VBGW160404TS-2 WBH10 Wendeplatten - Walter Tools
Take advantage of CBN wear resistance and a stable rhombic 35° geometry to extend tool life and maintain process reliability when machining hardened steels; order the insert directly via Metav Werkzeuge or contact the consultants for cutting data and availability. VBGW160404TS-2 WBH10 – Indexable turning insert for hard turning (Walter Tools) The VBGW160404TS-2 WBH10 is an indexable turning insert engineered for hard turning applications, optimised for the machining of hardened steels and other highly abrasive materials. CBN grade WBH10 for extreme wear resistance Rhombic 35° geometry for stable turning 5° clearance angle with 0.4 mm corner radius Insert size 16 mm, series Walter CBN Maximise uptime with CBN wear resistance and predictable tool life The use of CBN cutting material in the WBH10 grade provides exceptionally high resistance to abrasive wear, which translates directly into longer tool life and fewer interruptions for changeovers. For shops processing hardened components, this cutting grade reduces flank wear under high contact stresses and maintains dimensional stability over extended runs. The result is a measurable improvement in process economy: fewer insert changes, reduced downtime and more predictable production cycles when machining hardened steels and other high-hardness materials. Geometry designed for stability and surface quality The rhombic 35° shape combined with a 5° clearance and a 0.4 mm corner radius balances edge strength and cutting performance. The geometry reduces cutting forces in radial engagement, improving stability on slender workpieces and when turning with interrupted cuts. The modest corner radius supports a robust cutting edge that also helps to produce consistent surface finishes, while the clearance angle minimises rubbing and heat generation at the flank. Together these features enable efficient finishing and semi-finishing passes with high repeatability. Application-focused design for reliable process integration Specified as part of the Walter CBN series, this insert is tailored to hard machining tasks such as finishing and semi-finishing of quenched and tempered components. The insert’s chipbreaker designation and the geometry support controlled chip formation even under the heavy loads associated with hardened materials. As an indexable solution, the component offers simple seat location and fast replacement, contributing to reduced cycle times in production environments. For process planning, the insert’s combination of WBH10 grade and robust shape supports stable tool life, consistent workpiece quality and predictable maintenance intervals. Contact Metav Werkzeuge for tailored machining data, stock information and application advice on Walter Tools CBN inserts and the VBGW160404TS-2 WBH10. Technical data Article number: VBGW160404TS-2-WBH10-WALTER Type: Drehwendeschneidplatte Series: Walter CBN / Hartstoff Grade: WBH10 Manufacturer: Walter Tools Core data Clearance angle: 5° Corner radius: 0.4 mm Insert size: 16 Thickness code: 04 Chipbreaker: 2 Special features CBN cutting material, suited for hard machining Rhombic 35° insert shape Tolerance class G Execution: W Suitable for machining hardened steels and pre-hardened steel Series optimised for high wear resistance FAQ What materials is this insert designed to machine? The VBGW160404TS-2 WBH10 from Walter Tools is designed primarily for hardened steels and other hard, abrasive materials where a CBN grade is advantageous. How does the WBH10 grade affect tool life? The WBH10 CBN grade offers high wear resistance, which extends tool life and reduces the frequency of insert changes during hard turning operations. Which geometry benefits are offered by the rhombic 35° shape? The rhombic 35° geometry improves cutting stability, reduces radial cutting forces and supports consistent surface finish when used with the VBGW160404TS-2 insert. Is the insert suitable for interrupted cuts? Yes, the combination of CBN grade and the robust edge design of this indexable insert provides resistance to chipping and is suitable for interrupted cutting common in hard machining. How is chip control handled with this insert? The specified chipbreaker and the insert’s geometry promote controlled chip formation under the heavy loads typical for hardened material machining with the Walter Tools insert. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are referenced solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
VBGW160408TM-2 WBH10 Wendeplatten - Walter Tools
Taking advantage of the CBN cutting grade and the compact rhombic 35° geometry provides excellent wear resistance and consistent edge stability in hard turning; combined with the defined 0.8 mm corner radius and a 5° clearance angle, this insert supports reliable, productive machining of hardened steels. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. VBGW160408TM-2 WBH10 – Indexable turning insert, CBN grade for hardened steels (Walter Tools) A VBGW160408TM-2 WBH10 indexable turning insert designed for wear-intensive, hard turning applications in hardened and pre-hardened steels. CBN grade WBH10 for hard materials Rhombic 35° insert geometry 5° clearance angle for stable cutting 0.8 mm corner radius for robust edges High wear resistance for hard turning tasks The use of CBN in the grade WBH10 ensures exceptional resistance to abrasive wear and thermal loading when machining hardened steels. As a result, the insert maintains its cutting edge under high contact pressures and elevated temperatures that characterise hard machining. This behaviour reduces the need for frequent index changes and supports longer uninterrupted production cycles, which contributes to lower overall tooling costs and improved throughput for hardened-steel components. Geometry engineered for process stability and surface consistency The 35° rhombic geometry combined with a 5° clearance angle and a 0.8 mm corner radius delivers a balance between accessibility and edge strength. The rhombic form enables versatile turning orientations and effective chip flow, while the modest corner radius strengthens the cutting edge to withstand intermittent cuts and shock loads. Together these features produce a stable cutting action and a consistent surface quality on challenging materials without sacrificing edge life. Designed series and application guidance for reliable output Part of the Walter CBN / Hartstoff series, this insert is specified for hard and pre-hardened steels in accordance with ISO 513 group H. The combination of chipbreaker designation 2, tolerance class G and the robust CBN grade supports predictable performance in serial production. For process setup, employ machining strategies that control heat input and favour steady feed rates to exploit the insert’s wear resistance; this approach enhances process reliability and repeatable component quality across batches. Consult Metav Werkzeuge for application-tailored recommendations on Walter Tools CBN inserts and to confirm the right VBGW160408TM-2 WBH10 solution for hardened-steel turning Technical data Article number: VBGW160408TM-2-WBH10-WALTER ISO designation: VBGW160408TM-2 WBH10 Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 5° Geometry: Rhombus 35° Chipbreaker: 2 Tolerance class: G Special features CBN cutting grade WBH10 Series: Walter CBN / Hartstoff Suitable for: hardened steels (ISO group H) Suitable for: steel and pre-hardened steel applications Execution: W FAQ What is the primary application for this insert? The VBGW160408TM-2 WBH10 insert is intended for hard turning and wear-intensive machining jobs, especially on hardened steels and pre-hardened components. Which materials can be machined with this insert? This CBN insert is suited to hardened steels (ISO group H) and is specified for applications involving steel and pre-hardened steel. What advantages does the WBH10 CBN grade offer? WBH10 delivers superior abrasion resistance and thermal stability, extending service life and ensuring consistent cutting-edge behaviour in hard machining. How does the 35° rhombic geometry affect machining? The rhombic 35° shape provides flexible cutting orientations and improved chip flow, while the 0.8 mm corner radius adds edge robustness for interrupted or heavy cuts. What does tolerance class G mean for users? Tolerance class G indicates a defined dimensional accuracy and repeatability suitable for standard industrial turning operations requiring predictable insert fit and performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Trade names and brand names are used for explanatory purposes only; no affiliation between our company and the mentioned brands is implied. The offered item is an original, brand-new product from the manufacturer.
VBGW160408TM-2 WBH20 Wendeplatten - Walter Tools
High-performance CBN indexable insert with WBH20 grade and a Rhombic 35° form delivers durable edge life and consistent chip control for hard turning tasks; combined with a 5° clearance angle and 0.8 mm corner radius it supports reliable, repeatable machining of hardened steels. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. VBGW160408TM-2 WBH20 Turning insert, CBN grade, Rhombus 35° — Walter Tools The VBGW160408TM-2 WBH20 is a rhombic 35° CBN turning insert designed for hard turning applications and engineered to handle high abrasive loads in hardened steels CBN grade WBH20 for hard materials Rhombic 35° plate form for stable cutting 5° clearance angle for reduced cutting forces 0.8 mm corner radius for edge robustness Consistent performance for hard turning operations The insert is built around the CBN cutting material of the WBH20 grade, which is tailored to the demands of hardened steels. This composition provides high wear resistance and thermal stability, so repetitive passes maintain cutting geometry longer and machining results remain consistent. Using a CBN insert reduces downtime from frequent insert changes and supports higher cutting speeds where cemented-carbide solutions would wear prematurely, improving overall productivity and ensuring process reliability in serial production. Geometry and chip control that stabilise the cut The rhombic 35° plate form, combined with a 5° clearance angle and a 0.8 mm corner radius, gives a balanced compromise between strength and finishing capability. The specified chipbreaker (type 2) promotes reliable chip control under heavy conditions and helps to avoid re-cutting chips that could damage the workpiece. As an indexable insert, the design allows for quick indexing to a fresh cutting edge, reducing non-productive time and simplifying tool inventory management for hard machining tasks. The stable cutting edge and geometry are particularly effective where tight dimensional repeatability and surface quality are required. Operational advantages and application guidance In practical use, the insert offers longer edge life and predictable wear behaviour, which supports leaner tool-change schedules and fewer interruptions on the shop floor. The combination of CBN material and the chipformer design is beneficial when machining pre-hardened or hardened components, delivering lower variation between batches and fewer rejected parts. For application planning, recommend verifying coolant strategy and holder rigidity to maximise the life advantages of the insert. Technical cutting data and matched toolholders are available to help integrate the insert into existing tool systems while preserving part tolerances and surface integrity. For procurement or tailored application support for Walter Tools VBGW160408TM-2 WBH20, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request cutting data, availability or ordering assistance Technical data SKU: VBGW160408TM-2-WBH20-WALTER ISO designation: VBGW160408TM-2 WBH20 Series: Walter CBN / Hartstoff Grade: WBH20 Tolerance class: G Numbers / Core technical data Plate size: 16 mm Thickness: 4 mm Clearance angle: 5° Corner radius: 0.8 mm Chipbreaker type: 2 Special features CBN cutting material (WBH20) Designed for hardened steels and hard turning Series: Walter CBN / Hartstoff Plate form: Rhombus 35° Execution: W Suitable for steel and pre-hardened steel FAQ Which materials is this insert best suited for? The VBGW160408TM-2 WBH20 insert uses a CBN grade optimised for hardened steels; it is intended for hard turning and, depending on the specific workpiece alloy, can also be appropriate where high abrasive loads occur How does the geometry influence cutting performance? The rhombic 35° plate form, combined with a 5° clearance angle and a 0.8 mm corner radius, provides a strong cutting edge and improved chip flow; the chipbreaker type 2 enhances chip control under heavy cutting conditions Is the insert compatible with standard 35° turning holders? The insert follows the VBGW ISO form factor (rhombic 35°) and is intended for holders that accept that geometry; matching the correct clamping and seat type ensures optimal performance What chip control and surface finish can be expected? With the specified chipbreaker and the wear-resistant WBH20 grade, the insert promotes stable chips and consistent surface finish in hard turning, reducing the need for corrective finishing passes Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGW160408TM-2 WBH20C Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting performance, durable geometry and precise edge control for consistent results in hard turning applications; order via Metav Werkzeuge or consult the specialists for application-specific setup. VBGW160408TM-2 WBH20C indexable turning insert — CBN grade for hard machining, Walter Tools The VBGW160408TM-2 WBH20C is an indexable turning insert engineered for machining hardened steels and other highly abrasive materials, offering a wear-resistant cutting edge in a rhombic 35° geometry. CBN grade for hard turning Optimised for hardened steels H Rhombic 35° chip geometry 0.8 mm corner radius for stability Reliable cutting with coated CBN for hard materials The insert uses the WBH20C CBN grade, developed for demanding hard machining tasks where high abrasion and temperature resistance are required. CBN (cubic boron nitride) provides a much higher hardness than conventional carbides and maintains edge integrity under high contact stresses, which reduces flank wear and extends index life. For manufacturing environments that prioritise predictable tool change intervals and stable component tolerances, this material grade supports repeatable performance across series production runs. Geometry engineered for repeatable surface quality The Rhombic 35° geometry combined with a 0.8 mm corner radius and a 5° relief angle promotes stable cutting forces and consistent chip formation. The modest corner radius balances strength and achievable surface finish, reducing the risk of edge chipping during interrupted cuts. The geometry and chipbreaker configuration ensure controlled swarf evacuation, which helps maintain dimensional accuracy and reduces secondary finishing effort when processing hardened components. Tailored application scope and process benefits Designed primarily for the ISO group H (hardened steels), this insert is suitable for hard turning and finishing of steels that have been through heat treatment. The coated CBN grade performs well when machining high-hardness steels and, depending on process parameters, may also be applied to certain cast materials or superalloys. The result is improved process stability and often fewer rework cycles, which supports productivity gains in small-batch and series manufacturing alike. Practical integration into tool systems and workflows The designation VBGW160408TM-2 identifies a standard clamping form and size that integrates into common turning toolholders, simplifying inventory and changeover. The combination of a wear-resistant cutting material and robust geometry contributes to extended index life and reduced unplanned stoppages. For production planning, the predictable behaviour of the insert under high-wear conditions helps to align maintenance intervals and minimise overall machining cost per component. For process advice on Walter Tools CBN inserts or to discuss application-specific parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will provide tailored recommendations. Technical Data Article number: VBGW160408TM-2-WBH20C-WALTER Designation: VBGW160408TM-2 WBH20C Series: Walter CBN / Hartstoff Facts Plate size: 16 mm Plate thickness: 4.0 mm Relief angle: 5° Corner radius: 0.8 mm Chipbreaker: 2 Tolerance class: G Special features Grade: WBH20C (CBN-coated cutting material) Geometry: Rhombic 35° Series description: Walter CBN / Hartstoff Application group: H (hardened steels) Pre-hardened steel: suitable Execution: W FAQ Which materials is this insert designed for? The VBGW160408TM-2 WBH20C from Walter Tools is designed primarily for hardened steels (ISO group H) and is intended for hard machining tasks; depending on process conditions, it can also be applied to certain cast materials or superalloys. What does the WBH20C grade indicate? WBH20C is Walter Tools’ CBN cutting-material grade formulated for high wear resistance and thermal stability, optimised for machining hard, abrasive steels. How does the 0.8 mm corner radius affect performance? A corner radius of 0.8 mm provides a robust cutting edge that reduces chipping risk and supports stable surface finish during finishing and semi-finishing operations on hardened components. What are the key geometric identifiers of the insert? The insert features a Rhombic 35° shape, size 16, a 5° relief angle and chipbreaker type 2, which together influence cutting direction, chip control and holder compatibility. Is this insert suitable for finishing operations? Yes — the CBN grade and controlled geometry make it well suited for finishing and precision hard turning, where consistent dimensional accuracy and surface quality are required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for explanation and comparative purposes. There is no affiliation between Metav Werkzeuge and the trademark owners; the offered item is an original, factory-new product of the stated manufacturer.
VBGW160408TM-2 WBH30 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent edge stability and a geometry optimised for hard turning to increase uptime and process reliability; order via Metav Werkzeuge or consult the team for application advice. VBGW160408TM-2 WBH30 turning insert – CBN grade for hard turning (Walter Tools) VBGW160408TM-2 WBH30 is a turning indexable insert designed for high‑wear applications in hard turning and the machining of hardened steels High‑wear CBN grade WBH30 for hard turning Rhombus 35° insert form for versatile clearance 5° relief angle for controlled cutting engagement Consistent tool life through CBN hardness and grade benefits The WBH30 grade is a CBN cutting material engineered for the demands of hardened steels. Its composition provides markedly improved wear resistance compared with conventional carbide grades, which means fewer insert changes and steadier component tolerances in long production runs. For operations where abrasion and elevated contact temperatures shorten tool life, the CBN composition delivers measurable gains in uptime and process repeatability. Stable cutting geometry for predictable surface quality The insert’s Rhombus 35° form together with a 5° relief angle and 0.8 mm corner radius yields a reliable contact geometry that reduces edge chipping and vibration. This geometry supports stable chip formation and consistent surface finish when facing or profiling hardened components. The controlled cutting engagement helps maintain dimensional accuracy over batch production, reducing downstream rework and inspection effort. Designed for hard and pre‑hardened workpieces — what CBN provides CBN inserts, as presented in this grade, excel where traditional inserts wear rapidly: grinding replacement, interrupted cuts or dry machining of hard grades. The WBH30 grade offers process security and predictable tool life when machining steels that have been heat treated. Because CBN works differently to carbide, thermal and mechanical stresses are managed at the cutting edge, which helps preserve the cutting geometry and lowers the risk of catastrophic flank wear. Integration with tooling systems and operational advantages The insert designation indicates a compact format (size 16, thickness 04) and a tolerance class G for interchangeability in standard insert holders. The combination of a robust grade, precise form and chipbreaker 2 supports higher productivity through longer tool life and fewer indexings. Where fixture stability and consistent feed strategies are in place, this insert contributes to reduced total machining cost per component and improved batch consistency. For hard‑turning applications that demand repeatable performance, specify the Walter Tools VBGW160408TM-2 WBH30 insert and contact Metav Werkzeuge for tailored selection and rapid delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultancy and ordering options Technical data Article number: VBGW160408TM-2-WBH30-WALTER Designation: VBGW160408TM-2 WBH30 Facts Size: 16 Thickness: 04 Corner radius: 0.8 mm Relief angle: 5° Special features Grade: WBH30 (CBN) Series: Walter CBN / Hartstoff Insert form: Rhombus 35° Chipbreaker: 2 Tolerance class: G Suitable for: hardened steels; pre‑hardened steel; general steel applications FAQ What materials is this insert intended to machine? The insert is optimised for hardened steels and pre‑hardened steel applications; the WBH30 CBN grade is selected specifically for hard machining and wear‑intensive tasks. What does WBH30 mean in practice? WBH30 denotes a Walter Tools CBN grade developed for high process security and long wear life when machining hard materials; it balances edge strength with thermal stability. How does the Rhombus 35° form affect machining? The Rhombus 35° geometry provides flexible approach angles and effective clearance for turning and profiling operations while supporting stable cutting conditions. Is the insert suitable for interrupted cuts or high temperatures? Yes — the CBN composition of the WBH30 grade resists abrasion and maintains edge integrity under thermal stress, making it well suited to interrupted and elevated‑temperature applications. Which designation should be quoted when ordering? Quote the full designation and SKU: VBGW160408TM-2 WBH30 (SKU: VBGW160408TM-2-WBH30-WALTER) and specify the intended holder to ensure correct fitment. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGW160408TS-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN cutting performance, precise geometry and consistent chip control for reliable hard-turning operations. Order original Walter Tools inserts directly via Metav Werkzeuge or request tailored advice from the Metav consultants for process-safe tool selection. VBGW160408TS-2 WBH10 – Indexable turning insert, CBN grade for hard turning, Walter Tools VBGW160408TS-2 WBH10 is an indexable turning insert designed for hard and pre-hardened steels, offering a robust solution for hardened-material machining with a Rhombic 35° geometry. CBN grade WBH10 for hard turning Rhombic 35° geometry 5° clearance angle 0.8 mm corner radius Exceptional wear resistance for hardened steels The CBN-based grade WBH10 delivers significantly improved tool life when machining hardened steels, thanks to the intrinsic abrasion resistance of CBN. The insert’s engineered cutting edge reduces flank wear and maintains cutting performance over extended cycles, which supports longer uninterrupted runs and fewer insert changes. The result is a measurable increase in productivity and a lower cost per component when processing hard materials. Consistent surface finish and reliable chip control The Rhombus 35° shape combined with the engineered chipbreaker promotes stable chip formation and predictable cutting forces. A controlled chipflow reduces the risk of workpiece damage and simplifies downstream handling, while the 0.8 mm corner radius balances edge strength with surface integrity. For shops aiming for repeatable finishes on hard parts, this insert offers improved process security and consistent, high-quality results. Practical integration into turning operations As an indexable turning insert with a compact profile (code size 16, thickness code 04) and a small 5° clearance, the insert fits common turning holders and is suitable for contouring and finishing on hardened components. Selection of the WBH10 grade is particularly advantageous where tool life and dimensional stability are priorities. Integration requires standard indexable insert handling; the insert’s geometry facilitates predictable toolpath planning and reliable seat seating in compatible toolholders. Efficiency and machining economy Using CBN inserts for hard turning reduces the need for grinding or costly finishing passes by enabling effective metal removal and superior dimensional control in one set-up. The combination of high wear resistance and stable edge integrity leads to fewer interruptions for tool changes and less variability in part quality, which pays off across batch production and precision jobbing alike. For an application assessment or to source genuine Walter Tools VBGW160408TS-2 WBH10 inserts with delivery options, contact Metav Werkzeuge for a process-oriented recommendation and supply coordination. Technical Data SKU: VBGW160408TS-2-WBH10-WALTER ISO designation: VBGW160408TS-2 WBH10 Product: Indexable turning insert Series: Walter CBN / Hartstoff Manufacturer: Walter Tools Facts Relief angle: 5° Corner radius: 0.8 mm Geometry: Rhombus 35° Size: 16 Thickness code: 04 Chipbreaker: 2 Special features Grade: WBH10 (CBN cutting material) Suitable for: hardened steels (H) Suitable for: pre-hardened steel Stable chip formation High wear resistance Hardened-material machining FAQ Which materials can be machined with this insert? The VBGW160408TS-2 WBH10 insert is optimised for hardened steels (ISO group H) and is suitable for hard turning and pre-hardened workpieces. What are the key geometrical specifications of the insert? The insert features a Rhombus 35° shape with a 0.8 mm corner radius and a 5° clearance angle, supplied in size 16 with thickness code 04. Is the WBH10 grade suitable for continuous production runs? Yes, the WBH10 CBN grade is designed for high wear resistance and stable edge life, making it well suited to continuous and high-volume hard-turning applications. How does CBN compare with conventional carbide for hardened steels? CBN cutting material maintains cutting performance at higher hardness levels than carbide, offering reduced flank wear and improved consistency when machining hardened materials. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanatory purposes. There is no affiliation between our company and the cited brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
VBMT110302-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective productivity, stable chip control and a robust coated carbide grade for consistently reliable turning of demanding alloys; order directly via Metav Werkzeuge or consult our specialists for process recommendations. VBMT110302-MM4 WSM01 indexable turning insert – Tiger‑tec Silver by Walter Tools, rhombic 35° geometry, MM4 chipbreaker The VBMT110302-MM4 WSM01 is an indexable turning insert designed for secure and productive machining of rostfreie Stähle and heat‑resistant alloys in demanding production environments Tiger‑tec Silver coating for tough materials WSM01 grade for rostfreie Stähle and superalloys MM4 chipbreaker for stable chip control Rhombic 35° form for varied turning tasks Faster, more reliable turning on difficult alloys The Tiger‑tec Silver series combines a coated carbide substrate with a grade engineered for thermally and mechanically demanding workpieces. This insert delivers improved tool life and consistent edge performance when machining rostfreie Stähle and nickel‑based superalloys (material groups M and S). The WSM01 grade reduces the risk of built‑up edge and thermal damage by balancing hardness and toughness; the result is fewer interruptions, less rework and higher net output. The MM4 chipbreaker promotes controlled chip formation even under varying cut conditions, which simplifies chip evacuation and reduces the likelihood of workpiece surface defects. Practical edge geometry that broadens application flexibility A rhombic 35° insert form provides access to both general and profiling operations while maintaining secure clamping and favourable approach angles. The 0.2 mm corner radius supports fine finishing passes and helps maintain dimensional accuracy at low depths of cut; the 5° clearance angle reduces friction on the flank face and lowers cutting temperature. Taken together, these design choices enable stable turning across a range of feed rates and depths, making the insert suitable for shops that require a single tool to address both roughing and finishing stages without frequent tool changes. Process support and measurable benefits for production Choosing an insert from the Tiger‑tec Silver series with WSM01 chemistry frequently yields a measurable uplift in process reliability: improved edge stability reduces scrap rates, and consistent chip shapes minimise secondary handling. For teams seeking predictable cycle times, the combination of grade and MM4 chipbreaker lowers the variance in machining results and eases tool selection decisions. For further technical clarification, Metav Werkzeuge provides application advice and supplementary data to align cutting parameters with specific alloy conditions and machine capabilities. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Silver inserts and to check stock availability or lead times Technical Data Article number: VBMT110302-MM4-WSM01-WALTER Designation: VBMT110302-MM4 WSM01 Brand: Walter Tools Series: Tiger‑tec Silver Facts Clearance angle: 5° Corner radius: 0.2 mm Plate size: 11 Plate thickness: 03 Geometry: Rhombic 35° Special features Grade: WSM01 (coated carbide) Chipbreaker: MM4 Material suitability: S / M (superalloys, rostfreie Stähle) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The VBMT110302-MM4 WSM01 insert is specified for material groups S and M, meaning it is suitable for heat‑resistant superalloys and rostfreie Stähle as indicated by the WSM01 grade. What is the purpose of the MM4 chipbreaker? The MM4 chipbreaker is designed to produce stable, manageable chips during turning; it supports consistent chip evacuation and reduces the risk of chip entanglement in machining of tough alloys. How does the rhombic 35° form benefit turning operations? A rhombic 35° form offers versatile cutting angles for both general turning and profiling, facilitating access to complex geometries while maintaining secure clamping and favourable cutting forces. What does the tolerance class M indicate? Tolerance class M denotes medium tolerance for the insert's dimensions and seating, suitable for standard clamping systems and offering a balance between precision and interchangeability. Is the insert suitable for finishing passes? Yes; the 0.2 mm corner radius and the 5° clearance angle are engineered to support fine finishing passes with good surface quality when using appropriate feeds and speeds. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
VBMT110304-FK6 WKK10S WKK10S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver grade with the optimised FK6 chipbreaker and a rhombic 35° form to achieve stable, productive machining of cast iron; the 0.4 mm corner radius supports reliable edge strength and repeatable results. Order the VBMT110304-FK6 WKK10S directly via Metav Werkzeuge or ask the consultants for application support. VBMT110304-FK6 WKK10S – turning indexable insert, FK6 chipbreaker, Tiger·tec Silver (Walter Tools) The VBMT110304-FK6 WKK10S is a rhombic 35° turning indexable insert engineered for efficient and controlled machining of cast iron components, utilising the Tiger·tec Silver coating technology. Tiger·tec Silver coating for wear resistance Optimised FK6 chipbreaker for cast iron chips Rhombic 35° form with 0.4 mm corner radius Stable edge performance and long tool life Efficient cast iron machining with proven coating technology The combination of a coated cemented carbide grade and the Tiger·tec Silver technology delivers measurable gains in tool life and process stability when working with abrasive cast materials. The insert’s geometry focuses cutting forces and the FK6 chipbreaker promotes consistent, short chips typical of grey and nodular cast iron, reducing interruptions in automated turning cycles. This translates into fewer tool changes and higher mean-time-between-interventions on production lines. Precision chip control that protects processes and components Controlled chip formation is central to uninterrupted production. The FK6 chipbreaker is optimised for the fracture behaviour of cast iron, enabling predictable chip flow and reduced re-cutting of swarf. The rhombic 35° shape assists in achieving stable cutting engagement and reliable seat contact in standard toolholders, while the 0.4 mm corner radius balances edge strength with surface finish requirements, supporting repeatable part tolerances and consistent surface integrity. Robust edge life and repeatable performance The cutting grade WKK10S, developed within the Tiger·tec Silver series, emphasises wear resistance and stable edge retention under the typical intermittent cutting conditions encountered with cast iron. The insert’s construction and coating strategy reduce flank wear and crater formation, which helps maintain dimensional accuracy over longer tool life. For production environments seeking dependable, reproducible results, this insert provides a pragmatic balance between economy and performance. Practical application guidance and compatibility Designed specifically for machining cast iron (designation K), the insert matches common turning operations where short, brittle chips are expected. The relief angle of 5° and the rhombic geometry permit straightforward implementation in conventional turning toolholders. For process optimisation, pairing this grade with appropriate cutting parameters for cast iron—moderate cutting speeds and adequate feed to encourage chip breakage—will exploit the insert’s strengths in chip control and life expectancy. For special applications or mixed-material batches, consult application data to confirm suitability. Contact Metav Werkzeuge for tailored cutting data, availability and precise application recommendations for Walter Tools Tiger·tec Silver inserts; the Metav Werkzeuge team will advise on parameters and stocking options. Technical data Article number: VBMT110304-FK6-WKK10S-WALTER Designation: VBMT110304-FK6 WKK10S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKK10S Applicable material: Cast iron (K) Chipbreaker: FK6 Form: Rhombus 35° Relief angle: 5° Corner radius: 0.4 mm Thickness code: 03 Size: 11 Tolerance class: M Execution: T Facts Insert size: 11 Corner radius: 0.4 mm Relief angle: 5° Thickness code: 03 Tolerance class: M Special features Tiger·tec Silver coating (WKK10S) Coated cemented carbide construction Optimised FK6 chipbreaker for cast iron Rhombic 35° geometry Designed for stable wear behaviour and chip control FAQ What materials is this insert optimised for? The VBMT110304-FK6 WKK10S is optimised for cast iron (material group K) and its chip-forming characteristics. How does the FK6 chipbreaker affect production? The FK6 chipbreaker promotes short, brittle chips typical of cast iron, improving chip evacuation and reducing machine downtime during turning operations. What benefits does the Tiger·tec Silver grade provide? Tiger·tec Silver offers enhanced wear resistance and a robust coating system that prolongs edge life and supports consistent machining performance in abrasive cast materials. Is the geometry suitable for standard toolholders? Yes, the rhombic 35° form and 5° relief angle make the insert compatible with widely used turning toolholders for conventional turning setups. Can this insert be used for finishing operations? The 0.4 mm corner radius balances edge strength and surface quality, making it suitable for many finishing tasks in cast iron where a controlled surface finish is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product from Walter Tools.
VBMT110304-FM6 WSM01 WSM01 Wendeplatten - Walter Tools
Zuverlässige Kombination aus hoher Verschleißfestigkeit, sicherer Spanbildung durch den FM6-Spanbrecher und optimierter Schneidstoffsorte WSM01 für anspruchsvolle Werkstoffe. Profitieren Sie von konstanter Bearbeitungsqualität und längeren Werkzeugstandzeiten – Bestellung und technische Beratung über Metav Werkzeuge möglich. VBMT110304-FM6 WSM01 – Indexable turning insert, Rhombus 35°, Tiger‑tec Silver (Walter Tools) The VBMT110304-FM6 WSM01 is an indexable turning insert designed for productive machining of rostfreier Stahl and heat‑resistant superalloys, combining a robust chipformer with a wear‑resistant coating for secure edge life. Tiger‑tec Silver coating for enhanced wear resistance WSM01 grade optimised for rostfreier Stahl and superalloys Rhombic 35° form with 0.4 mm corner radius 5° clearance with FM6 chipbreaker for secure chip control Consistent edge life and productivity for demanding materials The Tiger‑tec Silver series provides a hard, wear‑resistant coating that reduces flank and crater wear, supporting longer tool life in continuous production. The WSM01 carbide grade is formulated specifically for tough, adhesive materials, improving stable chip formation when machining rostfreier Stahl and high‑temperature alloys. As a result, unexpected edge breakdown is less likely, which supports predictable process windows and fewer interruptions in the production flow. This leads to better overall throughput and more reliable component quality. Improved process reliability through targeted geometry and chip control The combination of the FM6 chipbreaker and the rhombic 35° insert form promotes controllable chip morphology and safe evacuation, especially when cutting sticky or heat‑sensitive materials. The 0.4 mm corner radius balances edge strength and finishing capability, while the 5° clearance angle helps to avoid rubbing under moderate depths of cut. These geometry choices mean fewer reworks and a reduced risk of built‑up edge, translating into consistent surface finishes and dimensional stability on machined parts. Practical selection guidance for workshop integration Selection of this turning insert should be based on material group and cutting strategy: the insert is intended for applications classified under tool group S (heat‑resistant superalloys and titanium) and M (rostfreier Stahl) according to ISO 513 conventions. When replacing a worn insert, matching the VBMT110304-FM6 WSM01 geometry and chipbreaker ensures continuity of process parameters and maximises the benefit of the Tiger‑tec Silver coating. For process optimisation, pair the insert with appropriate carbide grades and cutting parameters recommended for adhesive, heat‑prone materials to preserve edge life and part quality. For procurement or technical matching of Walter Tools inserts such as the VBMT110304-FM6 WSM01, contact Metav Werkzeuge for application advice and immediate supply at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: VBMT110304-FM6-WSM01-WALTER Product type: Indexable turning insert ISO designation: VBMT110304-FM6 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FM6 Manufacturer: Walter Tools Facts Shape: Rhombus 35° Clearance angle: 5° Corner radius: 0.4 mm Size: 11 Thickness: 03 Tolerance class: M Special features Material application: S / M Optimised for rostfreier Stahl and heat‑resistant superalloys Coated cemented carbide Designed for stable chip formation and long tool life Suitable for productive turning applications FAQ What materials is this insert suitable for? The VBMT110304-FM6 WSM01 insert is designed for rostfreier Stahl and heat‑resistant superalloys (material groups M and S), offering secure chip control and edge stability. How does the FM6 chipbreaker improve performance? The FM6 chipbreaker on the VBMT110304-FM6 WSM01 promotes controlled chip formation and evacuation, reducing the risk of built‑up edge when machining adhesive materials. Can the VBMT110304-FM6 WSM01 be used for finishing operations? Yes. With its 0.4 mm corner radius and rhombic 35° form, the insert balances edge strength and surface quality for a range of finishing and medium‑cut turning tasks. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on this Walter Tools insert increases wear resistance and thermal stability, extending tool life under demanding cutting conditions. How to maintain process consistency when replacing inserts? Replace worn inserts with the same ISO designation (VBMT110304-FM6 WSM01) and chipbreaker to preserve cutting parameters and ensure repeatable part quality. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no commercial connection between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
VBMT110304-FM6 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the FM6 chipbreaker and a 0.4 mm corner radius for stable edge life and improved chip control; order the VBMT110304-FM6 WSM10S directly via Metav Werkzeuge or consult our advisors if required. VBMT110304-FM6 WSM10S indexable turning insert — Walter Tools, FM6 chipbreaker, Tiger·tec Silver A VBMT110304-FM6 WSM10S indexable turning insert engineered for reliable machining of rostfreier Stahl and heat-resistant superalloys in demanding turning applications. Tiger·tec Silver coated carbide grade WSM10S FM6 chipbreaker for secure chip control Rhombic 35° insert with 0.4 mm corner radius Optimised for rostfreier Stahl and superalloys Consistent edge performance for demanding alloys The coated carbide grade WSM10S, part of the Tiger·tec Silver family, is formulated to resist thermal loading and maintain a stable cutting edge when machining challenging materials. The combination of a wear-resistant coating and an adapted substrate reduces edge deformation and supports continuous material removal, which in turn helps to secure process stability and predictable tool life when working with rostfreier Stahl and nickel- or cobalt-based superalloys. This benefit is particularly relevant for production runs where consistent surface finish and reproducible tolerances are required. Controlled chip flow and reduced risk of built-up edge Integrated into the insert geometry, the FM6 chipbreaker is designed to produce short, manageable chips under the cutting conditions typical for rostfreier Stahl and high-temperature alloys. Controlled chip formation minimises the risk of chip entanglement and reduces secondary machining interruptions. The result is improved productive uptime and easier chip evacuation in both manual and automated turning centres, supporting a smoother production flow and enhanced operator safety. Geometry and angles optimised for finishing and medium turning The rhombic 35° shape and the modest 0.4 mm corner radius deliver a balance between penetration and stability: the acute approach angle supports accurate profile turning and fine finishing, while the modest radius ensures strength at the cutting edge to withstand intermittent cuts. The 5° relief angle reduces rubbing on the flank face and helps to maintain surface integrity on sensitive components. These geometry choices make the insert suitable for diverse turning tasks where dimensional control and surface quality are priorities. Application guidance and integration into machining processes The insert is supplied in the standard VBMT format and matches common clamping systems for indexable turning. When replacing an existing grade for rostfreier Stahl machining, select cutting parameters that favour moderate feed and stable cutting speeds to exploit the thermal and mechanical advantages of the Tiger·tec Silver coating. Where required, Metav Werkzeuge can advise on holder selection, cutting data and trial parameters to achieve optimum productivity and repeatable results. Contact Metav Werkzeuge for tailored application advice on Walter Tools turning inserts and rapid supply coordination via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VBMT110304-FM6-WSM10S-WALTER Designation: VBMT110304-FM6 WSM10S Brand: Walter Tools Series: Tiger·tec Silver Facts Corner radius: 0.4 mm Relief angle: 5° Insert form: Rhombic 35° Size designation: 11 Thickness code: 03 Special features Coating: Tiger·tec Silver Grade: WSM10S Chipbreaker: FM6 Suitable for: rostfreier Stahl (ISO group M) and heat-resistant superalloys (ISO group S) Tolerance class: M Execution: T FAQ What materials is this insert best suited for? The VBMT110304-FM6 WSM10S insert is optimised for machining rostfreier Stahl and heat-resistant superalloys, offering enhanced thermal resistance and edge stability for these material groups. What chip control can be expected from the insert? The FM6 chipbreaker on the VBMT110304-FM6 promotes short, controllable chips that reduce entanglement and support uninterrupted machining cycles. Is the insert coated and why does that matter? Yes — the insert uses the Tiger·tec Silver coating technology (WSM10S), which improves wear resistance and heat handling during extended cutting of difficult alloys. What are the key geometric parameters to note for setup? Key parameters include the rhombic 35° form, a 0.4 mm corner radius and a 5° relief angle; these influence cutting forces, surface finish and edge strength during turning operations. Can Metav Werkzeuge advise on cutting data and holder selection? Metav Werkzeuge can provide application recommendations and holder compatibility guidance for the VBMT110304-FM6 WSM10S to help integrate the insert into production workflows. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT110304-FM6 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust FM6 chipbreaker and a compact rhombic 35° geometry for reliable, high-productivity turning of demanding alloys; order the insert via Metav Werkzeuge or consult their specialists for optimised cutting data and delivery. VBMT110304-FM6 WSM20S – Indexable turning insert by Walter Tools, Tiger·tec Silver, for stainless steels and superalloys VBMT110304-FM6 WSM20S is an indexable turning insert designed for stable performance when machining stainless steels and heat-resistant alloys Tiger·tec Silver coated carbide grade WSM20S Stable chip formation for tough materials Rhombic 35° insert, 0.4 mm corner radius 5° relief angle, FM6 chipbreaker design Reliable machining of stainless steels and superalloys with consistent chip control The combination of the WSM20S grade with the Tiger·tec Silver coating targets applications in stainless steels (ISO group M) and heat-resistant superalloys (ISO group S). The coated carbide substrate is engineered to withstand elevated temperatures and reduce edge wear, which supports a stable chip formation under challenging cutting conditions. For shops working with aggressive materials, this geometry reduces the risk of built-up edge and promotes repeatable surface quality, contributing to fewer reworks and a steadier production flow. Higher process security and extended edge life through optimised geometry A focused geometry — rhombic 35° shape with a 0.4 mm corner radius and 5° relief — delivers a predictable load distribution on the cutting edge. The FM6 chipbreaker is tuned for interrupted and continuous turns, improving evacuation of chips and reducing vibration. This results in measurable gains in tool life and surface finish stability, enabling more economical batch processing and improved overall equipment effectiveness. The insert’s tolerance class M supports consistent seat fit and repeatable indexing in standard toolholders. Practical handling, application scope and productivity benefits The insert is supplied in the compact VBMT format that suits a wide range of turning operations where space and rigidity matter. Its design supports machining strategies for medium to heavy engagement cuts in stainless steels and nickel-based alloys, while the coated cutting edge aids in heat resistance and wear control. For production planning, the clear grade designation and standard geometry simplify tool selection and inventory management, helping to reduce setup time and improve throughput without compromising component integrity. For precision turning in stainless steels and superalloys, contact Metav Werkzeuge for tailored cutting data and stock availability — Metav Werkzeuge’s experts are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VBMT110304-FM6-WSM20S-WALTER Designation: VBMT110304-FM6 Full designation: VBMT110304-FM6 WSM20S Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM6 Form: Rhombus 35° Tolerance class: M Execution: T Size code: 11 Thickness code: 03 Corner radius: 0.4 mm Relief angle: 5° Facts Relief angle: 5° Corner radius: 0.4 mm Insert size: 11 mm Thickness code: 03 Tolerance: M Special features Tiger·tec Silver coating technology WSM20S coated carbide grade FM6 chipbreaker for improved chip control Suitable for stainless steels and superalloys (ISO M / S) Rhombic 35° geometry for versatile turning FAQ Is this insert suitable for machining stainless steels? Yes. The VBMT110304-FM6 WSM20S is specifically designed for stainless steels (ISO group M) and provides stable chip formation and improved edge resistance for these materials. What advantages does the Tiger·tec Silver coating offer? The Tiger·tec Silver coating on the WSM20S grade enhances thermal resistance and wear performance, which supports longer edge life and consistent surface finish in demanding turning operations. Which chipbreaker should be selected for interrupted cuts? The FM6 chipbreaker integrated with this insert is engineered for both interrupted and continuous turning applications, offering reliable chip control and reduced vibration. How does the insert geometry affect part quality? The rhombic 35° form with a 0.4 mm corner radius and 5° relief promotes predictable cutting forces and stable tool engagement, which helps to maintain surface quality and dimensional repeatability. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VBMT110304-FM6 WSM30S FM6 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the FM6 chipbreaker delivers stable cutting and secure chip formation in stainless steels and heat‑resistant superalloys; the Rhombus 35° geometry and a 0.4 mm nose radius support repeatable edge life and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult our application specialists for machining guidance. VBMT110304-FM6 WSM30S — indexable turning insert, Tiger·tec Silver (Walter Tools) A VBMT110304-FM6 WSM30S indexable turning insert engineered for demanding turning tasks in stainless steels and superalloys. Tiger·tec Silver for thermal stability and wear resistance Rhombus 35° geometry for versatile turning applications FM6 chipbreaker for reliable chip control 0.4 mm nose radius for consistent edge strength Optimised for difficult-to-machine materials The insert’s core advantage is the Tiger·tec Silver coated carbide grade WSM30S, developed for machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S). The coating and substrate combination enhances thermal stability and reduces flank wear under high cutting temperatures, which results in longer tool life and fewer interruptions. For production environments where consistent component tolerances and surface finish matter, this turning grade supports predictable performance and lower total machining cost per part. Consistent chip formation and process reliability The FM6 chipbreaker and the insert’s Rhombus 35° form aim to control chip flow and reduce the risk of built-up edge during intermittent or continuous cuts. Controlled chip formation improves coolant access and reduces tool nose damage, translating into steadier cycle times and less rework. The specified 0.4 mm nose radius balances strength and fine finish capability; where a sharper edge would fail prematurely, this radius sustains edge integrity while still permitting acceptable surface finishes on turned components. Practical benefits for shopfloor application Geometry and tolerance class M ensure interchangeability and repeatable setup in toolholders designed for VBMT‑type inserts. The combination of a robust coated grade and a proven chipbreaker supports higher cutting parameters on appropriate machines, increasing throughput without sacrificing part quality. For process planning, consider optimising speeds and feeds for the given material group (M or S) and validating results on representative workpieces; the insert’s characteristics favour both roughing passes with stable edges and finishing passes where surface quality is required. Contact Metav Werkzeuge for tailored application support on this Walter Tools insert or to place your order for the VBMT110304-FM6 WSM30S via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: VBMT110304-FM6-WSM30S-WALTER Article designation: Drehwendeschneidplatte VBMT110304-FM6 WSM30S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Clearance angle: 5° Corner radius: 0.4 mm Insert size designation: 11 Thickness designation: 03 Tolerance class: M Chipbreaker: FM6 Special features Coated carbide grade WSM30S Suitable for stainless steels (ISO group M) Suitable for heat‑resistant superalloys and titanium (ISO group S) Rhombus 35° insert shape Designed for stable chip formation and edge robustness FAQ What materials is this insert suited for? The VBMT110304-FM6 WSM30S is specified for stainless steels (ISO M) and for heat‑resistant superalloys or titanium (ISO S), benefitting from the Tiger·tec Silver coated carbide for thermal and wear resistance. How does the FM6 chipbreaker influence machining? The FM6 chipbreaker on this indexable insert produces controlled chips and improves chip evacuation, which supports longer tool life and steadier cutting conditions in turning operations. Can this insert be used for finishing as well as roughing? Yes; the 0.4 mm nose radius provides a balance between edge strength for roughing and the capability to achieve good surface finishes during finishing passes when combined with appropriate cutting parameters. Which insert geometry and tolerance class are provided? This insert features a Rhombus 35° geometry with a tolerance class M, ensuring repeatable mounting accuracy and reliable performance in standard VBMT toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the brand owners. The offered item is original, factory‑new merchandise from the manufacturer.
VBMT110304-FP6 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WPP10G grade tuned for steel, and the reliable FP6 chipbreaker for a stable, productive turning process. Order directly via Metav Werkzeuge or consult our team for application-specific recommendations. VBMT110304-FP6 WPP10G — indexable turning insert, Tiger·tec Gold coating, for steel (Walter Tools) A robust VBMT110304-FP6 WPP10G indexable insert designed for general steel turning, featuring a Rhombic 35° geometry and a finely balanced chipbreaker for consistent performance Tiger·tec Gold coating for wear resistance WPP10G grade optimised for steel machining Rhombic 35° insert geometry 0.4 mm corner radius for reliable edge strength Consistent chip control delivers predictable cycle times The combination of the FP6 chipbreaker and the WPP10G coating technology provides consistent chip control during a wide range of steel operations. This engineered interaction reduces the risk of irregular chips and tool interruptions, contributing to shorter cycle times and fewer unplanned stoppages. For production environments where repeatable output is required, this insert supports process stability and helps maintain throughput. Geometry and edge preparation extend productive edge life The Rhombic 35° form paired with a 0.4 mm corner radius gives a favourable balance between edge strength and cutting engagement. Combined with a 5° clearance, the geometry supports smooth entry and exit from the cut while maintaining dimensional stability. The specified tolerance class M ensures consistent fit and repeatable clamping, so toolholders and turret indexing remain precise throughout multi-shift production. Coating technology and grade reduce tooling costs Built on the Tiger·tec Gold platform, the coated carbide grade focuses on wear resistance and thermal stability when machining steel. This results in longer intervals between indexings or insert changes, which lowers per-part tooling costs. In high-volume turning operations, the improved life and surface finish contribute directly to the economics of the process without sacrificing cut quality. Easy integration into existing turning setups Available in insert size 11 and thickness code 03, the plate is compatible with standard clamping systems using VBMT-style inserts and follows ISO-based designation. Its familiar format and measured tolerance make replacement straightforward, reducing downtime during changeovers. The compact form factor and stable cutting edge simplify toolpath programming and enable predictable machining results across batches. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools VBMT110304-FP6 WPP10G inserts for immediate delivery; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VBMT110304-FP6-WPP10G-WALTER Label: Drehwendeschneidplatte VBMT110304-FP6 WPP10G Walter Tools Manufacturer: Walter Tools Facts Free angle: 5° Corner radius: 0.4 mm Plate size: 11 Plate thickness: 03 Tolerance class: M Special features Chipbreaker: FP6 Grade: WPP10G Series: Tiger·tec Gold Plate form: Rhombus 35° Material application: Steel (P) FAQ What materials is this insert intended for? The VBMT110304-FP6 WPP10G insert is specified for machining steel (P-class), designed to handle the thermal and chip-formation characteristics typical of that group. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WPP10G grade improves wear resistance and thermal stability, which in practice extends insert life and reduces tooling-change frequency for Walter Tools inserts. What role does the FP6 chipbreaker play in cutting performance? The FP6 chipbreaker promotes controlled chip formation and evacuation, lowering the chance of entanglement and contributing to stable cutting conditions with the VBMT110304-FP6 geometry. Is the corner radius suitable for finishing passes? The 0.4 mm corner radius offers a compromise between edge strength and surface finish, making it suitable for many finishing and semi-finishing operations when used with appropriate feeds and speeds. Can this insert be used in standard VBMT toolholders? Yes, the insert follows the VBMT format and tolerance class M, enabling straightforward replacement in compatible toolholders and turret systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation between our company and the listed manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
VBMT110304-FP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a controlled FP6 chipbreaker to secure consistent chip control and extended tool life in steel machining; the balanced WPP20G grade delivers versatility across a wide range of steel applications. Order directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. VBMT110304-FP6 WPP20G – Rhombus 35° turning insert, Tiger‑tec Gold (Walter Tools) A VBMT110304-FP6 WPP20G turning insert engineered for versatile steel machining, combining a Tiger‑tec Gold coated carbide grade with an FP6 chipbreaker for reliable chip control and consistent surface quality Tiger‑tec Gold coated carbide FP6 chipbreaker for stable chips Rhombus 35° insert form 5° clearance angle WPP20G: balanced wear and toughness High-performance machining with proven carbide technology The Tiger‑tec Gold coating on this insert brings enhanced wear resistance without sacrificing toughness, making it suitable for a broad range of steels (ISO group P). The WPP20G grade is a coated carbide formulation optimised for the typical heat and chip-forming conditions encountered in steel turning, delivering a trustworthy compromise between tool life and cutting reliability. The FP6 chipbreaker contributes to controlled chip formation, which helps to reduce interruptions and maintain steady cycle times in production environments. Geometry engineered for repeatable quality The rhombic 35° shape and 5° clearance provide a dependable cutting geometry for both light finishing and more demanding operations. The 0.4 mm corner radius stabilises the cutting edge and supports a consistent surface finish, while the tolerance class M ensures reproducible fit and positioning in standard toolholders. These geometric features translate into predictable part quality and simplified process setup, especially in batch production where repeatability matters. Process security and economic advantage By combining grade, coating and chipbreaker, the insert reduces the frequency of index changes and contributes to lower total operating costs. The coated carbide composition and Tiger‑tec Gold technology reduce flank and crater wear under the thermal loads typical of steel machining, supporting longer tool life and fewer interruptions. For operations prioritising throughput and constancy, this results in measurable gains in cutting stability and overall machining economy. Practical integration into workshop workflows The insert is supplied in the common VBMT footprint and the standard thickness series, enabling straightforward integration into existing tool assemblies without requiring special clamping systems. The FP6 chipbreaker helps to maintain consistent chip shape across varying depths of cut, easing swarf handling and reducing the risk of chip-related stoppages. For mixed production lines working mainly with steel, the graded versatility of this insert supports both roughing passes and fine finishing when process parameters are adjusted accordingly. For tailored advice on deploying Walter Tools Tiger‑tec Gold inserts in specific steel machining tasks, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert support and application guidance. Technical data Article number: VBMT110304-FP6-WPP20G-WALTER Product: Turning insert Brand: Walter Tools Grade: WPP20G Series: Tiger‑tec Gold Designation: VBMT110304-FP6 Facts Relief angle: 5° Corner radius: 0.4 mm Insert form: Rhombus 35° Plate size: 11 Plate thickness: 03 Tolerance class: M Special features Chipbreaker: FP6 Coating: Tiger‑tec Gold (coated carbide) Suitability: Steel (ISO group P) Execution: T Balanced wear resistance and toughness FAQ What materials is this insert intended for? This turning insert is intended primarily for machining steel; the WPP20G grade and Tiger‑tec Gold coating are optimised for ISO group P materials. How does the FP6 chipbreaker improve machining? The FP6 chipbreaker on the VBMT110304-FP6 WPP20G promotes controlled chip formation, reducing interruptions and improving swarf management in continuous steel turning operations. Can the insert be used for finishing and roughing? Yes, the balanced properties of the WPP20G grade and the 0.4 mm corner radius make the insert suitable for both higher‑material‑removal passes and finishing when parameters are appropriately adjusted. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances wear resistance while retaining edge toughness, resulting in longer tool life and improved process stability when machining steels. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the respective manufacturer.
VBMT110304-MM4 WMP20G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a controlled MM4 chipbreaker and rhombic geometry for reliable machining of stainless steel; order or enquire via Metav Werkzeuge for efficient tool supply and application advice. VBMT110304-MM4 WMP20G – rhombic 35°, 5° clearance for stainless steel (Walter Tools) The VBMT110304-MM4 WMP20G is a turning insert designed for medium to robust machining of stainless steel, offering optimised chip control and extended tool life in production environments. Tiger·tec Gold coating for enhanced wear resistance Optimised for stainless steel (ISO group M) Rhombic 35° geometry with 5° clearance MM4 chipbreaker for reliable chip control Consistent edge life through advanced coating and chip control The combination of Tiger·tec Gold coating and the MM4 chipbreaker provides measurable advantages in durability and process stability. The coating reduces flank and crater wear under elevated temperatures typical for stainless steel, while the chipbreaker promotes predictable chip formation, lowering the risk of built-up edge and unplanned tool changes. These technical measures translate into longer service intervals and fewer interruptions on the shop floor, supporting steady production throughput. Geometry that improves cutting forces and surface quality The rhombic 35° geometry with a 5° clearance reduces cutting forces in finish and semi-finish operations and helps to maintain tool engagement stability. A 0.4 mm corner radius balances edge strength and achievable surface finish, enabling controlled material removal without sacrificing component quality. Operators benefit from easier control of feed and depth, which supports consistent part tolerances and repeatable surface results. Designed for efficient machining of ISO group M materials Specified for ISO group M, the grade is tuned for the specific challenges of stainless steel, such as toughness and heat generation. The grade selection and chipbreaker configuration improve productivity by enabling higher cutting parameters where machine capability permits, while maintaining a stable cutting edge. This rational optimisation reduces overall machining time per part and contributes to a better cost-per-component metric in medium-duty to robust cutting scenarios. Practical compatibility and secure handling in production The insert follows common VBMT coding (size 11, thickness code 03) and is suitable for indexable systems that accept this form factor; this simplifies tooling logistics and spare-part management. As an indexable insert, it offers multiple cutting edges per item and fast replacement on standard toolholders, reducing downtime during changeovers. Backed by Walter Tools’ focus on precision and edge stability, the component supports reproducible performance across batches and shifts. For high-process security when machining stainless steel, request the VBMT110304-MM4 WMP20G from Metav Werkzeuge or contact our experts at info@metav-werkzeuge.com / +49 2822 7131930 to discuss suitable toolholders and cutting data. Technical data SKU: VBMT110304-MM4-WMP20G-WALTER Article designation: VBMT110304-MM4 WMP20G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Free angle: 5° Corner radius: 0.4 mm Size: 11 Thickness code: 03 Tolerance class: M Designs / Special features Grade: WMP20G Chipbreaker: MM4 Geometry: Rhombic 35° Application: stainless steel (ISO group M) Series technology: Tiger·tec Gold Execution: T Material group code: M FAQ Which materials can be machined with this insert? The VBMT110304-MM4 WMP20G is specifically designed for stainless steel and is classified for ISO group M applications, making it suitable for a wide range of stainless workpieces. What advantages does the MM4 chipbreaker offer? The MM4 chipbreaker promotes steady chip formation and evacuation when machining stainless steel, which improves surface finish and reduces the risk of built-up edge under typical operating conditions. How does the Tiger·tec Gold technology affect tool life? Tiger·tec Gold provides enhanced wear resistance and heat protection; with the VBMT110304-MM4 WMP20G this leads to longer edge life and more consistent performance in medium to robust machining. Is the insert compatible with standard VBMT toolholders? Yes, the insert follows standard VBMT coding (size 11, thickness code 03) and fits toolholders designed for that insert form, enabling straightforward replacement and inventory management. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is original, factory-new goods of the manufacturer. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is a globally recognised manufacturer of precision metalworking tools.
VBMT110304-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
Combining Walter Tools' Tiger‑tec Silver technology with a dedicated MM4 chipbreaker and a compact 0.4 mm nose radius results in reliable chip control and extended edge life when machining rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. VBMT110304-MM4 WMP20S indexable turning insert — Tiger‑tec Silver, 0.4 mm nose radius — Walter Tools The VBMT110304‑MM4 WMP20S is an indexable turning insert engineered for medium to robust machining of rostfreier Stahl, combining a rhombic 35° geometry with a Tiger‑tec Silver coated carbide grade for consistent performance Tiger‑tec Silver coated carbide Optimised for rostfreier Stahl Rhombic 35° geometry 0.4 mm corner radius, 5° relief Improved process stability through advanced coating and chip control The coated carbide grade from the Tiger‑tec Silver series provides enhanced edge stability and predictable wear behaviour under the demanding thermal and mechanical loads typical of rostfreier Stahl machining. The integrated MM4 chipbreaker promotes secure chip formation, reducing the risk of built-up edge and improving cycle reliability. For workshops seeking lower rework rates and fewer tool changes, this translates into measurable productivity gains and steadier component quality. Geometry tailored for accessibility and surface quality The rhombic 35° geometry combined with a 0.4 mm nose radius and a 5° relief angle enables precise contact conditions at the cutting edge. This geometry supports fine finishing passes while remaining robust enough for slightly heavier cuts, helping to reduce vibration and to improve surface integrity. The subtle nose radius balances form accuracy and tool strength, so finishing quality is improved without sacrificing reliable tool life. Application guidance for consistent shop-floor performance Designed for machining rostfreier Stahl under medium to robust conditions, the insert is suitable where secure chip evacuation and stable cutting edges are priorities. The coated grade is intended to handle the tendency of these alloys to produce stringy chips and to generate heat at the cutting zone; the outcome is fewer interruptions and more predictable tool change intervals. For integration into existing turning toolholders, the indexable format simplifies replacement and reduces machine downtime. Talk to Metav Werkzeuge for tailored cutting data and to secure the VBMT110304‑MM4 WMP20S insert from Walter Tools for rostfreier Stahl applications Technical data SKU: VBMT110304-MM4-WMP20S-WALTER Article designation: VBMT110304‑MM4 Full designation: VBMT110304‑MM4 WMP20S Manufacturer: Walter Tools Product type: Indexable turning insert Facts Relief angle: 5° Corner radius: 0.4 mm Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Chipbreaker: MM4 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WMP20S (coated carbide) Material group: M (rostfreier Stahl) Suitable for medium to robust machining conditions FAQ Which materials is this insert designed for? The VBMT110304‑MM4 WMP20S insert from Walter Tools is designed primarily for rostfreier Stahl and is optimised to handle the toughness and thermal sensitivity of these alloys. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on this Walter Tools indexable insert improves wear resistance and edge stability, helping to maintain cutting performance and reduce unscheduled tool changes during rostfreier Stahl machining. When should the MM4 chipbreaker be chosen over other chipbreakers? The MM4 chipbreaker on the VBMT110304‑MM4 WMP20S is suited to conditions where controlled chip segmentation is required for rostfreier Stahl; it offers a balance between chip evacuation and surface finish for medium to robust cutting parameters. How does the rhombic 35° shape influence accessibility and finish? A rhombic 35° insert form provides versatile approach angles, allowing better access in tight geometries while supporting good surface quality—this is beneficial when using the VBMT110304‑MM4 WMP20S in complex turning operations. Is the insert compatible with standard turning toolholders? Yes, the indexable format of the VBMT110304‑MM4 WMP20S is compatible with common clamping systems for turning inserts; correct seating and torque are essential to preserve the expected performance and tool life. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are referenced for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer (Walter Tools).
VBMT110304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver grade and the MM4 chipbreaker for reliable chip control and extended edge life in hard-to-machine materials; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VBMT110304-MM4 WSM01 – Rhombic 35° turning insert, Tiger‑tec Silver (Walter Tools) A VBMT110304-MM4 WSM01 indexable turning insert designed for demanding turning of stainless steels and heat‑resistant alloys, offering stable cutting edges and predictable chip flow Tiger‑tec Silver graded WSM01 MM4 chipbreaker for consistent chip control Rhombic 35° form with 5° clearance angle Optimised for stainless steels and superalloys Exceptional grade for difficult-to-machine materials The WSM01 grade from the Tiger‑tec Silver line is a coated carbide formulation developed to handle rostfreier Stahl and high-temperature alloys. Its composition supports stable chip formation and resists edge wear under elevated temperatures and adhesion tendencies typical of these materials. By selecting this grade, workshops benefit from fewer unscheduled tool changes and a consistent surface finish, which improves process reliability and reduces overall machining cost per part. Geometry engineered for stable cutting and chip control The 35° rhombic form combined with a 5° clearance angle provides a versatile cutting profile for a wide range of turning operations. The MM4 chipbreaker is tuned to produce controlled, short chips in interrupted or continuous cuts, reducing risk of chip entanglement and improving workplace safety. The insert’s 0.4 mm corner radius balances edge strength and precision, allowing both robust cutting and repeatable dimensional control on components where tolerance and surface integrity matter. Productivity through longer tool life and process security With its coated carbide matrix and application-focused geometry, this indexable tool improves uptime and cutting stability. The robust grade and coating contribute to a longer effective edge life, which translates into fewer insert changes and less downtime. For production environments where cycle time and repeatability are key, this solution supports higher throughput and consistent component quality while preserving fixture and machine resources. Practical application advice and assurance This insert is suited to turning operations on materials classified under ISO groups M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), particularly where thermal load and adhesion present challenges. For optimal results, match cutting parameters and coolant strategy to the workpiece material and machine capability. If process parameters require fine-tuning, Metav Werkzeuge provides application support and can advise on recommended feeds, speeds and toolholder choices to maximise performance with this Walter Tools insert. Contact Metav Werkzeuge for tailored application support and to secure supply of Walter Tools Tiger‑tec Silver inserts for your production needs Technical Data SKU: VBMT110304-MM4-WSM01-WALTER Designation: VBMT110304-MM4 WSM01 Series: Tiger‑tec Silver Grade: WSM01 Form: Rhombus 35° Chipbreaker: MM4 Clearance angle: 5° Corner radius: 0.4 Plate size: 11 Plate thickness: 03 Tolerance class: M Execution: T Material application: S / M Facts Size: 11 Thickness code: 03 Corner radius: 0.4 Clearance: 5° Form angle: 35° Tolerance: M Special features Coated carbide grade WSM01 Tiger‑tec Silver series MM4 chipbreaker for controlled chips Suitable for rostfreier Stahl and superalloys Rhombic 35° insert geometry 0.4 mm corner radius for edge strength Brand: Walter Tools FAQ What materials is this insert intended for? This VBMT110304-MM4 WSM01 insert is intended for materials in ISO groups M and S, especially rostfreier Stahl and heat‑resistant superalloys. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker on the Walter Tools insert produces short, controllable chips that reduce entanglement and improve surface quality during turning operations. Can this insert be used for finishing passes? Yes, with its 0.4 mm corner radius and the Tiger‑tec Silver grade, the insert achieves a balance between finish quality and edge robustness suitable for many finishing applications. Is the insert compatible with standard VBMT toolholders? The VBMT110304-MM4 format follows the common VBMT designation and is compatible with holders designed for VBMT inserts; ensure correct clamping and seat condition for repeatable results. What benefits does the Tiger‑tec Silver series provide? Tiger‑tec Silver coatings enhance thermal stability and edge life for coated carbide grades like WSM01, improving process security and reducing wear in demanding turning tasks. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the listed manufacturer.
VBMT110304-MM4 WSM10S MM4 Wendeplatten - Walter Tools
Reliable machining of rostfreier Stahl and heat‑resistant alloys is achieved by combining the Tiger·tec Silver grade with a stable MM4 chipbreaker and precise rhombic geometry; this reduces downtime and improves process consistency. Order the VBMT110304‑MM4 WSM10S directly via Metav Werkzeuge or consult our specialists for application advice. VBMT110304‑MM4 WSM10S Turning insert (Rhombic 35°, 0.4 r) — Walter Tools VBMT110304‑MM4 WSM10S is a rhombic turning insert optimised for machining rostfreier Stahl and superalloys with enhanced heat resistance and stable chip control Tiger·tec Silver coating for high temperatures Stable cutting edge with consistent chip formation Rhombic 35° form, 0.4 mm corner radius MM4 chipbreaker for controlled chips Increased process reliability for high‑temperature materials The combination of the WSM10S grade and the Tiger·tec Silver coating delivers improved thermal resistance and stable chip formation when machining demanding alloys. Designed for applications with elevated cutting temperatures, the insert supports consistent cutting conditions and reduces the risk of build‑up on the cutting edge. As a result, cycle times become more predictable and the machining process requires fewer index changes, which contributes directly to higher overall productivity on the shop floor. Geometry that creates consistent surface quality The rhombic 35° outline and a 0.4 mm corner radius provide a balance between edge strength and the ability to generate a fine surface finish. With a 5° free angle and the MM4 chipbreaker, the insert controls chip flow while maintaining a stable cutting edge, which is particularly beneficial during interrupted cuts or when machining difficult‑to‑cut materials. These geometric choices reduce vibration and enable more repeatable part tolerances, translating into fewer reworks and less downstream inspection time. Practical benefits for production and tool management Suppliers and production planners will value the insert’s compatibility with both rostfreier Stahl and superalloys (material groups M and S), meaning fewer different grades are required for mixed production runs. The coated carbide grade and robust chipformer support longer tool life under severe cutting conditions, which lowers tooling consumption and helps contain operating costs. For applications where consistent performance matters, this indexable insert offers an efficient route to steady output and reliable component quality. For tailored recommendations on Walter Tools Tiger·tec Silver inserts and to confirm optimal cutting parameters for specific rostfreier Stahl grades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical advisors will assist with selection and setup. Technical data SKU: VBMT110304‑MM4‑WSM10S‑WALTER Designation: VBMT110304‑MM4 WSM10S Product type: Drehwendeschneidplatte / Turning indexable insert Series: Tiger‑tec Silver Grade: WSM10S Manufacturer: Walter Tools Execution: T Tolerance class: M Facts Plate size: 11 mm Plate thickness code: 03 Corner radius: 0.4 mm Free angle: 5° Form: Rhombus 35° Chipbreaker: MM4 Material suitability: S / M Special features Coated carbide grade (Tiger·tec Silver) Suitable for rostfreier Stahl and superalloys Designed for stable chip formation and edge life Optimised for productive turning applications FAQ Is this insert suitable for machining stainless steels? Yes. The VBMT110304‑MM4 WSM10S turning insert from Walter Tools is designed specifically for rostfreier Stahl (material group M) and delivers reliable performance under difficult cutting conditions. Which materials are covered by the S / M designation? The S / M marking indicates suitability for heat‑resistant superalloys and titanium (S) as well as rostfreier Stahl (M), making the insert versatile for high‑temperature and tough‑to‑cut materials. What is the advantage of the MM4 chipbreaker? The MM4 chipbreaker promotes controlled chip flow and consistent chip segmentation, improving process stability and reducing the likelihood of built‑up edge when machining demanding materials. How does the rhombic 35° form affect cutting? The rhombic 35° geometry provides a compact cutting edge angle that helps achieve good surface finish and access to profiles, while the 0.4 mm corner radius enhances edge strength for interrupted or heavy cuts. Can this insert reduce overall tooling costs? By combining a high‑performance grade with effective chip control and a robust geometry, the insert can extend tool life and reduce index changes, which contributes to lower tooling consumption and improved production efficiency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
VBMT110304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of a proven combination of high thermal resistance, stable chip control and precise geometry to maintain productivity when machining stainless steels and superalloys; order directly via Metav Werkzeuge or consult our specialists for application support and stock information. VBMT110304-MM4 WSM20S turning insert — Tiger·tec Silver for stainless and heat‑resistant alloys, Walter Tools VBMT110304-MM4 WSM20S is an indexable turning insert designed for heavy‑duty machining of heat‑resistant alloys and stainless steel, offering a balanced geometry for reliable chip formation and consistent surface quality Tiger·tec Silver for heat and wear resistance MM4 chipbreaker ensures stable chip control Rhombus 35° form for flexible cutting angles Corner radius 0.4 mm for fine surface finish High productivity through heat‑resistant coated carbide and chip control The combination of coated carbide technology and a purpose‑built MM4 chipbreaker delivers measurable production benefits when cutting difficult materials. The Tiger·tec Silver series provides improved thermal stability and abrasion resistance, which reduces flank wear and helps maintain cutting edge integrity in long cycles. This results in fewer insert changes and longer uninterrupted machining time, supporting higher throughput and lower overall tooling intervention. The insert’s geometry is optimised to promote a predictable chip flow, reducing interruptions from chip entanglement and enabling stable cutting forces during continuous turning operations. Suited for stainless steels and superalloys with precise geometry With a Rhombus 35° form, a 5° relief angle and a 0.4 mm corner radius, this insert balances strength and finish capability for a wide range of turning tasks. The moderate approach angle supports versatile engagement on facing and profiling, while the small corner radius is tailored for finer surface finish and dimensional control. The grade and geometry are particularly effective for ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), where heat management and edge stability are critical. The result is consistent part quality and predictable tool life across mixed batch production. Reliability, repeatability and handling advantages for the workshop The insert’s standard form and tolerance class M ensure reproducible seat and clamping conditions in common toolholders, reducing setup variability and inspection effort. The compact plate size and thickness combination provide robust insertion into standard toolheads while allowing effective access in constrained setups. Using a familiar ISO designation simplifies tool management and reorder processes; the VBMT110304‑MM4 WSM20S designation aligns with standardised holder systems, supporting quick replacements and straightforward inventory control. These traits contribute to lower process variance and improved day‑to‑day machining reliability. Contact Metav Werkzeuge for application advice, availability and tailored recommendations for Walter Tools Tiger·tec Silver inserts; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: VBMT110304-MM4-WSM20S-WALTER Name: Drehwendeschneidplatte VBMT110304-MM4 WSM20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade/sort: WSM20S ISO designation: VBMT110304-MM4 WSM20S Facts Plate size: 11 mm Plate thickness: 03 Corner radius: 0.4 mm Relief angle: 5° Tolerance class: M Special features Chipbreaker: MM4 Plate form: Rhombus 35° Execution: T Material suitability: S / M UID: VBMT110304-MM4-WSM20S-WALTER FAQ What materials is this insert intended for? This insert is specified for machining stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S) as indicated by the WSM20S grade and Tiger·tec Silver series. How does the MM4 chipbreaker affect performance? The MM4 chipbreaker on the VBMT110304‑MM4 WSM20S promotes controlled chip formation and evacuation, reducing the risk of chip jams and supporting stable cutting forces in continuous turning operations. Can this insert be used for finishing passes? Yes, the 0.4 mm corner radius and rhombic geometry support fine surface finishes and dimensional control, making the insert suitable for finishing and light‑to‑medium turning cuts. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver coating enhances thermal and wear resistance, improving edge life and process stability when machining demanding materials with the VBMT110304‑MM4 WSM20S insert. Is the insert compatible with standard toolholders? The ISO designation and tolerance class M ensure compatibility with common indexable turning toolholders designed for VBMT‑style inserts. Manufacturer: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification purposes only. There is no affiliation between our company and the brands cited. The offered item is original, brand‑new merchandise supplied by the stated manufacturer.
VBMT110304-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the MP4 chipbreaker ensures consistent chip control and extended tool life for steel turning, delivering reliable, repeatable results and reduced rework. The economical insert geometry and medium tolerance class support productive series machining. Order the VBMT110304-MP4 WPP10G directly via Metav Werkzeuge or consult the team for application advice. VBMT110304-MP4 WPP10G — Indexable turning insert, Tiger·tec Gold, Walter Tools The VBMT110304-MP4 WPP10G is an indexable turning insert developed for precision steel machining, combining a Tiger·tec Gold coating with an MP4 chipbreaker for stable chipflow and reproducible surface quality. Tiger·tec Gold coated carbide MP4 chipbreaker for stable chipflow Rhombic 35° insert geometry 0.4 mm corner radius, 5° clearance Consistent performance for steel turning operations The combination of the Tiger·tec Gold coating and the base carbide substrate provides enhanced wear resistance and thermal stability during prolonged machining of steel (ISO group P). The chemical and physical properties of the coating reduce abrasive and adhesive wear, which stabilises the cutting edge and extends the usable life of the insert. For production environments where repeatability matters, this results in fewer tool changes and more predictable component tolerances. Predictable chip formation and improved surface finish The MP4 chipbreaker is engineered to shape and evacuate chips effectively, promoting continuous chip control even under varying cut depths. The Rhombic 35° geometry offers a balanced entry angle that lowers cutting forces while the 0.4 mm corner radius supports fine finishing passes. The 5° clearance prevents excessive flank rubbing, which helps to maintain a consistent surface texture and reduces the need for secondary finishing. In practice, this means improved first-pass quality and lower rework rates. Productivity through dimensional stability and tolerance control Featuring an M tolerance class, the insert provides a reliable fit and repeatable indexability in toolholders, aiding fast changeovers and consistent set-up results. The design emphasises consistent tool life and predictable wear behaviour, which helps production planners achieve higher throughput and stable process windows. Where machining steel to ISO P standards is the primary task, this insert supports economical, high-volume turning with regular performance. For tailored recommendations on integrating the VBMT110304-MP4 WPP10G into production or for assistance specifying cutting data and availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: VBMT110304-MP4-WPP10G-WALTER Label: VBMT110304-MP4 WPP10G (indexable turning insert, Walter Tools) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Corner radius: 0.4 mm Clearance angle: 5° Plate size: 11 Plate thickness code: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: MP4 Insert form: Rhombus 35° Execution: T Suitable for: steel (ISO P) FAQ What materials is this insert suitable for? The VBMT110304-MP4 WPP10G is intended primarily for steel machining (ISO group P), with the WPP10G grade optimised for the heat and chip formation typical of steel turning. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker on the insert shapes chips for controlled evacuation, reducing heat concentration at the cutting edge and supporting stable surface finishes with fewer built-up edge issues. What finishing capability does the 0.4 mm corner radius provide? A 0.4 mm corner radius allows the insert to perform accurate finishing passes while maintaining edge strength, delivering improved surface quality without sacrificing durability. What does the M tolerance class mean for toolholders? Tolerance class M indicates medium dimensional accuracy for repeatable indexability; this helps ensure consistent seating in standard toolholders and predictable machining offsets. Is the Tiger·tec Gold coating beneficial for interrupted cuts? Yes, the Tiger·tec Gold coating enhances edge stability and wear resistance, improving performance in many turning scenarios, including intermittent cutting typical in production environments. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the brands named. The offered item is original, brand-new merchandise from the manufacturer.
VBMT110304-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold coating combined with an MP4 chipbreaker delivers consistent chip control and extended edge life for steel turning operations. Benefit from stable cutting behaviour, reproducible surface quality and straightforward insert indexing; order the insert directly via Metav Werkzeuge or request tailored selection advice from our consultants. VBMT110304-MP4 WPP20G – Rhombic 35° turning insert, Tiger·tec Gold coating, MP4 chipbreaker (Walter Tools) The VBMT110304-MP4 WPP20G is a rhombic 35° turning insert with an MP4 chipbreaker, engineered for reliable steel turning in production and job-shop environments. Tiger·tec Gold coating for long tool life MP4 chipbreaker for consistent chip control Optimised for steel turning applications Rhombic 35° form with 0.4 mm corner radius Higher uptime through advanced coating technology The combination of Tiger·tec Gold and a coated carbide substrate reduces flank and crater wear under typical steel cutting conditions. The coating system is designed to lower adhesive wear and improve thermal stability, which translates into longer tool life and fewer insert changes during long production runs. For manufacturers seeking predictable edge performance, this insert keeps process windows stable and reduces scrap rates. The protective layer also supports higher cutting speeds in many steel applications while maintaining surface finish and dimensional repeatability. Improved process control with defined chip formation The MP4 chipbreaker and rhombic 35° geometry are optimised for controlled chip evacuation and a reliable cutting edge engagement. A 0.4 mm corner radius and a 5° relief angle support both finishing and light-medium roughing passes, delivering consistent surface quality and reduced vibration. The insert geometry eases indexability and repeatable seating in standard toolholders, which helps operators achieve consistent part results across shifts. Stable chip control reduces manual intervention and contributes to safer, more efficient machining cycles. Clear suitability and economic advantages for steel turning Classified for the ISO group P, the grade provides a balanced hardness and toughness profile tailored to unalloyed and alloyed steel. The WPP20G grade offers a compromise between wear resistance and toughness, making it suitable for varied steels encountered in general turning. The insert’s tolerance class M and series design ensure reproducible performance, lowering process variance and supporting higher productivity. Specifying this turning insert reduces total machining costs through extended edge life, consistent part quality and simplified inventory management. For reliable performance with Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored advice and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss VBMT110304-MP4 WPP20G suitability for specific turning tasks Technical Data Article number: VBMT110304-MP4-WPP20G-WALTER Label: Drehwendeschneidplatte VBMT110304-MP4 WPP20G Walter Tools Type: Turning insert Manufacturer: Walter Tools Core Data Grade: WPP20G Series: Tiger-tec Gold Chipbreaker: MP4 Form: Rhombus 35° Specifications Plate size: 11 Plate thickness: 03 Relief angle: 5° Corner radius: 0.4 mm Tolerance class: M Execution: T Material group: P (steel) FAQ What materials is this insert designed for? This insert is specified for the ISO group P and is therefore intended primarily for machining various steels; the VBMT110304-MP4 WPP20G performs well on unalloyed and alloyed steel grades. Can the insert handle finishing and light roughing in one tool? Yes, the combination of the rhombic geometry, 0.4 mm corner radius and MP4 chipbreaker supports both finishing and light to medium roughing passes with reproducible surface quality. How does the Tiger·tec Gold coating influence cutting parameters? The Tiger·tec Gold coating increases thermal stability and wear resistance, allowing for higher cutting speeds in many steel applications while maintaining edge life and surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original new goods from the manufacturer (Walter Tools).
VBMT110308-FM6 WSM10S WSM10S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating, the WSM10S grade and the FM6 chipbreaker for reliable chip control and extended tool life when machining stainless steel and high-temperature alloys; order the VBMT110308-FM6 WSM10S through Metav Werkzeuge or consult our specialists for application-specific advice. VBMT110308-FM6 WSM10S — Rhombic 35° indexable turning insert for stainless steel and superalloys, Walter Tools The VBMT110308-FM6 WSM10S is a rhombic 35° indexable turning insert designed for secure, high-performance turning of stainless steel and heat-resistant superalloys and titanium, combining a coated carbide grade with a dedicated chip control geometry. Tiger·tec Silver coated carbide for durability Geometry Rhombic 35° for versatile turning FM6 chipbreaker for stable chip control 0.8 mm corner radius and 5° clearance Higher productivity for difficult-to-cut materials The combination of the Tiger·tec Silver coating and the WSM10S grade provides enhanced resistance to thermal and mechanical wear, specifically tailored for stainless steel and heat-resistant superalloys. This insert promotes stable chip formation and a consistently maintained cutting edge, reducing the frequency of tool changes and improving uptime. The coated carbide chemistry supports higher cutting temperatures, which results in more consistent component tolerances and a reduced risk of built-up edge when turning tough materials. Geometry engineered for consistent surface quality The Rhombic 35° shape, with a 0.8 mm corner radius and 5° clearance angle, gives a balanced cutting geometry that supports good surface finish while maintaining edge strength. The FM6 chipbreaker is optimised for controlled chip evacuation under interrupted and continuous cuts, lowering the tendency for snarled or long chips. This geometry makes the insert suitable for a range of turning tasks where a mix of finishing and light roughing is required, delivering repeatable results and predictable tool behaviour. Process security and application guidance Designed for industry use, the insert supports machining strategies where workpiece material and process stability are critical. The plate’s coded thickness and size ensure compatibility with standard toolholders in the same family; the specified grade helps to maintain cutting-edge integrity across longer production runs. For customers requiring integration into specific machining cycles or for validation of cutting data, Metav Werkzeuge offers application guidance and can supply sample recommendations based on component material and cycle parameters. Contact Metav Werkzeuge today for application-specific recommendations and sample availability for Walter Tools Tiger·tec Silver WSM10S inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VBMT110308-FM6-WSM10S-WALTER Name: Drehwendeschneidplatte VBMT110308-FM6 WSM10S Walter Tools Type: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM10S ISO designation: VBMT110308-FM6 WSM10S Facts Size: 11 Thickness: 03 Corner radius: 0.8 mm Clearance angle: 5° Tolerance class: M Special features Tiger·tec Silver coated carbide WSM10S coated grade for stainless steel and superalloys FM6 chipbreaker for controlled chips Rhombic 35° insert form Suitable for stainless steel and heat-resistant superalloys / titanium FAQ What materials is this insert suitable for? The VBMT110308-FM6 WSM10S insert from Walter Tools is specified for stainless steel and heat-resistant superalloys (ISO groups M and S), making it suitable for challenging, high-temperature materials. How does the FM6 chipbreaker influence machining? The FM6 chipbreaker on the VBMT110308-FM6 supports stable chip control and aids safe evacuation of chips during turning, which improves process reliability and surface finish. What does the 0.8 mm corner radius mean for component finish? A 0.8 mm corner radius increases edge strength and helps achieve a robust, consistent surface quality while offering compromise between finishing and light roughing operations. Is the VBMT110308-FM6 compatible with standard toolholders? The VBMT110308-FM6 WSM10S follows common ISO insert dimensions and fits holders designed for rhombic 35° inserts of the same size and thickness. Can this insert handle interrupted cuts or heavy cross-feed? The combination of the WSM10S grade and FM6 chipbreaker improves edge stability and chip control, which supports interrupted cuts better than uncoated or general-purpose grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are used here for identification and explanation only. The mentioned brand Walter Tools is included where relevant. The article offered is an original, factory-new product of the manufacturer.
VBMT110308-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coated grade and the FM6 chipbreaker for stable chip control and consistent edge life; the rhombic 35° geometry with a 0.8 mm corner radius provides reliable surface quality in demanding turning processes. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. VBMT110308-FM6 WSM20S — turning indexable insert, Tiger·tec Silver, for stainless steels and superalloys (Walter Tools) The VBMT110308-FM6 WSM20S is a rhombic 35° turning insert engineered for reliable metal removal in stainless steels and heat‑resistant superalloys, offering a balance of wear resistance and cutting‑edge stability. Tiger·tec Silver coated grade WSM20S FM6 chipbreaker for stable chip control Rhombic 35° form, 0.8 mm corner radius 5° clearance angle for secure cutting Consistent performance in demanding materials The WSM20S grade, part of the Tiger·tec Silver family, combines a wear‑resistant coated carbide with a substrate engineered for thermal and mechanical stability. This composition supports repeatable cutting performance when machining stainless steels and superalloys, materials that commonly cause rapid tool wear and built‑up edge. The coated surface reduces friction and improves heat resistance, which translates into longer tool life and fewer insert changes, supporting continuous, predictable production runs. Secure chip control and improved surface quality Equipped with the FM6 chipbreaker and a rhombic 35° geometry, the insert promotes controlled chip formation and evacuation during turning operations. The 0.8 mm corner radius delivers a good compromise between edge strength and finish, helping to avoid chatter and reduce surface irregularities. For operations where consistent surface quality is crucial, this geometry and chipbreaker combination reduces secondary operations and shortens cycle times. Predictable tool life and straightforward setup A modest 5° clearance angle and the insert’s tolerance class M contribute to reliable seating and repeatable cutting conditions in standardized toolholders. The robust coating and grade choice provide resistance to flank wear and thermal loading, enabling stable tool life across batches. This predictability simplifies process planning and reduces the need for frequent parameter adjustments, improving overall machine uptime. Practical integration into production workflows Designed for conventional turning applications with holders accepting the VBMT form, this insert integrates smoothly into existing tool sets. Its suitability for S and M material groups means the same grade can cover stainless steels and heat‑resistant alloys, reducing tooling variants in stock. The result is enhanced process security and consistent part quality in small‑batch and serial production alike. For reliable machining of rostfreiem Stahl and superalloys, request the VBMT110308-FM6 WSM20S Tiger·tec Silver insert from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice and quick availability Technical data Article number: VBMT110308-FM6-WSM20S-WALTER Product: Turning indexable insert Designation: VBMT110308-FM6 WSM20S Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM6 Geometry: Rhombic 35° Corner radius: 0.8 mm Clearance angle: 5° Form size: 11 Thickness code: 03 Tolerance class: M Manufacturer: Walter Tools Core data Corner radius: 0.8 mm Clearance angle: 5° Form size: 11 Thickness code: 03 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Material suitability: S (superalloys), M (stainless steels) Intended application: turning operations, heavy or hard‑to‑cut materials Geometry: rhombic 35° for versatile turning tasks FAQ What materials is this insert suitable for? The VBMT110308-FM6 WSM20S insert is specified for stainless steels (M) and heat‑resistant superalloys (S); the Tiger·tec Silver coating and WSM20S grade provide thermal and wear resistance for these challenging materials. What does the FM6 chipbreaker achieve? The FM6 chipbreaker on this insert promotes controlled chip formation and evacuation, improving process stability and surface finish during turning operations with the VBMT110308‑FM6 geometry. Which edge preparation and finish can be expected? With a 0.8 mm corner radius and rhombic 35° form, the insert supports robust edge strength while delivering good surface quality, reducing the need for downstream finishing in many applications. Is the insert compatible with standard VBMT holders? Yes, the insert follows the VBMT form and is intended for standard toolholders that accept rhombic 35° indexable inserts; ensure correct clamping and seating per the holder manufacturer’s guidance. What is the benefit of the Tiger·tec Silver series? The Tiger·tec Silver coating provides a balance of low friction and thermal resistance, extending cutting edge life and improving consistency when machining stainless steels and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT110308-FM6 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust FM6 chipbreaker and precision geometry for dependable performance in stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or ask their consultants for application support. VBMT110308-FM6 WSM30S Rhombic 35° indexable turning insert — Walter Tools, 5° clearance, 0.8 mm corner radius VBMT110308-FM6 WSM30S is a coated carbide indexable insert designed for heavy and difficult turning on stainless steels and heat‑resistant superalloys; the insert suits demanding production and repair environments Tiger·tec Silver coating technology Optimised FM6 chipbreaker for stable chips Rhombic 35° cutting geometry 5° clearance with 0.8 mm corner radius High‑performance coating that extends tool life and process stability The Tiger·tec Silver coating and the WSM30S grade combine to deliver enhanced edge stability and thermal resistance when machining stainless steels and demanding alloys. Thanks to the multilayer coated carbide substrate, the insert supports secure chip formation and helps to reduce flank wear under elevated temperatures. This results in longer service intervals and fewer tool changes, which directly improves productivity in serial turning and batch production. The described surface treatment also contributes to improved surface finish on workpieces that are prone to built‑up edge formation. Geometry and chip control for consistent machining results The rhombic 35° shape paired with the FM6 chipbreaker provides a balanced mix of cutting versatility and chip control. The combination of a 5° clearance angle and a 0.8 mm corner radius stabilises the cutting edge and allows steady material removal across interrupted cuts or variable depths of cut. These geometric choices reduce vibration and support reproducible dimensional accuracy, which is particularly valuable where tight tolerances and repeatable component quality are required. The indexable format enables rapid index changes, keeping machine uptime high. Application focus and machining recommendations This insert is specified for materials in ISO groups M and S, meaning it is particularly suitable for rostfreie Stähle (stainless steels) as well as heat‑resistant superalloys and titanium, where thermal loads and work‑hardening are common challenges. For stable results, pairing the insert with a rigid toolholder and optimised cutting parameters for each workpiece material is recommended; lower feed rates with adequate coolant or through‑tool lubrication often improve chip breaking and surface quality. The plate’s tolerance class M and robust grade selection support reproducible performance across series production. Integration into production and service support As an indexable turning solution from Walter Tools, this insert is intended for integration into standard turning tool systems and is compatible with common clamping standards for VBMT‑type plates. The balance of coating technology, chipbreaker design and geometry makes it suitable for shops seeking to reduce cycle times while maintaining component quality. For complex applications or unfamiliar material grades, technical consultation is available to align cutting data and holder selection with process targets, ensuring efficient ramp‑up from trial to full production. Contact Metav Werkzeuge today for tailored cutting data and to discuss availability of the Walter Tools VBMT110308-FM6 WSM30S insert through their sales team. Technical data SKU: VBMT110308-FM6-WSM30S-WALTER Article designation: VBMT110308-FM6 WSM30S Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Silver Facts Clearance angle: 5° Corner radius: 0.8 mm Insert form: Rhombus 35° Insert size: 11 Plate thickness: 03 Tolerance class: M Special features Grade: WSM30S Chipbreaker: FM6 Coating technology: Tiger·tec Silver Suitable for: stainless steels (ISO M) Suitable for: heat‑resistant superalloys and titanium (ISO S) Execution: T Type designation: VBMT110308-FM6 FAQ What materials is the insert best suited for? The Walter Tools VBMT110308‑FM6 WSM30S insert is engineered for stainless steels (ISO M) and for heat‑resistant superalloys and titanium (ISO S), offering thermal resistance and stable chip control for these difficult‑to‑cut groups. How does the FM6 chipbreaker affect machining? The FM6 chipbreaker shapes and controls chip flow to reduce entanglement and support consistent surface finish; in the VBMT110308‑FM6 configuration it encourages short, manageable chips under recommended feeds and speeds. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances edge stability and heat resistance, which extends tool life and improves resistance to built‑up edge when machining stainless and superalloy materials. Is the insert suitable for interrupted cuts? Yes, the rhombic 35° geometry together with the 0.8 mm corner radius and robust substrate make the insert appropriate for applications involving moderate interruption, provided a rigid holder is used. Can the insert be reground or reconditioned? This insert is a precision indexable plate intended for indexing rather than regrinding; replacement or indexing is the recommended approach to maintain consistent geometry and tolerance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com