TNMG220412-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the RP5 chipbreaker for consistent chip control and the compact triangle 60° geometry to increase tool life and process reliability in steel turning; order directly via Metav Werkzeuge or ask the consultants for application support. TNMG220412-RP5 WPP20G – Turning indexable insert (Triangle 60°, RP5) by Walter Tools The TNMG220412-RP5 WPP20G is a coated carbide triangular turning insert designed for productive steel turning applications, offering a Tiger·tec Gold coating and an RP5 chipbreaker for stable machining results. Tiger·tec Gold coating for long tool life RP5 chipbreaker for reliable chip control Triangle 60° shape with 1.2 mm corner radius Designed for steel turning, negative 0° rake Consistent chip control and stable cutting performance The insert’s RP5 chipbreaker is engineered to create predictable chip segmentation during longitudinal and finishing cuts. This improves surface quality and reduces the risk of built-up edge or uncontrolled swarf, which helps to maintain cycle-time consistency. The combination of a coated carbide substrate and a well-matched chipbreaker leads to fewer tool changes and more reliable machine utilisation, an advantage for production environments seeking measurable gains in throughput. Coating technology that extends tool life for steels The Tiger·tec Gold coating system and the WPP20G grade provide a balanced performance across a wide range of steels. The coating reduces flank wear and thermal sensitivity, enabling higher sustained cutting parameters in many turning tasks. For operations that process unalloyed or alloyed steel, this combination translates into extended tool life and lower overall tooling costs per component, supporting a clearer return on investment when compared with standard uncoated grades. Geometry and edge specifics that support accuracy The triangular 60° insert shape and the 1.2 mm corner radius are suited to both light finishing and more robust turning operations, where a compromise between strength and edge acuity is required. The negative 0° rake (G execution) increases edge stability under interrupted cuts and when facing variable workpiece conditions. These geometric choices contribute to repeatable dimensional outcomes and consistent surface integrity, particularly where process stability is a priority. Practical selection and application guidance for the workshop When selecting this grade for a machining task, pair the insert with tooling and parameters optimised for steel cutting: stable clamping, correct tool overhang and conservative entry feeds will leverage the WPP20G coating benefits. For mixed-volume production, this insert offers a straightforward way to reduce set-up frequency while maintaining finish quality. For further machining data, Metav Werkzeuge’s advisors can provide cutting parameter recommendations tailored to the specific steel grade and machine capability. For application support, availability checks or to request tailored cutting data for Walter Tools inserts, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultation is available to help integrate the TNMG220412-RP5 WPP20G into production workflows Technical Data Article number: TNMG220412-RP5-WPP20G-WALTER Designation: TNMG220412-RP5 WPP20G Product type: Drehwendeschneidplatte / Turning indexable insert Manufacturer: Walter Tools Core figures Insert size: 22 mm Plate thickness: 4 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Design & features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: RP5 Suitable for: Steel (P) Execution: G (negative rake) Plate designation without grade: TNMG220412-RP5 Product SKU: TNMG220412-RP5-WPP20G-WALTER FAQ What materials is this insert suitable for? The TNMG220412-RP5 WPP20G is designed primarily for steel machining (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the cutting conditions typical of unalloyed and alloyed steels. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built-up edge and improving surface finish during turning with the TNMG220412-RP5 insert. What does the 1.2 mm corner radius mean for part quality? A 1.2 mm corner radius balances edge strength and finish capability; it supports consistent dimensional accuracy and improved resistance to edge chipping in mixed finishing and light roughing operations. Is the grade suitable for interrupted cuts or heavy feeds? The insert’s negative 0° rake and the coated WPP20G grade provide enhanced edge stability, making it a good choice for interrupted cuts and conditions with variable load, though tuning of feed and depth of cut is advised. Which series and brand produce this insert? This insert is part of the Tiger·tec Gold series and supplied under the Walter Tools brand; it is intended for industrial turning tasks in steel. Manufacturer/Responsible: Walter AG (brand: Walter Tools); Headquarters: Tübingen, Germany. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation implied. The offered item is an original, factory-new product of the manufacturer.
TNMG220412-RP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the high wear resistance of the Tiger·tec Gold grade combined with the stable RP5 chipbreaker and a 60° triangular form for consistent performance in steel turning; order directly via Metav Werkzeuge or consult their specialists for production-ready advice. TNMG220412-RP5 WPP30G indexable turning insert — Tiger·tec Gold, 1.2 mm corner radius, for steel machining (Walter Tools) The TNMG220412-RP5 WPP30G is a triangular indexable turning insert engineered for reliable machining of steel, offering a Tiger·tec Gold coated carbide grade and a 0° negative rake for stable cutting. Tiger·tec Gold coated for long life Optimised RP5 chipbreaker for consistent chips Triangle 60° form for versatile turning 1.2 mm corner radius for robust edge High wear resistance for longer tool life The combination of the Tiger·tec Gold coating and the WPP30G carbide grade provides elevated abrasion resistance during continuous turning of steel. This coating technology reduces flank wear and helps maintain a sharp cutting edge over longer operating intervals, which translates into fewer insert changes and steadier cycle times. For shops processing a broad range of unalloyed and alloyed steels, the hardened surface treatment of the grade supports process reliability and predictable tool life under typical heat and chip-forming conditions. Stable chip control and secure cutting geometry With the integrated RP5 chipbreaker and a 0° negative rake, the insert promotes controlled fragmentation and evacuation of swarf, particularly in medium to heavy turning operations. The 1.2 mm corner radius increases edge strength, reducing the risk of chipping at interrupted cuts and improving edge stability when encountering variable workpiece conditions. These geometric choices aid in maintaining consistent surface finish while lowering the likelihood of unexpected tool failures during serial production. Consistent productivity and process security on the machine The triangular 60° shape offers multiple indexing positions, optimising the number of usable cutting edges per insert and reducing tooling costs per machined part. The M tolerance class ensures dimensional reliability for repeatable seat and clamping arrangements on standard tool holders. Together, the coated carbide substrate and compact plate geometry make this indexable insert suitable for programmers and operators seeking a balance of productivity, predictable wear behaviour and straightforward tool management in turning centres and lathes. Clear application guidance and compatibility Designed specifically for steel applications (ISO group P), this insert is best employed for general turning of unalloyed and alloyed steels where conventional chip formation and moderate cutting forces occur. The designation hints at practical handling: the RP5 chipbreaker supports everyday machining scenarios while the Tiger·tec Gold grade offers improved life under thermal and mechanical stress. For advice on specific cutting parameters or holder compatibility, the Metav Werkzeuge technical team is available to provide tailored recommendations. For robust steel turning with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for ordering guidance or application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMG220412-RP5-WPP30G-WALTER SKU: TNMG220412-RP5-WPP30G-WALTER Designation: TNMG220412-RP5 WPP30G Brand: Walter Tools Product type: Indexable turning insert Numbers / Core technical data Insert size: 22 Thickness: 04 Corner radius: 1.2 mm Insert geometry: Triangle 60° Rake angle: 0° Tolerance class: M Designs / Special features Coating / Grade: Tiger·tec Gold / WPP30G Chipbreaker: RP5 Substrate: Coated carbide (hardmetal) Application group: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The TNMG220412-RP5 WPP30G insert is formulated for machining steel (ISO group P), covering common unalloyed and alloyed steels. How does the Tiger·tec Gold grade affect performance? The Tiger·tec Gold coating on the WPP30G grade improves wear resistance and heat protection, which enhances tool life and process stability during steel turning. What is the benefit of the RP5 chipbreaker? The RP5 chipbreaker delivers consistent chip formation and evacuation, reducing swarf-related interruptions and helping to maintain a reliable surface finish. Is the corner radius suitable for interrupted cuts? With a 1.2 mm corner radius, the insert offers a robust cutting edge that tolerates moderate interruptions and variable cutting conditions without excessive chipping. Which tool holders are compatible with a TNMG220412 insert? Compatibility depends on the holder design; the TNMG220412 form matches standard triangular indexable turning holders sized for 22-series inserts—check holder seat and clamping type for correct fit. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220416-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKK20S cutting grade for dependable cast iron machining; the triangular 60° geometry with a 1.6 corner radius supports stable chip formation and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the experts for application-specific advice. TNMG220416‑MK5 WKK20S indexable turning insert – Tiger‑tec Silver, Walter Tools the TNMG220416‑MK5 WKK20S is an indexable turning insert engineered for cast iron turning operations, combining a robust geometry with a coated carbide grade for reliable production results Tiger‑tec Silver coating for long life WKK20S grade optimised for cast iron Triangle 60° form for strong cutting edges MK5 chipbreaker for controlled chips Optimised for cast iron turning with reliable chip control The insert is tailored for machining cast iron and benefits from the WKK20S grade within the Tiger‑tec Silver family, developed to resist abrasive wear and cope with short, breaking chips typical of grey and nodular cast irons. The integrated MK5 chipbreaker promotes predictable chip formation, which reduces interruption risks and supports continuous production flow. This technical combination yields a balance of tool life and process reliability that lowers unplanned downtime in series production. Coating and grade extend tool life and maintain productivity The Tiger‑tec Silver coating applied to the coated carbide substrate increases wear resistance and thermal stability during heavy intermittent cuts. As a result, cutting edge integrity is preserved over extended tool rotations, translating to fewer tool changes and better machine utilisation. For manufacturers seeking an economical yet durable solution, this cutting grade maintains performance across common cast iron grades while enabling consistent workpiece quality and repeatability. Geometry that delivers dimensional stability and surface quality The triangular 60° plate form provides three usable cutting edges and a rigid platform for interrupted cuts. With a corner radius of 1.6 and a negative relief of 0°, the geometry is designed to withstand higher radial forces while producing stable tool–workpiece contact. This leads to improved process stability and surface finish without sacrificing edge strength. The design is particularly beneficial in turning tasks requiring robust edge security and consistent dimensional results. Practical application guidance and process advantages The TNMG220416‑MK5 insert with MK5 chipbreaker is best applied where controlled chip flow and reliable wear behaviour are required in cast iron machining. The combination of grade and breaker supports effective swarf management and reduces the risk of chip-related downtime. For integration into existing tooling, the insert’s geometry and grade are suitable for standard turning toolholders designed for triangular inserts and deliver predictable performance across batch and single-piece production. Contact Metav Werkzeuge today to discuss how Walter Tools’ Tiger‑tec Silver grade can improve cast iron turning efficiency; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: TNMG220416-MK5-WKK20S-WALTER Name: Drehwendeschneidplatte TNMG220416-MK5 WKK20S Walter Tools Designation: TNMG220416-MK5 WKK20S Manufacturer: Walter Tools Facts Plate form: Dreieck 60° Corner radius: 1.6 Relief angle: 0° (negativ) Size: 22 Thickness: 04 Special features Series: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MK5 Applicable material group: K (cast iron) Tolerance class: M Execution: G FAQ What materials is this insert designed for? The TNMG220416‑MK5 WKK20S insert is designed primarily for machining cast iron; the WKK20S grade and Tiger‑tec Silver technology are tuned to handle abrasive wear and the short, breaking chips typical of these materials. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on this insert promotes controlled chip formation, improving swarf evacuation and reducing the likelihood of chip-related interruptions during cast iron turning. Is this insert suitable for interrupted cuts? Yes, the triangular 60° geometry combined with a 1.6 corner radius and a 0° negative relief offers robust edge strength and stability suited to interrupted cutting conditions. How many cutting edges are available per insert? The triangular form provides three usable cutting edges per insert, offering practical economy for serial turning applications. Which series and coating does this insert use? This insert belongs to the Tiger‑tec Silver series and uses the WKK20S coated carbide grade to enhance wear resistance and thermal stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG220416-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from a wear-resistant coating, a chipbreaker tuned for steel and a 1.6 mm corner radius for reliable edge life and consistent part quality. Take advantage of the combination of productivity, predictable chip control and simple indexability — order via Metav Werkzeuge or request application advice from our consultants. TNMG220416-MP5 WPP10G indexable turning insert, triangle 60°, for steel — Walter Tools TNMG220416-MP5 WPP10G is a triangular indexable turning insert designed for productive steel machining with a Tiger·tec Gold coated grade and MP5 chipbreaker. Tiger·tec Gold coating for extended tool life Triangle 60° form with 1.6 mm corner radius MP5 chipbreaker optimised for steel machining Higher throughput through stable wear and chip control The combination of the Tiger·tec Gold coating and the WPP10G grade delivers predictable flank wear and longer effective edge life under typical steel cutting conditions. The coated carbide microstructure is engineered to withstand the heat and friction associated with ISO P materials, so machining cycles remain consistent. The integrated MP5 chipbreaker promotes short, controllable chips that reduce the risk of built-up edge and improve surface finish, which directly contributes to reduced rework and higher throughput on batch runs. Robust geometry for repeatable performance and edge strength A triangular 60° form with a 1.6 mm corner radius and a 0° (negative) relief angle provides a secure seat in standard toolholders and a strong cutting edge that resists chipping. The geometry supports heavier feeds and interrupted cuts while maintaining dimensional accuracy. For operations that demand repeatability, the combination of form and radius ensures each indexed edge performs predictably, reducing tool-change frequency and stabilising cycle times. Application focus: optimised for steel (ISO P) This insert is specified for steel machining according to ISO classifications and is particularly suitable where balanced wear resistance and toughness are required. The WPP10G grade is tuned to handle the thermal and mechanical conditions typical for unalloyed and alloyed steels, providing dependable performance across a wide range of workpiece hardnesses. The insert’s features are intended to simplify process planning and reduce the need for extensive trial-and-error cutting tests. Practical benefits: indexing, tolerance and series advantages As an indexable insert in the Tiger-tec Gold series, the design emphasises economical tool use: multiple cutting edges per insert, straightforward indexing and compatibility with established TNMG toolholders. The tolerance class M supports consistent clamping and repeatability, which is a practical advantage for serial production. The overall package from Walter Tools is geared towards lowering unit machining costs by extending life per edge and reducing unscheduled downtime. The TNMG220416-MP5 WPP10G is a compact solution for workshops seeking dependable finishing and semi-finishing performance. Request matched cutting data and delivery through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application support and fast processing Technical data Article number: TNMG220416-MP5-WPP10G-WALTER SKU: TNMG220416-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte TNMG220416-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Facts Inscribed circle / size: 22 mm Thickness: 4 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Special features Series: Tiger-tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP5 Execution: G Material application: steel (ISO P) ISO designation: TNMG220416-MP5 WPP10G FAQ What materials is this insert suitable for? The TNMG220416-MP5 WPP10G from Walter Tools is designed primarily for steel machining in accordance with ISO P and performs well on both unalloyed and alloyed steels. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP10G grade improves thermal stability and wear resistance, resulting in longer edge life and more consistent component finish compared with uncoated grades. Why is the 1.6 mm corner radius important? A 1.6 mm corner radius increases edge strength and distributes cutting forces over a larger area, which helps to avoid premature chipping and supports stable machining under moderate to heavy feed conditions. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker is optimised for steel; it produces short, manageable chips that enhance chip evacuation and reduce the likelihood of chip-related surface defects. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Walter Tools is mentioned for descriptive purposes only; there is no affiliation implied between Metav Werkzeuge and Walter Tools. The offered article is an original factory-new product of Walter Tools.
TNMG220416-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a proven combination of high process stability and broad material flexibility thanks to the Tiger·tec Gold grade and the MP5 chipbreaker, delivering consistent surface quality and long tool life; order the insert directly via Metav Werkzeuge or ask our consultants for selection support. TNMG220416‑MP5 WPP20G Turning insert — Tiger·tec Gold grade, MP5 chipbreaker — Walter Tools The TNMG220416‑MP5 WPP20G is a triangular indexable turning insert optimised for reliable machining of steel components, offering robust chip control and consistent edge life. Tiger·tec Gold coated carbide grade WPP20G MP5 chipbreaker for controlled chip formation Triangular 60° form with 1.6 mm corner radius Negative 0° relief for secure roughing operations Consistent performance for steel machining The combination of the Tiger·tec Gold coating and the WPP20G grade provides a balance of wear resistance and toughness tailored to ISO P materials (steel). The advanced coating reduces flank wear at elevated cutting temperatures, which translates into longer edge life and fewer tool changes. As a result, production runs benefit from improved uptime and steady surface finish, particularly in mixed-production environments where repeatability is essential. Predictable chip control and process stability The MP5 chipbreaker is engineered to produce short, manageable chips across a wide range of cutting conditions. Coupled with the negative 0° relief geometry, the insert delivers secure engagement in heavier passes and reduced tendency to chatter. This combination improves process stability, reduces vibration-related rejects and can contribute to faster cycle times through consistent material removal. Efficient geometry for versatile applications The triangular shape (60°) and 1.6 mm corner radius give the insert a practical balance between strength and edge accessibility. The 60° form provides multiple usable edges per indexable insert, improving cost-efficiency through rapid re-indexing. The grade’s formulation and the MP5 chip control make the insert suitable for a range of roughing and semi-finishing tasks in unalloyed and alloyed steels, where reliable dimensional control and tool life are priorities. Practical guidance and selection support The insert is specifically specified for ISO P workpieces (steel) and is not indicated for materials outside this designation unless verified. For customers planning process changes or seeking cutting-parameter recommendations, technical advice is available to match feed, speed and depth of cut to the Tiger·tec Gold performance characteristics. This support aids in reducing trial-and-error and optimising the balance between productivity and component quality. For tailored advice and immediate availability of the TNMG220416‑MP5 WPP20G, contact Metav Werkzeuge for expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMG220416-MP5-WPP20G-WALTER Designation: TNMG220416-MP5 ISO designation: TNMG220416-MP5 WPP20G Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Insert size: 22 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Tolerance class: M Form: Triangular 60° Special features Coated carbide (Tiger·tec Gold) Chipbreaker: MP5 Suitable for steel (ISO P) Triangular 60° geometry Reliable chip control and process stability FAQ What materials is this insert designed for? The TNMG220416‑MP5 WPP20G is formulated for ISO P materials and is optimised for machining steel; the Walter Tools Tiger·tec Gold grade provides heat-resistant performance in this material group. How does the MP5 chipbreaker improve machining? The MP5 chipbreaker on this turning insert promotes short, controllable chips and contributes to stable cutting conditions, reducing the risk of built-up edge and improving surface consistency. What is the benefit of the negative 0° geometry? Negative 0° relief enhances edge strength and allows secure engagement during heavier cuts, improving process stability for roughing and interrupted cuts with the TNMG220416‑MP5 insert. How many cutting edges are available per insert? The triangular 60° form provides multiple usable cutting edges; indexing the insert restores a fresh edge quickly, supporting economical tool usage in production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand‑new goods from the manufacturer.
TNMG220416-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and an optimised RP5 chipbreaker for reliable steel machining and predictable tool life; order or request application advice via Metav Werkzeuge for a fast, tailored solution. TNMG220416‑RP5 WPP05G Turning insert for steel — Tiger‑tec Gold, triangle 60°, 1.6 mm corner radius by Walter Tools TNMG220416‑RP5 WPP05G is a triangular indexable turning insert engineered for steel machining, combining Walter Tools' Tiger‑tec Gold coating with an RP5 chipbreaker for stable chip control and extended performance Tiger‑tec Gold coating for long tool life Optimised RP5 chipbreaker for steel machining Triangle 60° form with 1.6 mm corner radius Engineered for dependable steel cutting and long tool life The combination of Tiger‑tec Gold coating and the WPP05G grade delivers high process security when machining steels (ISO group P). The advanced coating system reduces flank and crater wear, enabling more consistent cutting performance under typical heat and chip‑formation conditions encountered with unalloyed and alloyed steels. The integrated RP5 chipbreaker is tuned to produce short, controllable chips in finishing and medium cutting modes, which reduces machine interruptions and supports higher productivity. This results in fewer tool changes and a more economical production flow for turning operations. Geometry and edge preparation that ensure repeatable surface quality The triangular 60° insert shape with a 1.6 mm corner radius provides a robust cutting edge for stable engagement and predictable tool life. The 0° negative rake angle increases edge strength for interrupted cuts and demanding turning tasks, while the plate thickness (code 04) contributes to torsional stiffness in the toolholder. Together, these geometric decisions favour dimensional stability and surface finish; the insert's form reduces vibration sensitivity and helps maintain repeatable results across batch runs. The result is a reliable compromise between toughness and cutting precision for everyday workshop and production use. Application focus and practical benefits for production shops Designed specifically for machining steel, this insert suits a wide range of turning applications from light finishing to moderate roughing where consistent chip control and edge life are priorities. The RP5 chipbreaker promotes secure evacuation of chips, lowering the risk of chip pack‑up and tool damage. For operations seeking reduced downtime and predictable cycle times, the grade's wear behaviour provides a clear cost‑benefit through longer intervals between indexings or replacements. For newcomers to insert selection: ISO group P denotes suitability for steel; matching toolholder geometry and cutting data to this insert ensures the best balance of life and surface quality. For tailored application guidance on the Walter Tools Tiger‑tec Gold TNMG220416‑RP5 WPP05G turning insert or to arrange supply in suitable quantities, contact Metav Werkzeuge for expert advice and swift order handling Technical data SKU: TNMG220416-RP5-WPP05G-WALTER Name: TNMG220416-RP5 WPP05G Manufacturer: Walter Tools Product type: Turning insert (indexable) Series: Tiger‑tec Gold Grade: WPP05G Shape: Triangle 60° Corner radius: 1.6 mm Rake angle: 0° (negative) Facts Size: 22 mm Thickness: 4 mm (code 04) Tolerance class: M Chipbreaker: RP5 Material application: Steel (ISO P) Special features Coating technology: Tiger‑tec Gold (coated carbide) Optimised chip control with RP5 Suitable for unalloyed and alloyed steels Robust edge geometry for interrupted cuts Series designation: Tiger‑tec Gold FAQ What materials is this insert intended for? The TNMG220416‑RP5 WPP05G is specified for machining steels (ISO group P), covering unalloyed and alloyed steel grades. How does the RP5 chipbreaker affect chip formation? The RP5 chipbreaker on the Walter Tools insert shapes chips into short, controllable segments, improving evacuation and reducing the risk of chip entanglement. Which geometrical features improve stability in turning operations? The triangle 60° form and 1.6 mm corner radius increase edge strength and reduce vibration sensitivity, while the 0° negative rake enhances robustness for interrupted cuts. Is this insert suitable for finishing and medium roughing? Yes, the WPP05G grade with Tiger‑tec Gold coating balances wear resistance and toughness, making it suitable for finishing and moderate roughing in steel. What does the grade designation WPP05G indicate? WPP05G denotes a Walter Tools coated carbide grade within the Tiger‑tec Gold family, optimised for steel machining with reliable wear characteristics. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
TNMG220416-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
High-performance turning results from the combination of Tiger·tec Gold coating, the WPP10G grade and the RP5 chipbreaker: extended tool life, stable chip control and reliable performance in steel machining. Order the TNMG220416-RP5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. TNMG220416-RP5 WPP10G indexable turning insert, RP5 chipbreaker, for steel — Walter Tools A TNMG220416-RP5 WPP10G indexable turning insert engineered for robust steel machining and consistent chip formation with Tiger·tec Gold coated carbide. Tiger·tec Gold coating for wear resistance RP5 chipbreaker for controlled chip formation 60° triangle geometry for versatile turning 1.6 mm corner radius for stable cutting High performance for steel turning with controlled chips The coated carbide grade WPP10G in the Tiger·tec Gold series delivers a balance of wear resistance and toughness optimised for steel (ISO P). Together with the RP5 chipbreaker, the insert produces short, controllable chips under typical cutting conditions, which reduces interruptions and improves process reliability. The 0° rake (negative) geometry supports heavy-duty engagement and helps maintain a stable cutting edge during interrupted cuts, while the triangle 60° form offers three usable cutting corners for economical indexation. These technical choices translate into measurable improvements in uptime and reproducible part quality. Consistent surface finish and longer tool life for production environments The combination of grade and geometry yields improved surface finishes and extended service intervals on production runs. The 1.6 mm corner radius provides an effective compromise between strength and form accuracy, reducing the likelihood of edge chipping in continuous and semi-continuous turning tasks. As a result, machining cycles benefit from fewer insert changes and more consistent dimensions, which supports efficient shop-floor workflows and predictable machining costs. The insert’s design supports a variety of common turning operations on steel, contributing to higher machine utilisation and process stability. Practical fitment and specification clarity for toolroom planning The insert is designated TNMG220416-RP5 and is supplied in the WPP10G grade, size code 22 with a thickness code 04, tolerance class M and the RP5 chipbreaker. These clear identifiers simplify toolholder selection and spare-part management. The triangular geometry with a 60° included angle provides flexibility in fixture choices and enables multiple re-indexings per insert. For procurement and inventory planning, the technical marking and series affiliation make cross-referencing straightforward when compiling tooling lists or specifying replacements in maintenance protocols. Contact Metav Werkzeuge for ordering and technical advice on the TNMG220416-RP5 WPP10G; call +49 2822 7131930 or email info@metav-werkzeuge.com for rapid delivery and application guidance. Technical data Article number: TNMG220416-RP5-WPP10G-WALTER Name: Drehwendeschneidplatte TNMG220416-RP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger·tec Gold Grade: WPP10G Numbers / Core technical data Inscribed circle / size code: 22 Corner radius: 1.6 mm Thickness code: 04 Rake angle: 0° (negative) Geometry: 60° triangle Tolerance class: M Designs / Special features Chipbreaker: RP5 Coating/sort: Tiger·tec Gold, coated carbide (WPP10G) Suitable material group: Steel (ISO P) Execution: G Identification: TNMG220416-RP5 (base designation) FAQ What materials is this insert suitable for? The TNMG220416-RP5 WPP10G is formulated for machining steel (ISO P); the Tiger·tec Gold grade and RP5 chipbreaker are tuned for typical heat and chip behaviour when turning steel. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the TNMG220416-RP5 WPP10G promotes short, controllable chips and consistent chip evacuation, which improves process reliability and reduces manual intervention. Can the insert be used for interrupted cuts? The negative 0° rake and the robust WPP10G grade of the TNMG220416-RP5 WPP10G provide the edge strength necessary to handle many interrupted turning scenarios in steel. What does the size code 22 and thickness code 04 mean for holders? Size code 22 and thickness code 04 identify the insert form and stack-up for matching standard toolholders; these designations facilitate correct holder selection and quick replacement planning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The mentioned brand names are used exclusively for explanation; there is no affiliation between our company and the brands. The offered item is an original, factory-new product of the manufacturer.
TNMG220416-RP5 WPP20G G Wendeplatten - Walter Tools
Take advantage of the high wear resistance and predictable chip control of this Tiger·tec Gold grade insert; the combination of a robust 1.6 mm corner radius and RP5 chipbreaker supports stable, productive steel turning. Order directly via Metav Werkzeuge or contact our consultants for application advice. TNMG220416-RP5 WPP20G — Indexable turning insert, Tiger·tec Gold coating (Walter Tools) TNMG220416-RP5 WPP20G is a triangular indexable insert engineered for ISO P (steel) turning applications, featuring the RP5 chipbreaker and a 1.6 mm corner radius for reliable edge life and consistent metal removal. Tiger·tec Gold coated carbide Triangle 60° geometry 1.6 mm corner radius for edge strength Negative 0° relief for stable cutting High wear resistance for demanding steel turning The Tiger·tec Gold series and the WPP20G grade provide a coated carbide chemistry optimised for steel (ISO P) applications, delivering improved wear resistance and extended tool life under common turning conditions. This combination reduces flank wear and supports longer production runs, which translates into fewer index changes and higher cumulative productivity. The engineered coating architecture controls thermal effects during cutting, helping to maintain a predictable cutting edge and consistent part quality in serial machining. Geometry and chip control that improve surface quality A triangle 60° geometry with an RP5 chipbreaker gives a robust seating and secure clamping, while the chipbreaker shape is designed to produce controllable chip forms when machining steels. The 1.6 mm corner radius increases edge strength and reduces the risk of chipping at interrupted cuts, and the negative 0° relief promotes stable cutting action with reduced tendency for built-up edge on many steels. Explaining briefly: a chipbreaker shapes and fractures chips to ensure safe evacuation and consistent cutting forces, which directly contributes to a consistent surface finish and repeatable cycle times. Practical advantages for production workshops Dimensionally specified for reliable insertion and re-indexing, the insert’s tolerance class M and the standard format ensure interchangeability in common toolholders. The designation and format support efficient inventory management and quick tool changes during shift operations. Built for steels, the insert offers a balance of process security and economical performance that suits jobbing and light-series production alike, helping maintain throughput without sacrificing component finish. For production-focused turning with Walter Tools’ Tiger·tec Gold performance, contact Metav Werkzeuge to clarify suitability, specify quantities or request tailored cutting-parameter recommendations via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data SKU: TNMG220416-RP5-WPP20G-WALTER Designation: TNMG220416-RP5 WPP20G Series: Tiger-tec Gold Grade: WPP20G Manufacturer: Walter Tools Core dimensions Inscribed circle: 22 mm Corner radius: 1.6 mm Relief angle: 0° (negative) Plate thickness designation: 04 Geometry: Triangle 60° Tolerance class: M Materials & features Suitable material group: Steel (ISO P) Chipbreaker: RP5 Coating technology: Tiger·tec Gold (coated carbide) Execution: G Plate size designation: 22 Plate form: Dreieck 60° FAQ What materials is this insert intended for? This insert is designed primarily for steel machining (ISO P); the WPP20G grade and Tiger·tec Gold coating are tuned to common steel cutting conditions. What does the WPP20G grade offer? WPP20G is a Walter Tools coated-carbide grade in the Tiger·tec Gold family that emphasises wear resistance and broad applicability across steel categories while maintaining edge stability. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker is shaped to produce controllable chip forms when turning steels, improving chip evacuation and reducing cutting-force peaks for steadier machining. Is the negative 0° relief advantageous? A negative 0° relief increases edge strength and stability under heavier cutting, making the insert suitable for applications where a sturdy cutting edge is required rather than a highly sheared action. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and brand names remain the property of their respective owners. The named product is an original, factory-new item from the manufacturer.
TNMG220416-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise RP5 chip control and the economic lifecycle of a coated carbide insert for reliable turning of steel; order the insert directly via Metav Werkzeuge or consult our technical advisers for cutting data and application support. TNMG220416-RP5 WPP30G indexable turning insert — Walter Tools, for steel (ISO P), RP5 chipbreaker The TNMG220416-RP5 WPP30G is an indexable turning insert designed for efficient steel machining, combining the Tiger·tec Gold coating technology with a robust RP5 chipbreaker for consistent chip control in general turning operations. Tiger·tec Gold coating for long tool life RP5 chipbreaker for stable chip formation Suitable for ISO P (steel) applications Triangular 60° shape with 1.6 mm corner radius Proven cutting performance with Tiger·tec Gold for steel The insert’s most significant advantage is the Tiger·tec Gold coating paired with the WPP30G grade, a combination engineered for balanced wear resistance and toughness when machining steel (ISO P). The coating reduces abrasion and adhesion on the cutting edge, which extends productive tool life and reduces downtime for indexable insert changes. As a coated carbide solution, the insert supports repeatable results across series production, making it a rational choice where consistent component quality and cost-efficiency are priorities. The RP5 chipbreaker actively shapes chips to avoid interruptions, supporting a steady material removal rate and predictable production planning. Consistent surface quality and reliable edge life for serial production The triangular 60° geometry offers economical use of multiple cutting edges and a compact footprint for stable clamping in common turning toolholders. The corner radius 1.6 mm provides a compromise between strength and surface finish, enabling both moderate roughing and finishing passes without compromising edge stability. The negative 0° (negative) rake improves robustness under heavier depths of cut and is less susceptible to built-up edge when machining steels with variable alloying. These characteristics translate into fewer tool changes and more predictable process windows, which supports throughput and process reliability in medium- to high-volume machining. Practical application notes for efficient turning Designed for the machining of steel, the insert suits a wide range of general-purpose turning tasks where balanced productivity and tool life are required. The RP5 chipbreaker is optimised for controlled chip breaking in typical steel grades, reducing the risk of long, tangled chips and improving operator safety. The insert dimensions (inscribed circle 22 mm and thickness 04) allow compatibility with standard toolholder systems that accept TNMG indexable inserts. Select feeds and cutting speeds according to material and machine rigidity; the coated grade prioritises steady performance rather than extreme high-speed finishing. For customers seeking ease of process implementation, the insert’s tolerance class M ensures interchangeability and predictable mounting geometry. For tailored recommendations on cutting data or to secure supply of the Walter Tools TNMG220416-RP5 WPP30G insert, contact Metav Werkzeuge for expert advice and order arrangements via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: TNMG220416-RP5-WPP30G-WALTER Manufacturer: Walter Tools Product type: indexable turning insert Designation: TNMG220416-RP5 ISO designation: TNMG220416-RP5 WPP30G Facts Insert shape: Triangular 60° Inscribed circle: 22 mm Thickness: 04 Corner radius: 1.6 mm Rake: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP5 Material: coated carbide Application: suitable for steel (ISO P) FAQ What steels is this insert suited for? The WPP30G grade on the TNMG220416-RP5 is formulated for ISO P steels, covering unalloyed and many alloyed steels with a balanced combination of wear resistance and toughness. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert shapes and controls chips to reduce long, uncontrolled chips, improving process stability and operator safety during turning. Can the insert be used for finishing passes? Yes; with its 1.6 mm corner radius and coated grade, the insert supports moderate finishing operations while maintaining edge strength for intermittent cuts. How many cutting edges are available per insert? The triangular 60° geometry provides multiple indexed cutting edges; rotating the insert extends overall tool life and reduces tooling cost per edge. Is the coating suitable for elevated cutting speeds? The Tiger·tec Gold coating enhances wear resistance and thermal stability, favouring reliable performance; cutting speeds should be selected based on workpiece steel grade and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are cited here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
TNMG270608-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold performance and the WPP20G grade for consistent chip control and long tool life; the robust MP5 chipbreaker and triangle geometry deliver reliable productivity in steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG270608-MP5 WPP20G — Indexable turning insert for steel, Tiger·tec Gold | Walter Tools The TNMG270608-MP5 WPP20G is an indexable turning insert engineered for productive steel machining, combining a tough coated carbide grade with a controlled-chip MP5 geometry for versatile external turning Tiger·tec Gold coating for extended tool life MP5 chipbreaker for consistent chip control Triangle 60° geometry for versatile turning Optimised for steel machining (ISO P) Boosted productivity with durable coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade provides a high level of wear resistance and thermal stability under typical steel cutting conditions. This results in longer tool life and fewer insert changes, which supports a steady production rhythm and reduces downtime. The coated carbide composition is optimised for the heat and chip characteristics of steels, so the insert maintains cutting-edge integrity over longer cutting intervals and offers predictable performance in medium to high cutting speeds. Stable cutting behaviour through geometry and chip control The MP5 chipbreaker is designed for reproducible chip formation when machining steels classified in ISO group P, producing short, manageable chips under a range of cutting parameters. The triangle 60° insert form delivers three cutting edges per indexable insert, improving cost efficiency, while the 0° (negative) free angle and a 0.8 corner radius increase robustness for heavier cuts and interrupted turning. Explaining the terms: a negative free angle makes the insert more rigid at the cutting edge, helping to withstand shock loads; the corner radius influences surface finish and component strength at the machined edge. Selection guidance and process assurance for workshop use Tolerance class M, the established geometry and the series’ focus on steel make this insert a practical choice for general turning operations where consistent surface quality and tool life are required. The insert’s designation and chipbreaker allow for straightforward parameter setting on lathes and turning centres; when optimising feeds and speeds, expect improved process security and repeatability. For complex parts or specialised materials outside standard steel, technical advice is available to match the right insert grade and machining strategy to the application. For tailored advice on Walter Tools Tiger‑tec Gold inserts and to discuss compatibility with specific machines or components, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: TNMG270608-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG270608-MP5 WPP20G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Brand: Walter Tools Series/grade: Tiger‑tec Gold / WPP20G Core technical data Insert size: 27 Thickness code: 06 Corner radius: 0.8 Included angle: 60° Free angle: 0° (negative) Tolerance class: M Special features Chipbreaker: MP5 Material group: P (steel) Coating technology: Tiger·tec Gold Execution: G Plate form: Triangle 60° Designation: TNMG270608-MP5 WPP20G FAQ Which materials is this insert primarily suited to machine? The TNMG270608-MP5 WPP20G is designed for machining steels (ISO group P), with the WPP20G grade optimised for the heat and chip formation characteristics of unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating bring? Tiger·tec Gold enhances thermal resistance and wear performance on Walter Tools inserts, allowing higher cutting speeds and extended tool life compared with uncoated grades, which supports consistent productivity. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker produces reliably broken chips and stable material flow during cutting, reducing the risk of long, entangling chips and simplifying chip handling in turning operations. Why choose a triangle 60° insert geometry? Triangle 60° inserts provide three usable cutting edges per insert, improving cost efficiency and versatility for various turning tasks; the geometry also supports good access to contours and profiles. What does the 0° (negative) free angle mean for daily use? A 0° (negative) free angle increases edge support and resistance to impact, making the insert suitable for heavier cuts and interrupted cuts where edge robustness is important. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanation only; there is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer. The Walter AG (marketed as Walter Tools), headquartered in Tübingen, is part of the Sandvik group and is a leading manufacturer of precision tools for metalworking.
TNMG270612-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of stable chip formation, longer edge life and a coating optimised for abrasive materials to boost throughput in cast iron turning. Benefit from the Tiger‑tec Silver grade WKK20S for consistent results and order the insert directly via Metav Werkzeuge or consult our specialists for application support. TNMG270612‑MK5 WKK20S – Indexable turning insert for cast iron (Tiger‑tec Silver) by Walter Tools The TNMG270612‑MK5 WKK20S is a triangular 60° indexable turning insert designed for productive machining of cast iron components, combining a robust chipbreaker with a coating tuned for abrasive wear Tiger‑tec Silver coating technology WKK20S grade optimised for cast iron Triangle 60° insert with 1.2 mm nose radius 0° negative rake for stable cutting Increased productivity through abrasion‑resistant grade and geometry The TNMG270612‑MK5 WKK20S is developed to address the specific challenges of cast iron machining. The WKK20S grade of the Tiger‑tec Silver family is a coated carbide formulation that resists abrasive wear and maintains edge integrity in interrupted and breaking‑chip conditions. The triangular 60° geometry yields three usable cutting edges per index, reducing tool change frequency and supporting higher machine uptime. For production environments where consistent cycle times and fewer regrinds matter, this insert offers a clear reduction in downtime and a measurable uplift in process efficiency. Consistent surface quality and controlled chips for safer productivity The MK5 chipbreaker is tailored to the short, brittle chips typical of cast iron; it supports reliable chip segmentation and evacuation, lowering the risk of chip entanglement and tool nose rubbing. Combined with the 1.2 mm nose radius, the insert balances edge strength with the ability to produce stable surface finishes on turned components. The 0° negative rake increases cutting edge robustness during heavy cuts, resulting in fewer rejects and less downstream finishing. This combination translates into lower machining variability and reduced rework rates. Lower tooling costs through modern coating and edge stability The Tiger‑tec Silver coating improves resistance to thermal and abrasive wear, which extends effective tool life under typical cast iron conditions. A longer‑lasting cutting edge reduces the frequency of indexing and regrinding, improving cost per part and contributing to predictable production planning. Because the sort is engineered for abrasive materials, it helps avoid premature microchipping and keeps process windows stable — a pragmatic advantage for batch or continuous manufacturing where tool‑life consistency directly affects overall cost efficiency. Integration into standard turning systems and clear application scope The insert is offered in the common TNMG format and is compatible with a wide range of toolholders that accept triangular 60° inserts, simplifying inventory and holder management. Marked by tolerance class M and the MK5 chipbreaker, the geometry and mechanical tolerances support repeatable seating and stable clamping forces. The grade is explicitly suited to ISO group K (cast iron) applications, making material selection straightforward for planning and programming. Clear material assignment reduces trial‑and‑error and accelerates the qualification of cutting data for production runs. Discuss machining requirements with Metav Werkzeuge to select the optimal Walter Tools Tiger‑tec Silver inserts for cast iron operations; Metav Werkzeuge can advise on grade selection and holder compatibility Technical data Article number: TNMG270612‑MK5‑WKK20S‑WALTER Manufacturer: Walter Tools Product type: Indexable turning insert Facts Insert size: 27 Nose radius: 1.2 mm Plate form: Triangle 60° Rake: 0° negative Tolerance class: M Grade: WKK20S Special features Series: Tiger‑tec Silver Chipbreaker: MK5 Coating: coated carbide Material suitability: cast iron (ISO K) Execution: G Plate thickness code: 06 FAQ What materials is this insert intended for? The TNMG270612‑MK5 WKK20S insert from Walter Tools is specifically designed for cast iron machining (ISO group K), with a grade and chipformer matched to abrasive, breaking chips How does the MK5 chipbreaker affect machining? The MK5 chipbreaker promotes short, controlled chip formation and reliable evacuation when turning cast iron, which supports stable surface finish and reduces the risk of chip interference What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances abrasion resistance and thermal stability, extending edge life under the abrasive conditions typical of cast iron turning Manufacturer/Responsible: Walter AG (Walter Tools); Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and imply no affiliation between our company and the manufacturers mentioned.
TNMG270612-MP5 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, the Tiger·tec Gold coated grade and precise chip control for efficient steel turning. Order the TNMG270612-MP5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed TNMG270612-MP5 WPP10G indexable turning insert — Tiger·tec Gold, MP5 chipbreaker (Walter Tools) TNMG270612-MP5 WPP10G is an indexable turning insert designed for dependable steel machining with a Tiger·tec Gold coating and an MP5 chipbreaker TNMG270612-MP5 WPP10G by Walter Tools Tiger·tec Gold coating for extended life MP5 chipbreaker for reliable chip control Triangle 60° form with 1.2 mm corner radius Increased uptime through proven grade and coating The combination of the WPP10G grade and the Tiger·tec Gold coating delivers a reliable balance of wear resistance and toughness specifically for the machining of steel (ISO P). The coated carbide substrate is optimised to withstand the thermal and mechanical stresses typical for steel turning, resulting in reduced flank wear and longer edge life. With the MP5 chipbreaker tuned for stable chip formation, cycle times become more predictable and insert changes are less frequent, supporting uninterrupted production runs and lower overall tooling cost. Secure geometry for repeatable results The triangular outline with a triangle 60° geometry and a 1.2 mm corner radius gives a robust cutting edge and multiple indexable lives per insert. The 0° (negative) rake configuration increases edge strength for heavy cuts and interrupted cuts, improving stability where rigidity and reproducibility matter. The specified form factor and tolerance class ensure consistent clamping and repeatable positioning in standard toolholders, which shortens setup time and reduces scrap caused by inconsistent insert seating. Practical benefits for workshop and production use Choosing this indexable insert from the Tiger·tec Gold series supports higher productivity by combining a universal grade with process security. The plate is particularly suited to general steel applications and designed to offer simple grade allocation for diverse turning tasks. For production environments where predictable tool life and consistent surface finish are priorities, the WPP10G grade and the MP5 chipbreaker provide a pragmatic balance between performance and operational robustness, delivering dependable component quality and efficient machining cycles. For application-specific selection or delivery details of Walter Tools TNMG270612-MP5 WPP10G inserts, contact Metav Werkzeuge for expert advice and availability information Technical data Article number: TNMG270612-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte TNMG270612-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Designation: TNMG270612-MP5 WPP10G Series: Tiger·tec Gold Core data Size: 27 Thickness: 06 Corner radius: 1.2 Free cutting angle: 0° (negative) Shape: Triangle 60° Tolerance class: M Execution: G Chipbreaker: MP5 Special features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Material application: Steel (ISO P) Baureihe: Tiger·tec Gold Sortenbeschreibung: Coated hard metal for steel machining FAQ What materials is this insert suitable for? The TNMG270612-MP5 WPP10G insert is specified for steel applications (ISO P); the WPP10G grade and Tiger·tec Gold coating are tuned for the thermal conditions and chip formation typical when machining steels. How does the MP5 chipbreaker affect performance? The MP5 chipbreaker delivers controlled chip formation and evacuation during turning, supporting consistent surface finish and reducing the risk of built-up edge, especially when machining steels with varying machinability. What is the advantage of the 60° triangular form and 1.2 mm radius? The triangle 60° geometry provides multiple usable cutting edges per insert and a rigid cutting profile; the 1.2 mm corner radius increases edge strength for heavier cuts and improves tool life in robust production applications. Is this insert compatible with standard toolholders? The TNMG270612-MP5 WPP10G follows common indexable insert dimensions and tolerance class M, ensuring compatibility with standard TNMG toolholders designed for triangular inserts. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise from the manufacturer (Walter Tools).
TNMG270612-MP5 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a precise 60° triangular geometry and the MP5 chipbreaker for robust, economical steel machining; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TNMG270612-MP5 WPP20G — Triangular indexable turning insert, Tiger‑tec Gold coating (for Steel) by Walter Tools The TNMG270612-MP5 WPP20G is a triangular indexable turning insert with a Tiger‑tec Gold coated, coated‑carbide grade optimised for the machining of steel under ISO P classifications Tiger‑tec Gold coated for high wear resistance 60° triangular shape, 1.2 mm corner radius MP5 chipbreaker for controlled chip formation 0° negative rake for stable cutting performance Durable coating that extends productive tool life The combination of the Tiger‑tec Gold coating and the WPP20G grade delivers consistent wear resistance and reliable edge integrity when machining steel. This coated carbide technology is designed to withstand the typical heat and chip formation that occur in steel turning, reducing flank wear and preserving the cutting edge. As a result, tool life is extended and changeover frequency is reduced, supporting a more productive turning process with fewer interruptions. Geometry engineered for stability and surface quality A 60° triangular configuration with a 1.2 mm corner radius and a 0° negative rake provides a stable engagement in the cut and predictable strength at the cutting edge. The MP5 chipbreaker is optimised to produce short, controllable chips in a range of steel grades, which improves surface finish and reduces risk of entanglement. These geometric choices combine to offer dimensional stability and repeatable results on serial production runs. Designed for steel applications under ISO P standards Rated for the ISO P material group, this insert is targeted at unalloyed and alloyed steel machining where a balance of toughness and wear resistance is required. The coating and chipforming geometry make the insert suitable for operations that demand both consistent surface quality and economical material removal. For customers less familiar with ISO designations: ISO P denotes inserts tailored to the thermal and metallurgical behaviour of steels during cutting. Process benefits, compatibility and operational gains Using a robust, coated grade in a common TNMG format contributes to reduced tooling costs per part through longer life and fewer interruptions. The insert’s standard size and form factor ensure compatibility with widely used toolholders that accept TNMG‑style inserts, simplifying inventory and holder management. Combined with Walter Tools’ focus on process security and stable cutting edges, this turning solution supports steady production and reliable part quality. Contact Metav Werkzeuge for application guidance and to secure Tiger‑tec Gold TNMG inserts for demanding steel turning operations Technical data SKU: TNMG270612-MP5-WPP20G-WALTER Article designation: TNMG270612-MP5 WPP20G Product type: Indexable turning insert Facts Shape: Triangle 60° Corner radius: 1.2 mm Insert size: 27 Thickness: 06 Rake: 0° (negative) Tolerance class: M Special features Coating technology: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP5 Material application: Steel (ISO P) Series: Tiger‑tec Gold Execution: G FAQ What materials is this insert suitable for? The TNMG270612-MP5 WPP20G is intended for steel machining and is specified for the ISO P material group; the WPP20G grade and Tiger‑tec Gold coating are optimised for steels. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this TNMG insert produces short, controlled chips in steel turning, improving surface finish and reducing the need for additional chip control measures during production. Is the geometry suitable for demanding, repeatable production? Yes. The 60° triangular form with a 1.2 mm corner radius and a 0° negative rake delivers edge strength and stable cutting, contributing to repeatable dimensional results in serial turning operations. Which toolholders are compatible with this insert format? The TNMG form factor is a standard indexable insert size; compatibility should be checked against toolholder specifications, but this TNMG270612‑style insert fits holders designed for TNMG inserts and similar clamping systems. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG270612-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance and reliable chip control to maintain consistent cycle times and surface quality in steel turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. TNMG270612-MP5 WPP30G indexable turning insert for steel, Tiger·tec Gold (Walter Tools) The TNMG270612-MP5 WPP30G is an indexable turning insert engineered for steel turning (ISO P), combining a Tiger·tec Gold coated grade with an MP5 chipbreaker to secure stable chip formation and extended tool life Tiger·tec Gold coated carbide WPP30G MP5 chipbreaker for controlled chip formation Triangular 60° insert with 1.2 mm corner radius Designed for steel machining (ISO P) Boosted productivity through coating and chip control The combination of the Tiger·tec Gold coating and the WPP30G grade delivers a balanced mix of wear resistance and toughness that supports elevated cutting parameters in steel machining. The MP5 chipbreaker is tailored to promote stable, short chips under typical turning conditions, which reduces interruptions from chip entanglement and assists in maintaining consistent cycle times. For production contexts where repeatable results matter, this coated carbide grade helps to reduce tool change frequency and supports continuous operation with predictable performance. Consistent surface finish and reliable edge strength for steel Built for the ISO P material group, the insert geometry with a triangular 60° form and a corner radius 1.2 mm offers a compromise between edge strength and surface quality. The nominal 0° (negative) clearance provides robust cutting behaviour for roughing and semi-finishing passes in a wide range of steels. The grade composition is optimised for the heat and chip formation typical of steel turning, so customers will observe regular surface finishes and a stable tool life when operating within recommended parameters for medium to heavy cuts. Practical design benefits for workshop efficiency The insert fits standard TNMG toolholder interfaces, allowing straightforward replacement and inventory management in mixed-shop environments. The compact geometry and the combination of coating and chipbreaker reduce secondary operations linked to poor chip control and surface inconsistencies, supporting a more efficient workflow and lower reworking rates. Documentation-friendly ISO designation and the Walter Tools series association simplify tooling specification and procurement for purchasing and process engineering teams. Contact Metav Werkzeuge for application-tailored recommendations and to procure the TNMG270612-MP5 WPP30G insert from Walter Tools; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number / SKU: TNMG270612-MP5-WPP30G-WALTER Label: TNMG270612-MP5 WPP30G indexable turning insert (Walter Tools) Product type: Indexable turning insert Manufacturer: Walter Tools UID: TNMG270612-MP5-WPP30G-WALTER Numbers / Core technical data Inscribed circle / size: 27 mm Corner radius: 1.2 mm Plate thickness: 06 Clearance angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Special features / Versions Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: MP5 Material suitability: Steel (ISO P) Designation without grade: TNMG270612-MP5 FAQ What materials is this insert intended for? The TNMG270612-MP5 WPP30G insert is optimised for steel (ISO P) applications and the WPP30G grade is tuned for the heat and chip characteristics of steel machining. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker promotes controlled chip formation during turning, improving machinability and reducing interruptions caused by long or tangled chips when using the TNMG270612-MP5 WPP30G insert. What benefit does the Tiger·tec Gold series provide? In the Tiger·tec Gold series, the coating and substrate combination enhances wear resistance and process stability, which contributes to longer tool life and consistent surface quality with the TNMG270612-MP5 WPP30G. Is the insert compatible with standard TNMG toolholders? Yes, the TNMG270612-MP5 WPP30G follows the TNMG geometry and fits toolholders designed for that insert family, allowing straightforward replacement in existing tool systems. What is the effect of the 1.2 mm corner radius? A corner radius of 1.2 mm balances edge strength and surface finish: it increases robustness for heavier cuts while still delivering good surface quality in finishing passes with the TNMG270612-MP5 WPP30G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
TNMG270612-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the RP5 chipbreaker for durable, predictable steel turning and improved chip control; the triangular 60° form with a 1.2 mm corner radius offers versatile use across roughing and finishing operations. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored cutting data and application advice. TNMG270612-RP5 — TNMG270612-RP5 WPP10G — WPP10G triangular turning insert for steel machining by Walter Tools A TNMG270612-RP5 WPP10G triangular turning insert designed for productive steel turning with robust edge security and consistent chip formation. Tiger·tec Gold coated WPP10G grade RP5 chipbreaker for controlled chips Triangular 60° insert with 1.2 mm radius 0° negative rake for robust turning Increased productivity through advanced coating and grade The Tiger·tec Gold coating combined with the WPP10G grade delivers higher wear resistance and thermal stability when machining steel, which translates to longer tool life and fewer tool changes. The coated carbide substrate helps to maintain a stable cutting edge under the heat and friction typical of steel turning, reducing flank wear. This means more uninterrupted machining time and a more predictable tool-cost-per-part in batch production and continuous-turning operations. Reliable chip control that reduces downtime The RP5 chipbreaker is engineered to produce consistent chip shapes for a wide range of feeds and depths of cut, lowering the risk of chip entanglement and rework. The triangular 60° geometry together with a 1.2 mm corner radius provides flexible positioning for both light finishing and more aggressive passes, while the chipbreaker design assists in evacuating swarf efficiently. Better chip control reduces interruptions and keeps coolant and clamping systems cleaner, supporting smoother process flows. Robust geometry for demanding turning tasks A 0° negative rake offers increased mechanical strength at the cutting edge, improving performance in interrupted cuts and tougher material zones common in steel components. The insert’s tolerance class M and stable form ensure repeatable seating in toolholders and consistent part tolerance over series runs. These characteristics suit workshops that require a dependable insert for a range of turning operations, from medium-finishing to heavier stock removal, without frequent indexing or replacement. For reliable steel turning with the Tiger·tec Gold WPP10G grade and RP5 chipbreaker, contact Metav Werkzeuge for application support or to secure the TNMG270612-RP5 WPP10G from Walter Tools — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: TNMG270612-RP5-WPP10G-WALTER Product type: Drehwendeschneidplatte Brand: Walter Tools Core dimensions Insert form: Dreieck 60° Size: 27 Thickness: 06 Corner radius: 1.2 mm Rake angle: 0° (negative) Special features Grade: WPP10G (Tiger·tec Gold) Chipbreaker: RP5 Coated carbide cutting material Application group: P (steel) Tolerance class: M FAQ What steels is this insert suitable for? The WPP10G grade and Tiger·tec Gold coating are optimised for machining steel (ISO group P), providing balanced wear resistance and toughness for unalloyed and alloyed steels. How does the RP5 chipbreaker improve machining? The RP5 chipbreaker creates controlled chip forms that evacuate reliably, reducing chip handling issues and helping to maintain uninterrupted production runs with the TNMG270612-RP5 WPP10G insert. Can this insert be used for both roughing and finishing? Yes, the triangular 60° geometry and 1.2 mm corner radius allow flexible use across medium-finishing and roughing passes, offering a compromise between edge strength and surface quality. Does the 0° negative rake require special toolholders? Standard turning holders for TNMG-style inserts are suitable; the 0° negative rake enhances edge strength and is compatible with typical clamping systems used in steel turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation; there is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of Walter Tools.
TNMG270612-RP5 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of consistent chip control, Tiger·tec Gold coating and a robust negative geometry to achieve reliable, productive turning operations; order the TNMG270612-RP5 WPP20G insert directly via Metav Werkzeuge or consult the Metav team for application advice. TNMG270612-RP5 WPP20G triangle insert — high-performance coated grade from Walter Tools, designed for steel turning TNMG270612-RP5 WPP20G is a coated carbide triangle insert for general steel machining, offering a balanced mix of wear resistance and toughness for stable production. *High edge stability with Tiger·tec Gold coating *Optimised RP5 chipbreaker for consistent chips *Triangle 60° form for versatile turning operations *Corner radius 1.2 mm for robust edge strength Reliable performance for steel machining with optimised coating The insert is engineered for machining steel (ISO P) and benefits from the Tiger·tec Gold coating technology, which combines a coated carbide substrate with a multi-layer finish to improve thermal resistance and wear behaviour. This results in longer tool life under typical steel cutting conditions and reduced frequency of tool changes, improving machine uptime. The WPP20G grade is described as a universal, slightly wear-resistant option within the Tiger·tec Gold family, providing a sensible compromise between wear resistance and toughness for mixed production batches. Geometry that supports process stability and chip control The triangle 60° form and corner radius 1.2 mm give mechanical rigidity and edge strength when facing interrupted cuts or medium-depth turns. The insert’s RP5 chipbreaker is shaped to produce predictable chip formation in a wide range of feeds, reducing entanglement and improving surface consistency. A negative 0° clearance means the insert is suitable for stable, rigid holders and heavy cuts where a robust cutting edge is required. These geometric choices translate to fewer rejects and consistent part quality in short- to medium-run production. Coating and substrate designed for higher productivity The grade is a coated cemented carbide belonging to the Tiger·tec Gold series; the surface treatment enhances hardness at cutting temperatures and helps maintain a sharp edge for longer. In practice, this means more components per insert and fewer tool change interruptions, which contributes directly to process economy. Where higher cutting speeds and thermal loads occur, the coating’s thermal barrier properties reduce notch wear and flank degradation, thereby extending useful tool life in demanding steel applications. Practical application and handling in production environments The insert is sized for conventional turning toolholders that accept TNMG 27-series inserts and is well suited for medium finishing and roughing tasks on unalloyed and alloyed steels. The balanced grade composition supports a range of feeds and depths of cut without immediate edge failure, making it a pragmatic choice for job shops and production lines seeking reliable throughput. For mounting, standard TNMG clamping systems apply; correct seat cleanliness and torque ensure the negative geometry performs as intended and secures process stability. For tailored recommendations on replacing existing inserts with Tiger·tec Gold WPP20G or to discuss suitable holders and cutting data, contact Metav Werkzeuge for application support and ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data *SKU: TNMG270612-RP5-WPP20G-WALTER Designation: TNMG270612-RP5 WPP20G Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Product type: Drehwendeschneidplatte (turning insert)* Facts *Insert size (inscribed circle): 27 Thickness: 06 Corner radius: 1.2 mm Insert form: Triangle 60° Clearance angle: 0° (negative) Chipbreaker: RP5 Tolerance class: M Material application: Steel (ISO P)* Special features *Coating: Tiger·tec Gold coated carbide Substrate: coated cemented carbide (WPP20G) Optimised chip control for steel machining Balanced wear resistance and toughness for general turning* FAQ What materials is this insert intended for? The TNMG270612-RP5 WPP20G insert is designed primarily for steel machining (ISO P) and performs well on unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the WPP20G grade improves thermal stability and wear resistance, allowing for longer tool life and more consistent component quality in steel turning. Which chipbreaker is fitted and what is its effect? The insert uses the RP5 chipbreaker, which is optimised for consistent chip formation in a variety of feeds, helping to reduce chip-related interruptions and improve surface finish. What does the negative 0° clearance mean for clamping and cutting? A 0° negative clearance requires a rigid clamping system and provides a strong cutting edge suitable for heavier cuts and interrupted machining, enhancing process stability. What corner radius is recommended for robustness and finish? This insert features a 1.2 mm corner radius, offering a robust edge for moderate roughing and finishing operations while contributing to good edge life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer.
TNMG270612-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the RP5 chipbreaker to secure stable chip control and long tool life in steel turning operations; order the insert directly via Metav Werkzeuge or request further technical advice from the consultants. TNMG270612-RP5 WPP30G TNMG270612-RP5 WPP30G turning insert for steel – Walter Tools A TNMG270612-RP5 WPP30G indexable triangle insert designed for productive steel turning with optimised chip evacuation and a robust cutting edge. Tiger·tec Gold coated for long tool life RP5 chipbreaker for stable chip control Triangle 60° form for versatile turning 1.2 mm corner radius for robust edge Higher uptime through coated carbide technology The combination of the Tiger·tec Gold coating and a wear-resistant carbide substrate delivers consistent performance in demanding steel applications. The coating reduces flank wear and enhances thermal stability, which translates into fewer tool changes and longer productive cycles. For workshops and production lines that prioritise reliable machining, this means a measurable reduction in unplanned downtime and more predictable process windows. Precise chip control and improved surface finish Equipped with the RP5 chipbreaker, the insert promotes controlled chip formation and smooth evacuation during turning. Stable chip control reduces the risk of built-up edge and component rework, improving surface quality on turned parts. The triangle 60° geometry supports versatile approach angles, making the insert suitable for a range of roughing and finishing passes while maintaining dimensional consistency. Robust edge and durable geometry for tougher cuts The 1.2 mm corner radius and the 0° negative rake ensure a robust cutting edge that withstands intermittent cutting and moderate interrupted cuts typical in steel machining. This geometry favours process security and repeatability: the cutting edge resists chipping and maintains tolerance adherence over longer tool life, which benefits batch production and mixed-series machining alike. Clear application scope and easy machining decisions Designed for machining steel (designation P), the WPP30G grade is oriented toward a balance between wear resistance and toughness. The grade’s characteristics mean it is particularly suitable where heat generation and typical steel chip behaviour are expected. For engineers and buyers, the result is a straightforward selection rationale: a coated carbide insert that combines wear resistance, stable chip control and broad applicability for steel turning tasks. Contact Metav Werkzeuge to discuss the TNMG270612-RP5 WPP30G Tiger·tec Gold inserts or to obtain tailored cutting data and supply details: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TNMG270612-RP5-WPP30G-WALTER Designation: TNMG270612-RP5 WPP30G Type: Turning insert (indexable insert) Manufacturer: Walter Tools Facts Insert form: Dreieck 60° Corner radius: 1.2 mm Insert size: 27 Thickness: 06 Free rake: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP5 Substrate / material class: coated carbide Application: steel (P) FAQ What materials is this insert suitable for? The TNMG270612-RP5 WPP30G is specified for machining steel (designation P) and is engineered to handle the heat and chip formation typical of steel turning. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the insert reduces flank wear and improves thermal stability, which extends tool life and helps maintain consistent cutting results. Which chipbreaker should be selected for better chip control? The integrated RP5 chipbreaker on this insert is designed for stable chip formation and evacuation during steel turning operations. Can this insert be used for fine finishing operations? Yes; the triangle 60° geometry combined with the 1.2 mm corner radius supports both productive roughing and controlled finishing passes, delivering acceptable surface integrity when cutting parameters are set accordingly. What does the tolerance class M indicate? Tolerance class M refers to the manufacturing tolerance of the insert, ensuring consistent fitting and repeatability in toolholders designed for this type of indexable insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and brand names are the property of their respective owners. Where applicable, the brand Walter Tools is mentioned for identification and explanatory purposes only. The offered item is an original, brand-new product from the manufacturer. The Walter AG brand represents a leading provider of precision tools for metalworking and is part of the Sandvik Group.
TNMG270616-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, an MP5 chipbreaker and a 1.6 mm corner radius for reliable steel turning and consistent tool life; order or request availability via Metav Werkzeuge if needed. TNMG270616-MP5 WPP20G indexable turning insert, Tiger·tec Gold — Walter Tools TNMG270616-MP5 WPP20G is a triangular indexable turning insert designed for productive steel machining, featuring a Tiger·tec Gold grade and an MP5 chipbreaker for controlled cutting performance. Tiger·tec Gold coated carbide grade WPP20G Optimised MP5 chipbreaker for steel 1.6 mm corner radius for stable cutting Triangular 60° form for versatile turning Reliable cutting performance for steel production The combination of the Tiger·tec Gold coating and the WPP20G carbide grade delivers a balance of wear resistance and toughness that suits a wide range of steel machining tasks. The coated substrate reduces flank wear and improves edge stability under the heat and pressure typical in steel turning. The result is longer tool life and fewer insert changes, which supports steady production throughput and reduces unplanned downtime. Predictable chip formation and surface quality Equipped with the MP5 chipbreaker, this insert produces consistent chip control during medium to heavy cuts in steel, reducing the risk of entanglement and protecting the workpiece finish. The 1.6 mm corner radius helps absorb cutting forces and contributes to a repeatable surface quality, while the negative 0° rake provides robust edge geometry for interrupted cuts and heavy engagement. This combination makes the insert suitable where consistent results and process stability are priorities. Geometry and handling that speed up setup The triangular 60° plate form offers three effective cutting edges per index, optimising cost per edge for serial turning tasks. The standard designation and tolerance class M ensure interchangeability across compatible toolholders, keeping setup times short and inventory management straightforward. Clear geometry and uniform tolerances also simplify toolpath planning and make integration into existing machining processes seamless. Application-focused benefits for production planners Classified for the P material group, this insert is tailored to the typical thermal conditions and chip behaviour of unalloyed and alloyed steels. The coated carbide and chipbreaker pairing provide predictable performance across a range of cutting parameters, making it a pragmatic choice for workshops seeking to increase uptime and achieve consistent part quality. The robust design supports both roughing and semi-finishing operations where reliability matters. Choose Walter Tools' Tiger·tec Gold TNMG270616-MP5 WPP20G for stable steel turning and contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMG270616-MP5-WPP20G-WALTER Designation: TNMG270616-MP5 WPP20G Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Inscribed circle: 27 mm Thickness designation: 06 Free cutting angle: 0° (negative) Tolerance class: M Special features Coating / grade: Tiger·tec Gold (WPP20G) Chipbreaker: MP5 Material: coated carbide Application: Steel (P) Plate form: triangular 60° Series: Tiger-tec Gold FAQ Which materials is this insert suitable for? This insert is specified for the P material group and is suitable for machining unalloyed and alloyed steel; the Tiger·tec Gold grade WPP20G is optimised for steel applications. What does the MP5 chipbreaker do? The MP5 chipbreaker controls chip formation for medium to heavy cuts in steel, improving chip evacuation and contributing to consistent surface finish when using the TNMG270616-MP5 WPP20G insert. How does the 1.6 mm corner radius affect results? A 1.6 mm corner radius increases edge strength and reduces vibration sensitivity, which helps achieve repeatable surface quality and extends the useful life of the cutting edge. Is the geometry suitable for interrupted cuts? Yes. The negative 0° rake and robust edge geometry of this triangular insert make it well suited to interrupted cuts and conditions with variable engagement. How many cutting edges are available per insert? The triangular 60° form provides three indexable cutting edges, allowing economical use of each insert before replacement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
TNMG270616-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the WPP20G universal grade combined with Tiger·tec Gold coating and a reliable RP5 chipbreaker to ensure steady, economical steel turning; order directly via Metav Werkzeuge or request advice from our technical consultants. TNMG270616-RP5 WPP20G — Turning indexable insert, triangular 60°, Tiger·tec Gold (Walter Tools) A TNMG270616-RP5 WPP20G turning insert engineered for efficient steel turning, offering universal performance and consistent chip control for production and job-shop environments Tiger·tec Gold coated carbide grade WPP20G Optimised RP5 chipbreaker for steel turning Triangular 60° shape with 1.6 mm corner radius 0° negative rake for secure roughing cuts Longer tool life through a universal, wear-resistant grade The WPP20G grade, part of the Tiger·tec Gold series, is a coated carbide solution optimised for the thermal and mechanical conditions of steel turning. Its balanced substrate and coating combination provides a durable cutting edge, which reduces the frequency of insert changes and lowers tool inventory requirements. In practice, this means fewer interruptions to production and a more economical machining process when turning a wide range of steels. The grade is designed to manage typical chip formation and temperature loads encountered in steel (P) machining. Stable cutting and reproducible surface quality The RP5 chipbreaker is engineered to produce controllable chip shapes at common turning feeds, which improves chip evacuation and reduces the risk of re-cutting. The insert’s negative 0° rake contributes to a robust cutting edge that resists chipping during interrupted cuts or heavy roughing passes, delivering stable process behaviour and more consistent surface finish. For operators unfamiliar with chipbreaker design, RP5 aims to strike a balance between short, manageable chips and a smooth transition to finishing passes. Geometry that boosts process reliability and repeatability The TNMG triangular form with a 60° included angle and a 1.6 mm corner radius increases edge strength while still permitting fine finishing when required. This geometry supports secure clamping in standard TNMG toolholders and helps dampen vibration, leading to repeatable dimensional results and predictable tool life. The combination of plate thickness and corner radius is particularly suited to mixed-operational environments where occasional heavy cuts and subsequent finishing passes are necessary. Compatibility, handling and workshop benefits Marked with the ISO designation TNMG270616-RP5 WPP20G, this insert fits holders that accept the TNMG family and is intended primarily for steel (P) applications. The coated surface simplifies entry into a wide variety of steels and reduces the need for multiple specialised grades. Technical staff will value the straightforward identification of chipbreaker and grade for quicker tool selection and inventory control. For specific clamping or holder compatibility questions, Metav Werkzeuge can provide fixture checks and practical recommendations. For tailored recommendations on tooling setups with Walter Tools’ Tiger·tec Gold WPP20G inserts and to arrange prompt supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TNMG270616-RP5-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG270616-RP5 WPP20G Walter Tools Product type: Drehwendeschneidplatte ISO designation: TNMG270616-RP5 WPP20G Grade: WPP20G Series: Tiger-tec Gold Core figures Corner radius: 1,6 mm Shape angle: 60° Free angle: 0° (negativ) Plate size: 27 Thickness: 06 Features & compatibility Chipbreaker: RP5 Material application: P (Steel) Substrate/coating: Coated carbide (Tiger·tec Gold) Execution: G Tolerance class: M UID: TNMG270616-RP5-WPP20G-WALTER FAQ What materials is this insert suitable for? The TNMG270616-RP5 WPP20G insert is intended primarily for steel (P) machining; the WPP20G grade is formulated for a broad range of steels typical in industrial turning. What performance advantage does the WPP20G grade provide? WPP20G, part of the Tiger·tec Gold family, gives a balanced wear resistance and versatility for turning operations, helping to extend tool life and reduce tool change frequency on steel components. How does the RP5 chipbreaker influence machining? The RP5 chipbreaker promotes controlled chip formation and reliable evacuation during turning, which improves process security and contributes to a consistent surface finish with the TNMG geometry. Which toolholders accept this insert? The insert follows the TNMG family geometry and is compatible with standard TNMG toolholders that accommodate triangular 60° indexable inserts; verification of clamping compatibility is advised before first use. How is the corner radius relevant to my application? The 1.6 mm corner radius increases edge robustness for heavier cuts while still permitting acceptable finishing; it balances strength and surface quality for mixed roughing and finishing tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product of the respective manufacturer.
TNMG270616-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, Tiger‑tec Gold coating and precise chip control for efficient steel machining; benefit from a robust triangular geometry and predictable tool life. Order the TNMG270616‑RP5 WPP30G turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG270616‑RP5 WPP30G Turning insert TNMG270616‑RP5 WPP30G for steel, Tiger‑tec Gold — Walter Tools TNMG270616‑RP5 WPP30G is an indexable turning insert designed for productive machining of steels, combining a coated carbide grade with a dedicated RP5 chipbreaker for consistent chip formation Tiger‑tec Gold coating for wear resistance WPP30G grade optimised for steel RP5 chipbreaker for stable chips Triangle 60° geometry for versatile cutting Faster, more reliable steel turning for higher throughput The combination of the Tiger‑tec Gold coating and the WPP30G grade delivers improved resistance to wear and thermal stress, which translates into longer cutting times and consistent surface quality when machining steels (ISO P). This insert is engineered to maintain a stable cutting edge under the typical heat and chip characteristics of steel machining, so cycle times are reduced and tool change intervals become more predictable. The result is measurable productivity gains and lower process variability in series production. Consistent chip control for safer, repeatable operations The integrated RP5 chipbreaker and the triangular 60° form ensure reliable chip formation and evacuation during medium to heavy cuts. A 1.6 mm corner radius supports accurate profile reproduction while balancing strength and finish. The insert’s 0° (negative) rake contributes to a strong cutting edge and improved tool stability under interrupted cuts or roughing conditions, reducing vibration and improving component tolerances in demanding turning applications. Predictable tool life and easier process planning With a tolerance class M and a coated carbide construction, this insert offers repeatable performance across batches and machines. Coating technology reduces flank wear and helps maintain dimensional accuracy over longer runs, so tool inventories and life‑cycle planning become simpler. The triangular 27 mm format provides multiple indexing positions, allowing economical use of each insert while preserving quality and consistency in production runs. Practical application notes and integration into workflows Designed specifically for machining steel, this insert suits workshops and production lines seeking a balance between economy and reliable performance. The RP5 chipbreaker supports general turning operations; the geometry is versatile enough for roughing and semi‑finishing when combined with appropriate cutting data. For integration into existing tool holders and lathe setups, verify compatible seat form and clamping before assembly, and consult Metav Werkzeuge for cutting parameter recommendations tailored to specific steel grades. Contact Metav Werkzeuge for application guidance and availability of Walter Tools Tiger‑tec Gold inserts: info@metav-werkzeuge.com • +49 2822 7131930 — expert advice and local supply from Metav Werkzeuge Technical data SKU: TNMG270616‑RP5‑WPP30G‑WALTER Article designation: TNMG270616‑RP5 WPP30G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 27 Corner radius: 1.6 mm Thickness: 06 Plate form: Triangle 60° Rake: 0° (negative) Tolerance class: M Special features Grade: WPP30G (coated carbide) Chipbreaker: RP5 Material suitability: Steel (ISO P) Coating technology: Tiger‑tec Gold Robust cutting edge and stable chip formation FAQ Which materials is this insert intended for? The TNMG270616‑RP5 WPP30G insert is designed primarily for steel (ISO P) applications and performs well across unalloyed and alloyed steels thanks to the WPP30G grade and Tiger‑tec Gold coating. What chipbreaker does the insert use and why does it matter? The insert features the RP5 chipbreaker, optimised for controlled chip formation in turning operations, which improves evacuation and reduces the risk of chip snarling on both manual and automated setups. How does the corner radius affect machining results? A 1.6 mm corner radius balances edge strength and surface finish, offering a good compromise for semi‑finishing and profile stability while maintaining reasonable cutting forces. Is the insert suitable for heavy interrupted cuts? Yes. The 0° (negative) rake and the coated carbide grade provide a sturdy cutting edge that stands up to interrupted cuts and roughing passes with improved edge security. What advantages does the Tiger‑tec Gold series provide? The Tiger‑tec Gold coating enhances thermal resistance and wear behaviour, which helps extend tool life and maintain consistent machining results across production batches. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
TNMG270616-RP7 WPP20G G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WPP20G grade and an RP7 chipbreaker delivers long tool life and dependable chip control for machining Stahl; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TNMG270616-RP7 WPP20G – Indexable turning insert, Tiger·tec Gold coating, for Stahl | Walter Tools The TNMG270616-RP7 WPP20G is an indexable turning insert intended for general turning applications in Stahl, designed to balance wear resistance and reliable chip formation. Tiger·tec Gold coating for high wear resistance RP7 chipbreaker for reliable chip control Triangular 60° shape for versatile turning 1.6 mm corner radius for stable cutting edge Maximise tool life and reduce downtime The combination of the Tiger·tec Gold coating and the WPP20G carbide grade provides enhanced abrasion resistance and thermal stability, which translates into prolonged tool life under typical turning conditions in Stahl. The coating technology reduces flank wear and supports steady cutting forces, so process windows remain stable across medium to high cutting speeds. This stability helps to lower tool-change frequency and maintain production rhythm without complex interventions. Consistent chip control and surface quality The RP7 chipbreaker is tuned for predictable chip formation when machining Stahl, promoting short, controllable chips that evacuate reliably from the cutting zone. The insert’s triangular 60° geometry and 1.6 mm corner radius contribute to a robust cutting edge that resists chipping and supports a consistent surface finish. These features together reduce the need for rework and support reproducible part quality in serial production. Clear material application and machining guidance Designed for the ISO P material group, the insert is suitable for unalloyed and alloyed Stahl where typical heat generation and chip behaviour are encountered. The negative 0° relief angle provides a stable cutting geometry for turning operations that require rigidity and edge strength. For best results, match cutting data to the workpiece grade and machine capability; the insert’s specification favours conservative feeds with higher cutting speeds to exploit the coating’s thermal benefits while maintaining edge life. Practical mounting and economic effect The triangular form offers three usable cutting edges per index, enabling economical use of the insert before replacement. The plate’s dimensions and thickness code contribute to axial and radial stiffness, which is beneficial for medium-depth turning and interrupted cuts where edge robustness is required. Choosing this insert supports predictable tool-change intervals and an efficient inventory strategy for workshop tooling. For application support or availability of Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and fast delivery. Technical data Article number: TNMG270616-RP7-WPP20G-WALTER Name: Drehwendeschneidplatte TNMG270616-RP7 WPP20G Walter Tools WPL designation: TNMG270616-RP7 WPP20G Series: Tiger-tec Gold Grade: WPP20G Manufacturer: Walter Tools Facts Plate size: 27 Thickness code: 06 Corner radius: 1.6 mm Relief angle: 0° (negative) Shape: Dreieck 60° Chipbreaker: RP7 Tolerance class: M Special features Coating/technology: Tiger·tec Gold Carbide grade: WPP20G (coated cemented carbide) Typical application: ISO P (Stahl) Designed for stable chip formation and wear resistance FAQ Which materials is this insert suitable for? The TNMG270616-RP7 WPP20G insert is specified for the ISO P group and is suitable for machining various types of Stahl including unalloyed and alloyed steels. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on the WPP20G grade promotes short, controllable chips and consistent chip evacuation, improving process reliability when turning Stahl. How many cutting edges are available per insert? Due to the triangular 60° geometry, the insert provides three indexable cutting edges before replacement, supporting economical usage. What benefit does the Tiger·tec Gold coating offer? The Tiger·tec Gold coating enhances wear resistance and thermal stability, which helps to extend edge life and sustain higher cutting speeds with consistent results for Stahl machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG270624-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven WPP20G grade and a geometry optimised for steel turning to improve process reliability and extend tool life; order the inserts directly via Metav Werkzeuge or consult our application specialists for selection and cutting-data support. TNMG270624-RP7 WPP20G turning insert — Tiger·tec Gold coated carbide, for steel | Walter Tools A TNMG270624-RP7 WPP20G triangular indexable insert designed for robust steel turning, delivering stable chip formation and long, reproducible life in general turning applications Tiger·tec Gold coated carbide for longer tool life RP7 chipbreaker for consistent chip control Triangular 60° insert with 2.4 mm corner radius Optimised for steel machining (ISO P) Increased productivity through a proven coating and grade The Tiger·tec Gold coating combined with the WPP20G grade provides a balanced mix of wear resistance and toughness, which translates into longer intervals between indexings and fewer tool changes. This grade is a coated carbide specifically developed for the thermal and mechanical demands of steel turning; the coating reduces flank wear and enhances process reliability under typical cutting temperatures. For manufacturers seeking to raise uptime on batch and continuous turning operations, the pragmatic benefit is a measurable reduction in non-productive time and predictable tool performance. Reliable chip control and surface quality with RP7 geometry The RP7 chipbreaker is engineered to produce short, controlled chips when machining steels, reducing the risk of entanglement and improving evacuation at the tool nose. A well-formed chip directly supports consistent surface finish and stable cutting forces, which helps to maintain workpiece tolerances. The triangular 60° form and a 2.4 mm corner radius ensure a robust cutting edge that is forgiving on interrupted cuts, while also enabling acceptable finishes on most turning passes. For users less familiar with chipbreaker technology: this geometry channels the material flow away from the cutting zone and breaks the chip into manageable segments. Application scope and cutting conditions explained This insert is primarily suited to ISO P materials — unalloyed and alloyed steel grades — and is rated M tolerance class with a negative 0° rake for stable engagement. The nominal inscribed circle and plate thickness yield a strong support area in the toolholder, which is beneficial for higher feed or heavier depth-of-cut scenarios. Where higher cutting speeds are applied, the coating’s thermal stability aids in resisting crater wear; conversely, in tougher interrupted cuts the grade’s toughness prevents premature chipping. Selection of speeds and feeds should follow supplier recommendations and be validated on the machine in question to attain the best compromise between productivity and tool life. Proven brand performance and workshop integration Walter Tools’ offerings are known for consistent, workshop-ready performance and this grade complements that reputation by offering a versatile option across a wide range of steel specifications. The insert is straightforward to implement in existing tooling systems that accept TNMG 27 form inserts: no special adapters are required and set-up time remains minimal. If additional guidance is required regarding toolholder compatibility or recommended cutting data, Metav Werkzeuge’s technicians can provide tailored advice and data sheets to support a smooth integration. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts or to request cutting parameters and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TNMG270624-RP7-WPP20G-WALTER Label: Drehwendeschneidplatte TNMG270624-RP7 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WPP20G Designation without grade: TNMG270624-RP7 ISO designation: TNMG270624-RP7 WPP20G Execution: G Facts Inscribed circle: 27 mm Corner radius: 2.4 mm Plate thickness: 6 mm Geometry: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Chipbreaker: RP7 Suitable for: Steel (ISO P) Application focus: General turning, stable chip formation FAQ What materials is this insert suitable for? The TNMG270624-RP7 WPP20G insert is optimised for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are tailored to handle the heat and chip formation typical for these materials. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes short, controllable chips and improves evacuation at the cutting edge, which supports consistent surface quality and lowers the chance of chip-related interruptions when turning steel. What are the key geometry benefits for production use? A 60° triangular form with a 2.4 mm corner radius provides a robust cutting edge suitable for heavier cuts and interrupted machining, while the negative 0° rake contributes to stable engagement and reduced vibration. Is this insert compatible with standard TNMG toolholders? Yes, the TNMG270624-RP7 format fits standard toolholders designed for TNMG inserts; proper clamping and seat condition should be checked to ensure repeatable results. Can this grade be used at elevated cutting speeds? The Tiger·tec Gold coating offers good thermal stability, enabling productive cutting speeds for many steel applications; however, cutting data should be validated on the specific machine and material to balance tool life and productivity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG330924-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from a combination of the Tiger·tec Gold coating and an RP5 chipbreaker to achieve stable chip formation and longer tool life when machining steel; order directly via Metav Werkzeuge or consult the technical team for cutting data and process optimisation. TNMG330924-RP5 WPP20G indexable turning insert, Tiger·tec Gold coating — for steel | Walter Tools A TNMG330924-RP5 WPP20G indexable turning insert designed for efficient steel turning applications, offering a robust RP5 chipbreaker and a 60° triangle form for versatile turning tasks. Tiger·tec Gold coating for long tool life RP5 chipbreaker for reliable chip control Triangle 60° form with 2.4 mm corner radius Enhanced wear resistance through advanced coating The grade in this series is WPP20G, part of the Tiger·tec Gold family, which combines a tailored coating and substrate to provide improved wear resistance in continuous and interrupted turning of steel. The coated carbide construction controls flank wear and extends the usable life of the insert, reducing changeover frequency and contributing to steadier process costs. For operations where repeatable tool life is critical, the coating technology supports consistent performance across production runs. Predictable chip control and surface quality Equipped with the RP5 chipbreaker, the insert directs and breaks chips reliably during standard turning operations, leading to safer chip evacuation and improved surface finish. The chip geometry is optimised for common steel grades, meaning fewer secondary operations and a lower risk of surface damage. Stable chip formation also decreases the likelihood of built-up edge formation, which helps maintain dimensional accuracy and reduces scrap rates in batch production. Designed for robust steel machining with neutral rake The insert features a 0° negative rake and is specified for the machining of steel (material group P), allowing for higher reliability when cutting tougher or variable steels. The negative rake enhances edge strength, making the insert more tolerant of interrupted cuts and feed variations. Process planners and machinists benefit from the increased robustness: fewer insert failures translate into less unplanned downtime and a more predictable production flow. Geometry and tolerance for precise positioning and strength The triangular Triangle 60° form with a 2.4 mm corner radius offers a balance between cutting strength and accessibility for turning profiles. The plate size code 33 and thickness code 09 support common toolholder systems that accept the TNMG family, while the tolerance class M ensures consistent fit and repeatable indexing. These geometry characteristics contribute to reliable clamping and reproducible cutting conditions, supporting higher overall equipment effectiveness in workshop and production environments. Contact Metav Werkzeuge for tailored cutting data, availability and procurement of Walter Tools inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMG330924-RP5-WPP20G-WALTER Article designation: TNMG330924-RP5 ISO designation: TNMG330924-RP5 WPP20G Manufacturer: Walter Tools Facts Form: Triangle 60° Corner radius: 2.4 mm Size code: 33 Thickness code: 09 Relief angle: 0° (negative) Tolerance class: M Special features Grade: WPP20G (Tiger·tec Gold coated carbide) Chipbreaker: RP5 Series: Tiger·tec Gold Material application: Steel (P) Execution: G FAQ What materials is this insert intended for? The insert is specified for machining steel (material group P); the TNMG330924-RP5 WPP20G grade and Tiger·tec Gold coating are optimised for steel turning. How does the RP5 chipbreaker influence process stability? The RP5 chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces the risk of chip-related interruptions during turning. Can this insert handle interrupted cuts and roughing tasks? Yes, the negative 0° rake and the triangular form with a 2.4 mm corner radius provide enhanced edge strength for interrupted cuts and robust roughing operations. Which toolholders are compatible with the insert code 33 and thickness 09? The insert conforms to standard TNMG-style holders that accept the size code 33 and thickness code 09; compatibility should be verified against the toolholder specification. Is the WPP20G grade coated or uncoated? WPP20G is a coated carbide grade from the Tiger·tec Gold family, designed to improve wear resistance and process reliability when machining steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanation purposes only. There is no affiliation between Metav Werkzeuge and the listed manufacturers. The item offered is an original, brand-new product from the stated manufacturer.
TNMG330924-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a robust RP5 chipbreaker to ensure consistent productivity when machining Stahl; order directly via Metav Werkzeuge or consult the team for application advice. TNMG330924-RP5 WPP30G — Turning indexable insert, triangle 60°, for Stahl — Walter Tools The TNMG330924-RP5 WPP30G is a triangular indexable insert designed for turning operations in Stahl, offering the Tiger·tec Gold coating and an RP5 chipbreaker for stable chip formation and extended tool life. Tiger·tec Gold coating for longer tool life Triangular 60° form with 2.4 mm corner radius Negative 0° rake for stable cutting conditions RP5 chipbreaker optimised for Stahl chips Consistent productivity through coated carbide technology The combination of the Tiger·tec Gold coating and the WPP30G carbide grade delivers a measurable improvement in tool life and process stability when turning Stahl. The coating technology reduces flank wear and improves thermal resistance, which translates into fewer insert changes and higher machine uptime. The RP5 chipbreaker is designed to generate controllable chip shapes during interrupted and continuous cuts, helping to avoid built-up edge and unpredictable chip behaviour. For operations where repeatability and throughput matter, this geometry and grade reduce cycle-time variability and support efficient production runs. Stable geometry for precise and reliable machining results A triangular 60° form with a 2.4 mm corner radius provides a balance between edge strength and achievable surface finish. The negative 0° rake increases cutting edge robustness for heavier cuts and interrupted turning, improving stability under varying cutting forces. The insert's nominal size (inscribed circle 33) and plate thickness 09 ensure a rigid contact area in common toolholders, contributing to consistent dimensional accuracy and improved surface quality. Together, these geometric features deliver predictable cutting behaviour and minimise vibration-related defects in turned components. Application-oriented performance and material coverage This grade is specified for ISO 513 group P, meaning the insert is optimised for unalloyed and alloyed Stahl where typical heat generation and chip formation require reliable wear resistance and stable edge geometry. The WPP30G designation indicates a coated carbide intended for a wide range of steel turning tasks, offering a compromise between wear resistance and toughness that suits roughing and finishing passes within conventional turning windows. The combination of grade and RP5 chipbreaker simplifies process selection and reduces the need for frequent requalification of cutting data across similar batch productions. For expert guidance on integrating Walter Tools inserts into existing turning processes, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical Data Article number: TNMG330924-RP5-WPP30G-WALTER Designation: TNMG330924-RP5 WPP30G Type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Data Insert form: Triangle 60° Corner radius: 2.4 mm Rake angle: 0° (negative) Inscribed circle: 33 Thickness: 09 Chipbreaker: RP5 Tolerance class: M Material group: P (Stahl) Special features Coating: Tiger·tec Gold (coated carbide) Sort: WPP30G Optimised for Stahl (ISO 513 group P) Robust edge geometry for interrupted cuts Stable chip control with RP5 chipbreaker FAQ Which materials are suitable for this insert? The TNMG330924-RP5 WPP30G is designed for Stahl applications and conforms to ISO 513 group P, making it suitable for unalloyed and alloyed steels typical in general turning tasks. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP30G grade enhances thermal resistance and wear performance, extending edge life and improving process stability during steel turning. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker promotes predictable chip formation for Stahl, reducing risk of long, entangling chips and supporting safer, more consistent turning cycles. What does a 0° negative rake mean in practice? A negative 0° rake increases edge strength and is beneficial for heavier cuts or interrupted machining, offering improved resistance to chipping compared with more positive rake geometries. Is this insert suitable for finishing as well as roughing? With its balance of toughness and wear resistance, the WPP30G grade is appropriate for a range of operations from roughing to medium finishing passes in Stahl, depending on cutting parameters and workpiece requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com