VCGW110308FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the PKD cutting grade, compact rhombic geometry and precise 0.8 mm corner radius to increase process reliability and tool life in non‑ferrous and abrasive applications; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VCGW110308FS-1 WDN10 indexable turning insert – PKD, rhombic 35°, Walter Tools The VCGW110308FS-1 WDN10 is a polycrystalline diamond indexable turning insert designed for form turning and high‑wear tasks on non‑ferrous and abrasive materials. PKD grade for abrasive materials Rhombic 35° geometry for form turning 0.8 mm corner radius for accurate edge 7° clearance angle for secure cutting Maximise tool life and process reliability with PKD performance The use of PKD (polycrystalline diamond) as the cutting material provides exceptional wear resistance on abrasive, non‑ferrous workpieces, translating directly into longer tool life and fewer insert changes. In practical terms, this means fewer interruptions to machining cycles and more predictable productivity. The combination of an optimised chipbreaker and a stable cutting grade reduces edge degradation during high‑abrasion operations, supporting consistent surface quality and extended service intervals for the toolholder system. Accurate form turning and consistent geometry for demanding parts The 35° rhombic geometry and a 0.8 mm corner radius deliver repeatable form turning results, enabling precision profile work and defined radii on components where dimensional control matters. The moderate 7° clearance angle ensures effective rake and clearance interplay, reducing rubbing and heat generation at the cutting edge. These geometrical parameters help achieve high dimensional accuracy and stable machining behaviour, particularly when processing abrasive non‑ferrous alloys where conventional grades wear rapidly. Practical integration into production and selection guidance The insert belongs to Walter’s open series and is offered as catalogue‑dependent material specification; the WDN10 grade should be selected when machining abrasive, non‑ferrous materials after verification against the application matrix. For set‑ups requiring reliable edge control and long runtimes, the combination of PKD grade and the insert’s geometry supports both roughing and light finishing operations. For optimal results, match the insert geometry and grade to the workpiece material and cutting parameters; consult production data sheets or Metav Werkzeuge’s technical advisers for feed and speed recommendations tailored to the specific machining centre and clamping arrangement. Contact Metav Werkzeuge today for grade verification, application advice and to arrange fast delivery of Walter Tools inserts via Metav Werkzeuge GmbH, ensuring the right PKD solution for the machining task at hand. Technical data SKU: VCGW110308FS-1-WDN10-WALTER Designation: Indexable turning insert VCGW110308FS-1 Grade: WDN10 (PKD) Series: Walter Schneidstoffsorte - Serie offen Facts Corner radius: 0.8 mm Clearance (relief) angle: 7° Inscribed size / designation: 11 Thickness: 3 mm Tolerance class: G Insert geometry: Rhombic 35° Special features Polycrystalline diamond cutting material Chipbreaker type: 1 Material specification: catalogue dependent Application target: non‑ferrous and abrasive non‑ferrous materials (verify with product matrix) Series: Walter Schneidstoffsorte - open series FAQ Which materials is this insert designed for? The insert is specified for abrasive, non‑ferrous workpieces; the WDN10 PKD grade is optimised for such applications and should be validated against the product matrix. What advantages does PKD offer for machining? PKD (polycrystalline diamond) provides superior wear resistance and long tool life when cutting abrasive non‑ferrous materials, leading to fewer insert changes and more stable surface quality. Is the geometry suitable for finishing operations? The 35° rhombic geometry with a 0.8 mm corner radius supports precise profile control and can be used for light finishing where the grade and cutting parameters are matched. How does the chipbreaker influence performance? The integrated chipbreaker (type 1) is designed to produce controllable chips and help maintain a stable cutting edge under abrasive conditions, improving process reliability. What should be checked before selection for a specific job? Confirm the material compatibility in the product matrix and ensure the insert grade, geometry and toolholder combination match the intended feeds and speeds for the machining centre. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presence: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
VCGW160404EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the combination of durable CBN cutting material, a compact rhombic geometry and a controlled relief angle for consistent performance in high-wear turning operations; order directly via Metav Werkzeuge or consult our specialists for matrix matching and process optimisation. VCGW160404EM-2 WBS10 — indexable turning insert, CBN grade, Rhombic 35° (Walter Tools) The VCGW160404EM-2 WBS10 is an indexable turning insert engineered for precision turning of hardened materials and other high‑wear applications, offering a compact geometry for stable cutting and repeatable tool life *CBN cutting material for hard materials *Rhombic 35° geometry for versatile turning *0.4 mm corner radius for stable edge life *7° relief angle for controlled cutting Optimised grade for high‑wear machining The insert uses CBN (cubic boron nitride) as cutting material and the WBS10 grade for tasks where abrasion and flank wear are drivers of tool change. CBN is the preferred solution when conventional carbide reaches its limits: it provides superior hardness and thermal resistance, which translates into longer effective cutting periods and fewer interruptions in production. For customers seeking predictable turnaround, the combination of a wear‑resistant grade and compact geometry reduces unexpected rework and contributes to a steady machining rhythm. Suitability for specific workpiece alloys should be verified against the manufacturer's product matrix. Geometry that stabilises the cut and surface quality The Rhombic 35° outline paired with a 0.4 mm corner radius and 7° relief creates a controlled engagement between insert and workpiece. The acute rhombic angle supports fine finishing passes and allows comfortable approach angles for a wide range of turning tasks, while the small corner radius helps maintain edge strength and reduce vibration. The specified chipbreaker 2 provides reliable chip control under interrupted or continuous cuts, supporting consistent surface finish and reduced toolholder stress. These geometric choices are aimed at balancing aggressive material removal with predictable component quality. Process reliability and economical tool life By combining a CBN cutting material with a compact insert geometry, the solution emphasises process reliability and extended tool life in demanding turning applications. Consistent flank behaviour reduces the frequency of index changes and contributes to lower overall tooling consumption per component. For production environments where repeatability and uptime are priorities, the insert supports stable wear progression and helps maintain cycle time targets. Operators are advised to select cutting data according to the workpiece hardness and machine capabilities and to consult the application matrix for optimised feeds and speeds. Guidance for workshop integration The item is an indexable turning insert in VCGW form and is intended for use in toolholders that accept that geometry. The execution code is W and the item belongs to the Walter CBN / Hartstoff series; this should be matched to the holder and clamping system in use. While the insert is engineered for hard, high‑wear tasks, final suitability must be checked against the product matrix and process conditions on the shop floor to ensure optimal performance. For complex materials or unusual cutting conditions, technical data sheets and manufacturer guidance remain the primary reference. For high‑wear turning tasks choose the Walter Tools VCGW160404EM-2 WBS10; contact Metav Werkzeuge for product‑matrix checks and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCGW160404EM-2-WBS10-WALTER Designation: VCGW160404EM-2 WBS10 Series: Walter CBN / Hartstoff Grade: WBS10 Manufacturer: Walter Tools Facts Inscribed circle: 16 mm Thickness code: 04 Corner radius: 0.4 mm Relief angle: 7° Tolerance class: G Chipbreaker: 2 Special features CBN cutting material Rhombic 35° shape For hardened and high‑wear applications (check product matrix) Execution: W ISO designation: VCGW160404EM-2 WBS10 FAQ What workpiece materials is this insert intended for? The VCGW160404EM-2 WBS10 from Walter Tools is designed for high‑wear turning tasks and is primarily intended for hardened workpieces; final suitability should be confirmed against the manufacturer's product matrix. What does the WBS10 grade offer compared with other grades? WBS10 is a Walter CBN grade that emphasises wear resistance and thermal stability, making the VCGW160404EM-2 WBS10 suitable for extended cutting periods where conventional grades would wear faster. Which insert geometry and edge preparation does this item have? The insert features a Rhombic 35° geometry with a 0.4 mm corner radius and a 7° relief angle, combined with chipbreaker 2 for controlled chip formation and stable cutting. How should cutting data be selected for this insert? Cutting data depend on workpiece hardness, machine power and coolant strategy; refer to the manufacturer's recommendations and the product matrix for parameter guidance applicable to the VCGW160404EM-2 WBS10. Is the insert compatible with standard VCGW toolholders? Yes, the insert conforms to the VCGW outline and is compatible with toolholders designed for VCGW inserts, provided the holder supports the specified thickness code and clamping arrangement. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is a leading manufacturer of precision metalcutting tools and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used for explanation only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCGW160404FS-1 WDN10 Wendeplatten - Walter Tools
Benefit from exceptional wear resistance and consistent productivity with the PKD grade and Rhombic geometry; the combination of a polycrystalline diamond cutting edge, 7° clearance, and a 0.4 mm corner radius secures extended tool life and reliable surface quality — order the VCGW160404FS-1 WDN10 turning insert directly via Metav Werkzeuge or consult the technical advisors for application matching. VCGW160404FS-1 WDN10 turning insert (VCGW160404FS-1) – PKD grade, Rhombic 35°, for abrasive non‑ferrous materials (Walter Tools) VCGW160404FS-1 WDN10 is a high-wear turning insert engineered for demanding machining of non‑ferrous and abrasive non‑ferrous workpieces, combining a PKD cutting edge with a Rhombic 35° geometry for stable, repeatable performance PKD grade WDN10 for abrasive, non‑ferrous work Rhombic 35° geometry for stable cutting 7° clearance for protected cutting edge 0.4 mm corner radius for improved finish Long tool life and predictable performance for abrasive, non‑ferrous machining The WDN10 grade is a polycrystalline diamond (PKD) material designed for high abrasive resistance when machining non‑ferrous alloys and abrasive, non‑ferrous components. The diamond microstructure provides a significantly harder cutting edge than conventional carbide, which translates into reduced flank wear and longer intervals between indexings. For production environments this means fewer tool changes and more consistent part-to-part surface quality, supporting higher overall throughput while maintaining dimensional stability. Geometry optimised for surface finish and edge protection A Rhombic 35° outline combined with a 7° clearance angle establishes a balanced cutting geometry: the acute approach supports controlled shear and reduced cutting forces, while the clearance reduces rubbing behind the cutting edge. The 0.4 mm corner radius increases edge strength and helps to avoid premature chipping, improving surface finish on difficult, abrasive materials. The integrated chipbreaker promotes manageable chip forming and evacuation, which contributes directly to process reliability and predictable cycle times. Practical advantages in process planning and component quality Tolerance class G and the standard insert thickness deliver consistent fit in conventional toolholders, supporting repeatable setup and interchangeability. The open series Walter grade provides a clear material classification, but final selection should reference the product matrix to confirm compatibility with particular alloys and component geometries. By using a PKD insert in the right application, machining operations can expect lower rework rates and a stable edge condition, which supports cost-efficiency over the life of the tool and the stability of downstream processes. For application advice or stock enquiries regarding the VCGW160404FS-1 WDN10 turning insert from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and availability. Technical data SKU: VCGW160404FS-1-WDN10-WALTER Designation: VCGW160404FS-1 WDN10 Product type: Drehwendeschneidplatte / turning insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core data Insert size: 16 Thickness: 04 Clearance angle: 7° Corner radius: 0,4 Tolerance class: G Features / Applications Grade: WDN10 (PKD / polycrystalline diamond) Geometry: Rhombus 35° Chipbreaker: 1 Execution: W Material designation: Katalogabhängig Suitable for abrasive, non‑ferrous materials (check product matrix) Product family: Walter Schneidstoffsorte FAQ Which materials are best suited to this insert? The VCGW160404FS-1 WDN10 turning insert is designed primarily for non‑ferrous and abrasive non‑ferrous materials, where the PKD cutting edge delivers superior wear resistance compared with carbide alternatives. What does PKD (polycrystalline diamond) offer in practice? PKD provides a very hard cutting surface that maintains sharpness in abrasive conditions, so the VCGW160404FS-1 WDN10 shows extended tool life, stable surface finish and reduced flank wear when used in appropriate applications. How does the Rhombic 35° geometry affect machining? The Rhombic 35° shape balances cutting force and accessibility, enabling stable engagement in turning operations while supporting controlled chip formation and consistent part quality with this insert. Is the insert suitable for finishing operations? With a 0.4 mm corner radius and the PKD grade, the insert is capable of producing fine surface finishes in compatible, non‑ferrous materials while also offering edge robustness to reduce chipping risk. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new article of the manufacturer.
VCGW160404TM-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of CBN grade WBH10 for high wear resistance and the Rhombus 35° geometry for flexible turning; this ensures durable performance in hard‑turning applications and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult their specialists for process optimisation. VCGW160404TM-2 WBH10 — Indexable turning insert for hard turning (Walter Tools) VCGW160404TM-2 WBH10 is an indexable turning insert engineered for demanding hard‑machining tasks, offering a CBN grade for long tool life and precise form control. CBN grade WBH10 for hard machining Rhombic 35° geometry for flexible turning 7° clearance angle for secure cutting action 0.4 mm corner radius for precise form control Maximise productivity on hardened parts with CBN performance The WBH10 cutting grade is a CBN‑based solution designed specifically for the challenges of hardened steels and pre‑hardened components. Using a CBN matrix reduces abrasive wear and preserves the cutting edge under high contact temperatures, which translates into longer tool life and fewer insert changes. For production environments where repeatability and uptime matter, this insert delivers a measurable reduction in downtime and consistent part quality, making it a cost‑effective option for series turning and hard finishing operations. Stable edge geometry for consistent surface finish and dimensional control The insert’s Rhombus 35° shape and 0.4 mm corner radius provide a stable cutting line and good access to shoulder and profile features. The 7° clearance angle supports reliable chip flow and reduces rubbing, improving thermal control at the cutting zone. Together, these geometrical features produce a steady surface finish and maintain dimensional accuracy over long runs. The combination of geometry and CBN grade is particularly beneficial when machining components with tight tolerances, where tool wear would otherwise compromise form and finish. Application range, machine compatibility and handling benefits Marked as suitable for hardened materials (ISO group H) and pre‑hardened steels, the insert suits operations where high cutting forces and abrasive contact are present. The designation and series information identify it as part of the Walter CBN / Hartstoff line, meaning the insert is intended for demanding processes rather than general‑purpose turning. As an indexable component, it enables fast seat changes and predictable tool offsets; replacement is straightforward and supports lean toolroom routines. Process planners will value the clear specification and repeatable behaviour when integrating the insert into multi‑station turning centres or automated turning cells. Contact Metav Werkzeuge for supply and process advice on the Walter Tools CBN insert VCGW160404TM-2 WBH10 — Metav Werkzeuge’s specialists can recommend cutting data, clamping options and batch supply to suit production needs. Technical data Article number: VCGW160404TM-2-WBH10-WALTER Designation: VCGW160404TM-2 WBH10 Manufacturer: Walter Tools Product type: Indexable turning insert Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 Size designation: 16 Thickness code: 04 Tolerance class: G Special features / Materials Grade: WBH10 (CBN) Series: Walter CBN / Hartstoff Suitable for: hardened steels (H) Suitable for: pre‑hardened steel Geometry: Rhombus 35° Chipbreaker: 2 Execution code: W FAQ What materials is this insert designed to machine? The VCGW160404TM-2 WBH10 is specified for hardened steels and is suitable for pre‑hardened steel applications, exploiting the wear resistance of the WBH10 CBN grade. How does the CBN WBH10 grade affect tool life? The CBN composition of the WBH10 grade increases resistance to abrasive wear and thermal degradation, extending edge life compared with conventional cemented carbide when machining hard materials. What benefits does the Rhombus 35° geometry provide? Rhombic 35° geometry offers flexible approach angles, good access to shoulders and grooves, and stable cutting conditions that aid surface quality and reduce vibration. Is this insert compatible with automated turning centres? Yes, the indexable design and defined size designation simplify tool changes and offset management, making the insert suitable for use in automatic lathes and multi‑station turning centres. Which feature controls the part finish most directly? The combination of the 0.4 mm corner radius and the stable edge from the WBH10 grade contributes directly to consistent surface finish and dimensional fidelity during long production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCGW160404TS-2 WBH10 Wendeplatten - Walter Tools
High-performance CBN cutting performance meets stable geometry and a fine corner radius — reliable hard-turning results with long tool life. Benefit from the WBH10 grade for abrasive, hardened materials and the Rhombic 35° form for reproducible chip control. Order directly via Metav Werkzeuge or consult our application specialists for process optimisation. VCGW160404TS-2 WBH10 — Indexable turning insert, CBN grade for hardened steels | Walter Tools VCGW160404TS-2 WBH10 is an indexable turning insert designed for hard turning and finishing of hardened and pre-hardened steels in demanding production environments CBN grade WBH10 for hard turning Rhombic 35° geometry for stable cutting 7° clearance for controlled engagement Corner radius 0.4 mm for fine surface quality Consistent hard-turning performance that reduces scrap rates The combination of CBN cutting material and the WBH10 grade delivers outstanding wear resistance when machining hardened steels. CBN (cubic boron nitride) is engineered for high-temperature, high-load cutting where conventional carbides wear rapidly; this means fewer insert changes and more consistent part quality. The insert’s ability to hold a sharp, stable edge reduces variances in dimensional accuracy and surface integrity, which supports shorter process windows and predictable cycle times for series production. Geometry engineered for precise chip control and surface finish The Rhombic 35° plate form, paired with a 7° clearance, offers a balanced cutting geometry that maintains cutting forces while improving access in shoulder and profile turning. The integrated chipbreaker 2 and a corner radius of 0.4 mm support controlled chip formation and a repeatable surface finish on turned components. For operators and process engineers, these features translate into fewer rework operations and improved first-pass yield, particularly when finishing hardened components where surface integrity is critical. Robust design and series support for uninterrupted production Manufactured as part of the Walter CBN / Hartstoff series and specified to tolerance class G, this insert is intended for steady, high-demand use. The plate thickness and form factor contribute to secure clamping and vibration resistance in rigid toolholding assemblies, which extends service life and reduces unplanned downtime. Selecting a CBN WBH10 insert for hard machining tasks favours process stability and predictable tool-change intervals, supporting lean production and measurable productivity gains. For demanding hard-turning applications, specify the Walter Tools CBN insert VCGW160404TS-2 WBH10 — contact Metav Werkzeuge for tailored advice and to ensure optimal grade and geometry selection at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VCGW160404TS-2-WBH10-WALTER Label: Drehwendeschneidplatte VCGW160404TS-2 WBH10 Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Walter CBN / Hartstoff ISO designation: VCGW160404TS-2 WBH10 Data Insert size: 16 Plate thickness: 04 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: G Chipbreaker: 2 Special features CBN grade WBH10 for hard and highly abrasive machining Rhombic 35° plate form Suitable for hardened steels (H) Suitable for pre-hardened steel Designed for repeatable, stable cutting performance FAQ What materials is this insert best suited for? The VCGW160404TS-2 WBH10 insert is designed for machining hardened steels and is also suitable for pre-hardened steel applications; the WBH10 CBN grade is optimised for abrasive, high-hardness workpieces. How does CBN compare with carbide for hard turning? CBN, as used in the WBH10 grade, offers substantially higher wear resistance and thermal stability than carbide when cutting hardened materials, resulting in longer tool life and improved dimensional stability for the workpiece. Which geometry features improve surface finish? The Rhombic 35° form, 7° clearance, and corner radius 0.4 mm together contribute to controlled chip formation and reduced cutting vibration, which helps achieve a finer, more consistent surface finish. Can this insert be used for finishing and roughing operations? VCGW160404TS-2 WBH10 is primarily intended for finishing and stable hard-turning operations where edge stability and surface quality are priorities; for aggressive roughing, alternative geometries or grades should be evaluated. Is the insert compatible with standard toolholders? The insert follows common indexable insert dimensions and clamping practices for Rhombic 35° plates; compatibility should be verified against the toolholder specification and clamping seat geometry. Manufacturer: Walter Tools (Walter AG), part of the Sandvik Group; Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
VCGW160408EM-2 WBS10 WBS10 Wendeplatten - Walter Tools
Take advantage of the CBN cutting grade WBS10 and the compact Rhombus 35° geometry for precise, wear-resistant hard turning; the low clearance of 7° and a 0.8 mm corner radius combine longevity with stable cutting conditions. Order the VCGW160408EM-2 WBS10 directly via Metav Werkzeuge or ask our consultants if further process data is required. VCGW160408EM-2 WBS10 indexable turning insert, CBN grade for hard materials — Walter Tools The VCGW160408EM-2 WBS10 is a CBN indexable turning insert designed for high‑precision hard turning and abrasive applications, optimised to maintain edge stability and repeatable results in demanding production environments CBN grade WBS10 for hard materials Rhombic 35° geometry for versatile turning 0.8 mm corner radius for edge stability High-performance cutting for hardened components The CBN-based grade WBS10 delivers high wear resistance and thermal stability, which translates into longer tool life and fewer index changes in series production. As a CBN option, the insert excels where conventional carbide struggles, notably in the finishing and semi-finishing of hardened steels and other highly abrasive workpieces. The material-specific behaviour of CBN reduces flank wear and helps to secure consistent dimensional results across batches, supporting predictable cycle times and improved throughput. Precision geometry that stabilises the machining process The Rhombus 35° form and a modest clearance of 7° ensure accessible cutting engagement and favourable shear conditions for turning operations. The 0.8 mm corner radius provides a balanced compromise between edge strength and detail reproduction, improving surface quality while resisting chipping. In practice, this means stable cutting forces and better vibration damping during interrupted cuts or when working with harder microstructures — a clear advantage for repeatable, quality-critical components. Application range and process recommendations for productive use Belonging to the Walter CBN / Hartstoff series, this insert is intended for high‑hardness turning tasks and may be suitable, depending on the product matrix, for certain castings and superalloys. The series approach supports consistent chip control and reliable edge behaviour under thermal loading. For process optimisation, consult the product matrix to confirm suitability for the specific alloy and hardness range; selecting appropriate cutting parameters will exploit the insert’s wear resistance and deliver improved surface finish with minimal rework. Contact Metav Werkzeuge for tailored application support and ordering of the VCGW160408EM-2 WBS10; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VCGW160408EM-2-WBS10-WALTER Designation: VCGW160408EM-2 WBS10 Series: Walter CBN / Hartstoff Grade: WBS10 Manufacturer: Walter Tools Core technical data Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 35° Size: 16 Thickness code: 04 Chipbreaker: 2 Tolerance class: G Special features CBN cutting material for hard and highly abrasive tasks Suited for hard turning of hardened steels (check product matrix) Stable edge performance and optimised chip control Catalogue-dependent substrate/material information FAQ What materials is this insert intended for? The VCGW160408EM-2 WBS10 insert uses a CBN grade intended primarily for hardened steels and similar high‑wear applications; suitability for castings or superalloys depends on the specific product matrix. How does the 0.8 mm corner radius influence results? A 0.8 mm corner radius increases edge strength and helps to maintain surface integrity under interrupted cuts, reducing the likelihood of edge chipping during aggressive or high‑temperature turning operations. Is the Rhombus 35° form suitable for light profiling? The Rhombus 35° geometry provides versatile approach angles and is suitable for a range of external turning tasks; the insert shape supports moderate profiling while maintaining stable cutting conditions. Where can the VCGW160408EM-2 WBS10 be sourced for production trials? The VCGW160408EM-2 WBS10 is available through Metav Werkzeuge; technical data and batch availability should be checked with the supplier prior to trial runs. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
VCGW160408FS-1 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 PKD combination and the Rhombus 35° geometry for extended tool life and consistent chip control; order or request advice via Metav Werkzeuge for a smooth integration into existing turning processes. VCGW160408FS-1 WDN10 – Indexable turning insert, PKD grade, Rhombus 35°, Walter Tools A versatile VCGW160408FS-1 WDN10 indexable turning insert optimised for abrasive non‑ferrous materials and precision finishing. PKD grade WDN10 for high abrasion resistance Rhombic 35° geometry for turning versatility 0.8 mm corner radius for precise edge control 7° clearance angle for reliable chip evacuation Long service life for abrasive non‑ferrous workpieces The combination of PKD cutting material and the WDN10 grade provides outstanding wear resistance in demanding applications. Polykristalliner Diamant (PKD) is particularly suited to abrasive, non‑ferrous alloys where conventional carbide grades wear quickly; this results in a markedly extended tool life and lower tool change frequency. For production environments that process a high share of aluminium alloys, copper alloys or other abrasive non‑ferrous materials, the premium hardness of the cutting edge ensures repeatable component quality and reduced rework rates. Geometry engineered for stable cutting and surface quality The Rhombus 35° plate form combined with a 0.8 mm corner radius and 7° clearance angle gives a balanced mix of cutting stability and surface finish. The small corner radius supports precise edge control on fine turning operations while the clearance angle reduces rubbing and heat buildup, improving chip control when used with the integrated chipbreaker 1. Insert size 16 and thickness 04 (manufacturer coding) support secure clamping and consistent seat engagement, which aids process reliability and repeatable dimensional results. Process benefits and selection guidance for production Using the VCGW160408FS-1 WDN10 can reduce tool consumption and stabilise throughput when machining abrasive non‑ferrous materials; the higher upfront cost of PKD is offset by longer lifetime and fewer interruptions. Selection should be validated against the specific workpiece alloy and cutting conditions—refer to the manufacturer’s product matrix for suitability. When integrated into a standard turning cycle, the insert improves surface consistency and reduces variation between batches, supporting predictable production planning and lower overall operating cost. For abrasive non‑ferrous turning applications where long edge life and consistent finishes are essential, request the Walter Tools VCGW160408FS-1 WDN10 via Metav Werkzeuge or consult the Metav team at +49 2822 7131930 / info@metav-werkzeuge.com to confirm fitment and process parameters Technical data SKU: VCGW160408FS-1-WDN10-WALTER Designation: VCGW160408FS-1 WDN10 Product type: Indexable turning insert (Drehwendeschneidplatte) Facts Plate form: Rhombus 35° Size: 16 Thickness: 04 Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: 1 Tolerance class: G Special features Grade: WDN10 (PKD) Material: Katalogabhängig Series: Walter Schneidstoffsorte - Serie offen Execution: W FAQ What materials is this insert best suited to? The VCGW160408FS-1 WDN10 is intended for abrasive, non‑ferrous materials; the PKD cutting material provides high wear resistance when machining aluminium alloys, copper alloys and similar materials. How does the Rhombus 35° geometry affect turning performance? Rhombic 35° geometry offers a compromise between versatile cutting directions and stability; with the VCGW160408FS-1 WDN10 this results in improved surface finish and predictable chip flow during light to medium turning operations. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius on the insert gives precise edge control for finishing passes, helping to maintain dimensional accuracy and reduce the risk of form deviations on delicate external contours. Is chip control supported by this insert? Yes, the insert features chipbreaker 1 and the combination of geometry and clearance angle contributes to controlled chip formation and easier evacuation in non‑ferrous turning tasks. How should one verify suitability for a specific alloy? Suitability should be checked against the manufacturer’s product matrix and machining data; the WDN10 grade is designed for abrasive, non‑ferrous materials, but final selection depends on alloy composition and cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark holders. The offered article is an original, factory‑new product of the stated manufacturer.
VCGW160408TM-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the CBN cutting grade and the precision Rhombus 35° geometry to ensure stable chip control and long tool life in hard-turning operations; order directly via Metav Werkzeuge or consult the team for tailored application advice. VCGW160408TM-2 WBH10 turning insert — CBN grade for hard machining (Walter Tools) A VCGW160408TM-2 WBH10 insert designed for hard turning and finish machining of hardened steels, offering a Rhombic 35° shape and a CBN-based cutting grade for demanding, wear-intensive applications CBN grade for hardened turning Rhombus 35° geometry for versatility 7° clearance angle for secure cutting 0.8 mm corner radius for fine finishes Optimised performance for hard materials and process reliability The combination of a CBN cutting grade and a rhombic geometry delivers repeatable results when machining hardened steels. The WBH10 grade is formulated for high wear resistance, which reduces flank wear and maintains dimensional stability over longer tool lives. Because the insert is intended specifically for hard-turning tasks, it provides consistent surface quality and predictable tool-change intervals, improving throughput and reducing rework. Geometry and edge form that support precise finishing The Rhombus 35° profile with a 0.8 mm corner radius and a 7° clearance angle supports tight tolerances and good surface integrity on finishing passes. The modest corner radius balances strength and fine-edge contact for controlled cutting forces, while the clearance angle helps avoid rubbing on the flank. For operators seeking controlled chip formation and steady cutting conditions, this geometry is a practical choice for finishing hardened components. Practical benefits in production and tool management Using a CBN insert like this one typically reduces the frequency of insert changes in hard-turning applications, which saves set-up time and limits process interruptions. The insert’s chipbreaker and edge design promote stable chip flow under the high pressures associated with hardened material removal, which contributes to predictable cycle times and lower scrap rates. This reliability supports a more economical production flow and easier process planning. Material suitability and recommended applications The cutting grade and design are aimed primarily at hardened steels and pre-hardened components; the insert is therefore suitable for applications such as shaft finishing, bearing seat machining and hard-turned components in tool and die or mould making. When replacing conventional carbide solutions in hard machining, this CBN insert can increase productivity and enhance surface quality, especially where high abrasion resistance is required. Contact Metav Werkzeuge for application-specific recommendations on using Walter Tools CBN inserts in hard-turning applications and to discuss suitable machining parameters Technical Data Article number: VCGW160408TM-2-WBH10-WALTER Manufacturer SKU: VCGW160408TM-2 WBH10 Series: Walter CBN / Hard material Core facts Insert shape: Rhombus 35° Size: 16 Thickness: 04 Clearance angle: 7° Corner radius: 0.8 mm Chipbreaker: 2 Tolerance class: G Materials and special features Cutting grade: WBH10 (CBN) Suitable for: hardened steel (H) Series description: CBN grade for hard and wear-intensive machining Intended use: hard turning, finishing of hardened components FAQ What is the WBH10 grade suited for? The WBH10 grade is a CBN-based cutting material designed for hard and strongly wear-inducing machining tasks, particularly hardened steels. Can this insert be used for finishing operations? Yes; the Rhombus 35° geometry with a 0.8 mm corner radius is intended to support fine finishing passes and consistent surface quality. How does the CBN grade affect tool life compared with carbide? CBN typically offers significantly higher wear resistance in hardened steels, which extends effective tool life and reduces changeover frequency compared with carbide in these applications. Is the insert suitable for pre-hardened steels? The insert is suitable for pre-hardened and hardened steel machining, as indicated by the material suitability for hardened steels. Hersteller: Walter Tools: Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer (Walter Tools).
VCGW160408TS-2 WBH10 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable cutting behaviour and precise geometry for productive hard‑turning operations; order the insert directly via Metav Werkzeuge or request application advice from our consultants. VCGW160408TS-2 WBH10 indexable CBN turning insert, rhombic 35° geometry — Walter Tools The VCGW160408TS-2 WBH10 is a rhombic 35° CBN turning insert engineered for hard turning of tempered and hardened steels in demanding production environments. CBN grade WBH10 for hard turning Rhombic 35° insert geometry 7° clearance angle for stable cutting 0.8 mm corner radius for reliable finish Increased productivity through CBN wear resistance The combination of CBN cutting material and the WBH10 grade translates into markedly improved tool life when machining hardened steels. Cubic boron nitride is chemically and thermally resistant, which reduces flank wear and prolongs effective cutting time. For operations where frequent tool changes disrupt flow, the insert’s wear resistance reduces downtime and provides a predictable service interval, supporting efficient production scheduling and lower total machining costs. Stable cutting geometry for consistent surface quality The rhombic 35° form and the 0.8 mm corner radius ensure a balanced cutting edge that supports both roughing and semi‑finishing passes. A moderate corner radius helps absorb cutting forces and reduces the tendency to generate chatter, resulting in a more uniform surface finish and improved dimensional repeatability. The designation of chipbreaker 2 contributes to controlled chip formation, which simplifies chip evacuation and protects the workpiece from damage during high‑pressure cutting conditions. Robust geometry and angles for process reliability A 7° clearance angle and the insert’s specific thickness designation enable secure edge engagement and reduced rubbing on the flank face, which is beneficial when machining high‑hardness materials or pre‑hardened components. The size designation (16) and thickness code (04) match common toolholder systems for turning, facilitating integration into existing setups. When paired with appropriate cutting parameters, the insert delivers stable cutting forces and consistent tool behaviour across prolonged cycles. Practical selection and application guidance The plate is intended primarily for hardened steels and is well suited to hard turning tasks where high wear resistance and edge stability are required. For industrial use, choose compatible toolholders that accept the VCGW160408TS‑2 format and adjust feeds and speeds to account for CBN characteristics—lower cutting speeds and steady feed improve edge life. For customers seeking tailored process advice or verification of toolholder compatibility, Metav Werkzeuge can provide technical guidance and recommendations based on production requirements. For hard‑turning applications where process stability and low wear are decisive, contact Metav Werkzeuge for application support and ordering of Walter Tools CBN inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCGW160408TS-2-WBH10-WALTER Label: Drehwendeschneidplatte VCGW160408TS-2 WBH10 Walter Tools Manufacturer: Walter Tools Series: Walter CBN / Hartstoff Grade: WBH10 Product type: Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 35° Insert size: 16 Thickness designation: 04 Chipbreaker: 2 Tolerance class: G Special features CBN cutting material (WBH10) Intended for hardened and pre‑hardened steels Stable cutting edge for hard turning Controlled chip formation (chipbreaker 2) Series: Walter CBN / Hartstoff FAQ What materials is this insert designed to machine? The VCGW160408TS-2 WBH10 insert is designed primarily for hardened steels and is suitable for pre‑hardened components where CBN’s wear resistance is advantageous. How does the WBH10 grade affect tool life? The WBH10 CBN grade improves wear resistance and maintains edge stability under high cutting forces, extending the interval between indexings or replacements. Is the rhombic 35° shape suitable for finishing passes? Yes, the rhombic 35° geometry with a 0.8 mm corner radius supports semi‑finishing and finishing operations by balancing strength and surface quality. Can this insert be used in standard turning holders? The insert follows common VCGW format dimensions; compatibility depends on toolholder specification—check holder acceptance for VCGW160408TS‑2 format. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
VCGX0902ACFR WSP45G WSP45G Wendeplatten - Walter Tools
Combine the Tiger‑tec Gold coating with universal P/M/S suitability to achieve stable chip formation and extended tool life in demanding drilling and boring operations; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. VCGX0902ACFR WSP45G indexable insert for drilling/boring — Tiger‑tec Gold, Walter Tools A VCGX0902ACFR WSP45G indexable insert engineered for productive drilling and boring, optimised for machining Stahl, rostfreier Stahl and heat‑resistant alloys Tiger‑tec Gold PVD coating for wear resistance Suitable for Stahl, rostfreier Stahl and superalloys Rhombic 35° geometry for stable cutting edge Consistent tool life through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers wear resistance and reliable edge stability under the thermal and mechanical loads typical of drilling and boring. The PVD‑based coating supports a controlled temperature distribution at the cutting zone, which reduces flank wear and delays crater formation. For applications in Stahl, rostfreier Stahl and high‑temperature alloys the result is fewer index changes and longer productive cycles, which contributes to measurable process stability and reduced tooling costs. Geometry that improves chip control and surface quality The Rhombic 35° plate form with 7° clearance and tolerance class G is designed to balance cutting forces and provide a stable cutting edge during holemaking. The compact size 09 and plate thickness 02 help to maintain rigidity in the tool assembly, reducing vibration and enabling improved surface finish in the bore. In practice, the geometry promotes predictable chip control and safer evacuation of swarf, which reduces rework and supports repeatable hole tolerances in serial production. Versatility for mixed‑material workshops and predictable setup Rated for the ISO material groups P, M and S, the insert is a practical choice where flexibility is essential. The WSP45G grade is a tough, PVD‑coated cemented carbide designed to cope with the differing demands of unalloyed and alloyed Stahl, rostfreier Stahl and nickel‑based or titanium‑based superalloys. This reduces the need for multiple dedicated grades on the tool trolley and simplifies tool management. The result is a more economical inventory and faster setup changes while maintaining consistent part quality. For precision drilling with extended tool life, specify the Walter Tools VCGX0902ACFR WSP45G insert and contact Metav Werkzeuge for tailored application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VCGX0902ACFR-WSP45G-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte VCGX0902ACFR WSP45G Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Grade: WSP45G Series: Tiger‑tec Gold Manufacturer: Walter Tools Designation without grade: VCGX0902ACFR ISO designation: VCGX0902ACFR WSP45G Core Technical Data Clearance angle: 7° Plate form: Rhombus 35° Plate size: 09 Plate thickness: 02 Tolerance class: G Special features and applications Coating / technology: Tiger‑tec Gold (PVD) Material suitability: P / M / S Execution: X Typical applications: Drilling and boring operations Benefits: Stable chip formation, extended tool life, versatile material coverage FAQ What materials can this insert machine effectively? The VCGX0902ACFR WSP45G insert (Walter Tools) is suitable for ISO groups P, M and S, meaning it can machine Stahl, rostfreier Stahl and heat‑resistant superalloys and titanium‑based materials. How does the Tiger‑tec Gold technology benefit drilling operations? Tiger‑tec Gold is a PVD coating system that improves wear resistance and edge stability on the VCGX0902ACFR WSP45G, helping to maintain cutting performance and reduce frequent index changes. What does tolerance class G mean for tool setup? Tolerance class G indicates a consistent manufacturing tolerance for the insert, which supports repeatable clamping and interchangeability in standard toolholders without additional adjustments. Is this insert suitable for both drilling and milling? Although configured for drilling and boring, the WSP45G grade is versatile and can perform well in certain milling tasks where the geometry and holder permit, offering flexibility in mixed‑operation workshops. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The item offered is original, brand‑new merchandise from the manufacturer.
VCGX0902ACFR WXP40 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of consistent cutting performance, a WXP40 uncoated carbide grade and a compact rhombic form with 7° relief for reliable drilling and boring operations; order inserts directly via Metav Werkzeuge or consult the specialists for application guidance. VCGX0902ACFR WXP40 indexable insert – Rhombus 35°, 7° clearance | Walter Tools The VCGX0902ACFR WXP40 indexable insert designed for drilling and boring tasks, offering a rhombic 35° geometry and a 7° clearance angle for controlled chip formation and repeatable hole-making performance. Rhombic 35° geometry for versatile use 7° clearance angle for stable cutting action Uncoated carbide grade WXP40 for predictable wear Consistent cutting performance for demanding drilling cycles The rhombic 35° shape combined with a 7° clearance ensures a balanced contact between tool and workpiece, which leads to predictable chip formation and stable process behaviour. For operations that require repeatability, the insert’s tolerance class G and standardised size (09, thickness 02) simplify fixture and toolholder selection. This geometry supports both drilling and boring tasks where consistent entry and exit performance matters, reducing the need for frequent tool changes and rework. Broad applicability with a clear material guidance Made from an uncoated carbide grade (WXP40), the insert is suitable for a range of machining applications when matched to the correct product matrix. The grade is listed as an open series within Walter’s selection, which implies a focus on general-purpose performance across many materials; suitability for specific workpiece materials should be verified against process parameters. The insert form and relief are particularly advantageous where controlled cutting forces and accurate hole profiles are required. Operational advantages: handling, exchange and set-up The compact dimensions and standard ISO-compatible designation simplify inventory management and replacement procedures in production environments. The VCGX0902ACFR WXP40 insert fits established toolholders for indexable drilling and reaming heads, allowing fast exchange without complex set-up. Reduced set-up time and predictable wear characteristics contribute to shorter process cycles and improved productivity in batch or continuous drilling workflows. Why Walter Tools' grade matters for process security Walter Tools is known for solutions that aim to provide stable cutting edges and consistent tool life, supporting manufacturers in achieving constant results in serial production. Choosing an insert from a recognised supplier helps to maintain process security and surface quality while offering straightforward part identification through the ISO-style designation and size coding. For operations emphasizing reproducibility, these attributes support reliable cycle planning and tooling strategies. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts such as the VCGX0902ACFR WXP40 and to discuss toolholder compatibility and delivery options Technical data SKU: VCGX0902ACFR-WXP40-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Designation: VCGX0902ACFR WXP40 Brand: Walter Tools Facts Insert form: Rhombus 35° Clearance angle: 7° Size: 09 Thickness: 02 Tolerance class: G Special features Cutting grade: WXP40 (uncoated carbide, open series) Execution: X Series: Walter Schneidstoffsorte - Serie offen Application focus: drilling and boring operations Suitable for standard ISO-compatible toolholders FAQ What materials is this insert suitable for? The VCGX0902ACFR WXP40 insert is an uncoated carbide grade from Walter Tools intended for general machining tasks; specific material suitability should be checked against the product matrix and process parameters to confirm performance for particular workpiece materials. How does the 7° clearance influence hole quality? A 7° clearance angle reduces rubbing at the flank, which helps maintain consistent cutting action and contributes to stable hole geometry when using the VCGX0902ACFR WXP40 insert in drilling and boring operations. Is the insert compatible with standard toolholders? The VCGX0902ACFR designation follows ISO-style coding and is designed for compatibility with standard indexable drilling and boring toolholders that accept rhombic 35° inserts with the specified size and thickness. What performance can be expected from the WXP40 grade? WXP40 is an uncoated carbide grade offered by Walter Tools as an open series; it provides predictable wear behaviour suitable for a broad range of tasks and supports controlled chip formation in drilling processes. How is repeatability ensured across production batches? Repeatability is supported by the insert’s standardised form, the tolerance class G, and the consistent material characteristics of the WXP40 grade, enabling stable cutting results when toolholders and process parameters are correctly specified. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners and are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
VCMT110302-FM4 WMP20G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated WMP20G grade for stainless steel and precise chip control for consistent production results. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. VCMT110302-FM4 WMP20G — Turning insert (Rhombic 35°, 0.2 mm radius) by Walter Tools The VCMT110302-FM4 WMP20G is a coated carbide turning insert designed for reliable machining of stainless steel in medium to robust cutting conditions. Tiger·tec Gold coated carbide grade Dedicated for stainless steel machining Rhombic 35° geometry with 0.2 mm radius 7° clearance angle and FM4 chipbreaker Consistent performance and longer production runs The coated carbide grade WMP20G, developed under the Tiger·tec Gold technology, provides a stable cutting edge and extended tool life when machining stainless steel. The combination of coating and substrate minimises built-up edge and supports continuous production, which reduces unplanned tool changes and downtime. The rhombic 35° geometry paired with a small 0.2 mm corner radius allows for precise shoulder and profile turning, while the 7° clearance angle helps maintain a secure cutting geometry under varying feed conditions. These technical choices translate directly into fewer interruptions and more predictable throughput on the shop floor. Reliable chip control and predictable surface quality Integrated FM4 chipforming geometry ensures effective chip breakage and evacuation in demanding stainless steel operations. The chipbreaker is engineered to produce short, manageable chips across a range of feeds and depths, improving process stability and machine cleanliness. For operators and process engineers, this means a reduced risk of chip entanglement, lower rework rates and more consistent surface finishes. Explained simply, the FM4 chipbreaker shapes the metal flow at the cutting edge so that each cut removes material cleanly, which supports repeatable component tolerances and less post-process handling. Process guidance and shop-floor confidence Selection of an insert like this VCMT110302-FM4 is a pragmatic step towards process security: the WMP20G grade is specified for stainless materials where toughness and heat generation demand a robust, coated solution. For shops seeking fast implementation, the insert’s form and chip control allow straightforward index changes and minimal set-up tuning. If further machining data are required, Metav Werkzeuge provides application support and material-specific cutting recommendations to integrate the insert effectively into turning cycles. Trust in predictable performance contributes to greater operational confidence and a measurable improvement in overall equipment efficiency. Contact Metav Werkzeuge for application advice, cutting data or to secure this Walter Tools turning insert for stainless steel machining — our specialists will advise on optimal parameters and delivery options Technical data Article number: VCMT110302-FM4-WMP20G-WALTER Designation: VCMT110302-FM4 WMP20G Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Facts Corner radius: 0.2 mm Clearance angle: 7° Insert size: 11 mm Thickness: 03 Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: FM4 Geometry: Rhombic 35° Material application: stainless steel Substrate: coated carbide (Hartmetall) FAQ Is this insert suitable for stainless steel? Yes. The VCMT110302-FM4 WMP20G insert is specified for stainless steel and is formulated to manage the toughness and heat characteristics typical of these alloys. What does the FM4 chipbreaker achieve? The FM4 chipbreaker promotes short, controllable chips and reliable evacuation, which reduces the chance of chip jams and supports consistent surface quality when using the WMP20G grade. Can this insert be used for finishing passes? The WMP20G grade is optimised for medium to robust cutting conditions in stainless steel; it can be used for light finishing with appropriate feeds and speeds, but fine finishing may benefit from a dedicated finishing grade. What are the geometry benefits of the rhombic 35° shape and 0.2 mm radius? Rhombic 35° geometry gives good access and versatility for turning profiles, and the 0.2 mm radius allows accurate shoulder work and light profile radii without excess cutting forces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected product designations are used here solely for explanation and identification purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
VCMT110302-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the FM4 chipbreaker and a compact 0.2 mm corner radius, this turning insert provides reliable chip control and extended edge life for stainless steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. VCMT110302-FM4 WMP20S — turning insert (rhombic 35°, for stainless steel) by Walter Tools VCMT110302-FM4 WMP20S is a rhombic 35° turning insert engineered for machining stainless steels under medium to robust conditions Tiger·tec Silver coating for superior wear resistance FM4 chipbreaker for controlled chips in stainless steel Rhombic 35° shape with 0.2 mm corner radius Proven coating and grade for demanding stainless-steel work The Tiger·tec Silver technology and the WMP20S grade are tuned to resist the common challenges of machining stainless steel, such as high ductility and heat-induced work hardening. The coated carbide substrate promotes wear resistance and helps maintain a stable cutting edge over longer cycles, which improves process reliability in batch production. By combining a coating designed for adhesion and thermal stability with a grade optimised for tough alloys, the insert reduces unexpected edge failure and supports consistent surface quality. Geometry and chip control that improve productivity The insert’s FM4 chipbreaker works together with the rhombic 35° geometry to produce predictable chip formation and evacuation during turning. The modest 0.2 mm corner radius and 7° clearance offer a balanced compromise between edge strength and cutting precision: the small radius supports fine finishes and dimensional control, while the chipbreaker reduces built-up edge and promotes effective swarf removal. For practical terms, this means fewer interruptions to clear chips and a steadier machining cycle time. Designed for repeatable performance and lower downtime Built as part of Walter Tools’ Tiger-tec Silver series, this insert supports repeatable tool life and consistent results across runs, which contributes directly to higher machine utilisation and lower per-part costs. In production environments where secure chip control and stable edge life are decisive, the insert’s combination of coated substrate and FM4 geometry minimises the need for frequent indexings or insert changes. Technical staff benefit from predictable wear patterns and easier process windows when specifying these inserts for stainless-steel turning tasks. For stainless-steel turning applications requiring secure chip control and extended edge life, contact Metav Werkzeuge to specify the VCMT110302-FM4 WMP20S by Walter Tools or to request tailored machining advice at info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: VCMT110302-FM4-WMP20S-WALTER Article: VCMT110302-FM4 WMP20S Brand: Walter Tools Series: Tiger-tec Silver Grade: WMP20S Core data Plate size: 11 Thickness code: 03 Corner radius: 0.2 mm Clearance angle: 7° Plate form: Rhombus 35° Special features Coating: Tiger·tec Silver Substrate: coated carbide Chipbreaker: FM4 Application: stainless steel (ISO group M) Tolerance class: M FAQ What materials is this insert intended for? The VCMT110302-FM4 WMP20S by Walter Tools is designed primarily for stainless steel (ISO group M) machining, offering stable chip formation and wear resistance for such alloys. How does the FM4 chipbreaker affect machining of stainless steel? The FM4 chipbreaker on this insert promotes short, manageable chips and reduces the risk of built-up edge when turning stainless steel, improving surface finish and process stability for the VCMT110302-FM4 WMP20S. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius gives a controlled compromise between cutting-edge strength and fine surface finish, allowing the insert to deliver repeatable dimensional accuracy and good surface quality. Is this insert suitable for heavy roughing operations? The VCMT110302-FM4 WMP20S is optimised for medium to robust conditions on stainless steels; the combination of grade and geometry supports productive turning, though tool choice should match the specific depth of cut and feed for heavy roughing. Which feature contributes most to extended tool life? The Tiger·tec Silver coating together with the WMP20S grade provides the principal contribution to extended edge life by enhancing thermal stability and wear resistance under demanding cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT110302-FM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, robust coated carbide grade and a compact rhombic geometry for consistent productivity when machining stainless steels and heat‑resistant alloys. Order the turning insert directly via Metav Werkzeuge or consult the technical team for cutting‑edge recommendations. VCMT110302-FM4 WSM01 turning indexable insert — Walter Tools, Tiger‑tec Silver, for stainless steels and superalloys VCMT110302-FM4 WSM01 is a rhombic turning insert designed for demanding materials and stable chip formation in interrupted or continuous cuts Tiger‑tec Silver coating for long tool life WSM01 grade optimised for stainless steel FM4 chipbreaker for stable chip control Rhombic 35° shape with 0.2 mm radius Greater process reliability through controlled chip formation The combination of the FM4 chipbreaker and the rhombic geometry delivers predictable chip control when working with tough materials. For materials classified under ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), the chipformer reduces the risk of built‑up edge and improves evacuation, which in turn lowers the likelihood of rework and unscheduled downtime. This benefit is especially relevant for shops seeking consistent surface finish with fewer operator interventions. Longer edge life from a modern coated carbide grade The WSM01 grade on the Tiger‑tec Silver platform offers a balanced, coated‑carbide solution tuned for heat resistance and edge stability. The coated construction supports a stable cutting edge even under the thermal stress typical of stainless steels, so the insert sustains cutting performance for longer tool cycles. Reduced flank wear and longer intervals between indexings translate into measurable gains in throughput and lower cost per component. Geometry that supports accuracy and repeatability The insert’s rhombic 35° outline and 0.2 mm corner radius provide a compromise between sharp cutting action and edge robustness. A 7° clearance angle helps preserve part geometry while minimising rubbing at the flank. These geometrical choices contribute to repeatable dimensions in serial production and make insert positioning and seat contact more forgiving across different toolholder types and clamping systems. Practical benefits for workshop productivity As a standard VCMT‑format insert, the component fits common toolholders and simplifies inventory management. The combination of FM4 chip control and the coated grade reduces tool change frequency and improves first‑pass yield, making the insert an efficient choice for medium‑ to high‑mix machining of stainless steels and superalloys. Walter Tools’ engineering background supports applications where process security and surface quality are priorities. For tailored cutting data or application advice for this Walter Tools turning insert, contact Metav Werkzeuge for recommendations and sample strategies at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical consultancy and material‑specific parameters are available upon request Technical data Article number: VCMT110302-FM4-WSM01-WALTER Designation: VCMT110302-FM4 WSM01 Product type: Turning indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Facts Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 35° Size code: 11 Thickness code: 03 Chipbreaker: FM4 Grade: WSM01 Tolerance class: M Special features Coating: Tiger‑tec Silver Material base: Coated carbide Suitable for: stainless steels (M) Suitable for: superalloys and titanium (S) Application focus: heavy‑duty and heat‑generating machining Format: VCMT turning insert, indexable FAQ Which materials is this insert intended for? The VCMT110302-FM4 WSM01 insert is designed primarily for stainless steels (ISO group M) and is also suitable for heat‑resistant superalloys and titanium (ISO group S), where the WSM01 grade supports stable cutting edges. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WSM01 grade combines thermal resistance and wear protection to extend edge life and preserve surface quality during prolonged cuts with the VCMT110302-FM4 insert. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes controlled chip formation and evacuation, reducing built‑up edge risks and improving process stability when machining difficult materials with this insert. Is the insert compatible with standard toolholders? Yes, the insert follows the VCMT indexable insert format and is compatible with common VCMT toolholders and clamping systems, simplifying tool management and replacement. Can this insert be used for interrupted cuts? The combination of a robust corner radius and the coated grade makes the insert suitable for interrupted and continuous operations, offering a balance between edge strength and cutting performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; support@walter-tools.com Protected trademarks and product names are the property of their respective owners and are used here for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
VCMT110302-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, stable chip control and a compact rhombic geometry for reliable turning of rostfreier Stahl and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. VCMT110302-FM4 WSM10S turning insert — Tiger·tec Silver, FM4 chipbreaker (Walter Tools) VCMT110302-FM4 WSM10S is a coated indexable turning insert for demanding turning applications in difficult‑to‑machine materials and rostfreie Stähle Tiger·tec Silver coating for long tool life Robust FM4 chipbreaker for stable chip control Rhombic 35° form for versatile turning 0.2 mm corner radius for fine finishing Precision and productivity for demanding turning tasks The coated indexable insert combines a modern coating technology with a geometry optimised for controlled cutting in demanding materials. The Tiger·tec Silver series and the WSM10S grade deliver enhanced wear resistance and thermal stability, which supports a stable cutting edge under high thermal loads. The FM4 chipbreaker is designed to produce short, manageable chips in interrupted cuts and continuous turning alike, reducing downtime for chip handling and improving process reliability when machining rostfreie Stähle and superalloys. Geometry and cutting behaviour that support surface finish A rhombic 35° form with a 0.2 mm corner radius provides a balance between accessibility in tight features and the ability to achieve a fine surface finish. The insert’s small corner radius reduces cutting forces and helps to avoid chatter in light finishing passes, while the relief angle of 7° maintains strength at the cutting edge. For application engineers and workshop planners, this means predictable results in finishing and semi‑finishing operations, fewer part rejects and improved repeatability across serial production runs. Material scope and application advantages The WSM10S grade is intended for the machining of workpiece groups M and S — specifically rostfreie Stähle and heat‑resistant superalloys or titanium — materials that tend to generate heat and strain the cutting edge. The coated carbide substrate, part of the Tiger·tec Silver system, supports secure chip formation and good edge stability, enabling productive material removal rates while maintaining tool life. For manufacturers processing components in aerospace, medical or energy sectors, the insert offers a pragmatic compromise between aggressive cutting capability and surface integrity, assisting process engineers to meet tight tolerances without excessive tool changes. For technical selection and immediate availability of the Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge to discuss the best grade and geometry for the intended application or to place an order Technical data Article number: VCMT110302-FM4-WSM10S-WALTER Product type: Drehwendeschneidplatte (turning insert) Series: Tiger·tec Silver Grade: WSM10S Core dimensions Insert form: Rhombus 35° Corner radius: 0.2 mm Relief angle: 7° Size: 11 Thickness: 03 Special features Chipbreaker: FM4 Coating/technology: Tiger·tec Silver Material suitability: S / M Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The VCMT110302-FM4 WSM10S insert is suitable for machining rostfreie Stähle and heat‑resistant superalloys/titanium, reflecting its designation for ISO groups M and S. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker promotes stable chip control and short chip formation, improving operational safety and reducing time spent on chip management when using the Walter Tools insert. Which series and coating are applied to this grade? This insert belongs to the Tiger·tec Silver series; the WSM10S grade is a coated carbide designed for improved wear resistance and edge stability. What cutting tasks benefit most from the 0.2 mm corner radius? A 0.2 mm corner radius suits fine finishing and light semi‑finishing passes where improved surface integrity and reduced cutting forces are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, brand‑new merchandise from the manufacturer (Walter Tools).
VCMT110302-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting performance and consistent chip control for reliable productivity in stainless and heat-resistant alloy machining; order directly via Metav Werkzeuge or contact the consultants for tailored application advice. VCMT110302-FM4 WSM20S turning insert — Tiger‑tec Silver grade for stainless and superalloys (Walter Tools) VCMT110302-FM4 WSM20S is a precision turning insert designed for productive machining of stainless steels and heat‑resistant superalloys in demanding industrial environments Tiger‑tec Silver coating for enhanced wear resistance FM4 chipbreaker for consistent chip control 7° clearance angle for stable cutting geometry Rhombic 35° form for versatile turning operations Higher productivity through advanced coating and chip control The coated grade delivers predictable tool life and repeatable performance under heavy loading. The Tiger‑tec Silver coating stabilises the cutting edge, reducing flank wear and extending service intervals; this results in fewer tool changes and improved uptime on the shop floor. Combined with the FM4 chipbreaker, the insert promotes reliable chip control, lowering the risk of built‑up edge and enabling continuous machining in production batches. The resulting efficiency improvements support measurable cost‑benefit gains for series work. Secure geometry for consistent surface quality and tool life The insert’s rhombic 35° geometry and 7° clearance angle create a secure cutting line that balances strength with accessibility for varied turning profiles. The small 0.2 mm corner radius provides a focused cutting edge for fine finishes while maintaining edge stability in interrupted cuts. These geometric choices translate into consistent surface quality and reduced rework, particularly beneficial where tight tolerances and reproducible results are required in serial manufacture. Optimised for stainless steels and high‑temperature alloys Specifically developed for machining groups M and S, the WSM20S grade supports challenging materials such as stainless steels and heat‑resistant superalloys. The microstructure and coating combination help dissipate heat and resist edge deformation during machining, which is crucial when cutting materials that tend to work‑harden or generate high thermal loads. For workshops processing corrosive‑resistant components or high‑temperature alloys, this insert provides a reliable balance of wear resistance and edge security. Industrial reliability and process consistency The insert conforms to industrial tolerances and material specifications that support repeatable set‑ups and predictable tool life. The tolerance class M and standard VCMT format facilitate straightforward integration into established toolholder systems, reducing setup time and simplifying inventory management. Backed by the Walter Tools product family, this insert is suited to production lines aiming for stable, long‑term performance with reduced process variation. Discuss application specifics or request a supply proposal for Walter Tools VCMT110302-FM4 WSM20S directly with Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VCMT110302-FM4-WSM20S-WALTER Designation: VCMT110302-FM4 WSM20S Manufacturer: Walter Tools Product type: Turning insert Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 11 Thickness code: 03 Shape: Rhombic 35° Tolerance class: M Applicable material groups: M (stainless steels), S (superalloys/titanium) Special features Coating: Tiger‑tec Silver Chipbreaker: FM4 Grade: WSM20S Series: Tiger‑tec Silver Typical use: Heavy‑duty and difficult‑to‑cut materials FAQ Which materials are best suited for this insert? The VCMT110302-FM4 WSM20S is engineered primarily for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where heat and edge wear demand a coated, stable grade. What does the FM4 chipbreaker do? FM4 is a chip control geometry that channels swarf reliably, reducing the chance of entanglement and improving surface finish when using the VCMT110302-FM4 WSM20S in continuous or semi‑continuous turning. How does the Tiger‑tec Silver coating benefit the operation? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, extending tool life and enabling longer production runs with consistent cutting performance from Walter Tools inserts. Is the insert compatible with standard VCMT toolholders? The designation VCMT indicates a standard insert format; compatibility requires a toolholder designed for VCMT inserts and the appropriate clamping geometry to accommodate the insert’s rhombic 35° form. What does the tolerance class M imply for process setup? Tolerance class M denotes manufacturing precision that supports reproducible seating and repeatable results, aiding quick set‑up and consistent part quality in industrial machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer. Walter Tools (Walter AG) is a recognised provider of precision cutting tools and forms part of the wider Sandvik Group.
VCMT110302-FM4 WSM30S WSM30S Wendeplatten - Walter Tools
Combining Tiger‑tec Silver coating and the FM4 chipbreaker with a compact 0.2 mm corner radius yields dependable edge stability and predictable chip formation for demanding materials; order the insert via Metav Werkzeuge or consult our specialists for process optimisation. VCMT110302-FM4 WSM30S indexable turning insert – 7° clearance, Rhombic 35°, Walter Tools VCMT110302-FM4 WSM30S is a rhombic‑35° indexable turning insert designed for heavy and heat‑resistant materials, providing a balance of edge strength and controlled chip flow for industrial turning applications Tiger‑tec Silver coating for tough materials Grade WSM30S for stainless steels and superalloys FM4 chipbreaker for secure chip control Rhombic 35° VCMT form with 0.2 mm radius Stable cutting performance where heat and toughness matter The Tiger‑tec Silver coating combined with a coated‑carbide substrate gives a measurable improvement in thermal resistance and wear behaviour. This grade, WSM30S, is formulated to maintain a stable cutting edge under the high temperatures and adhesive tendencies typical of stainless steels and superalloys. The result is extended tool life and fewer interruptions for insert changes, which supports continuous, predictable production cycles and reduces overall machining cost per component. Precise geometry for consistent chip control and surface quality A Rhombus 35° geometry with 7° clearance and a 0.2 mm corner radius provides an advantageous contact angle for turning operations that demand good surface finish and dimensional repeatability. The FM4 chipbreaker is configured to form short, manageable chips in tough materials, improving swarf handling and protecting the workpiece from built‑up edge. This combination helps achieve consistent part quality without sacrificing cutting efficiency. Suited to demanding workpiece materials and robust process windows The specification supports machining in the ISO groups M and S — explicitly stainless steels and heat‑resistant superalloys/titanium. The grade behaviour favours secure chip formation and edge strength where conventional grades wear prematurely. For shops tackling mixed batches of stainless components or high‑temp alloys, this insert widens the stable cutting envelope and reduces the need for frequent grade changes. Practical benefits for production and tool management Using the VCMT110302-FM4 geometry in the Tiger‑tec Silver series simplifies inventory strategy: a single insert family covers a broader range of applications, lowering variant counts while delivering reliable performance. The compact 0.2 mm corner radius helps when close tolerances and controlled cutting forces are required, and the defined tolerance class M supports interchangeability in toolholders and automated tool‑change systems, improving uptime and process reproducibility. For application advice or to ensure the VCMT110302‑FM4 WSM30S best suits a given component, contact Metav Werkzeuge for tailored recommendations and to secure genuine Walter Tools inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VCMT110302-FM4-WSM30S-WALTER Product: Indexable turning insert (drehwendeschneidplatte) Designation: VCMT110302-FM4 WSM30S Brand: Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Insert form: Rhombic 35° Size: 11 Thickness: 03 Tolerance class: M Designs / Special features Series: Tiger‑tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Execution: T Material suitability: stainless steels (M), heat‑resistant superalloys & titanium (S) Application focus: heavy-duty and difficult‑to‑machine materials FAQ What materials is this insert optimised for? The VCMT110302‑FM4 WSM30S is optimised for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), where heat resistance and edge stability are critical. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker is engineered for secure chip control in tough materials, producing short, manageable chips that reduce swarf interference and support consistent surface finish. What does the Tiger‑tec Silver series contribute? The Tiger‑tec Silver coating enhances thermal resistance and wear performance, extending service life under elevated cutting temperatures and adhesive wear conditions. Is the 0.2 mm corner radius suitable for precision turning? Yes, the 0.2 mm corner radius balances edge strength with the ability to maintain tight tolerances and controlled cutting forces in precision turning tasks. Can this insert be used in automatic tool‑changing systems? The defined geometry and tolerance class M support interchangeability across compatible toolholders, aiding integration into automated machining setups. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT110302-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the WEP10C cermet grade, the FP4 chipbreaker and the fine 0.2 mm corner radius to achieve consistent finishing quality and stable chip control; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. VCMT110302-FP4 WEP10C – indexable turning insert, FP4 chipbreaker, Walter Tools The VCMT110302-FP4 WEP10C is an indexable turning insert from Walter Tools designed for precision finishing and controlled chip formation in demanding turning processes Cermet grade WEP10C for finishing FP4 chipbreaker for fine chip control Rhombic 35° geometry for versatile use 0.2 mm corner radius for refined surfaces High-precision finishing with cermet technology The Walter Cermet grade WEP10C is engineered to deliver improved surface quality in finishing operations. Cermet combines ceramic and metallic binder phases to provide a wear-resistant cutting edge that maintains form during light to medium finishing passes. The modest corner radius (0.2 mm) reduces cutting forces and helps achieve a consistent surface finish while limiting vibration. In practice, this means fewer reworks and better dimensional stability on turned components where fine tolerances are required. Stable chip control and consistent geometry The integrated FP4 chipbreaker is designed to fragment chips reliably during finishing cuts, reducing the risk of long, stringy swarf and improving process security. The insert’s rhombic 35° shape offers good approach angles for a range of turning strategies, enabling close control of cutting engagement and flank contact. The listed relief angle (7°) contributes to predictable cutting behaviour and efficient edge engagement. These features combine to support repeatable results and enhance productivity in serial production. Selection advice and application limits This insert belongs to the Walter Cermet series and is supplied in the designation VCMT110302-FP4 WEP10C; suitability for specific materials should be verified against the product matrix. The grade is catalogue-dependent regarding substrate and coating details—check the detailed matrix when matching the insert to particular steels or non-ferrous materials. The tolerance class M and the nominal size 11 indicate its dimensional expectations for standard toolholders. For bespoke recommendations, it is advisable to consult Metav Werkzeuge with information on workpiece material and machining parameters. Contact Metav Werkzeuge to discuss how the Walter Tools VCMT110302-FP4 WEP10C indexable turning insert can optimise finishing operations; email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: VCMT110302-FP4-WEP10C-WALTER Designation: VCMT110302-FP4 WEP10C Product type: Drehwendeschneidplatte Series: Walter Cermet Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0,2 mm Shape: Rhombus 35° Size: 11 Thickness: 03 Tolerance class: M Chipbreaker: FP4 Special features Cermet grade: WEP10C Series description: Walter Cermet Material details: Katalogabhängig Base designation: VCMT110302-FP4 Execution: T FAQ What does the FP4 chipbreaker do for machining? The VCMT110302-FP4 WEP10C indexable turning insert from Walter Tools uses the FP4 chipbreaker to break chips into manageable segments, improving swarf control and reducing the chance of chip-related interruptions during finishing passes. Is the WEP10C grade suitable for all materials? The WEP10C cermet grade in the VCMT110302-FP4 WEP10C is optimised for finishing applications, but material suitability must be checked against the product matrix; Walter Tools provides grade guidance and Metav Werkzeuge can assist with the matching process. How does the 0.2 mm corner radius affect surface finish? The 0.2 mm corner radius of the VCMT110302-FP4 WEP10C reduces cutting shocks and helps produce a finer surface texture, making the insert well suited to operations that prioritise surface quality and dimensional accuracy. Can this insert be used in standard tooling systems? The VCMT110302-FP4 WEP10C follows common indexable insert conventions (designation VCMT110302) and fits compatible toolholders specified for rhombic 35° inserts; verify holder compatibility and clamp type before mounting. What information is needed to select the right grade and geometry? When evaluating the VCMT110302-FP4 WEP10C, provide workpiece material, cutting speed, feed and depth of cut; Metav Werkzeuge can advise on parameter ranges and confirm whether the Walter Cermet grade suits the application. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
VCMT110302-FP4 WKP01G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP01G carbide grade and the FP4 chipbreaker for predictable tool life and efficient chip control; order the inserts directly via Metav Werkzeuge or consult our advisors for cutting data and availability. VCMT110302-FP4 WKP01G indexable turning insert — FP4 chipbreaker, Tiger·tec Gold coating (Walter Tools) The VCMT110302-FP4 WKP01G is an indexable turning insert designed for general turning of steel and cast iron, combining a robust geometry with a high-performance coating for industrial metalcutting applications Tiger·tec Gold coating for extended tool life WKP01G grade optimised for steel and cast iron FP4 chipbreaker for consistent chip control Rhombic 35° form with 0.2 mm nose radius Higher productivity through a tailored coating and grade The combination of the Tiger·tec Gold coating and the WKP01G carbide grade delivers a balance between wear resistance and fracture toughness that is particularly effective when machining ISO group P (steel) and K (cast iron). The insert is a coated carbide solution developed to withstand the thermal and mechanical demands of steel turning while maintaining stable cutting-edge performance in abrasive cast iron applications. This means longer intervals between indexings, fewer unplanned tool changes and a more predictable production rhythm — a clear efficiency gain on batch and continuous production lines. Consistent chip control and reliable geometry reduce downtime The FP4 chipbreaker geometry is engineered for dependable swarf formation and evacuation in a wide range of turning routines. Paired with the Rhombic 35° wedge and a small 0.2 mm nose radius, the insert achieves a good balance of surface finish and strength at the cutting edge. The 7° clearance angle supports smooth entry and exit at the cut while the standard tolerance M ensures interchangeability across toolholders. These features together reduce rework, lower the risk of built-up edge and simplify process set-up when working with varying feed and speed parameters. Process security, practical handling and application fit With an 11 mm nominal size and a plate thickness of 03, the design suits common turning applications where a compact insert and defined edge form are required. The Tiger·tec Gold series is known for consistent tool life and reproducible results in demanding production environments, which supports high process security and lowers total machining cost per part. The insert’s specification suits shops aiming for repeatable surface quality and stable cycle times when machining both unalloyed and alloyed steels as well as grey and nodular cast irons. For application guidance, cutting parameters and holder recommendations, technical consultation is available to match the insert to specific machines and workpiece materials. For consistent machining results with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised cutting data, availability and order support — Metav Werkzeuge is ready to advise on process settings and delivery options Technical data Article number / SKU: VCMT110302-FP4-WKP01G-WALTER Product label: Drehwendeschneidplatte VCMT110302-FP4 WKP01G Walter Tools Product type: indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Core technical data Size: 11 Thickness: 03 Clearance angle: 7° Corner radius: 0.2 mm Tolerance class: M Special features and suitability Coating / Series: Tiger·tec Gold Carbide grade: WKP01G (coated carbide) Chipbreaker: FP4 Insert form: Rhombic 35° Material suitability: Steel (P), Cast iron (K) Execution: T (top-side orientation) FAQ What materials is this insert suitable for? The VCMT110302-FP4 WKP01G insert is designed primarily for steel (ISO P) and cast iron (ISO K) applications, reflecting the material suitability of the WKP01G grade and the Tiger·tec Gold coating. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker provides controlled chip formation and evacuation, which improves process stability and reduces the likelihood of built-up edge during turning operations with varying feeds. What surface quality can be expected with this geometry? Thanks to the 0.2 mm nose radius and Rhombic 35° form, the insert offers a good compromise between edge strength and surface finish, giving reliable part quality in general turning tasks. Is the insert interchangeable across toolholders? The insert is manufactured to a standard tolerance M, which supports interchangeability between compatible toolholders designed for VCMT-style inserts. Which benefits does the Tiger·tec Gold series provide for production? Tiger·tec Gold delivers enhanced wear resistance and consistent cutting-edge behaviour, which contributes to longer tool life, stable machining and reduced total cost per component when using Walter Tools inserts. Manufacturer: Walter AG; Tübingen; Germany. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. The offered item is an original, factory-new product of the manufacturer.
VCMT110302-FP4 WPP10G T Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the wear-resistant WPP10G grade together with the precise FP4 chipbreaker and 7° clearance for reliable, productive turning of steel; order genuine Walter Tools inserts via Metav Werkzeuge or consult our technical team for application-specific recommendations VCMT110302-FP4 VCMT110302-FP4 WPP10G Turning Insert for Steel — Walter Tools VCMT110302-FP4 WPP10G is an indexable turning insert designed for steel machining applications, combining a rhombic 35° geometry with a 0.2 mm corner radius and Tiger·tec Gold coating for extended tool life Tiger·tec Gold coating for long tool life WPP10G grade optimised for steel machining FP4 chipbreaker for controlled chip formation Rhombic 35° geometry for versatile turning Higher throughput with consistent edge life The combination of the Tiger·tec Gold coating and the WPP10G material grade delivers a balanced performance between wear resistance and toughness. This balance reduces flank wear under typical turning conditions and extends tool life, which in turn improves process reliability and lowers tooling costs per component. The coated carbide substrate resists abrasive wear and thermal stress, making the insert particularly suitable where stable cutting edges are required for serial production. The result is fewer tool changes and less unplanned downtime. Predictable chip control and surface finish Equipped with the FP4 chipbreaker, the insert produces short, manageable chips when cutting steels classified under ISO P, which simplifies chip evacuation and reduces the risk of surface damage. The rhombic 35° approach angle supports a good mix of strength and accessibility for external and light profiling operations. Because the geometry and chipbreaker are matched to steel cutting, users can expect consistent surface quality and dimensional stability even at higher cutting speeds. Precision geometry for repeatable performance The insert features a 0.2 mm corner radius and a 7° clearance angle, dimensions that are optimised for finishing and near-finishing applications where tight tolerances and good surface quality are required. The size designation (11 mm inscribed circle) and a plate thickness of 3 mm provide a rigid tool tip with reduced vibration potential. The tolerance class M ensures predictable fit and seating in compatible toolholders, supporting repeatable results across multiple insert changes. Contact Metav Werkzeuge for tailored cutting data, genuine Walter Tools inserts and expert application support to optimise productivity for steel turning tasks Technical data Article number: VCMT110302-FP4-WPP10G-WALTER Designation: VCMT110302-FP4 WPP10G Product type: Turning insert (indexable) Series: Tiger·tec Gold Grade: WPP10G Core dimensions Inscribed circle: 11 mm Thickness: 3 mm Corner radius: 0.2 mm Clearance angle: 7° Geometry: Rhombic 35° Tolerance class: M Material & special features Coating: Tiger·tec Gold Substrate: Coated carbide Chipbreaker: FP4 Application group: Steel (ISO P) Execution: T Series description: Wear-resistant, universal/tough mix for steel machining FAQ What materials is this insert suitable for? The VCMT110302-FP4 WPP10G insert is designed primarily for machining steels (ISO P); the WPP10G grade and Tiger·tec Gold coating optimise wear resistance and chip control for these materials. Which chipbreaker should be used for stable turning results? This insert uses the FP4 chipbreaker, which provides reliable chip formation and evacuation when turning steel, helping to maintain surface quality and reduce the risk of built-up edge. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold enhances thermal and abrasive wear resistance on the insert, resulting in longer edge life and fewer tool changes during serial machining with Walter Tools turning inserts. Is the insert suitable for finishing operations? Yes; the 0.2 mm corner radius and 7° clearance offer a balance between edge strength and fine surface finish, making the insert suitable for finishing and near-finishing steel turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
VCMT110302-FP4 WPP20G FP4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the FP4 chipbreaker for reliable chip control and extended tool life; the rhombic 35° geometry and 0.2 mm corner radius ensure consistent results in steel turning. Order the insert directly via Metav Werkzeuge or consult the technical team for cutting-data recommendations. VCMT110302-FP4 WPP20G turning insert (Rhombic 35°, FP4) by Walter Tools The VCMT110302-FP4 WPP20G is a rhombic 35° turning insert optimised for steel machining, featuring the Tiger·tec Gold coating and an FP4 chipbreaker for stable, productive metalcutting. Tiger·tec Gold coating for high wear resistance FP4 chipbreaker for reliable chip control Rhombic 35° geometry for universal turning Optimised for machining of steel materials Proven wear resistance for longer production runs The combination of the Tiger·tec Gold coating and the WPP20G grade delivers high wear resistance, which translates into longer cutting intervals and fewer insert changes. The coated cemented-carbide substrate is engineered to handle the heat and strains typical of machining steels (ISO group P). As a result, process reliability improves and tool-change downtime is reduced, supporting uninterrupted productivity in batch and series production. Stable chip control and repeatable surface quality The FP4 chipbreaker is designed for effective chip control when turning a wide range of steels. Together with the rhombic 35° geometry and the corner radius 0.2 mm, the insert produces consistent chip formation and helps maintain a steady cutting force. This reduces vibration and contributes to a uniform surface finish, making the grade suitable where repeatable part quality and dimensional stability are required. Easy integration into existing turning processes The insert’s dimensions and tolerance class M make it compatible with standard toolholders and clamping systems for VCMT-style inserts. Its profile supports both roughing and finishing strategies when cutting data are adapted to material and machine rigidity. Because the grade is specified for steel, users benefit from predictable thermal behaviour and manageable wear patterns; this simplifies the selection of feeds and speeds and reduces trial-and-error set-up time on the shop floor. Practical advantages for machining planners From a process-planning perspective, the insert reduces the need for frequent tool inventory variants: the universal 35° geometry and FP4 chip control allow one grade to cover a broad spectrum of steel applications. The technology also supports higher metal-removal rates under suitable machine conditions, contributing to improved throughput and a better cost-in-use ratio. For engineers seeking stable performance, the blend of coating technology and chipbreaker design represents a pragmatic choice. Contact Metav Werkzeuge for cutting-data support and availability of the Tiger·tec Gold VCMT110302-FP4 WPP20G turning insert – info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: VCMT110302-FP4-WPP20G-WALTER Designation: VCMT110302-FP4 WPP20G Manufacturer: Walter Tools Product type: Turning insert (indexable) Core technical data Relief angle: 7° Corner radius: 0.2 mm Insert size: 11 mm Thickness: 3 mm Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G (coated cemented carbide) Chipbreaker: FP4 Geometry: Rhombic 35° Material application: Steel (ISO group P) FAQ What materials is this insert suited for? The VCMT110302-FP4 WPP20G turning insert from Walter Tools is specified for machining steels (ISO group P) and is optimised for the thermal and chip-formation behaviour typical of these materials. Which coating and grade are used on the insert? This insert uses the Tiger·tec Gold coating and the WPP20G grade, a coated cemented-carbide formulation designed for wear resistance and broad applicability in steel turning. What chip control can be expected with the FP4 breaker? The FP4 chipbreaker provides controlled chip segmentation and evacuation across a range of feeds, helping to maintain stable cutting forces and consistent surface finishes during turning operations. What are the critical dimensional data to check before installation? Key values to verify are the relief angle 7°, corner radius 0.2 mm, insert size 11 mm, and thickness 3 mm to ensure compatibility with the chosen toolholder and the intended machining strategy. How does the insert support productivity in a production environment? By combining robust coating technology with an effective chipbreaker and universal 35° geometry, the insert reduces downtime for tool changes and supports higher metal removal rates when paired with appropriate cutting data and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only; there is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise of Walter Tools.
VCMT110304-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold coated carbide grade and the FM4 chipbreaker ensures consistent chip control and stable edge life in demanding stainless applications; this results in efficient turning with fewer interruptions. Secure supply and consultancy available via Metav Werkzeuge for production-ready tooling. VCMT110304-FM4 WMP20G turning insert — Rhombic 35°, 0.4 mm corner radius, Walter Tools The VCMT110304-FM4 WMP20G is a rhombic 35° turning insert in the Tiger‑tec Gold family, engineered for robust performance when machining rostfreier Stahl under medium to heavy conditions. Tiger‑tec Gold coated carbide grade WMP20G Rhombic 35° geometry for versatile turning 0.4 mm corner radius for stable edge performance Suitable for rostfreier Stahl machining (ISO M) Precise performance for rostfreier Stahl with predictable tool life The VCMT110304-FM4 WMP20G insert combines a Tiger‑tec Gold coating with a WMP20G substrate to address the typical challenges of rostfreier Stahl: tendency to work‑harden, sticky built‑up edge and elevated cutting temperatures. The rhombic 35° geometry delivers an adaptable entering angle that balances cutting forces and surface finish, while the FM4 chipbreaker supports controlled chip formation. This engineered combination reduces the frequency of tool changes and contributes to a more predictable machining cycle, which is valuable for batch and continuous production environments. Reliable chip control and edge stability for improved process efficiency The FM4 chipbreaker is designed to promote short, manageable chips when turning ductile and gummy alloys, enhancing swarf evacuation and operator safety. The 0.4 mm corner radius provides a compromise between edge strength and finish capability: it increases resistance to chipping under interrupted cuts and tough feeds while still allowing acceptable surface quality. Together, these features help to lower downtime and improve overall tool utilisation — a direct benefit for production planners seeking consistent throughput. Application guidance and integration into the workshop This indexable insert is sized and profiled for standard toolholders compatible with VCMT geometry; the plate size and thickness make it suitable for conventional turning operations where stability is required. The grade is specified for ISO M materials, meaning rostfreier Stahl is the primary target; under these conditions the coated hardmetal and the optimised chip control contribute to lower scrap rates and more repeatable part quality. For integration into new setups, consider toolholder rigidity and coolant strategy to exploit the coating and chipbreaker benefits fully. Contact Metav Werkzeuge for tailored application advice and reliable supply of Walter Tools inserts — Metav Werkzeuge's consultants can recommend the optimal grade and holder combination for the machining task at hand. Technical data Article number: VCMT110304-FM4-WMP20G-WALTER SKU: VCMT110304-FM4-WMP20G-WALTER Product type: Drehwendeschneidplatte Designation: VCMT110304-FM4 WMP20G Brand: Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 Plate form: Rhombus 35° Plate size: 11 Plate thickness: 03 Tolerance class: M Designs / Special features Series: Tiger‑tec Gold Grade: WMP20G Chipbreaker: FM4 Material group suitability: rostfreier Stahl (ISO M) Execution: T FAQ What material is this insert intended for? The VCMT110304-FM4 WMP20G insert is specified for rostfreier Stahl (ISO M) and is optimised for the typical demands of those alloys. How does the FM4 chipbreaker benefit everyday turning operations? The FM4 chipbreaker promotes consistent, controllable chips and improved evacuation, which helps maintain stable cutting conditions when machining rostfreier Stahl with the Tiger‑tec Gold grade. Can this insert handle interrupted cuts or tougher feeds? The 0.4 mm corner radius provides enhanced edge strength, so the insert tolerates moderate interruption and more robust feeds better than very small‑radius alternatives. Which series and coating technology does the insert use? The insert belongs to the Tiger‑tec Gold series and carries the WMP20G coated hardmetal grade for improved wear resistance in demanding stainless applications. Is the geometry compatible with standard VCMT toolholders? Yes, the rhombic 35° VCMT geometry is compatible with standard holders designed for VCMT‑type inserts; choose a rigid holder and appropriate coolant practice to achieve best results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
VCMT110304-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, the Tiger·tec Silver coating and consistent geometry for secure machining of stainless steels; order inserts via Metav Werkzeuge or consult the team for application-specific cutting data. VCMT110304-FM4 WMP20S – Turning insert, Tiger·tec Silver coating for stainless steel (Walter Tools) The VCMT110304-FM4 WMP20S is a rhombic 35° turning insert with an FM4 chipbreaker, designed to deliver stable chip formation and reproducible performance when machining stainless steel under medium to robust conditions. Tiger·tec Silver coating for improved wear resistance WMP20S grade for stainless steel machining FM4 chipbreaker for stable chip control Rhombic 35° geometry with 7° clearance Fewer process interruptions through stable chip control The Tiger·tec Silver-coated grade offers a combination of wear resistance and toughness that supports predictable chip formation when cutting austenitic and other stainless steels. The FM4 chipbreaker is optimised for moderate to heavy cut depths, producing short, controllable chips that reduce the risk of entanglement and machine stops. By reducing unplanned interruptions, the tool contributes to a more continuous production flow and lower overall machining costs. Geometry tuned for consistent surface quality and tool life The rhombic 35° insert geometry and a clearance angle of 7° provide a compromise between strength and accessibility in shoulder and finishing operations. The 0.4 mm corner radius helps to improve edge strength while maintaining a fine surface finish on the component. These geometric choices extend tool life in applications where dimensional repeatability and surface integrity are required, such as serial production of fittings or precision components made from stainless alloys. Coating and grade benefits translated into machining results The WMP20S grade, a coated carbide from Walter Tools’ Tiger·tec Silver family, is formulated to handle the high heat and work-hardening tendency of stainless steel. The coating reduces flank wear and helps maintain a stable cutting edge over longer intervals. For production managers, this translates into fewer insert changes, more consistent component tolerances and a reduced need for corrective rework — measurable gains in both time and material yield. Practical fitment and workshop handling The insert conforms to standard tooling pockets for its designation and is supplied in the common 11 mm inscribed circle and 03 thickness format, allowing quick replacements during tool changes. The nominal designation and consistent tolerance class ensure interchangeability and predictable performance across batches. For shops aiming to standardise tooling for stainless steel turning, this insert represents a balanced choice between robustness and surface quality. Contact Metav Werkzeuge for tailored cutting data, technical consultation or to request a quotation for Walter Tools turning inserts such as the VCMT110304-FM4 WMP20S. Technical data Article number: VCMT110304-FM4-WMP20S-WALTER Designation: VCMT110304-FM4 WMP20S Product type: Turning insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WMP20S Data Clearance angle: 7° Corner radius: 0.4 mm Inscribed circle: 11 mm Thickness: 3.00 mm Tolerance class: M Special features Tiger·tec Silver coating WMP20S coated carbide grade FM4 chipbreaker Rhombic 35° plate form Suitable for stainless steel machining FAQ What materials is this insert suited for? The insert is optimised for stainless steel machining; the WMP20S grade and Tiger·tec Silver coating support secure chip formation and wear resistance in those alloys. How does the FM4 chipbreaker affect cutting? The FM4 chipbreaker produces compact, controllable chips in moderate to robust turning operations, improving process reliability and reducing the chance of chip-related stoppages. Is this insert compatible with standard toolholders? The insert follows the VCMT designation and common dimensional standards (11 mm inscribed circle, 3.00 mm thickness), enabling fitment in standard holders designed for VCMT inserts. What performance gains can be expected from the Tiger·tec Silver coating? The coating enhances heat resistance and reduces flank wear on the cutting edge, yielding longer edge life and more consistent component tolerances in serial stainless steel turning. Walter Tools is a leading manufacturer of precision tools for metalworking and part of the Sandvik Group. Protected trademarks and brand names are used solely for description. The listed item is original, factory-new goods of the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
VCMT110304-FM4 WSM01 T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver thermal stability, the WSM01 grade designed for stainless steels and superalloys, and the precision geometry for consistent chip control and long tool life — order the VCMT110304-FM4 WSM01 turning insert via Metav Werkzeuge or consult our specialists for application advice. VCMT110304-FM4 WSM01 turning insert — Tiger‑tec Silver for stainless steels and superalloys (Walter Tools) VCMT110304-FM4 WSM01 is a high-performance indexable turning insert engineered for demanding machining of stainless steels and heat-resistant superalloys in industrial turning applications Tiger‑tec Silver coating for thermal stability WSM01 grade optimised for stainless and superalloys Rhombic 35° shape for versatile turning operations 7° clearance and 0.4 mm corner radius for precision Enhanced machining performance for demanding materials The combination of the Tiger‑tec Silver series and the WSM01 coated cemented carbide provides a balance of thermal stability and stable chip formation, making this insert suitable for machining tough-to-cut materials such as stainless steels and heat-resistant superalloys. The economical grade selection reduces the risk of built-up edge and supports consistent cutting conditions over extended cycles. In practice, this means fewer tool changes and improved process reliability when facing high temperatures and sticky material behaviour that typically occur during continuous turning. Geometry designed to maintain edge life and part quality Thanks to the rhombic 35° profile and the chipbreaker FM4, the insert controls chip flow and cutting forces effectively. The modest 0.4 mm corner radius and 7° clearance angle contribute to a precise cutting edge that reduces vibration and promotes consistent surface finish. The FM4 chipbreaker is optimised for medium to heavy feeds, breaking chips reliably and helping evacuate heat from the cutting zone. These geometric features translate into reproducible part tolerance and improved cycle-to-cycle stability in series production. Productivity, application guidance and process integration With tolerance class M and a compact thickness designation of 03, this insert fits standard toolholders used in general and heavy-duty turning operations. The grade’s suitability for both stainless steels and superalloys/titanium allows flexible tool planning across mixed-production shops. For best results, pair the insert with stable clamping, adequate coolant strategies, and appropriate cutting parameters that account for the material’s heat characteristics; these measures extend tool life and secure repeatable component quality. For additional machining data or parameter recommendations, Metav Werkzeuge can provide tailored guidance to match specific lathes and workpiece materials. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Silver inserts and receive tailored recommendations for machining stainless steels and superalloys Technical data Article number / SKU: VCMT110304-FM4-WSM01-WALTER Label: Drehwendeschneidplatte VCMT110304-FM4 WSM01 Walter Tools Manufacturer: Walter Tools Core data Size: 11 Corner radius: 0.4 mm Clearance angle: 7° Shape angle: 35° Thickness designation: 03 Special features Series: Tiger‑tec Silver Grade: WSM01 (coated cemented carbide) Chipbreaker: FM4 Material suitability: stainless steels (M), superalloys / titanium (S) Tolerance class: M FAQ What materials is this insert meant for? The VCMT110304-FM4 WSM01 turning insert is specified for stainless steels (M) and heat-resistant superalloys and titanium (S), providing stable chip control under high thermal loads. Which chipbreaker is fitted and what does it do? This insert features the FM4 chipbreaker, which promotes short, controllable chips and efficient evacuation to reduce heat buildup and protect the cutting edge during medium to heavy turning. How does the rhombic 35° geometry affect cutting? The rhombic 35° profile offers versatile approach angles and good access for shoulder and profile turning while helping to distribute cutting forces for consistent surface quality. Is this insert suitable for series production? Yes, the WSM01 grade and Tiger‑tec Silver characteristics are designed for repeatable performance and long tool life, supporting stable processes in series machining. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and brand names remain the property of their respective owners; they are cited here for explanation only and do not indicate any affiliation with our company.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com