VCMT110304-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
High process security and a wear-resistant coating deliver reliable, productive turning of stainless steel and heat‑resistant alloys; the robust chipformer and compact corner radius ensure consistent surface quality and fewer tool changes. Order the insert via Metav Werkzeuge or consult our specialists for application support. VCMT110304-FM4 WSM10S Drehwendeschneidplatte — rhombic 35° turning insert with Tiger·tec Silver by Walter Tools The VCMT110304-FM4 WSM10S is a rhombic 35° indexable turning insert designed for productive machining of stainless steels and heat‑resistant superalloys in demanding turning operations Tiger·tec Silver coating for edge stability Rhombic 35° geometry for versatile turning FM4 chipbreaker for predictable chip control Stable cutting edges for demanding materials The Tiger·tec Silver coating combined with the WSM10S carbide grade delivers a good balance between hardness and toughness, reducing flank wear under high temperatures. This makes the insert particularly suited to machining stainless steel and heat‑resistant superalloys, where thermal loads and workhardening can otherwise shorten tool life. The result is a more stable process window and fewer unplanned tool changes, supporting uninterrupted production and predictable component quality. Geometry that improves surface finish and accuracy The rhombic 35° shape with a 0.4 mm corner radius provides a compact cutting edge that promotes fine finishing while maintaining strength for light to medium cuts. The FM4 chipformer is optimised to break and evacuate chips reliably, lowering the risk of built‑up edge and surface deterioration. For users with limited experience of insert geometry, the compact radius helps achieve consistent workpiece tolerances without complex parameter changes. Reduced cycle times through consistent tool life By combining a modern coating system with a carbidesort tailored for adhesion resistance, the insert extends tool life and supports higher cutting parameters where appropriate. The balanced substrate and coating reduce catastrophic edge failures and allow for longer uninterrupted machining intervals, meaning less downtime for insert changes and a lower number of spare inserts in stock. This advantage translates directly into improved throughput and lower unit production effort. Clear compatibility and straightforward specification The insert conforms to ISO turning group applicability for M and S materials and features a 7° clearance angle and thickness code 03 with insert size 11, tolerance class M. The specification supports machining of stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering flexibility across mixed production batches. For integrators, the standard form facilitates straightforward mounting in common toolholders for rhombic VCMT styles. Choose Walter Tools’ Tiger·tec Silver inserts for high process reliability — contact Metav Werkzeuge for application advice and precise grade selection at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCMT110304-FM4-WSM10S-WALTER Designation: VCMT110304-FM4 WSM10S Product type: Drehwendeschneidplatte (indexable turning insert) Series: Tiger-tec Silver Grade: WSM10S Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Tolerance class: M Special features Chipbreaker: FM4 Coating: Tiger·tec Silver Material groups: S / M Application: Machining stainless steel and heat‑resistant superalloys Execution: T FAQ What materials is this insert suited for? The VCMT110304-FM4 WSM10S is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering reliable performance in these challenging materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this Walter Tools insert promotes predictable chip segmentation and evacuation, which reduces built‑up edge and helps maintain surface quality during turning. What does the 0.4 mm corner radius mean for finish and strength? A 0.4 mm corner radius provides a fine cutting edge for improved surface finish while still offering sufficient edge strength for stable finishing and light roughing operations with this insert. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation between our company and the named manufacturers. The offered item is original, factory‑new merchandise of the stated manufacturer.
VCMT110304-FM4 WSM20S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating and the FM4 chipbreaker with a rhombic 35° geometry delivers secure chip control and long tool life for demanding stainless steel and superalloy turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. VCMT110304-FM4 WSM20S — Turning indexable insert with FM4 chipbreaker, Tiger‑tec Silver (Walter Tools) VCMT110304-FM4 WSM20S is a rhombic 35° turning insert developed for stable machining of stainless steels and heat‑resistant superalloys in industrial production. Tiger‑tec Silver coating for thermal stability FM4 chipbreaker for predictable chip control Rhombic 35° geometry for versatile turning Reliable performance on stainless steels and superalloys The insert is equipped with the WSM20S grade in the Tiger‑tec Silver family, optimised for materials classified as M and S under ISO 513. This combination improves thermal stability and supports secure cutting‑edge behaviour when machining tough, heat‑sensitive alloys. For production environments this means fewer interruptions from built‑up edge and a consistent surface finish across batches, contributing to predictable process outcomes and reduced scrap rates. Controlled chips and consistent surface results Thanks to the FM4 chipbreaker and the rhombic 35° layout, the geometry produces manageable chip formation even under challenging conditions. The insert’s 7° clearance and 0.4 mm corner radius are designed to balance edge strength and finishing capability, resulting in improved chip control and a steady contact zone at the tool tip. The outcome is smoother turning cycles, fewer manual interventions and a reliable part finish that supports downstream assembly processes. Boosted productivity with process security The design focuses on reproducibility and economy: robust flank support and the coated grade extend edge life and reduce insertion changes, which improves overall productivity. The insert suits serial and small‑batch production where process security is essential, enabling sustained cutting speeds and repeatable component quality. Using a dedicated Walter Tools grade helps maintain tool‑room standards and simplifies insert selection for engineers seeking dependable machining performance. Application guidance and technical support This turning insert is intended for conventional external and light finishing operations on stainless steel and heat‑resistant alloys; it performs best when paired with rigid tool holders and stable workholding. For specific cutting parameters, workpiece conditions or alternative materials, technical recommendations are available. If there is uncertainty whether this insert fits a particular application, Metav Werkzeuge provides tailored advice and cutting recommendations to ensure the best result for each machining task. Contact Metav Werkzeuge for tailored cutting data and to specify the correct Walter Tools insert for the application, or request a cutting recommendation from our consultants Technical data Article number: VCMT110304-FM4-WSM20S-WALTER Description: VCMT110304-FM4 WSM20S Manufacturer: Walter Tools Product type: Turning indexable insert Facts Relief angle: 7° Corner radius: 0.4 mm Geometry: Rhombus 35° Inscribed circle / size: 11 Plate thickness code: 03 Tolerance class: M Special features Grade / series: WSM20S, Tiger‑tec Silver Chipbreaker: FM4 Material suitability: stainless steel (M), superalloys / titanium (S) Application focus: turning, finishing / light cutting Execution: T FAQ What materials is this insert suitable for? The VCMT110304-FM4 WSM20S insert is formulated for stainless steel and heat‑resistant superalloys (ISO groups M and S), providing stable cutting behaviour on those materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this Walter Tools insert produces predictable chip shapes and improves evacuation, which helps maintain a consistent surface finish and reduces the risk of built‑up edge. What does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating increases thermal resistance and edge stability for the insert, supporting longer tool life and steady performance in demanding turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The mention of brand names such as Walter Tools is for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
VCMT110304-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver thermal resistance, the WSM30S grade for demanding materials and the compact rhombic 35° geometry to secure reliable cutting performance and consistent edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VCMT110304-FM4 WSM30S — indexable turning insert with Tiger·tec Silver for stainless steels and superalloys (Walter Tools) The VCMT110304-FM4 WSM30S is an indexable turning insert engineered for demanding turning tasks in stainless steels and heat-resistant alloys, combining a thermally stable coating with a robust chipbreaker for reliable machining. Tiger·tec Silver coating for high thermal resistance WSM30S grade for stainless steel and superalloys Rhombic 35° geometry for versatile turning 0.4 mm corner radius for consistent edge strength 7° relief angle for secure chip formation Consistent productivity through thermal stability and edge control The combination of the Tiger·tec Silver coating and the WSM30S carbide grade delivers a measurable improvement in tool life when machining materials that generate high temperatures. The coating enhances heat resistance and reduces wear, while the alloy-specific substrate balances toughness and hardness to avoid premature chipping. This technical pairing results in more predictable tool intervals and fewer unscheduled stoppages, supporting higher machine uptime and a better cost-per-part ratio. Material suitability explained for reliable process planning Designed for machining stainless steels and classes of heat-resistant superalloys, the insert’s metallurgy and chipbreaking geometry address typical challenges such as built-up edge formation and poor thermal conductivity in the workpiece. The FM4 chipbreaker supports controlled chip formation and evacuation, which stabilises cutting forces and helps maintain surface quality. For operators and process planners, this means easier parameter selection and more repeatable results in difficult-to-cut materials. Geometry and edge features that protect the cutting edge The rhombic 35° insert form and the 0.4 mm corner radius provide a balanced compromise between strength and accessibility to narrow features. The 7° relief angle reduces rubbing on the flank, improving cutting efficiency and decreasing heat transfer into the tool body. These design choices contribute to a stable cutting edge under intermittent cuts and heavy cross-sectional engagement, translating into fewer insert indexing operations and less downtime for tool changes. Practical application scenarios and integration into existing tooling systems The insert is compatible with standard clamping systems for VCMT-format indexable tooling and is particularly suited for production environments tackling medical components, aerospace parts or high-performance industrial components made from corrosion-resistant steels and superalloys. Its combination of coating, substrate and chipbreaker is aimed at achieving consistent quality and longer edge life, which supports leaner tooling inventories and reduces the frequency of regrinding or replacement. Contact Metav Werkzeuge for tailored cutting-data recommendations and stock availability of Walter Tools Tiger·tec Silver inserts, and receive specialist application support from our consultants Technical Data Article number: VCMT110304-FM4-WSM30S-WALTER Designation: VCMT110304-FM4 WSM30S Product type: Indexable turning insert (Drehwendeschneidplatte) Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 35° Size: 11 (designation code) Thickness code: 03 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Recommended for: stainless steels and heat-resistant superalloys Typical applications: demanding turning, unstable thermal conditions, parts requiring surface quality control FAQ What materials is this insert designed for? The VCMT110304-FM4 WSM30S insert is formulated for stainless steels and heat-resistant superalloys, offering thermal stability and controlled chip formation for these demanding groups. How does the Tiger·tec Silver coating affect performance? Tiger·tec Silver increases thermal resistance and wear protection on the VCMT110304-FM4 WSM30S, improving edge life and process consistency when machining hot-working materials. Can the insert be used in standard VCMT toolholders? Yes, the insert follows the VCMT geometry and is suitable for standard VCMT-compatible clamping systems used with Walter Tools indexable tooling. What benefit does the 0.4 mm corner radius bring? A 0.4 mm corner radius provides enhanced edge strength without compromising access to tighter contours, helping to withstand intermittent loads and extend usable edge life. Is the FM4 chipbreaker suitable for heavy cuts? The FM4 chipbreaker is designed to support stable chip control in applications with significant heat generation and cutting force, making it appropriate for heavier cross-sections in stainless and superalloy machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT110304-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of a Walter Cermet grade designed for fine surface quality and a dedicated FP4 chipbreaker for stable machining; the compact rhombic geometry and defined relief angle ensure reliable turning performance — order directly via Metav Werkzeuge or consult the team for application advice. VCMT110304-FP4 WEP10C — Indexable turning insert, Walter Cermet grade, FP4 chipbreaker The VCMT110304-FP4 WEP10C is a rhombic 35° indexable turning insert from the Walter Cermet series, engineered for finishing and precision turning where surface quality and repeatable chip control are required Walter Cermet grade WEP10C for fine finishes Rhombic 35° insert geometry for versatile turning FP4 chipbreaker optimised for stable chip control 7° relief and 0.4 mm nose radius for precise profiles Achieve consistent surface quality with a cermet cutting grade The Walter Cermet composition and the WEP10C grade focus on delivering a fine surface finish and consistent edge integrity in finishing operations. Cermet materials combine ceramic and metallic properties to offer high hardness at elevated temperatures while reducing built-up edge; this results in improved part appearance and longer tool life under steady cutting conditions. The FP4 chipbreaker supports controlled chip formation, reducing the risk of irregular chips that can mark the workpiece. For shops seeking predictable finishing results, the combination of grade and chip geometry provides a technically sound solution that simplifies process planning and improves first-pass yield. Precision geometry for adaptable turning and profile control The rhombic 35° shape with a 0.4 mm nose radius and a 7° relief angle enables accurate profile reproduction and safe edge engagement in common turning tasks. The compact geometry reduces cutting forces compared with larger-nosed inserts while maintaining dimensional control, making it suitable for light to medium finishing cuts. The insert’s tolerance class M ensures consistent seat fit and repeatability across toolholders, which supports automated changeovers and stable cycle times. In practice, this means fewer interruptions for rework and more predictable throughput in batch production. Process stability and practical application advantages Equipped with the FP4 chipbreaker, the insert promotes reliable chip evacuation and steady performance across typical finishing feeds and speeds. The insert thickness and ISO designation reflect industry standards, allowing straightforward integration into existing tool systems without special adaptation. Material details are catalogue-dependent; therefore, compatibility should be checked against the machining matrix for the intended workpiece. Overall, the design emphasises operational stability and ease of use, helping workshops maintain consistent quality while keeping tooling logistics simple. Speak to Metav Werkzeuge for application guidance and availability of Walter Tools VCMT110304-FP4 WEP10C inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCMT110304-FP4-WEP10C-WALTER Article: VCMT110304-FP4 WEP10C Product type: Indexable turning insert Series: Walter Cermet Grade: WEP10C Facts Relief angle: 7° Nose radius: 0.4 mm Insert size: 11 Thickness: 03 Geometry: Rhombic 35° Tolerance: M Special features Chipbreaker: FP4 Material: Catalogue-dependent ISO designation: VCMT110304-FP4 WEP10C Execution: T FAQ What machining tasks suit this insert best? The VCMT110304-FP4 WEP10C insert is tailored for finishing and precision turning where a fine surface and controlled chip formation are priorities, particularly in stable, repeatable operations. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker promotes steady chip control and evacuation, which reduces the likelihood of surface marks and supports consistent cutting forces during finishing cuts. What does the WEP10C grade offer compared with conventional carbides? WEP10C is a cermet grade that emphasises surface finish and thermal hardness; it provides a harder edge for fine finishing while maintaining adequate toughness for controlled turning tasks. Is the insert compatible with standard toolholders? Yes, the ISO designation and the tolerance class M allow the insert to seat reliably in holders designed for VCMT geometry without special adapters. How should the nose radius and relief angle influence cutting parameters? The 0.4 mm nose radius and 7° relief angle favour moderate feed rates and light finishing depths; they help maintain profile accuracy and reduce cutting-induced distortion. Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. The mentioned brand names and trademarks are the property of their respective owners. The offered item is an original, factory-new product of the manufacturer.
VCMT110304-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the FP4 chipbreaker geometry for predictable turning performance and extended tool life; order directly via Metav Werkzeuge or request advice from our technical consultants. VCMT110304-FP4 WKP01G indexable turning insert — Rhombus 35°, 7° relief — Walter Tools The VCMT110304-FP4 WKP01G is an indexable turning insert designed for robust machining of steel and cast iron, offering a balanced mix of wear resistance and reliable chip control for general turning operations. Tiger·tec Gold coating for extended tool life Optimised FP4 chipbreaker for controlled chips Rhombus 35° form with 7° clearance angle Durable coating for longer productive intervals The Tiger·tec Gold coating combined with the WKP01G carbide grade delivers notably improved wear resistance and consistent edge stability in mixed production environments. This surface treatment reduces abrasive and adhesive wear mechanisms during turning, which in practice translates to fewer insert changes and steadier cycle times. For workshops aiming to raise process reliability, the coated grade helps maintain cutting-edge integrity across a range of steels and cast irons, supporting steady throughput and reduced machine downtime. Geometry that stabilises chip formation and surface finish The insert’s FP4 chipbreaker and Rhombus 35° geometry with a 7° relief angle are designed to produce predictable, short chips on both steel (P) and cast iron (K). The 0.4 mm corner radius supports a controlled cutting edge that balances surface finish and edge strength, particularly in finishing to medium-turning operations. The chipformer’s design ensures reliable chip evacuation and less risk of entanglement, which keeps toolpaths clear and reduces interruptions on automated or manual turning centres. Reproducible results and shop-floor compatibility Tolerance class M and the standardised VCMT ISO designation support repeatable seating and indexing in compatible toolholders, aiding quick tool changes and consistent part quality. The insert’s nominal size and plate thickness follow common industry dimensions, enabling straightforward integration with existing turning systems. This mechanical predictability helps planners and operators estimate tool life and surface quality more accurately, supporting leaner inventory strategies and steady production planning. Practical application notes and selection guidance The VCMT110304-FP4 WKP01G is suited to machining unalloyed and alloyed steels as well as a wide range of cast irons under conventional turning conditions. For general guidance, select slightly higher feeds for cast-iron applications to promote chip breaking, and prefer moderate cutting speeds where surface finish is critical. When optimising a process, combine the insert with a stable toolholder and a rigid set-up to exploit the Tiger·tec Gold coating and FP4 chip control effectively; further machining parameters can be provided on request for specific material grades. For technical recommendations tailored to a production scenario or to place an order, contact Metav Werkzeuge; our consultants provide practical support and product availability information Technical data Article number: VCMT110304-FP4-WKP01G-WALTER Article designation: VCMT110304-FP4 WKP01G Product type: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Series: Tiger-tec Gold Grade: WKP01G Form: Rhombus 35° Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate thickness: 03 Tolerance class: M Special features Chipbreaker: FP4 Applicable materials: steel (P) and cast iron (K) Base designation: VCMT110304-FP4 Execution: T Coating technology: Tiger·tec Gold FAQ What materials is this insert suitable for? The VCMT110304-FP4 WKP01G from Walter Tools is designed for machining steel (P) and cast iron (K) in typical turning applications. How does the FP4 chipbreaker affect production? The FP4 chipbreaker on the VCMT110304-FP4 WKP01G promotes short, controlled chips and helps maintain consistent chip evacuation, reducing interruptions in automated turning cells. Is the Tiger·tec Gold coating beneficial for mixed production? Yes, the Tiger·tec Gold coating improves wear resistance and edge life on the WKP01G grade, which supports reliable performance across mixed batches of steel and cast-iron parts. Which applications match the Rhombus 35° geometry best? Rhombus 35° is versatile for general turning; with the 7° relief and 0.4 mm radius it is particularly suited to finishing and medium-turning where a stable edge and good surface finish are required. How does tolerance class M influence tool handling? Tolerance class M ensures consistent seat and fit in compatible toolholders, aiding rapid indexability and reproducible part quality when using the insert in production routines. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer. It is an original factory-new product of Walter Tools. Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCMT110304-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and a geometry optimised for steel turning to increase throughput and tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VCMT110304-FP4 WPP10G — Indexable turning insert for steel | Walter Tools VCMT110304-FP4 WPP10G is an indexable turning insert designed for general steel turning applications, delivering consistent edge stability and efficient chip control in serial production. Tiger·tec Gold coated carbide grade WPP10G FP4 chipbreaker for stable chip control Rhombic 35° geometry with 0.4 mm corner radius Raise productivity through a tougher coated grade and consistent edge life The Tiger·tec Gold technology combined with the WPP10G grade provides a coated carbide solution engineered for the thermal and mechanical demands of steel machining. The specialised coating increases wear resistance and stabilises the cutting edge, which translates to longer intervals between index changes and fewer unscheduled tool swaps. For production environments, this means improved uptime and lower unit cost per component. The hard-wearing surface also resists built-up edge formation, thereby supporting more constant dimensional results over longer running times. Achieve predictable chip formation and surface finish with an optimised geometry The FP4 chipbreaker and rhombic 35° outline deliver controlled chip flow and reduced cutting forces when machining steels. The insert’s 0.4 mm corner radius helps maintain a robust cutting edge for light to medium finishing passes, improving surface quality while reducing the risk of chipping. The 7° relief angle provides effective clearance behind the cutting edge, preventing rubbing and heat build-up during interrupted cuts. These combined geometry features enable a balance between process stability and the ability to run at productive cutting parameters in batch and continuous turning operations. Versatile use in steel turning with clear process benefits Designed for the ISO material group P, the insert is suitable for a wide range of unalloyed and alloyed steels commonly encountered in workshops and production facilities. The VCMT110304-FP4 WPP10G insert’s format and thickness support secure clamping in standard indexable toolholders, offering predictable repeatability and straightforward index changes. Because the grade and geometry are tuned for steel, operations benefit from fewer tool trials during setup and a faster ramp-up to optimal cutting conditions, helping to shorten cycle times and reduce scrap rates. For technical advice on integrating this Walter Tools Tiger·tec Gold insert into an existing turning process or to check stock availability, please contact Metav Werkzeuge – the team will advise on the best grade and geometry for specific steel applications. Technical data Article number: VCMT110304-FP4-WPP10G-WALTER SKU: VCMT110304-FP4-WPP10G-WALTER Designation: VCMT110304-FP4 WPP10G Core specifications Shape: Rhombic 35° Inscribed circle / size: 11 Thickness: 03 (nominal) Corner radius: 0.4 mm Relief angle: 7° Tolerance class: M Features and suitability Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: FP4 Material group: Steel (P) Execution: T Coated cemented carbide FAQ What material is this insert designed for? The insert is designed for the ISO material group P and is optimised for machining unalloyed and alloyed steel. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating increases wear resistance and thermal stability, resulting in more consistent edge life and longer intervals between indexing. Which chipbreaker is fitted to this insert and what benefit does it provide? This insert features the FP4 chipbreaker, which ensures controlled chip formation and reduced risk of built-up edge during turning. Is the geometry suitable for finishing passes? The 0.4 mm corner radius and rhombic 35° shape are suitable for light to medium finishing operations while maintaining edge robustness. Can the insert be clamped in standard toolholders? Yes, the insert conforms to common indexable insert dimensions and is suitable for standard turning toolholders that accept VCMT-format inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new merchandise from the manufacturer.
VCMT110304-FP4 WPP20G FP4 Wendeplatten - Walter Tools
VCMT110304-FP4 WPP20G Drehwendeschneidplatte für Stahl — Walter Tools Die VCMT110304-FP4 WPP20G ist eine vielseitige Drehwendeschneidplatte für die effiziente Zerspanung von Stahl im Industrieeinsatz Tiger·tec Gold Beschichtung für hohe Standzeit Für Stahl nach ISO 513 optimiert Rhombus 35° Form für stabile Schneidkante Freiwinkel 7° und Eckenradius 0,4 mm Höhere Produktivität durch moderne Beschichtung Die Kombination aus Tiger·tec Gold Beschichtung und beschichtetem Hartmetall sorgt für konstante Leistung bei Serienfertigung. Durch die gezielte Schichtenarchitektur werden Reibung und Verschleiß reduziert, was die Standzeit erhöht und ungeplante Stillstände verringert. Anwender profitieren von vorhersehbarer Werkzeugleistung und weniger Nacharbeit. Präzise Spanformer und gleichmäßige Spanbildung Der integrierte FP4 Spanbrecher ist auf stabile Spanbildung bei Stahl ausgelegt. Bei wechselnden Schnittbedingungen entsteht ein vorhersehbarer Spanfluss, der die Maschinenlaufzeit optimiert und das Risiko von Werkzeugbrüchen senkt. Diese Eigenschaft macht die Platte besonders geeignet für produktive Dreharbeiten und längere Werkstückläufe. Geometrie für zuverlässige Schneidkanten Die Rhombus 35° Plattenform mit einem Freiwinkel von 7° und einem Eckenradius von 0,4 mm vereint hohe Stabilität mit Wärmeabfuhr. Das Ergebnis ist eine robuste Schneidkante, die präzise Oberflächen liefert und Standzeiten verlängert. Diese Geometrie reduziert Vibrationen und unterstützt konstante Oberflächenqualität bei Serienproduktionen. Einsatzbereich und Zielgruppe Die Wendeschneidplatte eignet sich besonders für Fertigungsbetriebe und Lohnfertiger, die vorwiegend Stahl bearbeiten und Wert auf Prozesssicherheit legen. Entwickelt für Anwender, die reproduzierbare Ergebnisse und hohe Produktivität erwarten, ist die Platte ideal für mittlere bis hohe Schnittparameter und industrielle Serienprozesse. Empfehlung: Für eine wirtschaftliche Stahlzerspanung die VCMT110304-FP4 WPP20G über Metav Werkzeuge anfragen – Technische Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: VCMT110304-FP4-WPP20G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Ausführung: T Bezeichnung: VCMT110304-FP4 WPP20G Fakten Freiwinkel: 7° Eckenradius: 0,4 mm Plattengröße: 11 mm Plattendicke: 03 Plattenform: Rhombus 35° Besonderheiten Spanbrecher: FP4 Sorte: WPP20G (beschichtetes Hartmetall) Bearbeitbar: P (Stahl) Toleranzklasse: M Baureihe: Tiger-tec Gold FAQ Welche Werkstoffe sind für diese Wendeschneidplatte geeignet? Die Platte ist primär für Stahl ausgelegt. Die Sorte WPP20G und die Geometrie sind nach ISO 513 auf Bearbeitung von P‑Werkstoffen abgestimmt. Für welche Anwendungen ist die VCMT110304-FP4 WPP20G besonders geeignet? Die Platte eignet sich für produktive Drehprozesse in der Serienfertigung, insbesondere dort, wo stabile Spanbildung und lange Standzeiten gefragt sind. Was bedeutet die Sortenbezeichnung WPP20G? WPP20G steht für eine Walter‑Schneidstoffsorte im Tiger·tec Gold Portfolio; sie kennzeichnet ein beschichtetes Hartmetall mit ausgewogener Kombination aus Verschleißfestigkeit und Zähigkeit. Wie unterstützt die FP4‑Geometrie den Fertigungsprozess? Der FP4 Spanbrecher fördert gleichmäßige Spanbildung und reduziert Spanverwicklungen, was die Maschinenlaufzeit und Prozesssicherheit erhöht. Ist die Platte für Vormaterial mit harter Oberfläche geeignet? Die Platte ist auf unlegierte und legierte Stähle ausgelegt; für sehr harte oder vorgehärtete Materialien sind spezialisierte Sorten empfehlenswert. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT110304-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Benefit from reliable cast iron machining thanks to the WKK20S coated carbide grade and the RK4 chipbreaker; the Tiger·tec Silver technology supports stable edge life and consistent chip control. Order the VCMT110304-RK4 WKK20S turning insert directly via Metav Werkzeuge or ask the consultants for tailored machining advice. VCMT110304-RK4 WKK20S — Turning indexable insert, Tiger·tec Silver, for cast iron (Walter Tools) VCMT110304-RK4 WKK20S is a rhombic 35° turning insert from Walter Tools, engineered for efficient machining of cast iron with a 7° clearance angle and a 0.4 mm nose radius. Tiger·tec Silver coating technology RK4 chipbreaker for short chips Rhombic 35° geometry, 0.4 mm nose radius Increase throughput on cast iron with optimised grade and chip control The combination of the WKK20S grade and the RK4 chipbreaker is configured to manage the short, brittle chips typical of cast iron. The coated carbide substrate of the Tiger·tec Silver series reduces abrasive wear, which extends effective cutting life under standard production conditions. For production managers seeking measurable gains, this leads to fewer tool changes and reduced cycle-time variability; the chipforming behaviour contributes to safer swarf handling and more stable machining sequences. Consistent surface quality through precise geometry control A rhombic 35° insert form with a 0.4 mm nose radius and 7° clearance provides a balanced compromise between robustness and finishing capability. The relatively small nose radius helps maintain dimensional accuracy on narrow profiles while the geometry supports repeatable cutting forces, which aids in achieving reproducible surface roughness. In practical terms, the geometry minimises vibration on light to medium cuts and helps maintain a predictable tool mark pattern across batches. Lower total cost through extended edge life and predictable performance Tiger·tec Silver's coating system is designed to resist the abrasive micro‑particles found in many cast iron grades, helping the insert deliver stable edge life across longer production runs. The result is a favourable tool cost per component due to fewer indexings and replacements. For purchasing and process planning, this grade offers a reliable baseline: consistent wear rates simplify inventory forecasting and support throughput planning in repetitive turning operations. Practical application notes and machine compatibility The insert is supplied in the VCMT110304-RK4 form factor and fits holders designed for rhombic 35° turning inserts; thickness and clamping must match the specified insert dimensions. The RK4 chipbreaker is recommended where short, controlled chips are required; it is particularly effective on interrupted cuts and when machining grey or nodular cast iron. For tailored cutting data, feed and depth adjustments should follow machine rigidity and workpiece clamping; for complex enquiries regarding fixtureation or cutting parameters, Metav Werkzeuge’s technical consultants are available to assist. For reliable cast iron turning with Walter Tools’ Tiger·tec Silver grade WKK20S, contact Metav Werkzeuge for personalised application support and procurement: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCMT110304-RK4-WKK20S-WALTER Product: Turning indexable insert Manufacturer: Walter Tools Facts Plate size: 11 Thickness code: 03 Clearance angle: 7° Nose radius: 0.4 mm Plate geometry: Rhombic 35° Special features Grade: WKK20S (coated carbide, Tiger·tec Silver) Chipbreaker: RK4 Suitable for: cast iron Tolerance class: M Series: Tiger·tec Silver FAQ What materials is this insert designed for? The VCMT110304-RK4 WKK20S insert is designed primarily for cast iron applications; the WKK20S grade and Tiger·tec Silver coating are tuned to resist abrasive wear common in cast materials. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker promotes short, controlled chips, improving swarf evacuation and safety during turning; this is particularly advantageous when the process requires predictable chip control on cast iron. Which geometry advantages does the rhombic 35° offer? The rhombic 35° form balances cutting edge strength and access to concave profiles, enabling reliable performance across a range of turning feeds while supporting good surface finish due to the 0.4 mm nose radius. Is the insert compatible with standard VCMT holders? Yes, the VCMT110304-RK4 form factor is compatible with toolholders that accept VCMT inserts; proper clamping and holder condition are essential to achieve the specified performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product from the manufacturer Walter Tools.
VCMT110304-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the RM4 chipbreaker for robust chip control and extended tool life; order the insert directly via Metav Werkzeuge or contact the consultants for tailored advice. VCMT110304-RM4 WMP20G turning insert — rhombic 35°, 0.4 mm corner radius by Walter Tools VCMT110304-RM4 WMP20G is an indexable turning insert designed for reliable machining of stainless steels in medium to robust conditions Tiger·tec Gold coating for longer tool life RM4 chipbreaker for controlled chip formation Rhombic 35° form with 0.4 mm corner radius Optimised for stainless steels (M group) High-performance coating and material pairing for consistent productivity The combination of the Tiger·tec Gold technology and a coated carbide substrate delivers a stable cutting edge under demanding conditions. This pairing promotes cutting-edge stability and improved wear resistance, which translates into fewer tool changes and steadier cycle times. For operations that prioritise throughput, the coating supports higher cutting speeds while maintaining surface quality, so the process becomes both more efficient and more predictable. Controlled chip flow and safer turning with the RM4 geometry The RM4 chipbreaker geometry is engineered for dependable chip control, reducing the risk of long, hazardous swarf in turning operations. By guiding chips into manageable segments, the insert supports uninterrupted production and eases handling during automatic turning cycles. The rhombic profile and specific chipbreaking geometry also contribute to consistent tool engagement, which helps to maintain component tolerances and reduce the likelihood of rework. Geometry and dimensions that suit precision stainless-steel work With a rhombic 35° form and a 0.4 mm corner radius, the insert balances robustness and finish. The relatively small corner radius enables fine edge detail and reduces cutting forces in finishing passes, while the rhombic angle supports versatile approach strategies across a range of turning operations. This geometry is particularly suitable for applications in stainless steels, where work-hardening and built-up edge are common challenges; the insert’s design mitigates those effects for better surface quality. Grade selection and application benefits for shop-floor decision-making The WMP20G grade is a coated carbide formulation intended for the M ISO group, i.e. stainless steels, and is specified for medium to robust conditions. Its combination of substrate and coating assists in stable chip formation and a reliable cutting edge life, providing a practical balance between productivity and economy. For production environments where part consistency and reduced downtime matter, this grade supports repeatable results without excessive process tuning. Practical implications for process planners and operators Selecting this insert supports streamlined tool management: a uniform geometry across turning operations simplifies tool libraries, and the grade’s versatility reduces the need for frequent grade swaps. The insert’s features favour predictable wear patterns and enable more accurate tool life forecasting, which in turn supports production planning and cost-efficiency. For shops moving towards higher automation, the stable chip behaviour and coating resilience help maintain process integrity over longer unattended cycles. For advice on integrating Walter Tools Tiger·tec Gold inserts into a specific machining process or to place an order via Metav Werkzeuge, contact Metav Werkzeuge GmbH by e‑mail or telephone for prompt, application-oriented support Technical data Article number: VCMT110304-RM4-WMP20G-WALTER Name / designation: VCMT110304-RM4 WMP20G Manufacturer: Walter Tools Product type: Turning insert (indexable) Facts Free cutting angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 35° Insert size: 11 Thickness designation: 03 Special features Series: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: RM4 Suitable material group: stainless steels (ISO M) Tolerance class: M Execution: T FAQ What materials is this insert designed to machine? The VCMT110304-RM4 WMP20G turning insert is optimised for stainless steels (ISO group M) and performs well under medium to robust cutting conditions. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WMP20G grade enhances wear resistance and heat management, helping to extend tool life and maintain surface quality during tougher turning operations. What advantage does the RM4 chipbreaker offer? The RM4 chipbreaker provides controlled chip segmentation, reducing long swarf and improving safety and process reliability in automated and manual turning applications. Is the insert suitable for finishing passes with tight tolerances? Yes; the rhombic 35° form combined with the 0.4 mm corner radius allows for fine finishing while preserving cutting-edge stability for consistent dimensional results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
VCMT110304-RM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coated carbide, precise RM4 chip control and a compact rhombic geometry for dependable turning of rostfreiem Stahl — order directly via Metav Werkzeuge or consult our specialists for application matching. VCMT110304-RM4 WMP20S Drehwendeschneidplatte (Rhombus 35°, 7° clearance) by Walter Tools VCMT110304-RM4 WMP20S is an indexable turning insert developed for robust machining of rostfreiem Stahl, combining a high-performance coating and a dedicated chipformer for secure, repeatable results Tiger·tec Silver coating for extended tool life Optimised RM4 chipformer for reliable chip control Rhombic 35° geometry for versatile turning 7° clearance angle for secure cutting engagement Predictable cutting performance for rostfreiem Stahl The VCMT110304-RM4 WMP20S is engineered as a coated carbide indexable insert that supports consistent machining under medium to robust conditions. The Tiger·tec Silver technology provides improved resistance to adhesive wear and thermal loads, which helps to maintain a stable cutting edge during longer cycles. The integrated RM4 chipformer promotes controlled chip formation when turning materials in ISO group M, reducing the risk of built-up edge and unplanned interruptions. By prioritising process reliability and tool life, this solution contributes directly to measurable productivity gains on turning centres. Better surface finish and reduced machining times A rhombic 35° nose and a small 0.4 mm corner radius offer a balance between versatility and surface quality: the geometry supports both light finishing passes and deeper material engagement without sacrificing stability. The positive cutting angle and the 7° clearance reduce cutting forces, which often leads to lower spindle load and more consistent part dimensions. For operations where cycle time and repeatability are critical, this insert’s design can shorten set-up iterations and minimise tool-change frequency, supporting an improved cost-per-part calculation in series production. Practical guidance for tool selection and application For turning rostfreiem Stahl, matching insert geometry and grade to workpiece condition is essential. The WMP20S grade is a coated carbide developed for these materials and designed to handle heat and adhesion tendencies typical of rostfreiem Stahl; this means improved chip control and longer edge life compared with uncoated alternatives. When specifying holders and cutting parameters, consider the insert’s RM4 chipformer and rhombic angle to choose feeds and speeds that encourage segmented, manageable chips. For bespoke recommendations on feeds, speeds or toolholder pairing, technical consultation is available to ensure the component meets production targets. Discuss tailor-made machining solutions with Metav Werkzeuge: request technical matching, availability and delivery options for the Walter Tools VCMT110304-RM4 WMP20S insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCMT110304-RM4-WMP20S-WALTER Label: Drehwendeschneidplatte VCMT110304-RM4 WMP20S Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger-tec Silver Grade: WMP20S Facts Relief (clearance) angle: 7° Corner radius: 0.4 mm Insert size: 11 Thickness designation: 03 Special features Coating technology: Tiger·tec Silver Chipformer: RM4 Geometry: Rhombus 35° Material group suitability: rostfreiem Stahl (ISO M) FAQ Which materials is this insert intended for? The VCMT110304-RM4 WMP20S insert is intended primarily for rostfreiem Stahl, corresponding to ISO material group M, and is optimised for the challenges those alloys present. What are the key geometry values for this insert? VCMT110304-RM4 WMP20S features a rhombic 35° form, a corner radius of 0.4 mm and a relief angle of 7°, offering a versatile balance between finishing and more robust turning tasks. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the VCMT110304-RM4 WMP20S improves wear resistance and thermal stability, which helps preserve edge integrity and extend tool life under higher temperatures typical of rostfreiem Stahl machining. Is the RM4 chipformer suitable for continuous and intermittent cuts? The RM4 chipformer integrated in VCMT110304-RM4 WMP20S is designed to promote consistent chip formation across varying engagement conditions, making it suitable for a range of continuous and semi-interrupted turning operations. What production advantages can be expected from using this insert? Using the VCMT110304-RM4 WMP20S insert typically yields better process security, fewer tool changes and improved surface quality on rostfreiem Stahl, contributing to steady cycle times and more predictable output. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
VCMT110304-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Benefit from the combination of a heat-resistant Tiger·tec Silver coating and the RM4 chipbreaker for reliable chip control and extended tool life; this supports consistent turning results in demanding materials. Order the insert directly via Metav Werkzeuge or consult our technical team for process recommendations. VCMT110304-RM4 WSM10S turning insert — Rhombic 35°, 0.4 mm nose radius | Walter Tools VCMT110304-RM4 WSM10S is a coated carbide turning insert engineered for robust machining of rostfreier Stahl and high-temperature alloys in demanding turning applications Tiger·tec Silver coated carbide grade WSM10S RM4 chipbreaker for stable chip control Rhombic 35° geometry for versatile turning Optimised for rostfreier Stahl and superalloys Stable cutting in demanding materials The WSM10S grade within the Tiger·tec Silver series provides a coated carbide chemistry optimised for heat resistance and edge stability. Used for machining rostfreier Stahl and nickel‑based alloys, this grade reduces the risk of built-up edge and improves tool life under high thermal load. The combination of coating and carbide microstructure supports predictable wear behaviour, which in turn reduces unexpected downtime and contributes to a steady production flow. Reliable chip control and surface consistency The integrated RM4 chipbreaker is designed to produce short, controllable chips even at higher depths of cut, which directly improves safety and machine uptime. Paired with a stable cutting edge, the insert delivers consistent surface quality and repeatable results across components. For production environments where reproducibility and low scrap rates matter, this geometry and chip control concept provides tangible process benefits without complex adjustments. Geometry that broadens application and access The rhombic 35° shape with a 0.4 mm nose radius and 7° clearance enables access to a range of turning tasks from finishing to medium cutting, offering a balance between precision and robustness. The relatively small nose radius enhances surface finish potential while the geometry supports secure clamping in standard toolholders. This makes the insert well suited to mixed-production shops seeking a versatile option that handles fine tolerances and occasional interrupted cuts. Practical guidance for integration and use Material designation S / M signals suitability for heat‑resistant superalloys (S) and rostfreier Stahl (M) according to ISO groupings; this simplifies tooling selection when material data is known. The insert’s tolerance class M and execution T ensure compatibility with common turning toolholders. For optimised cutting data and feed‑speed settings tailored to specific machines and workpieces, Metav Werkzeuge’s consultants can provide application‑matched recommendations to achieve the best balance of productivity and tool life. For process recommendations or specific cutting data for the VCMT110304-RM4 WSM10S turning insert from Walter Tools, contact Metav Werkzeuge for tailored advice and fast supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: VCMT110304-RM4-WSM10S-WALTER Product type: Turning insert (indexable) ISO designation: VCMT110304-RM4 WSM10S Series: Tiger·tec Silver Grade: WSM10S Facts Shape: Rhombus 35° Size: 11 Thickness code: 03 Nose radius: 0.4 mm Clearance angle: 7° Tolerance class: M Special features Chipbreaker: RM4 Suitable material groups: S / M Execution: T Manufacturer: Walter Tools Application focus: rostfreier Stahl and heat‑resistant superalloys FAQ What materials is this insert suitable for? The VCMT110304-RM4 WSM10S insert is specified for material groups S and M, making it suitable for heat‑resistant superalloys and rostfreier Stahl in turning applications. How does the RM4 chipbreaker affect production? RM4 provides controlled, short chips that improve process stability and reduce interruptions; the RM4 chip control supports consistent surface finish when using the WSM10S grade. What benefit does the Tiger·tec Silver coating offer? The Tiger·tec Silver coating increases thermal resistance and edge strength, extending tool life and maintaining cutting performance under higher temperatures. Which toolholder type is recommended for this geometry? The rhombic 35° shape and execution T are compatible with standard turning toolholders designed for VCMT‑style inserts; check holder clamping geometry for secure seating. Is this insert suitable for interrupted cuts or heavy roughing? The combination of the WSM10S grade and RM4 chipbreaker offers robustness for mixed operations; for heavy roughing, consult Metav Werkzeuge for optimised parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of the brand Walter Tools serves explanation purposes only; the offered item is an original, factory‑new product from the manufacturer.
VCMT110304-RM4 WSM20S T Wendeplatten - Walter Tools
Take advantage of high process security and consistent tool life through the combination of Tiger·tec Silver coating and the RM4 chipbreaker; benefit from stable chip control when machining tough alloys and stainless steel. Order directly via Metav Werkzeuge or consult the team for application support. VCMT110304-RM4 WSM20S turning insert by Walter Tools — Rhombus 35°, RM4 chipbreaker VCMT110304-RM4 WSM20S is an indexable turning insert designed for productive machining of stainless steel and heat-resistant superalloys, offering a balanced edge for secure chip formation and long tool life Tiger·tec Silver coating for heat resistance Optimised RM4 chipbreaker for stable chips Rhombic 35° form for versatile turning 0.4 mm corner radius with 7° relief Achieve reliable productivity on stainless steel and superalloys The combination of the WSM20S grade and the Tiger·tec Silver series delivers a cutting geometry engineered for stable chip formation and heat resistance when machining challenging materials. The insert’s RM4 chipbreaker supports predictable chip flow, reducing interruptions and complementing modern turning cycles. Because the grade targets both M and S workpiece groups, the insert reduces the need for frequent tool changes in mixed production runs, enabling higher uptime and a smoother production flow. Geometry that ensures consistent surface finish and edge security The Rhombus 35° form and a 0.4 mm corner radius create a versatile cutting edge suited to a wide range of turning tasks, from finishing to general profiling. The 7° relief reduces rubbing on the flank face, improving surface integrity and extending edge life. Tolerance class M contributes to reproducible positioning in toolholders and consistent part-to-part performance, which supports predictable machining results and less rework. Practical selection criteria and process benefits This insert is specified for workpiece groups S and M (heat‑resistant superalloys/titanium and stainless steel), which means selection focuses on heat resistance and edge stability rather than only hardness. The coated carbide grade WSM20S uses a modern coating technology to manage thermal load and maintain a robust cutting edge under elevated temperatures. For workshop planning, choosing this insert reduces scrap risk on demanding materials and simplifies inventory by covering multiple machining scenarios. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools inserts like the VCMT110304-RM4 WSM20S and for expert assistance by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: VCMT110304-RM4-WSM20S-WALTER Name: Drehwendeschneidplatte VCMT110304-RM4 WSM20S Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Core data Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Corner radius: 0,4 Relief angle: 7° Tolerance class: M Special features Chipbreaker: RM4 Material suitability: S / M Suitable for stainless steel: true Execution: T Base designation: VCMT110304-RM4 FAQ What materials is this insert suitable for? The VCMT110304-RM4 WSM20S insert is suitable for material groups S and M, specifically heat‑resistant superalloys, titanium and stainless steel. What does the RM4 chipbreaker provide? The RM4 chipbreaker on this insert promotes stable chip control and predictable chip flow, improving process reliability during continuous turning operations. How does the Tiger·tec Silver series benefit machining? The Tiger·tec Silver coating enhances heat resistance and edge stability, helping to maintain cutting performance when machining demanding materials. Which geometry suits finishing versus medium cuts? The Rhombus 35° form with a 0.4 mm corner radius suits versatile turning tasks; finer radii favour finishing, while the form and chipbreaker support medium cutting as well. Is the insert compatible with standard toolholders? The insert follows standard indexable insert dimensions (VCMT110304-RM4 family), offering compatibility with toolholders designed for this format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT110304-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, a stable RM4 chipbreaker and precise 35° geometry for reliable machining of stainless steel and heat‑resistant alloys; order the VCMT110304‑RM4 WSM30S inserts directly via Metav Werkzeuge or request application advice from our consultants. VCMT110304-RM4 WSM30S turning insert — Tiger·tec Silver, RM4 chipbreaker (Walter Tools) VCMT110304-RM4 WSM30S is a coated turning insert designed for secure chip control and long edge life when machining stainless steel and heat‑resistant superalloys Tiger·tec Silver coating for robust edge life Optimised RM4 chipbreaker for stable chips Rhombic 35° geometry for versatile turning Suitable for stainless steel and superalloys Consistent performance in demanding materials The VCMT110304‑RM4 WSM30S insert combines a Tiger·tec Silver coating with a coated carbide substrate to deliver sustained performance when turning materials that generate heat and strain the cutting edge. The grade WSM30S is formulated for stainless steel and high‑temperature alloys, promoting secure chip formation where workpiece ductility and built‑up edge are typical challenges. The RM4 chipbreaker is engineered to stabilise chips under interrupted or continuous cuts, which reduces tool‑holder vibration and contributes to predictable machining cycles. This results in fewer unplanned tool changes and improved process reliability for production environments. Geometry engineered for surface quality and flexibility The insert’s Rhombic 35° form and a 0.4 mm corner radius offer a balanced compromise between strength and finish capability. A 7° clearance angle reduces rubbing while maintaining cutting stability, which is particularly beneficial during semi‑finishing passes. The compact insert size and profile enable access to a variety of turning tasks, including light profiling and shoulder work, with the RM4 chipbreaker optimised to produce short, controllable chips that are easier to evacuate from the cut. For shops aiming to combine repeatable surface quality with efficient chip handling, this geometry supports consistent results across batch production. Process security, economics and tool life Delivered within the Tiger·tec Silver series, the insert benefits from a coating system that enhances thermal resistance and protects the cutting edge against abrasion and adhesion. The combination of coated carbide and a tailored chipbreaker reduces the rate of edge deterioration, improving cycle time efficiency and lowering total machining cost per component. Walter Tools’ manufacturing standards and the insert’s microgeometry ensure reproducible cutting performance, making it suitable for setups where minimised downtime and stable tool life are priorities. For production lines machining stainless steel or nickel‑based alloys, the insert provides a technically sound choice that supports predictable component quality. Contact Metav Werkzeuge for application advice and stock information on Walter Tools Tiger·tec Silver inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCMT110304-RM4-WSM30S-WALTER Description: VCMT110304-RM4 WSM30S turning insert Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Insert form: Rhombus 35° Insert size: 11 Thickness code: 03 Special features Series: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: RM4 Application: stainless steel, heat‑resistant superalloys Suitable for hard‑to‑machine materials and stainless applications FAQ What materials is this insert best suited for? The VCMT110304‑RM4 WSM30S insert is intended for stainless steel and heat‑resistant superalloys, with the WSM30S grade optimised to support secure chip formation and thermal resistance in such materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker produces short, controlled chips and promotes stable cutting, which helps to reduce tool‑holder vibration and supports consistent surface finish during turning operations. Is the Rhombic 35° geometry suitable for finishing? Yes; the Rhombic 35° form combined with a 0.4 mm corner radius provides a balance between edge strength and achievable surface quality, making it suitable for semi‑finishing and finishing passes where access permits. Does the Tiger·tec Silver coating extend tool life? The Tiger·tec Silver coating increases thermal resistance and abrasion protection of the coated carbide substrate, which contributes to longer edge life and more predictable performance in demanding cutting conditions. Can this insert be used for titanium machining? The WSM30S grade is developed for heat‑resistant alloys and, depending on tool geometry and process parameters, can be applied to titanium and similar difficult‑to‑machine materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation or partnership implied between our company and the mentioned brands. The offered article is original, brand‑new merchandise from the stated manufacturer.
VCMT110304-RP4 WPP10G - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, precise 35° rhombic geometry and consistent RP4 chip control for stable productivity in steel turning; order the VCMT110304-RP4 WPP10G directly via Metav Werkzeuge or consult our technical team for process setup. VCMT110304-RP4 WPP10G – Indexable turning insert, Tiger·tec Gold coating, for steel by Walter Tools The VCMT110304-RP4 WPP10G is an indexable turning insert designed for steel machining, combining a Tiger·tec Gold coated carbide grade with a 35° rhombic form to deliver consistent chip formation and extended tool life. Tiger·tec Gold coated for long tool life Rhombic 35° geometry for precision turning 7° clearance angle for reduced cutting forces Suitable for steel machining, reliable chip control Higher throughput through a wear‑resistant coated grade The combination of the Tiger·tec Gold coating and the WPP10G grade creates a high‑performance coated carbide suitable for continuous production. The advanced coating reduces flank wear and improves resistance to abrasive conditions commonly encountered in steel turning, which translates into longer intervals between index changes and fewer unplanned tool interventions. This results in measurable gains in cycle time and consistent part quality when machining P‑group steels according to ISO classifications. Geometry engineered for stable chip control and surface quality The 35° rhombic insert geometry and the finely defined 0.4 mm corner radius work together with the RP4 chipbreaker to produce short, controllable chips and a steady cutting force profile. The moderate cutting edge radius supports repeatable dimensional results while the 7° clearance angle reduces rubbing on the flank, lowering heat generation and improving surface finish. These geometric choices help maintain process stability during medium to finishing cuts on common steel grades. Optimised for steel applications with balanced toughness and wear resistance Specifically formulated for the ISO P material group, the grade allocation emphasises a balance between wear resistance and toughness to handle typical heat and chip formation in steel turning. The specification highlights zones of wear resistance and universal performance, making the insert a reliable option across a broad spectrum of unalloyed and alloyed steels. The result is predictable tool life and repeatable workpiece quality across batch sizes. Practical integration into production and tool systems With the VCMT110304-RP4 geometry available in size 11 and thickness code 03, the insert fits standard indexable toolholders for rhombic 35° inserts and class M tolerances for consistent seating and repeatability. The design supports quick index changes, minimises downtime and contributes to reduced tooling inventory by offering a versatile grade that covers a wide material range. Compatibility with established clamping systems ensures straightforward adoption without complex retooling. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools inserts and assistance integrating the VCMT110304-RP4 WPP10G into the production process, including cutting data and toolholder matching Technical data SKU: VCMT110304-RP4-WPP10G-WALTER Label: Drehwendeschneidplatte VCMT110304-RP4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade: WPP10G Series: Tiger‑tec Gold Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombus 35° Size designation: 11 Thickness code: 03 Tolerance class: M Special features Coated carbide grade (Tiger·tec Gold) Chipbreaker type: RP4 Material group application: Steel (ISO P) Execution: T ISO designation: VCMT110304-RP4 WPP10G FAQ What materials is this insert intended for? The VCMT110304-RP4 WPP10G is specified for the ISO P material group and is optimised for turning various unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP10G grade enhances wear resistance and thermal stability, extending the effective cutting life of the insert under typical steel turning conditions. What role does the RP4 chipbreaker play? The RP4 chipbreaker produces short, controlled chips and supports consistent chip evacuation, contributing to improved surface finish and predictable cutting forces when using the insert. Which toolholders are compatible with the rhombic 35° insert form? Standard toolholders designed for rhombic 35° indexable inserts accept this geometry and allow correct clamping and repeatable positioning of the VCMT110304-RP4 WPP10G. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius provides a good compromise between edge strength and the ability to achieve fine surface finishes in medium to finishing passes. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the referenced brands. The offered item is an original, factory‑new product of the respective manufacturer.
VCMT110304-RP4 WPP20G RP4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, precise RP4 chip control and a rhombic 35° geometry for efficient, repeatable steel turning. Order the indexable insert directly via Metav Werkzeuge or ask the consultants for application support. VCMT110304-RP4 WPP20G — rhombic 35° turning insert, Tiger·tec Gold (Walter Tools) The VCMT110304-RP4 WPP20G is a rhombic 35° indexable turning insert engineered for high-productivity steel machining; its coated-carbide grade provides consistent edge stability and a balance of wear resistance and toughness. Tiger·tec Gold coated carbide grade WPP20G Optimised RP4 chipbreaker for steel machining Rhombic 35° geometry with 7° clearance 0.4 mm corner radius for reproducible edge life Longer tool life and reliable cutting performance for steel turning The coated-carbide WPP20G grade is tailored for common steel machining tasks, combining a wear-resistant coating with a substrate that maintains toughness under thermal load. This pairing reduces flank wear and extends service intervals, resulting in fewer tool changes and improved machine uptime. The Tiger·tec Gold technology is designed to manage heat at the cutting edge, so consistent dimensional accuracy is achieved across medium-duty to demanding operations. Predictable chip control and surface finish through optimised geometry The insert’s RP4 chipbreaker facilitates controlled swarf formation when machining steel, lowering the risk of long, entangling chips and helping to maintain a stable cutting zone. A controlled chip flow leads directly to more consistent surface quality and reduces secondary operations. For operators less familiar with chipbreaker design: the RP4 profile shapes the chip to break into smaller, manageable segments while preserving cutting-edge strength. Practical geometry that eases process planning The rhombic 35° shape with a 7° clearance angle provides a versatile approach angle suited to both roughing and finishing passes. The 0.4 mm corner radius balances strength and form accuracy: larger radii improve edge life under heavy engagement, while this medium radius still allows precise profiles without excessive cutting forces. Such geometry simplifies tool selection across varying cycle types, reducing inventory complexity. Shop-floor compatibility and handling advantages With the industry-standard VCMT designation and compact plate size, mounting, indexing and stock management integrate smoothly into existing toolholders and tool families. The coated grade’s broad suitability for steel means one insert variant can service multiple workpiece types, supporting efficient tool setting and lower tool-change frequency. Walter Tools’ focus on stable edge performance supports predictable process windows for production environments. For reliable, versatile steel turning using Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored application advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: VCMT110304-RP4-WPP20G-WALTER Article designation: VCMT110304-RP4 WPP20G Product type: Turning indexable insert (drehwendeschneidplatte) Facts Geometry: Rhombic 35° Clearance (relief) angle: 7° Corner radius: 0.4 mm Plate size: 11 Plate thickness: 03 Tolerance class: M Special features Coating/grade: Tiger·tec Gold, WPP20G (coated carbide) Chipbreaker: RP4 Substrate application group: P (steel) Series: Tiger-tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The VCMT110304-RP4 WPP20G is specified for steel applications (ISO group P); the WPP20G grade and RP4 chipbreaker are tuned for typical steel heat and chip behaviour. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this Walter Tools insert shapes chips to break reliably during turning, improving surface finish consistency and easing chip evacuation in steel machining. Which cutting conditions suit the WPP20G grade? WPP20G (Tiger·tec Gold) performs across a range of cutting speeds and feeds for steel, offering a balance of wear resistance and toughness for both medium and heavier cuts. Can the insert be used for finishing passes? Yes — the rhombic 35° geometry and 0.4 mm corner radius provide controlled engagement that supports finishing where dimensional accuracy and surface quality are required. Is the VCMT110304-RP4 compatible with standard toolholders? The VCMT format matches common turning toolholder families; standard clamping and indexing procedures apply for this plate size. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools serves informational purposes only and does not imply any affiliation or endorsement.
VCMT110304-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the RP4 chipbreaker and a rhombic 35° geometry for stable, productive steel turning; order or request advice via Metav Werkzeuge to integrate this insert into serial production. VCMT110304-RP4 VCMT110304-RP4 WPP30G WPP30G — Indexable turning insert for Steel — Walter Tools A VCMT110304-RP4 WPP30G indexable turning insert designed for robust steel machining, featuring Tiger·tec Gold coating and an RP4 chipbreaker for consistent chip control. Tiger·tec Gold coated carbide grade Optimised RP4 chipbreaker for steel Rhombic 35° geometry for stable cuts 7° clearance with 0.4 mm nose radius Delivering reliable chip control for efficient steel turning The coated carbide grade provides a predictable cutting behaviour when machining steel (ISO P). The RP4 chipbreaker is engineered to produce short, controlled chips under typical turning conditions, reducing the risk of workpiece damage and minimising machine downtime. This means more stable feeds and the possibility of slightly higher material removal rates without compromising surface finish. For production environments seeking measurable productivity gains, the insert’s combination of grade and chip control translates into fewer interruptions and more consistent cycle times. Longer tool life and consistent edge performance from Tiger·tec Gold The WPP30G grade within the Tiger·tec Gold family delivers wear resistance balanced with toughness, which helps maintain cutting-edge integrity in continuous turning operations. Coated carbide – a hard substrate with a wear-resistant top layer – delays flank wear and reduces notch formation on the cutting edge; this results in longer service intervals and fewer insert changes. The tolerance class M supports repeatable seating and predictable interchangeability in toolholders, aiding process stability and lowering setup variability across production batches. Geometry that balances strength, accessibility and surface quality The rhombic 35° shape provides a favourable compromise between cutting-edge strength and tool access in tight geometries. A 7° clearance reduces rubbing on the flank while a 0.4 mm nose radius helps to achieve a consistent surface finish without demanding overly conservative feeds. The insert’s profile and the choice of WPP30G make it particularly suited to general engineering steels where a balance of economy and performance is required. In practice, this leads to fewer rejects and a smoother path from roughing to finishing when machining on lathes or turn-mill centres. Designed for repeatable results in production workflows The insert’s ISO designation and format allow straightforward integration into existing tool systems. With its VCMT110304-RP4 geometry and thickness code, the component fits commonplace clamping solutions, simplifying inventory and reducing the need for specialised holders. The overall effect is a more predictable machining process: stable cutting forces, controlled chip form and extended edge life contribute to lower total machining costs and a more reliable production output. For tailored recommendations on using Walter Tools’ Tiger·tec Gold grade in steel turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and ordering support Technical Data Article number: VCMT110304-RP4-WPP30G-WALTER Name: Indexable turning insert VCMT110304-RP4 WPP30G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP30G Product type: Indexable turning insert Facts Clearance angle: 7° Nose radius: 0.4 mm Insert form: Rhombic 35° Insert size: 11 Thickness code: 03 Tolerance class: M Special features Chipbreaker: RP4 Coating/technology: Tiger·tec Gold (coated carbide) Material application: Steel (ISO P) Execution: T ISO designation: VCMT110304-RP4 WPP30G FAQ What materials is this insert intended for? The VCMT110304-RP4 WPP30G insert is intended primarily for steel (ISO P) applications; the WPP30G grade is tuned for the heat and chip behaviour typical when turning unalloyed and alloyed steels. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker promotes short, manageable chips in turning operations, improving chip evacuation and reducing the chance of surface damage during steel machining with the Walter Tools insert. What does the Tiger·tec Gold coating provide? Tiger·tec Gold offers a hard, wear-resistant layer on the insert’s carbide substrate; this combination increases wear resistance while maintaining sufficient toughness for continuous production use. Is the insert suitable for finishing passes? Yes; with a 0.4 mm nose radius and rhombic geometry, the insert can deliver reliable surface quality in finishing operations when cuts and feeds are set appropriately. Does the tolerance class M influence setup? Tolerance class M supports consistent seating and repeatable positioning in standard toolholders, which aids set-up speed and process reproducibility. Manufacturer: Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are used for explanatory purposes only. The offered item is an original, factory-new product of the manufacturer.
VCMT110308-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of a wear-resistant coated carbide grade and a dedicated RK4 chipbreaker to ensure stable, repeatable results when machining abrasive cast iron. The combination of Tiger·tec Silver technology, a rhombic 35° geometry and a 0.8 mm corner radius supports productive material removal and consistent edge life — order via Metav Werkzeuge or contact their consultants for application guidance. VCMT110308-RK4 WKK10S turning insert – Tiger·tec Silver, for cast iron (Walter Tools) The VCMT110308-RK4 WKK10S is an indexable turning insert designed for efficient machining of cast iron, combining a coated carbide grade with a tailored chipbreaker and a compact rhombic geometry. Tiger·tec Silver coated carbide for durability Optimised RK4 chipbreaker for cast iron Rhombic 35° geometry for universal turning 0.8 mm corner radius for robust edge strength Durable grade for abrasive cast iron turning The cutting grade is WKK10S, part of the Tiger·tec Silver family, a coated carbide solution optimised for the abrasive wear and short, brittle chips typical of cast iron. This specification delivers enhanced resistance to flank and crater wear, which translates into longer tool life and fewer index changes. For production environments where uptime and repeatability matter, the combination of a wear-resistant coating and a carbide substrate enables consistent component quality and reduced tooling costs over extended runs. Geometry and edge design that improve chip control A rhombic 35° insert form together with the RK4 chipbreaker provides controlled fragmentation of cast-iron chips and reliable evacuation from the cutting zone. The moderate 35° approach angle balances cutting force and surface finish, while the 0.8 mm corner radius gives a stable cutting edge that tolerates interrupted cuts and modest feed variations. These design choices lower the risk of edge chipping and help maintain dimensional stability, particularly when turning sections with varied cross-sections or interrupted surfaces. Practical compatibility and workshop benefits The insert’s dimensions and tolerance class support straightforward integration into standard toolholders and clamping systems. With a compact inscribed circle and a practical thickness, this indexable insert suits many common turning applications in cast iron machining. Combined with Walter Tools’ quality control and predictable tolerance class M, the insert helps reduce setup time and supports reliable process repeatability on CNC lathes and turning centres. For operators who value predictable tool life and consistent surface quality, this cutting grade offers a pragmatic balance of performance and economy. Contact Metav Werkzeuge today for tailored application advice on Walter Tools turning inserts — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: VCMT110308-RK4-WKK10S-WALTER Designation: VCMT110308-RK4 WKK10S Type: Turning insert (indexable) Brand: Walter Tools Series: Tiger·tec Silver Facts Inscribed circle: 11 mm Thickness: 3.0 mm Relief angle: 7° Corner radius: 0.8 mm Tolerance class: M Special features Grade: WKK10S (coated carbide) Chipbreaker: RK4 Geometry: Rhombic 35° Application: cast iron (ISO K) Execution: T FAQ What materials is this insert intended for? The VCMT110308-RK4 WKK10S from Walter Tools is designed primarily for machining cast iron (ISO K), with the grade and chipbreaker tuned for abrasive ferritic and grey iron types. How does the RK4 chipbreaker affect performance? The RK4 chipbreaker on this insert promotes controlled chip fragmentation for cast iron, improving evacuation and reducing the risk of chip-related surface damage when using the VCMT110308-RK4 WKK10S. Can this insert be used for finishing or roughing operations? With a 0.8 mm corner radius and a rhombic 35° geometry, the insert suits general-purpose turning; selecting feeds and depths of cut will determine whether it is used for finishing or more aggressive material removal. Is the Tiger·tec Silver coating beneficial for production runs? Yes — the Tiger·tec Silver technology applied to the WKK10S grade enhances wear resistance and edge stability, supporting longer cycles between index changes and consistent performance in production. What tolerance and fit can be expected? The insert is supplied to tolerance class M, ensuring consistent seat fit and repeatable positioning in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation with our company. The offered article is an original, factory-new product of the manufacturer Walter Tools.
VCMT110308-RK4 WKK20S RK4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, an RK4 chipbreaker for reliable chip control and a 0.8 mm corner radius that supports consistent component quality; order the insert directly via Metav Werkzeuge or ask our consultants for application support. VCMT110308-RK4 WKK20S indexable turning insert — RK4 chipbreaker, Tiger‑tec Silver for cast iron · Walter Tools The VCMT110308-RK4 WKK20S is an indexable turning insert engineered for productive machining of cast iron components, combining a Rhombic 35° geometry with a chipbreaker tuned to brittle, short-turning chips. Tiger‑tec Silver coating RK4 chipbreaker for controlled chips Rhombic 35° geometry for flexible tool set-up 0.8 mm corner radius, tolerance class M Increase productivity on cast iron components The combination of a Tiger‑tec Silver coating and the RK4 chipbreaker delivers a pragmatic performance advantage when turning cast iron. The coated carbide grade provides improved wear resistance against the abrasive nature of cast materials, while the RK4 geometry shapes short, repeatable chips that reduce downtime from chip entanglement. For production environments this means a measurable increase in cycle stability and fewer interruptions for machine cleaning or reloading, supporting efficient batch throughput. Achieve consistent surface finish and predictable tool life A 0.8 mm corner radius and tolerance class M ensure repeatable edge strength and dimensional reliability. The moderate radius reduces the risk of edge chipping during interrupted cuts typical for cast iron workpieces, while the tolerance class supports accurate seat fitment and consistent cutting engagement. These technical choices translate directly into two practical benefits: a stable surface quality on finished parts and longer predictable performance per insert change, lowering overall machining costs. Clear geometry and sensible handling for mixed‑fleet tooling The Rhombic 35° form offers flexibility in toolholder setup and allows straightforward integration into existing turning tool families. The insert’s size and thickness codes conform to common system standards, simplifying inventory management and replacement. Its designation and grade are optimised specifically for the ISO K group, so tool selection is straightforward for cast iron applications and reduces the guesswork in mixed‑material production environments. For specification assistance, volume enquiries or to secure supply of Walter Tools inserts such as the VCMT110308-RK4 WKK20S, contact Metav Werkzeuge for tailored technical advice and reliable delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: VCMT110308-RK4-WKK20S-WALTER Designation: VCMT110308-RK4 WKK20S Manufacturer: Walter Tools Product type: indexable turning insert Series: Tiger‑tec Silver Facts Free angle: 7° Corner radius: 0.8 mm Plate size: 11 Plate thickness code: 03 Tolerance class: M Special features Grade: WKK20S Chipbreaker: RK4 Geometry: Rhombic 35° Coating/technology: Tiger‑tec Silver (coated carbide) Material group suitability: K (cast iron) Application focus: cast iron machining SKU / UID: VCMT110308-RK4-WKK20S-WALTER FAQ What materials is this insert intended for? The VCMT110308-RK4 WKK20S is formulated for machining cast iron (ISO group K) and is optimised for the abrasive wear and short, breaking chips common to these materials. How does the RK4 chipbreaker benefit machining? The RK4 chipbreaker controls chip shape and fragmentation when turning cast iron, reducing the risk of chip tangling and improving machine uptime. Is the grade suitable for interrupted cuts? Yes. The combination of a 0.8 mm corner radius and the coated carbide grade in the Tiger‑tec Silver family offers robust edge strength suitable for many interrupted cutting conditions. Can this insert be used in standard toolholders? The Rhombic 35° geometry and standard size coding allow integration into widely used turning toolholders, simplifying swaps and inventory handling. What distinguishes the Tiger‑tec Silver series in daily use? Tiger‑tec Silver provides enhanced wear resistance and thermal stability for demanding metalcutting tasks, which contributes to consistent performance and reduced insert consumption. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer. Walter Tools is referenced as the brand of the product listed.
VCMT110308-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with an RM4 chipbreaker delivers stable cutting edges and improved chip control for machining stainless steel. The rhombic 35° geometry with a 0.8 mm corner radius and 7° clearance supports robust turning under medium to heavy conditions. Order the insert directly via Metav Werkzeuge or request application advice from their consultants. VCMT110308-RM4 WMP20G Turning indexable insert for stainless steel — Walter Tools, Tiger·tec Gold The VCMT110308-RM4 WMP20G is a rhombic 35° turning insert engineered for consistent chip formation and reliable edge stability when machining stainless steel in medium to robust conditions. Tiger·tec Gold coating for long life Optimised RM4 chipbreaker for stable chips Rhombic 35° insert geometry 7° clearance and 0.8 mm corner radius Longer tool life and consistent edge stability The combination of a coated carbide substrate and the Tiger·tec Gold coating provides a wear-resistant cutting edge designed to withstand the adhesive tendencies of stainless steel. Coatings of this type reduce friction at the cutting zone and slow flank wear, which supports longer tool life and more predictable component tolerances. As a result, quieter tool changes and fewer interventions in a production shift are achievable, contributing to steadier cycle times and reduced scrap rates. Reliable chip control that supports process security The RM4 chipbreaker is optimised for the demands of stainless steels, promoting short, controllable chips and reducing the risk of built-up edge. Combined with the rhombic 35° geometry, the insert permits stable entry angles and effective clearance management; the 7° shear clearance minimises rubbing while the 0.8 mm corner radius balances edge strength with achievable surface finish. These design choices ease parameter selection and help maintain consistent surface quality even under varying cutting conditions. Seamless integration into production tooling Marked as VCMT110308-RM4 WMP20G, the insert is compatible with standard toolholders designed for VCMT-style rhombic inserts, enabling straightforward stocking and quick indexation. The tolerance class M and the grade designation WMP20G reflect suitability for stainless steel under medium to robust applications, supporting reproducible results across serial production. Specifying this insert helps standardise processes and aligns with quality assurance measures that value repeatability and predictable tool life. For reliable machining of stainless steel choose Walter Tools' Tiger·tec Gold inserts — contact Metav Werkzeuge for tailored application advice or availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VCMT110308-RM4-WMP20G-WALTER Designation: VCMT110308-RM4 WMP20G Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 0.8 mm Clearance angle: 7° Plate size: 11 mm Thickness code: 03 Tolerance class: M Special features RM4 chipbreaker Rhombic 35° plate form Grade: WMP20G Coated carbide Suitable for stainless steel applications Execution: T Series: Tiger·tec Gold FAQ What materials is this insert suited for? The VCMT110308-RM4 WMP20G is specified for stainless steel and performs well under medium to robust turning conditions due to its Tiger·tec Gold grade and optimised chip control. How does the RM4 chipbreaker help in production? The RM4 chipbreaker on the Walter Tools insert promotes short, controlled chips, which reduces handling issues and supports safer, more consistent machining cycles. What are the key geometry advantages of this insert? The rhombic 35° form with a 0.8 mm corner radius and 7° clearance balances edge strength and surface finish, enabling stable cutting and simplified parameter selection for stainless steels. Is this insert compatible with standard VCMT toolholders? Yes, the VCMT110308-RM4 WMP20G conforms to VCMT dimensions and is intended for standard toolholder systems that accept rhombic 35° turning inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Brand names and trademarks mentioned are the property of their respective owners and are used here for explanatory purposes only. The offered item is an original, factory-new product of the manufacturer.
VCMT110308-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Benefit from a combination of Tiger·tec Silver coating, the RM4 chipbreaker and a 7° relief angle for dependable chip control and extended tool life. Order or request tailored cutting data directly via Metav Werkzeuge when process reliability and repeatable results are required. VCMT110308-RM4 WSM20S – Turning indexable insert, Tiger·tec Silver, Rhombus 35° | Walter Tools The VCMT110308-RM4 WSM20S is a rhombic 35° turning insert designed for machining stainless steels and heat-resistant superalloys with reliable chip control and high edge stability. Tiger·tec Silver coated carbide grade WSM20S RM4 chipbreaker for controlled chip formation Optimised for stainless steels (ISO M) Rhombic 35° shape with 0.8 mm corner radius Relief angle 7° for robust cutting edges Stable chips and longer tool life for difficult materials The combination of the RM4 chipbreaker and the Tiger·tec Silver coating delivers stable chip formation and consistent cutting behaviour when machining materials that tend to work-harden or produce stringy chips. The chipbreaker promotes short, controllable chips which reduce the risk of re-cutting and protect the machine‑tool environment. As a result, the insert supports longer tool life and fewer interruptions in continuous production, translating into measurable process efficiency and lower overall machining cost. Geometry and edge preparation optimised for stainless and superalloys Built with a Rhombus 35° profile and a 0.8 mm corner radius, this insert balances edge strength and access for moderate‑depth turning operations. The relief angle of 7° improves edge shear strength while reducing rubbing and built-up edge on stainless steels (ISO M) and superalloys/titanium (ISO S). The insert’s tolerance class M ensures consistent fit and repeatable seating in clamping systems, supporting stable cutting parameters and predictable surface quality across batches. Process benefits, handling and predictable performance The insert format VCMT110308‑RM4 is suitable for standard toolholders and offers straightforward indexability for fast tool changes. The WSM20S grade, part of the Tiger·tec Silver family, is a coated carbide developed to withstand thermal and mechanical stresses typical of demanding stainless‑steel turning. This results in reliable edge stability, reduced downtime for tool changes and a more predictable machining window—advantages that improve component consistency and support high productivity in jobbing and serial production alike. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Silver VCMT inserts for demanding stainless turning or to request a customised cutting-data sheet and application advice Technical data SKU: VCMT110308-RM4-WSM20S-WALTER Designation: VCMT110308-RM4 WSM20S Type: Turning indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Core data Corner radius: 0.8 mm Relief angle: 7° Insert shape: Rhombus 35° Size: 11 Thickness code: 03 Tolerance class: M Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Material suitability: S / M Typical applications: stainless steels and heat‑resistant superalloys Geometry: Rhombus 35° with 0.8 mm corner radius FAQ What materials is this insert suitable for? The VCMT110308‑RM4 WSM20S is optimised for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), benefiting from the Tiger·tec Silver coating and RM4 chipbreaker. How does the RM4 chipbreaker affect machining behaviour? The RM4 chipbreaker on this Walter Tools insert produces short, controlled chips, which stabilise the cutting process and reduce the risk of built‑up edge when turning difficult materials. What does the designation VCMT110308 indicate? VCMT110308 refers to the insert geometry and size; combined with RM4 and the WSM20S grade it denotes a rhombic 35° insert with a 0.8 mm corner radius and the specified chipbreaker and carbide grade. Is the insert compatible with standard toolholders? Yes, the VCMT110308‑RM4 format complies with common turning insert holders; the tolerance class M supports repeatable seating and quick indexing. Where can tailored cutting data be obtained? Tailored cutting data and application support are available from Metav Werkzeuge; the VCMT110308‑RM4 WSM20S benefits from Walter Tools’ grade development for demanding stainless and superalloy turning. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
VCMT110308-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Reliable machining of high-strength materials is delivered through a combination of durable coated carbide, optimised chip control and consistent edge stability; benefit from improved process security and extended tool life with the VCMT110308-RM4 WSM30S from Walter Tools. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. VCMT110308-RM4 WSM30S — Turning insert (Rhombic 35°, 7° clearance) by Walter Tools A VCMT110308-RM4 WSM30S turning insert designed for demanding turning of rostfreier Stahl and heat-resistant alloys, combining the Tiger·tec Silver coating technology with an RM4 chipbreaker for steady material removal. Tiger·tec Silver coated carbide grade Optimised RM4 chipbreaker for tough materials Rhombic 35° form, 0.8 mm corner radius 7° clearance angle for reliable performance Higher productivity through tailored grade and coating The combination of the Tiger·tec Silver coating and the WSM30S grade promotes high process stability when machining challenging alloys. The coated carbide construction reduces flank wear and supports a long tool life even under elevated temperatures typical for rostfreier Stahl and superalloys. As a consequence, cycle times can be shortened and part quality remains more consistent, which benefits batch production and mixed-series machining alike. The insert’s design focuses on repeatable cutting performance and reduced down-times. Secure chip control and edge security for difficult materials Equipped with the RM4 chipbreaker and a controlled geometry, the insert provides secure chip control during interrupted cuts and continuous heavy cuts. The Rhombic 35° form and 0.8 mm corner radius combine to offer robust edge strength while maintaining good accessibility in shoulder and profiling operations. For materials that are prone to workhardening or poor heat conductivity—such as rostfreier Stahl, superalloys and titanium—the geometry helps avoid built-up edge and supports predictable machining behaviour, improving surface integrity and reducing rework. Practical implications for shop-floor use and process planning The slim clearance of 7° contributes to a stable cutting angle and reduced rubbing, which supports consistent dimensional accuracy and surface finish. The insert’s thickness code and size are compatible with common toolholder systems for straightforward integration into existing turning setups. Selection of coated carbide grades like this one allows higher cutting speeds where coolant or process strategies permit, balancing efficiency and tool life. For series-sensitive production, the insert’s stable cutting edge minimises variation between components and simplifies tool-change scheduling. For optimised results with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for ordering and application support at info@metav-werkzeuge.com or call +49 2822 7131930 — technical advice and fast delivery options available Technical data SKU: VCMT110308-RM4-WSM30S-WALTER Product: Drehwendeschneidplatte / Turning insert Designation: VCMT110308-RM4 WSM30S Series: Tiger-tec Silver Manufacturer: Walter Tools Specifications Clearance angle: 7° Insert size: 11 Thickness code: 03 Corner radius: 0.8 mm Geometry: Rhombic 35° Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: RM4 Execution: T Tolerance class: M Material suitability: M (rostfreier Stahl), S (superalloys / titanium) FAQ What materials is this insert suitable for? The VCMT110308-RM4 WSM30S insert is suitable for machining rostfreier Stahl and heat-resistant superalloys, as indicated by the ISO groups M and S. Which chipbreaker does the insert use and what is its benefit? The insert features the RM4 chipbreaker, which supports secure chip control and stable cutting conditions in demanding turning applications. What does the 0.8 mm corner radius affect in practice? A 0.8 mm corner radius increases edge strength and helps maintain surface finish while providing better resistance to chipping in interrupted cuts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
VCMT110308-RP4 WPP10G RP4 Wendeplatten - Walter Tools
Take advantage of the combination of durable coating, controlled chip formation and proven geometry for productive steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for application support. VCMT110308-RP4 WPP10G indexable turning insert – Rhombus 35°, Tiger·tec Gold by Walter Tools The VCMT110308-RP4 WPP10G is an indexable turning insert designed for general steel machining, combining a Tiger·tec Gold coated carbide grade with a 35° rhombic geometry for reliable, high-productivity turning. VCMT110308-RP4 WPP10G indexable insert Tiger·tec Gold coating for extended tool life Rhombus 35° geometry with 7° clearance RP4 chipbreaker for controlled chip formation 0.8 mm corner radius for reliable edge strength Productive steel turning with a high-performance coating The combination of Tiger·tec Gold and a coated carbide substrate delivers a balanced mix of wear resistance and toughness. This grade, identified as WPP10G, is optimised for the thermal and mechanical demands of machining steel and is intended to keep cutting-edge condition over longer tool cycles. The coating reduces flank and crater wear, which in practice means fewer insert changes and a more continuous production flow. For operations seeking predictable life and reduced downtime, the coated grade contributes directly to improved process economy. Predictable chip control for safer, repeatable processes The RP4 chipbreaker is designed to shape chips consistently under the typical cutting conditions encountered in steel turning. Controlled chip formation reduces the risk of entanglement and promotes stable cutting forces, which supports higher feed rates and surface consistency. Explaining the term: a chipbreaker is an engineered groove on the insert face that helps break the swarf into short, manageable segments. In automated or lights-out setups this reliability in chip behaviour becomes a tangible productivity advantage. Geometry and edge design that protect the cutting edge A 35° rhombic geometry combined with a 7° clearance angle and a 0.8 mm corner radius offers a robust edge capable of handling interrupted cuts and general turning tasks. The rhombic shape provides accessible cutting corners for a variety of turning strategies while the measured corner radius balances penetration and edge strength—larger radii resist chipping, smaller radii produce finer finishes. These geometric choices help preserve dimensional accuracy and reduce vibration in many steel applications. Practical compatibility and where the insert excels This insert is intended primarily for steel (ISO P) applications and the Walter grade allocation reflects a focus on wear resistance with a measure of toughness for varied steel types. The insert designation and form factor make it suitable for standard lathe holders that accept VCMT-format inserts, enabling straightforward integration into existing toolholders. For shops requiring reproducible performance across different steel batches, the combination of material, chipbreaker and geometry supports consistent results and straightforward process parameter tuning. Contact Metav Werkzeuge for specification assistance on VCMT110308-RP4 WPP10G inserts and to discuss optimal cutting data for steel turning applications Technical data Article number / SKU: VCMT110308-RP4-WPP10G-WALTER Product label: Drehwendeschneidplatte VCMT110308-RP4 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Grade / Sort: WPP10G Series: Tiger-tec Gold Core data Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 35° Insert size: 11 Thickness designation: 03 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RP4 Execution / style: T Material application: Steel (ISO P) Series notes: WPP10G optimised for steel machining FAQ What materials is this insert designed for? The VCMT110308-RP4 WPP10G insert is optimised for steel (ISO P) applications and the WPP10G grade is selected for wear-resistant, productive turning of a wide range of steels. How does the RP4 chipbreaker benefit production? The RP4 chipbreaker on the insert controls chip form and promotes short, consistent chips, which improves process stability and reduces the risk of chip-related interruptions during turning with Walter Tools inserts. Can this insert be used for interrupted cuts? Yes; the 35° rhombic shape and 0.8 mm corner radius provide edge strength and robustness suited to intermittent cutting conditions when using the VCMT110308-RP4 WPP10G insert. Is the Tiger·tec Gold coating suitable for high-speed turning? The Tiger·tec Gold coating enhances resistance to wear and heat, supporting higher cutting speeds in steel turning within the recommended parameter window for this Walter Tools grade. Where to get cutting data or technical advice for this insert? Metav Werkzeuge provides application support and can advise on cutting parameters for the VCMT110308-RP4 WPP10G insert to match specific machines and steels. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (marketed as Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT110308-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and an optimised RP4 chipbreaker for consistent chip control and extended tool life; the insert is specifically designed for efficient turning of steel and supports stable process results. Order directly via Metav Werkzeuge or consult the technical team for cutting data and application advice. VCMT110308-RP4 WPP20G — Turning indexable insert with Tiger‑tec Gold coating, RP4 chipbreaker — Walter Tools A VCMT110308-RP4 WPP20G turning indexable insert engineered for robust, productive machining of steel components in general and precision turning operations Tiger‑tec Gold coated carbide for robust wear resistance Optimised RP4 chipbreaker for reliable chip control Rhombic 35° shape with 7° clearance angle 0.8 mm corner radius for consistent surface finish Extended tool life through advanced coating and substrate The combination of the Tiger‑tec Gold technology and a coated carbide substrate provides a balanced mix of hardness and toughness that is optimised for steel machining. This grade is designed to resist abrasive wear while maintaining a stable cutting edge under the thermal loads typical of P‑group materials. The result is improved wear resistance and fewer unexpected tool changes, which supports uninterrupted production and predictable tooling costs. The specification supports repeatable performance in serial production and helps maintain component tolerances over longer tool lives. Geometry designed for stable cuts and accurate finishes The insert’s geometry — a rhombic 35° form with a 7° clearance angle and a 0.8 mm corner radius — delivers consistent contact conditions and controlled chip formation. The RP4 chipbreaker is optimised to break and evacuate chips reliably during a range of feeds and depths, reducing the risk of long, entangling chips and enhancing surface quality. These geometric choices mean fewer secondary operations and reduced operator intervention, producing a steady surface finish and dimensional consistency in turning operations. Process efficiency: productivity and predictable results By focusing on wear stability and dependable chip control, the insert supports higher machine utilisation and lower per‑part tooling costs. The insert’s balance of toughness and hardness helps to avoid premature chipping on interrupted cuts and to sustain cutting edge integrity during longer cycles. Improved process security and reduced downtime translate into measurable productivity gains for medium to large batch production. For machining shops aiming to streamline throughput, this insert contributes to a more efficient production flow and fewer unplanned tool changes. Application scope and practical guidance The grade is intended primarily for the machining of steel (ISO P group), covering both unalloyed and alloyed steels encountered in general turning. The designation and form factor make the insert suitable for a wide range of finishing and medium turning tasks where surface quality and dimensional control are important. For specific cutting speeds, feeds and depth‑of‑cut recommendations for particular steels or toolholders, Metav Werkzeuge’s technical advisors can supply validated data and pairing suggestions to match the insert to the machine and the holder. For application recommendations or order details regarding this Walter Tools VCMT110308-RP4 WPP20G indexable insert, contact Metav Werkzeuge for tailored cutting data and procurement support: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCMT110308-RP4-WPP20G-WALTER Designation: VCMT110308-RP4 WPP20G Product type: Turning indexable insert Manufacturer: Walter Tools Designation without grade: VCMT110308-RP4 ISO designation: VCMT110308-RP4 WPP20G Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 35° Size designation: 11 Plate thickness: 03 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G Coating / substrate: coated carbide Chipbreaker: RP4 Execution: T Material application: Steel (ISO P group) FAQ What materials is this insert intended for? The WPP20G grade is optimised for machining steel (ISO P group); the VCMT110308-RP4 WPP20G insert from Walter Tools is specified for unalloyed and alloyed steels used in general turning. What is the corner radius and how does it affect surface finish? The insert features a 0.8 mm corner radius, which offers a compromise between strength and finish: it supports a smooth surface at finishing feeds while providing sufficient edge strength for interrupted cuts. Which chipbreaker is fitted and what benefit does it provide? The RP4 chipbreaker on this insert is designed for reliable chip segmentation and evacuation during a range of feeds, improving process stability and reducing the risk of chip entanglement. Can this insert be used for stainless steel or other non‑ferrous materials? The supplied data specifies suitability for steel (ISO P). There is no designation in the data for stainless steel or non‑ferrous materials, so confirmation should be sought if machining those materials is required. Where can cutting parameters and holder recommendations be obtained? For validated cutting data, holder pairing and application guidance for the VCMT110308-RP4 WPP20G turning insert by Walter Tools, contact Metav Werkzeuge’s technical team for tailored recommendations. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools: Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory‑new merchandise of Walter Tools.
VCMT160402-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating for excellent wear resistance, a reliable FM4 chipbreaker for controlled swarf, and the compact Rhombus 35° geometry for stable turning of rostfreier Stahl; order directly via Metav Werkzeuge or consult their specialists for tailored recommendations. VCMT160402-FM4 WMP20G — turning insert by Walter Tools (for rostfreier Stahl) VCMT160402-FM4 WMP20G is a coated turning insert designed for reliable machining of rostfreier Stahl under medium to robust conditions. Tiger·tec Gold coated grade WMP20G Optimised FM4 chipbreaker Rhombus 35° geometry, 0.2 mm radius Designed for rostfreier Stahl machining Maximise process reliability with a wear-resistant grade The combination of the Tiger·tec Gold coating and the WMP20G carbide grade delivers enhanced resistance to thermal and abrasive wear, which translates into longer edge life and fewer tool changes. For applications in rostfreier Stahl, which tend to cause high heat and work-hardening, this coated grade supports stable chip formation and reduces the risk of built-up edge. The insert’s engineered surface treatment improves heat dissipation and reduces friction, supporting consistent performance in serial production and lowering overall machining costs through extended tool life. Controlled chip flow and repeatable surface quality The FM4 chipbreaker geometry is tuned to produce short, predictable chips in a wide range of turning operations, reducing swarf handling issues and protecting toolpaths. The Rhombus 35° shape and the 0.2 mm corner radius provide a balance of strength and accessibility, permitting close-to-shoulder cuts and fine finishing where required. These features together contribute to predictable cutting forces, which help maintain machine stability and achieve reproducible surface finishes on rostfreier Stahl components with fewer rework cycles. Practical benefits for workshop and production planning As a compact, indexable insert, this solution supports quick index changes and economical reuse of the cutting edges, improving uptime and reducing inventory complexity. The insert designation VCMT160402-FM4 WMP20G signals a standard geometry compatible with a wide range of turning toolholders, simplifying tooling decisions. Process engineers benefit from reduced setup time thanks to reliable cutting edge stability, while operators appreciate fewer interruptions for tool changes—an efficient choice for repetitive and mixed-batch production. Contact Metav Werkzeuge for a machining recommendation or to discuss suitable toolholder pairings and cutting data for rostfreier Stahl at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: VCMT160402-FM4-WMP20G-WALTER Description: VCMT160402-FM4 WMP20G Brand: Walter Tools Product type: turning insert Core specifications Insert size: 16 Relief angle: 7° Corner radius: 0.2 mm Thickness code: 04 Special features and suitability Coating: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM4 Shape: Rhombus 35° Material group suitability: rostfreier Stahl (ISO group M) FAQ What materials is this insert suited for? The insert is specified for machining rostfreier Stahl; the WMP20G grade and Tiger·tec Gold coating are optimised for the demands of that material class. How does the FM4 chipbreaker affect performance? The FM4 chipbreaker produces short, controlled chips that simplify swarf control and help maintain consistent cutting forces for repeatable results. Can the insert be used for finishing and roughing? Yes; the Rhombus 35° geometry with a 0.2 mm corner radius allows for fine finishing and light profiling, while the coated grade supports moderate roughing in rostfreier Stahl under appropriate cutting parameters. Is the insert compatible with standard toolholders? The VCMT geometry is a widely used indexable standard and fits common turning toolholders designed for Rhombus 35° inserts; verify holder compatibility with the toolholder supplier. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for clarification only and indicate no affiliation with our company. The offered item is an original, factory-new product from the manufacturer (Walter Tools).
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com