TNMG160408-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of high cutting reliability and consistent chip control through the combination of the Tiger·tec Gold coating and the RP5 chipbreaker, delivering stable productivity in steel turning. Benefit from the triangular 60° geometry and a 0.8 mm nose radius for flexible feed and finishing options. Order or request application advice via Metav Werkzeuge for an optimised machining setup. TNMG160408-RP5 WPP20G indexable turning insert, Tiger·tec Gold, for steel — Walter Tools The TNMG160408-RP5 WPP20G is a triangular 60° indexable insert designed for demanding steel turning, offering a coated carbide grade that balances wear resistance and toughness. Tiger·tec Gold coated carbide grade WPP20G RP5 chipbreaker for reliable chip control Triangular 60° shape with 0.8 mm nose radius Optimised for steel machining (ISO P) High productivity through a balanced carbide grade and coating The combination of Tiger·tec Gold coating and the WPP20G grade provides a balanced performance profile: enhanced wear resistance combined with sufficient toughness for varied cutting conditions. This coated carbide system reduces flank wear and extends tool life under typical steel turning heat and stress, which translates into longer uninterrupted production runs and fewer insert changes. The result is predictable tool behaviour that supports process planning and reduces unexpected downtime. Reliable chip control for safer, cleaner operations The RP5 chipbreaker is engineered to produce short, consistent chips when machining steels, improving evacuation and reducing the risk of entanglement. Effective chip control reduces secondary operations and cleaning time, while improving surface consistency on the workpiece. For less experienced operators, the defined chip formation simplifies process setup and reduces the need for repeated parameter adjustments. Geometry that supports precision and versatility The triangular 60° plate form with a 0.8 mm nose radius offers a practical compromise between strength and finish capability. The insert’s 0° (negative) clearance provides a stable cutting edge under heavier cuts and interrupted cuts, enhancing edge security and repeatability. These geometric choices allow for both roughing passes at higher material removal rates and fine finishing passes that achieve consistent surface quality. Application-oriented performance and process security Specifically developed for ISO group P (steel) applications, this insert suits a broad range of unalloyed and alloyed steels. The design emphasis is on maintaining a steady cutting edge and predictable tool life, supporting efficient batch production and one-off jobs alike. The engineered balance of wear resistance and toughness means fewer unexpected insert failures and a more economical overall machining process. The insert’s compatibility with common toolholders makes integration into existing turning stations straightforward. For machining advice or to specify the TNMG160408-RP5 WPP20G for a particular steel application, contact Metav Werkzeuge for tailored recommendations and fast order processing Technical data Article number: TNMG160408-RP5-WPP20G-WALTER Description: Drehwendeschneidplatte TNMG160408-RP5 WPP20G Walter Tools Product type: indexable turning insert Series: Tiger·tec Gold Facts Plate size: 16 mm Nose radius: 0.8 mm Plate thickness: 04 Geometry: triangular 60° Clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: RP5 Material application: steel (ISO P) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TNMG160408-RP5 WPP20G insert is optimised for ISO group P materials, specifically unalloyed and alloyed steels, using the Walter Tools coated carbide grade for balanced wear resistance and toughness. How does the RP5 chipbreaker affect process stability? The RP5 chipbreaker delivers consistent short chips during steel turning, improving evacuation and reducing the likelihood of entangling or damaging the workpiece, thereby enhancing overall process stability with the Walter Tools geometry. What are the advantages of the 60° triangular form and 0.8 mm nose radius? The triangular 60° form provides three usable cutting edges per insert for economical indexing, while the 0.8 mm nose radius balances cutting-edge strength with good surface finish capability during finishing passes. Is the insert compatible with standard toolholders? The TNMG160408-RP5 WPP20G follows standard insert dimensions and can be used in common indexable insert toolholders designed for TNMG-type plates, facilitating integration into existing turning setups. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer. Walter Tools is referenced where applicable.
TNMG160408-RP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the RP5 chipbreaker and a robust triangle 60° geometry to secure consistent results in steel turning; order the insert directly via Metav Werkzeuge or consult our experts for application support. TNMG160408-RP5 WPP30G Turning Insert, Triangle 60°, RP5 – Walter Tools A TNMG160408-RP5 WPP30G turning insert engineered for reliable, productive machining of steel using Walter Tools' Tiger‑tec Gold coated carbide technology. Tiger‑tec Gold coated carbide grade WPP30G RP5 chipbreaker for controlled chip formation Triangle 60° form with 0.8 mm corner radius Negative 0° rake for stable heavy cuts Consistent cutting performance for steel production The combination of a Tiger‑tec Gold coating and a coated carbide substrate provides a balance between wear resistance and toughness, which supports repeatable cycle times in steel machining. The insert’s triangle 60° form and negative 0° clearance create a stable cutting edge for interrupted and continuous cuts, reducing vibration and helping to maintain dimensional accuracy. For production managers, this means fewer tool changes and more predictable tool life under typical ISO P conditions. The specification toleranzklasse M indicates standard dimensional accuracy suitable for general turning operations. Predictable chip control and surface results The RP5 chipbreaker is designed to produce short, controlled chips when cutting steels, helping to avoid entanglement and improving process safety. The 0.8 mm corner radius gives a compromise between strength and surface finish: it reduces edge chipping during tougher cuts while still enabling acceptable component surfaces without excessive cutting forces. For engineers unfamiliar with chipbreaker technology, RP5 refers to a geometry that actively directs and breaks the chip close to the cutting edge, which is particularly useful during medium to heavy cutting regimes. Application guidance for integration into workflows This insert grade WPP30G is formulated for the machining of steel (ISO group P) and is optimised for the thermal and chip-formation behaviour typical of these materials. Use the insert in a tool holder compatible with TNMG 1604 style inserts; the insert designation encodes insert type, size and chipbreaker so tool setup and reordering remain straightforward. When assessing suitability for specific operations, consider the combination of insert grade, chipbreaker and machine rigidity: the coated carbide with Tiger‑tec Gold supports steady productivity, while the negative clearance and triangular geometry enhance process stability in heavier passes. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts and guidance for optimised steel turning in your production environment Technical Data Article number: TNMG160408-RP5-WPP30G-WALTER Designation: TNMG160408-RP5 WPP30G Manufacturer: Walter Tools Product type: turning insert Series: Tiger‑tec Gold Core Data Insert size: 16 Plate thickness: 04 Corner radius: 0.8 mm Clearance angle: 0° (negative) Insert form: Triangle 60° Tolerance class: M Special features Coating/Grade: Tiger‑tec Gold (WPP30G) Chipbreaker: RP5 Material application: Steel (ISO group P) Execution: G FAQ What materials is this insert suitable for? The TNMG160408-RP5 WPP30G is specified for steel (ISO group P); the Walter Tools grade WPP30G is developed to handle the heat and chip-formation characteristics typical of these materials. What does the RP5 chipbreaker achieve? RP5 is a chipbreaker geometry that produces short, controllable chips and directs chip flow away from the cutting zone, improving safety and consistency when using the Walter Tools insert in turning operations. How does the 0.8 mm corner radius affect performance? A corner radius of 0.8 mm increases edge strength and reduces the risk of chipping during heavier cuts while maintaining reasonable surface finish, offering a useful compromise for mixed turning tasks. Is the negative 0° clearance suited to interrupted cuts? The negative 0° clearance contributes to a robust cutting edge and improved stability, which is advantageous for interrupted or heavy cutting scenarios typical in steel turning with this insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods of the manufacturer.
TNMG160412-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WSM20S grade for stable chip control and longer edge life when machining stainless steels and heat-resistant alloys; choose Metav Werkzeuge for expert advice or for procurement assistance. TNMG160412-FM5 WSM20S turning insert — Triangle 60°, 1.2 mm corner radius, Walter Tools The TNMG160412-FM5 WSM20S is a coated carbide turning insert designed for demanding machining of stainless steels and heat‑resistant superalloys, combining a robust negative rake and a chipbreaker tailored for secure chip formation Tiger·tec Silver coated carbide grade WSM20S Optimised for stainless steels and superalloys Triangle 60° shape, 1.2 mm corner radius Negative 0° rake for a strong cutting edge Consistent cutting performance for difficult-to-machine materials The WSM20S grade in the Tiger·tec Silver family is formulated to deliver stable chip formation and reliable edge life when machining materials that tend to work‑harden or generate heat, such as stainless steels and nickel‑based alloys. A coated carbide substrate provides thermal resistance and wear protection; this means fewer unplanned tool changes and more predictable cycle times. In practical terms, the chemical and mechanical design of the grade helps maintain a stable cutting edge under thermal stress, resulting in improved process stability and a more consistent surface finish for turned components. Geometry engineered for process security and dimensional accuracy The triangular 60° platform with a 1.2 mm corner radius offers a balance between edge strength and finish quality: the larger radius increases edge robustness for intermittent cuts, while the triangle form provides three indexed cutting edges per insert for economic tool utilisation. The negative 0° rake enhances the effective strength of the cutting edge, which is beneficial when facing heavy radial loads or interrupted cuts; operators should note that a stronger edge typically requires slightly higher cutting forces, but pays off through reduced edge chipping and longer in‑service life. This geometry supports reproducible part tolerances and reduces the need for corrective rework. Chip control and surface quality adapted to production needs The FM5 chipbreaker is designed to manage chips typically produced when machining M (stainless steels) and S (heat‑resistant superalloys) groups; it promotes short, controllable chips and reduces the risk of built‑up edge formation. For production environments, that translates into safer handling around the machine, reduced secondary cleaning operations and more consistent surface integrity. The combination of chip control and the coated grade reduces downtime caused by poor chip evacuation and improves overall process throughput, making this insert suitable for batch production as well as serial manufacturing. Practical handling and integration into existing tool systems The TNMG format follows common ISO toolholder interfaces, so the insert fits standard turning toolholders configured for triangular inserts. The designation indicates the insert geometry and chipbreaker type—useful when matching to turning parameters. Replacement is straightforward: each indexed edge is accessible by rotating the insert, offering quick turnaround during tool changes. The insert’s execution code and tolerance class ensure consistent fit and repeatable clamping, supporting predictable offsets and quick setup changes in busy shops. For application recommendations or to discuss Walter Tools turning inserts with Tiger·tec Silver for specific stainless or superalloy tasks, please contact Metav Werkzeuge for tailored technical guidance and procurement support Technical Data SKU: TNMG160412-FM5-WSM20S-WALTER ISO designation: TNMG160412-FM5 WSM20S Grade: WSM20S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Size (inscribed circle): 16 mm Corner radius: 1.2 mm Thickness: 04 Free angle (rake): 0° (negative) Tolerance class: M Special features Chipbreaker FM5 Coated carbide grade Suitable for stainless steels and superalloys (S / M) Triangle 60° shape Execution: G FAQ What materials is this insert suitable for? The TNMG160412‑FM5 WSM20S insert is intended for stainless steels and heat‑resistant superalloys (material groups M and S), using the Tiger·tec Silver coated carbide grade for improved chip control. How does the FM5 chipbreaker affect machining? The FM5 chipbreaker on this Walter Tools insert produces short, controlled chips when machining tough alloys, which helps maintain surface integrity and reduces the risk of built‑up edge. Can the insert be indexed to use multiple cutting edges? Yes, the triangular 60° geometry provides three usable cutting edges, allowing for economical indexing and reduced tooling costs per edge for the TNMG160412‑FM5 WSM20S insert. What is the benefit of the negative 0° rake? A negative 0° rake increases cutting edge strength and resistance to chipping under heavy or interrupted cuts; this characteristic supports stable, repeatable turning operations in demanding materials. Is the grade suitable for serial production environments? The combination of WSM20S grade and Tiger·tec Silver coating offers consistent edge life and chip control, which supports reliable serial production and reduces unexpected tool changes. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
TNMG160412-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the robust WPP10G grade for consistent steel turning results; the combination of optimised chip control and a 1.2 mm corner radius supports long tool life and stable machining. Order directly via Metav Werkzeuge or request advice from our consultants for application-specific recommendations. TNMG160412-FP5 WPP10G turning indexable insert — Walter Tools, for steel (ISO P), Tiger·tec Gold coating, FP5 chipbreaker The TNMG160412-FP5 WPP10G is a triangular 60° turning insert designed for productive steel machining, combining a coated-carbide grade from the Tiger·tec Gold series with the FP5 chipbreaker to ensure controlled chips and reliable cutting behaviour. Tiger·tec Gold coated carbide Optimised chip control FP5 geometry 60° triangular shape for secure indexing 1.2 mm corner radius for robust cutting Increased productivity for steel turning with durable coating The combination of Tiger·tec Gold coating and a coated carbide substrate is engineered for the thermal and mechanical demands of machining steel (ISO P). The grade offers a balanced microstructure — wear-resistant where needed and sufficiently tough to resist chipping — which translates directly into longer tool life and fewer changeovers. With the FP5 chipbreaker, chip control is optimised for common turning conditions in unalloyed and alloyed steels, reducing interruptions caused by poor chip evacuation and improving cycle times. This results in a measurable uplift in process efficiency when compared with conventional grades. Stable cutting edge and predictable process security A 0° (negative) relief angle and a 1.2 mm corner radius provide a robust cutting geometry that resists edge deformation under intermittent cuts or heavy engagement. The insert’s tolerance class M ensures consistent seating and repeatable results across index changes, supporting tight production tolerances. These design choices reduce the risk of edge failure and enable higher feed rates without compromising surface finish. The result is a more predictable machining process, which is particularly valuable in series production and when machining variable steel batches. Practical indexing and straightforward integration into workflows The 60° triangular form gives three usable cutting edges per insert, making it economical to stock and quick to replace in standard TNMG toolholders. The plate size (16) and plate thickness (04) align with common holder families, easing retrofits and inventory management. Thanks to the FP5 breaker and the grade’s behaviour with steel, finishing passes can achieve consistent surface quality while roughing benefits from stable chip formation. For complex requirements or toolpath optimisation, expert application advice is available to match the insert to the machine, holder and cutting parameters. For high-performance steel turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 — to select the optimal TNMG insert and cutting data for the application. Technical data SKU: TNMG160412-FP5-WPP10G-WALTER Article: TNMG160412-FP5 WPP10G Product type: Turning indexable insert Brand: Walter Tools Facts Corner radius: 1.2 mm Size: 16 mm Thickness: 4 mm Relief angle: 0° (negative) Shape: Triangle 60° Tolerance class: M Grade: WPP10G Series: Tiger·tec Gold Special features Coating: Tiger·tec Gold Substrate: Coated carbide Chipbreaker: FP5 Application: Steel (ISO P) Designation without grade: TNMG160412-FP5 Full designation: TNMG160412-FP5 WPP10G FAQ Is this insert suitable for general steel turning tasks? The TNMG160412-FP5 WPP10G is tailored for steel (ISO P) applications; the Tiger·tec Gold coating and FP5 chipbreaker make it suitable for both roughing and finishing in unalloyed and alloyed steels. What benefits does the FP5 chipbreaker provide? FP5 delivers controlled chip formation and improved evacuation in typical steel turning conditions, helping to maintain stable cutting forces and reliable surface finish. How many cutting edges are available per insert? The triangular 60° form offers three indexable cutting edges, enabling economical utilisation and quick replacement in compatible TNMG holders. Does the insert tolerate interrupted cuts and heavier engagement? Yes; the negative relief angle and 1.2 mm corner radius provide a robust edge that withstands intermittent loading and allows conservative increases in feed without rapid edge wear. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with Metav Werkzeuge. The offered article is an original, factory-new product of the manufacturer.
TNMG160412-FP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold wear resistance together with the FP5 chipbreaker and a 1.2 mm corner radius for consistent, productive machining of steel components; order or request machining advice via Metav Werkzeuge for optimal cutting parameters and availability. TNMG160412-FP5 WPP20G turning insert — Tiger‑tec Gold, FP5 chipbreaker (Walter Tools) The TNMG160412-FP5 WPP20G is a triangular 60° indexable insert engineered for productive turning of steel, combining a Tiger‑tec Gold coated carbide grade with a chipbreaker optimised for stable chip control Tiger‑tec Gold coating for long tool life Grade WPP20G optimised for steel machining Triangular 60° shape with 1.2 mm radius FP5 chipbreaker for controlled chips Increased productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP20G grade provides improved wear resistance and consistent edge life when machining steels. This coated carbide formulation is designed to handle the heat and typical chip forms encountered in ISO P work, which reduces unscheduled tool changes and helps maintain component tolerances across longer production runs. The result is a lower cost per part and more predictable process windows for serial turning tasks. Robust geometry for stable cutting and surface quality A triangular 60° insert form with a 1.2 mm corner radius and 0° negative relief offers a balance of edge strength and versatility. The geometry supports medium to heavy turning operations without sacrificing surface finish; the triangular shape also provides multiple usable cutting edges, allowing economical indexation in workshop practice. The FP5 chipbreaker supports reliable chip segmentation and evacuation, which helps prevent built-up edge and contributes to consistent workpiece surfaces. Clear application guidance and material suitability This indexable insert is specified for steel applications (ISO P group), covering unalloyed and alloyed steels where a mix of wear resistance and toughness is required. The coated carbide construction is suited to typical turning operations where thermal loads and continuous cut conditions occur. For selection between grades and to define cutting data for specific steel grades or lathe setups, Metav Werkzeuge can provide tailored recommendations and help match the insert to the intended spindle speed and feed values. For tailored advice on Walter Tools Tiger‑tec Gold inserts and to check stock or delivery options, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical Data SKU: TNMG160412-FP5-WPP20G-WALTER Designation: TNMG160412-FP5 WPP20G Brand: Walter Tools Key Dimensions Plate size: 16 Plate thickness: 04 Corner radius: 1.2 mm Shape: Triangular 60° Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: FP5 Material applicability: Steel (ISO P) Execution: G Base designation without grade: TNMG160412-FP5 FAQ What materials is this insert suitable for? The Walter Tools turning insert TNMG160412-FP5 WPP20G is optimised for ISO P materials, primarily unalloyed and alloyed steel, and is designed to handle the associated heat and chip formation typical of steel turning. What does the grade WPP20G indicate? WPP20G is a Walter Tools grade within the Tiger‑tec Gold family; it denotes a coated carbide formulation intended for general steel machining, offering a balance of wear resistance and toughness. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and improving process reliability during continuous turning operations. What cutting geometry benefits does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge strength for stable turning and supports decent surface finish; it is suitable for medium turning passes where robustness is required without overly compromising detail or form accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer.
TNMG160412-MK5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, predictable chip control and stable cutting geometry for efficient cast iron turning. The Tiger‑tec Silver coating and the MK5 chipbreaker together extend tool life and reduce secondary operations. Order directly via Metav Werkzeuge or consult Metav Werkzeuge for application support. TNMG160412-MK5 WKK10S — Turning indexable insert, Tiger‑tec Silver coating, for cast iron (Walter Tools) The TNMG160412-MK5 WKK10S is a triangular 60° coated carbide insert designed for productive turning of cast iron, offering a robust edge and consistent chip formation for industrial turning applications. Tiger‑tec Silver coating for abrasion resistance Optimised for cast iron applications Corner radius 1.2 mm for stable cutting Chipbreaker MK5 for controlled chip formation Higher productivity through wear-resistant cutting technology The combination of Tiger‑tec Silver coating and the WKK10S grade provides enhanced resistance to abrasive wear typical of cast iron machining. The coated carbide substrate reduces flank wear and maintains edge integrity over longer tool life, which translates into fewer tool changes and more uninterrupted machining time. Using a coated grade specifically tuned for cast iron means the manufacturing process benefits from consistent component quality and reduced finishing passes, supporting higher throughput in serial production. Predictable chips and secure process behaviour for safer machining The integrated MK5 chipbreaker is engineered to break and evacuate the short, brittle chips produced when turning cast iron, improving surface quality and reducing the risk of chip-related interruptions. With a corner radius 1.2 mm and a 0° negative rake, the geometry offers a controlled engagement with the workpiece, delivering stable cutting forces and improved cycle-time predictability. These features assist in maintaining a reliable process window, particularly under interrupted cuts or heavy roughing conditions. Cost-effectiveness through multiple usable edges and consistent tolerances The triangular 60° insert shape delivers three indexed cutting corners, enabling efficient use of the insert stock and straightforward re-indexing on toolholders. The tolerance class M ensures dimensional consistency for repeatable set-ups and predictable runout behaviour in high-volume environments. As a turning indexable insert manufactured by Walter Tools, this solution balances durability and productivity, lowering overall cost per part when integrated into standard turning tool systems. For application advice or to discuss quantities of the Walter Tools TNMG160412-MK5 WKK10S turning indexable insert, contact Metav Werkzeuge for technical support and order coordination at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG160412-MK5-WKK10S-WALTER Designation: TNMG160412-MK5 WKK10S Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Insert size: 16 Thickness: 04 Corner radius: 1.2 mm Rake angle: 0° (negative) Shape: triangular 60° Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide, WKK10S) Chipbreaker: MK5 Material application: cast iron (K) Series note: WKK10S tuned for abrasive wear and short breaking chips Form: TNMG160412-MK5 FAQ What materials is this insert suited for? The TNMG160412-MK5 WKK10S turning indexable insert from Walter Tools is optimised for cast iron machining and is specified for the K material group in ISO 513. How does the MK5 chipbreaker improve machining? The MK5 chipbreaker on the Walter Tools insert shapes and breaks chips typical of cast iron, improving evacuation and reducing surface blemishes while supporting continuous running. What advantages does the Tiger‑tec Silver coating offer? The Tiger‑tec Silver coating on the WKK10S grade increases abrasion resistance and thermal stability, extending the service life of the Walter Tools insert under abrasive cast iron cutting conditions. Is the corner radius suitable for roughing operations? The corner radius 1.2 mm provides a robust cutting edge suitable for roughing and medium finishing, offering improved edge strength and reduced edge chipping during heavier cuts. Can the insert be indexed for multiple edges? Yes, the triangular 60° geometry allows three usable cutting corners per insert, enabling economical re-indexing and reduced tooling costs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, factory-new product from the manufacturer.
TNMG160412-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating for improved wear resistance, the WKK20S grade optimised for cast iron, and the 60° triangular form with a 1.2 mm corner radius for stable chip control and consistent productivity. Order the TNMG160412-MK5 WKK20S directly via Metav Werkzeuge or consult the technical team for application support. TNMG160412-MK5 WKK20S — Turning insert TNMG160412-MK5, WKK20S grade for cast iron by Walter Tools TNMG160412-MK5 WKK20S is a triangular indexable insert designed for productive cast-iron turning with a Tiger·tec Silver coating Tiger·tec Silver coating for wear resistance Optimised for cast iron (ISO K) 60° triangle with 1.2 mm corner radius Negative rake 0° for robust cutting Increased process reliability through tailored coating and grade The combination of the Tiger·tec Silver technology and the WKK20S carbide grade delivers a balance between wear resistance and toughness that is particularly suited to abrasive cast-iron materials. The advanced coating reduces flank wear and maintains a stable cutting edge over longer tool life, which translates directly into higher component consistency and fewer insert changes. Operators unfamiliar with coated carbide will benefit from the predictable wear behaviour: the coating acts as a protective layer while the substrate provides the toughness needed for interrupted cuts typical in cast-iron machining. Stability and chip control for efficient productivity The MK5 chipbreaker integrated in this insert is tuned for the brittle, short-chip behaviour of cast iron. Combined with the 1.2 mm corner radius and a 60° triangular shape, the insert promotes reliable chip formation and evacuation, reducing the risk of surface damage and tool holder interference. The 0° (negative) rake increases strength at the cutting edge, allowing for higher feed rates and improved tool life under heavy interrupted cuts. For production environments seeking reproducible cycle times, these design features reduce downtime and improve throughput. Practical fitment and application guidance for workshop use The insert conforms to the TNMG geometry family and is compatible with standard TNMG toolholders, offering simple integration into existing toolsets. The thickness and form factor suit conventional turning operations on cast-iron workpieces where abrasive wear is the main challenge. For users assessing process windows, the insert supports a range of cutting conditions: from light finishing to more aggressive roughing passes, always prioritising stable edge performance and consistent surface quality. Where uncertainty exists about holder selection or cutting parameters, Metav Werkzeuge can provide pragmatic setup recommendations to match machine capability and workpiece demands. For reliable cast-iron turning with Walter Tools’ Tiger·tec Silver technology, contact Metav Werkzeuge for order placement or application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TNMG160412-MK5-WKK20S-WALTER Product designation: TNMG160412-MK5 WKK20S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK20S Facts Insert size: 16 Thickness: 04 Corner radius: 1.2 mm Plate form: Triangle 60° Free cutting angle: 0° (negative) Chipbreaker: MK5 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Material group suitability: Cast iron (ISO K) Execution: G Material code: K ISO designation: TNMG160412-MK5 WKK20S FAQ What materials is this insert designed for? The TNMG160412-MK5 WKK20S from Walter Tools is optimised for cast iron (ISO group K), with the WKK20S grade tuned to resist abrasive wear typical of those materials. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on this turning insert reduces flank wear and improves heat resistance, which extends effective tool life and supports consistent surface quality across production batches. Is the insert compatible with standard TNMG toolholders? Yes, the TNMG geometry is industry standard; the TNMG160412-MK5 WKK20S fits common TNMG toolholders used for external turning operations. What advantages does the MK5 chipbreaker provide? The MK5 chipbreaker is configured for short, brittle chips from cast iron, promoting controlled chip formation and reliable evacuation to prevent surface damage and holder interference. Can this insert be used for roughing and finishing? The design of the TNMG160412-MK5 WKK20S allows for a broad application range—from more aggressive roughing passes to finishing—by selecting appropriate feeds and speeds while benefiting from the robust 0° negative rake edge. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160412-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP20G grade for reliable chip formation and prolonged cutting life in rostfreier Stahl applications; order directly via Metav Werkzeuge or contact our consultants for application advice. TNMG160412‑MM5 WMP20G Drehwendeschneidplatte – Tiger·tec Gold for rostfreier Stahl (Walter Tools) The TNMG160412‑MM5 WMP20G is a triangular indexable insert designed for turning rostfreier Stahl under medium to robust cutting conditions, offering secure chip control and a durable cutting edge. Tiger·tec Gold coating for extended life WMP20G grade for rostfreie Stähle MM5 chipbreaker for secure chip control Negative 0° rake for interrupted cuts Consistent performance in rostfreier Stahl turning The combination of the WMP20G cutting grade and the Tiger·tec Gold series is engineered for the specific demands of rostfreier Stahl, which typically produces tough, ductile chips and elevated temperatures during cutting. The coated carbide substrate and surface engineering support stable chip formation, reducing build‑up on the edge and keeping machining cycles consistent. This results in more predictable tool change intervals and less scrap from poor surface integrity, delivering measurable productivity improvements on stainless turning tasks. Robust geometry for interrupted and heavy cuts A negative 0° rake and the triangular 60° insert form give the insert a mechanically strong cutting edge that tolerates interrupted cuts and heavier feed rates without compromising edge stability. The corner radius 1.2 mm contributes to a balance between edge strength and surface finish; a larger radius improves edge life while maintaining acceptable component quality. The MM5 chipbreaker is optimised for secure chip control in demanding conditions, which lowers the risk of entanglement and supports automatic chip evacuation in production environments. Economic benefits through longer tool life and process reliability Using a coated carbide grade tailored to rostfreie Stähle ensures longer tool life and steadier cutting performance, translating into lower tool consumption and fewer unplanned stops. The insert's design supports predictable wear progression, enabling planned tool changes and improved machining throughput. For procurement and production planning, the clear specification of grade and geometry simplifies tool selection and reduces trial cycles, helping to keep machining costs under control without sacrificing part quality. Contact Metav Werkzeuge for tailored machining recommendations on the Walter Tools TNMG160412‑MM5 WMP20G insert and advice for optimising rostfreier Stahl turning, or reach out via info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: TNMG160412‑MM5‑WMP20G‑WALTER Name: TNMG160412‑MM5 WMP20G Product type: Drehwendeschneidplatte (indexable insert) Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 16 mm Corner radius: 1.2 mm Plate thickness: 04 Free angle: 0° (negative) Plate shape: Triangle 60° Tolerance class: M Special features Grade: WMP20G Chipbreaker: MM5 Coating/series: Tiger·tec Gold Material base: coated carbide Application: suitable for rostfreier Stahl FAQ What materials is this insert suitable for? The TNMG160412‑MM5 WMP20G insert is specified for rostfreier Stahl and performs reliably under medium to robust cutting conditions. How does the negative 0° rake affect machining? A negative 0° rake strengthens the cutting edge for interrupted cuts and heavier feeds; the Walter Tools insert maintains edge stability while supporting consistent surface quality. Which chip behaviour can be expected with the MM5 breaker? The MM5 chipbreaker on this insert promotes secure chip formation and evacuation during rostfreier Stahl turning, reducing entanglement and improving process stability. Can this insert be used for high‑speed finishing? The WMP20G grade and Tiger·tec Gold coating are optimised for durability and chip control rather than ultra‑high‑speed finishing; consult Metav Werkzeuge for parameter tuning to balance speed and tool life. What does the designation TNMG160412‑MM5 indicate? The ISO code describes the insert geometry (triangular 60°), size (16 mm), corner radius (1.2 mm) and the fitted chipbreaker (MM5), enabling straightforward matching to appropriate tool holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG brand appearance (Walter Tools) is part of a global family of precision tooling providers. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and those trademark holders.
TNMG160412-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WMP20S grade for controlled chip formation and extended edge life in stainless-steel turning; the triangular geometry with a 1.2 mm corner radius provides secure seating and repeatable performance. Order the TNMG160412-MM5 WMP20S directly via Metav Werkzeuge or ask our consultants if needed. TNMG160412-MM5 WMP20S triangular turning insert, Walter Tools — Tiger·tec Silver for stainless steel The TNMG160412-MM5 WMP20S is a triangular 60° indexable turning insert designed for productive machining of stainless steel under medium to robust cutting conditions. Tiger·tec Silver coating for wear resistance WMP20S grade optimised for stainless steel Triangular 60° form with 1.2 mm corner radius Negative 0° rake for stable cutting High wear resistance for reliable stainless-steel turning The coated-carbide composition from the Tiger·tec Silver series is engineered for reliable performance when machining stainless steel. The WMP20S grade is a coated carbide variant that supports secure chip formation and a stable cutting edge under the high temperatures and adhesive tendencies typical of this material group. This results in longer cutting intervals and fewer unplanned tool changes, contributing to improved process efficiency and predictable cycle times. Geometry and chip control that improve surface quality The triangular 60° plate form combined with the MM5 chipbreaker and a 1.2 mm corner radius is designed to balance strength and finish. The negative 0° rake increases edge robustness and reduces the risk of chipping on interrupted cuts or heavy engagement, while the chipbreaker directs swarf away from the workpiece to reduce recutting. Together, these features support consistent dimensional accuracy and an improved surface finish on turned components. Suited for medium to robust machining — stable productivity Selected for ISO group M materials, the insert is intended where moderate to robust cutting parameters are required. The chosen grade and coating provide good resistance to adhesive wear and thermal load, which helps to maintain cutting-edge integrity over repeated cycles. The result is enhanced process security and predictable tool life, which can lower overall machining costs through reduced downtime and fewer insert changes. Practical fitment and identification for workshop planning This item is offered in the common TNMG format and is identified by the code TNMG160412-MM5 WMP20S (Walter Tools). The plate is supplied in the triangular 60° form with the size designation 16 and thickness code 04; the chipbreaker type is MM5 and the grade is WMP20S from the Tiger·tec Silver series. Compatibility with standard TNMG toolholders enables straightforward replacement, inventory management and rapid setup in production cells. For precision stainless-steel turning tasks request the Walter Tools TNMG160412-MM5 WMP20S from Metav Werkzeuge or consult our specialists to integrate the insert into existing processes. Technical Data Article number: TNMG160412-MM5-WMP20S-WALTER Label: Drehwendeschneidplatte TNMG160412-MM5 WMP20S Walter Tools Manufacturer: Walter Tools Product type: Turning insert Series: Tiger·tec Silver Facts Inscribed circle / size: 16 Corner radius: 1.2 mm Thickness code: 04 Clearance/rake angle: 0° (negative) Special features Grade: WMP20S Chipbreaker: MM5 Coated carbide construction Plate form: Triangular 60° Application group: ISO M (stainless steel) FAQ What materials is this insert intended for? This insert is specified for ISO group M, which covers stainless steel machining; the WMP20S grade and Tiger·tec Silver coating support secure chip formation when turning these materials. How does the negative 0° rake affect cutting performance? A negative 0° rake increases edge strength and is beneficial for interrupted cuts or robust machining; the TNMG160412-MM5 WMP20S uses this geometry to reduce chipping risk while maintaining stability. Which chipbreaker is fitted and what is its benefit? The insert features the MM5 chipbreaker, which is designed to control swarf in turning operations and to promote consistent chip flow, helping preserve surface quality and reduce recutting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. Brand names and protected designations are cited for clarification only; there is no connection between Metav Werkzeuge and the named brands beyond product distribution. The offered article is an original, brand-new product direct from the manufacturer.
TNMG160412-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver cutting grade and the robust triangular geometry to achieve consistent edge stability and secure chip formation when machining stainless steels and heat‑resistant superalloys; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. TNMG160412‑MM5 WSM10S turning insert for stainless steels and superalloys — Walter Tools A TNMG160412‑MM5 WSM10S turning insert designed for secure, productive machining of stainless steels and heat‑resistant superalloys in industrial turning applications. TNMG160412‑MM5 WSM10S by Walter Tools Tiger‑tec Silver coated carbide grade Dedicated for stainless steels and superalloys 60° triangle, 1.2 mm corner radius Proven cutting performance for demanding materials The combination of the Tiger‑tec Silver technology and the WSM10S coating produces a coated carbide surface engineered for elevated temperatures and mechanical stress. This results in stable cutting edges and reduced tendency for built‑up edge when machining ISO group M (stainless steels) and S (superalloys, titanium) materials. The integrated MM5 chipbreaker supports predictable chip formation, which helps maintain cycle times and reduces secondary operations caused by poor chip control. As a consequence, process reliability improves and tool life becomes more consistent across batch‑sized productions. Robust geometry that improves edge life and surface quality The insert’s 60° triangle form combined with a 1.2 mm corner radius and a negative 0° rake provides a mechanically strong cutting edge that withstands interrupted cuts and moderate heavy cutting conditions. The negative rake enhances edge toughness, reducing the risk of chipping during roughing, while the corner radius contributes to improved surface finish in semi‑finishing steps. This geometry is particularly suited to shoulder cuts and face turning where a balance between strength and finish is required, enabling efficiency gains through fewer tool changes and more reliable surface results. Integration and process benefits for workshop productivity Designed as a TNMG‑type indexable insert, the component fits a wide range of standard toolholders for turning operations and is supplied in tolerance class M for consistent interchangeability. The designation TNMG160412‑MM5 indicates the form and chip‑control features, while the nominal size 16 and insert thickness 04 align with common holder standards. Using such a standardised insert reduces set‑up time and simplifies inventory management. Overall, the insert supports a predictable machining process, lowers scrap risk and contributes to steady production throughput in shops working with corrosion‑resistant and heat‑resistant alloys. For a technical appraisal of Walter Tools TNMG160412‑MM5 WSM10S inserts and to discuss supply and application-specific cutting data, contact Metav Werkzeuge today via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (SKU): TNMG160412‑MM5‑WSM10S‑WALTER Description: Drehwendeschneidplatte TNMG160412‑MM5 WSM10S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Corner radius: 1.2 mm Plate form: Triangle 60° Clearance angle: 0° (negative) Size: 16 Thickness: 04 Chipbreaker: MM5 Tolerance class: M Special features Coating/grade: WSM10S (Tiger‑tec Silver coated carbide) Material groups: M, S (stainless steels; superalloys and titanium) Robust edge for interrupted cuts and shoulder turning Standard TNMG indexable insert format for common holders FAQ Which materials are best suited for this insert? The TNMG160412‑MM5 WSM10S insert from Walter Tools is optimised for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering heat‑resistant cutting performance and reliable chip control. What does the MM5 chipbreaker provide? The MM5 chipbreaker promotes controlled, short chips in the specified material groups, improving swarf management and reducing the risk of entanglement during turning operations with the TNMG160412‑MM5 insert. How does the negative 0° rake affect cutting? A negative 0° rake increases edge strength and fracture resistance; in practice, the Walter Tools TNMG160412‑MM5 insert resists chipping under interrupted or heavy cutting conditions while still delivering acceptable surface quality. Is the insert compatible with standard TNMG holders? Yes, the TNMG160412‑MM5 format corresponds to widely used TNMG indexable holders; dimensioning (size 16, thickness 04, tolerance class M) supports straightforward interchangeability and predictable seating. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new from the manufacturer.
TNMG160412-MM5 WSM20S G Wendeplatten - Walter Tools
Take advantage of high wear resistance and stable chip formation together with a geometry optimised for demanding turning tasks; the combination of Tiger·tec Silver coating and the WSM20S grade ensures secure cutting edges in heat‑generating materials and supports a smooth production flow—order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160412-MM5 WSM20S indexable turning insert, triangle 60°, Tiger·tec Silver – Walter Tools A TNMG160412-MM5 WSM20S indexable turning insert designed for heavy‑duty cutting of rostfreiem Stahl (stainless steels) and heat‑resistant superalloys, offering a negative 0° rake and a 1.2 mm corner radius for robust edge life TNMG160412-MM5 format, triangle 60° Tiger·tec Silver coating WSM20S grade Corner radius 1.2 mm for stable edges Suitable for stainless steels and superalloys Reliable performance with high thermal stability The insert combines a coated carbide grade from the Tiger·tec Silver family with the WSM20S specification to deliver consistent cutting performance where temperatures and stickiness challenge tool life. The combination of coating technology and substrate provides enhanced resistance to abrasion and built‑up edge, which results in longer productive cutting intervals and fewer insert changes. This leads to measurable process stability and reduced downtime in serial turning operations on stainless steels and heat‑resistant alloys. Consistent chip control and edge security for tough materials Equipped with the MM5 chipbreaker and a negative 0° rake, the insert promotes predictable chip formation under high thermal loads typical of inox and superalloy machining. The corner radius 1.2 mm supports a robust cutting edge suitable for semi‑roughing to finishing passes, helping to maintain dimensional consistency and surface quality. For engineers requiring reproducible results, these design choices reduce the risk of edge failure and support higher metal removal rates without compromising component integrity. Geometry and handling that speed setup and interchange The triangle 60° configuration provides three usable corners per insert, improving tool utilisation and lowering tooling consumption per workpiece. The standard TNMG form factor allows direct fitment into common turning toolholders, simplifying stock management and changeover. The insert thickness and form promote stable clamping and accurate seating, which aids repeatable setups and contributes to reduced cycle time in multi‑shift environments. Application guidance and process benefits Intended primarily for ISO groups M and S, the grade is optimised for rostfreiem Stahl and heat‑resistant superalloys and titanium where thermal and adhesion challenges occur. In practice, this results in improved flank wear behaviour and more reliable surface finishes on components that demand high consistency. If a reduced cutting force or different surface requirement is needed, consider complementary geometries or alternative grades within the Tiger·tec Silver series to balance economy and finish. Discuss application specifics and stock availability with Metav Werkzeuge – contact info@metav-werkzeuge.com or call +49 2822 7131930 to identify the ideal insert grade and ensure immediate delivery Technical data Article number: TNMG160412-MM5-WSM20S-WALTER Product name: Drehwendeschneidplatte TNMG160412-MM5 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Insert size: 16 mm Plate thickness: 4 mm Corner radius: 1.2 mm Insert form: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Chipbreaker: MM5 Features and applications Grade: WSM20S (coated carbide) Coating technology: Tiger·tec Silver Suitable for: stainless steels (ISO M) Also suitable for: heat‑resistant superalloys and titanium (ISO S) Typical use: turning operations requiring stable cutting edges and secure chip formation FAQ Which materials is this insert intended for? The TNMG160412‑MM5 WSM20S insert is formulated for rostfreiem Stahl (stainless steels) and is also suitable for heat‑resistant superalloys and titanium, reflecting its designation for ISO groups M and S. What are the key geometry features that affect performance? The combination of a triangle 60° form, corner radius 1.2 mm and negative 0° rake gives the insert mechanical robustness and reliable seating, which supports process stability during demanding turning tasks. How does the MM5 chipbreaker influence machining? The MM5 chipbreaker promotes predictable chip formation under high thermal load conditions, helping to avoid build‑up on the cutting edge and improving surface integrity on hard‑to‑cut materials. Is this insert compatible with standard TNMG toolholders? Yes, the dimensions conform to the TNMG family, enabling direct interchange with common TNMG‑compatible turning toolholders for straightforward setup and replacement. What advantages does the Tiger·tec Silver technology provide? Tiger·tec Silver provides a robust coating and substrate pairing that enhances wear resistance, improves edge stability and extends productive tool life in applications where heat and adhesion challenge conventional grades. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer.
TNMG160412-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WSM30S grade optimised for high heat and toughness, and a robust triangular geometry to secure stable chip formation and longer tool life in demanding turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application support. TNMG160412-MM5 WSM30S turning insert — Tiger·tec Silver, 1.2 mm corner radius (Walter Tools) The TNMG160412-MM5 WSM30S is a triangular indexable turning insert designed for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering a negative rake for robust cutting and reliable edge integrity Tiger·tec Silver coating for heat resistance Optimised for rostfreier Stahl and superalloys Triangle 60° with 1.2 mm corner radius 0° negative rake for robust cutting edges High-performance grade for demanding materials The WSM30S grade from the Tiger·tec Silver family delivers a balanced mix of wear resistance and edge stability for the toughest alloys. Designed to handle the thermal and mechanical stresses typical of rostfreier Stahl and heat-resistant superalloys, the carbide composition and coating combination support stable chip formation and reduce the tendency to build up material on the cutting edge. This results in more consistent part quality and fewer interrupted cycles in serial production. Robust geometry that preserves edge life A triangular 60° geometry with a 1.2 mm corner radius and a 0° negative rake provides mechanical strength at the cutting edge while maintaining acceptable cutting forces. The MM5 chipbreaker promotes predictable chip control in medium to heavy cuts, lowering the risk of re-cutting and surface damage. For operations where edge security and repeatable performance are critical, this geometry facilitates longer effective tool life and reduced downtime for insert changes. Process benefits: precision and productivity Using an insert from the Tiger·tec Silver series helps to keep process windows stable under elevated temperatures and varying feed rates. The combination of the WSM30S grade and the engineered chipformer supports a consistent surface finish and dimensional accuracy in turning tasks, which reduces rework and inspection effort. In batch production, these advantages translate into measurable productivity gains and improved throughput without sacrificing component quality. Practical notes on use and integration The insert is supplied in the ISO designation TNMG160412-MM5 WSM30S and fits standard triangular indexable holders that accept the TNMG family. The plate thickness code and size follow industry conventions and the tolerance class M signifies consistent manufacturing precision. When integrating into a tooling layout, select holders and clamping that maintain stable clamping pressure to exploit the insert’s edge stability and chip control features. Contact Metav Werkzeuge today to specify the TNMG160412-MM5 WSM30S for production or to request application guidance from the technical team. Technical Data Article number: TNMG160412-MM5-WSM30S-WALTER Designation: TNMG160412-MM5 ISO designation: TNMG160412-MM5 WSM30S Brand: Walter Tools Product type: Indexable turning insert Facts Corner radius: 1.2 mm Geometry: Triangle 60° Relief angle: 0° (negative) Chipbreaker: MM5 Plate size: 16 Plate thickness code: 04 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM30S (coated carbide) Material suitability: S / M Application focus: rostfreier Stahl and heat-resistant superalloys Execution: G FAQ What materials is this insert suitable for? The TNMG160412-MM5 WSM30S is intended for machining rostfreier Stahl and heat-resistant superalloys, benefiting from the Tiger·tec Silver coating and the WSM30S grade. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker supports controlled chip formation in medium to heavy turning cuts, improving chip evacuation and protecting the cutting edge of the TNMG160412-MM5 WSM30S. What is the significance of the 0° negative rake? A 0° negative rake increases edge strength and resistance to mechanical shock, making the insert more robust in interrupted cuts and tough material conditions. Which tool holders are compatible with this insert? Compatibility follows the TNMG family standard; the insert fits indexable turning holders designed for TNMG geometry and size, ensuring proper clamping and alignment. Does the Tiger·tec Silver series offer thermal advantages? Yes, the Tiger·tec Silver coating enhances thermal resistance and wear protection, contributing to longer cutting-edge life when machining demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners and are used for descriptive purposes only. There is no affiliation or endorsement implied between Metav Werkzeuge GmbH and the manufacturers named above. The offered article is an original, factory-new product of the stated manufacturer.
TNMG160412-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the MP3 chipformer for consistent chip control and extended tool life; the triangular 60° geometry with a 1.2 mm corner radius and 0° negative rake ensures stable cutting when machining steel—order directly via Metav Werkzeuge or consult the team for application advice. TNMG160412-MP3 WPP10G – Turning insert for steel machining, Tiger‑tec Gold (Walter Tools) The TNMG160412-MP3 WPP10G is a triangular 60° indexable turning insert designed for robust steel machining, offering a coated‑carbide grade optimised for wear resistance and reliable chip control in production environments. Tiger‑tec Gold coating for long tool life MP3 chipformer for controlled chip breaking 60° triangle form with 1.2 mm corner radius 0° negative rake for stable cutting action Durable coating and grade for predictable productivity The coated carbide grade WPP10G, part of the Tiger‑tec Gold series, provides a balance of wear resistance and toughness optimised for machining steel (ISO P). The combination of a modern coating technology and a purpose‑designed substrate reduces flank wear and supports longer indexable‑insert life, which translates into fewer tool changes and a more uninterrupted production flow. Emphasis on stable wear behaviour makes this insert suitable for batch production as well as single‑piece manufacturing where process consistency is essential. Geometry and chip control that improve process stability The triangular 60° form with a 1.2 mm corner radius and the MP3 chipbreaker deliver predictable chip formation and evacuation during turning operations. The 0° negative rake gives the insert a robust cutting edge that resists chipping under heavy or interrupted cuts, while the MP3 geometry controls chip shape to reduce the risk of entanglement and machine downtime. These geometric choices support higher metal‑removal rates without compromising surface integrity or dimensional repeatability. Application benefits and handling in the toolroom Designed specifically for P‑group materials, this indexable insert is appropriate for a wide range of steel grades, from general structural steels to alloyed types requiring consistent thermal and mechanical response. The insert’s size and thickness provide mechanical stability in standard toolholders, and the M tolerance class ensures predictable seating and runout behaviour. For operations seeking a dependable combination of tool life and process reliability, this insert represents a practical choice that helps to simplify tooling inventories and shorten setup time. For application advice or to secure stock of the Walter Tools TNMG160412-MP3 WPP10G turning insert, contact Metav Werkzeuge for tailored recommendations and rapid delivery: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: TNMG160412-MP3-WPP10G-WALTER Article name: Drehwendeschneidplatte TNMG160412-MP3 WPP10G Walter Tools Product type: Turning insert (indexable insert) Grade: WPP10G Series: Tiger‑tec Gold Facts Inscribed circle / size: 16 mm Thickness: 04 (≈ 4 mm) Corner radius: 1.2 mm Insert angle: 60° Rake: 0° (negative) Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: MP3 Application: Steel (ISO P) Tolerance class: M Form: Triangle 60° Manufacturer: Walter Tools FAQ What materials is this insert recommended for? The TNMG160412‑MP3 WPP10G insert is specified for steel (ISO P) applications and is designed to handle the typical heat and chip characteristics encountered when machining unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP10G grade increases wear resistance and supports stable cutting performance, which helps extend tool life and reduce the frequency of indexable‑insert changes in Walter Tools turning operations. Which chipformer does this insert use and why is it important? This insert features the MP3 chipbreaker, which provides controlled chip formation and evacuation to minimise chip interference and enhance process stability during turning. Is the insert suitable for heavy roughing cuts? With a 0° negative rake and a 1.2 mm corner radius, the design offers a robust cutting edge that is well suited to heavier or interrupted cuts where edge strength and resistance to chipping are required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only and do not indicate any affiliation. The offered item is original, brand‑new merchandise from Walter Tools.
TNMG160412-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger-tec Gold coating, a WPP20G grade optimised for steel, and precise MP3 chip control for stable, productive turning. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. TNMG160412-MP3 WPP20G — Walter Tools turning indexable insert with Tiger-tec Gold for steel The TNMG160412-MP3 WPP20G is a triangle 60° turning insert designed for high-process security in steel turning, featuring the Tiger-tec Gold coating technology and an MP3 chipbreaker for reliable chip formation. Triangle 60° geometry for versatile turning Tiger-tec Gold coating for extended tool life WPP20G grade optimised for steel machining MP3 chipbreaker ensures stable chip control Consistent performance for steel turning and higher productivity The coated carbide composition of the insert, identified by the Tiger-tec Gold technology and the WPP20G grade, is engineered specifically for machining steels (ISO group P). The combination of coating and substrate produces stable chip formation and improved wear resistance, which translates into fewer interruptions and a more predictable process. This rational advantage supports higher throughput and reduces the frequency of tool changes. The insert’s engineered balance between wear resistance and toughness (rating: wear-oriented and universal characteristics) makes it suitable for a broad range of steel turning tasks without sacrificing component quality. Robust geometry that supports accuracy and edge life A triangle 60° plate form with a corner radius of 1.2 mm and a 0° (negative) free angle delivers robustness at the cutting edge and consistent surface results. The geometry provides multiple usable cutting edges, helping to extend service intervals, while the MP3 chipbreaker is optimised for controlled swarf evacuation during medium to heavy cuts. These features together reduce the risk of edge chipping and contribute to repeatable dimensional accuracy, which is particularly valuable in batch production and mixed-series workshops where process stability is essential. Application guidance and process security in practical terms The insert is intended primarily for machining steel, including unalloyed and alloyed steels, and is supplied in tolerance class M with execution G, reflecting standardised dimensional accuracy for general turning operations. As a coated, indexable insert it supports flexible set-ups and predictable wear behaviour across a variety of turning tasks. For planners and operators, the result is better cycle-time consistency and fewer scrapped parts. Where higher demands on surface finish or interrupted cuts occur, pairing the insert with appropriate cutting data and cooling strategies will preserve the edge and maximise the benefit of the Tiger-tec Gold technology. Contact Metav Werkzeuge for application-specific recommendations or to arrange supply of Walter Tools Tiger-tec Gold inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: TNMG160412-MP3-WPP20G-WALTER Article designation: TNMG160412-MP3 WPP20G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger-tec Gold Core specifications Inscribed circle / plate size: 16 Corner radius: 1.2 mm Plate thickness: 04 Free angle: 0° (negative) Plate form: Triangle 60° Special features Grade: WPP20G Chipbreaker: MP3 Tolerance class: M Execution: G Material application: Steel (ISO group P) FAQ What materials is this insert suited for? The TNMG160412-MP3 WPP20G insert from Walter Tools is specified for ISO group P materials, i.e. unalloyed and alloyed steel, and is designed to manage the heat and chip forms typical of steel turning. How does the MP3 chipbreaker affect machining performance? The MP3 chipbreaker promotes controlled chip formation and evacuation, which stabilises cutting forces and reduces the likelihood of built-up edge, improving surface finish and process reliability when using the TNMG160412-MP3 WPP20G. How many usable cutting edges are available on the triangular insert? The triangular 60° geometry provides multiple indexable edges, allowing rotation of the insert to present a fresh cutting edge and thereby extending effective tool life for the turning indexable insert. What advantages does the Tiger-tec Gold coating offer? The Tiger-tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, resulting in more consistent tool life and enhanced productivity during steel machining under varied operating conditions. What does tolerance class M indicate for workshop use? Tolerance class M denotes standard dimensional accuracy suitable for general turning operations; the combination of class M and execution G supports dependable fitting and repeatable positioning in typical toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new Walter Tools goods.
TNMG160412-MP3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, consistent chip control from the MP3 chipbreaker, and a robust triangular form for stable turning of steel. The result is reliable edge life and predictable cycle times — order the TNMG160412-MP3 WPP30G directly via Metav Werkzeuge or consult our technical team for application advice. TNMG160412-MP3 WPP30G — Indexable turning insert, Tiger‑tec Gold (Walter Tools) The TNMG160412-MP3 WPP30G is a triangular indexable turning insert engineered for productive steel machining, combining a coated carbide grade and an MP3 chipbreaker for consistent performance Tiger·tec Gold coating for stable edge life WPP30G grade optimised for steel machining MP3 chipbreaker for reliable chip control Triangle 60° geometry, 1.2 mm corner radius Predictable edge life for more efficient production The coated carbide grade WPP30G, part of the Tiger‑tec Gold series, delivers stable edge life and high process reliability in steel turning. The combination of coating technology and substrate composition reduces flank wear and maintains cutting performance over longer periods, which helps to keep cycle times predictable and tool-change intervals extended. This stability supports planning in serial production and reduces unplanned machine downtime, contributing directly to improved throughput and consistent part quality. Controlled chip formation reduces machine downtime The integrated MP3 chipbreaker is designed for dependable chip control when machining steels according to ISO group P. By shaping chips into manageable segments and directing them away from the cutting zone, the insert reduces the risk of chip re-cutting and tool breakage. The practical benefit is safer turning operations and lower demands on secondary chip-handling systems, meaning fewer interruptions to production and a simpler set-up for automated or manual turning centres. Geometry and dimensions that suit precise turning tasks The triangular 60° geometry with a 1.2 mm corner radius and 4 mm thickness provides a balance between rigidity and versatility. The geometry supports both finishing and light to moderate roughing operations and offers three usable cutting edges per index, which improves cost efficiency per insert. The 0° (negative) rake orientation gives enhanced edge strength for interrupted cuts and tougher steel grades, making the insert a practical choice where robustness and repeatable results are required. Application focus and process advantages Designed specifically for steel applications, this indexable cutting insert supports a wide range of common unalloyed and alloyed steels. The WPP30G grade addresses the thermal and chip-formation characteristics typical of steel turning, offering a versatile solution across workshop tasks. For shops seeking reliable performance without constant regrinding, the insert’s combination of coating, chipbreaker and geometry translates into easier process parameter transfer and fewer trial cycles during process development. For a process-stable steel turning solution from Walter Tools, request the TNMG160412-MP3 WPP30G via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and quick availability. Technical data Article number / SKU: TNMG160412-MP3-WPP30G-WALTER Product name: Drehwendeschneidplatte TNMG160412-MP3 WPP30G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Inscribed circle / size: 16 mm Corner radius: 1.2 mm Thickness: 4 mm Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP30G (coated carbide) Chipbreaker: MP3 Geometry: Triangle 60° Material application: Steel FAQ Which materials is this insert suitable for? The TNMG160412-MP3 WPP30G is designed for machining steels (ISO group P) and is optimised to handle the typical heat and chip-formation characteristics of unalloyed and alloyed steel. What does the WPP30G grade offer in practice? WPP30G is a Walter Tools coated carbide grade from the Tiger‑tec Gold family that provides a balance of wear resistance and toughness, resulting in extended edge life and consistent performance when turning steel. How does the MP3 chipbreaker affect machining? The MP3 chipbreaker promotes segmented chip formation and reliable evacuation, which reduces the risk of chip-related interruptions and improves operator safety during turning operations with this insert. What are the insert geometry and usable edges? The insert has a triangle 60° form with a 1.2 mm corner radius and three cutting edges per insert, offering a stable solution for finishing and moderate roughing in steel. Is the insert configured for interrupted cuts or heavy cuts? With a 0° negative rake and the Tiger‑tec Gold-coated WPP30G grade, the insert is well suited to interrupted cuts and applications requiring a robust cutting edge. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TNMG160412-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Reliable chip control and extended tool life are achieved through the combination of the Tiger·tec Gold coating and the MP5 chipbreaker, delivering efficient turning in steel; order directly via Metav Werkzeuge or contact our consultants for machining recommendations. TNMG160412-MP5 WPP10G – turning insert, Tiger·tec Gold, for steel (Walter Tools) The TNMG160412-MP5 WPP10G is a triangular turning insert engineered for steel turning applications, offering reliable chip control and enhanced wear resistance thanks to Tiger·tec Gold coating. Tiger·tec Gold coating for long tool life Designed for steel machining (ISO P) 1.2 mm corner radius for robust edge Triangle 60° form, 0° negative rake Maximise productivity when turning steel with coated carbide The combination of the Tiger·tec Gold coating and the WPP10G grade is tailored for machining steel (ISO group P), where thermal loads and chip formation demand a balanced substrate and coating system. The coated carbide construction provides a consistent cutting-edge condition that reduces flank wear and helps maintain dimensional accuracy over longer tool life. Using an insert with the MP5 chipbreaker promotes manageable chip shapes at standard feeds and speeds, which supports higher material removal rates without compromising surface finish. This translates directly into fewer tool changes and improved process economy. Stable geometry for repeatable results and secure edges The triangular 60° form with a 1.2 mm corner radius delivers a robust cutting edge that resists chipping under interrupted cuts and uneven workpiece surfaces. The specified 0° (negative) rake increases edge strength for heavier cuts and supports stable cutting forces in roughing operations. The tolerance class M ensures consistent fitment in toolholders, reducing runout and enabling repeatable part-to-part accuracy. Together, these geometric traits minimise downtime through fewer breakages and contribute to a predictable machining performance in series production. Practical integration and machining guidance for the workshop Selecting appropriate feeds and speeds with a coated carbide insert and the MP5 chipbreaker typically allows reliable machining across a broad range of steels, from unalloyed to alloyed grades. Start with conservative parameters and increase cutting speed where coolant and machine rigidity permit; the coating tolerates the heat generated in steel turning while the chipbreaker shapes chips to reduce entanglement. The insert’s size designation (16) and plate thickness (04) fit common toolholder systems, simplifying inventory management. For advice on parameter selection or toolholder compatibility, consult Metav Werkzeuge’s technical guidance to align process settings with production goals. For targeted application advice or to source genuine Walter Tools inserts, contact Metav Werkzeuge for machining recommendations and supply options. Technical data Article number: TNMG160412-MP5-WPP10G-WALTER Designation: TNMG160412-MP5 WPP10G Manufacturer: Walter Tools Facts Applicable material group: P (steel) Chipbreaker: MP5 Grade / coating: WPP10G, Tiger·tec Gold Free rake angle: 0° (negative) Corner radius: 1,2 mm Plate form: Triangle 60° Plate size: 16 Plate thickness: 04 Tolerance class: M Special features Coated hardmetal grade optimised for steel machining Good balance between wear resistance and toughness Effective chip control for typical steel turning operations Suitable for roughing and finishing under appropriate parameters Walter Tools original spare part FAQ What steels is this insert best suited for? The insert is optimised for steels (ISO group P); the WPP10G grade with Tiger·tec Gold coating is designed to handle unalloyed and alloyed steels with stable chip formation. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker shapes chips to be controllable during turning, improving evacuation and reducing the risk of entanglement when using the TNMG160412-MP5 WPP10G insert. Can this insert be used for roughing and finishing? Yes. The 1.2 mm corner radius and 0° negative rake provide a robust edge for roughing while the coated grade supports reasonable finishing when cuts and feeds are adjusted accordingly. What does the tolerance class M mean for toolholders? Tolerance class M indicates a medium tolerance ensuring consistent fit and reliable clamping in compatible toolholders, which helps maintain repeatable machining accuracy. Is this a genuine Walter Tools product? The TNMG160412-MP5 WPP10G is an original Walter Tools turning insert produced to the brand’s quality standards for coated carbide grades. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only and do not indicate any affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
TNMG160412-MP5 WPP20G Wendeplatten - Walter Tools
Efficient machining of steel is achieved through the combination of the WPP20G coated carbide grade and the MP5 chipbreaker, delivering stable chip formation and extended tool life. Order the insert directly via Metav Werkzeuge or consult our experts for recommended cutting data and optimal setup. TNMG160412-MP5 WPP20G – Turning insert, triangular 60°, Tiger·tec Gold by Walter Tools The TNMG160412-MP5 WPP20G is a coated carbide turning insert designed for steel machining, offering reliable chip control and robust edge security in general turning applications. Coated carbide grade WPP20G MP5 chipbreaker for controlled chips 60° triangular shape for versatile turning Corner radius 1.2 mm for strong cutting edges Productive steel turning with Tiger·tec Gold The combination of Tiger·tec Gold technology and the WPP20G grade provides a balance of wear resistance and toughness that is optimised for machining steels (ISO group P). The coated carbide structure reduces flank wear and improves thermal resistance during continuous cutting, which leads to longer tool life and more predictable tool-change intervals. For production environments this translates into fewer interruptions, consistent dimensional accuracy and an overall improvement in process efficiency when paired with appropriate cutting parameters. Secure chip control and stable cutting performance The MP5 chipbreaker geometry is engineered for controlled chip formation in a range of turning operations. Together with the 60° triangular plate form and a corner radius of 1.2 mm, the geometry provides an effective compromise between edge strength and surface finish capability. The insert’s 0° (negative) clearance design increases robustness against interrupted cuts and heavy engagement, while the tolerance class M supports repeatable positioning in standard toolholders. These characteristics result in steady cutting forces and reduced risk of edge chipping under demanding conditions. Practical application and process benefits This grade and geometry are intended specifically for machining Steel according to ISO group P, covering both unalloyed and alloyed steels in typical turning tasks. The coated grade aids in maintaining surface quality over extended tool life, which reduces rework and supports consistent part output. Selection of cutting speeds and feeds should reflect material grade and part requirements; when used as specified, the insert contributes to cost-effective, productive turning by lowering downtime and stabilising cycle times for batch production. For tailored cutting parameters or to specify the Tiger·tec Gold TNMG160412-MP5 WPP20G for a production application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG160412-MP5-WPP20G-WALTER Designation: TNMG160412-MP5 WPP20G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Plate size: 16 Thickness: 04 Corner radius: 1.2 mm Plate form: Triangle 60° Clearance angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Coating/grade: WPP20G (Tiger·tec Gold) Material application: Steel (ISO P) Coated carbide insert Robust edge for interrupted cuts FAQ What materials is this insert suitable for? The TNMG160412-MP5 WPP20G is designed for machining steels (ISO group P); the WPP20G grade and Tiger·tec Gold coating optimise performance for those materials. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this insert promotes predictable chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during steel turning. What does the designation TNMG160412-MP5 mean? The designation describes the triangular 60° plate (TNMG), nominal size (16), encoded thickness/profile (04/12), the MP5 chipbreaker and the specific grade WPP20G as supplied by Walter Tools. Is the insert suitable for interrupted cuts? Yes. The negative 0° clearance and the 1.2 mm corner radius provide additional edge strength, making the insert appropriate for operations with intermittent engagement. Which series and coating technology does the grade belong to? The WPP20G grade belongs to the Tiger·tec Gold series; it is a coated carbide formulation optimised for high process reliability when machining steel. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools serves explanatory purposes only and does not imply any affiliation. The offered article is original, factory-new goods of the stated manufacturer.
TNMG160412-MP5 WPP30G Wendeplatten - Walter Tools
Benefit from a combination of high wear resistance and predictable chip control for efficient steel turning operations: the Tiger·tec Gold coating with the WPP30G grade extends edge life while the MP5 chipbreaker secures stable chip formation and process reliability. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160412-MP5 WPP30G indexable turning insert — Tiger·tec Gold, for steel machining, Walter Tools A TNMG160412-MP5 WPP30G indexable turning insert engineered for productive turning of steel, featuring the Tiger·tec Gold coating and an MP5 chipbreaker for consistent machining performance Tiger·tec Gold coating for consistent wear resistance Grade WPP30G optimised for steel machining MP5 chipbreaker for controlled chip formation 60° triangle, 1.2 mm corner radius for robust edges Longer tool life through modern coating technology The combination of the Tiger·tec Gold coating and the WPP30G grade delivers a measurable increase in tool life when machining steels. The coated carbide substrate reduces flank and crater wear under the thermal and mechanical loads typical for steel turning. For production environments this means fewer index changes and steadier cycle times — a direct improvement to overall process economy. The coated surface also supports consistent surface finish, reducing rework and boosting throughput. Reliable chip control and stable cutting geometry With the MP5 chipbreaker and the 60° triangle form, chip formation is channelled and predictable, lowering the risk of built-up edge and erratic cutting forces. The 0° negative rake angle contributes to a positive edge strength, while the 1.2 mm corner radius increases robustness at interrupted cuts. These geometric choices make the insert particularly suited to operations that demand repeatable results and minimal operator intervention, thereby supporting uninterrupted production runs and reduced scrap rates. Designed for productive steel applications and process security The insert is specified for machining steel, benefiting from the WPP30G chemistry that balances wear resistance with toughness for common steels and alloyed grades. The designation and tolerance class M indicate a manufacturing consistency that supports repeatable clamping and indexing. In practice, this indexable solution helps stabilise cycle times and provides a dependable baseline for process optimisation, making it a pragmatic choice where productivity and predictable tool performance are priorities. Contact Metav Werkzeuge for an application review and to discuss Walter Tools Tiger·tec Gold inserts; technical advice and order processing are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TNMG160412-MP5-WPP30G-WALTER Designation: TNMG160412-MP5 WPP30G Manufacturer / Brand: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: MP5 Tolerance class: M Rake: Negative 0° Numbers / Core technical data Corner radius: 1.2 mm Size: 16 Plate thickness code: 04 Special features / Versions Coating: Tiger·tec Gold Material suitability: Steel (P) Plate form: Triangle 60° Execution: G FAQ What materials is this insert intended for? The insert is designed primarily for machining steel; the WPP30G grade and Tiger·tec Gold coating are tuned to the heat and chip characteristics of steel turning. What benefit does the MP5 chipbreaker provide? The MP5 chipbreaker promotes controlled chip formation and evacuation, improving surface finish consistency and reducing the chance of entangling chips in automated turning operations. What are the key geometric specifications of the insert? This turning insert features a 60° triangular form with a 1.2 mm corner radius and a 0° negative rake, giving a robust cutting edge suited to interrupted and continuous cuts. Is the insert suitable for high-volume production? Yes. The Tiger·tec Gold coating combined with the WPP30G grade supports extended edge life and process stability, making the insert appropriate for high-volume steel turning where predictable tool life is required. How is the insert referenced in tooling documentation? The item is listed as TNMG160412-MP5 WPP30G and is compatible with toolholders that accept the TNMG1604 geometry designation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TNMG160412-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the MU5 chipbreaker and a stable triangular geometry to achieve productive, repeatable Stahl turning; order the TNMG160412‑MU5 WPP05G via Metav Werkzeuge or consult our application specialists for setup recommendations. TNMG160412-MU5 WPP05G – Triangular coated indexable insert, Tiger‑tec Gold (Walter Tools) The TNMG160412-MU5 WPP05G is a triangular, coated indexable insert optimised for medium to heavy Stahl turning, featuring a MU5 chipbreaker and a negative 0° rake for reliable material removal. Tiger‑tec Gold coated carbide Optimised for Stahl machining Triangular 60° form for stability MU5 chipbreaker for controlled chips Increase machining throughput with a wear‑resistant coating The combination of the Tiger‑tec Gold coating and a coated carbide substrate delivers enhanced wear resistance under typical turning conditions. This coating technology reduces flank and crater wear during continuous operation, which directly supports longer tool life and fewer index changes. For workshops looking to boost cycle counts without compromising repeatability, the result is a measurable improvement in productivity and a reduction in process interruptions. Stable chip control for predictable finishing The MU5 chipbreaker is designed to generate short, manageable chips when machining Stahl grades specified for this insert. Controlled chip formation reduces tool nose contact and helps maintain a consistent surface quality across the workpiece. As a consequence, setups run with less manual intervention and produce more uniform finishes, making the insert suitable for both series production and demanding single‑part operations. Geometry engineered for secure cutting performance A triangular 60° insert form paired with a corner radius 1.2 mm and 0° (negativ) rake ensures a robust cutting edge and improved seat stability in the toolholder. This geometry absorbs cutting forces more evenly, lowering the risk of edge chipping under interrupted cuts and offering steady performance across varying feed rates. The insert’s tolerance class M supports precise positioning and repeatable indexing in modern turning tools. Practical application advice and operational benefits Compatibility with ISO group P (Stahl) makes this insert a versatile choice across a wide range of common steels, from general structural grades to tougher alloyed materials. The TNMG160412‑MU5 WPP05G reduces downtime through extended wear resistance and easier chip evacuation, leading to lower tooling costs per component. For operators new to coated inserts, the predictable behaviour and simple indexation reduce learning curves during process introduction. For application support or to procure Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: TNMG160412-MU5-WPP05G-WALTER ISO designation: TNMG160412-MU5 WPP05G Series: Tiger-tec Gold Grade/Sorte: WPP05G Manufacturer: Walter Tools Facts Shape: Dreieck 60° Corner radius: 1.2 mm Thickness: 04 Relief angle: 0° (negativ) Chipbreaker: MU5 Tolerance class: M Material code: P Special features Coated carbide grade Optimised for Stahl applications Suitable for medium to heavy turning Stable edge and reliable indexation FAQ What materials is this insert designed for? This insert is designed primarily for Stahl applications; the Tiger‑tec Gold grade WPP05G is tuned for typical workpiece steels. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on the TNMG160412‑MU5 WPP05G produces controlled, short chips that improve surface quality and simplify chip handling in turning operations. Can this insert be used for interrupted cuts? Yes, the triangular 60° geometry combined with a 1.2 mm corner radius and negative rake gives the insert the robustness required for interrupted and cyclic cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a recognised provider of precision metal‑cutting solutions. Protected trademarks and product names belong to their respective owners; brand names are used for explanation only. There is no affiliation between our company and the manufacturers named. The offered item is an original, factory‑new product from the manufacturer.
TNMG160412-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a robust WPP10G grade and a compact triangular geometry for steady steel machining and predictable tool life. Order the inserts directly via Metav Werkzeuge or consult the technical team for an optimised tool selection. TNMG160412-MU5 WPP10G – Indexable turning insert for steel with Tiger‑tec Gold coating A TNMG160412-MU5 WPP10G triangle insert designed for general steel turning, offering a durable coated carbide grade and stable chip control for reliable production runs Tiger‑tec Gold coated carbide for durability Designed for steel machining (ISO group P) Triangle 60° form with 1.2 mm corner radius 0° negative rake for stable cutting action Increased uptime through a wear‑resistant grade The WPP10G grade, developed within the Tiger‑tec Gold family, combines a hard coating with a carbide substrate to resist abrasion and extend tool life when machining steel. This results in fewer tool changes and more predictable cycle times, which supports higher machine utilisation. The deposit‑type coating improves thermal resistance during continuous turning, reducing flank wear and protecting the cutting edge under typical steel cutting temperatures. Stable cutting geometry for consistent surface quality The triangular 60° insert geometry with a 1.2 mm corner radius provides a balance between edge strength and finishing capability. The 0° negative rake design favours robust cutting in interrupted or heavy cuts by reducing the risk of edge chipping; it also stabilises the cutting forces for improved vibration resistance. Together with the MU5 chipbreaker, this combination enhances chip control in standard steel grades, which simplifies swarf handling and helps maintain consistent surface finish. Easy integration into established tool programmes With the standard designation TNMG160412-MU5 WPP10G, the insert fits common toolholders and simplifies inventory management across turning operations. The M tolerance class and defined plate dimensions support reproducible indexing and repeatable seating in the pocket. As a coated carbide insert from Walter Tools, it suits serial production environments where process security and predictable tool life are priorities; technical advisors can assist with cutting data to match batch sizes and machining strategies. For machining centres requiring consistent steel performance, contact Metav Werkzeuge for tailored advice and to secure TNMG160412-MU5 WPP10G inserts from Walter Tools; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMG160412-MU5-WPP10G-WALTER Designation: TNMG160412-MU5 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 04 Corner radius: 1.2 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MU5 Plate form: Triangle 60° Material application: Steel (ISO group P) FAQ What materials is this insert intended for? The TNMG160412-MU5 WPP10G is specified for steel machining (ISO group P) and its grade and chipbreaker are tuned to typical steel cutting behaviour. How does the MU5 chipbreaker affect chip formation? The MU5 chipbreaker on this triangular insert promotes controlled chip segmentation for steel, improving evacuation and reducing the risk of long, stringy swarf. Is the insert suitable for heavy interrupted cuts? Yes; the 0° negative rake and 1.2 mm corner radius provide edge robustness suited to heavier and interrupted cutting conditions in turning operations. What is the benefit of the Tiger‑tec Gold series? The Tiger‑tec Gold technology offers enhanced wear resistance and thermal stability, supporting longer tool life and stable performance in serial production. Which tolerance class applies and why does it matter? Tolerance class M ensures consistent fit and repeatable seating in standard toolholders, which is important for maintaining part accuracy and predictable tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original factory‑new goods from the manufacturer.
TNMG160412-MU5 WPP20G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the WPP20G grade and the robust negative geometry to achieve consistent, long-lasting performance in steel turning — order directly via Metav Werkzeuge or consult our specialists for application support. TNMG160412-MU5 WPP20G indexable turning insert — Tiger·tec Gold grade, for steel A TNMG160412-MU5 WPP20G indexable turning insert designed for reliable steel machining with a MU5 chipbreaker and negative 0° relief. Tiger·tec Gold coating for long tool life WPP20G grade optimised for steel machining Triangle 60° insert with 1.2 mm nose radius Negative 0° relief for secure clamping High-performance grade for productive steel machining The WPP20G grade within the Tiger·tec Gold family is a coated carbide solution tailored to the thermal and chip-formation characteristics of steel. As a coated hard-metal grade, it provides wear resistance and consistent edge stability under the cyclic loads typical of turning operations. This results in predictable tool life and reduced downtime for regrinding or index changes. The grade classification highlights a balance between universality and abrasion resistance, making it suitable for a wide range of unalloyed and alloyed steels in accordance with ISO 513 group P. Geometry and chip control for repeatable surface quality The triangular 60° form combined with a 1.2 mm nose radius and negative 0° relief creates a stable cutting edge that supports secure clamping and resistance to mechanical shock. The MU5 chipbreaker is configured to produce regular, manageable chips when cutting steel, improving surface finish and easing swarf removal. The moderate nose radius contributes to component strength and surface integrity while allowing for controlled finishing passes. These geometric choices help to reduce vibration and deliver reproducible dimensional accuracy across batch production. Process advantages and selection guidance for engineers Selecting this indexable insert delivers tangible productivity benefits: fewer tool changes, improved process stability and consistent part quality. The coated grade minimises flank and crater wear during continuous production, supporting economical turning cycles. When planning toolpaths, pair the insert with appropriate feed rates and rigid tooling to exploit the Tiger·tec Gold toughness and wear resistance. For mixed-production environments focused on steel components, the combination of chipbreaker, geometry and coating reduces setup complexity and increases overall throughput. For precision steel turning with the Tiger·tec Gold WPP20G grade, contact Metav Werkzeuge for tailored advice and reliable supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: TNMG160412-MU5-WPP20G-WALTER Product: TNMG160412-MU5 WPP20G Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: MU5 Facts Insert size: 16 mm Thickness: 4 mm Corner radius: 1.2 mm Insert shape: Triangle 60° Relief angle: 0° (negative) Tolerance class: M Special features Coated carbide grade Optimised for steel (ISO 513 group P) Stable chip formation Robust edge for interrupted cuts Suitable for productive turning operations FAQ What materials is this insert suited for? This insert is designed for steel machining; the WPP20G grade and Tiger·tec Gold technology are optimised for ISO 513 group P materials. What does the MU5 chipbreaker provide? The MU5 chipbreaker produces controlled chips in steel turning, improving surface finish and easing swarf evacuation when used with appropriate feeds and rigidity. How does the negative 0° relief affect performance? The negative 0° relief enhances clamping security and edge strength, making the insert more tolerant to interrupted cuts and heavy machining forces. What benefits does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating increases wear resistance and edge stability, extending tool life and supporting consistent production results. Which insert geometry should be used for fine finishing? A smaller nose radius and appropriate feed adjustments yield finer finishes; the 1.2 mm radius on this insert balances strength and surface quality for many turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools gehört zum Markenauftritt der Walter AG und ist Teil des Sandvik-Konzerns.
TNMG160412-MU5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a MU5 chipbreaker and a 1.2 mm corner radius for stable, high‑quality turning of stainless steels and heat‑resistant alloys; order the insert via Metav Werkzeuge or consult our team for tailored recommendations. TNMG160412-MU5 WSM20S indexable turning insert for stainless steels and superalloys — Walter Tools A TNMG160412-MU5 WSM20S indexable turning insert designed to deliver consistent chip control and edge stability when machining rostfreie Stähle and heat‑resistant superalloys. Tiger‑tec Silver coated carbide grade WSM20S Triangle 60° insert with 1.2 mm corner radius MU5 chipbreaker for controlled chip formation Negative 0° relief for robust cutting action Optimised grade and coating for difficult materials The Walter WSM20S grade, part of the Tiger‑tec Silver family, combines a wear‑resistant coating with a coated‑carbide substrate to extend tool life when machining stainless steels and nickel‑based alloys. The selected grade supports stable cutting edges and reduced built‑up edge, which in turn improves process reliability. For production environments processing tough alloys, this results in fewer tool changes and more predictable spindle time, enhancing throughput and lowering cycle‑time variability. Geometry and chip control that stabilise the cut The triangular 60° geometry with a 1.2 mm corner radius and the MU5 chipbreaker create a balanced profile for finishing and medium turning operations. The negative 0° relief provides a robust cutting face that resists edge chipping under interrupted cuts or heavy radial engagement. Explained simply: the corner radius reduces notch sensitivity and the chipbreaker shapes chips to evacuate reliably, so operators observe improved surface finish and reduced risk of machine stoppages due to clogged chip evacuation. Production advantages and application fit Designed for industrial turning, the insert supports consistent results across batches of rostfreie Stähle and heat‑resistant superalloys. The combination of grade, chipbreaker and geometry yields a cost‑effective solution by extending edge life and maintaining surface integrity, which lowers rework rates. In practise, this means fewer tool changeovers per shift and steadier part quality for components that demand tight surface specifications or repeatable dimensional control. Discuss application requirements with Metav Werkzeuge to select the right Walter Tools Tiger‑tec Silver inserts for specific stainless steel or superalloy tasks; contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised advice and availability. Technical data Article number: TNMG160412-MU5-WSM20S-WALTER Designation: TNMG160412-MU5 Product type: indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Core data Size: 16 mm Corner radius: 1.2 mm Thickness: 04 Relief angle: 0° (negative) Shape: Triangle 60° Tolerance class: M Chipbreaker: MU5 Execution: G Special features Coated carbide technology (Tiger‑tec Silver) Suitable for stainless steels (M) Suitable for superalloys and titanium (S) Designed for stable cutting edge and controlled chip formation Optimised for difficult‑to‑machine materials FAQ What materials is this insert suitable for? The TNMG160412‑MU5 WSM20S insert from Walter Tools is specified for rostfreie Stähle and heat‑resistant superalloys (ISO groups M and S), providing good edge stability when machining these demanding materials. What role does the MU5 chipbreaker play? The MU5 chipbreaker on the Walter insert shapes and breaks chips reliably to improve evacuation and surface finish, reducing the risk of chip entanglement during continuous turning operations. Why choose a negative 0° relief angle? A negative 0° relief provides a robust cutting edge for the insert, making the geometry more resistant to edge chipping under heavy cuts or interrupted machining, which supports process stability in production. How does the 1.2 mm corner radius affect production? The 1.2 mm radius increases notch resistance and distributes cutting forces, which helps to improve surface quality and extend tool life in finishing to medium turning. Is this insert part of a recognised coating family? Yes, the insert belongs to the Tiger‑tec Silver family; the coated‑carbide construction is intended to enhance wear resistance and thermal stability during machining of difficult alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
TNMG160412-MW5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating, the wear‑resistant WKK10S grade and the MW5 chipbreaker for consistent productivity in cast‑iron turning; order the insert directly via Metav Werkzeuge or consult our advisors for application support. TNMG160412-MW5 WKK10S indexable turning insert – Tiger‑tec Silver (Walter Tools) The TNMG160412-MW5 WKK10S is a triangular 60° indexable insert with MW5 chipbreaker, designed for productive turning of cast iron components in demanding industrial machining. Tiger‑tec Silver coated grade WKK10S Optimised for cast iron (ISO K) Triangular 60° 16 mm insert, 1.2 mm nose radius MW5 chipbreaker for secure chip control Consistent cutting performance for abrasive cast iron The combination of the Tiger‑tec Silver coating and the WKK10S cutting grade is engineered to resist the abrasive wear typical of cast‑iron machining. The coating reduces flank wear and helps maintain a stable cutting edge over longer tool life, which translates directly into fewer tool changes and improved process uptime. Thanks to the MW5 chipbreaker, short brittle chips are controlled reliably, reducing the risk of built‑up edge and improving surface quality on ferritic and grey cast irons. This technical setup is intended to deliver measurable gains in cycle time and repeatability for production environments. Enhanced process stability and predictable tool life A 0° negative rake and a robust cutting grade lead to high mechanical strength of the cutting edge; this makes the insert particularly suited to interrupted cuts and heavy roughing operations in cast iron. The triangular 60° geometry with a 1.2 mm nose radius gives a balance between strength and profile accuracy, allowing stable feeds and dependable dimensional control. These attributes support a rational investment case: improved component throughput and predictable regrinding or replacement intervals, contributing to lower overall machining cost per part. Clear application guidance for integration into machining processes This indexable insert is classified for ISO group K (cast iron) and is optimised for the abrasive, often short‑chip behaviour of these materials. The 16 mm insert size and the specified chipbreaker suit common toolholders and clamping systems; inserts can be indexed to present fresh cutting edges quickly, reducing downtime. The negative rake angle benefits operations where rigidity and edge robustness are required. For users less familiar with insert technology, the technical characteristics support straightforward selection: a coated tungsten‑carbide grade for cast iron, a dedicated chipbreaker and a robust geometry. Practical handling and manufacturing benefits Using these inserts in a production setting simplifies inventory management through a well‑defined grade and series: Tiger‑tec Silver and WKK10S provide wide material coverage within cast iron families while maintaining consistent wear characteristics. The insert's thickness code and form ensure compatibility with standard toolholder systems; quick indexing reduces operator time per tool change. The net effect is a contribution to leaner machining processes, fewer production interruptions and reliable surface finish—factors that matter in series production and repair workflows. Contact Metav Werkzeuge today to request cutting‑data recommendations for Walter Tools inserts or to discuss suitable toolholders and process parameters; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TNMG160412-MW5-WKK10S-WALTER Label: Drehwendeschneidplatte TNMG160412-MW5 WKK10S Walter Tools Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S ISO designation: TNMG160412-MW5 WKK10S Dimensions & core data Insert size: 16 Thickness: 04 Nose radius: 1.2 mm Insert shape: Triangular 60° Rake angle: 0° (negative) Chipbreaker: MW5 Tolerance class: M Materials & features Suitable for: Cast iron (ISO K) Coating / technology: Tiger‑tec Silver Sortenbeschreibung: Coated carbide grade optimised for abrasive wear Application focus: Roughing and general turning of cast‑iron components FAQ What material range is this insert intended for? The TNMG160412-MW5 WKK10S is designed primarily for cast iron (ISO K), where the WKK10S grade and Tiger‑tec Silver coating perform best under abrasive conditions. How does the MW5 chipbreaker influence machining? The MW5 chipbreaker provides controlled short‑chip formation on grey and nodular cast irons, improving chip evacuation and reducing risk of chip interference during turning. Is the insert suitable for interrupted cuts or heavy roughing? Yes, the negative 0° rake and robust triangular geometry give the insert mechanical strength for interrupted cuts and heavy stock removal in cast‑iron operations. Which tooling dimensions must be matched to use this insert? Toolholders compatible with TNMG‑style triangular 60° inserts and the specified 16 size are required; the thickness code and seating must match the holder to ensure stable clamping and repeatable performance. Does the Tiger‑tec Silver coating benefit finish quality? The coating helps maintain edge integrity and reduces flank wear, which supports consistent surface finish over the life of the insert when machining cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
TNMG160412-MW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold wear protection and the MW5 chipbreaker for reliable steel turning; the combination of stable chip formation and precise 60° triangle geometry supports consistent production results. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNMG160412-MW5 WPP10G indexable turning insert — Tiger·tec Gold, Walter Tools A TNMG160412-MW5 WPP10G indexable turning insert designed for steel machining, offering a robust coated-carbide grade and an MW5 chipbreaker for controlled chip formation in general turning operations Tiger·tec Gold coating for improved wear resistance MW5 chipbreaker optimised for steel machining Triangle 60° geometry for versatile turning Corner radius 1.2 mm for uniform surface finish Longer tool life through wear‑protective coating The combination of the Tiger·tec Gold coating and the WPP10G grade provides a wear-resistant cutting edge that reduces flank and crater wear under typical steel cutting conditions. As a coated carbide solution, this insert is tailored to the thermal and mechanical loads encountered when machining P‑group materials (steel). The protective coating delays abrasion and edge breakdown, which translates into longer tool life and fewer indexings per production run, improving uptime and reducing tool-change frequency. Predictable chip control and process stability With the integrated MW5 chipbreaker and a negative 0° relief angle, the insert is configured to produce consistent chip forms during medium to heavy cuts in steel. The chipbreaker geometry supports controlled evacuation and lower cutting forces, which benefits both roughing and semi-finishing operations. Stable chip formation reduces the likelihood of built-up edge and contributes to repeatable cycle times, supporting predictable throughput in batch machining. Geometry and edge specification for consistent surface quality The triangular 60° insert form and a corner radius of 1.2 mm deliver a balance between strength and surface finish. The geometry enables flexible toolpath strategies while offering a robust nose for interrupted cuts. The tolerance class M ensures dimensional consistency across indexable inserts, permitting reliable seating in standard toolholders and reproducible part accuracy. These characteristics make the insert suitable for users who prioritise steady part quality and process repeatability. Application and compatibility in production settings Classified for machining steel (P), the insert is a practical choice for a wide range of unalloyed and alloyed steels. The design supports common turning applications on CNC lathes where a coated carbide grade with a dedicated chipbreaker is preferred. Compatibility with standard TNMG toolholders simplifies integration into existing tooling kits, while the Tiger·tec Gold technology aims to reduce the frequency of regrinding and handling, thereby streamlining workflow and lowering handling costs. For steel-focused turning tasks that demand reliable edge life, specify the Walter Tools TNMG160412-MW5 WPP10G via Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 to align insert choice with the application and material. Technical Data Article number: TNMG160412-MW5-WPP10G-WALTER Manufacturer: Walter Tools Product type: indexable turning insert Facts Insert shape: Triangle 60° Inscribed circle / size: 16 Corner radius: 1.2 mm Thickness: 04 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: MW5 Coating: Tiger·tec Gold (coated carbide) Material application: Steel (P) Execution: G FAQ What materials is this insert suitable for? The TNMG160412-MW5 WPP10G is specified for machining steel (P), with the WPP10G grade and Tiger·tec Gold coating optimised for typical steel cutting conditions. How does the MW5 chipbreaker affect machining? The MW5 chipbreaker on this Walter Tools insert supports controlled chip formation and evacuation when turning steel, helping to reduce cutting forces and improve process stability. Is the negative 0° relief angle suitable for heavy cuts? Yes, the negative 0° relief angle increases edge strength and is appropriate for more demanding turning operations where robustness is required. What surface finish can be expected with a 1.2 mm corner radius? A corner radius of 1.2 mm provides a compromise between tool strength and surface quality, delivering consistent finishes in general turning while maintaining tool resilience for interrupted cuts. Will this insert fit standard TNMG toolholders? The TNMG160412-MW5 form follows standard TNMG geometry and is compatible with common TNMG toolholders; correct seating and clamping are essential for reliable performance. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and trademarks are the property of their respective owners. Registered trademarks are mentioned for explanation and identification purposes only. There is no affiliation between our company and the trademark owners. The offered item is original factory-new goods of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com