TNMG160408-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WPP10G grade and the MP5 chipbreaker for consistent tool life and controlled chip formation; order the insert directly via Metav Werkzeuge or consult our advisors for application support. TNMG160408-MP5 WPP10G – Indexable turning insert, Tiger‑tec Gold for steel | Walter Tools A TNMG160408-MP5 WPP10G indexable turning insert engineered for robust steel machining, combining Tiger‑tec Gold coated carbide and an MP5 chipbreaker for predictable performance Tiger‑tec Gold coated grade WPP10G MP5 chipbreaker for controlled chip formation Triangle 60° insert with 0.8 mm nose radius Negative 0° rake for robust finishing cuts Maximise productivity with longer tool life The combination of the Tiger‑tec Gold coating and the WPP10G grade delivers a balance between wear resistance and toughness, extending service intervals in serial production. The coated carbide substrate improves thermal stability under the heat typical of steel turning, which reduces flank wear and helps to maintain consistent dimensional accuracy over longer runs. This means fewer tool changes and a steadier production flow for lathes and CNC turning centres. Achieve reliable chip control and surface quality The MP5 chipbreaker is configured to produce short, manageable chips when machining steel, reducing risk to workpiece and toolholder. Controlled chip formation results in less machine downtime for chip clearing and contributes to improved surface finish on the turned component. Combined with the 0.8 mm nose radius, the geometry supports fine surface generation while remaining robust enough for finishing and light semi‑finishing operations. Suited for steel machining according to ISO P This insert is specified for the ISO P material group, i.e. unalloyed and alloyed steel, and is optimised for the heat and chip behaviour characteristic of these materials. The triangle 60° form offers three usable cutting edges per index, while the negative 0° rake contributes to a stronger cutting edge for interrupted cuts and heavier feeds. The specification supports a wide range of turning tasks where predictable performance on steel is required. Designed for precision and repeatability in production environments Tolerance class M together with the standard TNMG geometry ensures consistent seating and repeatable indexing in compatible toolholders. The insert dimensions (size 16, thickness 4.0 mm) and the coated carbide construction are aimed at workshops seeking a productive, low‑maintenance cutting solution. The overall package is suited to manufacturers who prioritise steady throughput and reproducible component quality. For technical selection and ordering of Walter Tools inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to select the right TNMG160408-MP5 WPP10G for steel applications Technical data SKU: TNMG160408-MP5-WPP10G-WALTER Designation: TNMG160408-MP5 WPP10G Manufacturer: Walter Tools Facts Insert size: 16 mm Thickness: 4.0 mm Nose radius: 0.8 mm Geometry: triangle 60° Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP10G (Tiger‑tec Gold coated carbide) Chipbreaker: MP5 Series: Tiger‑tec Gold Suitable for: Steel (ISO P) FAQ What materials is this insert suitable for? The TNMG160408-MP5 WPP10G is optimised for steel machining and targets the ISO P material group, covering unalloyed and alloyed steels. How does the MP5 chipbreaker affect production? The MP5 chipbreaker provides controlled chip formation for safer chip evacuation and more consistent surface finish when turning steel. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating increases thermal stability and wear resistance, which helps to extend tool life and maintain dimensional accuracy. What is the significance of the 0.8 mm nose radius? A 0.8 mm nose radius balances surface finish capability with edge strength, suitable for finishing and light semi‑finishing cuts on steel Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
TNMG160408-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP5 chipbreaker for reliable chip control and extended tool life in steel turning; the triangular 60° geometry with a 0.8 mm corner radius delivers stable cutting performance and repeated results. Order the TNMG160408-MP5 WPP20G turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408-MP5 WPP20G Turning insert — Tiger·tec Gold, for steel — Walter Tools A TNMG160408-MP5 WPP20G turning insert engineered for high-productivity steel turning, featuring the Tiger·tec Gold coating and an MP5 chipbreaker for consistent chip formation. Tiger·tec Gold coating for long tool life MP5 chipbreaker for stable chip formation 0.8 mm corner radius for increased edge strength Triangle 60° insert with 0° negative rake Boosted productivity with Tiger·tec Gold and MP5 chip control The combination of Tiger·tec Gold surface technology and the MP5 chipbreaker is designed to reduce downtime and lower cost per component by extending tool life and stabilising chips during continuous turning of steel (ISO group P). The premium coating reduces flank wear and improves thermal resistance, which means longer intervals between indexings and fewer tool changes. For operations seeking measurable efficiency gains, this geometry supports higher feed rates and reliable material evacuation, translating directly into improved cycle times and predictable output. Durable edge geometry for consistent process security A 0.8 mm corner radius together with the triangular 60° form increases resistance to mechanical shock and vibrations, ensuring a robust cutting edge in interrupted or heavy-engagement turns. The 0° negative rake provides a secure cutting attitude that is especially beneficial when machining tougher steel grades or when stable cutting forces are required. These design choices contribute to repeatable dimensional accuracy and consistent surface finish, reducing rework and enhancing machine utilisation. Practical integration into existing turning systems The insert follows the TNMG designation and the designation code TNMG160408-MP5 aligns with standard holders and clamping systems, enabling straightforward replacement without extensive tooling changes. The grade WPP20G is optimised for steel machining according to ISO 513 (group P), offering a balance between wear resistance and toughness for general-purpose turning. Cutting data can be adapted from standard steel recommendations; choose speeds conservatively at first and increase feed to exploit the chipformer’s stability. This approach simplifies implementation on production lines and aids process optimisation with minimal trial runs. Advice and reliable supply for production environments Walter Tools manufacturing standards and the Tiger·tec Gold family provide process security and consistent tool performance across batches. For application-specific recommendations, adjustments to feeds and speeds, or to confirm compatibility with particular holder systems, expert guidance is available. Technical consultations can help to select the correct insert geometry and grade for a specified steel grade, ensuring that productivity and component quality objectives are met without unnecessary tool wear. Discuss application requirements with Metav Werkzeuge for tailored cutting data and rapid supply of Walter Tools TNMG160408-MP5 WPP20G inserts Technical Data Article number: TNMG160408-MP5-WPP20G-WALTER Manufacturer: Walter Tools Designation: TNMG160408-MP5 WPP20G Specifications Insert form: Triangle 60° Size: 16 Thickness code: 04 Corner radius: 0.8 mm Free cutting angle: 0° (negative) Tolerance class: M Special features Grade / coating: WPP20G (Tiger·tec Gold) Chipbreaker: MP5 Base material group: P (steel) Base designation without grade: TNMG160408-MP5 Series: Tiger-tec Gold FAQ What materials is this insert suited for? The TNMG160408-MP5 WPP20G insert is optimised for steel machining (ISO group P) and designed to handle the typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WPP20G grade increases wear resistance and thermal stability, allowing the insert to maintain cutting edge integrity for longer and thus reducing indexings and tool changes. When should the MP5 chipbreaker be chosen over other chipformers? The MP5 chipbreaker is recommended when stable chip control is needed in general-purpose steel turning, particularly where consistent chips and secure evacuation improve cycle reliability. Can the insert be used in interrupted cuts? Yes; the 0.8 mm corner radius and negative rake enhance resistance to impact, making this insert suitable for interrupted and heavier-engagement turning operations. What information is needed to select cutting data for this insert? Provide the specific steel grade, machine power and rigidity, toolholder type and required surface finish; Walter Tools grade WPP20G and the MP5 chipbreaker will then inform recommended speeds and feeds. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a global portfolio of precision tooling brands and benefits from established product development and quality systems. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered article is original and brand-new from the manufacturer.
TNMG160408-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and a geometry optimised for steel turning to increase process stability and tool life; order original Tiger‑tec Gold inserts via Metav Werkzeuge or contact our consultants for technical advice. TNMG160408-MP5 WPP30G Drehwendeschneidplatte – Tiger‑tec Gold, for Steel (Walter Tools) A TNMG160408-MP5 WPP30G indexable turning insert designed for demanding steel machining, combining a hard‑coated carbide grade with an MP5 chipbreaker for predictable chips and consistent surface finish. Tiger‑tec Gold coating for high wear resistance Grade WPP30G optimised for steel machining MP5 chipbreaker for stable chip control Triangle 60° insert with 0.8 mm corner radius Maximise uptime with a grade engineered for steel The Tiger‑tec Gold WPP30G grade delivers a balance of wear resistance and toughness tailored for the heat and chip formation typical of steel turning. As a coated carbide solution, it reduces flank wear and extends cutting-edge life under continuous machining. The result is fewer tool changes and a more predictable production rhythm, helping plants to maintain cycle times and reduce unplanned downtime. Predictable chip control and process reliability The MP5 chipbreaker geometry provides reliable chips across common steel alloys, improving evacuation and minimising rework. The negative 0° rake and triangular cutting geometry contribute to robust edge strength, making the insert suitable for interrupted cuts and mixed production batches. For operators, this means a lower risk of tool edge failure and more consistent surface quality without needing complex toolpath adjustments. Easy integration and operator benefits With a 60° triangular form and a 0.8 mm corner radius the insert fits many standard turning pockets, simplifying tooling decisions at the machine. The moderate corner radius supports both finishing and light roughing, reducing the need for multiple dedicated grades. Handling and mounting are straightforward, and the coated surface helps maintain dimensional accuracy over longer tool life, translating to fewer set‑ups and less scrap. For application advice on Walter Tools Tiger‑tec Gold inserts or to secure availability and delivery through Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical data Article number: TNMG160408-MP5-WPP30G-WALTER Designation: TNMG160408-MP5 WPP30G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Insert shape: Triangle 60° Size: 16 Corner radius: 0.8 Thickness: 04 Rake: 0° (negative) Chipbreaker: MP5 Grade: WPP30G Tolerance class: M Special features Coated carbide grade (Tiger‑tec Gold) Optimised for steel (P) Robust chip control for mixed machining Suitable for interrupted cuts and general turning FAQ What materials is this insert suitable for? The WPP30G grade is designed for steel machining (ISO group P); the insert performs well on unalloyed and alloyed steels typical in general turning applications. How does the MP5 chipbreaker improve production? The MP5 chipbreaker on the TNMG160408-MP5 reduces long and entangling chips, improving evacuation and consistency; this leads to fewer stoppages and better surface finish during steel turning operations. Can this insert be used for finishing and roughing? With its 0.8 mm corner radius and robust coated edge, the insert supports light roughing and finishing passes, offering flexibility where a single grade is preferred for varying cuts. Is this an original Walter Tools product and where to obtain technical support? The TNMG160408-MP5 WPP30G is an original Walter Tools Tiger‑tec Gold insert; Metav Werkzeuge can provide technical advice, availability and application support. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer.
TNMG160408-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
Achieve reliable, productive turning with a coated carbide grade optimised for steel: the combination of the Tiger·tec Gold technology and the MS3 chipbreaker delivers consistent chip control and extended tool life. Order the insert through Metav Werkzeuge or request specialist advice for process integration. TNMG160408-MS3 WPP20G triangular turning insert, Tiger·tec Gold, for steel — Walter Tools The TNMG160408-MS3 WPP20G is a triangular indexable turning insert designed for steel machining, combining a wear-resistant coating with a chipbreaking geometry for stable, repeatable performance in industrial turning operations. Tiger·tec Gold coating for wear resistance MS3 chipbreaker for stable chip control Triangle 60° form with 0.8 mm corner radius Negative 0° rake for robust cutting Consistent wear resistance for steel machining The coated carbide grade WPP20G, developed within the Tiger·tec Gold series, is formulated for the thermal and mechanical demands of steel turning. As a coated carbide solution, it balances abrasion resistance and toughness to maintain an effective cutting edge across mixed production runs. The specification targets materials classified under ISO 513 as group P, meaning suitability for both unalloyed and alloyed steel. For production planners, this translates into longer tool intervals, fewer insert changes and improved uptime without sacrificing surface quality. Reliable chip control and robust geometry for process security Built with the MS3 chipbreaker and a triangle 60° plate form, the insert promotes controlled chip formation even under variable cutting conditions. The 0.8 mm corner radius increases edge strength where intermittent cuts or heavier depths of cut occur, while the negative 0° rake provides a conservative, robust cutting angle for heavy-duty operations. Together these design choices support stable cutting forces and reduce the risk of edge chipping, which benefits batch production and unattended shifts by lowering scrap rates and rework. Practical integration and handling in workshop environments The insert follows a standard TNMG designation and is supplied in the TNMG160408-MS3 format for compatibility with conventional toolholders designed for this family. The size and thickness codes are provided to ensure correct toolholder selection and seating. Given the universality of the grade for steel, the insert suits both semi-finishing and general-purpose turning tasks, offering a straightforward inventory item for toolrooms focused on predictable, repeatable results. For specific cutting parameter recommendations or material-specific optimisation, Metav Werkzeuge can advise on feeds, speeds and clamping options to ensure best outcomes. For application guidance or to request delivery of the Walter Tools TNMG160408‑MS3 WPP20G insert, contact Metav Werkzeuge for tailored recommendations and prompt processing via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG160408-MS3-WPP20G-WALTER Type: Drehwendeschneidplatte Brand: Walter Tools Designation: TNMG160408-MS3 WPP20G Facts Inscribed circle: 16 mm Plate thickness code: 04 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating / Technology: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MS3 Plate form: Triangle 60° Material application: steel (ISO 513, group P) Series: Tiger‑tec Gold FAQ What materials is this insert suited for? The TNMG160408‑MS3 WPP20G is specified for steel applications (ISO 513 group P), suitable for unalloyed and alloyed steels where thermal load and chip control are typical process factors. How does the MS3 chipbreaker affect performance? The MS3 chipbreaker is engineered to produce short, manageable chips and stable cutting conditions, reducing the likelihood of chip entanglement and improving process security during continuous turning operations. Can this insert be used for finishing as well as roughing? Yes; the balance of wear resistance and edge toughness in the WPP20G grade supports versatile use across semi‑finishing and general‑purpose turning tasks, depending on selected feeds and speeds. What does the negative 0° rake provide in practice? A negative 0° rake offers a robust cutting geometry that tolerates heavier depths of cut and intermittent engagement, enhancing edge strength and reducing susceptibility to chipping in demanding cuts. Is the TNMG160408‑MS3 compatible with standard TNMG toolholders? The insert follows the TNMG160408 designation and is intended for standard toolholders that accept TNMG inserts; verify seat style and clamping compatibility prior to installation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names, including Walter Tools, are used for explanation only and do not indicate any affiliation. The offered article is an original factory‑new product of the manufacturer.
TNMG160408-MS3 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger-tec Silver performance, the WSM01 grade tailored for rostfreier Stahl and heat-resistant alloys, and reliable chip control for stable, cost-effective production. Order the TNMG160408-MS3 WSM01 indexable turning insert directly via Metav Werkzeuge or ask the consultants if needed. TNMG160408-MS3 WSM01 – Indexable turning insert, Tiger-tec Silver, Walter Tools The TNMG160408-MS3 WSM01 is an indexable turning insert engineered for demanding turning operations on rostfreier Stahl and high-temperature alloys, offering a 60° triangle form with a robust chipforming geometry. Tiger-tec Silver coating for wear resistance WSM01 grade for rostfreie Stähle and superalloys Triangle 60° shape for versatile turning MS3 chipbreaker for secure chip control High-performance cutting for difficult-to-machine alloys The Tiger-tec Silver series combined with the WSM01 coated-carbide grade is specified for machining rostfreier Stahl and heat-resistant superalloys where edge stability and thermal resistance are critical. The coating and grade interaction reduces flank wear and supports a stable cutting edge, which translates into longer tool life and fewer index changes per batch. In practical terms, this means more consistent cycle times and fewer interruptions for tool handling in serial and batch production. The material compatibility covers the ISO groups indicated by the tool data, ensuring the insert is suitable where toughness, high temperature and adhesive wear are challenges. Reliable chip control and consistent surface quality The MS3 chipbreaker geometry and the 60° triangle form create predictable chip shapes and evacuation even under interrupted cuts. The insert’s 0.8 mm corner radius helps to combine edge strength with the capability to achieve acceptable surface integrity in finish and semi-finish passes. A 0° negative rake provides robustness during heavy cuts and in less rigid setups, reducing the risk of edge chipping and contributing to repeatable dimensional results. These characteristics support reduced rework rates and improved first-pass yield in turning operations. Practical advantages for production planning and tool handling Designed as an indexable insert, the component’s standardised mounting and the compact inscribed circle simplify toolholder selection and changeover processes. Key dimensional references such as the inscribed circle 16 mm and thickness 04 enable straightforward BOM entries and spare-part management. The tolerance class M and execution G indicate consistent manufacturing quality and fit for standard toolholders. Together, these attributes lower administrative friction and support lean tooling strategies through predictable consumable consumption and easier inventory control. Process security and brand-backed performance As part of the Walter Tools portfolio, this insert benefits from a product family focused on stable edge geometry and improved manufacturability. The Tiger-tec Silver series is engineered to balance wear resistance and edge toughness, supporting high process stability and consistent results across shifts. For production lines where uptime and repeatability are valued, the combination of grade, chipforming and insert geometry provides a measurable contribution to productivity and process reliability. Protected trademarks and trade names are the property of their respective owners; there is no affiliation between Metav Werkzeuge and the named brands, and the article is offered as original factory-new goods of the manufacturer. Contact Metav Werkzeuge for application advice or to request cutting data for the Tiger-tec Silver TNMG160408-MS3 WSM01 insert; consultants at Metav Werkzeuge can advise on toolholder pairing and cutting parameters to integrate this insert efficiently into existing turning processes Technical Data Article number: TNMG160408-MS3-WSM01-WALTER SKU: TNMG160408-MS3-WSM01-WALTER Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM01 Designation: TNMG160408-MS3 WSM01 Facts Inscribed circle: 16 mm Corner radius: 0.8 mm Free angle: 0° (negative) Plate thickness: 04 Tolerance class: M Special features Triangle 60° insert form MS3 chipbreaker geometry Material compatibility: S / M Application focus: rostfreier Stahl and heat-resistant superalloys Execution: G FAQ What materials is this insert suited for? The TNMG160408-MS3 WSM01 is designed for rostfreier Stahl and high-temperature superalloys (ISO groups M and S), offering edge stability for tough, heat-prone materials. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker on this Tiger-tec Silver insert promotes predictable chip formation and evacuation, improving process security and reducing the likelihood of built-up edge during continuous turning. Which insert geometry ensures flexibility in turning tasks? The triangle 60° shape combined with a 0.8 mm corner radius provides a balance between approach versatility and edge strength, suitable for a range of turning operations from semi-finish to finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TNMG160408-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant cutting grade, a stable chip control geometry and a compact triangular form for reliable machining of stainless steels and superalloys. Order the insert directly via Metav Werkzeuge or ask their consultants for tailored cutting data and stock information. TNMG160408-MS3 WSM10S triangular indexable insert, Tiger·tec Silver coating — Walter Tools A TNMG160408-MS3 WSM10S triangular indexable insert engineered for turning operations in stainless steels (M) and heat-resistant superalloys (S), offering improved edge stability and consistent chip formation. Tiger·tec Silver coating for extended tool life Optimised MS3 chipbreaker for stable chip control Triangle 60° shape with 0.8 mm corner radius Suited for stainless steels (M) and superalloys (S) Confident cutting in stainless and high-temperature alloys The WSM10S grade, part of the Tiger·tec Silver series, is formulated for demanding materials that cause high temperatures and tend to form built-up edge. The coated cemented carbide composition provides a stable cutting edge and improved thermal resistance, which reduces premature flank wear during extended cuts. This results in fewer interruptions for tool changes and a more predictable process window when turning stainless steels and nickel- or cobalt-based alloys. Geometry and chip control that protect productivity The triangular 60° insert geometry combined with the MS3 chipbreaker and a 0.8 mm corner radius offers a balance between strength and repeatable cutting performance. The insert’s 0° relief (negative rake) increases edge robustness in interrupted cuts or heavy-depth passes, while the chipbreaker guides chips away from the cutting zone to reduce re-cutting and surface damage. These features lower the risk of workpiece scarring and help maintain cycle times in batch production. Practical benefits for stable series production Configured for process reliability, this insert supports continuous operation with consistent surface quality and extended intervals between tool changes. The combination of a coated grade and robust geometry delivers measurable advantages in tool life and machine uptime, translating into a lower cost per component in medium to large production runs. In practice, that means fewer unplanned stops, more predictable tool performance and a directly positive effect on throughput. Contact Metav Werkzeuge for application-specific recommendations and immediate availability of Walter Tools inserts; technical advice and cutting data are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number / SKU: TNMG160408-MS3-WSM10S-WALTER Designation: TNMG160408-MS3 WSM10S Product type: Indexable turning insert (triangular) Manufacturer / Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Core specifications Insert size: 16 mm Corner radius: 0.8 mm Relief angle: 0° (negative) Thickness: 04 Insert form: Triangle 60° Tolerance class: M Special features Chipbreaker: MS3 Coating: Tiger·tec Silver technology Material applicability: S / M Typical application: Machining of stainless steels and heat-resistant superalloys Robust edge geometry for interrupted cuts FAQ What materials is this insert best suited for? The TNMG160408-MS3 WSM10S insert is designed primarily for stainless steels (M) and heat-resistant superalloys (S), providing improved edge life under high temperatures. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker promotes controlled chip formation and evacuation, reducing chip-related interruptions and supporting a consistent surface finish when using the Walter Tools turning inserts. Is the 0° relief angle suitable for heavy cuts? A 0° (negative) relief increases edge strength and resistance to chipping, making the insert appropriate for interrupted or heavier turning operations where robustness is required. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal stability and wear resistance, which extends tool life and contributes to predictable, repeatable performance in production environments. Can this insert be rotated to present multiple cutting edges? The triangular 60° form allows indexed use of multiple cutting edges; correct indexing preserves the intended corner radius and cutting geometry for sustained productivity. Manufacturer: Walter AG (Walter Tools); Headquarters: Tübingen, Germany. Protected trademarks and product names remain the property of their respective owners. Brand names are used here for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is original and brand-new.
TNMG160408-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, the Tiger·tec Gold coating and the WPP05G grade for efficient steel turning and predictable tool life; order directly via Metav Werkzeuge or consult our experts for tailored cutting data. TNMG160408-MU5 WPP05G turning indexable insert — Tiger·tec Gold, for steel (Walter Tools) The TNMG160408-MU5 WPP05G is a triangular 60° coated carbide insert from the Tiger·tec Gold series, optimised for turning unalloyed and alloyed steel in ISO P applications with a robust MU5 chipbreaker. Tiger·tec Gold coating for extended tool life Grade WPP05G optimised for steel machining Triangle 60° geometry with 0.8 mm corner radius Negative 0° rake for stable, interrupted cuts Greater productivity through optimised grade and coating The coated carbide grade from the Tiger·tec Gold family delivers a measurable improvement in process stability and tool life. The combination of the WPP05G grade and advanced coating technology reduces flank wear and delays crater formation under typical steel turning conditions, which directly increases uptime and lowers cost per component. The insert’s MU5 chipbreaker promotes controlled chip formation for a wide range of cutting parameters, enabling higher metal removal rates without sacrificing surface quality. Predictable performance and repeatable results Built for consistent behaviour in serial production, the insert’s triangle 60° shape and 0.8 mm corner radius provide a reliable cutting edge with good strength for general turning operations. The negative 0° rake increases edge robustness, especially in interrupted cuts or when light roughing is required. Thanks to the coating and substrate combination, users can expect stable wear patterns and repeatable part dimensions, supporting process standardisation and easier tool-life forecasting on the shop floor. Practical application and selection guidance This indexable insert is primarily suitable for machining tasks in the ISO P material group, covering unalloyed and alloyed steel commonly used in general engineering. The geometry and chipbreaker make it a versatile choice for roughing to semi-finishing operations. For customers seeking exact cutting data or optimisation for specific steels and machine setups, Metav Werkzeuge provides application support and can supply recommended speeds, feeds and holder recommendations to match individual production requirements. Contact Metav Werkzeuge GmbH for tailored cutting parameters, sample orders or application advice on the TNMG160408-MU5 WPP05G from Walter Tools: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: TNMG160408-MU5-WPP05G-WALTER Label: Drehwendeschneidplatte TNMG160408-MU5 WPP05G Walter Tools Manufacturer: Walter Tools Product type: Turning indexable insert ISO designation: TNMG160408-MU5 WPP05G Facts Insert size: 16 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP05G (coated cemented carbide) Chipbreaker: MU5 Shape: Triangle 60° Material suitability: Steel (ISO P) FAQ What materials is this insert suitable for? The TNMG160408-MU5 WPP05G is designed for the ISO P group, meaning it is suitable for machining unalloyed and alloyed steel. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the WPP05G grade improves wear resistance and thermal stability, which helps the insert maintain cutting performance and extend service life under demanding steel-cutting conditions. What cutting tasks suit the MU5 chipbreaker? The MU5 chipbreaker on this insert supports controlled chip formation for roughing to semi-finishing operations, providing reliable chips and consistent surface quality in steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
TNMG160408-MU5 WPP10G Wendeplatten - Walter Tools
High wear resistance and broad applicability for steel combine with a robust triangular geometry and MU5 chip control to deliver stable, productive turning cycles; benefit from the Tiger‑tec Gold WPP10G grade for longer tool life and consistent results. Order the TNMG160408-MU5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408-MU5 WPP10G indexable turning insert — Tiger‑tec Gold coating, for steel — Walter Tools The TNMG160408-MU5 WPP10G is a 60° triangular indexable insert with a MU5 chipbreaker, developed for reliable turning of steel and engineered to deliver consistent performance across general machining applications. Tiger‑tec Gold coated grade WPP10G MU5 chipbreaker for reliable chip control Triangle 60° form with 0.8 mm corner radius Negative rake 0° for heavy cuts Consistent performance in steel machining The Tiger‑tec Gold grade WPP10G is a coated cemented‑carbide solution tailored for ISO P materials (steel). Its formulation promotes stable wear behaviour and a broad material coverage that balances hardness and toughness; this results in longer edge life under the thermal and mechanical loads typical of steel turning. For production environments seeking predictable tool change intervals, the coated grade reduces downtime and supports higher machine utilisation. Robust geometry for reliable cutting forces The triangular 60° form offers three usable cutting edges per insert and, combined with a 0.8 mm corner radius, provides a good compromise between edge strength and achievable radii on the workpiece. The negative 0° rake increases insert strength for interrupted cuts and heavy depths of cut, helping to maintain dimensional stability under load. This geometry is particularly suited to medium to heavy turning operations where edge robustness is a priority. Controlled chips and improved surface quality The MU5 chipbreaker is optimised for machining steel and promotes predictable chip formation across a range of feeds. Controlled chip flow reduces rework risk and improves workplace safety, while consistent cutting conditions help to achieve repeatable surface finishes. For operators less familiar with fine tuning, the combination of the MU5 breaker and the Tiger‑tec Gold grade simplifies set‑up and yields trustworthy surface integrity across batches. Process reliability and handling advantages Tolerance class M and the standard insert dimensions (size 16, thickness 04) support compatibility with a wide range of toolholders and turning systems, easing inventory standardisation. The coated grade’s emphasis on stable edge behaviour contributes to process security and repeatable part quality, which is beneficial for both job shops and volume production. Choosing this insert supports predictable machining cycles and efficient tool management. For high‑performance turning with Walter Tools’ Tiger‑tec Gold grade, contact Metav Werkzeuge for ordering and technical advice — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data SKU: TNMG160408-MU5-WPP10G-WALTER Designation: TNMG160408-MU5 WPP10G Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 16 Thickness: 04 Corner radius: 0,8 Shape: Triangle 60° Relief angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MU5 Grade: WPP10G (coated cemented carbide, Tiger‑tec Gold) Application: Steel (ISO P) Three usable cutting edges Robust edge geometry for interrupted and heavy cuts FAQ What materials is this insert designed to machine? The TNMG160408-MU5 WPP10G insert is formulated for ISO P materials; it is intended primarily for the machining of steel and similar unalloyed and alloyed steels. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on the TNMG160408-MU5 WPP10G promotes controlled chip formation when turning steel, improving surface finish consistency and reducing the risk of entangling chips. What benefits does the Tiger‑tec Gold grade provide? The Tiger‑tec Gold WPP10G grade offers a balanced combination of wear resistance and toughness for stable wear behaviour, resulting in extended edge life and consistent machining performance. Is this insert suitable for interrupted cuts? Yes; the triangle form with a 0.8 mm corner radius and the 0° negative rake angle give the insert enhanced edge strength, making it suitable for interrupted and heavier cutting conditions. Which toolholders are compatible with this insert geometry? The TNMG160408-MU5 WPP10G uses the standard TNMG‑style interface and is compatible with holders designed for 60° triangular inserts and the stated size and thickness. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TNMG160408-MU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, an MU5 chipbreaker tuned for steel and the stable triangular geometry to increase throughput and reduce tool change frequency; order directly via Metav Werkzeuge or ask the consultants for machining recommendations. TNMG160408-MU5 WPP20G indexable turning insert (Tiger·tec Gold) by Walter Tools TNMG160408-MU5 WPP20G is an indexable turning insert designed for reliable steel machining in industrial turning applications *Tiger·tec Gold coating for extended tool life *MU5 chipbreaker optimised for steel machining *Triangle 60° insert, 0.8 mm corner radius *Negative 0° rake for stable cutting High wear resistance for demanding steel operations The TNMG160408-MU5 WPP20G combines a modern Tiger·tec Gold coating with a coated carbide substrate to deliver outstanding resistance to flank and crater wear during continuous turning of steel. The WPP20G grade is developed for the thermal and mechanical conditions typical of steel machining and offers a balanced mix of hardness and toughness for long tool life. For production environments seeking lower tooling costs per part, this grade supports sustained performance across varying feed rates and depths of cut without premature edge failure. Geometry crafted for dependable chip formation and surface finish The triangular 60° shape together with the MU5 chipbreaker produces a controlled chip flow that reduces vibration and improves surface integrity. The defined 0.8 mm corner radius provides a robust cutting edge that helps avoid micro-chipping when interrupted cuts occur, while the negative 0° rake angle increases edge stability for heavy or roughing passes. These geometrical choices result in repeatable part quality and predictable tool behaviour, simplifying process planning and reducing scrap rates. Increased process security and economical machining Using a grade optimised for steel means fewer unexpected tool changes and more consistent cycle times. The coated substrate of the insert reduces adhesive wear and increases resistance to built-up edge formation, which in turn maintains dimensional accuracy over longer tool life. Stability of the cutting edge and the insert’s tolerance class M ensure reliable positioning in standard indexable holders, supporting higher uptime and lower unit costs — measurable benefits for batch production and continuous turning lines. Application guidance and compatible setups This insert is suited to general turning applications on unalloyed and alloyed steels in accordance with ISO P material groups. The combination of the MU5 chipbreaker and triangular 60° form is particularly effective for medium to heavy cuts where chip control and edge robustness are priorities. The insert is compatible with standard TNMG toolholders; selection of appropriate clamping torque and holder rigidity will preserve the insert’s performance and contribute to stable cutting conditions. For tailored recommendations, material-specific feeds and speeds can be provided by Metav Werkzeuge’s technical team. For machining projects that demand consistent, economical results from Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for application advice and ordering — Metav Werkzeuge can assist with compatibility checks and delivery options. Technical data Article number / SKU: TNMG160408-MU5-WPP20G-WALTER Product designation: TNMG160408-MU5 Full designation: TNMG160408-MU5 WPP20G Manufacturer: Walter Tools Numbers / core technical data Corner radius: 0.8 mm Insert size: 16 Thickness code: 04 Rake angle: 0° (negative) Tolerance class: M Designs / special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: MU5 Substrate: coated carbide Material application: steel (ISO P) Insert shape: triangle 60° FAQ What materials is this insert suitable for? The TNMG160408-MU5 WPP20G insert is formulated for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold technology are optimised for the thermal and chip-forming characteristics of steel. How does the MU5 chipbreaker influence performance? The MU5 chipbreaker promotes controlled chip formation and evacuation in turning operations, improving surface quality and reducing the risk of built-up edge when machining steel. What does the 0.8 mm corner radius mean for cutting? A 0.8 mm corner radius increases edge strength and resistance to chipping, making the insert suitable for interrupted cuts and applications where a robust cutting edge is required. Is this insert compatible with standard TNMG toolholders? Yes, the insert conforms to the TNMG form and tolerance class M, and is compatible with standard toolholders designed for TNMG inserts; correct clamping and holder rigidity are essential for best results. Can this grade be used for finishing passes? While the insert performs well across a range of cuts, the WPP20G grade provides a balance of wear resistance and toughness suitable for both roughing and medium finishing on steel; final fine finishing may benefit from a smaller corner radius or a grade explicitly tuned for fine surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
TNMG160408-MU5 WSM20S MU5 Wendeplatten - Walter Tools
Take advantage of the combination of high process security, robust chip control and long tool life for reliable turning in stainless steel and heat-resistant alloys; order the inserts via Metav Werkzeuge or contact our consultants for application advice. TNMG160408-MU5 WSM20S — indexable turning insert for stainless steel and superalloys (Walter Tools) The TNMG160408-MU5 WSM20S is a triangular indexable turning insert designed for heavy-duty machining of stainless steel and heat-resistant superalloys. Tiger·tec Silver coating for stable cutting Optimised MU5 chipbreaker for secure chip control Suited for stainless steel and nickel‑based alloys Triangle 60° insert with 0.8 mm corner radius High-performance cutting for stainless steel and superalloys The WSM20S grade, based on Tiger·tec Silver technology, is formulated to cope with the thermal and mechanical stresses typical of stainless steel and heat‑resistant superalloys. The coated carbide construction supports a stable cutting edge under high temperatures and reduces the risk of built-up edge, which translates into fewer interruptions and more predictable machining cycles. This stability benefits cycle times and repeatability, making the insert suitable for production environments where consistent output is critical. Robust geometry and chip management for uninterrupted productivity The combination of the MU5 chipbreaker and a triangle 60° form provides controlled chip formation and evacuation during medium to heavy turning operations. The 0° negative free angle and a 0.8 mm corner radius contribute to a strong cutting edge that resists chipping during interrupted cuts and plunge operations. With a plate size of 16 and a plate thickness of 04, the insert offers mechanical strength and clamping security, helping to maintain cutting parameters and avoid unexpected tool changes. Durable coating and consistent edge quality to reduce rework The insert’s Tiger·tec Silver coating improves wear resistance and thermal stability, delivering longer edge life and steadier surface finishes. A tolerance class of M ensures dimensional consistency between inserts, aiding tool setup and repeatable results across batches. These characteristics reduce the frequency of rework and inspection, supporting lean production goals and lowering per‑part machining costs while preserving component quality. Contact Metav Werkzeuge for application guidance and secure procurement of Walter Tools TNMG160408-MU5 WSM20S inserts for demanding stainless steel and superalloy machining tasks Technical data Article number: TNMG160408-MU5-WSM20S-WALTER Product name: TNMG160408-MU5 WSM20S Walter Tools Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Size: 16 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Materials & features Grade / series: WSM20S — Tiger·tec Silver Chipbreaker: MU5 Suitable for: stainless steel (M), heat‑resistant superalloys / titanium (S) Execution / geometry: G Coated cemented carbide FAQ What materials is this insert suitable for? The TNMG160408-MU5 WSM20S insert is designed for machining stainless steel and heat‑resistant superalloys (ISO groups M and S), offering stable chip control and thermal resistance. Which chipbreaker does the insert feature and why is it important? This insert uses the MU5 chipbreaker; it is optimised for secure chip formation and evacuation, improving process reliability and reducing the likelihood of built‑up edge on the cutting edge. How does the Tiger·tec Silver coating benefit performance? The Tiger·tec Silver coating on the WSM20S grade increases wear resistance and thermal stability, prolonging edge life and helping to maintain consistent surface quality across longer production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered article is original, new and supplied by the manufacturer.
TNMG160408-MW5 WKK10S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating and the WKK10S grade delivers extended wear resistance and stable chip control for cast-iron turning; the triangular 60° design with MW5 chipbreaker and a 0.8 mm corner radius provides multiple cutting edges and consistent performance. Order the TNMG160408-MW5 WKK10S directly via Metav Werkzeuge or consult the team for application advice. TNMG160408-MW5 WKK10S — Turning insert, Tiger·tec Silver, for cast iron — Walter Tools A TNMG160408-MW5 WKK10S triangular turning insert designed for productive machining of cast iron, combining a wear-resistant coating with a robust chipbreaker and neutral-to-negative rake. Tiger·tec Silver coating for extended tool life WKK10S grade optimised for cast iron machining Triangle 60° with 0.8 mm corner radius MW5 chipbreaker for stable chip formation Longer tool life and consistent wear performance for cast-iron turning The combination of the Tiger·tec Silver coating and the WKK10S carbide grade is engineered to resist abrasive wear typical of cast iron machining. The advanced coating reduces flank and crater wear while maintaining edge stability under interrupted cuts. For production environments where predictable tool life is essential, this turning insert offers a measurable improvement in process consistency. The improved wear behaviour means fewer insert changes and less unplanned downtime, which contributes directly to shop-floor productivity and lower operating cost per component. Geometry and cutting-edge strength that support reliable productivity The triangular 60° geometry provides three usable cutting corners per insert, extending usable life before indexing. A 0.8 mm corner radius increases edge robustness for roughing and general-purpose turning, while the 0° (negative) relief angle yields a neutral-to-strengthened cutting edge suited to tough, brittle cast-iron chips. The integrated MW5 chipbreaker is tuned for the short, brittle chips produced from cast iron, promoting secure chip control and reduced risk of chip entanglement. The result is a stable cutting process that supports higher feed rates and steady surface finishes. Practical benefits in process engineering and shop-floor handling Using a graded insert with a defined chipbreaker and coating simplifies process set-up: the geometry supports repeatable results on typical cast-iron grades, while the coating extends performance across batch runs. The insert’s designation and series make it straightforward to match to tooling holders and machine capability, enabling quick substitutions during scheduled maintenance. For engineers seeking to reduce variation, the combination of coating technology and chip control lowers scrap rates and stabilises cycle times, supporting reliable throughput in turning centres and lathes. Clear application guidance and material compatibility This insert is specified for cast iron workpieces (material group K) and is delivered in the recognised TNMG format for triangular indexable inserts. Its MW5 chipbreaker and the Tiger·tec Silver technology make it particularly suitable for abrasive and discontinuous cast-iron surfaces. When selecting cutting parameters, favour conservative depth of cut and appropriate feed to exploit the insert’s edge strength; consult tooling tables or Metav Werkzeuge for suggested starting values. The indexable design provides straightforward re-use of toolholders and predictable inventory management. For tailored application advice or batch enquiries regarding the Walter Tools TNMG160408-MW5 WKK10S insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and ordering support Technical data SKU: TNMG160408-MW5-WKK10S-WALTER Designation: TNMG160408-MW5 WKK10S Product type: Turning insert Series: Tiger·tec Silver Manufacturer: Walter Tools Execution: G Core data Inscribed circle: 16 mm Corner radius: 0.8 mm Thickness code: 04 Relief angle: 0° (negative) Tolerance class: M Shape angle: 60° Special features Grade: WKK10S Chipbreaker: MW5 Coating: Tiger·tec Silver Material group: K (cast iron) Suitable for cast iron machining Shape: Triangle 60° ISO designation: TNMG160408-MW5 WKK10S FAQ What materials is this insert intended for? The TNMG160408-MW5 WKK10S insert is designed for machining cast iron (material group K) and performs best where short, brittle chips are expected. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating on the WKK10S grade reduces abrasive wear and improves edge stability, extending service life of the turning insert in abrasive cast-iron operations. What is the significance of the MW5 chipbreaker? The MW5 chipbreaker is tuned to control the short, fractured chips typical of cast-iron turning, improving chip evacuation and reducing the chance of chip-related issues in the machining zone. How many cutting edges are available per insert? The triangular 60° geometry gives three indexable cutting corners, allowing multiple repositions before disposal. Is this insert compatible with standard TNMG toolholders? Yes, the insert follows the TNMG ISO designation and fits holders specified for TNMG inserts; verify holder compatibility and clamping style before installation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is among the global leaders in precision cutting tools for metalworking and forms part of a recognised group of tool manufacturers. Protected trademarks and trade names remain the property of their respective owners. The offered item is an original, factory-new product from the manufacturer.
TNMG160408-MW5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven MW5 chipbreaker and a robust 0.8 mm corner radius for reliable, economical turning of steels; order or request advice via Metav Werkzeuge for fast availability and application support. TNMG160408-MW5 WPP10G indexable turning insert by Walter Tools — Tiger·tec Gold, for steel The TNMG160408-MW5 WPP10G is a triangular indexable insert designed for productive steel turning with a Tiger·tec Gold coated cutting grade. Tiger·tec Gold coated for long tool life MW5 chipbreaker for controlled chip formation Triangular 60° shape for three cutting edges 0.8 mm corner radius for stable cutting edge Maximise throughput with a high-performance grade The Tiger·tec Gold coating and the WPP10G grade deliver a balance of wear resistance and toughness optimised for machining steel (material group P). The coated carbide composition provides consistent performance under the thermal and mechanical loads typical of steel turning, which translates into longer tool life and fewer indexings. This behaviour reduces downtime and contributes to a more continuous production flow, while the MW5 chipbreaker supports predictable chip formation and evacuation. The combination of coating and chip control therefore enhances process stability and overall cost-efficiency. Precise geometry for stable cuts and repeatable results The insert’s triangular 60° shape offers three usable cutting edges, enabling quick rotation and economical usage. The 0.8 mm corner radius supports a robust cutting edge that tolerates light interruptions and provides a good surface finish without demanding excessive feed rates. The negative rake (0°) geometry increases edge strength for demanding cuts, and the tolerance class M ensures consistent seat fit and repeatable positioning in toolholders. These geometric attributes reduce vibration susceptibility and help to maintain dimensional accuracy in serial turning operations. Practical application and benefits for workshop environments Designed for cutting operations on unalloyed and alloyed steels, this indexable insert suits turning applications where a reliable wearing behaviour and good surface quality are required. The insert designation indicates its base geometry and chipbreaker: the format supports straightforward selection for lathes and turret tooling systems used in production workshops. With clear specification of the grade and chip control, engineering teams can plan inserts into process windows with confidence and document predictable tool-change intervals for maintenance scheduling. Contact Metav Werkzeuge to review process parameters and confirm suitability of the Walter Tools TNMG160408-MW5 WPP10G for the specific steel grades in use and to arrange availability Technical Data SKU: TNMG160408-MW5-WPP10G-WALTER Label: Drehwendeschneidplatte TNMG160408-MW5 WPP10G Walter Tools Product type: Drehwendeschneidplatte Numbers / Core Technical Data Size: 16 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: M Special features / Versions Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: MW5 Shape: Dreieck 60° Material group suitability: P (steel) Execution: G Designation without grade: TNMG160408-MW5 ISO designation: TNMG160408-MW5 WPP10G FAQ What materials is this insert suitable for? The TNMG160408-MW5 WPP10G is formulated for machining steel (material group P) and is optimised for the thermal and chip-formation characteristics encountered with unalloyed and alloyed steels. How does the MW5 chipbreaker affect performance? The MW5 chipbreaker promotes controlled chip formation and safe evacuation when turning steel, which supports consistent surface finish and reduces the risk of chip entanglement. How many cutting edges are available per insert? The triangular 60° geometry provides three usable cutting edges per insert, allowing economical rotation and extended productive life. Is the insert suitable for interrupted cuts? The 0.8 mm corner radius and negative rake contribute to a robust edge that handles light interruptions more reliably than finer radii, improving edge stability in demanding operations. What does the Tiger·tec Gold designation mean for wear behaviour? Tiger·tec Gold indicates a coated carbide technology optimised for a combination of wear resistance and toughness, leading to stable cutting-edge life in steel turning applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160408-MW5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, a proven MW5 chipbreaker and precise triangular geometry for efficient steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. TNMG160408-MW5 WPP20G – Turning insert with Tiger·tec Gold coating (Walter Tools) The TNMG160408-MW5 WPP20G is a 60° triangular turning insert designed for reliable ISO P (steel) machining with a negative 0° rake angle and an optimised chipbreaker for stable cutting results Tiger·tec Gold coating for reliable tool life Suitable for machining steel (ISO P) MW5 chipbreaker for stable chip control 60° triangle with 0.8 mm corner radius Consistent performance for modern steel turning The insert features a WPP20G coated-carbine grade developed under the Tiger·tec Gold technology, which balances wear resistance and toughness for a broad range of steel applications. This coating improves thermal and oxidative resistance during interrupted cuts and high material removal rates, helping to maintain a consistent edge life. As a result, production runs benefit from fewer tool changes and more predictable component tolerances, supporting efficient process planning and lower unit costs. Geometry that ensures predictable chip form and surface quality With a MW5 chipbreaker and a triangular 60° shape, the geometry promotes controlled chip formation and evacuation for typical turning operations. The 0° negative rake angle adds strength to the cutting edge for robustness in heavier cuts, while the 0.8 mm corner radius supports repeatable edge geometry for good surface finish on turned parts. These design choices reduce chatter risk and simplify parameter selection on a variety of tool holders, enabling stable machining even under changing cutting conditions. Practical advantages and recommended use Designed primarily for steel (ISO P), the insert’s specification — including insert size and thickness codes — allows straightforward integration into common turning tool systems. The MW5 breaker offers flexible performance across finishing to medium roughing tasks, reducing the need for multiple grade changes. For production environments seeking a balance of tool life and process security, this solution delivers predictable wear behaviour and consistent workpiece quality, making it suitable for both batch production and continuous turning operations. Contact Metav Werkzeuge for tailored recommendations on cutting data, holder compatibility and order processing for Walter Tools turning inserts Technical data Article number: TNMG160408-MW5-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG160408-MW5 WPP20G Walter Tools Product type: Turning insert Facts Insert form: Triangle 60° Corner radius: 0.8 Plate size: 16 Plate thickness: 04 Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MW5 Material application: Steel (ISO P) Manufacturer: Walter Tools FAQ Which materials is this insert intended for? The TNMG160408-MW5 WPP20G insert is specified for steel (ISO P) applications and its WPP20G grade is optimised for the thermal and chip-formation behaviour typical of steels. What benefit does the MW5 chipbreaker offer? The MW5 chipbreaker on this Walter Tools insert generates short, controllable chips and supports consistent evacuation, which improves process reliability and surface finish during turning. Is the 0° rake angle suitable for heavy cuts? A 0° (negative) rake angle increases cutting edge strength; the TNMG160408-MW5 WPP20G therefore performs reliably in more demanding cuts and interrupted operations. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances wear resistance and thermal stability, extending edge life and enabling higher productivity across a range of steel turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
TNMG160408-NMS WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating and the WSM10S grade for thermal stability and long tool life, together with a robust triangular geometry that ensures predictable chip control and surface finish; order directly via Metav Werkzeuge or request tailored consultancy for application-specific recommendations. TNMG160408-NMS WSM10S — triangular turning insert, Tiger·tec Silver grade by Walter Tools The TNMG160408-NMS WSM10S is a coated triangular turning insert designed for heavy-duty machining of stainless steels and heat‑resistant superalloys, offering a negative rake geometry for enhanced edge strength. Tiger·tec Silver coating for thermal stability Grade WSM10S optimised for M and S materials Triangular 60° insert with 0.8 mm corner radius Negative 0° rake for robust cutting edges Consistent performance on stainless and high‑temperature alloys The combination of the WSM10S grade and the Tiger·tec Silver coating targets the typical challenges of machining stainless steels and heat‑resistant alloys: high cutting temperatures, material toughness and tendency to form built‑up edge. The coated carbide composition provides improved heat resistance and wear control, which translates into longer edge life and fewer insert changes. This increases process stability and reduces downtime in production environments that demand repeatable, predictable tool behaviour. Geometry that prioritises edge strength and chip control The insert’s triangular 60° form with a 0.8 mm corner radius and a negative 0° rake is configured to maximise flank support and minimise chipping under interrupted cutting or heavy cross‑sections. The NMS chipbreaker promotes stable chip formation and evacuation, which helps maintain surface quality and reduces the risk of rework. These features together provide a reliable balance between cutting force capacity and surface finish in demanding turning operations. Shop‑floor benefits: predictable cycles and fewer interruptions Designed for use across ISO groups M and S, this insert supports efficient machining of rostfreier Stahl and high‑temperature superalloys, allowing fewer tool requalifications and more consistent cycle times. The stable cutting edge and coating technology contribute to economic tool life in continuous production, meaning fewer insert changes and lower process variability. For operations focused on throughput and repeatability, this insert delivers measurable gains in productivity and process safety. For tailored advice on integrating Walter Tools inserts into production or to request availability through Metav Werkzeuge, contact Metav Werkzeuge for expert consultation and order coordination Technical data Article number: TNMG160408-NMS-WSM10S-WALTER Item designation: TNMG160408-NMS WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Plate size: 16 Corner radius: 0,8 Plate thickness: 04 Plate form: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: NMS Grade: WSM10S (coated carbide) Coating: Tiger·tec Silver Material suitability: S / M (heat‑resistant alloys, stainless steels) Application focus: heavy‑duty and difficult‑to‑cut materials FAQ Which materials is this insert suitable for? The TNMG160408‑NMS WSM10S insert is developed for rostfreier Stahl (ISO M) and heat‑resistant superalloys and titanium (ISO S), providing thermal stability and controlled chip formation for these groups. What are the advantages of the WSM10S grade? WSM10S is a coated carbide grade within the Tiger·tec Silver family that offers improved heat resistance and wear control, enhancing edge life and reducing the frequency of insert changes in demanding turning applications. What chipbreaker does the insert use and why is it important? The insert features the NMS chipbreaker, which supports consistent chip formation and evacuation to improve surface quality and reduce the likelihood of chip entanglement in production turning. How does the negative 0° rake affect machining? A 0° negative rake increases the strength of the cutting edge and improves resistance to chipping during interrupted cuts or heavy engagement, contributing to process reliability and fewer unplanned stops. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany — Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
TNMG160408-NMS WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WSM20S grade for stable cutting in demanding materials; the triangular 60° geometry with a 0.8 mm corner radius delivers repeatable edge life and reliable chip control. Order directly via Metav Werkzeuge or consult our specialists for application support. TNMG160408-NMS WSM20S – Turning indexable insert, triangle 60°, Tiger·tec Silver (Walter Tools) TNMG160408-NMS WSM20S is a triangular indexable insert engineered for secure machining of stainless steels and heat‑resistant superalloys in demanding turning operations Tiger·tec Silver coated carbide grade WSM20S Optimised for stainless steels and superalloys Triangle 60° geometry with 0.8 mm corner radius Chipbreaker NMS for controlled chip formation Proven chip control for difficult-to-machine alloys The WSM20S grade, applied within the Tiger·tec Silver coating system, is tailored to maintain stable chip formation when machining materials that tend to gall or generate long, stringy chips. The integrated chipbreaker NMS supports uninterrupted removal of swarf, which reduces downtime and improves process reliability. For workshops facing high thermal loads, this insert provides a combination of thermal resistance and edge strength that translates directly into higher productivity and fewer interruptions. Geometry designed for consistent edge life and surface finish A triangle 60° form with a 0.8 mm corner radius offers repeatable corner strength and a versatile cutting edge suitable for both roughing and light finishing passes. The negative 0° rake promotes a secure cutting action that helps avoid chatter on unstable setups and contributes to consistent dimensional control. Users benefit from predictable wear behaviour and a better surface quality on components where tolerance and finish matter. Coating and grade features that extend tool life The coated carbide construction combines wear-resistant layers with a substrate optimised for toughness, improving resistance to flank and crater wear under intermittent or heavy cutting conditions. The Tiger·tec Silver technology enhances heat management at the cutting zone, which is particularly advantageous when processing stainless steels and titanium alloys that resist heat dissipation. This means longer indexable insert life and fewer insert changes per shift. Application scope and practical handling Suitable for machining operations classified under ISO groups M (rostfreie Stähle / stainless steels) and S (heat‑resistant superalloys and titanium), the insert performs well where cutting temperatures and edge stress are elevated. The TNMG form is compatible with standard triangular insert toolholders and is straightforward to seat and clamp, allowing seamless integration into existing turning tool sets. For optimal results, match cutting data to material group and monitor wear for timely index changes. Contact Metav Werkzeuge for tailored machining recommendations for Walter Tools Tiger·tec Silver inserts and receive application guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: TNMG160408-NMS-WSM20S-WALTER Product: Turning indexable insert (TNMG) Designation: TNMG160408-NMS WSM20S Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Geometry: Triangle 60° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: NMS Material suitability: S / M (heat‑resistant alloys, stainless steels) Series: Tiger‑tec Silver Execution: G Manufacturer brand: Walter Tools FAQ What materials is this insert suitable for? The TNMG160408-NMS WSM20S insert is suitable for ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), making it appropriate for demanding turning applications. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM20S grade improves thermal resistance and wear protection, which extends insert life and supports consistent cutting performance on challenging materials. What is the significance of the 0.8 mm corner radius? A 0.8 mm corner radius balances edge strength and surface finish capability, providing reliable edge life for roughing and finishing tasks with reduced risk of edge chipping. Which chipbreaker is fitted and what does it do? The insert features the NMS chipbreaker, designed to control chip formation and evacuation, thus enhancing process stability and reducing the chance of chip-related issues. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, new, factory‑fresh goods from the manufacturer.
TNMG160408-NMS WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver thermal stability, the WSM30S grade for demanding materials, and a controlled NMS chipbreaker for consistent machining performance; order through Metav Werkzeuge or consult our experts for process integration. TNMG160408-NMS WSM30S — Indexable turning insert, Tiger‑tec Silver (Walter Tools) The TNMG160408-NMS WSM30S is an indexable turning insert designed for heavy-duty finishing and semi-finishing of rostfreier Stahl and high-temperature alloys, featuring a triangular 60° shape and an optimised chipbreaker. Tiger‑tec Silver coating for thermal stability NMS chipbreaker for controlled chip formation For rostfreier Stahl and superalloys Triangular 60° form, 0.8 mm corner radius Higher throughput on demanding materials The Tiger‑tec Silver coating combined with the WSM30S grade provides enhanced heat resistance and edge security when machining tough alloys. This results in a more stable cutting process and reduced flank wear, which in turn supports longer tool life and fewer insert changes. The coated cemented carbide structure is engineered to reduce built-up edge and maintain surface quality under thermally demanding conditions when cutting rostfreier Stahl and heat-resistant superalloys. Predictable chip control and process reliability The dedicated NMS chipbreaker is designed to shape and control chips across a wide range of feeds and depths of cut. Controlled chip formation lowers the risk of entanglement, improves evacuation from the cutting zone and reduces machine downtime caused by chip-related interruptions. The 0° negative rake geometry contributes to a robust cutting edge that resists chipping under intermittent cuts, enhancing overall process reliability and repeatability. Geometry that balances productivity and surface finish The triangular 60° insert form provides three usable cutting corners, allowing multiple indexings per insert and therefore economical utilisation. A 0.8 mm corner radius supports consistent surface finish without excessive cutting forces, while the tolerance class M ensures dimensional accuracy for repeatable set-ups. These geometric characteristics combine to yield efficient material removal with a stable balance between productivity and part quality. Application scope and easy integration into workflows Specified for the ISO material groups S / M, this insert is especially suited to machining superalloys and rostfreier Stahl where heat generation and material toughness challenge the cutting edge. The designation and chipbreaker choice make the insert appropriate for finishing and semi-finishing operations on rotating parts, from smaller components to larger shafts, depending on toolholder selection. Compatibility with standard clamping systems and the insert’s robust design simplify process implementation in both single- and multi-shift production environments. For machining tasks that demand thermal stability and stable chip control, contact Metav Werkzeuge to discuss how the Walter Tools TNMG160408-NMS WSM30S can be integrated into existing tool plans or to request availability and technical advice Technical data SKU: TNMG160408-NMS-WSM30S-WALTER Product: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Execution: G Core dimensions Size: 16 mm Corner radius: 0.8 mm Thickness code: 04 Negative rake angle: 0° Tolerance class: M Features & applications Chipbreaker: NMS Insert shape: Triangular 60° Coating: Tiger‑tec Silver Grade: WSM30S Material suitability: S / M (superalloys, rostfreier Stahl) Intended use: finishing and semi-finishing FAQ What materials is this insert best suited for? The TNMG160408-NMS WSM30S is optimised for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), delivering secure chip formation and edge stability under thermal stress. Which chipbreaker is fitted and what does it do? The insert features the NMS chipbreaker; it controls chip geometry to improve evacuation and reduce the chance of chip-related interruptions during turning operations. How many usable cutting edges does the triangular shape provide? The triangular 60° form offers three cutting corners per insert, enabling multiple re-indexings and economical utilisation before replacement. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius provides a compromise between strength and finish: it supports robust cutting at moderate feeds while helping to achieve a consistent surface quality. Is the insert compatible with standard toolholders? The TNMG geometry is a common indexable insert format and fits matching holders for TNMG-style inserts; toolholder selection should correspond to the negative-rake execution and intended cutting parameters. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Walter Tools is referenced for clarification of product origin. There is no affiliation between our company and the named brands beyond factual description. The offered article is original, brand-new factory stock of the manufacturer.
TNMG160408-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold coating and the RM5 chipbreaker to achieve stable chip formation and consistent edge life when machining stainless steel; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our application team for process optimisation. TNMG160408-RM5 WMP20G indexable turning insert — Tiger‑tec Gold grade by Walter Tools The TNMG160408-RM5 WMP20G is a triangular indexable turning insert engineered for reliable machining of stainless steel under medium to robust cutting conditions, combining a coated carbide grade with a geometry tuned for secure chip control. Tiger‑tec Gold coating for longer tool life RM5 chipbreaker for stable chip control Triangle 60° form for versatile turning Suitable for stainless steel machining Maximum process reliability for demanding stainless applications The insert’s combination of a Tiger‑tec Gold coating and a coated carbide substrate delivers an improved resistance to built-up edge and thermal softening, which directly benefits cycle-time stability. The selected grade is tailored for stainless steel, materials that typically generate high cutting temperatures and tenacious chips; the result is a more predictable machining process with fewer interruptions. This engineering focus reduces unplanned rework and supports sustained production throughput. Consistent chip control and surface quality with RM5 geometry The integrated RM5 chipbreaker and the triangular 60° geometry enable regular chip formation and evacuation even under interrupted cuts. Stable chips reduce the risk of edge damage and machine downtime while promoting a consistent surface finish. For engineers and buyers seeking measurable gains, this means fewer tool changes and improved part conformity without complex parameter adjustments. Practical versatility and mounting convenience in standard toolholders The 60° triangular shape and standard TNMG interface provide compatibility with a wide range of toolholders and turning systems used in modern CNC shops. The insert’s negative 0° free angle supports secure engagement in heavier cuts, giving a robust option when facing tougher stainless turning tasks. This geometry simplifies inventory management by allowing one insert type to cover several common turning operations. Clear selection for machining stainless steel The grade designation and series signal suitability: the WMP20G grade belongs to a Tiger·tec Gold family designed for rostfreie Stähle and medium to robust cutting conditions. Choosing this insert aligns material properties—coated carbide and engineered chip control—with the specific demands of stainless steel, reducing the trial-and-error phase during process setup and helping to protect machine uptime and workpiece quality. For machining stainless steel with Tiger‑tec Gold performance, contact Metav Werkzeuge for application advice and availability of genuine Walter Tools inserts at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our consultants provide process-oriented recommendations and rapid supply. Technical data Article number: TNMG160408-RM5-WMP20G-WALTER SKU: TNMG160408-RM5-WMP20G-WALTER Type: Drehwendeschneidplatte / indexable turning insert Designation: TNMG160408-RM5 WMP20G Series: Tiger‑tec Gold Facts Plate form: Triangle 60° Plate size: 16 Thickness code: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features Grade: WMP20G (coated carbide) Chipbreaker: RM5 Execution: G Material group suitability: M (rostfreie Stähle) Application focus: medium to robust cutting conditions FAQ What materials is this insert intended for? The TNMG160408-RM5 WMP20G insert is specified for machining stainless steel and is designed to handle the thermal and mechanical demands of these materials. How does the RM5 chipbreaker affect performance? The RM5 chipbreaker promotes controlled chip formation and evacuation, which enhances surface finish stability and reduces the likelihood of built-up edge when machining stainless steel. Is this insert compatible with standard TNMG toolholders? Yes; the TNMG geometry and triangular 60° form fit conventional TNMG‑compatible toolholders used across turning applications. What benefit does the Tiger‑tec Gold series provide? The Tiger‑tec Gold series offers a coated carbide combination that improves wear resistance and thermal stability, helping to prolong edge life in challenging stainless turning operations. Can this grade be used for light finishing cuts? While optimised for medium to robust conditions, the insert can be used for finishing when parameters are adapted; the coating and chip control support a stable edge in varied cutting regimes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the listed brands. The offered article is an original, factory‑new product from the manufacturer Walter Tools.
TNMG160408-RM5 WMP20S Wendeplatten - Walter Tools
High wear resistance from the Tiger·tec Silver coating and the WMP20S grade delivers dependable edge life and secure chip formation in rostfreier Stahl; combined with the RM5 chipbreaker and a robust 0.8 mm corner radius, the insert supports productive turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific setup and availability. TNMG160408-RM5 WMP20S — Turning indexable insert, Tiger·tec Silver for rostfreier Stahl (Walter Tools) The TNMG160408-RM5 WMP20S is a triangular 60° indexable insert with RM5 chipbreaker, designed for medium to robust turning of rostfreier Stahl where stable cutting edges and controlled chip flow are required. Tiger·tec Silver coated carbide grade WMP20S Optimised RM5 chip control Triangle 60° geometry, 0.8 mm radius 0° negative rake for heavy cuts Consistent performance when machining rostfreier Stahl The combination of the WMP20S cutting grade and Tiger·tec Silver coating is formulated for the specific demands of rostfreier Stahl. These materials tend to work-harden and generate heat; the coated carbide composition promotes a stable cutting edge and supports safe chip formation under medium to robust conditions. As a result, the insert offers predictable wear behaviour, which simplifies process planning and reduces unexpected downtime. Reliable chip control and enhanced edge stability The RM5 chipbreaker is tuned to produce manageable chips during turning, reducing the risk of re-cutting and surface damage. The insert’s negative 0° free angle increases edge strength for tougher cuts, while the corner radius 0.8 mm provides a balance between durability and surface finish. Together, these features improve consistency across serial production and make the insert suitable for more demanding stainless applications. Geometry and dimensions that support productive turning The triangular 60° form provides three indexing positions per insert, improving tool life economy in serial turning operations. The nominal size 16 and thickness 04 correspond to established TNMG conventions, offering compatibility with a wide range of toolholders. The compact edge geometry allows for dependable chip evacuation and flexible use across roughing and semi-finishing steps without complex tool changes. Process benefits and practical application notes Using a coated carbide insert from the Tiger·tec Silver family reduces the need for frequent indexing and supports longer tool cycles, which can lower per-part costs in continuous production. For rostfreier Stahl, the combination of grade and chipbreaker helps prevent built-up edge and improves batch-to-batch repeatability. If machining parameters require optimisation, process data can be adapted to the workpiece grade and machining centre to maximise the benefit of the insert. Contact Metav Werkzeuge for application advice, stock information and to discuss the Walter Tools TNMG160408-RM5 WMP20S insert — e‑mail info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: TNMG160408-RM5-WMP20S-WALTER Designation: TNMG160408-RM5 WMP20S Product type: Drehwendeschneidplatte (turning indexable insert) Series: Tiger·tec Silver Manufacturer: Walter Tools Grade: WMP20S Core dimensions Size: 16 Thickness: 04 Corner radius: 0.8 mm Shape: Triangle 60° Free angle: 0° (negative) Features and applications Coating: Tiger·tec Silver Chipbreaker: RM5 Material grade: coated carbide Suitable for: rostfreier Stahl Typical use: medium to robust turning conditions FAQ Is this insert suitable for stainless steel turning? Yes. The TNMG160408-RM5 WMP20S insert is designed with the WMP20S grade and Tiger·tec Silver coating specifically for rostfreier Stahl and performs well under medium to robust conditions. What advantage does the RM5 chipbreaker provide? The RM5 chipbreaker improves chip control during turning, promoting predictable chip shapes and reducing the likelihood of re-cutting or surface damage when machining rostfreier Stahl. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for heavier cuts while still allowing a good surface finish in many turning operations, enhancing overall process stability. Can this insert be used for roughing and finishing? Yes. The combination of a robust grade, coated carbide and the triangular geometry allows flexible use across roughing and semi-finishing tasks in rostfreier Stahl, depending on cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160408-RM5 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WMP30G grade for reliable machining of stainless steel, together with the RM5 chipbreaker and a 0.8 mm corner radius for consistent surface finish and process stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160408-RM5 — TNMG160408-RM5 WMP30G — WMP30G indexable insert for stainless steel (Walter Tools) The TNMG160408-RM5 WMP30G is a triangular 60° indexable insert engineered for robust turning of stainless steel in moderate to demanding machining conditions. Tiger‑tec Gold coating for longer tool life WMP30G grade for stainless steel machining RM5 chipbreaker for controlled chip formation Triangular 60° insert with 0.8 mm corner radius Reliable cutting performance for stainless-steel turning The combination of the Tiger‑tec Gold coating and the WMP30G carbide grade provides a balance between wear resistance and reliable chip evacuation when machining stainless steel. The coated carbide substrate reduces adhesive wear and supports a stable cutting edge, which helps to limit built-up edge and maintain dimensional accuracy over longer tool life. For operators and process planners this means fewer insert changes and more predictable cycle times, aiding consistent component quality. Geometry and chip control that improves surface quality A triangular 60° shape with a 0.8 mm corner radius gives a good compromise between strength and edge definition for finishing and light to medium turning operations. The RM5 chipbreaker promotes controlled chip segmentation, reducing the risk of long, stringy chips that impair surface finish and tool life. The insert’s negative 0° relief supports secure mounting and robust cutting in interrupted cuts; chip control features reduce heat concentration and help to produce repeatable surface finishes with less manual intervention. Process reliability and workshop integration Designed as a standard indexable turning insert, the component fits conventional clamping systems and is easy to replace, supporting high machine uptime. The coated carbide construction combined with the grade’s focus on stainless steel behaviour addresses common machining challenges such as work-hardening and poor thermal conductivity. Specifying this insert supports efficient material removal with consistent results, which in turn contributes to lower overall machining costs and predictable throughput for production batches. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger‑tec Gold inserts or to request a specification sheet; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data Article number: TNMG160408-RM5-WMP30G-WALTER Designation: TNMG160408-RM5 WMP30G Manufacturer: Walter Tools Product type: Indexable turning insert (triangular) Numbers / Core Technical Data Corner radius: 0.8 mm Inscribed circle / size designation: 16 Plate thickness code: 04 Relief / clearance angle: 0° (negative) Platen form: Dreieck 60° Tolerance class: M Designs / Special features Series: Tiger‑tec Gold Grade: WMP30G (coated carbide) Chipbreaker: RM5 Material application: stainless steel (M group) Execution: G FAQ What materials is this insert optimised for? The insert is optimised for stainless steel applications; the WMP30G grade and Tiger‑tec Gold coating support secure chip formation and wear resistance when machining M-group materials. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes segmented, controllable chips, lowering the risk of long chips and improving surface finish and process stability during turning operations. What does the 0.8 mm corner radius mean for part quality? A 0.8 mm corner radius provides enhanced edge strength for improved tool life while still allowing for tight profile control and good surface finish in finishing and semi-finishing cuts. Is this insert suitable for interrupted cuts or heavy roughing? The negative 0° relief and robust geometry make the insert suitable for demanding conditions, including interrupted cuts; performance depends on cutting data and holder rigidity. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Walter Tools (Walter AG) is part of the Sandvik Group and is recognised for precision tooling and reliable performance in metalworking.
TNMG160408-RM5 WSM10S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, secure chip control and proven Tiger·tec Silver performance for consistent, productive turning of stainless steel and heat‑resistant alloys; order or request application advice via Metav Werkzeuge. TNMG160408-RM5 WSM10S — Indexable turning insert for stainless steel and superalloys (Walter Tools, Tiger·tec Silver, 0°) TNMG160408‑RM5 WSM10S is an indexable turning insert engineered for demanding applications in stainless steel and heat‑resistant alloys, offering a robust negative rake geometry and optimized chip control. Tiger·tec Silver grade WSM10S RM5 chipformer for controlled chips 0° negative rake for stable cutting 0.8 mm corner radius for robust edges Maximised cutting performance through specialised grade selection The WSM10S grade, part of the Tiger·tec Silver family, is formulated as a coated carbide to resist the thermal and mechanical demands of turning stainless steel and challenging high‑temperature alloys. This chemistry and coating combination supports stable cutting edges under elevated cutting temperatures, which reduces edge breakdown and helps maintain tool life during extended production runs. For shops aiming to keep cycle times short and regrind intervals long, the engineered balance between wear resistance and toughness in this grade translates directly into fewer tool changes and steadier process windows. Predictable chip formation and consistent surface quality The RM5 chipbreaker combined with a 0.8 mm corner radius produces short, segmented chips and predictable chip flow in interrupted and continuous cuts alike. Predictable chips lower the risk of chip entanglement and improve operator safety, while also protecting machined surfaces from gouging. As a result, the overall surface finish benefits from reduced vibration and fewer secondary operations, which supports just‑in‑time workflows and lowers downstream finishing effort. Geometry engineered for heavy‑duty turning stability A triangular 60° insert form with a 0° negative rake angle provides high mechanical strength at the cutting edge and reliable seat stability in standard indexable toolholders. The thicker plate body and negative geometry are particularly advantageous when taking heavier depths of cut or when facing interrupted surfaces common in components made from stainless steel or nickel‑based alloys. The insert’s tolerance class M ensures consistent mating with clamping systems, reducing variation between tool changes and simplifying process standardisation across machines. Productivity gains and application guidance for workshop integration Integrating this insert into production offers measurable gains: reduced tool change frequency, improved process stability and better repeatability on high‑value components. Where surface integrity and edge quality matter—medical components, aerospace parts or high‑performance industrial valves—the combination of grade and chip control helps maintain component tolerances and minimise scrap. For shops seeking quick implementation, the insert’s specifications align with common holder geometries and clamping practices, enabling a smooth transition with minimal fixturing adjustments. For application advice tailored to Walter Tools TNMG160408-RM5 WSM10S and recommendations on toolholder selection, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMG160408-RM5-WSM10S-WALTER Label: Drehwendeschneidplatte TNMG160408-RM5 WSM10S Walter Tools Manufacturer: Walter Tools WPL designation: TNMG160408-RM5 WSM10S Series: Tiger-tec Silver Grade: WSM10S Facts Insert size: 16 mm Thickness: 04 (4 mm) Corner radius: 0.8 mm Rake angle: 0° (negative) Shape angle: 60° Tolerance class: M Special features Chipbreaker: RM5 Coated carbide (Tiger·tec Silver technology) Geometry: G Suitable for: stainless steel (M), S materials (superalloys & titanium) Application focus: heavy‑duty and difficult‑to‑cut materials FAQ What materials is this insert best suited for? The TNMG160408‑RM5 WSM10S by Walter Tools is optimised for stainless steel and for heat‑resistant superalloys; the Tiger·tec Silver coating enhances thermal resistance and edge life in these materials. Which chipbreaker should be expected and why is it beneficial? The insert features the RM5 chipbreaker, designed to produce short, controllable chips and to reduce the likelihood of chip build‑up and surface damage during turning operations. Is the geometry compatible with standard toolholders? The triangular 60° form and tolerance class M ensure compatibility with commonly used holders for indexable inserts, allowing straightforward integration into existing tool systems. How does the 0° negative rake affect cutting? A 0° negative rake increases mechanical strength at the cutting edge, improving stability for heavier cuts and interrupted turning—advantages that directly support process reliability on demanding jobs. Can the grade handle interrupted cuts and high temperatures? Yes, the WSM10S grade and Tiger·tec Silver coating are engineered for elevated cutting temperatures and the mechanical stresses of interrupted cuts typical in stainless steel and S‑group materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product from the stated manufacturer (Walter Tools).
TNMG160408-RM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for demanding materials; the insert’s RM5 chipbreaker and 0.8 mm corner radius deliver stable chip control and consistent tool life. Order the insert via Metav Werkzeuge or contact our consultants for process recommendations. TNMG160408-RM5 WSM20S — Turning insert (Triangle 60°) by Walter Tools, for stainless steels and superalloys The TNMG160408-RM5 WSM20S is a triangular indexable insert designed for turning operations in rostfreie Stähle and heat-resistant superalloys, combining a robust coating and a chipforming geometry that supports secure cutting under high thermal load. Tiger·tec Silver coating for high wear resistance Optimised for stainless steel and superalloys Triangle 60° insert with 0.8 mm corner radius Negative 0° rake for stable cutting Higher metal removal rates for difficult-to-machine alloys The combination of the WSM20S grade and the Tiger·tec Silver coating is engineered to improve thermal stability and edge strength when machining stainless steels and nickel- or cobalt-based alloys. The advanced coated carbide substrate resists abrasion and reduces microchipping at the cutting edge, which in turn enables higher cutting speeds and extended tool life. For workshops seeking predictable cycle times, this translates into improved throughput and fewer tool changes, delivering tangible gains in process efficiency and machine utilisation. Reliable chip control and consistent surface finish The integrated RM5 chipbreaker and the triangular 60° geometry support controlled chip formation and evacuation, even under the low-thermal-conductivity conditions typical of superalloys. The 0.8 mm corner radius offers a balance between edge strength and finish capability, helping to avoid built-up edge and maintain a consistent surface quality. The 0° (negative) rake angle increases cutting-edge robustness for interrupted cuts and long overhangs, reducing the risk of edge degradation during demanding turning cycles. Robust specification for secure integration into production Tolerance class M and the proven design cues of the Tiger·tec Silver series ensure the insert fits established toolholders and clamping systems with minimal adjustment. The marked geometry and thickness code assist in fast tool setup and repeatable results across batches. When mounted in a suitable turning holder, the insert supports steady, repeatable performance that contributes to process stability and predictable maintenance intervals — an important factor for production planning and cost control. The Walter Tools pedigree underpins this consistent behaviour with a focus on cutting-edge durability. Contact Metav Werkzeuge to discuss machining parameters for the Walter Tools TNMG160408-RM5 WSM20S insert or to request availability and expert advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TNMG160408-RM5-WSM20S-WALTER Label: Drehwendeschneidplatte TNMG160408-RM5 WSM20S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Facts / Core dimensions Insert shape: Triangle 60° Inscribed circle / size: 16 mm Corner radius: 0.8 mm Thickness code: 04 Rake angle: 0° (negative) Tolerance class: M Special features / Material & application Grade: WSM20S Series: Tiger·tec Silver Coating: Tiger·tec Silver coated carbide Chipbreaker: RM5 Applicable materials: S / M (superalloys and rostfreie Stähle) Execution: G FAQ What materials is this insert suited for? The TNMG160408-RM5 WSM20S insert is designed for rostfreie Stähle and heat‑resistant superalloys (ISO groups M and S), offering wear resistance and thermal stability for these demanding materials. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker provides controlled chip formation and evacuation; with the Tiger·tec Silver coating and 0.8 mm corner radius, the insert supports improved surface finish and reduced edge wear during continuous turning. Which geometry fits standard toolholders? The triangular 60° form and the TNMG designation make the insert compatible with common indexable turning holders designed for TNMG‑type inserts, enabling quick replacement and repeatable positioning. Is the negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases edge robustness and is well suited to interrupted cuts or applications with extended tool overhang where edge stability is critical. How does the WSM20S grade differ from general-purpose grades? WSM20S is a Walter Tools coated carbide grade within the Tiger·tec Silver family, optimised for high temperature resistance and stable cutting in rostfreie Stähle and superalloys, offering longer tool life under thermal load. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160408-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of a proven Tiger·tec Silver grade, robust RM5 chip control and a triangular 60° geometry for stable, productive turning of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. TNMG160408-RM5 WSM30S – Indexable turning insert, Tiger·tec Silver grade, Walter Tools A TNMG160408-RM5 WSM30S indexable turning insert engineered for secure and productive machining of stainless steels and difficult‑to‑machine, heat‑resistant alloys. Tiger·tec Silver coating for high edge stability Designed for stainless steel and superalloys Triangular 60° insert with 0.8 mm corner radius Negative 0° rake for secure, heavy‑duty cuts Consistent edge life for demanding materials The combination of the WSM30S grade and Tiger·tec Silver coating provides a high level of thermal and mechanical resistance suited to machining stainless steels (M) and superalloys or titanium alloys (S). The coated carbide microstructure reduces flank wear and supports stable chip formation, which translates into longer tool life and fewer insert changes in continuous production runs. For shop floors facing high cutting temperatures and sticky materials, this insert offers measurable improvements in process reliability and repeatability. Geometry that enables heavy, controllable cutting A triangular 60° shape with a 0.8 mm corner radius and a negative 0° rake delivers rigidity and resistance to edge chipping during roughing and interrupted cuts. The RM5 chipbreaker is designed to control chip shape under high thermomechanical load, reducing the risk of entanglement and improving surface stability. These geometric characteristics mean fewer stoppages for rework, a reduction in toolholder vibration and more consistent part quality in semi‑finish and rough‑turning operations. Practical integration for higher productivity The insert is compatible with standard TNMG toolholders and is intended for workshops seeking a balance of performance and predictable maintenance intervals. By employing the WSM30S grade, users gain an insert that supports higher cutting parameters while maintaining surface integrity, especially when machining rostfreier Stahl (stainless steel) and comparable alloys. For selection of the optimal seat, clamping and cutting data, Metav Werkzeuge provides tailored advice to align insert choice with machine power, coolant strategy and cycle times. Contact Metav Werkzeuge today for a personalised recommendation on Walter Tools Tiger·tec Silver inserts and to receive detailed cutting data and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMG160408-RM5-WSM30S-WALTER Designation: TNMG160408-RM5 WSM30S Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Insert size: 16 mm Corner radius: 0.8 mm Thickness code: 04 Shape: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: RM5 Coating: Tiger·tec Silver (coated carbide) Material suitability: S / M (superalloys/titanium and stainless steel) Application focus: Heavy‑duty turning, roughing and semi‑finishing FAQ Which materials can this insert machine effectively? The TNMG160408-RM5 WSM30S insert (Walter Tools, Tiger·tec Silver) is specified for stainless steel (M) and heat‑resistant superalloys or titanium (S), offering good performance where thermal resistance and secure chip control are required. What are the key geometric features of the insert? This indexable turning insert features a triangular 60° shape, a 0.8 mm corner radius, a negative 0° rake and the RM5 chipbreaker for improved chip control during heavy cutting. For which turning operations is the insert most suitable? The insert is optimised for roughing and semi‑finishing of difficult‑to‑machine materials, providing rigidity and edge stability for higher metal removal rates and fewer interruptions. Does the WSM30S grade tolerate elevated cutting temperatures? Yes, the WSM30S grade within the Tiger·tec Silver series is engineered to resist high temperatures and maintain a stable cutting edge, supporting reliable performance under demanding thermal loads. Is this insert compatible with standard TNMG toolholders? The TNMG160408-RM5 WSM30S is designed for standard TNMG pockets; confirmation of clamping and seat compatibility with a specific holder is recommended before use. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160408-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Gold coating and the WPP05G grade for reliable steel turning with consistent chip control and extended edge life; order via Metav Werkzeuge or consult our specialists for application support. TNMG160408-RP5 WPP05G – indexable turning insert for steel, Walter Tools, Tiger·tec Gold, 0.8 mm corner radius The TNMG160408-RP5 WPP05G is a triangular indexable insert designed for efficient turning of steel, combining an optimised chipbreaker with a robust coated-carbide grade for industrial metalcutting. Tiger·tec Gold coating for long tool life Optimised RP5 chipbreaker for steel turning Triangular 60° geometry with 0.8 mm edge Higher throughput through coating and chip control The combination of the Tiger·tec Gold coating and the WPP05G grade delivers measurable productivity gains in steel applications. The coated-carbide construction is engineered to withstand the thermal and mechanical loads typical of ISO P materials, which means fewer tool changes and more uninterrupted machining time. The integrated RP5 chipbreaker is tailored for predictable chip formation when turning steel, helping to reduce cycle times and improve process efficiency without additional operator intervention. Predictable wear and improved surface quality A controlled cutting geometry reduces unexpected wear and supports repeatable results. The 0.8 mm corner radius and 0° (negative) relief angle create a stable cutting edge that balances strength and cutting performance, producing consistent finishes over extended tool life. This combination helps maintain dimensional accuracy and surface integrity on turned components, making it suitable for series production where reproducibility is critical. Robust geometry that lowers downtime The triangular 60° insert shape offers three usable cutting edges per indexable plate, improving economy and reducing tool change frequency. The plate thickness and overall geometry, together with the RP5 chip control, simplify swarf evacuation and minimise the risk of chip-related interruptions. As a result, set-up time is optimised and machine uptime is increased, supporting reliable production flow in busy workshops. Application guidance and compatibility This insert is specified for turning operations in steel in accordance with the ISO P grouping; the WPP05G grade gives a balance between wear resistance and toughness for a wide range of steels. For applications beyond general steel turning, or for recommendations on feeds, speeds and holder selection, consult Metav Werkzeuge’s technical team to match the insert to machine and part requirements. The product is part of a series engineered for industrial machining where process security and repeatable performance are priorities. Choose Walter Tools Tiger·tec Gold inserts for reliable steel turning — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and ordering Technical Data Article number: TNMG160408-RP5-WPP05G-WALTER SKU / designation: TNMG160408-RP5 WPP05G Product type: indexable turning insert Facts Inscribed circle / size: 16 Corner radius: 0.8 mm Plate thickness: 04 Relief angle: 0° (negative) Geometry: triangular 60° Chipbreaker: RP5 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP05G (coated carbide) Target material group: steel (ISO P) Optimised chip control for steel turning Robust edge for consistent wear performance FAQ What materials is this insert designed for? The TNMG160408-RP5 WPP05G insert by Walter Tools is specified for steel (ISO P); the WPP05G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation behaviour of steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker improves chip control during steel turning, promoting short, manageable chips and reducing the likelihood of swarf-related interruptions when using the TNMG160408-RP5 WPP05G insert. How many cutting edges are available per insert? The triangular 60° form provides three cutting edges per insert, extending usable life before indexing and improving cost-efficiency in serial production. What does the 0.8 mm corner radius mean for finishing? A 0.8 mm corner radius offers a good compromise between edge strength and surface finish, supporting stable operation and repeatable surface quality on turned parts. Is this insert suitable for stainless steel or other materials? The TNMG160408-RP5 WPP05G is targeted at ISO P (steel); suitability for stainless steel or specialised alloys is not specified here and should be verified with Metav Werkzeuge for the intended application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers (Walter Tools).
TNMG160408-RP5 WPP10G Wendeplatten - Walter Tools
Take advantage of a wear-resistant grade and reliable chip control: the Tiger·tec Gold coating combined with the WPP10G grade and RP5 chipbreaker delivers productive, stable turning in steel applications. Order the insert directly via Metav Werkzeuge or ask our consultants for machining recommendations. TNMG160408-RP5 WPP10G turning insert — coated carbide for steel, Walter Tools TNMG160408-RP5 WPP10G is a triangular indexable turning insert engineered for robust and productive steel machining, offering a wear-resistant graded coating and a chipformer optimised for stable cutting. Tiger·tec Gold coating for long tool life WPP10G grade for wear resistance RP5 chipbreaker for consistent chip control Triangular 60° form with 0.8 mm corner radius Consistent cutting performance for steel production The Tiger·tec Gold technology provides a coated carbide surface that resists abrasive wear and thermal degradation, which translates into longer tool life and fewer insert changes. The WPP10G grade is formulated specifically for steel (ISO P) applications, balancing toughness and wear resistance to cope with the heat and chip formation typical of continuous and interrupted cuts. This combination reduces downtime and improves process stability, especially in medium- to high-volume turning operations. Reliable chip control and improved surface quality The RP5 chipbreaker is designed to generate short, controllable chips when machining steel, lowering the risk of chip entanglement and tool damage. The insert’s triangular 60° geometry and 0.8 mm corner radius deliver a robust cutting edge that supports both finishing and semi-finishing passes, helping to achieve consistent surface finish. The insert’s negative rake (0°) increases edge strength for tougher cuts and interrupted surfaces, giving predictable performance in varied turning conditions. Simple integration and repeatable productivity Tolerance class M and the standard TNMG designation ensure compatibility with widely used toolholders and setups, enabling quick index changes and predictable clamping. The insert thickness and dimensional specifications follow industry norms, so toolroom adaptation is straightforward. By using a grade optimised for steel and the modern Tiger·tec Gold coating, users gain a favourable balance between tool life and machining economy, supporting repeatable results and lower overall operating costs. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools Tiger·tec Gold TNMG160408-RP5 WPP10G inserts for reliable steel turning Technical Data SKU: TNMG160408-RP5-WPP10G-WALTER Article label: Drehwendeschneidplatte TNMG160408-RP5 WPP10G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Facts Insert size: 16 Corner radius: 0.8 mm Plate thickness: 04 Insert shape: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RP5 Material suitability: Steel (ISO P) Designation: TNMG160408-RP5 Type: Indexable turning insert FAQ What materials is this insert intended for? The TNMG160408-RP5 WPP10G insert by Walter Tools is designed primarily for steel machining and is specified for ISO P material groups. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP10G grade enhances wear resistance and thermal stability, extending the insert life and improving productivity in serial turning operations. Is the chip control suitable for interrupted cuts? Yes; the RP5 chipbreaker and the insert’s robust 60° triangular geometry provide stable chip formation and an edge capable of handling interrupted and mixed cutting conditions. Will this insert fit standard TNMG toolholders? The TNMG160408-RP5 designation conforms to common industry dimensions and tolerance class M, ensuring compatibility with standard TNMG toolholders. What 0.8 mm corner radius means for surface finish? A 0.8 mm corner radius balances edge strength and finish capability, allowing reliable semi-finish and finishing passes with improved surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com