CNMG160608-RM5 WSM20S RM5 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade to secure long edge life and stable cutting in demanding applications; the RM5 chipbreaker and 0.8 mm corner radius further support predictable machining of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or contact the consultancy team for cutting-data recommendations. CNMG160608-RM5 WSM20S indexable turning insert — Tiger·tec Silver grade for stainless steels & superalloys (Walter Tools) The CNMG160608-RM5 WSM20S is an indexable turning insert engineered for heavy-duty and heat‑generating materials, offering a coated carbide grade and a geometry optimised for secure chip control and edge stability. Tiger·tec Silver coating for high wear resistance Optimised RM5 chipbreaker for secure chip control Negative 0° rake for stable cutting performance 0.8 mm corner radius for improved edge strength Durable performance for difficult-to-machine alloys The combination of the WSM20S grade and the Tiger·tec Silver coating delivers enhanced wear resistance and consistent edge behaviour when machining demanding materials. This coated carbide is formulated to withstand thermal and mechanical loads common in machining stainless steels and superalloys, so tool life becomes more predictable and unplanned tool changes are reduced. For production environments where repeatability matters, this insert supports process stability by reducing flank wear progression and maintaining a reliable cutting edge over extended cycles. Stable cutting and efficient chip control The integrated RM5 chipbreaker is designed to produce controllable chip forms under challenging cutting conditions, which lowers the risk of built-up edge and reduces interruption to automated turning cycles. Combined with the negative 0° rake, the geometry increases cutting-edge strength, improving resistance to shock and vibration during interrupted cuts. As a result, cycle times can be shortened and surface integrity is easier to maintain, offering a direct productivity advantage for serial machining of tougher materials. Flexible geometry that balances strength and finish The rhombus 80° configuration with a 0.8 mm corner radius provides a robust cutting edge while still enabling acceptable surface finishes in many turning operations. The insert’s format allows for stable axial and radial engagement, making it suitable where both material removal and component quality are required. Because the geometry emphasises edge robustness, finishing passes benefit from consistent contact pressure and reduced tendency for edge rounding, which supports tighter dimensional control in production. Practical integration into machining processes The designation and format of this CNMG insert follow common ISO conventions, simplifying inventory management and toolholder selection for established turning systems. The CNMG160608-RM5 WSM20S insert is intended for integration into standard CNMG toolholders and can be specified where a coated, process-secure solution is needed. For precise cutting parameters or tailored recommendations for specific stainless steels or superalloys, the technical team at Metav Werkzeuge can provide application data to match feed, speed and depth of cut to the grade and chipbreaker combination. Contact Metav Werkzeuge for availability of Walter Tools Tiger·tec Silver CNMG160608-RM5 WSM20S inserts and for customised cutting-data recommendations Technical data Article number: CNMG160608-RM5-WSM20S-WALTER Designation: CNMG160608-RM5 WSM20S Series: Tiger·tec Silver Manufacturer: Walter Tools Key figures Corner radius: 0.8 mm Insert size: 16 mm Free angle: 0° (negative) Thickness: 06 Special features Grade: WSM20S Chipbreaker: RM5 Shape: Rhombus 80° Applicable materials: S / M rostfreier_stahl_material_anwendung: yes FAQ Which materials can this insert machine effectively? The CNMG160608-RM5 WSM20S is suitable for stainless steels (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), reflecting the grade’s focus on thermal stability and secure chip formation. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and thermal protection, which helps to extend edge life and maintain cutting performance when machining tough, heat‑generating materials. How does the RM5 chipbreaker influence machining? The RM5 chipbreaker produces controlled chip shapes that reduce the risk of built‑up edge and improve evacuation, supporting uninterrupted turning cycles and consistent surface quality. What are the key geometric specifications to note? The insert has a rhombic 80° shape, a 0.8 mm corner radius and a negative 0° rake; these parameters combine to offer edge strength, good tool life and versatile engagement angles. Is this insert compatible with standard CNMG toolholders? Yes — the CNMG160608 format corresponds to standard CNMG insert geometries and is intended for use in matching CNMG toolholder systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CNMG160608-RM5 WSM30S WSM30S Wendeplatten - Walter Tools
Benefit from a combination of the Tiger·tec Silver coating, optimised RM5 chip control and a robust rhombic geometry to secure stable production and reduced tool changes; order the insert directly via Metav Werkzeuge or request consultancy for application-specific recommendations. CNMG160608-RM5 WSM30S Drehwendeschneidplatte – Turning insert with Tiger·tec Silver coating for heavy-duty machining by Walter Tools A CNMG160608-RM5 WSM30S turning insert designed for demanding turning operations in rostfreier Stahl and heat-resistant alloys, offering a rhombic 80° form and a strong negative relief for consistent edge stability Tiger·tec Silver coated grade WSM30S Optimised RM5 chipbreaker for stable chips Rhombic 80° geometry for secure cutting forces Suited to rostfreier Stahl and superalloys Reliable productivity for demanding materials The Tiger·tec Silver coating combined with the WSM30S grade was developed for machining difficult-to-cut alloys, delivering improved wear resistance and consistent edge life. The CNMG rhombic shape provides predictable chip flow and clamping security in standard toolholders, while the RM5 chipbreaker supports controlled swarf formation, reducing the risk of built-up edge and unplanned stoppages. These attributes translate directly into higher process reliability and fewer insert changes, contributing to smoother production cycles and more efficient machine utilisation. Maintained cutting-edge stability under thermal load A negative 0° relief and a 0.8 mm corner radius increase the insert’s mechanical robustness, which is particularly valuable when working with tough, heat-resistant materials that generate high contact temperatures. The coated carbide substrate resists abrasive and adhesive wear, maintaining a sharper cutting edge for longer intervals and enabling consistent component tolerances. In practice, this means fewer interventions for edge dressing and more predictable tool life, supporting cost-effective batch turning and repeatable quality in serial production. Application guidance and service support for confident selection Selection of the correct chipbreaker and geometry is essential; the RM5 version is geared towards medium to heavy cuts where stable chip formation is required. For operations in rostfreier Stahl or high-temperature alloys, pairing the insert’s features with appropriate cutting parameters reduces vibration and improves surface finish. Technical advice and cutting data are available from Metav Werkzeuge for process optimisation, and specifications such as plate thickness, relief angle and grade help engineering teams match the insert to lathe setup and workpiece material characteristics. Contact Metav Werkzeuge for expert advice on specifying Walter Tools CNMG160608-RM5 WSM30S inserts and aligning cutting data to the application Technical data Article number: CNMG160608-RM5-WSM30S-WALTER Name: Drehwendeschneidplatte CNMG160608-RM5 WSM30S Walter Tools Series: Tiger-tec Silver Grade: WSM30S Manufacturer: Walter Tools Facts Insert size: 16 Corner radius: 0.8 Thickness: 06 Relief angle: 0° (negative) Shape: Rhombus 80° Special features Coating: Tiger·tec Silver Chipbreaker: RM5 Substrate: coated carbide Sortenbeschreibung: coated carbide grade for heavy-duty machining Material compatibility: rostfreier Stahl; Superalloys/Titan (S / M) Tolerance class: M Execution: G FAQ What workpiece materials are recommended for this insert? The CNMG160608-RM5 WSM30S insert is recommended for rostfreier Stahl and heat-resistant superalloys; its coated grade supports stable cutting in these demanding groups. Which chipbreaker should be chosen for medium to heavy turning? The RM5 chipbreaker, as featured on this Walter Tools insert, is optimised for medium to heavy cutting conditions where stable chip control is required. How does the negative relief angle affect performance? A negative 0° relief increases edge strength and helps maintain a durable cutting edge under high mechanical and thermal loads during interrupted or heavy cuts. Can Metav Werkzeuge provide cutting data for this insert? Yes, Metav Werkzeuge offers application advice and cutting parameter recommendations for the CNMG160608-RM5 WSM30S insert to support machining setup and process optimisation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned exclusively for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CNMG160608-RP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade and a stable RP5 chipbreaker for consistent steel turning results; benefit from the rhombic 80° geometry and 0.8 mm corner radius for reproducible component quality. Order the CNMG160608-RP5 WPP10G directly via Metav Werkzeuge or ask our consultants if needed. CNMG160608-RP5 WPP10G — turning insert with Tiger·tec Gold coating, for steel, Walter Tools A CNMG160608-RP5 WPP10G turning insert designed for reliable steel turning, combining Tiger·tec Gold coating with a robust RP5 chipbreaker for stable chip control and long tool life. Tiger·tec Gold coating for wear resistance RP5 chipbreaker for controlled chip formation Rhombus 80° geometry for versatile turning 0.8 mm corner radius for robust edge strength Increased productivity through optimised cutting performance The coated carbide Tiger·tec Gold grade provides a balance between wear resistance and toughness that is tailored for machining steel (ISO P). The combination of a modern coating technology and the WPP10G substrate reduces flank wear under typical turning temperatures, which translates into longer tool life and fewer insert changes. With a clearly defined RP5 chipbreaker, the insert promotes predictable chip formation, improving cycle times and reducing interruption from chip-related issues. Consistent component quality with stable edge geometry The rhombus 80° shape and a 0.8 mm corner radius deliver repeatable cutting conditions and dimensional stability when turning shafts and shoulders. The negative rake (0°) geometry increases edge strength for interrupted cuts and heavier feed applications, reducing the risk of edge chipping. These geometric choices support a stable machining process that aids in maintaining surface quality and tolerances across production batches. Application-focused design for steel machining Engineered specifically for the machining of steel, this indexable insert combines a hard-wearing coating with geometry that copes well with typical chip formation and heat generation during turning. The RP5 chipbreaker is optimised for medium to heavy cutting conditions in steels, ensuring chips are broken reliably and evacuated efficiently. For operations where consistent metal removal and predictable wear are priorities, this insert offers a practical solution. Selection and integration with tooling systems The insert's designation reflects standard ISO-compatible geometry and makes it straightforward to match with conventional CNMG pockets and holders. Specifying the CNMG160608-RP5 WPP10G helps to ensure compatibility with existing toolholders and clamping systems designed for rhombic inserts. When selecting cutting parameters, favour stable feeds and depths that exploit the insert’s robust edge and chip control to maximise productivity and tool life. Contact Metav Werkzeuge for tailored cutting-data recommendations, availability and to discuss how the CNMG160608-RP5 WPP10G from Walter Tools can improve steel turning operations — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: CNMG160608-RP5-WPP10G-WALTER Designation: CNMG160608-RP5 WPP10G Product type: Turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Chipbreaker: RP5 Facts Insert size: 16 Thickness: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Shape: Rhombus 80° Tolerance class: M Special features Coating: Tiger·tec Gold Suitable for: Steel (ISO P) Cutting material: Coated carbide Geometry: Negative rake, robust edge Application focus: Reliable chip control and extended tool life FAQ Which materials is this insert suitable for? The CNMG160608-RP5 WPP10G insert from Walter Tools is specified for steel (ISO P) and is optimised for the thermal and chip-formation characteristics typical of unalloyed and alloyed steels. Is the insert coated and what are the benefits? Yes, the insert is part of the Tiger·tec Gold series; the coating increases wear resistance and helps maintain cutting-edge integrity during continuous turning operations with the CNMG160608-RP5 WPP10G. What cutting geometry ensures stable machining? The rhombic 80° form with a 0.8 mm corner radius and a negative 0° clearance angle provides a robust edge for interrupted cuts and heavier feeds, improving process stability for the Walter Tools insert. How does the RP5 chipbreaker affect production? The RP5 chipbreaker on this insert promotes controlled chip fragmentation and evacuation, reducing downtime from chip issues and contributing to consistent cycle times when machining steel. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com; info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Mark names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the referenced manufacturers. The offered item is an original, factory-new product of the manufacturer.
CNMG160608-RP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, a proven RP5 chipbreaker and a robust rhombic 80° geometry for consistently productive turning of steel — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG160608-RP5 WPP20G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools CNMG160608-RP5 WPP20G is a negative‑geometry turning insert designed for efficient steel machining in general turning applications Tiger·tec Gold coating for extended tool life RP5 chipbreaker for consistent chip control Rhombic 80° geometry for flexible turning Optimised for steel machining applications Engineered for productive steel turning The CNMG160608-RP5 WPP20G insert combines a coated cemented‑carbide substrate with Tiger·tec Gold technology to deliver extended tool life and predictable performance when machining steel. The negative 0° clearance and the rhombic 80° form provide a stable cutting edge under interrupted cuts and general turning operations. The grade WPP20G is balanced for wear resistance and versatility, which helps to reduce tool change frequency and supports steady production cycles. This results in fewer process interruptions and improved machining economy under typical shop conditions. Reliable chip control and improved surface quality The RP5 chipbreaker is designed to produce short, controllable chips across a wide range of feeds and depths of cut. Controlled chip form reduces the risk of tangling and tool damage, improving operator safety and reducing downtime for chip clearing. In addition, the combination of the chipbreaker geometry and the coated cutting edge supports consistent surface finishes, meaning less rework and fewer secondary operations. For manufacturers aiming to raise first‑pass yield, this insert offers a dependable route to more reproducible component quality. Practical selection guidance and application notes The insert’s geometry and size code reflect its suitability for medium to heavy general turning tasks: the inscribed circle corresponds to a 16 mm size and the corner radius is 0.8 mm, which is well suited to a balance of strength and edge definition. The plate thickness code indicates the standard geometry for this ISO designation. The WPP20G grade is formulated for steel machining according to ISO group P and is a coated carbide meant to handle the heat and chip formation typical for such materials. When selecting cutting parameters, follow machine and workpiece recommendations; for precise feeds, speeds and depths, Metav Werkzeuge can provide tailored data to match the workpiece and machine setup. Choose Walter Tools' Tiger·tec Gold grade for reliable steel turning — contact Metav Werkzeuge for specific cutting data, delivery options and fast technical advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data SKU: CNMG160608-RP5-WPP20G-WALTER Designation: CNMG160608-RP5 WPP20G Product type: Indexable turning insert Facts Insert size: 16 Plate thickness code: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP5 Substrate/coating: coated cemented carbide (Tiger·tec Gold technology) Material application: Steel (ISO group P) Designation code: CNMG160608-RP5 FAQ What does the designation CNMG160608‑RP5 indicate? The designation describes the insert geometry and size; CNMG indicates a rhombic 80° insert form, the numeric codes relate to inscribed circle and thickness conventions, and RP5 identifies the chipbreaker variant used on this Walter Tools turning insert. Which materials is the WPP20G grade intended for? The WPP20G grade is designed primarily for steel (ISO group P), providing a coated carbide formulation optimised for the thermal and chip‑formation conditions typical when machining steels. How does the RP5 chipbreaker benefit machining operations? The RP5 chipbreaker produces short, consistent chips to reduce chip entanglement, improve surface finish stability and lower the risk of tool damage, thereby supporting continuous production and easier chip handling. Is this insert suitable for interrupted cuts and rigid turning? Yes. The negative 0° clearance and robust rhombic form make this insert well suited to interrupted cuts and operations where a stronger cutting edge is required. How to obtain cutting parameters for the CNMG160608‑RP5 WPP20G? Cutting data depend on machine, workpiece and setup; Metav Werkzeuge offers application support and can supply recommended feeds and speeds for the CNMG160608‑RP5 WPP20G based on the specific job and equipment. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
CNMG160608-RP5 WPP30G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP30G grade delivers durable, coated carbide performance with controlled chip formation via the RP5 chipbreaker, ensuring productive turning of steel; order directly via Metav Werkzeuge or consult our technical team for application support. CNMG160608‑RP5 WPP30G – indexable turning insert for steel, Tiger·tec Gold (Walter Tools) The CNMG160608‑RP5 WPP30G is a rhombic 80° indexable turning insert designed for efficient machining of steel with a balanced wear‑resistance and toughness profile. Tiger·tec Gold coating for long tool life RP5 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning 0.8 mm corner radius for robust edge stability Maximise productivity with reliable chip control The Tiger·tec Gold WPP30G grade pairs a wear‑resistant coating with a tough substrate to balance life and edge security when machining steels (ISO group P). The RP5 chipbreaker is engineered to produce short, controllable chips across common turning operations, reducing downtime for chip handling and supporting uninterrupted production cycles. For workshop planners this means consistent cycle times and reduced tool changes, which directly improves process efficiency and throughput. The coated carbide construction provides abrasion resistance while the grade composition maintains edge integrity under variable cutting conditions. Consistent process results and straightforward integration With a rhombic 80° form and a 0° negative clearance geometry, the insert provides stable engagement and repeatable cutting behaviour in a range of turning setups. The corner radius of 0.8 mm offers a compromise between edge strength and surface finish capability, enabling effective roughing and stable finishing passes where required. The tolerance class M supports compatibility with standard toolholders and clamping systems; the insert's designation and geometry align with common CNMG toolholder designs, easing inventory management and tool change routines. This predictability supports high process reliability and reduces qualification effort when integrating the insert into existing tool families. Practical selection guidance and material scope The grade is formulated especially for steel applications and covers a broad spectrum of unalloyed and alloyed steels. The combination of chipbreaker, coating technology and insert geometry makes it suitable for general turning tasks where a balance of productivity and tool life is required. When selecting machining parameters, consider the RP5 chip control for medium to heavy depth of cut and moderate feed ranges; when surface quality is critical, use reduced feeds and light final passes to exploit the coated edge condition. If further clarification is needed regarding optimal cutting data or holder compatibility, Metav Werkzeuge provides application support and specification advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. For supply, technical matching and local availability of Walter Tools inserts such as the CNMG160608‑RP5 WPP30G, contact Metav Werkzeuge for application recommendations and delivery information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMG160608-RP5-WPP30G-WALTER Designation: CNMG160608‑RP5 WPP30G Series: Tiger·tec Gold Grade: WPP30G Chipbreaker: RP5 Core data Plate size: 16 mm Corner radius: 0.8 mm Plate thickness: 06 Clearance angle: 0° (negative) Tolerance class: M Special features Coated carbide (Tiger·tec Gold technology) RP5 chipbreaker for controlled chips Rhombic 80° insert shape Suited for steel (ISO group P) Negative geometry for secure cutting engagement FAQ What materials is this insert intended for? The CNMG160608‑RP5 WPP30G is formulated for machining steel (ISO group P) and offers a balance of wear resistance and toughness for common turning tasks. How does the RP5 chipbreaker affect machining? The RP5 chipbreaker on the CNMG160608‑RP5 promotes short, controllable chips, improving chip evacuation and supporting continuous production without frequent interruptions. Can this insert be used for roughing and finishing? Yes; the combination of the 0.8 mm corner radius and the Tiger·tec Gold coating on the WPP30G grade makes it suitable for productive roughing and stable finishing passes, with parameter adjustments for surface quality. Is the geometry compatible with standard CNMG toolholders? The rhombic 80° form and the CNMG designation align with standard CNMG holders; the tolerance class M supports reliable clamping and interchangeability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
CNMG160608-RP7 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the RP7 chipbreaker for reliable, high‑productivity steel turning; the robust Rhombic 80° form and 0.8 mm corner radius deliver consistent edge life and process security. Order directly via Metav Werkzeuge or consult our specialists for application support. CNMG160608-RP7 WPP10G — Walter Tools turning insert, Tiger‑tec Gold coated for steel A CNMG160608-RP7 WPP10G indexable turning insert engineered for productive ISO P (steel) machining, combining a Tiger‑tec Gold coating with the RP7 chipbreaker for stable cutting performance. Tiger‑tec Gold coated carbide Optimised for steel (ISO P) RP7 chipbreaker for stable chips Rhombic 80° with 0.8 mm corner radius Greater productivity through consistent edge life The coated carbide of the Tiger‑tec Gold series ensures improved tool life and predictable wear behaviour during steel machining. The WPP10G grade provides a balanced combination of hardness and toughness, designed to handle the typical heat and chip formation encountered when turning unalloyed and alloyed steel. As a result, cycle times remain stable and tool changes become more predictable, reducing unscheduled downtime and contributing to a smoother production flow. Stable chip control reduces interruptions Equipped with the RP7 chipbreaker, this insert promotes controlled chip formation and evacuation, which directly reduces the risk of entanglement and workpiece damage. The Rhombic 80° geometry with a 0.8 mm corner radius offers versatility for both finishing and light-medium turning operations, while the negative 0° clearance supports secure insert seating and rigidity. Altogether, these features support continuous machining processes with fewer interruptions and consistent surface quality. Simple selection and broad material coverage Designed specifically for ISO P materials, this insert is suitable for a wide range of steel grades commonly found in industry. The coated carbide construction makes it a reliable choice when process security and predictable performance are priorities. For engineers and shop managers assessing tooling options, the combination of geometry, chip control and the Tiger‑tec Gold coating creates a cost‑effective solution for many turning tasks without sacrificing finishing standards. Practical application advice and compatibility The insert fits holders that accept CNMG‑style plates and is available in the standard CNMG160608 size. When integrating the insert into an existing tooling set, consider the intended cut depth and feed to exploit the RP7 chipbreaker fully; shallow finishing cuts benefit from the 0.8 mm corner radius, while higher feeds can leverage the coating’s wear resistance. If there is uncertainty about the right holder or cutting data, Metav Werkzeuge provides application support and detailed machining recommendations. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools Tiger‑tec Gold CNMG160608‑RP7 WPP10G inserts for productive steel turning Technical data Article number: CNMG160608-RP7-WPP10G-WALTER Designation: CNMG160608-RP7 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Manufacturer: Walter Tools Facts Size: 16 Thickness: 06 Corner radius: 0.8 Free angle: 0° (negativ) Plate form: Rhombus 80° Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: RP7 Material application: Steel (ISO P) Execution: G Coated carbide construction FAQ Which materials can be machined with this insert? The CNMG160608‑RP7 WPP10G turning insert from Walter Tools is specified for ISO P applications and is optimised for machining a broad range of steel grades. What benefits does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the CNMG160608‑RP7 WPP10G enhances wear resistance and reduces flank wear, delivering longer tool life and more consistent performance in steel turning. How does the RP7 chipbreaker affect production? The RP7 chipbreaker on this insert produces compact, controlled chips, improving evacuation and lowering the likelihood of interruptions or surface damage during turning operations. Is the insert suitable for finishing and roughing? With a Rhombic 80° shape and 0.8 mm corner radius, the CNMG160608‑RP7 WPP10G is versatile for light to medium finishing and some roughing operations, depending on cutting data and toolholder rigidity. Which holders are compatible with this insert size? This CNMG160608‑RP7 WPP10G insert fits standard CNMG toolholders designed for the CNMG1606 size; verify holder type and clamping method to ensure correct seating and rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is original, brand‑new merchandise from the manufacturer.
CNMG160608-RP7 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a durable, high-performance insert that combines Tiger·tec Gold coating with an RP7 chipbreaker for consistent chip control and extended tool life; the geometry and edge preparation ensure reliable performance when machining Stahl, while Metav Werkzeuge can supply cutting data or quotations for direct procurement. CNMG160608-RP7 WPP20G turning insert — Tiger·tec Gold coated, RP7 chipbreaker, Walter Tools The CNMG160608-RP7 WPP20G is a rhombic 80° indexable turning insert with Tiger·tec Gold coated carbide, optimised for general-purpose and heavy-duty machining of Stahl. Tiger·tec Gold coated carbide Designed for Stahl machining Rhombic 80° geometry RP7 chipbreaker, 0° negative rake Faster, more consistent material removal through advanced coating and chip control The combination of the Tiger·tec Gold coating with a coated carbide substrate reduces flank wear and stabilises the cutting edge, resulting in longer tool life and more predictable component tolerances. The integrated RP7 chipbreaker improves chip formation and evacuation under the typical thermal and mechanical conditions encountered when machining Stahl, which helps maintain cycle times across repeated production runs. For operations where chip control and process stability drive productivity, this insert contributes to reduced rework and more efficient downstream processes. Robust geometry for demanding turning and interrupted cuts The rhombic 80° shape with a 0° negative rake provides a mechanically strong cutting edge suited to robust turning tasks, including intermittent cuts and tougher feed conditions. The 0.8 mm nose radius balances surface finish and edge strength: a larger nose radius increases load capacity and surface quality, while the specified radius still allows close turning tolerances. Tolerance class M supports consistent seating and reproducible tool offsets in toolholders that accept ISO CNMG inserts, facilitating swift tool changes and stable set-up times on production lines. Predictable results and simplified tool selection for steel applications Designated for the ISO P material group, this insert is tailored to handle unalloyed and alloyed Stahl, addressing common wear modes with a universal compromise between toughness and hardness. The standard ISO designation CNMG160608 and the serial technology provide straightforward replacement and tool inventory management, shortening procurement cycles. The modest list of core parameters — geometry, chipbreaker type and coating — enables process engineers to match the insert to machining tasks with minimal trial-and-error, supporting consistent surface finish and reproducible component quality. Contact Metav Werkzeuge for tailored cutting data, application advice and quotations for Walter Tools CNMG160608-RP7 WPP20G inserts; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: CNMG160608-RP7-WPP20G-WALTER Label: Drehwendeschneidplatte CNMG160608-RP7 WPP20G Walter Tools Product type: Turning insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: RP7 Geometry: Rhombic 80° Rake angle: 0° (negativ) Nose radius: 0.8 Size: 16 Thickness: 06 Tolerance class: M Facts Insert designation: CNMG160608 Nose radius: 0.8 mm Rake angle: 0° Size: 16 Thickness: 06 Tolerance: M Special features Tiger·tec Gold coating technology Coated carbide cutting material RP7 chipbreaker for controlled chips Suited to ISO P materials (Stahl) Robust edge for interrupted cuts Rhombic 80° form for versatile applications FAQ Which materials is this insert intended for? The CNMG160608-RP7 WPP20G insert is intended primarily for ISO P materials and is engineered specifically for machining Stahl, offering a balance between wear resistance and toughness. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP20G grade enhances wear resistance and temperature management, promoting extended cutting-edge life and more consistent machining when using the Walter Tools insert. How does the RP7 chipbreaker affect performance? The RP7 chipbreaker improves chip control and evacuation during turning of Stahl, reducing the risk of built-up edge and helping to maintain uninterrupted production cycles with predictable surface quality. Is this insert suitable for interrupted cuts and heavy feeds? Yes; the rhombic 80° geometry combined with a 0° negative rake and a 0.8 mm nose radius provides a mechanically strong edge suitable for intermittent cutting and heavier feed conditions. How is the insert identified for tool selection and inventory? Identification follows the ISO-style designation CNMG160608; the WPP20G grade and Tiger·tec Gold series help ensure consistent matching of insert performance to machining requirements. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. The mentioned brand is cited solely for explanation; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
CNMG160608-RP7 WPP30G WPP30G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the RP7 chipbreaker delivers reliable wear resistance and consistent chip control for steel machining; benefit from the robust rhombic 80° geometry and 0.8 mm corner radius for repeatable part quality. Order or request cutting data through Metav Werkzeuge for a swift integration into existing turning processes. CNMG160608-RP7 WPP30G turning indexable insert for steel by Walter Tools The CNMG160608-RP7 WPP30G is a coated carbide turning insert optimised for stable, productive machining of steel across a wide range of applications. Tiger·tec Gold coated carbide grade WPP30G RP7 chipbreaker for stable chip control 0° negative rake, rhombic 80° geometry 0.8 mm corner radius, 16 mm inscribed circle Consistent wear resistance for longer tool life The Tiger·tec Gold technology and the WPP30G grade provide a balanced coating system and substrate combination that reduces flank and crater wear under typical steel cutting conditions. This creates a predictable tool life, which supports planning and minimises unplanned tool changes. The RP7 chipbreaker is designed for controlled chip formation in steel, improving evacuation and reducing the risk of built-up edge. For shops seeking dependable repeatability, this results in fewer rejects and steadier cycle times. Geometry and edge form that ensure dimensional accuracy The rhombic 80° insert geometry and 0° negative rake combine to deliver robust cutting behaviour, especially in semi-finishing and general turning operations. A 0.8 mm corner radius helps smooth surface generation and enhances edge strength, while the 16 mm inscribed circle contributes to stable clamping and repeatable radial engagement. These geometric parameters reduce vibration sensitivity and support consistent tolerances, making the insert suitable where repeatability and surface finish are required without sacrificing productivity. Practical advantages in an industrial production environment Using a coated carbide insert with proven chip control reduces cycle interruptions and cleaning time at the machine. The RP7 chipbreaker supports continuous chip flow for typical steel grades, which lowers the likelihood of chip entanglement and improves operator safety and machine uptime. The tool grade addresses the thermal and mechanical demands of steel cutting, enabling efficient material removal rates while maintaining a reliable cutting edge. This combination yields a favourable cost-per-part ratio in longer production runs. Integrating the insert into the machining process The indexable design allows quick replacement and consistent orientation, which shortens downtime during tool changes. For best results, pair the insert with appropriate turning toolholders designed for CNMG geometry and follow recommended cutting parameters for steel at the chosen feed and depth of cut. If cutting data or parameter setting is required, Metav Werkzeuge can advise on optimised speeds, feeds and coolant strategies based on the intended application and machine capability. Contact Metav Werkzeuge for specific cutting data, availability and recommendations for integrating this Walter Tools Tiger·tec Gold insert into production processes Technical Data Article number: CNMG160608-RP7-WPP30G-WALTER SKU / Label: CNMG160608-RP7 WPP30G Walter Tools Product type: Turning indexable insert Series / Grade: Tiger·tec Gold / WPP30G Chipbreaker: RP7 Facts Inscribed circle (IC): 16 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness designation: 06 Shape: Rhombic 80° Tolerance class: M Special features Coating: Tiger·tec Gold coated carbide Base material: Coated carbide Suitable for: Steel machining (P group) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert is optimised for machining steel (ISO group P); the WPP30G grade and Tiger·tec Gold coating are tuned to the heat and chip formation typical for steel. Can the insert be used for finishing or roughing operations? With its 0.8 mm corner radius and robust geometry, the insert performs well in semi-finishing and general turning; select smaller radii or different grades for fine finishing demands. How does the RP7 chipbreaker affect machining? The RP7 chipbreaker promotes stable chip formation in steel, improving evacuation and reducing surface defects caused by uncontrolled chips. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG form and dimensions are compatible with holders designed for CNMG inserts; correct clamping and seat condition are essential for repeatable results. How are cutting parameters determined for this grade? Cutting data depend on machine rigidity, workpiece alloy and operation type; Metav Werkzeuge can provide recommended speeds, feeds and coolant strategies for the WPP30G grade. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG160612-MK5 WKK10S Wendeplatten - Walter Tools
Benefit from the combination of a wear‑resistant Tiger‑tec Silver grade and an optimised MK5 chipbreaker to maintain steady production in cast‑iron turning; order the CNMG160612-MK5 WKK10S turning indexable insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data. CNMG160612-MK5 WKK10S — Turning indexable insert, Tiger‑tec Silver for cast iron (Walter Tools) CNMG160612-MK5 WKK10S is a turning indexable insert designed for robust machining of cast iron, featuring a Tiger‑tec Silver coating and an MK5 chipbreaker for reliable chip control. Tiger‑tec Silver coating for high wear resistance Optimised MK5 chipbreaker for controlled chips Rhombic 80° form for versatile turning 1.2 mm corner radius for stable cutting edges Increased productivity for abrasive cast‑iron work The Tiger‑tec Silver grade WKK10S is formulated to resist the abrasive wear typical of cast iron machining, delivering consistent edge life under demanding conditions. The combination of a coated carbide substrate and the MK5 chipbreaker reduces the risk of built‑up edge and improves chip fragmentation, which leads to fewer interruptions for chip clearing and a more productive machining cycle. This makes the insert a pragmatic choice where surface finish and tool longevity must be balanced in repetitive turning tasks. Stable geometry for dependable process results A rhombic 80° plate form with a 1.2 mm corner radius and negative rake 0° geometry provides a predictable cutting behaviour and a robust cutting edge, suited to the short, brittle chips of cast materials. The insert's tolerance class M supports repeatable seating in standard toolholders, aiding process stability and interchangeability. These geometric characteristics translate into lower vibration, steady tool life and consistent component quality across production batches. Simple specification and efficient integration The CNMG format and the clear designation CNMG160612-MK5 WKK10S match common turret and toolholder systems, enabling straightforward inventory and rapid replacement during tool changes. The coated cemented‑carbide construction from the Tiger‑tec Silver series combines abrasion resistance with a degree of toughness for variable cast‑iron grades, helping to reduce secondary operations and downtime. For workshops seeking reproducible results, this insert supports standardisation of toolsets while maintaining cutting performance in daily turning applications. Contact Metav Werkzeuge to discuss Walter Tools inserts and cutting strategies for cast‑iron turning — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical advice and supply options. Technical data Article number: CNMG160612-MK5-WKK10S-WALTER Designation: CNMG160612-MK5 WKK10S Product type: Turning indexable insert Facts Plate form: Rhombus 80° Plate size: 16 Plate thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Silver Sort: WKK10S Chipbreaker: MK5 Coating: coated cemented carbide Suitable for: cast iron FAQ What material is the insert optimised for? The CNMG160612-MK5 WKK10S insert is optimised for machining cast iron, with a grade tuned to abrasive wear and short, breaking chips. Which chip control does the insert offer? The integrated MK5 chipbreaker on this Walter Tools insert improves chip fragmentation and evacuation in cast‑iron turning. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG designation indicates compatibility with standard toolholders designed for CNMG‑format turning inserts. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating enhances wear resistance and helps maintain cutting‑edge integrity under abrasive conditions typical of cast‑iron machining. What are the key dimensional features to check before ordering? Important dimensions for the CNMG160612-MK5 WKK10S include the rhombic 80° form, plate size 16, thickness 06 and corner radius 1.2 mm — verify these against the toolholder and intended application. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and brand names remain the property of their respective owners. The mentioned brand names and trademarks are used solely for explanatory purposes. The offered item is an original, brand‑new product from the manufacturer.
CNMG160612-MK5 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of a wear‑resistant Tiger‑tec Silver grade and a robust rhombic geometry to keep production moving with predictable tool life and consistent chip control; order the CNMG160612‑MK5 WKK20S directly via Metav Werkzeuge or consult the team for application advice. CNMG160612-MK5 WKK20S turning indexable insert — Rhombus 80°, Tiger‑tec Silver (Walter Tools) A CNMG160612‑MK5 WKK20S turning insert engineered for productive machining of cast iron components in serial and jobbing operations Tiger‑tec Silver coated for high wear resistance Designed for cast iron machining (ISO K) Rhombic 80° form with 1.2 mm corner radius Negative 0° rake for stable cutting performance High wear resistance for reliable cycle times The combination of the Tiger‑tec Silver coating and the WKK20S carbide substrate provides enhanced resistance to abrasive wear common in cast iron machining. This coating system balances hardness and toughness so that flank wear develops predictably rather than catastrophically; the result is extended tool life and fewer unplanned insert changes. For production planners this translates into steadier cycle times and reduced inspection overhead. Geometry that promotes stable cutting and chip control The Rhombus 80° geometry, paired with a 1.2 mm corner radius and a negative 0° rake, offers a stable cutting angle for interrupted cuts and cast surfaces. The MK5 chipbreaker is configured to produce short, controllable chips when turning cast iron, reducing the risk of chip entanglement and improving surface consistency. In practice, the robust edge geometry supports heavier depths of cut and conservative feed steps without sacrificing surface quality. Process benefits: productivity and consistent surface finish By matching grade and geometry to the demands of cast iron (ISO K), the insert delivers reproducible results across batch runs. The coated carbide substrate minimises adhesion and abrasive wear, thereby reducing the need for frequent edge dressing or uncontrolled tool changes. Fewer interruptions and consistent tool performance contribute to higher net machining time and predictable workpiece quality — essential for production lines where repeatability is critical. Practical application and integration into toolholders The CNMG indexable form fits standard turning toolholders that accept rhombic 80° inserts; its designation ensures compatible clamping and orientation. The negative rake design aids in vibration damping on older lathes or during interrupted cutting. For setup, ensure stable clamping, appropriate coolant strategy if used, and standard insert seating to exploit the MK5 chip control. Where mixed cast iron grades are processed, the grade’s universality helps maintain performance across different grey and nodular irons. Contact Metav Werkzeuge for tailored process recommendations on the Walter Tools CNMG160612‑MK5 WKK20S insert; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutting data and availability Technical Data Article number / SKU: CNMG160612-MK5-WKK20S-WALTER Designation: CNMG160612-MK5 WKK20S Product type: Turning indexable insert (Drehwendeschneidplatte) Facts Plate size: 16 Plate thickness: 06 Corner radius: 1.2 mm Free angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MK5 Application: cast iron (ISO K) Designation without grade: CNMG160612‑MK5 FAQ What materials is this insert suitable for? The CNMG160612‑MK5 WKK20S insert is designed primarily for cast iron (ISO K) applications and performs well on abrasive cast materials. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WKK20S grade reduces abrasive wear and helps maintain cutting edge integrity, extending the usable life of the insert. What role does the MK5 chipbreaker play? The MK5 chipbreaker produces short, controlled chips when turning cast iron, improving chip evacuation and reducing the risk of entanglement. Is the rhombic 80° form suitable for heavy cuts? Yes, the Rhombus 80° geometry combined with a 1.2 mm corner radius and negative 0° rake provides stability that supports heavier depths of cut in interrupted or roughing operations. Can this insert be used in standard CNMG toolholders? The CNMG‑format insert is compatible with standard toolholders that accept rhombic 80° CNMG inserts; correct clamping and seating are important for repeatable performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CNMG160612-MK5 WKP30S Wendeplatten - Walter Tools
Reliable machining performance and consistent chip control result from the combination of the Tiger·tec Silver coating and the MK5 chipbreaker, while the rhombic 80° geometry with a 1.2 mm corner radius ensures dimensional stability in steel and cast iron turning. Order the CNMG160612-MK5 WKP30S directly via Metav Werkzeuge or consult our specialists for cutting data and availability. CNMG160612-MK5 WKP30S — Indexable turning insert, Tiger·tec Silver coating (steel & cast iron) by Walter Tools The CNMG160612-MK5 WKP30S is an 80° rhombic indexable turning insert optimised for machining steel and cast iron in industrial turning applications Tiger·tec Silver coating for high process reliability WKP30S grade for steel and cast iron machining Rhombic 80° geometry with 0° negative rake MK5 chipbreaker for controlled chip formation Improved process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP30S carbide grade delivers a balance of wear resistance and heat management that is particularly effective for continuous production. Coated carbide reduces flank and crater wear by providing a thermally stable surface, which translates into more predictable tool life and fewer unplanned tool changes. This behaviour is especially important in batch production, where reproducible cutting performance lowers cycle-time variability and supports consistent component quality. Geometry and chip control that enhance surface finish and stability The insert’s rhombic 80° form and 0° (negative) free angle create a robust cutting edge that resists vibration and maintains geometry during interrupted cuts. A corner radius of 1.2 mm helps achieve improved surface integrity and dimensional stability at moderate radial depths. The MK5 chipbreaker promotes reliable chip segmentation and evacuation, reducing the risk of built-up edge and helping to maintain consistent surface finish over long runs. Predictable tool life and simplified planning for production shops Using a grade tuned for both ISO P (steel) and ISO K (cast iron) workpieces ensures versatility in mixed production environments. The coated grade and chipbreaker combination support longer usable life per edge, which reduces changeover frequency and contributes to lower cost per part. For process planning, recommend testing starting parameters from similar insert geometries in catalogue data and then adapting feeds and speeds for the specific machine–workpiece–fixture combination. If uncertainties arise regarding suitability or cutting data, Metav Werkzeuge provides application advice and cutting parameter support via email or phone. Application guidance and material suitability explained The insert is designated for machining steel and cast iron in accordance with the intended material groups (ISO P and ISO K). The designation and series indicate a catalogue- and geometry-dependent main application, so final cutting values may vary with workpiece alloy and hardness. The moderate corner radius and negative rake make the insert a solid choice for general turning tasks that demand robust edge protection and consistent chip breaking rather than ultra-fine finishing cuts. For catalogue-based recommendations and sample cutting data, consult the manufacturer specifications or Metav Werkzeuge’s technical team. Contact Metav Werkzeuge for tailored cutting data and supply of Walter Tools Tiger·tec Silver inserts: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: CNMG160612-MK5-WKP30S-WALTER Designation: CNMG160612-MK5 WKP30S Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP30S Execution: G Core figures Insert size: 16 mm Thickness: 6 mm Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Design & features Coating: Tiger·tec Silver Material: coated carbide (WKP30S) Chipbreaker: MK5 Plate form: Rhombic 80° Material suitability: steel (P), cast iron (K) Sort/series description: Tiger·tec Silver, WKP30S FAQ Which materials is this insert intended for? The CNMG160612-MK5 WKP30S insert from Walter Tools is intended for machining steel (ISO P) and cast iron (ISO K), with the grade and coating optimised for these material groups. What geometry and cutting-edge details does the insert provide? The insert features a rhombic 80° geometry, a 0° (negative) free angle and a 1.2 mm corner radius, which together support robust cutting and stable dimensional results. What does the WKP30S grade and Tiger·tec Silver coating offer? The WKP30S grade combined with the Tiger·tec Silver coating provides improved wear resistance and thermal stability, resulting in predictable tool life and consistent machining performance. How does the MK5 chipbreaker affect machining? The MK5 chipbreaker promotes controlled chip formation and evacuation, helping to reduce built-up edge and maintain surface finish during standard turning operations. How should the insert be specified when ordering? Reference the SKU CNMG160612-MK5-WKP30S-WALTER or the designation CNMG160612-MK5 WKP30S to ensure correct identification of the Tiger·tec Silver insert. Manufacturer: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. Markennamen und geschützte Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG160612-MM5 WMP20G MM5 Wendeplatten - Walter Tools
Take advantage of the combination of consistent edge life and reliable chip control to maintain throughput in stainless steel turning. The coated carbide grade and Tiger·tec Gold technology deliver stable performance under medium to robust conditions — order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. CNMG160612-MM5 WMP20G — Walter Tools indexable turning insert for stainless steel, Tiger·tec Gold CNMG160612-MM5 WMP20G is a rhombic 80° indexable turning insert designed for machining stainless steels in medium to robust turning operations Tiger·tec Gold coating for wear resistance Optimised WMP20G grade for stainless steel Rhombic 80° form with 1.2 mm corner radius MM5 chipbreaker for reliable chip control Consistent cutting performance for challenging stainless steel work The CNMG160612-MM5 WMP20G insert combines a coated-carbide substrate with the Tiger·tec Gold technology to address common issues when machining stainless steels, such as high ductility and a tendency to form built-up edge. The WMP20G grade is formulated to promote stable chip formation and to preserve the cutting edge under fluctuating thermal loads. This results in fewer interruptions for tool changes and a more predictable production rhythm. The rhombic geometry contributes to versatile approach angles, enabling process planners to favour either higher material removal or improved surface finish depending on the setup. Improved process reliability through chip control and edge stability A dedicated MM5 chipbreaker and the negative 0° relief angle reduce the risk of long, entangling chips and support secure evacuation in continuous turning. The 1.2 mm corner radius balances edge strength and surface integrity, helping to avoid premature edge chipping in medium to robust cuts. By using an insert that is optimised for these conditions, workshops can expect more consistent part quality and less rework. The combination of grade and chipformer also contributes to repeatable results when switching between similar stainless steel alloys, lowering scrap rates and downtime. Practical integration and benefits for production workflows The rhombic 80° insert form enables flexible insert indexing and economical use of the cutting edges. Its compatibility with common toolholder platforms makes retrofitting straightforward; the plate thickness and seat geometry ensure stable clamping and minimal vibration when secured correctly. Process engineers benefit from the trade-off between edge life and achievable feeds: the coated grade extends usable life without compromising cutting security in tougher stainless applications. When planning tool lists, include this insert where a balance of surface finish, tool life and chip control is required. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to discuss suitability for specific stainless steel turning applications Technical data SKU: CNMG160612-MM5-WMP20G-WALTER Article designation: CNMG160612-MM5 WMP20G Series: Tiger·tec Gold Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Special features Grade: WMP20G (coated carbide) Chipbreaker: MM5 Shape: Rhombus 80° Suitable for: stainless steels (material group M) FAQ What materials is this insert intended for? This insert is designed primarily for machining stainless steels; the WMP20G grade and Tiger·tec Gold coating support secure chip formation and edge life in those materials. How does the MM5 chipbreaker affect performance? The MM5 chipbreaker improves chip control and evacuation, reducing the risk of entangling chips and contributing to a more consistent surface finish with fewer interruptions. Can the rhombic 80° geometry be used for finishing passes? Yes, the rhombic 80° form with a 1.2 mm corner radius offers a balance between edge strength and surface quality suitable for both medium finishing and robust turning strategies. Is this insert compatible with standard CNMG toolholders? The insert follows the CNMG designation and is compatible with standard CNMG toolholders designed for rhombic 80° inserts, provided the clamping and seat meet the toolholder’s specifications. What advantage does Tiger·tec Gold technology provide? Tiger·tec Gold coating enhances wear resistance and thermal stability, which helps maintain edge integrity under the elevated temperatures typical when machining stainless steels. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CNMG160612-MM5 WMP20S Wendeplatten - Walter Tools
Reliable chip control and robust edge stability from the Tiger·tec Silver grade deliver consistent performance when machining rostfreien Stahl; the combination of the WMP20S cutting grade and the MM5 chipbreaker supports secure turning under medium to robust conditions. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMG160612-MM5 WMP20S — Indexable turning insert (Tiger·tec Silver) by Walter Tools The CNMG160612-MM5 WMP20S is an indexable turning insert designed for medium to robust machining of rostfreien Stahl, offering a rhombic 80° geometry and a 1.2 mm corner radius for stable edge life. Tiger·tec Silver coating for stable edges Optimised MM5 chipbreaker for secure chip control Rhombic 80° geometry for versatile turning 0° negative rake for robust cuts Corner radius 1.2 mm for improved strength Consistent performance for rostfreien Stahl machining The combination of the WMP20S grade and the Tiger·tec Silver technology is engineered to manage the specific challenges of rostfreien Stahl, where toughness and built-up edge tendencies demand reliable heat and chip management. The coated carbide substrate promotes a stable cutting edge under elevated temperatures, resulting in predictable tool life and fewer interruptions to production. This performance translates into reduced downtimes and more consistent component quality when turning shafts, sleeves or complex rotational parts in corrosive-resistant alloys. Coating and grade that extend cutting life The Tiger·tec Silver series employs a multi-layer coating system that improves wear resistance and reduces friction at the cutting zone. In practice, this means the insert resists flank wear and preserves edge geometry for longer intervals between indexings. The WMP20S grade is optimised for rostfreien Stahl, balancing toughness and hardness to avoid premature chipping while maintaining a sharp cutting edge—benefits that yield lower tooling consumption and more predictable process windows in serial production. Geometry tailored for reliable machining and chip control The rhombic 80° form with a 0° negative rake provides secure engagement in heavy or interrupted cuts and enhances edge robustness where mechanical stability is critical. The MM5 chipbreaker is tuned to produce short, controllable chips in common stainless-steel machining parameters, easing evacuation in both wet and dry conditions. A corner radius of 1.2 mm increases resistance to edge fracture, allowing slightly more aggressive feeds without sacrificing surface integrity or repeatability. Productivity advantages and process security Adopting this insert supports a balance of cutting performance and operational economy: optimised chip formation reduces machine stoppages, and the coated grade promotes longer tool life—both factors contributing to lower overall machining costs. Walter Tools’ focus on stable edge geometry and reproducible results helps to maintain consistent dimensional accuracy and surface finish across batches. For facilities aiming to improve cycle times while keeping scrap and rework to a minimum, this insert offers a practical route to greater throughput and enhanced process reliability. For application advice or to order Walter Tools CNMG160612-MM5 WMP20S inserts for rostfreien Stahl machining, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support. Technical Data SKU: CNMG160612-MM5-WMP20S-WALTER Designation: CNMG160612-MM5 WMP20S Manufacturer: Walter Tools Product type: Indexable turning insert Facts Insert size: 16 Thickness code: 06 Corner radius: 1.2 mm Included angle: 80° Free angle: 0° (negative) Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: MM5 Suitable for: rostfreien Stahl Geometry: Rhombus 80° (CNMG format) FAQ Which materials is this insert suitable for? The CNMG160612-MM5 WMP20S from Walter Tools is specifically developed for rostfreien Stahl and performs well under medium to robust machining conditions. What does the Tiger·tec Silver designation mean? Tiger·tec Silver denotes a multi-layer coating technology combined with a coated carbide substrate that enhances wear resistance and reduces friction at the cutting edge, improving tool life in demanding applications. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker creates short, controlled chips suited to stainless-steel turning, aiding evacuation and reducing the risk of entanglement or surface damage. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake increases mechanical edge strength and is advantageous for interrupted or robust cutting conditions where stability is essential. What is the corner radius and why is it important? The insert has a corner radius of 1.2 mm, which improves edge strength and allows for slightly higher feed rates without compromising surface finish or repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
CNMG160612-MM5 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Gold coated cutting grade and the stable MM5 chipbreaker for consistent stainless‑steel performance; the robust rhombic 80° geometry with a 1.2 mm corner radius ensures reliable edge strength and repeatable results. Order the CNMG160612‑MM5 WMP30G directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CNMG160612‑MM5 WMP30G – Indexable turning insert for stainless steel (Tiger‑tec Gold) by Walter Tools The CNMG160612‑MM5 WMP30G is an indexable turning insert designed for machining stainless steel under medium to robust cutting conditions, combining a coated carbide grade with a dedicated chipbreaker for secure chip control. Tiger‑tec Gold coated carbide grade WMP30G Optimised for stainless steel machining M Rhombic 80° geometry, 0° negative rake 1.2 mm corner radius with MM5 chipbreaker Proven cutting grade for demanding stainless‑steel work The combination of Tiger‑tec Gold coating and the WMP30G formulation delivers enhanced thermal and wear resistance when machining stainless steel (ISO group M). The coating supports stable cutting edges under elevated temperatures, reducing the tendency for built‑up edge and enabling longer, more predictable tool life. For operations where consistent chip formation and surface consistency matter, this cutting grade offers a measurable improvement in process stability and component quality. Geometry and chip control that support robust turning A rhombic 80° geometry and a 0° (negative) relief provide enhanced edge strength for occasional heavier cuts, while the MM5 chipbreaker is engineered to form short, controllable chips in ductile stainless alloys. The 1.2 mm corner radius increases resistance to edge chipping during interrupted cuts and supports better dimensional repeatability. In practice, these design choices reduce rework and machine idle time by decreasing insert change frequency and minimising scrap. Practical benefits for toolrooms and production lines As an indexable insert in standard CNMG format, this grade integrates easily into common toolholders and tool‑change routines, lowering setup complexity. The solid, coated carbide construction ensures consistent performance across batches, helping to standardise cycle times and surface finish. Combined with supplier expertise from Walter Tools and distribution via Metav Werkzeuge, the insert supports predictable throughput and efficient inventory management for production environments. For reliable stainless‑steel turning choose the Walter Tools CNMG160612‑MM5 WMP30G through Metav Werkzeuge; contact Metav Werkzeuge for technical matching and supply at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: CNMG160612-MM5-WMP30G-WALTER Article designation: CNMG160612‑MM5 WMP30G Product type: Indexable turning insert Manufacturer: Walter Tools Core specifications Insert size: 16 mm Thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Chipbreaker: MM5 Materials & features Grade / sort: WMP30G Series: Tiger‑tec Gold Target material group: M (stainless steel) Execution: G Tolerance class: M FAQ What alloys is this insert optimised for? The CNMG160612‑MM5 WMP30G is optimised for stainless steel (ISO group M) and is formulated to manage the heat and ductility typical of those alloys. How does the MM5 chipbreaker affect chip formation? The MM5 chipbreaker produces short, controlled chips in ductile materials, improving chip evacuation and reducing the risk of surface damage during turning with the Walter Tools insert. Can this insert be used for finishing passes? Yes; the combination of the Tiger‑tec Gold coating and the 1.2 mm corner radius provides a balance of edge strength and surface quality suitable for many finishing operations on stainless steel. What does the 0° (negative) relief mean for machining? A 0° negative relief increases edge robustness and is beneficial for interrupted cuts or conditions requiring higher stability, making the insert well suited to medium to robust cutting situations. Is the CNMG format compatible with standard holders? The CNMG form is a standard indexable insert format and is compatible with most holders designed for rhombic 80° CNMG inserts, enabling straightforward integration into existing tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG160612-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the MM5 chipbreaker for secure chip control and extended edge life; the rhombic 80° geometry with a 0° negative rake and 1.2 mm corner radius delivers robust performance in machining stainless steels and heat‑resistant superalloys. Order or request consultancy through Metav Werkzeuge for tailored cutting data and fast delivery. CNMG160612‑MM5 WSM10S — Rhombic 80° indexable insert, Tiger‑tec Silver coating (Walter Tools) The CNMG160612‑MM5 WSM10S is a rhombic 80° indexable insert engineered for turning operations in stainless steels and heat‑resistant superalloys, combining a Tiger‑tec Silver coated carbide grade with an MM5 chipbreaker for improved process stability. Tiger‑tec Silver coating for stable cutting Optimised MM5 chipbreaker for secure chip control Rhombic 80° geometry for versatile turning Ideal for stainless steels and superalloys High‑performance cutting with coated carbide for difficult alloys The Tiger‑tec Silver coating and the WSM10S grade form a wear‑resistant system designed for machining materials that tend to work harden and generate heat. The combination of a coated cemented carbide substrate and an advanced top coating increases thermal resistance and reduces flank wear, which translates into longer tool life and fewer indexings. For shops processing a high share of austenitic stainless steels or Inconel‑type alloys, this results in more consistent component quality and fewer interruptions for tool changes. Geometry designed for edge stability and predictable chips The rhombic 80° shape with a 0° negative rake provides a robust cutting edge that tolerates interrupted cuts and varied depth of cut, while the corner radius of 1.2 mm supports stable edge formation and improved surface finish. The MM5 chipbreaker is tuned for the grade and target materials to promote short, controllable chips under moderate to heavy turning conditions, reducing the risk of built‑up edge and enhancing machining reliability in serial production. Process efficiency and repeatable results Selecting this insert supports higher material removal rates without sacrificing surface integrity thanks to the grade’s balance between toughness and wear resistance. The coated carbide technology helps maintain a stable cutting edge across extended runs, which contributes to reduced cycle times and predictable tool replacement intervals. For production environments, this equates to improved throughput and reproducible part quality — advantages that align with the productivity expectations for modern workshops. Practical handling and application notes The insert is furnished in the CNMG format for standard turning toolholders and is suited to both roughing and finishing passes depending on parameter choice and holder rigidity. For best results with stainless steels and heat‑resistant superalloys, combination of appropriate cutting speed, feed, and coolant strategy is recommended to manage heat and chip evacuation. If additional cutting data or matching toolholder recommendations are required, Metav Werkzeuge provides application support and cutting parameter guidance. Contact Metav Werkzeuge for tailored cutting data and to secure the Walter Tools Tiger‑tec Silver CNMG160612‑MM5 WSM10S insert for high‑duty stainless steel machining Technical Data Article number: CNMG160612‑MM5‑WSM10S‑WALTER Name: CNMG160612‑MM5 WSM10S indexable insert Manufacturer: Walter Tools Facts Insert size: 16 Corner radius: 1.2 mm Relief angle: 0° (negative) Tolerance class: M Thickness code: 06 Special features Coating: Tiger‑tec Silver Grade: WSM10S Chipbreaker: MM5 Geometry: Rhombic 80° Applicable material groups: S / M (superalloys, titanium; stainless steels) Suitable for: stainless steels and heat‑resistant superalloys FAQ What materials is this insert suitable for? The CNMG160612‑MM5 WSM10S insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys and titanium alloys (ISO group S) when using appropriate cutting data. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WSM10S grade enhances thermal resistance and wear performance, which helps maintain a stable cutting edge and extends tool life in demanding turning operations. Can the MM5 chipbreaker handle interrupted cuts? Yes, the MM5 chipbreaker is optimised for secure chip formation and works with the rhombic geometry and 0° negative rake to tolerate interrupted and variable cutting conditions. Is this insert compatible with standard CNMG toolholders? The CNMG160612‑MM5 format fits standard CNMG toolholders; toolholder rigidity and correct clamping are important to exploit the insert’s edge stability and achieve repeatable results. Where can further cutting parameters or application support be obtained? Detailed cutting data and application guidance for this Walter Tools insert are available from Metav Werkzeuge; tailored recommendations improve process stability and component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision metalworking tools and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanation; there is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
CNMG160612-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of the WSM20S Tiger·tec Silver coating and the MM5 chipbreaker for stable chip formation and extended edge life; the 1.2 mm corner radius and 0° negative rake deliver robust cutting performance in stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG160612-MM5 WSM20S turning insert, Tiger·tec Silver – engineered for stainless steel and superalloys | Walter Tools The CNMG160612-MM5 WSM20S is a negative‑rake, 80° rhombic turning insert designed for heavy and heat‑generating materials such as stainless steels and superalloys Tiger·tec Silver coated WSM20S grade Optimised for stainless steel and superalloys 0° negative rake for robust cutting 1.2 mm corner radius for edge stability High thermal stability and longer tool life for demanding alloys The Tiger·tec Silver coating combined with the WSM20S carbide substrate improves wear resistance and thermal stability, helping to maintain cutting edge integrity under high temperatures. For materials that tend to work‑harden or generate heat—notably stainless steels and superalloys—this surface technology supports predictable wear behaviour and fewer index changes. In practice this means longer intervals between insert changes and more consistent part quality, which contributes directly to improved process efficiency and lower overall machining costs. Geometry and edge design that prioritise process security The rhombic 80° shape with a 0° negative rake produces a robust cutting edge suited to interrupted cuts and heavier feeds; the 1.2 mm corner radius increases edge strength and allows for stable chip formation at higher feeds. The integrated MM5 chipbreaker controls chips on difficult‑to‑machine alloys, reducing the risk of entanglement and aiding evacuation. Translating these features into operational benefit: fewer stoppages, reduced secondary operations to clear chips, and more reliable cycle times on production runs. Application guidance for efficient implementation The insert is intended for turning operations in which material ductility and heat generation can compromise edge life. The designation CNMG160612‑MM5 indicates the geometry and chipbreaker combination suitable for both roughing and semi‑finishing, depending on insert seat and machine rigidity. When machining rostfreier Stahl or heat‑resistant alloys, modest increases in coolant flow and appropriate feed selection preserve the Tiger·tec Silver coating performance. For tailored cutting data and holder recommendations, refer to technical sheets or seek advice from Metav Werkzeuge to match the insert to the specific turning task. For tailored application support or rapid procurement of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) and request CNMG160612‑MM5 WSM20S to ensure the optimal grade and geometry for the job at hand Technical data SKU: CNMG160612-MM5-WSM20S-WALTER Label: Drehwendeschneidplatte CNMG160612-MM5 WSM20S Walter Tools Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Numbers / Core technical data Plate size: 16 Thickness: 06 Corner radius: 1,2 mm Relief angle: 0° (negativ) Tolerance class: M Designs / Special features Plate shape: Rhombus 80° Chipbreaker: MM5 Material applicability: S / M Execution: G ISO designation: CNMG160612-MM5 WSM20S UID: CNMG160612-MM5-WSM20S-WALTER FAQ Which materials is this insert best suited for? The CNMG160612‑MM5 WSM20S is formulated for rostfreie Stähle and heat‑resistant superalloys (groups M and S) where thermal stability and controlled chip formation are critical. How does the MM5 chipbreaker influence performance? The MM5 chipbreaker on this Walter Tools insert improves chip control for ductile and work‑hardening materials, aiding evacuation and reducing the risk of chip rework or surface damage. Can this geometry be used for both roughing and finishing? Yes, the 80° rhombic shape with a 1.2 mm corner radius and negative rake provides robustness for roughing and consistent edge life for semi‑finishing; final surface requirements determine the best feed and depth settings. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances wear resistance and heat tolerance, which helps maintain cutting edge geometry under elevated temperatures common when machining stainless steels and superalloys. Is the CNMG160612‑MM5 WSM20S compatible with standard CNMG toolholders? The ISO designation CNMG160612‑MM5 indicates standard interface geometry compatible with CNMG holders; ensure the holder matches the insert thickness and seat type for optimal clamping and runout. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer Walter Tools.
CNMG160612-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
The combination of the Tiger‑tec Silver coating and the WSM30S grade ensures stable cutting edges and reliable performance on stainless steels and heat‑resistant superalloys; this reduces unplanned downtime and supports consistent surface finish. Order directly through Metav Werkzeuge or request specialised advice from the consultants for application‑specific recommendations. CNMG160612-MM5 WSM30S indexable turning insert – Tiger‑tec Silver for stainless steels (Walter Tools) The CNMG160612-MM5 WSM30S is a rhombic 80° indexable turning insert with Tiger‑tec Silver coating, designed for productive machining of stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coated grade WSM30S Suitable for stainless steels and superalloys Rhombic 80° geometry, 1.2 mm corner radius MM5 chipbreaker for stable chip control High performance grade for demanding materials The WSM30S grade, part of the Tiger‑tec Silver family, is a coated carbide designed for sustained performance when machining challenging alloys. Its formulation promotes stable chip formation under thermal stress and supports a durable cutting edge, which directly translates into longer tool life and fewer index changes. For operations that prioritise throughput and repeatable results, the combination of the coated grade and the insert geometry delivers measurable improvements in process security and surface integrity. Geometry and chip control that protect the workpiece and tool The rhombic 80° shape with a 1.2 mm corner radius and the MM5 chipbreaker balance strength and surface quality. The small but robust corner radius helps maintain a consistent cutting line and improves resistance to mechanical shock, while the MM5 chipbreaker is optimised to control chips from ductile, heat‑generating materials. The 0° negative rake geometry increases edge stability in interrupted cuts and heavy feeds, reducing the risk of build‑up and extending the interval between regrinds or index changes. These features together support a smoother machining cycle and improved component finish. Practical benefits for the workshop and process planners Chosen for tasks on stainless steels and heat‑resistant superalloys, this insert supports high process reliability and predictable tool behaviour in series production and single‑part machining alike. The insert’s designation and tolerance class minimise setup ambiguity, easing tool changeover and stock management. For engineering departments seeking to standardise inserts across multiple machines, the CNMG160612-MM5 WSM30S offers consistency in edge life and chip control that helps reduce scrap rates and stabilise cycle times. For specific applications or cutting parameter recommendations, Metav Werkzeuge provides technical consultation to align cutting data with machine capability. Contact Metav Werkzeuge for availability and tailored cutting data for the Walter Tools CNMG160612-MM5 WSM30S insert; technical advisors can support selection and integration into existing tool systems. Technical Data Article number: CNMG160612-MM5-WSM30S-WALTER Designation: CNMG160612-MM5 WSM30S Product type: indexable turning insert Series: Tiger‑tec Silver Manufacturer: Walter Tools Numbers / Core Technical Data Insert size: 16 mm Corner radius: 1.2 mm Thickness code: 06 Rake angle: 0° (negative) Tolerance class: M Chipbreaker: MM5 Special features Coating/grade: WSM30S, Tiger‑tec Silver, coated carbide Geometry: Rhombus 80° Execution: G Material suitability: S / M (superalloys and stainless steels) Series description: suited for difficult‑to‑cut materials and, depending on geometry, stainless steels UID: CNMG160612-MM5-WSM30S-WALTER FAQ Which materials are suitable for this insert? The CNMG160612-MM5 WSM30S insert from Walter Tools is intended for stainless steels (ISO M) and heat‑resistant superalloys (ISO S), offering thermal resistance and edge stability for these groups. What is the purpose of the MM5 chipbreaker? The MM5 chipbreaker on the CNMG160612-MM5 WSM30S controls chip shape and evacuation when machining ductile, heat‑sensitive materials, helping to avoid entanglement and improving surface finish. How is the ISO designation CNMG160612 interpreted? The CNMG160612 part of the CNMG160612-MM5 WSM30S designation indicates the insert’s standardised geometry and size; for exact decoding of each position in the code, refer to the Walter Tools technical datasheet for the CNMG series. Will this insert fit standard CNMG tool holders? The CNMG160612-MM5 WSM30S is an indexable turning insert in CNMG form and is compatible with tool holders and clamping systems specified for CNMG inserts, subject to correct seating and clamping specifications. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver on the WSM30S grade enhances wear resistance and edge stability, which supports higher process security and longer tool life when machining demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only and imply no affiliation between Metav Werkzeuge and the named brands. The offered article is an original, brand‑new product of the manufacturer Walter Tools. Gestützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer.
CNMG160612-MP5 WPP05G WPP05G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the MP5 chipbreaker ensures extended tool life and consistent chip control during steel turning; the robust rhombic 80° form with a 1.2 mm nose radius supports productive, repeatable machining. Order directly via Metav Werkzeuge or request application advice from our consultants. CNMG160612-MP5 WPP05G indexable turning insert — Tiger·tec Gold for steel — Walter Tools The CNMG160612-MP5 WPP05G is an indexable turning insert designed for productive steel machining, combining Tiger·tec Gold coating with the MP5 chipbreaker for reliable chip control. MP5 chipbreaker for stable chip control Tiger·tec Gold coating for long tool life CNMG 16 insert with 1.2 mm nose radius Negative 0° rake for heavy-duty turning Higher productivity through coating and geometry The Tiger·tec Gold technology delivers a coated carbide surface that reduces flank wear and extends tool life under cyclic thermal and mechanical loads. In combination with the MP5 chipbreaker, the insert achieves controlled chip formation on a wide range of steel grades, which lowers the need for frequent tool changes and minimises stoppages. This translates into measurable cycle-time improvements and a more predictable production flow. The geometry is engineered to balance cutting-edge strength and thermal resistance, so stable performance is maintained even in interrupted cuts. Predictable surface finish and machining stability A 1.2 mm nose radius and the rhombic 80° format provide a compromise between strength and finish quality: the tip radius supports edge stability during heavier passes while the insert form permits flexible approach angles for a variety of turning operations. The negative 0° rake increases cutting edge robustness, making the insert suited to heavier material engagement where force absorption and repeatability are priorities. As a result, consistent part-to-part surface quality is achieved with fewer rework cycles, supporting higher first-pass yield. Application benefits and process integration Specified for use on steel according to ISO designations, the cutting-grade composition WPP05G is tailored to the thermal and chip-forming behaviour typical of steel machining. The CNMG160612-MP5 WPP05G insert is compatible with standard CNMG toolholders and provides an economical balance of wear resistance and toughness, meaning longer intervals between indexings. For shops aiming to standardise tooling, the insert’s toleranced form class M ensures interchangeability and reliable clamping accuracy, which supports automated or manual tool change routines and reduces set-up time. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools inserts or to arrange a technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMG160612-MP5-WPP05G-WALTER Designation: CNMG160612-MP5 WPP05G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Insert size: 16 mm Thickness code: 06 Nose radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP05G (coated carbide) Chipbreaker: MP5 Insert form: Rhombus 80° Execution: G Material group suitability: Steel (P) ISO designation: CNMG160612-MP5 WPP05G FAQ What materials is this insert intended for? The insert is designed for machining steel grades; the WPP05G grade and Tiger·tec Gold coating are optimised for the thermal and chip-forming behaviour of steel. How does the MP5 chipbreaker improve production? The MP5 chipbreaker produces short, controlled chips in a broad range of cutting conditions, reducing entanglements and easing chip evacuation while supporting uninterrupted machining cycles. Is this insert suitable for heavy roughing operations? Yes, the negative 0° rake and robust edge geometry make the insert appropriate for heavy-duty turning where edge strength and stability are required. Which toolholder types accept this insert? The CNMG form is compatible with standard CNMG toolholders; ensure correct clamping and seat condition to maintain tolerance class M repeatability. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal stability, extending tool life and giving more consistent machining performance across production batches. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG160612-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Die Kombination aus der bewährten Tiger‑tec Gold‑Technologie und dem MP5‑Spanformer sorgt für zuverlässige Spanbildung, hohe Standzeiten und eine wirtschaftliche Bearbeitung von Stahl. Bestellungen und technische Rückfragen sind direkt über Metav Werkzeuge möglich; beratende Unterstützung wird auf Wunsch angeboten. CNMG160612-MP5 WPP10G indexable turning insert for steel, Tiger‑tec Gold, MP5 – Walter Tools CNMG160612-MP5 WPP10G is a coated carbide indexable insert designed for robust and economical turning of steel components Tiger‑tec Gold coating for extended tool life MP5 chipbreaker for controlled chip formation Rhombic 80° form for versatile turning 1.2 mm corner radius, negative 0° relief Longer tool life through proven coating technology Die Tiger‑tec Gold‑Beschichtung kombiniert Härte und Zähigkeit, wodurch die Standzeit bei typischen Stahl‑Zerspanungsbedingungen deutlich steigt. Die Sorte WPP10G ist eine beschichtete Hartmetallsorte, die speziell für ISO‑P‑Werkstoffe ausgelegt ist; dadurch wird die Wärmeentwicklung und Spanbildung kontrolliert. Für die Produktion bedeutet dies weniger Werkzeugwechsel und konsistentere Bearbeitungszeiten, was die Gesamtanlageneffektivität erhöht und Stillstandszeiten reduziert. Zusätzlich verringert die Beschichtung die Kantenverschleißrate bei Serien‑ und Schruppoperationen. Predictable chips and secure machining with MP5 geometry Der integrierte MP5‑Spanformer sorgt für gleichmässige und kontrollierte Spanbildung bei verschiedenen Schnitttiefen und Schnittgeschwindigkeiten, wodurch der Spanfluss und die Maschinenverfügbarkeit optimiert werden. Die negative Ausführung mit 0° Freiwinkel bietet zusätzliche Stabilität bei Einspannungen und ist vorteilhaft bei unterbrochenem Schnitt oder beim Schruppen. Dadurch sinkt das Risiko von Werkzeugbruch und die Prozesssicherheit steigt, was zu verlässlicheren Bearbeitungsergebnissen führt. Robust geometry for versatile turning tasks on steel Die Rhombic 80°‑Form und der 1.2 mm Eckenradius bieten eine gute Balance zwischen Schnittfestigkeit und Schneidkantenstabilität; das Resultat sind saubere Schnitte bei gleichzeitig hoher Belastbarkeit der Schneidkante. Die Einordnung in die Toleranzklasse M und die Ausführung G stehen für reproduzierbare Abmessungen und robuste Performance in der Serienfertigung. Diese Geometriekombination eignet sich besonders für tragfähige Halterungen und gängige Drehapplikationen auf Stahlwerkstoffen nach ISO P. For detailed application advice, toolholder recommendations or to secure delivery of CNMG160612‑MP5 WPP10G through Metav Werkzeuge, contact Metav Werkzeuge for technical consultation and prompt processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical overview Article number: CNMG160612-MP5-WPP10G-WALTER Label: Drehwendeschneidplatte CNMG160612-MP5 WPP10G Walter Tools Manufacturer: Walter Tools Core data Insert size: 16 mm Insert thickness: 06 Corner radius: 1.2 mm Relief angle: 0° (negative) Geometry: Rhombic 80° Tolerance class: M Special features Coating/series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: MP5 Execution: G Material group: P (suitable for steel) ISO designation: CNMG160612-MP5 WPP10G FAQ What materials is this insert suited for? The CNMG160612‑MP5 WPP10G is designed for ISO P materials; it is intended for turning various unalloyed and alloyed steels. How does the MP5 chipbreaker improve machining? The MP5 chipbreaker on the CNMG160612‑MP5 WPP10G promotes controlled chip formation and stable evacuation, reducing interruptions and improving surface consistency. Can this insert handle interrupted cuts or heavy roughing? The negative 0° relief and robust rhombic geometry give the insert increased edge strength, making it suitable for interrupted cuts and heavy stock removal on steel. Which toolholders are compatible with this ISO designation? Toolholders designed for CNMG‑type inserts will be compatible; the CNMG160612‑MP5 WPP10G fits standard CNMG pockets with appropriate clamping and seat geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; www.walter-tools.com The Walter AG (market appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned here for explanatory purposes only. The offered item is an original, factory‑new product of the manufacturer.
CNMG160612-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade for durable performance in steel turning; the MP5 chipbreaker and 1.2 mm corner radius ensure reliable chip control and consistent surface finish. Order directly via Metav Werkzeuge or consult our technical team for process optimisation. CNMG160612-MP5 WPP20G — Drehwendeschneidplatte, Tiger·tec Gold coated carbide (for steel) — Walter Tools The CNMG160612-MP5 WPP20G is a rhombic 80° turning insert designed for stable chip formation and productive machining of steels in general turning applications. CNMG160612-MP5 WPP20G turning insert Tiger·tec Gold coated, wear-resistant grade MP5 chipbreaker for controlled chip formation 1.2 mm corner radius, rhombic 80° geometry Improved tool life and cost-efficiency for steel machining The coated-carbide Tiger·tec Gold grade WPP20G provides a balance of wear resistance and toughness that reduces tool changes during batch production. Because the grade is optimised for the machining behaviour of steels (ISO group P), the insert maintains a stable cutting edge under typical thermal and mechanical loads, leading to fewer interruptions and a lower total cutting-cost-per-part. This performance advantage is particularly relevant for series production and contract turning where predictable wear and repeatable results matter. The combination of coating technology and substrate composition helps to delay flank and crater wear, translating directly into longer useful life. Consistent surface quality through engineered chip control The MP5 chipbreaker and the rhombic 80° geometry are engineered to shape chips reliably and reduce vibration in many turning operations. The modest 1.2 mm corner radius smooths transitions on external profiles and shoulders, improving surface finish without sacrificing edge strength. Controlled chip formation reduces the risk of entanglement and the need for manual chip clearing, which supports a safer, more efficient shopfloor environment. Where surface integrity and repeatable part dimensions are priorities, this insert offers tangible process control benefits. Secure seating and predictable repeatability for set-ups Produced to tolerance class M, this CNMG-format insert ensures dimensional consistency and secure clamping in standard toolholders. The designation indicates the insert family and chipbreaker combination, simplifying inventory management and tool change procedures for production teams. The specified 0° negative rake provides a robust cutting edge suitable for a range of cutting conditions, particularly where a stable edge is preferred over aggressive cutting geometry. The standardised form and thickness code facilitate quick indexing and consistent performance across multiple tool stations. Broad applicability in general turning and finishing operations Optimised for unalloyed and alloyed steels, this indexable insert supports a wide spectrum of turning tasks from roughing to finishing, depending on machining parameters and holder rigidity. The coated carbide construction gives a degree of versatility across different feed rates and depths of cut, while the MP5 chipbreaker enables reliable chip control in continuous turning. For workshop planners and process engineers seeking a single grade to cover many steel applications, this insert reduces complexity in tool selection and simplifies spare-part stocking. Choose Walter Tools Tiger·tec Gold grade inserts for robust steel turning and contact Metav Werkzeuge for application advice or to discuss suitable holders and cutting parameters at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CNMG160612-MP5-WPP20G-WALTER Designation: CNMG160612-MP5 WPP20G Product type: Drehwendeschneidplatte Series: Tiger·tec Gold Grade: WPP20G Manufacturer: Walter Tools Core specifications Size: 16 Thickness code: 06 Corner radius: 1.2 mm Rake/clearance: 0° (negative) Geometry: Rhombus 80° Tolerance class: M Materials & features Coating / substrate: Tiger·tec Gold (coated carbide) Chipbreaker: MP5 Material application: Steel (ISO group P) Plate form: Rhombic 80° Designation code: CNMG160612-MP5 FAQ What steels is this insert suitable for? The CNMG160612-MP5 WPP20G insert with WPP20G grade is optimised for ISO group P steels, covering unalloyed and alloyed steels commonly used in turning. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker on this Walter Tools insert promotes controlled chip formation, improving swarf evacuation and helping to maintain a stable surface finish during continuous turning. What does the 1.2 mm corner radius mean for finishing? A 1.2 mm corner radius balances edge strength and surface quality; it supports better finish on external profiles while reducing the risk of chipping compared with very small radii. Is the negative 0° rake suitable for roughing? The 0° negative rake provides a robust cutting edge that can handle the higher mechanical loads encountered in roughing, while still being applicable for many finishing cuts with appropriate parameters. Can this insert be indexed in standard CNMG holders? Yes, the CNMG160612-MP5 WPP20G conforms to CNMG format dimensions and tolerance class M, allowing secure seating and repeatable indexing in standard holders designed for CNMG inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CNMG160612-MP5 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MP5 chipbreaker for productive, repeatable steel turning; order the CNMG160612-MP5 WPP30G insert directly via Metav Werkzeuge or consult their specialists for application advice. CNMG160612-MP5 WPP30G — Drehwendeschneidplatte, Tiger‑tec Gold for steel, Walter Tools A CNMG160612-MP5 WPP30G indexable turning insert engineered for robust steel machining, offering a balanced mix of wear resistance and toughness in general turning operations. Tiger·tec Gold coated carbide grade WPP30G MP5 chipbreaker for predictable chip control Rhombic 80° shape for universal turning 1.2 mm corner radius, 0° negative rake Boosted productivity through a balanced grade and coating The combination of the WPP30G grade with the Tiger·tec Gold coating delivers a balanced performance that suits a wide range of steel turning tasks. The coated carbide substrate offers enhanced wear resistance while retaining sufficient toughness to resist chipping in tougher cuts. This balance reduces unplanned tool changes and supports more consistent cycle times, which translates directly into higher machine utilisation and lower per-piece manufacturing costs. For general purpose turning where throughput and repeatability matter, the coated grade is a pragmatic choice. Predictable chip control and process stability Equipped with the MP5 chipbreaker, this insert promotes reliable chip formation in typical steel applications. The chipbreaker geometry helps create short, controllable chips under a broad range of cutting conditions, reducing entanglement and protecting the workpiece surface finish. Together with the insert’s negative rake (0°), the geometry enhances process stability in interrupted cuts and heavier depths of cut, making it suitable for both roughing and medium finishing operations where chip management and machine safety are priorities. Geometry and edge preparation explained for better results The rhombic 80° profile provides good access in general turning and allows flexibility in approach angles; it is a universal geometry that supports a wide variety of turning tasks. The 1.2 mm corner radius contributes to robust edge strength and improved surface integrity on the workpiece; larger corner radii distribute cutting forces more evenly, which helps prevent premature edge breakdown. The negative rake (0°) increases cutting edge robustness, especially under higher cutting forces, while maintaining acceptable power consumption and tool life when machining steel. Practical application and selection guidance This insert is primarily intended for machining steel, as indicated by the grade’s design and the substrate characteristics. Choose cutting speeds and feeds that reflect the part material and machine rigidity; the coated grade tolerates moderate increases in speed compared with uncoated inserts, but priority should remain on stable setups and consistent coolant application where needed. For segment-specific recommendations or cutting-data charts tailored to particular grades of steel, Metav Werkzeuge’s application engineers can provide empirical starting points and adjustments for optimal throughput and surface quality. Contact Metav Werkzeuge for tailored cutting data and to source genuine Walter Tools CNMG160612-MP5 WPP30G inserts by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: CNMG160612-MP5-WPP30G-WALTER Designation: CNMG160612-MP5 WPP30G Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Core technical data Plate size: 16 Plate thickness: 06 Corner radius: 1.2 mm Free cutting angle: 0° (negative) Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP30G Chipbreaker: MP5 Shape: Rhombus 80° Execution: G Type without grade: CNMG160612-MP5 Material application: Steel FAQ Which materials is this insert suitable for? The CNMG160612-MP5 WPP30G insert from Walter Tools is designed primarily for machining steel, with the WPP30G grade optimised for typical heat generation and chip behaviour in steel turning. What advantages does the WPP30G grade offer? WPP30G is a coated carbide grade that balances wear resistance and toughness, enabling stable performance across a range of steel turning tasks and helping to extend tool life under mixed-cutting conditions. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker produces predictable, controlled chips in steel; this reduces the risk of chip entanglement and improves surface finish while supporting secure chip evacuation during higher material removal rates. What does the Rhombus 80° shape mean in practice? A rhombic 80° geometry provides universal turning capability and flexible approach angles, making the insert suitable for general-purpose external turning and a variety of toolholder configurations. Does the 0° negative rake require special machine settings? The 0° negative rake enhances edge robustness for tougher cuts; it does not mandate special machine changes but benefits from rigid fixturing and appropriate feed selection to exploit the insert’s strength. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
CNMG160612-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MU5 chipbreaker for consistent performance in stainless-steel turning; order the CNMG160612-MU5 WMP20G directly via Metav Werkzeuge or consult their technical team for application support. CNMG160612-MU5 WMP20G — indexable turning insert for stainless steels, Tiger·tec Gold (Walter Tools) CNMG160612-MU5 WMP20G is an indexable turning insert designed for machining stainless steels, delivering stable edge performance under medium to robust cutting conditions Tiger·tec Gold coated for enhanced wear resistance Optimised MU5 chipbreaker for reliable chip control Designed for stainless steel machining (ISO M) Long-lasting performance where heat and adhesion matter The combination of Tiger·tec Gold coating and the WMP20G grade delivers a balance of wear resistance and edge stability specifically for stainless steels. The coated carbide construction reduces adhesion and built-up edge during interrupted cuts and elevated temperatures, which translates into fewer insert changes and more predictable cycle times. This technical pairing supports a productive machining process with lower tooling consumption and consistent component tolerances. Geometry engineered for precision and secure cutting The rhombic 80° form with a 1.2 mm nose radius and a 0° (negative) clearance angle provides a robust cutting edge for medium to heavier cuts while retaining the ability to produce good surface finishes. The MU5 chipbreaker is shaped to control chip formation in tough-to-machine stainless grades, guiding chips away from the cutting zone and reducing the risk of damage to the workpiece. These geometrical choices improve tool life and reduce vibration in demanding turning operations. Process advantages: chip control, surface quality, and economy A well-matched grade and chipbreaker lead directly to improved chip control and more consistent finishes on turned components. The coated cutting grade minimises flank wear and maintains a sharper cutting geometry for longer, supporting tighter tolerances and fewer reworks. In production terms this means higher throughput and lower overall machining costs per part, while maintaining traceable, repeatable results across lots. Compatibility with machining strategies and tooling systems The CNMG format is widely compatible with standard clamping systems, making the insert easy to integrate into existing toolholders for roughing and semi-finishing operations. The WMP20G grade is aimed at users needing reliable performance in stainless steel applications; when paired with appropriate cutting data it supports aggressive material removal while preserving surface integrity. For advice on cutting parameters or suitable toolholders, the Metav Werkzeuge consultants can provide tailored recommendations. For reliable stainless-steel turning with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for application advice and supply of the CNMG160612-MU5 WMP20G insert. Technical Data SKU: CNMG160612-MU5-WMP20G-WALTER Article designation: CNMG160612-MU5 WMP20G Product type: indexable turning insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core Technical Data Inscribed circle: 16 Thickness: 06 Nose radius: 1.2 mm Clearance angle: 0° (negative) Insert shape: Rhombus 80° Special Features Grade: WMP20G Chipbreaker: MU5 Coated carbide (coating technology Tiger·tec Gold) Material group: M (stainless steels) Execution: G UID: CNMG160612-MU5-WMP20G-WALTER FAQ What materials is this insert suitable for? The CNMG160612-MU5 WMP20G insert is formulated for stainless steels (ISO group M) and supports medium to robust machining conditions. What does the MU5 chipbreaker provide? The MU5 chipbreaker on this insert improves chip control during turning of tougher stainless grades, helping to prevent entanglement and protecting the cutting edge. How does the Tiger·tec Gold coating benefit performance? Tiger·tec Gold coating enhances wear resistance and reduces adhesion tendencies, resulting in longer tool life and more stable cutting conditions for the WMP20G grade. Is the rhombic 80° shape suitable for finishing? Yes — the rhombic 80° geometry with a 1.2 mm nose radius balances strength and finish capability, making it appropriate for both semi-finishing and finishing passes depending on setup. Can this insert be used in standard CNMG toolholders? The CNMG160612-MU5 WMP20G follows the CNMG form factor and is compatible with standard CNMG toolholders; ensure the holder and clamping system are rated for the intended cutting forces. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for identification and explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product from the manufacturer.
CNMG160612-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Silver grade insert that combines WMP20S wear resistance and the MU5 chipbreaker for secure chip control in stainless steel turning; order supply or request advice through Metav Werkzeuge for a smooth tool changeover. CNMG160612-MU5 WMP20S indexable turning insert — Tiger‑tec Silver, for stainless steel (Walter Tools) CNMG160612-MU5 WMP20S is an indexable turning insert from the Tiger‑tec Silver series designed for robust stainless steel machining under medium to demanding conditions. Tiger‑tec Silver coated grade WMP20S Optimised MU5 chipbreaker for stainless Rhombic 80° geometry with 0° negative rake Corner radius 1.2 mm for enhanced edge stability Consistent productivity when machining stainless steel The Tiger‑tec Silver WMP20S grade is engineered to address the typical challenges of stainless steel: high toughness, tendency to form built‑up edge and elevated cutting temperatures. With a coated carbide substrate and tailored surface treatment, the grade promotes stable wear behaviour and predictable tool life. Combined with the MU5 chipbreaker, the system encourages controlled chip formation, reducing interruptions from tangled chips and improving cycle‑time consistency — a direct contribution to higher throughput and lower rework rates. Geometry that supports longer edge life and secure seating The rhombic 80° insert shape with a corner radius of 1.2 mm and 0° negative rake delivers a balance of strength and accessibility in internal and external turning. The geometry distributes cutting forces over a larger edge area, which helps to avoid premature chipping during interrupted cuts or tougher stainless grades. The standard insert size (16 mm) and thickness code 06 ensure compatibility with common toolholders while the specific seat form improves repeatability at index changes, reducing setup time and scrap. Predictable performance through optimised chip control The MU5 chipbreaker is optimised for ductile materials like stainless steel, promoting short, manageable chips under a wide range of feeds and depths. This results in fewer machine stops and safer handling at higher cutting temperatures. The coated surface acts as a thermal barrier, lowering friction and improving dimensional stability during longer engagements. For production environments seeking reproducible surface finish and minimal operator intervention, this combination is a pragmatic choice that supports lean machining objectives. Selection and application advice for reliable results When integrating this insert into a turning process, match feed and depth parameters to the workpiece alloy and hardness, favouring moderate feeds to maintain chip control. The CNMG160612-MU5 WMP20S insert is particularly suitable for medium to robust cutting conditions in stainless steel, where the Tiger‑tec Silver coating and MU5 geometry together reduce the risk of built‑up edge. For complex part geometries or unusual alloys, consult Metav Werkzeuge for specific recommendations on toolholders and cutting data to ensure process security. For tailored recommendations or to secure supply of Walter Tools' Tiger‑tec Silver inserts, contact Metav Werkzeuge for expert guidance and prompt order handling. Technical data SKU: CNMG160612-MU5-WMP20S-WALTER Designation: CNMG160612-MU5 Article: CNMG160612-MU5 WMP20S Manufacturer: Walter Tools Facts Size: 16 mm Thickness: 06 Corner radius: 1.2 mm Shape: Rhombus 80° Rake: 0° (negative) Special features Series: Tiger‑tec Silver Grade: WMP20S (coated carbide) Chipbreaker: MU5 (optimised for stainless steel) Application: stainless steel machining Tolerance class: M Execution: G FAQ What materials is this insert designed for? The CNMG160612-MU5 WMP20S insert is designed primarily for machining stainless steel, where the WMP20S grade and MU5 chipbreaker ensure stable chip control. How does the MU5 chipbreaker affect machining performance? The MU5 chipbreaker promotes short, manageable chips in ductile materials, improving process continuity and reducing downtime when using the CNMG160612-MU5 WMP20S insert. Is the insert suitable for interrupted cuts? Yes, the rhombic 80° geometry and 1.2 mm corner radius provide enhanced edge strength, making the insert resilient for interrupted turning in stainless steel. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods of the manufacturer Walter Tools.
CNMG160612-MU5 WPP05G WPP05G Wendeplatten - Walter Tools
Benefit from high wear resistance and reliable chip control thanks to the Tiger·tec Gold grade and MU5 chipbreaker; the robust 1.2 mm corner radius and rhombic 80° geometry support consistent, economical turning of steel parts — order the insert directly via Metav Werkzeuge or consult the advisers for application recommendations CNMG160612-MU5 WPP05G — Turning indexable insert, Tiger·tec Gold, for steel — Walter Tools CNMG160612-MU5 WPP05G is a negative‑rake, rhombic 80° turning insert designed for productive steel machining in general turning operations Tiger·tec Gold coating for extended tool life MU5 chipbreaker for consistent chip control Rhombic 80° geometry for stable cutting forces 1.2 mm corner radius for robust edge strength Longer tool life through a premium coating and grade The combination of the Tiger·tec Gold technology and the WPP05G cutting grade results in markedly improved resistance to abrasive wear and thermal stresses during turning of steel. This coated hardmetal formulation is engineered for the typical heat development and chip formation of ferrous materials, enabling longer tool life and fewer insert changes. The outcome is a measurable productivity gain and reduced process interruptions in series production. Predictable chip formation and surface consistency Equipped with the MU5 chipbreaker and a rhombic 80° form, the insert promotes stable chip control and consistent cutting forces. The negative rake angle of 0° (negative) adds to edge strength, making the geometry suitable for medium to heavy cuts where burr reduction and surface regularity are important. For operators less familiar with chipbreaker technology, the MU5 design channels chips reliably, reducing the risk of recutting and improving post‑process cleanliness. Robust edge and versatile application in steel machining The 1.2 mm corner radius provides a durable cutting edge that tolerates intermittent cuts and varied feed rates while maintaining dimensional stability. The insert is specified for the machining group P (steel) according to ISO classifications, covering unalloyed and alloyed steels in a wide range of cutting conditions. This makes the insert a pragmatic choice for job shops and industrial turning cells looking for a balance between edge life and surface finish. Contact Metav Werkzeuge for detailed cutting parameters and to order the CNMG160612-MU5 WPP05G turning insert from Walter Tools — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CNMG160612-MU5-WPP05G-WALTER Designation: CNMG160612-MU5 WPP05G Product type: Turning indexable insert Manufacturer: Walter Tools Facts Insert size: 16 Plate thickness: 06 Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: M Special features Grade series: Tiger·tec Gold Grade/sort: WPP05G Chipbreaker: MU5 Plate form: Rhombus 80° Base material indication: P (steel) FAQ What materials is this insert intended for? The CNMG160612-MU5 WPP05G insert is specified for the ISO group P, meaning it is designed primarily for machining steel (unalloyed and alloyed steels). How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WPP05G grade increases resistance to abrasive wear and thermal loading, which extends the insert life and enhances repeatability in series turning operations. Which chipbreaker is fitted and what benefit does it provide? The insert uses the MU5 chipbreaker, which ensures predictable chip formation and safer chip evacuation, supporting stable machining and improved surface quality. Is the insert suitable for heavy roughing cuts? With a 0° negative rake and a 1.2 mm corner radius, the insert is robust and can handle medium to heavy cuts in steel, offering a balance between strength and finish. Can this insert be used for finishing operations? Yes; while optimised for general steel machining, the geometry and grade can produce satisfactory surface finishes when appropriate feeds and speeds are applied. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com