TS22-ER6UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, WMP32G coated carbide and the ER6UN chipbreaker for consistent chip control and longer insert life; order directly via Metav Werkzeuge or contact the consultants for application advice. TS22-ER6UN WMP32G indexable turning insert — Tiger·tec Gold coating, for stainless steels — Walter Tools TS22-ER6UN WMP32G is an indexable turning insert engineered to secure stable cutting edges and reliable chip formation when machining stainless steels in medium to robust conditions. Tiger·tec Gold coating ER6UN chipbreaker for stable chips Suited for stainless steels (M) Coated carbide grade WMP32G Higher throughput through controlled chip formation The combination of the Tiger·tec Gold technology and the WMP32G grade promotes stable chip formation, which reduces interruptions from built-up edge and chip jams. The ER6UN chipbreaker geometry is optimised to break and evacuate chips reliably in tougher stainless steels, translating to fewer stoppages and higher effective machining time. Coating layers on the coated carbide reduce friction and thermal load at the cutting edge, so cycle times can be improved without sacrificing edge integrity. Predictable tool life for less downtime Designed for medium to robust operations, the insert delivers reproducible performance across batches, supporting process stability on production lines. The WMP32G grade is a coated carbide formulation tailored to resist the adhesive wear and heat sensitivity typical of stainless steels; this yields more predictable wear behaviour and longer interval between index changes. For production planning this means reduced tool inventory turnover and improved throughput consistency. Practical selection and application advice As an indexable turning insert, this component is suitable for general turning tasks in stainless steels where secure edge retention and chip control are priorities. The ER6UN chipbreaker is particularly effective in operations that generate long, stringy chips; it helps convert problematic chips into manageable segments. Where surface finish is important, the coated carbide and the Tiger·tec Gold series support a compromise between edge robustness and finish quality, allowing both semi-finishing and heavier passes without immediate edge failure. For technical selection or cutting-parameter recommendations for this Walter Tools insert, contact Metav Werkzeuge for product-matching support and application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS22-ER6UN-WMP32G-WALTER Designation: TS22-ER6UN WMP32G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Material group: M (stainless steels) Grade: WMP32G Series: Tiger·tec Gold Special features ER6UN chipbreaker Coated carbide (coated hardmetal) Optimised for stable chip control Intended for medium to robust machining conditions FAQ What materials is this insert suitable for? The TS22-ER6UN WMP32G insert from Walter Tools is intended primarily for stainless steels (material group M) and performs well under medium to robust cutting conditions. What does the ER6UN chipbreaker do? The ER6UN chipbreaker geometry on the insert controls chip shape and evacuation, improving chip control and reducing the risk of stringing or entanglement during turning of stainless steels. How does the Tiger·tec Gold series improve performance? Tiger·tec Gold coating enhances thermal and wear resistance on the cutting edge; when combined with the WMP32G grade it delivers more consistent tool life and reliable cutting behaviour on tougher materials. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only. The offered article is an original, factory-new product of the manufacturer.
TS22-ER7UN WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold grade and the ER7UN chipbreaker to secure stable chip formation and reliable edge life in rostfreier Stahl applications; order directly via Metav Werkzeuge or request application support from our consultants. Drehwendeschneidplatte TS22-ER7UN WMP32G – indexable turning insert, Tiger·tec Gold, for rostfreier Stahl (Walter Tools) A TS22-ER7UN WMP32G indexable turning insert designed for medium to robust machining of rostfreier Stahl, combining a coated carbide grade with an optimised ER7UN chipbreaker for secure chip control Tiger·tec Gold coated carbide grade WMP32G Optimised ER7UN chipbreaker for secure chip control Designed for rostfreier Stahl machining Walter Tools manufacturing quality and stable cutting edge Maximised process security for rostfreier Stahl machining The core advantage of this insert lies in the Tiger·tec Gold coating and the WMP32G grade, engineered specifically for machining rostfreier Stahl. The combination of a coated carbide substrate and the ER7UN chipbreaker supports stable chip formation and reduces the risk of built-up edge, which are common challenges with these tough, heat-prone alloys. For production environments this means fewer interrupted cycles and a more consistent surface finish, translating into measurable productivity gains and less scrap. The technical design focuses on repeatable performance under medium to robust cutting conditions. Longer edge life reduces downtime and tooling costs Thanks to the optimized substrate and coating, the insert offers a stable cutting edge that endures cyclic thermal and mechanical loads better than standard grades. This longevity supports predictable tool-change intervals and lower total cost of ownership in series production. The insert’s balanced design prioritises wear resistance while maintaining cutting reliability; the result is a dependable tool that keeps machine time productive. Where consistent part quality and minimal rework are priorities, this grade provides a clear advantage in everyday turning operations. Practical selection and safe implementation guidance Selection of the correct insert geometry and cutting data is decisive for achieving the benefits described. The ER7UN chipbreaker is suited to medium to heavier feed ranges typical in rostfreier Stahl turning; matching feed and cutting speed to the grade ensures optimal chip control and surface integrity. If specific application parameters are uncertain, consult machining data sheets or seek tailored advice to match insert geometry, clamping system and machine capability. Clear, pragmatic guidance helps integrate the insert into existing workflows with minimal testing and rapid ramp-up. For tailored application advice, availability checks or batch requirements for the Walter Tools TS22-ER7UN WMP32G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert support and rapid response. Technical Data SKU: TS22-ER7UN-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-ER7UN WMP32G Walter Tools Product type: Drehwendeschneidplatte Facts No numerical core data provided in the dataset Special features Series: Tiger·tec Gold Grade / Sorte: WMP32G Chipbreaker: ER7UN Material application: rostfreier Stahl Substrate/coating: beschichtetes Hartmetall (coated carbide) FAQ What materials is this insert designed for? The TS22-ER7UN WMP32G insert is designed primarily for machining rostfreier Stahl, with the WMP32G grade optimised to manage toughness and heat sensitivity. How does the ER7UN chipbreaker affect machining behaviour? The ER7UN chipbreaker promotes secure chip control and regular chip segmentation, improving process stability and reducing the likelihood of built-up edge when turning rostfreier Stahl. Is this insert suitable for high-feed or finishing operations? The insert is optimised for medium to robust cutting conditions; feed and speed should be selected according to the desired balance between metal removal rate and surface finish. Which benefits does the Tiger·tec Gold technology provide? Tiger·tec Gold delivers improved wear resistance and edge stability through an advanced coating architecture, which helps lengthen tool life and maintain consistent cutting performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS22-IL-N60 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold technology, the WMP32G coated grade and the IL‑N60 chipbreaker to ensure stable cutting edges and controlled chip formation when machining rostfreien Stahl; order directly via Metav Werkzeuge or request technical advice from the consultants. TS22-IL-N60 WMP32G Turning Indexable Insert — Tiger·tec Gold for rostfreien Stahl — Walter Tools The TS22-IL-N60 WMP32G is an indexable turning insert designed for medium to robust turning tasks, optimised for machining rostfreien Stahl with a coated carbide grade from the Tiger·tec Gold series Tiger·tec Gold coated for extended tool life IL‑N60 chipbreaker for stable chip control Coated carbide grade WMP32G for rostfreie Stähle ISO designation TS22‑IL‑N60 for easy matching Consistent cutting performance for rostfreien Stahl The TS22‑IL‑N60 WMP32G insert combines a coated carbide substrate with Tiger·tec Gold technology to address the specific demands of machining rostfreien Stahl. The WMP32G grade is formulated for moderate to robust cutting conditions and supports secure chip formation and a stable cutting edge, which reduces the risk of built‑up edge that commonly affects stainless materials. The coating improves wear resistance and thermal stability, helping to maintain dimensional accuracy over longer tool life. As a result, the insert contributes to predictable cycle times and fewer interruptions for tool changes, supporting efficient shopfloor scheduling. Predictable chip control and higher process security The IL‑N60 chipbreaker is tailored for the toughness and work‑hardening tendency of rostfreien Stahl, producing short, controlled chips under a range of cutting parameters. This chip geometry reduces the likelihood of chip entanglement and supports continuous material evacuation at medium to robust depths of cut. The consequence is enhanced process security and a lower probability of surface damage or rework. Where consistent surface finish and repeatable results are required, the combination of grade and chipbreaker delivers measurable gains in productivity and component quality, particularly in series production environments. Simple integration into turning tool systems and clear application scope Marked by the ISO designation TS22‑IL‑N60 WMP32G, the insert fits standard indexable turning toolholders configured for this geometry and can be specified without ambiguity in tooling lists. The material classification M indicates suitability for rostfreie Stähle and the insert is recommended for applications where moderate to robust cutting forces occur. The design supports straightforward indexing and quick corner changes, which helps to keep setup times low. For specification matching, holder selection and process parameter recommendation, Metav Werkzeuge provides technical guidance to ensure optimal application of the insert within existing machining cells. For machining rostfreien Stahl with proven Tiger·tec Gold performance and reliable chip control, contact Metav Werkzeuge for tailored advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Product details Article number: TS22-IL-N60-WMP32G-WALTER SKU: TS22-IL-N60-WMP32G-WALTER Type: Drehwendeschneidplatte Brand: Walter Tools Core data Material group: M (rostfreie Stähle) Series: Tiger·tec Gold Chipbreaker: IL‑N60 ISO designation: TS22‑IL‑N60 WMP32G Special features Coated grade: WMP32G (coated carbide) Suitable for: rostfreien Stahl Stable chip formation for medium to robust turning Optimised for process security and repeatability Indexable turning insert geometry FAQ Which materials is this insert intended for? The TS22‑IL‑N60 WMP32G insert is intended primarily for rostfreien Stahl, indicated by material group M and optimised for the specific challenges of those alloys. What does the WMP32G grade offer? WMP32G is a coated carbide grade within the Tiger·tec Gold series that provides enhanced wear resistance and thermal stability for sustained performance when machining rostfreie Stähle. How does the IL‑N60 chipbreaker affect machining? The IL‑N60 chipbreaker produces short, controllable chips under medium to robust cutting conditions, improving chip evacuation and contributing to process security during turning operations. Can this insert be used for finishing operations? The insert is designed for medium to robust turning; while it can produce good surface finishes under appropriate parameters, it is primarily specified for applications where stable cutting and chip control are required rather than ultra‑fine finishing. How is the insert referenced for tool lists and ordering? Refer to the ISO designation TS22‑IL‑N60 WMP32G and the SKU TS22‑IL‑N60‑WMP32G‑WALTER for unambiguous specification in procurement and tooling documentation. Protected trademarks and trade names belong to their respective owners. Brand names and registered marks are used solely for explanatory purposes to describe compatibility and origin; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is original, brand‑new merchandise from the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
TS22-IL3.5ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant grade, optimised chip control and Tiger‑tec Gold technology for steady production in rostfreier Stahl turning; order through Metav Werkzeuge or consult their experts for process support. TS22-IL3.5ISO WMP32G — Indexable turning insert for rostfreier Stahl (Walter Tools, Tiger‑tec Gold) The TS22-IL3.5ISO WMP32G is an indexable turning insert engineered for secure chip formation and reliable performance when machining rostfreier Stahl in medium to robust conditions. Tiger‑tec Gold coated carbide grade WMP32G Optimised IL3.5ISO chipformer for secure chips Designed for machining rostfreier Stahl (ISO M) Consistent productivity for rostfreier Stahl turning The combination of the WMP32G grade and the Tiger‑tec Gold technology is designed to keep cycle times steady when machining rostfreier Stahl. The coated carbide substrate supports a stable cutting edge and reduces the risk of built‑up edge under higher temperatures and tougher material behaviour. As a result, insert changes are less frequent and process reliability improves, which supports predictable production throughput and lower unit costs per part. Controlled chip formation reduces downtime The IL3.5ISO chipformer is engineered for secure chip fragmentation and evacuation in interrupted or continuous cuts typical for rostfreier Stahl machining. Controlled chips lower the likelihood of workpiece damage and reduce manual chip handling, which in turn decreases machine downtime. This improves overall equipment effectiveness and allows the tool to operate under medium to robust cutting conditions with fewer interruptions. Coating and grade deliver longer service life The Tiger‑tec Gold coating on the WMP32G grade provides enhanced wear resistance and thermal stability compared with uncoated grades. That improved surface hardness and heat management help maintain a sharp cutting edge over longer tool life, meaning fewer indexings and lower tooling consumption. The result is a more economical process with consistent surface finishes and enhanced repeatability of the machining operation. Practical application guidance for reliable results The insert is suitable for the ISO M group and is intended for rostfreier Stahl applications where toughness and heat generation are significant factors. For best results, pair the indexable insert with a compatible toolholder and an appropriate cutting fluid strategy to support chip evacuation and heat control. Process optimisation is recommended to match feed and depth of cut to the specific rostfreier Stahl grade and machine capabilities. For productive rostfreier Stahl machining with Walter Tools' Tiger‑tec Gold, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TS22-IL3.5ISO-WMP32G-WALTER SKU: TS22-IL3.5ISO-WMP32G-WALTER Designation: TS22-IL3.5ISO WMP32G Brand: Walter Tools Series: Tiger‑tec Gold Facts Material group: M (rostfreier Stahl) Grade: WMP32G Chipformer: IL3.5ISO Product type: Indexable turning insert Special features Tiger‑tec Gold coating Optimised chip control (IL3.5ISO) Suitable for rostfreier Stahl (ISO M) Coated carbide grade for medium to robust conditions Stable cutting edge for repeatable results FAQ What material group is this insert intended for? The insert is specified for the ISO M group and is suitable for machining rostfreier Stahl with the TS22-IL3.5ISO WMP32G indexable insert from Walter Tools. How does the IL3.5ISO chipformer affect machining? The IL3.5ISO chipformer promotes controlled chip fragmentation and evacuation, improving process stability and reducing interruptions during rostfreier Stahl turning. Which coating and grade does this insert use? This indexable insert uses the WMP32G grade with Tiger‑tec Gold coating to enhance wear resistance and thermal stability in demanding rostfreier Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from Walter Tools.
TS22-IL4.0ISO WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WMP32G grade and the IL4.0ISO chipbreaker for stable chip formation and extended edge life — order directly via Metav Werkzeuge or request specialist advice from their consultants. TS22-IL4.0ISO WMP32G indexable turning insert – Tiger·tec Gold for stainless steels | Walter Tools The TS22-IL4.0ISO WMP32G is an indexable turning insert from the Tiger·tec Gold series, engineered for secure, productive machining of stainless steels under medium to robust conditions. Tiger·tec Gold coating for long tool life Optimised chip control with IL4.0ISO breaker Designed for machining stainless steels (M) Walter Tools quality and process reliability Extended edge life for consistent component quality The coated WMP32G grade, part of the Tiger·tec Gold family, is a coated carbide designed specifically to balance wear resistance and toughness when machining stainless steels. This combination reduces the tendency for built-up edge and supports a stable cutting edge over longer cycles, which in turn leads to more predictable surface quality and fewer in-process interruptions. For operations with mixed batches or variable feed rates, the grade’s formulation helps maintain repeatable performance and lower scrap rates. Predictable chip control that improves cycle reliability The IL4.0ISO chipbreaker is optimised to produce short, controllable chips in demanding stainless-steel turning. Stable chip formation reduces toolholder stresses and the risk of entanglement, allowing for more consistent machine uptime and safer handling at the bench. When paired with an appropriate clamping system and correct cutting data, the insert’s chip geometry supports process stability and contributes to improved overall productivity. Practical selection and application guidance for workshops As an indexable turning insert supplied under the Walter Tools portfolio, this item is suitable where stainless-steel machinability demands a robust grade and effective chip control. Selection should consider the intended feed and depth of cut: the grade is aimed at medium to robust cutting conditions rather than fine finishing passes. The insert’s role is to deliver a reliable compromise between wear protection and edge stability, making it a pragmatic choice for batch production and repair tasks where consistent results matter. Material suitability and process advantages The grade is explicitly specified for the ISO material group M (stainless steels); this means it is formulated to cope with the heat generation and ductility associated with such alloys. Using a grade matched to the workpiece material reduces the occurrence of adhesive wear and supports a steady metal-removal rate. In practical terms, this often translates to fewer tool changes, less operator intervention and a smoother production flow — factors that positively influence unit costs and delivery reliability. For stainless-steel turning tasks that demand repeatable performance, ask Metav Werkzeuge for application support or to obtain the TS22-IL4.0ISO WMP32G insert; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TS22-IL4.0ISO-WMP32G-WALTER Article designation: TS22-IL4.0ISO WMP32G Brand: Walter Tools Facts Grade family: Tiger·tec Gold Material group suitability: M (stainless steels) Chipbreaker: IL4.0ISO Special features Coated carbide grade WMP32G Optimised for stable chip formation Engineered for medium to robust cutting conditions Suitable for machining stainless steels FAQ Is this insert suitable for stainless steel turning? The TS22-IL4.0ISO WMP32G insert from Walter Tools is specified for ISO group M and is optimised for machining stainless steels under medium to robust conditions. What are the advantages of the Tiger·tec Gold grade? The Tiger·tec Gold technology in the WMP32G grade offers a balance of wear resistance and toughness, improving edge life and reducing the risk of built-up edge when turning stainless steels. How does the IL4.0ISO chipbreaker affect machining? The IL4.0ISO chipbreaker promotes short, controllable chips and more stable chip evacuation, which supports safer handling and steadier machining cycles. Can this insert be used for fine finishing passes? The WMP32G grade is primarily targeted at medium to robust cutting conditions; for very fine finishing operations, a different geometry or grade optimised for finishing should be considered. What type of tooling systems is this insert compatible with? The TS22-IL4.0ISO WMP32G is an indexable turning insert intended for standard turning toolholders designed to accept the specified insert designation; toolholder compatibility should be confirmed against the insert designation. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names remain the property of their respective owners and are mentioned here for explanation only; there is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer.
TS22-IL4.5ISO WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of durable cutting performance and reliable chip control to keep production stable and costs predictable; order the TS22-IL4.5ISO WMP32G insert through Metav Werkzeuge or consult our specialists for application-specific recommendations. TS22-IL4.5ISO WMP32G — Indexable turning insert for stainless steel, Tiger·tec Gold (Walter Tools) A TS22-IL4.5ISO WMP32G is an indexable turning insert optimised for machining stainless steels under medium to robust cutting conditions, offering a balance of wear resistance and secure chip formation Tiger·tec Gold coating, enhanced wear resistance WMP32G grade for stainless steel machining IL4.5ISO chipbreaker for reliable chip control Walter Tools quality for consistent tool life High wear resistance for demanding stainless-steel turning The combination of the WMP32G grade and Tiger·tec Gold coating provides a robust cutting edge that is particularly suited to the challenges of stainless steel: high toughness, tendency to form built-up edge and increased heat generation. The coated carbide substrate is designed to support a stable cutting edge and improved wear resistance, which in turn reduces unplanned tool changes and helps maintain consistent cycle times. The engineering behind the grade ensures that edge deterioration is slowed and edge strength is preserved under intermittent or heavier cuts, delivering reproducible results on complex components. Consistent chip control and improved surface quality The IL4.5ISO chipbreaker is engineered to promote predictable chip formation and evacuation when working with stainless materials. Controlled chip flow reduces friction and local heat at the cutting zone, which helps to avoid smearing and adhesion on the flank face; the result is an improved surface finish and fewer interruptions for chip clearing. This insert’s geometry is aimed at lowering cutting forces during critical passes, enabling steadier machining and a measurable uplift in process efficiency without compromising dimensional stability. Process security and economical production Built to Walter Tools’ standards, this indexable insert delivers process security and repeatable performance in serial production. Reduced tool-wear rates and reliable edge behaviour contribute to longer intervals between indexings, lowering tooling consumption and non-productive downtime. For operations seeking to standardise inserts for rostfreiem Stahl applications, the combination of grade and chipbreaker supports predictable tool-life and easier process qualification. If application parameters require adaptation, Metav Werkzeuge provides technical guidance to match insert choice with machine, clamping and workpiece conditions. For tailored advice on integrating the TS22-IL4.5ISO WMP32G insert into production and to request availability via Metav Werkzeuge, contact our technical team for guidance and part procurement. Technical Data Article number: TS22-IL4.5ISO-WMP32G-WALTER Designation: Indexable turning insert TS22-IL4.5ISO WMP32G (Walter Tools) Type: Indexable turning insert Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Grade: WMP32G Chipbreaker: IL4.5ISO Material group: M (stainless steel) Product designation: TS22-IL4.5ISO Special features Coating: Tiger·tec Gold (coated carbide) Sort description: WMP32G is a Walter-coated carbide grade for stainless steel Application: medium to robust turning operations on stainless steel ISO designation: TS22-IL4.5ISO WMP32G FAQ What materials is this insert intended for? The TS22-IL4.5ISO WMP32G insert is intended primarily for stainless steel (material group M) machining and is engineered for medium to robust cutting conditions. How does the IL4.5ISO chipbreaker affect machining? The IL4.5ISO chipbreaker promotes predictable chip formation and evacuation, improving chip control and contributing to better surface finish and reduced heat concentration at the cutting zone. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases wear resistance and prolongs edge life, supporting stable cutting performance and fewer tool interventions during serial production. Is this insert suitable for finishing and roughing passes? The WMP32G grade and the IL4.5ISO geometry are intended to perform reliably across a range of cutting depths; for specific finishing or roughing strategies, the TS22-IL4.5ISO WMP32G can be matched to cutting parameters to balance tool life and surface quality. Who should be contacted for application support or to confirm suitability? Metav Werkzeuge can provide application advice and further technical details to confirm that the TS22-IL4.5ISO WMP32G insert meets specific process requirements. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation and product identification. There is no affiliation between Metav Werkzeuge and the listed brands beyond the sale of original, factory-new goods of the respective manufacturer.
TS22-IL5.0ISO WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold performance, a dedicated IL5.0ISO chipbreaker, and a grade tuned for the demands of stainless steels to reduce tool changes and improve process stability; order directly via Metav Werkzeuge or consult our specialists for application advice. TS22‑IL5.0ISO WMP32G indexable turning insert — Walter Tools The TS22‑IL5.0ISO WMP32G is an indexable turning insert engineered for secure chip formation and long tool life when machining stainless steels under medium to robust conditions. Tiger‑tec Gold coating for extended tool life WMP32G grade optimised for stainless steels IL5.0ISO chipbreaker for reliable chip control Consistent cutting edge and repeatable performance Improve machining stability with a grade made for stainless steels The Tiger‑tec Gold WMP32G grade combines a coated carbide substrate with a microstructure optimised for the toughness and adhesion characteristics of stainless steels. This composition promotes stable chip formation and reduces the risk of build‑up on the cutting edge, which in turn supports longer intervals between indexings. The IL5.0ISO chipbreaker is designed to fragment and evacuate chips effectively in turning operations, improving surface consistency while lowering cycle interruptions. For manufacturing environments seeking reproducible results, these material and geometry choices deliver measurable gains in process reliability. Minimise rework and maximise productivity through controlled chip flow A well‑matched chipbreaker and cutting grade translate directly into fewer interruptions for manual chip clearing and inspection. The IL5.0ISO geometry promotes predictable chip shapes during roughing and semi‑finishing, helping to avoid entanglement and tool damage. When paired with the WMP32G coating technology, the insert sustains a stable cutting edge even under elevated temperatures typical for austenitic stainless steels. This leads to reduced scrap rates and improved first‑pass yield—an efficiency benefit that is particularly relevant for batch production and high‑mix turning applications. Practical handling benefits for the workshop and production line Indexable inserts such as this reduce downtime: a worn corner is replaced in seconds, restoring original geometry without regrinding. The combination of Tiger‑tec Gold surface treatment and the robust grade means fewer indexings and lower consumable spend over a production cycle. In addition, consistent edge behaviour simplifies tool path verification and quality control, easing operator training and integration into existing toolholding systems. Where stability is paramount, choosing an insert optimised for the substrate being machined pays off through predictable tool life and fewer unplanned interventions. Selection advice and integration into tooling systems When specifying tooling for turning operations on stainless steels, consider the cutting speed, feed and depth of cut together with the IL5.0ISO chipbreaker to maintain chip control across the intended process window. The grade WMP32G is suitable for medium to robust conditions; for fine finishing at lower thermal loads, complementary grades may be evaluated. For precise compatibility with holders and clamping systems, consult the toolholder manufacturer’s recommendations and reference the insert designation to ensure correct seat and clamp fit. Technical guidance is available to match the insert’s capabilities to specific machining strategies. Contact Metav Werkzeuge to discuss Walter Tools’ Tiger‑tec Gold turning inserts and find the best WMP32G solution for stainless‑steel turning — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: TS22-IL5.0ISO-WMP32G-WALTER Product: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Grade: WMP32G Series: Tiger‑tec Gold Core data Material group: M (stainless steels) Chipbreaker: IL5.0ISO Coated: yes Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Optimised for stable chip formation and reliable cutting edge FAQ What materials can this insert machine effectively? The TS22‑IL5.0ISO WMP32G insert from Walter Tools is optimised for stainless steels (ISO group M) and performs well in medium to robust turning conditions where stability and chip control are required. How does the IL5.0ISO chipbreaker benefit production? The IL5.0ISO geometry breaks and evacuates chips reliably, reducing interruptions and the risk of built‑up edge; when used with the WMP32G grade it supports consistent surface quality and fewer tool changes. Is the WMP32G grade coated and why does that matter? Yes—WMP32G is a coated carbide grade within the Tiger‑tec Gold family; the coating enhances wear resistance and helps maintain a sharp, stable cutting edge under thermal and adhesive stresses common with austenitic stainless steels. Can this insert be used for both roughing and finishing? The insert is designed for medium to robust applications; it is particularly suitable for roughing and semi‑finishing. For very fine finishing cuts, evaluation of complementary grades or adjustments to cutting parameters is recommended. How should toolholders be matched to this insert? Select toolholders that explicitly list compatibility with the TS22 insert geometry and ensure correct clamping and seat contact; correct holder selection preserves the insert’s intended cutting geometry and chip evacuation characteristics. Manufacturer: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation between our company and the trademark holders. The offered article is an original, factory‑new product from the manufacturer.
TS22-IR-N60 WMP22G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the IR‑N60 chipbreaker for reliable stainless steel turning and consistent edge life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TS22-IR-N60 WMP22G indexable turning insert — Tiger·tec Gold, suited for stainless steel — Walter Tools The TS22-IR-N60 WMP22G is an indexable turning insert engineered for machining stainless steel under medium to robust conditions, offering stable chip formation and an optimised cutting edge for demanding production environments. Tiger·tec Gold coated for extended life Optimised IR‑N60 chipbreaker for stable chips Suited for stainless steel machining Walter Tools quality and consistent edge life Increased process reliability when turning stainless steel The combination of a coated carbide substrate and the Tiger·tec Gold coating results in more consistent cutting performance when machining stainless steel, which is prone to work hardening and adhesive wear. The coating reduces friction and heat generation at the cutting zone, which supports a stable cutting edge and lowers the risk of built-up edge. For production managers this translates into fewer unplanned tool changes and more predictable cycle times. Technical terms: the coating is a multi-layer, wear-resistant finish applied to the carbide to improve thermal and mechanical performance. Durable edge stability that extends tool life A primary benefit of the insert’s design is edge robustness: the WMP22G grade maintains its geometry under elevated temperatures typical for machining rust‑resistant alloys. The result is extended tool life and fewer regrinds, which lowers per-part tooling cost and simplifies inventory. Because the grade is a coated hardmetal specifically developed for the M material group, it supports secure chip formation and resists the edge deterioration that commonly shortens service life in demanding turning operations. Controlled chip formation reduces interruptions The dedicated IR‑N60 chipbreaker is shaped to produce short, controllable chips when cutting ductile, heat-prone materials. Controlled chip flow minimises machine stoppages and manual chip clearing, which improves operator safety and uptime. In practice, this means cutting parameters can be set with confidence: the insert channels the chips away from the workpiece and tool path, reducing the likelihood of entanglement or surface damage during longer production runs. Integration into workshop workflows and application advice This insert is compatible with standard tool holders for indexable turning and is intended for shops that require dependable performance in stainless steel tasks. If additional technical data or cutting recommendations are required, Metav Werkzeuge provides application support and parameter suggestions based on component geometry and machine capability. For complex parts, a short trial under controlled conditions is recommended to validate feeds and speeds and to ensure the desired surface finish is achieved. For tailored recommendations on using the Walter Tools TS22-IR-N60 WMP22G insert in stainless steel turning operations, contact Metav Werkzeuge for application guidance – eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data SKU: TS22-IR-N60-WMP22G-WALTER Product: Drehwendeschneidplatte (indexable turning insert) Grade: WMP22G Series: Tiger·tec Gold Key figures Material group: M (stainless steel) Chipbreaker: IR‑N60 ISO designation: TS22-IR-N60 WMP22G Brand: Walter Tools Materials and features Coating: Tiger·tec Gold (coated carbide technology) Suitable for: stainless steel machining Sort description: coated hardmetal for medium to robust conditions Intended use: reliable chip formation and stable cutting edge FAQ What materials is this insert intended for? The TS22-IR-N60 WMP22G is intended primarily for stainless steel (material group M) and is formulated to manage the toughness and heat sensitivity of these alloys. How does the Tiger·tec Gold coating help in turning operations? The Tiger·tec Gold coating reduces friction and improves thermal resistance, which helps the WMP22G grade retain a stable cutting edge and extend tool life during continuous turning of rust‑resistant steels. What benefit does the IR‑N60 chipbreaker provide? The IR‑N60 chipbreaker produces short, controlled chips, reducing interruptions, improving safety and helping maintain a consistent surface finish on machined parts. Is the insert compatible with standard turning tool holders? Yes; the insert is an indexable turning insert designed to fit conventional tool holders that accept the TS22‑style ISO designation. Manufacturer: Walter Tools; Tübingen, Germany Trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the brands named. The offered item is original and brand new.
TS22-IR-N60 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating, the WMP32G grade and the IR‑N60 chipbreaker for stable chip control and extended tool life; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. TS22-IR-N60 WMP32G indexable turning insert — Tiger·tec Gold coating, for rostfreier Stahl | Walter Tools The TS22-IR-N60 WMP32G is an indexable turning insert designed for medium to robust machining of rostfreier Stahl, combining a coated carbide grade with a dedicated chipbreaker geometry for consistent metal removal. Tiger·tec Gold coated carbide grade WMP32G Optimised IR‑N60 chipbreaker for stable chips Designed for rostfreier Stahl machining Greater process reliability through optimised grade and geometry The combination of the WMP32G grade and the IR‑N60 chipbreaker delivers improved chip control and a stable cutting edge under demanding conditions. The insert is a coated carbide geometry that supports secure chip formation when machining rostfreier Stahl, a group of materials known for toughness and a tendency to form built-up edge. By promoting predictable chip flow and reducing adhesion at the cutting zone, the insert helps maintain consistent cycle times and lowers the need for rework. The construction and coating are tailored to moderate and heavy cutting strategies, enhancing operational stability in production environments. Coating benefits that extend tool life and surface quality The Tiger·tec Gold coating technology combines wear resistance and thermal stability to protect the cutting edge during prolonged operation. The coated hardmetal surface reduces flank wear and delays edge failure, which translates into longer intervals between index changes and fewer tool interventions. For machining rostfreier Stahl this means more repeatable part quality and improved surface finish, as the coating reduces the risk of adhesion and thermal loading. These material properties support a predictable tool life and contribute to efficient, cost-conscious production. Application advice and integration into the machining process The insert is intended for turning operations under medium to robust conditions and integrates into standard indexable toolholders for external turning. The IR‑N60 chipbreaker is devised to create short, controlled chips that evacuate reliably from the cut, reducing the risk of tangling and damage to workpiece surfaces. When implementing this grade in a process, consider machining parameters that balance chip formation and tool life; cooling and feeds should be set according to machine rigidity and part geometry. For specific cutting data and process optimisation, consult the technical team or refer to application sheets to match the insert to the exact rostfreier Stahl grade and part requirements. For tailored machining advice on Walter Tools Tiger·tec Gold inserts or to arrange procurement through Metav Werkzeuge, contact the Metav Werkzeuge specialists for precise recommendations and availability Technical data SKU: TS22-IR-N60-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-IR-N60 WMP32G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Grade: WMP32G Facts Material group: M Application: rostfreier Stahl Chipbreaker: IR‑N60 Series: Tiger‑tec Gold Special features Coating: Tiger·tec Gold Coated hardmetal (beschichtetes Hartmetall) Suitable for medium to robust cutting conditions Stable chip formation and improved edge life FAQ What materials is this insert intended for? The TS22-IR-N60 WMP32G insert is designed specifically for machining rostfreier Stahl and performs best on tough, adhesion-prone stainless materials. How does the IR‑N60 chipbreaker improve machining? The IR‑N60 chipbreaker on the TS22-IR-N60 WMP32G promotes controlled, short chips and reliable evacuation, reducing chip-related interruptions and protecting the workpiece surface. What advantages does the WMP32G grade offer? The WMP32G grade, paired with the Tiger·tec Gold coating, provides wear resistance and thermal stability that extend the useful life of the insert during sustained rostfreier Stahl turning. Is this insert suitable for heavy-duty turning operations? Yes, the insert is intended for medium to robust conditions and is engineered to maintain a stable cutting edge under heavier machining loads. Where can one obtain cutting data for this insert? Cutting data and parameter recommendations for the TS22-IR-N60 WMP32G are available from Metav Werkzeuge and Walter Tools application literature to ensure optimal integration into the machining process. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the trademark holders. The offered item is an original, new product from the named manufacturer.
TS22-IR05ACME WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WMP32G grade for consistent chip control and longer tool life; the IR05ACME chipbreaker stabilises cutting behaviour in stainless steels, reducing rework and downtime. Order the TS22-IR05ACME WMP32G insert directly via Metav Werkzeuge or consult the technical team for selection and process parameters. TS22-IR05ACME WMP32G indexable turning insert — IR05ACME chipbreaker, Tiger·tec Gold by Walter Tools TS22-IR05ACME WMP32G is an indexable turning insert engineered for machining stainless steels under medium to robust conditions, offering reliable chip control and extended tool life Tiger·tec Gold coating for long life Optimised for stainless steel (M) IR05ACME chipbreaker for stable chips Walter Tools design for high productivity Longer tool life through optimised coating and grade The combination of the Tiger·tec Gold technology with the WMP32G grade provides a coated carbide construction engineered for demanding work on stainless steels. The coated cutting edge resists wear and reduces the tendency to form built-up edge, which in turn maintains geometric stability of the tool and extends service intervals. This improvement in endurance translates directly into fewer tool changes and higher overall equipment effectiveness. The material designation M indicates suitability for tough, heat-generating stainless alloys; the insert’s composition supports secure chip formation and dependable cutting-edge behaviour even when thermal loads rise. Consistent chip control for improved surface quality The IR05ACME chipbreaker is designed to control chip formation for reliable evacuation and predictable cutting forces. Controlled chip flow reduces the risk of entanglement and surface defects, helping to secure a consistent finish on turned components. Stable chip breaking also diminishes unplanned stop-starts and scrap rates, supporting a smoother production flow. For operations where reproducible part quality and reduced post-process work are priorities, the insert’s chip control capability yields measurable productivity benefits and process reliability. Practical integration and application range As part of Walter Tools’ Tiger·tec Gold family, this insert is intended for medium to robust cutting conditions common in industrial turning of stainless steels. The design supports a wide range of turning tasks where toughness, thermal resistance and edge stability are required. Process planners will appreciate the predictable behaviour under varying cut depths and feeds, enabling clearer calculation of tool life and replacement intervals. If process optimisation or specific machining parameters are required, Metav Werkzeuge’s consultants can advise on suitable cutting data and tool holders to match shop-floor equipment. Contact Metav Werkzeuge for tailored application advice or to place an order for the TS22-IR05ACME WMP32G insert — technical guidance and fast processing are available Technical data Article number: TS22-IR05ACME-WMP32G-WALTER Product name: Drehwendeschneidplatte TS22-IR05ACME WMP32G Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR05ACME Material group: M (stainless steels) Manufacturer: Walter Tools Facts ISO designation: TS22-IR05ACME WMP32G Applicable material group: M Sort description: coated carbide grade Special features Coated carbide construction Engineered for stainless steels (M) IR05ACME chip control geometry Designed for medium to robust cutting conditions Part of the Tiger·tec Gold family FAQ What materials is this insert suitable for? The TS22-IR05ACME WMP32G insert is specified for machining stainless steels (ISO group M) and is formulated to manage the toughness and thermal demands associated with these alloys. How does the Tiger·tec Gold technology benefit tool life? Tiger·tec Gold provides a wear-resistant coating that supports edge stability and reduced built-up edge, which together extend the service life of the TS22-IR05ACME WMP32G insert under demanding turning conditions. What advantage does the IR05ACME chipbreaker provide? The IR05ACME chipbreaker promotes consistent chip formation and evacuation, improving surface finish and reducing the likelihood of chip-related interruptions during turning operations. Can this insert handle robust cutting parameters? Yes—this grade and chipbreaker combination is intended for medium to robust cutting conditions typical when machining stainless steels, delivering process stability and repeatable results. Is the TS22-IR05ACME WMP32G compatible with standard holders? The insert follows the ISO designation TS22-IR05ACME WMP32G and is compatible with corresponding indexable turning tool holders designed for that form and geometry Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Trademarks and trade names are the property of their respective owners. The mention of brand names is for explanatory purposes only and does not imply any affiliation with our company. The offered item is an original, factory-new product of the listed manufacturer.
TS22-IR05UN WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for consistently stable cutting when machining rostfreier Stahl; the insert delivers reliable chip control under medium to robust conditions and supports longer tool life. Order or request machining advice via Metav Werkzeuge for application-specific recommendations and cutting parameters. TS22-IR05UN WMP32G turning indexable insert – Tiger·tec Gold for rostfreier Stahl (Walter Tools) TS22-IR05UN WMP32G is an indexable turning insert designed for secure and productive machining of rostfreier Stahl using Walter Tools' Tiger·tec Gold technology. Tiger·tec Gold coating for extended tool life Designed for rostfreier Stahl machining Coated carbide substrate for wear resistance Stable chip control under medium to heavy cuts Consistent cutting with advanced coating for longer tool life The combination of the Tiger·tec Gold coating and the WMP32G cutting grade offers a clear process advantage when facing the challenges of machining rostfreier Stahl. The coating reduces friction at the cutting edge, which lowers heat generation and minimises the risk of built-up edge formation; this directly translates into improved tool life and more predictable regrinds. In practical terms, shops benefit from fewer tool changes and steadier cycle times, especially in serial production where repeatability and uptime matter most. The insert's coated carbide composition ensures a balance between toughness and hardness, supporting both edge stability and abrasion resistance. Secure chip control and surface quality for demanding stainless applications Equipped with the IR05UN chipbreaker, the insert promotes predictable chip formation and evacuation in conditions typical for rostfreier Stahl: high ductility, tendency to work-harden, and elevated cutting temperatures. The chip geometry reduces the likelihood of long, stringy chips and supports a cleaner machining environment, lowering secondary operations and manual chip handling. As a result, operators can expect consistent surface finishes and fewer interruptions from chip-related issues, improving overall throughput and quality assurance for turned components. Process reliability and application support for productive machining The material and design choices behind this insert focus on process security: a coated, wear-resistant grade for medium to robust cutting conditions that helps maintain a stable cutting edge under fluctuating loads. This leads to reduced rework and more consistent component tolerances in serial production. For shops transitioning to or optimising rostfreier Stahl processes, the insert offers a pragmatic solution that balances productivity with predictable tool life. Technical teams can derive cutting data from the insert’s grade and chipbreaker characteristics to adapt feeds and speeds, thereby achieving the desired trade-off between material removal rate and surface integrity. For tailored cutting data, availability and to discuss the best grade for specific rostfreier Stahl alloys, contact Metav Werkzeuge for expert advice on the Walter Tools TS22-IR05UN WMP32G insert and recommended machining parameters: info@metav-werkzeuge.com Technical Data Article number: TS22-IR05UN-WMP32G-WALTER SKU: TS22-IR05UN-WMP32G-WALTER Product type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR05UN Material group code: M Facts Material group: M (rostfreie Stähle) Application: rostfreier Stahl Coated carbide grade: yes Special features Tiger·tec Gold coating technology Designed for medium to robust cutting conditions Promotes stable chip formation and evacuation Coated carbide for improved wear resistance Suitable for serial and production turning operations FAQ What materials is this insert designed for? The TS22-IR05UN WMP32G insert is optimised for machining rostfreier Stahl and performs well under the high ductility and heat-generating conditions typical of these alloys. Which coating and grade does the insert use? The insert features Walter Tools’ Tiger·tec Gold technology in the WMP32G coated carbide grade, providing improved wear resistance and edge stability. What is the function of the IR05UN chipbreaker? The IR05UN chipbreaker ensures controlled chip formation and efficient evacuation during turning, reducing long chips and supporting consistent surface quality when cutting rostfreier Stahl. Is the insert suitable for heavy roughing operations? The design and grade support medium to robust cutting conditions; for heavy roughing, application-specific cutting data from Metav Werkzeuge will help determine optimal parameters. How to select the correct insert for a specific rostfreier Stahl alloy? Selection should consider alloy toughness, required surface finish and cycle time; the TS22-IR05UN WMP32G is a versatile choice, and Metav Werkzeuge can provide tailored recommendations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and Walter Tools. The offered article is original factory-new goods from the manufacturer.
TS22-IR05W WMP32G WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, IR05W chip control and reliable performance for demanding stainless steel turning operations; order the right insert directly via Metav Werkzeuge or consult our specialists for process optimisation. TS22-IR05W WMP32G – Indexable turning insert, Tiger·tec Gold, Walter Tools A TS22-IR05W WMP32G indexable turning insert engineered for medium to robust turning of stainless steels, combining a coated carbide grade with a dedicated chipbreaker for stable cutting. Tiger·tec Gold coating for wear resistance Optimised IR05W chipbreaker for stable chips Designed for stainless steels (ISO group M) Coated carbide grade WMP32G for reliable edge life Faster, more predictable machining thanks to coating and geometry The combination of the Tiger·tec Gold coating with a coated carbide substrate provides a measurable improvement in tool life and process stability under tougher conditions. The insert’s IR05W chipbreaker is configured to promote stable chip formation when machining austenitic and martensitic stainless steels, which typically tend to form long, stringy chips and generate heat. This results in fewer interruptions for chip clearing and less risk of built-up edge, so cycle times are reduced and machine availability is improved. The hardened and wear-resistant surface of the grade supports repeatable performance and consistent component quality. Confident turning of stainless steels with improved surface quality Stainless steels (ISO group M) present specific challenges: high toughness, work hardening and elevated cutting temperatures. The WMP32G grade in the Tiger·tec Gold family is formulated as a coated carbide to address those challenges by balancing edge stability and heat resistance. The result is a more robust cutting edge that resists chipping and enables a cleaner finish on turned parts. For production environments where consistent surface integrity and dimensional control are required, this insert offers a tangible benefit by reducing scrap rates and rework. Practical application guidance and process support Select this insert for external turning operations under medium to robust cutting regimes where stainless steels are the predominant material. The geometry and coating are optimised to maintain cutting-edge integrity over longer tool life, which supports uninterrupted production runs. For exact cutting data and optimal toolholder pairing, Metav Werkzeuge’s technical advisors can assist with cutting-speed recommendations and grade matching to process requirements. This combination of product design and expert support helps integrate the insert into existing workflows with minimal trial-and-error. For process-critical turning tasks, choose genuine Walter Tools Tiger·tec Gold inserts via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored recommendations and application support Technical Data Article number: TS22-IR05W-WMP32G-WALTER Label: Indexable turning insert TS22-IR05W WMP32G (Walter Tools) Type: Indexable turning insert Grade: WMP32G Series: Tiger·tec Gold Chipbreaker: IR05W Manufacturer: Walter Tools Facts No dimensional or thickness data provided Materials & Special features Coating technology: Tiger·tec Gold Carbide type: Coated cemented carbide Suitable for: stainless steels (ISO group M) Typical use: medium to robust cutting conditions Chip control: IR05W chipbreaker FAQ What materials is this insert suitable for? The TS22-IR05W WMP32G insert is intended primarily for stainless steels (ISO group M), where toughness and heat generation require a coated carbide grade and an effective chipbreaker. What does the grade WMP32G indicate? WMP32G denotes a Walter Tools coated carbide grade within the Tiger·tec Gold family, formulated for improved wear resistance and edge stability in demanding stainless steel turning. How does the IR05W chipbreaker improve the process? The IR05W chipbreaker is designed to produce short, controllable chips when turning tough stainless steels, reducing interruptions for chip evacuation and lowering the risk of built-up edge. Which applications benefit most from this insert? External turning operations under medium to robust cutting conditions—especially series production and components demanding consistent surface finish—will benefit from the WMP32G grade and the Tiger·tec Gold coating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and proprietary designations are used solely for explanation; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers.
TS22-IR06ACME WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold technology, a dedicated WMP32G grade and the IR06ACME chipbreaker for consistent stainless‑steel performance; order the insert directly via Metav Werkzeuge or consult our technical advisers for application guidance. TS22-IR06ACME WMP32G indexable turning insert — Tiger‑tec Gold, for stainless‑steel machining, Walter Tools The TS22-IR06ACME WMP32G is an indexable turning insert engineered for secure chip formation and edge stability when machining stainless steel under medium to robust conditions. Tiger‑tec Gold coating for edge stability Optimised chip control IR06ACME Suitable for stainless steel machining (M) Consistent performance under demanding stainless‑steel conditions The combination of the WMP32G grade with Tiger‑tec Gold coating delivers a reliable balance between wear resistance and toughness, which is essential when machining stainless steel. Coated carbide technology reduces adhesive wear and helps maintain a stable cutting edge, so the tool sustains cutting performance over extended cycles. This results in fewer interruptions, improved machine uptime and more consistent component quality in batch production. How the grade and coating translate into higher productivity The sintered grade and multilayer Tiger‑tec Gold treatment support controlled abrasion and thermal stability. That means the insert copes better with the heat and work‑hardening tendencies of stainless steel, allowing for sustained material removal rates without premature edge failure. The result is measurable productivity gains: more parts per shift and reduced frequency of insert changes, which lowers overall process cost and shortens lead times. Chip control and process stability explained The IR06ACME chipbreaker is designed to assist predictable chip formation when cutting tough alloys. By promoting short, manageable chips, the insert reduces the risk of surface damage and enhances swarf handling in automated turning operations. Stable chip behaviour contributes directly to repeatable surface finishes and a safer shopfloor environment, particularly during higher‑feed or interrupted‑cut scenarios. Practical applications and workshop advantages Ideal for operations that require dependable performance on ferritic and austenitic stainless steels, this insert suits component turning where dimensional consistency and surface integrity are priorities. The insert’s balanced properties support a wide range of turning tasks under medium to robust cutting conditions, making it a practical choice for job shops and production lines aiming for steady process results rather than experimental optimisation. For reliable stainless‑steel turning with Tiger‑tec Gold, choose the TS22-IR06ACME WMP32G from Walter Tools via Metav Werkzeuge or contact our technical team at Metav Werkzeuge for tailored application advice Technical data Article number: TS22-IR06ACME-WMP32G-WALTER Product label: Drehwendeschneidplatte TS22-IR06ACME WMP32G Walter Tools Product type: Drehwendeschneidplatte Facts Grade: WMP32G Coating technology: Tiger‑tec Gold Chipbreaker: IR06ACME Material group: M (rostfreie Stähle) SKU / UID: TS22-IR06ACME-WMP32G-WALTER Special features Coated carbide grade for balanced wear resistance Optimised chip control for stainless‑steel turning Designed for medium to robust machining conditions Walter Tools quality and series: Tiger‑tec Gold Suitable application: rostfreier Stahl FAQ Which materials is this insert suited for? The TS22-IR06ACME WMP32G by Walter Tools is specified for stainless steel (material group M) and is designed to handle the toughness and heat generation typical of those alloys. What coating and grade does the insert use? This insert uses Tiger‑tec Gold coating and the WMP32G grade, a coated carbide formulation optimised for secure chip formation and good edge life on stainless steels. What are the benefits of the IR06ACME chipbreaker? The IR06ACME chipbreaker promotes controlled, short chips and consistent swarf behaviour, improving process stability and surface finish in turning operations with stainless steel. For which machining conditions is this insert recommended? The TS22-IR06ACME WMP32G is intended for medium to robust cutting conditions where reliable edge stability and predictable chip control are required for repeatable production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for clarification and technical reference. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
TS22-IR06UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP32G carbide grade with the IR06UN chipbreaker for reliable machining of stainless steel; the result is stable chip control, extended edge life and consistent process security. Order the TS22-IR06UN WMP32G turning indexable insert via Metav Werkzeuge or consult our specialists for application-specific advice. TS22-IR06UN WMP32G turning indexable insert for stainless steel — Walter Tools, Tiger·tec Gold A TS22-IR06UN WMP32G turning indexable insert engineered to provide stable cutting performance and predictable tool life in medium to robust machining of stainless steel. Tiger·tec Gold coating for extended tool life Optimised IR06UN chipbreaker for stable chips Suitable for stainless steel (ISO group M) Walter Tools grade WMP32G for consistent performance Precise performance where chip control matters The insert is built around the IR06UN chipbreaker and the Tiger·tec Gold coating to deliver predictable results when machining stainless steel, a material group known for toughness, built-up edge tendency and high heat generation. By combining a purpose-designed chip geometry with a coated carbide WMP32G grade, the system promotes secure chip formation and reduced edge wear. This leads to fewer interruptions, longer uninterrupted cutting times and a measurable increase in process efficiency on turned components. Improved economy through longer edge life and repeatability Using a coated hardmetal grade designed for medium to robust conditions ensures that cutting edges retain their form longer, which lowers the frequency of index changes and reduces tool inventory turnover. The insert’s construction supports reproducible cutting behaviour across batches, which simplifies process planning and reduces scrap rates. In practical terms, shops can expect more consistent surface finish and dimensional stability when the machining strategy is aligned with the insert’s strengths in handling work-hardened zones and thermal load typical of stainless steel. Ease of selection and application guidance The ISO designation and clearly defined features make the insert straightforward to specify for production and maintenance planning. The combination of WMP32G grade and IR06UN chip control is suited to operations where medium to heavy interrupted cuts or mixed-production runs require a robust, reliable solution. For teams seeking setup support or cutting data, technical consultation helps match the insert to the chosen toolholder and machining parameters to unlock the full potential of the grade and coating. Contact Metav Werkzeuge today to specify the TS22-IR06UN WMP32G turning indexable insert for stainless steel applications and receive tailored recommendations and availability from our specialists Technical Data Article number: TS22-IR06UN-WMP32G-WALTER SKU: TS22-IR06UN-WMP32G-WALTER Product type: Drehwendeschneidplatte / turning indexable insert ISO designation: TS22-IR06UN WMP32G Facts Material group: M (stainless steel) Coating: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR06UN Special features Designed for stainless steel machining Coated hardmetal (beschichtetes Hartmetall) Series: Tiger-tec Gold Manufacturer: Walter Tools FAQ What materials is this insert best suited for? The TS22-IR06UN WMP32G turning indexable insert is primarily intended for stainless steel (ISO group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade improves thermal resistance and reduces flank wear, which extends the insert’s effective life and supports consistent surface quality during extended cuts. Which chip behaviour can be expected with the IR06UN breaker? The IR06UN chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and helping to maintain steady cutting forces when turning stainless steel. Is this insert suitable for high-speed applications? The insert’s coated grade and geometry are optimised for stable cutting; specific high-speed suitability depends on the machine, clamping and coolant strategy—Metav Werkzeuge can advise on parameter selection. Can the insert be used for interrupted cuts? Yes, the robust WMP32G grade and the chipbreaker design make the insert appropriate for interrupted or mixed-production turning operations in stainless steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation and comparative purposes only. The offered item is an original, factory-new product of the manufacturer Walter Tools. There is no affiliation between our company and the trademark owners.
TS22-IR06W WMP32G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WMP32G grade for reliable machining of stainless steels; this insert delivers stable chip control and extended tool life under medium to robust cutting conditions. Order directly via Metav Werkzeuge or consult our technical team for application support. TS22-IR06W WMP32G — turning indexable insert for stainless steels by Walter Tools TS22-IR06W WMP32G is a turning indexable insert engineered for secure chip formation and consistent performance when machining stainless steels under medium to robust conditions Tiger·tec Gold coating for extended tool life WMP32G grade optimised for stainless steels IR06W chipbreaker for controlled chip formation Stable cutting edge for medium to robust cuts Reliable machining of stainless steels with reduced risk of build-up The TS22-IR06W WMP32G insert is designed specifically for the challenges posed by stainless steels (ISO group M). These alloys tend to be ductile and generate heat, which encourages work-hardening and built-up edge; the WMP32G grade, a coated carbide, is formulated to resist flank wear while promoting a predictable wear pattern. As a result, the insert offers consistent cutting performance, reduced rework and fewer unscheduled tool changes, which supports steady production throughput and planning. Coating and chipbreaker that keep productivity high The combination of the Tiger·tec Gold coating technology and the IR06W chipbreaker focuses on two production-critical benefits: extended tool life and stable chips. The coating improves surface hardness and thermal resistance, slowing wear at elevated cutting temperatures, while the chipbreaker geometry encourages short, controllable chips in typical stainless-steel operations. This reduces machine downtime for chip clearing, improves surface finish, and helps to lower total machining costs through longer intervals between tool changes. Process security and integration for repeatable results As an indexable insert with the TS22 geometry, this item integrates into standard turning toolholders and supports reproducible set-ups across batches. The insert is suitable for medium to robust cutting strategies where stable cutting edges and reliable chip control are prioritised. For production environments seeking predictable component quality and reduced variation, the design reduces the need for frequent parameter adjustments. Application advice and cutting-parameter optimisation are available from Metav Werkzeuge to ensure the insert performs as intended in the specific machining context. For specialist machining of stainless steels, request Walter Tools' TS22-IR06W WMP32G via Metav Werkzeuge GmbH — application support and cutting-parameter consultation available by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: TS22-IR06W-WMP32G-WALTER Product: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR06W Core data Material group: M (stainless steels, ISO 513) Coating: coated carbide Typical application: medium to robust cutting conditions Special features Tiger·tec Gold coating technology Stable chip control with IR06W chipbreaker Optimised grade WMP32G for stainless steels Designation: TS22-IR06W WMP32G FAQ Which materials is this insert suitable for? This insert is specified for stainless steels (ISO group M) and is formulated to handle the toughness and heat characteristics typical of those alloys. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WMP32G grade increases thermal and wear resistance, extending tool life and improving process stability in demanding stainless-steel turning. What does the IR06W chipbreaker achieve? The IR06W chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and helping to maintain a consistent surface finish during production. How is the insert designated and where does it fit? Designated TS22-IR06W WMP32G, the insert is an indexable turning insert intended for toolholders compatible with the TS22 insert geometry and is supplied as an original Walter Tools grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of Walter Tools.
TS22-IR07UN WMP32G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WMP32G grade and the IR07UN chipbreaker for consistent, productive machining of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our technical advisors for process optimisation. TS22-IR07UN WMP32G Tiger‑tec Gold indexable turning insert – Walter Tools, IR07UN chipbreaker for rostfreier Stahl The TS22-IR07UN WMP32G is an indexable turning insert engineered for reliable performance when machining rostfreier Stahl under medium to robust cutting conditions Tiger‑tec Gold coating for reliable edge stability WMP32G grade for rostfreier Stahl machining IR07UN chipbreaker for controlled chip formation Walter Tools quality for consistent performance Longer tool life through proven coating technology The combination of the Tiger‑tec Gold coating with a coated carbide substrate delivers improved edge stability and reduced flank wear compared with uncoated grades. This engineered surface layer reduces friction and supports a predictable wear pattern, which translates directly into longer in‑service life and fewer indexings in series production. For operations where consistent cycle times and low variance are essential, the insert contributes to enhanced throughput and lower overall tooling expenditure. Safer chip control and surface quality on rostfreier Stahl The IR07UN chipbreaker is designed to produce short, controllable chips when turning tough materials. Because rostfreier Stahl tends to be ductile and to form long, stringy chips, a dedicated chip control geometry improves process security and reduces the risk of built‑up edge. Improved chip formation also supports a better surface finish and minimizes secondary operations. The constructive chip control reduces manual intervention at the machine, helping to maintain steady productivity. Practical integration and application guidance for workshops As an indexable turning solution from Walter Tools, the insert is suitable for common tool holders that accept the TS22 family geometry and benefits from clear grade assignment for rostfreier Stahl applications. When selecting cutting data, favour moderate cutting speeds with adequate coolant or proper heat management to exploit the WMP32G grade’s strength. If further clarification on mounting, recommended feeds or compatible holders is needed, the product documentation and technical advisors are available to support process adaptation and trial planning. Contact Metav Werkzeuge for tailored machining advice and to request TS22-IR07UN WMP32G inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TS22-IR07UN-WMP32G-WALTER Product type: Indexable turning insert (Drehwendeschneidplatte) Brand: Walter Tools Series: Tiger‑tec Gold Grade: WMP32G Chipbreaker: IR07UN Application: rostfreier Stahl (ISO group M) Facts ISO designation: TS22-IR07UN WMP32G Material group: M (rostfreier Stahl) Coating technology: Tiger‑tec Gold Special features Coated carbide grade Optimised chip formation for rostfreier Stahl Designed for medium to robust cutting conditions Part of the Tiger‑tec Gold series by Walter Tools FAQ What materials is this insert best suited for? The TS22-IR07UN WMP32G insert is optimised for rostfreier Stahl (ISO group M), where the WMP32G grade supports stable chip formation and wear behaviour. How does the IR07UN chipbreaker affect chip control? The IR07UN geometry promotes short, controllable chips in ductile materials, improving process security and reducing the likelihood of built‑up edge when turning rostfreier Stahl. Can this insert be used in high‑speed applications? The Tiger‑tec Gold coating enhances thermal resistance and friction behaviour, but cutting parameters should be adapted to material and machine capability to avoid premature wear. How is the insert indexed and what tool holders are compatible? The insert follows the TS22 family geometry and fits holders designed for that ISO designation; check the holder specification for compatibility with TS22‑type inserts. What performance benefits can be expected in serial production? Using the WMP32G grade and Tiger‑tec Gold technology typically results in extended tool life, consistent surface quality and fewer unplanned stoppages due to improved edge stability. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered article is original, factory‑new goods of the stated manufacturer.
TS22-IR07W WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of a high-performance cutting grade combined with Tiger·tec Gold coating for longer tool life and consistent chip formation in stainless steel. Order the insert via Metav Werkzeuge or consult our specialists for process-specific recommendations. TS22-IR07W WMP32G indexable turning insert – Tiger·tec Gold for stainless steel (Walter Tools) The TS22-IR07W WMP32G is an indexable turning insert engineered for reliable, repeatable machining of stainless steel in medium to robust cutting conditions. Tiger·tec Gold coating for enhanced wear resistance Optimised for machining stainless steel (ISO M) Coated carbide grade WMP32G for stable cutting edges Reliable chip control in medium to robust conditions Improved edge life and consistent performance for stainless steel The coated carbide grade WMP32G, combined with Tiger·tec Gold technology, delivers improved edge stability and wear resistance during extended machining cycles. This combination reduces flank wear and the frequency of tool changes, which supports steady production and lower unit costs. Designed specifically for ISO M materials, the insert provides controlled thermal behaviour and helps avoid typical issues when cutting stainless steel, such as material adhesion and rapid heat build-up. The result is reliably reproducible component quality and longer service intervals for toolholders and inserts. Predictable chip formation and better surface finish in one solution The IR07W chipbreaker is shaped to promote chip control and prevent stringing under medium to robust conditions, which simplifies swarf management and reduces interruptions at the machine. By encouraging regular chip segmentation and stable evacuation, the insert helps maintain consistent contact conditions at the cutting zone and thus supports improved surface quality on the workpiece. For engineers and shop managers seeking predictable process windows, the geometry reduces the risk of built-up edge on stainless steel and facilitates unattended or longer cycle times with reliable part finish. Process security and economical throughput for demanding turning operations Adopting this insert supports a more productive turning process: fewer tool changes, consistent edge behaviour and predictable performance translate into better machine utilisation and lower overall production costs. The solution is particularly suited to operations where robustness matters—interrupted cuts, mixed batch sizes or variable material lots. Backed by Walter Tools’ experience in precision tooling, the insert aligns with workflows that prioritise repeatability, high first-pass yield and straightforward grade selection, making it a practical choice for manufacturing environments focused on steady, measurable improvements. For process-critical stainless steel turning, contact Metav Werkzeuge to discuss how this Tiger·tec Gold solution fits specific machines and cutting parameters – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: TS22-IR07W-WMP32G-WALTER Article designation: TS22-IR07W WMP32G Product type: indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Material group: M (stainless steel) Grade: WMP32G Chipbreaker: IR07W Series: Tiger·tec Gold Special features Coating technology: Tiger·tec Gold Substrate: coated carbide Application: medium to robust turning of stainless steel Benefit: stabilised chip formation and enhanced wear resistance FAQ Which materials is this insert intended for? The TS22-IR07W WMP32G insert is intended primarily for stainless steel (ISO M), offering stable cutting behaviour where toughness and heat generation are typical. How does the IR07W chipbreaker improve machining? The IR07W chipbreaker on the TS22-IR07W WMP32G promotes predictable chip segmentation and evacuation, reducing stringing and improving surface finish in medium to robust conditions. What performance advantage does Tiger·tec Gold provide? Tiger·tec Gold coating enhances wear resistance and thermal stability, so the insert maintains cutting edge integrity for longer when machining stainless steel. Is this grade suitable for interrupted cuts or variable conditions? Yes, the coated carbide construction and robust geometry of the WMP32G grade support interrupted cuts and fluctuating process forces while maintaining reliable edge life. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names (Walter Tools) serves explanatory purposes only and does not imply affiliation or endorsement. The offered article is original and factory-new from the stated manufacturer.
TS22-IR1.5ISO-3 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the IR1.5ISO‑3 chipbreaker to secure consistent chip formation and extended tool life in rostfreier Stahl turning applications — order directly via Metav Werkzeuge or ask our consultants for application support. TS22-IR1.5ISO-3 WMP32G — Tiger‑tec Gold coated indexable turning insert for rostfreier Stahl (Walter Tools) The TS22-IR1.5ISO-3 WMP32G is a Tiger‑tec Gold coated indexable turning insert engineered for secure chip control and robust performance when machining rostfreier Stahl. Tiger‑tec Gold coated carbide grade WMP32G Optimised IR1.5ISO‑3 chipbreaker for rostfreier Stahl Stable cutting edge for medium to robust conditions Walter Tools quality for consistent tool life Improved process stability through optimised chip control The Tiger‑tec Gold grade WMP32G combines a coated carbide substrate with an anti‑wear top layer that supports stable chip formation when machining rostfreier Stahl. The IR1.5ISO‑3 chipbreaker is designed to break and evacuate chips reliably under the heat‑generating conditions typical of these alloys, reducing the risk of built‑up edge and interrupted cuts. This results in fewer tool changes and a more continuous production flow, which benefits throughput and overall process reliability. Longer tool life and reproducible edge behaviour Thanks to the coating technology and the WMP32G substrate, the insert offers improved wear resistance and a stable cutting edge under medium to robust operating conditions. The combination of a hard, wear‑resistant coating and a mechanically tough carbide core helps resist micro‑chipping and abrasive wear, leading to a longer effective life per insert and more predictable re‑grind or replace intervals. Such reproducibility supports planning and reduces unplanned downtime on the shop floor. Practical advantages for shops with varied rostfreier Stahl parts For production environments that handle a range of rostfreier Stahl grades, this insert provides a balance between toughness and wear resistance that supports consistent surface finish and dimensional control. The IR1.5ISO‑3 geometry eases chip evacuation in common turning operations, while the Tiger‑tec Gold coating helps maintain edge integrity under fluctuating cut parameters. The outcome is improved first‑pass yield and reduced secondary operations. Clear specification and straightforward integration into tooling systems Specification is concise and application‑oriented: the insert is a TS22 series geometry with the IR1.5ISO‑3 chipbreaker in the WMP32G grade, intended for rostfreier Stahl. For teams less familiar with chipbreaker terminology: a chipbreaker is a shaped feature on the insert face that controls how chips curl and break, directly affecting safety, surface quality and tool life. Integrating this insert into existing toolholders is typically straightforward, enabling rapid optimisation of turning processes without complex retooling. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts and to discuss batch availability and cutting parameter recommendations Technical data Article number: TS22-IR1.5ISO-3-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-IR1.5ISO-3 WMP32G Walter Tools Facts Material group: M Applicable material: rostfreier Stahl Special features Grade: WMP32G (Tiger‑tec Gold coating) Chipbreaker: IR1.5ISO-3 Series: Tiger‑tec Gold Brand: Walter Tools FAQ What materials is this insert designed for? The TS22-IR1.5ISO-3 WMP32G is specified for machining rostfreier Stahl and is optimised for medium to robust cutting conditions. How does the IR1.5ISO‑3 chipbreaker affect performance? The IR1.5ISO‑3 chipbreaker controls chip curling and breakage to improve evacuation and reduce the likelihood of built‑up edge when turning rostfreier Stahl with the WMP32G grade. Is the WMP32G grade suitable for high temperatures? WMP32G, as a Tiger‑tec Gold coated grade, offers enhanced wear resistance under increased cutting temperatures typical for rostfreier Stahl, supporting longer tool life. Can this insert be used in light finishing passes? Yes; while the insert is capable under robust conditions, its geometry and coating also permit stable finishing operations when set to appropriate feeds and speeds. What distinguishes Tiger‑tec Gold from standard coatings? Tiger‑tec Gold combines a wear‑resistant topcoat with a tough carbide substrate to balance edge strength and abrasion resistance, delivering consistent performance in rostfreier Stahl turning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are used only for explanatory purposes and do not indicate any affiliation between our company and the named manufacturers. The article offered is an original, factory‑new item of the manufacturer.
TS22-IR11.5NPT-2 WMP32G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WMP32G grade together with the IR11.5NPT-2 chipbreaker to secure consistent chip control and prolonged tool life when machining rostfreien Stahl; the result is a more stable process and fewer interruptions. Order the TS22-IR11.5NPT-2 WMP32G insert directly via Metav Werkzeuge or consult their technical advisors for optimised cutting data. TS22-IR11.5NPT-2 WMP32G — Turning indexable insert, Tiger·tec Gold, Walter Tools A TS22-IR11.5NPT-2 WMP32G turning insert designed for productive machining of rostfreien Stahl under medium to robust conditions, combining a coated carbide grade with a dedicated chipbreaker for reliable material removal. Tiger·tec Gold coating for enhanced wear resistance WMP32G grade optimised for rostfreien Stahl IR11.5NPT-2 chipbreaker for controlled chip formation Stable cutting edge for consistent surface quality Increase throughput with reliable wear protection The combination of the Tiger·tec Gold coating and the WMP32G carbide grade provides notable wear resistance, reducing flank and crater wear during turning operations on rostfreien Stahl. Coated carbides like this one form a thermal and chemical barrier that lowers adhesive tendencies and delays edge breakdown; the practical effect is longer tool life and fewer index changes, which supports uninterrupted production cycles and a better return on tooling investment. Achieve predictable chip control and improved finish The IR11.5NPT-2 chipbreaker is engineered to shape chips consistently during cutting, which minimises entanglement and heat concentration. Controlled chips reduce the risk of built-up edge — a common issue with rostfreien Stahl — and contribute directly to improved surface quality and dimensional stability. Compliance with the ISO 513 material group for M-grade applications ensures the geometry and grade are suited to the specific demands of stainless applications, increasing process security in routine and demanding cuts. Simplified selection and integration into machining processes This turning insert fits standard toolholders that accept the TS22-style designation and is intended to be straightforward to specify into existing tool lists. The coated carbide construction and dedicated chip control mean index changes are less frequent, lowering handling time and machine downtime. For operators seeking concrete cutting parameters or confirmation of compatibility with a specific holder or machine, Metav Werkzeuge’s technical advisors can provide tailored cutting data and recommendations to match feed, speed and depth of cut with workshop conditions. Contact Metav Werkzeuge for tailored cutting data and supply options for Walter Tools turning inserts to ensure optimal performance in rostfreien Stahl machining. Technical data Article number: TS22-IR11.5NPT-2-WMP32G-WALTER Label: Drehwendeschneidplatte TS22-IR11.5NPT-2 WMP32G Walter Tools Series: Tiger·tec Gold Grade: WMP32G Chipbreaker: IR11.5NPT-2 Material group: M Facts Suitable material group: M (rostfreie Stähle) Application: Turning Sort description: Coated carbide Typical conditions: Medium to robust machining Special features Coating: Tiger·tec Gold Optimised for: rostfreien Stahl Benefits: Stable cutting edge, improved chip control Manufacturer: Walter Tools FAQ What materials is this insert designed for? This insert is formulated for rostfreien Stahl applications; the WMP32G grade supports the toughness and heat characteristics of stainless alloys. How does the IR11.5NPT-2 chipbreaker affect machining performance? The IR11.5NPT-2 chipbreaker promotes consistent chip control, reducing built-up edge and improving surface finish when cutting rostfreien Stahl with the TS22-IR11.5NPT-2 WMP32G insert. Is the WMP32G grade suitable for heavy interrupted cuts? WMP32G is intended for medium to robust conditions and offers a balance of wear resistance and edge stability that performs well under more demanding engagements. Can the insert be used in standard TS22 toolholders? Yes, the TS22 designation indicates compatibility with toolholders designed for that insert shape and clamping style. Where can one obtain cutting data for this insert? Metav Werkzeuge provides cutting data and application advice; their technical advisors can supply parameters matched to machine and component requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
TS22-IR11W-2 WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated IR11W-2 chipbreaker and the WMP32G grade for dependable machining of stainless steel; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. TS22-IR11W-2 WMP32G — Indexable turning insert for stainless steel, Walter Tools TS22-IR11W-2 WMP32G is an indexable turning insert designed for medium to robust machining of stainless steel, offering a balanced mix of wear resistance and stable chip formation in demanding turning operations Tiger·tec Gold coated for superior wear resistance WMP32G grade for reliable stainless steel machining IR11W-2 chipbreaker for stable chip control Consistent cutting edge and extended tool life Increased process reliability in stainless steel turning The combination of the Tiger·tec Gold coating and the WMP32G grade provides a robust, coated carbide solution tailored to the challenges of stainless steel, which tends to be tough and generates heat. The result is improved tool life and reproducible results: the coating reduces abrasive and adhesive wear while the substrate maintains edge strength. These characteristics translate directly into fewer tool changes and more predictable cycle times, helping to secure production targets and reduce unplanned downtime. Controlled chips and safer machining thanks to IR11W-2 The built-in IR11W-2 chipbreaker is engineered to produce short, controllable chips when cutting stainless steel, reducing the risk of entanglement and minimising surface damage on workpieces. Stable chip formation supports consistent cutting forces and helps maintain a reliable cutting edge over multiple indexings. Explaining the chipbreaker function in simple terms: it directs and segments the swarf so that evacuation is predictable, which in turn supports higher feed rates and safer automated processes. Coating and grade deliver measurable economy The coated WMP32G grade is optimised for a wide range of stainless steel conditions encountered in workshops and production lines. The coating improves thermal and chemical resistance at the cutting zone, which reduces notch wear and built-up edge formation. For operations, this means fewer interventions, lower tooling cost per part and more stable surface quality—benefits that contribute to a favourable cost-per-component calculation over the life of the tool. Practical recommendations for integration and use For best results with this insert, pair it with tooling and parameters suited to stainless steel: moderate cutting speeds, increased feed to avoid rubbing, and a steady coolant strategy where applicable. The insert’s features lend themselves to both job-shop and volume production environments that require consistent performance. If additional data or cutting parameter guidance is required, Metav Werkzeuge provides application support and cutting charts to assist in process setup; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Contact Metav Werkzeuge today for bespoke recommendations on Walter Tools Tiger·tec Gold inserts and to ensure the correct TS22-IR11W-2 WMP32G configuration for stainless steel applications Technical data SKU: TS22-IR11W-2-WMP32G-WALTER Product: Drehwendeschneidplatte / indexable turning insert Label: Drehwendeschneidplatte TS22-IR11W-2 WMP32G Walter Tools Facts Material group: M (rostfreie Stähle) Series: Tiger·tec Gold Grade: WMP32G Special features Chipbreaker: IR11W-2 Application: stainless steel Manufacturer: Walter Tools FAQ What materials is this insert suited for? The TS22-IR11W-2 WMP32G insert is specified for stainless steel and is optimised for the toughness and thermal behaviour typical of these alloys. How does the IR11W-2 chipbreaker improve performance? The IR11W-2 chipbreaker on the TS22-IR11W-2 WMP32G creates short, controlled chips that ease evacuation and support a stable cutting edge during continuous turning operations. What are the main benefits of the Tiger·tec Gold coating? Tiger·tec Gold on the WMP32G grade reduces abrasive and adhesive wear, improving edge stability and extending tool life in demanding stainless steel machining. Can this insert be used in automated turning centres? Yes. The combination of consistent chip control and wear-resistant coating makes the TS22-IR11W-2 WMP32G suitable for automated environments where predictable chip behaviour and repeatability are essential. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TS22-IR12UN-2 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Gold performance and the WMP32G grade for consistent chip control and extended edge life in rostfreier Stahl turning applications; order directly via Metav Werkzeuge or consult our specialists for process parameters and availability. TS22-IR12UN-2 WMP32G indexable turning insert — Tiger‑tec Gold coating for rostfreier Stahl | Walter Tools A TS22-IR12UN-2 WMP32G indexable turning insert engineered for stable chip formation and reliable performance in medium to robust rostfreier Stahl machining. Tiger‑tec Gold coating for long life Optimised for rostfreier Stahl (M) IR12UN-2 chipbreaker for stable chips Coated carbide grade WMP32G Consistent performance for rostfreier Stahl machining The combination of the WMP32G grade and the Tiger‑tec Gold coating provides predictable behaviour when machining rostfreier Stahl, a material group prone to work hardening and built‑up edge. The coated carbide substrate supports a secure cutting edge under increased heat and friction, while the IR12UN-2 chipbreaker geometry promotes controlled chip segmentation. This results in fewer interruptions for chip removal and a reduction in unplanned tool changes, which contributes to a steady production flow and improved component quality. Improved process security and productivity Designed for medium to robust cutting conditions, the insert delivers a balance of wear resistance and toughness that supports longer tool life and stable cutting forces. A stable edge reduces the risk of sudden flank wear and maintains surface finish consistency, which in turn lowers scrap rates. The technical design emphasises measurable benefits: more consistent cycle times and enhanced process security during serial production, making the grade suitable for demanding turning tasks on rostfreier Stahl. Practical guidance for integration into tooling systems The TS22‑IR12UN‑2 geometry is compatible with common indexable turning toolholders that accept this insert designation. When integrating the insert, consider a cutting strategy that supports chip evacuation and avoids excessive feeds that can increase temperature. Use appropriate coolant and clamping torque for best repeatability. For customers who require specific cutting data or adapter matching, technical consultation is available to define the optimum combination of insert grade, toolholder and operating parameters to achieve the desired productivity gains. For application advice on Walter Tools' Tiger‑tec Gold WMP32G inserts and ordering through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised recommendations and availability Technical data SKU: TS22-IR12UN-2-WMP32G-WALTER Product type: indexable turning insert Designation: TS22-IR12UN-2 WMP32G Manufacturer: Walter Tools Facts Material group: M (rostfreie Stähle) Grade: WMP32G Coating technology: Tiger‑tec Gold Special features Chipbreaker: IR12UN-2 Substrate: coated carbide Application focus: rostfreier Stahl Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The TS22-IR12UN-2 WMP32G insert is optimised for rostfreier Stahl (material group M) and performs well under medium to robust cutting conditions. What does WMP32G mean in practice? WMP32G denotes Walter Tools' coated carbide grade within the Tiger‑tec Gold family, designed to combine wear resistance and toughness for reliable performance on rostfreier Stahl. How does the IR12UN-2 chipbreaker affect machining? The IR12UN-2 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of long, tangled chips and helping to maintain a stable cutting process. Is this insert suitable for interrupted cuts? The insert's coated carbide composition and robust design support a range of cutting conditions; for specific interrupted‑cut applications, consult process parameters to ensure optimal tool life. Can this insert be used in standard toolholders? The TS22‑IR12UN-2 geometry is compatible with toolholders designed for this insert designation; ensure correct seating and clamping for repeatable results. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any association with our company. The offered article is an original, factory‑new product from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS22-IR12UN-3 WMP32G WMP32G Wendeplatten - Walter Tools
High-performance coated carbide insert with Tiger·tec Gold and the IR12UN-3 chipbreaker for stable chip control in stainless steel turning; benefits include reliable edge security and consistent surface finish. Order directly via Metav Werkzeuge or contact our consultants for application-specific advice. TS22-IR12UN-3 WMP32G turning insert for stainless steel machining — Walter Tools A Walter Tools TS22-IR12UN-3 WMP32G indexable turning insert engineered for safe chip formation and dependable performance when machining stainless steels under medium to robust cutting conditions. Tiger·tec Gold coated carbide for long tool life WMP32G grade for stainless steel machining IR12UN-3 chipbreaker for stable chip formation Consistent edge security under medium to robust loads Greater process reliability for stainless steel turning The combination of the Tiger·tec Gold coating and the WMP32G grade targets the typical challenges of machining stainless steel: high ductility, tendency to form built-up edge and elevated heat generation. The coating, which is a multilayer PVD/CVD-style technology, reduces adhesion and flank wear while enhancing thermal resistance; as a result, edge security is improved and interruptions due to edge degradation are reduced. This leads to more predictable cycle times and fewer unplanned tool changes, which supports continuous, economic production. Durable cutting performance from coated carbide technology A coated hardmetal substrate forms the basis of this indexable insert, providing a robust cutting edge that is resistant to chipping under moderate to heavy engagement. The surface treatment, designed for repetitive and demanding applications, stabilises the micro-geometry of the cutting edge and improves wear resistance. When feed rates and depths of cut fluctuate in batch or one-off production, the coated substrate maintains tolerable wear progression, which preserves dimensional repeatability and reduces scrap rates in serial turning operations. Controlled chips and improved surface quality with targeted chipbreaker design The IR12UN-3 chipbreaker is designed to promote short, segmented chips when machining materials classified in ISO 513 group M. By shaping the shear behaviour at the cutting zone, the chipbreaker supports stable evacuation and prevents long, entangling swarf that can compromise both tool life and component finish. The result is an improved, consistent surface quality with fewer manual interventions for chip clearing, which benefits automated turning cells and manual lathes alike. Practical selection and integration into tool systems When selecting an indexable insert for a turning application, matching the grade and chipbreaker to the workpiece material is essential; the WMP32G grade is specifically tailored for stainless steel under medium to robust conditions. The insert is suitable for standard turning toolholders that accept the TS22 geometry; toolset planners will find it useful where a balance of process reliability and economical tool life is required. For precise parameter windows and holder compatibility, technical advice from Metav Werkzeuge is available to ensure correct integration and optimise cutting data for the production environment. For tailored machining recommendations or to secure an immediate supply of Walter Tools TS22-IR12UN-3 WMP32G inserts, contact Metav Werkzeuge—technical support and ordering assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: TS22-IR12UN-3-WMP32G-WALTER ISO designation: TS22-IR12UN-3 WMP32G Product type: turning insert Facts Material group: M (stainless steel) Grade: WMP32G Chipbreaker: IR12UN-3 Special features Coating technology: Tiger·tec Gold Substrate: coated carbide (hardmetal) Manufacturer: Walter Tools Typical application: medium to robust stainless steel turning FAQ What materials is this insert suitable for? The TS22-IR12UN-3 WMP32G insert is specified for stainless steel applications (ISO group M) and is engineered to handle the ductility and heat characteristics typical of these alloys. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WMP32G grade reduces adhesion and improves thermal resistance, which enhances tool life and supports consistent cutting performance during extended stainless steel turning operations. What is the function of the IR12UN-3 chipbreaker? The IR12UN-3 chipbreaker promotes controlled, short chip formation to aid evacuation and protect the cutting edge, leading to more reliable surface finishes and fewer machine stoppages for chip clearing when using this insert. Is this insert compatible with standard TS22 toolholders? Yes, the TS22 geometry matches standard toolholder interfaces designed for that designation; ensure the holder supports the insert's profile and clamping method for secure operation. Where can cutting data and selection guidance be obtained? Cutting data and application-specific guidance for the TS22-IR12UN-3 WMP32G insert are available from Metav Werkzeuge; their technical advisors can recommend feeds, speeds and holder choices for the intended production setup. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new goods from the manufacturer.
TS22-IR16UN-3 WMP32G WMP32G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WMP32G grade for secure chip formation in stainless steel turning; the optimized IR16UN-3 chipbreaker supports consistent edge stability and sustained productivity. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. TS22-IR16UN-3 WMP32G indexable turning insert — Tiger·tec Gold coating, chipbreaker IR16UN-3, Walter Tools TS22-IR16UN-3 WMP32G is an indexable turning insert designed for machining stainless steel, combining a high-performance coating with a chipbreaker tuned for reliable chip control in demanding turning operations. Tiger·tec Gold coating for extended tool life Optimised IR16UN-3 chipbreaker for stable chips Designed for stainless steel machining Walter Tools quality with consistent edge stability Longer tool life thanks to advanced coating technology The Tiger·tec Gold system in combination with the WMP32G grade provides a balanced wear resistance and toughness profile suitable for turning operations on stainless steel. The multilayer coating reduces flank wear and helps to prevent premature edge failure, which translates into fewer insert changes and lower process interruptions. For production environments where tool-change downtime directly affects throughput, this coating-grade pairing supports longer tool life and more predictable maintenance intervals. Controlled chip formation for safer, uninterrupted turning The integrated IR16UN-3 chipbreaker is engineered to produce short, manageable chips under medium to robust cutting conditions. By promoting consistent chip geometry, the insert reduces the risk of built-up edge and improves evacuation, which in turn lowers the likelihood of surface damage or machine stoppages. In practical terms, this means a more reliable cycle time and reduced operator intervention during long turning runs. High process reliability when machining stainless steels (ISO group M) Specified for material group M, this insert addresses the typical challenges of stainless steel—tendency to work-harden, poor thermal conductivity and high ductility. The WMP32G coated carbide grade is tuned to maintain a sharp, stable cutting edge even as temperatures rise locally, supporting consistent material removal and better surface finish. For small to mid-sized batch production where repeatability and surface integrity matter, the insert helps achieve predictable results with fewer rejects. Productivity and predictable performance in everyday use With its focus on robust edge stability and optimised chip control, the insert supports higher average cutting parameters without sacrificing reliability. The result is clearer planning of production rates and reduced variance between shifts. For application queries or to confirm suitability for specific stainless steel grades and machining parameters, Metav Werkzeuge provides technical guidance and cutting data on request; email info@metav-werkzeuge.com or call +49 2822 7131930 for bespoke recommendations. For tailored application advice and immediate availability contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — request the TS22-IR16UN-3 WMP32G insert and discuss optimal cutting data with our specialists Technical data SKU: TS22-IR16UN-3-WMP32G-WALTER Name: Drehwendeschneidplatte TS22-IR16UN-3 WMP32G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WMP32G Chipbreaker: IR16UN-3 Material group: M Product type: Drehwendeschneidplatte Facts Material group code: M Suitable for stainless steel: yes Special features Coating technology: Tiger·tec Gold Coated carbide grade: WMP32G Chip control: IR16UN-3 Application focus: stainless steel machining Typical use: medium to robust cutting conditions FAQ What materials is this insert designed for? The TS22-IR16UN-3 WMP32G insert is specified for ISO material group M, making it suitable for machining stainless steel in turning applications. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WMP32G grade increases wear resistance and supports longer tool life, which helps reduce insert changes and improves overall process uptime. What advantage does the IR16UN-3 chipbreaker provide? The IR16UN-3 chipbreaker promotes short, controlled chips and stable evacuation, reducing the risk of built-up edge and machine interruptions during continuous turning. Is this insert suitable for finish turning stainless steels? Yes; the combination of the coating and grade provides a stable cutting edge that supports improved surface quality in many finishing operations on stainless steels. Where to get cutting data or application support? Metav Werkzeuge can provide application-specific cutting data and recommendations; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
TS22-IR2.0ISO-2 WMP32G Wendeplatten - Walter Tools
Drehwendeschneidplatte TS22-IR2.0ISO-2 WMP32G von Walter Tools Die TS22-IR2.0ISO-2 WMP32G ist eine beschichtete Drehwendeschneidplatte aus der Serie Tiger-tec Gold für die produktive Bearbeitung von rostfreien Stählen. Hohe Prozesssicherheit bei rostfreien Stählen Tiger-tec Gold Beschichtung für längere Standzeit IR2.0ISO-2 Spanformer für stabile Spanbildung Für mittlere bis robuste Zerspanungsbedingungen geeignet Original Walter Tools Qualität und Wiederholgenauigkeit Höhere Standzeit durch beschichteten Schneidstoff Dank der Tiger-tec Gold Beschichtung und der Sorte WMP32G bietet diese Wendeschneidplatte eine deutlich verbesserte Verschleißfestigkeit gegenüber unbeschichteten Lösungen. Die Kombination aus beschichtetem Hartmetall und einem optimierten Spanformer reduziert Aufbauschneiden und sorgt für konstante Schneidkanten, sodass Maschinenlaufzeiten verlängert und Stillstandszeiten reduziert werden. Anwender profitieren von planbaren Wechselintervallen und geringeren Werkzeugkosten pro gefertigte Einheit. Sichere Spanbildung und konstante Oberflächengüte Der integrierte IR2.0ISO-2 Spanformer ist speziell für die Herausforderungen bei rostfreien Stählen ausgelegt und unterstützt eine kontrollierte Spanabfuhr auch bei zähen Werkstoffen. Dies erhöht die Prozesssicherheit und trägt zu gleichmäßigen Oberflächen bei, wodurch Nachbearbeitungsaufwand reduziert wird. Fertigungsbetriebe, die auf stabile Produktionsläufe und reproduzierbare Ergebnisse Wert legen, erreichen mit dieser Wendeschneidplatte zuverlässige Performance. Anwendungsfokus und Zielgruppe Entwickelt für den Einsatz in der Serienbearbeitung und im Mittel- bis Schruppschnitt, richtet sich die Wendeschneidplatte an CNC-Bearbeiter, Lohnfertiger und Maschinenbauer, die rostfreie Stähle bearbeiten. Die Platte eignet sich besonders, wenn es auf Standzeit, Wiederholgenauigkeit und einfache Sortenzuordnung ankommt. Bei Unsicherheiten zur Werkzeugauslegung oder zur Schnittdatenoptimierung hilft der technische Vertrieb gern weiter. Für präzise und wirtschaftliche Zerspanung von rostfreien Stählen die TS22-IR2.0ISO-2 WMP32G von Walter Tools über Metav Werkzeuge einsetzen – bei Bedarf persönliche Beratung unter 📧 info@metav-werkzeuge.com oder ☎️ +49 2822 7131930 anfordern. Produktmerkmale Artikelnummer: TS22-IR2.0ISO-2-WMP32G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Bezeichnung: TS22-IR2.0ISO-2 WMP32G Sorte: WMP32G Spanbrecher: IR2.0ISO-2 Produktart: Drehwendeschneidplatte Fakten Besonderheiten Beschichtung: Tiger·tec Gold (beschichtetes Hartmetall) Sortenbeschreibung: WMP32G (beschichtetes Hartmetall) Werkstoffgruppe: M: rostfreie Stähle, zähes Material, Wärmeentwicklung beachten Einsatzbereich: mittlere bis robuste Zerspanungsbedingungen Herstellerhinweis: Original Walter Tools Produkt FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die TS22-IR2.0ISO-2 WMP32G ist speziell für rostfreie Stähle ausgelegt; die Sorte WMP32G unterstützt sichere Spanbildung bei zähen Werkstoffen und reduziert Aufbauschneiden. Welche Vorteile bietet die Tiger-tec Gold Beschichtung? Die Tiger-tec Gold Beschichtung der WMP32G erhöht die Verschleißfestigkeit und damit die Standzeit, was die Wirtschaftlichkeit bei Serienfertigung verbessert. Wie unterstützt der Spanformer IR2.0ISO-2 die Bearbeitung? Der IR2.0ISO-2 Spanformer sorgt für kontrollierte Spanabfuhr und stabile Schneidkanten, was zu konstanteren Oberflächen und geringerer Nachbearbeitung führt. Ist die Wendeschneidplatte für Schrupp- und Schlichtprozesse geeignet? Ja, die TS22-IR2.0ISO-2 WMP32G ist für mittlere bis robuste Einsatzbedingungen geeignet und kann sowohl im Schrupp- als auch im Schlichtbereich eingesetzt werden, je nach Schnittdaten. Für welche Anwender ist dieses Produkt besonders geeignet? Vor allem CNC-Bearbeiter, Lohnfertiger und produzierende Betriebe, die rostfreie Stähle zerspanen und Wert auf Prozesssicherheit und Standzeit legen, profitieren von dieser Wendeschneidplatte. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com