CCMT09T304-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, a precise 0.4 mm corner radius and the RM4 chipbreaker for dependable machining of stainless steel; these features deliver stable chip formation and extended tool life. Order the CCMT09T304-RM4 WMP20S insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT09T304-RM4 WMP20S – Rhombic 80° indexable turning insert for stainless steel, Tiger·tec Silver (Walter Tools) The CCMT09T304-RM4 WMP20S is a rhombic 80° indexable turning insert designed for machining stainless steel under medium to robust cutting conditions. CCMT09T304-RM4 WMP20S by Walter Tools Tiger·tec Silver coated carbide 7° clearance angle, Rhombus 80° form 0.4 mm corner radius, RM4 chipbreaker Consistent performance for stainless steel turning The coated carbide grade delivers a balance between wear resistance and edge strength. The Tiger·tec Silver technology improves thermal resistance and supports stable chip formation, which reduces the risk of built-up edge when machining stainless steel (ISO group M). As a result, process reliability is increased and interruptions for tool changes are less frequent, which benefits throughput and cost per part. The insert’s design prioritises steady cutting behaviour in demanding environments. Geometry that enhances surface quality and repeatability The rhombic 80° form combined with a 7° clearance angle and a 0.4 mm corner radius produces predictable cutting forces and improved surface finish on turned components. The RM4 chipbreaker is tuned to promote short, manageable chips in many stainless grades, helping to avoid entanglement and tool damage. With a nominal T3 thickness and standard CCMT footprint, the component enables secure clamping in compatible tool holders and contributes to consistent, repeatable results across batches. Lower tooling costs through longer life and fewer interventions The coated grade and robust edge geometry work together to extend effective tool life. Fewer indexings and less downtime for insert changes mean higher productivity on lathes and turning centres. The combination of wear-resistant coating and optimised chip control translates into measurable savings on consumables and machine time, making the insert an economical choice for series production and maintenance-friendly operations. Application scope and practical guidance Engineered primarily for stainless steel applications, the insert performs well under medium to robust cutting regimes where heat and ductility challenge the cutting edge. The designation WMP20S signals a coated carbide solution intended to support secure machining of ISO group M materials. For uncertain or specialised applications, technical consultation is recommended to match insert geometry and grade to the workpiece grade and machining strategy. Contact Metav Werkzeuge today for availability and application support for the CCMT09T304-RM4 WMP20S insert from Walter Tools Technical Data Article number: CCMT09T304-RM4-WMP20S-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T304-RM4-RM4 WMP20S Walter Tools Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Form: Rhombus 80° Design & Features Grade: WMP20S Series: Tiger·tec Silver Chipbreaker: RM4 Coated carbide construction Suitable for: stainless steel (ISO group M) FAQ Which materials is this insert suitable for? The CCMT09T304-RM4 WMP20S insert is designed primarily for stainless steel (ISO group M) and performs under medium to robust cutting conditions. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal stability and wear resistance, supporting longer tool life and more consistent cutting performance on tough, heat-generating stainless steels. How does the RM4 chipbreaker influence machining? The RM4 chipbreaker promotes controlled chip formation that reduces the risk of long, stringy chips and supports secure evacuation, improving process safety and surface quality during turning. Is the insert compatible with standard CCMT tool holders? The insert uses the CCMT geometry and rhombic 80° form, making it compatible with conventional holders designed for CCMT inserts; correct seating and clamping in the tool holder are essential for repeatable results. What effect does the 0.4 mm corner radius have on the workpiece? A 0.4 mm corner radius balances edge strength and surface finish: it helps absorb cutting shocks and extends edge life while still producing acceptable surface quality for many turned components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
CCMT09T304-RM4 WMP30G WMP30G Wendeplatten - Walter Tools
High-performance Tiger‑tec Gold coated carbide for dependable chip control and prolonged tool life; combines the WMP30G grade with an RM4 chipbreaker and rhombic 80° geometry for stable turning of rostfreier Stahl. Order directly via Metav Werkzeuge or consult the technical team for application advice. CCMT09T304-RM4 WMP30G — Indexable turning insert, rhombic 80°, Tiger‑tec Gold (Walter Tools) The CCMT09T304-RM4 WMP30G is a rhombic 80° indexable insert designed for productive turning of rostfreier Stahl in medium to robust machining conditions Tiger‑tec Gold coating for long tool life Optimised chip control with RM4 chipbreaker Rhombic 80° geometry for versatile turning Suitable for rostfreier Stahl applications Consistent performance where heat and adhesion are a challenge The coated carbide grade WMP30G, part of the Tiger‑tec Gold family, is formulated to resist wear and maintain a stable cutting edge when machining rostfreier Stahl. The coating enhances thermal stability and reduces adhesive wear, which translates into longer tool life and fewer interruptions for insert changes. For production-focused shops this results in a more predictable process window and improved overall equipment effectiveness through longer tool cycles and reduced scrap. Geometry engineered for accuracy and process stability The rhombic 80° profile combined with a 0.4 mm corner radius and a 7° clearance angle gives a balance between cutting strength and edge sharpness. This geometry supports reliable chip formation and surface finish while allowing consistent turning across a range of diameters. The RM4 chipbreaker is tuned to evacuate swarf efficiently in tougher stainless conditions, reducing the risk of built-up edge and improving surface integrity on the workpiece. Practical benefits for workshop productivity As an indexable insert, the component reduces setup time and tooling cost compared with solid carbide alternatives. The T3 thickness and the stable insert form provide repeatable seating in standard toolholders, enabling quick index changes and minimal machine downtime. Combined with the WMP30G coating, the insert offers a cost‑effective balance between durability and cutting performance, making it suitable for frequent batch production and demanding turning tasks. Application advice and compatibility The insert is intended primarily for rostfreier Stahl and similar, tough alloys that demand secure chip control and thermal resilience. The insert seat and ISO designation align with common turning toolholders for straightforward integration into existing tooling systems. For process optimisation, pair the insert with stable clamping and adjust feeds to encourage chip breakage by the RM4 geometry; Metav Werkzeuge can offer guidance on matching insert, holder and cut‑strategy for best results. Contact Metav Werkzeuge today for tailored recommendations on integrating this Walter Tools indexable insert into production or to request machining data for specific rostfreier Stahl grades Technical data SKU: CCMT09T304-RM4-WMP30G-WALTER Article designation: CCMT09T304-RM4 WMP30G Manufacturer: Walter Tools Series: Tiger‑tec Gold Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Geometry: Rhombus 80° Special features Coated carbide grade WMP30G Chipbreaker: RM4 Suitable for rostfreier Stahl ISO designation included in article name FAQ What materials is this insert best suited for? The CCMT09T304-RM4 WMP30G insert is optimised for rostfreier Stahl and similar stainless alloys, where the Tiger‑tec Gold coating and RM4 chipbreaker help manage adhesion and heat. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip formation under higher temperatures typical of stainless machining, reducing built‑up edge and improving surface finish with the WMP30G grade. Can this insert be used in standard turning holders? Yes, the rhombic 80° form and ISO designation are compatible with common indexable toolholders; ensure correct clamping and orientation for repeatable performance. What are the main advantages of the Tiger‑tec Gold coating? Tiger‑tec Gold increases thermal resistance and wear protection, yielding longer tool life and more consistent cutting behaviour in demanding turning operations. Is this insert suitable for automated production runs? The combination of coated carbide, RM4 chip control and repeatable geometry makes the insert well suited to production environments that require stable cycles and predictable tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CCMT09T304-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of a convincing combination of high-temperature resistance, stable chip control and reliable edge life for demanding turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT09T304-RM4 WSM10S turning/boring indexable insert — Tiger·tec Silver, Walter Tools A CCMT09T304-RM4 WSM10S indexable insert designed for turning and boring applications on rostfreier Stahl and heat-resistant superalloys, providing robust performance where thermal and material demands are high Tiger·tec Silver coating for heat resistance Optimised RM4 chipbreaker for stable chip control Suitable for rostfreier Stahl and superalloys Rhombic 80° shape with 0.4 mm corner radius Consistent performance in demanding materials The combination of the Tiger·tec Silver coating and the WSM10S carbide grade delivers a measurable advantage when machining rostfreier Stahl and superalloys: improved heat resistance and a durable cutting edge reduce flank and crater wear under elevated temperatures. The RM4 chipbreaker is engineered to produce controllable chips even when cutting sticky or ductile materials, which helps to avoid workpiece damage and machine downtime. This results in a predictable tool life and contributes to higher overall productivity in series production. Geometry that stabilises cutting and surface finish The rhombic 80° configuration, together with a 0.4 mm corner radius and a 7° free angle, offers a balance between edge strength and form versatility. The Rhombic 80° shape facilitates both plunge and light turning operations, while the moderate corner radius supports consistent surface quality on challenging parts. The insert’s T3 thickness and standard tolerance class M provide dimensional stability during index changes, reducing vibration and ensuring repeatable component quality. Practical application and process advantages As an indexable insert within the Tiger·tec Silver series, this grade is particularly suited to components produced from rostfreier Stahl and heat-resistant alloys that demand reliable chip control and thermal stability. The robust chip control characteristic of the RM4 geometry reduces secondary operations and cleaning time, which benefits throughput and cost per part. Where tool change frequency and process security matter, the insert’s predictable wear behaviour supports scheduled maintenance strategies and consistent output. Manufacturer competence and workplace confidence Produced by a recognised cutting-tool manufacturer, the insert benefits from established production standards and material science behind the WSM10S grade. The focus on stable chip formation and optimised coating technology means fewer interruptions in high-mix environments and a reduction in scrap rates. For operations requiring reproducible results on demanding materials, this solution offers both technical reliability and economic sense. For machining rostfreier Stahl and superalloys with a focus on thermal stability and chip control, contact Metav Werkzeuge to discuss the CCMT09T304-RM4 WSM10S insert, its suitable geometries and matching toolholders — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number / SKU: CCMT09T304-RM4-WSM10S-WALTER Designation: CCMT09T304-RM4 WSM10S Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Shape: Rhombic 80° Special features Series: Tiger·tec Silver Grade: WSM10S (coated carbide) Chipbreaker: RM4 Suitable materials: S / M (superalloys / rostfreier Stahl) Tolerance class: M Execution: T FAQ What materials is this insert intended for? The insert is specified for machining rostfreier Stahl and heat-resistant superalloys; the WSM10S grade and Tiger·tec Silver coating support thermal stability and controlled chip formation. How does the RM4 chipbreaker affect process reliability? The RM4 geometry improves chip control in ductile and cohesive materials, which enhances process stability and reduces the risk of built-up edge on the cutting insert. Which cutting angles and geometries are recommended for finishing? The rhombic 80° layout with a 0.4 mm corner radius offers a compromise between strength and surface finish; for finer finishes, select a smaller nose radius where the tool system and holder permit. Is the insert suitable for both turning and boring operations? Yes—the form and tolerance class make it appropriate as an indexable insert for turning and light boring tasks in applications involving rostfreier Stahl and difficult-to-machine alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are used for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, factory-new product of the manufacturer.
CCMT09T304-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a robust WSM20S grade and the RM4 chipbreaker for stable edge life and consistent chip control; this reduces downtime and supports uninterrupted production. Order the insert directly via Metav Werkzeuge or request advice from their technical consultants. CCMT09T304-RM4 WSM20S – Turning insert, Tiger·tec Silver coating, RM4 chipbreaker (Walter Tools) The CCMT09T304-RM4 WSM20S is a rhombic 80° indexable turning insert designed for heavy machining of rostfreier Stahl and heat‑resistant alloys, combining a wear‑resistant grade with a geometry for secure cutting action Tiger·tec Silver coated carbide grade WSM20S Optimised for rostfreier Stahl and superalloys RM4 chipbreaker for consistent chip control Rhombic 80° geometry with 7° relief Consistent performance in demanding materials The combination of the WSM20S grade and the Tiger·tec Silver coating delivers improved edge stability under thermal and mechanical stress. Intended for tough applications involving rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), the insert’s coated carbide composition helps to limit built‑up edge and to maintain cutting capability at elevated temperatures. For shops aiming to reduce insert changes, this results in fewer interruptions and more predictable component quality. Reliable chip control and process security Built around the RM4 chipbreaker, the geometry promotes short, controllable chips for interrupted or continuous turning. The rhombic 80° shape and 7° relief balance cutting edge engagement and tool strength, while the 0.4 mm corner radius supports improved surface finish and reduced edge chipping. These parameters combine to provide secure chip control and steady cutting forces, which in turn simplifies process planning and results in consistent workpiece quality. Efficient integration and handling for productive machining The insert’s T3 thickness and CCMT format ensure compatibility with standard indexable turning toolholders, enabling quick index changes and repeatable setup. Marked by a coated grade developed for difficult‑to‑cut materials, the design supports higher material removal rates where tool life predictability is essential. For process planning, the insert is a practical choice when machining rostfreier Stahl and superalloys; Metav Werkzeuge can advise on holder selection and cutting parameters to match production goals. Discuss machining strategy for the CCMT09T304-RM4 WSM20S with Metav Werkzeuge's specialists: eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and application support. Technical Data Article number: CCMT09T304-RM4-WSM20S-WALTER Designation: CCMT09T304-RM4 WSM20S Brand: Walter Tools Grade: WSM20S Series: Tiger·tec Silver Core data Geometry: Rhombic 80° Relief angle: 7° Corner radius: 0.4 mm Thickness: T3 Plate size: 09 Chipbreaker: RM4 Tolerance class: M Special features Coating technology: Tiger·tec Silver Material: coated carbide Suitable for: rostfreier Stahl (M), superalloys and titanium (S) Application: heavy‑duty machining of difficult‑to‑cut alloys Manufacturer: Walter Tools FAQ Which materials is this insert suited for? The CCMT09T304-RM4 WSM20S is optimised for rostfreier Stahl and for heat‑resistant superalloys and titanium (ISO groups M and S), providing secure chip formation and edge stability in these materials. What is the advantage of the RM4 chipbreaker? The RM4 chipbreaker on this Walter Tools insert produces short, controllable chips and consistent cutting forces, supporting safer machining and improved surface quality. How does the Tiger·tec Silver coating help? The Tiger·tec Silver coating enhances thermal resistance and wear protection on the WSM20S grade, extending tool life when machining tough materials and reducing the frequency of index changes. Is the insert compatible with standard turning holders? Yes; the CCMT format and T3 thickness are compatible with conventional indexable turning holders designed for rhombic 80° inserts, enabling straightforward integration into existing tooling systems. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the trademark owners. The offered article is an original, factory‑new product of the named manufacturer.
CCMT09T304-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of a highly wear‑resistant Tiger·tec Silver grade and a proven RM4 chipbreaker for secure chip flow and consistent edge life; the combination ensures stable machining of stainless steels and heat‑resistant alloys and supports uninterrupted production. Order the CCMT09T304‑RM4 WSM30S directly via Metav Werkzeuge or contact the specialists for further process recommendations. CCMT09T304‑RM4 WSM30S — Rhombic 80° indexable insert, RM4 chipbreaker, Walter Tools The CCMT09T304‑RM4 WSM30S is a rhombic 80° indexable insert designed for bored and turned components, optimised for machining stainless steels and heat‑resistant superalloys under demanding conditions. High‑temperature stability for tough alloys Optimised RM4 chipbreaker for secure chips Tiger·tec Silver coating for wear resistance Rhombic 80° form with 7° clearance Greater process security for stainless and superalloy machining The combination of the WSM30S grade and the Tiger·tec Silver technology delivers enhanced thermal and wear resistance compared with conventional grades. This insert’s coated carbide composition is engineered to resist the adhesive tendencies and rapid heat generation typical of stainless steels and nickel‑based alloys, reducing the risk of built‑up edge and premature flank wear. The outcome is a more predictable cutting edge life and fewer unplanned tool changes, which supports steady production flow and consistent part quality. Predictable chip control that reduces interruptions Machining ductile or heat‑resistant materials often leads to troublesome chip forms; the RM4 chipbreaker geometry is developed to shape and control chips for stable evacuation. Improved chip control minimises manual chip clearing and reduces the incidence of surface damage to the workpiece, thereby shortening cycle interruptions and improving operational efficiency. This geometry is particularly effective where secure chip segmentation and guided evacuation are required during continuous turning or boring operations. Geometry designed for strength and surface quality The rhombic 80° insert form paired with a 0.4 mm corner radius and 7° clearance angle balances edge strength with fine surface generation. The selected corner radius supports robust cutting edge stability at interrupted cuts and moderate depths of cut, while the 80° form provides versatile engagement for both facing and cylindrical turning tasks. Plate size 09 and thickness T3 ensure a compact footprint with sufficient support for boring and turning applications in medium to heavy machining cycles. Integration into production and tool management As a Walter Tools component from the Tiger·tec Silver series, this insert fits established toolholders that accept CCMT‑style geometries and is straightforward to index during maintenance. The clear material designation and the RM4 chipbreaker simplify process planning for stainless steels and superalloys, allowing procurement and toolroom staff to standardise on a grade that covers a wide range of demanding alloys. For specific application matching or to discuss toolholder compatibility, Metav Werkzeuge provides technical consultation and additional data sheets on request. For tailored recommendations on using Walter Tools inserts for stainless steels and superalloys, contact Metav Werkzeuge to request process data or assistance with selecting the optimal insert geometry and grade. Technical data Article number: CCMT09T304-RM4-WSM30S-WALTER Designation: CCMT09T304-RM4 WSM30S Grade / series: WSM30S, Tiger·tec Silver Manufacturer: Walter Tools Core technical values Clearance angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 09 Thickness: T3 Tolerance class: M Special features and applications Chipbreaker: RM4 Material composition: coated carbide Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Typical applications: turning and boring indexable insert Series characteristics: Tiger·tec Silver for thermal and wear resistance FAQ Is this insert suitable for stainless steels and when should it be preferred? The CCMT09T304‑RM4 WSM30S is specifically formulated for stainless steels, offering thermal stability and reliable chip control that make it a preferred choice for ductile, work‑hardening alloys. What advantages does the Tiger·tec Silver technology provide? Tiger·tec Silver enhances wear resistance and heat shielding on the cutting edge of the WSM30S grade, which contributes to longer edge life and improved process stability when machining demanding materials. How does the RM4 chipbreaker affect machining results? The RM4 chipbreaker produces controlled chip forms that ease evacuation and reduce the risk of entanglement or surface damage, resulting in fewer stoppages and more consistent surface quality. Can this insert be used for both turning and boring operations? Yes; the rhombic 80° form and the specified dimensions make the insert versatile for both turning and boring tasks where a CCMT geometry is applicable. What is the recommended corner radius for interrupted cuts with this insert? The 0.4 mm corner radius offers a balance between edge strength and finish and is suitable for operations that combine moderate depths of cut with occasional interruptions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory‑new goods of Walter Tools.
CCMT09T304-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an RP4 chipbreaker for reliable chip control and extended tool life; the insert is optimised for turning and boring of steel and supports consistent, productive machining. Order the CCMT09T304-RP4 WPP10G directly via Metav Werkzeuge or consult the team for application advice. CCMT09T304-RP4 WPP10G indexable turning and boring insert, Tiger·tec Gold coating, Walter Tools The CCMT09T304-RP4 WPP10G is an indexable insert designed for precision turning and boring of steel, combining a Tiger·tec Gold coating with an RP4 chipbreaker for stable, productive cutting. Tiger·tec Gold coated carbide grade WPP10G RP4 chipbreaker optimised for steel machining Rhombic 80° shape with 0.4 mm corner radius 7° relief angle for versatile cutting Higher uptime through a wear-resistant coating The combination of a Tiger·tec Gold surface treatment and a coated carbide base provides improved wear resistance under the typical heat and strain of steel machining. This grade, identified as WPP10G, is formulated for ISO P applications and covers a wide range of steel types from demanding, wear-prone tasks to more universal conditions. The result is longer tool life and fewer insert changes, which reduces non-productive time and contributes to a more predictable production flow. For operators seeking process stability, the coating technology offers measurable benefits in repeatability and edge retention. Controlled chips and consistent surface quality The RP4 chipbreaker has been engineered to control chip formation during turning and boring operations in steel, delivering smaller, manageable chips and reducing the risk of surface damage. Combined with the rhombic 80° geometry and a 0.4 mm corner radius, the insert enables good surface finishes in both light finishing and medium cutting passes. The modest 7° relief angle supports versatility across different cutting depths and feeds, helping maintain edge stability while avoiding excessive cutting forces. This technical mix translates into consistent part quality and reduced rework. Productivity benefits in everyday workshop use By matching a robust insert geometry with a modern coating, this indexable solution is targeted at production environments where efficiency and repeatable results matter. The grade allocation within the Tiger·tec Gold family means the insert performs across varying steel grades and cutting conditions, offering reliable cycle times and reduced tooling costs per part. Where machining throughput and uptime are priorities, the insert’s specifications support more aggressive feeds without sacrificing component quality, helping to improve overall process economics. Fit, handling and system compatibility The CCMT format and the designation CCMT09T304-RP4 indicate a standard clamping and orientation familiar to most turning toolholders, simplifying stocking and changeover. The plate thickness T3, size 09 and the CCMT form factor ensure straightforward replacement and secure seating in compatible toolholders. Clear labelling and standard dimensions reduce the risk of assembly errors and support consistent set-up times across shifts. For workshops integrating this insert into multi-shift operations, the combination of standard geometry and robust coating aids predictable performance. Contact Metav Werkzeuge for a machining recommendation or to specify the CCMT09T304-RP4 WPP10G for your next production batch; experienced consultants are available to discuss cutting parameters and application suitability. Technical data Article number: CCMT09T304-RP4-WPP10G-WALTER Designation: CCMT09T304-RP4 WPP10G Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RP4 Shape: Rhombic 80° Execution: T Material group: P (suitable for steel) ISO designation: CCMT09T304-RP4 WPP10G FAQ What materials is this insert best suited for? The WPP10G grade and the CCMT09T304-RP4 geometry are optimised for steel (ISO P); this insert is formulated to handle the heat and chip formation typical of turning and boring steel. Can the insert be used for finishing passes? Yes, the rhombic 80° shape with a 0.4 mm corner radius supports finishing and light to medium cutting tasks while maintaining surface quality. How does the RP4 chipbreaker improve machining? The RP4 chipbreaker promotes controlled chip formation in steel applications, reducing the risk of entanglement and improving surface consistency during turning and boring. Is the CCMT09T304-RP4 WPP10G compatible with standard toolholders? The CCMT form and size 09 follow common industry standards, allowing compatibility with a wide range of turning toolholders designed for CCMT inserts. What advantages does the Tiger·tec Gold series provide? Tiger·tec Gold coating enhances edge durability and wear resistance, which contributes to longer tool life and steadier production processes under variable cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The article offered is original, brand-new goods from the manufacturer.
CCMT09T304-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Reliable machining performance is achieved through the combination of the Tiger·tec Gold coating and the RP4 chipbreaker, delivering extended tool life and consistent chip control for steel turning; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific cutting data. CCMT09T304-RP4 WPP20G — Turning indexable insert, Tiger·tec Gold, Walter Tools The CCMT09T304-RP4 WPP20G is a coated carbide turning insert engineered for productive machining of steel in general turning operations and finishing passes. Tiger·tec Gold coating for extended tool life Optimised RP4 chipbreaker for reliable chip control Rhombic 80° shape with 0.4 mm corner radius Designed for steel (ISO P) machining Consistent performance in steel turning The coated WPP20G grade, part of the Tiger·tec Gold family, is formulated for the thermal and mechanical demands of steel machining. Its combination of a wear-resistant coating and a robust substrate results in stable cutting behaviour and predictable flank wear, which reduces the need for frequent insert changes. For applications where process reliability and repeatable part quality matter, this turning grade reduces downtime by maintaining cutting-edge integrity over longer tool life cycles. Precise chip control and surface quality An RP4 chipbreaker is integrated to manage chips effectively under typical steel cutting conditions, promoting continuous, controllable chips that prevent entanglement and workpiece damage. The rhombic 80° geometry, coupled with a 0.4 mm corner radius, supports fine surface finishes and dimensional stability in finishing and medium-depth turning. As a result, cycle times can be optimised without compromising surface integrity, and rework is reduced thanks to consistent chip evacuation. Machine and process economy through longer life By combining coating technology with optimised edge preparation, the insert achieves improved wear resistance and lower flank-load sensitivity. This translates into fewer tool changes and a reduced tooling cost per part, which is particularly advantageous in high-volume production. The economic benefit is evident in extended intervals between indexing and lower tool stock levels required to sustain a production run, aiding predictable production planning. Compatibility and application guidance The insert is designated for ISO P applications and is therefore suited to unalloyed and alloyed steels. The CCMT09T304-RP4 geometry supports common turning tool holders designed for rhombic 80° inserts and a T3 plate thickness. When integrating into existing tool setups, consider feed and speed adjustments to exploit the Tiger·tec Gold coating fully; recommended cutting parameters can be provided for specific steel grades to balance tool life and productivity. For process-oriented recommendations and to obtain cutting-data tailored to Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge and request our application guidance and optimisation support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: CCMT09T304-RP4-WPP20G-WALTER Designation: CCMT09T304-RP4 WPP20G Type: Turning indexable insert (drill/bore and turning compatible) Manufacturer: Walter Tools Grade: WPP20G Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: RP4 Coating: Tiger·tec Gold (coated carbide) Applicable material group: P (steel) Shape: Rhombic 80° Execution: T FAQ What steels is this insert suitable for? The CCMT09T304-RP4 WPP20G is designed for ISO P materials and is suitable for unalloyed and alloyed steels, offering reliable performance across the typical steel machining spectrum. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this insert controls chip formation for improved evacuation and reduced entanglement, which supports safer, more productive turning cycles with better surface quality. Can this insert be used for finishing passes? Yes, the rhombic 80° geometry with a 0.4 mm corner radius is suitable for finishing and light-medium turning operations where surface finish and dimensional control are priorities. What distinguishes the WPP20G grade within Tiger·tec Gold? WPP20G is a balanced Walter Tools grade within the Tiger·tec Gold family, offering a combination of wear resistance and toughness specifically optimised for steel machining applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CCMT09T304-RP4 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective durability, consistent chip control and broad Stahl capability for stable production runs; the coated grade and RP4 chipbreaker keep tool changes to a minimum. Order the CCMT09T304-RP4 WPP30G directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T304-RP4 WPP30G — Turning/boring indexable insert, Tiger‑tec Gold, Walter Tools The CCMT09T304-RP4 WPP30G is a rhombic 80° indexable insert designed for turning and boring applications in Stahl, providing robust edge life and reliable chip formation under typical steel machining conditions Tiger·tec Gold coating for extended tool life RP4 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning 7° clearance angle for secure cutting engagement Maximise productivity on Stahl with a Tiger‑tec Gold grade The coated grade WPP30G combines a modern Tiger·tec Gold technology with a wear-resistant substrate to deliver predictable performance when machining Stahl components. Designed to suit the ISO P group, this insert balances hardness and toughness so that cutting edge life is extended without sacrificing process stability. The result is fewer tool changes, less downtime and a more economical machining cycle for medium to high-volume turning operations. The coating assists at elevated skin temperatures typical of steel turning and supports improved surface finish consistency. Predictable chip control and surface quality from RP4 and geometry The integrated RP4 chipbreaker has been configured for stable chip segmentation and safe evacuation across common Stahl grades. With a 0.4 mm corner radius and the Rhombus 80° form, the insert provides a compromise between strength at the cutting edge and achievable surface quality; sharper radii improve surface finish while the 0.4 mm radius increases edge robustness where interrupted cuts occur. The tolerance class M ensures repeatable seating and interchangeability in standard toolholders, helping to maintain consistent part quality during batch production. Process reliability through measured geometry and standard thickness A clearance angle of 7° and a plate thickness of T3 contribute to secure insert seating and predictable cutting forces during turning cycles. The CCMT designation combined with the RP4 chipformer means proven compatibility with widely used toolholders for both finishing and light-medium roughing tasks. The insert’s specification supports a straightforward toolset-up and rapid redeployment in mixed production lines, reducing setup times and simplifying inventory handling for tooling managers seeking robust and ready-to-use solutions. For application advice or to secure supply of Walter Tools Tiger‑tec Gold inserts like the CCMT09T304-RP4 WPP30G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and delivery Technical Data Article number: CCMT09T304-RP4-WPP30G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T304-RP4 WPP30G Walter Tools Brand: Walter Tools Designation: CCMT09T304-RP4 ISO designation: CCMT09T304-RP4 WPP30G Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: T3 Geometry: Rhombus 80° Tolerance class: M Special features Coating / Series: Tiger‑tec Gold Grade: WPP30G Chipbreaker: RP4 Material group suitability: P (Stahl) Execution: T Wendeplatte ISO designation included: CCMT09T304-RP4 WPP30G FAQ What materials is this insert best suited for? The CCMT09T304-RP4 WPP30G is optimised for the ISO P group and is particularly suited to machining a wide range of Stahl grades, offering balanced wear resistance and toughness. How does the RP4 chipbreaker affect machining? The RP4 chipbreaker on this Walter Tools insert promotes controlled chip segmentation and evacuation, reducing the risk of entanglement and improving process reliability during continuous turning. Can the insert be used for finishing and roughing? With a 0.4 mm corner radius and the Rhombus 80° geometry, this insert covers light-medium roughing and finishing operations, providing a versatile solution for mixed production demands. What does the Tiger‑tec Gold series deliver in practice? Tiger‑tec Gold coating enhances temperature resistance and wear behaviour, which translates into longer edge life and fewer tool changes when machining Stahl under typical industrial conditions. Is the CCMT09T304-RP4 WPP30G interchangeable in standard toolholders? Yes; the CCMT form and tolerance class M ensure compatibility with common clamping systems, enabling straightforward insert replacement and consistent seating accuracy. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308 WPP20G E47 Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coated WPP20G grade and the precise rhombic 80° geometry with a 0.8 mm nose radius and 7° clearance for stable chip formation and consistent component finish; the design supports efficient steel machining with reduced downtime. Order the product directly via Metav Werkzeuge or ask our consultants if needed. CCMT09T308-E47 WPP20G – drilling/bore indexable insert, Tiger·tec Gold grade for steel by Walter Tools A CCMT09T308-E47 WPP20G insert engineered for precision drilling and boring in steel components, offering a balanced mix of wear resistance and toughness for general-purpose and demanding production environments. Tiger·tec Gold coating for longer life Optimised E47 chipformer for chip control Rhombic 80° geometry for versatile entry 0.8 mm nose radius for consistent surface Durable grade engineered for steel productivity The coated carbide WPP20G grade from the Tiger·tec Gold family delivers a targeted balance between wear resistance and toughness, specifically adjusted for ISO P applications (steel). Its coating technology reduces flank wear and improves thermal stability, which translates into longer service intervals and fewer tool changes during batch production. By selecting this grade, workshops gain a reliable cutting edge that copes with the heat and chip characteristics typical of unalloyed and alloyed steels, improving process reproducibility and lowering overall machining costs per component. Precision geometry that improves surface quality and tool life The rhombic 80° insert shape combined with a 0.8 mm nose radius and 7° clearance provides controlled engagement and predictable cutting forces during drilling and boring operations. The geometry supports secure insert seating and consistent chip flow, while the modest nose radius helps achieve stable surface finish without excessive tool load. Tolerance class M signals a manufacturing precision that assures repeatable positioning and interchangeability in toolholders, reducing setup times and ensuring consistent part quality across production runs. Chip control and process security for efficient production An E47 chipformer engineered into the insert flank promotes controlled chip breakage and evacuation in typical steel cutting scenarios, lowering the risk of built-up edge or interrupted cutting. The overall package—coating, chipformer and grade—fosters stable chip formation and a robust cutting edge, which benefits cycle-time-sensitive operations. In practical terms, this means fewer interrupted cuts, less scrap, and improved throughput. The insert’s construction and grade selection reflect Walter Tools’ emphasis on productivity and consistent tool life in industrial metalworking. For tailored recommendations on integrating Walter Tools Tiger·tec Gold inserts into existing tool setups, contact Metav Werkzeuge for technical advice and supply options. Technical data SKU: CCMT09T308-E47-WPP20G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte CCMT09T308-E47 WPP20G Walter Tools Manufacturer: Walter Tools Product type: drilling/bore indexable insert Core specifications Clearance: 7° Nose radius: 0.8 mm Insert size: 09 Thickness: T3 Geometry: Rhombic 80° Tolerance class: M Designs and special features Grade: WPP20G (Tiger·tec Gold coated carbide) Chipformer: E47 Material suitability: steel (ISO P) Series: Tiger·tec Gold FAQ Which materials is this insert suitable for? The CCMT09T308-E47 WPP20G insert is designed for machining steel (ISO P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip behaviour typical of unalloyed and alloyed steels. What does the E47 chipformer do in practice? The E47 chipformer on this insert promotes controlled chip breaking and evacuation in steel cutting, improving process security and reducing the risk of chip-related interruptions during drilling and boring. How does the rhombic 80° geometry affect machining? Rhombic 80° geometry gives versatile entry angles and stable cutting engagement, which helps achieve consistent surface quality and reliable tool seating for boring and drilling operations. Is this insert suitable for finishing or roughing operations? With a 0.8 mm nose radius and the balanced WPP20G grade, the insert is suitable for general finishing and medium material removal in steel; selection should be matched to the specific application requirements and machining parameters. Can this insert be used in standard indexable drill or boring heads? The CCMT09T308-E47 WPP20G designation indicates an indexable insert format compatible with toolholders designed for CCMT inserts; check holder compatibility and mounting orientation before assembly. Manufacturer/Responsible: Walter Tools (Walter AG, brand of Walter Tools; part of Sandvik). Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the brands. The offered item is original, brand-new production of the manufacturer.
CCMT09T308-E47 WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WPP20S carbide grade for consistently stable chip formation and long tool life; the CCMT geometry and 0.8 mm corner radius ensure reliable cutting performance in steel machining. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT09T308-E47 WPP20S drilling/boring indexable insert by Walter Tools — Tiger·tec Silver, rhombic 80° CCMT09T308-E47 WPP20S offers a versatile insert for drilling and bore-enlarging applications in steel, combining coated carbide grade performance with a proven CCMT geometry for secure clamping and predictable cutting behaviour Tiger·tec Silver coating for durability Grade WPP20S tuned for steel machining Rhombic 80° geometry for versatile clamping 0.8 mm corner radius for stable cutting High-performance grade engineered for steel productivity The WPP20S grade, part of the Tiger·tec Silver family, is a coated carbide formulation optimised for machining steel. Its microstructure and coating balance wear resistance and toughness so that the insert handles the typical heat and chip form of steel cutting. This results in longer tool life and fewer insert changes, which improves throughput and reduces unplanned downtime. The grade is categorised as universally applicable within steel machining, giving dependable performance across a range of cutting conditions. Geometry and edge preparation that stabilise cutting results The rhombic 80° form with the CCMT-style pocket designation provides secure seating and repeatable orientation in standard toolholders. The 0.8 mm corner radius reduces edge chipping risk while offering a compromise between edge strength and finishing capability. Combined with a modest 7° relief angle, this geometry supports stable cutting forces during drilling or bore enlargement, improving dimensional consistency and reducing the risk of vibration-related marks on workpieces. Coating technology that extends service intervals The Tiger·tec Silver coating is engineered to improve thermal stability and adhesion on the carbide substrate. This layered surface helps resist abrasive wear and built-up edge formation under the thermal loads typical of steel machining. Fewer interruptions for insert changeover translate into higher effective machine utilisation and an improved cost-per-component metric. The coating also contributes to consistent surface quality over longer tool life, supporting production runs where repeatable finish is required. Chip control and operational advantages for shop-floor efficiency The integrated E47 chipbreaker is designed to manage chip formation during drilling and reaming operations, promoting short, controllable swarf that evacuates reliably from the bore. Better chip control reduces the likelihood of recutting chips or tool breakage and facilitates safer high-feed cycles. Together with the coated grade and robust geometry, the insert supports efficient, predictable machining cycles that aid process planning and reduce the need for corrective rework. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger·tec Silver inserts or request specific cutting data and compatible toolholder recommendations by phone or email Technical data Article number: CCMT09T308-E47-WPP20S-WALTER SKU: CCMT09T308-E47-WPP20S-WALTER Designation: CCMT09T308-E47 WPP20S Product type: Drilling/boring indexable insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WPP20S Facts Relief angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 80° Insert size: 09 Chipbreaker: E47 Thickness: T3 Tolerance class: M Special features Coated carbide grade Optimised for steel (P) Stable chip formation Reliable wear resistance Suitable for drilling and bore-enlarging operations FAQ What materials is this insert intended for? The CCMT09T308-E47 WPP20S insert is optimised for machining steel and is specified for the P material class according to ISO recommendations. How does the Tiger·tec Silver coating benefit production runs? The Tiger·tec Silver coating on the WPP20S grade improves wear resistance and thermal stability, which extends insert life and supports consistent surface quality during longer production runs. Can the insert be used in standard CCMT toolholders? Yes, the CCMT09T308-E47 form follows CCMT geometry and is compatible with standard CCMT-compatible toolholders designed for rhombic 80° inserts. What role does the E47 chipbreaker play? The E47 chipbreaker shapes chip flow for controlled, short chips during drilling and bore enlargement, improving evacuation and reducing recutting risks. Is the insert suitable for finishing or roughing operations? With a 0.8 mm corner radius and coated carbide grade, the insert provides a balance between edge strength and surface finish; it performs well in medium to finishing cuts where stability and repeatable results are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any association with our company. The offered item is original factory-new merchandise from the manufacturer.
CCMT09T308-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a combination of thermal stability, reliable chip control and robust edge integrity for consistent performance in demanding materials; order through Metav Werkzeuge or consult our specialists for process-matched selection and application advice. CCMT09T308-E47 WSM20S Drilling/boring indexable insert — Tiger·tec Silver grade (Walter Tools) A CCMT09T308-E47 WSM20S indexable insert designed for drilling and boring applications in hard-to-machine materials and stainless steel Tiger·tec Silver coated for high thermal resistance Optimised E47 chipbreaker for stable chips Rhombic 80° geometry for versatile engagement 0.8 mm corner radius for enhanced edge strength High-performance cutting in demanding alloys The Tiger·tec Silver grade WSM20S delivers improved heat resistance and wear behaviour when machining stainless steels and high-temperature alloys. The coated carbide construction supports a stable cutting edge under elevated temperatures, reducing flank wear and the risk of built-up edge. Thanks to the E47 chipbreaker and the Rhombic 80° form, the insert controls chip flow during drilling and boring, lowering the likelihood of clogging and enabling smoother evacuation of swarf. This results in more predictable cycle times and fewer interrupted operations. Process security and extended tool life A combination of a 7° relief angle and a 0.8 mm corner radius offers robustness at the cutting edge, helping to withstand the high cutting forces typical for heat-resistant materials. The Walter grade focuses on secure chip formation and consistent edge stability, which translates into fewer insert changes and less machine downtime. The design supports reproducible results across batches, improving overall process reliability and reducing the total cost per hole over longer production runs. Practical selection and machining guidance For roughing and medium-finishing operations in alloys categorised as ISO groups M (stainless steels) and S (superalloys, titanium), choose the WSM20S grade to balance wear resistance and toughness. The Rhombic 80° geometry permits flexible cutting conditions and variable approach angles commonly used in drill- and bore-related toolholders. When pairing with the appropriate drill body or boring bar, the insert’s chip control features support stable cutting at moderate to high feeds; this reduces vibration and aids surface integrity without complex process changes. Speak with Metav Werkzeuge to specify the optimal Walter Tools CCMT insert for the application and secure consistent results in stainless and heat-resistant alloys Technical Data SKU: CCMT09T308-E47-WSM20S-WALTER Designation: CCMT09T308-E47 Full designation: CCMT09T308-E47 WSM20S Product type: Drilling/boring indexable insert Core data Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate form: Rhombus 80° Plate thickness: T3 Tolerance class: M Features Grade: WSM20S (Tiger·tec Silver coated carbide) Chipbreaker: E47 Series: Tiger·tec Silver Workpiece groups: S / M (superalloys/titanium, stainless steels) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The CCMT09T308-E47 WSM20S is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat-resistant superalloys or titanium where thermal resistance and edge stability are required. How does the E47 chipbreaker affect drilling performance? The E47 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation during drilling and boring, which reduces clogging and supports steady cutting forces for improved process security. What cutting conditions favour the WSM20S grade? WSM20S performs well at moderate to high cutting temperatures and is recommended for roughing to medium finishing in tough-to-machine materials; its coated carbide composition balances wear resistance with toughness. Is the 0.8 mm corner radius suitable for finishing? The 0.8 mm radius provides edge robustness and is well suited to stable cutting where surface integrity is important; for very fine finishes a smaller radius may be chosen if available in the system. Which series does this insert belong to and what does that mean? This insert is part of the Tiger·tec Silver series by Walter Tools, indicating a coated carbide concept engineered for enhanced thermal stability and consistent tool life in demanding applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not indicate any affiliation between Metav Werkzeuge and the trademark owners.
CCMT09T308-E47 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a compact Rhombic 80° geometry with E47 chipformer to ensure secure chip control and reproducible performance in demanding drilling and boring operations; order directly via Metav Werkzeuge or request technical advice from the consultants. CCMT09T308-E47 WSM30S drilling/boring indexable insert by Walter Tools — Tiger·tec Silver for rostfreier Stahl and superalloys CCMT09T308-E47 WSM30S is a precision indexable insert designed for demanding drilling and boring applications in hard-to-machine materials Tiger·tec Silver coating for heat resistance and edge stability Optimised E47 chipformer for consistent chip control Suitable for rostfreier Stahl and heat-resistant alloys Rhombic 80° form with 0.8 mm corner radius High-performance coating for demanding materials The combination of the WSM30S grade and the Tiger·tec Silver coating provides a clear advantage when machining materials that generate high temperatures and tend to work-harden. This coated carbide grade is formulated to support stable chip formation and preserve the cutting edge under thermal load, which contributes to longer usable tool life and fewer interruptions in production. The specification explicitly targets ISO groups M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), so the material behaviour and the required heat resistance are addressed at the cutting-material level. For workshops that prioritise consistent machining of difficult alloys, the thermal and mechanical properties of this grade are decisive for process reliability. Geometry and chip control for reproducible results The Rhombic 80° insert shape combined with the E47 chipformer and 0.8 mm corner radius results in controlled chip breakage and stable cutting forces during drilling and boring cycles. A 7° clearance angle and T3 thickness ensure mechanical rigidity in the pocket and reliable indexability; the geometry is chosen to balance cutting-edge strength and accessibility for bore work. Improved chip control reduces the risk of built-up edge and improves surface finish, while the stable edge prolongs service intervals. Technical clarification and machining recommendations can be obtained from Metav Werkzeuge for integration into existing tooling systems and cycle parameter selection. Productivity and predictable performance in series production This insert supports a productive machining strategy: reliable chip evacuation and a robust cutting edge lower scrap rates and machine downtime, which in turn improves overall machining efficiency. The CCMT09T308-E47 designation denotes a compact, indexable solution that is easy to handle in automated tool management systems and suited to batch production. Specifying a grade and geometry that match the workpiece class limits process variation and enables repeatable results across tool changes. For production planners and process engineers, the primary benefit is a reduction in process variability combined with the proven metallurgy and coating technology of a recognised manufacturer. Contact Metav Werkzeuge for delivery schedules and application-specific recommendations on Walter Tools Tiger·tec Silver inserts Technical data Article number: CCMT09T308-E47-WSM30S-WALTER Designation: CCMT09T308-E47 Insert grade: WSM30S Series: Tiger·tec Silver Chipformer: E47 Geometry: Rhombic 80° Manufacturer: Walter Tools Facts Corner radius: 0.8 mm Clearance (free) angle: 7° Thickness: T3 Insert size: 09 Tolerance class: M Execution: T3 form Materials & features Coating: Tiger·tec Silver (coated carbide) Suitable material groups: M (rostfreier Stahl), S (heat-resistant superalloys and titanium) Application: drilling / boring indexable insert Optimised for stable chip formation and edge retention Compact rhombic form for improved accessibility FAQ What materials is this insert intended for? The CCMT09T308-E47 WSM30S insert is specified for ISO groups M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), offering heat resistance and edge stability for these materials. How does the E47 chipformer benefit machining? The E47 chipformer on this Walter Tools insert promotes consistent chip breakage and evacuation, which leads to fewer interruptions and improved surface quality in drilling and boring tasks. Which geometry details are most important for setup? Key geometry data are the Rhombic 80° form, 0.8 mm corner radius and 7° clearance; these determine insert accessibility, cutting-edge strength and pocket clamping requirements for stable operation. Is this insert suitable for automated tool systems? The compact CCMT09T308-E47 designation and standardised form factor make the insert compatible with automated tool management and indexable-insert programmes from major toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Markennamen wie Walter Tools werden ausschließlich zu Erklärungszwecken genannt.
CCMT09T308-FK6 WKK10S Wendeplatten - Walter Tools
Combine the Tiger·tec Silver coating with the FK6 chipbreaker and a 0.8 mm corner radius for robust, long-life performance when machining cast iron; order the CCMT09T308-FK6 WKK10S directly via Metav Werkzeuge or contact our consultants for tailored application advice. CCMT09T308-FK6 WKK10S Drilling/Boring & Turning indexable insert – Tiger·tec Silver, for cast iron, Walter Tools A CCMT09T308-FK6 WKK10S is a multi-purpose indexable insert designed for drilling, boring and light turning in cast iron components, combining a coated carbide grade with a chipforming geometry optimised for ISO K materials. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining (ISO K) FK6 chipbreaker for controlled chip formation Rhombic 80° shape with 0.8 mm corner radius High-productivity grade for abrasive cast iron work The combination of Tiger·tec Silver technology and the WKK10S grade delivers excellent wear resistance and consistent edge life when facing the abrasive nature of cast iron. The coated carbide is engineered to withstand frequent micro-abrasion and the short, breaking chips typical of cast materials, which means fewer tool changes and more productive machining cycles. This results in a measurable increase in process uptime and predictable maintenance intervals for batch production. Geometry tuned for reliable chip control and surface quality The FK6 chipbreaker is designed to produce controlled chips in grey and nodular cast iron, reducing the risk of clogging and improving swarf ejection in both drilling and turning operations. The rhombic 80° orientation together with a 0.8 mm corner radius and 7° relief provides a balance between edge strength and cutting accuracy, while the T3 thickness ensures stable clamping in common indexable insert holders. The result is lower cutting forces and improved surface finish with repeatable results across multiple parts. Practical integration and process benefits for workshops This insert is suitable for versatile use in combined drilling/boring and light turning applications where cast iron is the principal workpiece material. The standardised CCMT geometry simplifies toolholder selection and spare-parts logistics. By choosing this grade and geometry, workshop managers gain a consistent, efficient solution that cuts downtime and supports stable production planning. If clarification on holder compatibility or recommended cutting parameters is required, Metav Werkzeuge provides application support and technical advice to assist process optimisation. For reliable cast iron machining with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for expert guidance and prompt supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT09T308-FK6-WKK10S-WALTER Designation: CCMT09T308-FK6 WKK10S Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S (coated carbide) Chipbreaker: FK6 Application: Cast iron (ISO K) FAQ Is this insert suitable for all cast iron types? The CCMT09T308-FK6 WKK10S is optimised for ISO K materials and performs well on common cast irons; suitability for specific alloys should be checked against machining conditions. Can the insert be used for finish turning as well as drilling operations? Yes, the insert’s rhombic 80° geometry and 0.8 mm corner radius allow light turning and finishing when used in appropriate toolholders. What benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WKK10S grade enhances wear resistance and tool life under the abrasive conditions typical of cast iron machining. How does the FK6 chipbreaker affect chip control? The FK6 geometry produces short, controllable chips in grey and nodular cast iron, improving swarf evacuation and reducing the risk of chip entanglement. Which holders fit the CCMT09T308-FK6 insert? Standard CCMT indexable insert holders compatible with rhombic 80° CCMT inserts are suitable; check holder specifications for thickness T3 and clamping requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer.
CCMT09T308-FK6 WKK20S Wendeplatten - Walter Tools
A robust solution for cast-iron machining: the combination of the Tiger·tec Silver coating and the WKK20S grade delivers long tool life and stable wear behaviour, while the FK6 chipbreaker ensures reliable chip control and less downtime. Order the insert directly via Metav Werkzeuge or consult the team for application advice. CCMT09T308-FK6 WKK20S drilling/turning indexable insert — Tiger·tec Silver, for cast iron CCMT09T308-FK6 WKK20S is an indexable insert engineered for efficient drilling, reaming and turning in cast iron applications, combining a coated carbide grade with a specialised chipbreaker and versatile rhombic geometry Tiger·tec Silver coating for extended tool life Optimised FK6 chipbreaker for reliable chip control Designed for cast iron machining (ISO K) Rhombic 80° geometry with 0.8 mm corner radius High productivity through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKK20S carbide grade is engineered to extend tool life and maintain consistent cutting-edge performance in abrasive materials. This coated hardmetal grade is tuned for the specific wear patterns encountered when machining cast iron, reducing flank and crater wear and stabilising cutting performance over longer production runs. The result is fewer tool changes and a more predictable process window, which supports higher overall equipment effectiveness and lower unit costs. Controlled chip formation for safer, continuous operation Integrated with an FK6 chipbreaker, the cutter pocket geometry promotes short, broken chips typical of grey and ductile cast irons, which assists chip evacuation and reduces the risk of entanglement. The optimised chip control lowers heat concentration at the cutting edge and improves surface consistency, making the insert particularly suitable where clean chip flow and stable machining are required. This leads to improved cycle reliability and easier machine handling in continuous or automated production. Geometry and edge preparation that add flexibility The rhombic 80° insert form offers a versatile approach to a range of turning and boring tasks, combining a stable seating in toolholders with accessibility in confined or stepped profiles. A 0.8 mm corner radius provides a balance between edge strength and surface finish, while the 7° clearance angle helps to reduce rubbing and avoid notch formation at the cutting edge. The T3 plate thickness and the size code 09 ensure mechanical rigidity for interrupted cuts and moderate depths of cut without compromising accuracy. Ready for integration in standard toolholders and production lines Produced to tolerance class M, the insert fits common CCMT toolholder systems and can be indexed to use multiple cutting edges, improving cost-per-edge economy. The CCMT09T308-FK6 WKK20S insert supports a focused tool inventory strategy for cast-iron work, allowing straightforward replacement and minimal set-up adjustments. Its stable wear characteristics and chip control contribute to consistent part quality and reduced cycle variability, supporting leaner operations and predictable throughput. Contact Metav Werkzeuge to discuss how the CCMT09T308-FK6 WKK20S insert can optimise cast-iron machining in your process and to arrange supply or technical consultation — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: CCMT09T308-FK6-WKK20S-WALTER SKU: CCMT09T308-FK6-WKK20S-WALTER Product type: drilling/reaming and turning indexable insert Grade: WKK20S Series: Tiger·tec Silver Facts Free angle: 7° Corner radius: 0.8 mm Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: FK6 Coating technology: Tiger·tec Silver (coated carbide) Material application: cast iron (ISO K) Designation: CCMT09T308-FK6 WKK20S FAQ What materials is this insert intended for? The CCMT09T308-FK6 WKK20S insert is designed primarily for cast iron machining (ISO K), with the WKK20S grade optimised for abrasive wear and short, breaking chips. How does the FK6 chipbreaker benefit production? The FK6 chipbreaker provides reliable short-chip formation in cast-iron applications, improving chip evacuation and reducing the risk of chip entanglement during continuous turning or drilling operations. Is the insert compatible with standard CCMT toolholders? Yes, the insert follows the CCMT geometry and, produced to tolerance class M, is compatible with common CCMT toolholders for easy integration and indexing. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and heat management at the cutting edge, which extends tool life and stabilises machining performance on abrasive cast-iron materials. Can this insert be used for interrupted cuts and roughing? With a 0.8 mm corner radius and a robust plate thickness, the insert provides mechanical rigidity suitable for interrupted cuts and moderate roughing in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
CCMT09T308-FM4 WMP20G FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a dedicated WMP20G carbide grade and the FM4 chipbreaker for consistent chip control and extended tool life; order the CCMT09T308-FM4 WMP20G directly via Metav Werkzeuge or consult the team for application advice. CCMT09T308-FM4 WMP20G rhombic 80° indexable insert for stainless steel, Walter Tools The CCMT09T308-FM4 WMP20G is a rhombic indexable turning and boring insert engineered for reliable machining of stainless steels under medium to robust cutting conditions. CCMT09T308-FM4 WMP20G insert, Tiger·tec Gold Optimised for stainless steel machining (ISO M) FM4 chipbreaker for secure chip control Rhombic 80° shape with 0.8 mm nose radius Durable carbide grade that secures stable cutting in stainless steels The combination of the WMP20G grade with the Tiger·tec Gold coating delivers a coated carbide solution optimised for the typical challenges of machining stainless steels (ISO M). The microstructure and coating chemistry are tuned to reduce built-up edge and to support stable chip formation, which translates directly into longer cutting edge life and fewer unplanned interruptions. In practice, this means more predictable batch runs and improved process reliability when turning or boring corrosion-resistant alloys, especially where toughness and heat generation would otherwise shorten tool life. Geometry and chip control that improve surface finish and reproducibility The insert’s rhombic 80° platform, combined with a 0.8 mm nose radius and 7° clearance, provides a balance of cutting strength and versatility for profile and finishing passes. The FM4 chipbreaker is tailored for stainless applications and ensures consistent chip segmentation and evacuation under varying cutting parameters. The insert thickness T3 and the CCMT form give mechanical stability at the cutting edge, reducing vibration and helping to achieve a repeatable surface roughness while protecting the cutting edge from thermal and mechanical overload. Greater process security and economical series machining Designed for medium to robust conditions, this indexable insert contributes to higher process security and measurable gains in productivity: fewer tool changes, stable cutting forces and improved component finish. The consistent edge maintenance provided by the grade and geometry supports predictable tool life, simplifying production planning and reducing scrap risk. As part of Walter Tools’ Tiger·tec Gold family, the insert is suited to environments where repeatable performance and reliable chip control are priorities, offering a practical route to lower cost per component in serial production. Contact Metav Werkzeuge for tailored cutting data, delivery options and genuine Walter Tools inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCMT09T308-FM4-WMP20G-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT09T308-FM4 WMP20G Manufacturer: Walter Tools Carbide grade: WMP20G (Tiger·tec Gold) Facts Insert size: 09 Shape: Rhombus 80° Nose radius: 0.8 mm Free angle: 7° Thickness: T3 Special features Series: Tiger·tec Gold Chipbreaker: FM4 Execution: T Tolerance class: M Suitable for: stainless steels (ISO M) FAQ What materials is this insert designed for? The CCMT09T308-FM4 WMP20G is specified for stainless steels (ISO M) and performs reliably under medium to robust cutting conditions. How does the FM4 chipbreaker help in practice? The FM4 chipbreaker improves chip control and evacuation during turning, which reduces the risk of entanglement and supports consistent surface quality with this Walter Tools insert. Which geometry benefits finishing operations? The rhombic 80° shape together with a 0.8 mm nose radius and 7° clearance achieves a balance between strength and finish capability for both profiling and light finishing passes. Is this insert suitable for interrupted cuts or unstable setups? Thanks to the insert thickness T3 and the robust WMP20G grade, the design increases mechanical stability and is more tolerant of tougher conditions than standard grades. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory-new product of Walter Tools.
CCMT09T308-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WMP20S grade for reliable performance in stainless-steel turning and boring; the FM4 chipbreaker and rhombic 80° geometry deliver stable chip control and consistent surface quality. Order the CCMT09T308-FM4 WMP20S directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCMT09T308-FM4 WMP20S – Rhombic 80° indexable insert for stainless-steel turning (Walter Tools) CCMT09T308-FM4 WMP20S is a rhombic 80° indexable insert designed for turning and boring operations on stainless steel, combining a coated carbide grade with an FM4 chipbreaker for secure chip formation. Tiger·tec Silver coating for longer tool life Optimised FM4 chipbreaker for stable chip flow Designed for stainless steel machining Rhombic 80° shape with 0.8 mm corner radius Consistent performance for stainless-steel machining The CCMT09T308-FM4 WMP20S combines the Tiger·tec Silver coating with the WMP20S grade to tackle the specific challenges of stainless steel: toughness, tendency to form built-up edge and high heat generation. The coated carbide substrate is engineered to support safe chip formation under medium to robust conditions, reducing the risk of premature edge breakdown. The result is a dependable cut that maintains dimensional stability and reduces unscheduled tool changes, supporting uninterrupted production cycles. Improved chip control and surface finish A dedicated FM4 chipbreaker paired with the rhombic 80° geometry and a 0.8 mm corner radius ensures predictable chip formation and evacuation. The moderate corner radius offers a balance between strength and finish, helping to produce consistent surface quality while prolonging insert life. The 7° clearance angle optimises engagement with the workpiece and mitigates rubbing, contributing to lower cutting forces and improved thermal behaviour during continuous turning operations. Practical application and process guidance This insert is primarily suited to machining stainless steel and is intended for turning and boring tasks where reliability and reproducible results are required. The T3 plate thickness and standard CCMT form make it compatible with common toolholders for indexable inserts; correct clamping and recommended cutting parameters will further enhance performance. For process optimisation—such as selecting feed rates or finishing strategies—the combination of the FM4 chipbreaker and Tiger·tec Silver technology provides a stable basis for achieving repeatable results across batch and single-part production. For tailored cutting strategies or availability of the CCMT09T308-FM4 WMP20S from Walter Tools, contact Metav Werkzeuge for expert consultation and fast supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT09T308-FM4-WMP20S-WALTER Product designation: CCMT09T308-FM4 WMP20S Product type: Drilling/boring indexable insert / turning indexable insert Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: T3 Shape: Rhombus 80° Tolerance class: M Series: Tiger·tec Silver Special features Grade: WMP20S Chipbreaker: FM4 Coated carbide (beschichtetes Hartmetall) Suitable material: stainless steel Execution: T FAQ What materials is this insert suited for? The CCMT09T308-FM4 WMP20S insert is specified for stainless steel machining and is optimised for medium to robust cutting conditions. How does the FM4 chipbreaker benefit the process? The FM4 chipbreaker on this Walter Tools indexable insert promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving surface consistency. Can this insert be used for both turning and boring? Yes, the rhombic 80° geometry and T3 thickness make the insert suitable for a range of turning and boring applications where a balanced edge strength and finish are required. What advantage does the Tiger·tec Silver series provide? The Tiger·tec Silver coating enhances thermal resistance and wear performance on coated carbide grades, supporting longer tool life and steady cutting behaviour in demanding stainless-steel operations. How does the 0.8 mm corner radius affect results? A 0.8 mm radius offers increased edge stability compared with smaller radii, helping to extend insert life while maintaining an acceptable surface finish for general turning tasks. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product of the manufacturer.
CCMT09T308-FM4 WSM01 FM4 Wendeplatten - Walter Tools
Take advantage of the combination of WSM01 coated carbide in the Tiger‑tec Silver series and the FM4 chipbreaker for reliable chip control when machining stainless steels and heat‑resistant alloys; order the CCMT09T308-FM4 WSM01 directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. CCMT09T308-FM4 WSM01 — Indexable insert for turning and boring, Tiger‑tec Silver (Walter Tools) A CCMT09T308-FM4 WSM01 is a coated carbide indexable insert designed for turning and boring operations, optimised for stainless steels and heat‑resistant superalloys in demanding production environments. Tiger‑tec Silver, WSM01 coated carbide Optimised FM4 chipbreaker for stable chips Rhombic 80° geometry, 0.8 mm corner radius Suitable for stainless steels and superalloys High‑performance grade for difficult‑to‑cut alloys The WSM01 grade from the Tiger‑tec Silver series is a coated carbide formulation engineered for materials that challenge conventional tooling. Its composition balances wear resistance and thermal stability, which helps maintain a stable cutting edge when machining stainless steels and heat‑resistant alloys. In practical terms, this means fewer insert changes during long runs and more predictable component quality — a direct gain in machine uptime and process reliability. Chip control that improves cycle times and safety Equipped with the FM4 chipbreaker, the insert promotes short, controllable chips and reduced risk of built‑up edge. The chip control design lowers the chance of entanglement and enhances coolant penetration, supporting higher effective cutting parameters without compromising tool life. These characteristics translate into measurable efficiency: more consistent material removal and fewer interruptions for chip clearing, which benefits throughput and operator safety. Geometry tuned for surface quality and edge strength The rhombic 80° shape combined with a 0.8 mm corner radius and 7° clearance achieves a balance between edge strength and surface finish. The corner radius supports interrupted cuts and higher feed rates, while the clearance angle reduces rubbing and heat generation at the flank. The result is improved consistent surface finish and repeatable dimensional control, especially in parts where finish and tolerance are critical. Robust design and shop‑floor compatibility With a plate thickness of T3 and the ISO designation CCMT09T308-FM4, the insert fits common turning toolholders and is suitable for standard clamping systems. The coated surface treatment of the Tiger‑tec Silver series enhances resistance to abrasion and thermal loading, supporting longer life in serial production. For operations working across stainless and high‑temperature alloys, this insert provides a dependable combination of performance and handling efficiency. For machining tasks that require secure chip control and stable performance on stainless steels and superalloys, contact Metav Werkzeuge for tailored advice or to arrange supply of Walter Tools inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: CCMT09T308-FM4-WSM01-WALTER SKU: CCMT09T308-FM4-WSM01-WALTER ISO designation: CCMT09T308-FM4 WSM01 Numerical data Corner radius: 0.8 mm Clearance angle: 7° Plate size: 09 Plate thickness: T3 Geometry: Rhombic 80° Design and special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: FM4 Execution: T Tolerance class: M Applicable material groups: S, M Suitable for rostfreier Stahl FAQ Which materials are best machined with this insert? The CCMT09T308-FM4 WSM01 insert is suited for stainless steels and heat‑resistant superalloys; the WSM01 grade supports stable chip formation and edge life in these groups. What benefit does the FM4 chipbreaker provide? The FM4 chipbreaker on the Walter Tools insert produces short, controllable chips, improving coolant access and reducing built‑up edge, which supports uninterrupted machining. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for interrupted cuts and allows higher feed rates while helping to maintain surface quality on challenging materials. Is this insert compatible with standard turning holders? Yes, the CCMT09T308-FM4 designation and T3 thickness make the insert compatible with common turning toolholders designed for CCMT geometry. What makes the Tiger‑tec Silver series advantageous? The Tiger‑tec Silver coating improves abrasion resistance and thermal stability, resulting in longer tool life and consistent performance across serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-FM4 WSM10S T Wendeplatten - Walter Tools
Take advantage of the combination of stable edge life, Tiger·tec Silver coating and controlled chip formation for consistent results when machining stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT09T308-FM4 WSM10S indexable insert — Walter Tools, Tiger·tec Silver, Rhombus 80°, 0.8 mm radius The CCMT09T308-FM4 WSM10S is an indexable turning and boring insert designed for demanding machining of rostfreie Stähle and heat‑resistant superalloys, featuring the Tiger·tec Silver coating and an FM4 chipbreaker for secure chip control Tiger·tec Silver coating for longer tool life FM4 chipbreaker for controlled chips and surface finish Rhombus 80° geometry for versatile turning applications 0.8 mm nose radius for improved edge strength High reliability from coating and grade The combination of the Tiger·tec Silver coating and the WSM10S grade delivers improved wear resistance and thermal stability during interrupted cuts and continuous turning. The coating reduces flank wear and helps maintain a stable cutting edge when machining rostfreie Stähle and heat‑resistant alloys, which are prone to work hardening and high cutting temperatures. As a result, tool life is extended and machining runs with fewer insert changes, supporting predictable production cycles and lower tooling downtime. Precise chip control for safer production Equipped with the FM4 chipbreaker, this insert produces short, manageable chips under a wide range of cutting conditions. The chip control geometry reduces the risk of entanglement and scatter, improving operator safety and simplifying chip evacuation in automated and manual turning operations. Controlled chips also contribute to a consistent surface finish, reducing the need for secondary processing and supporting efficient downstream workflows. Geometry and edge design for productivity The Rhombus 80° form with a 0.8 mm corner radius balances strength and versatility: it allows secure entry angles for general turning while maintaining edge robustness during interrupted cuts. The 7° clearance angle minimises rubbing and helps prevent excessive heat generation at the flank face. Together, these geometric choices enable higher cutting parameters with reliable results, particularly when combined with a suitable toolholder and cutting data adapted for stainless steels and difficult‑to‑cut alloys. Application guidance and machining benefit Selecting this insert supports a productivity‑oriented machining strategy for demanding materials. The coated, WSM10S grade is suitable for applications where stable chip formation and thermal resistance are required, such as automotive components, valve bodies and aerospace parts made from rostfreie Stähle or high‑temperature alloys. By focusing on cutting parameter optimisation and appropriate coolant strategy, the insert can deliver consistent surface quality and repeatable tool life, reducing overall process variability. Contact Metav Werkzeuge for tailored cutting data and availability of Walter Tools Tiger·tec Silver inserts and receive practical advice for integration into existing production chains. Technical data Article number: CCMT09T308-FM4-WSM10S-WALTER Product designation: CCMT09T308-FM4 WSM10S Manufacturer: Walter Tools Type: Indexable turning/boring insert Facts Corner radius: 0.8 mm Clearance angle: 7° Insert size: 09 Thickness: T3 Special features Coating: Tiger·tec Silver Grade: WSM10S (coated cemented carbide) Chipbreaker: FM4 Shape: Rhombus 80° Application groups: M (rostfreie Stähle), S (heat‑resistant superalloys and titanium) FAQ What materials is this insert suited for? The CCMT09T308-FM4 WSM10S insert from Walter Tools is designed primarily for rostfreie Stähle (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and controlled chip formation. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM10S grade reduces abrasive and adhesive wear, improving edge life during high‑temperature cuts and making the insert suitable for sustained machining of tough alloys. Which operations benefit most from the FM4 chipbreaker? Turning and light boring operations with a need for short, curled chips benefit most; the FM4 chipbreaker ensures predictable chip flow and better surface finish with fewer secondary steps. Can the insert handle interrupted cuts? Yes — the 0.8 mm nose radius and the WSM10S grade provide a robust cutting edge that tolerates moderate interruptions while maintaining stable performance. Is the Rhombus 80° geometry versatile for different turning tasks? The Rhombus 80° shape is well suited for general turning profiles and offers favourable entry angles for both conventional and semi‑finish operations, making it a flexible choice for many workshops. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
CCMT09T308-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
High wear resistance and optimised chip control make this insert a reliable choice for machining demanding alloys; the Tiger·tec Silver coating and the WSM20S grade extend edge life and process stability. Combined with a 0.8 mm corner radius and a rhombic 80° form with a 7° clearance angle, the insert delivers consistent results in rostfreier Stahl and heat‑resistant superalloys. Order directly via Metav Werkzeuge or request application advice from their specialists. CCMT09T308-FM4 WSM20S indexable insert – Tiger·tec Silver coating, 0.8 mm radius | Walter Tools A compact CCMT09T308-FM4 WSM20S indexable insert engineered for high‑performance turning and boring of rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for heat resistance Suitable for stainless steels and superalloys 0.8 mm corner radius for edge strength Rhombic 80° form with 7° clearance angle Durable coating and longer tool life for demanding alloys The combination of the Tiger·tec Silver coating and the WSM20S grade provides elevated thermal stability and wear resistance when machining tough materials. This results in prolonged tool life and fewer tool changes, which directly improves shop floor efficiency. The coated carbide substrate supports stable cutting edges under high temperatures and built‑up edge tendencies typical for rostfreier Stahl, while the specified tolerance class M ensures consistent geometry across production batches. Geometry that improves chip formation and surface quality The insert’s rhombic 80° profile and 7° clearance angle reduce cutting forces and support predictable chip flow. A 0.8 mm corner radius enhances edge strength for interrupted cuts and varying feed rates, aiding in consistent surface finish and dimensional accuracy. The FM4 chipbreaker is tuned to the material groups indicated, helping to break and evacuate chips reliably and lowering the risk of recutting or surface damage in medium to heavy turning operations. Process reliability and productivity in serial manufacturing Built for reliable performance in turning and boring applications, this indexable insert contributes to stable machining parameters and repeatable cycle times. The material designation S / M indicates suitability for heat‑resistant superalloys and rostfreie Stähle respectively, allowing process engineers to standardise tooling for mixed production runs. Reduced downtime from longer edge life and the predictable behaviour of the grade support higher overall productivity and lower unit cost over long production runs. Practical application guidance and compatibility The insert is compatible with standard CCMT toolholders and is designed for versatile use across turning and light boring operations. Selection of the correct cutting data—feed, speed and depth of cut—depends on the workpiece alloy and hardness; when machining rostfreier Stahl a focus on stable feeds and adaptable cutting speeds reduces heat concentration and promotes secure chip formation. For titanium and nickel‑base superalloys, the thermal benefits of the Tiger·tec Silver coating help maintain edge integrity under elevated cutting temperatures. Contact Metav Werkzeuge for tailored cutting data, availability of Walter Tools CCMT09T308-FM4 WSM20S inserts and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT09T308-FM4-WSM20S-WALTER ISO designation: CCMT09T308-FM4 WSM20S Series: Tiger-tec Silver Manufacturer: Walter Tools Core dimensions Insert size: 09 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Plate form: Rhombus 80° Tolerance class: M Materials & special features Grade: WSM20S Chipbreaker: FM4 Material applicability: S / M Coating: Tiger·tec Silver Execution: T FAQ Which materials is this insert intended for? The CCMT09T308-FM4 WSM20S insert is specified for rostfreie Stähle (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the S / M material applicability of the WSM20S grade. What coating and grade does the insert feature? The insert uses the Tiger·tec Silver coating and the WSM20S coated‑carbide grade, designed for improved thermal resistance and stable cutting edges in demanding materials. What are the key geometry benefits of this insert? The rhombic 80° form with a 7° clearance angle and a 0.8 mm corner radius deliver robust edge strength, reduced cutting forces and improved chip control via the FM4 chipbreaker. Can this insert be used for both turning and boring operations? Yes, the design supports indexable turning and light boring duties when mounted in compatible CCMT toolholders; suitability depends on toolholder compatibility and cutting parameters. What tolerance and execution are specified for consistent performance? The insert is supplied in tolerance class M with execution T, ensuring uniform geometry and reliable interchangeability in production environments. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CCMT09T308-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver coating and the WSM30S grade, this indexable insert offers enhanced wear resistance and stable chip formation when machining demanding stainless steels and heat‑resistant superalloys; order or request guidance from Metav Werkzeuge for fast procurement and application advice. CCMT09T308-FM4 WSM30S indexable turning insert, Tiger·tec Silver – for stainless steels and superalloys | Walter Tools The CCMT09T308-FM4 WSM30S is an indexable turning insert designed for robust performance in machining stainless steels and heat‑resistant superalloys, combining a coated carbide grade with a chipbreaker geometry for reliable metal removal. Tiger·tec Silver coating for high wear resistance Rhombic 80° CCMT geometry for versatile turning FM4 chipbreaker for controlled chip formation 0.8 mm nose radius with 7° relief for stable cutting Longer tool life and process security for demanding materials The combination of the Tiger·tec Silver coating and the WSM30S carbide grade delivers increased resistance to abrasion and thermal load, which directly improves tool life in difficult machining tasks. This means fewer tool changes and more stable production cycles when working with materials that tend to work‑harden. The coated substrate supports a consistent cutting edge, reducing the risk of unexpected edge failure and providing measurable gains in process security. Consistent surface finish with targeted chip control With the FM4 chipbreaker and the rhombic 80° geometry, the insert produces short, controllable chips and helps maintain a steady surface quality on turned components. The geometry reduces vibration in many set‑ups, while the chipbreaker manages material evacuation in both stainless steels and superalloys, lowering the likelihood of built‑up edge and surface damage. Improved chip control contributes to repeatable part quality and less rework. Precision geometry designed for reliable turning performance The insert’s 0.8 mm nose radius and 7° relief balance strength and accuracy: the nose radius supports edge robustness for interrupted cuts and heavy passes, while the relief angle promotes secure clearance and reduced rubbing. The CCMT style allows indexed reuse of the cutting edges, making the component cost‑effective in batch production. Together, these features provide predictable behaviour in both roughing and semi‑finishing operations. Practical suitability and selection guidance for workshop use As a coated carbide indexable insert in the Tiger·tec Silver family, this grade is tailored to the thermal and mechanical demands of stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). When selecting cutting parameters, prioritise moderate cutting speeds and rigid set‑ups for the best balance between life and surface integrity. If additional data or parameter support is needed, Metav Werkzeuge can provide application advice and matching toolholders. For specification support or to order Walter Tools Tiger·tec Silver inserts like the CCMT09T308-FM4 WSM30S, contact Metav Werkzeuge for tailored advice and quick delivery assistance. Technical Data Article number / SKU: CCMT09T308-FM4-WSM30S-WALTER Designation: CCMT09T308-FM4 WSM30S Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Core Data Relief angle: 7° Nose radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: M Special features Coating technology: Tiger·tec Silver Coated carbide cutting grade Chipbreaker: FM4 Suitable for stainless steels (ISO M) Suitable for heat‑resistant superalloys/titanium (ISO S) FAQ What materials is this insert suitable for? The CCMT09T308‑FM4 WSM30S insert from Walter Tools is suitable for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S). What are the key geometry details to note? The insert features a rhombic 80° geometry with a 0.8 mm nose radius and 7° relief, designed to balance edge strength and precision in turning operations. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the WSM30S grade promotes controlled, short chips and stable material evacuation, improving surface finish and reducing built‑up edge risk during turning. Can the insert be indexed to use multiple cutting edges? Yes; the CCMT format is an indexable turning insert allowing multiple edges to be used sequentially, supporting economical tool usage in batch production. Is this grade suitable for interrupted cuts? The combination of the WSM30S grade and a 0.8 mm nose radius gives enhanced edge robustness, making it suitable for applications that include interrupted cuts under appropriate conditions. Manufacturer: Walter Tools (Walter AG), Tübingen, Germany Protected trademarks and product names remain the property of their respective owners. The mentioned brand is stated for explanation purposes only; there is no affiliation between our company and the brand owners. The offered item is original and new.
CCMT09T308-FM6 WSM20S FM6 Wendeplatten - Walter Tools
Take advantage of the combination of robust edge stability, tailored chip control and a proven Tiger·tec Silver coating for consistent performance in demanding stainless and high-temperature alloy machining; order genuine Walter Tools inserts via Metav Werkzeuge or consult their technical team for application support. CCMT09T308-FM6 WSM20S — CCMT indexable insert with Tiger·tec Silver coating by Walter Tools The CCMT09T308-FM6 WSM20S is an indexable turning and drilling insert engineered for secure chip formation and high thermal resistance in machining stainless steels and heat-resistant superalloys. Tiger·tec Silver coating for extended tool life Suited for stainless steels and superalloys Rhombic 80° CCMT form, 0.8 mm corner radius FM6 chipbreaker for controlled chips Consistent edge life under elevated temperatures The combination of the WSM20S grade and Tiger·tec Silver coating delivers a balance of wear resistance and thermal stability suited to tough-to-machine materials. The coated carbide substrate supports a stable cutting edge, which reduces flank wear under the high temperatures generated when machining stainless steels and heat‑resistant alloys. This translates into longer tool life and fewer indexings per component, improving process reliability and lowering tooling-related interruptions. Geometry that supports precision and accessibility The rhombic 80° CCMT form and 0.8 mm corner radius provide a versatile balance between strength and finishing capability. The 7° relief angle reduces rubbing and heat buildup at the cutting edge, helping to maintain dimensional consistency and surface finish across variable depths of cut. For turning and limited drilling or bore‑enlargement operations, this geometry enables predictable cutting forces and steady tool behaviour, which benefits repeatable part quality in batch and single‑piece production. Controlled chip formation to keep production moving An optimised FM6 chipbreaker design focuses on producing secure, segmented chips in materials that otherwise tend to form long, stringy swarf. Reliable chip control reduces the risk of entanglement, limits rework, and shortens machine downtime caused by chip‑related stoppages. The result is a smoother workflow on the shop floor and improved operator safety, supporting higher effective machining rates and reduced secondary cleaning. Straightforward integration into conventional toolholders The insert’s CCMT geometry and standard designation ensure compatibility with a wide range of indexable turning and drilling holders. As a coated carbide insert in the Tiger·tec Silver family, it can be stocked alongside other grades for mixed‑material production; this simplifies logistics and eases tool changeovers. For further technical clarification or tailored recommendations on tooling setups, Metav Werkzeuge’s consultants are available to advise on holder selection and cutting strategies. Contact Metav Werkzeuge today for application-focused advice and to secure genuine Walter Tools Tiger·tec Silver inserts for reliable machining of stainless steels and superalloys. Technical data Article number: CCMT09T308-FM6-WSM20S-WALTER Designation: CCMT09T308-FM6 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Corner radius: 0.8 mm Relief angle: 7° Plate size: 09 Plate thickness: T3 Plate form: Rhombus 80° Special features Chipbreaker: FM6 Grade: WSM20S (coated carbide) Material applicability: stainless steels (ISO group M), heat‑resistant superalloys/titanium (ISO group S) Suitable applications: turning, drilling and bore enlargement where specified geometry permits FAQ What materials is this insert designed for? The CCMT09T308-FM6 WSM20S insert is specified for stainless steels (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), benefitting from the Tiger·tec Silver coating and the WSM20S grade. How does the FM6 chipbreaker help in practice? The FM6 chipbreaker on the CCMT09T308-FM6 WSM20S generates secure, segmented chips, reducing the likelihood of long swarf and minimising machine interruptions during continuous turning or bore‑enlargement operations. Is the CCMT09T308-FM6 geometry compatible with standard toolholders? Yes, the CCMT form is a common indexable geometry and fits conventional turning and compatible drilling holders designed for CCMT inserts, simplifying retrofit and stock management. What surface finish can be expected with the 0.8 mm corner radius? A 0.8 mm corner radius offers a compromise between edge strength and finishing; it supports stable cutting for good surface integrity while maintaining sufficient robustness for moderate finishing passes. Does the Tiger·tec Silver coating improve process reliability? The Tiger·tec Silver coating enhances thermal stability and wear resistance, contributing to consistent edge life and predictable machining performance when processing stainless steels and superalloys. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT09T308-FM6 WSM30S FM6 Wendeplatten - Walter Tools
Combine high process security with the wear-resistant Tiger·tec Silver coating and precise geometry to ensure stable, productive machining of tough alloys and rostfreier Stahl; order the insert via Metav Werkzeuge or consult the technical advisors for application support. CCMT09T308-FM6 WSM30S Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte for rostfreier Stahl — Walter Tools, Tiger·tec Silver, 7° The CCMT09T308-FM6 WSM30S is an indexable insert engineered for drilling, boring and turning operations, optimised for rostfreie Stähle and heat‑resistant superalloys under demanding cutting conditions. Tiger·tec Silver coating for high edge life Optimised for rostfreier Stahl and superalloys Rhombus 80° form with 0.8 mm corner radius 7° relief angle for stable chip control Robust coating and grade for challenging materials The combination of the Tiger·tec Silver coating and the WSM30S grade provides a balance of heat resistance and edge stability that suits the machining of rostfreier Stahl and high‑temperature alloys. The coated cemented carbide construction supports secure chip formation and resists the adhesion and work‑hardening tendencies common with these materials. On a practical level, this means fewer interrupted cuts and longer intervals between insert changes, contributing to measurable improvements in uptime and process reliability. Geometry designed for repeatable surface and tool life The insert’s Rhombus 80° profile, together with a 0.8 mm corner radius and a 7° relief angle, delivers a geometry that maintains cutting edge integrity while providing favourable engagement angles for drilling and turning. The plate thickness code T3 and size 09 offer a compact yet stable platform that withstands radial and axial loads. These geometric choices translate into consistent cutting forces, improved surface finish and reduced risk of edge chipping when working with tougher alloys. Controlled chips and predictable performance Equipped with the FM6 chipbreaker, the insert is tuned to evacuate swarf efficiently across a range of feeds and depths of cut. The chip‑control system reduces the likelihood of built‑up edge and tangled chips, enhancing operator safety and machine cleanliness. In production terms, predictable chip formation allows for stable cycle times and fewer quality deviations, supporting higher overall productivity and lower scrap rates. Practical applications and machining advice This insert is intended for applications where material groups S (heat‑resistant superalloys, titanium) and M (rostfreie Stähle) are encountered. For mixed or unpredictable batches, the WSM30S grade provides a versatile option that minimises the need for frequent grade changes. As a coated indexable insert, it is compatible with common ISO toolholders for drilling and turning; selection of coolant strategy and cutting parameters should follow the material class and machine rigidity to fully exploit the insert’s wear resistance and chip‑forming features. Walter Tools’ quality standards support repeatable results in serial production. For robust, high‑temperature machining with proven chip control, request the Walter Tools CCMT09T308‑FM6 WSM30S inserts from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com for tailored process recommendations Technical data SKU: CCMT09T308-FM6-WSM30S-WALTER Name: CCMT09T308-FM6 WSM30S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Chipbreaker: FM6 Base designation: CCMT09T308-FM6 Facts Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 09 Thickness code: T3 Tolerance class: M Special features Coating technology: Tiger·tec Silver Material groups: S / M Suitable for: rostfreier Stahl, heat‑resistant superalloys Typical applications: drilling, boring, turning Built for: stable chip formation and extended edge life FAQ What materials is this insert suitable for? The CCMT09T308‑FM6 WSM30S insert is designed primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), exploiting the Tiger·tec Silver coating to handle high temperatures and tough cutting conditions. Which chipbreaker does the insert use and what benefit does it provide? The insert features the FM6 chipbreaker, which promotes predictable chip segmentation and evacuation, reducing the risk of built‑up edge and improving machining stability. How does the insert geometry affect performance in turning operations? The Rhombus 80° form, 0.8 mm corner radius and 7° relief angle ensure a favourable cutting engagement that balances edge strength with surface finish, supporting repeatable results in both finishing and semi‑finishing passes. Is this insert compatible with standard toolholders for drilling and turning? Yes, the insert’s ISO designation and T3 thickness code match common toolholder families used for indexable drilling and turning; correct clamping and toolholder rigidity are essential to obtain the full benefit of the grade. Can the insert be used interchangeably for titanium and rostfreier Stahl? The WSM30S grade targets both ISO groups S and M, offering versatility across titanium and rostfreier Stahl applications, but cutting data should be adapted for each material to account for differing thermal and mechanical behaviours. Manufacturer: Walter AG; Walter Tools brand; headquarters in Tübingen. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, brand‑new product from the manufacturer.
CCMT09T308-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of precise surface finish, reliable chip control and robust geometry to maintain productive turning operations; order through Metav Werkzeuge or consult the sales team for application matching. CCMT09T308-FP4 WEP10C turning/boring indexable insert by Walter Tools — Cermet grade for fine finishing and controlled chips CCMT09T308-FP4 WEP10C is an indexable turning/boring insert designed for finishing operations where surface quality and predictable chip formation are essential Walter Cermet WEP10C cermet grade Rhombic 80° plate form 7° clearance angle for stable cutting FP4 chipbreaker for predictable chip control High-precision finishing for consistent results The WEP10C cermet grade and the fine edge geometry deliver consistent surface quality with reduced tendency for built-up edge during finishing passes. Cermet materials combine ceramic hardness with metallic toughness, which results in a cutting edge able to sustain high temperatures and preserve form over long runs. This makes the insert particularly suitable for applications where surface integrity is measured and repeatability is required. The Walter Cermet series focuses on predictable wear behaviour, enabling planners to estimate tool life more reliably and to schedule fewer unscheduled tool changes. Predictable chip control and process stability The integrated FP4 chipbreaker and the 7° clearance work together to generate short, controllable chips that evacuate reliably across a range of cutting parameters. Controlled chip formation reduces the risk of rework and protects both the workpiece and the machine, supporting higher process uptime. The rhombic geometry provides a stable cutting edge while allowing effective chip flow; this stability translates into repeatable part dimensions and fewer in-process interruptions. For users evaluating cycle efficiency, the predictable chip behaviour contributes directly to improved overall process economy. Versatile geometry for precise turning and boring tasks The Rhombic 80° plate form with a 0.8 mm corner radius and T3 thickness combines access to recessed areas with a balance between edge strength and fine finishing capability. The insert’s form factor supports a range of turning and light boring operations where dimensional control matters. Material suitability should be checked against the detailed product matrix, as the grade is catalogue-dependent; the technical data present a clear basis for selecting feeds and speeds. Using this insert in the correct holder and clamping arrangement ensures rigid support, which is essential for achieving the surface finishes and dimensional tolerances expected from a cermet cutting grade. For application advice or to request a matching tooling recommendation based on Walter Tools’ WEP10C, contact Metav Werkzeuge for direct consultation and ordering support Technical data Article number: CCMT09T308-FP4-WEP10C-WALTER Designation: CCMT09T308-FP4 WEP10C Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Rhombic 80° Plate size: 09 Thickness: T3 Tolerance class: M Special features Chipbreaker: FP4 Grade: WEP10C (cermet) Series: Walter Cermet Execution: T Material information: catalogue-dependent FAQ What materials is the CCMT09T308-FP4 WEP10C suited for? Material suitability depends on the detailed product matrix; the CCMT09T308-FP4 WEP10C insert by Walter Tools (SKU CCMT09T308-FP4-WEP10C-WALTER) is a cermet grade designed primarily for finishing—check the matrix for specific alloys. Can the insert be used for both turning and light boring? Yes, the rhombic 80° form and T3 thickness make the insert suitable for turning and light boring operations where accessibility and edge strength are required. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker produces short, controllable chips, improving chip evacuation and reducing the likelihood of entanglement, which supports stable, uninterrupted machining with the Walter Tools WEP10C grade. What does the designation CCMT09T308-FP4 indicate? The designation encodes geometry and features: CCMT indicates the rhombic insert family and chip geometry, 09 is the size, T3 the thickness, 0.8 the corner radius, and FP4 denotes the chipbreaker; WEP10C identifies the cermet grade. Is special clamping or holder recommended for optimal performance? Rigid clamping and the correct toolholder for rhombic 80° inserts are recommended to exploit the cermet grade’s surface-finish capability and to maintain dimensional repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for identification and explanatory purposes only. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory-new product of the stated manufacturer.
CCMT09T308-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, the WKP01G grade and the rhombic 80° geometry ensures durable cutting edges and reliable chip control for machining steel and cast iron; order the CCMT09T308-FP4 WKP01G directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT09T308-FP4 WKP01G – Rhombic 80° drilling/turning indexable insert, Tiger·tec Gold (Walter Tools) The CCMT09T308-FP4 WKP01G is a rhombic 80° indexable insert engineered for productive turning and drilling-related applications in steel and cast iron, offering a balanced combination of wear resistance and consistent chip formation. Tiger·tec Gold coating for high wear resistance WKP01G grade optimised for steel and cast iron Rhombic 80° geometry for versatile turning operations Precise 0.8 mm corner radius for repeatable edge life Increase throughput with a wear-resistant coating The combination of the Tiger·tec Gold coating and the WKP01G carbide grade delivers a measurable increase in tool life and process stability. The advanced coating reduces abrasive wear and protects the cutting edge during high-temperature contact with workpiece materials, which translates into longer intervals between index changes and fewer interruptions on the shop floor. For production environments that prioritise cycle time and repeatability, this insert offers a clear efficiency advantage by maintaining a stable cutting edge under the thermal and mechanical loads typical of steel and cast-iron machining. Consistent chip control and reliable surface finish Designed with a rhombic 80° form and the FP4 chipbreaker, this insert enables controlled chip formation across a wide range of feeds and depths of cut. The 0.8 mm corner radius and 7° clearance angle combine to reduce vibration and support a dependable cutting geometry, which helps obtain consistent surface quality and dimensional accuracy. For operators less familiar with chipbreaker technology: the FP4 pattern actively segments chips and directs them away from the cutting zone, lowering the risk of built-up edge and improving overall machining safety. Broad material suitability and economical operation Rated for the ISO groups P and K, the insert is suitable for unalloyed and alloyed steel as well as cast iron, making it a versatile choice for mixed production jobs and job-shop environments. The standard T3 thickness and size 09 format ensure compatibility with common toolholders, simplifying tool management and reducing inventory complexity. By offering a stable edge life and simplified tool handling, this insert contributes to lower unit costs and predictable production output, supporting lean manufacturing objectives and easier planning for maintenance cycles. For tailored recommendations or to place an order for the CCMT09T308-FP4 WKP01G, contact Metav Werkzeuge for application support and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CCMT09T308-FP4-WKP01G-WALTER Designation: CCMT09T308-FP4 WKP01G Base designation: CCMT09T308-FP4 Numbers / core technical data Clearance angle: 7° Corner radius: 0.8 mm Thickness: T3 Insert size: 09 Tolerance class: M Versions / special features Coating: Tiger·tec Gold Grade: WKP01G Chipbreaker: FP4 Geometry: Rhombus 80° Applicable materials: Steel (P), Cast iron (K) Product type: Drilling/boring and turning indexable insert FAQ What materials is this insert suitable for? The CCMT09T308-FP4 WKP01G is specified for machining steel (ISO group P) and cast iron (ISO group K), reflecting the grade and coating combination optimised for those materials. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert enhances wear resistance and heat protection, which prolongs edge life and increases process stability in continuous turning operations. What is the function of the FP4 chipbreaker? The FP4 chipbreaker controls chip shape and evacuation, promoting safe chip segmentation and improved surface quality during turning and drilling-related tasks. Is the insert compatible with standard toolholders? Yes; the insert uses a common 09 size and T3 thickness, making it compatible with a wide range of standard toolholders for rhombic 80° inserts. How does the 0.8 mm corner radius affect cutting performance? The 0.8 mm radius offers a balance between robust edge strength and the ability to achieve consistent workpiece surface finish, helping to reduce vibration and extend edge life under moderate cutting forces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com