SX-4E400N02-SK8 WK1 WK1 Wendeplatten - Walter Tools
The combination of a universal geometry, an uncoated carbide WK1 grade and a controlled chipformer delivers consistent machining results and predictable tool life; secure production stability by sourcing the insert from Metav Werkzeuge or consult the specialist team for clarification or selection support. SX-4E400N02-SK8 WK1 – Indexable insert for turning and milling, chipformer 4E400N02-SK8, Walter Tools A compact indexable insert in the SX-4E400N02-SK8 WK1 designation engineered for combined turning and milling operations, offering a robust uncoated carbide grade and a dedicated chipbreaking geometry for stable metalcutting performance. Universal turning and milling geometry Uncoated carbide WK1 grade Optimised chipformer 4E400N02-SK8 Stable, repeatable cutting performance Predictable chip control for smoother cycles The dedicated chipformer 4E400N02-SK8 is designed to produce consistent chip shapes across interrupted and continuous cuts, which reduces the risk of built-up edge and enhances process stability. This geometry supports reliable evacuation of swarf in mixed turning and milling applications, enabling fewer interruptions during cycle runs. For shops aiming to increase machine up-time and reduce manual intervention, the consistent chip behaviour provided by this insert assists in maintaining steady feed and speed settings, simplifying process parameter selection. Reliable uncoated carbide grade for robust cutting Manufactured in the open Walter grade series and specified as WK1, the insert is an uncoated carbide type that prioritises toughness and repeatable performance in a variety of production settings. Uncoated grades are often selected where edge stability and resistance to chipping outweigh the need for wear-reducing coatings; this makes the grade especially suitable for operations that involve variable cutting conditions or occasional interruptions. The material choice supports predictable flank wear and straightforward reconditioning or replacement, contributing to controllable tool-life economics. Practical fit into production and selection guidance The insert suits combined indexable tooling systems for both turning and light milling tasks where a universal cutting geometry is advantageous. Compatibility depends on the toolholder and the specific machining matrix of the application, so material suitability and cutting data should be verified against the product matrix before deployment. The open-series grade approach offers flexibility for process engineers to match cutting parameters to the grade’s toughness characteristics, helping to balance tool life and surface finish in serial production. Contact Metav Werkzeuge to discuss Walter Tools SX-4E400N02-SK8 WK1 and to obtain tailored cutting data or stocking options for immediate integration into existing toolrooms Technical data SKU: SX-4E400N02-SK8-WK1-WALTER Product designation: SX-4E400N02-SK8 WK1 Product type: Indexable insert (turning / milling) Manufacturer: Walter Tools Grade: WK1 Chipbreaker: 4E400N02-SK8 Material: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Core data ISO designation: SX-4E400N02-SK8 WK1 SKU code: SX-4E400N02-SK8-WK1-WALTER Special features Uncoated carbide Universal geometry for turning and milling Open-series Walter grade for flexible application matching Recommended: verify workpiece suitability via product matrix FAQ Which materials is this insert suitable for? The suitability of the SX-4E400N02-SK8 WK1 insert depends on the workpiece material; the grade is an uncoated carbide WK1 and material compatibility should be checked against the product matrix provided by Walter Tools. Is the SX-4E400N02-SK8 WK1 coated? No, the SX-4E400N02-SK8 WK1 is an uncoated carbide insert, chosen where edge toughness and resistance to chipping are priorities. What chipbreaker does the insert use? This insert features the 4E400N02-SK8 chipformer, designed for controlled swarf formation in mixed turning and milling applications. Can this insert be used for both turning and milling? Yes, the insert is specified for combined turning and milling applications thanks to its universal geometry, but toolholder compatibility and process parameters must be confirmed. How should material suitability be verified for production use? Material suitability for the SX-4E400N02-SK8 WK1 should be established by consulting the Walter Tools product matrix and matching the workpiece material to the grade characteristics. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trade names and trademarks are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation and identification purposes. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
SX-4E400R6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
High thermal resistance and a stable cutting edge ensure consistent performance when machining stainless steel and heat-resistant alloys; the Tiger·tec Gold coating extends tool life while the optimised chipbreaker delivers secure chip control — order the SX-4E400R6-CE4 WSM33G indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed SX-4E400R6-CE4 WSM33G indexable turning insert, Tiger·tec Gold – for stainless steel and superalloys | Walter Tools SX-4E400R6-CE4 WSM33G is a Tiger·tec Gold coated indexable turning insert engineered for heavy-duty turning of stainless steel and high-temperature superalloys in industrial production. Tiger·tec Gold coating for extended tool life Optimised geometry for secure chip control Designed for stainless steel and superalloys Stable cutting edge at elevated temperatures Reliable performance in demanding materials The insert executes reliable metal removal in demanding material groups thanks to the WSM33G grade, a coated cemented carbide specifically developed for the ISO groups M and S. The combination of a wear-resistant coating and base carbide provides improved thermal resistance and reduces flank wear under high cutting temperatures. This results in more predictable machining cycles when processing stainless steel and heat-resistant superalloys, where stable edge retention is essential for cycle time consistency and reduced rework. Consistent chip control for process stability The integrated 4E400R6-CE4 chipbreaker geometry delivers reproducible chip formation, which supports uninterrupted production and safer chip evacuation on conventional and CNC lathes. Consistent chip control reduces the risk of built-up edge and surface damage, translating into a more uniform component finish and fewer machine interruptions. The insert geometry is tuned to balance cutting forces and surface integrity, making finishing passes more straightforward while maintaining productivity. Longer tool life and economic machining Tiger·tec Gold technology extends tool life through improved wear resistance and a tougher coating-substrate interface. The result is fewer indexings and longer intervals between tool changes, supporting a lower cost per component under continuous use. The robust cutting edge and optimised chipformer help maintain dimensional stability across repetitive parts, which benefits batch production and tight-tolerance turning. For operations targeting both high throughput and consistent quality, the grade offers measurable benefits in process security and productivity. For high-reliability turning of stainless steel, specify the Walter Tools Tiger·tec Gold grade and contact Metav Werkzeuge for application advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number/SKU: SX-4E400R6-CE4-WSM33G-WALTER Product designation: SX-4E400R6-CE4 WSM33G Product type: indexable turning insert Manufacturer: Walter Tools Core data Grade/series: Tiger·tec Gold Grade designation: WSM33G Chipbreaker: 4E400R6-CE4 Features & applicability Coating: Tiger·tec Gold (coated cemented carbide) Material groups: S / M Suitable for: stainless steel, heat-resistant superalloys and titanium Optimised for secure chip control and stable cutting edge FAQ What materials is this insert suitable for? The SX-4E400R6-CE4 WSM33G indexable turning insert is suitable for machining stainless steel (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S), offering thermal resistance and edge stability for these materials. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM33G grade improves wear resistance and heat management, which extends tool life and supports consistent cutting performance under elevated temperatures. Which chipbreaker does the insert use and what is its purpose? This insert features the 4E400R6-CE4 chipbreaker, designed to produce controlled chips for safer evacuation and improved surface finish, enhancing process stability in turning operations. Is this insert suitable for high-volume production? Yes, the Walter Tools WSM33G grade is engineered for productive machining with a stable cutting edge and reduced wear, making it appropriate for continuous high-volume turning of stainless steel and superalloys. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. The referenced brands are named for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, brand-new product from the manufacturer.
SX-4E400R6-CE4 WSM43G WSM43G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating together with the WSM43G grade to secure heat resistance and a stable cutting edge for demanding turning tasks; the insert supports consistent chip formation in stainless steels and heat‑resistant superalloys. Order or request application advice via Metav Werkzeuge for an efficient machining solution. SX-4E400R6-CE4 WSM43G – Indexable turning insert, Tiger·tec Gold, for stainless steels · Walter Tools SX-4E400R6-CE4 WSM43G is an indexable turning insert designed for heavy‑duty turning of stainless steels and heat‑resistant superalloys, offering high wear resistance and reliable chip control. Tiger·tec Gold coating for high wear resistance WSM43G grade optimised for heat‑resistant materials Stable cutting edge for reliable chip control Ideal for stainless steels and superalloys Maximise process security when machining difficult materials The Tiger·tec Gold coating combined with the WSM43G coated‑carbide grade delivers improved thermal stability and wear resistance, which is crucial when machining stainless steels and superalloys (ISO groups M and S). These materials tend to generate heat and adhere to the cutting edge; the grade is engineered to support consistent chip formation and to reduce the risk of built‑up edge. This results in longer tool life and fewer interruptions in production, helping to maintain a steady machining rhythm. Predictable chip control and improved surface quality The insert features the chipbreaker 4E400R6-CE4, which is designed to promote controlled chip formation across a range of turning conditions. Controlled chip flow reduces the likelihood of entanglement and enhances process reliability, while the combination of geometry and coating contributes to a consistent surface finish. For workshop environments where repeatability matters, this insert helps ensure that cutting forces and chip behaviour remain stable throughout a batch run. Practical advantages for productivity and tool management As an indexable turning insert, the SX‑4E400R6‑CE4 WSM43G supports quick index changes and predictable performance across repeated cycles. The grade’s heat resistance and edge stability mean fewer tool changes and lower downtime, translating into measurable productivity gains. For integrators and machinists aiming to optimise throughput on demanding alloys, the insert provides a dependable balance of wear resistance and cutting‑edge stability that simplifies tool selection and inventory planning. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to check availability for specific turning applications. Technical Data SKU: SX-4E400R6-CE4-WSM43G-WALTER Article designation: SX-4E400R6-CE4 WSM43G Product type: Indexable turning insert Brand: Walter Tools Facts Grade: WSM43G Series: Tiger·tec Gold Chipbreaker: 4E400R6-CE4 Material groups: S / M Stainless steel applicability: Yes Special features Coating technology: Tiger·tec Gold Coated carbide grade Suitable for stainless steels and heat‑resistant superalloys Stable cutting edge and reliable chip control FAQ Which materials is this insert suitable for? The SX-4E400R6-CE4 WSM43G insert is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), addressing the thermal and adhesive challenges typical of these materials. What are the main advantages of Tiger·tec Gold for turning? Tiger·tec Gold provides enhanced wear resistance and thermal stability, helping the insert maintain a sharp, stable cutting edge under elevated temperatures and during extended cuts. How does the 4E400R6-CE4 chipbreaker affect machining? The chipbreaker 4E400R6-CE4 promotes controlled chip formation and predictable chip evacuation, which supports process security and consistent surface finish in turning operations. Is this insert indexable and easy to manage in production? Yes, as an indexable turning insert the SX‑4E400R6‑CE4 WSM43G allows quick indexing for renewed cutting edges, supporting short tool‑change times and efficient tool management. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the leading manufacturers of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new merchandise of the manufacturer.
SX-4E400R6-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from a high-performance combination of Tiger·tec Gold coating and the WSM33G grade for secure chip formation and prolonged edge life during tough turning operations; order the insert directly via Metav Werkzeuge or request application advice from our consultants. SX-4E400R6-CF5 WSM33G — indexable turning insert (Tiger·tec Gold) by Walter Tools The SX-4E400R6-CF5 WSM33G is an indexable turning insert designed for demanding machining of stainless steels and heat-resistant superalloys, offering enhanced edge stability and controlled chip formation. Tiger·tec Gold coated for high thermal resistance Grade WSM33G for stainless and superalloy machining Stable chip control geometry 4E400R6-CF5 Optimised for heavy cutting and long tool life Consistent performance on stainless steels and superalloys The Tiger·tec Gold coating combined with the WSM33G carbide grade provides a balance of thermal resistance and edge toughness that supports stable cutting in ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium). This results in reduced risk of built-up edge and improved process reliability when tackling materials that generate high cutting temperatures and strain on the cutting edge. The geometry optimises chip control, which aids cycle-time stability and reduces manual rework. Proven durability and edge stability for productive turning Coated hardmetal technology in this insert enhances flank wear resistance while retaining a robust cutting edge under intermittent and continuous cuts. The combination of substrate and coating is tuned to withstand thermal cycling and abrasive conditions common when machining rostfreier Stahl and nickel-based alloys. The result is a measurable increase in tool life and consistent surface finish quality, translating into fewer indexings and predictable production windows. Process benefits and machining economy The insert’s chipbreaker designation 4E400R6-CF5 is engineered to generate controllable chip segments in medium to heavy removal rates, supporting coolant flow and evacuation in the cutting zone. Stable chip formation minimises spindle interrupts and tool-holder strain, which increases effective productivity and contributes to overall cost-efficiency in serial production. Where high process stability is required, this solution supports repeatable component tolerances and reduces downstream touch-up operations. Practical application guidance without compromise The insert suits turning operations where heat resistance and edge retention are priorities. Selection of appropriate cutting parameters—taking account of material, rigidity and cooling—allows the coated grade to deliver its full potential in both roughing and semi-finishing applications. For integration into existing toolholders, confirm seat compatibility with the insert designation; the geometry and chipbreaker are optimised to assist machinability rather than to require special mounting. For application-specific recommendations or to secure stock of the Walter Tools SX-4E400R6-CF5 WSM33G, contact Metav Werkzeuge for tailored advice and availability information. Technical Data Article number: SX-4E400R6-CF5-WSM33G-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Grade: WSM33G Series: Tiger·tec Gold Geometry / chipbreaker: 4E400R6-CF5 Material classification: S / M ISO designation: SX-4E400R6-CF5 WSM33G UID: SX-4E400R6-CF5-WSM33G-WALTER Facts No further numeric data provided Special features Coating: Tiger·tec Gold (coated carbide) Designed for stainless steels (ISO M) and superalloys/titanium (ISO S) Optimised chip control and stable cutting edge Suitable for medium to heavy cutting applications Product of Walter Tools engineering and quality control FAQ Is this insert suitable for stainless steels? The SX-4E400R6-CF5 WSM33G indexable turning insert is expressly designed for ISO group M materials and provides improved chip control and edge retention when machining stainless steels. Can the insert be used on heat-resistant superalloys and titanium? Yes, the WSM33G grade and Tiger·tec Gold coating make the insert suited to ISO group S materials, offering thermal resistance and a stable cutting edge under demanding conditions. What is the role of the 4E400R6-CF5 chipbreaker? The 4E400R6-CF5 geometry is tuned to produce controllable chip segmentation and efficient evacuation, supporting higher metal removal rates with reduced risk of chip entanglement. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating increases thermal stability and wear resistance, which extends index life and supports consistent surface quality across longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
SX-4E410N03-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM33G grade for long tool life and reliable machining of stainless steel and heat-resistant superalloys; order directly via Metav Werkzeuge or request advice from our consultants. SX-4E410N03-CE4 WSM33G – Indexable turning and milling insert for stainless steel and superalloys | Walter Tools A SX-4E410N03-CE4 WSM33G indexable insert designed for demanding turning and milling tasks in stainless steel and heat-resistant superalloys, optimised for stable cutting edges and secure chip control. Tiger·tec Gold coated carbide grade WSM33G Optimised for stainless steel and superalloys machining Stable chip control with 4E410N03-CE4 geometry High wear resistance and consistent tool life Longer production runs with fewer interruptions The combination of the Tiger·tec Gold coating and the WSM33G carbide formulation delivers measurable improvements in wear resistance and edge stability. Coating technology reduces thermal and abrasive wear on the cutting edges, which translates into fewer index changes and longer unattended running times. For workshops processing stainless steel or demanding superalloys, this means less downtime and a more predictable tool-change schedule, supporting higher overall equipment effectiveness. The specialised coating also helps maintain dimensional accuracy on finished components by preserving the tool geometry for longer. Predictable chip formation and improved surface quality The integrated 4E410N03-CE4 chipbreaker geometry is engineered to promote stable chip control when cutting tough materials. Stable chip formation reduces the risk of chip re-cutting and tool damage, and it supports more consistent surface finishes. In practical terms, a controlled chip flow lowers the chance of workpiece blemishes and clamping incidents, improving first-pass yield. For operators new to these geometries: a chipbreaker is a micro-geometry on the insert flank or rake that shapes and breaks chips into manageable segments, rather than allowing long, stringy chips to form. Versatility across toolholders and applications As an indexable solution for both turning and milling operations, this insert reduces the need for multiple dedicated cutters. The grade’s compatibility with materials classified as M (stainless steels) and S (heat-resistant superalloys and titanium) per ISO 513 provides clear guidance on appropriate applications; these ISO groupings indicate material behaviour rather than the insert material itself. The insert’s design allows integration into standard indexable toolholders, offering process flexibility and inventory rationalisation for job shops and production lines working with mixed material batches. Practical integration and process advice To exploit the insert’s strengths, pairing the WSM33G grade with stable clamping and appropriate coolant or cutting strategies is recommended for stainless steel and superalloys. Tool life benefits arise from controlling heat at the cutting zone and avoiding excessive interrupted cuts where possible. While cutting data depend on machine rigidity, part geometry and coolant capability, the insert’s coated carbide construction is particularly forgiving under variable cutting conditions and supports repeatable performance. For specific parameter recommendations or application trials, consult Metav Werkzeuge’s technical advisers who can suggest optimised strategies for individual components. For reliable high-performance machining with Tiger·tec Gold inserts from Walter Tools, contact Metav Werkzeuge for tailored application advice and ordering: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: SX-4E410N03-CE4-WSM33G-WALTER Designation: SX-4E410N03-CE4 WSM33G Product type: Drehwendeschneidplatte / Fräswendeschneidplatte Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WSM33G Geometry / chipbreaker: 4E410N03-CE4 Material compatibility: M, S (ISO 513) Material group: S / M Special features Coating: Tiger·tec Gold (coated carbide) Application notes: Suitable for stainless steel and heat-resistant superalloys Tool behaviour: Optimised for stable chip formation and wear resistance Intended use: Indexable turning and milling insert FAQ What materials is this insert suitable for? The SX-4E410N03-CE4 WSM33G insert is formulated for stainless steel (ISO group M) and heat-resistant superalloys/titanium (ISO group S), making it suitable for challenging, heat-retaining alloys. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM33G grade improves thermal and abrasive resistance, which results in longer tool life and more consistent cutting-edge stability under demanding conditions. How does the 4E410N03-CE4 chipbreaker help production? The 4E410N03-CE4 chipbreaker promotes controlled chip formation, reducing the risk of chip entanglement and improving surface finish consistency during turning and milling operations. Can this insert be used in both turning and milling setups? Yes, the design of this indexable insert supports both turning and milling toolholders, offering flexibility across different machining tasks without increasing inventory complexity. Is the insert available as original factory-new product? This offering is an original, factory-new insert from Walter Tools in the Tiger·tec Gold series, supplied with the specified grade and geometry. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
SX-4E480N03-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Gold coating, the WSM33G grade and an optimised 4E480N03-CE4 chipbreaker for secure chip control and long tool life; order directly via Metav Werkzeuge or consult the specialists for process adaptation. SX-4E480N03-CE4 WSM33G – Indexable insert for turning and milling, Tiger·tec Gold (Walter Tools) The SX-4E480N03-CE4 WSM33G is an indexable insert engineered for machining stainless steel and heat‑resistant superalloys, combining a Tiger·tec Gold coating with a geometry optimised for reliable chip formation and cutting‑edge stability. Tiger·tec Gold coated WSM33G grade Optimised chip control 4E480N03-CE4 Designed for stainless steel and superalloys Reliable cutting-edge stability Increased performance through advanced coating technology The Tiger·tec Gold coating and the WSM33G grade create a hard, wear‑resistant surface on a coated carbide substrate, which improves thermal resistance and reduces adhesion on the cutting edge. For the machining of stainless steel and similar materials, this combination reduces the tendency to form built‑up edge and supports a stable cutting process. The result is a measurable reduction in unplanned tool changes and more consistent part quality, making the insert well suited to production environments where uptime and repeatability are priorities. Predictable chip control thanks to dedicated geometry The 4E480N03-CE4 chipbreaker is designed to channel chips reliably across a range of feed rates and depths of cut, improving surface finish and minimising the risk of chip entanglement. This geometry supports controlled chip segmentation even when machining tough, heat‑resistant materials, which otherwise tend to produce long, stringy chips. The optimised chip control contributes directly to extended tool life and fewer interruptions during turning and milling operations, supporting a more efficient machining cycle and reduced secondary operations. Application focus and process security for demanding alloys Certified for ISO material groups M and S, the insert addresses the typical challenges of these groups: stainless steels (ISO M) that are tough and prone to work hardening, and superalloys/titanium (ISO S) that have poor thermal conductivity and stress the cutting edge. The indexable insert format enables quick index changes and consistent edge geometry, which together enhance process security and make tool management straightforward. In production settings where component consistency and traceability matter, this solution supports reproducible results across batches and shifts. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and for delivery options suited to production needs Technical data Article number: SX-4E480N03-CE4-WSM33G-WALTER Designation: SX-4E480N03-CE4 ISO designation: SX-4E480N03-CE4 WSM33G Type: Indexable insert for turning and milling Series: Tiger·tec Gold Grade: WSM33G Manufacturer: Walter Tools Core data Geometry / chipbreaker: 4E480N03-CE4 Material suitability: M / S Applicable material groups (ISO): M (stainless steel), S (superalloys, titanium) Special features Coated carbide grade Tiger·tec Gold Stable cutting-edge performance Optimised chip control for demanding materials Suitable for stainless steel and heat‑resistant alloys FAQ Is this insert suitable for machining stainless steels? The SX-4E480N03-CE4 WSM33G insert from Walter Tools is specifically designed for ISO M materials and delivers improved resistance to built‑up edge when machining stainless steel. Which materials beyond stainless steel can be machined with this grade? The WSM33G grade and Tiger·tec Gold coating are formulated for ISO S applications as well, making the insert suitable for heat‑resistant superalloys and, depending on geometry, titanium. What does the 4E480N03-CE4 designation indicate? The 4E480N03-CE4 code refers to the insert geometry and chipbreaker design; this geometry is optimised to improve chip control and surface finish during turning and milling. Can the insert be used in both turning and milling operations? Yes, the SX‑series format and the specified geometry allow the insert to be used for both turning and certain milling applications, providing flexibility in mixed production environments. How is process stability improved with this insert? Process stability is supported by the combination of a wear‑resistant Tiger·tec Gold coating, the robust WSM33G grade and the 4E480N03-CE4 chipbreaker, which together reduce edge failure and maintain consistent cutting behaviour. Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
SX-5E500N03-SE6 WSM33G WSM33G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WSM33G carbide grade for consistent wear resistance and reliable chip control in demanding stainless steel and superalloy machining. Benefit from a stable cutting edge and reduced tool variety through flexible use in both turning and milling. Order directly via Metav Werkzeuge or consult our team for cutting-data recommendations. SX-5E500N03-SE6 WSM33G indexable insert — turning/milling, Tiger‑tec Gold, Walter Tools The SX-5E500N03-SE6 WSM33G is an indexable insert engineered for heavy-duty turning and milling of stainless steels and heat‑resistant superalloys, combining a wear‑resistant coating with a chip‑control geometry for secure, repeatable machining. Tiger‑tec Gold coating for high wear resistance WSM33G coated carbide grade for tough materials Optimised chipformer for reliable chip control Suitable for stainless steels and superalloys High wear resistance for consistent process reliability The combination of the Tiger‑tec Gold coating and the WSM33G grade provides substantially improved wear resistance compared with uncoated grades. The advanced coating reduces abrasive and adhesive wear at the cutting edge, which translates into longer tool life and fewer interruptions in production. Coated carbide means a hard substrate with a protective surface layer; this pairing enables stable cutting under elevated temperatures typical for machining stainless steels and superalloys, leading to better overall process reliability. Secure chip control reduces downtime and improves surface quality An optimised chipformer on this indexable plate promotes predictable chip breakage even in materials that tend to form long, stringy chips. Secure chip control reduces the risk of rework and machine stoppages and helps to maintain a consistent surface finish. For operations where chip evacuation and operator safety matter, the plate’s geometry supports controlled chip flow and reduces the incidence of built‑up edge, which in turn preserves the cutting‑edge integrity and the part quality. One insert for turning and milling to simplify tool management Designed for both turning and milling applications, this indexable insert offers flexibility depending on insert geometry and cutter body. Using a single grade across multiple operations can reduce inventory complexity and accelerate setup times. The insert’s compatibility with a range of toolholders and cutting strategies means fewer changeovers and a more streamlined tooling inventory while still delivering targeted performance in stainless steels and heat‑resistant alloys. Engineered for productive, repeatable manufacturing The coated carbide construction and chip control features support stable cutting‑edge behaviour, which helps to deliver repeatable component tolerances and consistent surface finish. In production environments that prioritise throughput and reproducibility, the insert’s properties contribute to higher effective productivity and predictable tool‑life planning. This makes it a practical choice for workshops seeking to maintain cycle‑time consistency and reduce unplanned tool changes. For tailored cutting data, grade selection advice or application recommendations for Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: SX-5E500N03-SE6-WSM33G-WALTER Description: SX-5E500N03-SE6 WSM33G indexable insert Series: Tiger‑tec Gold Grade: WSM33G Manufacturer: Walter Tools Facts Material group: S / M Coating: Tiger‑tec Gold Insert type: indexable insert (turning/milling) Application standard: ISO 513 groups M and S Special features Coated carbide grade WSM33G Optimised chipformer geometry Suited for stainless steels and heat‑resistant superalloys Designed for stable cutting‑edge behaviour and wear resistance FAQ Which materials are best machined with this insert? The SX-5E500N03-SE6 WSM33G indexable insert from Walter Tools is optimised for stainless steels (ISO group M) and heat‑resistant superalloys or titanium‑based alloys (ISO group S), depending on the chosen geometry. Is the insert suitable for both turning and milling operations? Yes. The SX-5E500N03-SE6 WSM33G is specified as an indexable insert for turning and milling; appropriate holder geometry and cutting parameters determine the final application. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating improves thermal and abrasive resistance at the cutting edge, which helps to extend tool life and maintain consistent cutting performance in demanding materials. How does the chipformer affect machining performance? The optimised chipformer promotes controlled chip breakage and evacuation, reducing the likelihood of built‑up edge and improving surface finish and operational safety during machining. Can this insert reduce the number of different grades needed in a workshop? Yes. The combination of the WSM33G grade and adaptable geometries allows a single insert to cover multiple applications, potentially lowering inventory diversity and simplifying tool management. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation. The offered item is an original, brand‑new product from the manufacturer.
SX-5E500N03-SE6 WSM43G WSM43G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSM43G grade delivers consistent cutting performance and extended tool life in stainless steel and heat-resistant alloys; the 5E500N03-SE6 chipbreaker supports stable chip formation for higher productivity. Order the SX-5E500N03-SE6 WSM43G insert directly via Metav Werkzeuge or consult our advisors if further process data is required. SX-5E500N03-SE6 WSM43G — Turning and milling indexable insert by Walter Tools SX-5E500N03-SE6 WSM43G is an indexable insert designed for demanding turning and milling tasks, especially in stainless steel and heat-resistant superalloys Tiger·tec Gold coating for long tool life Grade WSM43G for tough materials Optimised chipbreaker 5E500N03-SE6 Suitable for stainless steel and superalloys Consistent performance for difficult-to-machine materials The combination of the Tiger·tec Gold coating and the WSM43G carbide grade provides a balanced mix of hardness and thermal stability, specifically engineered for high-strain applications. This material pairing reduces flank wear and supports a stable cutting edge, which in turn extends periods between index changes and lowers overall tooling costs. For operations in stainless steel and titanium-based alloys, the coated substrate improves heat resistance and lowers the risk of adhesive wear, helping to maintain component tolerances and surface finish under higher cutting temperatures. Reliable chip control for uninterrupted productivity Equipped with the 5E500N03-SE6 chipbreaker geometry, the insert promotes controlled chip formation across a range of feed rates and depths of cut. Predictable chip shapes reduce the risk of entanglement and machine downtime, translating into more productive cycles and fewer interruptions. The optimised chip flow also supports safer handling and easier part extraction from fixtures, which benefits batch production runs where process stability and repeatable results are essential. Flexible application scope and process security As an indexable insert suitable for both turning and milling contexts, the design supports a variety of toolholders and machining strategies. The grade’s focus on thermal stability and edge robustness makes it a good fit for continuous process environments where longer tool life and constant surface quality are priorities. Backed by Walter Tools’ reputation for precision tooling, the insert is intended to help shops convert challenging material characteristics into reliable manufacturing outcomes. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and select the optimal variant for specific stainless steel or superalloy applications; technical consultations are available via Metav Werkzeuge. Technical data SKU: SX-5E500N03-SE6-WSM43G-WALTER Article: SX-5E500N03-SE6 WSM43G Brand: Walter Tools Series: Tiger·tec Gold Core data Grade: WSM43G Chipbreaker: 5E500N03-SE6 Application groups: S / M Numerical specifications: not specified Special features Coating: Tiger·tec Gold Substrate: coated carbide Suitable for: stainless steel (M) Suitable for: superalloys / titanium (S) Optimised for stable chip formation and edge life FAQ What materials is this insert designed to machine? The SX-5E500N03-SE6 WSM43G insert is designed for stainless steel and heat-resistant superalloys, where the WSM43G grade maintains edge stability under elevated temperatures. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on this Walter Tools insert increases thermal resistance and wear protection, which helps to maintain a stable cutting edge and extend tool life in demanding applications. Is the 5E500N03-SE6 chipbreaker suitable for varied feeds? Yes, the 5E500N03-SE6 chipbreaker is optimised for consistent chip control across a range of feeds and depths of cut, supporting uninterrupted machining and safer chip evacuation. Can this insert be used for both turning and milling operations? The design of the indexable insert supports both turning and milling contexts; selection of the appropriate holder and cutting parameters ensures best results with the SX-5E500N03-SE6 WSM43G. Where to obtain process guidance or purchase the insert? Metav Werkzeuge provides technical consultation and supply for Walter Tools inserts — contact Metav Werkzeuge for tailored cutting data and availability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are used exclusively for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
SX-5E500N04-CE4 WKP23G WKP23G Wendeplatten - Walter Tools
Combine the Tiger‑tec Gold coating's wear resistance with the WKP23G grade's reliable chip control to boost productivity and reduce tool changes; order the insert via Metav Werkzeuge or consult our specialists for application advice. SX-5E500N04-CE4 WKP23G indexable turning/milling insert — Tiger‑tec Gold, for steel and cast iron | Walter Tools The SX-5E500N04-CE4 WKP23G is a versatile indexable insert designed for productive machining of steel and cast iron in turning and milling operations. Tiger‑tec Gold coated carbide grade WKP23G Optimised chip control geometry 5E500N04-CE4 Suitable for steel (P) and cast iron (K) Increase uptime with durable coated carbide The Tiger‑tec Gold coating in combination with the WKP23G grade delivers a measurable improvement in tool life compared with uncoated alternatives. The multilayer coating reduces adhesive and abrasive wear, which helps to maintain edge integrity during longer cuts. As a result, machine uptime increases and tool-change intervals extend, supporting continuous production runs and lower tooling costs per part. Reliable chip control for consistent surface quality The insert features the 5E500N04-CE4 chipbreaker geometry, developed to produce stable, short chips when machining both steel and cast iron. Stable chip formation reduces the risk of part rework and protects the cutting edge from irregular loading. For shops moving between workpiece types, this means fewer process adjustments and a more consistent surface finish across batches. Clear material coverage and application benefits Engineered for the ISO groups P (steel) and K (cast iron), the grade balances toughness and wear resistance to handle typical heat and chip behaviour encountered in these materials. For steel components the toughness avoids premature chipping, while for cast iron the abrasive resistance counters particle-induced wear. This targeted performance makes the insert a practical choice for mixed-production environments where flexibility and repeatability are essential. Straightforward integration into existing toolholders The insert's ISO designation and geometry allow simple replacement in standard toolholders for both turning and face‑milling operations, enabling fast changeovers and predictable cutting conditions. The combination of coated carbide and proven chipbreaker design supports machining strategies that favour higher cutting speeds and stable feeds, helping to increase throughput without compromising process safety. For application-specific recommendations or a tailored cutting plan for Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge; our technicians provide practical support and rapid quotations. Technical data SKU: SX-5E500N04-CE4-WKP23G-WALTER ISO designation: SX-5E500N04-CE4 WKP23G Series: Tiger‑tec Gold Grade: WKP23G Facts Applicable ISO material groups: P (steel), K (cast iron) Chipbreaker geometry: 5E500N04-CE4 Product type: indexable turning/milling insert Special features Coated carbide (Tiger‑tec Gold) Optimised chip control Designed for productive machining and stable edge life Manufacturer: Walter Tools FAQ What materials can this insert machine effectively? The SX-5E500N04-CE4 WKP23G insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron with consistent chip control and wear resistance. Does the Tiger‑tec Gold coating improve tool life? Yes, the Tiger‑tec Gold coating applied to the WKP23G grade enhances wear resistance and edge stability, which typically extends the service life of the insert during continuous production. Is this insert compatible with standard toolholders? The insert uses a standard ISO designation and geometry, so it can be integrated into compatible turning and milling toolholders without special adapters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
SX-5E500N04-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
High thermal stability from the Tiger·tec Gold coating combined with the WSM33G grade provides consistent edge strength and reliable chip control when machining stainless steels and heat-resistant superalloys; take advantage of stable cutting performance and longer tool life—order the SX-5E500N04-CE4 WSM33G directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. SX-5E500N04-CE4 WSM33G — Milling indexable insert, Tiger·tec Gold, for stainless steels and superalloys (Walter Tools) The SX-5E500N04-CE4 WSM33G is a coated carbide milling indexable insert engineered for demanding operations in stainless steels and heat‑resistant superalloys, combining a robust grade with a chipbreaker geometry for secure chip formation. Tiger·tec Gold coating for long tool life Optimised chip control for stainless steels Robust grade WSM33G for superalloys and titanium Compatible with standard milling geometries Consistent cutting performance where heat and toughness are a challenge The combination of the WSM33G grade and the Tiger·tec Gold technology delivers a coated carbide solution designed for materials that generate high temperatures and tend toward work‑hardening. This results in thermal stability and edge stability, which translate into fewer unscheduled tool changes and more predictable component tolerances. For shops machining a mix of stainless steels and heat‑resistant alloys, the insert’s engineered surface and substrate reduce flank wear and help maintain productive cutting conditions over longer cycles. Improved chip control and reduced process variation The chipbreaker designation 5E500N04-CE4 defines a geometry optimised for controlled chip formation in tough materials. Controlled chips reduce the risk of built‑up edge and surface damage, improving repeatability and decreasing rework. By stabilising the cutting process, this solution enhances material removal rates without compromising finish, supporting a measurable increase in machining efficiency and reduced cycle time for high‑value parts. Seamless integration into milling tool systems The insert is supplied in a standard indexable insert format that fits into common milling tool bodies and clamping systems. Its compatibility with conventional tool holders minimises retrofit effort and supports quick tool changes, allowing workshops to maintain uptime. Specifying the SX‑5E500N04‑CE4 geometry with the WSM33G grade helps consolidate tool inventories for applications that demand both wear resistance and toughness. Suitable applications and operational benefits Designed primarily for processors of stainless steels and superalloys, this insert is well suited to sectors such as aerospace, power generation and specialised subcontract machining where surface integrity and dimensional accuracy are critical. The product supports stable chip formation, longer edge life and consistent surface quality, contributing to improved overall process reliability and lower part scrap rates. For complex or high‑value components, consultation with technical advisers can ensure the grade and geometry match the material and process requirements. Contact Metav Werkzeuge for application advice and to reserve the SX-5E500N04-CE4 WSM33G for demanding stainless and superalloy milling tasks Technical Data Article number: SX-5E500N04-CE4-WSM33G-WALTER Designation: SX-5E500N04-CE4 WSM33G Product type: Indexable insert / milling indexable insert Manufacturer: Walter Tools Facts Grade: WSM33G Series: Tiger·tec Gold Chipbreaker: 5E500N04-CE4 Material suitability: stainless steels, heat‑resistant superalloys / titanium Special features Coated carbide grade Enhanced thermal and edge stability Optimised chip control for difficult materials Standard indexable insert form factor FAQ What materials is this insert designed for? The SX-5E500N04-CE4 WSM33G is intended for stainless steels and heat‑resistant superalloys, offering thermal resistance and secure chip control for these demanding groups. How does the Tiger·tec Gold technology help in production? Tiger·tec Gold coating on the WSM33G grade improves heat resistance and reduces flank wear, resulting in longer tool life and more consistent machining results with fewer interruptions. Can the insert be used in existing milling systems? Yes, the insert’s standard indexable format and the 5E500N04-CE4 chipbreaker geometry are compatible with common milling tool bodies, enabling straightforward integration into established tool setups. What advantages does WSM33G offer compared with standard grades? WSM33G provides a balance of toughness and wear resistance specifically tuned to counter the challenges of work‑hardening and high cutting temperatures, improving edge reliability and reducing rework. Where to get application support or further data? For tailored advice on using the SX-5E500N04-CE4 WSM33G in specific materials or machines, Metav Werkzeuge can provide support and technical recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned for clarification purposes only. There is no affiliation between our company and the mentioned brands. The item offered is original, factory‑new merchandise of the manufacturer.
SX-5E500N04-CE4 WSM43G WSM43G Wendeplatten - Walter Tools
High-performance indexable insert combining Tiger‑tec Gold coating and the WSM43G grade for secure chip control and extended tool life; suited to machining stainless steel and heat‑resistant superalloys. Order directly via Metav Werkzeuge or consult the Metav specialists for application advice and process optimisation. SX-5E500N04-CE4 WSM43G Turning / milling indexable insert — Tiger‑tec Gold, for stainless steel & superalloys | Walter Tools SX-5E500N04-CE4 WSM43G is a Walter Tools indexable insert engineered to deliver stable cutting performance in demanding turning and milling operations on stainless steel and heat‑resistant superalloys. Tiger‑tec Gold coating for durability WSM43G coated carbide grade Designed for stainless steel and superalloys Stable chip formation and long tool life Consistent productivity through coating and grade The combination of the Tiger‑tec Gold coating and the WSM43G coated carbide grade is engineered to increase productivity when machining difficult alloys. The coating improves thermal resistance and reduces flank wear, while the substrate hardness supports edge stability under high cutting forces. This results in consistent chip formation and fewer interruptions, which in turn reduces tool change frequency and improves overall machining uptime. Reliable performance on stainless steel and superalloys This indexable insert is optimised for materials classified as M (stainless steel) and S (heat‑resistant superalloys and Titan). The grade is chosen to handle the high temperatures and adhesive tendencies associated with these materials, ensuring stable cutting edges and controlled built‑up edge formation. As a consequence, surface finish quality is maintained and rework requirements are minimised, supporting tighter production tolerances. Simple specification for process integration Although geometrical specifics are matched to machine and workpiece conditions, the insert’s defined series and grade simplify tool selection for production planning. The Tiger‑tec Gold series is known for broad applicability across difficult‑to‑machine groups, enabling planners to standardise tooling where possible and reduce inventory complexity. Clear material group compatibility allows for straightforward allocation in cutting tool databases. Operational benefits and shop‑floor implications On the shop floor, the use of this insert yields measurable benefits: improved tool life, predictable edge behaviour and better control of thermal loads. These technical advantages translate into fewer stoppages and more reliable cycle times. Where cycle consistency and part quality are priorities, the insert supports a rational, efficiency‑driven machining strategy that emphasises throughput and repeatable results. For tailored application recommendations or to secure the SX‑5E500N04‑CE4 WSM43G insert for demanding stainless steel work, contact Metav Werkzeuge for expert advice and next‑step coordination — e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: SX-5E500N04-CE4-WSM43G-WALTER Product type: Turning / milling indexable insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSM43G Facts Applicable material groups: M (stainless steel), S (heat‑resistant superalloys / Titan) Coating: Coated carbide (Tiger‑tec Gold) Application focus: Heavy‑duty machining of difficult alloys Special features Stable chip formation Enhanced thermal resistance Designed for secure edge stability Suitable for demanding turning and milling operations FAQ What materials is this insert suited for? The SX‑5E500N04‑CE4 WSM43G insert from Walter Tools is suited for stainless steel (M) and heat‑resistant superalloys/Titan (S), providing secure chip control in these material groups. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WSM43G grade increases thermal resistance and reduces wear, thereby extending tool life and improving process stability when machining difficult materials. Is this insert intended for turning or milling applications? The indexable insert is designed for both turning and milling operations, with geometry and grade selected to perform under the high stresses typical of heavy‑duty machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
SX-5E500N04-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WSM33G grade for consistent edge stability and extended tool life when machining stainless steel and heat‑resistant superalloys. The SX‑5E500N04‑CF5 geometry delivers reliable chip control and reduced risk of built‑up edge, improving process security. Order the inserts directly via Metav Werkzeuge or ask the consultants for tailored selection advice. SX-5E500N04-CF5 WSM33G — Turning and Milling Indexable Insert, Tiger‑tec Gold (Walter Tools) A SX-5E500N04-CF5 WSM33G turning and milling indexable insert engineered for secure chip formation and stable cutting edges in applications involving stainless steel and heat‑resistant superalloys. Tiger‑tec Gold coating for high temperature strength WSM33G grade for stable cutting edges Optimised chip control with CF5 geometry Suitable for stainless steel and superalloys Greater process reliability with a heat‑resistant grade The combination of Tiger‑tec Gold coating and the WSM33G coated carbide substrate is aimed at maintaining a stable cutting edge under thermal and mechanical load. For machining stainless steel and S‑group materials the grade supports secure chip formation and reduces the tendency to build up on the tool face; this translates into fewer interruptions and a more consistent surface finish. By selecting a coating and grade tuned for heat resistance, the user benefits from longer tool life and more predictable tool change intervals. Improved productivity through controlled chip breaking The insert’s chipbreaker code 5E500N04-CF5 and CF5 geometry are designed to optimise chip control in turning and milling operations, which reduces rework and machine downtime. Controlled chip flow lowers the risk of entanglement and minimises surface damage, enabling higher effective cutting parameters without compromising quality. This geometry therefore supports a rational, productivity‑focused strategy: higher material removal rates with improved process security and a steady part quality level. Clear selection criteria for demanding materials The designation indicates suitability for ISO groups M and S: M denotes stainless steels, which are prone to toughness and heat‑related issues; S denotes heat‑resistant superalloys and Titan, which demand excellent thermal stability. When choosing inserts, match the grade and geometry to the workpiece group and the intended operation—finer chipformers for finishing, robust chipbreakers for interrupted cuts. The SX‑5E500N04‑CF5 WSM33G insert integrates these considerations, offering a balance between wear resistance and edge robustness for challenging metalcutting tasks. Contact Metav Werkzeuge for application consultancy and to secure Walter Tools Tiger‑tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised grade and geometry advice Technical Data Article number (SKU): SX-5E500N04-CF5-WSM33G-WALTER Product type: Turning and milling indexable insert Designation: SX-5E500N04-CF5 WSM33G Series: Tiger‑tec Gold Grade: WSM33G Manufacturer: Walter Tools Material groups: S / M Data Geometry code: 5E500N04-CF5 Applicable ISO groups: S, M UID: SX-5E500N04-CF5-WSM33G-WALTER Special features Coating technology: Tiger‑tec Gold Coated carbide grade: WSM33G Suitable for stainless steel Suitable for superalloys and Titan Optimised chipformer for secure chip breaking FAQ Which materials is this insert designed to machine? The WSM33G grade in the SX‑5E500N04‑CF5 insert is formulated for ISO groups M and S, meaning it is particularly suited to stainless steel and heat‑resistant superalloys (including Titan) where edge stability and thermal resistance are critical. How does the Tiger‑tec Gold coating affect performance? Tiger‑tec Gold increases thermal stability and wear resistance of the coated carbide, supporting longer tool life and more consistent cutting-edge behaviour under elevated temperatures and severe cutting conditions. What does the CF5 geometry provide in practical terms? CF5 geometry delivers optimised chip control and predictable chip breaking, which reduces downtime from chip issues and improves surface integrity during both turning and milling operations. Is this insert suitable for interrupted cuts or heavy engagement? The combination of the WSM33G grade and robust chipformer design provides improved edge strength and wear resistance, making the insert a viable option for many interrupted‑cut scenarios, subject to specific machine and process parameters. How should one select between finishing and roughing variants? Choose a finer chipformer geometry and lower feeds for finishing to achieve the desired surface quality; select the CF5 or more robust chipbreaker geometries for roughing or interrupted cuts to prioritise edge protection and chip evacuation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only; there is no association implied between our company and the trademark holders. The offered article is an original, factory‑new product of the named manufacturer.
SX-5E500N04-CF5 WSM43G WSM43G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated carbide and the optimised 5E500N04-CF5 chipformer to achieve reliable chip control and extended tool life in demanding machining of stainless steel and heat‑resistant superalloys. The combination of thermal stability and a robust cutting edge supports consistent productivity in series production. Order the insert directly via Metav Werkzeuge or consult our experts for application-specific recommendations. SX-5E500N04-CF5 WSM43G indexable insert (turning/milling) – Tiger·tec Gold, Walter Tools The SX-5E500N04-CF5 WSM43G is a Tiger·tec Gold coated carbide indexable insert designed for heavy machining of stainless steel and heat‑resistant superalloys in turning and milling operations. Tiger·tec Gold coating for thermal stability Optimised 5E500N04-CF5 chipformer Suited for stainless steel and superalloys Robust cutting edge for extended tool life Higher process reliability through thermal stability and coating technology The combination of Tiger·tec Gold and a coated carbide substrate delivers improved heat resistance and wear behaviour under the elevated temperatures typical when machining stainless steel or nickel‑based alloys. The coating reduces friction at the cutting interface, which helps to limit the risk of built‑up edge and maintain a stable cutting edge over longer tool life. For production environments this means fewer insert changes, steadier component tolerances and reduced unplanned downtime. Where ISO 513 classifies workpiece groups as M (stainless steels) and S (heat‑resistant superalloys and titanium), this insert provides a balance of edge stability and wear resistance to match those material demands. Consistent chip control and reduced secondary operations The 5E500N04-CF5 chipformer is optimised to produce short, controlled chips in interrupted or continuous cuts, supporting safe evacuation in both turning and face milling. Effective chip control reduces the likelihood of rework caused by chip interference and minimises the need for secondary manual cleaning operations. The chipformer geometry also contributes to predictable cutting forces, which aids in maintaining surface finish and toolholder stability. In practice, this translates into a smoother production flow and lower cycle time variability for medium‑ to high‑volume machining. Productivity, repeatability and predictable tool life Designed for industrial production, the insert’s geometry and coating deliver repeatable performance across batches. A robust cutting edge geometry reduces flank wear and supports reproducible component quality across shifts. The product belongs to the Tiger·tec Gold series, known for a good compromise between wear resistance and edge toughness, which is particularly useful when cycle times and tool‑change intervals are critical. For operations aiming to increase throughput without sacrificing finish or dimensional control, this insert offers a pragmatic route to higher productivity and cost‑effectiveness per part. Discuss Walter Tools’ Tiger·tec Gold solutions with Metav Werkzeuge to select the optimal SX-5E500N04-CF5 insert for stainless steel and superalloy applications — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: SX-5E500N04-CF5-WSM43G-WALTER Article designation: SX-5E500N04-CF5 WSM43G Product type: Indexable insert (turning / milling) Series: Tiger·tec Gold Core data Grade / Sort: WSM43G Chipformer: 5E500N04-CF5 Material groups: S / M Suitable for stainless steel: Yes Special features Coating: Tiger·tec Gold Substrate: Coated carbide Application focus: Heavy machining of stainless steel and heat‑resistant superalloys Brand: Walter Tools FAQ What materials is this insert intended for? The SX-5E500N04-CF5 WSM43G insert is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering thermal stability and edge strength suitable for these materials. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating reduces friction and enhances heat resistance at the cutting edge, which supports a longer service life of the SX-5E500N04-CF5 insert and steadier machining performance. Which chip behaviour can be expected with the 5E500N04-CF5 chipformer? The optimised chipformer produces short, controllable chips that ease evacuation in turning and milling, reducing the risk of chip entanglement and improving process reliability. Is this insert suitable for interrupted cuts or heavy shoulder milling? Yes, the robust cutting edge geometry and coated substrate are engineered for demanding conditions, including interrupted cuts where edge stability is essential. Where can application guidance or cutting data be obtained? Cutting parameters and application advice for the SX-5E500N04-CF5 WSM43G insert are available from Metav Werkzeuge and Walter Tools’ technical documentation to ensure optimal machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SX-5E500N04-CK8 WK1 WK1 Wendeplatten - Walter Tools
Take advantage of a compact solution that combines cost-effective uncoated carbide and an optimised chipformer (5E500N04-CK8) to stabilise cutting conditions and support consistent production. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. SX-5E500N04-CK8 WK1 — Turning / Milling Indexable Insert, uncoated carbide, 5E500N04-CK8 chipformer (Walter Tools) The SX-5E500N04-CK8 WK1 is an indexable insert developed for general turning and face-milling tasks, offering a compact geometry and a dedicated chip control feature for stable machining in industrial environments. Uncoated carbide grade WK1 Optimised chipformer 5E500N04-CK8 For turning and face milling operations Increased process reliability through controlled chip formation The insert is designed to deliver consistent chip control via the chipformer 5E500N04-CK8, which reduces the risk of irregular chips and supports predictable cutting forces. The open-series Walter grade WK1 is an uncoated carbide formulation that provides a balance between hardness and toughness; this helps to maintain a stable cutting edge during varied machining cycles. Where operators or process planners require precise material recommendations, the workpiece suitability matrix should be consulted to ensure the grade matches the application. Versatile geometry for efficient turning and milling The geometry of this indexable component is oriented towards flexibility across turning and face-milling setups, enabling quicker changeovers and fewer regrinds. The indexable insert concept reduces machine downtime because corners can be rotated rather than replaced, delivering an efficient production rhythm. The combination of a compact form and the dedicated chipformer improves swarf evacuation and contributes to lower spindle loads under comparable cutting parameters, which in turn supports higher throughput without complex tool investments. Practical handling and economical use in production As an uncoated carbide solution in Walter's open series, the insert suits operations where simple, robust performance is required and coating compatibility is not essential. The design supports straightforward mounting and indexing, which simplifies tool management and inventory planning. When integrated into a systematic tooling strategy, the component can contribute to attractive lifecycle economics through predictable wear behaviour and ease of replacement. For specific cutting data and to confirm application scope, Metav Werkzeuge can provide the necessary documentation and assistance. Contact Metav Werkzeuge today for genuine Walter Tools SX-5E500N04-CK8 WK1 inserts and expert guidance on process implementation Technical data Article number: SX-5E500N04-CK8-WK1-WALTER Product type: Drehwendeschneidplatte / Fräswendeschneidplatte ISO designation: SX-5E500N04-CK8 WK1 Series: Walter Schneidstoffsorte - Serie offen Grade / Sort: WK1 Chipformer: 5E500N04-CK8 Manufacturer: Walter Tools Material: Katalogabhängig Facts No numerical specifications provided in the source data Special features Uncoated carbide grade WK1 Optimised chipformer 5E500N04-CK8 Part of Walter Schneidstoffsorte - Serie offen Indexable insert for turning and face milling Workpiece suitability: refer to product matrix FAQ What materials can this insert machine? Material suitability depends on the concrete product matrix; the SX-5E500N04-CK8 WK1 is an uncoated carbide grade and users should check the workpiece compatibility table before selection. Is the SX-5E500N04-CK8 WK1 suitable for both turning and milling? Yes, the design supports turning and face-milling operations; its geometry and the 5E500N04-CK8 chipformer are intended to provide flexible use across those applications. Does the insert come coated? No. The WK1 designation indicates an uncoated carbide grade within Walter’s open series. How does the 5E500N04-CK8 chipformer improve machining? The chipformer promotes controlled chip breakage and evacuation, which helps to stabilise cutting forces and improves process predictability for the SX-5E500N04-CK8 WK1 insert. Where can detailed cutting data be obtained? Detailed cutting parameters and application recommendations are available via Metav Werkzeuge; consult their documentation or technical advisors for the SX-5E500N04-CK8 WK1. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used only for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
SX-5E500N04-SF5 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from the combination of durable coated carbide, optimised chip control and reliable edge stability for consistent production results; order the insert directly via Metav Werkzeuge or consult our experts for application-specific advice. SX-5E500N04-SF5 WSM33G turning and milling indexable insert — Tiger·tec Gold, Walter Tools (for rostfreier Stahl & superalloys) The SX-5E500N04-SF5 WSM33G is a coated indexable insert designed for heavy-duty turning and milling operations, offering thermal resistance and edge stability for machining rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold coating for heat resistance Optimised for rostfreier Stahl and superalloys Stable cutting edge for reliable process Consistent chip control under heavy cuts Improved process reliability when machining rostfreier Stahl The combination of Tiger·tec Gold coating and the WSM33G grade provides robust wear resistance and controlled friction in demanding conditions. This results in a stable cutting edge that reduces flank wear and minimises unexpected tool changes, increasing uptime. For production planning, predictable tool life translates into fewer interruptions and simpler inventory management. The insert's metallurgy and coating work together to support secure chip control, which is especially important when working with rostfreier Stahl that tends to adhere and form built-up edges. Maintain cutting performance under thermal stress Heat-resistant materials and titanium alloys place significant thermal and mechanical load on cutting edges; the selected grade is engineered to withstand those stresses. The coated carbide substrate offers improved heat resistance and edge toughness, reducing the risk of premature chipping during prolonged cuts. As a result, process stability and surface finish remain consistent across longer cycles, helping to keep component tolerances within specification while preserving productivity in series manufacturing. Geometry that supports productivity and predictable chips The integrated chipbreaker, identified as 5E500N04-SF5, is tuned for secure chip formation and evacuation under heavy feed conditions. This geometry improves swarf control and minimises interruptions caused by chip entanglement or recutting. Better chip flow also reduces the need for secondary operations and contributes to consistent part quality. The insert's design therefore supports higher material removal rates while keeping machine and handling time efficient — a clear gain for throughput-focused workshops. Practical application guidance for shop-floor integration For turning and light milling tasks on rostfreier Stahl and superalloys, select the insert geometry and clamping that match the intended depth of cut and feed to exploit the WSM33G grade fully. When paired with appropriate cutting parameters and coolant strategies, the insert delivers repeatable performance and helps lower total machining cost per component through fewer tool changes and rework. Walter Tools' engineering background ensures compatibility with standard toolholders and established machining practices, making the insert easy to introduce into existing setups. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts for rostfreier Stahl machining and to arrange tailored recommendations Technical Data SKU: SX-5E500N04-SF5-WSM33G-WALTER Article designation: SX-5E500N04-SF5 WSM33G Product type: Turning and milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material group: S / M (superalloys/titanium; rostfreier Stahl) Grade: WSM33G Chipbreaker: 5E500N04-SF5 UID: SX-5E500N04-SF5-WSM33G-WALTER Special features Coating technology: Tiger·tec Gold Suitable for: rostfreier Stahl and heat-resistant superalloys Stable cutting edge for reliable processing Optimised chip control for heavy cuts FAQ What materials is this insert best suited for? The SX-5E500N04-SF5 WSM33G insert is suited for rostfreier Stahl and heat-resistant superalloys; the WSM33G grade and Tiger·tec Gold coating support secure chip formation and temperature stability. Which chipbreaker does this insert use and why does it matter? This insert uses the 5E500N04-SF5 chipbreaker; its geometry enhances chip control and evacuation, improving process reliability for turning and milling operations with heavy feeds. Can the insert be used for both turning and milling? Yes, the turning and milling indexable insert design by Walter Tools allows use in suitable toolholders for both light milling and turning tasks when parameters are adjusted accordingly. How does the Tiger·tec Gold series benefit production? Tiger·tec Gold coating provides enhanced heat resistance and wear behaviour, which extends tool life and contributes to consistent surface quality across production batches. Is this insert compatible with standard toolholders? The SX-5E500N04-SF5 WSM33G follows common industry indexable insert dimensions and is compatible with standard clamping systems designed for this insert family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-5E500N04-SF5 WSM43G WSM43G Wendeplatten - Walter Tools
Benefit from the combination of process reliability, extended tool life and excellent wear resistance for dependable metalcutting results; order the insert directly via Metav Werkzeuge or consult our technical team for selection support. SX-5E500N04-SF5 WSM43G – Turning / milling indexable insert, Tiger·tec Gold by Walter Tools SX-5E500N04-SF5 WSM43G is a coated carbide insert designed for demanding turning and milling tasks, optimised for stainless steels and heat-resistant superalloys where secure chip control and edge stability are essential. Tiger·tec Gold coating for high wear resistance Optimised chipbreaker for stable chip formation Suitable for stainless steels and superalloys Robust coated carbide grade WSM43G Increased process security for difficult-to-machine materials The WSM43G grade from Walter Tools combines a Tiger·tec Gold coating with a coated carbide substrate to deliver improved wear resistance and consistent cutting performance when machining stainless steels and nickel‑based alloys. This engineered combination reduces flank and crater wear under high thermal load, resulting in fewer interruptions, more predictable cycle times and a measurable boost to productivity. For production environments where reproducible part quality matters, the grade supports stable machining parameters and reduces scrap rates. Predictable chip control and edge life through geometry The insert’s chipbreaker designation 5E500N04-SF5 is engineered to promote secure chip segmentation and evacuation in sticky, tough materials. The geometry focuses cutting forces onto a controlled shear zone, which lowers the tendency for built-up edge and mitigates heat concentration at the cutting edge. The result is longer effective edge life and fewer insert changes per shift—benefits that directly reduce tooling costs and set-up downtime while maintaining consistent surface finish. Versatility in turning and milling operations Designed as a combined turning and milling insert, this part supports flexible use across a range of operations, simplifying tooling inventories and easing job changeovers. The coated carbide construction is tolerant of the thermal and mechanical stresses inherent to interrupted cuts and mixed‑operation cycles. In practice, shops achieve a balance of cost-effectiveness and machining robustness, especially when processing workpieces that include both stainless steels and high‑temperature alloys. Practical advantages for workshop planners Adopting this Walter Tools grade helps planners standardise on a single robust insert for several challenging material groups, reducing tooling complexity and easing procurement. The engineering behind the grade emphasises stable cutting edges and controlled chip formation, which supports more consistent cycle times and predictable maintenance intervals. For teams evaluating process improvements, the insert represents a pragmatic step towards higher overall equipment effectiveness (OEE). For reliable high-performance machining with Tiger·tec Gold technology, contact Metav Werkzeuge for availability and tailored grade advice — expert support is available by email or phone through Metav Werkzeuge. Technical data Article number: SX-5E500N04-SF5-WSM43G-WALTER Description: Drehwendeschneidplatte / Fräswendeschneidplatte SX-5E500N04-SF5 WSM43G Walter Tools Manufacturer: Walter Tools Product type: Turning / milling indexable insert Series: Tiger·tec Gold Grade: WSM43G Geometry: SX-5E500N04-SF5 Chipbreaker: 5E500N04-SF5 Material designation: S / M Facts Suitable for M: stainless steels Suitable for S: heat‑resistant superalloys and titanium Coating technology: Tiger·tec Gold Carbide: coated carbide Application: turning and milling Special features Coated carbide for thermal stability Stable cutting edge for extended life Optimised chipformer for secure chips Designed for difficult‑to‑machine materials Walter Tools quality and process focus FAQ What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances heat and wear resistance, which helps the SX-5E500N04-SF5 WSM43G insert maintain cutting‑edge integrity and extend tool life when machining stainless steels and superalloys. Which materials are best suited to this insert? This insert is intended for stainless steels (M) and heat‑resistant superalloys/titanium (S); the grade performs well where high temperatures and poor thermal conductivity demand robust edge stability. Can the insert be used for both turning and milling? Yes—this turning/milling indexable insert is engineered for combined applications, offering flexibility to simplify tooling in mixed‑operation production. How does the chipbreaker geometry affect machining? The 5E500N04-SF5 chipbreaker promotes controlled chip formation and evacuation, reducing built‑up edge and improving process security, which supports consistent surface finish and longer cutting periods. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-5E500R6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Reliable machining of stainless steel and heat‑resistant alloys is achieved through the combination of the Tiger·tec Gold coating and the WSM33G carbide grade, delivering stable edge life and consistent chip control for productive turning. Order the SX-5E500R6-CE4 WSM33G insert via Metav Werkzeuge or request application advice from the consultants. SX-5E500R6-CE4 WSM33G – Turning indexable insert with Tiger·tec Gold coating by Walter Tools The SX-5E500R6-CE4 WSM33G is a coated carbide turning insert engineered for demanding applications in stainless steel and heat‑resistant superalloys. Tiger·tec Gold coating for high thermal resistance WSM33G grade for tough, chip-secure performance Designed for stainless steel and superalloys Stable cutting edge for productive turning Higher cutting performance for difficult materials The combination of Tiger·tec Gold and the WSM33G grade delivers improved thermal resistance and wear behaviour during turning of difficult‑to‑machine materials. The coated carbide construction supports secure chip control and reduces the tendency to form a built‑up edge when machining stainless steel (ISO group M) and alloys categorised under ISO group S. This results in more consistent surface finishes and fewer unscheduled tool changes, which contributes directly to higher process efficiency on shop‑floor turning operations. Consistent chip formation and edge stability for increased productivity The integrated chipbreaker designation 5E500R6-CE4 is developed for secure chip evacuation and controlled cutting forces. With this geometry, the indexable insert maintains a stable cutting edge under the thermal and mechanical loads typical of stainless steel and superalloys, allowing longer cutting intervals and predictable replacement cycles. In practice, the design supports both roughing and semi‑finishing passes where reliable chip flow and edge integrity are essential to avoid downtime and scrap. Practical advantages for workshop integration As an indexable turning solution, the insert offers rapid reconditioning through simple seat replacement, enabling uninterrupted production cycles. Reduced tool change frequency, thanks to the stable cutting edge, lowers running costs and increases net machining time. The insert benefits from Walter Tools’ manufacturing standards, which focus on reproducible cutting behaviour and consistent batch quality. For specific application parameters or to confirm suitability for a given turning task, Metav Werkzeuge consultants can provide tailored recommendations and machining data. For machining stainless steel and heat‑resistant superalloys with dependable performance, contact Metav Werkzeuge for application support and availability of the SX-5E500R6-CE4 WSM33G from Walter Tools. Technical data Article number: SX-5E500R6-CE4-WSM33G-WALTER Name: SX-5E500R6-CE4 WSM33G Type: Drehwendeschneidplatte (turning indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts No numerical specifications provided in the dataset Special features Coating: Tiger·tec Gold Carbide grade: WSM33G (coated carbide) Chipbreaker: 5E500R6-CE4 Application: stainless steel (ISO group M) Application: Heat‑resistant superalloys and titanium (ISO group S) FAQ What materials is this insert suitable for? The SX-5E500R6-CE4 WSM33G insert is specified for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), offering tailored performance where secure chip control is required. How does the Tiger·tec Gold technology benefit turning operations? Tiger·tec Gold coating on the WSM33G grade increases thermal resistance and wear protection, which helps the insert maintain a stable cutting edge and consistent chip formation under elevated temperatures. What role does the 5E500R6-CE4 chipbreaker play? The 5E500R6-CE4 geometry is designed to control chip flow and reduce the risk of built‑up edge, improving surface finish and lowering the likelihood of tool damage during continuous turning. Is this insert suitable for both roughing and finishing? Depending on the chosen cutting parameters and machine setup, the insert’s geometry and grade make it applicable to both roughing and semi‑finishing operations where robustness and chip control are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Walter Tools is mentioned solely for explanatory purposes; there is no affiliation between our company and the named brand. The offered article is an original, factory‑new product of the manufacturer.
SX-6E600L6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from reliable, high‑temperature performance and consistent chip control: the Tiger‑tec Gold grade delivers stable cutting edges for demanding materials, increasing productivity and reducing downtime. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. SX-6E600L6-CE4 WSM33G indexable turning insert — Tiger‑tec Gold, Walter Tools The SX-6E600L6-CE4 WSM33G is a coated indexable turning insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys Tiger‑tec Gold coating—heat resistant Optimised chip control for stable cuts Robust cutting edge for longer life Suitable for rostfreier Stahl and superalloys Proven performance on demanding alloys for steady production The Tiger‑tec Gold grade WSM33G is a coated carbide formulation optimised for machining rostfreier Stahl and high‑temperature superalloys (ISO group M and S). The combination of a heat‑resistant coating and a mechanically robust substrate gives the insert a stable cutting edge under thermal and mechanical stress. This stability reduces edge chipping and build‑up formation, which in turn results in fewer interruptions for tool changes and more predictable cycle times—key for industrial turning operations where process continuity matters most. Better chip control means fewer secondary operations A dedicated chipbreaker geometry (6E600L6‑CE4) promotes controlled chip formation even in materials prone to long, stringy swarf. Controlled chip flow improves machine safety and reduces the need for manual chip clearing or additional finishing passes. By ensuring consistent chips and lower cutting forces, the insert contributes directly to higher machine utilisation and improved surface quality, translating into measurable efficiency gains on the shop floor. Coating technology that extends tool life and quality The Tiger‑tec Gold coating enhances resistance to thermal softening and abrasive wear, preserving the cutting edge during sustained cuts. For production environments facing mixed batches of rostfreier Stahl and superalloys, this wear resistance helps keep surface finish within tolerance and minimises rework. The insert’s coating and substrate pairing were engineered to deliver a balanced performance: wear resistance where needed, combined with toughness to withstand interrupted cuts. Application guidance for reliable integration For best results, match the insert geometry and grade to the workpiece alloy and the chosen cutting parameters. Use the Tiger‑tec Gold WSM33G grade for applications where heat and edge stability are dominant concerns — for example, finishing and semi‑finishing of rostfreier Stahl components or roughing of heat‑resistant alloys. Where possible, favour stable clamping and steady feed rates to preserve the cutting edge and extend tool life; the insert’s design rewards consistent process settings with repeatable surface quality. Contact Metav Werkzeuge for tailored application recommendations and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SX-6E600L6-CE4-WSM33G-WALTER Designation: SX-6E600L6-CE4 WSM33G Type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSM33G Facts Material group: S / M Suitable for rostfreier Stahl: Yes Chipbreaker: 6E600L6-CE4 UID: SX-6E600L6-CE4-WSM33G-WALTER Special features Coating technology: Tiger‑tec Gold Material: coated carbide Application: hard-to-machine alloys and rostfreier Stahl Stable cutting edge and optimised chip control FAQ What materials is the insert suitable for? The SX-6E600L6-CE4 WSM33G insert (Walter Tools) is specified for rostfreier Stahl and heat‑resistant superalloys, corresponding to ISO material groups M and S. How does Tiger‑tec Gold benefit production? Tiger‑tec Gold coating improves thermal resistance and wear performance of the WSM33G grade, extending tool life and supporting consistent surface finish in long runs. Which chipbreaker does this insert use and why does it matter? The chipbreaker is 6E600L6‑CE4; its geometry promotes controlled chip formation, which reduces chip entanglement and improves process reliability during turning. Can this insert be used for interrupted cuts? Yes — the coated carbide grade and robust cutting edge make the insert tolerant of interrupted cuts, though best results occur with stable clamping and optimised cutting parameters. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany; www.walter-tools.com The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the group of leading manufacturers of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanatory purposes only and does not indicate any affiliation.
SX-6E600N04-CE4 WKP23G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WKP23G carbide grade for stable edge life and consistent chip control in mixed production of steel and cast iron; order the insert via Metav Werkzeuge or consult the Metav Werkzeuge team for application guidance. SX-6E600N04-CE4 WKP23G indexable turning and milling insert – Tiger‑tec Gold, Walter Tools The SX-6E600N04-CE4 WKP23G is a coated carbide indexable insert from the Tiger‑tec Gold series, engineered to deliver productive turning and milling of steel and cast iron in industrial machining applications. Tiger‑tec Gold coating technology WKP23G coated carbide grade Engineered for steel and cast iron Optimised chip control geometry 6E600N04-CE4 Faster, more consistent metal removal with advanced coating The combination of the Tiger‑tec Gold coating and the WKP23G grade delivers a measurable improvement in process efficiency for standard and demanding cuts. The coating reduces flank wear and supports higher cutting speeds where appropriate, while the substrate hardness offers resistance to abrasive wear typical for cast components. By pairing coating and grade, the insert ensures edge stability and predictable tool life under continuous operation, which helps sustain throughput and reduces unplanned tool changes in production settings. Controlled chips and reliable cutting in turning and milling The 6E600N04-CE4 chipbreaker geometry is specified to manage chip formation during interrupted or continuous cuts, improving evacuation and reducing the risk of re-cutting or tool damage. The geometry supports clean breaking of chips in both turning and milling tasks, enhancing surface finish and lowering cycle-time variability. For operators and process planners, this means fewer stoppages for chip clearing and a steadier machining rhythm, which contributes directly to higher overall equipment effectiveness. Clear application range and integration into production systems Designed for the ISO material groups P (steel) and K (cast iron), the insert is suitable where mixed batches or varied component families are machined. The product specification supports straightforward tool selection for workshops that require standardised inserts across turning and milling toolholders. Metav Werkzeuge can provide advice on grade selection and toolholder compatibility to ensure the insert integrates seamlessly into existing tool systems and process parameters. For reliable, high‑productivity machining choose Walter Tools Tiger‑tec Gold inserts — contact Metav Werkzeuge for application support and prompt supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930. Technical data Article number: SX-6E600N04-CE4-WKP23G-WALTER Designation: SX-6E600N04-CE4 WKP23G Product type: Indexable turning and milling insert Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WKP23G Chipbreaker code: 6E600N04-CE4 Material suitability: P (steel), K (cast iron) Special features Coated carbide (beschichtetes Hartmetall) Optimised for stable chip formation Suitable for turning and milling applications Series and grade for productive machining FAQ What materials is this insert intended to machine? The SX-6E600N04-CE4 WKP23G insert is designed for ISO groups P (steel) and K (cast iron), offering reliable performance in both material families. How does the Tiger‑tec Gold series benefit production? Tiger‑tec Gold provides enhanced wear resistance and thermal stability, so the WKP23G grade maintains edge stability and supports higher cutting parameters while preserving surface quality. Is the chipbreaker suitable for interrupted cuts? Yes, the 6E600N04-CE4 chipbreaker is configured to control chip shape and evacuation, making the insert appropriate for many interrupted-turning and milling scenarios. Can this insert be used across different toolholders? The insert is an indexable type compatible with corresponding turning and milling toolholders that accept the SX-6E600N04-CE4 designation; Metav Werkzeuge can advise on exact holder matches. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the brands cited. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
SX-6E600N04-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
Combine high process security, improved tool life and reliable chip control to keep production stable; order the SX-6E600N04-CE4 WSM33G insert via Metav Werkzeuge or ask our specialists for application advice. SX-6E600N04-CE4 WSM33G indexable insert — Tiger·tec Gold by Walter Tools The SX-6E600N04-CE4 WSM33G is a turning and milling indexable insert engineered for machining stainless steels and heat‑resistant superalloys in demanding production environments. Tiger·tec Gold coated carbide grade WSM33G Designed for stainless steel and superalloys Stable chip formation and edge security Chipbreaker 6E600N04-CE4 for controlled chips Maximised performance for demanding materials The Tiger·tec Gold grade WSM33G delivers a balance of wear resistance and edge stability specifically designed for difficult‑to‑machine alloys. As a coated carbide grade, it reduces flank wear and supports longer intervals between index changes, which directly improves machine uptime and lowers unit cost per component. The substrate and multi‑layer coating system are tuned to resist heat and maintain a robust cutting edge when tackling stainless steel and high‑temperature alloys, helping to avoid built‑up edge and unplanned rework. This results in predictable tool life and consistent dimensional output in serial production. Reliable chip control to maintain cycle times The integrated chipbreaker 6E600N04-CE4 is configured for reliable chip formation across variable feed and depth ranges, supporting steady evacuation in both turning and light milling operations. Controlled chips reduce the risk of surface damage and minimise manual chip handling, which keeps cycle times stable and secondary operations efficient. For workshops prioritising throughput, the combination of a tailored chipbreaker and a heat‑resistant grade offers a tangible efficiency gain by reducing interruptions and smoothing tool management procedures on the shop floor. Practical explanation of key technology choices Tiger·tec Gold refers to a coating technology combining a wear‑resistant surface with a tough substrate to withstand thermal and mechanical loads. In practice this means that the insert sustains cutting temperatures better than uncoated grades and exhibits fewer edge‑cracking events under heavy engagement. The grade designation indicates suitability: "M" denotes stainless steels, which tend to work‑harden and require controlled cutting conditions; "S" denotes superalloys and titanium, which demand high thermal stability. These classifications guide process selection and feed‑speed choices for reliable results. How the insert supports production and setup decisions Adopting a dedicated grade such as WSM33G reduces trial‑and‑error at setup and shortens ramp‑up time for new batches. The consistent wear behaviour contributes to repeatable tolerances, reducing scrap and inspection overhead. Where machinability is poor, investing in a grade engineered for heat and edge stability often pays off through fewer tool changes and improved first‑pass yield. For engineers specifying inserts, the predictable performance of this coated carbide option makes it a practical choice for mixed manufacturing runs that include stainless steel and heat‑resistant alloys. Contact Metav Werkzeuge for application guidance and secure the SX-6E600N04-CE4 WSM33G from Walter Tools to increase process reliability and tool life in demanding machining tasks Technical data SKU: SX-6E600N04-CE4-WSM33G-WALTER Designation: SX-6E600N04-CE4 WSM33G Product type: Indexable insert for turning/milling Series: Tiger·tec Gold Grade: WSM33G Manufacturer: Walter Tools Key data Applicable material groups: M (stainless steels), S (superalloys/titanium) Chipbreaker: 6E600N04-CE4 Substrate/coating: coated carbide (Tiger·tec Gold) Material classification: S / M Special features Coating technology: Tiger·tec Gold Targeted for difficult‑to‑machine materials Stable chip formation and edge security Suited to high‑temperature alloys and titanium FAQ Which materials is this insert suitable for? The SX-6E600N04-CE4 WSM33G indexable insert from Walter Tools is designed for stainless steels (M) and superalloys/titanium (S) according to the grade classification. What does the WSM33G grade offer? WSM33G is a coated carbide grade in the Tiger·tec Gold family that combines wear resistance with thermal stability to prolong edge life on demanding materials. How does the chipbreaker 6E600N04-CE4 affect machining? The chipbreaker 6E600N04-CE4 promotes controlled chip formation, which improves chip evacuation and reduces the risk of surface damage during turning and light milling. Is the insert suitable for both turning and milling operations? Yes, the designation indicates an indexable insert for turning and milling applications; geometry and setup determine the specific process use. What advantage does Tiger·tec Gold give on serial production? Tiger·tec Gold coating increases resistance to thermal and abrasive wear, resulting in more consistent tool life and reduced frequency of index changes across production runs. Protected trademarks and product names are the property of their respective owners. Trademarks and product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SX-6E600N04-CE4 WSM43G WSM43G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, Tiger‑tec Gold coating and stable chip control for reliable machining of stainless steels and superalloys; order the SX-6E600N04-CE4 WSM43G insert directly via Metav Werkzeuge or ask our consultants if needed SX-6E600N04-CE4 WSM43G — Indexable turning and milling insert (Tiger‑tec Gold) by Walter Tools SX-6E600N04-CE4 WSM43G is an indexable insert engineered for demanding turning and milling tasks on stainless steel and heat-resistant superalloys, utilising Walter Tools’ Tiger‑tec Gold coating technology Tiger‑tec Gold coated carbide grade WSM43G Optimised for stainless steel and superalloys Stable edge geometry and reliable chip control For demanding turning and milling applications Enhanced process security through Tiger‑tec Gold coating The Tiger‑tec Gold coating on this insert combines a wear‑resistant surface with excellent thermal resilience, which leads to consistent cutting performance when machining stainless steel and other stubborn alloys. The WSM43G grade is a coated carbide formulation optimised to support secure chip formation and maintain a stable cutting edge under elevated temperatures and heavy loads. For production environments where component quality and tool life are decisive, this insert offers measurable benefits: reduced edge breakdown, fewer interruptions for insert changes and a more predictable tool life pattern. Technical users will value the coating’s role in lowering flank wear rates and improving surface finish without sacrificing productivity. Reliable chip control and edge stability for improved productivity The insert’s geometry and the WSM43G grade work together to promote controlled chip formation even in materials that tend to produce stringy or adhesive chips. Stable edge behaviour reduces the risk of built‑up edge and unexpected tool failures, which translates into longer uninterrupted run times and improved process economy. In practical terms, this means fewer reworks and a more consistent surface condition on finished parts. The combination of grade and geometry also supports higher cutting parameters in many cases, enabling machines to work closer to their optimal throughput while preserving dimensional accuracy. Application guidance and integration into workflows Designed for use in turning and milling operations where stainless steel (ISO group M) and heat‑resistant alloys (ISO group S) are frequent, the insert is suitable for a range of industrial sectors from aerospace components to medical device machining. The insert’s versatility makes it straightforward to standardise across similar operations, simplifying inventory and tool management. When integrating this insert into a cutting process, consider conservative initial cutting data and a focus on coolant strategy or dry machining per process requirements; the coating and grade are intended to tolerate thermal stress but benefit from an optimised cutting environment. For toolholders and machine setups, compatibility with standard clamping systems for indexable inserts ensures quick changes and repeatable performance. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Gold inserts and receive tailored machining recommendations or sample trials via Metav Werkzeuge; eMail: info@metav-werkzeuge.com – Tel: +49 2822 7131930 Technical Data Article number: SX-6E600N04-CE4-WSM43G-WALTER Product: Indexable turning and milling insert Grade: WSM43G Series: Tiger‑tec Gold Facts ISO material groups: M (stainless steel), S (superalloys/titanium) Coating technology: Tiger‑tec Gold Special features Coated carbide insert Optimised for stainless steel and heat‑resistant alloys Stable cutting edge and improved chip control FAQ What materials is this insert designed for? The SX-6E600N04-CE4 WSM43G insert is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), providing stable performance under thermal load. How does the Tiger‑tec Gold coating affect tool life? Tiger‑tec Gold enhances wear resistance and thermal stability, extending tool life of the WSM43G graded insert and enabling more consistent cutting performance in demanding applications. Is this insert suitable for both turning and milling? Yes, the insert is specified as a combined turning and milling indexable insert and is suitable for demanding operations in both machining modes when used with appropriate holders and cutting data. Can the insert reduce downtime in production? The combination of a wear‑resistant coating and stable edge geometry supports longer uninterrupted runs and fewer insert changes, contributing to reduced downtime and improved process economy. Which series does this insert belong to and what does that signify? This insert is part of the Tiger‑tec Gold series, indicating a coated carbide solution engineered for high process security and thermal resilience in difficult‑to‑machine materials. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
SX-6E600N04-CF5 WSM33G WSM33G Wendeplatten - Walter Tools
Benefit from the proven combination of Walter Tools' Tiger‑tec Gold coating and the WSM33G grade for heat resistance and stable cutting edges in demanding operations. The result is improved process stability when machining stainless steels and superalloys; order the SX-6E600N04-CF5 WSM33G insert directly via Metav Werkzeuge or consult their specialists for application-tailored recommendations. SX-6E600N04-CF5 WSM33G — Indexable turning and milling insert, Tiger‑tec Gold, Walter Tools The SX-6E600N04-CF5 WSM33G is an indexable turning and milling insert engineered to provide durable performance in machining stainless steels and high-temperature superalloys. Tiger‑tec Gold coating for heat resistance Suited to stainless steels and superalloys Stable cutting edge for consistent performance Designed for productive, secure chip control Higher process reliability through heat-resistant coating The combination of the Tiger‑tec Gold coating and the WSM33G grade yields a coated carbide solution that resists the thermal and mechanical stresses typical of machining tough alloys. This results in longer edge life and reduced risk of premature wear when facing high heat generation or abrasive workpiece behaviour. For production environments where consistent cycle times and fewer tool changes are priorities, this grade contributes directly to stable machining and predictable part quality. The engineering focus here is on secure chip formation and protection of the cutting edge under continuous load. Machining performance tailored to demanding materials The insert is designed for the ISO material groups M and S, meaning it handles stainless steels (M) and heat-resistant superalloys or titanium (S). These materials are known for poor thermal conductivity and a tendency to work-harden; therefore, the metallurgy and coating of the grade are tuned to slow edge degradation and maintain a sharp cutting geometry. As a result, operators can expect more consistent surface integrity and fewer interruptions from notch wear or adhesive build-up. Where tight tolerances and repeatable finishes are required, the material compatibility of this insert supports reliable production. Practical advantages on the shop floor As an indexable insert, the SX-6E600N04-CF5 WSM33G enables quick index changes and straightforward inventory handling compared with brazed or solid tools. The specified chipbreaker code contributes to controlled chip evacuation and improved surface finish, reducing the need for secondary manual corrections. In combination with suitable toolholders, this insert helps to lower machine downtime and supports higher usable cutting times per insert index. The overall effect is improved throughput and a clearer return on tooling investment in medium- to high-volume machining operations. Application guidance and integration into tooling systems The chipbreaker designation 6E600N04-CF5 indicates the insert's geometry and intended chip control characteristics; this supports reliable swarf behaviour in turning and light milling tasks on the specified materials. Selection of compatible holders and appropriate cutting parameters is important to unlock the grade's full potential. For backing materials, clamping arrangement and recommended feeds and speeds suitable for stainless steels and superalloys should be matched to the insert's characteristics. The SX-6E600N04-CF5 WSM33G performs best when integrated into a complete tool system optimised for stable clamping, correct rake angles and effective coolant strategy. For tailored cutting data, availability or to discuss integration of Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: SX-6E600N04-CF5-WSM33G-WALTER Article designation: SX-6E600N04-CF5 WSM33G Product type: Indexable turning and milling insert Manufacturer: Walter Tools Facts Grade: WSM33G (coated carbide) Series: Tiger‑tec Gold Chipbreaker: 6E600N04-CF5 Applicable ISO groups: M, S Special features Coating technology: Tiger‑tec Gold Material suitability: stainless steels, superalloys (high-temperature alloys) Benefits: heat resistance, stable cutting edge, controlled chip formation FAQ Which materials is the SX-6E600N04-CF5 WSM33G best suited for? The SX-6E600N04-CF5 WSM33G is optimised for stainless steels and superalloys, corresponding to ISO groups M and S as stated by Walter Tools. What advantage does Tiger‑tec Gold provide? The Tiger‑tec Gold coating increases thermal resistance and protects the cutting edge under high temperatures, improving tool life and process stability when machining demanding alloys. What does the chipbreaker 6E600N04-CF5 achieve? The 6E600N04-CF5 chipbreaker is designed to promote consistent chip formation and evacuation, which supports improved surface finish and reduces the likelihood of chip-related interruptions. Is the SX-6E600N04-CF5 WSM33G compatible with standard indexable holders? The SX-6E600N04-CF5 WSM33G fits into holders intended for the corresponding insert designation; correct clamping and geometry alignment are important to achieve the rated performance. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
SX-6E600R6-CE4 WSM33G WSM33G Wendeplatten - Walter Tools
SX-6E600R6-CE4 WSM33G Drehwendeschneidplatte von Walter Tools Die SX-6E600R6-CE4 WSM33G ist eine beschichtete Drehwendeschneidplatte für die produktive Zerspanung von rostfreien Stählen und hitzebeständigen Superlegierungen Tiger·tec Gold Beschichtung für lange Standzeit Optimierte Spanform für sichere Spanbildung Speziell für rostfreie Stähle und Superlegierungen Stabile Schneidkante bei hohen Temperaturen Haltbarkeit und Prozesssicherheit in anspruchsvoller Zerspanung Die Wendeschneidplatte bietet durch die Tiger·tec Gold Beschichtung eine deutlich verbesserte Verschleißfestigkeit und damit längere Einsatzintervalle. Für Anwender bedeutet das weniger Werkzeugwechsel und erhöhte Maschinenauslastung, was die Wirtschaftlichkeit in Serienprozessen steigert. Die Sorte WSM33G wurde speziell für anspruchsvolle Materialien entwickelt und reduziert Ausfallzeiten durch stabile Schneidkanten. Optimierte Spanbildung für schwer zerspanbare Werkstoffe Dank der angepassten Spanform sorgt die Platte für kontrollierte Spanabfuhr, besonders bei rostfreien Stählen (M) und hitzebeständigen Superlegierungen bzw. Titan (S). Das Ergebnis ist eine geringere Neigung zu Aufbauschneiden und eine verbesserte Oberflächengüte. Für Betriebe mit hohen Qualitätsanforderungen bedeutet das reproduzierbare Werkstückqualität und weniger Nacharbeit. Einsatzbereiche und Anwendernutzen Die Wendeschneidplatte eignet sich für Längs- und Querbearbeitung in der Serienfertigung sowie für anspruchsvolle Einzelteile in der Luftfahrt‑ und Energiebranche. Fertigungsleiter profitieren von einer zuverlässigen Performance bei variierenden Schnittbedingungen, während Prozessingenieure die Stabilität der Schneidkante zur Optimierung der Schnittdaten nutzen können. Schneidstoffinformationen leicht verständlich erklärt Die WSM33G ist ein beschichtetes Hartmetall‑Schneidstoffsystem; das bedeutet: ein hartes Grundsubstrat mit einer schützenden Beschichtung für höhere Temperatur‑ und Verschleißbeständigkeit. Beschichtetes Hartmetall reduziert Kantenabrundung und erhöht die Lebensdauer der Platte, was sich direkt in geringeren Stückkosten niederschlägt. Empfehlung: Für maximale Prozesssicherheit die SX-6E600R6-CE4 WSM33G von Walter Tools einsetzen; bei Bedarf technische Beratung oder Zusatzauskunft über info@metav-werkzeuge.com oder Tel. +49 2822 7131930 anfordern Produktmerkmale Artikelnummer: SX-6E600R6-CE4-WSM33G-WALTER Marke: Walter Tools Produktart: Drehwendeschneidplatte Serie: Tiger-tec Gold Daten Besonderheiten Sorte: WSM33G Schneidengeometrie: 6E600R6-CE4 Beschichtung: Tiger·tec Gold Schneidstoffklasse: beschichtetes Hartmetall Bearbeitbare Werkstoffe: M = rostfreie Stähle (zäh, wärmeentwickelnd) Bearbeitbare Werkstoffe: S = hitzebeständige Superlegierungen und Titan (wärmebeständig, schneidkantenbelastend) Anwendung: Schwer zerspanbare Werkstoffe und je nach Geometrie Edelstahl FAQ Welche Werkstoffe lassen sich mit der SX-6E600R6-CE4 WSM33G bearbeiten? Die Wendeschneidplatte ist ausgelegt für rostfreie Stähle (M) und hitzebeständige Superlegierungen/Titan (S). Die Sorte WSM33G unterstützt sichere Spanbildung bei diesen Materialgruppen. Welche Vorteile bietet die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung der SX-6E600R6-CE4 WSM33G erhöht die Verschleißfestigkeit und Temperaturbeständigkeit, was zu längeren Standzeiten und stabileren Prozessen führt. Für welche Anwendungen ist diese Wendeschneidplatte besonders geeignet? Die Platte eignet sich für Serienfertigung und anspruchsvolle Einzelteile in Branchen mit hohen Qualitätsanforderungen, etwa Energie- und Luftfahrtkomponenten, wo rostfreie Stähle und Superlegierungen verarbeitet werden. Wie beeinflusst die Spanform die Bearbeitung? Die optimierte Spanform reduziert Aufbauschneiden und verbessert die Spanabfuhr, was die Oberflächengüte erhöht und die Werkzeugstandzeit verlängert. Welche Information sollte bei der Werkzeugauswahl noch beachtet werden? Bei Auswahl der Schnittdaten sind Werkstückmaterial, Maschine und Kühlmittelführung zu berücksichtigen; die SX-6E600R6-CE4 WSM33G liefert die Grundlagen für stabile Parameter bei rostfreien und hitzebeständigen Werkstoffen. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
SX-8E800N08-CE4 WKP23G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, WKP23G coated‑carbide performance and reliable chip control for consistent, productive machining; order genuine Walter Tools inserts via Metav Werkzeuge or ask the consultants for application advice. SX-8E800N08-CE4 WKP23G Turning/Milling Indexable Insert (Tiger‑tec Gold) – Walter Tools SX-8E800N08-CE4 WKP23G is an indexable insert engineered for productive turning and milling on steel and cast iron, delivering stable chip control and extended tool life under industrial conditions. Tiger‑tec Gold coating for long service life Suitable for steel and cast iron machining Coated carbide grade WKP23G for wear resistance Chipbreaker 8E800N08-CE4 for stable chips Longer tool life through a wear‑resistant coating The insert uses the Tiger‑tec Gold technology in the WKP23G grade, a coated carbide combination optimised for abrasive and adhesive wear during steel and cast iron machining. The result is a clear extension of usable life and fewer insert changes, which directly reduces non‑productive time and tooling costs. The coating improves thermal stability and edge integrity under cyclic loads, enabling more predictable performance when batch sizes or cycle times matter most. In practical terms, less flank wear and better resistance to chipping mean consistent component quality over longer production runs. Reliable chip control for P and K materials Designed with the 8E800N08-CE4 chipbreaker geometry, the insert provides controlled chip formation for ISO groups P (steel) and K (cast iron). The chipbreaker promotes short, manageable chips with turning and light milling feeds, reducing the risk of entanglement and improving surface finish consistency. Since steel and cast iron produce different chip behaviours, the geometry balances these demands to maintain process stability: steady cutting forces, predictable heat generation and reduced need for manual intervention during runs. Process stability and efficient integration in machining cells As an indexable insert suitable for both turning and milling applications, this item integrates into standard Walter Tools toolholders and common clamping systems, facilitating rapid changeovers and simple inventory management. The combination of a robust grade and a proven chipbreaker delivers dependable cutting-edge life and repeatable results across batches. For production environments that prioritise uptime and component repeatability, this insert supports higher machining throughput while helping to maintain consistent dimensional and surface quality. Contact Metav Werkzeuge for tailored application support and secure genuine Walter Tools Tiger‑tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and availability. Technical data SKU: SX-8E800N08-CE4-WKP23G-WALTER Designation: SX-8E800N08-CE4 WKP23G Series: Tiger‑tec Gold Grade: WKP23G Type: Turning/milling indexable insert Manufacturer: Walter Tools Facts ISO material groups: P, K Chipbreaker: 8E800N08-CE4 Material of insert: coated carbide Suitable applications: turning, milling Special features Coating technology: Tiger‑tec Gold Main suitability: Steel, Cast iron Stable chip formation Designed for productive machining FAQ Which materials is the insert suitable for? The SX-8E800N08-CE4 WKP23G insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What advantages does the WKP23G grade offer? WKP23G, in the Tiger‑tec Gold family from Walter Tools, provides enhanced wear resistance and thermal stability compared with standard coated carbides, resulting in longer tool life and more consistent component quality. Which chipbreaker is used and why does it matter? The insert features the 8E800N08-CE4 chipbreaker; this geometry controls chip form for both steel and cast iron, improving surface finish and reducing the risk of chip-related interruptions. Can this insert be used for stainless steel? Stainless steel suitability is not specified for this grade; the SX-8E800N08-CE4 WKP23G is optimised for steel and cast iron, so a grade explicitly developed for stainless applications should be chosen for reliable results. How does this insert contribute to process stability? By combining the Tiger‑tec Gold coating with a tailored chipbreaker, the insert ensures steady cutting forces and predictable wear behaviour, which reduces downtime and supports repeatable machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com