TNMG160404-FP5 WKP01G Wendeplatten - Walter Tools
Take advantage of durable cutting performance and precise geometry: the combination of Tiger·tec Gold coating and the WKP01G grade provides long tool life and consistent chip control when machining steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for grade selection and cutter setup. TNMG160404-FP5 WKP01G turning insert — triangular 60°, Tiger·tec Gold, for steel and cast iron (Walter Tools) The TNMG160404-FP5 WKP01G is a triangular turning insert designed for external turning applications on steel and cast iron, offering robust chip control and extended tool life thanks to a specialised coating and dedicated chipbreaker geometry. Tiger·tec Gold coating for extended tool life Designed for steel and cast iron machining Triangular 60° insert with 0° negative rake Consistent productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WKP01G carbide grade delivers a reliable balance between wear resistance and toughness. This results in longer tool life and fewer indexings, which increases uptime on production lathes. The coated hardmetal technology is engineered to withstand the thermal and abrasive conditions typical for machining P (steel) and K (cast iron) groups under ISO 513, so operators can expect stable performance across medium to high cutting speeds. In practical terms, this means fewer tool changes and a lower cost per component for repetitive turning operations. Precise chip control and secure cutting geometry for safer machining The insert features the FP5 chipbreaker, a 0° negative rake, and a 0.4 mm corner radius, which together provide controlled chip formation and reliable surface finish. The FP5 geometry is tailored to break and evacuate chips efficiently when working with both unalloyed and alloyed steels as well as various cast-iron grades, reducing the risk of built-up edge and unexpected interruptions. The triangular 60° form permits multiple indexings per insert, improving economy while the tolerance class M ensures reproducible fitment in standard toolholders, supporting consistent results across tool assemblies. Simple integration, reliable economics and predictable results The designation indicates a compact insert profile—16 mm inscribed circle and a nominal thickness equivalent to the 04 series—making it compatible with common turning toolholders for external operations. The TNMG geometry supports straightforward mounting and positive seating, while the WKP01G sort offers broad material coverage, simplifying tooling decisions for mixed production runs. The result is an insert that combines process security with cost-conscious operation: fewer interruptions, stable surface quality and clear indexing advantages translate into measurable production benefits over time. For availability and advice on integrating Walter Tools turning inserts into specific setups, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and rapid delivery Technical data Article number: TNMG160404-FP5-WKP01G-WALTER Label: Drehwendeschneidplatte TNMG160404-FP5 WKP01G Walter Tools Product type: Drehwendeschneidplatte (turning insert) Series: Tiger-tec Gold Grade: WKP01G Manufacturer: Walter Tools Chipbreaker: FP5 Numbers / Core technical data Inscribed circle: 16 mm Thickness: 4 mm Corner radius: 0.4 mm Relief angle: 0° (negative) Insert shape: triangle 60° Tolerance class: M Designs / Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: Steel (P), Cast iron (K) Chip control: FP5 chipbreaker Robust grade for broad workpiece coverage Multiple indexing via triangular form Series emphasis on stable cutting edge and productivity FAQ What materials is this insert suitable for? The TNMG160404-FP5 WKP01G is optimised for steel (P) and cast iron (K) applications, providing reliable wear resistance and chip control for these ISO material groups. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WKP01G grade reduces abrasive wear and increases thermal resistance, which extends the insert life and helps maintain consistent surface finish during longer production runs. What does the FP5 chipbreaker do? The FP5 chipbreaker is designed to produce short, controlled chips in both steel and cast iron, improving evacuation and reducing the risk of chip entanglement in turning operations. Is this insert compatible with common TNMG toolholders? Yes, the TNMG160404-FP5 geometry and tolerance class M ensure compatibility with standard TNMG toolholders for external turning; correct seating provides secure clamping and repeatable results. What surface quality can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius balances tool strength and finish quality, offering a good compromise for general turning where moderate edge strength and decent surface roughness are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, proven Tiger·tec Gold coating and controlled chip formation for reliable steel turning. Benefit from consistent tool life and repeatable part quality with the FP5 chipbreaker and 0.4 mm nose radius. Order the TNMG160404-FP5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404-FP5 WPP10G triangle indexable turning insert, FP5 chipbreaker, Walter Tools The TNMG160404-FP5 WPP10G is a triangular indexable turning insert designed for robust steel machining, combining a Tiger·tec Gold coated carbide grade with an FP5 chipbreaker for predictable chip control Tiger·tec Gold coated carbide grade WPP10G FP5 chipbreaker for controlled chip formation Triangle 60° insert with 0.4 mm nose radius Designed for steel machining (ISO P) Consistent chip control that raises productivity The FP5 chipbreaker paired with the Tiger·tec Gold coating delivers reliable chip control during medium to heavy interrupted cuts, which reduces downtime and helps maintain a steady production rate. The coated carbide grade WPP10G is engineered for the thermal and mechanical conditions typical when machining steel, so wear is delayed and tool changes become less frequent. This results in a direct gain in machine utilisation and predictable cycle times for serial production. Predictable geometry for accurate contouring and surface finish A triangle 60° form with a 0.4 mm nose radius provides a balance between profile strength and fine edge definition, enabling reproducible part geometry and good surface quality on turned components. The negative 0° free angle contributes to a robust cutting edge that tolerates variable cutting conditions, while the insert shape offers three usable cutting edges, increasing indexable life and lowering per-part tooling cost. These features support consistent tolerances in repeat manufacturing. Designed for straightforward integration into turning processes The TNMG designation follows familiar ISO indexing, which simplifies tool selection and machine set-up. With the WPP10G grade focused on steel (ISO P), adoption into existing toolholders and machining programmes is seamless. The combination of coated carbide, FP5 chipbreaker and stable edge geometry supports longer intervals between inspections and makes the insert suitable for both batch production and continuous machining tasks. This alignment of durability and process reliability helps reduce total operating costs. Choose the Walter Tools Tiger·tec Gold TNMG160404-FP5 WPP10G for dependable steel turning and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG160404-FP5-WPP10G-WALTER Designation: TNMG160404-FP5 WPP10G Product type: Indexable turning insert (triangle 60°) Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: FP5 Nose radius: 0.4 mm Inscribed circle: 16 mm Free angle: 0° (negative) Thickness: 04 Tolerance class: M Coating: Tiger·tec Gold (coated carbide) Material base: Coated hardmetal Geometry: Triangle 60° Application group: Steel (ISO P) Cutting edge: Negative geometry Suitable operations: Turning, finishing and medium-depth cuts FAQ What workpieces is this insert best suited for? The TNMG160404-FP5 WPP10G is optimised for machining steel (ISO P) and performs well in a range of turning operations where controlled chip formation and durable cutting edges are required. How does the FP5 chipbreaker improve machining? The FP5 chipbreaker on the TNMG160404-FP5 promotes predictable chip flow and reduced build-up, supporting continuous operation and consistent surface quality when turning steel. Can the insert be indexed for additional cutting edges? Yes, the triangular 60° form provides multiple indexable edges, allowing the TNMG160404-FP5 WPP10G to be rotated to fresh edges to extend usable tool life. Is the coating suitable for interrupted cuts? The Tiger·tec Gold coating on this grade enhances wear resistance and helps withstand the thermal stresses common in interrupted turning of steel components. What does the designation TNMG160404 indicate? The ISO-style designation describes the insert geometry and key dimensions; the TNMG160404-FP5 WPP10G specifies shape, size, nose radius and the FP5 chipbreaker as used by Walter Tools. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and Walter Tools. The offered article is an original, factory-new product of the manufacturer.
TNMG160404-FP5 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of high cutting performance, predictable chip control and broad steel applicability for reliable turning processes; order via Metav Werkzeuge or consult the technical team for application-specific recommendations. TNMG160404-FP5 WPP20G turning insert — Tiger·tec Gold grade for steel by Walter Tools TNMG160404-FP5 WPP20G is a negative-rake triangular turning insert designed for robust steel machining with a precision chipformer. Tiger·tec Gold coating Grade WPP20G for steel FP5 chipbreaker for reliable chips Triangle 60° geometry Increase cutting performance and process stability The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a clear advantage in cycle-time optimisation and edge security when machining steels. The coated carbide composition is tuned to manage the typical heat and chip formation of steel turning operations, so the tool sustains a stable cutting edge over longer runs. This leads to more consistent part tolerances and fewer tool changes, which in turn reduces machine downtime and improves overall productivity. Consistent chip control for safer, faster production The FP5 chipbreaker geometry is engineered to produce predictable chip forms during continuous turning, reducing the risk of entanglement and improving swarf evacuation. With a triangle 60° insert form and a 0.4 mm corner radius, the insert enables controlled engagement and repeatable performance across a range of depths of cut. Clear chip control makes process setups simpler and supports higher feed rates with confidence, helping maintain production throughput while preserving surface integrity. Wide applicability and dependable tool life Selected for machining unalloyed and alloyed steel, this insert provides a versatile solution across many turning tasks. The neutral 0° (negative) rake angle and the plate thickness designation ensure mechanical strength for interrupted cuts and tougher sections. As part of Walter Tools’ Tiger·tec Gold family, the grade focuses on balance between wear resistance and toughness, resulting in predictable tool life and reduced microchipping. The robust design supports repeatable component quality and easier process standardisation on the shop floor. Contact Metav Werkzeuge for availability and tailored application advice on Walter Tools Tiger·tec Gold WPP20G turning inserts; technical consultation is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TNMG160404-FP5-WPP20G-WALTER Designation: TNMG160404-FP5 WPP20G Label: Drehwendeschneidplatte TNMG160404-FP5 WPP20G Walter Tools Manufacturer: Walter Tools Facts Inscribed circle / size: 16 mm Corner radius: 0.4 mm Plate thickness designation: 04 Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP5 Plate form: Triangle 60° Execution: G Intended material group: Steel (P) Suitable for common steel turning applications FAQ What materials is this insert intended for? The TNMG160404-FP5 WPP20G insert by Walter Tools is optimised for machining steel (material group P), including unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit the cutting process? The Tiger·tec Gold coating improves wear resistance and thermal stability during turning, which extends edge life and supports stable cutting conditions when using the WPP20G grade. What chip form can be expected with the FP5 chipbreaker? The FP5 chipbreaker delivers controlled, short-to-medium chips under typical turning parameters, aiding safe evacuation and consistent surface finish. Is the insert suitable for interrupted cuts? Yes, the negative 0° rake and robust plate design provide mechanical strength that is favourable for interrupted cuts and heavier engagement. How does the 0.4 mm corner radius influence component finish? A 0.4 mm corner radius balances edge strength with surface quality, offering improved tool life while producing a stable surface finish for many turning operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names remain the property of their respective owners. Mention of brand names such as Walter Tools serves explanatory purposes only; there is no affiliation implied. The offered item is an original, brand-new product from the manufacturer.
TNMG160404-FW5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, precise FW5 chip control and a 0.4 mm corner radius to boost throughput and extend tool life; order the insert directly via Metav Werkzeuge or contact our consultants for application support. TNMG160404-FW5 WPP10G triangular indexable turning insert — Walter Tools, Tiger·tec Gold, for steel TNMG160404-FW5 WPP10G is a triangular indexable turning insert designed for efficient steel machining, offering robust chip control and consistent edge life for production turning. Tiger·tec Gold coating for long life FW5 chipbreaker for controlled chips Triangular 60° geometry for flexible indexing 0° negative rake for stable heavy cuts Maximise machining productivity on steel The coated cemented carbide grade WPP10G in the Tiger·tec Gold series delivers a balance of wear resistance and toughness tailored to steel applications (material group P). The combination of a hard, wear-resistant coating and a robust substrate reduces flank wear and maintains cutting-edge stability, which leads to fewer insert changes and increased machine uptime. The insert's geometry supports steady material removal rates while keeping operating costs predictable. Consistent surface quality and reliable chip control The FW5 chipbreaker and the triangular 60° geometry ensure controlled chip formation and evacuation during medium to heavy turning. The 0° (negative) relief angle increases edge security under interrupted cuts and heavier feeds, lowering the risk of edge chipping. A 0.4 mm corner radius contributes to a reliable cutting edge for improved surface finish without sacrificing strength. These attributes make the insert suitable for series production where repeatable part quality matters. Practical compatibility and process guidance The insert is supplied in the TNMG format, a common indexable insert family that allows rapid indexing and straightforward seat engagement in compatible toolholders. The size designation (16) and thickness code (04) indicate the insert dimensions for holder selection; the tolerance class M supports standard interchangeability. For shops integrating this grade, pairing the insert with stable clamping and appropriate cutting parameters for steel will yield the best balance between tool life and cycle time. If assistance is required in choosing cutting data or matching a holder, Metav Werkzeuge's technical advisors are available to help. Contact Metav Werkzeuge for tailored recommendations on cutting data, holder compatibility and to secure genuine Walter Tools inserts suited to specific steel applications Technical Data SKU: TNMG160404-FW5-WPP10G-WALTER Name: TNMG160404-FW5 WPP10G (indexable turning insert) Brand: Walter Tools Facts Insert shape: triangular 60° Corner radius: 0.4 mm Insert size: 16 Thickness code: 04 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: FW5 Material application: steel (P) Substrate: coated cemented carbide FAQ What materials is this insert designed to machine? The TNMG160404-FW5 WPP10G from Walter Tools is formulated for machining steel (ISO group P), combining a coated cemented carbide substrate and Tiger·tec Gold technology for typical steel cutting conditions. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker promotes controlled chip formation and evacuation, improving process reliability and contributing to consistent surface finish when using the Walter Tools TNMG160404-FW5 WPP10G insert. Is the insert suitable for interrupted cuts or heavy roughing? Yes, the 0° negative relief angle and the robust Tiger·tec Gold grade help protect the cutting edge during interrupted cuts and heavier passes, offering stable tool life under demanding conditions. What should be considered when selecting a toolholder for this insert? Select a holder compatible with TNMG inserts that supports the 60° triangular seating and provides secure clamping; the insert's size and thickness code ensure correct fitment and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original factory-new goods of the manufacturer.
TNMG160404-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating, the FW5 chipbreaker and the triangular 60° form delivers a robust balance of edge stability, dependable chip control and economical tool life for Stahl turning operations; order directly via Metav Werkzeuge or consult our specialists for process integration. TNMG160404-FW5 WPP20G – Indexable turning insert for Stahl machining by Walter Tools, Tiger·tec Gold, 0° negative rake The TNMG160404-FW5 WPP20G is a triangular indexable turning insert engineered for general Stahl machining, offering a coated carbide grade from the Tiger·tec Gold series for stable cutting performance. Tiger·tec Gold coating for reliable edge stability FW5 chipbreaker for controlled chip formation Triangle 60° form for three cutting edges Suitable for Stahl machining (ISO P) High-performance coating and predictable edge life The Tiger·tec Gold coating together with the WPP20G substrate provides a combination of wear resistance and thermal stability that suits continuous and interrupted turning of Stahl. The coated carbide grade is designed to tolerate the typical heat and chip formation of steel cutting, which translates into consistent tool life and less frequent index changes. For production environments seeking steady cycle times, this combination reduces unexpected tool failures and supports process reliability. Controlled chip formation and improved surface finish The FW5 chipbreaker ensures predictable chip control across a range of feeds and depths of cut, reducing the risk of snarling or long, unbroken chips in turning. Better-managed chips lead to safer machining and more consistent contact between tool and workpiece, which improves the achievable surface quality. Where finish and dimensional stability matter, the insert’s geometry and chipbreaker work together to maintain cutting-edge micro-geometry throughout the life of the insert. Productivity through shape, edge radius and repeatability The triangular 60° geometry provides three usable cutting edges per insert, lowering part-per-edge costs and simplifying inventory handling. The specified corner radius of 0.4 mm increases edge strength for moderate depths of cut while supporting repeatable part production. The insert’s 0° negative rake gives a robust edge for heavier cuts and helps maintain process security in tougher turning applications, contributing to measurable uptime improvements on the shop floor. Application range and process guidance Classified for ISO group P, the insert is suitable for unalloyed and alloyed Stahl where a balance of wear resistance and toughness is required. The Tiger·tec Gold series aims at a wide material coverage with stable chip formation and good cutting-edge durability. For best results, match cutting data to machine rigidity and workpiece clamping; consult tooling charts for feed and speed ranges aligned to the chosen carbide grade and chipbreaker to exploit the insert’s full potential. For tailored recommendations on integrating Walter Tools Tiger·tec Gold turning inserts into production, contact Metav Werkzeuge for technical advice and order handling Technical Data Article number: TNMG160404-FW5-WPP20G-WALTER Product designation: TNMG160404-FW5 WPP20G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Corner radius: 0.4 mm Insert size: 16 Thickness: 04 Plate angle: 60° Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FW5 Geometry: Dreieck 60° Material suitability: Stahl (ISO P) Series designation: Tiger-tec Gold FAQ What materials is this insert intended for? The TNMG160404-FW5 WPP20G insert from Walter Tools is specified for ISO P materials and is primarily intended for machining Stahl, including unalloyed and alloyed steels. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker on the Walter Tools insert promotes controlled chip formation, improving chip evacuation and contributing to a more consistent surface finish during turning. How many cutting edges are available per insert? Due to the triangular 60° form, the TNMG160404-FW5 WPP20G offers three cutting edges, supporting economical edge use and swift index changes. Is the insert suitable for interrupted cuts? The combination of Tiger·tec Gold coating and a 0° negative rake gives the insert robustness for interrupted cuts on Stahl, providing enhanced edge strength and process security. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; this radius balances edge strength with achievable surface finish, making it suitable for general turning operations in Stahl. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is original and brand-new from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TNMG160404-FW5 WSM20S FW5 Wendeplatten - Walter Tools
Robust, thermally stable performance and reliable chip control make this insert a strong choice for machining stainless steels and heat‑resistant alloys; combine the Tiger‑tec Silver coating and WSM20S grade for extended tool life and consistent results. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TNMG160404-FW5 WSM20S – Indexable turning insert, Tiger‑tec Silver, FW5 chipbreaker (Walter Tools) The TNMG160404-FW5 WSM20S is a triangular indexable turning insert engineered for demanding turning of stainless steels and superalloys, offering a stable cutting edge and controlled chip formation for production environments. *Tiger‑tec Silver coating for high thermal stability *WSM20S grade for stainless and superalloys *Triangle 60° shape, 16 mm inscribed circle *FW5 chipbreaker with 0.4 mm corner radius Reliable chip control for demanding materials The combination of the FW5 chipbreaker and the WSM20S grade ensures consistent chip formation when machining materials prone to built‑up edge and poor thermal conductivity. The insert’s chipformer geometry reduces interruptions in the cutting process and helps maintain a steady material flow, which lowers the risk of workpiece damage and reduces rework. The underlying coated carbide substrate stabilises the cutting edge under fluctuating heat loads, translating into fewer indexings and more uninterrupted production time. High process security and extended tool life The Tiger‑tec Silver coating boosts thermal resistance and wear protection, supporting a broad range of cutting conditions typical in stainless and heat‑resistant alloy machining. This combination provides improved flank and crater wear behaviour, which contributes to reproducible surface quality and predictable tool change intervals. For operations that prioritise throughput and repeatability, the grade and coating deliver a measurable advantage in maintaining cutting performance across batches. Geometry designed for versatile turning operations Geometry features such as the triangle 60° form, 16 mm inscribed circle and 0.4 mm corner radius enable balancing strength and accessibility in both semi‑finishing and roughing passes. The insert’s negative 0° relief angle offers a robust cutting edge for heavier cut engagements, while the tolerance class M supports consistent seating in compatible toolholders. These dimensional and tolerance attributes make the insert suitable for standard turning tool systems where rigidity and process reliability are essential. For application matching, availability or to specify Walter Tools Tiger‑tec Silver inserts for a production line, contact Metav Werkzeuge for precise advice and fast handling at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TNMG160404-FW5-WSM20S-WALTER Name: TNMG160404-FW5 WSM20S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Key dimensions & geometry Shape: Triangle 60° Inscribed circle: 16 mm Corner radius: 0.4 mm Thickness code: 04 Relief angle: 0° (negative) Tolerance class: M Execution: G Material compatibility & features Coating / grade: WSM20S (coated carbide) Chipbreaker: FW5 Suitable for: Stainless steels (ISO 513 M) Suitable for: Superalloys / titanium (ISO 513 S) Application focus: Difficult‑to‑cut materials and, depending on geometry, stainless steel FAQ What materials is this insert suited to machine? The TNMG160404-FW5 WSM20S is designed for stainless steels (ISO 513 M) and heat‑resistant superalloys / titanium (ISO 513 S), making it suitable where thermal resistance and edge stability are required. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver technology on the WSM20S grade improves thermal stability and wear resistance, extending tool life and supporting consistent surface finish under demanding cutting conditions. What are the key geometric features and their benefits? The triangular 60° form with a 16 mm inscribed circle and 0.4 mm corner radius delivers a robust cutting edge and good access to workpiece profiles; the negative 0° relief supports heavier engagements and increased edge strength. Which chip control can be expected with this chipbreaker? The FW5 chipbreaker is tuned to promote stable chip formation in sticky or ductile materials, reducing the incidence of built‑up edge and improving process reliability during continuous turning cycles. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanation. There is no affiliation between our company and the named brands; the offered item is an original, factory‑new product of the manufacturer.
TNMG160404-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Silver coating, reliable chip control and a geometry tuned for cast iron to maintain high productivity and consistent surface quality; order the TNMG160404-MK5 WKK10S directly via Metav Werkzeuge or consult our team for application advice. TNMG160404-MK5 WKK10S turning indexable insert — Tiger‑tec Silver, for cast iron (Walter Tools) The TNMG160404-MK5 WKK10S is a triangular 60° turning insert in the Tiger‑tec Silver series, engineered for productive and wear‑resistant machining of cast iron components. Tiger‑tec Silver coating technology Optimised for cast iron machining Triangle 60° form, 0.4 mm nose radius MK5 chipbreaker for controlled chips Increase throughput with a grade built for abrasiveness The Tiger‑tec Silver WKK10S grade combines a wear‑resistant coated carbide with a geometry optimised for the typical short, brittle chips of cast iron. This results in stable cutting performance during continuous turning and fewer tool changes, which directly supports higher machine uptime and lower cycle costs. The insert’s construction balances hardness and toughness: the coating reduces abrasive wear while the substrate maintains edge integrity, offering a reliable compromise between tool life and cutting stability. Precise geometry for consistent part quality A triangular 60° form with a 0.4 mm nose radius and a negative 0° rake angle delivers repeatable contact conditions and dimensional stability in finishing and general turning operations. The insert’s tolerance class M ensures consistent fit and repeatability in the toolholder, reducing setup variation. Those characteristics translate into fewer scrapped parts and consistent surface finishes when machining grey or nodular cast iron, even under varying feed conditions. Efficient chip control and process security with MK5 The integrated MK5 chipbreaker is designed to break and evacuate the short, fragmented chips typical of cast iron, reducing the risk of chip re‑cutting and stabilising the cut. Controlled chip formation improves safety around the machine and supports unattended cycles. Combined with the Tiger‑tec Silver coating, the MK5 chip control helps maintain a stable cutting edge over multiple passes, meaning predictable performance and lower overall tooling consumption. Practical application and compatibility The insert is intended specifically for machining cast iron materials and is identified by the ISO designation TNMG160404-MK5 WKK10S. Its dimensions correspond to standard toolholders for TNMG‑type inserts, enabling straightforward integration into existing turning setups. The negative rake and robust grade make it suitable for medium to heavy interrupted cuts that are common in foundry component machining. Why choose this Walter Tools grade Choosing a grade from the Tiger‑tec Silver family offers a proven balance of process reliability and economy for cast iron production. The WKK10S composition emphasises abrasive wear resistance while the insert form and chipbreaker enhance operational stability. For production environments where repeatability and tool change intervals affect throughput, this configuration supports measurable improvements in efficiency and part quality. For specification matching, cutting parameter recommendations or to source the TNMG160404‑MK5 WKK10S from Walter Tools, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMG160404-MK5-WKK10S-WALTER SKU / designation: TNMG160404-MK5 WKK10S Series / grade: Tiger‑tec Silver / WKK10S Facts Inscribed circle / size: 16 Thickness: 04 Corner radius: 0.4 mm Plate form: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MK5 Coating / technology: Tiger‑tec Silver (coated carbide) Application: Cast iron (K) Execution: G FAQ What materials is this insert designed for? The TNMG160404‑MK5 WKK10S is specified for machining cast iron materials and is optimised for the abrasive, short‑chip behaviour typical of these alloys. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on the TNMG160404‑MK5 promotes controlled chip segmentation for safer evacuation and more stable cutting when turning cast iron. Is the insert compatible with standard TNMG toolholders? Yes, the TNMG160404‑MK5 WKK10S conforms to standard TNMG geometry and fits compatible toolholders that accept TNMG‑type triangular inserts. Walter AG (brand: Walter Tools) is part of the Sandvik Group and is a leading manufacturer of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners; items offered are original, factory‑new products of the stated manufacturers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TNMG160404-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
The combination of a robust WKK20S grade and the MK5 chipbreaker delivers consistent chip control and long tool life for cast iron turning; the triangular 60° geometry and 0.4 mm corner radius support precise, repeatable operations. Order genuine Walter Tools inserts via Metav Werkzeuge or contact our consultants for application advice. TNMG160404-MK5 WKK20S — Indexable turning insert, Tiger‑tec Silver, for cast iron | Walter Tools The TNMG160404-MK5 WKK20S is a triangular indexable insert engineered for productive, abrasion‑resistant turning of cast iron components in industrial machining. Tiger‑tec Silver coating for durability Optimised MK5 chipbreaker for stable chips Triangular 60° form for versatile turning Suited to cast iron machining (ISO group K) Reliable chip control and extended tool life The combination of the MK5 chipbreaker with the Tiger‑tec Silver technology produces stable, short chips and reduces abrasive wear when machining cast iron. As a coated carbide grade, WKK20S is formulated for the characteristic, brittle chips and high abrasion of grey and nodular cast irons; this results in fewer interruptions, longer effective edge life and higher process reliability. The design emphasises consistent performance under the typical conditions of heavy‑duty turning, so machining cycles remain productive and predictable. Accurate geometry for repeatable turning A triangular 60° form with an inscribed circle of 16 mm, a thickness of 4.00 mm and a corner radius of 0.4 mm provides a balance between strength and finishing capability. The 0° relief (negative) rake increases edge robustness for interrupted cuts and roughing passes while the defined corner radius supports reproducible surface quality on turned components. Together, these geometric parameters simplify setup and enable repeatable part tolerances in batch production without frequent tool interventions. Built for demanding cast iron production Tolerance class M and the proven Walter Tools gradeing assure consistent indexable insert dimensions and edge quality across batches. The WKK20S grade targets abrasive‑wear resistance, making this insert suitable for series turning where predictable tool life and surface integrity matter. Using this insert in a stable toolholder and matched cutting data reduces downtime, enhances throughput and supports a cost‑efficient machining strategy for cast iron workpieces. For tailored application advice and to secure genuine Walter Tools Tiger‑tec Silver TNMG160404‑MK5 WKK20S inserts for cast iron machining, contact Metav Werkzeuge GmbH by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will assist with grade selection and stock availability. Technical data Article number: TNMG160404-MK5-WKK20S-WALTER Designation: TNMG160404-MK5 WKK20S Product type: Indexable turning insert Manufacturer: Walter Tools Core data Inscribed circle: 16 mm Thickness: 4.00 mm Corner radius: 0.4 mm Shape/angle: Triangle 60° Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S Chipbreaker: MK5 Material group: K (cast iron) Form: TNMG triangular insert SKU: TNMG160404-MK5-WKK20S-WALTER FAQ What materials is this insert best suited for? This insert is optimised for cast iron machining (ISO group K); the WKK20S grade and Tiger‑tec Silver coating resist abrasive wear typical of cast materials. What advantage does the MK5 chipbreaker offer? The MK5 chipbreaker creates short, controlled chips and improves heat evacuation and surface stability when using the TNMG160404‑MK5 insert on cast iron. Which geometric data define this insert? The insert is triangular 60° with a 16 mm inscribed circle, 4.00 mm thickness and a 0.4 mm corner radius; the relief is 0° (negative) for a robust cutting edge. Is this insert suitable for interrupted cuts? Yes — the negative rake and wear‑resistant WKK20S grade make the insert well suited to interrupted and heavy turning operations on cast iron. How can the SKU be used to order the correct item? Order or reference SKU TNMG160404‑MK5‑WKK20S‑WALTER to ensure the correct Tiger‑tec Silver triangular insert is supplied. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160404-MM5 WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the MM5 chipbreaker and a triangular 60° geometry for reliable machining of stainless steel; order the TNMG160404-MM5 WMP20G insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404-MM5 WMP20G – Indexable turning insert, Tiger·tec Gold coating, for stainless steel (Walter Tools) TNMG160404-MM5 WMP20G is a triangular indexable turning insert engineered for medium to robust machining of stainless steel (ISO M), combining a wear-resistant grade with reliable chip control. Tiger·tec Gold coating for extended tool life Optimised MM5 chipbreaker for stable chip control Triangular 60° form, 0.4 mm corner radius Designed for stainless steel (ISO M) machining High process reliability through advanced coating and grade The combination of Tiger·tec Gold technology and the WMP20G grade provides a coated carbide substrate that supports stable chip formation when machining demanding materials. This configuration reduces flank wear and helps maintain a consistent cutting edge under medium to robust conditions. The result is fewer tool changes and improved machine uptime, which directly contributes to process economy and predictable cycle times in production environments. Geometry and chip control that reduce rework and downtime A triangular 60° plate form with an optimised MM5 chipbreaker and a 0.4 mm corner radius ensures secure chip evacuation and controlled cutting forces. The insert’s 0° (negative) front clearance delivers a robust cutting edge that copes well with interruptions and varied feed rates. These geometric choices provide repeatable performance and support stable surface finish, especially when working with tougher stainless steel grades that tend to form built-up edges. Practical application guidance for reliable integration This indexable insert is designed primarily for stainless steel (ISO M) turning operations in workshops and production settings where repeatability and edge stability matter. The coated grade and chipbreaker configuration make the insert suitable for medium to heavy-duty passes and for parts where heat generation and material toughness present a challenge. For toolholders and clamping, standard turning tool systems compatible with triangular inserts are appropriate; routine indexing of the insert extends overall tool life and optimises cost per edge. For application advice or to procure Walter Tools inserts with Tiger·tec Gold performance, contact Metav Werkzeuge for expert guidance and swift processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMG160404-MM5-WMP20G-WALTER Designation: TNMG160404-MM5 WMP20G Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Grade: WMP20G Chipbreaker: MM5 Core data Plate size: 16 mm Corner radius: 0.4 mm Front clearance: 0° (negative) Plate form: Triangle 60° Plate thickness: 04 Materials & features Coated carbide Suitable for stainless steel (ISO M) Negative rake geometry Triangular 60° cutting edge FAQ What materials is this insert suited for? The TNMG160404-MM5 WMP20G insert is specified for machining stainless steel (ISO M), where its coated grade and chip control help manage toughness and heat generation. What benefit does the MM5 chipbreaker provide? The MM5 chipbreaker is optimised for reliable chip formation and evacuation; in the TNMG160404-MM5 WMP20G it supports consistent cutting and reduces the likelihood of built-up edge. How does the triangular 60° form affect use? A triangular 60° form gives multiple indexing positions and a compact cutting geometry that balances strength and accessibility for turning operations with varied geometries. Is the insert suitable for interrupted cuts and heavy-duty turning? The negative rake and robust edge preparation make this grade and geometry appropriate for more demanding turning passes in stainless steel under medium to robust conditions. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of Walter Tools.
TNMG160404-MM5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust triangular geometry for consistent chip control and longer edge life when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult the technical team for application advice. TNMG160404-MM5 WMP20S — Turning insert, Tiger·tec Silver, for rostfreier Stahl — Walter Tools TNMG160404-MM5 WMP20S is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, providing stable cutting performance in demanding production environments. Tiger·tec Silver coating for stable cutting Designed for rostfreier Stahl machining Triangular 60° geometry, 0.4 mm corner radius Consistent chip control and edge security for rostfreier Stahl The combination of the WMP20S grade and Tiger·tec Silver coating is engineered to reduce built-up edge and improve thermal resistance during turning of rostfreier Stahl. The dedicated MM5 chipbreaker supports secure chip formation, which lowers the risk of interruptions and contributes to a more reliable cycle time. For shops seeking predictable tool life, this approach translates into fewer indexings and steadier part quality. Geometry that balances strength and surface finish A triangular 60° form with a 0.4 mm corner radius and negative 0° relief offers a reinforced cutting edge that resists chipping under heavier cuts. This geometry enables stable cutting forces and helps to maintain dimensional accuracy over longer runs. The indexable insert’s sturdy design is particularly advantageous in mixed-batch production where frequent tool changes would otherwise reduce throughput. Practical compatibility and process advantages With a nominal size of 16 and thickness code 04, the insert integrates easily into standard turning toolholders for general turning operations on rostfreier Stahl. The coated, wear-resistant grade suits medium to robust conditions and supports a consistent surface finish with less rework. Combined with sensible machining parameters and the manufacturer’s tooling recommendations, the insert helps to improve overall process efficiency and reproducibility. For reliable machining of rostfreier Stahl with proven Tiger·tec Silver performance, request the Walter Tools TNMG160404-MM5 WMP20S from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and supply options. Technical data Article number: TNMG160404-MM5-WMP20S-WALTER Designation: TNMG160404-MM5 WMP20S Manufacturer: Walter Tools Core specifications Size: 16 Thickness: 04 Corner radius: 0.4 mm Geometry angle: 60° Relief angle: 0° (negative) Special features Coating: Tiger·tec Silver Grade: WMP20S Chipbreaker: MM5 Material suitability: rostfreier Stahl Series: Tiger-tec Silver FAQ What materials is this insert designed for? The Walter Tools TNMG160404-MM5 WMP20S is specified for machining rostfreier Stahl, offering secure chip formation and heat resistance for these alloys. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WMP20S grade improves thermal stability and reduces tendency for built-up edge, which helps to extend tool life and maintain consistent part quality. Which geometry and radius are recommended for robust turning tasks? The triangular 60° geometry with a 0.4 mm corner radius provides a strong cutting edge suited to medium and robust turning applications using the TNMG160404-MM5 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; no affiliation between Metav Werkzeuge and the respective trademark owners is implied. The offered article is an original, factory-new product of Walter Tools.
TNMG160404-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of a thermally stable coating and a robust chipbreaker to keep turning operations productive and predictable; the insert’s triangular geometry and 0.4 mm corner radius provide a balanced mix of precision and edge strength for machining rostfreier Stahl and heat-resistant alloys. Order directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404-MM5 WSM10S indexable turning insert (Triangle 60°, WSM10S) by Walter Tools The TNMG160404-MM5 WSM10S is a triangular indexable turning insert designed for heavy-duty turning of rostfreier Stahl and heat‑resistant superalloys in demanding production environments Tiger·tec Silver coating for thermal stability Optimised MM5 chipbreaker for secure chip control Triangle 60° geometry, 0.4 mm corner radius Longer tool life through a thermal‑resistant grade The Tiger·tec Silver coating combined with the WSM10S grade offers a coated carbide solution that prioritises thermal resistance and consistent wear behaviour. For machining rostfreier Stahl and similar hard‑to‑cut alloys, temperature management at the cutting edge reduces the risk of premature flank wear and built‑up edge; this results in fewer interruptions, longer index cycles and a steadier surface finish. The grade’s formulation supports secure chip formation for tougher materials, improving overall process reliability. Stable machining thanks to precise chip control The MM5 chipbreaker is engineered to support predictable chip formation when turning ductile, work‑hardening materials. By breaking and guiding chips into controllable segments, the geometry reduces the likelihood of tangling, limits vibration and helps maintain a constant cutting force. In practice, this means fewer machine stops and a reduction in manual intervention, thereby increasing throughput and delivering a more consistent part quality with each indexing step. Robust edge geometry for strength and accuracy A triangle 60° insert with a 0.4 mm corner radius offers a compromise between a strong cutting edge and dimensional precision. The 0° (negative) clearance contributes to a more robust edge that tolerates interrupted cuts and heavier depths of cut without chipping. This geometry supports stable tool life while still allowing good surface quality; the modest nose radius maintains positional accuracy on the workpiece and reduces the need for subsequent finishing passes. Designed for integration into standard turning systems Classified for ISO groups M and S, the insert is suited to rostfreier Stahl and heat‑resistant superalloys where thermal stability and edge integrity are critical. The designation TNMG160404‑MM5 WSM10S follows standard indexable insert nomenclature, enabling straightforward selection of compatible TNMG 60° triangular holders. The combination of grade, chipbreaker and geometry delivers a balance of process security and productivity that is valuable in batch production or continuous turning applications. Contact Metav Werkzeuge for tailored application support on the Walter Tools TNMG160404‑MM5 WSM10S insert and discover how this grade and geometry can improve process stability; info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: TNMG160404-MM5-WSM10S-WALTER Designation: TNMG160404-MM5 WSM10S Manufacturer: Walter Tools Data Insert size: 16 Thickness: 04 Corner radius: 0.4 mm Clearance angle: 0° (negative) Insert shape: Triangle 60° Grade: WSM10S Chipbreaker: MM5 Tolerance class: M Special features Series: Tiger·tec Silver Material applicability: S / M Application focus: rostfreie Stähle and heat‑resistant superalloys Coated carbide grade for thermal stability FAQ What materials is this insert suitable for? The TNMG160404‑MM5 WSM10S insert is specified for ISO groups M and S, meaning it is suitable for rostfreier Stahl and heat‑resistant superalloys as indicated by the WSM10S grade. How does the MM5 chipbreaker affect turning performance? The MM5 chipbreaker promotes controlled chip segmentation and evacuation, which improves process stability and reduces the risk of chip entanglement during extended turning cycles. Is the insert appropriate for interrupted cuts? Yes. The negative clearance and the 0.4 mm corner radius provide a robust cutting edge that tolerates interruptions and heavier engagement, helping to avoid chipping under load. Can this insert be used in standard TNMG toolholders? The insert follows the TNMG160404 designation and is compatible with toolholders designed for TNMG 60° triangular inserts, enabling straightforward integration into existing turning systems. What benefit does the Tiger·tec Silver series provide? The Tiger·tec Silver series is a coating technology that enhances thermal resistance and wear performance, contributing to longer index life and consistent machining in demanding materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer.
TNMG160404-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the WSM20S grade and Tiger‑tec Silver technology paired with the MM5 chipbreaker for reliable, repeatable machining of stainless steels and heat‑resistant alloys; the insert’s negative geometry and compact corner radius offer controlled chip formation and extended tool life. Order the TNMG160404‑MM5 WSM20S directly from Metav Werkzeuge or request application advice from our specialists. TNMG160404‑MM5 WSM20S — Turning Insert (Tiger‑tec Silver) by Walter Tools, for stainless steel and superalloys TNMG160404‑MM5 WSM20S is a triangular 60° turning insert designed for demanding applications in stainless steels and heat‑resistant superalloys, delivering stable chip control and consistent cutting performance. Tiger‑tec Silver coating for heat resistance Optimised chip control with MM5 breaker 60° triangle insert with 0.4 mm corner radius Negative 0° clearance for secure cutting edges Improve machining of stainless and heat‑resistant alloys with reliable coating technology The Tiger‑tec Silver coating and the WSM20S grade are formulated to cope with the specific demands of stainless steel and superalloys (ISO groups M and S). These materials generate heat and tend to form built‑up edge; the coated carbide substrate combined with the MM5 chipbreaker promotes stable chip formation and reduces the risk of edge failure. As a result, process security increases and downtime for insert changes is reduced, supporting predictable cycle times in serial production. Geometry that balances strength and edge definition for finish and semi‑roughing A 60° triangular shape with a 0.4 mm corner radius and negative 0° relief provides a robust cutting edge that tolerates interruption and variable cutting forces. The compact corner radius supports controlled surface finish without sacrificing edge stability under thermal load. The insert size 16 and standard thickness deliver a versatile package for a range of holders and turning operations, enabling efficient transitions between semi‑roughing and finishing passes with minimal tool changeover. Productivity advantages: longer life, fewer interruptions, consistent results The combination of a wear‑resistant coating and a stable grade reduces flank wear and maintains dimensional consistency across batches. This leads to lower tooling consumption and fewer machine stoppages for index changes, which improves overall throughput. Walter Tools’ design focus on process stability and a controlled chip flow makes this insert a cost‑effective option where machining reliability and component quality are decisive factors. Protected trademarks and product names belong to their respective owners; the offered article is an original, factory‑new product of the manufacturer. Contact Metav Werkzeuge for tailored advice on cutting parameters, availability and suitable toolholders for the Tiger‑tec Silver TNMG160404‑MM5 WSM20S; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: TNMG160404‑MM5‑WSM20S‑WALTER Label: Drehwendeschneidplatte TNMG160404‑MM5 WSM20S Walter Tools Manufacturer: Walter Tools Facts Insert size: 16 mm Corner radius: 0.4 mm Thickness: 04 Relief/clearance: 0° (negative) Shape: Triangle 60° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM20S (coated carbide) Chipbreaker: MM5 Suitable materials: stainless steel (M), heat‑resistant superalloys and titanium (S) Execution: G FAQ What materials is this insert best suited for? The TNMG160404‑MM5 WSM20S insert is optimised for stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where thermal load and tough cutting conditions demand a heat‑resistant grade. Can this insert be used for both finishing and semi‑roughing? Yes, the triangular 60° geometry with a 0.4 mm corner radius and the MM5 chipbreaker provide a balance between edge strength and surface quality, making the insert suitable for both semi‑roughing and finishing operations. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal resistance and reduces adhesive wear, which helps to preserve the cutting edge under high temperatures and extend the usable life of the insert. Is the TNMG160404‑MM5 WSM20S compatible with standard holders? The insert follows the TNMG form factor and fits compatible triangular turning toolholders designed for 60° TNMG inserts; verify seat dimensions and clamping style for secure mounting. What chip control can be expected with the MM5 breaker? The MM5 chipbreaker is designed to produce short, controllable chips when machining stainless steels and superalloys, reducing the risk of long, entangling chips and improving process reliability. Hersteller: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TNMG160404-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver technology and the WSM30S grade for stable cutting in stainless steels and high-temperature alloys; the triangle 60° form with a 0.4 mm corner radius and MM5 chipbreaker deliver predictable chip control and extended tool life. Order the TNMG160404-MM5 WSM30S indexable turning insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404-MM5 WSM30S indexable turning insert — triangle 60°, r0.4 — Walter Tools The TNMG160404-MM5 WSM30S is an indexable turning insert designed for precision machining of stainless steels and heat-resistant superalloys in demanding production environments Tiger·tec Silver coating for extended tool life Suitable for stainless steels and superalloys Triangle 60° form with 0.4 mm corner radius MM5 chipbreaker for controlled chip formation High-performance turning for stainless steels and superalloys The coated WSM30S grade, part of the Tiger·tec Silver family, is tailored to the specific challenges of machining stainless steels and high-temperature alloys. Its substrate and coating combination increase thermal resistance and support a stable cutting edge, reducing the tendency for built-up edge formation that commonly affects tough, ductile materials. For production runs where repeatable surface quality and tool life are essential, this insert offers a measurable improvement in process stability and component consistency. Predictable chip control that supports productivity Equipped with the MM5 chipbreaker and a triangle geometry, the insert produces short, controllable chips across a range of feeds and depths of cut. The chip former is balanced for medium cutting conditions and helps prevent chip entanglement in turning operations. Controlled chip formation reduces machining interruptions, lowers rework risk and contributes directly to higher machine utilisation and shorter cycle times — a rational benefit for process planners focused on throughput. Geometry and edge design for reliable tool life The triangle 60° form combined with a 0.4 mm (r0.4) corner radius and negative 0° rake angle delivers a compromise between edge strength and form accuracy. The robust edge geometry increases resistance to mechanical and thermal loading, while the insert’s tolerance class M supports consistent positioning and repeatability in tool holders. This results in dependable performance during repeated indexing and simple set-up routines that save time at the tool change stage. Application-focused coating and material compatibility The chemical and mechanical characteristics of the Tiger·tec Silver coating on WSM30S enhance adhesion and heat protection, which is particularly valuable when machining materials that dissipate heat poorly. The specification indicates suitability for the ISO groups M and S, meaning the insert is appropriate for stainless steels and for heat-resistant superalloys/titanium respectively. This versatility makes the insert a sensible choice where mixed material batches or demanding alloys are part of the production mix. For machining tasks that demand stable cutting edges and consistent chip control, consider the Walter Tools TNMG160404-MM5 WSM30S as a reliable option — contact Metav Werkzeuge for tailored recommendations and fast availability Technical data Article number: TNMG160404-MM5-WSM30S-WALTER Product type: Indexable turning insert Brand: Walter Tools ISO designation: TNMG160404-MM5 WSM30S Grade/series: Tiger·tec Silver / WSM30S Facts Insert shape: Triangle 60° Corner radius: 0.4 mm Thickness: 04 Relief angle: 0° (negative) Chipbreaker: MM5 Tolerance class: M Applicable material groups: S / M Special features Coating: Tiger·tec Silver (coated carbide) Recommended for: stainless steels and heat-resistant superalloys Series description: WSM30S — coated carbide grade optimised for tough materials Execution: G FAQ What materials is the insert suitable for? The TNMG160404-MM5 WSM30S insert is specified for ISO groups M and S, making it suitable for stainless steels and heat-resistant superalloys (including titanium). How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WSM30S grade improves thermal resistance and wear behaviour, which supports longer tool life and more consistent cutting-edge performance in demanding turning operations. Which chipbreaker is integrated and what is its advantage? The insert uses the MM5 chipbreaker, which is engineered for controlled, short-chip formation under medium cutting conditions, reducing risk of chip entanglement and downtime. Is the geometry suitable for finishing and semi-finishing operations? The triangle 60° form with a 0.4 mm corner radius and a negative 0° relief angle provides robustness for semi-finishing and allows reliable edge stability where repeatable surface quality is required. How does the tolerance class affect mounting and repeatability? Tolerance class M ensures consistent seat and positioning accuracy in compatible tool holders, aiding in predictable indexing and repeatable machining results. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves clarification only and does not indicate any affiliation between our company and the named manufacturers.
TNMG160404-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the MP3 chipbreaker and a robust triangle geometry for consistent steel machining performance; order the TNMG160404‑MP3 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404‑MP3 WPP10G Turning insert, Tiger‑tec Gold (for steel) — Walter Tools A TNMG160404‑MP3 WPP10G indexable turning insert designed for steel machining, offering a Tiger‑tec Gold coated substrate, MP3 chip control and a 0° negative rake for demanding production environments. Tiger‑tec Gold coated carbide grade WPP10G Optimised MP3 chipbreaker for steel Triangle 60° insert with 0.4 mm corner radius 0° negative rake for robust cutting Longer tool life through advanced coating technology The Tiger‑tec Gold coating provides a hard, wear‑resistant surface that extends service intervals and improves flank wear behaviour when machining steel. As a coated carbide grade, WPP10G is tuned for the thermal and mechanical demands of turning operations on ISO group P materials, delivering a reliable balance between wear resistance and toughness. This results in fewer tool changes and more steady production cycles with consistent part quality. Stable chip control and predictable process behaviour The MP3 chipbreaker is engineered specifically for steel applications to produce controllable chip segmentation and evacuation. Controlled chip formation reduces the risk of entanglement and protects both the tool and the workpiece from irregular forces. The combination of chipbreaker geometry and the coated substrate promotes repeatable cutting conditions, supporting higher machine uptime and stable cycle times in series production. Robust geometry suited to heavy and interrupted cuts The triangle 60° form with a 0.4 mm corner radius and a 0° (negative) free angle creates a sturdy cutting edge that resists thermal and mechanical shock. Negative rake geometry increases cutting edge strength for roughing or interrupted cuts, while the compact triangular design offers three usable cutting edges per insert, improving economy and changeover efficiency. This geometry is particularly effective where durability and edge stability are priorities. Easy integration into production and predictable specification The insert adheres to common TNMG sizing and tolerance standards, allowing straightforward integration into existing toolholders and tool management routines. With a clear designation and tolerance class M, planning for inventory, regrinding cycles and process documentation becomes simpler. The substrate and chipbreaker choices make the insert suitable for a broad spectrum of steel grades encountered in day‑to‑day turning tasks. Contact Metav Werkzeuge today for tailored application advice on Walter Tools Tiger‑tec Gold inserts or to arrange procurement via Metav Werkzeuge by email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: TNMG160404-MP3-WPP10G-WALTER Designation: TNMG160404-MP3 WPP10G Manufacturer: Walter Tools Series / grade: Tiger‑tec Gold / WPP10G Numbers / Core technical data Insert size: 16 mm Corner radius: 0.4 mm Thickness code: 04 Free angle: 0° (negative) Designs / Special features Coating / series: Tiger‑tec Gold Chipbreaker: MP3 Geometry: Triangle 60° Substrate: coated carbide Tolerance class: M Execution: G Suitable for: Steel (ISO group P) FAQ What materials is this insert designed for? The TNMG160404‑MP3 WPP10G insert is formulated for machining steel (ISO group P) and is optimised for the typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the MP3 chipbreaker benefit machining? The MP3 chipbreaker on this Walter Tools insert produces controlled chip segmentation for safer evacuation, reducing rework and tool/interface damage while maintaining consistent surface finish. Can the insert handle interrupted cuts and heavy roughing? Yes, the negative 0° rake and the triangular 60° geometry with a 0.4 mm corner radius provide enhanced edge strength, making the insert suitable for demanding and interrupted cutting conditions. How many cutting edges are available per insert? The triangular form gives three indexed cutting edges per insert, which helps to extend tool life per unit and improves cost efficiency in serial operations. Is the Tiger‑tec Gold coating suitable for high‑temperature conditions? The Tiger‑tec Gold coating enhances wear resistance at elevated temperatures commonly encountered in steel turning, supporting longer tool life and steady performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names mentioned are used for explanatory purposes only; no connection between our company and the brands is implied. The offered article is original, brand‑new manufacturer's goods.
TNMG160404-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a wear-resistant coated carbide grade combined with a reliable chipbreaker and stable negative rake for consistent steel turning. Benefit from extended tool life, dependable chip control and straightforward integration into standard turning operations. Order the insert directly via Metav Werkzeuge or consult our technical advisors for machining recommendations. TNMG160404-MP3 WPP20G Drehwendeschneidplatte – Tiger·tec Gold, 0° negative rake, Walter Tools The TNMG160404-MP3 WPP20G is a triangular indexable insert designed for versatile steel turning applications, offering robust chip control and the performance of Tiger·tec Gold coating. Tiger·tec Gold coating for long tool life Optimised MP3 chipbreaker for steel Triangle 60° form, 16 mm size 0° negative rake for stable cutting Consistent productivity through a high-performance grade The combination of a coated carbide substrate and the Tiger·tec Gold technology delivers a reliable balance between wear resistance and toughness. This makes the insert particularly suited to continuous and serial machining of Steel (P) where thermal and mechanical stresses are common. The WPP20G grade is engineered to maintain a stable cutting edge, reducing the frequency of index changes and contributing directly to uptime and predictable tool costs. Predictable chip control and stable cutting geometry Equipped with the MP3 chipbreaker, the insert ensures controlled chip formation under typical steel cutting conditions, which simplifies swarf handling and minimises interruptions. The triangle 60° geometry combined with a 0.4 mm corner radius provides a compromise between strength and finishing capability. The 0° negative rake increases edge robustness, supporting interrupted cuts and heavy cross-sections while maintaining dimensional stability. Application guidance and machining advantages For general turning operations in unalloyed and alloyed steels, the insert achieves consistent surface quality and process security. The tolerance class M and the standardised 16 mm size simplify toolholder selection and indexing procedures. As a universal solution within the Tiger·tec Gold family, this insert supports a wide range of speeds and feeds, favouring shop-floor flexibility and fewer inventory variants when machining diverse steel grades. Integration and handling in the tool system The insert thickness code and triangular form make it compatible with common clamping systems for TNMG-style inserts. The robust edge properties of WPP20G support repeatable performance and enable cost-effective operations across medium and high-volume production. Where process reliability and reproducible results are priorities, the insert’s design reduces the need for excessive trial-and-error in parameter set-up. For precise selection or to discuss cutting parameters for specific steel grades, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and procurement support. Technical data SKU: TNMG160404-MP3-WPP20G-WALTER Designation: TNMG160404-MP3 WPP20G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Insert form: Triangle 60° Size: 16 Corner radius: 0.4 mm Thickness code: 04 Chipbreaker: MP3 Free rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold) Material: Coated carbide Application: Steel (P) according to ISO 513 Execution: G FAQ Which materials is this insert intended for? The TNMG160404-MP3 WPP20G from Walter Tools is intended primarily for Steel (P) applications, designed to handle common unalloyed and alloyed steels with controlled chip formation. What benefits does the Tiger·tec Gold grade provide? Tiger·tec Gold on the WPP20G grade improves wear resistance and edge life, enabling more consistent tool life and reduced indexing frequency in standard turning operations. Is the MP3 chipbreaker suitable for finishing passes? The MP3 chipbreaker is optimised for steel and offers good chip control across medium cutting depths; it supports both general finishing and medium-duty machining where stable chips are required. How does the 0° negative rake affect machining? The 0° negative rake increases edge strength, making the insert resilient in interrupted cuts and heavy engagement situations while maintaining dimensional stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer (Walter Tools).
TNMG160404-MP3 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, precise MP3 chipbreaker control and a 0° negative rake for stable, repeatable steel machining; order the TNMG160404-MP3 WPP30G turning insert directly via Metav Werkzeuge or contact the consultants for tailored cutting data and application advice. TNMG160404-MP3 WPP30G turning insert – Tiger·tec Gold coated, for steel (Walter Tools) The TNMG160404-MP3 WPP30G is a triangle 60° turning insert engineered for reliable and productive steel machining across a wide range of cutting conditions. Tiger·tec Gold coated carbide Optimised MP3 chipbreaker Triangle 60° form, 0.4 mm nose radius Negative 0° rake for stable cutting Consistent chip control for higher productivity The combination of the Tiger·tec Gold coating and the MP3 chipbreaker ensures consistently controlled chip formation during turning operations. The coated carbide construction delivers improved wear resistance under the typical temperatures encountered when machining steel, while the chipbreaker geometry reduces the risk of long, entangling chips and helps to maintain a steady metal removal rate. As a result, process interruptions are minimised and cycle times become more predictable, supporting a more efficient production flow. Robust edge geometry for repeatable performance The insert’s triangle 60° configuration with a 0.4 mm nose radius and negative 0° rake provides a strong cutting edge that resists chipping and performs well in interrupted cuts. The combination of edge shape and tolerance class supports consistent contact with the workpiece and helps to extend edge life, which reduces the frequency of index changes. This robustness translates into fewer tool interventions on the shop floor and enhanced overall equipment effectiveness. Tailored for ISO P materials and standard turning tasks Designed for the ISO P material group, this grade is optimised for typical steel applications — from general-purpose turning to more demanding alloyed steel operations. The material coding indicates suitability for unalloyed and alloyed steels and the coated carbide grade balances hardness and toughness to cope with the heat and forces of steel machining. For customers with mixed batches or variable feed rates, the insert offers reliable performance without the need for constant parameter adjustments. Practical integration and production benefits The geometry and designation conform to standard TNMG interfaces, allowing quick replacement in compatible toolholders and reducing setup time. The WPP30G grade aims to provide an economical balance between tool life and surface quality, meaning fewer tool changes and stable part tolerances over longer runs. For manufacturing environments seeking reproducibility and lower per-piece tooling cost, this insert supports reproducible results while simplifying inventory thanks to its universal steel focus. Contact Metav Werkzeuge today for cutting data, holder recommendations or a suitability check for the WPP30G grade; email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice from the Metav Werkzeuge team Technical data Article number: TNMG160404-MP3-WPP30G-WALTER Designation: TNMG160404-MP3 ISO designation: TNMG160404-MP3 WPP30G Grade: WPP30G Series: Tiger·tec Gold Manufacturer: Walter Tools Numbers / Core technical data Inscribed circle / size: 16 mm Nose radius: 0.4 mm Thickness code: 04 Form angle: 60° Free rake: 0° (negative) Chipbreaker: MP3 Tolerance class: M Special features / Versions Coated carbide grade (Tiger·tec Gold) Optimised chip control (MP3) Intended material group: ISO P (steel) Execution: G Suitable for a wide range of steel turning applications FAQ What materials is this insert suitable for? The TNMG160404-MP3 WPP30G turning insert from Walter Tools is designed primarily for ISO P materials, meaning it is suitable for unalloyed and alloyed steel common in general turning applications. What benefits does the MP3 chipbreaker offer? The MP3 chipbreaker provides controlled chip formation and evacuation, improving surface finish and reducing the likelihood of chip-related stoppages when machining steel with this Walter Tools insert. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, which enhances edge life and contributes to greater process security in serial production. Which edge geometry does the insert use and what is its advantage? The insert features a triangle 60° form with a 0.4 mm nose radius and a negative 0° rake, offering a robust edge that resists chipping and performs well under interrupted cutting conditions. Is the TNMG160404-MP3 WPP30G compatible with standard TNMG toolholders? Yes, the designation and geometry conform to standard TNMG mounting standards; verify seating geometry and clamping suitability with the chosen holder before first use. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
TNMG160404-MP5 WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade for a balanced mix of wear resistance and toughness, the MP5 chipbreaker for stable chip control, and the 60° triangular geometry with a 0.4 mm corner radius for dependable steel turning; order directly via Metav Werkzeuge or consult our specialists for application data. TNMG160404-MP5 WPP10G — Triangle 60° indexable turning insert, coated grade for steel — Walter Tools The TNMG160404-MP5 WPP10G is a triangular 60° indexable turning insert engineered for productive machining of steel components, combining a Tiger·tec Gold coating with a robust MP5 chipbreaker for stable cutting performance. Tiger·tec Gold coated carbide grade WPP10G Robust MP5 chipbreaker for stable chip control 60° triangular geometry with 0.4 mm radius Optimised for steel machining (ISO P) Improved process stability for steel turning The combination of the Tiger·tec Gold coating and the WPP10G grade delivers a balance between wear resistance and toughness that supports longer tool life and consistent part quality when machining steels. The MP5 chipbreaker is designed to produce predictable chips in the common turning ranges for ISO P materials, reducing the risk of built-up edge and interruptions to production. This results in fewer tool changes, steadier feeds and improved cycle-time reliability without sacrificing surface finish. Geometry and edge design for consistent dimensional accuracy A triangular 60° form with a 0.4 mm corner radius provides a favourable compromise between edge strength and profile detail, making the insert suited to both medium and heavier cuts. The 0° (negative) free rake angle increases edge robustness under load and supports interrupted cuts or slightly unstable clamping conditions. Tolerance class M ensures interchangeability and repeatable seating in tool holders, which simplifies setup and maintains component accuracy across batches. Economic benefits and integration into production Specified for the ISO P workpiece group, this indexable plate is particularly cost-effective for series turning of unalloyed and alloyed steels by reducing downtime and delivering longer tool life versus uncoated grades. The coated carbide construction gives overlap between roughing and finishing windows, enabling fewer tool variants on the shelf and simpler tooling strategies. As an indexable insert, it supports fast corner changes and predictable tool-management routines that positively affect overall machining productivity. For steel turning applications that require a reliable, long‑life solution, contact Metav Werkzeuge for availability, batch pricing and cutting data for the TNMG160404-MP5 WPP10G from Walter Tools — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: TNMG160404-MP5-WPP10G-WALTER Item designation: TNMG160404-MP5 WPP10G Manufacturer: Walter Tools Series: Tiger-tec Gold Core data Plate size: 16 mm Thickness: 4 mm Corner radius: 0.4 mm Free rake angle: 0° (negative) Geometry: Triangle 60° Tolerance class: M Materials & Features Coating: Tiger·tec Gold (coated carbide) Grade: WPP10G Chipbreaker: MP5 Application: Steel (ISO P) Execution: G Base designation: TNMG160404-MP5 Suitable for: steel machining FAQ What workpiece materials is this insert suitable for? The TNMG160404-MP5 WPP10G is tailored for the ISO P group, meaning it is optimised for machining unalloyed and alloyed steel materials. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker stabilises chip formation during turning, so the insert produces predictable chips and helps maintain consistent cutting conditions with reduced risk of built-up edge. Is the geometry good for interrupted cuts? Yes. The 60° triangle form with a 0.4 mm corner radius and 0° (negative) rake increases edge strength, which is beneficial for interrupted or heavy cuts. Can this insert be used for finishing and roughing? The Tiger·tec Gold coating and WPP10G grade offer a wear/toughness balance that allows a productive overlap between roughing and finishing windows in many steel turning tasks. What does tolerance class M mean for setup? Tolerance class M indicates a standardised dimensional accuracy for reliable seating in tool holders and predictable repeatability when changing inserts. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160404-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the MP5 chipbreaker for high productivity and consistent chip control when turning steel; choose the TNMG160404-MP5 WPP20G insert by Walter Tools and order directly via Metav Werkzeuge or consult our specialists for process recommendations. TNMG160404-MP5 WPP20G indexable turning insert, for steel — Walter Tools The TNMG160404-MP5 WPP20G is an indexable turning insert designed for reliable steel machining, combining the Tiger·tec Gold coating with an MP5 chipbreaker for consistent chip formation and extended cutting performance. Tiger·tec Gold coated carbide grade WPP20G MP5 chipbreaker for controlled chip formation Triangle 60° insert, 0.4 mm corner radius High-performance steel turning with proven coating technology The coated carbide grade WPP20G from the Tiger·tec Gold series is engineered specifically for steel applications (material group P). The Tiger·tec Gold coating increases thermal stability and wear resistance, which translates into longer tool life and fewer interventions in the machining cycle. Combined with the MP5 chipbreaker, the insert promotes consistent chip segmentation and evacuation, reducing the risk of entanglement and improving surface quality. This results in higher effective cutting times and more predictable throughput in production environments where repeatability matters. Robust geometry for repeatable results and process stability The triangular 60° form with a 0.4 mm corner radius and a 0° negative rake delivers a balance of edge strength and cutting precision. The geometry and tolerance class M ensure repeatable seating and alignment in standard toolholders, minimising set-up variation and producing consistent part dimensions across batches. The thickness designation 04 and the standard TNMG designation indicate compatibility with common clamping systems, allowing straightforward integration into existing turning operations while maintaining high process security and reduced rework rates. Practical gains: productivity, surface finish and easier planning Using a coated, universally applicable grade like WPP20G supports productive machining across a broad range of steels, reducing the number of tool changes required for mixed production. Improved chip control from the MP5 breaker enhances operator safety and can shorten cycle times by preventing interruptions. The combination of coating technology and chipbreaker therefore contributes directly to cost-efficiency in the workshop and greater confidence in meeting surface finish and dimensional targets with fewer quality exceptions. For tailored cutting data, sample recommendations or to place an order for Walter Tools inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will advise on the best process settings for steel turning with Tiger·tec Gold Technical Data SKU: TNMG160404-MP5-WPP20G-WALTER Article designation: TNMG160404-MP5 WPP20G Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert size: 16 Plate form: Triangle 60° Corner radius: 0.4 mm Thickness designation: 04 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: MP5 Material application: steel (P) Execution: G FAQ What material range is suitable for this insert? The TNMG160404-MP5 WPP20G insert is specified for steel machining (material group P) and the WPP20G grade is optimised for the typical heat and chip behaviour of steels. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on the TNMG160404-MP5 promotes controlled chip formation and evacuation, improving surface finish and reducing interruptions caused by poor chip control. Can this insert be used for heavy roughing operations? The combination of a 0° negative rake and a 0.4 mm corner radius provides a robust cutting edge suitable for many general turning operations; consult Metav Werkzeuge for application-specific recommendations and clamping advice. Is the Tiger·tec Gold coating beneficial for productivity? Yes, the Tiger·tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, which supports longer cutting times and consistent productivity in steel turning. Which designation should be ordered for a matching insert? Order the TNMG160404-MP5 WPP20G designation to obtain the triangular 60° insert with MP5 chipbreaker and Tiger·tec Gold coating from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TNMG160404-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, a robust MP5 chipbreaker and a compact triangular geometry for steady, cost-effective steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. TNMG160404-MP5 WPP30G – indexable turning insert (for steel) by Walter Tools TNMG160404-MP5 WPP30G is a triangular 60° indexable turning insert designed for reliable steel machining, offering Tiger·tec Gold coating and an MP5 chipbreaker for controlled chip flow. Tiger·tec Gold coating WPP30G for durable edge MP5 chipbreaker for reliable chip control Triangle 60° form for versatile turning Corner radius 0.4 mm for precision finishes Consistent cutting performance for steel turning The coated carbide grade WPP30G from the Tiger·tec Gold family is formulated for machining steel (ISO group P) where heat and variable chip formation are typical. The combination of a wear-resistant coating and a stable substrate reduces flank and crater wear, which translates into a lower tool-change frequency and improved process reliability. With a triangular 60° shape and a corner radius 0.4 mm, the insert provides repeatable contact geometry that supports uniform surface quality and predictable tool life, enabling tighter production planning and reduced rework rates. Predictable productivity and simpler process control The MP5 chipbreaker is engineered to deliver consistent chip segmentation across a range of feed and cutting-depth combinations, improving evacuation in continuous and interrupted cuts. The insert’s negative clearance angle 0° (negative) increases edge robustness for moderate interruptions and heavy engagement, while the multiple cutting corners inherent to the triangular design extend the effective edge count per insert. These features contribute directly to higher productivity per index and a lower cost per component when machining mid-to-high strength steels under typical workshop conditions. Practical handling and application guidance for shop floors Marked as TNMG160404-MP5 WPP30G, the insert is compact (16 mm) and fits standard TNMG toolholders, allowing straightforward integration into existing turning toolsets. The thickness 4 mm ensures stiffness at the cutting edge, supporting stable cutting forces during finishing passes. For best results on steel workpieces, follow proven parameter windows for the grade and chipbreaker, and consider modest feeds with the 0.4 mm corner radius for improved surface finish. If uncertain about parameter selection or compatibility with a specific toolholder, technical advice and cutting-data sheets are available from Metav Werkzeuge to support setup and process optimisation. Contact Metav Werkzeuge for application-specific cutting data, stock information and tailored recommendations for Walter Tools Tiger·tec Gold inserts Technical Data SKU: TNMG160404-MP5-WPP30G-WALTER Designation: TNMG160404-MP5 WPP30G Product type: indexable turning insert (drehwendeschneidplatte) Series: Tiger·tec Gold Grade: WPP30G Facts Insert size: 16 mm Thickness: 4 mm Corner radius: 0.4 mm Cutting edge angle: 60° Clearance / rake: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Coating / material: WPP30G (Tiger·tec Gold, coated carbide) Material suitability: Steel (P) according to ISO 513 Shape: Triangle 60° Designation without grade: TNMG160404-MP5 FAQ What materials is the TNMG160404-MP5 WPP30G suitable for? The TNMG160404-MP5 WPP30G from Walter Tools is primarily intended for steel machining (ISO group P); the grade and coating are optimised for the heat and chip characteristics of unalloyed and alloyed steels. Which turning operations are best for this insert? This insert is suitable for general turning tasks including medium-duty roughing and finishing; the triangular geometry and MP5 chipbreaker allow flexibility between productivity and surface-quality priorities. How does the MP5 chipbreaker affect chip control and surface finish? The MP5 chipbreaker promotes repeatable chip segmentation and evacuation, reducing likelihood of chip entanglement and assisting in achieving consistent surface finishes when used with appropriate feeds and speeds. What does the designation TNMG160404-MP5 mean? The designation indicates a triangular 60° insert (TNMG) with a nominal size of 16 mm, thickness corresponding to 04, a corner radius 0.4 mm, and the MP5 chipbreaker; the appended WPP30G denotes the Tiger·tec Gold coated grade from Walter Tools. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG160404-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the MS3 chipbreaker for stable chip control and extended tool life; the robust 0° negative rake geometry ensures reliable performance in general steel turning. Order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and application advice. TNMG160404-MS3 WPP20G indexable turning insert — Tiger·tec Gold, for steel | Walter Tools A TNMG160404-MS3 WPP20G triangular indexable insert designed for reliable medium-duty turning of steel in general machining environments Tiger·tec Gold coated carbide grade WPP20G Optimised MS3 chipbreaker for steady chips 60° triangular shape with 0.4 mm corner 0° negative rake for robust cutting performance Longer tool life through optimised coating and grade The combination of the Tiger·tec Gold coating and the WPP20G carbide grade delivers high wear resistance and consistent edge stability when machining steel. Coated carbide reduces flank wear during continuous and semi-continuous cuts, which translates into fewer indexings and longer service intervals. For operations where reproducible performance matters, the coated substrate helps maintain cutting parameters over longer runs, improving process reliability and lowering overall tooling consumption. Consistent chip control and improved surface quality The integrated MS3 chipbreaker is tuned to create predictable chip forms when cutting typical steels, improving evacuation and reducing the risk of chip re-cutting. The 60° triangular geometry combined with a 0.4 mm corner radius provides a balance between strength and the ability to achieve acceptable surface finish on turning applications. This geometry supports stable cutting forces and simplifies toolpath planning in turning centres, making it easier to meet dimensional and surface requirements with fewer rejects. Robust geometry for versatile workshop use A 0° negative rake gives the insert a particularly strong cutting edge for interrupted cuts, higher feeds or tougher material batches, while the tolerance class M signals consistent manufacturing quality and repeatability from index to index. The insert’s design supports efficient set-up changes and straightforward indexation, which helps reduce downtime in mixed-production environments. As a product from Walter Tools, the insert is aimed at delivering dependable, industrial-grade performance for ordinary and demanding steel turning tasks. For hands-on application data or to secure delivery of this Walter Tools insert through Metav Werkzeuge, contact Metav Werkzeuge GmbH for tailored cutting parameters and order processing at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TNMG160404-MS3-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG160404-MS3 WPP20G Walter Tools Type: Drehwendeschneidplatte Brand: Walter Tools Grade: WPP20G Facts Corner radius: 0.4 mm Insert size: 16 Thickness: 04 Clearance angle: 0° (negativ) Tolerance class: M Special features Series: Tiger·tec Gold Chipbreaker: MS3 Shape: Triangle 60° Application: Steel (P) Substrate/coating: coated carbide FAQ What materials is this insert suitable for? The insert is designed primarily for machining steel; the WPP20G grade and Tiger·tec Gold coating are optimised for the thermal and chip-formation characteristics of steels. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker promotes controlled chip formation and evacuation, which enhances surface quality and reduces the risk of chip-related interruptions during turning. Is the geometry suitable for interrupted cuts? Yes, the 0° negative rake and triangular form deliver a robust cutting edge well suited to interrupted cuts and variable operating conditions. Can the tolerance class M be expected across production batches? Tolerance class M indicates consistent dimensional accuracy and repeatability between inserts, supporting predictable setup and part conformity. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer, Walter Tools.
TNMG160404-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the proven combination of durability, thermal stability and precise chip control to secure consistent production results. The insert reduces downtime through a stable cutting edge and optimised chip evacuation, supporting productive machining of demanding alloys. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160404-MS3 WSM01 — Triangle 60° indexable insert for stainless and superalloys — Walter Tools TNMG160404-MS3 WSM01 is a triangular indexable insert designed for heavy-duty turning of stainless steel and heat-resistant superalloys, featuring the MS3 chipbreaker and a robust Tiger-tec Silver grade. High heat resistance for superalloys Optimised MS3 chip control Triangle 60° with 0.4 mm corner Designed for stainless steel machining Reliable performance when machining difficult alloys The Tiger-tec Silver grade combined with the WSM01 cutting material provides high thermal stability and controlled wear progression, which directly contributes to longer tool life and fewer index changes. For shops machining stainless steel and nickel-based alloys, the insert’s composition and coating strategy help to reduce built-up edge and maintain a consistent cutting profile. This translates into predictable tool cycles and improved process throughput for batch and single-piece production alike. Geometry engineered for secure chip formation and surface finish The MS3 chipbreaker is configured to produce short, manageable chips under a range of cutting conditions, improving swarf control and reducing the risk of surface damage. The Triangle 60° form and 0.4 mm corner radius support stable cutting in shoulder and profile turning, while the negative rake angle (0°) enhances edge strength for interrupted cuts. As a result, operators benefit from superior surface quality and less rework, particularly on materials prone to work hardening. Practical gains: productivity, repeatability and tool life By combining a robust insert geometry with a heat-resistant grade, the system offers clear economic advantages: reduced tooling frequency and stable component tolerances. The insert’s tolerance class M ensures repeatable seating and accurate positioning in the toolholder, which supports consistent batch-to-batch quality. Where process reliability and minimised machine downtime are priorities, the design helps to keep cycle times stable and overall machining costs down. Simple selection and versatile application This indexable insert is specified for M and S workpiece groups according to ISO classification, making it suitable for stainless steel (M) and heat-resistant superalloys and titanium (S). The combination of the MS3 chipbreaker and the WSM01 grade gives flexibility across roughing and semi-finishing operations; selecting appropriate cutting parameters will balance tool life and surface integrity. The insert’s compact form factor is compatible with standard triangular toolholders, simplifying integration into existing tool setups. For tailored advice on Walter Tools inserts such as the TNMG160404-MS3 WSM01 and fast supply from Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will be pleased to recommend the ideal setup for the application. Technical Data Article number: TNMG160404-MS3-WSM01-WALTER Product name: TNMG160404-MS3 WSM01 Manufacturer: Walter Tools Facts Plate size: 16 Thickness code: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger-tec Silver Grade/sorte: WSM01 Chipbreaker: MS3 Plate form: Triangle 60° Material suitability: stainless steel (ISO M), superalloys/titanium (ISO S) Coating / substrate: coated cemented carbide (as per WSM01 description) FAQ What materials is this insert best suited for? The TNMG160404-MS3 WSM01 insert from Walter Tools is intended primarily for stainless steel (ISO M) and heat-resistant superalloys/titanium (ISO S), offering thermal stability and secure chip formation for these groups. Which chipbreaker does the insert use and what is its benefit? The insert features the MS3 chipbreaker, designed to produce short, controllable chips that improve swarf handling and protect the workpiece surface in both continuous and interrupted turning. Can the insert handle interrupted cuts and heavy engagement? With a negative rake (0°) and a durable grade, the TNMG160404-MS3 WSM01 provides enhanced edge strength suitable for interrupted cuts and heavier engagement compared with more fragile geometries. How does the tolerance class affect tool setup? Tolerance class M ensures precise seating and repeatable positioning in the toolholder, which supports consistent component tolerances and reduces the need for frequent readjustment during production runs. Is the insert compatible with standard triangular toolholders? Yes, the Triangle 60° form and standard dimensions of the TNMG160404-MS3 WSM01 allow use with common triangular insert toolholders for turning operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered marks are cited solely for explanation and identification. There is no commercial relationship between our company and these brands; the offered item is an original, factory-new article from the named manufacturer.
TNMG160404-MU5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, long tool life and consistent chip control for efficient turning of steel components. Order the TNMG160404-MU5 WPP10G directly via Metav Werkzeuge or consult our advisors for cutting-optimised recommendations. TNMG160404-MU5 TNMG160404-MU5 WPP10G for Stahl — Turning insert by Walter Tools TNMG160404-MU5 WPP10G is a triangular turning insert designed for productive steel machining, combining a Tiger‑tec Gold grade with an MU5 chipbreaker for controlled chip formation Tiger‑tec Gold coating for long tool life MU5 chipbreaker for stable chip control Triangle 60° form with 3 cutting edges Negative 0° rake for robust cutting Maximise productivity with a wear‑resistant grade The combination of the Tiger‑tec Gold coating and the WPP10G grade delivers outstanding wear resistance and consistent performance when machining Stahl. The coated carbide construction is optimised for the heat and chip formation typical of steel turning, which reduces flank wear and helps to maintain dimensional stability over longer production runs. This results in fewer indexings and lower tooling costs per part. Predictable chip control and surface quality The MU5 chipbreaker is designed to produce short, manageable chips in a wide range of cutting conditions, improving process security and reducing the risk of entanglement. The insert’s corner radius 0.4 mm and Triangle 60° geometry contribute to a stable cutting edge and reliable surface finish. These features support repeatable component quality and minimise secondary operations. Robust edge geometry for demanding operations With a 0° (negative) rake, this insert offers a robust cutting edge suitable for interrupted cuts and heavy engagement. The execution class G and tolerance class M indicate consistent manufacturing precision, aiding reproducible clamping and predictable cutting forces. The triangular shape provides three usable edges per insert, improving cost efficiency in series production. Practical compatibility and application scope Identified for material group P, the grade is suitable for unalloyed and alloyed Stahl types commonly encountered in engineering and general machining. The insert’s size code (16) and thickness code (04) match standard toolholder interfaces for TNMG formats, enabling straightforward integration into existing turning setups. As part of the Tiger‑tec Gold family, the insert balances durability and versatility for mixed production runs. For tailored advice on using the Walter Tools TNMG160404-MU5 WPP10G in specific turning applications, contact Metav Werkzeuge for technical consultation and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TNMG160404-MU5-WPP10G-WALTER Designation: TNMG160404-MU5 Grade: WPP10G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Plate form: Triangle 60° Inscribed circle / size: 16 Thickness code: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MU5 Execution: G Coating/construct: Coated carbide (Tiger‑tec Gold) Material application: P → Stahl Intended use: Turning / indexable insert FAQ What materials is this insert designed for? The TNMG160404-MU5 WPP10G turning insert is formulated for material group P and is optimised for machining Stahl, including common unalloyed and alloyed steels. How many cutting edges are available per insert? Due to the triangular 60° form, the insert provides three usable cutting edges before replacement or re-indexing is required. What benefits does the Tiger‑tec Gold grade offer in daily production? The Tiger‑tec Gold grade enhances wear resistance and edge stability in steel turning, leading to longer tool life and more consistent part quality under varying cutting conditions. Is the MU5 chipbreaker suitable for interrupted cuts? Yes, the MU5 chipbreaker produces controlled, short chips and the insert’s 0° (negative) rake offers a robust edge suitable for interrupted or heavy cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names are used here exclusively for explanation; there is no affiliation between our company and the mentioned brands. The offered item is original and factory-new.
TNMG160404-MU5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, dependable MU5 chip control and a compact 60° triangular form for efficient steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160404-MU5 WPP20G — Indexable turning insert, Tiger‑tec Gold coating, for Steel (Walter Tools) The TNMG160404-MU5 WPP20G is a triangular indexable turning insert engineered for general steel machining, offering robust wear resistance and steady chip formation in interrupted and continuous cuts. Tiger‑tec Gold coating for improved tool life MU5 chipbreaker for consistent chip control Triangle 60° insert with 0.4 mm corner radius Optimised for steel machining (ISO P) Improved productivity through coated carbide technology The Tiger‑tec Gold coating and coated carbide substrate deliver a balance of wear resistance and toughness that reduces tool changes and keeps production running. The coating technology is designed to withstand the thermal and mechanical loads typical of steel turning, which translates into longer usable life per index and fewer interruptions on the shop floor. This results in measurable efficiency gains and lower cost per part when machining ISO P materials. Precise chip formation and stable cutting behaviour Equipped with the MU5 chipbreaker and a 0° negative rake, this insert promotes controlled chip breaking and a steady cutting edge under varying cutting conditions. The chipbreaker geometry helps to guide chips away from the cutting zone, reducing the risk of entanglement in long or thin swarf. The 0° negative rake contributes to a more robust edge, particularly useful for interrupted cuts or unstable setups, while the 0.4 mm corner radius aids edge strength without compromising surface finish. Clear application focus and process reliability Designed specifically for machining steel (ISO P), the insert is part of the Tiger‑tec Gold family and offers consistent performance across a broad range of unalloyed and alloyed steels. The triangular 60° form provides three usable cutting edges per index, supporting economical usage and quick index changes. For workshops seeking predictable, repeatable results and reduced setup variability, this indexable insert supports stable tool life and straightforward tool management. For tailored machining recommendations with Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for expert advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMG160404-MU5-WPP20G-WALTER Article designation: TNMG160404-MU5 WPP20G Manufacturer: Walter Tools Facts Insert shape: Triangle 60° Corner radius: 0.4 mm Rake angle: 0° (negative) Size designation: 16 Thickness code: 04 Chipbreaker: MU5 Special features Coating: Tiger‑tec Gold (coated carbide) Grade / sort: WPP20G Tolerance class: M Intended application: Steel (ISO P) Series: Tiger‑tec Gold FAQ What materials is this insert suited for? The TNMG160404-MU5 WPP20G is intended for machining steel (ISO P), optimised for the heat and chip characteristics of unalloyed and alloyed steels. What benefit does the MU5 chipbreaker provide? The MU5 chipbreaker promotes controlled chip formation and reliable evacuation, which improves machining stability and reduces the risk of swarf issues in turning operations. How does the 0° negative rake influence cutting behaviour? A 0° negative rake offers a robust cutting edge that withstands heavier loads and interrupted cuts, enhancing tool durability and process reliability. Why is the 0.4 mm corner radius important? A 0.4 mm corner radius balances edge strength and surface finish: it reinforces the cutting edge for longer life while maintaining acceptable part surface quality. Is this insert part of a recognised coating family? Yes, the insert uses the Tiger‑tec Gold coating family, providing enhanced wear resistance and consistent performance in steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
TNMG160404-MU5 WSM20S MU5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a precise 0.4 mm corner radius and MU5 chip control to secure consistent machining performance on stainless steel and high-temperature alloys. Order the TNMG160404-MU5 WSM20S directly via Metav Werkzeuge or consult our advisers for cutting data and delivery options. TNMG160404-MU5 WSM20S indexable turning insert — Triangle 60°, 0.4 mm corner radius, Walter Tools A TNMG160404-MU5 WSM20S indexable turning insert engineered for reliable chip control and extended tool life when machining stainless steel and heat-resistant superalloys in demanding turning operations Tiger·tec Silver coating for heat resistance Stable cutting edge in stainless steel MU5 chipbreaker for consistent chip control Triangular 60° form for versatile turning Higher productivity when machining stainless steel and superalloys The coated WSM20S grade from the Tiger·tec Silver family is developed for materials that generate heat and tend to form long or sticky chips. With a defined corner radius of 0.4 mm, a negative 0° rake angle and the MU5 chipbreaker geometry, the insert promotes stable chip formation and helps avoid built-up edge; this reduces rework and improves process reliability. The combination of coating technology and substrate hardness extends cutting edge life under thermal and mechanical load, which directly contributes to measurable increases in machining throughput and lower tool consumption. Consistent surface finish and predictable tool life for turning processes A precise tolerance class M and the triangular 60° insert form make this insert suitable for a range of turning tasks, from light finishing to more demanding profiles. The MU5 chip control geometry is designed to subdivide and evacuate chips efficiently, which supports consistent surface quality on the workpiece and reduces downtime for manual chip management. For engineers and production planners, this means fewer interruptions and a more predictable replacement interval for indexable inserts, improving overall shop-floor efficiency and process planning. Simple integration into existing toolchains and process support The geometrical data and coating characteristics of this insert allow straightforward adaptation into standard toolholders and tool programmes. As the grade targets stainless steel and heat-resistant alloys, recommended cutting speeds and feeds differ from those for general steels; Metav Werkzeuge can supply tested cutting data and set-up recommendations tailored to the intended application. This reduces trial-and-error at the machine and helps reach the expected component tolerances faster, while maintaining reproducible results across production batches. For tailored cutting data, stock checks and fast technical advice on Walter Tools TNMG160404-MU5 WSM20S, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and order options Technical data Article number: TNMG160404-MU5-WSM20S-WALTER ISO designation: TNMG160404-MU5 WSM20S Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Core data Size / inscribed circle: 16 Corner radius: 0.4 mm Thickness code: 04 Rake angle: 0° (negative) Tolerance class: M Insert shape: Triangle 60° Chipbreaker: MU5 Special features Coating: Tiger·tec Silver Material suitability: S / M (superalloys, stainless steel) Execution: G Stable chip control for difficult-to-machine materials Designed for productive turning operations FAQ Which materials are best suited to this insert? The TNMG160404-MU5 WSM20S is primarily designed for stainless steel and high-temperature superalloys (material groups M and S), where heat resistance and edge stability are critical. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases thermal resistance and wear protection, supporting longer edge life and stable performance in operations with elevated cutting temperatures. What is the benefit of the MU5 chipbreaker on this insert? The MU5 chipbreaker promotes controlled chip segmentation and evacuation, reducing the risk of entanglement and improving surface finish during turning. Is this insert compatible with standard TNMG toolholders? The insert follows the TNMG160404 ISO form and fits holders designed for TNMG inserts with triangular 60° geometry; ensure correct seat and clamping for optimal performance. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius balances edge strength and surface quality: it supports a robust cutting edge for interrupted cuts while still allowing fine surface results in finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation; there is no affiliation between our company and the brands cited. The offered article is an original, factory-new product from the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com