TNMG220408-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP20G grade for consistent, economical turning of steel components; the MS3 chipbreaker and 0.8 mm corner radius ensure stable chip control and repeatable surface quality. Order directly via Metav Werkzeuge or consult our specialists for machining parameter support. TNMG220408-MS3 WPP20G — Triangular indexable turning insert, Tiger·tec Gold (Walter Tools) A TNMG220408-MS3 WPP20G insert designed for robust external turning of steel, offering controlled chip formation and extended tool life in medium to high-volume turning applications Tiger·tec Gold coating for extended tool life WPP20G grade optimised for steel Triangle 60° insert with 0.8 mm corner radius MS3 chipbreaker for dependable chip control Consistent performance for steel turning operations The combination of the WPP20G grade and the Tiger·tec Gold coating delivers a balance of wear resistance and toughness tailored to steel machining (material group P). This results in predictable tool life and fewer tool changes, which directly reduces downtime and increases throughput. The insert’s negative 0° rake geometry stabilises cutting forces during interrupted cuts, while the 0.8 mm corner radius supports reliable edge strength for roughing and medium finishing passes. By specifying this grade, production planners can expect repeatable results across batches, improving process planning and costing. Reliable chip control and surface finish with MS3 geometry The MS3 chipbreaker is designed to form short, controllable chips when machining steels, reducing the risk of entanglement and improving evacuation in automated turning cells. Better chip control translates into less secondary handling and fewer surface defects, which helps to maintain consistent surface quality and reduces rework. The triangular 60° shape delivers three cutting edges per indexable insert, supporting economical edge usage and simple indexing procedures in systematic tool change routines. Process security, repeatability and productivity gains Built for everyday production environments, this insert supports high process security through stable edge behaviour and temperature-resistant coating technology. The Tiger·tec Gold system offers thermal and mechanical load resistance, enabling higher cutting parameters where the machine and workholding permit, and therefore a potential increase in metal removal rates. The modest insert thickness and standard geometries allow compatibility with a wide range of toolholders, simplifying tool inventory management and promoting faster set-ups across different turning machines. Practical benefits for workshop and production planning Using this insert contributes to lower operating costs by extending edge life and reducing the frequency of insert changes. Fewer tool interventions mean more productive spindle time and improved OEE figures. In addition, the straightforward chip control and stable cutting behaviour reduce the need for specialist operator intervention, supporting training efficiency and consistent output quality in both manual and automated turning operations. Discuss machining parameters and order support with Metav Werkzeuge to optimise results with the Tiger·tec Gold WPP20G insert and adapt cutting data to the application Technical data Article number: TNMG220408-MS3-WPP20G-WALTER Designation: TNMG220408-MS3 ISO designation: TNMG220408-MS3 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert size: 22 Thickness: 04 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: MS3 Shape: Triangle 60° Material application: Steel (P) Grade family: coated cemented carbide FAQ What materials is this insert intended for? The TNMG220408-MS3 WPP20G insert is optimised for steel (material group P) and is designed to handle the heat and chip behaviour typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating enhances wear resistance and thermal stability, enabling higher cutting speeds and longer edge life with improved process security when using the WPP20G grade. Which chipbreaker should be selected for reliable evacuation? The MS3 chipbreaker integrated in this insert provides controlled short-chip formation for turning steels, improving chip evacuation in both manual and automated operations. What does the 0° negative rake mean in practice? A 0° (negative) rake increases edge robustness and resistance to impact, which is advantageous for interrupted cuts or roughing passes where stability and tool life are priorities. Is this insert compatible with standard TNMG toolholders? The insert follows the TNMG geometry and fits standard TNMG toolholders; ensure correct clamping and seating per the toolholder manufacturer’s instructions for optimal performance. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
TNMG220408-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and targeted chip control for efficient turning of tough alloys; the coated carbide grade and MS3 chipbreaker ensure stable edges and consistent results. Order the inserts via Metav Werkzeuge or consult the team for application-specific recommendations. TNMG220408-MS3 WSM01 turning indexable insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys by Walter Tools The TNMG220408-MS3 WSM01 is a triangular 60° turning indexable insert designed for robust performance in demanding applications, especially machining of rostfreier Stahl and heat‑resistant superalloys. Tiger‑tec Silver coated carbide grade WSM01 Optimised MS3 chipbreaker for stable chips Triangle 60° form with 0.8 mm corner radius Suitable for rostfreier Stahl and heat‑resistant alloys Increased process reliability for difficult‑to‑machine materials The combination of Tiger‑tec Silver coating and the WSM01 coated carbide grade provides a durable cutting edge and improved wear resistance under thermal stress. The MS3 chipbreaker is engineered for effective chip control when cutting materials that tend to form long, adhesive chips; this reduces the risk of edge build‑up and contributes to a more predictable cutting process. A negative 0° rake angle enhances insert strength and stability during interrupted cuts, which in turn supports consistent cycle times and less unplanned tool change‑overs—advantages that directly improve shopfloor efficiency. Consistent surface quality and repeatable tool life The triangular 60° geometry with a 0.8 mm corner radius offers a balance between strength and edge definition, making the insert well suited for a range of turning operations where both robustness and finish matter. The insert’s 22 size provides a stable platform for heavy engagement while the coated carbide substrate helps maintain a consistent edge over multiple passes. For users less familiar with indexable‑insert terminology: the corner radius influences the achievable surface finish and edge strength, while the chipbreaker determines how chips form and evacuate—both are critical to getting repeatable results in rostfreier Stahl and nickel‑based alloys. Application guidance and small‑lot flexibility This indexable insert is intended for turning operations on rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). Use the MS3 chip geometry for general turning where moderate to heavy chip volumes are expected; select appropriate cutting parameters to balance tool life and productivity. For new setups or when switching workpiece material, consult the technical advisors at Metav Werkzeuge to fine‑tune speeds and feeds—the right parameter set will maximise the benefits of the Tiger‑tec Silver coating and the stable WSM01 grade while protecting the integrity of the cutting edge. Discuss the machining requirements with Metav Werkzeuge to specify the optimal TNMG220408‑MS3 WSM01 inserts for rostfreier Stahl and superalloys — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: TNMG220408-MS3-WSM01-WALTER Product type: Turning indexable insert Designation: TNMG220408-MS3 Facts Shape: Triangle 60° Corner radius: 0.8 mm Insert size: 22 Free angle: 0° (negativ) Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MS3 Applicability: S / M (heat‑resistant alloys / rostfreier Stahl) Execution: G FAQ Which materials are best machined with this insert? The TNMG220408‑MS3 WSM01 insert is optimised for rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), providing stable cutting performance in these difficult materials. What benefit does the MS3 chipbreaker provide? The MS3 chipbreaker promotes controlled chip formation and evacuation, reducing build‑up and supporting consistent surface quality when machining sticky or gummy materials. How does the 0° negative free angle affect cutting? A 0° (negative) free angle increases cutting edge strength and resistance to mechanical shock, making the insert better suited to interrupted cuts and heavy engagement applications. How many cutting edges are available per insert and what does the corner radius mean? The triangular 60° insert provides three usable cutting edges; the 0.8 mm corner radius balances edge robustness and achievable surface finish for repeatable turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer, Walter Tools.
TNMG220408-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM10S grade for stable cutting-edge performance when machining difficult materials; the MS3 chipbreaker and triangular geometry ensure reliable chip control and economical tool life. Order directly via Metav Werkzeuge or request expert consultation for process optimisation. TNMG220408-MS3 WSM10S indexable turning insert — Walter Tools, Tiger·tec Silver coating, MS3 chipbreaker A TNMG220408-MS3 WSM10S indexable turning insert designed for machinability of rostfreier Stahl and heat-resistant superalloys, offering a negative rake and a triangular 60° form for versatile turning applications Tiger·tec Silver coating for thermal resistance Grade WSM10S for rostfreier Stahl and superalloys Triangular 60° insert with 0.8 mm corner radius MS3 chipbreaker for controlled chip formation High-temperature stability and consistent chip control The combination of the Tiger·tec Silver coating and the WSM10S grade provides a high degree of thermal resistance and a stable cutting edge, which is essential when machining rostfreier Stahl and high-temperature alloys. The MS3 chipbreaker is engineered to promote a predictable chip form and reduce the risk of built-up edge, while the 0° (negative) rake improves edge support under heavy loads. These characteristics translate into fewer interruptions for edge dressing, more consistent surface quality and a measurable increase in process reliability during continuous production runs. Geometry that reduces downtime and extends economic life The triangular 60° shape with a 0.8 mm corner radius and size 22 gives three usable cutting edges per insert and supports both versatile turning strategies and simplified tool management. The insert’s indexable design minimises machine downtime: when one edge wears, the insert is rotated rather than the whole tool replaced. The modest plate thickness 04 balances rigidity and accessibility in confined toolholders, helping to maintain tool life and reduce total machining cost per part. For workshops seeking predictable component tolerances, this geometry contributes to repeatable results and lower secondary operations. Suitable applications and production benefits Engineered for the demands of ISO material groups M and S, the insert excels in the machining of rostfreier Stahl and heat-resistant superalloys where heat accumulation and work-hardening present challenges. The cut‑edge stability and optimised chip control support both semi-finish and heavy turning tasks, producing reliable surface quality and reducing scrap rates. As part of a production-oriented tooling concept, this indexable insert from Walter Tools helps maintain throughput and supports consistent part quality — an important factor for serial manufacture and quality-conscious workshops. For high-process reliability with Walter Tools’ Tiger·tec Silver technology, contact Metav Werkzeuge for tailored advice and supply coordination. Technical data Article number: TNMG220408-MS3-WSM10S-WALTER SKU: TNMG220408-MS3-WSM10S-WALTER Designation (ISO): TNMG220408-MS3 WSM10S Manufacturer: Walter Tools Product type: Indexable turning insert Facts Shape: Triangle 60° Size: 22 Corner radius: 0.8 mm Rake angle: 0° (negative) Plate thickness: 04 Tolerance class: M Special features Grade: WSM10S Series: Tiger·tec Silver Chipbreaker: MS3 Material groups: S / M Suitable for: rostfreier Stahl FAQ Which materials is this insert intended for? The TNMG220408-MS3 WSM10S indexable turning insert from Walter Tools is designed for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), providing improved heat resistance and edge stability in demanding cuts. What benefit does the MS3 chipbreaker provide? The MS3 chipbreaker controls chip formation for consistent evacuation and reduced risk of entanglement; in combination with the Tiger·tec Silver grade it supports reproducible machining and safer chip handling. How does the Tiger·tec Silver coating affect performance? Tiger·tec Silver enhances thermal resistance and wear behaviour, allowing the insert to retain a stable cutting edge longer during high-temperature operations, which contributes to longer tool life and steady surface quality. How many cutting edges are available per insert? The triangular 60° form provides three cutting edges per insert; the geometry and indexable design enable quick rotation to a fresh edge, improving uptime and reducing tooling costs. Is the insert suitable for both roughing and finishing? The insert’s combination of stable edge support and controlled chip formation makes it adaptable for a range of turning tasks; depending on the chosen corner radius and cutting parameters, it can be used for robust roughing as well as finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TNMG220408-RM5 WMP20G RM5 Wendeplatten - Walter Tools
Die Kombination aus stabiler Schneidkante durch die Tiger·tec Gold‑Beschichtung und dem RM5‑Spanformer sorgt für zuverlässige Zerspanung rostfreier Materialien bei mittleren bis robusten Einsatzbedingungen. Profitieren von guter Standzeit und sicherer Spanbildung für gleichmässige Oberflächen – direkt bestellbar über Metav Werkzeuge oder Rückfrage bei den technischen Beratern. TNMG220408-RM5 WMP20G — Dreieckige Wendeschneidplatte, Tiger·tec Gold, für rostfreier Stahl — Walter Tools The TNMG220408-RM5 WMP20G is a triangular indexable insert designed for turning operations in rostfreier Stahl under moderate to robust conditions, offering advanced coating and a purpose‑built chipformer for consistent performance. Tiger·tec Gold coating for high wear resistance RM5 chipformer optimised for rostfreier Stahl 60° triangular shape with 0.8 mm corner radius Negative rake (0°) for robust turning Consistent cutting performance where process stability counts This indexable insert delivers reliable cutting performance thanks to the Tiger·tec Gold coating combined with a coated cemented carbide substrate. The result is improved wear resistance and reproducible edge life, which reduces the frequency of tool changes and contributes to steady cycle times on the shop floor. The RM5 chipformer is tailored to the challenging chip behaviour of rostfreier Stahl, promoting controlled chips and lowering the risk of built‑up edge. For production environments that prioritise predictability and minimal rework, the insert increases operational uptime and supports repeatable surface quality. Improved productivity through secure chip control and robust geometry With a 60° triangular profile and a 0.8 mm corner radius, the geometry provides a balance between strength and versatility for diverse turning tasks. The negative rake (0°) enhances cutting edge stability when facing interrupted cuts or heavier feed rates, so operators can push productivity without compromising component integrity. The optimised chip control reduces manual chip handling and the associated downtimes, leading to measurable improvements in throughput. Technical teams benefit from clearer process windows and simplified machining parameters, enabling quicker setup and consistent results. Clear specification and straightforward integration into production The insert is specified as a turning grade for rostfreie Werkstoffe with the designation showing exact geometry for machine programming and tool management. Its nominal size and thickness facilitate replacement planning within existing tool holders that accept the TNMG form factor. The WMP20G grade is intended for medium to robust conditions in rostfreier Stahl, offering a dependable combination of edge stability and abrasion resistance. Maintenance schedules can be standardised around the predictable wear behaviour, and tooling inventories simplified by adopting this grade where stainless machining is frequent. Contact Metav Werkzeuge today to discuss application parameters or to arrange sample testing with the TNMG220408-RM5 WMP20G insert and receive tailored machining recommendations from our specialists. Technical Data Article number: TNMG220408-RM5-WMP20G-WALTER Designation: TNMG220408-RM5 WMP20G Series/sort: Tiger-tec Gold / WMP20G Product type: Triangular indexable insert (turning) Manufacturer: Walter Tools Data Corner radius: 0.8 mm Inscribed circle / size: 22 mm Thickness: 4 mm Free angle: 0° (negative) Chipformer: RM5 Special features Coating technology: Tiger·tec Gold Substrate: Coated cemented carbide Target material group: rostfreier Stahl Typical use: Moderate to robust turning conditions FAQ What materials is this insert suitable for? The TNMG220408-RM5 WMP20G insert is designed primarily for machining rostfreier Stahl, with the grade and chipformer tuned to handle the toughness and heat characteristics of these alloys. How does the RM5 chipformer affect machining of stainless steels? The RM5 chipformer promotes secure chip formation and evacuation when cutting rostfreier Stahl, reducing built‑up edge and helping to maintain consistent surface finish during longer tool life. Is the insert compatible with standard TNMG tool holders? Yes, the TNMG220408-RM5 WMP20G follows the TNMG form factor and fits holders that accept TNMG inserts; confirmation of holder seat and clamping geometry is recommended before use. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and edge stability on demanding rostfreier Stahl applications, resulting in longer tool life and more predictable machining cycles. Which cutting conditions are recommended as a starting point? Begin with conservative feeds and speeds appropriate for rostfreier Stahl, then adjust to the specific alloy and setup; the TNMG220408-RM5 WMP20G is suitable for both moderate and more robust cutting once parameters are dialled in. Hersteller: Walter Tools (Walter AG), Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220408-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide, proven chip control and a robust corner radius for consistent performance in stainless-steel turning applications; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG220408-RM5 WMP20S indexable turning insert — Tiger·tec Silver for stainless steel by Walter Tools A TNMG220408-RM5 WMP20S indexable turning insert designed for machining stainless steel under medium to robust cutting conditions, combining a Tiger·tec Silver coating with an RM5 chipbreaker for stable cutting performance Tiger·tec Silver coated grade WMP20S Optimised RM5 chipbreaker for stainless steels Triangle 60° shape with 0.8 mm corner radius Stable chip formation for reliable production The combination of the Tiger·tec Silver coating and the WMP20S carbide grade produces stable chip formation when turning stainless steels, which are prone to built-up edge and material adhesion. This results in reduced risk of unexpected tool failure and more consistent cycle times. The coated substrate supports higher thermal resistance than uncoated grades, so cutting edges maintain geometry for longer during interrupted or continuous cuts. As a result, component quality is more reproducible and machine uptime improves. Geometry engineered for surface quality and edge strength The triangular 60° form paired with a 0.8 mm corner radius balances finish and edge robustness. The negative 0° (negative) relief angle increases corner strength and is suited to heavier engagement or interrupted cuts, while the RM5 chipbreaker promotes controlled chip segmentation to protect both workpiece surface and tool edge. This geometry simplifies insert indexing and repeatability in clamping, giving repeatable positional accuracy and reliable surface finish without sacrificing edge stability. Productivity gains through predictable tool life A coated carbide construction and the Tiger·tec Silver technology provide enhanced wear resistance and process security, meaning fewer insert changes and lower tool-handling time. The grade is specified for stainless steel applications and is optimised for mid to demanding conditions, enabling longer tool life under practical shop-floor conditions. Together these characteristics support higher productivity, reduced process variation and a more economical machining cycle when integrated into standard TNMG toolholders. Contact Metav Werkzeuge for application-specific recommendations and to purchase original Walter Tools inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TNMG220408-RM5-WMP20S-WALTER Designation: TNMG220408-RM5 WMP20S Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Facts Insert size / inscribed circle: 22 Thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Triangle 60° Chipbreaker: RM5 Tolerance class: M Special features Coating: Tiger·tec Silver Substrate: coated carbide Grade suited for: stainless steel (M) Sort description: coated carbide grade for medium to robust conditions Application focus: turning of stainless-steel components FAQ Which materials is this insert designed to machine? The TNMG220408-RM5 WMP20S by Walter Tools is specified for stainless steel (ISO group M) and performs under medium to robust cutting conditions. What effect does the 0.8 mm corner radius have on performance? A 0.8 mm corner radius increases edge strength for heavier engagement and helps maintain surface finish, while still allowing reasonable cutting forces for typical turning operations with the RM5 chipbreaker. How does the RM5 chipbreaker influence chip control? The RM5 chipbreaker promotes controlled segmentation of chips when machining tough, adhesive stainless steels, aiding evacuation and reducing the likelihood of built-up edge and surface damage. Is the insert compatible with standard TNMG toolholders? Yes — the ISO designation TNMG220408 corresponds to standard TNMG indexable turning insert holders, enabling straightforward integration into existing tool systems. Does the Tiger·tec Silver coating improve tool life? The Tiger·tec Silver coating enhances thermal and wear resistance compared with uncoated substrates, supporting improved tool life and process security in demanding stainless-steel turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, brand-new goods of the manufacturer (Walter Tools).
TNMG220408-RM5 WMP30G RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and a robust negative rake geometry for consistent turning of stainless steels; order the inserts directly via Metav Werkzeuge or ask the consultants for cutting data and batch availability. TNMG220408-RM5 WMP30G indexable turning insert, Tiger‑tec Gold, for stainless steels — Walter Tools TNMG220408-RM5 WMP30G is a triangular indexable turning insert designed for medium to robust machining of stainless steels, combining a wear‑resistant coating and a chipbreaker tailored to secure chip formation. Tiger‑tec Gold coating for stable cutting edges Optimised RM5 chipbreaker for secure chip control 0° negative rake for robust cutting conditions Triangular 60° form with 0.8 mm corner radius Consistent performance for demanding stainless‑steel turning The TNMG220408-RM5 WMP30G insert pairs Tiger‑tec Gold technology with a coated carbide substrate to deliver improved wear resistance under the high temperatures typical of machining stainless steels. The coating reduces adhesive built‑up on the cutting edge and helps maintain a stable cutting edge over longer tool life, which in turn supports repeatable component tolerances and fewer interruptions in production. For operations where thermal load and material ductility cause smearing or edge build‑up, this insert offers a measurable uplift in process reliability. Secure chip control and edge strength that protect cycle times The integrated RM5 chipbreaker has been developed to control chip form during middle to heavy cuts, reducing the risk of tangled chips and supporting safe evacuation in turning operations. Combined with a 0° negative rake, the geometry favours a stronger cutting edge and higher mechanical stability when facing interrupted cuts or hard inclusions. The 0.8 mm corner radius provides additional edge reinforcement, which improves resistance to chipping and extends usable life under robust conditions — a practical advantage when aiming to keep cycle times tight and scrap rates low. Practical advantages for shop floor integration and set‑up The triangular 60° form gives three usable cutting edges per indexable insert, improving economy of use. The insert’s nominal size and thickness support standard toolholder configurations, simplifying inventory and changeover. Although designed for stainless steels, the substrate and chip control characteristics make it suitable in mixed‑material production lines where reliable edge integrity and predictable wear behaviour are priorities. When selecting insert grades or setting feeds and speeds, the combination of Tiger‑tec Gold and RM5 allows a balanced approach between cutting performance and tool‑life optimisation. How the coating and geometry translate into measurable benefits In practice, the Tiger‑tec Gold coating reduces adhesive wear and maintains micro‑edge integrity, which improves surface finish and dimensional repeatability. The RM5 chipbreaker promotes short, controllable chips that minimise entanglement and protect toolholders and workpiece surfaces. Together these features deliver higher first‑pass yields and lower rework. For engineers seeking process security and predictable tool replacement intervals, the insert’s construction supports consistent results across batch runs without complex cooling strategies. The Walter brand is globally recognised for high process safety and consistent tool performance; the Tiger‑tec Gold family addresses the specific challenges of machining austenitic and other stainless steels by combining a robust coating system with geometries designed for secure chip control and long tool life. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Contact Metav Werkzeuge for tailored supply, cutting data sheets and delivery options for Walter Tools Tiger‑tec Gold TNMG220408-RM5 WMP30G inserts Technical Data Article number: TNMG220408-RM5-WMP30G-WALTER Type designation: TNMG220408-RM5 WMP30G Series: Tiger‑tec Gold Brand: Walter Tools Core dimensions Form: triangular 60° Size: 22 Thickness: 04 Corner radius: 0.8 mm Free rake angle: 0° (negative) Materials & features Grade code: WMP30G Substrate/coating: coated carbide (Tiger‑tec Gold) Chipbreaker: RM5 Intended application: stainless steels (material group M) Designation: indexable turning insert FAQ What steels is this insert intended for? The TNMG220408-RM5 WMP30G insert is specified for stainless steels (material group M) and is engineered to manage the thermal and adhesive behaviour typical of these alloys. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes controllable chip forms and safer evacuation during turning; on the WMP30G grade it contributes to reduced build‑up and more consistent surface results. Is the 0° negative rake suitable for interrupted cuts? Yes, the negative rake geometry increases edge strength and mechanical robustness, making it appropriate for interrupted or heavy cutting conditions where edge protection is required. How many edges are available per insert and what is the corner radius? The triangular 60° shape provides three usable cutting edges per insert, each with a 0.8 mm corner radius to improve resistance to chipping. Where can cutting data and supply be obtained? Cutting data sheets and availability details for Walter Tools Tiger‑tec Gold inserts can be requested from Metav Werkzeuge; they provide application advice and batch supply information. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TNMG220408-RM5 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating, a robust RM5 chipbreaker and a 0.8 mm corner radius delivers stable cutting edges and high process security in demanding turning operations; benefit from improved productivity and predictable tool life. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TNMG220408-RM5 WSM10S triangle 60° turning insert – Walter Tools, for stainless steels and superalloys TNMG220408-RM5 WSM10S is a negative 0° relief triangle insert designed for reliable finishing and roughing in tough-to-machine materials Tiger·tec Silver coating for heat resistance Optimal for stainless steels and superalloys Triangle 60° form for versatile turning 0.8 mm corner radius for robust edges Stable chip control for demanding alloys This indexable insert features the RM5 chipbreaker and the Tiger·tec Silver coating, engineered to maintain consistent chip formation when machining stainless steels and superalloys. The combination reduces the tendency for built-up edge and minimises heat-induced edge wear, which in turn supports higher effective cutting parameters and lower scrap rates. For users seeking measurable gains in cycle time and reproducibility, the insert offers a clear performance advantage through improved process security and controlled material evacuation. Reliable edge life and reproducible results With a corner radius of 0.8 mm and a negative 0° relief angle, the geometry is balanced for both edge strength and surface finish. The coated carbide grade WSM10S is tailored to resist thermal and mechanical wear typical of heat-resistant alloys and stainless material groups, enabling longer intervals between tool changes. This leads to reduced machine downtime and more predictable planning for batch production runs, supporting efficient shop-floor scheduling and cost management. Versatile geometry that supports workshop productivity The Triangle 60° form allows access to multiple cutting edges per insert and is suitable for a range of turning tasks from profiling to light roughing, increasing tooling economy. The design makes insert indexing straightforward and reduces inventory complexity because one geometry can cover several applications. Combined with Walter Tools’ focus on stable cutting-edge behaviour, the insert supports consistent surface quality and repeatable dimensional control across serial production. For tailored recommendations, stock checks or cutting-parameter guidance for Walter Tools inserts contact Metav Werkzeuge for specialist advice by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge will advise on the optimal insert choice for the specific alloy and operation. Technical data Article number: TNMG220408-RM5-WSM10S-WALTER Designation: TNMG220408-RM5 WSM10S Series: Tiger-tec Silver Facts Shape: Triangle 60° Corner radius: 0.8 mm Relief angle: 0° (negative) Size: 22 Thickness code: 04 Special features Grade: WSM10S (coated carbide) Chipbreaker: RM5 Material applicability: stainless steels, heat-resistant superalloys and titanium Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The TNMG220408-RM5 WSM10S insert is designed for stainless steels and heat-resistant superalloys, offering thermal resistance and stable chip formation for these groups. How does the RM5 chipbreaker affect cutting performance? The RM5 chipbreaker promotes controlled chip formation and evacuation, which stabilises the cutting process and helps preserve the WSM10S coated edge under high thermal load. Can this insert be used for finishing as well as light roughing? Yes; the triangle 60° geometry and a 0.8 mm corner radius make the insert suitable for profiling and finishing tasks while still providing sufficient strength for light roughing. Is the grade compatible with titanium machining? The WSM10S grade is primarily optimised for stainless steels and superalloys; depending on the application geometry it can be applied to some titanium operations, but specific cutting data should be validated. How many cutting edges are available per insert? The triangular design provides multiple usable cutting edges, enhancing tool economy by allowing indexing to fresh edges as wear occurs. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TNMG220408-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust RM5 chipbreaker and a 0.8 mm corner radius for consistent edge life and secure machining of stainless steels and superalloys; order the insert directly via Metav Werkzeuge or contact the consultants for application support. TNMG220408-RM5 WSM20S indexable turning insert – for stainless steels and superalloys | Walter Tools The TNMG220408-RM5 WSM20S is an indexable turning insert engineered for demanding turning operations on stainless steels, heat-resistant superalloys and titanium, offering stable cutting edges and reliable chip control. Tiger·tec Silver coating for heat resistance Optimised RM5 chipbreaker for stable chips Triangle 60° insert with 0.8 mm corner radius Negative 0° rake for interrupted cuts Stable edges for high-temperature materials The coated carbide grade from the Tiger·tec Silver family delivers thermal resistance and wear protection that supports longer tool life when machining difficult materials. Thanks to the WSM20S specification and the robust coating technology, the insert maintains a steady cutting edge under elevated temperatures, reducing flank wear and the need for frequent index changes. This translates into fewer tool interventions and more predictable process windows for serial production. Predictable chip control and process security An RM5 chipbreaker designed for this geometry promotes consistent chip formation when facing the tough characteristics of superalloys and austenitic stainless steels. The controlled chips aid coolant flow and evacuation, lowering the risk of edge build-up and fluctuation in cutting forces. The result is enhanced process security, fewer surface defects and a reduction in unplanned rework in series machining environments. Geometry tuned for roughing and interrupted cuts The triangular 60° shape with a 0.8 mm corner radius and a negative 0° rake angle is well suited to robust turning tasks, including interrupted cuts and roughing passes. The combination of insert form and radius offers strength at the cutting edge, enabling higher feed rates and better resistance to mechanical shock. Where higher stability is required, this geometry supports effective engagement with the workpiece while preserving dimensional consistency. Clear selection guidance for workshop planners The insert is specified for material groups M and S (stainless steels and heat-resistant superalloys/titanium), making it a practical choice for mixed-production shops that run corrosion-resistant alloys alongside high-temperature materials. The coated carbide construction and tolerance class M ensure compatibility with industrial tool holders and predictable interchangeability. For process setup, select cutting parameters that prioritise edge stability and chip evacuation to exploit the insert’s strengths. For expert advice on selecting the right Walter Tools turning inserts for specific stainless steel or superalloy applications, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav Werkzeuge will provide application support and supply options. Technical data Article number: TNMG220408-RM5-WSM20S-WALTER Designation: TNMG220408-RM5 WSM20S Type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Insert size: 22 Plate thickness: 04 Corner radius: 0.8 mm Shape: triangle 60° Rake angle: 0° (negative) Special features Grade: WSM20S (coated carbide) Chipbreaker: RM5 Material suitability: stainless steels (M), superalloys / titanium (S) Tolerance class: M FAQ What materials is this insert suited for? The TNMG220408-RM5 WSM20S insert from Walter Tools is formulated for stainless steels (M) and heat-resistant superalloys and titanium (S), offering thermal stability and edge strength for these groups. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker produces controlled chips that improve evacuation and reduce edge build-up; when used with the WSM20S grade, it supports consistent surface quality and process stability. Which applications benefit most from this triangular insert? The triangle 60° shape with a 0.8 mm radius is ideal for roughing and interrupted-turning tasks where robust edge strength and mechanical stability are required. Is the coating technology important for performance? Yes — the Tiger·tec Silver coating on the WSM20S grade increases heat resistance and wear protection, extending edge life under elevated cutting temperatures. How should users select cutting parameters? Choose parameters that favour edge stability and chip control: moderate cutting speeds for stainless steels and higher heat-resistant alloys, with feeds adjusted to exploit the 0.8 mm corner radius and the RM5 chipbreaker. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Mark names and protected designations are used for explanation only. There is no affiliation between our company and the brands mentioned. The offered item is an original, factory‑new product of the manufacturer.
TNMG220408-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high process security, consistent surface finish and durable cutting performance for efficient machining of stainless steels and superalloys. Order the TNMG220408-RM5 WSM30S indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG220408-RM5 WSM30S – indexable turning insert with Tiger·tec Silver coating by Walter Tools (triangle 60°, negative 0°) A high-performance triangle insert designed for reliable turning in stainless steels and heat-resistant superalloys, combining a robust edge geometry with the Tiger·tec Silver coated carbide grade. Triangle 60° geometry for versatile turning Tiger·tec Silver coated carbide grade WSM30S RM5 chipbreaker for stable chip control 0.8 mm corner radius for robust edge integrity Achieve reliable cutting in tough materials with a heat-resistant grade The Tiger·tec Silver grade WSM30S is a coated carbide development aimed at machining demanding materials. Designed for ISO groups M (stainless steels) and S (superalloys and titanium), the grade emphasises heat resistance and stable chip formation. In practice this means fewer unscheduled tool changes and a more predictable tool life under elevated cutting temperatures. The specific coating structure reduces adhesion and improves wear resistance, enabling consistent performance during both roughing and light finishing operations. Geometry and chip control deliver consistent surface quality The triangular 60° form and the RM5 chipbreaker create a balance between cutting force distribution and chip evacuation. The insert’s 0.8 mm corner radius increases edge strength, reducing the risk of chipping in interrupted cuts, while the negative 0° rake supports a controlled cutting action on tougher workpiece materials. Together these elements help achieve a reproducible surface finish and dimensional stability, especially when machining long-running batches where repeatability matters. Practical benefits for workshop productivity and process security As an indexable insert, this type simplifies tool management and reduces regrinding complexity: one insert size fits standard TNMG toolholders and allows rapid index changes. The coating and substrate combination focused on tool life and heat tolerance decreases downtime and contributes to better cost-in-use figures over a production run. Where operators face build-up edge or thermal softening, the grade’s wear characteristics support continuous operation and reduce the incidence of rework. For purchasers seeking predictable machining of rostfreiem material and superalloys, the insert is a practical choice that supports productive, repeatable turning. Contact Metav Werkzeuge to discuss how the Walter Tools TNMG220408-RM5 WSM30S can be integrated into the current tool setup or to request tailored recommendations—eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: TNMG220408-RM5-WSM30S-WALTER Designation: TNMG220408-RM5 WSM30S Manufacturer: Walter Tools Type: Indexable turning insert Core measurements Inscribed circle / size: 22 mm Thickness: 4.0 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Special features and materials Series: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: RM5 Geometry: Triangle 60° Suitable for: stainless steels (ISO M) and superalloys/titanium (ISO S) FAQ What materials is this insert best suited for? The TNMG220408-RM5 WSM30S is optimised for stainless steels (ISO group M) and heat-resistant superalloys or titanium (ISO group S), offering wear resistance and stable chip control for these demanding materials. Which chipbreaking behaviour can be expected with RM5? The RM5 chipbreaker promotes compact and controllable chips in turning operations, improving evacuation and reducing the risk of entanglement, particularly when machining sticky or ductile materials. Is this insert compatible with standard TNMG toolholders? Yes, the designation corresponds to established TNMG dimensions and is compatible with toolholders designed for TNMG inserts of the same size and clamping style. How does the Tiger·tec Silver coating benefit production runs? The Tiger·tec Silver coating increases heat and wear resistance, which translates into longer tool life, fewer insert changes and improved process stability over extended cycles. What cutting edge does the 0.8 mm corner radius provide? A 0.8 mm corner radius delivers enhanced edge strength for interrupted cuts and contributes to consistent surface quality while maintaining reasonable cutting forces for stable turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
TNMG220408-RP5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated RP5 chipbreaker and a robust triangular geometry to improve process stability and tool life in steel turning; order the insert via Metav Werkzeuge or contact our consultants for application advice and availability TNMG220408-RP5 WPP10G turning insert by Walter Tools — Tiger·tec Gold, RP5 chipbreaker The TNMG220408-RP5 WPP10G is a triangular 60° turning insert designed for steady, reliable steel machining where predictable chip control and long tool life are priorities. Tiger·tec Gold coating for extended life RP5 chipbreaker optimised for steel Triangle 60° geometry for versatile applications 0° negative clearance for robust cutting Consistent performance for steel machining The Tiger·tec Gold grade WPP10G combines a coated carbide substrate with a process-orientated design to deliver consistent edge life when machining steel (P). The RP5 chipbreaker is tuned to create manageable, broken chips at typical cutting parameters for unalloyed and alloyed steels, reducing interruptions and easing swarf handling. This results in fewer tool changes and higher uptime on the machine, supporting continuous production runs with predictable outcomes. Durable coating and stable cutting edge reduce costs The insert’s Tiger·tec Gold coating improves resistance to abrasive wear and thermal loading compared with uncoated grades, which translates into extended operating life and more stable cutting-edge geometry over time. The choice of a coated grade minimises rework and unplanned downtime, yielding a verifiable improvement in tool economy for component series production. For operations seeking reproducible results, the combination of grade and geometry offers measurable savings through longer edge life and reduced handling. Geometry and edge form for reliable chip control A triangular 60° form with a 0.8 mm nose radius provides a balance between strength and finish capability, while the 0° (negative) relief enhances edge robustness under interrupted cuts and moderate depths of cut. The RP5 chipbreaker focuses chip formation specifically for steel applications, producing short, controllable chips across a range of feeds. For users less familiar with insert terminology, this means fewer tool-related stoppages and improved operator safety thanks to predictable swarf behaviour. Practical selection and integration into production This insert is supplied in the TNMG format and carries a tolerance class of M, making it suitable for standard toolholders and automated tool change systems that accept TNMG geometry. The WPP10G grade is positioned for universal steel machining tasks, offering a compromise between wear resistance and toughness for mixed-production environments. For integration advice or parameter recommendations, Metav Werkzeuge can provide cutting data and application support to match the insert to specific machine and workpiece conditions. Contact Metav Werkzeuge for personalised cutting data, availability and application advice on Walter Tools Tiger·tec Gold inserts to ensure optimal integration into production Technical Data SKU: TNMG220408-RP5-WPP10G-WALTER Designation: TNMG220408-RP5 Commercial name: TNMG220408-RP5 WPP10G Product type: Turning insert Manufacturer: Walter Tools Core specifications Insert shape: Triangle 60° Size designation: 22 Thickness designation: 04 Nose radius: 0.8 mm Relief/clearance angle: 0° (negative) Tolerance class: M Materials & features Grade/series: WPP10G, Tiger·tec Gold (coated carbide) Chipbreaker: RP5 Application group: Steel (P) according to ISO 513 Execution: G FAQ What materials is this insert suitable for? This insert is intended primarily for steel (P) machining; the WPP10G grade and RP5 chipbreaker are designed to handle typical steel heat generation and chip formation. What does the RP5 chipbreaker do? The RP5 chipbreaker on the TNMG220408-RP5 WPP10G helps form short, manageable chips during turning of steel, improving swarf control and reducing interruptions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coated grade provides enhanced wear resistance and thermal stability for longer edge life with fewer changes, which benefits continuous machining processes. What are the key geometric features to consider? The triangular 60° shape and 0.8 mm nose radius offer a balance of strength and surface finish; the 0° (negative) relief increases robustness for interrupted cuts. Is the TNMG220408-RP5 WPP10G suitable for standard toolholders? Yes, the TNMG form and M tolerance class make the insert compatible with standard TNMG toolholders used in most turning applications. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220408-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the RP5 chipbreaker to increase process stability and productivity in steel turning; the combination of universal wear resistance and a controlled chip form reduces downtime and scrap. Order the TNMG220408-RP5 WPP20G insert directly via Metav Werkzeuge or consult the Metav team for machining parameters and holder compatibility. TNMG220408-RP5 WPP20G turning indexable insert — Triangle 60°, 0.8 mm nose radius, for steel | Walter Tools TNMG220408-RP5 WPP20G is a coated turning insert designed for robust, high-productivity machining of steel components in industrial turning applications Tiger·tec Gold coated carbide Optimised RP5 chipbreaker for steel Triangle 60° form with 0.8 mm nose radius Productivity gains from a modern coating and grade The Tiger·tec Gold coating combined with the WPP20G grade provides a balance of wear resistance and toughness that suits a wide range of steel machining tasks. The coated carbide composition delivers consistent edge stability under typical steel cutting temperatures, which translates into longer tool life and fewer insert changes. The RP5 chipbreaker is engineered to produce predictable, segmented chips when turning ISO P materials, lowering the risk of entanglement and enhancing machine uptime. This results in measurable productivity improvements and a reduced overall machining cost per component. Reliable part quality through defined geometry The triangular 60° form and 0.8 mm corner radius preserve cutting-edge rigidity while offering a compromise between strength and finishing capability. The 0° (negative) rake geometry supports heavy roughing passes without premature edge failure and helps maintain a steady cutting behaviour in interrupted cuts. As a consequence, the toolholder–insert system achieves repeatable dimensional accuracy and improved surface finishes on turned shafts and profiles. For setups requiring consistent batch tolerance, the stable geometry of this insert reduces process variation and rework. Versatility and simple process integration for workshop use Designed primarily for machining steel (ISO P), the insert fits standard TNMG-type toolholders and is suitable for turning tasks from medium finishing to roughing where a robust edge is required. The insert’s universal character and the WPP20G grade make it appropriate for mixed-shop environments that need one grade covering multiple steel subgroups. Integration is straightforward: select a compatible clamping system, set cutting data according to workpiece grade and machine capability, and exploit the optimised chip control to maintain cycle reliability. For users seeking guidance on parameter selection, technical consultation is available to align cutting speeds and feeds with production goals. For high-process security with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and tailored machining advice: info@metav-werkzeuge.com — +49 2822 7131930 Technical Data SKU: TNMG220408-RP5-WPP20G-WALTER Designation: TNMG220408-RP5 WPP20G Product type: Turning indexable insert Facts Inscribed circle: 22 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Insert thickness code: 04 Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP5 Insert form: Triangle 60° Execution code: G Tolerance class: M Material application: Steel (ISO P) FAQ What materials is this insert suitable for? This insert is optimised for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are tuned for the typical heat and chip formation encountered when turning steel. Which chip control can be expected with the RP5 geometry? The RP5 chipbreaker on the TNMG220408-RP5 WPP20G produces short, controllable chips in a wide range of steel cutting conditions, reducing the risk of chip entanglement and improving process safety. Is the insert suitable for both roughing and finishing? Yes, the triangular 60° form with a 0.8 mm corner radius offers sufficient edge strength for roughing while still allowing acceptable surface quality for medium finishing operations. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances wear resistance and thermal barrier properties, resulting in more consistent edge life and better performance under elevated cutting temperatures typical of steel machining. Which holders are compatible with this TNMG insert? TNMG inserts, including the TNMG220408-RP5 WPP20G, are compatible with standard TNMG toolholders that accept 22 mm inscribed circle triangle inserts; proper clamping and seat condition are essential for repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new goods from the manufacturer.
TNMG220408-RP5 WPP30G G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the RP5 chipbreaker together with a 0.8 mm nose radius for efficient, consistent steel turning; request application advice or order directly via Metav Werkzeuge. TNMG220408-RP5 WPP30G triangle 60° turning insert, Tiger‑tec Gold coating — Walter Tools TNMG220408-RP5 WPP30G is a triangular turning insert engineered for productive machining of steel components, offering a negative 0° rake and a 0.8 mm corner radius for stable performance. Tiger‑tec Gold coating for long tool life RP5 chipbreaker for controlled chips Triangle 60° form for versatile turning Negative 0° rake for robust cutting Higher throughput for steel turning with proven coating technology The combination of Tiger‑tec Gold and a coated carbide substrate delivers a balance of wear resistance and toughness that benefits production environments machining steel. The designed coating system reduces flank wear and extends tool life, enabling fewer insert changes and more uninterrupted machining time. The insert geometry supports stable heat management during typical steel cutting cycles, which translates into more predictable process windows and consistent part quality. Controlled chip formation and surface integrity with RP5 The RP5 chipbreaker is optimised for typical steel chip shapes and evacuation, reducing secondary operations and minimising entanglement. A well-controlled chip flow decreases the risk of workpiece damage and supports improved surface quality without compromising cutting stability. The insert’s triangular 60° form, together with the 0.8 mm nose radius, achieves a compromise between fine surface finish and sufficient edge strength for medium to heavy cuts. Robust geometry for demanding turning tasks A negative 0° rake provides a mechanically stronger cutting edge where interrupted cuts or heavy depths of cut are required. The insert’s construction ensures reliable seating in standard toolholders while the specified tolerance class M supports consistent repeatability in production. These design choices favour shops prioritising process reliability and predictable consumable behaviour under varying load conditions. Compatibility, selection and application guidance The insert is intended for machining materials classified in group P (general steel grades) in accordance with ISO guidance. Selection of cutting data should consider material condition, machine rigidity and coolant usage; the Tiger‑tec Gold grade is suited to a broad range of steel alloys and cutting regimes. For integration into existing tool systems, the triangular shape and TNMG style make the insert compatible with widely used turning toolholders; recommended feeds and speeds vary with workpiece material and diameter. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts and to discuss optimal cutting parameters for specific steel grades — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: TNMG220408-RP5-WPP30G-WALTER SKU: TNMG220408-RP5-WPP30G-WALTER Product type: Drehwendeschneidplatte / turning insert Facts Shape: Triangle 60° Corner radius: 0.8 mm Inscribed circle / size: 22 mm Thickness: 4 mm Rake angle: 0° (negative) Tolerance class: M Special features Grade: WPP30G (Tiger‑tec Gold) Chipbreaker: RP5 Coating: Tiger‑tec Gold (coated carbide) Material application: Steel (ISO group P) Series: Tiger‑tec Gold FAQ Is this insert suitable for general steel turning? The TNMG220408-RP5 WPP30G is specifically designed for machining materials in ISO group P (steel), providing good resistance to the heat and chip formation typical of steel turning. What is the purpose of the RP5 chipbreaker? The RP5 chipbreaker promotes stable chip formation and evacuation during steel cuts, helping to protect the workpiece surface and reduce manual chip management. How does the 0.8 mm corner radius affect machining? A 0.8 mm nose radius improves edge strength and contributes to a balanced surface finish; it is suitable for medium to heavy cuts while still supporting acceptable finish quality. Can the insert handle interrupted cuts or heavy depths of cut? The negative 0° rake geometry strengthens the cutting edge, making the insert resilient under interrupted cutting and heavier engagement typical in robust turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The item offered is original, factory-new merchandise of the manufacturer.
TNMG220412-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, a dedicated WKK20S grade and an optimised MK5 chipbreaker to increase tool life and machining stability in cast‑iron turning; order via Metav Werkzeuge or consult our specialists for cutting data and delivery. TNMG220412-MK5 WKK20S turning insert — Walter Tools, Tiger‑tec Silver, for cast iron TNMG220412-MK5 WKK20S is a triangular indexable insert designed for robust turning of cast iron components in production environments Tiger‑tec Silver coating for long tool life Optimised MK5 chipbreaker for cast iron machining Triangle 60° geometry for versatile turning 1.2 mm corner radius for robust edge strength Greater uptime through a wear-resistant grade The WKK20S grade, integrated in the Tiger‑tec Silver coating system, is developed for the abrasive nature of cast iron and the short, breaking chip forms typical for these alloys. This combination improves tool life and reduces changeover frequency, which in turn lowers cost per component and increases net productivity. For users seeking predictable performance, the coated carbide substrate delivers consistent edge retention and reduced flank wear under intermittent cuts common in cast‑iron turning. Predictable cutting behaviour from defined geometry A triangle 60° insert with a 1.2 mm corner radius and 0° negative rake offers a balance between edge strength and accessibility for a range of turning tasks. The MK5 chipbreaker is engineered to produce controllable chips in grey and nodular cast iron, improving machine‑tool interaction and reducing the risk of workpiece surface damage. The triangular shape provides three usable cutting edges per index, enabling efficient use of each insert and predictable repeatability in serial production. Process security and shop‑floor relevance The TNMG220412‑MK5 WKK20S indexable insert is specified for industrial turning operations where stability and repeatable part quality are required. Execution class G and tolerance class M support consistent clamping and seating in standard toolholders. Practical benefits include reduced downtime from fewer insert changes, stable chip control with the MK5 geometry and straightforward grade selection for cast‑iron applications. Walter Tools' engineering focus on robust edge preparation and coating technology provides confidence for continuous production use. For application advice, cutting‑data recommendations or to source production‑proved Tiger‑tec Silver WKK20S inserts from Walter Tools, contact Metav Werkzeuge for expert consultation and prompt supply. Technical data SKU: TNMG220412-MK5-WKK20S-WALTER Designation: TNMG220412-MK5 WKK20S Manufacturer: Walter Tools Product type: Turning indexable insert Specs Series: Tiger‑tec Silver Grade: WKK20S Shape: Triangle 60° Size: 22 mm Thickness: 4 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Chipbreaker: MK5 Execution: G Tolerance class: M Applications & features Suitable for cast iron (K) Coated carbide grade for abrasive wear resistance Optimised for breaking chips and process stability Three cutting edges per insert for efficient indexing FAQ Is this insert suitable for all cast‑iron types? The WKK20S grade is formulated for a broad range of cast iron materials; the TNMG220412‑MK5 WKK20S insert handles typical grey and nodular cast irons with effective chip control provided by the MK5 chipbreaker. How does the MK5 chipbreaker improve machining? The MK5 geometry promotes short, controllable chips in cast‑iron turning, improving surface quality and reducing entanglement risks; this behaviour supports stable cycle times in serial production. What does the 0° negative rake mean in practice? A 0° negative rake increases edge strength and resistance to mechanical shock, which is advantageous when machining interrupted cuts or hard inclusions commonly found in cast components. How many usable edges does the insert provide? The triangular 60° shape yields three usable cutting edges per insert, enabling efficient indexing and predictable production costs per edge. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods from the manufacturer Walter Tools.
TNMG220412-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold performance and the WPP10G grade together with the proven MP3 chipbreaker to ensure stable chip control and long tool life in Stahl turning applications. Order genuine Walter Tools inserts via Metav Werkzeuge or contact our consultants for tailored cutting data and application advice. TNMG220412-MP3 WPP10G indexable turning insert, Tiger‑tec Gold, for Stahl — Walter Tools TNMG220412-MP3 WPP10G is a triangular 60° indexable turning insert designed for general-purpose to moderately heavy turning of Stahl, featuring a 1.2 mm corner radius and the MP3 chipbreaker for reliable chip control. Tiger‑tec Gold coated carbide grade Optimised MP3 chipbreaker for stable chips Triangle 60° form with 1.2 mm corner radius Negative 0° rake for robust turning Productive edge life and material suitability The WPP10G grade from the Tiger‑tec Gold series combines a wear-resistant coated carbide with process-stable behaviour suited to ISO P applications (Stahl). This composition delivers consistent edge life and predictable wear rates, reducing unplanned insert changes and improving uptime. For production environments that prioritise repeatability, the coated grade supports steady machining of unalloyed and alloyed Stahl, translating into lower operating costs per component and fewer tool set-up interventions. Secure machining geometry for stable chips and clamping The triangular 60° geometry with a 1.2 mm corner radius and the MP3 chipbreaker create favourable cutting conditions for medium to heavy feeds. The MP3 chip control design promotes short, manageable chips and reduces the risk of entanglement in automatic turning cells, while the negative 0° rake offers mechanical robustness for heavier cuts and roughing passes. Together these features enhance process security: stable chip formation, reliable clamping behaviour and improved surface consistency during interrupted or continuous cuts. Practical guidance for integration and process optimisation Tolerance class M and the standard TNMG footprint make the insert compatible with common toolholders used in turning operations; the TNMG220412-MP3 designation facilitates straightforward exchange. When adapting cutting data, begin with conservative speeds and feeds and use the WPP10G grade for bulk removal and general finishing in Stahl. For specific component materials, depths of cut and coolant strategies, request customised cutting parameters from Metav Werkzeuge to achieve optimal performance and longest tool life with minimal workpiece rework. Contact Metav Werkzeuge for tailored cutting data, application advice and secure supply of genuine Walter Tools TNMG220412-MP3 WPP10G inserts to ensure dependable machining results. Technical data SKU: TNMG220412-MP3-WPP10G-WALTER Article: TNMG220412-MP3 WPP10G Product type: Indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G ISO designation: TNMG220412-MP3 WPP10G Facts Corner radius: 1.2 mm Insert size (inscribed circle): 22 mm Thickness: 4 mm Rake angle: 0° (negative) Form: Triangle 60° Tolerance class: M Special features Coating technology: Tiger‑tec Gold Chipbreaker: MP3 Application group: ISO P (Stahl) Robust negative-rake geometry Stable chip formation and control Designed for general-purpose and productive turning FAQ What materials is this insert intended for? The TNMG220412-MP3 WPP10G is designed primarily for ISO P materials; it is optimised for machining various types of Stahl, including unalloyed and alloyed steels. How does the MP3 chipbreaker improve performance? The MP3 chipbreaker on the TNMG220412-MP3 WPP10G promotes short, controlled chips and reduces the risk of chip build-up, improving process stability and surface quality. Is the insert suitable for roughing and finishing? Yes, the WPP10G grade and the 1.2 mm corner radius provide versatility for both heavier roughing cuts and general finishing in Stahl when appropriate cutting data are applied. What does the negative 0° rake mean for machining? A negative 0° rake gives the insert enhanced edge strength for heavy or interrupted cuts; the TNMG220412-MP3 WPP10G therefore offers greater resistance to mechanical shock and chipping. Are these inserts compatible with standard TNMG toolholders? The TNMG220412-MP3 WPP10G follows the common TNMG geometry, making it compatible with typical TNMG toolholders; ensure clamping and seat condition meet manufacturer guidelines. Protected trademarks and product names belong to their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory-new product from the manufacturer. The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TNMG220412-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade combined with the MP3 chipbreaker for secure chip control and consistent tool life when machining steel; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG220412-MP3 WPP20G – indexable turning insert, triangle 60°, for steel | Walter Tools TNMG220412-MP3 WPP20G is an indexable turning insert designed for robust steel machining applications, featuring the Tiger·tec Gold coating and the MP3 chipbreaker for controlled chip formation. Tiger·tec Gold coated carbide grade WPP20G MP3 chipbreaker for reliable chip control Triangular 60° form with 1.2 mm corner radius Relief angle 0° (negative) for stable cutting Safer process control through optimised chip formation The MP3 chipbreaker in this insert is designed to manage chips effectively during turning of steel, reducing the risk of long swarf and improving operator safety. Combined with the Tiger·tec Gold coating and the WPP20G grade, the insert provides consistent edge strength and wear resistance under the thermal and mechanical loads typical for P‑class materials according to ISO 513. The result is improved process reliability and fewer interruptions for chip clearing, which supports higher productivity on turning centres. Geometry built for durability and repeatable performance The triangular 60° form offers three usable cutting edges per insert, helping to reduce tooling costs through efficient edge indexing. The 1.2 mm corner radius increases edge robustness for heavier cuts and interrupted operations, while the 0° (negative) relief angle provides greater stability and resistance to edge chipping. These geometric choices deliver predictable tool behaviour and make the insert suitable for a wide range of turning tasks where tool life and repeatability matter. Specifically tuned for steel applications This insert is specified for the machining of steel (material group P) and its coated carbide composition is engineered to handle the heat and chip formation characteristics of unalloyed and alloyed steels. The WPP20G grade balances wear resistance and toughness, making it a universal option across many steel grades rather than a niche, application-specific grade. For production environments seeking a single, reliable grade for general steel turning, this insert reduces the need for frequent grade changes. Integration into production — compatibility and handling benefits The standard ISO designation ensures straightforward procurement and toolholder compatibility on most turning setups. Using a recognised geometry and chipbreaker such as TNMG220412-MP3 WPP20G simplifies inventory management and supports quick replacement strategies, reducing machine downtime. The coated grade and robust form also contribute to longer intervals between tool changes, which lowers handling time and improves overall machining throughput. For application guidance or to request availability for the Walter Tools TNMG220412-MP3 WPP20G, please contact Metav Werkzeuge for expert advice and supply options. Technical Data Article number: TNMG220412-MP3-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG220412-MP3 WPP20G Walter Tools SKU: TNMG220412-MP3-WPP20G-WALTER Facts Insert form: Triangle 60° Corner radius: 1.2 mm Size: 22 Relief angle: 0° (negative) Grade: WPP20G Chipbreaker: MP3 Tolerance class: M Series: Tiger·tec Gold Special features Coated carbide (Tiger·tec Gold) Designation without grade: TNMG220412-MP3 Material suitability: Steel (P) Application focus: turning / general steel machining FAQ What materials is this insert suitable for? The TNMG220412-MP3 WPP20G is designed primarily for steel machining (ISO group P) and its WPP20G grade and Tiger·tec Gold coating are tuned to the thermal and chip‑forming behaviour of steels. How does the MP3 chipbreaker improve machining? The MP3 chipbreaker on the TNMG220412-MP3 WPP20G shapes chips to prevent long swarf and to facilitate stable evacuation, which enhances process reliability during turning operations in steel. How many cutting edges are available per insert? The triangular 60° form provides three usable cutting edges, allowing quick indexing and economical use of each insert in production. Is this insert suitable for interrupted cuts? Yes; the 1.2 mm corner radius and the negative 0° relief angle on the TNMG220412-MP3 WPP20G increase edge strength and stability, improving resistance to chipping during interrupted cutting. Which manufacturer produces this insert? This insert is supplied by Walter Tools and specified as TNMG220412-MP3 WPP20G for steel applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. The mention of brand names such as Walter Tools is for explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the brand owner. The offered article is an original, factory‑new product of the manufacturer.
TNMG220412-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a proven WPP10G grade optimised for steel, and the MP5 chipbreaker for stable chip formation and predictable tool life; order directly from Metav Werkzeuge or consult our specialists for cutting data and immediate supply. TNMG220412-MP5 WPP10G turning indexable insert — for steel, Tiger‑tec Gold, Walter Tools The TNMG220412-MP5 WPP10G is a triangular turning insert designed for robust steel machining and consistent chip control in production environments. Tiger‑tec Gold coating for wear resistance WPP10G grade optimised for steel applications Triangle 60° form with 1.2 mm nose radius MP5 chipbreaker for controlled chips Improved process reliability and predictable tool life The Tiger‑tec Gold coating together with the WPP10G grade provides a balance of wear resistance and toughness that supports long, stable tool life in steel turning. This combination reduces flank wear and edge breakdown under typical turning loads, which means fewer interruptions for index changes and higher overall machine uptime. The negative rake (0°) geometry increases edge strength for interrupted cuts and roughing operations, delivering consistent results even when material quality varies. Consistent chip control and surface quality for steel components The integrated MP5 chipbreaker is engineered to produce short, controllable chips when machining steel, reducing the risk of chip entanglement and improving process security. Good chip formation helps maintain coolant access to the cutting zone and supports repeatable surface finishes. For operations with batch production or long unattended cycles, the stable chip behaviour translates directly into fewer stoppages and more reliable end-part quality. Precision geometry for versatile turning tasks The triangular 60° shape and 1.2 mm nose radius offer a versatile compromise between strength and profile definition, suitable for general-purpose external turning and facing. The insert’s profile supports moderate finishing passes and robust roughing, enabling a simplified tooling setup across varied part families. Technical terms explained: a larger nose radius increases tool rigidity and surface smoothness, while the negative rake strengthens the cutting edge for heavier cuts. Contact Metav Werkzeuge for customised cutting parameters, availability and swift supply of Walter Tools Tiger‑tec Gold inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: TNMG220412-MP5-WPP10G-WALTER Designation: TNMG220412-MP5 WPP10G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP10G Facts Shape: Triangle 60° Corner radius: 1.2 mm Rake angle: 0° (negative) Chipbreaker: MP5 Thickness code: 04 Inscribed circle / size: 22 Special features Coating: Tiger‑tec Gold (coated cemented carbide) Material suitability: Steel (P) Tolerance class: M Application focus: predictable chip control, robust edge for interrupted cuts FAQ What steels is this insert suited for? The TNMG220412-MP5 WPP10G insert (Walter Tools, Tiger‑tec Gold) is formulated for machining unalloyed and alloyed steels classified under ISO group P, offering stable wear behaviour across a broad steel range. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes short, controllable chips for steel turning, improving process security and enabling longer unmanned runs with consistent surface quality. Is the 1.2 mm nose radius suitable for finishing? A 1.2 mm nose radius gives enhanced rigidity and smoother surfaces compared with smaller radii; it is well suited for general finishing and medium stock-removal tasks when used with appropriate feeds. Can this insert handle interrupted cuts? Yes — the negative rake (0°) and robust grade composition of the WPP10G insert increase edge strength, making it appropriate for interrupted cuts and roughing operations in steel. What does the WPP10G grade offer compared with general-purpose grades? WPP10G, as part of the Tiger‑tec Gold family, combines wear-resistant coatings and a tough substrate to balance long tool life with good resistance against thermal and mechanical shock in steel machining. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220412-MP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of reliable wear resistance, precise geometry and optimised chip control to maintain steady productivity in turning operations; order the insert directly via Metav Werkzeuge or consult our technical advisors for application support. TNMG220412-MP5 WPP20G – Indexable turning insert, Tiger-tec Gold coating (Walter Tools) A TNMG220412-MP5 WPP20G indexable turning insert designed for general-purpose Stahl machining, combining a Tiger-tec Gold coating with an MP5 chipbreaker to ensure consistent chip control and tool life. Indexable insert TNMG220412-MP5 WPP20G by Walter Tools Tiger-tec Gold coated for reliable performance Triangle 60° form with 1.2 mm corner radius Designed for Stahl machining, MP5 chipbreaker Sustained productivity through engineered wear resistance The Tiger‑tec Gold grade delivers a balance of durability and consistent cutting performance that raises throughput in batch or single‑piece production. The coated carbide substrate reduces flank wear and supports higher cutting speeds without sacrificing surface quality. For operations where predictable tool life is critical, this grade provides a measurable advantage: fewer tool changes and more uninterrupted spindle time, helping to reduce overhead and improve machine utilisation. Coating and grade: what the designation means for performance The WPP20G designation identifies a Walter Tools grade based on the Tiger‑tec Gold coating technology and a coated carbide construction. This combination is formulated for optimised wear behaviour when machining Stahl, accounting for the typical heat and chip formation encountered in such materials. The coating improves adhesion resistance and edge stability, which translates into reliable wear resistance and consistent part finish over longer tool life compared with uncoated grades. Geometry that improves chip control and process security The triangular 60° plate form and the MP5 chipbreaker are matched to provide stable chip evacuation and predictable cutting forces. The 1.2 mm corner radius increases edge strength for interrupted cuts while maintaining acceptable surface finish, and the negative 0° rake contributes to a robust cutting edge for heavier depths of cut. These geometric choices reduce the risk of premature edge failure and support repeatable results in mixed production environments. Practical benefits for workshop workflows Integrating this insert reduces setup variability and supports a broader range of turning tasks on Stahl components. The insert’s combination of grade and chipbreaker enables higher metal removal rates in many common turning applications, making it suitable for both finishing and semi‑finishing passes. Fewer tool changes and predictable wear mean operators can plan tool programmes with greater confidence, improving overall machining reliability. Recommended applications and process notes Best results are obtained in turning operations on unalloyed and alloyed Stahl where typical thermal loads and continuous chips occur. The grade performs well across a variety of cutting conditions; however, adjusting feed and speed to the specific workpiece and machine context will optimise both surface quality and tool life. The triangular shape supports multiple indexing locations, helping to extend usable insert life in high‑volume work. How this insert supports quality and efficiency goals By combining a robust grade with controlled geometry, the insert contributes to consistent surface finish, reduced scrap rates and predictable costs per part. The design emphasises process security and ease of planning, allowing production engineers to focus on cycle optimisation rather than frequent tool adjustments. Its balance of performance and versatility makes it a practical choice for demanding turning operations. Contact Metav Werkzeuge for application advice, material‑specific recommendations or to request the TNMG220412‑MP5 WPP20G insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TNMG220412-MP5-WPP20G-WALTER Article: TNMG220412-MP5 WPP20G Type: Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WPP20G Brand: Walter Tools Data Size: 22 mm Thickness: 4.0 mm Corner radius: 1.2 mm Plate form: Dreieck 60° Rake angle: 0° (negativ) Tolerance class: M Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: MP5 Execution: G Material application: P (Stahl) Base designation: TNMG220412-MP5 FAQ What materials is this insert suitable for? The TNMG220412‑MP5 WPP20G insert is designed primarily for machining Stahl (group P) and is tuned to handle the heat and chip characteristics typical of these materials. How does the Tiger‑tec Gold coating influence tool life? The Tiger‑tec Gold coating on the WPP20G grade increases edge stability and wear resistance under standard turning conditions, which typically extends effective tool life and maintains surface finish quality. Which cutting tasks benefit most from this geometry? The triangular 60° shape with a 1.2 mm corner radius and MP5 chipbreaker performs well in semi‑finishing and finishing turning, particularly where stable chip control and robust edges are required. Can the insert be used for interrupted cuts? Yes, the 1.2 mm corner radius and negative rake support interrupted cutting applications by improving edge strength and resistance to chipping when using the TNMG220412‑MP5 WPP20G insert. Is the MP5 chipbreaker suitable for high feed rates? The MP5 chipbreaker is engineered to provide reliable chip control across a range of feeds; optimal feed and speed should be selected according to the specific machine and workpiece to achieve the best balance of productivity and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the respective manufacturer.
TNMG220412-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, consistent Tiger·tec Gold wear resistance and a stable cutting edge for reliable steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. TNMG220412-MP5 (TNMG220412-MP5 WPP30G) WPP30G – Turning insert for steel — Walter Tools The TNMG220412-MP5 WPP30G is a triangular turning insert designed for efficient steel machining, featuring a Tiger·tec Gold coated carbide grade and an MP5 chipbreaker for controlled chip formation. Tiger·tec Gold coating for reliable tool life WPP30G grade optimised for steel machining Triangle 60° insert for versatile turning operations Corner radius 1.2 mm for stable cutting edge Boost productivity through wear-resistant coating and predictable performance The combination of a Tiger·tec Gold coating with the WPP30G carbide grade delivers a balance of hardness and toughness tailored to ISO P materials, meaning unalloyed and alloyed steel. The coated carbide substrate provides consistent wear resistance, which reduces the frequency of index changes and supports longer uninterrupted production cycles. The MP5 chipbreaker is engineered to shape chips reliably during medium to heavy turning of steels, lowering the risk of built-up edge and improving surface quality. For machinists seeking to increase throughput without sacrificing repeatability, this insert offers a measurable improvement in process stability thanks to the coating technology and the grade’s thermal resistance. Secure clamping and stable cutting for reliable part quality The insert’s triangle 60° geometry supplies multiple usable cutting corners per indexable insert, while the corner radius 1.2 mm contributes to a robust cutting edge that dampens vibration. The 0° (negative) rake provides a secure seating under higher cutting forces and supports interrupted cuts or heavier depths of cut without edge failure. Together these features reduce chatter and dimensional variation, which in turn cuts rework and scrap. The design is particularly suitable where consistent component tolerance and surface finish are required in series production or subcontract machining. Practical application guidance and material compatibility Designed for turning tasks classified under ISO group P, the insert is intended primarily for machining various steels. The MP5 chipbreaker and the WPP30G grade favour a combination of good chip control and wear performance, making the insert suitable for both finishing and medium roughing when parameters are matched to the workpiece and machine capability. When switching to different steel grades or when cycle times are critical, contacting the supplier for optimised feeds and speeds will help exploit the insert’s full potential. Coolant use and appropriate clamping are recommended to extend edge life and maintain consistent results across batches. Contact Metav Werkzeuge for tailored cutting data, fast supply of Walter Tools Tiger·tec Gold inserts and expert advice on integrating the TNMG220412-MP5 WPP30G into production Technical data Article number: TNMG220412-MP5-WPP30G-WALTER Designation: TNMG220412-MP5 WPP30G Type: Turning indexable insert Facts Insert size: 22 Shape angle: 60° Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Carbide grade: WPP30G (coated carbide, Tiger·tec Gold) Chipbreaker: MP5 Series: Tiger·tec Gold Material application: Steel (ISO P) Plate thickness: 04 Form: Triangle 60° FAQ What materials is this insert suitable for? The TNMG220412-MP5 WPP30G is specified for ISO P materials and is optimised for machining various steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP30G grade increases wear resistance and thermal stability, extending edge life and improving process consistency. What is the purpose of the MP5 chipbreaker? The MP5 chipbreaker provides controlled chip formation for medium to heavy steel turning, improving evacuation and surface finish. Walter Tools: The Walter AG (marketed as Walter Tools) is a global manufacturer of precision cutting tools for metalworking. The company is recognised for high process security, precise machining and consistent tool life. Protected trademarks and product names belong to their respective owners; products listed are original, brand-new items from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TNMG220412-RM5 WMP20G G Wendeplatten - Walter Tools
Take advantage of the combination of Walter Tools' Tiger·tec Gold technology and the RM5 chipbreaker to ensure stable cutting edges and reproducible chip control when machining rostfreier Stahl; this yields more consistent component quality and reduced process interruptions. Order the insert directly via Metav Werkzeuge or request application advice from their consultants. TNMG220412-RM5 WMP20G — Indexable turning insert, Tiger·tec Gold, for rostfreier Stahl (Walter Tools) The TNMG220412-RM5 WMP20G is a triangular 60° indexable turning insert with an RM5 chipbreaker, designed for medium to robust machining of rostfreier Stahl and for stable edge performance. Tiger·tec Gold coated grade WMP20G Optimised chip control with RM5 breaker Triangular 60° form, 1.2 mm nose radius Suited for rostfreier Stahl machining Consistent cutting performance for rostfreier Stahl The combination of the WMP20G grade with Tiger·tec Gold coating provides a balance between wear resistance and edge toughness that is particularly advantageous for rostfreier Stahl. The coating technology supports controlled friction and heat management at the cutting zone, which promotes stable chip formation and reduces the tendency for built-up edge. Thanks to the RM5 chipbreaker, chips are segmented and discharged reliably, improving process repeatability and lowering the risk of unexpected stoppages. This technical blend translates directly into fewer scrap parts and steadier cycle times on production lines. Improved productivity through stable edges and predictable life A coated cemented-carbide grade that emphasises edge stability increases usable tool life and helps maintain part tolerances over longer runs. The insert’s design—a negative 0° relief for robust engagement—enables secure cutting in heavier cuts and interrupted operations without compromising the cutting edge. The result is a measurable uplift in throughput and reduced frequency of insert changes, which supports leaner tool inventories and more efficient shift planning. These characteristics are particularly valuable in high-mix environments where process security is critical. Practical geometry for versatile workshop use The triangular 60° form offers several indexed cutting corners, making the insert cost-effective in daily shop use. The 1.2 mm nose radius smooths surface finish and helps resist edge chipping under variable conditions, while the RM5 chipbreaker is tuned for medium to sturdy cutting parameters. Together, these design elements facilitate straightforward integration into standard turning toolholders and make the insert appropriate for both job-shop and serial production contexts. For customers seeking application guidance, Metav Werkzeuge can advise on holder selection and cutting data. Clear material match and selection guidance Classified for ISO group M, this insert is optimised for rostfreier Stahl, which typically requires tools that manage heat and plastic deformation at the cutting edge. The coated grade and chipbreaker reduce the common issues of adhesion and thermal softening, so finishing quality and dimensional stability are easier to maintain. Selecting the TNMG220412-RM5 WMP20G supports a predictable process window and helps ensure repeatable surface integrity across batches, contributing to overall process reliability and component consistency. For targeted advice on integrating Walter Tools' WMP20G inserts into production or for immediate procurement, contact Metav Werkzeuge (info@metav-werkzeuge.com · +49 2822 7131930) to discuss suitable holders, cutting data and delivery options. Technical data Article number: TNMG220412-RM5-WMP20G-WALTER Designation: TNMG220412-RM5 WMP20G Series: Tiger-tec Gold Grade: WMP20G Facts Insert form: Triangle 60° Size: 22 Thickness: 04 Nose radius: 1.2 mm Relief angle: 0° (negative) Special features RM5 chipbreaker Coated cemented carbide (Tiger·tec Gold) Optimised for rostfreier Stahl Triangular 60° geometry FAQ What materials is this insert designed for? The TNMG220412-RM5 WMP20G is optimised for rostfreier Stahl and is specified for ISO group M applications where stable chip formation and edge security are required. How does the RM5 chipbreaker affect performance? The RM5 chipbreaker on the TNMG220412-RM5 promotes segmented chips and reliable evacuation, which enhances process stability and reduces the likelihood of chip-related interruptions. Is the insert suitable for interrupted cuts? Yes, the negative 0° relief and the robust Tiger·tec Gold coating make this insert suitable for medium to robust cutting conditions, including interrupted cuts. How many usable cutting edges does the insert offer? The triangular 60° form provides multiple indexed edges, delivering economical edge utilisation for routine turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, brand-new product from the manufacturer (Walter Tools).
TNMG220412-RM5 WMP20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and a geometry optimised for stainless-steel turning to keep production consistent and efficient; order inserts or consult Metav Werkzeuge for application advice. TNMG220412-RM5 WMP20S – Indexable turning insert for stainless steels (Walter Tools) TNMG220412-RM5 WMP20S is an indexable insert engineered for medium to robust stainless-steel turning applications, offering a balance of edge stability and predictable chip formation. Tiger·tec Silver coated carbide for durability Optimised RM5 chipbreaker for secure chip control Triangular 60° shape with 1.2 mm corner radius Suitable for machining stainless steel (ISO M) Stable cutting performance for demanding stainless-steel work The TNMG220412-RM5 WMP20S insert combines a Tiger·tec Silver coating with a coated carbide substrate to resist abrasive wear and reduce adhesion when machining stainless steels. The coating technology supports a stable cutting edge under the elevated temperatures typical of these alloys, which helps to lower the risk of built-up edge and maintain surface finish. In practical terms, this means fewer interruptions for edge changes and more predictable component quality during continuous production runs. Geometry designed for reliable chip control and insert life With an RM5 chipbreaker and a 60° triangular form, the geometry provides controlled chip formation and reliable evacuation across a range of turning conditions. The 1.2 mm corner radius increases edge strength for interrupted cuts and reduces edge chipping during roughing passes. The negative rake (0°) contribution to cutting forces enhances robustness, so the insert performs consistently in medium to heavier cuts while helping to protect the toolholder and workpiece from vibration-induced issues. Shop-floor benefits: consistency, indexability and process safety The triangular plate offers multiple usable edges per insert, supporting economical indexability and reduced tooling downtime. The combination of the Tiger·tec Silver grade and RM5 chip control yields consistent part finish and repeatable cycle times, which are crucial for process planning and throughput. For cell or line production, the insert’s predictability in stainless-steel machining contributes to overall process safety and simplified parameter setting, making tool selection and commissioning faster for operators and engineers alike. For tailored advice on Walter Tools inserts and to verify suitability for specific stainless-steel grades, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application parameters and stock availability Technical Data SKU: TNMG220412-RM5-WMP20S-WALTER Designation: TNMG220412-RM5 WMP20S Product type: Turning insert Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Shape: Triangle 60° Free cutting angle: 0° (negative) Insert size: 22 Thickness code: 04 Special features Grade: WMP20S (Tiger·tec Silver) Chipbreaker: RM5 Coating: Tiger·tec Silver (coated carbide) Suitable for: stainless steels (ISO M) Execution code: G FAQ What materials is this insert intended for? The TNMG220412-RM5 WMP20S insert from Walter Tools is specified for stainless steels (ISO M) and supports medium to robust machining conditions. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on the TNMG220412-RM5 WMP20S promotes secure chip control and consistent chip form, improving process stability and reducing risk of chip entanglement. What are the advantages of the Tiger·tec Silver grade? Tiger·tec Silver on the TNMG220412-RM5 WMP20S enhances wear resistance and heat management, contributing to longer edge life and steady surface quality in turning operations. Can the triangular shape be indexed for multiple edges? Yes, the triangular 60° geometry of this Walter Tools insert allows multiple indexings to use several cutting edges, improving tool economy and reducing changeover frequency. Is the corner radius suitable for semi-finishing operations? The 1.2 mm corner radius on the TNMG220412-RM5 WMP20S provides a robust edge for semi-finishing and roughing, offering a balance between strength and achievable surface finish. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory-new merchandise of the manufacturer.
TNMG220412-RM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, reliable chip control and robust edge stability for demanding turning operations; order the TNMG220412-RM5 WSM20S directly via Metav Werkzeuge or ask the consultants for application advice. TNMG220412-RM5 WSM20S – Triangle 60° indexable insert with Tiger·tec Silver coating (Walter Tools) TNMG220412-RM5 WSM20S is an indexable turning insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys, offering a stable cutting edge and optimised chip control. *Tiger·tec Silver coated carbide *Optimised RM5 chipformer *Designed for rostfreier Stahl & superalloys *Triangle 60° geometry, 1.2 mm corner radius Stable cutting in rostfreier Stahl and superalloys for consistent productivity The WSM20S grade, applied in the Tiger·tec Silver family, is formulated to resist the thermal and mechanical stresses encountered when machining rostfreier Stahl and high-temperature alloys. The combination of a coated carbide substrate and a stable cutting edge reduces the risk of built-up edge and promotes reproducible performance over longer tool life. For production environments this means fewer interruptions for insert changes and a more predictable output per shift, improving machine utilisation and part-to-part consistency. Predictable chip control and surface quality through RM5 geometry An optimised RM5 chipformer delivers controlled chip segmentation, minimising entanglement and ensuring smooth evacuation from the cutting zone. This geometry supports steady cutting forces and contributes directly to surface finish quality on difficult-to-machine materials. Paired with the triangle 60° form and a 1.2 mm corner radius, the insert provides a reliable balance between strength at the cutting edge and the ability to sustain force during interrupted cuts or heavy feed conditions. Geometry and coating tuned for thermal and mechanical loads The insert’s negative 0° rake increases edge robustness under high cutting pressures, while the Tiger·tec Silver coating enhances thermal barrier properties and wear resistance. These characteristics combine to reduce flank wear and maintain dimensional accuracy over repeated indexing cycles. For operations where component tolerances and repeatability are critical, the coated carbide grade supports longer intervals between inspections and regrinds, which positively affects overall process economy. Application-focused benefits for machining strategies Use this indexable insert where stable edge life and chip control are priorities: roughing work on bar stock, semi-finishing of shafts, and turning operations on challenging alloys. The insert’s design reduces the likelihood of thermal softening at the cutting edge and supports consistent tool life across different batches of rostfreier Stahl or superalloy workpieces. This reliability simplifies process planning and reduces the need for frequent parameter adjustments. Contact Metav Werkzeuge for application recommendations and availability of Walter Tools Tiger·tec Silver inserts and discuss the best machining parameters for specific rostfreier Stahl grades Technical data Article number: TNMG220412-RM5-WSM20S-WALTER Designation: TNMG220412-RM5 WSM20S Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Insert size: 22 Thickness code: 04 Corner radius: 1.2 mm Free rake: 0° (negative) Shape: Triangle 60° Tolerance class: M Grade: WSM20S Chipformer: RM5 Applicable material groups: S / M Special features Coated carbide grade for high thermal resistance Optimised chip control for safe chip evacuation Suitable for rostfreier Stahl and heat-resistant superalloys Robust edge for interrupted cuts and heavy feeds Designed to reduce built-up edge and flank wear FAQ What materials is this insert suitable for? The TNMG220412-RM5 WSM20S insert is suitable for rostfreier Stahl and heat-resistant superalloys (material groups S and M), as indicated by its WSM20S grade and Tiger·tec Silver coating. How does the RM5 chipformer affect machining? The RM5 chipformer on this turning insert improves chip segmentation and evacuation, which stabilises cutting forces and helps maintain surface finish during continuous and interrupted cuts. What is the advantage of the negative 0° rake? A negative 0° rake increases edge strength and resistance to mechanical shock, making the insert more robust during heavy cuts and when machining difficult workpiece materials. How large is the corner radius and why does it matter? This insert features a 1.2 mm corner radius; a larger corner radius strengthens the cutting edge and helps distribute cutting forces, which supports longer tool life under higher feeds. Is the product part of a recognised coating family? Yes, the grade belongs to the Tiger·tec Silver series, a coated carbide family designed to enhance thermal and wear resistance for demanding turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220412-RM5 WSM30S WSM30S Wendeplatten - Walter Tools
High process reliability and extended tool life result from the combination of the WSM30S grade and Tiger·tec Silver coating, providing consistent performance when machining stainless steel and heat‑resistant alloys. Use this insert for productive turning operations and contact Metav Werkzeuge for application guidance or configuration recommendations. TNMG220412-RM5 WSM30S — Turning indexable insert, Tiger·tec Silver, 1.2 mm corner radius (Walter Tools) TNMG220412-RM5 WSM30S is a triangular indexable insert designed for stable cutting in stainless steel and high‑temperature alloys, optimised for industrial turning applications Tiger·tec Silver coating for long tool life Designed for stainless steel and superalloys 60° triangular insert, 1.2 mm corner radius RM5 chipbreaker for stable chip control Proven coating and grade for demanding materials The combination of the Tiger·tec Silver coating with the WSM30S grade delivers improved heat resistance and controlled wear behaviour in demanding turning tasks. The coating reduces adhesion and thermal loading on the cutting edge, which supports a steady cutting process when machining stainless steel and superalloys. This results in fewer unscheduled tool changes and a reduction in process variation, making the insert particularly suitable where reproducible part quality and long runtimes are required. Geometry engineered for reliable chip control and edge stability A 60° triangular shape with a 1.2 mm corner radius and negative rake 0° provides robust edge support and predictable engagement in interrupted and continuous cuts. The RM5 chipbreaker is designed to produce short, controllable chips under moderate to heavy cutting conditions, which improves surface finish and reduces the risk of built‑up edge formation. The geometry also aids rigidity in the toolholder, lowering vibration and improving dimensional stability during finishing passes. Clear suitability and application guidance The insert targets ISO groups M and S, meaning it is intended for stainless steel (M) and heat‑resistant superalloys and titanium (S). These material classes demand resistance to heat and adhesion; the WSM30S grade is tailored to provide stable cutting edges and consistent chip formation in such alloys. For operators less familiar with ISO group designations: M = stainless steel; S = heat‑resistant alloys and titanium. Selection of cutting parameters should reflect workpiece hardness and alloy behaviour to exploit the insert’s strengths. Productivity benefits and workshop efficiency Using a coated, application‑focused insert reduces downtime and increases throughput: durable edge life and predictable wear translate into less frequent indexing and lower tool inventory turnover. The design emphasises process security and repeatable results, which supports lean production and cost control across batch and serial turning operations. Paired tool and holder selection, together with appropriate coolant strategy, will further enhance the economic advantages offered by this insert. For tailored recommendations on integrating the Walter Tools TNMG220412-RM5 WSM30S insert into production, or to discuss cutting parameters for stainless steel and superalloys, contact Metav Werkzeuge’s technical team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: TNMG220412-RM5-WSM30S-WALTER Label: Drehwendeschneidplatte TNMG220412-RM5 WSM30S Walter Tools Product type: Drehwendeschneidplatte / Turning indexable insert Brand: Walter Tools Facts Corner radius: 1.2 mm Insert size: 22 Relief angle: 0° (negative) Thickness code: 04 Special features Coating: Tiger·tec Silver Grade: WSM30S Chipbreaker: RM5 Insert shape: Triangle 60° Toleranzklasse: M Ausführung: G Material groups: S / M (superalloys/titanium and stainless steels) FAQ What materials is this insert best suited for? The TNMG220412-RM5 WSM30S insert from Walter Tools is designed for stainless steel (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering reliable edge life and controlled chip formation in these materials. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker promotes short, controllable chips under a range of cutting conditions, improving surface finish and reducing the risk of built‑up edge when using the Walter Tools insert in moderate to heavy turning operations. Which coating improves performance in high‑temperature cutting? The Tiger·tec Silver coating on the WSM30S grade increases heat resistance and reduces adhesion on the cutting edge, leading to longer tool life and greater process stability in demanding applications. What are the geometric advantages of the triangular 60° insert? A 60° triangle provides three usable cutting edges per insert and, combined with the 1.2 mm corner radius and negative rake 0°, delivers robust edge support and predictable cutting behaviour in both continuous and interrupted cuts. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220412-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a robust RP5 chipbreaker for reliable turning of steel; the insert’s negative 0° rake and 1.2 mm corner radius deliver durable cutting performance. Order the insert via Metav Werkzeuge or ask their consultants for application advice. TNMG220412-RP5 WPP05G Drehwendeschneidplatte — Tiger‑tec Gold, for steel | Walter Tools The TNMG220412-RP5 WPP05G is a triangular 60° indexable insert designed for productive external turning of steel, offering a coated‑carbide grade optimised for wear resistance and consistent chip formation. Tiger‑tec Gold coating for long tool life RP5 chipbreaker for controlled chips Triangular 60° geometry, 1.2 mm corner radius Negative 0° rake for robust cutting edge Greater uptime through advanced coating and grade selection The combination of the Tiger‑tec Gold coating and the WPP05G grade yields a coated carbide solution developed for machining steel (material group P). The multilayer coating improves resistance to abrasive and adhesive wear, which extends tool life and reduces tool changes in high‑volume production. For process planners this means a lower cost per component and fewer unscheduled interruptions: the coating acts as a thermal and chemical barrier at the cutting edge, slowing degradation during typical turning conditions. Consistent chip control and a stronger cutting edge for tougher cuts The insert’s RP5 chipbreaker is engineered to produce short, manageable chips when cutting steels, improving evacuation and surface quality. The negative 0° rake increases edge strength and reduces edge chipping under interrupted or heavy cuts, while the triangular 60° geometry and corner radius 1.2 mm balance strength and edge accessibility. For shops transitioning from general‑purpose grades, these geometric choices mean improved reliability when facing varying feed rates and depths of cut. Practical compatibility and process benefits for production Marked tolerance class M and the proven series construction allow straightforward integration into standard toolholders for turning operations. The insert’s specification targets universal steel machining needs, supporting both roughing and general finishing when set up with appropriate cuts. For procurement and planning teams, the result is a compact inventory solution: one grade that covers a broad range of steel grades with stable performance, reducing the need for multiple specialised inserts. Contact Metav Werkzeuge for tailored application advice and to secure the Walter Tools TNMG220412-RP5 WPP05G insert for enhanced productivity in steel turning — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TNMG220412-RP5-WPP05G-WALTER SKU / designation: TNMG220412-RP5 WPP05G Series: Tiger‑tec Gold Grade: WPP05G Manufacturer: Walter Tools Material group: P (steel) Tolerance class: M Numbers / Core technical data Geometry: triangular 60° Inscribed circle / size: 22 Corner radius: 1.2 mm Free rake / relief angle: 0° (negative) Thickness: 04 Designs / Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: RP5 Execution: G Product type: Drehwendeschneidplatte (indexable insert) FAQ What steels is this insert designed for? The TNMG220412‑RP5 WPP05G is specified for material group P, which covers unalloyed and alloyed steels; the WPP05G grade and Tiger‑tec Gold coating are tuned for typical steel cutting temperatures and chip formation. How does the negative 0° rake affect cutting? A negative 0° rake on this indexable insert increases the cutting edge strength and improves resistance to mechanical shock; the TNMG220412‑RP5 with RP5 chipbreaker is therefore suitable for heavier and interrupted cuts. Can this insert be used for finishing operations? Yes — with appropriate feeds and speeds the insert provides acceptable surface quality for general finishing, benefiting from the coated carbide grade for consistent performance. What is the role of the RP5 chipbreaker? The RP5 chipbreaker on the TNMG220412‑RP5 WPP05G promotes short, controllable chips when machining steel, aiding chip evacuation and reducing the risk of surface damage. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the RP5 chipbreaker combined with a robust 60° triangular form to achieve stable, cost‑effective steel turning; order via Metav Werkzeuge or consult our specialists for process recommendations. TNMG220412-RP5 WPP10G turning indexable insert — Tiger‑tec Gold, RP5 chipbreaker (for steel) by Walter Tools The TNMG220412-RP5 WPP10G is an indexable turning insert designed for productive machining of steel, offering the Tiger‑tec Gold coated grade WPP10G for improved tool life and consistent chip control. Tiger‑tec Gold coated grade WPP10G Optimised RP5 chipbreaker for controlled chips 60° triangular insert with 1.2 mm corner radius 0° negative rake for stable cutting conditions Longer tool life and predictable costs through advanced coating The combination of the Tiger‑tec Gold coating and the WPP10G carbide grade reduces flank wear and preserves the cutting edge under typical steel turning conditions. By selecting a coated hardmetal grade that is balanced for wear resistance and toughness, process planners can expect extended tool life and fewer tool changes, which lowers overall machining costs. The descriptive grade classification indicates a focus on steel applications (ISO P), which helps in matching cutting data to material, reducing trial runs and improving shop-floor efficiency. Improved productivity via optimised chip control and geometry The RP5 chipbreaker is tailored to generate short, controllable chips when turning steels, decreasing downtime caused by chip entanglement and improving surface consistency. The insert’s triangular 60° shape and 1.2 mm corner radius provide a favourable balance between strength and accessibility for finish and semi‑roughing operations. Together with the 0° negative rake, this geometry delivers high process stability when facing interrupted cuts or variable feed conditions, supporting reproducible cycle times in batch production. Application focus and integration into machining processes Engineered for ISO P materials, this insert is suitable for unalloyed and alloyed steels where typical heat and chip formation are expected. The coated hardmetal construction supports both steady finishing passes and more demanding roughing when cutting parameters are adjusted accordingly. Process engineers benefit from clear machinability guidance: use the grade’s characteristics to set conservative feeds initially and increase once satisfactory tool performance is observed. For bespoke cutting data or compatibility checks with specific toolholders, application advice is readily available. For high‑productivity steel turning with Walter Tools’ Tiger‑tec Gold grade, request this TNMG220412‑RP5 WPP10G insert through Metav Werkzeuge or contact our technical consultants at Metav Werkzeuge for tailored cutting data and ordering support: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: TNMG220412-RP5-WPP10G-WALTER Designation: TNMG220412-RP5 WPP10G Product type: Turning indexable insert Brand: Walter Tools Facts Corner radius: 1.2 mm Insert geometry: Triangle 60° Relief/rake angle: 0° (negative) Inscribed circle / size: 22 Plate thickness: 04 Tolerance class: M Special features Tiger‑tec Gold coating Grade: WPP10G (coated carbide) Chipbreaker: RP5 Suitable for steel (ISO P) Robust triangular form for stable cutting FAQ What materials is this insert intended for? The TNMG220412‑RP5 WPP10G insert is designed for machining steels (ISO P) and is optimised for the heat and chip formation typical of unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP10G grade improves wear resistance and cutting edge stability, resulting in longer tool life and fewer interruptions in production. Which machining tasks suit the RP5 chipbreaker? The RP5 chipbreaker excels in producing short, well controlled chips during turning of steel, making it suitable for both finishing and semi‑roughing operations where chip control is essential. Does the 0° negative rake affect cutting stability? The 0° negative rake delivers increased insert strength and stability during cutting, especially under interrupted cuts or higher feed conditions, helping to maintain consistent cycle times. Is this insert compatible with standard toolholders? The insert follows common TNMG form factors and fits holders designed for TNMG‑style triangular inserts; verify holder compatibility with the TNMG220412 form factor before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, brand‑new product from the stated manufacturer (Walter Tools).
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com