CNMG120412-RM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a proven combination of high wear resistance and stable chip control to keep machining schedules predictable; the insert’s robust geometry and Tiger‑tec Silver grade support productive turning of stainless and heat‑resistant alloys — order through Metav Werkzeuge for fast availability and expert application advice. Drehwendeschneidplatte CNMG120412-RM5 WSM20S — Tiger‑tec Silver insert by Walter Tools A robust CNMG turning insert designed for heavy and demanding cuts in stainless steels and heat‑resistant alloys, featuring the WSM20S grade and an RM5 chipbreaker for controlled chip formation CNMG geometry, Rhombus 80° Tiger‑tec Silver coating WSM20S Chipbreaker RM5 for stable chip control Negative rake 0° for heavy cuts Predictable performance in stainless and superalloys The combination of the Tiger‑tec Silver coating and the WSM20S grade has been engineered to resist thermal and mechanical wear when machining difficult materials. The insert is specified for the ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium), so the cutter grade is tailored to avoid built‑up edge and to maintain a stable cutting edge under elevated temperatures. This results in fewer tool changes and more consistent component quality, improving overall process efficiency and reducing unexpected downtime. Stable chip control and improved surface quality The RM5 chipbreaker promotes controlled chip segmentation, which supports secure evacuation of swarf and reduces the risk of chip interference. Combined with the Rhombus 80° CNMG geometry and a corner radius 1.2, the insert offers a balance between edge robustness and surface finish. The 0° negative rake increases toughness at the cutting edge, making this insert suitable for heavier cuts and interrupted machining while still enabling reliable workpiece surfaces and consistent dimensional results. Engineered for reproducible tool life and productivity Using a coated carbide grade designed for demanding applications means tool life becomes more predictable across batch sizes. The insert’s construction delivers a reliable cutting edge and optimised wear resistance, which supports higher machine utilisation and improved scrap rates. For production environments where cycle time and repeatability are critical, this turning insert helps to lower unit machining costs through longer life and fewer in‑process interventions. Simple integration and application guidance The CNMG form fits standard toolholders designed for rhombic 80° inserts and the plate dimensions simplify inventory management. The combination of chipbreaker RM5, the WSM20S grade and the insert’s geometry makes it appropriate for wet and dry turning strategies depending on the machine set‑up and workpiece material. Application parameters should be selected with regard to workpiece grade and rigidity; for tailored cutting data and feed/speed recommendations, technical consultation is advised to guarantee optimal results with minimal set‑up time. Contact Metav Werkzeuge for personalised cutting data and to confirm the best Walter Tools CNMG120412-RM5 WSM20S insert for the intended material and machining strategy Technical data Article number: CNMG120412-RM5-WSM20S-WALTER Label: Drehwendeschneidplatte CNMG120412-RM5 WSM20S Walter Tools Product type: Drehwendeschneidplatte (turning indexable insert) Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Core measurements Geometry: CNMG120412-RM5 Plate form: Rhombus 80° Corner radius: 1.2 Relief angle: 0° (negative) Plate size: 12 Plate thickness: 04 Tolerance class: M Materials & features Applicable groups: S / M Suitable for: stainless steel (M) Suitable for: heat‑resistant superalloys and titanium (S) Chipbreaker: RM5 Coating: Tiger‑tec Silver Material: coated carbide FAQ Which materials are recommended for this insert? The CNMG120412-RM5 WSM20S insert from Walter Tools is specified for ISO groups M and S, meaning it is suitable for stainless steels and heat‑resistant superalloys/titanium, where heat resistance and stable edge behaviour are required. How does the RM5 chipbreaker affect machining? The RM5 chipbreaker on this turning insert promotes predictable chip formation and safe evacuation, which improves surface quality and reduces the risk of chip entanglement, especially in long or discontinuous cuts. What advantages does the Tiger‑tec Silver WSM20S grade provide? The WSM20S grade combines a wear‑resistant coating with substrate toughness to improve edge stability at elevated temperatures, extending tool life when machining demanding materials. Is the insert suitable for heavy and interrupted cuts? Yes; the 0° negative rake and rhombic CNMG geometry increase edge strength, making the insert well suited to heavier feeds, interrupted cuts and applications where robustness is essential. Which holders and set‑ups are compatible? The geometry conforms to standard CNMG toolholder systems for 80° rhombic inserts; the plate thickness and size align with common turning toolholder designs to enable straightforward mounting and repeatable set‑up. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are used solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from the manufacturer.
CNMG120412-RM5 WSM30S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of high heat resistance, controlled chip formation and robust negative geometry to ensure consistent turning performance in challenging materials; order the insert directly via Metav Werkzeuge or consult our specialists for application support. CNMG120412-RM5 WSM30S — Turning insert (Rhombus 80°, Tiger·tec Silver) by Walter Tools The CNMG120412-RM5 WSM30S is a rhombic 80° turning insert engineered for machining stainless steels and heat‑resistant superalloys in demanding production environments. Tiger·tec Silver coating, high heat resistance Optimised RM5 chipformer for reliable chip control Rhombic 80° geometry for versatile turning applications Negative 0° relief with 1.2 mm corner radius Consistent performance where temperatures climb The Tiger·tec Silver grade delivers a coating architecture designed for thermal stability and reduced flank wear, which is particularly beneficial when machining heat‑sensitive grades. The WSM30S cutting grade is a coated carbide developed for difficult‑to‑machine alloys; this results in a more stable cutting edge and extended edge life under elevated cutting temperatures. By favouring thermal resistance over aggressive toughness, the insert helps to avoid rapid deterioration of the tool flank and supports predictable tool change intervals, improving overall process reliability. Controlled chips and fewer interruptions The integrated RM5 chipformer is engineered to break and evacuate chips consistently across a range of feeds and depths of cut. Controlled chip flow reduces the risk of entanglement, protects the workpiece surface and limits machine downtime caused by chip interference. The insert’s negative 0° relief increases edge strength for interrupted cuts and heavy engagement, so tool failure is less likely in unstable cutting conditions. As a result, cycle times are maintained and throughput becomes more predictable. Geometry that balances versatility and security A rhombic 80° shape offers a broad contact balance suitable for both finishing and semi‑roughing passes. The 1.2 mm corner radius provides a compromise between edge strength and surface finish; small enough to achieve reasonable surface quality, yet large enough to resist chipping during heavier cuts. The geometry nomenclature and thickness designation are optimised for turners who require a reliable entry and exit behaviour while maintaining the stability of the cutting edge throughout the operation. Tailored for stainless steels and superalloys Specified for material groups S / M (heat‑resistant superalloys and stainless steels), this insert supports applications where poor thermal conductivity and work‑hardening are common challenges. The grade and chipbreaker combination helps to prevent built‑up edge and encourages stable chip segmentation, which is essential when machining alloys that generate continuous, stringy chips. Where surface integrity and repeatable component quality are priorities, the material compatibility of this insert delivers consistent, measurable benefits. Contact Metav Werkzeuge for detailed application advice and availability of the Walter Tools CNMG120412-RM5 WSM30S turning insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMG120412-RM5-WSM30S-WALTER Article designation: CNMG120412-RM5 WSM30S Product type: Turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Facts Size designation: 12 Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness designation: 04 Insert shape: Rhombus 80° Chipformer: RM5 Tolerance class: M Special features Coating: Tiger·tec Silver Grade composition: Coated carbide Material compatibility: S / M Suitable for stainless steels: yes Suitable for heat‑resistant superalloys: yes Execution: G FAQ Which materials is the insert suitable for? The CNMG120412-RM5 WSM30S is designed for stainless steels (M) and heat‑resistant superalloys / titanium‑based materials (S) according to its S / M designation. What role does the RM5 chipformer play? The RM5 chipformer on the CNMG120412-RM5 WSM30S promotes controlled chip breaking and evacuation, reducing the risk of chip entanglement and protecting surface quality. How does the Tiger·tec Silver coating help in production? Tiger·tec Silver on this insert increases thermal resistance and reduces flank wear, which supports longer tool life and greater process stability in high‑temperature cutting. Is the geometry suitable for interrupted cuts? Yes; the negative 0° relief and 1.2 mm corner radius provide enhanced edge strength for interrupted and heavy cuts, improving reliability in demanding operations. Can this insert be used for finishing as well as roughing? The rhombic 80° geometry and moderate corner radius make the CNMG120412-RM5 WSM30S versatile for both semi‑roughing and finishing passes, depending on machine stability and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for clarification purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
CNMG120412-RP5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK10S grade for reliable, wear‑resistant performance in cast‑iron turning; the insert’s RP5 chipbreaker and rhombic 80° geometry ensure controlled chips and stable process results. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CNMG120412-RP5 WKK10S Drehwendeschneidplatte — Tiger·tec Silver grade, for cast iron A CNMG120412-RP5 WKK10S indexable turning insert designed for efficient, predictable machining of cast iron components in production environments Tiger·tec Silver coating for long tool life Optimised for cast iron machining (ISO K) RP5 chipbreaker for controlled chip formation Rhombic 80° geometry with 1.2 mm corner radius Consistent wear resistance for productive machining The combination of the Tiger·tec Silver coating and the WKK10S grade provides a robust solution for abrasive cast‑iron applications. The coated carbide construction reduces flank and crater wear, extending edge life and enabling longer uninterrupted cutting cycles. This translates directly to higher machine utilisation and lower tool‑change frequency, supporting more economical series production. The result is repeatable performance and reduced process variability when machining components from ISO‑classified cast iron. Geometry and chip control that stabilise the cutting process The rhombic 80° shape together with the RP5 chipbreaker is tuned for the short, brittle chips typical of cast iron. The 1.2 mm corner radius increases edge strength without compromising accessibility in many turning operations, while the 0° (negative) clearance supports robust cutting under interrupted or heavy cuts. Together these features produce controlled chip formation, improved surface quality and a lower risk of tool or workpiece damage, which enhances process security on automated lathes and production lines. Practical process benefits and handling advantages As a standard CNMG insert, this grade fits common toolholders and indexable systems, simplifying stockkeeping and re‑tooling. The insert’s design focuses on stable cutting and predictable wear behaviour, helping to maintain component tolerances across batches. Fewer regrinds and predictable edge life support planning for consumables and reduce unexpected downtime. For customers seeking to optimise throughput in cast‑iron turning, the insert brings a balance of durability, chip control and geometric flexibility that supports both roughing and semi‑finishing tasks. Contact Metav Werkzeuge today to discuss how the CNMG120412-RP5 WKK10S insert suits specific cast‑iron applications or to request a tailored quotation from Metav Werkzeuge. Technical Data Article number: CNMG120412-RP5-WKK10S-WALTER Designation: CNMG120412-RP5 WKK10S Series: Tiger‑tec Silver Grade: WKK10S Core technical data Plate form: Rhombus 80° Inscribed circle / size: 12 Thickness code: 04 Corner radius: 1.2 mm Clearance angle: 0° (negative) Chipbreaker: RP5 Execution / finish: G Tolerance class: M Special features and applications Coating: Tiger·tec Silver Material base: coated carbide Suitable for: cast iron (ISO K) Optimised for abrasive wear in cast components Short, controlled chip formation with RP5 Designed for productive turning and stable edge life FAQ Which materials are recommended for this insert? The CNMG120412-RP5 WKK10S insert is optimised for cast iron (ISO K); the WKK10S grade and Tiger·tec Silver coating are balanced for abrasive wear and short, breaking chips typical of these materials. What does the RP5 chipbreaker achieve in practice? The RP5 chipbreaker promotes short, controllable chips and consistent chip evacuation when using the CNMG120412-RP5 WKK10S, improving surface finish and reducing the risk of chip entanglement in turning operations. How does the 80° rhombic geometry benefit turning operations? The rhombic 80° geometry provides good cutting edge engagement and flexibility for various turning tasks; when paired with the 1.2 mm corner radius, it increases edge strength for heavy cuts while retaining contour access. Is the insert compatible with standard CNMG toolholders? Yes, the insert follows the CNMG geometry and fits conventional CNMG toolholders, enabling straightforward integration into existing tooling systems for production environments. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120412-RP5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of a wear-resistant Tiger·tec Silver grade and a precise RP5 chipbreaker for consistent performance in cast-iron turning; efficient machining and reliable edge life support productive series work. Order the insert directly via Metav Werkzeuge or consult the Metav team for application matching and stock information. CNMG120412-RP5 WKK20S — turning insert, Tiger·tec Silver, for cast iron | Walter Tools The CNMG120412-RP5 WKK20S is a rhombic 80° turning indexable insert designed for robust, repeatable machining of cast iron components in series production. Tiger·tec Silver coating technology Optimised for abrasive cast-iron wear Rhombic 80° geometry, 1.2 corner radius Consistent productivity thanks to the Tiger·tec Silver grade The Tiger·tec Silver coating and the WKK20S grade are engineered for cast iron machining, addressing the high abrasive wear and frequently short, breaking chips typical of these materials. The coated carbide composition provides a balance between wear resistance and toughness, which reduces unexpected tool changes and stabilises cycle times in batch production. The RP5 chipbreaker supports predictable chip formation, lowering the risk of built-up edge and improving process reliability during continuous operation. Geometry and chip control that support dimensional accuracy The rhombic 80° insert shape with a 1.2 mm corner radius and a 0° (negative) relief angle delivers robust cutting performance and stable cut entry. This geometry helps maintain consistent radial support and reduces vibration in interrupted cuts, which preserves surface finish quality and repeatability on turned components. The RP5 chipbreaker is optimised to break chips reliably when machining grey and nodular cast irons, enabling safer chip evacuation and fewer manual interventions at the machine. Designed for long, predictable edge life under abrasive conditions The WKK20S grade is formulated to withstand abrasive wear commonly encountered with cast-iron workpieces; the coating technology lowers flank and crater wear while retaining a resilient cutting edge. In continuous or high-volume turning, the combination of coated carbide and the insert’s negative rake provides an advantageous wear profile, meaning fewer indexings and more consistent component tolerances across a batch. This contributes to lower overall process costs and higher machine uptime. Integration and handling in the workshop The insert’s ISO designation and standard CNMG form make it compatible with a wide range of clamping systems and toolholders that accept rhombic 80° cartridges. The CNMG120412-RP5 WKK20S insert is a suitable choice where stable chip control, abrasion resistance and predictable edge life are priorities. For new setups, trial cuts at recommended feeds and speeds for cast iron are advised to confirm optimal parameters; the insert’s structural robustness allows for modest adjustments without rapid wear escalation. Contact Metav Werkzeuge for application advice and fast availability of Walter Tools inserts; refer to CNMG120412-RP5 WKK20S for precise order and process support. Technical data Article number: CNMG120412-RP5-WKK20S-WALTER ISO designation: CNMG120412-RP5 WKK20S Series: Tiger·tec Silver Manufacturer: Walter Tools Core specifications Insert size: 12 Thickness code: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Materials & special features Grade/sort: WKK20S (coated carbide) Chipbreaker: RP5 Plate form: Rhombus 80° Material application: cast iron FAQ Is this insert suitable for machining cast iron? Yes. The CNMG120412-RP5 WKK20S from Walter Tools is specifically formulated for cast-iron machining, with a coated carbide grade and RP5 chipbreaker optimised for abrasive cast-iron chips. What does Tiger·tec Silver mean for performance? Tiger·tec Silver denotes a coated carbide technology that enhances wear resistance and thermal stability; in the CNMG120412-RP5 WKK20S this results in longer edge life and more consistent cutting performance on abrasive materials. Can this insert be used in standard CNMG toolholders? The insert follows the CNMG ISO form and fits toolholders designed for rhombic 80° CNMG inserts; compatibility should be confirmed against the specific holder and clamping system. How does the RP5 chipbreaker affect chip control? The RP5 chipbreaker is tuned for reliable chip segmentation when turning cast iron, promoting safer chip evacuation and reducing the likelihood of entangling or continuous swarf. What edge life benefits can be expected in series production? The coated WKK20S grade combined with the negative relief geometry supports predictable wear progression, which helps extend intervals between indexing and maintain component tolerances in repeated batches. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand-new goods from the manufacturer.
CNMG120412-RP5 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life from Tiger·tec Gold and stable chip control from the RP5 chipbreaker to keep turning operations productive and predictable; order the CNMG120412-RP5 WPP05G directly via Metav Werkzeuge or consult our specialists for machining recommendations. CNMG120412-RP5 WPP05G indexable turning insert — Tiger·tec Gold, for steel | Walter Tools The CNMG120412-RP5 WPP05G is an indexable turning insert optimised for steel machining, featuring a Tiger·tec Gold coated, rhombic 80° geometry and RP5 chip control for consistent performance. Tiger·tec Gold coated for extended tool life WPP05G: optimised for steel machining RP5 chipbreaker for stable chip control Rhombic 80° shape with 1.2 mm nose radius Efficient turning of carbon and alloy steels with predictable tool life The Tiger·tec Gold technology delivers a coated carbide substrate that balances wear resistance and toughness, so the insert withstands heat and abrasion typical of steel turning. Combined with the WPP05G grade, this insert is designed for a broad range of steel applications under the ISO P group. The result is longer tool life and fewer indexings, which reduces machine downtime and contributes directly to a more efficient production flow. Consistent chip control and improved surface quality With the RP5 chipbreaker, chip formation is stabilised across common feed ranges for turning steels, reducing the likelihood of snarled or stringy chips. Stable chip evacuation protects the workpiece and tool, leading to more consistent surface finish and lower scrap rates. The rhombic 80° shape supports versatile approach angles, while the 1.2 mm nose radius helps achieve the required contour accuracy without sacrificing productivity. Practical compatibility and mounting considerations The insert is supplied in the CNMG form factor suitable for standard toolholders that accept rhombic 80° inserts. The negative 0° rake (0° negative) offers robustness in interrupted cuts and tougher steel grades, making the grade appropriate for both finishing and medium-duty roughing tasks. When integrating the insert into existing tool systems, select a toolholder that secures the CNMG geometry and use recommended cutting parameters for steel to exploit the coating and chipbreaker benefits. Balanced performance for varied steel grades and stable processes WPP05G is characterised by a focus on steel machining, offering a compromise between hardness and toughness that supports both wear resistance and edge stability. This balance makes the insert suitable for a wide spectrum of steels encountered in general engineering and production environments. The combination of coated carbide and optimised chip geometry aims to deliver repeatable results, so component tolerances and surface standards are met consistently under routine shop conditions. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and to arrange product supply or machining parameter support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMG120412-RP5-WPP05G-WALTER Designation: CNMG120412-RP5 WPP05G Type: Indexable turning insert Series/Coating: Tiger·tec Gold Grade: WPP05G Brand: Walter Tools Core data Shape angle: Rhombic 80° Insert size: 12 mm Thickness: 4 mm Nose radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Chipbreaker: RP5 Materials & special features Substrate: Coated carbide Suitable for: Steel (ISO P) Application: General turning — finishing to medium roughing Execution: G Balanced wear resistance and toughness for steel machining FAQ What steels is this insert suitable for? The CNMG120412-RP5 WPP05G insert and its Tiger·tec Gold coating are designed for ISO P materials, making it suitable for unalloyed and alloyed steels commonly used in general engineering. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on this Walter Tools insert controls chip formation for more stable evacuation, which improves surface finish and reduces the risk of chip-related interruptions. Can this insert be used for interrupted cuts? Yes, the negative 0° rake and robust coated-carbide substrate provide the strength required for interrupted cuts, offering greater process security during unstable engagement conditions. Which toolholder geometry is required for this insert? A standard toolholder compatible with CNMG-shaped, rhombic 80° inserts is required; ensure correct seating and clamping to achieve the specified accuracy and chip control. How does Tiger·tec Gold benefit productivity? Tiger·tec Gold coating enhances wear resistance and thermal stability, which extends edge life and helps maintain consistent cutting performance across series production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG120412-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Order via Metav Werkzeuge to benefit from the combination of high process reliability, targeted chip control and a coating designed for extended tool life; the Tiger·tec Gold grade and RP5 chipbreaker deliver efficient steel machining and predictable performance for series production. CNMG120412-RP5 WPP10G Turning insert — Tiger·tec Gold grade for steel, Walter Tools A CNMG120412-RP5 WPP10G indexable turning insert engineered for reliable steel machining with RP5 chip control and robust 80° rhombic geometry Tiger·tec Gold coated carbide WPP10G RP5 chipbreaker for consistent chip control Rhombic 80° CNMG geometry for stable turning 1.2 mm corner radius for enhanced edge strength Increased productivity through optimised coating and chip control The combination of Tiger·tec Gold coating and the RP5 chipbreaker focuses on reducing tooling downtime and stabilising the cutting process when machining steels. The coating technology improves wear resistance under the thermal and mechanical loads typical of steel turning, while the chip geometry promotes predictable fragmentation and evacuation. This results in higher average metal removal rates and fewer interrupted cycles, supporting tighter production schedules and lower scrap rates. Geometry tailored for heavy cutting and stable tool life The CNMG rhombic 80° form combined with a 0° (negative) relief and a 1.2 mm nose radius provides mechanical strength at the cutting edge and rigidity in interrupted cuts. The geometry reduces edge chipping and offers improved support for deeper cuts, translating into consistent surface quality and repeatable dimensional control. Robust insert geometry is particularly advantageous in batch machining or when facing variable workpiece conditions. Versatile WPP10G grade optimised for steels (ISO P) The WPP10G grade is a coated carbide developed for the ISO P material group, emphasising a balance between wear resistance and toughness. Classified for steel machining, the grade covers applications from wear‑resistant to more universal and tougher steel types, ensuring flexible use across a production line. The designation underlines suitability for typical heat generation and chip formation encountered when turning unalloyed and alloyed steels. Practical integration and workshop benefits With standard CNMG dimensions and a compact profile, the insert fits common toolholders and tool systems designed for rhombic 80° inserts; tolerance class M supports interchangeability and repeatable positioning. The compact thickness code and nominal size facilitate inventory management and replacement cycles in production environments. The insert’s features reduce rework and support operational planning by delivering stable cutting conditions and predictable insert life for series production. Contact Metav Werkzeuge for tailored cutting data and availability—specify the intended steel grade and machining parameters via info@metav-werkzeuge.com or +49 2822 7131930 to receive application support Technical data Article number: CNMG120412-RP5-WPP10G-WALTER Name: Drehwendeschneidplatte CNMG120412-RP5 WPP10G Walter Tools Numbers / Core technical data Plate size: 12 Plate thickness: 04 Corner radius: 1.2 mm Relief angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Special features / Versions Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RP5 Material group suitability: Steel (ISO P) Series: Tiger‑tec Gold Shape designation: CNMG120412-RP5 FAQ What materials is this insert suitable for? The CNMG120412-RP5 WPP10G insert is specified for the ISO P group and is suitable for machining a wide range of steels. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP10G grade enhances wear resistance and thermal stability, extending tool life during steel turning operations. How does the RP5 chipbreaker affect performance? The RP5 chipbreaker promotes controlled chip formation and evacuation, improving process stability and surface finish when turning steels. Is the geometry suitable for interrupted cuts and heavy roughing? Yes; the CNMG rhombic 80° form with a 1.2 mm corner radius and negative relief offers mechanical strength for interrupted cuts and robust roughing passes. Which tolerance class does the insert follow and why is that important? The insert is supplied in tolerance class M, ensuring consistent fit and repeatable positioning in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer; Walter Tools is referenced where applicable.
CNMG120412-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP20G grade and the RP5 chipbreaker for productive, reliable turning of steel; order the insert directly via Metav Werkzeuge or consult our application specialists for machining recommendations. CNMG120412-RP5 WPP20G indexable turning insert — Tiger·tec Gold coated, for steel — Walter Tools A CNMG120412-RP5 WPP20G indexable turning insert designed for stable, high-productivity steel turning with a controlled-chip RP5 geometry and a robust 1.2 mm corner radius. Tiger·tec Gold coated for longer tool life RP5 chipbreaker for controlled chip formation Negative 0° geometry for stable heavy cuts 1.2 mm corner radius for robust edge strength Increased productivity for steel turning operations The combination of a Tiger·tec Gold coating and the WPP20G carbide grade is engineered to extend cutting-edge life while maintaining consistent performance on steels (ISO group P). The advanced coating reduces flank wear and helps to preserve cutting-edge geometry under heat and load, which translates into fewer index changes and higher component throughput. Designed for applications where cycle time and repeatability matter, this insert supports sustained, efficient machining and predictable tool-change intervals. Predictable chip control and dependable cutting stability The integrated RP5 chipbreaker and the negative 0° geometry deliver controlled chip formation and high process stability when facing interrupted cuts or heavy-depth turning. The 1.2 mm corner radius strengthens the cutting edge against mechanical and thermal shock, improving resistance to chipping and enabling reliable roughing cycles. With a rhombic 80° shape and tolerance class M, this insert provides a balance between accessibility to profiles and consistent seating in compatible toolholders. Ease of selection and practical application advice Available in size 12 with thickness designation 04, this insert addresses a broad range of general steel machining tasks and suits standard turning toolholders designed for CNMG-style inserts. The WPP20G grade targets steel workpieces with typical heat and chip behaviours and is a universal choice for many shop-floor conditions. For specific cutting parameters, holder compatibility or optimisation for particular steels, Metav Werkzeuge’s technical consultants can provide tailored recommendations to maximise tool life and surface quality. Contact Metav Werkzeuge today for tailored machining advice and to arrange supply of Walter Tools CNMG120412-RP5 WPP20G inserts — reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: CNMG120412-RP5-WPP20G-WALTER Designation: CNMG120412-RP5 WPP20G Manufacturer: Walter Tools Dimensions & tolerances Insert size: 12 Corner radius: 1.2 mm Thickness: 04 Clearance angle: 0° (negative) Tolerance class: M Features & applications Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP5 Shape: Rhombus 80° Material application: Steel (P) Execution: G Substrate: Coated carbide FAQ What materials is this insert suited for? The CNMG120412-RP5 WPP20G insert is formulated for machining steels (ISO group P) and the WPP20G grade is optimised for typical steel heat and chip formation. How does the RP5 chipbreaker affect performance? The RP5 chipbreaker on the Walter Tools insert produces short, controllable chips for safer swarf handling and consistent surface finish while supporting robust metal removal rates. Is the insert suitable for heavy roughing cuts? Yes; the negative 0° geometry combined with the 1.2 mm corner radius gives enhanced edge strength and stability for heavy or interrupted cuts in steel. Which toolholders are compatible with CNMG120412-RP5 inserts? Standard toolholders for CNMG-shaped indexable inserts are compatible; ensure the pocket and clamping match the rhombic 80° geometry and tolerance class M for secure seating. Can Metav Werkzeuge advise on cutting parameters? Metav Werkzeuge provides application support and can recommend cutting speeds, feeds and depths tailored to the workpiece material and machining strategy for best results with this Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120412-RP5 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the RP5 chipbreaker to secure high wear resistance and reliable chip control in Stahl turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG120412-RP5 WPP30G turning insert for Stahl machining — Walter Tools, Tiger‑tec Gold, Rhombus 80° CNMG120412-RP5 WPP30G is a rhombic turning insert optimised for Stahl machining, combining a coated carbide grade from the Tiger‑tec Gold family with a robust RP5 chipbreaker for consistent metal removal. CNMG120412-RP5 WPP30G by Walter Tools Tiger‑tec Gold coated carbide for high wear resistance RP5 chipbreaker for reliable chip control Rhombus 80° form with 1.2 mm corner radius Increased process reliability through premium coating and grade The combination of the Tiger‑tec Gold coating and the WPP30G carbide grade delivers measurable improvements in tool life and edge stability when machining Stahl. The multilayer coating reduces flank wear and enhances thermal resistance, which supports higher cutting speeds and longer uninterrupted cycles. For production environments where predictable performance matters, this grade provides a clear reduction in tool changes and downtime, contributing to lower unit costs and steadier throughput. Geometry and chip control that protect the cutting edge With a Rhombus 80° shape, a 1.2 mm corner radius and a 0° (negative) rake, the insert offers a balance between edge strength and form accuracy. The RP5 chipbreaker is tuned for stable chip formation on typical Stahl grades, reducing the risk of built-up edge and improving surface finish. These geometric choices mean fewer reworks and consistent dimensional results, particularly on medium to heavy turning tasks where edge robustness is essential. Versatile application range for efficient production Designed for the ISO P material group, the insert is suitable for a wide spectrum of Stahl workpieces — from wear-resistant to tougher variants — enabling a single grade to cover multiple shop demands. The WPP30G composition lends itself to applications where a compromise between wear resistance and toughness is required, allowing process engineers to standardise tooling across mixed production runs and so simplify inventory management while maintaining productivity. Practical handling and integration into existing tool systems The CNMG120412-RP5 format, with an inscribed size of 12 and a plate thickness class of 04, fits common toolholders for indexable turning inserts, making changeover straightforward. The tolerance class M supports repeatable clamping and positional accuracy, which aids in achieving consistent part quality batch after batch. Specifying this insert in the tool setup improves predictability in cycle planning and reduces setup time for series production. Contact Metav Werkzeuge today to discuss Walter Tools Tiger‑tec Gold inserts and secure process‑stable turning solutions for Stahl machining. Technical details Article number: CNMG120412-RP5-WPP30G-WALTER Label: Drehwendeschneidplatte CNMG120412-RP5 WPP30G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger‑tec Gold Grade: WPP30G Numbers / Core technical data Corner radius: 1.2 mm Plate size: 12 Plate thickness: 04 Rake angle: 0° (negative) Tolerance class: M Designs / Special features Plate form: Rhombus 80° Chipbreaker: RP5 Coating technology: Tiger‑tec Gold Material application: Stahl FAQ What materials is this insert designed for? The CNMG120412-RP5 WPP30G insert is optimised for Stahl (ISO P) materials and is intended for a range of unalloyed and alloyed steel applications. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WPP30G grade increases thermal and wear resistance, which extends tool life and allows for higher cutting parameters with the CNMG120412-RP5 insert. What advantages does the RP5 chipbreaker provide? The RP5 chipbreaker ensures stable chip formation on Stahl, improves surface finish and protects the cutting edge from built‑up edge, enhancing process reliability with the Walter Tools insert. Is the insert suitable for heavy interrupted cuts? Thanks to the Rhombus 80° geometry and a 1.2 mm corner radius, the CNMG120412-RP5 WPP30G offers robust edge strength that is beneficial for interrupted and semi‑heavy turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation and identification only. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
CNMG120412-RP7 WKP30S Wendeplatten - Walter Tools
Take advantage of proven Tiger‑tec Silver performance and the RP7 chipbreaker to increase uptime and surface quality in turning operations; order directly via Metav Werkzeuge or contact the advisers for application-specific recommendations. CNMG120412-RP7 WKP30S turning indexable insert — for steel & cast iron, Tiger‑tec Silver, Walter Tools The CNMG120412-RP7 WKP30S is a rhombic 80° indexable turning insert with a 0° negative rake, designed for productive machining of steel and cast iron in demanding production environments. Tiger‑tec Silver coating for extended tool life WKP30S grade for steel and cast iron machining RP7 chipbreaker for consistent chip control 80° rhombic form with 1.2 mm corner radius Reliable cutting performance from a modern coated grade The WKP30S grade, applied within the Tiger‑tec Silver family, is a coated carbide designed for stable cutting in mixed production runs. Its composition balances wear resistance and toughness, which results in extended tool life and fewer unplanned tool changes. For industrial turning where cycle time and repeatability matter, this grade reduces the impact of abrasive wear typical when machining steel and cast iron, so stand‑by time for reconditioning is lowered and spindle utilisation is optimised. Predictable chip formation and consistent surface quality The combination of the RP7 chipbreaker, 0° negative rake, and 80° rhombic geometry produces controlled chip flow and stable cutting forces. The 1.2 mm corner radius increases edge strength and helps achieve repeatable surface finish without compromising component tolerances. In practical terms, chip control is improved over a wider range of feeds and depths, reducing interruptions for chip removal and lowering the risk of built‑up edge or vibration‑induced marks on turned parts. Easy integration and cost‑effective productivity Produced to M tolerance class and the CNMG ISO form, the insert is compatible with standard clamping systems and indexable toolholders, enabling quick interchange and consistent set‑up. The design supports efficient machining strategies: fewer tool changes, stable process windows and predictable tool‑life curves translate into measurable savings in operator time and machine availability. The CNMG120412-RP7 WKP30S is particularly suited to batch turning where reliability and surface quality are prioritised. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts — specify CNMG120412-RP7 WKP30S and discuss recommended cutting parameters at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CNMG120412-RP7-WKP30S-WALTER Designation: CNMG120412-RP7 WKP30S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP30S Substrate/coating: coated carbide (Tiger‑tec Silver) Facts Shape: Rhombus 80° Rake angle: 0° negative Corner radius: 1.2 mm Size: 12 (CNMG 12) Thickness: 4 mm Chipbreaker: RP7 Tolerance class: M Special features Suitable for steel (P group) Suitable for cast iron (K group) Coated carbide grade for mixed applications Robust edge for productive turning ISO CNMG form for standard toolholders FAQ What materials is this insert suitable for? The CNMG120412-RP7 WKP30S from Walter Tools is formulated for machining steel (ISO group P) and cast iron (ISO group K), offering a balance of wear resistance and toughness for these materials. How does the RP7 chipbreaker benefit production? The RP7 chipbreaker on this insert promotes predictable chip formation and evacuation, which improves process stability and reduces interruptions on production lathes. What is the effect of the 1.2 mm corner radius? A 1.2 mm corner radius provides increased edge strength for heavier cuts while helping to maintain a consistent surface finish and dimensional stability on turned parts. Is the insert compatible with standard toolholders? Yes, the insert follows the CNMG ISO form and M tolerance class, enabling straightforward integration into common indexable turning systems. Can this insert be used for high‑speed cutting? The Tiger‑tec Silver coating combined with the WKP30S grade is optimised for productive cutting regimes; suitability for high‑speed cutting depends on the specific machine and process parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only and do not imply any affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
CNMG120412-RP7 WPP05G WPP05G Wendeplatten - Walter Tools
Take advantage of high wear resistance, reliable chip control and the Tiger·tec Gold grade for efficient steel turning; order the insert directly via Metav Werkzeuge or contact our consultants for cutting data and application advice. CNMG120412-RP7 WPP05G turning insert — Walter Tools, rhombic 80° with RP7 chipbreaker and 0° negative rake CNMG120412-RP7 WPP05G is a coated carbide turning insert designed for steel machining with a rhombic 80° geometry, offering secure chip control and consistent performance in serial turning applications Tiger·tec Gold coated carbide grade WPP05G Optimised RP7 chipbreaker for steel machining 0° negative rake for secure chip flow control Rhombic 80° insert with 1.2 mm corner radius Proven productivity and extended tool life through modern coating technology The combination of the Tiger·tec Gold coating and the WPP05G grade provides a robust, coated carbide structure that resists flank wear and thermal degradation during continuous turning of steels. This results in longer tool life and fewer insert changes, which directly reduces machine idle time and contributes to a more predictable production rhythm. The coating technology is specifically engineered to maintain a stable cutting edge at elevated temperatures, delivering measurable process economy in medium to high-volume turning. Stable cutting performance and process security with RP7 chip control The RP7 chipbreaker geometry is optimised for chip formation when machining steels, promoting short, controllable chips and reliable evacuation even under interrupted cuts. Combined with the 0° negative rake, this insert favours secure cutting forces and dimensional stability, particularly where robust engagement and edge strength are required. For process planners, this means improved repeatability and a lower risk of edge chipping in demanding turning cycles, supporting consistent part quality. Geometry and dimensions that support versatile turning operations A rhombic 80° shape with a 1.2 mm corner radius offers a practical balance between edge strength and surface finish capability. The insert’s size designation and thickness code ensure compatibility with standard toolholders designed for CNMG-style inserts, while the tolerance class M supports precise seating and repeatable positioning. These geometric features translate into reduced setup variation and reliable toolholder compatibility across a range of lathes and turning applications. Application guidance and material suitability for steel machining This grade is developed for ISO group P materials, making it particularly suited to unalloyed and alloyed steel grades where typical chip formation and heat generation occur. The insert supports a spectrum of operation modes, from stable finishing to more aggressive semi-finishing cuts, depending on chosen cutting parameters. For optimal results, pairing the insert with appropriate cutting speeds, feeds and coolant strategies helps exploit the Tiger·tec Gold advantages: improved wear resistance and better edge stability for repeatable, economical machining. Contact Metav Werkzeuge to discuss cutting parameters and secure Walter Tools inserts for high-productivity steel turning; our team will advise on optimal chipbreaker and grade selection and provide immediate order support. Technical data Article number: CNMG120412-RP7-WPP05G-WALTER Designation: CNMG120412-RP7 WPP05G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP05G Shape: Rhombus 80° Chipbreaker: RP7 Free rake angle: 0° (negative) Facts Size: 12 Corner radius: 1.2 mm Thickness code: 04 Tolerance class: M Special features Coated carbide grade WPP05G (Tiger·tec Gold) Suited for ISO group P (steel) Robust cutting edge for interrupted cuts Optimised chip formation for steel turning FAQ What materials is this insert recommended for? The CNMG120412-RP7 WPP05G insert is recommended for ISO group P materials, specifically unalloyed and alloyed steel, where its Tiger·tec Gold coating and RP7 chipbreaker ensure consistent chip control. How does the 0° negative rake affect machining? A 0° negative rake increases edge strength and stability; with the WPP05G grade this promotes secure cutting conditions and reliable dimensional control in tougher turning operations. Which chip form can be expected with the RP7 breaker? The RP7 chipbreaker is engineered to produce short, controllable chips when machining steel, improving evacuation and reducing the chance of entanglement. Is the insert compatible with standard CNMG toolholders? Yes, the rhombic 80° CNMG format and the insert’s size code match conventional CNMG toolholders, allowing straightforward integration into existing turning setups. Can this insert be used for finishing and semi-finishing? The grade and geometry support both finishing and semi-finishing operations in steel, depending on cutting speed and feed selection to balance surface finish and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120412-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the RP7 chipbreaker to extend tool life and ensure reliable chip control in steel turning operations; order directly via Metav Werkzeuge or contact our consultants for process optimisation. CNMG120412-RP7 WPP10G turning insert (Rhombic 80°, 1.2 mm radius) by Walter Tools for steel CNMG120412-RP7 WPP10G is a coated indexable insert designed for versatile turning of steel components, combining robust geometry with Walter Tools’ Tiger·tec Gold coating to support productive metalcutting. Tiger·tec Gold coating for extended tool life RP7 chipbreaker for reliable chip control Rhombic 80° geometry for versatile turning Negative 0° rake with 1.2 mm corner radius Consistent wear protection for longer production runs The Tiger·tec Gold technology in this insert provides a high-performance, coated carbide substrate that improves thermal stability and wear resistance under the temperatures typical when machining steel (ISO P). This results in fewer tool changes and a steadier machining process, which in turn contributes to predictable cycle times and lower per-part tooling costs. The combination of substrate and coating is engineered to balance toughness and hardness, enabling the insert to withstand interrupted cuts and maintain a stable cutting edge over extended periods. Predictable chip formation and surface quality The RP7 chipbreaker is developed to control chips reliably across a range of feeds and depths of cut, reducing the risk of built-up edge and minimising rework. Controlled chip evacuation leads to improved process security and a more consistent surface finish on turned parts. For operations where repeatability matters — such as batch production or precision shafts — the predictable behaviour of this chipbreaker helps to reduce cycle variability and supports tighter tolerances. Robust geometry for flexible machining strategies The rhombic 80° shape with 0° rake and a 1.2 mm corner radius offers a versatile balance between edge strength and accessibility for side and face turning. The insert dimensions (designation CNMG120412-RP7) provide a stable mounting and a larger effective cutting edge, which is beneficial when taking heavier cuts or when minor tool deflection must be avoided. The negative rake geometry enhances the insert’s resistance to edge chipping under load, making it suitable for a wide range of steel grades from general-purpose to tougher, more abrasive steels. Application benefits and production efficiency Designed specifically for machining steel, the WPP10G grade targets high process reliability and broad material coverage within ISO group P. The insert supports efficient chip control, consistent surface finishes and fewer interruptions for tool changes — all contributing to improved throughput and lower manufacturing costs. For manufacturers seeking stable, reproducible results in turning, this grade and geometry combination offers a sound, cost-effective solution that integrates well into automated and manual turning workflows. Contact Metav Werkzeuge today for application advice on Walter Tools Tiger·tec Gold inserts and to secure a tailored cutting solution for steel turning tasks Technical Data SKU: CNMG120412-RP7-WPP10G-WALTER Article: Drehwendeschneidplatte CNMG120412-RP7 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Turning insert Facts Plate form: Rhombus 80° Plate size: 12 mm Plate thickness: 04 Corner radius: 1.2 mm Free rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: RP7 ISO designation: CNMG120412-RP7 WPP10G Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The CNMG120412-RP7 WPP10G insert is specified for machining steel (ISO P), covering unalloyed and alloyed steels commonly encountered in turning operations. Which operations suit the RP7 chipbreaker best? RP7 on the CNMG120412-RP7 insert is ideal for general turning where reliable chip control and consistent surface finish are required. How does the Tiger·tec Gold coating affect performance? Walter Tools’ Tiger·tec Gold coating on the WPP10G grade enhances thermal resistance and wear protection, extending tool life and supporting more stable cutting conditions. Is the CNMG120412-RP7 WPP10G recommended for stainless steel? The insert is designated for ISO group P (steel); stainless steel is not specified in the available data for this grade. What geometry and dimensions does this insert offer? The CNMG120412-RP7 WPP10G features a rhombic 80° form, 12 mm size, 04 thickness, 1.2 mm corner radius and a negative 0° rake, combined with the RP7 chipbreaker. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the trademark owners. The item described is an original, factory-new product of the manufacturer.
CNMG120412-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP20G grade for reliable, long-lasting performance in steel turning operations; the rhombic 80° geometry with RP7 chipbreaker and a 1.2 mm nose radius delivers consistent chip control and dimensional stability. Order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge’s specialists for application support. CNMG120412-RP7 WPP20G indexable turning insert — rhombic 80° geometry, Tiger·tec Gold (Walter Tools) CNMG120412-RP7 WPP20G is a coated carbide indexable insert designed for productive turning of steels with optimised chip control and stable tool life Tiger·tec Gold coated carbide WPP20G Optimised chipbreaker RP7 for stable chip control Rhombic 80° geometry for versatile turning 0° negative rake and 1.2 mm nose radius High productivity through advanced coating and grade The combination of Tiger·tec Gold coating and the WPP20G grade provides a balance of wear resistance and toughness that is particularly effective in turning operations on steel (ISO P). The coated carbide construction reduces flank and crater wear under typical steel cutting temperatures, which leads to longer tool life and fewer insert changes. This results in measurable productivity gains on medium- to high-duty turning tasks, where stable edge performance is essential for consistent cycle times and process reliability. Reliable chip control and process stability Built-in RP7 chipbreaking geometry and the rhombic 80° shape deliver reproducible chip formation and evacuation, helping to prevent edge damage and machine downtime. The 0° negative rake supports robust cutting in interrupted cuts and tougher workpiece conditions, while the 1.2 mm nose radius contributes to repeatable dimensional accuracy and surface finish. These features combine to reduce rework and increase throughput in batch production or mixed-series turning. Practical fitment and application advantages The insert’s ISO designation and compact format make it compatible with a wide range of toolholders and clamping systems commonly used in industry. The turnable rhombic form offers four usable cutting corners, improving economy per part. Designed primarily for steel machining, the grade distribution targets a broad spectrum of steels—from wear-resistant to general-purpose applications—offering a single, versatile solution where tool inventory consolidation and predictable performance are priorities. Contact Metav Werkzeuge for tailored application guidance and to secure Walter Tools Tiger·tec Gold inserts: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: CNMG120412-RP7-WPP20G-WALTER Designation: CNMG120412-RP7 WPP20G Product type: Indexable turning insert (drehwendeschneidplatte) Brand: Walter Tools Facts Insert size: 12 mm Thickness: 4 mm Nose radius: 1.2 mm Rake angle: 0° (negative) Geometry: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide grade) Grade: WPP20G Chipbreaker: RP7 Finish/execution: G Suitability: Steel (ISO P) Base designation without grade: CNMG120412-RP7 FAQ Is this insert suitable for turning steels? Yes. The CNMG120412-RP7 WPP20G insert is designed for machining steel (ISO P) and the WPP20G grade is optimised for the thermal and chip formation characteristics typical of steel turning. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and edge stability, which extends insert life under continuous steel machining and improves process reliability for Walter Tools turning inserts. How does the RP7 chipbreaker affect production? The RP7 chipbreaker promotes stable chip formation and evacuation, reducing risk of built-up edge and machine stoppages, which supports higher productivity and consistent surface quality. Can the rhombic 80° geometry be used for shoulder and profile turning? Yes. The rhombic 80° shape offers a versatile cutting orientation suitable for general turning, shoulder work and varied toolholder arrangements while providing four cutting corners per insert. What does the 0° negative rake imply for operation? A 0° negative rake provides a robust cutting edge suited to interrupted cuts and tougher tool engagement, contributing to reliable edge life and stable cutting for demanding turning tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CNMG120412-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high productivity, reliable chip control and the Tiger·tec Gold coating for consistent results when machining steel; order the insert via Metav Werkzeuge or contact our advisors for process recommendations. CNMG120412-RP7 WPP30G — Indexable turning insert, Tiger·tec Gold, for steel — Walter Tools CNMG120412-RP7 WPP30G is an indexable turning insert designed for steel machining applications, offering coated-carbide durability and an RP7 chipbreaker for controlled chip formation. High-process stability with Tiger·tec Gold Coated carbide grade WPP30G for steels RP7 chipbreaker for reliable chip control Rhombic 80° geometry for versatile turning Consistent cutting performance for steel components The combination of the WPP30G coated-carbide grade and the Tiger·tec Gold technology delivers a stable cutting edge optimised for a wide spectrum of steels (ISO group P). This arrangement reduces wear rates and helps maintain tool life under typical turning loads. The insert’s coating supports heat resistance and wear protection during continuous operation, which translates into fewer tool changes and more predictable production cycles. The result is improved process security and a lower cost per component when machining unalloyed and alloyed steels. Geometry and chip control that reduce cycle time The CNMG rhombic 80° shape with a 1.2 mm corner radius and the RP7 chipbreaker are engineered to produce manageable chips and a stable cutting action. The 0° negative rake angle contributes to a robust cutting edge suitable for a variety of turning tasks, while the RP7 geometry assists in forming short, controllable chips that protect the workpiece surface. For workshop planners this means fewer interruptions for chip clearing and a more consistent surface finish on parts, leading to improved throughput on standard turning operations. Designed for productivity and reproducible results Made to ISO-style dimensions and supplied in tolerance class M, the insert supports repeatable indexing and reliable repositioning, which is essential for high-volume production. The thickness designation and execution ensure mechanical stability under cutting forces common in steel turning. As a coated indexable insert intended for steel applications, it provides a balance of toughness and wear resistance that preserves dimensional accuracy across runs. The practical benefit is a reduction in process variability and more reliable batch-to-batch quality. Contact Metav Werkzeuge for detailed application advice on the Walter Tools CNMG120412-RP7 WPP30G insert and to receive tailored recommendations for cutting parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CNMG120412-RP7-WPP30G-WALTER Type: Indexable turning insert Designation: CNMG120412-RP7 WPP30G Brand: Walter Tools Series: Tiger·tec Gold Facts Inscribed circle: 12 Corner radius: 1.2 Thickness: 04 Free angle: 0° (negative) Tolerance class: M Special features Grade / Coating: WPP30G (coated carbide, Tiger·tec Gold) Chipbreaker: RP7 Plate form: Rhombus 80° Material application: Steel (ISO P) Execution: G FAQ What materials is this insert suitable for? The CNMG120412-RP7 WPP30G insert is specified for steel machining (ISO group P) and the WPP30G grade is tailored to the heat and chip formation typical of steel turning. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker on this insert promotes controlled chip formation and short chips, which supports consistent surface quality and reduces interruptions for chip management when using the CNMG120412-RP7 WPP30G insert. Is the insert suitable for interrupted cuts? The robust geometry—with a 0° negative rake and a 1.2 mm corner radius—gives the insert mechanical strength that is advantageous for less-continuous cutting conditions typical in many steel turning tasks. What production benefits does the Tiger·tec Gold series provide? Tiger·tec Gold technology, combined with the WPP30G coating, enhances wear resistance and heat tolerance; this leads to improved tool life and more stable processes when machining steel components. How is repeatability supported in batch production? Tolerance class M and standardised ISO geometry enable reproducible indexing and consistent positioning, reducing set-up variability and supporting batch-to-batch accuracy with the CNMG120412-RP7 WPP30G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer Walter Tools. The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
CNMG120416-MK5 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKK10S grade for reliable, wear‑resistant performance when machining abrasive cast iron; the rhombic 80° geometry with a 1.6 mm corner radius and MK5 chipbreaker ensures stable chip control and repeatable tool indexing. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG120416-MK5 WKK10S – Turning insert, Tiger‑tec Silver coating, for cast iron | Walter Tools The CNMG120416-MK5 WKK10S is a rhombic 80° turning insert engineered for productive finishing and medium‑depth turning of cast iron components. Tiger‑tec Silver coating for extended life WKK10S grade optimised for cast iron MK5 chipbreaker for controlled chips Rhombic 80° form with 1.6 mm corner radius High performance on abrasive cast iron for consistent throughput The combination of the WKK10S carbide grade and the Tiger‑tec Silver technology provides a marked improvement in wear resistance when cutting abrasive cast iron. These characteristics mean fewer tool changes and longer effective cutting intervals, which supports higher machine utilisation and predictable cycle times. The coated carbide substrate is tuned to handle the short, breaking chips typical of grey and nodular cast irons, converting material behaviour into a repeatable, manageable process. Controlled chips and stable cutting conditions reduce rework Equipped with the MK5 chipbreaker, this insert promotes consistent chip formation and evacuation, reducing the risk of workpiece damage and machine stoppage. The stable chip control simplifies coolant and cutting parameter selection, enabling safer operation in both automated and manual setups. The result is fewer interruptions, improved surface quality and lower downstream finishing effort. Geometry designed for reliable set‑up and dimensional repeatability The rhombic 80° plate form combined with a 1.6 mm corner radius and a 0° (negative) relief angle delivers a robust edge that tolerates interrupted cuts and variable surface conditions. This geometry supports precise radial positioning and easy indexing, which shortens tool changeover time and helps maintain part tolerances across production batches. Straightforward geometry also aids tool management in multi‑station toolholders. Economical machining through longer tool life and predictable performance With a coated, wear‑resistant composition and a grade tailored for cast iron, this insert provides a favourable cost‑per‑part ratio. The material and coating choices reduce flank wear and maintain edge stability, which lowers scrap rates and contributes to consistent surface finishes. For operations seeking to balance throughput and component quality, the insert offers an effective compromise between productivity and tool economy. The Walter Tools pedigree supports reliable sourcing and documented performance characteristics. Contact Metav Werkzeuge today for detailed cutting data and to discuss the suitability of Walter Tools Tiger‑tec Silver WKK10S inserts for specific cast iron applications Technical Data Article number: CNMG120416-MK5-WKK10S-WALTER Designation: CNMG120416-MK5 WKK10S Series: Tiger‑tec Silver Grade: WKK10S Manufacturer: Walter Tools Facts Plate form: Rhombus 80° Plate size: 12 Thickness: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Chipbreaker: MK5 Tolerance class: M Special features Coated carbide grade optimised for cast iron Suitable material group: K (cast iron) Engineered for abrasive wear resistance Stable edge for interrupted cuts Repeatable indexing and easy handling FAQ What materials is this insert best suited for? The insert is designed for cast iron machining; the WKK10S grade and Tiger‑tec Silver coating of the CNMG120416‑MK5 WKK10S are optimised to handle abrasive cast iron and produce stable chips. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker on the CNMG120416‑MK5 promotes short, controllable chips and improves evacuation, which helps maintain consistent surface finishes and reduces the likelihood of chip entanglement. Can this insert be used for interrupted cuts? Yes, the rhombic 80° geometry and robust edge preparation provide the mechanical strength necessary for interrupted cutting typical in cast iron turning. Which feature most improves tool life in abrasive conditions? The Tiger‑tec Silver coating combined with the WKK10S coated carbide grade increases resistance to abrasive wear, extending the effective tool life when machining cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the mentioned manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CNMG120416-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Combine the wear resistance of the Tiger·tec Silver coating with precise MK5 chip control and the proven rhombic 80° geometry for efficient cast iron turning; order directly via Metav Werkzeuge or contact their consultants for tailored application support. CNMG120416-MK5 WKK20S Indexable turning insert — Tiger·tec Silver, for cast iron (Walter Tools) CNMG120416-MK5 WKK20S is an indexable turning insert designed for reliable machining of cast iron components, offering a coated carbide grade and a dedicated MK5 chipbreaker for consistent short chips Tiger·tec Silver coating for extended tool life Optimised for cast iron machining Rhombic 80° form with 1.6 mm corner radius MK5 chipbreaker for short, controllable chips Consistent productivity for abrasive cast iron work The combination of the Tiger·tec Silver coating and the WKK20S grade delivers enhanced wear resistance specifically tuned for abrasive cast iron materials. The coated cemented carbide construction reduces flank and crater wear, which in turn sustains cutting performance over longer tool life and reduces tool-change frequency. For production runs where abrasive wear dominates, this insert supports a stable process and predictable replacement intervals, contributing to lower overall machining costs. Geometry and chip management that reduce downtime A rhombic 80° form with a 1.6 mm corner radius and the MK5 chipbreaker ensure consistent formation of short, broken chips when machining grey and nodular cast irons. The negative 0° relief supports robust cutting edges and helps maintain cutting stability under interrupted cuts or heavy cross-sections. Effective chip control reduces the risk of entanglement, shortens machine-cleaning cycles and lowers the likelihood of part damage, thereby improving net operating time in the workshop. Integration into turning cycles and tooling systems The insert’s standard CNMG geometry fits most compatible indexable toolholders that accept CNMG inserts; the series emphasis on cast iron makes it a practical choice for dedicated finishing and semi-finishing operations. The coated grade is formulated to perform under typical turning feeds and speeds for cast iron, allowing process planners to rely on predictable tool life when establishing cycle times. When combining the insert with appropriately rated toolholders and stable clamping, the result is repeatable part quality and reduced scrap rates. Practical considerations for setup and economy Due to its focus on abrasive cast iron machining, the insert is best used where short-chipping behaviour is required and robustness is more important than aggressive light finishing. The coated carbide substrate and chipbreaker geometry offer a balance between economy and performance, making this solution suitable for batch production and mixed-series work where downtime and regrinding costs must be minimised. Technical teams benefit from the insert’s consistent edge behaviour when planning tool inventories and replacement schedules. Contact Metav Werkzeuge for application-specific cutting data and advice on integrating the Walter Tools CNMG120416-MK5 WKK20S insert into production — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: CNMG120416-MK5-WKK20S-WALTER Designation: CNMG120416-MK5 WKK20S Product type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Data Corner radius: 1.6 mm Plate size: 12 Plate thickness: 04 Relief angle: 0° (negative) Special features Series: Tiger·tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MK5 (short-chip geometry) Plate form: Rhombic 80° Application: Cast iron machining (K) FAQ Which materials is this insert suitable for? The CNMG120416-MK5 WKK20S insert from Walter Tools is specifically formulated for cast iron (material group K) and is tuned to handle the abrasive wear typical of such alloys. What is the main advantage of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKK20S grade increases resistance to abrasive and thermal wear, which extends tool life when the insert is used on cast iron components. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker produces short, controllable chips that improve machine cleanliness and reduce the risk of chip-related interruptions during turning with this insert. Is this insert compatible with standard CNMG toolholders? The insert follows the CNMG120416 geometry and is compatible with standard toolholders designed for CNMG inserts, provided appropriate clamping and clearance are observed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CNMG120416-MM5 WMP20G WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the MM5 chipbreaker for secure chip formation and extended edge life when machining stainless steel; order directly via Metav Werkzeuge or consult their technical team for application-specific advice. CNMG120416-MM5 WMP20G indexable turning insert — Tiger‑tec Gold coating, for stainless steel (Walter Tools) CNMG120416-MM5 WMP20G is an indexable turning insert tailored for medium to robust machining conditions in stainless steel, offering a compact Rhombus 80° geometry and a 1.6 mm corner radius. Tiger‑tec Gold coated carbide grade WMP20G Optimised chip control MM5 geometry 0° negative rake for stable cutting Suitable for stainless steel (ISO M) Consistent cutting performance with advanced coating and grade The combination of the WMP20G grade and the Tiger‑tec Gold coating delivers a balance of wear resistance and heat tolerance suited to stainless steel. Coated carbide in this class supports stable cutting edges and reduces the risk of built‑up edge formation, which is a common challenge with austenitic and work‑hardening alloys. The result is more predictable tool life and more consistent surface quality over extended production runs, improving process reliability and lowering the overall machining cost per component. Better chip control and effective edge geometry The MM5 chipbreaker has been developed for secure chip formation when working with tough materials. Paired with the Rhombus 80° form and a 1.6 mm corner radius, the insert offers a compromise between edge robustness and accessibility for a variety of turning tasks. The 0° negative rake increases cutting edge strength and helps maintain stability under moderate to heavy cutting parameters; this makes the insert especially suitable for operations where interrupted cuts or variable depths of cut occur. These geometric choices translate directly into fewer tool changes and less downtime. Versatile use and process advantages for production workshops Designed for standard indexable holders, the insert’s dimensions and shape support easy integration into existing tooling systems. The material classification M indicates a focus on stainless steel (ISO M), so the insert performs reliably across common stainless families that tend to work‑harden. For production environments the Tiger‑tec Gold technology contributes to reproducible results and consistent surface finish, enabling shops to maintain throughput while keeping quality stable. The design therefore supports efficient workflows and dependable component tolerances. For machining stainless steel with enhanced edge life and secure chip control, contact Metav Werkzeuge for ordering and tailored application guidance: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: CNMG120416-MM5-WMP20G-WALTER Product: Drehwendeschneidplatte CNMG120416-MM5 WMP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Material class: M (coated carbide) Core specifications Plate size: 12 Corner radius: 1.6 mm Rake angle: 0° (negative) Chipbreaker: MM5 Thickness code: 04 Plate form: Rhombus 80° Special features Coating: Tiger‑tec Gold Grade: WMP20G Suitable for: stainless steel (ISO M) Sort description: coated carbide, moderate to robust conditions Application focus: secure chip formation and stable cutting edges FAQ What materials is this insert designed for? The CNMG120416-MM5 WMP20G insert from Walter Tools is specified for stainless steel (ISO M) and performs well where work‑hardening and high heat generation are common. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on the CNMG120416-MM5 WMP20G promotes controlled chip formation, reducing entanglement and improving surface quality during turning of stainless steel. What advantages does Tiger‑tec Gold offer? Tiger‑tec Gold coating on the WMP20G grade improves wear resistance and heat tolerance, extending insert life and maintaining stable cutting edges under demanding conditions. Why is a 0° negative rake beneficial for this insert? A 0° negative rake increases edge strength and cutting stability, which helps when machining tougher stainless steel grades or when encountering interrupted cuts. Which cutting tasks suit a 1.6 mm corner radius? A 1.6 mm corner radius provides a robust edge for general turning tasks, offering a balance between strength and surface finish for medium to heavy cuts with the CNMG120416-MM5 WMP20G. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer.
CNMG120416-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Combine high wear resistance with controlled chip formation for consistent, productive turning of stainless steel and heat‑resistant alloys; the Tiger·tec Silver grade WSM20S and the robust CNMG geometry deliver stable cutting edges and longer tool life. Order directly via Metav Werkzeuge or contact our consultants for application support. CNMG120416-MM5 WSM20S — indexable turning insert, Tiger·tec Silver coating, Walter Tools The CNMG120416-MM5 WSM20S is an indexable turning insert engineered for heavy and finish turning of stainless steel and superalloys, offering a balance of edge stability and wear resistance in demanding industrial production. Tiger·tec Silver coating technology WSM20S grade for stainless steel and superalloys Negative 0° rake for heavy cutting 1.6 mm corner radius for robust edge Maximise productivity with specialised grade and coating The combination of the WSM20S carbide grade and the Tiger·tec Silver coating focuses on reliable performance when machining materials that generate heat and tend to work‑harden. Specifically developed for stainless steel (ISO group M) and the S group (heat‑resistant superalloys and titanium), this insert supports stable chip formation and reduces the risk of built‑up edge. The coated substrate improves thermal resistance and wear control, which translates into fewer insert changes and more uninterrupted production time — a clear efficiency advantage for batch and continuous turning operations. Geometry that sustains cutting forces and surface quality The CNMG rhombic form with an 80° included angle and a 0° (negative) rake angle provides rigidity under heavy radial loads, while the 1.6 mm corner radius offers a compromise between strength and achievable surface finish. The MM5 chipbreaker is tuned to support controlled chip evacuation in interrupted cuts and long, continuous cuts alike, reducing recutting and helping maintain consistent dimensional accuracy. These geometric choices enable secure metal removal rates without sacrificing component tolerances, making the insert suitable for both roughing passes and hard‑to‑machine finishing steps. Process reliability, tool life and cost efficiency By combining a wear‑resistant grade with a specialised coating and a robust edge design, this insert helps reduce tooling costs per component through extended life and predictable wear patterns. The stable cutting edge performance reduces scatter in tool life, simplifying process planning and inventory control. For manufacturers seeking repeatable results across shifts, the insert’s characteristics support higher process security and fewer unplanned stoppages. Walter Tools’ engineering and the Tiger·tec Silver technology provide the technical basis for improved throughput and consistent surface integrity in demanding machining tasks. Discuss machining requirements with Metav Werkzeuge to select the ideal insert geometry and optimise cutting parameters for the Tiger·tec Silver WSM20S; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specialist advice and supply. Technical data SKU: CNMG120416-MM5-WSM20S-WALTER Designation: CNMG120416-MM5 Full designation: CNMG120416-MM5 WSM20S Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Insert size: 12 mm Thickness code: 04 Rake: 0° (negative) Insert shape: Rhombus 80° Special features Grade: WSM20S Series: Tiger·tec Silver Chipbreaker: MM5 Material compatibility: stainless steel (M), superalloys/titanium (S) Tolerance class: M Product type: indexable turning insert (Drehwendeschneidplatte) FAQ What materials is this insert suitable for? The CNMG120416‑MM5 WSM20S insert is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and controlled chip formation. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating on the WSM20S grade increases thermal and abrasive wear resistance, which extends tool life and supports reliable cutting in demanding applications. Which cutting tasks benefit most from the CNMG geometry? The rhombic 80° CNMG form with a 0° negative rake and 1.6 mm corner radius is suited to heavy roughing and robust finishing where edge strength and process security are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CNMG120416-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the high process security and stable cutting edge of the Tiger·tec Silver grade together with the MM5 chipbreaker for efficient turning of stainless steel and heat-resistant alloys; order genuine inserts directly via Metav Werkzeuge or request application advice from our consultants. CNMG120416-MM5 WSM30S turning insert — Tiger·tec Silver grade for stainless steel and superalloys by Walter Tools The CNMG120416-MM5 WSM30S is a coated carbide indexable insert designed for demanding turning applications, particularly suited to stainless steel and heat-resistant superalloys. Tiger·tec Silver coated carbide Optimised MM5 chipbreaker for stable chips Suitable for stainless steel and superalloys Rhombus 80° geometry with 1.6 mm nose radius Boosted process reliability through advanced coating and grade The combination of Tiger·tec Silver coating and the WSM30S grade delivers thermal stability and improved wear resistance, which together reduce flank wear and extend tool life in continuous and interrupted cuts. For machining stainless steel and difficult-to-machine materials, the coated carbide formulation promotes consistent cutting-edge performance and more reliable dimensional results. This translates into fewer tool changes, less downtime and a steadier production flow — a rational benefit for high-throughput turning operations. Predictable chip control and accurate geometry for consistent surface quality The MM5 chipbreaker and rhombus 80° form provide controlled chip formation even under the tough conditions associated with superalloys and stainless materials. With a 1.6 mm nose radius and a 0° negative relief angle, the geometry supports robust cutting edges and stable engagement, improving surface finish while limiting vibration. Clear chip control reduces the risk of built-up edge and part rework, so productivity gains are both measurable and repeatable on series components. Practical interchangeability and application guidance for workshop use Tolerance class M ensures dimensional consistency for toolholders that accept CNMG inserts, easing inventory management and facilitating quick changeovers. The insert size and form suit medium-to-heavy turning tasks where edge stability and heat resistance are required. For customers needing application-specific recommendations or verification of suitability for particular stainless steel grades or exotic alloys, the technical team at Metav Werkzeuge can offer process-focused advice and optimisation tips that align cutting data with the WSM30S performance profile. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts and to secure genuine CNMG120416-MM5 WSM30S parts for production use. Technical data Article number: CNMG120416-MM5-WSM30S-WALTER Designation: CNMG120416-MM5 WSM30S Product type: Turning indexable insert Brand: Walter Tools Series: Tiger-tec Silver Facts Size: 12 mm Nose radius: 1.6 mm Relief angle: 0° (negative) Thickness code: 04 Tolerance class: M Special features Coating: Tiger·tec Silver (coated carbide) Grade: WSM30S Chipbreaker: MM5 Geometry: Rhombus 80° Material suitability: stainless steel (M); heat-resistant superalloys and titanium (S) FAQ Which materials are suitable for this insert? The CNMG120416-MM5 WSM30S insert is formulated for machining stainless steel and is also suitable for heat-resistant superalloys and titanium when the cutting data and geometry are matched to the application. What does the MM5 chipbreaker deliver in practice? The MM5 chipbreaker on this insert supports stable chip formation and controlled segmentation, which improves chip evacuation and reduces the likelihood of built-up edge during turning of tough materials. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WSM30S grade increases thermal resistance and wear protection, extending the service life of the insert under higher cutting temperatures common when machining stainless steel and superalloys. What are the key geometry details of the insert? This turning insert features a rhombic 80° form, a 1.6 mm nose radius and a 0° negative relief angle, providing robust edge support for medium-to-heavy turning operations. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG120416-MM5 WSM30S conforms to CNMG geometry and tolerance class M, ensuring compatibility with toolholders designed for CNMG inserts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120416-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the MP5 chipbreaker for stable chip control and the robust Rhombic 80° geometry to keep turning operations productive and predictable. Order the insert directly via Metav Werkzeuge or consult the team for cutting data and application advice. CNMG120416‑MP5 WPP10G turning insert — Rhombic 80°, R1.6 (Walter Tools) The CNMG120416‑MP5 WPP10G is a Rhombic 80° turning insert engineered for high-performance Stahl machining with Tiger·tec Gold coated carbide and an MP5 chipbreaker for consistent results. Tiger·tec Gold coating for high wear resistance MP5 chipbreaker for stable chip control Rhombic 80° form with R1.6 for versatility Negative 0° rake for robust cutting action Maximise productivity in Stahl turning The combination of Tiger·tec Gold coated carbide and the MP5 chipbreaker delivers sustained cutting performance across a wide range of Stahl grades. The coating reduces flank wear and increases tool life, while the chipbreaker promotes short, controllable chips that reduce interruption and secondary finishing. This translates into fewer tool changes and a steadier production flow, especially on medium to heavy turning operations where consistent material removal and tool life are decisive. Predictable surface finish with precise geometry The Rhombic 80° form and R1.6 corner radius provide a reliable contact geometry that helps to achieve repeatable surface quality. The negative 0° rake increases edge strength under interrupted cuts and allows for more aggressive depth of cut without compromising stability. For operations requiring dimensional consistency, the insert’s geometry supports predictable results and reduces rework, making it suitable for batch production and long turning cycles. Robustness and versatility for demanding tasks Designed as a coated carbide grade from the Tiger·tec Gold family, this indexable insert is optimised for a balance of wear resistance and toughness. The combination of coating technology and the MP5 breaker makes the insert versatile across finishing and medium-turning tasks on Stahl. The insert’s tolerance class M and grade designation support reliable seat fit and repeatable indexing, which is beneficial when rapid tool changes are part of the machining process. Application guidance and material compatibility This insert is intended primarily for Stahl machining, with a composition and chip control tuned to the typical heat and chip formation encountered when cutting these materials. When selecting feeds and speeds, favour parameters that maintain a stable chip flow with the MP5 chipbreaker and protect the cutting edge from thermal overload. For optimised results, pair the insert with appropriate tool holders and cutting fluids that suit the specific Stahl grade being machined. Contact Metav Werkzeuge for tailored cutting data, delivery information and application advice for the Walter Tools Tiger·tec Gold CNMG120416‑MP5 WPP10G insert Technical Data Article number: CNMG120416-MP5-WPP10G-WALTER Designation: CNMG120416-MP5 WPP10G Label: Drehwendeschneidplatte CNMG120416-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Core Technical Data Size: 12 Thickness: 04 Corner radius: 1.6 mm Relief angle: 0° (negative) Insert form: Rhombic 80° Chipbreaker: MP5 Grade / Series: WPP10G / Tiger·tec Gold Tolerance class: M Material code: P Special features and versions Coating technology: Tiger·tec Gold (coated carbide) Application: Stahl Geometry: Rhombic 80° with R1.6 Chip control: MP5 chipbreaker Execution: G FAQ What materials is this insert suitable for? This indexable insert is optimised for Stahl applications; the WPP10G grade and Tiger·tec Gold coating are tuned for common unalloyed and alloyed Stahl machining scenarios. Which chip control does the insert provide? The MP5 chipbreaker ensures short, controlled chips under typical turning conditions, improving surface finish and reducing secondary operations for the CNMG120416‑MP5 WPP10G insert. How does the negative 0° rake influence cutting performance? A negative 0° rake increases edge strength and stability, making the insert well suited to interrupted cuts and heavier depth-of-cut scenarios encountered in Stahl turning. Is this insert suitable for finishing operations? Yes; the combination of the Rhombic 80° geometry and R1.6 corner radius allows for consistent finishing performance when appropriate feeds and speeds are selected. What tolerance and fit can be expected? The insert is supplied in tolerance class M, supporting accurate seat fit and repeatable indexing for consistent tool changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
CNMG120416-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of extended tool life and consistent chip control through the combination of Tiger·tec Gold coating and the MP5 chipbreaker, while the rhombic 80° geometry with a 1.6 mm corner radius delivers stability in demanding turning operations; order directly via Metav Werkzeuge or consult our application specialists for process optimisation. CNMG120416-MP5 WPP20G Drehwendeschneidplatte (turning insert) for Stahl — Tiger·tec Gold, MP5 by Walter Tools CNMG120416-MP5 WPP20G is an indexable turning insert designed for efficient medium-duty turning of Stahl, combining a high-performance Tiger·tec Gold coating with an MP5 chipbreaker for reliable chip formation and repeatable results Tiger·tec Gold coating for extended tool life MP5 chipbreaker for consistent chip control Rhombic 80° form for versatile turning Corner radius 1.6 mm for stable cutting edge Increased productivity through secure chip control and coating technology The combination of the WPP20G grade and the Tiger·tec Gold coating is engineered to reduce wear and maintain cutting-edge integrity under the thermal and mechanical loads typical for machining Stahl. The MP5 chipbreaker provides predictable chip formation, which lowers the risk of chip-related interruptions and shortens cycle times. For production environments where process stability and time efficiency are critical, this insert delivers a measurable improvement in tool life and component consistency. The coating technology also supports a wider range of cutting conditions, enabling more economical use of machine capacity. Robust geometry for repeatable surface quality and edge strength The rhombic 80° geometry and 1.6 mm corner radius are configured to balance edge strength with accessibility for a variety of turning operations. The negative relief angle of 0° (negative) increases the insert’s resistance to impact and flank wear, making it suitable for applications with slight interruptions or roughing passes. As a result, operators benefit from fewer tool changes and more consistent surface finishes. The stable geometry supports dimensional repeatability, which is particularly relevant in batch production where every workpiece must meet the same tolerances. Application scope, handling and process benefits for machining Stahl This indexable insert is classified for material group P, meaning it is optimised for unalloyed and alloyed Stahl. The coated carbide grade is designed for a balance of wear resistance and toughness, offering long tool life without sacrificing reliability in varying cutting conditions. For set-up, select cutting parameters that reflect the part geometry and machine rigidity; the MP5 chipbreaker aids in avoiding entangled chips and improves surface integrity. With correct speeds and feeds, the insert supports efficient, repeatable machining and reduces overall process costs through fewer interruptions and longer service intervals. Contact Metav Werkzeuge today for tailored application advice and to source Walter Tools CNMG120416-MP5 WPP20G turning inserts; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-specific support Technical Data Article number: CNMG120416-MP5-WPP20G-WALTER Label: Drehwendeschneidplatte CNMG120416-MP5 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade/series: Tiger·tec Gold Facts Corner radius: 1.6 mm Insert size: 12 Thickness: 04 Relief angle: 0° (negative) Tolerance class: M Form: Rhombus 80° Special features Chipbreaker: MP5 Grade: WPP20G Coating technology: Tiger·tec Gold Application group: P (Stahl) Execution: G FAQ What materials is this insert intended for? The CNMG120416-MP5 WPP20G insert is optimised for machining Stahl (material group P), covering unalloyed and alloyed steels according to ISO material group definitions. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP20G grade increases wear resistance and thermal stability, enabling longer cutting times and more consistent tool performance in demanding turning operations. Which cutting tasks suit the rhombic 80° geometry? The rhombic 80° form is versatile for general turning, profiling and light shoulder work; the geometry of the CNMG120416-MP5 supports good access and reproducible surface finish across varied part geometries. What does the MP5 chipbreaker deliver in everyday machining? The MP5 chipbreaker ensures predictable chip shapes and evacuation, reducing risk of chip build-up and improving surface integrity, which contributes to fewer interruptions and steadier cycle times. Is this insert suitable for interrupted cuts or unstable setups? With a 1.6 mm corner radius and a 0° negative relief, the insert offers increased edge strength and resistance to impact, making it a good choice for operations with occasional interruptions or less rigid set-ups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120416-MP5 WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of economic machining, reliable wear resistance and precise geometry for consistent turning results; order genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for application support. CNMG120416-MP5 WPP30G – Turning insert (Rhombus 80°, 1.6 mm) by Walter Tools The CNMG120416-MP5 WPP30G is a coated turning indexable insert designed for efficient machining of Stahl, optimised for stable chip formation and broad applicability in general turning operations. Tiger‑tec Gold coated carbide grade WPP30G MP5 chipbreaker for consistent chip control Rhombic 80° form with 1.6 mm corner radius Negative 0° rake for robust cutting action Higher productivity through advanced grade technology The WPP30G grade from the Tiger‑tec Gold family combines a coated carbide microstructure with surface engineering that reduces flank wear and extends edge life when machining Stahl. The result is a measurable reduction in tool changes and machine idle time, which improves overall throughput. The MP5 chipbreaker promotes predictable chip formation under a variety of cutting conditions, simplifying process control and enabling more aggressive cutting parameters without sacrificing surface quality. Reliable geometry for repeatable component quality A Rhombus 80° plate form and a 1.6 mm corner radius deliver a stable cutting edge that withstands intermittent cuts and varying depths of cut. The 0° (negative) free angle contributes to a robust edge line that resists chipping in heavy-duty turning tasks, while the tolerance class M helps ensure consistent seating and repeatability between re‑indices. These geometric features translate into lower scrap rates and fewer quality deviations in serial production. Versatile application and process benefits The insert is tailored to the typical thermal and chip‑control challenges of Stahl, making it suitable for a broad spectrum of turning tasks from semi‑finishing to general turning. The coated grade’s balance between hardness and toughness supports both elevated cutting speeds and extended tool life, delivering a favourable cost‑per‑part metric in medium to high volume operations. For integration, the insert conforms to the CNMG geometry and fits standard CNMG toolholders, facilitating rapid changeover and tooling standardisation. Speak to Metav Werkzeuge for tailored cutting data and to request genuine Walter Tools Tiger‑tec Gold inserts; Metav Werkzeuge’s specialists provide application advice and rapid delivery from stock Technical Data Article number: CNMG120416-MP5-WPP30G-WALTER Designation: CNMG120416-MP5 WPP30G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Plate size: 12 Thickness: 04 Corner radius: 1.6 mm Free angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Special features Chipbreaker: MP5 Grade: WPP30G (coated carbide) Material application: Stahl Robust negative geometry for interrupted cuts Universal use range for general turning tasks FAQ What materials is this insert intended for? The CNMG120416-MP5 WPP30G is optimised for machining Stahl, including common unalloyed and alloyed steels as indicated by its P‑class design. What coating and grade does the insert use? This insert uses the Tiger‑tec Gold coating in the WPP30G grade, a coated carbide designed for a balance of wear resistance and toughness. Which chipbreaker is fitted and what does it deliver? The MP5 chipbreaker on the CNMG120416-MP5 WPP30G promotes controlled chip formation, improving process reliability and surface finish in a wide range of turning conditions. What geometry should be expected when fitting the insert? The insert features a Rhombus 80° form, a 1.6 mm corner radius and a 0° (negative) free angle, providing a robust edge suitable for general turning and interrupted cuts. Is the insert compatible with standard toolholders? The CNMG120416-MP5 WPP30G follows the CNMG geometry and is compatible with standard CNMG turning toolholders, enabling straightforward integration into existing tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for identification and explanatory purposes. There is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
CNMG120416-MU5 WPP05G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the MU5 chipbreaker to achieve stable cutting performance and extended tool life when machining steel; order directly via Metav Werkzeuge or consult the colleagues there for application advice. CNMG120416-MU5 WPP05G indexable turning insert — Tiger·tec Gold for steel machining by Walter Tools The CNMG120416-MU5 WPP05G is an indexable turning insert designed for general turning of steel, combining a robust geometry with a coated carbide grade for reliable, repeatable performance. Tiger·tec Gold coated for extended life MU5 chipbreaker for reliable chip control Rhombus 80° with 1.6 mm nose radius Negative 0° rake for heavy cuts Durable coating that reduces downtime and tooling costs The insert’s Tiger·tec Gold surface engineering and WPP05G grade deliver a coated carbide construction engineered for wear resistance and a stable cutting edge. This reduces flank wear and extends tool life, lowering tooling expenditure over production cycles. For manufacturing environments where predictable tool life supports planning and throughput, the coating improves resistance to abrasive and adhesive wear mechanisms commonly encountered when machining steel (ISO P). The result is fewer tool changes and more consistent component quality. Geometry and chip control for efficient material removal Optimised geometry, including the Rhombus 80° form and the MU5 chipbreaker, promotes stable chip formation and evacuation during medium to heavy turning operations. The 1.6 mm nose radius balances surface finish and strength, while the 0° negative rake provides a robust cutting edge for interrupted cuts and tougher feed conditions. The chipbreaker’s function is to break and direct chips away from the cutting zone, improving process reliability and making coolant and swarf management more predictable on the shop floor. Designed for steel applications with industrial repeatability Classified for ISO group P (steel) and produced to tolerance class M, this insert is tailored to unalloyed and alloyed steels where heat and chip formation follow typical steel machining patterns. The insert family offers a combination of toughness and wear resistance suitable for everyday turning tasks in jobbing and production environments. If clarification is needed on compatibility with specific steels or cutting parameters, Metav Werkzeuge provides technical support and can advise on feeds, speeds and clamping to ensure safe, productive integration into existing operations. Contact details are available for further technical data: info@metav-werkzeuge.com, +49 2822 7131930. Contact Metav Werkzeuge for application-specific advice on the Walter Tools Tiger·tec Gold CNMG120416-MU5 WPP05G and to confirm the best grade and parameters for steel turning. Technical data Article number: CNMG120416-MU5-WPP05G-WALTER Product type: Indexable turning insert Designation: CNMG120416-MU5 WPP05G Manufacturer: Walter Tools Dimensions & core data Inscribed circle / nominal size: 12 mm Nose radius: 1.6 mm Thickness code: 04 Relief angle: 0° (negative) Tolerance class: M Materials & special features Coating / series: Tiger·tec Gold Grade: WPP05G Substrate: Coated carbide Chipbreaker: MU5 Insert form: Rhombus 80° Application group: Steel (ISO P) Execution: G (negative) FAQ What materials is this insert suitable for? The CNMG120416-MU5 WPP05G is specified for steel (ISO P); the WPP05G grade and Tiger·tec Gold coating are optimised for the heat and chip behaviour typical of steel machining. How does the MU5 chipbreaker affect productivity? The MU5 chipbreaker promotes predictable chip formation and evacuation, improving cycle times and reducing the risk of surface damage during turning with the CNMG120416-MU5 WPP05G insert. Is the insert available in a positive rake version? This particular designation is supplied with a 0° negative relief; other rake variants require a different insert code and should be checked with Metav Werkzeuge for availability. What surface finish can be expected with a 1.6 mm nose radius? A 1.6 mm nose radius on the Rhombus 80° geometry offers a compromise between strength and finish, enabling good surface quality on semi-finish and finish turning while maintaining edge stability under higher loads. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold increases wear resistance and thermal stability of the coated carbide, delivering more consistent tool life and repeatable results across production batches with the CNMG120416-MU5 WPP05G insert. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The item offered is original, factory-new merchandise from the manufacturer.
CNMG120416-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coated carbide grade, a robust MU5 chipbreaker and the resilient Rhombic 80° geometry to improve cycle stability and tool life in steel turning. Order the insert directly via Metav Werkzeuge or request application advice from the consultancy team for optimal cutting data. CNMG120416-MU5 WPP10G indexable turning insert — Tiger·tec Gold for steel, Walter Tools The CNMG120416-MU5 WPP10G is an indexable turning insert engineered for steel machining, featuring a Tiger·tec Gold coated carbide grade and an MU5 chipbreaker for consistent chip control. Tiger·tec Gold coating for extended edge life Optimised for steel machining (ISO P) Rhombic 80° shape with 1.6 mm corner radius MU5 chipbreaker for consistent chip control Higher productivity through advanced coating and grade The coated carbide grade from the Tiger·tec Gold series delivers a tangible increase in tool life and process stability. Thanks to the coated carbide technology and the balanced composition of WPP10G, the insert resists abrasive wear while maintaining toughness during interrupted cuts, which reduces downtime for index changes. This results in fewer tool changes per shift and more reliable cycle times when machining steels under standard industrial cutting conditions. Robust geometry for secure cutting and predictable results The Rhombic 80° shape combined with a 1.6 mm corner radius provides a secure cutting edge and greater radial support, improving surface finish and dimensional consistency on turned components. The negative rake 0° setting increases edge strength for heavier depths of cut, while the MU5 chipbreaker is tuned to produce short, controlled chips during general steel turning. These geometric choices reduce vibration and protect the cutting edge in tougher operations, enhancing overall process reliability. Broad suitability for steel and practical shop-floor use Designed specifically for the ISO P material group, the grade shows a deliberate balance between wear resistance and transient toughness, making it suitable for unalloyed and alloyed steels encountered in everyday production. The WPP10G specification focuses on consistent performance across machining scenarios classified as 10 (wear-resistant) to 30/35 (tougher) in the manufacturer's grouping, which helps planners and programmers select cutting parameters with confidence. Simple integration and economy of use The CNMG geometry fits common CNMG pockets and is supplied in the well-known CNMG120416 format for straightforward replacement and inventory management. With its Tiger·tec Gold surface and MU5 chip control, the insert supports longer index intervals and predictable reconditioning cycles, which lowers tooling cost per part and simplifies tool assortment on the shop floor. For machining operations where stability and repeatability matter, this insert delivers measurable savings through extended useful life. Contact Metav Werkzeuge for tailored tooling recommendations, availability and application data for Walter Tools inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: CNMG120416-MU5-WPP10G-WALTER Designation: CNMG120416-MU5 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Plate size: 12 Plate thickness: 04 Corner radius: 1.6 Clearance angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: MU5 Shape: Rhombic 80° Execution: G Material application: Steel (ISO P) FAQ What materials is this insert suitable for? The CNMG120416-MU5 WPP10G insert is specified for the ISO P material group and is suitable for machining various steels. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on this Walter Tools grade improves wear resistance and thermal stability, extending useful edge life under typical steel-cutting conditions. What benefit does the MU5 chipbreaker provide? The MU5 chipbreaker produces short, controlled chips in steel turning, aiding chip evacuation and reducing the risk of entanglement. What does the 1.6 corner radius mean for finishing? A 1.6 mm corner radius increases edge support for tougher cuts and helps deliver a consistent surface finish while resisting edge chipping. Is this insert compatible with standard CNMG toolholders? The CNMG120416 format corresponds to standard CNMG pockets; compatibility depends on the toolholder specification and clamping system. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120416-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
High wear resistance and consistent chip control from the Tiger·tec Gold grade combined with the MU5 chipbreaker deliver reliable productivity and long tool life; order the CNMG120416-MU5 WPP20G indexable turning insert via Metav Werkzeuge or consult their specialists for tailored cutting data. CNMG120416-MU5 WPP20G indexable turning insert for steel machining by Walter Tools, Tiger·tec Gold, MU5 A CNMG120416-MU5 WPP20G indexable turning insert built for productive steel turning, offering a coated-carbide grade and a MU5 chipbreaker for stable chip formation in ISO P materials. Tiger·tec Gold coating for extended tool life MU5 chipbreaker for reliable chip control 1.6 mm corner radius for robust edge strength Optimised for steel machining (ISO P) Increased productivity through advanced grade and coating The combination of a coated carbide grade and the Tiger·tec Gold technology aims to extend tool life while maintaining cutting performance across typical steel applications. The grade WPP20G is engineered for a balance of wear resistance and toughness, which translates into fewer insert changes and higher effective cutting times. For production environments this means more consistent cycle times and reduced downtime. The machining advantage is measurable in sustained edge stability and predictable wear behaviour under common turning conditions. Predictable chip control and mechanical robustness Geometry plays a decisive role in process reliability: the MU5 chipbreaker is designed to shape chips for safe evacuation and steady cutting forces, reducing the risk of built-up edge and surface defects. The insert’s 1.6 mm corner radius provides a compromise between edge strength and surface finish, increasing robustness during interrupted cuts. The 0° (negative) relief angle and the rhombus 80° shape combine to offer stable seating in negative toolholders and repeatable cutting orientation. For operators less familiar with insert technology: a chipbreaker channels metal swarf into short, controlled segments, improving safety and reducing secondary cleaning. Application focus and process security for steel Intended primarily for steel (ISO P) applications, the insert’s grade allocation emphasises versatility for unalloyed and alloyed steels where heat development and chip formation require tailored materials and coatings. Tolerance class M ensures dimensional consistency for indexable tooling systems, supporting straightforward insert replacement and predictable programme settings. The format and series make this insert suitable for medium-duty turning operations where a balance of productivity and surface quality is required, helping to secure consistent results across batch runs. Contact Metav Werkzeuge for application-specific recommendations and to arrange supply of the CNMG120416-MU5 WPP20G; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and cutting data Technical data Article number: CNMG120416-MU5-WPP20G-WALTER Product: CNMG120416-MU5 WPP20G Type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Corner radius: 1.6 mm Size designation: 12 Thickness designation: 04 Relief angle: 0° (negative) Tolerance class: M Shape: rhombus 80° Chipbreaker: MU5 Material code: P (suitable for steel) Coating technology: Tiger·tec Gold Application focus: steel machining (ISO P) FAQ What materials is this insert intended for? The CNMG120416-MU5 WPP20G insert is specified for steel (ISO P) machining and the WPP20G grade is tailored to typical steel heat and chip characteristics. How does the MU5 chipbreaker improve the process? The MU5 chipbreaker controls chip form and evacuation, producing shorter, manageable chips that support stable cutting forces and reduce surface faults during turning. What does the 0° (negative) relief angle mean for toolholding? A 0° (negative) relief angle indicates a neutral/negative rake geometry that is compatible with negative toolholders and provides secure seating and robust cutting for general turning tasks. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com