TNMM160408-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP20G grade for reliable, economical steel turning; the triangular 60° geometry with HU3 chipbreaker ensures stable chip control and consistent surface quality. Order directly via Metav Werkzeuge or request advice from our consultants for fast technical support and availability. TNMM160408-HU3 WPP20G indexable turning insert – for steel (Tiger‑tec Gold) | Walter Tools The TNMM160408-HU3 WPP20G is a triangular 60° indexable turning insert with a Tiger‑tec Gold coated grade, engineered for efficient, high‑productivity turning of steel components. Tiger‑tec Gold coating for extended tool life WPP20G grade optimised for steel machining Triangle 60° plate with 0.8 mm corner radius HU3 chipbreaker for reliable chip control High productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WPP20G grade delivers a balanced performance profile tailored to steel turning. The coated carbide substrate provides improved wear resistance and heat management compared with uncoated grades, which translates into longer tool life and fewer indexings during production. This makes the insert particularly suitable for medium‑ to high‑volume machining where consistent cutting performance and reduced tool costs are priorities. The design reduces unscheduled downtime and supports steady output in a production environment. Geometry and chip control for consistent surface finish The triangular 60° plate form with a 0.8 mm corner radius and the HU3 chipbreaker create a robust cutting edge that tolerates interrupted cuts and varying engagement conditions. The 0° (negative) relief configuration contributes to a stable cutting geometry, while the chipbreaker optimises chip formation for typical steel alloys. Together these features help to maintain dimensional accuracy and surface quality during sustained turning operations, offering predictable results on turned parts where repeatability is essential. Application range and process benefits Designed for the ISO P material group, this insert is intended specifically for turning steel, including both unalloyed and alloyed grades. The WPP20G sort is aimed at a versatile balance between wear resistance and toughness, providing reliable performance across common steel machining tasks. For manufacturers and job shops seeking an economical, reproducible solution, the insert supports efficient cycle times and simplified tool management thanks to its standardised geometry and Walter Tools quality. Contact Metav Werkzeuge for application advice and availability of the Walter Tools TNMM160408-HU3 WPP20G insert and to discuss delivery options and technical suitability Technical data Article number: TNMM160408-HU3-WPP20G-WALTER Label: Drehwendeschneidplatte TNMM160408-HU3 WPP20G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Core data Inscribed circle: 16 mm Corner radius: 0.8 mm Thickness code: 04 Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU3 Plate form: triangle 60° Code designation: TNMM160408-HU3 Suitable material group: steel (ISO P) Execution: M FAQ What materials is this insert suitable for? The TNMM160408-HU3 WPP20G insert is specified for the ISO P material group and is optimised for turning various types of steel. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP20G grade enhances wear resistance and thermal stability, which helps extend tool life and supports continuous production with fewer indexings. What does the HU3 chipbreaker do? The HU3 chipbreaker is designed to control chip formation in steel turning, improving evacuation and reducing the likelihood of built‑up edge, which contributes to consistent surface finishes. Is the insert suitable for interrupted cuts? Yes, the triangle 60° geometry combined with the 0° (negative) relief and robust grade makes the insert well suited to conditions that include interrupted cutting. How to identify the correct designation for ordering? Order using the full designation TNMM160408-HU3 WPP20G (Walter Tools) to ensure the correct insert geometry, grade and chipbreaker are supplied. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TNMM160412-HU3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the HU3 chipbreaker and the robust triangle geometry for consistent performance in steel turning; order genuine Walter Tools inserts via Metav Werkzeuge or contact our consultants for tailored application advice. TNMM160412-HU3 WPP10G indexable turning insert for steel by Walter Tools The TNMM160412-HU3 WPP10G is an indexable turning insert designed for machining steel, combining a Tiger·tec Gold coated grade with an HU3 chipbreaker for reliable chip formation and long tool life. Tiger·tec Gold coated for long tool life Optimised HU3 chipbreaker for steel machining Triangle 60° insert with 1.2 mm corner radius 0° negative rake for stable turning operations Greater wear resistance with Tiger·tec Gold for productive turning The coated grade WPP10G from Walter Tools is engineered for demanding steel applications, offering a balance of wear resistance and toughness that improves tool life under typical turning conditions. The Tiger·tec Gold coating reduces flank and crater wear while maintaining edge integrity, which translates into longer service intervals and more consistent component quality. For production environments, this means fewer insert changes and steadier cycle times, supporting higher productivity without sacrificing surface finish. Reliable chip control that stabilises the machining process Equipped with the HU3 chipbreaker, this insert delivers controlled chip formation tailored to steels (ISO group P). The chip geometry reduces the risk of long, tangled swarf and supports predictable evacuation in both through-tool and external coolant setups. Combined with a 0° negative rake, the configuration prioritises process stability and strength at the cutting edge, making the insert particularly suited to interrupted cuts and heavier engagement where a durable edge is essential. Geometry engineered for strength and versatility The triangular 60° form and a 1.2 mm corner radius provide a robust cutting edge and multiple indexable positions, increasing the number of effective edges per insert and lowering tooling costs per part. The insert’s size designation and thickness code ensure mechanical rigidity and repeatable clamping in standard toolholders. This geometry supports a range of applications from medium finishing to roughing in steels, where the larger corner radius helps maintain dimensional control and resist chipping under transient loads. Clear selection criteria and industrial compatibility The ISO designation TNMM160412-HU3 WPP10G simplifies tool selection for workshops specifying inserts by ISO codes; the WPP10G grade is explicitly tuned for steel machining according to the manufacturer’s material classification. With tolerance class M, users can expect consistent seat fit and reproducible results when exchanging inserts, supporting reliable setup times and predictable wear behaviour. For buyers seeking a combination of process security and cost-effective productivity, this insert represents a balanced choice in the Walter Tools Tiger·tec Gold family. For application support or to request a quote for genuine Walter Tools TNMM160412-HU3 WPP10G inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice Technical data Article number: TNMM160412-HU3-WPP10G-WALTER Description: Drehwendeschneidplatte TNMM160412-HU3 WPP10G Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger-tec Gold Grade: WPP10G ISO designation: TNMM160412-HU3 WPP10G Execution: M Tolerance class: M Core specifications Corner radius: 1.2 mm Insert form: triangle 60° Size designation: 16 Thickness code: 04 Rake angle: 0° (negative) Special features Coating: Tiger·tec Gold Chipbreaker: HU3 Material application: steel (ISO P) Sort description: WPP10G coated cemented carbide Series characteristics: Tiger-tec Gold – balanced wear resistance and toughness FAQ Which materials is this insert intended for? The TNMM160412-HU3 WPP10G insert from Walter Tools is intended primarily for steel (ISO P) machining and is optimised for the heat and chip behaviour typical of turned steels. What advantages does the HU3 chipbreaker provide? The HU3 chipbreaker on the Walter Tools insert promotes controlled chip formation for turning steels, improving chip evacuation and reducing downtime related to swarf issues. How does the triangle 60° geometry affect application choice? The triangle 60° geometry offers multiple indexable edges and a sturdy cutting profile; with a 1.2 mm corner radius the insert balances strength for roughing with acceptable surface quality for finishing operations. Is the coating suitable for high-productivity applications? Yes, the Tiger·tec Gold coating used on the WPP10G grade enhances wear resistance and edge life, supporting sustained productive cycles in steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
TNMM160412-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a HU3 chipbreaker for controlled chip formation and the stable triangle 60° geometry to maintain consistent turning performance in steel operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMM160412-HU3 WPP20G Turning indexable insert — Tiger·tec Gold, for steel (Walter Tools) TNMM160412-HU3 WPP20G is an indexable turning insert designed for efficient steel turning, delivering reliable wear resistance and consistent chip control in general machining applications. Tiger·tec Gold coating for high wear resistance Designed for steel machining (ISO P) HU3 chipbreaker for controlled chip formation Triangle 60° form with 1.2 mm corner radius Longer tool life through advanced coating technology The insert’s Tiger·tec Gold grade WPP20G combines a hard, wear-resistant coating with a tough substrate to extend tool life during continuous steel turning. This formulation is optimised for the heat and chip shapes typical of ISO P materials, so the result is a reduced rate of flank wear and fewer tool changes. The outcome for production is greater uptime and lower tool consumption per component, which improves process economics without sacrificing finish. Stable chip control and improved surface finish The HU3 chipbreaker is engineered to produce predictable chips that evacuate cleanly from the cut, reducing the risk of entanglement and tool damage. The controlled chip formation contributes directly to a better surface quality and more stable cutting forces, which supports higher material removal rates under correct cutting conditions. For operations where part finish and dimensional consistency matter, this geometry helps maintain repeatable results over longer tool life. Geometry designed for robust turning and versatility A triangle 60° insert form offers multiple indexable cutting corners and a compact cutting edge for robust engagement in interrupted or continuous cuts. The 1.2 mm corner radius balances edge strength with the capacity to achieve fine surface finishes; a larger radius would increase robustness but could compromise fine finishing, while a smaller radius would be more fragile. The insert’s 0° negative clearance provides a stable cutting edge orientation for heavier cuts and reliable seat in standard TNMM toolholders. Practical benefits for workshop integration Marked as TNMM160412-HU3 WPP20G, the insert fits TNMM-compatible holders and is straightforward to replace and index, supporting quick changeovers. Its specification and ISO designation simplify procurement and inventory management across production lines. Given its focus on steel machining, this insert suits mixed-production environments seeking a universal grade that handles a broad range of unalloyed and alloyed steels while keeping processes predictable and efficient. For machining tasks that demand durable edges and controlled chip flow, contact Metav Werkzeuge for ordering and application support — Metav Werkzeuge is ready to advise on toolholder matching and cutting parameters: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: TNMM160412-HU3-WPP20G-WALTER ISO designation: TNMM160412-HU3 WPP20G Manufacturer: Walter Tools Series / Grade: Tiger·tec Gold / WPP20G Execution: M Core specifications Size: 16 Thickness: 04 Corner radius: 1.2 mm Clearance angle: 0° (negative) Tolerance class: M Design and applications Shape: triangle 60° Chipbreaker: HU3 Material application: steel (ISO P) Type: indexable turning insert Label: TNMM160412-HU3 WPP20G FAQ What materials is this insert intended for? The TNMM160412-HU3 WPP20G is designed primarily for steel (ISO P) machining and performs reliably across unalloyed and alloyed steels. How does the Tiger·tec Gold grade affect performance? The Tiger·tec Gold grade WPP20G provides enhanced wear resistance and edge protection, which extends tool life and supports consistent component quality in steel turning. What is the benefit of the HU3 chipbreaker? The HU3 chipbreaker produces controlled chips that evacuate cleanly, lowering the risk of chip-related damage and helping to maintain a stable cutting process and improved surface finish. How many usable cutting corners does the triangular insert offer? The triangle 60° geometry gives three indexable cutting corners, enabling multiple repositions before replacement and contributing to cost-effective usage. Will this insert fit my TNMM toolholder? With the ISO designation TNMM160412-HU3, the insert is compatible with toolholders specified for TNMM inserts; check holder specifications to confirm fit. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; The Walter AG (brand: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
TNMM220408-HU3 WPP20G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP20G grade ensures extended tool life and reliable chip control in steel turning; the triangular 60° form with a 0.8 mm corner radius adds strength and repeatable edge performance. Order the insert directly via Metav Werkzeuge or request tailored cutting data from the technical team. TNMM220408-HU3 WPP20G indexable turning insert — Walter Tools, Tiger·tec Gold, for steel machining The TNMM220408-HU3 WPP20G is an indexable turning insert designed for productive machining of steel (ISO P), combining Tiger·tec Gold coating and the HU3 chipbreaker for consistent chip control in industrial turning applications Tiger·tec Gold coating for high wear resistance Grade WPP20G optimised for steel (ISO P) Triangular 60° form with 0.8 mm corner radius HU3 chipbreaker for stable chip control Increased tool life and stable cutting performance The advanced Tiger·tec Gold coating applied to this indexable insert significantly improves wear resistance and thermal stability compared with uncoated grades. The WPP20G grade is specified for machining steels and is balanced for wear resistance and toughness, which reduces flank and crater wear under typical turning conditions. As a result, tool changes become less frequent and process uptime increases, delivering tangible productivity improvements and lower total machining costs. Geometry engineered for robustness and surface quality The triangular 60° geometry with a 0.8 mm corner radius provides a robust cutting edge that withstands intermittent and heavier cuts. The insert’s 0° (negative) clearance ensures a secure seat in the toolholder and supports stable chip formation under higher radial loads. These geometric choices translate into better surface finishes and repeatable dimensional results, especially in serial production where consistent component quality is essential. Chip control and material suitability for productive turning The HU3 chipbreaker is tuned for steel applications and promotes short, segmented chips that evacuate reliably from the cutting zone. This reduces the risk of chip entanglement and secondary finishing operations. Classified for ISO group P (steel), the insert suits a wide range of unalloyed and alloyed steels, making it a versatile choice across many production tasks where predictable chip behaviour and tool life are required. Practical benefits for workshop integration and handling The triangular form provides three indexed cutting edges, improving economy per insert. The insert’s format and thickness code 04 facilitate rigid clamping in compatible toolholders, supporting stable cutting conditions. Specification and repeatability are supported by the Walter Tools manufacturing standard, which promotes consistent edge condition and minimal batch variation — important when integrating inserts into established production cycles or CNC tool lists. For application-specific data or recommendations on using Walter Tools turning inserts such as this Tiger·tec Gold grade, contact Metav Werkzeuge for cutting parameters, toolholder compatibility or sample testing at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TNMM220408-HU3-WPP20G-WALTER Article designation: TNMM220408-HU3 WPP20G Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Form: Triangular 60° Chipbreaker: HU3 Tolerance class: M Numerical Data Inscribed circle: 22 mm Corner radius: 0.8 mm Clearance angle: 0° (negative) Thickness code: 04 Design & Features Coated carbide, Tiger·tec Gold technology Optimised for steel (ISO P) Robust cutting edge for productive turning Three usable cutting edges due to triangular form Stable chip control with HU3 chipbreaker FAQ What materials is this insert suitable for? The TNMM220408-HU3 WPP20G insert is optimised for steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are balanced for unalloyed and alloyed steels. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this Walter Tools turning insert promotes short, controlled chips for reliable evacuation and reduced risk of chip-related interruptions. What are the key geometry benefits of the triangular 60° form? The triangular 60° form offers a robust geometry with three indexed cutting edges and, combined with the 0.8 mm corner radius, improves edge strength and repeatable surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods from Walter Tools.
TNMM220408-HU3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of a proven combination of Tiger·tec Gold coated carbide and an HU3 chipbreaker for reliable steel machining; the triangular 60° geometry with a 0.8 mm nose radius provides stable cutting performance and predictable tool life. Order or request technical advice via Metav Werkzeuge for precise application support. TNMM220408-HU3 WPP30G turning indexable insert — Tiger·tec Gold coated, for steel, Walter Tools The TNMM220408-HU3 WPP30G is a triangular 60° turning insert engineered for machining steel, offering a robust negative 0° rake, an HU3 chipbreaker for consistent chip control and a 0.8 mm corner radius for durable edge performance. Tiger·tec Gold coated carbide for high productivity Optimised HU3 chipbreaker for stable chip control Triangle 60° geometry with 0.8 mm corner radius Negative 0° rake for a robust cutting edge High process reliability and material suitability The coated carbide grade WPP30G, part of the Tiger·tec Gold series, is developed for demanding steel applications (ISO group P). Its multilayer coating and substrate combination ensure improved wear resistance and stable edge retention under the thermal loads typical of steel machining. This translates into fewer insert changes and higher process reliability, with the coating reducing adhesion and flank wear. For users with mixed batch production, the alloy balance of the grade offers a blend of toughness and hardness that supports both roughing and finishing tasks. Predictable chip formation and surface quality The HU3 chipbreaker has been developed to shape chips reliably across a range of cutting depths and feeds. Combined with the negative 0° rake, the system reduces the tendency for uncontrolled chip formation and helps maintain a consistent contact geometry, which supports repeatable surface finish. The 0.8 mm corner radius contributes to a compromise between edge strength and achievable finish, lowering the risk of premature edge chipping while enabling satisfactory surface integrity on steel components. Geometry and handling advantages that save machine time The triangular 60° plate form provides multiple usable edges and a compact seating geometry that suits short overhang toolholders and stable clamping. With a plate size of 22 and a plate thickness coded 04, the insert integrates easily into common turning toolholders designed for this family. The tolerance class M indicates a machining accuracy level suitable for many industrial turning operations. Overall, the design reduces downtime through straightforward indexing and predictable wear behaviour, supporting efficient shop-floor workflows. For application-specific advice on the Walter Tools TNMM220408-HU3 WPP30G or to verify compatibility with a particular turning centre, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange a technical consultation Technical data Article number: TNMM220408-HU3-WPP30G-WALTER Name: Drehwendeschneidplatte TNMM220408-HU3 WPP30G Manufacturer: Walter Tools Product type: turning indexable insert Series: Tiger·tec Gold Grade: WPP30G Facts Plate size: 22 mm Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: triangle 60° Chipbreaker: HU3 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Material suitability: steel (P) Robust cutting edge for general steel turning Designed for predictable chip control Three cutting edges per triangular insert FAQ What steels is this insert suited for? The TNMM220408-HU3 WPP30G from Walter Tools is formulated for ISO group P materials, i.e. unalloyed and alloyed steels, with the coating and substrate optimised for the heat and chip formation typical of steel machining. How does the HU3 chipbreaker influence performance? The HU3 chipbreaker promotes controlled chip formation and evacuation, improving surface consistency and reducing the risk of chip-related interruptions when using the TNMM220408-HU3 WPP30G insert. Can the triangular plate be indexed to restore the cutting edge? Yes, the triangular 60° geometry provides multiple usable cutting edges, allowing indexing to a fresh edge when the active corner shows wear, thereby extending usable insert life. What advantage does the negative 0° rake provide? A negative 0° rake offers a more robust cutting edge and increased resistance to chipping when machining steels, which benefits interrupted cuts or unstable clamping conditions using this Walter Tools insert. Is this insert suitable for finishing operations? The combination of a 0.8 mm corner radius and the Tiger·tec Gold coating enables acceptable surface quality in finishing passes on steel; selection of feed and depth of cut should be tuned to achieve the required finish. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names belong to their respective owners. Brand names are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
TNMM220412-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of high process reliability, optimised chip control and a Tiger·tec Gold coating that extends tool life in steel turning applications; order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. TNMM220412-HU3 WPP20G turning indexable insert — Tiger·tec Gold grade for steel by Walter Tools TNMM220412-HU3 WPP20G is a triangular turning insert engineered for efficient steel machining with a robust chipbreaker and a negative rake design Tiger·tec Gold coated carbide Optimised chip control HU3 Triangle 60° shape for versatile turning Improved process stability through a coated grade The coated WPP20G grade from the Tiger·tec Gold series delivers consistent wear behaviour and stable cutting-edge performance in steel applications. The combination of a modern multi-layer coating and a wear-resistant substrate reduces flank and crater wear, resulting in longer tool life and fewer indexings. For production environments seeking predictable cycle times, this turning insert contributes to reduced unplanned downtime and improved overall equipment effectiveness. Predictable chip formation for safer machining The HU3 chipbreaker is specifically designed to produce short, controllable chips when cutting steels, which eases chip evacuation and minimises the risk of entanglement. The insert’s geometry — a triangle 60° form with a 1.2 mm corner radius and negative rake 0° — balances strength at the cutting edge with good access for finishing passes. This geometry ensures reliable surface results and reduces the likelihood of vibration-related defects in medium to heavy turning operations. Flexible integration and handling advantages As an indexable insert in the TNMM family, the plate offers four usable cutting edges, enabling economical use of the carbide blank before reconditioning or disposal. The standardised shape and size allow straightforward fitment in a wide range of turning tool holders, supporting quick changeovers on the shop floor. The tolerance class M and the plate’s design make it suitable for general turning tasks where robust performance and repeatability are required. Clear application focus and machining guidance Engineered for the ISO P group, this grade is optimised for a broad range of unalloyed and alloyed steel grades encountered in workshops and production lines. Speeds and feeds should be selected according to the specific steel grade and the machine’s rigidity; the coated carbide performs well at typical finishing and medium-cut conditions, improving surface quality without sacrificing tool life. The result is efficient material removal combined with a predictable tool consumption curve. Contact Metav Werkzeuge for a tailored machining recommendation or to discuss compatibility with existing tool holders — Metav Werkzeuge can provide technical advice and order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMM220412-HU3-WPP20G-WALTER Article designation: TNMM220412-HU3 WPP20G Product type: Turning indexable insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Facts Corner radius: 1.2 mm Insert form: Triangle 60° Rake: 0° (negative) Size designation: 22 Tolerance class: M Thickness designation: 04 Special features Chipbreaker type: HU3 Coating technology: Tiger·tec Gold Substrate: coated carbide Primary application group: Steel (ISO P) Manufacture UID: TNMM220412-HU3-WPP20G-WALTER FAQ What materials is this insert intended for? The TNMM220412-HU3 WPP20G insert is designed primarily for ISO P materials, i.e. unalloyed and alloyed steel, offering optimised cutting behaviour for common turning tasks. Which chip control can be expected from the HU3 breaker? The HU3 chipbreaker on the WPP20G grade produces short, controllable chips in steel machining, improving evacuation and reducing the risk of chip entanglement. How does the insert geometry affect finishing and strength? The triangle 60° form with a 1.2 mm corner radius and negative rake provides a robust cutting edge for medium to finishing operations, balancing surface quality and edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMM220416-HU3 WPP10G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the robust HU3 chipbreaker, this insert combines high process reliability and consistent chip control for productive steel turning. Order the insert directly via Metav Werkzeuge or consult our advisers for machining data and application support. TNMM220416-HU3 WPP10G — Turning indexable insert, Tiger·tec Gold coating, for steel | Walter Tools The TNMM220416-HU3 WPP10G is a triangular 60° turning insert optimised for ISO P (steel) applications, featuring a Tiger·tec Gold coated carbide grade and a HU3 chipbreaker for stable, repeatable cutting performance. Tiger·tec Gold coated carbide Designed for steel (ISO P) Triangular 60° form, 1.6 mm corner radius Improved productivity through optimised coating and grade The Tiger·tec Gold technology in this insert delivers a coated carbide structure designed to reduce wear and maintain a sharper cutting edge over longer cycles. As a result, the tool shows improved life in continuous production environments and reduces tool-change frequency. The WPP10G grade is calibrated for steel (ISO P) machining, addressing typical heat and chip-formation behaviour encountered in unalloyed and alloyed steels. For production managers this translates into more predictable tool life and fewer interruptions to machining schedules. Geometry that stabilises cutting and chip behaviour The triangular 60° shape combined with a 1.6 mm corner radius and the HU3 chipbreaker provides robust edge strength and reliable chip formation. The insert’s 0° negative rake enhances mechanical stability at the cutting edge, which is especially beneficial for heavier cuts or interrupted machining. The HU3 chipbreaker is designed to control chip curl and fracture under varying feed conditions, reducing the risk of chip re-cutting and helping to secure surface quality and cycle-time consistency. Practical integration and machining advantages With tolerance class M and an inscribed circle of 22 mm, this insert fits standard triangular toolholders while offering the dimensional reliability required for repeat production. The thickness 4.0 mm (code 04) supports rigidity in the cutting zone, helping to reduce vibration in moderate to heavy-duty turning. The combination of grade and geometry makes the insert suitable for a wide range of turning tasks—from medium finishing to robust roughing—where steady performance and predictable outcomes are priorities. Contact Metav Werkzeuge for tailored cutting data and order assistance for Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMM220416-HU3-WPP10G-WALTER Type: Turning indexable insert Brand: Walter Tools ISO designation: TNMM220416-HU3 WPP10G Core specifications Corner radius: 1.6 mm Inscribed circle: 22 mm Thickness: 4.0 mm (code 04) Relief angle: 0° (negative) Shape: Triangle 60° Materials & features Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: HU3 Tolerance class: M Suitable for: Steel (ISO P) FAQ What materials is this insert suitable for? The TNMM220416-HU3 WPP10G is designed primarily for steel (ISO P) machining; the WPP10G grade and Tiger·tec Gold coating address the heat and chip-formation characteristics typical of steel. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP10G grade enhances wear resistance and edge stability, which supports longer tool life and more consistent machining results with Walter Tools inserts. When is a 0° negative rake recommended? A 0° negative rake is advantageous for operations requiring a strong cutting edge and resistance to impact or vibration; the TNMM220416-HU3 configuration helps secure edge integrity during tougher cuts. How does the HU3 chipbreaker affect surface finish? The HU3 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of chip re-cutting and helping to maintain consistent surface quality during varying feeds. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools. The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group.
TNMM220416-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP20G grade and the HU3 chipbreaker for reliable steel turning performance; order the insert directly via Metav Werkzeuge or ask the consultants for cutting-data recommendations. TNMM220416-HU3 WPP20G turning insert (for steel) – Walter Tools A TNMM220416-HU3 WPP20G triangular 60° turning insert engineered for stable chip control and extended tool life in general steel turning applications Tiger·tec Gold coated for extended tool life WPP20G grade, optimised for steel machining Triangle 60° insert with 1.6 mm corner radius HU3 chipbreaker for stable chip control Higher productivity through consistent wear resistance The combination of the Tiger·tec Gold coating and the WPP20G carbide grade is designed to provide consistent tool life when machining steels. The coating system reduces abrasive wear and improves thermal resistance, so cutting performance remains predictable over longer tool lives. This reliability translates into fewer insert changes, lower process interruptions and improved machine uptime. The result is an increase in overall machining productivity while maintaining repeatable dimensional and surface-quality outcomes. Better surface finish and chip management for safer cycles The HU3 chipbreaker together with the triangular 60° geometry and 1.6 mm corner radius is configured to produce controllable chip forms when turning unalloyed and alloyed steels. Stable chip formation lowers the risk of built-up edge and improves surface integrity, which reduces the need for secondary finishing operations. For operators and process planners, the improved chip flow simplifies handling and minimises downtime caused by chip-related disturbances, contributing to a safer and more efficient workshop environment. Straightforward integration into standard toolholders The ISO-style designation indicates compatibility with common clamping systems, which allows the insert to be used in many established turning toolholders without special adapters. The coated-carbide construction is suited to conventional cutting speeds for steel machining and is intended to balance toughness and wear resistance. Technical data such as geometry, negative relief angle and tolerance class support predictable set-up and repeatable results across series production runs, enabling process standardisation and simpler inventory management. Application advice and practical support for process optimisation For steel applications, the WPP20G grade is intended to address the typical heat and chip characteristics of this material group, offering a compromise between wear resistance and toughness. Cutting parameters should be selected according to the specific alloy and workpiece condition; when higher demands on tool life or finish are required, process trials under controlled conditions are recommended. If additional technical data or tailored cutting recommendations are needed, Metav Werkzeuge provides consultation and can supply recommended speeds, feeds and toolholder suggestions to match production goals. Discuss the suitability of the Tiger·tec Gold WPP20G grade with Metav Werkzeuge to optimise steel turning processes and secure the TNMM220416-HU3 insert for the production environment. Technical data Article number: TNMM220416-HU3-WPP20G-WALTER Product type: Turning insert (indexable) Brand: Walter Tools Series: Tiger·tec Gold Facts Plate size: 22 Plate thickness code: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Geometry: Triangle 60° Tolerance class: M Special features Grade: WPP20G Chipbreaker: HU3 Coating / substrate: Coated carbide Material application: Steel (P) Execution: M ISO designation: TNMM220416-HU3 WPP20G FAQ What materials is this insert suitable for? The TNMM220416-HU3 WPP20G insert is specified for machining steels and the WPP20G grade is optimised for the thermal and chip-formation characteristics typical of that material group. How does the HU3 chipbreaker affect machining? The HU3 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which enhances surface quality and reduces interruptions related to poor chip control. What advantages does the Tiger·tec Gold series offer? Tiger·tec Gold coating improves wear resistance and thermal stability, which helps to ensure consistent tool life and reliable performance in continuous turning operations. Is the geometry compatible with common toolholders? The ISO-style TNMM designation indicates compatibility with widely used toolholders for triangular 60° inserts, simplifying tool change and replacement. What does the 1.6 mm corner radius mean for part quality? A 1.6 mm corner radius balances edge strength and surface finish, providing robust cutting edges for general turning while maintaining good surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
TNMM270612-HU3 WPP20G WPP20G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP20G grade delivers extended edge life and consistent performance in steel turning; the robust HU3 chipbreaker ensures controlled chip formation for predictable machining. Order directly via Metav Werkzeuge or consult our specialists for tailored application advice. TNMM270612-HU3 WPP20G Triangle Turning Insert for Steel — Walter Tools The TNMM270612-HU3 WPP20G is a 60° triangle turning insert designed for reliable, high‑productivity machining of steels, featuring a Tiger·tec Gold coated carbide grade and an HU3 chipbreaker for stable chip control. Tiger·tec Gold coated carbide for long tool life Optimised HU3 chipbreaker for controlled chips Triangle 60° form with 1.2 mm corner radius Designed for steel machining, grade WPP20G Higher throughput and predictable tool life for steel turning The coated carbide grade WPP20G, part of the Tiger·tec Gold series, is engineered for machining steels (ISO group P) where consistent wear behaviour and wide material coverage are essential. The combination of a wear‑resistant coating and a universal toughness balance enables higher cutting parameters without sacrificing edge security, resulting in improved productivity and lower tooling cost per component. The HU3 chipbreaker is tuned to promote short, controlled chips in typical steel cutting conditions, reducing the risk of entanglement and making chip handling more predictable on automated machines. Robust geometry for stable cuts and repeatable surface quality The insert’s triangle 60° geometry with a 1.2 mm corner radius provides a reliable edge for general turning tasks and intermittent cuts. A 0° negative rake increases edge strength, which is beneficial for interrupted cuts or heavy‑duty turning where robustness is required over light‑finishing characteristics. These geometric choices contribute directly to process stability: the larger corner radius increases flank support and extends edge life, while the insert form offers multiple indexable positions to maximise usable cutting edge per insert. Practical application notes and mounting considerations This turning insert is supplied in the designation TNMM270612‑HU3 and is compatible with standard toolholders that accept TNMM triangular inserts. The thickness code 06 and insert size 27 are industry‑standard identifiers to ensure correct seating and clamp fit in compatible turning tool bodies. For best results on steels, start with conservative cutting parameters and increase feed or speed while monitoring tool wear; the WPP20G grade is designed to balance wear resistance and toughness across a broad range of steel alloys, helping to maintain surface finish and dimensional stability over extended runs. For demanding steel turning where edge life and chip control matter, request the Walter Tools TNMM270612‑HU3 WPP20G via Metav Werkzeuge for fast supply and application support: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TNMM270612-HU3-WPP20G-WALTER Designation: TNMM270612-HU3 WPP20G Product type: Turning insert Manufacturer/brand: Walter Tools Facts Insert size: 27 mm Corner radius: 1.2 mm Thickness code: 06 Plate form: Triangle 60° Rake: 0° (negative) Special features Series: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: HU3 Application group: Steel (ISO P) Tolerance class: M Execution: M FAQ What materials is this insert intended for? The TNMM270612‑HU3 WPP20G is specified for steel machining (ISO group P); the WPP20G grade and Tiger·tec Gold technology are optimised for the temperatures and chip behaviour typical of steel turning. Which chip behaviour can be expected with the HU3 breaker? The HU3 chipbreaker promotes short, controllable chips in steel turning operations, improving chip evacuation and reducing the likelihood of chip entanglement when using the Walter Tools TNMM270612‑HU3 WPP20G. Is the insert suitable for interrupted cuts or heavy‑duty turning? Yes; the 0° negative rake and the 1.2 mm corner radius provide enhanced edge strength and support, making this insert appropriate for interrupted cuts and more robust turning applications. How many edges are available per insert and what is the form factor? The triangular 60° form supplies multiple indexable edges per insert; the designation TNMM270612‑HU3 indicates the standard triangular insert geometry compatible with matching TNMM toolholders. The Walter AG (brand: Walter Tools) with headquarters in Tübingen belongs to the worldwide leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Products are original, factory‑new items of the manufacturer; there is no connection between our company and the referenced brands.
TNMM270616-HU7 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold cutting grade and the HU7 chipbreaker to increase productivity and process stability when machining steel; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific parameter settings. TNMM270616-HU7 WPP20G turning insert (Triangle 60°, r1.6) — Walter Tools The TNMM270616-HU7 WPP20G is a triangular indexable turning insert for steel machining, combining the Tiger‑tec Gold coating with an HU7 chipbreaker for consistent chip control and extended tool life. Tiger‑tec Gold coating for enhanced wear resistance Optimised HU7 chipbreaker for reliable chip control Triangle 60° form for stable insert seating Corner radius 1.6 mm for robust cutting edge Greater throughput with a wear-resistant cutting grade The coated carbide technology Tiger‑tec Gold paired with the WPP20G grade focuses on extending tool life and sustaining cutting performance in demanding steel applications. The coating reduces flank wear and improves resistance to abrasive and adhesive mechanisms that shorten tool life; as a result, cycle times can be increased while maintaining dimensional stability. The HU7 chipbreaker is designed to manage chips typical of ISO group P (steel), which means more predictable swarf behaviour and fewer interruptions for chip removal. These technical choices translate directly into measurable efficiency gains on the shop floor and reduced tooling costs per component. Predictable process reliability through geometry and edge strength Mechanical stability stems from the insert geometry: the triangle 60° form provides three usable cutting edges per indexation and a secure seat in standard triangular toolholders, while the corner radius 1.6 mm supports robust edge strength for interrupted cuts and higher feed rates. The 0° negative rake indicated for this insert favours heavy‑cut operations and reduces the risk of edge chipping when forces are high. Together, these characteristics enable a repeatable process window and improve first‑part accuracy—important for batch production where consistency is critical. Practical selection and machining guidance for steel applications The cutting grade and chipbreaker are optimised for unalloyed and alloyed steel according to ISO group P. When selecting cutting parameters, start from conservative speeds and feeds recommended for coated carbide in steel and increase speed until tool‑life or surface finish objectives are met. The combination of Tiger‑tec Gold coating and the HU7 chipbreaker favours medium to high cutting speeds with stable chip segmentation. For special steels, high alloy content, or unusual geometries, seek customised feed and speed recommendations to exploit the insert’s balance of wear resistance and toughness—Metav Werkzeuge can assist with cutting data sheets and trial‑cut guidelines. For machining operations that demand consistent performance in steel, specify the Walter Tools TNMM270616-HU7 WPP20G with Tiger‑tec Gold; contact Metav Werkzeuge for procurement and expert parameter advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMM270616-HU7-WPP20G-WALTER Designation: TNMM270616-HU7 WPP20G Manufacturer: Walter Tools Product type: Turning insert Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: HU7 Facts Corner radius: 1.6 mm Plate size: 27 Plate thickness: 06 Rake angle: 0° (negative) Plate form: Triangle 60° Tolerance class: M Special features Coated carbide (beschichtetes Hartmetall) Optimised for ISO group P (steel) Execution: M Suitable for medium to high cutting speeds Three usable cutting edges per insert FAQ Which materials is this insert suitable for? The TNMM270616-HU7 WPP20G is specified for ISO group P—primarily unalloyed and alloyed steel—and the grade and chipbreaker are optimised for the heat and chip characteristics of these materials. What does the WPP20G cutting grade offer? WPP20G is Walter Tools’ coated carbide grade within the Tiger‑tec Gold family, engineered to balance wear resistance and toughness for productive steel machining. How does the HU7 chipbreaker affect chip control? The HU7 chipbreaker produces short, controllable chips when cutting steel, improving swarf evacuation and reducing the risk of entanglement in typical turning operations. Can this insert be used for stainless steel or hardened materials? Stainless steel and hardened materials are not listed among the specified applications for this insert; the TNMM270616-HU7 WPP20G is optimised for steel. For other material groups, consult Metav Werkzeuge for alternative grades and geometries. What cutting geometry is required in the toolholder? A triangular 60° seat suitable for TNMM‑style inserts is required; the form provides stable seating and three indexable edges for economical use. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; no affiliation is claimed. The offered item is an original, brand‑new product from Walter Tools.
TNMM270616-HU7 WPP30G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the HU7 chipformer delivers high process reliability and extended tool life for steel turning; benefit from consistent chip control and stable edge performance. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. TNMM270616-HU7 WPP30G indexable turning insert by Walter Tools — Tiger·tec Gold, triangle 60°, r=1.6 mm TNMM270616-HU7 WPP30G is an indexable turning insert designed for productive steel machining with a Tiger·tec Gold coated carbide grade Tiger·tec Gold coated carbide grade WPP30G Optimised chipformer HU7 for stable chips Triangle 60° geometry, r=1.6 mm Negative 0° rake for robust cutting Boosted productivity for steel turning through coating technology The Tiger·tec Gold coating together with the WPP30G grade provides a balanced combination of wear resistance and toughness optimised for steel (P) machining. This results in more consistent cutting edges and longer tool life, which reduces interruptions and increases uptime on CNC lathes. The coated carbide substrate improves heat resistance during conventional turning, making the insert suitable for operations where both surface finish and economy matter. Reliable geometry for reproducible results and secure clamping The triangle 60° shape offers three usable cutting edges per insert and, combined with the negative 0° rake, provides a robust cutting geometry that resists chipping under interrupted cuts. The corner radius 1.6 mm supports stable engagement with the workpiece and contributes to a reproducible surface finish. These geometric choices support repeatable machining cycles and make tool set-up straightforward for production environments. Consistent chip control and easy integration into turning systems The dedicated chipformer HU7 promotes predictable chip formation when machining steel, reducing the risk of entanglement and improving swarf evacuation. The insert’s dimensions — 27 mm inscribed circle and a standard thickness — match common toolholder interfaces, enabling quick integration into existing tool systems. Overall, the insert targets process security and economical material removal rates, favouring shops that value consistent throughput and low rework rates. For reliable steel turning with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for tailored advice and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TNMM270616-HU7-WPP30G-WALTER Designation: TNMM270616-HU7 WPP30G Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Facts Inscribed circle: 27 mm Corner radius: 1.6 mm Thickness: 6 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP30G Chipformer: HU7 Shape: Triangle 60° Material application: Steel (P) Execution: M FAQ What materials is this insert intended for? The TNMM270616-HU7 WPP30G insert is formulated for machining steel (P) according to ISO material groupings; the WPP30G grade addresses common steel cutting challenges such as heat and chip formation. How does the HU7 chipformer improve machining? The HU7 chipformer on this Walter Tools insert shapes chips into manageable forms during steel turning, reducing the risk of swarf build-up and improving process stability in continuous and interrupted cuts. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating offers a balance of wear resistance and toughness, increasing edge life and enabling more consistent results when turning steel components with the TNMM270616-HU7 WPP30G. Is the triangular geometry advantageous for production runs? Yes — the triangle 60° geometry provides three cutting edges per indexable insert, which supports economical edge usage and quick index changes in high-volume turning operations. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group. Brand names and trademarks are mentioned for explanatory purposes only and remain the property of their respective owners. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
TNMU11T304R-G27 WKK25G Wendeplatten - Walter Tools
Benefit from a robust combination of wear resistance, stable chip control and process security for reliable cast iron milling; order directly via Metav Werkzeuge or consult the sales team for application support. TNMU11T304R-G27 WKK25G Fräswendeschneidplatte – indexable milling insert for cast iron, Tiger·tec Gold (Walter Tools) The TNMU11T304R-G27 WKK25G is an indexable milling insert optimised for machining cast iron, delivering consistent chip control and long tool life in industrial milling applications Tiger·tec Gold coating for extended tool life Optimised for cast iron (ISO group K) Triangle 60° geometry, 11 mm size Chipbreaker G27 for short, controlled chips Maximum process reliability through advanced coating and grade The combination of Tiger·tec Gold coating and the WKK25G grade offers high resistance to abrasive wear typical in cast iron machining, which translates into fewer insert changes and more productive machining cycles. The coated carbide structure provides a consistent cutting edge, reducing flank wear and maintaining dimensional accuracy over longer runs. For production environments that prioritise uptime, this cutting grade improves the cost‑per‑component ratio by extending effective tool life. Stable cutting geometry for predictable milling results A triangle 60° form with a 0.4 mm corner radius and T3 thickness gives structural rigidity and repeatable cutting performance in interrupted or heavy cuts. The 0° (negative) rake promotes a robust cutting edge that resists chipping under shock and vibration, supporting stable feed rates and surface finish. These geometric attributes help to maintain tool stability when taking deeper passes or when machining complex cast components that produce fluctuating cutting forces. Chip control and shop‑floor productivity The integrated chipbreaker G27 is designed to produce short, easily evacuated chips when machining cast iron, lowering the risk of recutting and tool damage. Better chip formation reduces cycle interruptions and improves machine cleanliness, which in turn minimises non‑productive time. The insert’s design contributes to more predictable tool life and efficient setup changes, supporting higher overall equipment effectiveness and a faster return on tooling investments. Material suitability and practical application guidance This indexable insert is made for the ISO group K (cast iron); the grade adapts to the abrasive nature and tendency to form short, brittle chips in grey and nodular cast irons. For best results, use stable clamping and a rigid toolholder, select coolant strategy according to the casting type, and adjust feeds to match the desired chip thickness. The insert is particularly suited to roughing and medium finishing passes where process security and repeatability are priorities. For high‑performance cast iron milling with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for product availability and tailored application advice. Technical data SKU: TNMU11T304R-G27-WKK25G-WALTER Article designation: TNMU11T304R-G27 WKK25G Series: Tiger·tec Gold Grade: WKK25G Core data Shape: Triangle 60° Size: 11 mm Thickness: T3 Corner radius: 0.4 mm Free rake: 0° (negative) Chipbreaker: G27 Tolerance class: M Special features Coating: Tiger·tec Gold Coated carbide grade Suited for ISO group K (cast iron) Robust negative rake for stability Designed for short, breaking chips FAQ What materials is this insert intended for? The TNMU11T304R-G27 WKK25G insert is intended primarily for cast iron machining (ISO group K), offering optimised wear resistance and chip control for grey and nodular cast irons. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WKK25G grade increases resistance to abrasive wear, extending tool life and reducing insert changes during production runs. Which chipbreaker should be used for shorter chips in cast iron? The G27 chipbreaker integrated in this insert promotes short, controlled chips suitable for cast iron, improving evacuation and reducing the risk of recutting. What does the 0° (negative) rake mean for cutting performance? A 0° (negative) rake produces a stronger cutting edge that withstands shock and vibration better than positive rake geometries, favouring stability in interrupted cuts or heavy milling. Is the insert suitable for finishing as well as roughing? This insert is optimised for roughing and medium finishing in cast iron; selection of feeds and depths of cut should be adapted to achieve the required surface finish. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
TNMU11T304R-G27 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for stable, productive milling of steel and cast iron; the triangle 60° geometry with a 0.4 mm corner radius ensures repeatable edge security and good surface finish. Order directly via Metav Werkzeuge or request tailored advice from our technical consultants to match the insert to the machining task. TNMU11T304R-G27 WKP25S Fräswendeschneidplatte by Walter Tools — Triangle 60°, Tiger·tec Silver The TNMU11T304R-G27 WKP25S is a triangle‑shape milling insert designed for productive machining of steel and cast iron, combining a negative 0° relief with Tiger·tec Silver coating for robust wear resistance Tiger·tec Silver coated grade WKP25S For steel (P) and cast iron (K) machining Triangle 60° shape with 0.4 mm corner radius Negative 0° relief for stable cutting Consistent chip control for efficient production The Tiger·tec Silver coating paired with the WKP25S grade provides a balance between wear resistance and toughness that promotes stable cutting over long tool lives. Coated carbide grades handle the heat and abrasive conditions typical when machining unalloyed or alloyed steel and cast iron; this reduces flank wear and preserves cutting geometry for longer intervals. The G27 chipbreaker is engineered to guide and break chips predictably, which shortens downtime for chip clearing and minimises the risk of rework due to poor chip evacuation. This results in measurable productivity gains on batch and continuous operations. Geometry that supports repeatable accuracy and surface quality The triangle 60° configuration with a 0.4 mm corner radius delivers a secure seating and three cutting edges per insert, optimising tool usage and cost per edge. The negative 0° relief contributes to a robust cutting edge that resists chipping under interrupted cuts or heavy engagement, making the insert suitable for operations where edge security is prioritised. For customers focused on surface finish, the combination of geometry and coating promotes consistent surface quality by reducing vibration and maintaining a sharp cutting line for longer periods. Clear material range and application guidance This grade is intended for steels (designation P) and cast irons (designation K) according to ISO 513 classifications. Coated hardmetal construction gives the insert the abrasion resistance needed for cast iron and the thermal stability demanded by steel cutting. When planning an operation, select cutting data (speeds, feeds and depths of cut) in line with workpiece alloy and rigidity; the insert’s design supports medium to heavy-duty milling where process security and repeatable results are required. For atypical alloys or very high hardness ranges, consult the technical data sheet to confirm suitability. Designed for shop-floor reliability and simple inventory management With three usable edges per triangle insert and a standardised geometry, the insert helps to simplify tool scheduling and reduce the number of variants kept in stock. The coated carbide construction and the Tiger·tec Silver technology are intended to deliver consistent performance across series parts, lowering the frequency of unscheduled tool changes. For operations seeking predictable throughput and reduced tooling overhead, this insert offers a balance of productivity and operational reliability that supports efficient process planning. For precision milling needs with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for application advice and supply options tailored to the machining task. Technical Data Article number: TNMU11T304R-G27-WKP25S-WALTER Name: TNMU11T304R-G27 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Size: 11 Thickness: T3 Corner radius: 0.4 mm Relief angle: 0° (negative) Insert shape: triangle 60° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP25S (coated carbide) Suitable for: Steel (P), Cast iron (K) Chipbreaker: G27 Design: triangle geometry for three cutting edges Application focus: process stability and surface quality FAQ What materials is this insert suitable for? The insert is designed for machining steel (P) and cast iron (K) according to ISO classifications; the Tiger·tec Silver coating and WKP25S grade suit these material groups. How does the triangle 60° geometry affect tool life? Triangle 60° geometry provides three indexable cutting edges per insert and a secure seat, which increases usable life per insert and supports repeatable edge positioning. Is the insert appropriate for interrupted cuts? Yes. The negative 0° relief and robust coated carbide grade give the insert enhanced edge security for interrupted and heavy milling situations. What benefit does the G27 chipbreaker provide? The G27 chipbreaker is engineered for controlled chip formation and evacuation, reducing the risk of long or tangled chips and supporting consistent surface quality. Can this insert be used for finishing and roughing operations? The insert’s geometry and coating enable both stable roughing and fine finishing when cutting data and machine rigidity are adjusted to the task. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is headquartered in Tübingen.
TNMU11T304R-G27 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for consistent edge life and stable chip control in steel and cast iron milling; order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNMU11T304R-G27 WKP35G milling insert — Triangle 60°, Tiger·tec Gold (Walter Tools) The TNMU11T304R-G27 WKP35G is a triangular milling insert engineered for high-productivity machining of steel and cast iron, offering robust edge life and reliable chip control in demanding production environments. Tiger·tec Gold coating for stable cutting WKP35G grade for steel and cast iron Triangle 60° form with 0.4 mm corner radius Negative 0° free angle for strong edge support Consistent productivity through advanced grade and coating The combination of Tiger·tec Gold technology and the WKP35G grade delivers a precisely tuned balance between wear resistance and toughness. Designed for the thermal and mechanical loads typical of milling steel and cast iron, the coating reduces abrasive wear while the substrate maintains a stable cutting edge. This results in fewer insert changes, reduced downtime and a measurable improvement in throughput for series production. The outcome is a cost-effective solution for shops seeking predictable tool life and repeatable results. Geometry that supports reliable surface quality and tool life The insert’s triangle 60° form and 0.4 mm corner radius provide a versatile geometry suitable for a broad range of shoulder and slot milling tasks. The negative 0° free angle increases edge support for interrupted cuts and heavy engagement, reducing chipping risk under fluctuating loads. The M tolerance class ensures dimensional consistency in toolholders and fixtures, so setup times stay short and repeatability improves. For practical planning, the T3 thickness offers a balance between rigidity and the number of available cutting edges per insert. Chip control and process integration for efficient milling The dedicated G27 chipbreaker is optimised for the typical chip forms produced when machining steel and cast iron, promoting continuous evacuation and stable cutting forces. This leads to lower heat concentration at the cutting edge and improved surface quality on the workpiece. Integration into milling routines is straightforward: select speeds and feeds tuned to the workpiece and toolholder rigidity, and the insert will contribute to higher material removal rates with predictable performance. If more detailed cutting data is required, Metav Werkzeuge can supply application recommendations to align the insert with specific machines and operations. Contact Metav Werkzeuge for tailored application advice and secure supply of Walter Tools TNMU11T304R-G27 WKP35G inserts through Metav Werkzeuge for reliable delivery and technical guidance. Technical data SKU: TNMU11T304R-G27-WKP35G-WALTER Article number / designation: TNMU11T304R-G27 WKP35G Manufacturer: Walter Tools Facts Insert size: 11 Thickness: T3 Corner radius: 0.4 mm Shape: Triangle 60° Free angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: G27 Applicable material groups: P (steel), K (cast iron) Execution: U ISO designation: TNMU11T304R-G27 WKP35G FAQ What materials is this insert best suited for? The TNMU11T304R-G27 WKP35G milling insert from Walter Tools is optimised for machining steel and cast iron, with the WKP35G grade and Tiger·tec Gold coating designed to handle the associated heat and abrasive characteristics. What does the G27 chipbreaker do? The G27 chipbreaker on this milling insert is configured to control chip shape and evacuation during milling of steel and cast iron, which helps maintain stable cutting forces and improves surface finish when using the TNMU11T304R-G27 WKP35G. How does the insert geometry affect operation? The triangle 60° geometry with a 0.4 mm corner radius offers a good compromise between strength and versatility; combined with the negative 0° free angle, the insert provides enhanced edge support for interrupted cuts and heavy radial engagement in Walter Tools milling applications. Is the insert suitable for heavy-duty milling? Yes, the TNMU11T304R-G27 WKP35G, with its Tiger·tec Gold coating and robust geometry, is intended for productive milling operations where durability and consistent performance are required in production environments. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands mentioned. The offered item is an original, brand-new product from the manufacturer.
TNMU11T304R-G27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a dedicated G27 chipbreaker for steel and compact 60° triangular geometry to improve process stability and part quality; order the insert directly via Metav Werkzeuge or consult the team for cutting parameters and application advice. TNMU11T304R-G27 WPP35G — milling indexable insert for steel — Walter Tools TNMU11T304R-G27 WPP35G is a coated triangular milling insert designed for efficient machining of steels, combining Walter Tools' Tiger·tec Gold grade with a performance-oriented chipformer. Tiger·tec Gold coating for improved wear Optimised G27 chipbreaker for steel Triangle 60° insert, 11 mm inscribed circle 0.4 mm corner radius, 0° negative geometry Stable performance for steel milling and predictable tool life The WPP35G grade, part of the Tiger·tec Gold series, is a coated cemented carbide developed for the thermal and chip-forming conditions typical of steel machining (ISO group P). Its coating and substrate balance offers improved wear resistance and stable chip formation, which leads to more predictable tool life and fewer unscheduled tool changes. The result is improved uptime and a consistent surface finish on workpieces made from a wide range of steels, from unalloyed to alloyed grades. Compact triangular geometry for secure clamping and reproducible results A 60° triangular form with an 11 mm inscribed circle and T3 plate thickness provides a compact but stable seating in the cutter body. The 0.4 mm corner radius combines edge strength with acceptable edge roundness for finishing applications, while the 0° negative rake contributes to robust cutting-edge behaviour under interrupted cuts. These geometry choices reduce vibration and help maintain repeatable outcomes across batches, supporting tight tolerance production and surface-quality requirements. Chip control and process reliability for higher productivity The integrated G27 chipbreaker is optimised for steel: it breaks and evacuates chips reliably under typical cutting conditions for this material group, reducing recutting and heat concentration at the cutting edge. The insert’s tolerance class M ensures consistent fit in standard toolholders, which, together with the Tiger·tec Gold coating, supports process security and fewer regrinds. For production environments where shift-to-shift consistency matters, this combination contributes to predictable tool-change intervals and stable cycle times. Practical selection and application guidance The insert is supplied in the Walter Tools Tiger·tec Gold family and is intended for machining steels (ISO P). For component-specific optimisation, select cutting speeds and feeds that reflect the workpiece steel grade, depth of cut and machine rigidity; use the G27 chipformer for general-purpose milling in mixed production batches. For advice on matching the insert with cutter bodies and fixtures, Metav Werkzeuge can supply data sheets and recommended parameter sets to help integrate the insert into existing machining processes. Contact Metav Werkzeuge for application-specific recommendations and to request a quote for the Walter Tools TNMU11T304R-G27 WPP35G milling insert; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: TNMU11T304R-G27-WPP35G-WALTER Product: Milling indexable insert (fräswendeschneidplatte) Designation: TNMU11T304R-G27 WPP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Facts Inscribed circle: 11 mm Corner radius: 0.4 mm Thickness: T3 Geometry: Triangle 60° Free angle: 0° (negative) Chipbreaker: G27 Tolerance class: M Special features Coating: Tiger·tec Gold (coated cemented carbide) Material group suitability: Steel (ISO P) Execution: U Sort category: WPP35G — coated carbide optimised for steel Application focus: stable chip formation and wear resistance FAQ What materials is the insert suited for? The TNMU11T304R-G27 WPP35G insert is designed primarily for steel (ISO P) applications and performs well across unalloyed and alloyed steel grades. How does the G27 chipbreaker affect machining? The G27 chipbreaker provides controlled chip segmentation and evacuation when machining steel, reducing recutting and improving surface quality with the WPP35G grade. What does the 0° negative free angle mean in practice? A 0° negative free angle increases edge strength and makes the insert more tolerant of heavy or interrupted cuts, enhancing reliability in demanding milling operations. Which cutter body and clamping should be used with this insert? Use a compatible triangular-pocket milling body sized for an 11 mm inscribed circle and a T3 plate thickness; ensure correct seating to maintain the insert’s M tolerance-class positioning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification; there is no affiliation between our company and the trademark owners. The offered item is original and factory-new from the manufacturer.
TNMU11T304R-G27 WSP45G Wendeplatten - Walter Tools
TNMU11T304R-G27 WSP45G Fräswendeschneidplatte von Walter Tools TNMU11T304R-G27 WSP45G eignet sich für produktives Fräsen in Stahl, rostfreiem Stahl sowie hitzebeständigen Superlegierungen und Titan und kombiniert stabile Spanbildung mit langlebiger PVD-Beschichtung. Dreieck 60° für universelle Fräsaufgaben Eckenradius 0,4 für präzise Konturen Freiwinkel 0° (negativ) für sichere Schneidkante Tiger·tec Gold Beschichtung für hohe Standzeit Geeignet für Stahl, rostfreier Stahl und Superlegierungen Hohe Prozesssicherheit und Materialabdeckung Die WSP45G ist eine vielseitige PVD-Sorte aus der Serie Tiger·tec Gold, entwickelt für anspruchsvolle Fräsanwendungen. Durch die Kombination aus beschichtetem Hartmetall und optimierter Schneidstoffgeometrie wird eine zuverlässige Spanbildung erzielt, was die Prozesssicherheit erhöht. Anwender profitieren von konstanter Bearbeitungsqualität bei variierenden Schnittbedingungen und reduzierten Stillstandszeiten. Geometrie für stabile Spanführung und wiederholgenaue Ergebnisse Die Dreiecksform mit 60° und der Eckenradius 0,4 ermöglichen präzise Bearbeitung von Konturen und Einstichen. Der negative Freiwinkel 0° unterstützt eine robuste Schneidkantenbelastung und sorgt in Kombination mit dem Spanbrecher G27 für kontrollierte Spanabfuhr. Diese Auslegung reduziert Aufbauschneiden und verlängert die Werkzeugstandzeit. Zielgruppe und typische Einsatzfelder Die Wendeschneidplatte richtet sich an Lohnfertiger, Serienproduktionen in der Automobil- und Zulieferindustrie sowie an Betriebe in der Luftfahrt, die rostfreie Stähle und hitzebeständige Werkstoffe fräsen. Die Sorte ist besonders geeignet, wenn gleichbleibende Oberflächengüten und reproduzierbare Ergebnisse gefragt sind. Beschichtung und Schneidstoffvorteile Die Tiger·tec Gold-Technologie liefert eine verschleißfeste, zähe Beschichtung, die thermische Belastungen besser abfängt und die Standzeit verbessert. Damit eignet sich die Wendeschneidplatte besonders für schwer zerspannbare Werkstoffe und Anwendungen mit hoher thermischer Belastung. Empfehlung: Für produktive Fräsprozesse die TNMU11T304R-G27 WSP45G von Walter Tools wählen; bei Fragen zur Einspanntiefe, Schnittdaten oder zur optimalen Einsatzstrategie Kontakt aufnehmen unter 📧 info@metav-werkzeuge.com oder ☎️ +49 2822 7131930 Leistungsmerkmale Artikelnummer: TNMU11T304R-G27-WSP45G-WALTER Marke: Walter Tools Bezeichnung: TNMU11T304R-G27 ISO-Bezeichnung: TNMU11T304R-G27 WSP45G Sorte: WSP45G Serie: Tiger-tec Gold Produktart: Fräswendeschneidplatte Fakten Plattengröße: 11 Plattendicke: T3 Eckenradius: 0,4 Freiwinkel: 0° (negativ) Plattenform: Dreieck 60° Toleranzklasse: M Besonderheiten Spanbrecher: G27 Material: beschichtetes Hartmetall Materialanwendung: P / M / S (P = Stahl, M = rostfreie Stähle, S = hitzebeständige Superlegierungen und Titan) Baureihe: Tiger·tec Gold Ausführung: U FAQ Welche Werkstoffe eignen sich für die TNMU11T304R-G27 WSP45G? Die TNMU11T304R-G27 WSP45G von Walter Tools ist ausgelegt für Stahl, rostfreie Stähle und hitzebeständige Superlegierungen/Titan und bietet dafür stabile Spanbildung und lange Standzeit. Wie beeinflusst der Eckenradius 0,4 die Bearbeitung? Der Eckenradius 0,4 sorgt für präzisere Konturen und gleichmäßigere Schnittkräfte, wodurch die Schneidkante der Walter Tools Wendeschneidplatte geschont wird. Wann ist der negative Freiwinkel 0° sinnvoll? Ein negativer Freiwinkel von 0° erhöht die Kantenschonung bei hoch belasteten Fräsoperationen und stabilisiert die Schneidkantenleistung bei der TNMU11T304R-G27 WSP45G. Was zeichnet die Tiger·tec Gold Beschichtung aus? Die Tiger·tec Gold Beschichtung bietet verschleißfesten Schutz und Wärmebeständigkeit, was besonders bei zähen oder hitzeempfindlichen Werkstoffen die Standzeit verbessert. Wie unterstützt der Spanbrecher G27 die Spanabfuhr? Der Spanbrecher G27 formt kompakte, kontrollierte Späne, die das Späneservice erleichtern und die Oberflächenqualität bei der Fräsbearbeitung steigern. Hersteller: Walter Tools Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMU11T304R-G57 WKP25S Wendeplatten - Walter Tools
Take advantage of a proven Tiger‑tec Silver coating and the wear‑resistant WKP25S grade for reliable, economical milling of steel and cast iron; the insert’s triangle 60° geometry with a 0.4 mm corner radius offers multiple indexing options and stable chip control. Order the TNMU11T304R-G57 WKP25S directly via Metav Werkzeuge or consult our specialists for application advice. TNMU11T304R-G57 WKP25S — Indexable Milling Insert, Tiger‑tec Silver, for Steel and Cast Iron (Walter Tools) TNMU11T304R-G57 WKP25S is an indexable milling insert designed for robust general‑purpose milling in industrial production, optimised for machining steel and cast iron components Tiger‑tec Silver coated carbide grade WKP25S Suitable for steel (P) and cast iron (K) Triangle 60° geometry, 0.4 mm corner radius Negative rake 0° for secure engagement Consistent material coverage for mixed production runs The combination of a coated carbide grade from the Tiger‑tec Silver series and the WKP25S chemistry provides a broad application window for both steel and cast iron, classified as P and K materials under ISO 513. This design reduces the need for multiple specialised grades and supports mixed production sequences, which helps to maintain throughput and reduce setup complexity. The integrated G57 chipbreaker improves chip formation in short‑breaking and continuous chip conditions typical of these workpiece groups. Robust geometry for predictable tool life and process security A triangle 60° insert shape delivers three indexable cutting edges, enabling economical edge changes and longer life per insert. The 0.4 mm corner radius balances edge strength and surface quality, while the negative rake 0° creates a stable cutting engagement in interrupted or heavy cuts. Together these geometry choices support repeatable machining results and lower the likelihood of unexpected tool failures, contributing to higher overall equipment effectiveness on the shop floor. Coating and grade engineered for abrasion and heat resistance The surface engineering of the insert, using the Tiger‑tec Silver coating technology, enhances thermal and abrasive resistance compared with uncoated grades. The WKP25S specification delivers wear control under the elevated temperatures generated when cutting steel and the abrasive tendencies of cast iron. This combination helps to maintain a reliable cutting edge over longer cycles, which translates into fewer tool changes and improved productivity in continuous machining operations. Integration advantages and operational benefits With a standard ISO TNMU11T304R-G57 designation and compact T3 plate thickness, the insert fits established milling practices and toolholder systems that accept this family of indexable inserts. The tolerance class M ensures consistent fit and indexing accuracy, which aids in maintaining part tolerances across runs. By selecting this insert, operators gain a balance of process reliability and economical edge utilisation, making it well suited to series production as well as jobbing environments where material variety and robustness are priorities. Choose the Walter Tools Tiger‑tec Silver WKP25S insert for predictable milling performance and contact Metav Werkzeuge for tailored application guidance or to request a quotation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TNMU11T304R-G57-WKP25S-WALTER Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Designation: TNMU11T304R-G57 WKP25S Facts Geometry: Triangle 60° Corner radius: 0.4 mm Rake angle: 0° (negative) Plate size: 11 Thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver Material: Coated carbide (WKP25S) Chipbreaker: G57 Application: Steel (P) and cast iron (K) per ISO 513 Series benefit: Broad material coverage and stable chip formation FAQ What materials can this insert machine effectively? The TNMU11T304R-G57 WKP25S is formulated for machining steel (P) and cast iron (K) according to ISO 513, offering effective chip control and wear resistance for these groups. How does the Tiger‑tec Silver coating benefit machining? Tiger‑tec Silver increases thermal and abrasive resistance on the cutting edge of the WKP25S insert, extending tool life and supporting consistent performance in demanding steel and cast iron applications. What is the purpose of the negative rake 0° on this insert? The negative rake of 0° improves edge robustness and stability under heavy or interrupted cutting, which helps reduce chipping and provides predictable cutting behaviour during tough machining tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification purposes. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
TNMU11T304R-G57 WKP35G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating, the robust WKP35G grade and the triangle 60° geometry, this insert provides reliable chip control and extended tool life; order the TNMU11T304R-G57 WKP35G insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. TNMU11T304R-G57 WKP35G milling indexable insert (Tiger‑tec Gold) – Walter Tools, 0° negative, Triangle 60° TNMU11T304R-G57 WKP35G is a coated carbide milling insert designed for efficient machining of steel and cast iron in general milling applications Coated carbide Tiger‑tec Gold technology For steel (P) and cast iron (K) Triangle 60° form, 0.4 mm corner radius Negative 0° relief, stable chip control High-efficiency milling for steel and cast iron The combination of Tiger‑tec Gold coating and the WKP35G grade delivers a balance of wear resistance and thermal stability that benefits high-volume production. As a coated carbide solution, the insert is engineered to withstand the heat and abrasion typical when machining steel and cast iron, enabling consistent cutting performance and reduced frequency of tool changes. This translates into measurable improvements in cycle times and overall productivity for batch or continuous operations. Geometry engineered for predictable chip formation The insert’s Triangle 60° shape and 0° negative relief provide a robust seating and cutting edge stability, while the 0.4 mm corner radius supports both strength and edge life. The G57 chipbreaker is optimised for controlled chip segmentation when working with tougher materials, reducing the risk of chip entanglement and improving surface finish. The geometry and chip control features together mean fewer interruptions and more predictable machining results. Practical advantages for workshop and production planning With a standard thickness of T3 and a stable cutting-edge design, the indexable format enables quick indexing and simple replacement, improving uptime and contributing to cost-efficiency. Predictable wear behaviour under the WKP35G grade supports consistent tool-change intervals, which helps to plan maintenance windows and minimise scrap. For procurement and process planning, Metav Werkzeuge can provide batch supply and technical guidance to match the insert to specific cutters and machining strategies. Application guidance and material compatibility This insert is specified for the ISO groups ISO P and ISO K, meaning it is suited to a wide range of unalloyed and alloyed steels as well as various cast iron grades. The Tiger‑tec Gold coating and grade selection promote reliable performance under the common thermal and mechanical stresses of these workpiece families. When selecting cutting parameters, consider machine rigidity, workholding and coolant strategy to make full use of the insert’s corner radius and chipbreaking features for stable, repeatable results. Contact Metav Werkzeuge to discuss suitability of the Walter Tools Tiger‑tec Gold insert for the application; technical consultants available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TNMU11T304R-G57-WKP35G-WALTER SKU: TNMU11T304R-G57-WKP35G-WALTER Product type: milling indexable insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G ISO designation: TNMU11T304R-G57 WKP35G Facts Insert size: 11 Corner radius: 0.4 mm Relief angle: 0° (negative) Insert form angle: 60° Thickness: T3 Special features Coating technology: Tiger‑tec Gold Material suitability: P (steel), K (cast iron) Chipbreaker: G57 Tolerance class: M Execution: U FAQ What materials is this insert best suited for? The TNMU11T304R-G57 WKP35G insert from Walter Tools is optimised for ISO groups P (steel) and K (cast iron), providing reliable performance on both material families. How does the triangle 60° form affect machining? The triangle 60° geometry offers three cutting edges per insert and a stable seating that suits medium to heavy milling; the design supports consistent chip control and repeatable edge life. What role does the Tiger‑tec Gold coating play? The Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, improving tool life and process reliability when machining steel and cast iron. Is this insert compatible with standard milling cutter bodies? Yes, the TNMU11T304R-G57 WKP35G follows common ISO insert dimensions and fits cutters designed for TNMU-style triangle inserts; verify seat and clamping compatibility before use. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are cited for explanatory purposes only and do not imply any relationship between our company and the named manufacturers. The offered item is an original, brand‑new product from the manufacturer.
TNMU11T304R-G57 WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and a stable triangular 60° geometry to maximise productivity in steel machining; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMU11T304R-G57 WPP35G milling insert (for steel) — Walter Tools The TNMU11T304R-G57 WPP35G is a triangular 60° indexable milling insert optimised for steel machining with a robust coated-carbide grade from the Tiger·tec Gold family. Tiger·tec Gold coating for long tool life Optimised for steel machining (ISO group P) Triangular 60° form, 0.4 mm corner radius Negative 0° rake for stable cutting High wear resistance and reliable grade for steel The insert uses the WPP35G grade within the Tiger·tec Gold series, a coated carbide designed to deliver consistent wear resistance and stable chip formation when machining steels. The grade is classified for the ISO material group P, which covers unalloyed and alloyed steels, and the microstructure of the coating has been developed to withstand the typical heat and abrasion of steel cutting. With a tolerance class M, the component ensures repeatable seating and tool-change accuracy, supporting predictable process results and lower scrap rates. Geometry engineered for productivity and edge security A triangular 60° plate form combined with a 0.4 mm corner radius offers a balance between cutting strength and surface quality. The negative 0° rake provides increased edge robustness, making the insert suitable for heavier engagement and interrupted milling conditions where stability is paramount. The integrated chipbreaker G57 is tuned for controlled chip formation in steel, while the designation Size 11 and T3 thickness provide standard compatibility with common cutter bodies and clamping systems, enabling straightforward integration into existing toolsets. Application benefits: process security and versatile performance Designed specifically for steel work, the insert supports a range of finishing and roughing operations with an emphasis on stable tool life and consistent surface finish. The coated-carbide construction reduces unexpected wear, allowing for longer productive intervals between indexings. For machining centres and high-output shops seeking dependable cycle times, this insert delivers a practical combination of durability and machining performance under industrial conditions, contributing to overall process efficiency and predictable maintenance scheduling. For high-productivity steel milling with Tiger·tec Gold reliability, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TNMU11T304R-G57-WPP35G-WALTER Label: Fräswendeschneidplatte TNMU11T304R-G57 WPP35G Walter Tools Manufacturer: Walter Tools Numbers Size: 11 Thickness: T3 Corner radius: 0.4 mm Free cutting angle: 0° (negativ) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G Chipbreaker: G57 Plate form: Triangular 60° Execution: U Material group: P (Steel) Applicability: Steel machining FAQ What steels is this insert suitable for? The TNMU11T304R-G57 WPP35G insert is intended for the ISO P group, covering unalloyed and alloyed steels, and is optimised for typical steel cutting heat and chip behaviour. How does the Tiger·tec Gold coating help performance? The Tiger·tec Gold coating on the insert improves wear resistance and thermal stability during high-friction steel machining, extending productive tool life and supporting consistent surface quality. Which cutter bodies fit Size 11 T3 plates? Size 11 with T3 thickness corresponds to common milling cutter pockets designed for triangular 60° indexable plates; compatibility should be confirmed with the cutter manufacturer and the TNMU11T304R-G57 WPP35G seat dimensions. Is the geometry suitable for interrupted cuts? Yes, the negative 0° rake and the 0.4 mm corner radius increase edge robustness, making the insert particularly stable under interrupted or heavy-engagement milling conditions. What benefit does the chipbreaker G57 provide? The G57 chipbreaker promotes controlled chip segmentation and evacuation when machining steel, improving surface finish and reducing the likelihood of built-up edge in many industrial milling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
TNMU11T304R-G57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a tough WSP45G grade and compact triangular geometry for consistent chip control and reliable tool life; order via Metav Werkzeuge or request application advice from our specialists. TNMU11T304R-G57 WSP45G – Walter Tools triangular milling insert (Tiger‑tec Gold, 60°) A TNMU11T304R-G57 WSP45G triangular indexable milling insert engineered for high‑performance milling across a wide range of materials, including Stahl, rostfreier Stahl and heat‑resistant alloys. Tiger‑tec Gold PVD coating Suitable for Stahl and rostfreier Stahl Triangle 60° geometry, 0.4 mm corner Negative rake 0° for stable cutting High cutting performance and stable manufacturing results The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers a balanced mix of wear resistance and toughness, making the insert especially suited to demanding milling tasks. The PVD coating reduces flank wear and improves heat resistance, which in turn increases process reliability and extends productive tool life. For production environments that prioritise consistent part quality and predictable regrind intervals, this triangular carbide insert offers measurable gains in cycle stability and reduced downtime. Broad material capability with predictable chip control Designed for versatile use, the grade covers the ISO groups P, M and S — i.e. Stahl, rostfreier Stahl and high‑temperature alloys such as Titan and nickel‑based superalloys. The included G57 chipbreaker supports controlled chip formation under varying cutting conditions, which helps to avoid built‑up edge on tougher steels and improves surface finish on stainless grades. This material flexibility reduces the need for frequent tool changes and simplifies tooling inventories in mixed‑material shops. Geometry that supports productivity and surface quality The triangular 60° shape with a 0.4 mm corner radius provides a good balance between edge strength and accessibility in tight toolpaths. The negative rake 0° setting enhances edge robustness under interrupted cuts, while the compact insert size (11 mm) and T3 thickness suit light to medium milling operations where rigidity and compact toolholders are required. These geometric choices reduce the risk of chipping during heavy engagement and help maintain a stable cutting edge for longer runs. Practical handling and application notes for process integration As an indexable insert, the part simplifies inventory management and reduces tooling costs per cutting edge when compared with brazed solutions. The coated WSP45G grade is tailored for milling routines that demand both thermal stability and consistent chip control; typical applications include shoulder milling, face milling and light slotting of Stahl and rostfreier Stahl. For best results, match the insert to a holder designed for triangular 60° inserts and monitor edge condition to plan economical index and regrind cycles. For machining tasks that require a robust PVD‑coated solution, contact Metav Werkzeuge for application support and tailored recommendations — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TNMU11T304R-G57-WSP45G-WALTER Name: TNMU11T304R-G57 WSP45G Product type: Triangular milling insert (indexable) Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 0.4 mm Insert size: 11 mm Thickness: T3 Relief angle: 0° (negative) Shape: Triangle 60° Tolerance class: M Features Coating: Tiger‑tec Gold (PVD) Grade: WSP45G (coated cemented carbide) Chipbreaker: G57 Material suitability: P / M / S — Stahl; rostfreier Stahl; Titan and superalloys Execution: U FAQ What materials is this insert suitable for? The TNMU11T304R-G57 WSP45G insert is designed for use on Stahl, rostfreier Stahl and heat‑resistant alloys (ISO groups P, M and S), offering reliable chip control across these families. How does the geometry affect tool life and surface finish? The triangular 60° form with a 0.4 mm corner radius increases edge strength while allowing access in confined toolpaths; the negative rake improves resistance to chipping, which together prolong usable edge life and support consistent surface quality. Is the grade coated and what benefits does the coating provide? Yes — the insert uses the Tiger‑tec Gold PVD coating on the WSP45G grade; this coating enhances thermal resistance and reduces flank wear, improving process security during continuous milling operations. Which toolholders are compatible with this insert? The insert fits standard toolholders for triangular 60° indexable inserts; pairing with a rigid holder and appropriate clamping ensures repeatable positioning and stable cutting conditions for the TNMU11T304R-G57‑type insert. Manufacturer/Responsible: Walter Tools (Walter AG), part of the Sandvik group; AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation; there is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product of the respective manufacturer.
TNMU11T308R-G27 WKK25G Wendeplatten - Walter Tools
Optimise cast-iron machining with a coated Tiger‑tec Gold grade and robust triangle geometry: reliable chip control, long tool life and consistent surface quality. Order the TNMU11T308R-G27 WKK25G milling indexable insert directly via Metav Werkzeuge or consult our specialists for process advice. TNMU11T308R-G27 WKK25G — Milling indexable insert, Tiger‑tec Gold coating, for cast iron by Walter Tools The TNMU11T308R-G27 WKK25G is a triangle 60° milling insert designed for productive cast‑iron machining; its coated carbide grade and dedicated chipformer ensure stable cutting and predictable tool life. Tiger‑tec Gold coating for extended life Optimised for cast iron machining (K) Triangle 60° insert with 0.8 mm radius Negative 0° rake for robust cutting Consistent productivity through targeted grade and coating The insert’s WKK25G grade, part of the Tiger‑tec Gold family, combines a wear‑resistant coating with a substrate engineered for abrasive cast materials. This results in stable wear behaviour and fewer unexpected tool changes, improving usable spindle time. The coating reduces adhesion and thermal impact during interrupted cuts common in cast‑iron operations, while the grade’s toughness maintains edge integrity under shock loads. For production-oriented environments this translates into measurable cycle‑time savings and more predictable tool‑life calculations. Geometry that supports process reliability and surface finish A triangle 60° form and a 0.8 mm corner radius provide a compromise between strength and accessible cutting edge for a variety of slotting and peripheral milling tasks. The negative 0° rake increases cutting edge robustness, reducing chipping in heavy engagement or unstable setups. The integrated G27 chipbreaker shapes short, controllable chips typical for cast iron, lowering the risk of re-cutting and improving surface quality. These geometric choices simplify parameter selection and reduce fixture sensitivity in mixed‑batch workplaces. Practical benefits for workshop application and tool management The insert’s specifications support easy integration into existing toolholders and standard clamping systems, enabling quick index changes and minimal downtime. The grade’s focus on cast‑iron abrasiveness minimises flank wear and affords consistent dimensional stability over multiple passes. Process planners benefit from straightforward feed and speed tuning: higher feeds at conservative depths take advantage of the insert’s stability, while the coating maintains edge condition under thermal spikes. For advice on parameter setup or compatibility with specific holders, professional consultation is available to ensure optimal results. For detailed application advice on Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 — to discuss the TNMU11T308R-G27 WKK25G for specific cast‑iron machining tasks Technical Data SKU: TNMU11T308R-G27-WKK25G-WALTER Product name: TNMU11T308R-G27 WKK25G Manufacturer: Walter Tools Product type: Milling indexable insert Facts Insert size: 11 Thickness: T3 Corner radius: 0.8 mm Geometry: Triangle 60° Rake angle: 0° (negative) Chipformer: G27 Tolerance class: M Special features Grade: WKK25G Series: Tiger‑tec Gold Coating: coated carbide Material application: cast iron (K) Execution: U FAQ What materials is this insert suitable for? The TNMU11T308R-G27 WKK25G insert from Walter Tools is specifically optimised for cast iron (K) and is designed to handle the abrasive, short‑chipping behaviour typical of those materials. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold coating on this coated carbide grade reduces adhesion and thermal wear, which extends edge life and supports consistent surface quality in cast‑iron machining. What advantages does the triangle 60° form provide? A triangle 60° shape with a 0.8 mm corner radius offers a strong cutting edge for heavy engagements while still allowing flexible use for slotting and peripheral milling operations. Is the insert suitable for interrupted cuts and roughing? Yes; the negative 0° rake and the robust WKK25G grade provide edge stability that resists chipping during interrupted cuts and roughing operations. Which chipbreaker is integrated and what is its effect? The integrated G27 chipbreaker produces short, controlled chips in cast‑iron applications, improving chip evacuation and reducing the risk of re‑cutting and surface defects. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer Walter Tools.
TNMU11T308R-G27 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WKP35G grade delivers robust wear resistance and predictable edge life for productive milling of steel and cast iron; the triangular 60° geometry with a 0.8 mm corner radius ensures stable cutting and repeatable seating. Order this insert directly via Metav Werkzeuge or consult our advisers for application-specific guidance. TNMU11T308R-G27 WKP35G Triangular 60° milling indexable insert, Tiger·tec Gold (Walter Tools) The TNMU11T308R-G27 WKP35G is a triangular 60° milling insert with Tiger·tec Gold coating, engineered for efficient and reliable machining of steel and cast iron. Tiger·tec Gold coating for high wear resistance Optimised for steel and cast iron machining Triangle 60° form with 0.8 mm corner radius Negative 0° rake for stable cutting High productivity for steel and cast iron The TNMU11T308R-G27 WKP35G insert combines the Tiger·tec Gold coating and the WKP35G cutting grade to extend tool life under typical steel and cast iron cutting conditions. The coating reduces abrasive wear while the grade provides reliable fracture resistance, which together allow for higher cutting parameters and fewer tool changes. P and K designations refer to the ISO material groups: P for various steels and K for cast iron, so the insert is optimised for both material families. The result is a measurable improvement in process efficiency and a lower cost per component when machining moderate to demanding workpieces. Predictable chip control and stable cutting performance Built around the G27 chipbreaker and a negative 0° rake, the insert is designed for controlled chip formation and steady cutting forces in interrupted and continuous milling operations. The 0.8 mm corner radius increases edge strength for roughing applications while the triangular 60° form permits three indexed cutting edges per insert, improving tool utilisation. These technical choices minimise vibration and reduce the frequency of unplanned stops, supporting continuous production and a predictable maintenance schedule for tool management. Easy integration and consistent positioning in production With the standard triangular geometry and a T3 plate thickness, the insert integrates readily into common toolholders and milling systems, simplifying logistics and reducing setup time. The tolerance class M ensures repeatable seating and alignment, which contributes to consistent workpiece quality across batches. Walter Tools’ engineering focus on stable cutting behaviour and surface finish supports reproducible results, making this insert suitable for workshops and production lines seeking robust, repeatable milling performance. For application advice or stock enquiries regarding Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for expert support and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TNMU11T308R-G27-WKP35G-WALTER Article name: TNMU11T308R-G27 WKP35G Product type: Milling indexable insert Series: Tiger·tec Gold Grade: WKP35G Facts Geometry: Triangle 60° Corner radius: 0.8 mm Clearance/rake: 0° (negative) Plate size: 11 Thickness: T3 Tolerance class: M Special features Chipbreaker: G27 Coating/technology: Tiger·tec Gold Material application: Steel (P) Material application: Cast iron (K) Execution/version: U FAQ What materials is this insert suitable for? The TNMU11T308R-G27 WKP35G insert (Walter Tools milling indexable insert) is optimised for steel (P) and cast iron (K) machining according to the specified grade and coating. What is the benefit of the Tiger·tec Gold coating? Tiger·tec Gold on the TNMU11T308R-G27 WKP35G increases abrasion resistance and edge stability, enabling higher productivity and longer tool life compared with uncoated grades. How does the G27 chipbreaker affect performance? The G27 chipbreaker promotes controlled chip formation and steady evacuation, improving surface finish and reducing the risk of tool overload during milling of steels and irons. Is the triangular form compatible with standard toolholders? Yes, the triangle 60° geometry and T3 thickness of this Walter Tools insert are compatible with common triangular insert holders, facilitating straightforward tool changes and indexing. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the stated manufacturer.
TNMU11T308R-G27 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and consistent cutting performance for efficient steel machining. Order the insert via Metav Werkzeuge or consult our specialists for process optimisation and grade selection. TNMU11T308R-G27 WPP35G indexable milling insert, triangular 60°, for steel – Walter Tools A TNMU11T308R-G27 WPP35G indexable milling insert engineered to deliver consistent productivity in a wide range of steel machining tasks. Tiger·tec Gold coating technology For steel machining (ISO P) Triangular 60° geometry with 0.8 mm radius Negative 0° rake with chipbreaker G27 Consistent tool life through advanced coating and grade The combination of the WPP35G cutting grade and Tiger·tec Gold coating provides a favourable balance between wear resistance and toughness for steel applications. Designed as a coated carbide grade, it copes well with the typical heat and chip formation encountered when machining unalloyed and alloyed steel (ISO P), extending the interval between tool changes and contributing to predictable production cycles. This engineered coating reduces flank wear and helps maintain cutting-edge integrity over longer runs, which translates to lower downtime and more stable output. Geometry and chip control that improve surface quality The triangular 60° insert geometry with a 0.8 mm corner radius and negative 0° rake delivers a robust cutting edge that resists chipping under interrupted cuts or heavy engagement. The chipbreaker G27 is optimised to break and evacuate chips reliably in steel machining, reducing re-cutting and minimising heat concentration at the cutting zone. Together, these features support better surface finish and process stability, making the insert suitable for medium to finishing passes where a balance of strength and precision is required. Easy integration for repeatable production results Tolerance class M and the standard plate thickness T3 allow seamless integration into common toolholders and cutter bodies, enabling quick index changes and straightforward inventory management. The plate size 11 and execution U correspond to widespread holder systems, so retrofitting into existing setups is typically straightforward. This compatibility reduces set-up time and helps achieve reproducible part quality across shifts and operators, supporting leaner workflows and predictable throughput. Flexible grade performance for varied steel operations The WPP35G grade is formulated for a range of steel-cutting conditions: it offers a wear-resistant characteristic for demanding cuts while retaining the toughness necessary for less favourable chip forms. That flexibility makes the insert a practical choice for mixed production environments where both productivity and surface integrity are priorities. As part of Walter Tools’ engineering focus on process security and consistent edge behaviour, this insert contributes to reliable machining results across short runs and series production alike. Discuss process optimisation with Metav Werkzeuge to specify the ideal Walter Tools Tiger·tec Gold insert for steel machining; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and stock information Technical data SKU: TNMU11T308R-G27-WPP35G-WALTER Article designation: TNMU11T308R-G27 WPP35G Manufacturer: Walter Tools Product type: Indexable milling insert (milling insert) Core technical data Geometry: Triangular 60° Corner radius: 0.8 mm Plate size: 11 Plate thickness: T3 Free angle: 0° (negative) Tolerance class: M Special features Series / coating: Tiger·tec Gold Cutting grade: WPP35G (coated carbide) Chipbreaker: G27 Execution: U Material application: Steel (ISO P) ISO designation: TNMU11T308R-G27 WPP35G Suitable for general-purpose and finishing steel machining FAQ What steels is this insert suitable for? The TNMU11T308R-G27 WPP35G insert is designed for steel machining and performs well on unalloyed and alloyed steels classified under ISO P. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, which helps to extend tool life and maintain cutting-edge performance during steel cutting. What machining tasks are best for the triangular 60° geometry? The triangular 60° geometry of this indexable insert offers a robust edge for medium to finishing passes, providing strength for interrupted cuts and a good balance between productivity and surface quality. Is the chipbreaker suitable for long continuous cuts? The G27 chipbreaker is optimised for consistent chip control in steel; it supports reliable evacuation and reduces the risk of re-cutting during longer continuous cuts. Can this insert be used in existing toolholders? With standard dimensions such as plate size 11 and plate thickness T3, the insert is compatible with common milling cutter systems, enabling straightforward integration into existing setups. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
TNMU11T308R-G27 WSP45G Wendeplatten - Walter Tools
Benefit from the durable Tiger·tec Gold coating, the versatile WSP45G grade and the secure chip control provided by the 0.8 mm corner radius for consistent milling performance; order directly via Metav Werkzeuge or request application support from their consultants. TNMU11T308R-G27 WSP45G milling indexable insert – Tiger·tec Gold, triangle 60° by Walter Tools A robust triangular 60° milling insert designed for versatile milling of Stahl, rostfreier Stahl and high-temperature alloys, featuring the WSP45G PVD-coated grade for stable cutting-edge performance. Tiger·tec Gold coating for extended tool life Suitable for Stahl, rostfreier Stahl and superalloys 0° negative rake for secure cutting edge stability Triangle 60° with 0.8 mm corner radius Consistent metal cutting through controlled chip formation The combination of the Tiger·tec Gold coating and the WSP45G grade yields a coating/substrate system optimised for toughness and wear resistance. This results in improved chip control and a longer effective tool life when machining typical construction and alloyed materials. The insert’s geometry concentrates cutting forces at a predictable location on the edge, reducing the risk of unexpected edge failure. For production environments, this translates directly into fewer tool changes and higher machine uptime. Broad material compatibility with reliable edge stability Engineered for P-, M- and S-type applications, the insert supports machining of Stahl, rostfreier Stahl and heat-resistant superalloys including titanium. The WSP45G grade is tuned to handle the thermal and mechanical stresses common with these material groups, promoting stable cutting-edge behaviour under varying cutting conditions. Clear specification of the material groups helps process planners select appropriate parameters and anticipate tool life for cost-effective production. Geometry and grade designed for productive milling operations The triangular 60° form with a 0.8 mm corner radius and 0° negative rake provides a balance between strength and accessibility in face and shoulder milling operations. The G27 chipbreaker assists in producing short, controllable chips across a variety of feeds and depths, reducing the likelihood of entanglement and improving surface finish. The compact insert size and T3 thickness are suited to modular cutter bodies where repeatable seating and orientation are essential for consistent results. For tailored cutting data, availability and prompt delivery of Walter Tools TNMU11T308R-G27 WSP45G inserts, contact Metav Werkzeuge GmbH by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert application advice and support Technical data Article number: TNMU11T308R-G27-WSP45G-WALTER Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Numeric specifications Corner radius: 0.8 mm Insert size: 11 Thickness: T3 Insert shape: Triangle 60° Rake angle: 0° (negative) Tolerance class: M Features / Applications Coating technology: Tiger·tec Gold Coated carbide grade WSP45G Chipbreaker: G27 Applicable to Stahl, rostfreier Stahl, superalloys and titanium Triangle 60° insert form Suited for face and shoulder milling FAQ What materials can this insert machine effectively? The TNMU11T308R-G27 WSP45G insert is designed for machining Stahl, rostfreier Stahl and heat-resistant superalloys (including titanium), with the WSP45G grade optimised for these groups. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating on this Walter Tools grade enhances wear resistance and thermal stability, extending the service life of the insert under typical milling conditions. What does the 0° negative rake mean for cutting performance? A 0° negative rake provides a robust cutting edge that resists chipping under heavy loads, contributing to stable performance during interrupted or heavy milling cuts. Which chipbreaker is integrated and what is its benefit? This insert uses the G27 chipbreaker to produce short, controllable chips across a range of feeds, improving safety and surface finish while reducing chip-related issues. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Brand names and trademarks are the property of their respective owners. They are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, brand-new product of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com