VCGT160404-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Benefit from stable chip control and a compact, high-precision geometry that supports consistent turning results; the combination of the MN2 chipbreaker, coated carbide WNN10 grade and a 7° clearance angle helps secure reliable tool life and process stability. Order the insert via Metav Werkzeuge or consult the advisors for grade matching and application-specific advice. VCGT160404-MN2 WNN10 – Indexable turning insert, MN2 chipbreaker, 7° clearance (Walter Tools) A VCGT160404-MN2 WNN10 insert engineered for general turning tasks, delivering controlled chip formation and repeatable edge stability in a compact rhombic 35° form. Coated carbide grade WNN10 for general turning MN2 chipbreaker for controlled chip formation 7° clearance angle for reliable cutting security Rhombic 35° shape with 0.4 mm corner radius Predictable chip control for efficient machining The insert’s MN2 chipbreaker is designed to produce short, consistent chips that reduce the risk of entanglement and assist in automated chip evacuation. That controlled chip formation translates into fewer interruptions on the shopfloor and improved cycle-time stability. The combination of a coated carbide grade and a specific chip geometry keeps cutting forces predictable, which helps stabilise feeds and speeds across different setups. Geometry that supports surface quality and tool life A rhombic 35° shape with a 0.4 mm corner radius offers a balanced compromise between edge strength and finishing capability. The modest corner radius reduces the likelihood of corner chipping while enabling decent surface finishes at moderate feeds. With a 7° clearance angle, the insert minimises rubbing on the flank face, lowering heat input and contributing to prolonged edge retention over extended production runs. Compact dimensions for versatile toolholder use The insert measures 16 mm with a plate thickness of 0.4 mm, making it suitable for rigid toolholders and space-limited setups where stability is essential. Its standard VCGT160404-MN2 geometry is widely supported by common toolholder systems, allowing rapid integration into existing turning fixtures without major fixturing changes. The concise format helps maintain rigidity and repeatability in short overhang applications. Coated grade and series guidance for application matching The cutting material is a coated carbide (WNN10); its suitability for specific materials should be verified against the product matrix to ensure optimal results. The open series designation means the grade is positioned for general use across a range of workpiece materials, but the final selection must consider component hardness, workpiece geometry and coolant strategy. For best outcomes, cross-reference the grade with machining data sheets before series deployment. Contact Metav Werkzeuge for precise grade matching and application advice for the Walter Tools VCGT160404-MN2 WNN10 insert Technical data Article number / SKU: VCGT160404-MN2-WNN10-WALTER Type: Indexable turning insert Designation: VCGT160404-MN2 WNN10 Series: Walter Schneidstoffsorte - Serie offen Core specifications Insert size: 16 mm Thickness: 0.4 mm Corner radius: 0.4 mm Clearance angle: 7° Insert form: Rhombic 35° Chipbreaker: MN2 Execution: T Tolerance class: G Materials & special features Coating: Coated carbide (WNN10) Material information: Katalogabhängig Suitability note: Check product matrix for material compatibility Series description: Walter Schneidstoffsorte - Serie offen FAQ What chip behaviour can be expected with this insert? The MN2 chipbreaker on the VCGT160404-MN2 WNN10 insert promotes short, controllable chips that aid evacuation and reduce risk of entanglement during turning. Is this grade suitable for stainless steel? The insert uses the coated carbide grade WNN10; material suitability varies—consult the product matrix to confirm performance on rostfreier Stahl and other alloys. Which toolholders accept this insert geometry? The VCGT160404-MN2 geometry is compatible with standard toolholders designed for rhombic 35° VCGT-style inserts; verify holder clamping specifications before mounting. How can the right cutting data be determined for production use? Refer to Walter Tools’ machining recommendations for the WNN10 grade and cross-check with the product matrix; if in doubt, request application-specific data from Metav Werkzeuge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT160404-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, precise chip control and robust cutting performance for efficient turning of stainless steels and heat‑resistant superalloys. Order the inserts directly via Metav Werkzeuge or contact the consultants for tailored cutting data. VCGT160404-MN2 WSM01 turning insert — Tiger‑tec Silver, for stainless steel and superalloys — Walter Tools A VCGT160404-MN2 WSM01 turning insert designed for demanding general turning tasks in stainless steel and heat‑resistant superalloys Tiger‑tec Silver coating for extended tool life Suitable for stainless steel and superalloys Rhombic 35° shape with 0.4 mm corner radius MN2 chipbreaker for controlled chip formation Increased productivity through tailor‑made cutting geometry The Tiger‑tec Silver series and the WSM01 grade combine a wear‑resistant coating with a precisely engineered substrate to deliver stable performance when machining tough materials. The coating improves heat resistance and reduces flank wear, which leads to longer intervals between tool changes and a more consistent surface finish. Used in batch production or single‑pass finishing, this insert supports a measurable increase in process efficiency by maintaining cutting edge integrity under thermal and mechanical stress. Geometry that improves surface quality and tool life The Rhombic 35° configuration and a 0.4 mm corner radius provide a good compromise between strength and edge definition. The smaller corner radius enables close tolerance turning and fine finishes, while the rhombic shape affords flexibility for different cutting directions and depth‑of‑cut strategies. The 7° clearance reduces rubbing and minimises built‑up edge formation on sticky materials. Together with the MN2 chipbreaker, the geometry ensures consistent chip control, reducing the risk of entanglement and improving operator safety at higher cutting speeds. Application guidance and process reliability This insert is intended for machining applications classified under the ISO groups S and M — notably superalloys, titanium and stainless steels — where thermal loads and material toughness challenge conventional grades. The toleranzklasse G ensures repeatable seating and indexation in standard toolholders, supporting fast, reliable insert changes and predictable dimensional control. For best results, select cutting parameters that favour moderate feeds and optimised speeds for the chosen alloy; Metav Werkzeuge can provide recommended starting values tailored to specific machines and workpiece grades. Contact Metav Werkzeuge for customised cutting data or to confirm availability of Walter Tools Tiger‑tec Silver inserts. Email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCGT160404-MN2-WSM01-WALTER Designation: VCGT160404-MN2 WSM01 Product type: Drehwendeschneidplatte / turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 35° Plate size: 16 Plate thickness: 04 Tolerance class: G Special features Chipbreaker: MN2 Grade: WSM01 (coated carbide) Material suitability: S / M (superalloys and stainless steels) Execution: T FAQ What materials is this insert designed for? The VCGT160404‑MN2 WSM01 is specified for ISO groups S and M, making it suitable for superalloys, titanium‑based alloys and stainless steel machining in demanding turning operations. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker promotes stable chip formation and evacuation under the thermal and mechanical loads typical of heat‑resistant alloys, reducing the likelihood of built‑up edge and improving surface finish consistency. What advantages does the Tiger‑tec Silver series provide? The Tiger‑tec Silver coating offers enhanced heat resistance and wear protection compared with uncoated grades, which translates into longer tool life and fewer re‑indexing operations in serial production. Is the insert compatible with standard toolholders? Yes—this insert conforms to common indexable insert geometries and the toleranzklasse G ensures repeatable seating in compatible toolholders for fast and secure clamping. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new merchandise of the manufacturer.
VCGT160404FS-1 WDN10 Wendeplatten - Walter Tools
The combination of PKD cutting performance (WDN10) and a rhombic 35° geometry ensures high productivity and stable chip control for abrasive non‑ferrous materials; order the insert directly via Metav Werkzeuge or consult the technical advisers for process integration. VCGT160404FS-1 WDN10 — turning insert, PKD grade, Walter Tools The VCGT160404FS-1 WDN10 is a PKD turning insert engineered for efficient machining of non‑ferrous and abrasive, non‑ferrous materials in production and finishing operations. PKD grade WDN10 for abrasive materials Rhombic 35° insert geometry 7° clearance angle for reliable engagement 0.4 mm corner radius for fine edge quality Improve throughput with PKD efficiency The WDN10 grade is a PKD (polycrystalline diamond) solution that offers exceptional wear resistance when machining abrasive, non‑ferrous materials such as aluminium alloys, copper and similar substrates. This material combination translates into longer tool life and fewer insert changes, directly supporting higher machine uptime and lower per‑part tooling cost. The rhombic 35° geometry reduces cutting forces in many turning operations, enabling stable engagement in interrupted cuts and short‑chipping applications while maintaining consistent chip evacuation. Achieve consistent surface finish and predictable results A 0.4 mm corner radius together with the insert's chipbreaker design produces a fine edge quality and controlled chip formation, which benefits finishing passes and reduces secondary operations. The modest 7° clearance prevents rubbing while allowing the insert to deliver repeatable surface integrity. For process planners and operators unfamiliar with PKD, polycrystalline diamond is a hard, monolithic cutting material suited to non‑ferrous metals and abrasive workpieces; its use reduces flank wear and improves dimensional stability over longer production runs. Integration and application guidance for production use The insert's dimensions and plate thickness (format 16, thickness 04) are compatible with standard clamping systems for rhombic inserts; this simplifies retrofit into existing toolholders and reduces set‑up time. For optimal results, assess the machining matrix against the grade WDN10 and the component material: PKD behaves differently from carbide and favours stable feeds and appropriate cutting speeds for the chosen workpiece. The open series designation from the manufacturer indicates broad applicability, but checking the product matrix supports the best parameters for both roughing and finishing steps. Discuss PKD solutions with Metav Werkzeuge to select the ideal Walter Tools insert for the application and ensure seamless integration into the production process Technical data Article number: VCGT160404FS-1-WDN10-WALTER Designation: VCGT160404FS-1 WDN10 Product type: Turning insert Brand: Walter Tools Core data Insert size: 16 Plate thickness: 04 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: G Special features Grade: WDN10 Cutting material: PKD (polycrystalline diamond) Chipbreaker: 1 Insert shape: Rhombic 35° Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ Which materials is this insert best suited for? The WDN10 PKD grade is optimised for abrasive, non‑ferrous materials; the VCGT160404FS-1 WDN10 insert performs particularly well on aluminium alloys, copper and similar substrates where PKD offers superior wear resistance. Can this PKD insert be used for finishing applications? Yes, the combination of a 0.4 mm corner radius and the insert's chipbreaker enables high‑quality surface finishes, making the insert suitable for finishing passes on appropriate non‑ferrous components. How does the rhombic 35° geometry affect cutting performance? Rhombic 35° geometry reduces cutting forces and improves entry behaviour in turning, which promotes stable engagement and consistent chip flow, supporting reliable production cycles. Is the insert compatible with standard toolholders? The insert follows standard dimensions for its format (16, thickness 04) and can be integrated into common holders for rhombic inserts; compatibility checks with the specific holder type are recommended before series implementation. Does the product require special machining parameters compared with carbide? PKD behaviour differs from carbide: the VCGT160404FS-1 WDN10 benefits from carefully chosen speeds and stable feeds to leverage wear resistance and avoid edge damage; consultation of the product matrix helps define optimal parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for clarification only; there is no affiliation between our company and the brands mentioned. The offered item is original, brand‑new goods from the manufacturer.
VCGT160404M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of cermet cutting performance, controlled chip formation and versatile geometry for reliable finishing results; order directly via Metav Werkzeuge or contact the consultants for material-specific advice. VCGT160404M-FP2 WEP10C — Indexable turning insert, Cermet grade, FP2 chipbreaker (Walter Tools) The VCGT160404M-FP2 WEP10C is an indexable turning insert designed for fine finishing and stable edge performance in precision turning applications. Cermet grade WEP10C for fine finishing FP2 chipbreaker for controlled chips Rhombic 35° geometry for versatility 0.4 mm corner radius for fine edge Reliable finishing with cermet performance The Walter Cermet series combines a cermet cutting grade with a geometry optimised for finishing operations, delivering a measured improvement in surface quality where precision matters. The carbide-free cermet substrate supports a sharp cutting edge and reduced built-up edge, which contributes to consistent component finishes and predictable tool life. For customers evaluating materials, the specific WEP10C grade requires checking the product matrix to confirm suitability for particular alloys and application windows. Predictable chip control for stable process results The integrated FP2 chipbreaker is engineered to produce compact, controllable chips at moderate depths of cut, reducing interruption risks in automated turning processes. Stable chip formation improves cycle times by lowering downtime for chip clearing and minimises the likelihood of surface damage caused by long, stringy swarf. In practice, this results in a more efficient machining cycle and fewer quality deviations when paired with a matching holder and recommended cutting data. Versatile geometry for adaptable turning strategies The Rhombic 35° insert shape combined with a 7° clearance angle and a 0.4 mm corner radius supports flexible turning strategies, from light finishing cuts to more aggressive passes where edge strength is required. The insert is supplied in size 16 format with thickness code 04 and features the FP2 chipbreaker for balanced performance. Because material behaviour varies, confirm material compatibility using the Walter Cermet product matrix to ensure the insert meets production requirements under expected cutting conditions. For production planning or to discuss whether the Walter Tools VCGT160404M-FP2 WEP10C is the right choice for a specific component, contact Metav Werkzeuge's technical team by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored guidance and availability. Technical data Article number: VCGT160404M-FP2-WEP10C-WALTER Label: Drehwendeschneidplatte VCGT160404M-FP2 WEP10C Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Manufacturer: Walter Tools Series: Walter Cermet Grade: WEP10C Execution: T Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 16 Thickness code: 04 Tolerance class: G Design & features Chipbreaker: FP2 Geometry: Rhombic 35° ISO designation: VCGT160404M-FP2 WEP10C Short designation: VCGT160404M-FP2 Material designation: Katalogabhängig FAQ What applications suit this insert best? The VCGT160404M-FP2 WEP10C insert is intended for finishing-oriented turning operations where the Walter Cermet grade WEP10C provides a fine cutting edge and consistent surface quality. What does the FP2 chipbreaker deliver in practice? The FP2 chipbreaker on the VCGT160404M-FP2 WEP10C promotes compact, controlled chips, improving process stability and reducing interruptions during continuous turning cycles. How does the Rhombic 35° geometry affect machining strategy? Rhombic 35° geometry on the VCGT160404M-FP2 WEP10C enables versatile approach angles that can be used for both finishing and more engaged cuts, offering flexibility in setup and toolpath planning. Is material suitability specified for this grade? The Walter Cermet WEP10C is a specialist grade; material suitability for the VCGT160404M-FP2 WEP10C should be verified against the Walter product matrix to ensure optimal results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT160404ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
VCGT160404ML-FX4 WEP01C – Drehwendeschneidplatte von Walter Tools VCGT160404ML-FX4 WEP01C ist eine präzise konstruierte Drehwendeschneidplatte für anspruchsvolle Drehoperationen in der Metallbearbeitung Cermet-Schneidstoff WEP01C für präzise Schnittqualität FX4 Spanbrecher für kontrollierte Spanbildung Rhombus 35° Plattenform für vielseitige Einsetzbarkeit 7° Freiwinkel und 0,4 mm Eckenradius für feine Schnitte Toleranzklasse G und Plattendicke 04 für stabile Performance Höhere Prozesssicherheit durch moderne Schneidstofftechnik Die Wendeschneidplatte aus der Walter Cermet Serie kombiniert verschleißfesten Cermet mit einem optimierten Spanformer und liefert dadurch konstante Bearbeitungsergebnisse. Die Sorte WEP01C bietet eine feine, wiederholgenaue Schneidkante, die sich besonders für anspruchsvolle Feinbearbeitungen eignet. Anwender profitieren von gleichbleibender Oberflächengüte und verbesserter Standzeit, wodurch Rüstzyklen seltener und Gesamtprozesskosten sinken. Die robuste Ausführung T sorgt für sicheren Sitz in handelsüblichen Plattensitzen. Präzise Geometrie für kontrollierte Spanabfuhr und Schnittqualität Die Kombination aus Rhombus 35° Plattenform, FX4 Spanbrecher und 7° Freiwinkel ermöglicht eine kontrollierte Spanbildung und reduziert Vibrationen bei variierenden Schnittbedingungen. Der Eckenradius 0,4 mm trägt zu feiner Kantenfestigkeit bei und unterstützt eine gleichmäßige Schnittkante. Vor dem Einsatz sollte die konkrete Werkstoffeignung anhand der Produktmatrix geprüft werden, um optimale Schnittwerte und Werkzeugstandzeiten zu erreichen. Wirtschaftlichkeit und Produktivität im Fertigungsalltag Durch die gezielte Geometrie und die materialseitige Auslegung der Sorte lässt sich mit dieser Wendeschneidplatte die Produktivität steigern: Weniger Werkzeugwechsel, gleichmäßige Oberflächen und planbare Standzeiten führen zu messbaren Effizienzgewinnen. Die präzise Toleranzklasse G sichert reproduzierbare Ergebnisse bei Serienfertigung. Für technische Rückfragen oder Anpassungen an spezifische Bearbeitungsaufgaben steht die technische Beratung zur Verfügung. Empfehlung: Für hochpräzise Drehoperationen empfiehlt sich die VCGT160404ML-FX4 WEP01C von Walter Tools; bei Fragen zur Eignung und Prozessoptimierung technische Beratung anfordern: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: VCGT160404ML-FX4-WEP01C-WALTER Marke: Walter Tools Serie: Walter Cermet Typ: VCGT160404ML-FX4 WEP01C Produktart: Drehwendeschneidplatte Fakten Plattengröße: 16 Plattendicke: 04 Freiwinkel: 7° Eckenradius: 0,4 Besonderheiten Spanbrecher: FX4 – kontrollierte Spanbildung Schneidstoff: Cermet – verschleißfest und präzise Sorte: WEP01C – Walter Schneidstoffsorte Plattenform: Rhombus 35° Toleranzklasse: G Ausführung: T Materialangabe: Katalogabhängig Wendeplatte ISO Bezeichnung: VCGT160404ML-FX4 WEP01C FAQ Welche Vorteile bietet die Sorte WEP01C gegenüber hartmetallbeschichteten Platten? Die WEP01C aus der Walter Cermet Serie liefert eine sehr feine Schneidkante und hohe Oberflächengüte; gegenüber manchen beschichteten Hartmetallen zeigt sie in bestimmten Feinbearbeitungsaufgaben bessere Verschleißfestigkeit und stabilere Schnittbedingungen. Für welche Bearbeitungsschritte ist die VCGT160404ML-FX4 WEP01C besonders geeignet? Die VCGT160404ML-FX4 WEP01C eignet sich besonders für präzise Drehoperationen, bei denen eine kontrollierte Spanabfuhr und gleichbleibende Oberflächengüte wichtig sind; die Geometrie unterstützt feine Schnittbilder. Wie beeinflusst der FX4 Spanbrecher die Prozesssicherheit? Der FX4 Spanbrecher erzeugt kurze, kontrollierte Späne und reduziert so das Risiko von Spanverwicklungen; das verbessert die Prozesssicherheit und erleichtert die Automatisierung von Drehprozessen. Muss die Werkstoffauswahl vor dem Einsatz geprüft werden? Ja, die konkrete Werkstoffeignung der WEP01C sollte anhand der Produktmatrix und der Fertigungsbedingungen geprüft werden, um optimierte Schnittwerte und maximale Standzeit zu gewährleisten. Ist die Toleranzklasse G ausreichend für Serienfertigung? Die Toleranzklasse G bietet reproduzierbare Abmaße und ist damit für viele Serienanwendungen geeignet; bei sehr engen Toleranzen empfiehlt sich eine Abstimmung mit der Anwendungstechnik. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT160404MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the WEP01C cermet grade, the FX4 chipbreaker and the compact Rhombus 35° geometry to achieve stable chip control and consistent edge life in demanding turning operations; order directly via Metav Werkzeuge or consult the technical team for process alignment. VCGT160404MR-FX4 WEP01C — Turning insert with FX4 chipbreaker, Rhombus 35° | Walter Tools VCGT160404MR-FX4 WEP01C is a precision turning insert intended for versatile turning tasks where controlled chip formation and consistent cutting performance are required Walter Cermet grade WEP01C FX4 chipbreaker for reliable chip control Rhombus 35° geometry for versatile turning Corner radius 0.4 mm, free angle 7° Stable cutting and predictable productivity The combination of a cermet cutting grade and a dedicated FX4 chipbreaker delivers controlled chips and a stable cutting edge, which translates into fewer interruptions and higher process reliability. Cermet grades are often selected for their wear resistance and edge stability; the result is a predictable tool life that supports constant production flow. This insert’s design focuses on efficiency and repeatability in turning operations where consistent surface quality and dimensional control are priorities. Geometry that supports flexible machining strategies A Rhombus 35° form provides a versatile lead angle that balances cutting forces and surface finish, enabling both light finishing cuts and more substantial machining passes when process parameters are adjusted. The corner radius 0.4 mm reduces cutting stress concentration while contributing to a fine surface texture, and the free angle 7° helps maintain a secure cutting edge engagement. These geometric attributes simplify tool selection across many turning routines, reducing setup complexity on the shop floor. Application guidance and selection criteria The insert belongs to the Walter Cermet series and is specified as grade WEP01C; material suitability should be verified against the manufacturer’s product matrix for optimal results. The specification "catalogue-dependent" for base material means that detailed substrate and coating information is available in the technical matrix rather than within this summary. For precise process matching—such as feed and speed windows, recommended depths of cut and finishing strategies—refer to the product matrix or request tailored machining data from Metav Werkzeuge. Integration, handling and compatibility benefits The ISO-style designation and the VCGT family geometry ensure compatibility with standard toolholders designed for rhombic inserts, facilitating quick changes and simple inventory management. The insert’s dimensions are aligned with conventional clamping systems, supporting straightforward replacement and minimising machine downtime. With tolerance class G and the given size and thickness coding, the component fits established tooling systems and allows systematic tool management for batch production. For a precise application recommendation and procurement of genuine Walter Tools inserts such as VCGT160404MR-FX4 WEP01C, please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — the technical team will advise on the best grade and geometry for the intended operation. Technical data Article number: VCGT160404MR-FX4-WEP01C-WALTER Designation: VCGT160404MR-FX4 WEP01C Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Walter Cermet Grade: WEP01C Facts Free angle: 7° Corner radius: 0.4 mm Insert size: 16 Thickness: 04 Tolerance class: G Chipbreaker: FX4 Plate form: Rhombus 35° Special features Cermet grade WEP01C Execution: T Material: catalogue-dependent Sorten- und Serienbeschreibung: WEP01C is a cermet cutting grade; check product matrix for detailed recommendations FAQ What machining tasks suit this insert best? The VCGT160404MR-FX4 WEP01C turning insert is designed for versatile turning routines where controlled chip formation and steady edge life are needed; final application suitability should be checked against the product matrix. How does the FX4 chipbreaker influence performance? The FX4 chipbreaker on this Walter Tools insert promotes consistent chip control and reduces the risk of chip-related disruptions, supporting uninterrupted production and improved surface quality. What advantages does the Rhombus 35° form provide? A Rhombus 35° geometry offers a balanced lead angle that moderates cutting forces while enabling both finishing and more aggressive passes when process parameters allow. When is a corner radius of 0.4 mm appropriate? A corner radius of 0.4 mm on this insert is well suited to achieving a fine surface finish and lowering edge stress during light to moderate depth cuts; it is a compromise between durability and surface quality. Is the insert compatible with standard VCGT toolholders? Yes, the VCGT160404MR-FX4 WEP01C conforms to standard VCGT family dimensions and is intended for holders that accept rhombic inserts of the same ISO designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The article offered is an original, factory-new product of the manufacturer.
VCGT160408-FM2 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high heat resistance, stable chip control and a precise 0.8 mm corner radius for reliable turning of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VCGT160408-FM2 WSM10S — Indexable Turning Insert, Tiger·tec Silver, 0.8 mm Corner Radius — Walter Tools The VCGT160408-FM2 WSM10S is an indexable turning insert engineered for demanding external turning of stainless steel and heat‑resistant superalloys, offering a rhombic 35° geometry for fine profile control. Tiger·tec Silver coating for heat resistance Suitable for stainless steel and superalloys Rhombic 35° form with 0.8 mm corner radius 7° clearance angle for consistent chip control Greater process reliability through optimised coating and grade The Tiger·tec Silver coating combined with the WSM10S carbide grade delivers improved thermal stability and wear resistance for prolonged cutting periods. This pairing reduces the risk of built‑up edge and supports stable chip formation when machining tough alloys. For production environments where consistent component quality matters, the result is fewer tool changes and a steadier throughput — a clear economic advantage for batch runs and continuous turning operations. Precise geometry for controlled cutting and surface finish The rhombic 35° insert geometry with a 0.8 mm corner radius and a 7° clearance angle is designed to balance edge robustness and surface integrity. The moderate corner radius helps maintain dimensional accuracy while smoothing peak loads on the cutting edge, which is especially relevant for finishing passes on stainless steel. Explaining briefly: a larger corner radius spreads cutting forces over a greater area, reducing local wear and improving repeatability in serial production. Application suitability and recommended use cases Developed for machining materials designated S and M according to ISO classifications, this insert is particularly effective on heat‑resistant superalloys and stainless steel, where thermal conduction is limited and cutting edges face elevated stresses. The FM2 chipbreaker promotes predictable chip formation under variable feeds, lowering the risk of entanglement and improving operator safety. For best results, pair the insert with rigid toolholding and appropriate coolant strategies to extend cutting edge life and maintain consistent surface quality. Contact Metav Werkzeuge for tailored cutting data, delivery options and to confirm compatibility with specific machine and workpiece combinations Technical Data Article number: VCGT160408-FM2-WSM10S-WALTER SKU: VCGT160408-FM2-WSM10S-WALTER Product type: Indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 16 mm Thickness code: 04 Shape: Rhombic 35° Tolerance class: G Special features Coating: Tiger·tec Silver Chipbreaker: FM2 Material group suitability: S / M (heat‑resistant superalloys, stainless steel) Substrate: Coated cemented carbide Execution: T FAQ What materials is this insert best suited for? The VCGT160408-FM2 WSM10S insert is optimised for machining heat‑resistant superalloys and stainless steel, following ISO designations S and M. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver increases thermal resistance and wear performance, helping the Walter Tools insert maintain a stable cutting edge during extended turning operations. What does the FM2 chipbreaker deliver in practice? The FM2 chipbreaker encourages controlled, short chips under common turning conditions, reducing chip handling issues and improving process safety. Is the 0.8 mm corner radius suitable for finishing passes? Yes; the 0.8 mm corner radius balances edge strength with surface quality, making the insert suitable for light finishing as well as mixed roughing/finishing cycles. Which insert geometry should be chosen for tight radii and profile work? The rhombic 35° form of this insert offers good access for profile work while preserving edge stability for medium to fine contours. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered article is original, brand‑new goods from the manufacturer. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCGT160408-FM2 WSM20S WSM20S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating of the WSM20S grade with a precise 0.8 mm corner radius and the FM2 chipbreaker delivers consistent edge stability when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or contact our consultants for application advice. VCGT160408-FM2 WSM20S | Indexable turning insert, FM2 chipbreaker (for stainless steels & superalloys) — Walter Tools VCGT160408-FM2 WSM20S is a coated indexable turning insert designed to provide secure chip control and reliable edge life when machining demanding materials such as stainless steels and heat‑resistant superalloys Tiger·tec Silver coated grade WSM20S FM2 chipbreaker for stable chip control Rhombic 35° geometry for versatile turning 0.8 mm corner radius, 7° clearance angle Consistent performance for demanding materials The VCGT160408-FM2 WSM20S insert combines a coated carbide base with the Tiger·tec Silver technology to address difficulties typical of ISO group M and S materials. The grade WSM20S is specified for stainless steels (M) and superalloys / titanium (S), where toughness and heat build‑up challenge edge life. By using a specialised coating and substrate pairing, the insert supports steady chip formation and reduces the risk of built‑up edge, enabling more predictable process windows in production turning operations. Geometry engineered for controllable chips and repeatable quality The insert’s FM2 chipbreaker and Rhombus 35° shape are engineered to create defined chip segments and lower cutting forces on many turning profiles. The combination of a 0.8 mm corner radius with a 7° clearance angle balances edge strength and cutting access: the radius improves resistance to edge chipping while the relief angle assists in chip flow and surface finish. These geometric choices translate into fewer interruptions, consistent tolerances and improved surface integrity when replacing inserts in multi‑pass turning cycles. Coating and grade advantages that extend tool life The Tiger·tec Silver coating technology provides enhanced thermal stability and wear resistance without sacrificing toughness. In practice, the WSM20S coated grade supports secure edge retention against the adhesive and abrasive wear mechanisms common in stainless steels and high‑temperature alloys. The result is a reliable cutting edge that preserves dimensional accuracy for longer intervals between indexings, contributing to lower process variability and improved overall productivity on CNC turning centres. Integration into tooling systems and process support With a standard Rhombus 35° form and the designation VCGT160408-FM2, the insert fits common ISO toolholders for external turning and profiling. The tolerance class G and established grade mean straightforward tooling choice and repeatable seating during indexable changes. For tailored cutting parameters, Metav Werkzeuge’s application engineers can advise on feed, speed and coolant strategies to match the material and machine capabilities, helping to translate the insert’s technical benefits into measurable production gains For machining stainless steels and superalloys with maximum edge stability, consult Metav Werkzeuge for tailored recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: VCGT160408-FM2-WSM20S-WALTER Designation: VCGT160408-FM2 WSM20S Product type: Indexable turning insert Manufacturer: Walter Tools Key measurements Insert size: 16 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: G Materials & features Coating: Tiger·tec Silver Grade: WSM20S (coated carbide) Chipbreaker: FM2 Geometry: Rhombus 35° Material suitability: stainless steels (M), superalloys / titanium (S) Series: Tiger‑tec Silver FAQ What materials is this insert suitable for? The VCGT160408-FM2 WSM20S insert (Walter Tools indexable turning insert, SKU VCGT160408-FM2-WSM20S-WALTER) is specified for ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), offering a balance of wear resistance and edge stability for those materials. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on this insert promotes controlled chip formation and evacuation; in the VCGT160408-FM2 WSM20S configuration it helps to reduce stringing and supports consistent surface quality during turning operations. Which geometry benefits should be expected for finish and roughing passes? The Rhombus 35° geometry combined with a 0.8 mm corner radius delivers enhanced edge strength for light roughing and finishing, while the 35° form offers versatility across a range of turning profiles for the Walter Tools insert. Is the insert compatible with standard toolholders? Yes, the VCGT160408-FM2 designation follows common ISO insert standards and is compatible with corresponding holders for rhombic 35° indexable inserts; tolerance class G ensures consistent seating and repeatability. What does the Tiger·tec Silver grade deliver in daily production? The Tiger·tec Silver coating used on the WSM20S grade provides thermal and wear benefits that support longer edge life and more predictable process stability when machining demanding materials, reducing tool change frequency and process variation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names remain the property of their respective owners. Brand names are used for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered article is original, factory‑new material supplied by the manufacturer.
VCGT160408-FN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control and consistent geometry for stable turning results and predictable tool life; choose a proven uncoated carbide grade for cost-effective machining and request availability or application advice via Metav Werkzeuge. VCGT160408-FN2 WN10 — VCGT160408-FN2 WN10 indexable turning insert (Rhombic 35°, 0.8 mm nose radius) by Walter Tools The VCGT160408-FN2 WN10 is an indexable turning insert designed for versatile medium‑duty machining with an FN2 chipbreaker and a rhombic 35° geometry suitable for a wide range of turning operations. Rhombic 35° geometry for versatile turning 0.8 mm nose radius for precise profile control 7° clearance angle for secure cutting conditions Uncoated carbide grade WN10 for predictable wear Predictable machining performance through targeted chip control and grade choice The insert’s combination of the FN2 chipbreaker and the uncoated WN10 carbide grade provides a balance between chip formation and edge robustness. The FN2 geometry is engineered to break chips reliably under a wide range of cutting parameters, which reduces rework and machine downtime while maintaining consistent material removal rates. Selecting an uncoated grade means a simpler wear behaviour and often lower tooling cost per edge change; check the product matrix for specific workpiece suitability to ensure optimal results. The tolerance class G supports consistent seating in standard toolholders, contributing to repeatable part tolerances and predictable process windows. Consistent surface quality thanks to defined geometry and small nose radius The rhombic 35° form combined with a 0.8 mm nose radius delivers a good compromise between accessibility in profiles and surface finish requirements. The relatively small nose radius helps to produce fine contour detail and reduced cutting forces on small diameters, while the 7° clearance angle improves edge engagement and reduces rubbing at the flank. These geometric choices translate into tangible benefits on the shop floor: lower vibration risk, repeatable part finishes and reduced need for secondary finishing. The insert’s format makes it suitable for applications where a controlled, predictable cutting behaviour is more important than extreme material removal rates. Application guidance and selection for efficient tool use The insert is available in format code 16 with thickness code 04 and is supplied in the Walter Schneidstoffsorte series. As with all grade selections, the WN10 designation denotes an uncoated cemented carbide — check the manufacturer's product matrix to confirm suitability for specific materials and cutting conditions. For indexable turning, match the insert geometry and chipbreaker to the part’s material, feed and depth of cut: FN2 is aimed at controlled chip breaking across moderate feeds. Where process reliability is essential, choose holders and clamping that respect the insert’s G tolerance to maintain repeat accuracy and minimise setup time. Contact Metav Werkzeuge for availability, detailed cutting-data recommendations or to discuss whether the VCGT160408-FN2 WN10 insert fits the intended application — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VCGT160408-FN2-WN10-WALTER Label: Drehwendeschneidplatte VCGT160408-FN2 WN10 Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Execution: T Facts Insert size: 16 Nose radius: 0.8 mm Free angle: 7° Thickness code: 04 Chipbreaker: FN2 Tolerance class: G Special features Rhombic 35° plate form Uncoated cemented carbide (catalogue dependent) Designed for medium‑duty turning Predictable chip control and stable cutting edge FAQ What applications suit this insert best? The VCGT160408-FN2 WN10 indexable turning insert is designed for versatile medium‑duty turning tasks where controlled chip breaking and a fine nose radius are required; verify the workpiece match using the manufacturer’s product matrix. Is the grade coated or uncoated? The WN10 designation describes an uncoated cemented carbide grade; this gives a predictable wear behaviour and often suits general turning tasks without demanding coating properties. Which geometrical features affect surface finish? The rhombic 35° geometry together with the 0.8 mm nose radius and 7° clearance angle on this insert govern contact conditions and thus help achieve consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product from the stated manufacturer.
VCGT160408-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of a proven combination of stable chip control and a robust rhombic geometry for reliable turning performance; order directly via Metav Werkzeuge or consult the team for application-specific machining advice. VCGT160408-FN2 WNN10 turning insert — FN2 chipbreaker, rhombic 35° geometry (Walter Tools) VCGT160408-FN2 WNN10 is an indexable turning insert designed for general turning applications where secure chip control and repeatable performance are required Stable FN2 chipbreaker for consistent chip control Rhombic 35° geometry for versatile turning tasks 0.8 mm corner radius balancing strength and finish 7° relief angle to reduce rubbing and tool wear Optimised chip control for predictable productivity The combination of the FN2 chipbreaker and the WNN10 cutting grade (a coated carbide class) delivers consistent chip control in a wide range of turning operations. The chipformer geometry reduces risk of built-up edge and ensures stable evacuation of chips, which directly supports longer uninterrupted cycles and fewer work-hold interruptions. Because the grade is specified as catalogue-dependent, the cutting material and coating are aligned to the intended application matrix, so machining parameters can be tuned for improved tool life and process reliability. Geometry that supports both durability and surface quality A rhombic 35° insert form with a 0.8 mm corner radius and a 7° relief angle creates a balanced contact condition between tool and workpiece. The acute approach of the geometry reduces cutting forces for lighter finishing passes while the modest corner radius provides sufficient edge strength for semi-finishing, giving a reliable compromise between surface finish and edge durability. The insert’s profile helps to control vibration and maintain repeatable part geometry during repetitive production runs. Practical advantages for workshop productivity and repeatability Produced to tolerance class G, the insert offers consistent seating and repeatable indexing on standard toolholders, supporting quick tool changes and straightforward inventory management. The VCGT family designation and the clear ISO-style code allow straightforward specification in bills of materials and CNC tool libraries. As a coated-carbide turning solution from a reputable manufacturer, the insert supports efficient process planning and predictable maintenance intervals for small-batch and serial production alike. For guidance on cutting parameters, grade selection and application matching for the Walter Tools VCGT160408-FN2 WNN10 insert, contact Metav Werkzeuge for technical consultation and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VCGT160408-FN2-WNN10-WALTER Designation: VCGT160408-FN2 WNN10 Product type: Turning indexable insert Manufacturer (brand): Walter Tools Numbers / Core technical data Relief angle: 7° Corner radius: 0.8 mm Insert size designation: 16 Thickness designation: 04 Tolerance class: G Special features and versions Grade: WNN10 (coated carbide) Chipbreaker: FN2 Shape: Rhombic 35° Series: Walter cutting grade series - open Material information: catalogue-dependent FAQ What materials is this insert intended for? The VCGT160408-FN2 WNN10 insert is a coated-carbide grade; confirm material suitability via the Walter Tools product matrix for the WNN10 grade to ensure optimal performance. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on this insert provides controlled chip formation and evacuation, which contributes to stable cutting conditions and fewer interruptions during turning operations. Is the corner radius suitable for finishing operations? A 0.8 mm corner radius offers a balance between edge strength and surface finish, making the insert suitable for light finishing and semi-finishing passes. Can the insert be used in existing VCGT toolholders? The VCGT code is a standard ISO-style designation; the VCGT160408-FN2 WNN10 is compatible with toolholders designed for VCGT inserts and benefits from repeatable seating thanks to tolerance class G. What should be checked before specifying this insert for series production? Check the WNN10 grade’s material matrix and verify cutting data recommendations from Walter Tools to match speeds, feeds and cooling strategy to the workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
VCGT160408-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, stable chip control and robust edge security to maintain productive turning of stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or ask their consultants for cutting data and application advice. VCGT160408‑MM4 WSM01 – indexable turning insert, Rhombic 35°, 0.8 mm corner radius, Walter Tools The VCGT160408‑MM4 WSM01 is an indexable turning insert designed for finishing and medium‑to‑heavy turning of stainless steel and heat‑resistant superalloys, providing reliable chip control and long tool life. Tiger‑tec Silver coated performance WSM01 grade for stainless and superalloys Rhombic 35° geometry for versatile turning 0.8 mm corner radius for edge stability Greater productivity through tailored grade and coating The combination of the WSM01 coated‑carbide grade and the Tiger‑tec Silver series offers a clear productivity advantage when machining difficult materials. The coating improves heat resistance and reduces built‑up edge, while the substrate maintains a robust cutting edge; together this yields longer tool life and fewer insert changes in batch production. For process planners this translates into measurable gains: fewer interruptions, more consistent cycle times and better overall equipment utilisation when turning stainless steel or high‑temperature alloys. Geometry engineered for surface quality and edge security The Rhombic 35° form with a 0.8 mm corner radius and 7° clearance angle balances cutting force and tool strength to deliver repeatable surface finish with improved flank protection. The MM4 chipbreaker promotes short, controllable chips under varying feeds, which reduces the risk of chip entanglement and tool nose damage. In practical terms, the geometry reduces vibration tendency during interrupted cuts and supports predictable tool life, helping maintain part tolerances and reduce rework rates. Clear application scope and process reliability Designed primarily for ISO groups M and S, this insert is suitable for stainless steel and heat‑resistant superalloys and can be specified where stable chip formation and thermal resistance are required. The tolerance class G signals consistent dimensional quality for reliable clamping in indexable toolholders. For production engineers, the benefit is a reproducible machining process with less trial‑and‑error when transferring programs between machines. Complementary process data from Metav Werkzeuge can be requested to match speeds and feeds to the chosen workpiece material and machine capability. Contact Metav Werkzeuge for tailored cutting data, application advice and to secure Tiger‑tec Silver WSM01 inserts—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VCGT160408‑MM4‑WSM01‑WALTER Article designation: VCGT160408‑MM4 WSM01 Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Clearance angle: 7° Geometry: Rhombic 35° Size: 16 Tolerance class: G Special features Series/coating: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MM4 Suitable for: stainless steel (M), heat‑resistant superalloys / titanium (S) Execution: T FAQ What materials is this insert intended for? The insert is specified for stainless steel and heat‑resistant superalloys; the WSM01 grade and Tiger‑tec Silver coating support stable chip formation and thermal resistance in these material groups. What does MM4 chipbreaker achieve? The MM4 chipbreaker on the VCGT160408‑MM4 WSM01 promotes short, controllable chips and consistent evacuation, reducing chip interference and protecting the cutting edge during continuous and interrupted cuts. Which geometry benefits are provided by the Rhombic 35° shape? Rhombic 35° geometry allows versatile turning applications with a favourable balance between approach angle and radial engagement, helping to achieve consistent surface finish and easier chip flow. Is this insert suitable for interrupted cuts or roughing operations? With a 0.8 mm corner radius and robust WSM01 substrate, the insert provides increased edge strength suitable for many interrupted and medium‑duty roughing operations, while still delivering good finishing capability. How can I obtain cutting data for specific alloys? Metav Werkzeuge offers tailored cutting data and application support for the VCGT160408‑MM4 WSM01; contact them via info@metav-werkzeuge.com or +49 2822 7131930 for material‑specific recommendations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanation only and do not indicate any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer.
VCGT160408-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of proven cutting performance, robust chip control and the Tiger·tec Silver coating for dependable productivity in demanding turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for process recommendations. VCGT160408-MM4 WSM20S turning indexable insert by Walter Tools — Tiger·tec Silver, 7° clearance The VCGT160408-MM4 WSM20S is a rhombic 35° turning insert engineered for the machining of stainless steel and heat-resistant superalloys in demanding industrial environments. VCGT160408-MM4 WSM20S by Walter Tools Tiger·tec Silver coated grade for hard-to-cut materials Rhombic 35° geometry with 0.8 mm corner radius 7° clearance for stable cutting and chip control Designed for consistent performance on stainless steel and superalloys The insert combines a wear-resistant Tiger·tec Silver coating with a substrate optimised for toughness, delivering repeatable cutting life when machining stainless steel and similar difficult-to-cut materials. The specified grade WSM20S supports stable edge behaviour, which reduces the frequency of tool changes and contributes to predictable cycle times. Translating coating technology into shop-floor advantage, the grade balances thermal resistance and edge strength so that cutting parameters can be raised without compromising component quality. Geometry that improves process reliability and surface result A rhombic 35° shape and a 0.8 mm corner radius provide a reliable compromise between edge strength and versatility, allowing for both roughing and light finishing passes with one insert geometry. The 7° clearance angle reduces rubbing and heat build-up at the flank face, which helps to maintain dimensional accuracy and surface finish over longer production runs. By choosing the appropriate feed and depth of cut, the geometry supports controlled chip formation and reduces the risk of built-up edge on tougher materials. Chip control and cutting stability with a dedicated chipbreaker The MM4 chipbreaker is tuned to promote manageable chip shapes in interrupted and continuous cuts, simplifying evacuation and reducing rework. Stable chip formation directly affects tool life and machine availability: consistent chips decrease secondary damage to the insert and workpiece, making the cutting process more efficient. For shops aiming to improve overall throughput, the combination of the chipbreaker design and the coated grade supports higher metal removal rates while maintaining process security. Practical handling and integration into turning cells The insert’s standard ISO designation and format allow straightforward integration into existing toolholders and tool management systems, minimising retooling effort. The tolerance class G ensures interchangeability and predictable seating in precision toolholders. Using this insert in systematic tool-change strategies reduces setup time and supports consistent part-to-part quality. For production environments that require traceability and predictable replacement cycles, the combination of proven grade and standardised geometry simplifies inventory management. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and to discuss suitable grades for specific stainless steel applications: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: VCGT160408-MM4-WSM20S-WALTER Article: VCGT160408-MM4 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Data Clearance angle: 7° Corner radius: 0.8 mm Inscribed circle / size: 16 mm Thickness code: 04 Tolerance class: G UID: VCGT160408-MM4-WSM20S-WALTER Special features Geometry: Rhombus 35° Chipbreaker: MM4 Coating: Tiger·tec Silver Material designation: S / M Application: stainless steel and heat-resistant superalloys FAQ What materials is this insert best suited for? The VCGT160408-MM4 WSM20S insert from Walter Tools is intended primarily for stainless steel and for heat-resistant superalloys classified under S, offering a good compromise between thermal resistance and edge stability. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the VCGT160408-MM4 WSM20S enhances thermal stability and wear resistance, which typically extends cutting life and supports higher cutting speeds compared with uncoated grades. Can the same insert be used for roughing and finishing? Thanks to the rhombic 35° geometry and the 0.8 mm corner radius, the insert is suitable for a range of operations from robust roughing to light finishing, provided cutting parameters are adapted accordingly. Does the MM4 chipbreaker suit interrupted cuts? Yes, the MM4 chipbreaker is designed to produce controllable chip forms in both continuous and interrupted machining, improving evacuation and reducing the chance of chip entanglement. Is the insert compatible with standard toolholders? The insert follows the common ISO-style designation, so VCGT160408-MM4 WSM20S fits standard toolholders made for this insert family and tolerance class. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a recognised manufacturer of precision cutting tools and belongs to the Sandvik group. Trade names and trademarks are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
VCGT160408-MN2 WN10 MN2 Wendeplatten - Walter Tools
The VCGT160408-MN2 WN10 insert combines a compact Rhombic 35° geometry with a dedicated MN2 chipbreaker and a 0.8 mm corner radius to deliver stable, repeatable turning performance. Order original Walter Tools inserts via Metav Werkzeuge or request application advice from our consultants for the best grade selection. VCGT160408-MN2 WN10 — Indexable turning insert (Rhombic 35°, 0.8 mm) by Walter Tools The VCGT160408-MN2 WN10 is an indexable turning insert designed for general turning operations, offering a Rhombic 35° shape and an MN2 chipbreaker for controlled chip formation. Rhombic 35° insert geometry MN2 chipbreaker for consistent chips 0.8 mm corner radius for robust edges 7° clearance angle for secure cutting Predictable geometry for consistent machining results The Rhombic 35° form together with a 0.8 mm corner radius gives a dependable cutting profile that supports stable engagement and low vibration in many turning tasks. The combination of geometry and corner radius helps to distribute cutting forces, which reduces the risk of premature edge failure and supports longer, more predictable tool life. For production environments where repeatability matters, this insert geometry contributes to dimensional stability and consistent surface quality across batches. Controlled chip formation and surface integrity Equipped with the MN2 chipbreaker, the insert is engineered to manage chips effectively under typical turning conditions. The chipbreaker promotes short, broken chips that clear the cutting zone, reducing the likelihood of entanglement and improving operator safety. Better chip control also assists in maintaining a clean machined surface, translating the chip management design directly into improved finishing and less manual rework after turning operations. Material class and grade explained for selection The grade WN10 is an uncoated carbide formulation supplied in the Walter Tools open grade series; suitability for specific workpiece materials should be verified against the product matrix. The uncoated substrate provides a balance between edge robustness and general-purpose performance, making it a practical choice where coated grades are unnecessary or where coating interactions are undesirable. Consultation of the grade matrix or Metav Werkzeuge’s application advice ensures the correct grade match for a given component material and cutting regime. Integration and process benefits in a tooling system As an indexable insert in the VCGT format, the component is compatible with toolholders designed for the ISO VCGT family, enabling straightforward replacement and indexing during operation. The 7° clearance angle provides reliable relief behind the cutting edge, which helps to avoid rubbing and promotes efficient material removal. Incorporating such an insert into a standard turning cell supports predictable cycle times and simplifies spare-part management due to common form and seating dimensions. Practical considerations for users and workshops The compact design and proven chip control reduce interruptions from chip issues and lower the need for frequent tool changes. For workshops seeking economic and robust inserts for general turning tasks, the combination of a Rhombic 35° geometry and the MN2 chipbreaker provides a pragmatic balance of performance and ease of use. Where uncertain about compatibility with a specific workpiece material or process parameter, check the product matrix or contact Metav Werkzeuge for tailored recommendations. Contact Metav Werkzeuge for application guidance and availability of the Walter Tools VCGT160408-MN2 WN10 insert and to confirm the correct grade for the intended machining task Technical data SKU: VCGT160408-MN2-WN10-WALTER Product: indexable turning insert Brand: Walter Tools ISO designation: VCGT160408-MN2 WN10 Series: Walter Schneidstoffsorte - Serie offen Core dimensions and numbers Insert size: 16 Corner radius: 0.8 mm Clearance angle: 7° Thickness code: 04 Tolerance class: G Special features and versions Uncoated carbide grade WN10 Chipbreaker type MN2 Rhombic 35° plate form Execution: T Sort and series description: WN10 uncoated carbide — check product matrix for material suitability FAQ What workpiece materials is this insert suitable for? The WN10 grade is an uncoated carbide in the Walter Tools open series; suitability for specific workpiece materials should be verified in the product matrix or with Metav Werkzeuge’s application guidance. How does the MN2 chipbreaker affect performance? The MN2 chipbreaker promotes controlled, short chips that evacuate reliably from the cutting zone, improving surface quality and reducing the risk of chip entanglement during turning. Which toolholders accept this insert form? The insert follows the VCGT family geometry; holders compatible with ISO VCGT 16 inserts will accept this Rhombic 35° part when mounted according to the holder’s clamping specifications. How often can the insert be indexed or rotated? Indexing frequency depends on application severity and edge wear; the Rhombic design typically affords multiple indexes before replacement, but monitoring for wear is recommended to maintain part quality. Is the WN10 grade coated? The WN10 description in the Walter Tools open series indicates an uncoated carbide grade; for coated alternatives or different grades, consult Metav Werkzeuge for options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation with the seller. The offered article is an original, factory-new product of the manufacturer Walter Tools.
VCGT160408-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise 35° rhombic geometry, a 0.8 mm nose radius and the MN2 chipbreaker to achieve consistent chip control and repeatable surface quality; order directly via Metav Werkzeuge or consult the team for application-specific advice. VCGT160408-MN2 WNN10 — Turning insert, Rhombus 35° / 0.8 mm radius | Walter Tools A VCGT160408-MN2 WNN10 turning insert designed for precision finishing and reliable chip control in medium-duty turning applications. Rhombus 35° geometry for versatile cuts 0.8 mm corner radius for consistent surface finish MN2 chipbreaker for controlled chip formation Coated carbide grade WNN10 for good edge life Stable cutting geometry for repeatable results The rhombic 35° geometry combined with a 7° clearance creates a cutting geometry that stabilises tool engagement and reduces vibration in many turning operations. This geometry supports predictable cutting forces, which translates into consistent surface quality and reduced rework. For shops running serial production, the shape and tolerance class G help maintain dimensional consistency between insert changes and keep setup times low. Controlled chip formation and improved tool life Equipped with the MN2 chipbreaker and the WNN10 coated carbide grade, the insert promotes short, segmental chips in common turning tasks. The chipbreaker design reduces chip entanglement and supports reliable evacuations, which is particularly beneficial in automated turning centres. Coating properties of the WNN10 grade enhance wear resistance and contribute to reliable edge life, meaning fewer interruptions for insert changes and more productive machining cycles. Practical versatility for workshop workflows With an ISO designation of VCGT160408-MN2 and a nominal plate size of 16 plus a plate thickness of 04, the insert integrates with standard ISO toolholder systems and is suitable for a range of finishing and light-roughing operations. The catalogue-dependent substrate information ensures the right combination of toughness and hardness for specific materials; engineers are advised to consult the product matrix for optimal grade selection. This modular compatibility reduces tooling complexity across mixed-production environments. Clear specifications that aid process planning Key numerical features such as the 0.8 mm nose radius and the 7° relief are immediately useful for calculating engagement, feed, and expected surface roughness. The MN2 chipformer supports material-specific chip control strategies, while the tolerance class G indicates consistent manufacturing accuracy for reliable interchangeability. Using this insert supports a rational approach to process optimisation: fewer unknowns, easier parameter transfer and faster ramp-up in production runs. For machining tasks requiring dependable chip control and repeatable finishes, request specification assistance or secure supply through Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCGT160408-MN2-WNN10-WALTER Label: Drehwendeschneidplatte VCGT160408-MN2 WNN10 Walter Tools Product type: Drehwendeschneidplatte ISO designation: VCGT160408-MN2 WNN10 Facts Plate size: 16 Plate thickness: 04 Plate form: Rhombus 35° Corner radius: 0.8 mm Relief angle: 7° Tolerance class: G Special features Chipbreaker: MN2 Grade: WNN10 (coated carbide) Series: Walter Schneidstoffsorte - Serie offen Substrate / material: Katalogabhängig Execution: T FAQ What applications suit this insert best? This insert is intended for finishing and medium-duty turning; the VCGT160408-MN2 WNN10 excels where controlled chip formation and consistent surface quality are required. Which toolholders are compatible with this ISO designation? Any toolholder designed for the ISO VCGT family and 16 mm nominal insert size will accept the VCGT160408-MN2 WNN10 insert, provided the holder matches the rhombic 35° seating. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on the WNN10 grade promotes short, controllable chips, improving chip evacuation and reducing the risk of built-up edge in continuous turning operations. Is the substrate information fixed or variable? Substrate and coating details are catalogue-dependent; the WNN10 designation denotes a coated carbide grade, so consult the product matrix for the exact substrate recommended for specific workpiece materials. What tolerance can be expected on the insert? The insert is produced to tolerance class G, ensuring consistent dimensional interchangeability between inserts and reduced setup variation. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCGT160408-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Take advantage of the combination of a wear-resistant coated grade, stable edge geometry and reliable chip control for predictable productivity in demanding turning tasks; order the insert directly via Metav Werkzeuge or ask our consultants if needed. VCGT160408-MN2 WSM01 — Turning indexable insert, Tiger‑tec Silver, rhombic 35° (Walter Tools) The VCGT160408-MN2 WSM01 is a coated turning insert designed for demanding turning applications on difficult-to-machine alloys and stainless steels, offering durable cutting performance in serial production. Tiger‑tec Silver coated grade WSM01 Suitable for stainless steels and superalloys Chipbreaker MN2 for controlled chip formation 0.8 mm corner radius for robust cutting edge High-performance grade for difficult-to-machine materials The insert uses the WSM01 grade from the Tiger‑tec Silver series, a coated carbide designed to balance wear resistance and edge stability. That balance supports secure chip formation when machining materials that tend to work-harden or form built-up edges. In practice, the combination of coating and substrate reduces flank and crater wear, which contributes to more predictable tool life and fewer unscheduled stoppages in continuous turning operations. The formulation is particularly advantageous where consistent cutting performance is required across batches. Geometry engineered for surface quality and tool security The 35° rhombic shape with a 0.8 mm corner radius and a 7° relief angle provides a versatile geometry that resists chipping while maintaining good surface finish on the workpiece. The small corner radius strengthens the cutting edge for interrupted or heavy cuts, while the relief geometry helps reduce rubbing and heat generation. The incorporated chipbreaker MN2 is tuned to break and evacuate chips effectively in turning processes, decreasing the risk of entanglement and improving operator safety. These geometric choices mean fewer regrinds and a more reliable machining window for production. Productivity benefits and predictable results This insert is aimed at applications where process security and repeatable outcomes are priorities. The robust grade and proven geometry enable longer periods between index changes and contribute to longer edge life, reducing tooling-related downtime. As a result, shops can maintain stable cycle times and consistent part quality. Integration into standard turning toolholders is straightforward because the insert follows common ISO designation conventions, enabling quick toolset-up and simplification of inventory management for toolrooms. Practical application guidance and selection notes Intended for turning operations on materials classified in groups M and S, the insert is suited to machining stainless steels and heat-resistant alloys. The code and geometry are compatible with holders specified for VCGT-style inserts; the VCGT160408-MN2 WSM01 designation helps ensure the correct match. For best results, select cutting data that emphasises stable engagement and controlled cutting forces rather than maximal metal removal rate on first trials. If process conditions vary significantly, consult technical advisers for grade and geometry recommendations to match the specific alloy and operation. For reliable turning of stainless steels and superalloys using Walter Tools’ Tiger‑tec Silver grade, contact Metav Werkzeuge for application advice and availability — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: VCGT160408-MN2-WSM01-WALTER Designation: Drehwendeschneidplatte VCGT160408-MN2 WSM01 Walter Tools Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 ISO designation: VCGT160408-MN2 WSM01 Core technical data Relief angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 35° Insert size: 16 Thickness code: 04 Chipbreaker: MN2 Tolerance class: G Special features Coated carbide grade suitable for tough alloys Material groups: S / M (superalloys/titanium; stainless steels) Stable cutting edge and optimised chip control Series benefits: Tiger‑tec Silver wear and edge-life characteristics FAQ Which materials is this insert suitable for? The VCGT160408-MN2 WSM01 is formulated for machining stainless steels and heat-resistant superalloys (ISO groups M and S), where chip control and edge stability are critical. What role does the MN2 chipbreaker play? The chipbreaker MN2 controls chip form and evacuation during turning, reducing the risk of long, stringy chips and improving process safety with the VCGT160408-MN2 WSM01 insert. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for interrupted or heavy cuts while supporting a stable surface finish; it is a compromise between robustness and fine-detail geometry. Is this insert compatible with standard VCGT toolholders? The insert follows the common ISO designation (VCGT160408), so it fits toolholders designed for this family of rhombic turning inserts; confirmation with holder specifications is recommended. How does the Tiger‑tec Silver series benefit production? The Tiger‑tec Silver series offers a coated substrate that extends edge life and supports consistent wear behaviour, which helps maintain cycle times and reduces tool-change frequency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT160408FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 polycrystalline-diamond grade and the stabilising geometry to achieve long tool life and consistent surface quality in non-ferrous and abrasive non-ferrous machining; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. VCGT160408FS-1 WDN10 Turning indexable insert – PKD, Rhombus 35° (Walter Tools) VCGT160408FS-1 WDN10 is a PKD-tipped turning indexable insert designed for precision machining of non-ferrous and abrasive non-ferrous materials PKD grade WDN10 for abrasive non-ferrous Rhombus 35° for versatile turning 7° clearance angle for secure cutting Corner radius 0.8 mm for improved finish Durable cutting performance for abrasive non-ferrous materials The WDN10 cutting grade uses polykrystalliner Diamant (PKD) to provide outstanding wear resistance when machining abrasive, non-ferrous alloys and composite materials. PKD is a synthetic diamond layer bonded to a substrate that significantly extends tool life compared with conventional carbides when used in the correct applications. This makes the insert particularly suitable where long runtimes and consistent dimensional control are required, reducing downtime for tool changes and improving overall process efficiency. Geometry that stabilises cuts and improves surface quality The Rhombus 35° form combined with a 7° clearance angle and a corner radius of 0.8 mm stabilises the cutting edge and reduces vibration in interrupted or light-turning operations. A small corner radius balances strength and surface finish: it supports a reliable edge for longer life while helping to maintain an improved finished surface. The insert geometry also supports predictable chip flow when paired with appropriate holders and speeds, enabling reproducible results across batches. Product series and application guidance for reliable selection This insert belongs to the Walter cutting-grade series marked as open series and carries the designation VCGT160408FS-1 WDN10. The grade is optimised for non-ferrous and other abrasive, non-iron materials; suitability for a specific job should be verified against the manufacturer's product matrix. Checking the recommended cutting parameters and matching insert grade to workpiece material will ensure process reliability and the best balance between productivity and tool life. Handling and workshop integration for efficient use The insert format is compatible with common indexable insert clamping systems for turning tools; its design supports straightforward indexing and replacement to minimise machine downtime. The PKD layer requires appropriate cutting data and stable setups to prevent chipping of the diamond layer; when used under recommended conditions the insert reduces the frequency of tool changes and contributes to a more economical production flow. For materials outside the stated scope, refer to the product matrix before application. For application advice or stock availability of Walter Tools PKD inserts, contact Metav Werkzeuge – our specialists are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VCGT160408FS-1-WDN10-WALTER SKU: VCGT160408FS-1-WDN10-WALTER Product designation: VCGT160408FS-1 WDN10 Manufacturer: Walter Tools Facts Clearance angle: 7° Plate form: Rhombus 35° Corner radius: 0.8 mm Plate size: 16 Chipbreaker: 1 Thickness code: 04 Special features Cutting grade: WDN10 (PKD) Series: Walter cutting-grade series – open series Execution code: T Tolerance class: G Material information: catalogue dependent Application note: Check product matrix for material suitability FAQ What materials is this insert primarily intended for? The insert with the WDN10 grade is intended primarily for non-ferrous and abrasive non-ferrous materials; the VCGT160408FS-1 WDN10 excels where PKD tooling is required. Can this PKD insert be used on steel or stainless steel? PKD inserts like WDN10 are generally not recommended for conventional steels or stainless steel; suitability should be verified in the product matrix before attempting such applications. How does the corner radius affect surface finish? A corner radius of 0.8 mm increases edge strength and helps produce a smoother finished surface while maintaining robustness under intermittent cuts. What does the chipbreaker specification mean in practice? The chipbreaker setting (code 1) influences chip formation and evacuation; paired with correct cutting data it supports controlled chips and stable machining. Is there a specific series-related recommendation for cutting data? Refer to the Walter cutting-grade series documentation and the product matrix for recommended speeds and feeds tailored to the VCGT160408FS-1 WDN10 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are cited for explanation only; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
VCGT160408M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control and Cermet wear resistance for consistent turned parts and extended tool life; the geometry and tolerance class support repeatable results in serial production. Order the VCGT160408M-FP2 WEP10C directly via Metav Werkzeuge or consult our specialists for application-specific selection. VCGT160408M-FP2 WEP10C – Indexable turning insert, Rhombus 35°, FP2 chipbreaker (Walter Tools) The VCGT160408M-FP2 WEP10C is an indexable turning insert from the Walter Cermet series designed for precision turning where predictable chip formation and dimensional stability are essential Rhombus 35° geometry Cermet grade WEP10C FP2 chipbreaker for chip control 0.8 mm corner radius Consistent chip control for stable production The FP2 chipbreaker provides predictable chip formation, reducing interruptions and easing chip handling in automated or manual turning operations. A defined chipbreaker geometry channels swarf reliably, which lowers the risk of entanglement and allows longer uninterrupted cycles. For production planners this translates into improved uptime and reduced handling time per component, supporting a more efficient process chain. Geometry and tolerance for repeatable precision The Rhombus 35° shape and 0.8 mm corner radius deliver a balance between accessibility in tight radii and surface integrity on the workpiece flank. The 7° relief contributes to a controlled cutting engagement, while tolerance class G ensures consistent fitment in standard tool holders. Together these attributes support repeatable part tolerances and a predictable surface finish, which is beneficial when switching between serial batches or mating components. Cermet grade and selection guidance The insert is supplied in the Walter Cermet family with the WEP10C grade, a cermet formulation intended for wear resistance and thermal stability during finishing operations. Cermet materials often give improved edge life and surface quality compared with conventional grades for light to moderate depths of cut. Check the product matrix for concrete workpiece suitability, as material compatibility depends on the specific cutting data and machining strategy. Contact Metav Werkzeuge today to discuss Walter Tools cermet inserts and determine whether the VCGT160408M-FP2 WEP10C is the best fit for the intended turning application Technical data SKU: VCGT160408M-FP2-WEP10C-WALTER Label: Drehwendeschneidplatte VCGT160408M-FP2 WEP10C Walter Tools Manufacturer / Brand: Walter Tools Series: Walter Cermet Grade: WEP10C Article designation: VCGT160408M-FP2 Numbers / Facts Inscribed circle / size: 16 Thickness designation: 04 Corner radius: 0.8 mm Relief / free angle: 7° Tolerance class: G Special features Chipbreaker: FP2 Geometry: Rhombus 35° Execution: T Material: Katalogabhängig ISO designation: VCGT160408M-FP2 WEP10C FAQ What cutting tasks is this insert optimised for? The VCGT160408M-FP2 WEP10C is optimised for precision turning operations where predictable chip control and fine surface finish are required; suitability for specific materials should be verified in the product matrix. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker on the WEP10C grade shapes chips into short, controllable segments, improving machine availability and reducing swarf-related interruptions during continuous turning cycles. Can the insert be used for roughing and finishing? As a cermet grade, WEP10C is primarily targeted at finishing and light to moderate finishing passes where wear resistance and surface quality are priorities; heavy roughing is generally outside its optimal use range. Which toolholders accept this insert? The insert follows the standard VCGT geometry and tolerance class G, so it fits compatible toolholders designed for 16-size rhombic 35° inserts; confirm holder compatibility before ordering. How to confirm material compatibility for a specific job? Refer to the Walter Cermet product matrix and cutting data; if uncertainties remain, Metav Werkzeuge can provide additional application guidance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools and other mentioned trademarks are the property of their respective owners and are used here for identification and explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
VCGT160412-MN2 WN10 Wendeplatten - Walter Tools
Benefit from precise chip control, a robust uncoated carbide grade and the compact Rhombus 35° geometry for consistent turning performance and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our technical advisers for machining recommendations. VCGT160412-MN2 WN10 — Turning insert, Rhombus 35° with MN2 chipbreaker | Walter Tools The VCGT160412-MN2 WN10 is a Rhombic 35° turning insert designed for standard turning operations where controlled chip formation and repeatable edge life are required Rhombic 35° geometry for versatile turning MN2 chipbreaker for controlled chip formation 7° clearance for reduced rubbing and stable cuts 1.2 mm corner radius for improved edge strength Consistent surface quality through controlled chip formation The insert combines a Rhombus 35° form with an engineered MN2 chipbreaker, delivering predictable chips even under varying cut depths. The uncoated WN10 carbide grade provides a neutral cutting behaviour that is easy to adapt across different feed and speed settings, making these indexable inserts a practical choice for shops seeking repeatable finishes. This geometry and chip control reduce the need for rework, supporting higher first-pass yields and fewer tool changes. Stable cutting performance and durable edge geometry A 7° clearance reduces flank rubbing and helps maintain a consistent cutting angle, while the 1.2 mm corner radius increases edge strength for interrupted cuts and light roughing. The insert’s tolerance class G supports reliable seating in the toolholder, which contributes to dimensional consistency and longer insert life. These technical attributes translate into lower process variability and more predictable maintenance intervals for production environments. Integration into the toolroom and material guidance Designed as an indexable turning solution, the insert fits standard holders for the 16 mm inscribed circle and offers straightforward replacement and toolpath setup. The cutting grade is listed as uncoated carbide and the detailed material suitability should be checked against the product matrix; the WN10 variety is catalogued as a general-purpose carbide, so verify application compatibility for specialised materials. For application-specific strategies or to optimise feeds and speeds, Metav Werkzeuge provides machining consultation and detailed data upon request. Contact Metav Werkzeuge for tailored cutting recommendations and to source Walter Tools VCGT160412-MN2 WN10 inserts; technical advice is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VCGT160412-MN2-WN10-WALTER Designation: VCGT160412-MN2 WN10 Manufacturer: Walter Tools Product type: Turning insert (indexable) Facts Inscribed circle / size: 16 Thickness code: 04 Clearance angle: 7° Corner radius: 1.2 mm Tolerance class: G Special features Chipbreaker: MN2 Carbide grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Form: Rhombus 35° Material information: Katalogabhängig FAQ Is this insert suitable for both finishing and light roughing? The VCGT160412-MN2 WN10 insert can be used for finishing and light roughing applications; the MN2 chipbreaker and 1.2 mm corner radius provide a balance between edge strength and surface quality, but final suitability depends on the workpiece material and cutting parameters. Which toolholders accept this insert? Holders designed for VCGT-style indexable inserts and a 16 mm inscribed circle accept this geometry; compatibility with specific toolholder models should be confirmed prior to ordering. Can this insert machine stainless steel or exotic alloys? The WN10 is an uncoated carbide grade. Material suitability is not universally guaranteed; consult the product matrix or Metav Werkzeuge’s technical advisers to confirm whether this grade is appropriate for specific stainless steels or exotic alloys. What is the nominal corner radius and clearance angle? The insert has a 1.2 mm corner radius and a 7° clearance angle, values that favour durable edges and reduced flank contact during turning. Is the carbide coated? This insert is supplied in the uncoated WN10 carbide grade as specified; coating information is noted as catalogue-dependent where applicable. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGT160412-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the coated carbide WNN10 grade together with the rhombic 35° geometry and 7° clearance for consistent chip control and robust edge life; order genuine Walter Tools inserts directly via Metav Werkzeuge or consult our technical team for application-specific guidance. VCGT160412-MN2 WNN10 — indexable turning insert, rhombic 35° geometry, 7° clearance (Walter Tools) The VCGT160412-MN2 WNN10 is a coated carbide indexable insert engineered for versatile turning applications where stable cutting performance and reliable chip control are essential Coated carbide grade WNN10 for broad workpiece range Rhombic 35° geometry for versatile turning 7° clearance and 1.2 mm corner radius for stability MN2 chipbreaker optimised for reliable chip control Maximised process reliability through material and geometry The coated carbide WNN10 grade delivers a balanced combination of wear resistance and edge strength, which supports sustained cutting performance on a wide spectrum of workpiece materials. Combined with the rhombic 35° geometry, the insert enables adaptable cutting directions and suitable approach angles for both roughing and light finishing cuts. The modest 7° clearance reduces rubbing on the flank while maintaining contact stability, and this geometry helps preserve tool life under varying cutting conditions. These technical choices translate directly into fewer tool changes and more predictable cycle times on the shop floor. Precise chip control and surface quality for efficient turning The MN2 chipbreaker is tailored to produce controlled chip forms at typical metal-cutting feeds, reducing risk of entangling long chips and supporting automated handling or machining centres. The 1.2 mm corner radius increases edge robustness and contributes to consistent workpiece integrity and surface finish, especially on interrupted cuts or when machining slightly unstable set-ups. Using a well-matched toolholder and correct clamping ensures the insert’s geometry can be exploited fully, leading to reduced rework and improved overall productivity. Practical handling, repeatability and series characteristics Manufactured to tolerance class G and available in execution T, the insert is supplied as part of the Walter cutting-grade series — an open series offering coated carbide performance. The design supports straightforward indexing and replacement, and the standard dimensions make integration into common turning toolholders straightforward. For users seeking stable, repeatable results, the combination of the grade, geometry and chipbreaker offers a pragmatic route to improved throughput and consistent component quality while keeping process setup times low. Contact Metav Werkzeuge for tailored application advice and to secure genuine Walter Tools VCGT160412-MN2 WNN10 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to check compatibility and availability Technical data Article number: VCGT160412-MN2-WNN10-WALTER Designation: VCGT160412-MN2 WNN10 Manufacturer: Walter Tools Product type: Indexable turning insert Core dimensions Insert size: 16 Thickness: 0.4 mm (04) Corner radius: 1.2 mm Clearance angle: 7° Insert form: Rhombus 35° Special features Grade: WNN10 (coated carbide) Chipbreaker: MN2 Series: Walter Schneidstoffsorte - Serie offen Execution: T Tolerance class: G Material specification: catalogue dependent FAQ What materials is this insert suited for? The VCGT160412-MN2 WNN10 insert is specified for a broad range of workpiece materials according to the product matrix; the WNN10 grade is a coated carbide designed to offer general-purpose performance, so check the cutting data matrix for precise material-match guidance. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on the indexable insert promotes compact, controlled chips at typical turning feeds, improving chip evacuation and reducing the likelihood of long, hazardous chips in automated or manual operations. What are the key setup considerations for achieving good tool life? Correct clamping in a compatible turning toolholder, adherence to recommended cutting parameters for the WNN10 grade, and maintaining correct approach angles for the rhombic 35° geometry will ensure the insert reaches its expected service life. Is the insert compatible with standard toolholders and indexable systems? The geometry and ISO designation match common insert pocket designs; the VCGT160412-MN2 WNN10 is intended for standard indexable turning holders that accept rhombic 35° inserts. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands; the offered article is an original, factory-new product of the manufacturer.
VCGW110302EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the CBN cutting-grade and the rhombic 35° geometry for consistent finishing and extended tool life; select this insert to improve process stability in hard-material turning and consult Metav Werkzeuge for application support. VCGW110302EM-2 WBS10 — indexable turning insert, CBN grade, Rhombic 35° (Walter Tools) The VCGW110302EM-2 WBS10 is an indexable turning insert engineered for high-wear and hardened-material machining, offering a combination of wear resistance and defined geometry for reliable finishing operations CBN grade for high-wear machining Rhombic 35° cutting geometry 0.2 mm nose radius for fine finishes 7° clearance angle for stable cutting Durable CBN performance for hardened components The main advantage of the insert lies in its CBN composition. Cubic boron nitride is a superabrasive designed for machining hardened steels and other hard, abrasive materials; this results in significantly improved wear resistance compared with conventional carbide grades. For production environments where insert life and consistent surface quality matter, the CBN grade reduces the frequency of index changes and supports steady machining cycles. The hardened-material suitability should be verified against the product matrix to ensure optimal results. Geometry tuned for surface quality and chip handling The rhombic 35° format paired with a 0.2 mm nose radius and a 7° clearance angle delivers a precise contact area and controlled cutting forces. The modest nose radius is suited to fine finishing where dimensional accuracy and low surface roughness are priorities, while the clearance angle supports stable engagement without excessive rubbing. The built-in chip control (chipbreaker 2) promotes predictable chip formation, aiding coolant access and easing swarf evacuation in automated turning centres. Integration into productive turning strategies Belonging to the Walter CBN / Hartstoff series and specified as WBS10, this insert is intended for process-oriented use in demanding applications. The product's tolerance class (G) and standard form make it compatible with typical toolholders designed for rhombic inserts. When pairing the insert with turning parameters, focus on slower cutting speeds and steady feeds appropriate for CBN to exploit its wear characteristics and maintain surface integrity. If application conditions are unclear, technical consultation is recommended to match insert characteristics with the workpiece material and machining strategy. For application advice and availability of Walter Tools CBN inserts, contact Metav Werkzeuge for tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCGW110302EM-2-WBS10-WALTER Label: Drehwendeschneidplatte VCGW110302EM-2 WBS10 Walter Tools Manufacturer: Walter Tools Product type: indexable turning insert ISO designation: VCGW110302EM-2 WBS10 Core technical data Free angle: 7° Corner radius: 0.2 mm Plate size: 11 mm Plate thickness code: 03 Chipbreaker: 2 Tolerance class: G Special features Series: Walter CBN / Hartstoff Grade: WBS10 (CBN cutting material) Plate form: Rhombus 35° axite enrichment note: suitability for hardened steels, cast iron or superalloys subject to product matrix verification FAQ What materials is this insert suitable for? The VCGW110302EM-2 WBS10 insert uses a CBN grade designed primarily for hardened steels and similar high-wear materials; suitability for cast iron or superalloys should be checked against the product matrix. How does CBN compare to carbide for turning? CBN offers superior wear resistance and thermal stability on hardened components compared with carbide, meaning longer tool life and more consistent finishes when used under appropriate cutting conditions. Which geometry benefits finishing operations? The rhombic 35° form with a 0.2 mm nose radius and 7° clearance angle is optimised for dimensional accuracy and surface quality, making it well suited to finishing passes on hardened workpieces. Is there guidance for selecting cutting parameters? The insert performs best with cutting strategies adapted to CBN: moderate feeds and controlled cutting speeds to exploit the grade’s wear characteristics and ensure process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGW110302FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Benefit from the wear-resistant PCD grade and the precise Rhombic 35° geometry for consistent, high-quality turning of abrasive non-ferrous materials; combine long tool life with predictable chip control to reduce downtime and scrap. Order the insert directly via Metav Werkzeuge or ask the consultants for application support and availability. VCGW110302FS-1 WDN10 – turning indexable insert, PKD grade, Rhombic 35° by Walter Tools A VCGW110302FS-1 WDN10 turning insert designed for precision machining of abrasive, non-ferrous materials using a polycrystalline diamond cutting grade. PKD grade for abrasive non-ferrous materials Rhombic 35° geometry for stable cutting 0.2 mm corner radius for fine surface finish 7° relief angle for controlled chip flow Consistent wear resistance where it matters The key advantage of the insert is its polycrystalline diamond (PCD) cutting material, specified here as the WDN10 grade. This highly wear‑resistant grade prolongs tool life when machining abrasive non-ferrous metals and composites, reducing tool changes and process interruptions. The combination of PCD and a robust substrate results in predictable performance across long production runs, which supports cost-efficiency and process stability in serial turning operations. Geometry that improves stability and surface quality The rhombic 35° insert geometry with a 0.2 mm corner radius and a 7° relief angle is engineered for stable engagement and controlled cutting forces. The small corner radius enables improved surface finish and finer detail work, while the relief angle assists chip formation and evacuation. Together, these geometry features reduce vibration and help maintain repeatable part tolerances, which is particularly valuable in high-precision and finish-sensitive applications. Practical application guidance and process reliability This insert is intended primarily for abrasive, non-ferrous materials; the WDN10 (PCD) grade is optimised for such use, but suitability should be verified against the specific workpiece and process matrix. The insert’s chipbreaker and geometry aim to provide consistent chip control and reduced built-up edge, promoting longer uninterrupted cuts and fewer rejects. For tailored cutting data, Metav Werkzeuge can provide feed and speed recommendations based on workpiece material and machining strategy. For demanding non-ferrous machining tasks, choose the Walter Tools WDN10 grade and contact Metav Werkzeuge for availability and tailored technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VCGW110302FS-1-WDN10-WALTER Item label: Drehwendeschneidplatte VCGW110302FS-1 WDN10 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Execution: W Material: Katalogabhängig Facts Size: 11 Thickness: 03 Relief angle: 7° Corner radius: 0.2 mm Chipbreaker: 1 Tolerance class: G Special features Cutting material: polycrystalline diamond (PCD) Geometry: Rhombus 35° Series description: WDN10 is a Walter cutting material grade Application note: Check product matrix for workpiece suitability Inscription: VCGW110302FS-1 WDN10 SKU: VCGW110302FS-1-WDN10-WALTER FAQ Which materials is this insert best suited for? The WDN10 grade is a PCD insert optimised for abrasive non-ferrous materials; suitability for a specific workpiece should be checked against the product matrix and machining conditions. How does the PCD grade affect tool life? Polycrystalline diamond in the WDN10 grade provides significantly improved wear resistance during machining of abrasive materials, resulting in longer tool life and fewer tool changes. What machining benefits arise from the rhombic 35° geometry? The Rhombus 35° form enhances cutting stability and helps achieve consistent surface quality while enabling flexible approach angles in turning applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
VCGW110302TS-2 WBH20C Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant CBN cutting grade, precise Rhombus 35° geometry and a 0.2 mm corner radius for stable hard‑turning performance; these characteristics support productivity and repeatable surface quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for cutting data and application advice. VCGW110302TS-2 WBH20C indexable turning insert, CBN grade for hard turning | Walter Tools A Walter Tools VCGW110302TS-2 WBH20C indexable turning insert engineered for hard turning applications in hardened and pre‑hardened Stahl. CBN grade for hard turning Rhombus 35° geometry 7° relief angle for stable cutting 0.2 mm corner radius for fine finish Durable CBN grade for consistent hard‑turning results The insert uses CBN (cubic boron nitride) as cutting material, which delivers exceptionally high wear resistance when machining hardened components. Designed for ISO group H, the composition offers a reliable solution for finishing and medium‑depth turning of hardened and pre‑hardened Stahl, where conventional carbide grades would wear prematurely. With controlled chip formation and a coated CBN structure, tool life is extended and process stability is improved, reducing the need for frequent index changes and lowering overall machining downtime. Geometry that balances edge strength and surface quality The Rhombus 35° profile combined with a 7° relief angle and a 0.2 mm corner radius creates a robust cutting edge that supports precise dimension control while still enabling a smooth surface finish. A smaller corner radius helps limit cutting forces on hardened surfaces, which benefits both tool life and vibration damping in turning operations. The specified chipbreaker type supports effective chip control, maintaining consistent cutting conditions even in interrupted cuts typical of difficult hard‑turning tasks. Designed for productive, repeatable machining Belonging to the Walter CBN / hard material series, the insert is engineered to offer repeatable results across batches and operators. The geometry and grade reduce variation in surface integrity and dimensional accuracy, which is particularly important in series production of hardened components such as shafts and bearing seats. Process reliability is supported by the insert’s stable cutting behaviour, enabling more predictable tool change intervals and simplified optimisation of cutting parameters. Technical documentation and recommended cutting data are available to support integration into existing turning cycles. Contact Metav Werkzeuge for tailored cutting parameters, sample requests and to secure the VCGW110302TS-2 WBH20C insert for hard turning via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VCGW110302TS-2-WBH20C-WALTER Designation: VCGW110302TS-2 WBH20C Product type: indexable turning insert Series: Walter CBN / hard material Core Data Free angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Chipbreaker: 2 Tolerance class: G Material group: H (hardened Stahl) Special features Walter CBN / Hartstoff series CBN cutting grade for hard turning Suited for hardened and pre‑hardened Stahl Stable chip control and repeatable performance Designed for finishing and medium‑depth applications FAQ What materials is this insert designed to machine? The Walter Tools indexable turning insert in WBH20C grade is intended primarily for hardened and pre‑hardened Stahl, classified under ISO group H, where high wear resistance is required. How does the CBN grade benefit machining of hardened components? CBN delivers superior wear resistance and thermal stability; the WBH20C composition is formulated to maintain a sharp, stable cutting edge during hard‑turning, improving tool life and surface consistency. What effect does the 0.2 mm corner radius have on results? A 0.2 mm corner radius reduces peak cutting forces and supports a fine surface finish while maintaining adequate edge strength for typical finishing passes on hardened materials. Is the Rhombus 35° geometry suitable for interrupted cuts? Yes, the Rhombus 35° profile combined with the chipbreaker design provides robust edge support and controlled chip evacuation, making the insert capable in many interrupted‑cut scenarios common in hard turning. Can the insert be integrated into existing turning tools and holders? The insert follows standard indexable turning geometries and tolerance class G; holders compatible with VCGW‑type inserts will accept this grade, subject to verification against toolholder specifications. Hersteller: Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCGW110304EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Optimise hard-machining operations with the combination of a CBN cutting grade, compact rhombic geometry and a small corner radius for consistent edge life and process stability. Choose the insert via Metav Werkzeuge for direct delivery or consult the team for application tuning. VCGW110304EM-2 WBS10 indexable turning insert – Walter Tools, CBN grade The VCGW110304EM-2 WBS10 is a rhombic 35° indexable insert designed for demanding turning of hardened steels and other high-wear materials. CBN grade WBS10 for high wear resistance Rhombus 35° form for versatile turning 7° clearance angle for secure cut engagement 0.4 mm corner radius for defined edge strength Consistent productivity on hardened components The CBN-based WBS10 grade addresses the core challenge of hard turning by offering significantly improved wear resistance compared with conventional carbides. The combination of a superabrasive grade and the insert’s geometry reduces flank wear and maintains cutting-edge integrity over longer intervals, which leads to fewer tool changes and steadier cycle times. For production environments where repeatable dimensional control and tool life matter, this solution supports higher process uptime and a reduced total cost of machining per part. Geometry engineered for stable chip control and surface quality The rhombic 35° shape, coupled with a modest 0.4 mm corner radius and an integrated chipbreaker, delivers balanced performance between edge strength and surface finish. The geometry promotes predictable chip flow and helps avoid built-up edge in many hard-turning scenarios, translating into improved surface finish and more reliable tolerances. The insert thickness and profile suit standard clamping systems on toolholders for turning processes where a small, controlled nose radius is required for precision features. Secure engagement and application scope A 7° clearance angle ensures positive engagement with the workpiece and reduces rubbing at the flank, supporting thermal stability during interrupted cuts or tougher sections. As a CBN product, the insert is intended primarily for hardened steels and other high-wear alloys; suitability for cast materials or superalloys depends on the specific product matrix and must be verified for each application. The overall design focuses on process security: less edge deformation, stable cutting forces and consistent component quality in serial production. Practical guidance and specification clarity The insert is supplied in the Walter CBN / Hartstoff series and offers a precise, repeatable geometry suitable for production turning where hardness and abrasion resistance are limiting factors. Material compatibility and cutting data should be selected in line with the manufacturer’s product matrix to achieve optimal performance. For workshops and manufacturing engineers seeking predictable performance with hard-to-machine parts, this insert is a technical option that emphasises wear resistance and dimensional stability. Contact Metav Werkzeuge for tailored application advice and fast supply of Walter Tools VCGW110304EM-2 WBS10 inserts, including recommendations for clamping and cutting data Technical data Article number: VCGW110304EM-2-WBS10-WALTER Type: indexable turning insert ISO designation: VCGW110304EM-2 WBS10 Series: Walter CBN / Hartstoff Grade: WBS10 Manufacturer: Walter Tools Core figures Plate size: 11 Thickness: 03 Clearance angle: 7° Corner radius: 0.4 mm Chipbreaker: 2 Tolerance class: G Materials & features Material info: Katalogabhängig Plate form: Rhombus 35° Execution: W Sorteneinsatz: CBN for hardened steels and high-wear tasks (check product matrix) Application focus: hard turning, high abrasion resistance, stable chip formation FAQ What materials is this insert suitable for? The VCGW110304EM-2 WBS10 insert from Walter Tools is designed primarily for hardened steels and other high-wear materials; compatibility for specific alloys should be checked against the manufacturer’s product matrix. How does the CBN WBS10 grade improve process stability? The CBN WBS10 grade provides superior abrasion resistance compared with conventional carbide grades, which reduces flank wear and helps maintain consistent cutting geometry over extended runs. What is the purpose of the 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between edge strength and the ability to produce defined features, supporting improved surface finish and dimensional control in finishing and semi-finishing operations. Is the rhombic 35° form suitable for internal and external turning? The rhombic 35° geometry is versatile and commonly used for both external and certain internal turning applications where the toolholder setup permits the required engagement angle. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
VCGW110304FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the combination of PCD wear resistance, the rhombic 35° geometry and the fine 0.4 mm corner radius for stable, productive turning of abrasive non‑ferrous materials; order the insert directly via Metav Werkzeuge or ask the technical consultants for application support. VCGW110304FS-1 WDN10 turning insert – PCD grade, rhombic 35° geometry by Walter Tools The VCGW110304FS-1 WDN10 is a PCD turning insert designed for machining abrasive, non‑ferrous materials where long life and consistent surface quality are required. PCD grade for exceptional wear resistance Rhombic 35° geometry for flexible machining 7° relief angle for improved cutting engagement Durable PCD grade for fewer tool changes and predictable production The core advantage of this insert is its polycrystalline diamond (PCD) cutting material. PCD provides high wear resistance, significantly extending tool life when machining abrasive non‑ferrous workpieces. For production environments this means fewer tool changes, reduced machine downtime and a lower total cost of ownership over long runs. PCD is best suited to aluminium alloys with abrasive inclusions, non‑ferrous castings and composite materials; the material choice should be checked against the specific workpiece matrix before series production to ensure optimum performance. Geometry that enhances stability and surface finish The insert’s rhombic 35° form, combined with a 7° relief angle and a 0.4 mm corner radius, is configured to balance cutting force, tool engagement and surface quality. The shallow relief angle reduces rubbing and heat at the cutting edge, while the small corner radius enables controlled finishing cuts and predictable component geometry. The integrated chipbreaker 1 helps to fragment swarf and support continuous chip evacuation in turning operations, which improves process stability and reduces the risk of surface damage in automatic feeding conditions. Practical benefits in machining applications In daily shopfloor use the insert delivers productive machining through consistent edge life and repeatable results. The insert is particularly effective for high‑volume finishing and semi‑finishing where dimensional repeatability and excellent surface quality are priorities. The combination of PCD and the insert geometry supports high feed rates at moderate cutting speeds, leading to efficient material removal with a reliable surface finish. For tool planners, the insert’s specification aids in standardising tooling across similar non‑ferrous applications, simplifying inventory and setup procedures. Compatibility and application guidance This insert is intended for abrasive, non‑ferrous materials; check the concrete product matrix for specific alloy compatibility before selecting parameters for series production. The insert designation and series indicate the grade and intended application class—use the designation for ordering and tool management. Where uncertainty exists about feeds, speeds or coolant strategy, consultation with the technical advisors at Metav Werkzeuge ensures process parameters are matched to the component requirements and machine capabilities. For tailored advice on integrating the Walter Tools WDN10 PCD insert into machining processes and for ordering support, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a technical consultant. Technical data Article number: VCGW110304FS-1-WDN10-WALTER Designation: VCGW110304FS-1 WDN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Execution: W Tolerance class: G Material designation: Katalogabhängig Core data Size: 11 Thickness code: 03 Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 35° Chipbreaker: 1 Special features Polycrystalline diamond (PCD) cutting material Suitable for abrasive, non‑ferrous materials (check matrix) Designed for stable edge life and repeatable finishing Series: Walter Schneidstoffsorte - Serie offen Fine corner radius for precise geometry control FAQ What materials is this insert suitable for? The VCGW110304FS-1 WDN10 is a PCD insert intended primarily for abrasive, non‑ferrous materials; verify the exact alloy compatibility within the product matrix before series use. How does PCD compare to carbide for these applications? PCD (polycrystalline diamond) offers far greater wear resistance than carbide on abrasive non‑ferrous workpieces, which reduces tool change frequency and improves overall process economics for the Walter Tools WDN10 grade. What is the effect of the 0.4 mm corner radius? A 0.4 mm corner radius provides a balance between achievable surface finish and edge robustness, enabling reliable finishing passes with predictable component geometry when using the VCGW110304FS-1 insert. How does the chipbreaker influence machining? The chipbreaker 1 promotes fragmentation and controlled swarf flow, supporting continuous turning operations and helping to avoid chip accumulation that could damage the surface or impede automation. How should feeds and speeds be approached for this insert? Feeds and speeds depend on material and machine capability; start from conservative PCD parameters recommended by tool planners and adjust while monitoring tool life and surface finish—Metav Werkzeuge can assist with parameter selection for the VCGW110304FS-1 WDN10. Manufacturer: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are cited for explanation only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product from the listed manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com