger‑tec Gold by Walter Tools A SX-3E300N02-SF5 WSM33G indexable insert engineered for heavy‑duty machining of stainless steels and heat‑resistant superalloys, offering high thermal stability and consistent edge life Tiger‑tec Gold coating for heat resistance High stability in stainless and superalloys Optimised chipformer for controlled chips Delivering consistent performance in heat‑intensive cuts The combination of the WSM33G grade and the Tiger‑tec Gold coating provides a coated carbide solution that resists thermal degradation and reduces built‑up edge in prolonged milling and turning operations. The SX‑3E300N02‑SF5 geometry is designed to maintain a stable cutting edge, which translates into fewer unexpected tool changes and a lower cost per finished part. In practice, this means improved uptime on the machine and a predictable process window when machining materials that tend to work‑harden or generate high cutting temperatures. Measurable benefits for productivity and process security An optimised chipformer and the insert’s robust coating increase material removal rates while maintaining surface quality. The optimised chipformer promotes controlled chips, reducing the risk of recutting and improving operator safety. From a rational perspective, these features support higher throughput and improved process security: more parts per shift, consistent tolerances and reduced rework. For production environments where repeatability matters, the insert’s attributes deliver a tangible return through reduced machine idle time and tool consumption. Practical guidance for typical applications Intended for ISO material groups M and S, this insert is suitable for machining stainless steels (M) and superalloys/titanium (S) where heat resistance and edge stability are critical. The chipbreaker code 3E300N02‑SF5 denotes a geometry optimised for heavy engagement and reliable chip evacuation in both turning and milling formats. Operators unfamiliar with coated carbide technology should note that the coating improves thermal resistance but sensible cutting data and coolant strategy remain essential to achieve the rated tool life and surface finish. Proven supply quality and application support Produced by Walter Tools, the insert benefits from rigorous production controls and material science applied to the WSM33G grade. This supports repeatable performance across batches and reduces variability in multi‑shift production. For additional application data or cutting parameter recommendations, Metav Werkzeuge provides expert consultancy and sample testing to align insert selection with specific machining tasks, ensuring the right balance between productivity and component integrity. Contact Metav Werkzeuge for tailored Walter Tools Tiger‑tec Gold advice and to arrange an application review — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: SX-3E300N02-SF5-WSM33G-WALTER Product type: Turning and milling indexable insert Designation: SX-3E300N02-SF5 ISO designation: SX-3E300N02-SF5 WSM33G Series: Tiger‑tec Gold Grade: WSM33G Manufacturer: Walter Tools Facts Material groups: S / M Applicable ISO groups: M (stainless steels), S (superalloys/titanium) Chipbreaker: 3E300N02-SF5 Special features Coating technology: Tiger·tec Gold (coated carbide) Optimised chipformer and stable cutting edge Intended for heavy‑duty stainless and heat‑resistant alloys FAQ Which materials is this insert suitable for? The SX-3E300N02-SF5 WSM33G insert is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys/titanium. What does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WSM33G grade increases thermal stability and wear resistance, helping the insert maintain a stable cutting edge during high‑temperature cuts. Is this geometry suitable for both turning and milling? Yes — the chipbreaker 3E300N02‑SF5 is designed for robust chip control in both turning and milling applications, supporting heavy engagement and reliable evacuation. How does the optimised chipformer improve production? An optimised chipformer produces controlled chips that reduce recutting and machine downtime, contributing to improved throughput and surface quality in serial production. Where can tailored cutting data be obtained? Metav Werkzeuge can supply application‑specific cutting parameters and machining guidance for the Walter Tools SX‑3E300N02‑SF5 WSM33G insert to align selection with the exact workpiece and machine setup. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter AG (marketed as Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision cutting tools and forms part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer.
SX-3E300N02-SF5 WSM33S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM33S grade for reliable machining of stainless steel and heat-resistant alloys; the result is a stable cutting edge and extended tool life in demanding production. Order the insert through Metav Werkzeuge or consult the team for application support. SX-3E300N02-SF5 WSM33S — Turning/Milling Indexable Insert, Tiger·tec Silver (Walter Tools) The SX-3E300N02-SF5 WSM33S is a turning and milling indexable insert developed for heavy-duty machining of stainless steel and heat-resistant superalloys in industrial production. Tiger·tec Silver coating for heat resistance WSM33S grade optimised for stainless steel Coated carbide for a stable cutting edge Suitable for superalloys and titanium machining Increased process reliability with advanced coating technology The Tiger·tec Silver coating combined with the WSM33S grade provides pronounced heat resistance and wear protection, which directly contributes to process reliability in continuous production. Where thermal load and work-hardening challenge the cutting edge, this coated carbide geometry supports a stable cutting behaviour and reduces unplanned tool changes. For machining stainless steel, stable edge condition minimises built-up edge formation and helps maintain consistent part quality across shifts. Better chip control and surface quality with targeted geometry The 3E300N02-SF5 chipbreaker and insert geometry promote controlled chip formation for difficult-to-cut alloys, reducing the risk of entanglement and improving cycle time predictability. Improved chip control leads to fewer interrupted cuts and a more uniform finish, delivering tangible benefits in subsequent operations such as grinding or assembly. The result is not only a reduction in rework but also measurable gains in overall throughput and surface quality. Broader application span for demanding materials Designed for ISO groups M and S, this insert excels when machining stainless steel and heat-resistant superalloys or titanium alloys, where heat dissipation is limited and tool demands are high. The coated carbide grade enables robust performance across varying feed and speed regimes, making it suitable for mixed-production environments. Consistent edge strength supports repeatable performance, which is essential for high-mix, low-volume shops as well as continuous production lines. Handling and integration benefits for workshop efficiency The indexable design simplifies tool inventory and reduces set-up time compared with solid tooling; only the insert needs replacement when wear occurs, not the whole holder. Compatibility with common clamping systems and proven insert designation allows straightforward integration into existing tool families. By limiting interventions to insert exchange and inspection, maintenance intervals extend and machine uptime improves, supporting a smoother production flow. For reliable machining of stainless steel and superalloys, contact Metav Werkzeuge for availability, technical advice and application-specific recommendations for Walter Tools inserts. Technical data Article number: SX-3E300N02-SF5-WSM33S-WALTER Designation: SX-3E300N02-SF5 WSM33S Product type: Turning/Milling indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM33S Facts ISO groups: M, S Chipbreaker: 3E300N02-SF5 Coating technology: Tiger·tec Silver Material base: coated carbide Special features Suitable for stainless steel Suitable for heat-resistant superalloys and titanium Stable cutting edge and controlled chip formation Optimised for high thermal loads and work-hardened surfaces FAQ What materials is this insert suitable for? The SX-3E300N02-SF5 WSM33S insert from Walter Tools is suitable for stainless steel and heat-resistant superalloys (ISO groups M and S), with the grade formulated to resist thermal and mechanical wear. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the Walter Tools insert increases heat resistance and wear protection, resulting in longer tool life and improved process reliability when machining hard-to-cut materials. Is the insert compatible with standard turning and milling holders? The indexable geometry and standardised designation of the SX-3E300N02-SF5 allow straightforward compatibility with common toolholder systems designed for this insert style. Does this insert improve surface finish on difficult alloys? Controlled chip formation and a stable cutting edge from the WSM33S grade contribute to a more consistent surface quality, reducing the need for secondary finishing in many applications. Can this insert be used for interrupted cuts? The robust cutting edge and coated carbide substrate of this Walter Tools insert support interrupted cutting conditions typical in roughing and mixed-operation environments. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com