Take advantage of the combination of high-speed steel construction, a vapour-treated surface to reduce material welding, and a slim 2.5 mm kerf for efficient, precise cutting of iron and steel; order directly via Metav Werkzeuge or consult our specialists for machine compatibility and application advice. TECWERK 275 mm HSS Metal Circular Saw Blade, BW Tooth, 220T The TECWERK 275 mm HSS metal circular saw blade is engineered for precision cutting of iron and steel on industrial circular sawing machines, offering a fine-tooth profile and treatment to reduce build-up for consistent cut quality. High-speed steel construction Vapour-treated to reduce welding 275 mm diameter, 32 mm bore BW bow tooth, 220 teeth Consistent precision with a fine-tooth profile The blade delivers consistent precision thanks to its 220 teeth and BW (bow) tooth form, which provides a fine, alternating chamfered edge for smoother cuts and reduced burr formation. Made from high-speed steel (HSS), the cutting edges retain hardness under heat, allowing reliable results during prolonged use. The relatively narrow 2.5 mm blade width minimises material loss while maintaining rigidity; the result is a reduced need for secondary finishing and improved material yield on each workpiece. Reduced welding and longer running times A key operational advantage is the vapour-treated surface, applied to the cutting body to help prevent material adhesion at the kerf. This treatment acts as a protective barrier, reducing build-up when sawing ferrous metals and lowering the risk of tooth welding that can degrade cut quality. Combined with the HSS substrate, the treatment contributes to longer blade life and more stable cutting performance under industrial workloads, supporting predictable production cycles. Easy mounting and machine compatibility for industrial use The blade features a 32 mm central bore and multiple secondary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) for secure mounting and optimal run-out control. These hole patterns increase mounting options and help to distribute clamping forces evenly, which reduces vibration and wear. The design is compatible with a range of circular sawing machines, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models, enabling straightforward integration into existing production lines and workshop equipment. Practical benefits for everyday workshop productivity For workshops and production shops focused on efficiency, this saw blade translates technical features into measurable benefits: improved surface finish from the fine tooth geometry, lower scrap rates due to the slim kerf, and fewer interruptions thanks to treatment that curbs welding. Supplied as a single unit and manufactured for industrial cutting tasks, the blade supports reliable throughput and helps to reduce rework, aligning with the practical needs of metalworking professionals. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK blade into production; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility, ordering and technical specifications. Technical Data Article number: 2000814200NW Brand: TECWERK Type: Metal circular saw blade Diameter: 275 mm Bore diameter: 32 mm Blade width: 2.5 mm Facts Teeth: 220 Pitch: 4 Packaging unit: 1 Special features Material: High-speed steel (HSS) Coating: Vapour-treated for reduced material welding Tooth form: BW (bow tooth) with alternating chamfer Secondary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular sawing machines FAQ Which materials is this blade suitable for cutting? The TECWERK 275 mm HSS metal circular saw blade is designed primarily for iron and steel grades; the HSS construction and vapour treatment support cutting of typical ferrous materials with reduced adhesion and good edge life. How does the vapour-treated surface affect performance? Vapour treatment on the blade reduces the tendency for chips and molten material to adhere to the teeth, so the TECWERK blade maintains cutting performance longer and requires fewer cleaning interruptions during continuous use. What does the BW tooth form mean for the finished edge? The BW bow tooth with alternating chamfer provides a finer, more regular cut edge and lower burr levels, improving surface finish and often reducing the need for additional deburring after sawing. Can this blade be mounted on different industrial saw brands? Yes, the blade’s 32 mm bore and multiple secondary holes offer flexible mounting options and are compatible with machines from Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, enabling straightforward installation in many workshop setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a narrow kerf and high tooth count for reduced material loss and finer finishes, combined with a HSS‑Co composition and vapourised coating that minimise material buildup for uninterrupted production; order the blade directly via Metav Werkzeuge or consult our specialists for machine compatibility. Metal circular saw blade Form BW D 275 mm B 2.5 mm HSS‑Co, Bore Ø 40 mm, 220 teeth by TECWERK — high‑precision cutting for stainless and high‑strength steels The Metal circular saw blade Form BW D 275 mm B 2.5 mm HSS‑Co, Bore Ø 40 mm, 220 teeth is a purpose‑built circular saw blade for industrial metal cutting, designed for stainless and other high‑strength steels in workshop and production environments HSS‑Co construction for high wear resistance 275 mm diameter for standard saw frames 2.5 mm narrow kerf for minimal material waste 220 teeth for fine, burr‑reduced cutting Consistent, burr‑reduced cuts for stainless and high‑strength steels The combination of HSS‑Co alloy and a fine 220‑tooth layout produces smooth, consistent cuts in demanding materials such as stainless steel and other high‑strength alloys. The cobalt‑alloyed high‑speed steel retains hardness at elevated temperatures, reducing edge wear during long production runs; the high tooth count lowers cutting forces per tooth, resulting in fewer burrs and less secondary finishing. The vapourised coating acts as a barrier against material sticking, so feed rates remain steady and tool life is extended. Precise kerf and geometry that protect component tolerances A narrow 2.5 mm cut width conserves raw material and maintains component tolerances by limiting heat‑affected zones and kerf‑induced distortion. The BW tooth form — a bowed tooth with alternating bevel — balances chip removal and finish quality, enabling fine surface results without sacrificing cutting stability. For operations where dimensional accuracy matters, this geometry helps reduce rework and maintain throughput, improving cost efficiency across batches. Simple mounting and reliable machine compatibility The blade features a 40 mm bore with additional auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) to suit a range of industrial circular saw systems. Compatibility covers common saw brands such as Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines, allowing straightforward retrofit into existing production lines. The standard mounting configuration supports rapid blade changes and accurate centring, reducing downtime and simplifying maintenance routines. Designed for continuous workshop use and reduced maintenance Engineered for repetitive cutting cycles, the blade’s vapourised coating reduces adhesion of welded material and sticky chips, easing cleaning intervals and preserving blade geometry. The HSS‑Co composition tolerates higher cutting temperatures, meaning fewer interruptions for sharpening or replacement. Paired with Metav’s reliable supply chain and quality assurance, the blade supports steady production and predictable maintenance planning in industrial and trade workshops. For a precise supply and to confirm suitability for the intended machine, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to secure this TECWERK circular saw blade for the workshop. Technical data Article number: 2000814214NW Brand: TECWERK Product type: Metal circular saw blade Material: HSS‑Co Coating: vapourised Numbers Diameter: 275 mm Kerf / width: 2.5 mm Teeth: 220 Bore diameter: 40 mm Pitch: 4 Special features BW tooth form – bowed tooth with alternating bevel Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Vapourised coating as protection against material build‑up Suitable for stainless and high‑strength steels Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is this blade suitable for? The Metal circular saw blade Form BW D 275 mm B 2.5 mm HSS‑Co, Bore Ø 40 mm, 220 teeth by TECWERK is designed primarily for stainless steel and other high‑strength steels, with the HSS‑Co composition and vapourised coating improving cut quality and reducing material adhesion. Which machines can accept the 40 mm bore and auxiliary holes? This TECWERK circular saw blade fits many industrial machines; mounting with a 40 mm bore plus the specified auxiliary holes is compatible with brands such as Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw systems. How does the vapourised coating affect performance? The vapourised coating on the blade reduces material build‑up and adhesion during cutting, which stabilises feed rates, lowers the need for cleaning, and extends effective cutting life of the HSS‑Co tool. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS construction with a vapour-treated surface and a fine BW tooth geometry, the blade gives consistent, burr-minimised cuts in iron and steel; order the TECWERK blade directly via Metav Werkzeuge or contact our consultants for compatibility guidance. TECWERK 275 mm metal circular saw blade — HSS, 220 teeth (BW) The TECWERK 275 mm metal circular saw blade is a high-speed-steel circular saw blade engineered for precise cutting of iron and steel on compatible workshop circular saws. HSS construction for high cutting resilience Vapour-treated surface prevents material build-up 275 mm diameter with 32 mm bore for standard spindles BW arc teeth, 220 teeth for fine, burr-free cuts Accurate, repeatable cuts for steel fabrication Constructed from HSS, the blade delivers the hardness and thermal stability required for demanding metal-cutting tasks while the BW tooth form (arc tooth with alternating bevel) creates a controlled shearing action that reduces burr formation. With 220 teeth, the geometry favours fine, burr-free cuts and a superior surface finish on profiles and tubing. For workshop managers this translates to fewer secondary processes and a predictable part quality that keeps production steps flowing. Less rework and extended cutting intervals The vapour-treated coating acts as a protective layer against material adhesion and welding on the cutting edge, significantly reducing material build-up during prolonged runs. The result is longer cutting cycles and reduced cleaning or dressing frequency, which supports higher utilisation of saw time and lower unplanned downtime. Explained plainly: the treatment helps the blade stay cleaner during steel cutting, preserving edge geometry and extending effective tool life. Secure mounting and broad machine compatibility With a 32 mm bore and a pattern of auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm), the blade offers stable clamping and vibration control on many industrial saws. It is declared compatible with Berg & Schmid, MEP, Pedrazzoli, Kasto and Thomas circular saw machines, easing integration into existing equipment. Suited for iron and steel materials, the blade’s combination of diameter, thin kerf and tooth count makes it a practical choice where material conservation and fine edge quality are priorities. For reliable steel-cutting performance with TECWERK HSS blades, contact Metav Werkzeuge for availability and machine compatibility—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000814246NW Product type: Metal circular saw blade Manufacturer: TECWERK Core data Diameter: 275 mm Tooth count: 220 Width: 2.0 mm Bore diameter: 32 mm Pitch: 4 Special features Material: HSS Coating: vapour-treated Tooth form: BW (arc tooth with alternating bevel) Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Suitable for iron and steel materials Compatible with Berg & Schmid, MEP, Pedrazzoli, Kasto, Thomas Packaging unit: 1 FAQ Which materials can be cut reliably with this blade? The TECWERK 275 mm metal circular saw blade (SKU 2000814246NW) is designed primarily for iron and steel materials; the HSS substrate and vapour-treated surface support stable performance when cutting ferrous metals. What does the BW tooth form mean in practice? BW denotes an arc tooth with alternating bevel; this geometry produces a finer shearing action that reduces burrs and improves edge finish compared with coarse tooth forms, which benefits subsequent fabrication steps. How does the vapour-treated coating affect performance? The vapour-treated surface on the TECWERK blade reduces adhesion and the tendency for material to weld onto the cutting edge, lowering the frequency of cleaning and edge dressing and helping to maintain cutting quality over longer runs. Will the blade fit my circular saw spindle? The blade has a 32 mm bore and a set of auxiliary holes to match common mounting patterns; it is specified for compatibility with Berg & Schmid, MEP, Pedrazzoli, Kasto and Thomas machines, but verification of flange and clamping dimensions is recommended before installation. How should the blade be handled for safe operation? Handle the TECWERK metal circular saw blade with care, ensure correct orientation and secure clamping to the saw flange, and follow machine manufacturer torque and safety guidelines; correct mounting preserves blade life and cutting accuracy. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Taking advantage of a 275 mm diameter and 180 teeth in a HSS‑Co construction ensures fine-edge durability and consistent cut quality for demanding metalworking tasks; the vapour‑treated coating further reduces material adhesion and keeps cycle times predictable. Order the metal circular saw blade directly via Metav Werkzeuge or contact the technical consultants for application-specific advice. TECWERK Metal Circular Saw Blade BW — 275 mm, HSS‑Co, 180 teeth TECWERK Metal Circular Saw Blade BW is a high-performance metal circular saw blade designed for precision cutting of stainless and high‑strength steels in industrial sawing applications. HSS‑Co construction for long tool life Vapour‑treated coating prevents welding 275 mm diameter for industrial saws Compatible with 40 mm bore machines Accurate, durable cuts for stainless and high‑strength steels The blade is manufactured from HSS‑Co, a cobalt‑enriched high‑speed steel grade that combines hardness with fracture resistance, enabling a stable cutting edge under thermal load. With 180 teeth and a fine pitch, the design produces a smooth finished edge and reduces the need for secondary deburring—benefit: reduced rework and higher first‑pass yields. This material choice supports higher cutting speeds than standard tool steels while maintaining lifetime stability. Less material build‑up, fewer interruptions A vapour‑treated coating serves as a protective barrier against material adhesion during cutting of stainless steels (VA) and other high‑strength alloys. By lowering the tendency for chips to weld to the gullets, the treated surface helps preserve the tooth geometry and extends effective runtime. The practical result is fewer stoppages for cleaning and a more predictable production flow, which improves overall machine utilisation. Secure mounting and machine compatibility for stable runs The blade features a central 40 mm bore and multiple auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) to suit a range of industrial circular sawing machines. The precise hole pattern and the BW tooth form (bow tooth with alternate chamfering) help ensure even load distribution and reduced radial run‑out when mounted, delivering cleaner cuts and safer operation on specified machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra systems. Slim kerf and tooth geometry tuned for efficiency At a blade width of 2.5 mm, the kerf balances material removal and stiffness to limit power draw while maintaining dimensional accuracy. The BW tooth geometry, combined with the fine pitch, is optimised for cutting stainless and alloyed steels, giving a balance between cutting speed and surface quality. For workshop integration, this configuration supports repetitive production environments where consistent part quality and predictable tool change intervals are priorities. Contact Metav Werkzeuge for a technical consultation on the TECWERK metal circular saw blade BW and to request a tailored cutting specification or quotation; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000814215NW Product type: Metal circular saw blade Brand: TECWERK Packaging unit: 1 Facts Diameter: 275 mm Bore diameter: 40 mm Blade width: 2.5 mm Teeth: 180 Pitch: 5 Special features Material: HSS‑Co Coating: vapour‑treated Tooth form: BW (alternating chamfer) Additional holes: 2 x 8/55 mm; 4 x 12/64 mm Suitable for stainless and high‑strength steels Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra circular sawing machines FAQ What materials is this blade suitable for? This TECWERK metal circular saw blade is designed for stainless steel (VA) and other high‑strength steels; the HSS‑Co material and vapour‑treated coating help during tough alloy cutting. What is the central bore size and how does it fit machines? The blade has a 40 mm central bore with multiple auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm), allowing secure mounting on compatible industrial circular saws such as Eisele and Ulmia models. How does the coating improve performance? The vapour‑treated surface reduces material adhesion and chip welding on the tooth flanks, which extends runtime and decreases cleaning downtime for the blade. What cutting quality can be expected with 180 teeth? With 180 teeth and a fine pitch, the blade produces a smooth edge finish that minimises the need for finishing operations and supports high first‑pass yields. Is this blade optimised for a specific kerf or power consumption? The 2.5 mm blade width provides a slim kerf that balances lower power draw with sufficient rigidity for accurate, repeatable cuts in industrial workflows. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of high-speed steel construction and a vapour-treated coating to reduce material build-up and extend service life; the blade’s 144-tooth, Form C geometry ensures fine, burr-minimised cuts in iron and steel. Order directly via Metav Werkzeuge or consult the Metav team for technical advice. TECWERK metal circular saw blade, Form C – 275 mm, HSS, 144 teeth A TECWERK metal circular saw blade engineered for precision cutting of iron and steel on stationary circular saw machines commonly used in metalworking shops. HSS for high cutting performance Vapour-treated surface to prevent welding 144 fine teeth, Form C arched profile 40 mm bore with multiple mounting holes Clean, consistent cutting for ferrous metals Manufactured from high-speed steel, this saw blade delivers a combination of hardness and toughness that is advantageous when machining iron and steel. The 275 mm diameter and 2.5 mm kerf are optimised for stable cutting with a fine finish, while the high tooth count supports reduced vibration and a smoother workpiece surface. As a result, throughput is improved and secondary finishing is reduced, which supports more efficient production workflows and predictable component quality. Coating and tooth design that reduce material build-up A vapour-treated surface is applied as a protective layer to limit material welding at the cutting edge; this treatment reduces gumming and helps maintain cutting geometry over longer cycles. The Form C tooth profile, an arched tooth with primary and secondary cutting edges, is configured for controlled chip formation and minimal burr. These technical choices together mean less cleaning of the blade during shifts and more consistent cut quality for sheet, bar and section work. Precise mounting and broad machine compatibility The blade is supplied with a 40 mm bore and the specified subsidiary hole pattern 2 x 8/55 mm; 4 x 12/64 mm, enabling secure axial location and repeatable run-out on compatible machines. It is suitable for established brands of metal circular saws such as Eisele, Ulmia, Trennjäger, Rekord and Ultra, where correct mounting ensures concentric rotation and reduced blade stress. Accurate seating reduces vibration, which contributes to longer tool life and more reliable cut tolerances. Low-maintenance durability and predictable replacement cycles Combining high-speed steel with vapour treatment yields a blade that resists edge degradation under normal operational conditions. The high tooth count (144 teeth) is intended to produce a fine kerf and minimise edge chipping; this permits longer intervals between dressing or replacement compared with coarse-toothed alternatives. In practice, fewer process interruptions and a lower frequency of blade changes support more consistent machine availability and a clearer maintenance schedule. Contact Metav Werkzeuge for ordering information or an application review of the TECWERK circular saw blade; specialist advice and rapid dispatch are available direct from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814170NW Product: Metal circular saw blade, Form C, TECWERK Material: HSS Coating: vapour-treated Numbers / Core technical data Diameter: 275 mm Width: 2.5 mm Teeth: 144 Bore diameter: 40 mm Pitch: 6 Designs / Special features Tooth profile: Form C (arched tooth with primary and secondary cutting edges) Coating purpose: protection against material welding Mounting holes: 2 x 8/55 mm; 4 x 12/64 mm Machine compatibility: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is this saw blade suitable for? The TECWERK metal circular saw blade (metal circular saw blade, SKU 2000814170NW) is designed for cutting iron and steel materials and is vapour-treated to reduce edge welding. How does the vapour-treated coating help in daily use? The vapour-treated surface on the TECWERK blade reduces material build-up at the cutting edge, which helps maintain cutting performance and extends the usable life of the blade. Which machines will accept this blade? Mounting compatibility includes common metalworking circular saws; the blade fits Eisele, Ulmia, Trennjäger, Rekord and Ultra machines when the correct flange and hole pattern are used. What does Form C tooth geometry mean for the cut finish? Form C denotes an arched tooth with primary and secondary cutting edges; this geometry promotes controlled chip formation and a finer finish, which reduces the need for secondary deburring. Are the mounting hole specifications included for verification? Yes, the TECWERK blade lists mounting holes as 2 x 8/55 mm and 4 x 12/64 mm and a central bore of 40 mm for correct seating and secure fixation. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining HSS construction, a vapour-treated anti-weld coating and a precise 40 mm bore, this circular saw blade delivers consistent, burr-free cuts in iron and steel and reduces built-up edge during long runs — order via Metav Werkzeuge or consult our specialists for application advice. TECWERK metal circular saw blade Form C, 275 mm – vapour-treated HSS, 110 teeth The TECWERK metal circular saw blade Form C, 275 mm is designed for high-quality metal cutting on dedicated circular saw machines and is optimised for iron and steel workpieces. HSS, vapour-treated to prevent welding 275 mm diameter, 110 teeth 40 mm central bore with auxiliary holes Form C arced tooth for clean, smooth cuts High-performance construction for consistent metal cutting Made from HSS, the blade combines toughness and heat resistance to withstand the demands of continuous metal cutting. The 275 mm diameter and slim 2.5 mm kerf contribute to efficient material removal while keeping the required cutting power moderate. The specification of 110 teeth and a tooth pitch 8 provide a fine cutting action that reduces vibration and delivers an improved surface finish on iron and steel components. The item is especially suitable for industrial and workshop environments where repeatability and predictable results are essential. Coating that prevents built-up edge and improves productivity The vapour-treated surface functions as an anti-weld protection, reducing adhesion of hot metal chips and minimising built-up edge during prolonged operation. This treatment helps maintain cutting geometry for longer intervals between maintenance cycles, which translates into less downtime and a steadier feed rate. In practical terms, workshops benefit from fewer regrinds and more consistent component tolerances when processing thicker or adhesive steels. Secure mounting and machine compatibility for robust performance A 40 mm bore with additional mounting options (2 × 8/55 mm; 4 × 12/64 mm) ensures stable seating and even load distribution on a variety of circular saw spindles. The blade’s layout and hole pattern support safe operation on common metal-cutting saws such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models. Stable mounting reduces run-out, which in turn protects the blade and the saw’s drive train while improving cut precision and blade life. Tooth geometry and workshop advantages that save time The Form C arced tooth with primary and secondary cutting edges balances cutting aggressiveness with edge longevity, producing clean kerfs with reduced burr formation. The narrow 2.5 mm width and refined tooth count are beneficial where material yield and minimised post-processing are priorities. Overall, these characteristics deliver a favourable ratio of cutting speed, surface quality and total lifetime cost, making the blade a pragmatic choice for production and jobbing shops that require reliable metal-cutting performance. Contact Metav Werkzeuge for tailored advice on TECWERK circular saw blades and assured delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814168NW Label: Metallkreissägeblatt Form C D.275mm B.2,5mm HSS Bohrungs-D.40mm Z.110 TECWERK Manufacturer: TECWERK Measurements Diameter: 275 mm Teeth: 110 Width: 2.5 mm Bore diameter: 40 mm Pitch: 8 Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Features Material: HSS Coating: vapour-treated Tooth form: Form C (arced tooth with primary and secondary cutting edges) Application: iron and steel workpieces Suitable for: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines Packaging unit: 1 FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is specified for iron and steel workpieces and performs reliably on typical construction and engineering steels. How does the vapour-treated coating benefit cutting? The vapour-treated surface on the blade reduces material adhesion and built-up edge, so the TECWERK blade maintains cutting geometry longer and requires less frequent maintenance. Is the blade compatible with common metal circular saws? Yes, the blade’s 40 mm bore and auxiliary hole pattern make it compatible with many metal-cutting saws, including Eisele and Ulmia models, and the blade is intended for use on Rekord, Trennjäger and Ultra series machinery. What does Form C tooth geometry mean for finish and feed? Form C denotes an arced tooth with primary and secondary cutting edges; this geometry on the TECWERK blade provides a fine finish and allows controlled feed rates with reduced burr formation. How should the blade be mounted for safe operation? Ensure the 40 mm centre bore and auxiliary holes are correctly aligned and that the blade is clamped flat against the flange; correct mounting reduces run-out and prolongs the life of the blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

The combination of HSS‑Co construction, a vapour‑treated anti‑weld finish and a fine 144‑tooth pitch delivers consistent cuts in stainless and other high‑strength steels; order directly via Metav Werkzeuge or consult the specialists for machine compatibility and cutting parameters TECWERK metal circular saw blade Form C — 275 mm, HSS‑Co, 40 mm bore A TECWERK metal circular saw blade engineered for precision cutting of stainless and high‑strength steels in industrial circular sawing machines HSS‑Co construction for high durability Vapour‑treated anti‑weld surface finish 275 mm diameter with 2.5 mm kerf 40 mm bore with multiple auxiliary holes Consistent cutting of stainless and high‑strength steels The HSS‑Co alloy gives a durable cutting edge that withstands the demands of tough materials. The vapour‑treated surface acts as an anti‑weld barrier, reducing material adhesion at the cutting zone and extending service intervals. In practise, this means fewer stoppages for cleaning and a more consistent edge life when processing stainless steel and other high‑strength steels. The combination of material and treatment supports stable cutting temperatures and reduces the risk of built‑up edge. Fine tooth geometry for smooth finishes and thin sections With 144 teeth and a pitch of 6, the blade produces a finer cut than coarse alternatives, yielding improved edge quality and reduced burr formation on thinner workpieces. The C‑tooth form — a curved main tooth with pre‑ and post‑cutters — promotes controlled chip formation and a balanced cut. The 2.5 mm kerf balances stiffness and material waste, providing good guidance in through‑feed and precision sawing tasks while limiting unnecessary material loss. Compatibility, mounting and operational reliability A 40 mm bore with additional auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) ensures secure mounting and concentric alignment on common industrial saw spindles. The blade is suitable for Eisele, Ulmia, Trennjäger, Rekord and Ultra circular sawing machines, where stable clamping and correct bore spacing are essential for vibration‑free operation. Proper installation and correct feed/cutting parameters deliver the expected life and surface quality; specialist consultation is recommended for optimising settings on specific machines For specification advice, ordering or to confirm machine compatibility with this TECWERK HSS‑Co blade (SKU 2000814216NW), contact Metav Werkzeuge — supply and technical guidance direct from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000814216NW Label: Metal circular saw blade Form C, 275 mm, HSS‑Co, 40 mm bore, 144 teeth Manufacturer: TECWERK Facts Diameter: 275 mm Width (kerf): 2.5 mm Bore diameter: 40 mm Teeth: 144 Pitch: 6 Special features Material: HSS‑Co Coating: vapour‑treated (anti‑weld) Tooth form: C (curved main tooth with pre‑ and post‑cutters) Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Compatible with: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ Which materials is this blade suitable for? The blade (TECWERK metal circular saw blade, SKU 2000814216NW) is designed for stainless steel and other high‑strength steels, as indicated by the HSS‑Co construction and vapour‑treated finish. What does HSS‑Co mean and why is it important? HSS‑Co denotes a cobalt‑alloyed high‑speed steel that improves red hardness and wear resistance; the TECWERK blade uses this grade to maintain edge stability under demanding cutting conditions. How does the vapour‑treated finish affect cutting performance? The vapour‑treated surface reduces material adhesion and mitigates weld‑on at the cutting edge, supporting longer intervals between maintenance and more consistent cut quality. What is the advantage of the C tooth form and high tooth count? The C tooth form, with pre‑ and post‑cutters, controls chip flow and reduces burrs; the fine 144‑tooth configuration yields smoother finishes on thin or delicate sections. Are the mounting hole patterns compatible with standard industrial saws? Yes, the 40 mm bore plus the specified auxiliary hole pattern (2 × 8/55 mm; 4 × 12/64 mm) enables secure fitting on many industrial circular saw spindles; confirm exact spacing with Metav Werkzeuge for specific machines. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the blade's combination of HSS construction, vapourised anti-weld coating and high tooth count for consistent, burr-minimised cuts; order directly via Metav Werkzeuge or contact our consultants for tailored advice and rapid European dispatch. Metal circular saw blade Form C – TECWERK (275 mm, HSS, 144 T) The Metal circular saw blade Form C is a high-performance HSS blade designed for precision sawing of iron and steel on industrial circular sawing machines HSS with vapourised coating 275 mm diameter, 2.0 mm width 144 C-form teeth for smooth cuts 32 mm bore with multiple holes Consistent precision for industrial metal cutting The HSS construction ensures a durable cutting edge suitable for repetitive workshop use while the high 144 teeth count reduces vibration and produces a finer surface finish than coarse-tooth alternatives. Optimised C tooth form geometry delivers a controlled chip formation and clean kerf, which translates into less rework and more predictable downstream processing. Where fine tolerances matter, a blade built for stable cutting substantially reduces the need for secondary finishing. Less material adhesion, longer service life A vapourised coating acts as a protective layer to reduce material weld and sticking during cutting of ferrous materials, extending blade life and preserving edge geometry for longer runs. This surface treatment lowers friction and helps evacuate heat from the cutting zone, so tool life and cycle reliability improve under continuous operation. For cost-sensitive production, fewer blade changes means increased uptime and lower overall process cost. Simple mounting and machine compatibility The blade's 32 mm bore and the supplied pattern of auxiliary holes allow secure mounting and improved runout control across many common sawing systems; this facilitates quick changeovers and reliable concentricity. The design is compatible with standard industrial circular sawing machines from established manufacturers, offering a near-plug-and-play replacement that supports consistent results without extensive machine modification. Optimised for iron and steel applications Engineered specifically for iron and steel, the blade combines material-specific geometry and surface treatment to maintain cut quality in demanding metalworking tasks. The thin 2.0 mm body balances material removal and stiffness, enabling efficient throughput while keeping kerf loss low. In production environments where reproducibility and throughput are priorities, this configuration supports both high-volume tasks and precision cutting jobs. For expert advice on using the TECWERK HSS 275 mm blade in a specific saw or application, contact Metav Werkzeuge for product matching and rapid supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000814247NW Product type: Metal circular saw blade Brand: TECWERK Diameter: 275 mm Bore diameter: 32 mm Width: 2.0 mm Teeth: 144 Tooth form: C Core data Diameter: 275 mm Bore: 32 mm Width: 2.0 mm Teeth count: 144 Pitch: 6 Special features Material: HSS Vapourised coating to reduce material welding For iron and steel materials Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Curved tooth with front and back cutting edges Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas saws FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade Form C is specified for iron and steel, the combination of HSS and vapourised coating helping to maintain edge life when cutting ferrous metals. How does the vapourised coating help in practice? The vapourised coating reduces material adhesion and friction on the cutting edge, which lowers heat build-up and helps prevent weld deposits during long cutting cycles. Will this blade fit my machine? The blade's 32 mm bore and auxiliary hole pattern provide broad mounting compatibility; check the machine's adaptor and hole pattern — when in doubt, reference SKU 2000814247NW for exact matching. What finish can be expected on the cut parts? With 144 teeth and the C-form geometry, the blade delivers a fine kerf and reduced burr formation, resulting in a cleaner surface that often reduces the need for secondary finishing. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the blade’s HSS construction, vaporised anti-weld treatment and fine 144-tooth geometry for consistent, burr-free cuts in iron and steel; order the metal circular saw blade directly via Metav Werkzeuge or ask our consultants if needed. Metal circular saw blade, Form C, 275 mm, HSS, Bore Ø 32 mm, Z 144 (TECWERK) A metal circular saw blade, Form C, 275 mm designed for precision cutting of iron and steel on industrial and workshop circular saws High-speed steel (HSS) construction Vaporised anti-weld coating 275 mm diameter, 2.5 mm kerf 32 mm bore with multiple auxiliary holes Engineered for reliable steel cutting The blade is made from HSS (high-speed steel), which provides a high degree of hardness and edge stability under continuous cutting loads. The vaporised surface treatment acts as a protective layer to reduce material adhesion and welding on the tooth tips, which in turn lowers the frequency of manual cleaning and sharpening. With a close tooth pitch and 144 teeth, the geometry is optimised for fine, fast metal removal on medium-thin sections, delivering a smoother finish and reducing secondary deburring work for production and workshop environments. Precision fit for industrial circular saw machines With a nominal diameter of 275 mm and a slim kerf of 2.5 mm, the blade maintains a balance between cut quality and material conservation. The central bore Ø 32 mm and the set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) ensure secure mounting and vibration damping on a wide range of machines. Compatibility is established with leading saw makes including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, allowing straightforward substitution without extensive machine modification and helping to preserve spindle bearings and guide accuracy. Durability that reduces downtime and rework The combination of HSS metallurgy and the anti-weld vapour treatment extends tool life under typical ferrous-material workloads. The Form C (arc tooth with pre- and post-cut) tooth profile promotes clean chip formation and controlled cutting forces, which reduces thermal load on the blade and the workpiece. Fewer interruptions for blade care and a finer surface finish contribute to overall process efficiency, making the blade a practical option where throughput, repeatability and consistent component quality are priorities. For reliable, high-precision metal cutting with TECWERK blades, contact Metav Werkzeuge in Emmerich for tailored ordering and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000814198NW Product: Metal circular saw blade, TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 275 mm Teeth: 144 Kerf/width: 2.5 mm Bore diameter: 32 mm Pitch: 6 Tooth form: C Special features Material: HSS (high-speed steel) Coating: vaporised (anti-weld treatment) Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Designed for iron and steel applications Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas saws FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is designed primarily for iron and steel, with the HSS body and vapour-treated surface helping to prevent material build-up during cutting. How does the vaporised coating benefit cutting performance? The vaporised coating reduces adhesion and material welding on the teeth, which prolongs cutting performance and lowers cleaning and maintenance intervals for the blade. Which machine bore sizes and mounting patterns are supported? The blade has a central bore Ø 32 mm and multiple auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to match common mounting patterns on industrial circular saws. What type of cut finish can be expected with 144 teeth and Form C geometry? The 144-tooth count combined with the Form C arc tooth and pre/post-cut geometry produces a fine finish with reduced burr formation, suitable where minimal post-processing is desired. Is this blade compatible with my production saw? The blade is specified for use on a range of industrial saws, explicitly mentioning Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models; verifying bore and auxiliary hole layout against the machine spindle is recommended. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable high-performance cutting for iron and steel with reduced material build-up and precise mounting; combine HSS resilience, a vapour-treated surface and a 32 mm bore for stable operation. Order directly via Metav Werkzeuge or consult our specialists for machine compatibility and delivery. TECWERK Metal Circular Saw Blade BW, 300 mm, HSS, 220 Teeth The TECWERK metal circular saw blade designed for fine, high-tension cutting of iron and steel on industrial circular saw machines HSS construction with vapour-treated coating 300 mm diameter for fine separation 220 teeth with BW (arched) tooth form 32 mm bore with multiple side holes for stability High-precision cutting that reduces rework A blade with 220 teeth on a 300 mm diameter delivers a finer kerf and a smoother cut than coarse-toothed alternatives; this reduces the need for secondary finishing and shortens part turnaround. The BW tooth form (arched tooth with alternating chamfer) balances cutting aggression and surface quality, making it suitable where neat edges and tight tolerances matter. When used on compatible circular sawing machines, the result is consistent component dimensions and less scrap, which improves overall process efficiency. Less material welding, longer uptime The vapour-treated surface acts as a protective layer that discourages material from adhering to the cutting edge during operation. This vapour-treated finish significantly reduces build-up on the teeth when cutting ferrous materials, which in turn maintains cutting geometry and lowers the frequency of cleaning stops. Constructed from HSS, the blade tolerates the thermal and mechanical stresses of metal cutting better than standard carbon-steel alternatives, extending service intervals and reducing unexpected downtime in a production environment. Secure mounting and broad machine compatibility With a 32 mm central bore and multiple side holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm), the blade provides precise centring and secure clamping on a range of industrial saw spindles. The side-hole pattern helps to balance the disc and allows fitting to established machine interfaces; compatibility includes leading brands used in metalworking saws. Easy, repeatable mounting improves run-out behaviour, which helps maintain cutting quality batch after batch and supports predictable production scheduling. Engineered for workshop productivity and dependable supply Made for cutting iron and steel, this HSS circular blade is aimed at workshops and production lines that prioritise repeatable results and low-maintenance operation. The combination of a high tooth count and anti‑weld treatment reduces manual intervention, while the standardised bore and hole pattern minimise downtime during blade exchanges. Supplied through Metav Werkzeuge, customers benefit from a central European distribution hub and an assurance of consistent availability and post-sale reliability. Contact Metav Werkzeuge for tailored procurement from Emmerich—confirm machine fit and secure the TECWERK metal circular saw blade (SKU 2000814204NW) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814204NW Product: Metal circular saw blade Manufacturer: TECWERK Facts Diameter: 300 mm Blade width: 2.5 mm Bore diameter: 32 mm Number of teeth: 220 Tooth pitch: 4.5 mm Tooth form: BW (arched tooth) Special features Material: HSS Coating: vapour-treated Side holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Application: suitable for iron and steel materials Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this blade designed to cut? The TECWERK metal circular saw blade is specified for cutting iron and steel, utilising HSS construction and a vapour-treated surface to reduce material adhesion. Which machines will the blade fit? The blade fits common industrial circular sawing machines and is noted for compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models; verify spindle interface using the 32 mm bore and listed side-hole pattern. How does the vapour-treated coating benefit daily use? The vapour-treated finish minimises material build-up on the teeth during sawing, which maintains cutting performance and extends periods between maintenance for the TECWERK blade. What advantages does the BW tooth form provide? The BW (arched) tooth form with alternating chamfer combines a smooth cut edge with effective chip evacuation, resulting in improved surface finish and reduced post-processing. Is the blade easy to mount and balance? Yes; the central 32 mm bore and multiple side holes ensure precise centring and reliable clamping, supporting stable running and repeatable installation of the blade SKU 2000814204NW. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a combination of high material resilience and fine-tooth geometry for consistently smooth cuts in iron and steel. The vapour-treated HSS construction reduces material adhesion, while the slim 2.5 mm kerf and 200 teeth deliver precise results and minimise waste — order the blade via Metav Werkzeuge or consult the Metav team for machine compatibility. TECWERK metal circular saw blade D 300 mm, HSS, 200 teeth The TECWERK metal circular saw blade D 300 mm is a high-speed-steel circular blade engineered for fine cutting of iron and steel on industrial circular sawing machines 300 mm diameter for standard saw frames 200 teeth for fine, precise cuts 2.5 mm kerf for reduced material loss Vapour-treated HSS to reduce material build-up Precision finish with fine-tooth geometry for minimal rework Manufactured from HSS, this circular saw blade offers a balance of toughness and heat resistance that supports stable cutting conditions. The 200 teeth and a tooth pitch of 4.7 mm produce a fine finish that reduces the need for secondary processing; a high tooth count ensures smoother edges and a reduced risk of burr formation. The BW tooth profile — a bow tooth with alternating bevel — combines controlled chip formation with an even cutting action, which is particularly useful on demanding steel and iron workpieces. Reduced waste and faster throughput thanks to a slim kerf With a 2.5 mm kerf, the blade lowers material removal per cut, translating directly into material savings over repeated production runs and enabling more efficient use of costly bar or plate stock. The narrower cutting width also reduces cutting forces and may extend feed motor life on compatible sawing machines, contributing to a measurable improvement in workflow efficiency in metal workshops and small production lines. Vapour-treated surface to combat material adhesion The blade’s vapour-treated surface acts as a protective layer against material welding and build-up on the cutting edge. This treatment improves chip evacuation and maintains cutting performance for longer intervals between cleaning or dressing operations. For continuous or heavy-duty cutting of iron and steel, the vapour treatment supports consistent surface quality and reduces interruptions caused by material sticking to the teeth. Practical mounting and broad machine compatibility The blade is supplied with a 32 mm bore and multiple auxiliary holes (2 × 11/63 mm, 4 × 9/50 mm, 2 × 8/45 mm) to match a range of flange and mounting configurations. This makes it suitable for common circular sawing brands in industry, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines. Clear mounting allowances simplify changeovers and help ensure concentric running for a stable cut. Order this TECWERK HSS circular saw blade from Metav Werkzeuge for reliable stock and local technical guidance; Metav Werkzeuge in Emmerich provides a European quality filter and can advise on machine compatibility and procurement — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 2000814203NW Name: TECWERK metal circular saw blade D 300 mm, HSS, BW tooth, 200 teeth Core specifications Diameter: 300 mm Kerf (width): 2.5 mm Teeth: 200 Bore diameter: 32 mm Tooth pitch: 4.7 mm Special features Material: HSS Coating: vapour-treated (protection against material adhesion) Tooth form: BW (bow tooth with alternating bevel) Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Suitable for iron and steel workpieces Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ How fine is the cutting finish achievable with this blade? The TECWERK metal circular saw blade with 200 teeth and a 4.7 mm tooth pitch provides a fine cutting finish that typically reduces the necessity for secondary deburring on iron and steel components. Is the blade suitable for continuous industrial use? Yes. The HSS construction combined with a vapour-treated surface reduces heat-related wear and material adhesion, supporting longer operating intervals under continuous use on appropriate circular sawing machines. Which machines will accept the 32 mm bore and auxiliary hole pattern? The blade’s 32 mm bore and the specified auxiliary holes match flanges and adapters used by many standard circular saw manufacturers, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, enabling straightforward installation in those systems. What benefits does the BW tooth form deliver for steel cutting? The BW bow tooth with alternating bevel gives balanced cutting action and controlled chip formation, which helps to achieve consistent edge quality and reduces the chance of tooth overload when cutting dense materials. How does the vapour treatment affect maintenance intervals? The vapour-treated surface reduces material build-up on the teeth, which typically extends the period between cleaning or dressing operations and helps preserve cutting performance during longer production runs. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from the blade’s combination of high-speed steel construction, vapour-treated anti-weld coating and a fine BW tooth form for efficient, long-lasting metal cutting; available directly via Metav Werkzeuge or on request through the technical consultants. Metal circular saw blade, Form BW, Ø 300 mm, 2.5 mm kerf, HSS, bore Ø 40 mm, 200 teeth – TECWERK The Metal circular saw blade, Form BW delivers precise, narrow-kerf cutting for steel and iron applications on compatible industrial circular saw machines. High-speed steel construction Vapour-treated anti-weld coating 200 teeth, BW (bow) tooth form Bore Ø 40 mm with auxiliary holes Consistent fine cuts for steel fabrication The HSS body and 200 teeth provide a balance of cutting smoothness and dimensional control, making the blade well suited for workpieces where a fine finish matters. A 2.5 mm kerf minimises material loss and reduces cutting forces, which supports longer runs and improved throughput on production lines. The high tooth count in combination with the BW tooth geometry reduces vibration and promotes stable feeding at the typical cutting speeds of band and circular saw systems. Less material build-up, longer service intervals A vapour-treated coating acts as an anti-weld barrier, lowering the tendency for chips to adhere to the gullet and tooth face during ferrous metal cutting. This surface treatment complements the high-speed steel core by reducing thermal adhesion and maintaining sharper cutting edges for longer periods. The result is extended tool life and fewer interruptions for cleaning or reconditioning, which supports smoother operational planning and predictable maintenance cycles. Reliable fit and broad machine compatibility The blade features a bore Ø 40 mm with auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) for secure mounting and alignment on common circular saw models. Compatibility is specified for established brands such as Eisele, Ulmia, Trennjäger, Rekord and Ultra, enabling straightforward integration into existing workshop equipment. The combination of standardised mounting and robust HSS construction ensures consistent performance across repeated job setups and varied steel-cutting tasks. Choose TECWERK blades via Metav Werkzeuge for reliable, precision metal cutting — contact Metav Werkzeuge for precise compatibility checks and supply from our Emmerich location. Technical data Article number: 2000814180NW Label: Metallkreissägeblatt Form BW D.300mm B.2,5mm HSS Bohrungs-D.40mm Z.200 TECWERK Facts Diameter: 300 mm Bore diameter: 40 mm Width (kerf): 2.5 mm Teeth: 200 Pitch: 5 Packaging unit: 1 Special features Material: High-speed steel (HSS) Coating: vapour-treated (anti-weld) Tooth form: BW (bow tooth) with alternating chamfer Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatibility: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ Is this blade suitable for cutting untreated steel? The Metal circular saw blade, Form BW is designed for iron and steel materials; its HSS substrate and vapour-treated surface reduce welding and support clean cuts in untreated steel. What mounting options are provided with the blade? The blade includes a bore Ø 40 mm plus auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) for secure mounting on compatible circular saws; these features ensure proper alignment and stability during operation. How does the BW tooth form affect cutting results? The BW (bow) tooth form with alternating chamfer offers a fine finish and controlled chip formation, which helps the blade achieve smooth edges and reduced burrs on steel workpieces. Can the blade be reground or reconditioned? The high-speed steel construction of the TECWERK metal circular saw blade permits professional regrinding; the vapour-treated coating may require reapplication or conditioning during refurbishment to restore anti-weld performance. What benefits does the narrow 2.5 mm kerf provide? A 2.5 mm kerf reduces material waste and cutting force, enabling higher cutting efficiency and lower energy consumption per cut while preserving dimensional accuracy. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precise cutting, long tool life and reduced rework thanks to the combination of HSS construction, a vapour-treated anti-weld surface and a narrow 2.5 mm kerf; purchase via Metav Werkzeuge or contact the consultants for tailored advice. TECWERK metal circular saw blade — BW tooth form, 300 mm, HSS, 40 mm bore, 220 teeth TECWERK metal circular saw blade — BW tooth form, 300 mm diameter, HSS construction with vapour-treated coating for efficient cutting of iron and steel on industrial sawing machines. HSS body with vapour-treated anti-weld coating BW arc tooth form with alternate bevel 300 mm diameter, 40 mm bore with side holes Designed for Eisele, Ulmia, Rekord and Ultra machines Durable, high-precision cuts from HSS construction The HSS blade is engineered for repeated use in metalworking environments where cut quality and tool life matter. With a 300 mm diameter and a narrow 2.5 mm cutting width, the saw offers a thin kerf that reduces material loss and minimises the need for secondary finishing. The high tooth count of 220 teeth supports finer, more consistent cuts on ferrous materials, lowering scrap rates and improving component fitment without sacrificing process speed. Less stoppage through vapour-treated anti-weld protection A vapour-treated surface reduces the tendency for material to adhere to the cutting edge, preventing build-up that would otherwise require frequent cleaning or edge dressing. This anti-weld effect keeps the blade running cooler and maintains tooth geometry for longer, which translates into fewer production interruptions and lower lifetime operating costs. The coating is particularly beneficial when cutting sticky or gummy steels that can cause weld-on deposits. Tooth geometry optimised for ferrous materials The BW tooth form (arc tooth with alternate bevel) delivers reliable chip breaking and clean edge formation on iron and steel. Alternate bevels help control burr formation and promote efficient chip evacuation, making the blade suitable for demanding separation tasks. For workshops and production lines where precision and edge quality affect downstream processes, the tooth profile reduces rework and improves assembly readiness of cut parts. Practical mounting and machine compatibility for fast integration Mounting is straightforward thanks to the 40 mm bore and the set of side holes (2 x 8/55 mm; 4 x 12/64 mm) that ensure secure seating and improved cooling or clamping options on many industrial saws. The blade is specified for common saw models from Eisele, Ulmia, Trennjäger, Rekord and Ultra, so integration into existing equipment is typically rapid and reliable. This compatibility allows production to resume quickly with minimal setup time. Choose the TECWERK metal circular saw blade for cleaner, longer-lasting cuts; contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814182NW Product label: Metallkreissägeblatt Form BW D.300mm B.2,5mm HSS Bohrungs-D.40mm Z.220 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Packaging unit: 1 Dimensions & core data Diameter: 300 mm Cutting width: 2.5 mm Teeth: 220 Pitch: 4.5 mm Bore diameter: 40 mm Side holes: 2 x 8/55 mm; 4 x 12/64 mm Materials & special features Material: HSS Coating: vapour-treated Tooth form: BW (arc tooth) with alternate bevel Application: iron and steel Compatible machines: Eisele, Ulmia, Trennjäger, Rekord, Ultra FAQ What materials can be cut with this blade? The TECWERK metal circular saw blade is designed specifically for iron and steel, providing clean cuts and controlled chip formation on these ferrous materials. How does the vapour-treated coating help in production? The vapour-treated surface reduces material adhesion to the teeth, offering anti-weld protection that keeps the blade cooler and reduces downtimes for cleaning or maintenance. Is the blade compatible with my industrial saw? Compatibility covers a range of common industrial saws; the blade fits machines from Eisele, Ulmia, Trennjäger, Rekord and Ultra, using the 40 mm bore and the specified side-hole pattern for secure mounting. What cutting quality can be expected from the BW tooth form? The BW arc tooth with alternate bevel yields fine, burr-reduced cuts and improved chip control, particularly beneficial where surface finish and dimensional accuracy are required. How does the tooth count affect performance? A high tooth count, such as 220 teeth on a 300 mm blade, produces a finer cut and smoother edge, reducing the need for post-cut finishing and decreasing scrap. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

The combination of HSS construction, a vapour-treated anti-weld finish and a fine 120-tooth geometry ensures clean, reliable metal cutting with minimal material loss; order the blade directly via Metav Werkzeuge or consult the technical team for machine compatibility and rapid supply. TECWERK metal circular saw blade, Form C – Ø300 mm, HSS, 120 teeth The TECWERK metal circular saw blade, Form C is a precision cutting tool designed for industrial circular saws and heavy-duty workshop machines, optimised for ferrous materials such as iron and steel. High-speed steel (HSS) construction Vapour-treated anti-weld coating 300 mm diameter, 120 teeth for fine cuts 32 mm bore with multiple auxiliary holes Accurate cuts with minimal kerf and excellent surface finish The combination of a 300 mm diameter, a narrow 2.5 mm kerf and 120 teeth produces a fine cutting action that reduces burr formation and preserves material. A higher tooth count contributes to a smoother surface and reduces the need for secondary finishing on many iron and steel sections. For production runs where material yield and consistent part quality matter, the narrow kerf conserves stock and lowers waste while maintaining dimensional reliability. Robust cutting performance thanks to HSS and vapour-treated protection Constructed from HSS, the blade offers high toughness and thermal stability for demanding cutting tasks, while the vapour-treated surface acts as a barrier against material buildup on the teeth. This treatment reduces the tendency for chips to weld to the cutting edges when machining ferrous workpieces, extending service life and maintaining cutting geometry for longer intervals between maintenance. The result is reliable throughput with fewer interruptions for cleaning or dressing. Form C tooth geometry and secure mounting for stable operation The Form C tooth profile — an arced tooth with both leading and trailing cutting edges — is engineered for controlled chip formation on tough metals, delivering a balance between cut quality and feed capability. The blade’s 32 mm bore and the set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) facilitate secure mounting and improved stability on compatible saw machines, helping to reduce vibration and maintain concentricity during high-volume work. These features contribute directly to repeatable results on industrial saw platforms. Workshop integration and machine compatibility for efficient production Designed for use on established circular saw systems, the blade matches machine families such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, enabling straightforward replacement and quick recommissioning. Supplied as a single unit, the tool fits common industrial setups where consistent cut quality and dependable service are priorities. Proper mounting and routine inspection preserve balance and extend operational life, supporting uninterrupted production cycles and reducing unplanned downtime. For precise selection and rapid supply of TECWERK HSS circular saw blades, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and reliable delivery from Emmerich Technical data SKU: 2000814201NW Product: Metal circular saw blade Brand: TECWERK Bore diameter: 32 mm Diameter: 300 mm Kerf/width: 2.5 mm Teeth: 120 Tooth form: C Facts Pitch / division: 8 Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Packaging unit: 1 Special features Material: HSS Coating: vapour-treated (anti-weld protection) Suitable for iron and steel applications Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ Which materials is this blade suitable for? The TECWERK metal circular saw blade is designed primarily for iron and steel workpieces; the HSS substrate and vapour-treated finish support cutting performance on ferrous materials. What does vapour-treated mean for blade performance? Vapour-treated indicates a protective surface treatment that reduces material adhesion and weld buildup on the teeth, maintaining sharpness and improving service life of the blade. How does the Form C tooth geometry affect cutting? Form C (arched tooth with pre- and post-cut edges) produces controlled chips and a smooth finish on tougher metals, balancing surface quality with feed stability during cutting. Is the blade compatible with my circular saw? The blade’s 32 mm bore and auxiliary hole pattern allow mounting on many industrial circular saw platforms, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines. Can the blade be re-sharpened and reused? The HSS construction supports re-sharpening where appropriate; reconditioning should follow standard workshop procedures to preserve tooth geometry and balance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of high-speed steel construction, vapour-treated protection and a fine 120-tooth geometry for consistent, burr-free cuts in iron and steel; order through Metav Werkzeuge or request expert advice for application-specific recommendations. TECWERK 300 mm metal circular saw blade – HSS, 120 teeth, vapour-treated The TECWERK 300 mm metal circular saw blade designed for precision sawing of iron and steel on a wide range of circular saw machines High-speed steel (HSS) construction Vapour-treated to reduce material weld-up 300 mm diameter for larger cuts 120 teeth for fine metal cutting Precise, consistent cuts in ferrous materials Constructed from HSS (high-speed steel) and configured with 120 teeth, this circular saw blade delivers a fine cutting action that reduces burring and minimises secondary finishing. The dense tooth count and controlled tooth geometry allow for a smooth cut edge and predictable chip formation when working with iron and steel, leading to improved part quality and reduced rework. The blade’s dimensions ensure stability for medium to large section cutting while maintaining accuracy. Reduced material build-up for longer tool life The blade surface is vapour-treated, a thermal/chemical treatment that acts as a protective layer to reduce material adhesion during cutting. Combined with the arc-shaped teeth (tooth form C) featuring primary and secondary cutting edges, the treatment decreases weld-up and preserves the cutting geometry for a longer service interval. This results in more reliable performance across repetitive production runs and lower frequency of blade dressing or replacement. Designed for straightforward integration and reliable operation With a 40 mm bore diameter and auxiliary hole pattern of 2 x 8/55 mm; 4 x 12/64 mm, the blade is compatible with common metal-cutting circular saw machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models. The nominal 2.5 mm blade width provides a balance between kerf efficiency and rigidity, helping to reduce material waste while maintaining straight cutting lines. The combination of stable mounting geometry and tailored tooth form supports consistent throughput in workshop and production environments. For robust, high-precision cutting with the TECWERK 300 mm HSS blade, contact Metav Werkzeuge for stock and application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000814176NW Label: Metallkreissägeblatt Form C D.300mm B.2,5mm HSS Bohrungs-D.40mm Z.120 TECWERK Manufacturer: TECWERK Facts Diameter: 300 mm Width: 2.5 mm Bore diameter: 40 mm Teeth: 120 Pitch: 8 Special features Material: HSS Coating: vapour-treated Tooth form C: arc-shaped teeth with primary and secondary cutting edges Side/auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm For iron and steel materials Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra machines Packaging unit: 1 FAQ Is this blade suitable for steel cutting? The TECWERK 300 mm metal circular saw blade is specified for iron and steel and the HSS construction combined with the 120-tooth geometry provides appropriate cutting action for such materials. What does vapour-treated mean for blade performance? Vapour-treated denotes a surface treatment applied to the blade that reduces material adhesion and weld-up during cutting, extending the effective life and preserving tooth geometry of the TECWERK blade. Which machines is the blade compatible with? The blade’s 40 mm bore and auxiliary hole pattern match mounting configurations for Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines, enabling straightforward integration. How does the tooth form C affect the cut quality? Tooth form C with arc-shaped teeth and primary/secondary cutting edges promotes smooth chip formation and a finer finish, which reduces the need for downstream deburring on metal parts. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS construction and a steam‑treated coating to reduce material adhesion and extend service intervals; the high tooth count and narrow kerf deliver smooth cuts in ferrous metals while keeping material loss low. Order the blade directly via Metav Werkzeuge or consult the team for application-specific advice. Metal circular saw blade Form C — 300 mm, HSS, 160 teeth (TECWERK) The Metal circular saw blade Form C offers fine, low‑vibration cutting of iron and steel in workshop and light‑industrial settings, combining high tooth density with a protective surface treatment for consistent performance HSS construction for demanding metal cutting Steam‑treated coating to reduce material welding 160 fine teeth for smooth, low‑vibration cuts 32 mm bore with multiple auxiliary holes Precision cutting where material quality matters The blade's HSS body and 160 teeth are engineered for controlled material removal and a fine finish on ferrous workpieces. A higher tooth count reduces the chip size and the tendency to chatter, resulting in smoother edges and less post‑machining work. With a diameter of 300 mm and a narrow kerf of 2.5 mm, the design balances cutting efficiency and material savings: thin cut width lowers scrap while retaining stability during operation. For production environments where repeatability matters, the combination of tooth geometry and material choice translates into predictable cycle times and fewer rejects. Less downtime through reduced weld‑on and longer blade life The steam‑treated coating acts as a chemical and physical barrier, helping to prevent material welding at the cutting edge when working with sticky or heat‑sensitive steels. This treatment lowers cleaning intervals and decreases the frequency of blade dressing or replacement, which in turn reduces unplanned downtime. Explained simply: a treated surface keeps chips and material deposits from adhering, so the blade maintains cutting efficiency longer. The Blade's C‑tooth profile (bow tooth with lead and trail cutting edges) improves chip evacuation and contributes to a consistently clean cut, particularly useful when processing long sections or batch runs. Simple mounting and broad machine compatibility The saw blade is centred on a 32 mm bore, with multiple auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) to suit stabilising pins and flanges common on industrial saws. This configuration ensures secure seating and minimal run‑out when fitted to compatible circular saw machines used in metalworking. The blade was designed to fit a range of manufacturers' machines, making it a practical spare or replacement for established workshop setups. Clear mechanical fitment reduces setup time and supports efficient tool changeovers during planned maintenance windows. For tailored recommendations on the TECWERK metal circular saw blade and its best application in a specific production line, contact Metav Werkzeuge in Emmerich for direct advice and stock information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814202NW Product type: Metal circular saw blade Manufacturer brand: TECWERK SKU: 2000814202NW Facts Diameter: 300 mm Kerf / width: 2.5 mm Teeth: 160 Bore diameter: 32 mm Division: 6 Special features Material: HSS Coating: steam‑treated (vaporised) for protection against material welding Tooth form: C (bow tooth with lead and trail cutting edges) Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Application: for iron and steel workpieces Suitable for: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ Which materials is the blade designed to cut? The TECWERK metal circular saw blade (SKU 2000814202NW) is intended for iron and steel workpieces and is optimised for ferrous materials. How does the steam‑treated coating help in daily use? The steam‑treated coating on this saw blade reduces material welding to the tooth tips, which lowers cleaning intervals and extends useful service life. What does tooth form C mean for cutting results? Tooth form C denotes a bow tooth with lead and trail cutting edges, improving chip breakage and producing a finer edge suitable for demanding metalworking tasks. Can this blade be mounted on different circular saw machines? Yes — the 32 mm bore plus multiple auxiliary holes allow mounting on a range of industrial circular saws that accept these configurations. What cutting quality can be expected with 160 teeth? A 160‑tooth configuration produces smooth, low‑vibration cuts and minimal burr, reducing the need for finishing work and maintaining dimensional accuracy. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a precise 300 mm HSS blade with a slim 2.5 mm kerf and 160 teeth for consistent, high-quality cuts in ferrous materials; its vapour-treated surface reduces material welding and extends service intervals. Order or request technical advice from Metav Werkzeuge for a seamless supply and machine fit. TECWERK Metal circular saw blade, Form C — 300 mm, HSS, 160 teeth The TECWERK metal circular saw blade Form C is a high-speed-steel blade designed for fine, low-spark cutting of iron and steel on dedicated metal-cutting circular saws 300 mm diameter for robust metal cutting HSS, vapour-treated to resist weld-on 160 teeth, C tooth form for fine cuts 40 mm bore with multiple auxiliary holes Higher throughput and finer edges for ferrous workpieces The combination of 160 teeth and a narrow 2.5 mm kerf delivers a balance of cutting speed and finish: reduced material loss and minimal secondary finishing. As a result, production runs achieve consistent edge quality and fewer rejected parts, which supports cost-efficiency in batch work. The blade geometry — a C tooth form with leading and trailing cutting edges — promotes chip control and lowers vibration, enabling steadier feeds on horizontal and vertical metal saws. Longer service life through HSS and vapour treatment Manufactured from HSS (high-speed steel) and finished with a vapour-treated surface, the blade resists edge build-up and local welding of swarf. The coating reduces thermal adhesion during cutting, which in turn preserves cutting edges and delays re-sharpening intervals. For workshops processing ferrous stock, this means fewer blade changes and more predictable maintenance cycles, supporting continuous production and reduced downtime. Secure mounting and broad machine compatibility A 40 mm central bore and a pattern of auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) ensure accurate seating and secure fixation on common metal-cutting circular saw machines. The blade is specified for use on Eisele, Ulmia, Trennjäger, Rekord and Ultra saw models, enabling straightforward retrofits and rapid replacement. Clear mounting geometry improves run-out stability and contributes to precise, repeatable cuts across long series. Contact Metav Werkzeuge for tailored technical advice and reliable supply of TECWERK blades from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machine fit and lead times Technical Data SKU: 2000814178NW Product: Metal circular saw blade Brand: TECWERK Diameter: 300 mm Bore diameter: 40 mm Tooth count: 160 Facts Kerf / blade width: 2.5 mm Tooth form: C Pitch / division: 6 Material: HSS Special features Coating: vapour-treated (protection against material weld-on) Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Application: iron and steel cutting Compatible machines: Eisele, Ulmia, Trennjäger, Rekord, Ultra Packaging unit: 1 FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is designed primarily for iron and steel cutting and is vapour-treated to reduce welding during ferrous machining. How does the vapour treatment benefit workshop use? Vapour treatment on the HSS blade reduces material adhesion and edge build-up, which extends service intervals and improves cut consistency for ferrous workpieces. Is the blade compatible with standard saw arbors? Yes. The blade has a 40 mm central bore and multiple auxiliary holes to match common mounting patterns on Eisele, Ulmia, Trennjäger, Rekord and Ultra metal saws. What cut quality can be expected with the C tooth form? The C tooth form (curved tooth with front and back cutting edges) promotes fine cutting action and effective chip evacuation, resulting in a smoother finish and reduced vibration. Can the blade be used for non-ferrous metals? The specification focuses on iron and steel; for non-ferrous applications, consult technical guidance to confirm optimal tool selection. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Robust cutting performance from a vapour-treated HSS body and a fine BW tooth form delivers precise cuts in ferrous materials; combine the 315 mm diameter and 2.5 mm kerf for efficient material removal with minimal loss. Order the blade directly via Metav Werkzeuge or consult our specialists for machine-specific advice. TECWERK Metal circular saw blade BW, Ø 315 mm, HSS, 250 teeth The TECWERK metal circular saw blade BW Ø315 mm is a high‑precision cutting tool engineered for fine separation of iron and steel on industrial circular saw machines. HSS construction, vapour-treated anti-weld-up 315 mm diameter with 2.5 mm kerf 250 BW teeth for fine metal cutting 40 mm bore with 2×8/55 and 4×12/64 holes High‑precision cutting for ferrous materials The blade’s HSS construction combined with a dense tooth count of 250 teeth and the BW tooth form yields consistently fine, burr‑reduced cuts in iron and steel. A narrow 2.5 mm kerf reduces material waste and lowers cutting forces, which can extend tool and machine life while maintaining cycle efficiency. This balance of thin kerf and a high tooth count makes the blade suitable where both surface quality and productivity matter. Coating and tooth geometry minimise build‑up and downtime A vapour-treated surface acts as a protective layer against material adhesion and welding onto the cutting edge, improving heat management and tool life when sawing ferrous alloys. The arc‑shaped BW teeth with alternating bevel grinding support smooth chip flow and reduce vibration, so fewer regrinds are needed and process stability improves. These characteristics translate directly into reduced downtime and more predictable maintenance cycles. Fit, stability and machine compatibility The blade’s 40 mm bore and additional mounting holes (2 × 8/55 mm and 4 × 12/64 mm) provide secure seating and compatibility with a range of industrial circular saw frames. Designed for use on common brands of metal saws such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models, the blade ensures reliable centring and coaxial running for accurate, repeatable cuts. Where precise alignment is required, the auxiliary holes support stable clamping and vibration damping. Practical advantages in everyday workshop use Through its robust HSS body and anti‑adhesion treatment, the blade tolerates continuous operation on demanding workpieces without rapid loss of geometry. The combination of high tooth density and the BW profile results in reduced burr formation and improved finish, which lowers downstream deburring effort. For workshops that prioritise precision and uptime, the blade offers a measurable improvement in process quality and workflow predictability. For availability, machine compatibility checks or tailored cutting recommendations for the TECWERK 315 mm HSS circular saw blade, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our specialists will advise on the right configuration for each application Technical data Article number: 2000814190NW Product name: Metallkreissägeblatt (metal circular saw blade) TECWERK Manufacturer: TECWERK Numbers / Core technical data Diameter: 315 mm Width / kerf: 2.5 mm Teeth: 250 Bore diameter: 40 mm Pitch / parting: 4 Special features / Versions Material: HSS Coating: vapour-treated (anti-weld-up) Tooth form: BW (arc tooth) with alternating bevel Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Application: for iron and steel materials Compatible with: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ Which materials is this blade suitable for? The TECWERK metal circular saw blade is designed for iron and steel materials; the HSS substrate and vapour-treated surface reduce weld‑up during ferrous cutting. How does the vapour-treated coating help in practice? The vapour-treated finish on the HSS blade minimises material adhesion and improves heat resistance, extending the effective life of the cutting edges under continuous use. What does BW tooth form mean for cut quality? The BW (arc) tooth profile with alternating bevel produces fine chips and a smooth cut face, resulting in less burr and superior surface finish compared with coarse tooth patterns. Is the blade compatible with my industrial saw? With a 40 mm bore and the listed auxiliary holes, the blade fits many industrial frames; confirm compatibility by referencing the mounting pattern against the saw’s arbor and hole layout. For model checks, mention SKU 2000814190NW. How often should the blade be reconditioned? Reconditioning frequency depends on cutting speed, feed and material; the vapour-treated HSS construction reduces adhesion and wear, but periodic inspection and professional sharpening will preserve cutting accuracy and life. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Reliable cutting performance from HSS construction and a vapour-treated anti-weld finish ensures longer service life and fewer stoppages; combined with a fine 2.5 mm kerf and 160 teeth for smooth edges, this blade supports efficient metalworking flows. Order directly via Metav Werkzeuge or consult our technical advisors for machine compatibility. TECWERK Metal Circular Saw Blade Form C — 315 mm, HSS, 160 teeth The TECWERK metal circular saw blade Form C is designed for precise, continuous cutting of iron and steel on stationary circular sawing systems, delivering fine finishes with reduced material build-up. HSS with vapour-treated anti-weld coating Fine 2.5 mm kerf with 160 teeth 32 mm bore with multiple mounting holes Longer runtimes through anti-weld surface treatment Built from HSS and finished with a vapour-treated surface, this circular saw wheel minimises material adhesion during cutting, which reduces the frequency of stoppages for cleaning and sharpening. The protective treatment acts as an anti-weld barrier under typical steel-cutting conditions, preserving the cutting edge and lowering tool-change intervals. For production environments where uptime and repeatable throughput matter, this translates into measurable gains in daily output and predictable cycle times. Fine kerf geometry for smooth component edges With a 2.5 mm cut width and 160 teeth arranged in Form C (arc tooth with front and back cutting edges), the blade produces narrow kerfs and consistently smooth surfaces on workpieces. The tooth geometry reduces burr formation and eases subsequent handling or finishing operations, meaning fewer rework steps and improved first-pass quality. In practical terms, less material removal per cut also reduces cut forces, which benefits machine wear and energy consumption in high-volume setups. Secure mounting and broad machine compatibility The central 32 mm bore is complemented by multiple auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to match standard flange patterns, enabling straightforward installation on a range of stationary saws. Compatibility with leading manufacturers such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas helps to simplify procurement and spare-parts planning. The precise mounting geometry maintains runout tolerances and supports stable cutting performance even at sustained operating speeds. Recommended applications and maintenance advice Optimised for cutting iron and steel, this blade is suited to metal workshops and industrial sawing lines requiring high-quality sectioning and minimal contamination. Regular inspections for tooth wear and prompt replacement when the edge geometry degrades will preserve surface quality and throughput. When uncertainty arises about machine settings or cutting parameters, specifying the blade by its SKU ensures accurate matching: the item is referenced under SKU 2000814207NW and supplied by TECWERK for professional saw systems. For a tailored recommendation or to secure the correct mounting variant for a specific saw model, contact Metav Werkzeuge — our specialists in precision tools will advise and supply directly from Emmerich. Technical data Article number: 2000814207NW Product: Metal circular saw blade Manufacturer: TECWERK Diameter: 315 mm Blade width: 2.5 mm Bore diameter: 32 mm Teeth: 160 Tooth form: C Material: HSS Coating: vapour-treated Pitch: 6 Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Packaging unit: 1 Facts Diameter: 315 mm Blade width: 2.5 mm Bore Ø: 32 mm Teeth: 160 Pitch: 6 SKU: 2000814207NW Special features Vapour-treated surface for anti-weld protection Suitable for iron and steel materials Tooth shape Form C: arc tooth with front and back cutting edges Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas saw machines Multiple auxiliary mounting holes for secure fitting FAQ What materials can this blade cut effectively? The TECWERK metal circular saw blade Form C is intended for cutting iron and steel and is vapour-treated to reduce material welding on the cutting edge. How is the blade mounted to different machines? Mounting is achieved via the 32 mm central bore and the set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm), allowing the blade to match common flange patterns on many stationary saw systems. What does Form C tooth geometry mean for the finish? Form C denotes an arc-shaped tooth with pre- and post-cutting edges; this geometry, as implemented on this blade, produces narrow kerfs and smoother edges with reduced burrs. Is this blade compatible with Mep and Kasto machines? Yes — the blade is listed as compatible with saws from manufacturers including Mep and Kasto; identify the correct mounting variant by referring to SKU 2000814207NW. How often should the blade be inspected or replaced? Inspection frequency depends on cutting workload; regular checks for tooth wear and adherence to the vapour-treated surface condition are recommended to maintain the blade’s performance and finish quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining HSS‑Co construction, a vapour‑treated coating and a 315 mm diameter with 160 fine teeth, this blade offers durable, anti‑weld cutting performance on stainless and other high‑strength steels; order the right configuration directly via Metav Werkzeuge or consult their specialists for application support. TECWERK metal circular saw blade (Form C) – 315 mm, HSS‑Co, 160 teeth The TECWERK metal circular saw blade (Form C) is designed for precision cutting of stainless and other high‑strength steels on industrial circular saw machines. HSS‑Co construction for high durability Vapour‑treated coating prevents material welding 315 mm diameter with 160 fine teeth 40 mm bore with multi‑hole mounting Durable HSS‑Co body for continuous industrial use The blade is manufactured from HSS‑Co (cobalt high‑speed steel), a material chosen for its combination of hardness and toughness that sustains repeated cutting loads. The vapour‑treated surface acts as a protective barrier to reduce material adhesion and to lower the risk of tooth build‑up during prolonged stainless steel cutting. For production environments that demand reliability, the use of cobalt‑enriched high‑speed steel translates into extended service life and more consistent cut quality under high thermal and mechanical stress. Fine tooth geometry for low burr, high finish quality With 160 teeth and Form C tooth geometry (a bow tooth with alternating chamfer), the blade delivers a fine, controlled cut that reduces secondary finishing. The high tooth count and alternating chamfer help to distribute cutting forces and minimise burr formation, which is particularly beneficial when working with stainless steel and other high‑strength alloys. The blade’s 40 mm bore and multi‑hole pattern ensure secure mounting and compatibility with common industrial circular saw frames, enabling precise concentricity and stable rotation at typical operating speeds. Optimised kerf and mounting for efficient processes A narrow 2.5 mm kerf reduces material waste while maintaining cutting stability, supporting cost‑efficient throughput where material yield is important. The blade’s multi‑hole arrangement (2 × 8/55 mm; 4 × 12/64 mm) allows straightforward alignment on a range of industrial saws. Tooth pitch 6 offers a balance between aggressive chip removal and surface finish, making the blade suited to continuous production or intermittent high‑precision cuts. Where welding of chips to the tooth is a concern, the vapour treatment helps to lower adhesion and keep the blade running cleaner between maintenance intervals. Contact Metav Werkzeuge to discuss the TECWERK HSS‑Co blade for specific machine compatibility and material requirements; Metav Werkzeuge’s technical advisors in Emmerich can advise on the best configuration and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814221NW Manufacturer: TECWERK Product: Metal circular saw blade (Form C) Label: Metallkreissägeblatt Form C D.315mm B.2,5mm HSS‑Co Bohrungs‑D.40mm Z.160 TECWERK Facts Diameter: 315 mm Blade width (kerf): 2.5 mm Teeth: 160 Bore diameter: 40 mm Pitch: 6 Tooth type: Form C Packaging unit: 1 Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: vapour‑treated for anti‑weld protection Suitable for: stainless steel and other high‑strength steels Mounting: 2 × 8/55 mm and 4 × 12/64 mm side holes Tooth geometry: bow tooth with alternating chamfer Compatible with: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is the TECWERK metal circular saw blade best suited for? The TECWERK metal circular saw blade is optimised for stainless steel and other high‑strength steels; its HSS‑Co composition and vapour‑treated surface reduce chip welding and improve performance on these materials. How does the vapour‑treated coating affect cutting performance? The vapour‑treated coating on the TECWERK blade reduces material adhesion at the tooth edge, lowering the likelihood of weld build‑up and maintaining cutting efficiency over longer production runs. Is the 40 mm bore compatible with common industrial saws? Yes, the blade’s 40 mm bore plus the multi‑hole pattern (2 × 8/55 mm; 4 × 12/64 mm) provides versatile mounting options for many industrial circular saw frames, ensuring stable concentric mounting. What finish can be expected with 160 teeth and Form C geometry? The combination of 160 teeth and Form C (bow tooth with alternating chamfer) yields a fine finish with reduced burr formation, suitable for applications where surface quality is important. How does the 2.5 mm kerf benefit production? A 2.5 mm kerf reduces material loss per cut and supports efficient throughput while keeping the blade rigid enough for precise cutting in industrial applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-performance HSS‑Co construction and a vapour-treated coating that reduces material build-up for consistent, fine metal cutting; order directly via Metav Werkzeuge or consult the team for application-specific advice. TECWERK metal circular saw blade — 315 mm, HSS‑Co, 120 teeth A TECWERK metal circular saw blade engineered for cutting stainless and other high-strength steels with a fine C tooth form suitable for industrial circular saw machines HSS‑Co for high wear resistance Vapour-treated to prevent material build-up 315 mm diameter with 2.5 mm kerf 120 teeth, C tooth form for fine metal cuts Optimised cutting performance and longer service intervals The HSS‑Co alloy core delivers a good balance of toughness and hardness, enabling reliable cutting at elevated speeds while resisting edge chipping. Combined with the vapour-treated surface, the blade experiences reduced adhesion of workpiece material, which diminishes the need for frequent cleaning and maintains cutting precision. These technical choices translate into fewer interruptions, lower tool-change frequency and a steadier production flow for workshops working with demanding alloys. Precise cuts on stainless and high-strength steels With a C tooth form (arc tooth with raker and gullet cutters) and 120 teeth, the geometry is tuned for fine, burr-minimised cuts in stainless and other high-strength steels. The slim 2.5 mm kerf reduces material loss while the high tooth count produces a smoother edge finish, decreasing the requirement for subsequent machining. For users unfamiliar with tooth forms: the C profile combines a main cutting edge with small raker cutters to clear chips efficiently and produce a clean cut on difficult-to-machine metals. Design elements that reduce welding-up and improve reliability The blade features a central 32 mm bore and multiple auxiliary holes arranged for stable mounting and heat dissipation. The vapour-treated surface acts as a protective layer against material welding to the tooth tips under high cutting temperatures, preserving the cutting geometry longer. These design details reduce the risk of smoke, scoring and premature tooth wear, supporting continuous operation on saws that demand consistent throughput. Compatibility, handling and fitment guidance This circular saw blade is designed for standard industrial circular saw machines and fits models from recognised manufacturers in the sector. The configuration of auxiliary holes allows secure clamping and balanced running. For optimal results, select appropriate cutting speeds and feeds for the specific grade of stainless or high-strength steel; correct setup further extends the life of the blade and improves cut quality. For machine match questions or cutting parameter recommendations, tailored guidance is available. Contact Metav Werkzeuge for a bespoke fitment recommendation and rapid supply – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 2000814219NW Manufacturer: TECWERK Product type: Metal circular saw blade Facts Diameter: 315 mm Kerf/Width: 2.5 mm Teeth: 120 Bore diameter: 32 mm Division: 8 Special features Material: HSS‑Co Coating: vapour-treated Toothing: C (arc tooth with raker and gullet cutters) Auxiliary holes: 2 x 11/63 mm, 4 x 9/50 mm, 2 x 8/45 mm Suitability: stainless steel and other high-strength steels Compatibility: intended for industrial circular saw machines FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is designed primarily for stainless steel and other high-strength steels, making it suitable for demanding metal-cutting applications. How does the vapour-treated coating help in practice? The vapour-treated surface reduces material build-up on the teeth during cutting, which helps maintain cutting performance and extends service intervals for the blade. What does the C tooth form deliver compared with standard teeth? The C tooth form provides a fine cut with reduced burr formation by combining a main cutting edge and raker cutters, ideal for producing smooth edges on tough metals. Is the blade compatible with common industrial saw brands? Yes, the blade’s mounting hole pattern and 32 mm bore are configured for secure fitting on many industrial circular saw machines; check machine specifications for exact compatibility. How should cutting parameters be chosen for the best blade life? Select cutting speed and feed that match the grade of the steel and thickness; lower speeds and steady feed reduce heat generation and prolong the life of the blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from consistent cutting performance and extended tool life thanks to the combination of HSS‑Co construction and a vapour‑treated anti‑weld coating, plus the fine finish delivered by the C‑tooth geometry with 120 teeth; order the blade directly via Metav Werkzeuge or consult our specialists for machine‑specific recommendations. TECWERK metal circular saw blade, 315 mm, HSS‑Co, C‑tooth, 120T The metal circular saw blade, 315 mm, HSS‑Co, C‑tooth is designed for precision cutting of stainless and other high‑strength steels in industrial circular sawing machines HSS‑Co for high wear resistance Vapour‑treated anti‑weld coating C‑tooth geometry for clean stainless cuts 315 mm diameter, 40 mm bore with auxiliary holes Durable cutting performance for stainless and high‑strength steels The combination of HSS‑Co material and a vapour‑treated surface provides a balance of hardness and toughness that helps the saw maintain edge integrity under continual use. The vapour treatment acts as an anti‑weld barrier, reducing material build‑up on the cutting edge and helping to preserve cutting geometry. This means fewer interruptions for cleaning or premature regrinding and a more predictable tool lifetime in industrial workshop routines. Clean, low‑burr finish from specialised C‑tooth design The C‑tooth geometry (a bow tooth with rakers) paired with 120 teeth produces a fine kerf and minimal burr formation when cutting stainless and hardened alloys. For users who require high surface quality and minimal secondary finishing, this tooth form reduces post‑cut work and supports a higher first‑pass yield. The tooth count and form also help distribute cutting forces, lowering vibration and improving dimensional stability of the workpiece. Secure mounting and machine compatibility for reliable operation With a 315 mm outside diameter, 2.5 mm blade width and a 40 mm bore, the blade is fitted with auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) to ensure correct mounting and concentricity on common industrial circular saws. The design is compatible with Eisele, Ulmia, Trennjäger, Rekord and Ultra series machines, allowing quick integration into existing workshop setups. The secure fastening afforded by the auxiliary holes contributes to repeatable cuts and consistent angle control across batches. Practical workshop advantages: efficiency, lower rework and predictable supply The material choice and coating support a longer interval between regrinds, which reduces downtime and total handling costs. For production environments processing stainless or other high‑strength steels, the blade’s characteristics translate into fewer rejected parts and a steadier production flow. When combined with Metav’s supply and advisory services, procurement becomes a straightforward route to maintain consistent tooling standards across the workshop. For tailored cutting parameter advice and fast delivery options from Metav Werkzeuge for the TECWERK 315 mm HSS‑Co circular saw blade (SKU 2000814222NW), contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 for machine‑specific guidance. Technical data Article number: 2000814222NW Product: Metal circular saw blade, Form C, TECWERK SKU: 2000814222NW Facts Diameter: 315 mm Blade width: 2.5 mm Teeth: 120 Bore diameter: 40 mm Pitch: 8 Special features Material: HSS‑Co Coating: vapour‑treated (anti‑weld) Tooth form: C (bow tooth with rakers) Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra machines Packaging unit: 1 FAQ Is this blade suitable for cutting stainless steel? The TECWERK metal circular saw blade (SKU 2000814222NW) is specifically designed for stainless (VA) and other high‑strength steels, with a vapour‑treated coating to reduce material welding on the teeth. Which machines will accept this 315 mm blade? This saw blade is compatible with common industrial circular saw machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models, thanks to the 40 mm bore and auxiliary hole pattern. What benefit does the vapour treatment provide? The vapour‑treated surface on the HSS‑Co blade acts as an anti‑weld layer, slowing material adhesion, which helps maintain cutting performance and reduces interruptions for cleaning. How does the C‑tooth form influence finish quality? The C‑tooth geometry with rakers and 120 teeth delivers a finer kerf and reduced burr, improving surface finish and often lowering the need for secondary finishing operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the blade's combination of HSS‑Co construction, vaporised anti‑weld coating and fine 4.5 mm pitch to achieve consistent, burr‑reduced cuts in stainless and high‑strength steels; order directly via Metav Werkzeuge or consult our advisors for machine‑specific recommendations. TECWERK Metal circular saw blade, 315 mm — HSS‑Co, 220 teeth, 40 mm bore The TECWERK Metal circular saw blade 315 mm HSS‑Co is designed for high‑performance cutting of stainless (VA) and other high‑strength steels in industrial circular saw machines HSS‑Co high‑performance cutting material Vaporised coating prevents material buildup 315 mm diameter, 40 mm centre bore 220 fine teeth, BW bow‑tooth geometry Reliable stainless‑steel cutting with minimal build‑up Constructed from HSS‑Co, the blade offers enhanced hardness and heat resistance compared with standard high‑speed steels, which translates into prolonged life and stable cutting performance under demanding conditions. The vaporised coating works as a protective layer to reduce material adhesion and surface welding during sawing, helping to maintain cutting geometry and deliver a cleaner edge on stainless steel and other high‑strength alloys. By combining material choice and coating, the blade reduces tool changes and downtime, supporting continuous production runs with predictable results. Consistent surface finish thanks to fine pitch and BW tooth form With 220 teeth and a 4.5 mm pitch, the geometry is optimised for fine, burr‑reduced finishes on thin to medium section materials. The BW (bow‑tooth) design with alternating bevel produces smooth chip flow and reduces vibration, which benefits surface quality and downstream handling. For operators without extensive metallurgical training, the blade’s pitch and tooth geometry lower the risk of chatter and rework, making it suitable where consistent edge quality is a priority. Coating and treatment engineered to prevent welding and wear The blade is vaporised treated as a deliberate measure against material build‑up that typically occurs when cutting stainless or adhesive alloys. This treatment helps to minimise friction and the formation of welded smear on the teeth, preserving cutting clearance and heat dispersion. In practice, the result is a steadier cutting temperature and fewer interruptions for cleaning or regrinding, which supports higher throughput and lower process costs over time. Machine compatibility and secure mounting for industrial saws The blade features a 40 mm centre bore and multiple auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) for positive mounting on common industrial circular saw frames. It is suitable for Eisele, Ulmia, Trennjäger, Rekord and Ultra circular sawing machines, ensuring secure seating and reliable torque transfer. The 2.5 mm width offers a balance between rigidity and chip clearance for efficient material removal while retaining good dimensional control; this makes the blade a practical choice for production workshops that run a variety of steel grades on standard saw equipment. For production planners seeking reliable stainless‑steel sawing performance, contact Metav Werkzeuge for product availability and machine compatibility guidance — eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data Article number: 2000814220NW Product type: Metal circular saw blade Manufacturer: TECWERK SKU: 2000814220NW Facts Diameter: 315 mm Bore diameter: 40 mm Blade width: 2.5 mm Teeth: 220 Pitch: 4.5 mm Packaging unit: 1 Special features Material: HSS‑Co Coating: vaporised (anti‑weld treatment) Tooth form: BW (bow‑tooth) with alternating bevel Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Designed for stainless (VA) and high‑strength steels Compatibility: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ Which materials is this blade suitable for? The TECWERK metal circular saw blade (HSS‑Co) is intended for stainless steel (VA) and other high‑strength steels, where its material and coating reduce adhesion and preserve cutting performance. How does the vaporised coating affect performance? The vaporised coating acts as a protective layer to limit material build‑up and reduce welding on the teeth, prolonging effective cutting life and helping to maintain consistent surface finish. What does BW tooth form mean in practice? BW indicates a bow‑tooth geometry with alternating bevel, which promotes smoother chip evacuation and lower vibration, resulting in finer edges and reduced burr formation. Is the blade compatible with common industrial saws? Yes — the blade’s 40 mm bore and auxiliary holes match mounting patterns for several industrial machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models. How should the blade be mounted and balanced? Mounting requires correct seating on the 40 mm centre bore and alignment of the auxiliary holes; ensure the saw’s arbour and flange match the blade specifications for safe, vibration‑free operation. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Precision cuts in stainless and other high‑strength steels are delivered by the HSS‑Co construction and the BW tooth form, while the vapourised coating reduces material build‑up; order the blade directly via Metav Werkzeuge or consult our specialists for machine compatibility. Metal circular saw blade BW, Ø 315 mm, HSS‑Co (TECWERK) Metal circular saw blade BW, Ø 315 mm, HSS‑Co designed for precision cutting of stainless and high‑strength steels on industrial circular saws High‑performance HSS‑Co construction Vapourised coating prevents material buildup BW curved tooth for smooth stainless cuts 32 mm bore with multiple auxiliary holes High‑precision cutting for stainless and high‑strength steels The HSS‑Co alloy provides a hard, wear‑resistant cutting edge tailored to demanding materials; with 220 teeth on a 315 mm diameter, the blade achieves fine, burr‑reduced finishes that lower secondary machining. The high tooth count produces smaller chips and a steadier feed, which is particularly beneficial when processing stainless steel and other work‑hardened alloys. This combination of geometry and material reduces rework and supports consistent part quality in series production. Coating and tooth geometry that reduce downtime A vapourised coating is applied to limit material adhesion and protect against weld‑on of workpiece material during cutting. Combined with the BW tooth form — a curved tooth with alternating bevel — the geometry eases chip evacuation and reduces heat transfer into the cutting edge. The result is extended tool life and fewer interruptions for cleaning or blade dressing, contributing to improved production uptime and predictable maintenance cycles. Secure mounting and machine compatibility for reliable operation The blade features a 32 mm bore and a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to ensure positive locating and vibration damping in a broad range of saw spindles. Compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas circular saw machines is established by this mounting pattern, enabling straightforward replacement and minimal setup time. Correct alignment via the auxiliary holes supports concentric running and reduces lateral deflection for cleaner cuts. Practical benefits for workshop efficiency and lifecycle With a 2.5 mm blade body and a 4.5 mm pitch, the design balances stiffness and chip space for smooth feeds at industrial cutting rates. The construction reduces cutting forces, which preserves both the saw drive and clamping fixtures and minimises scrap. For procurement, choosing a blade optimised for the material class — here, stainless and other high‑strength steels — translates into measurable savings through longer lifetimes and fewer tool changes, supporting continuous workflows in small and large shops alike. Contact Metav Werkzeuge for machine‑specific advice or to order the TECWERK metal circular saw blade; our Emmerich team can confirm fitment and delivery options Technical data Article number: 2000814217NW Product: Metal circular saw blade, BW tooth Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 315 mm Bore diameter: 32 mm Blade width: 2.5 mm Teeth: 220 Pitch: 4.5 mm Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Special features Material: HSS‑Co Coating: vapourised (dampfbehandelt) Tooth form: BW (curved tooth with alternating bevel) Application: stainless steel and other high‑strength steels Suitable for: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this blade designed for? The metal circular saw blade BW (TECWERK, SKU 2000814217NW) is optimised for stainless steel and other high‑strength steels; the HSS‑Co composition and tooth geometry support these materials. How does the vapourised coating help in production? The vapourised coating reduces material adhesion and weld‑on during cutting, which extends cutting life and decreases cleaning interruptions when using the TECWERK blade. Which machines will accept this blade mounting? The blade’s 32 mm bore plus auxiliary hole pattern fits numerous industrial saws, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models, ensuring reliable mounting and concentric running. What advantage does the BW tooth form provide? The BW curved tooth with alternating bevel promotes smooth cutting and efficient chip evacuation, resulting in finer surface finishes and reduced burr formation on stainless and high‑strength steels. Is the blade suitable for high‑volume production? Yes; the combination of HSS‑Co, vapourised coating and the 220‑tooth configuration supports extended life and consistent results, making this blade appropriate for regular series production. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund