This vapour-treated HSS circular saw blade with 180 BW teeth and a 32 mm bore combines fine cutting quality and reduced material welding for reliable metalworking results; order directly via Metav Werkzeuge or consult our specialists for compatibility and handling advice. TECWERK metal circular saw blade Form BW Ø225 mm, 2.0 mm, HSS, 32 mm bore, 180 teeth The TECWERK metal circular saw blade is a high-speed steel disc designed for precision cutting of iron and steel on compatible circular saw machines, offering fine-pitch BW tooth geometry for smooth finishes. 225 mm diameter, 2.0 mm kerf 180 BW teeth for fine cutting High-speed steel, vapour-treated 32 mm bore with auxiliary holes Precision cutting performance for demanding metalwork The HSS construction and BW tooth form ensure consistently accurate results when producing thin, burr-minimised cuts in iron and steel. The fine tooth count combined with a narrow 2.0 mm kerf reduces material wastage while maintaining a clean cut edge, which is particularly beneficial for jobs requiring post-process saving and tight tolerances. The design supports steady feed rates and predictable chip formation, helping to keep rework and secondary finishing to a minimum. Reduced welding and improved cut stability through vapour treatment A vapour-treated surface acts as a protective layer to reduce material welding and adhesive build-up on the cutting edge during prolonged use. This treatment helps to maintain cutting geometry and extends service intervals, resulting in less downtime for blade cleaning or replacement. The combination of surface treatment and HSS material supports thermal stability in continuous cutting applications, improving consistency when working on thicker sections of steel. Compatibility and mounting options for common circular saw machines The blade features a 32 mm bore and a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to ensure secure mounting and compatibility with a range of circular saw machines commonly found in workshops. This mounting pattern facilitates stable clamping and vibration control at typical operating speeds for metal circular sawing, contributing to longer tool life and improved surface finish on the workpiece. Practical benefits and material applications Ideal for general metalworking workshops, the blade is suited to cutting iron and steel components where fine surface quality and minimal burrs are required. The 225 mm diameter and 180 teeth configuration favour fine finishing over aggressive stock removal, making the disc appropriate for precision parts, small-batch fabrication and maintenance work. Routine inspection of tooth condition and correct feed/speed settings will maximise the component lifespan and cutting reliability. Order this TECWERK HSS circular saw blade via Metav Werkzeuge for reliable delivery from Emmerich, or contact our technical team at Metav Werkzeuge for application advice and machine compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814241NW Manufacturer: TECWERK Product type: Metal circular saw blade Label: Metallkreissägeblatt Form BW D.225mm B.2,0mm HSS Bohrungs-D.32mm Z.180 TECWERK SKU: 2000814241NW Facts Diameter: 225 mm Teeth: 180 Kerf/width: 2.0 mm Bore diameter: 32 mm Pitch: 4 Special features Material: HSS Coating: vapour-treated Tooth form: BW (bow tooth with alternating bevel) Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas machines Packaging unit: 1 FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is designed primarily for cutting iron and steel and performs best on these materials when used with appropriate feed and speed settings. How does the vapour-treated coating help in use? The vapour-treated surface reduces material adhesion and welding on the cutting edge, which helps to maintain sharpness and improves cut stability for longer production runs. What does the BW tooth form mean for the finish? BW tooth form denotes a bow-shaped tooth with alternating bevels; this geometry gives a finer surface finish and lower burr formation compared with coarser tooth patterns. Will the blade fit my machine's arbor? The blade has a 32 mm bore and multiple auxiliary holes to support common mounting standards; check the machine's flange pattern and consult Metav Werkzeuge if alignment details are required. How should the blade be maintained to extend service life? Regular inspection for tooth wear, correct clamping, appropriate cutting speed, and cleaning to remove built-up swarf will help preserve performance and extend life. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the HSS construction, vapourised anti-weld protection and the fine 120 teeth geometry for reliable, burr‑reduced cuts in ferrous materials; order the blade directly via Metav Werkzeuge or consult the technical team if specification advice is required. TECWERK metal circular saw blade, Form C, 225 mm, HSS, 120 T The TECWERK 225 mm HSS metal circular saw blade, Form C, 120 teeth is a precision cutting tool conceived for high‑quality sawing of iron and steel on industrial circular saw machines 225 mm diameter, 2.0 mm kerf Solid HSS construction for durability Vapourised anti-weld coating 120 teeth, Form C tooth geometry Faster, cleaner cutting for ferrous workpieces The combination of HSS substrate and a dense 120 teeth layout delivers consistently smooth cuts and a fine surface finish when machining iron and steel. High‑speed steel offers elevated hardness at cutting temperatures, which supports longer service intervals and stable cutting behaviour; the compact 2.0 mm kerf reduces material waste while maintaining rigidity. The Form C tooth profile, an arc tooth with complementary rakers, is engineered to control chip formation and to minimise burrs, helping to keep downstream processes predictable and efficient. Built for precise mounting and broad machine compatibility With a 225 mm diameter and a 32 mm bore, the blade fits standard industrial saw spindles and includes multiple side holes for secure seating and improved heat dissipation. The supplied hole pattern (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) ensures stable clamping and balanced rotation, reducing vibration and promoting precision. The geometry and hole layout support use in a range of professional circular sawing systems, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines, enabling straightforward integration into existing production lines. Less downtime through anti‑adhesion treatment and durable build The vapourised coating acts as a protective layer against material adhesion and localised welding on the cutting edge, reducing the need for frequent cleaning and retouching. Combined with the resilience of HSS, this surface treatment enhances durability and keeps cutting parameters stable over longer runs. For operations where consistent throughput and repeatable edge quality matter, this saw blade helps to lower rework rates and supports a more economical production rhythm without sacrificing cut quality. For heavy‑duty ferrous cutting, choose the TECWERK HSS saw blade and contact Metav Werkzeuge for detailed specification support and compatibility advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814242NW Brand: TECWERK Product type: Metal circular saw blade Specifications Diameter: 225 mm Kerf width: 2.0 mm Bore diameter: 32 mm Teeth: 120 Pitch: 6 Special features Material: HSS Coating: Vapourised (anti-weld) Tooth form: Form C (arc tooth with raker) Side holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas machines FAQ Which materials is this blade designed to cut? The TECWERK metal circular saw blade (SKU 2000814242NW) is specified for cutting iron and steel workpieces and is optimised for ferrous materials. What does the vapourised coating do? The vapourised coating provides anti‑adhesion protection that reduces material welding to the cutting edge, lowers heat build‑up and helps maintain a consistent cutting behaviour over extended runs. Will the blade fit standard saw spindles? The blade has a 32 mm bore and multiple mounting holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) to ensure a secure fit; compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines is indicated in the product specification. What is meant by Form C tooth geometry? Form C refers to an arc‑shaped tooth with front and trailing rakers, designed to produce fine chips and a smoother finish when machining ferrous materials. How does the high tooth count affect the cut? A 120‑tooth configuration yields a finer cut with reduced burrs and improved surface quality, making it suitable for applications where finish and dimensional control are priorities. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of dry-cutting technology and resin-filled laser slots for a quieter cut, together with a 2.0 mm kerf and 48-tooth geometry that balance cutting speed and finish — order the blade directly via Metav Werkzeuge or consult the team for workshop-specific recommendations. Jepson 230 mm Circular Saw Blade — 48 Teeth, 2.0 mm Kerf The Jepson 230 mm circular saw blade, engineered for cutting steel and stainless steel, offers lubricant-free dry cutting and is suitable for hand-held circular saws, mitre saws and stationary machines Dry-cutting technology for lubricant-free use Designed for steel and stainless material cutting Compatible with hand, mitre and stationary saws Resin-filled laser slots for reduced noise High-performance dry cutting that keeps production moving The blade’s dry-cutting technology enables efficient metal removal without coolant, reducing process complexity in busy workshops. With a 48-tooth geometry and a 2.0 mm kerf, this design achieves a compromise between feed rate and surface finish: faster cycle times than high-gullet alternatives while maintaining acceptable edge quality. The combination of tooth count and kerf minimises heat build-up during cuts, which helps preserve blade geometry and extends the interval between resharpenings. For applications in steel and stainless steel, this configuration supports consistent throughput and predictable tool life. Quieter, smoother operation for safer workplaces Noise and vibration control is achieved through resin-filled laser slots, which dampen oscillations that otherwise amplify sound and stress on the blade body. Reduced vibration leads to a steadier cut, improving operator comfort and decreasing the risk of chatter marks on the workpiece. The blade’s construction also contributes to thermal stability during prolonged use, limiting distortion and preserving concentricity. These properties are particularly valuable in small production cells and maintenance workshops where machine noise and component tolerances are important factors. Versatile compatibility and cost-effective longevity Made to suit hand circular saws, mitre saws and stationary machines, the blade adapts to a range of workshop set-ups without the need for special fixtures. The 25.4 mm bore matches common arbor standards, simplifying installation across most saws. Additionally, the blade is resharpenable up to five times, which reduces total cost of ownership and supports sustainability goals by extending service life. Suitable for routine fabrication and repair tasks on steel and stainless steel, this blade provides a balance of performance and economy for general metalworking. Contact Metav Werkzeuge for tailored advice on blade selection, machine compatibility and supply options for Jepson circular saw blades — Metav’s consultants are available to help specify the optimal configuration for every workshop. Technical data Article number: 4681346011NW Product designation: Jepson 230 mm circular saw blade, 48 teeth, 2.0 mm kerf, 25.4 mm bore Manufacturer: Jepson Power GmbH Packing unit: 1 Core specifications Diameter: 230 mm Teeth: 48 Kerf/width: 2.0 mm Bore: 25.4 mm Special features Dry-cutting technology for lubricant-free operation Suitable for steel and stainless steel Use on hand circular saws, mitre saws, stationary machines Resin-filled laser slots for reduced noise and vibration Resharpenable up to 5 times FAQ What materials is this blade suitable for? The Jepson 230 mm circular saw blade is designed for cutting steel and stainless steel, as noted in the product’s specification and special features. Can the blade be used without coolant? Yes — the blade features dry-cutting technology, making it suitable for lubricant-free use in typical workshop applications. How many times can the blade be resharpened? The blade is resharpenable up to five times, which helps reduce lifecycle costs and maintain cut quality over multiple services. Which machines are compatible with this blade? Compatibility includes hand-held circular saws, mitre saws and stationary machines that accept a 25.4 mm bore diameter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine durable HSS cutting edges with a vapour-treated anti-weld coating and a precise 2.0 mm kerf to achieve consistent, burr-minimised cuts in iron and steel. Order the metal circular saw blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK metal circular saw blade Ø250 mm, BW tooth form, HSS The TECWERK metal circular saw blade Ø250 mm is a high-precision cutting tool for iron and steel, engineered for use on standard circular sawing machines where fine finishes and repeatable results are required. HSS construction for extended tool life Vapour-treated coating reduces material welding 2.0 mm cutting width for accurate kerf control 32 mm bore with multiple side holes for secure mounting Consistent metal cutting with high-edge stability The blade’s HSS construction and dense 200 teeth deliver a fine cut quality that reduces secondary finishing. High-speed steel retains hardness at elevated temperatures, which means fewer edge deformations during prolonged cutting cycles. The BW tooth form—an arc-shaped tooth with alternate chamfering—creates a balanced cut pattern that lowers vibration and helps produce straight, low-burr cuts in many ferrous materials. This combination of features supports stable throughput and reduces rework in batch and single-piece production. Anti-weld treatment and its practical benefit A vapour-treated surface provides a thin protective layer that lowers adhesion of cut material and improves heat management at the cutting edge. In practice, this means reduced build-up on teeth when sawing alloys or sticky steels, a longer interval between cleaning and dressing, and fewer interruptions for blade maintenance. The blade’s narrow 2.0 mm kerf conserves material while maintaining rigidity, so cutting remains both economical and precise in serial production or workshop applications. Machine fit and installation that minimises downtime With a 250 mm diameter and a 32 mm bore, the blade offers straightforward installation on many circular sawing platforms. Multiple side holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) facilitate secure mounting and compatibility with adapters used by established machine manufacturers. The specified pitch 4 supports the fine tooth density required for steel and iron work. These attributes reduce changeover time and simplify stocking decisions for service departments and purchasing teams by offering broad machine compatibility. Workshop advantages and material range Designed primarily for ferrous machining, the blade is optimised for iron and steel applications where surface finish and dimensional accuracy matter. The robust HSS body tolerates typical metal sawing conditions while the ant-weld surface treatment helps when cutting adhesive or alloying materials. For operations aiming to standardise tooling and reduce inventory complexity, this circular saw blade provides a reliable option that combines finish quality with operational resilience. For application advice or to secure the TECWERK 250 mm metal circular saw blade, contact Metav Werkzeuge for tailored guidance and swift processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical specifications Article number: 2000814243NW Product: Metal circular saw blade, BW form Brand: TECWERK Core dimensions Diameter: 250 mm Cutting width: 2.0 mm Tooth count: 200 Bore diameter: 32 mm Pitch: 4 Materials & features Material: HSS Coating: vapour-treated Tooth form: BW (arc tooth with alternate chamfer) Side holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatible with: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular sawing machines FAQ Which materials is this blade intended for? The TECWERK metal circular saw blade is designed primarily for iron and steel applications; HSS and the vapour-treated surface help manage heat and reduce welding during metal cutting. What does BW tooth form mean and why is it useful? BW indicates an arc-shaped tooth with alternate chamfering, which produces a balanced cut pattern, lower vibration and a finer surface finish when sawing ferrous materials. How is the blade mounted on a sawing machine? The blade uses a 32 mm central bore and multiple side holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) to allow secure fitting and use of common adapters for standard circular sawing machines. Is the blade suitable for fine finishing work? Yes; the combination of 200 teeth, narrow kerf and HSS construction supports precise cuts with reduced burr formation, making it suitable for applications where finish quality is important. Which machine brands is the blade compatible with? The design and hole pattern make the blade compatible with several established manufacturers, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the blade’s HSS‑Co construction, vapourised anti‑weld coating and fine 128‑tooth Form C geometry to cut stainless and high‑strength steels with reduced burr and lower downtime; order the METAL CIRCULAR SAW BLADE directly via Metav Werkzeuge or ask our consultants if needed. TECWERK 250 mm HSS‑Co Metal Circular Saw Blade, Form C, 128 Teeth The TECWERK 250 mm metal circular saw blade is designed for precision cutting of stainless and other high‑strength steels on professional band and circular saw machines HSS‑Co high‑speed cobalt construction Vapourised anti‑weld coating 250 mm diameter, 2.0 mm kerf 128 teeth, Form C tooth geometry 32 mm bore with auxiliary holes High‑performance cutting for stainless and high‑strength steels The blade’s HSS‑Co alloy combines high‑speed steel with cobalt for improved red hardness and edge life under heat, enabling consistently fast cutting of stainless steel and other high‑strength steels. The hardened alloy reduces wear during demanding runs, which translates into longer intervals between re‑grinds and more productive machine hours. The 250 mm diameter and slim 2.0 mm kerf provide a favourable balance between material removal rate and heat generation, helping to maintain cut quality in continuous production settings. Precision tooth geometry for smoother, low‑burr finishes Equipped with 128 teeth in a Form C arrangement (arched tooth with raker cutters), the blade delivers fine, repeatable cuts with reduced burr formation. This tooth configuration is suitable for industrial fabrication where surface quality matters; the alternating raker cutters support chip formation, while the main teeth preserve the cut line. For users unfamiliar with tooth forms, Form C essentially combines a main cutting edge with small pre‑ and post‑cutters to produce cleaner edges and lower secondary finishing effort. Coating and hole pattern minimise material build‑up and vibration The vapourised coating acts as a protective barrier to inhibit material from welding onto the teeth during stainless cutting, reducing gumming and the need for frequent cleaning. The blade also features a 32 mm centre bore and a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) that improve mounting stability and vibration damping on compatible saws. Together, coating and hole pattern help preserve tooth geometry and maintain cutting precision over extended shifts. Built for compatibility and industrial workflows This circular saw blade is adapted for use in a range of professional machines, including models by Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, ensuring easy replacement within established production lines. The blade’s construction and geometry favour frequent, high‑quality throughput, supporting lean workflows in metalworking shops and cutting centres. When paired with steady feeds and adequate cooling, the result is consistent cycle times and less rework. Contact Metav Werkzeuge for application advice and to secure a 250 mm HSS‑Co blade with vapourised anti‑weld coating; Metav Werkzeuge supplies industry‑grade tools from Emmerich and can advise on compatibility and delivery — info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: 2000814231NW Manufacturer: TECWERK Product: Metal circular saw blade Diameter: 250 mm Kerf width: 2.0 mm Teeth: 128 Tooth form: C Bore diameter: 32 mm Packaging unit: 1 Facts Diameter: 250 mm Kerf width: 2.0 mm Teeth count: 128 Pitch: 6 Bore: 32 mm Special features Material: HSS‑Co Coating: vapourised (anti‑weld protection) Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Suitable for: stainless steel and high‑strength steels Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas FAQ What materials is this circular saw blade suitable for? The TECWERK 250 mm metal circular saw blade (SKU 2000814231NW) is suitable for stainless steel and other high‑strength steels, thanks to its HSS‑Co alloy and anti‑weld coating. How does the vapourised coating help in everyday use? The vapourised coating reduces material build‑up and welding on the teeth during stainless cutting, which helps maintain cutting quality and extends the blade’s effective working life. What does Form C tooth geometry mean for cut quality? Form C denotes an arched tooth with pre‑ and post‑cutters; this arrangement provides smoother edges and lower burrs, meaning less secondary finishing for typical metal fabrication tasks. Which machines will accept this blade? The blade is compatible with common industrial saw frames such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, due to its 32 mm bore and auxiliary hole pattern for secure mounting. How many teeth does the blade have and why does that matter? With 128 teeth, the blade delivers fine cutting action that favours surface finish and reduced burrs, making it suitable for precision work on thin to medium section materials. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from precise, reliable metal cutting with the 250 mm HSS circular saw blade featuring 128 teeth and a steam-treated surface to reduce material adhesion; order directly via Metav Werkzeuge or contact our consultants for bespoke advice. TECWERK metal circular saw blade – 250 mm HSS, 128 teeth The TECWERK metal circular saw blade (form C) is engineered for accurate cutting of iron and steel on industrial circular and band sawing machines, combining a narrow kerf with a tooth geometry optimised for smooth edge quality. HSS construction, steam-treated coating 250 mm diameter, 2.5 mm blade width 128 teeth, tooth form C for smooth cuts 32 mm bore with multiple auxiliary holes Precision performance for demanding metalworking tasks The 250 mm HSS construction delivers consistent cutting performance across repeated cycles, while the 128 teeth arrangement reduces vibration and leaves a finer surface finish than coarser blades. Designed for situations where dimensional accuracy and surface quality matter, this saw blade minimises secondary machining. The narrow 2.5 mm kerf reduces material loss and heat generation, supporting higher feed rates without sacrificing edge quality. By selecting a blade with these characteristics, production planners and workshop managers can expect predictable cut behaviour and improved yield from steel and iron stock. Coating and tooth geometry that prevent build-up and improve life A steam-treated surface forms a thin protective layer that impedes weld-on and material adhesion during cutting, meaning fewer interruptions to clear the blade and a longer effective service life. The tooth form C (bow tooth with primary and secondary cutting edges) balances chip formation and clearance, which lowers cutting forces and helps maintain sharpness under continuous load. For teams that process abrasive or sticky alloys, these design choices translate into reduced downtime and more consistent output quality — technical advantages that pay off across whole production runs. Secure fitting and broad machine compatibility The blade features a 32 mm central bore and a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to match the mounting patterns of common metal sawing systems. This arrangement ensures a stable fit on compatible machines and helps distribute torque evenly to reduce wobble and run-out. Compatibility with well-known sawing brands is built into the design, making the blade a practical option for maintenance stocks where quick replacement and minimal setup are priorities. Fitting the blade requires standard workshop tools and follows the usual safety checks for circular saw assemblies. Operational economy, maintenance and suitability The combination of HSS material, fine-tooth geometry and anti-adhesion treatment creates a tool that balances cutting speed with longevity, offering a cost-effective option for frequent steel and iron cutting tasks. Routine maintenance is straightforward: visual inspection, cleaning of the tooth gullets and verification of the bore and mounting holes will sustain performance. For workshops seeking to reduce rework and preserve machine uptime, this blade provides predictable wear behaviour and stable cut results over many cycles, supporting leaner operation and fewer interruptions to production. Contact Metav Werkzeuge for expert guidance on selecting the right TECWERK 250 mm HSS circular saw blade for specific applications and to ensure optimal machine compatibility Technical data SKU: 2000814193NW Product: Metal circular saw blade, form C Manufacturer: TECWERK Material: HSS Coating: vaporised Diameter: 250 mm Blade width: 2.5 mm Teeth: 128 Tooth form: C Bore diameter: 32 mm Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Packaging unit: 1 Key measurements Diameter: 250 mm Blade width: 2.5 mm Teeth: 128 Bore Ø: 32 mm Pitch: 6 Compatibility & special features For iron and steel materials Steam-treated coating to reduce material adhesion Tooth form C: bow tooth with primary and secondary cutting edges Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas machines Multiple auxiliary mounting holes for secure fit FAQ What materials is this saw blade suitable for? The TECWERK metal circular saw blade is specified for use with iron and steel materials and performs best where a narrow kerf and fine finish are required. How does the steam-treated coating help in daily use? The steam-treated surface on the blade reduces weld-on and material build-up during cutting, which helps maintain cutting efficiency and extends the blade's service life. Which machines will accept this blade? The blade's 32 mm bore and the pattern of auxiliary holes make it compatible with many circular sawing systems, including models from Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas. Is the tooth geometry suitable for fine finish work? Yes, the tooth form C with 128 teeth is designed to deliver smoother edges and lower vibration, making it suitable for applications demanding a fine surface finish. What should be checked during installation? Inspect the bore and auxiliary holes for damage, ensure correct seating on the machine flange, and confirm that the mounting pattern matches the saw; regular cleaning of gullets preserves cutting performance. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from the combination of HSS construction, a vapour-treated anti-weld finish and a fine 128‑tooth geometry for consistent, burr‑reduced cuts in ferrous materials; order the TECWERK circular saw blade directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. TECWERK Metal circular saw blade, 250 mm – HSS, 128 teeth, 40 mm bore A TECWERK metal circular saw blade engineered for fine, reliable cutting of iron and steel on workshop and industrial circular saws. 250 mm diameter for metal cutting 128 teeth for fine, smooth cuts 2.5 mm kerf for precise material removal Vapour‑treated HSS to reduce material welding 40 mm bore with multiple auxiliary holes Consistent, high‑quality cuts for ferrous materials The blade is built from HSS to deliver toughness and stable edge life under repetitive use, with a high tooth count that prioritises finish over aggressive stock removal. The 128 teeth and C‑shaped arc tooth geometry provide sequential primary and secondary cutting actions that reduce burr formation and minimise secondary operations. This geometry permits a cleaner finish on iron and steel, lowering the need for downstream grinding and saving cycle time in production environments. Vapour‑treated coating for fewer stoppages A vapour‑treated surface acts as a protective barrier against material adhesion and build‑up on the cutting edge, significantly reducing the risk of weld deposits that blunt teeth and interrupt runs. The treatment supports longer uninterrupted cutting sequences and improves tip life when working with sticky or heat‑sensitive ferrous alloys. In practical terms, this means fewer blade changes and more predictable maintenance intervals for the workshop. Secure mounting and broad machine compatibility The blade’s 250 mm overall diameter and 40 mm bore with additional holes (2 x 8/55 mm and 4 x 12/64 mm) enable secure mounting and indexing on a range of industrial saw frames. It is designed for direct fitment to common saw models such as Eisele, Ulmia, Trennjäger, Rekord and Ultra series machines, ensuring straightforward replacement and consistent alignment. The auxiliary hole pattern supports dampening of vibration and accurate centring during high‑precision cross‑cuts. Workshop efficiency and handling advantages A narrow 2.5 mm kerf balances material economy with cutting stability, reducing scrap while keeping feed forces manageable for standard circular saw drives. The combination of fine tooth count and C‑tooth form delivers a smooth surface quality that reduces the need for manual finishing. For purchasing and supply, Metav’s stock in Emmerich acts as a quality filter and logistics hub, offering reliable availability and a broad product range to consolidate sourcing for the workshop. Discuss the TECWERK metal circular saw blade with Metav Werkzeuge to confirm machine compatibility and secure prompt supply from our Emmerich hub Technical data Article number: 2000814160NW Label: Metallkreissägeblatt Form C D.250mm B.2,5mm HSS Bohrungs‑D.40mm Z.128 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Packaging unit: 1 Facts Diameter: 250 mm Kerf/width: 2.5 mm Teeth: 128 Bore diameter: 40 mm Pitch: 6 Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Special features Material: HSS Coating: vapour‑treated Tooth form C: arc tooth with primary and secondary cutting edges Anti‑weld protection for iron and steel Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra machines FAQ Is the blade suitable for cutting stainless steel? The blade is specified for iron and steel; stainless steel suitability depends on grade and cutting parameters and should be validated before series use with the TECWERK metal circular saw blade (SKU 2000814160NW). Which machines can accept this saw blade? The blade fits saws with a 40 mm bore and corresponding auxiliary hole patterns and is listed as compatible with Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines. How does the vapour‑treated finish affect performance? The vapour‑treated coating reduces material adhesion and welding on the tooth tips, extending cutting intervals and maintaining a cleaner kerf during long production runs. What kind of surface finish can be expected? Thanks to the 128 teeth and C‑tooth geometry, the blade produces a fine, low‑burr finish on ferrous workpieces, reducing the need for secondary finishing operations. Is HSS suitable for repetitive workshop use? HSS offers a balance of toughness and edge retention suitable for frequent cutting of iron and steel; actual life will depend on feed rates, cooling and material condition when using the TECWERK blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS construction and a vapour-treated coating to reduce material build-up and extend blade life, while the 250 mm diameter and 160 fine BW teeth deliver precise, burr-minimised cuts in ferrous materials; order directly via Metav Werkzeuge or consult the Metav team for technical guidance. TECWERK Metal Circular Saw Blade BW – 250 mm, HSS, 160 T The TECWERK Metal Circular Saw Blade BW is a purpose-designed metal-cutting blade for industrial and workshop circular saws, engineered for fine, consistent cuts in iron and steel. HSS body for high wear resistance Vapour-treated coating prevents material weld-up 250 mm diameter with 2.5 mm kerf 160 BW teeth for fine, burr-reduced cutting Precise, efficient cutting for metalworking productivity The blade combines a high-speed steel (HSS) construction with a fine tooth count to deliver consistent cutting results and a long service life. The 160 teeth and BW tooth form create numerous small cutting edges that reduce burr formation and improve surface finish, which translates into less secondary processing and lower throughput times. For operations where repeatable accuracy and minimal rework are priorities, this blade reduces cycle variability and helps maintain predictable production flows. Reduced material adhesion and longer service intervals A key technical benefit is the vapour-treated coating, applied to mitigate material adhesion and welding of chips to the cutting edge during high-temperature cuts. This surface treatment decreases the tendency for built-up edge and reduces emergency dressing or premature replacement. The HSS substrate, combined with the coating, supports sustained cutting performance when processing iron and steel, resulting in fewer interruptions and improved overall tool economy for medium- to heavy-duty workshop use. Workshop compatibility and mechanical details for easy integration The blade is sized at 250 mm overall diameter with a blade width of 2.5 mm and a central bore of 40 mm, including secondary mounting holes (2 x 8/55 mm and 4 x 12/64 mm), ensuring secure attachment to a wide range of dedicated metal circular saw machines. It is suitable for established machine brands such as Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saws, enabling straightforward replacement and rapid commissioning. The construction supports stable cutting trajectories and reduces vibration, which benefits both cut quality and operator confidence. For reliable procurement and expert advice on the TECWERK 250 mm HSS vapour-treated circular saw blade, contact Metav Werkzeuge for tailored technical recommendations and fast supply from their Emmerich facility via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814162NW Label: Metallkreissägeblatt Form BW D.250mm B.2,5mm HSS Bohrungs-D.40mm Z.160 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Material: HSS Coating: vapour-treated Facts Diameter: 250 mm Width / kerf: 2.5 mm Teeth: 160 Bore diameter: 40 mm Division: 5 Packaging unit: 1 Special features BW tooth form — arched tooth with alternate bevel Vapour-treated surface to protect against material weld-up Suitable for iron and steel materials Secondary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatible with Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines FAQ What materials is this saw blade suitable for? The TECWERK metal circular saw blade is designed primarily for iron and steel; its HSS construction and vapour-treated surface reduce adhesion when cutting ferrous materials. Which machines fit the 40 mm bore and side-hole pattern? The blade fits machines from manufacturers such as Eisele, Ulmia, Trennjäger, Rekord and Ultra thanks to the 40 mm central bore and the specified secondary hole pattern. How does the vapour-treated coating benefit workshop users? The vapour-treated coating on the TECWERK HSS blade lowers the risk of material weld-up, leading to cleaner cuts and longer intervals between blade maintenance and replacements. Is this blade suitable for fine finishing work? Yes; the 160 teeth and BW tooth form produce fine, burr-minimised cuts that reduce the need for subsequent finishing operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

The combination of HSS construction, a vapour-treated coating and a stable BW tooth geometry delivers consistent cuts in iron and steel while reducing material build-up and downtime; order the TECWERK metal circular saw blade directly via Metav Werkzeuge or ask the consultants if technical clarification is needed TECWERK metal circular saw blade 250 mm — HSS, BW tooth, vapour-treated The TECWERK metal circular saw blade 250 mm is a high-speed steel saw blade designed for clean, efficient cutting of iron and steel on compatible cold saws and circular sawing machines HSS construction for high wear resistance Vapour-treated coating prevents material build-up BW bow-tooth geometry with alternate chamfer 40 mm bore with auxiliary mounting holes Reliable cutting performance for iron and steel Built from HSS, this circular saw blade provides stable cutting behaviour and consistent edge quality when working with ferrous materials. The BW (bow) tooth geometry with alternating chamfer reduces cutting forces and helps achieve smooth kerf edges, which in turn lowers the need for secondary finishing. For metalworking shops that prioritise throughput and repeatable results, the blade’s design contributes to predictable performance across batch cuts, ensuring fewer rejects and less rework. Coating that keeps productivity high The blade is vapour-treated, a surface treatment intended to protect against material adhesion during cutting. This protection minimises the risk of chip welding on the teeth and reduces friction-related heat build-up, leading to longer uninterrupted running periods and less manual cleaning. For busy production lines, the coating translates into lower maintenance intervals and improved net operating time without changing cutting parameters. Simple mounting and broad machine compatibility A 40 mm bore plus multiple auxiliary holes (2 × 8/55 mm and 4 × 12/64 mm) ensure a secure fit on a wide range of circular saw machines. The blade is compatible with established cold saw brands, helping to reduce changeover complexity and alignment time. The standard pitch 4 and the 2.0 mm width support stable feed rates and help maintain concentricity during longer cuts, which is important for precision applications in fabrication and contract workshops. Practical benefits for workshop workflows Specified with a high tooth count and a narrow kerf, the blade is suited to frequent cross-cutting and sectioning of steel profiles where material savings and edge quality matter. The combination of durability, the anti-adhesive coating and the BW tooth form results in cleaner cuts and an extended service interval. If detailed application parameters are required for specific alloys or specialised machines, technical advisers can provide tailored recommendations to match the saw’s setup. For tailored advice, availability checks or a fast supply from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 and request the TECWERK HSS metal circular saw blade (SKU 2000814159NW) Technical data Article number: 2000814159NW Product: TECWERK metal circular saw blade 250 mm Manufacturer: TECWERK Facts Diameter: 250 mm Width: 2.0 mm Tooth count: 200 Bore diameter: 40 mm Pitch: 4 Special features Material: HSS Coating: vapour-treated Tooth form: BW (bow tooth) with alternate chamfer Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Suitable for: iron and steel Compatible with: Eisele, Ulmia, Trennjäger, Rekord, Ultra saws Packaging unit: 1 FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is specified for iron and steel, and its HSS construction provides the hardness and toughness required for those materials. How does the vapour-treated coating help in daily use? The vapour-treated coating on the blade reduces material build-up and prevents chip welding to the teeth, which helps to maintain cutting performance and lengthens maintenance intervals. Which machines can the blade be mounted on? The blade’s 40 mm bore and auxiliary holes make it compatible with many cold saws; it is explicitly suited for machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models. Is this blade suitable for precision cutting in a production environment? Yes, the BW tooth geometry combined with HSS construction delivers consistent, precise cuts suitable for production workflows where repeatable edge quality is required. What is the SKU for ordering and reference? The blade is listed under SKU 2000814159NW and marketed as the TECWERK metal circular saw blade 250 mm TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from robust HSS construction, a vapour-treated anti-weld coating and precise BW tooth geometry for consistent separation cuts; order the blade directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK metal circular saw blade BW form, 250 mm, 2.5 mm, HSS, bore Ø 40 mm (SKU 2000814166NW) A TECWERK metal circular saw blade BW form engineered for efficient separation cutting of iron and steel on compatible separation and panel saw machines. HSS construction with vapour-treated coating BW arc tooth with alternate chamfer 250 mm diameter with 2.5 mm kerf Bore Ø 40 mm with multiple auxiliary holes Reliable cutting performance for steelwork The HSS body delivers a durable cutting core that resists deformation under the heat and stresses of high-speed separation. Combined with the vapour-treated surface, the blade reduces the risk of material adhesion during long runs, which keeps the kerf clean and minimises rework. The BW tooth shape (arc tooth with alternate chamfer) is designed to balance chip evacuation and edge life, so the blade sustains steady feed rates and consistent finish on ferrous materials. This technical combination emphasises production stability and lower process interruptions. Designed for quick mounting and machine compatibility With a central bore Ø 40 mm and a pattern of auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm), the blade fits a range of separation saws commonly used in workshops and fabrication shops. The standardised mounting layout ensures a secure fit on Eisele, Ulmia, Trennjäger, Rekord and Ultra saw models, reducing machine downtime during tool changes. The 250 mm diameter and 2.5 mm kerf are optimised for thin, accurate cuts while maintaining adequate rigidity, helping to preserve component tolerances and minimise material waste. Operational advantages and maintenance considerations A high tooth count (200 teeth) together with a 4 mm pitch provides a fine cutting action suitable for thin-section steel and iron components where surface quality matters. The vapour-treatment functions as an anti-weld barrier, slowing the formation of built-up edge and extending service intervals; in practice this means fewer dressing cycles and less unplanned stoppage. Regular inspection of the tooth tips and ensuring correct feed and speed settings will maximise service life, while careful storage and handling protect the HSS substrate from impact damage. Selecting the right blade for consistent workshop results Choosing this circular blade supports reproducible separation results across batches and operators because of its precise geometric design and material choices. The combination of 250 mm diameter, 2.5 mm kerf and BW tooth geometry makes the product suitable for users aiming for accurate cuts with reduced burr formation. For workshops consolidating suppliers, this blade represents a reliable option that complements a lean tool set-up and supports predictable throughput in everyday production. For tailored advice on machine compatibility or to request a technical sheet for this TECWERK 250 mm HSS BW-form metal circular saw blade (SKU 2000814166NW), contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for a precise supply recommendation Technical data Article number: 2000814166NW Designation: TECWERK metal circular saw blade BW form, 250 mm, 2.5 mm Manufacturer: TECWERK Product type: metal circular saw blade Packaging unit: 1 Facts Diameter: 250 mm Width / kerf: 2.5 mm Bore diameter: 40 mm Teeth: 200 Pitch: 4 mm Special features Material: HSS Coating: vapour-treated (anti-weld surface) Tooth form: BW – arc tooth with alternate chamfer Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra separation saws FAQ What materials can this blade cut effectively? The TECWERK metal circular saw blade in BW form is intended primarily for iron and steel workpieces; its HSS construction and vapour-treated surface help when cutting typical ferrous materials. How does the vapour-treated coating benefit production? The vapour-treated finish on this TECWERK blade reduces material adhesion and built-up edge during prolonged cutting, which improves surface finish and extends intervals between maintenance. Is the blade suitable for all separation saws? Mounting is simplified by the bore Ø 40 mm and the listed auxiliary holes; the blade is compatible with many Eisele, Ulmia, Trennjäger, Rekord and Ultra models, subject to machine-specific mounting adapters. What cutting quality can be expected from a 200-tooth configuration? A high tooth count yields a finer cut and reduced burr formation, making the blade suitable for thin-section steel where a good surface finish and tight tolerances are required. How should the blade be maintained to maximise life? Maintain correct speeds and feed for the material, inspect tooth tips regularly and store the blade to avoid nicks; the HSS core and vapour-treated surface will then deliver consistent service life. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of cost-effective durability, fine-tooth cutting quality and reduced weld-up thanks to vapour treatment for a reliable metal-cutting workflow; order the blade directly via Metav Werkzeuge or contact our consultants for technical clarification. TECWERK Metal Circular Saw Blade — HSS, 250 mm, 160 Teeth A TECWERK metal circular saw blade designed for precision cutting of iron and steel on common circular sawing machines High-speed steel (HSS) construction Vapour-treated anti-weld coating 160 teeth, BW bow-tooth with alternate chamfer 32 mm bore with multiple auxiliary holes Precision and longevity for ferrous materials Built from HSS and treated in a vapour process, this circular blade prioritises long tool life and consistent cutting performance. The 250 mm diameter combined with a slim 2.5 mm kerf reduces material waste while maintaining rigidity for repeatable cuts. The vapour treatment forms a protective layer that helps to prevent material from adhering to the teeth during high-temperature cutting; this reduces downtime for cleaning and maintains cutting geometry for longer, which translates into fewer interruptions in production. Fine finish and efficient chip control With 160 teeth and a BW tooth geometry (bow tooth with alternate chamfer), the blade produces a fine surface finish and minimises burr formation on ferrous workpieces. The high tooth count lowers the chip load per tooth, enabling more even cutting forces and a smoother edge, which reduces the need for secondary finishing. For workshops aiming to maximise throughput with minimal rework, the combination of tooth form and narrow kerf offers a clear productivity advantage. Mounting, heat management and machine compatibility The blade features a 32 mm bore and several auxiliary holes for secure mounting and improved heat dissipation. The arrangement of the side holes supports air flow and helps to stabilise the blade temperature during prolonged cutting cycles, which contributes to dimensional stability of the cut. Designed for use on a range of professional saws, the blade is compatible with machines from Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, ensuring straightforward replacement and integration on many established workshop platforms. Choose the TECWERK HSS 250 mm blade for dependable, fine-tooth cutting on iron and steel — contact Metav Werkzeuge for tailored advice or to arrange supply directly from Emmerich. Technical data Article number: 2000814194NW Product: Metal circular saw blade Manufacturer: TECWERK Material: HSS Coating: vapour-treated Diameter: 250 mm Width: 2.5 mm Teeth: 160 Bore diameter: 32 mm Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Pitch: 5 Tooth form: BW Packaging unit: 1 Core specifications Diameter: 250 mm Cutting width: 2.5 mm Number of teeth: 160 Bore diameter: 32 mm Pitch: 5 Packaging unit: 1 Features & compatibility Vapour-treated to protect against material weld-up BW tooth form — bow tooth with alternate chamfer Suitable for iron and steel materials Mounting holes for improved heat dissipation Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is the blade suitable for? The TECWERK metal circular saw blade is specified for cutting iron and steel workpieces and is engineered to perform on typical ferrous materials. How does the vapour treatment help in practice? Vapour treatment on the TECWERK blade reduces material adhesion to the teeth during cutting, which lowers the risk of weld-up and keeps cutting geometry intact for longer periods. What does BW tooth form mean and why is it useful? BW denotes a bow tooth profile with alternate chamfer; this geometry provides a fine finish and improved chip evacuation on ferrous metals when used with the 160-tooth configuration. Will the blade fit my saw machine? With a 32 mm bore and multiple auxiliary holes the blade is designed for secure mounting and is compatible with many professional circular saw models, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines. How does the high tooth count affect cutting performance? The 160-tooth setup on this blade reduces chip load per tooth, delivering a smoother cut and less burr formation, which limits the need for additional finishing. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of durable HSS construction and a vapour-treated anti-weld finish to keep cutters running clean and consistent; the combination of a fine 200‑tooth profile and a narrow 2.5 mm kerf ensures precise, low-waste cuts for ferrous materials — order or request advice via Metav Werkzeuge for tailored supply and delivery. TECWERK Metal Circular Saw Blade BW Form, 250 mm, HSS, 200 Teeth A TECWERK metal circular saw blade in BW form, designed for precise cutting of iron and steel in industrial circular saw machines *250 mm diameter for standard saw arbors *200 teeth for fine, precise cuts *Vapour-treated anti-weld coating reduces material build-up *32 mm bore with multiple auxiliary holes for stability Clean, high-precision cuts for demanding metalwork The HSS construction combined with a 200‑tooth layout and BW tooth form (bow tooth with alternate bevel) provides a cutting geometry that prioritises surface finish and dimensional control. The fine tooth count lowers chip size and distributes cutting forces across more edges, resulting in reduced burr formation on ferrous workpieces. For workshops producing small sections or components from iron and steel, this geometry delivers repeatable, accurate results with fewer secondary operations and less manual rework, improving throughput and part quality. Reduced adhesion and longer effective tool life A vapour‑treated surface acts as an anti‑weld barrier that inhibits material build-up on the tooth flanks during prolonged cutting of steel grades. This treatment reduces friction and heat accumulation at the cutting edge, which in turn helps maintain the original cutting geometry for longer intervals between dressing or replacement. The use of HSS material ensures toughness under impact and thermal stress, offering a balance between wear resistance and resilience for continuous industrial applications. Secure mounting and vibration‑controlled performance The blade features a 32 mm bore and a pattern of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) that enhance seat stability and aid cooling by improving air circulation. This mounting arrangement minimises run‑out and vibration when used with compatible machines such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas circular saw systems, making the blade suitable for integration into existing production lines. Stable seating and reduced oscillation support consistent cutting depth and edge quality across long production runs. Narrow kerf and robust construction for efficient production With a kerf width of 2.5 mm, the blade removes less material per cut compared with wider alternatives, which reduces scrap and requires less power per cut — a tangible efficiency advantage in batch processing. The combination of narrow width and a high tooth count supports fine sectional cuts and keeps heat generation manageable, preserving workpiece metallurgy. Where throughput and material economy are priorities, this blade offers a pragmatic balance of precision and durability. Order through Metav Werkzeuge for reliable delivery from Emmerich and expert advice on integration into existing saw systems; contact Metav Werkzeuge for further technical details and stocking information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000814196NW Product: Metal circular saw blade Manufacturer: TECWERK Material: HSS Coating: Vapour-treated Tooth form: BW Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Facts Diameter: 250 mm Bore diameter: 32 mm Blade width (kerf): 2.5 mm Teeth: 200 Pitch: 4 Special features Vapour-treated finish as protection against material adhesion Bow tooth with alternate bevel to improve surface finish Suitable for iron and steel workpieces Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines Packed unit: 1 FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is designed primarily for iron and steel work, with an HSS body and vapour treatment to resist adhesion when cutting ferrous materials. How does the vapour-treated coating affect performance? The vapour-treated finish on the blade reduces material build-up on the teeth, which helps maintain cutting geometry and prolong effective life during continuous cutting of steel grades. Is the blade compatible with standard 32 mm arbors? Yes, the blade has a 32 mm bore and auxiliary hole pattern for stable mounting on machines using a 32 mm arbor; the SKU is 2000814196NW for reference. What advantage does the 200-tooth BW profile provide? A 200‑tooth BW profile produces finer chips and a smoother cut surface, lowering the need for secondary finishing on delicate or precision components. Can this blade be used on the listed machine brands without modification? The blade lists compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas circular saw machines; correct mounting and machine settings should be verified before production use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-speed steel construction combined with a vapour-treated anti-weld finish for reliable, long-running performance on iron and steel. Order directly via Metav Werkzeuge or consult our specialists for machining advice. TECWERK Metal Circular Saw Blade — 250 mm, HSS, BW tooth, 160 teeth The TECWERK metal circular saw blade is designed for precision cutting of iron and steel in circular sawing machines, offering a fine-tooth profile and a vapour-treated surface to reduce material build-up and extend service life High-speed steel (HSS) construction Vapour-treated anti-weld coating BW arc tooth with alternate bevel 40 mm bore with auxiliary holes Clean, repeatable cuts with high-speed steel and fine tooth geometry Constructed from HSS, this circular saw blade is engineered for consistent performance when cutting ferrous materials. The combination of 250 mm diameter and 160 teeth produces a high tooth engagement frequency that helps create cleaner edges and reduces burr formation on thin sections. The fine tooth count favours applications where surface finish matters and where reduced material tear-out is required. In practical terms, this means fewer secondary operations such as deburring or reworking, improving throughput and reducing labour time. Vapour-treated surface to limit material welding and extend life The blade’s vapour-treated coating functions as an effective barrier against material adhesion and welding at the cutting edge. By inhibiting build-up, the finish helps maintain cutting geometry and thermal stability during extended runs. The result is prolonged blade life and steadier cutting behaviour under continuous use. For industrial workshops and production environments, that translates into fewer blade changes, less downtime and a more predictable tool lifecycle, supporting efficient shop-floor planning. BW tooth form and mounting features for machine compatibility The BW arc tooth with alternate bevel is optimised for cutting a range of iron and steel grades, balancing chip evacuation with a controlled cutting action that reduces vibration. The blade includes a 40 mm central bore and auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) for secure mounting and heat dissipation on compatible circular sawing machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models. These mounting provisions facilitate stable clamping and improved concentricity, which are essential for maintaining cut accuracy and operator safety. Practical benefits for workshop productivity and planning Selecting this blade supports predictable production cycles through reliable material compatibility and straightforward integration into standard sawing equipment. The combination of fine tooth geometry, HSS material and vapour-treated protection reduces the need for frequent adjustments while delivering consistent part quality. For procurement and workshop managers, the emphasis is on reducing process variability and ensuring tools perform consistently across batches, helping to meet delivery schedules with less rework. Discuss specification and compatibility with Metav Werkzeuge to ensure optimal selection for the intended machine and material; our team at Metav Werkzeuge can provide tailored advice and supply from Emmerich. Technical data Article number: 2000814163NW Product: Metal circular saw blade, BW tooth, HSS Brand: TECWERK Facts Diameter: 250 mm Teeth: 160 Width: 2.0 mm Bore diameter: 40 mm Tooth pitch: 5 mm Special features Material: HSS Coating: vapour-treated (anti-weld) Tooth form: BW (arc tooth with alternate bevel) Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Suitable for: iron and steel sawing applications Compatible machines: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials can this blade cut effectively? The TECWERK metal circular saw blade (SKU 2000814163NW) is specified for cutting iron and steel; the HSS construction and BW tooth form are optimised for these ferrous materials. How does the vapour-treated coating help in production? The vapour-treated finish on the TECWERK blade reduces material adhesion and welding at the tooth edge, helping to preserve cutting geometry and extend blade life during continuous operation. Is this blade compatible with my machine? Compatibility depends on arbor size and machine type; the blade features a 40 mm bore and auxiliary holes for secure mounting and is intended for use with common industrial circular sawing machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra. What advantages does the BW tooth form provide? The BW arc tooth with alternate bevel offers a balanced cutting action that improves surface finish and chip control when cutting steel, reducing vibration and the need for secondary finishing. How often should the blade be replaced in a production setting? Replacement intervals depend on material, feed rate and cutting conditions; the HSS material and vapour-treated coating are chosen to maximise service life, reducing the frequency of changes compared with untreated alternatives. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS‑Co construction and a vapour‑treated coating to reduce material build‑up and extend service life; the fine 200‑tooth BW geometry combined with a 2.0 mm kerf delivers smooth, low‑burr cuts in stainless and high‑strength steels — order directly via Metav Werkzeuge or request tailored advice from our consultants. TECWERK HSS‑Co 250 mm circular metal saw blade (200 teeth, 2.0 mm kerf) The TECWERK HSS‑Co 250 mm circular metal saw blade is engineered for precision sawing of stainless and other high‑strength steels in industrial circular sawing machines HSS‑Co high‑speed steel with cobalt alloy Vapour‑treated coating prevents material welding Fine 200‑tooth BW pattern for smooth stainless cuts 250 mm diameter, 2.0 mm kerf, 32 mm bore Precision cutting for stainless and high‑strength steels The blade’s HSS‑Co composition provides a high red‑hardness and wear resistance that translates into consistently accurate cuts under industrial loads. With a 200‑tooth configuration and the BW tooth geometry (bow tooth with alternating bevel), the blade produces a fine surface finish and reduced burr formation. For workshops and production lines where component tolerances and finish quality matter, this saw blade improves downstream processing by lowering the need for extensive deburring and secondary operations, thereby increasing throughput and reducing total machining time. Less welding and cleaner edges thanks to vapour treatment A vapour‑treated coating acts as a barrier against material adhesion and reduces the tendency of stainless and tough alloys to weld onto the cutting edge. The treatment enhances chip evacuation and keeps gullets clear, which maintains cutting performance during long runs. As a result, the tool life is extended and cycle stability improves, supporting predictable production schedules and diminishing unscheduled blade changes. The practical benefit is fewer interruptions and a steadier quality of cut across batches. Straightforward integration with common circular sawing systems Mounting is simplified by the standard 32 mm bore combined with the specified auxiliary holes pattern (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm), ensuring compatibility with a wide range of industry machines such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models. The 2.0 mm kerf strikes a balance between material saving and rigidity, making the blade suitable for automated sawing stations and manual saw benches alike. Clear machine compatibility reduces setup time and supports rapid changeovers in mixed‑production environments. Robust design for economic performance and uptime Constructed for demanding workshop use, the blade combines durability with efficient cutting dynamics. The narrow 2.0 mm cut minimises material loss per stroke, contributing to cost efficiency on high‑volume runs, while the cobalt alloy base metal sustains cutting temperatures for longer tool life. For procurement and maintenance planning, this means fewer replacements and a lower total cost of ownership over time. Metav’s logistics and quality control further ensure reliable supply and consistent tool quality for every order. For tailored recommendations on the TECWERK HSS‑Co 250 mm blade and to secure supply for your workshop, contact Metav Werkzeuge for specification advice and ordering assistance. Technical data Article number: 2000814206NW Label: Metallkreissägeblatt Form BW D.250mm B.2,0mm HSS‑Co Bohr.‑D.32mm Z.200 TECWERK Manufacturer: TECWERK Facts Diameter: 250 mm Width / kerf: 2.0 mm Teeth: 200 Bore diameter: 32 mm Pitch / division: 4 Packaging unit: 1 Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: vapour‑treated for protection against material welding Tooth form: BW — bow tooth with alternating bevel Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Application: for stainless (VA) and other high‑strength steels Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this saw blade suited for? This TECWERK HSS‑Co circular metal saw blade is designed for stainless steel and other high‑strength steels, with a vapour‑treated coating to reduce adhesion during cutting. Which machines will accept this blade? The blade’s 32 mm bore and auxiliary hole pattern match a range of industrial circular sawing systems, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines. How does the BW tooth geometry affect finish? The BW (bow tooth with alternating bevel) geometry, together with the fine tooth count, delivers a smoother edge and lower burr formation, reducing the need for secondary finishing. What are the key dimensions to check before ordering? Confirm the 250 mm diameter, 32 mm bore, 2.0 mm kerf and the auxiliary hole pattern to ensure proper mounting and secure fixation. Can the vapour‑treated coating be expected to extend tool life? Yes, the vapour treatment helps prevent material build‑up and improves chip evacuation, which contributes to longer effective cutting life and more stable operation. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of HSS construction, a vapour-treated anti-weld coating and the fine 128-tooth C-tooth geometry for reliable, burr-reduced metal cutting; order the blade directly via Metav Werkzeuge or consult our specialists for application advice. Metal circular saw blade, Form C, Ø250 mm, 2.0 mm, HSS – TECWERK The Metal circular saw blade, Form C, Ø250 mm, 2.0 mm, HSS – TECWERK is designed for precise cutting of iron and steel in industrial and workshop settings *HSS construction for durable edge retention *Vapour-treated coating reduces material welding *128 C-shaped teeth for fine, burr-free cuts *32 mm bore with multiple auxiliary holes Faster, more consistent cuts through hard materials Constructed from HSS, this circular blade combines toughness with wear resistance to maintain cutting performance under frequent use. The vapour-treated coating acts as an anti-weld barrier, reducing heat-induced material buildup on the teeth and extending service intervals. Together, the hardened steel substrate and protective treatment enable higher productivity on repetitive cuts and reduce downtime for tooth cleaning or replacement. The result is a more economical tool life and fewer interruptions in metalworking workflows. Clean edges and reduced secondary finishing The blade’s C-tooth geometry with 128 teeth provides a balance between material removal and surface quality. C-shaped teeth with pre- and post-cutting edges create smaller chips and a smoother kerf, which translates into less burr formation and reduced need for secondary deburring. For fabricators and precision workshops where part tolerances and finish matter, this tooth form offers clear operational advantages—faster throughput and less manual rework—when machining iron and steel components. Secure fitment and vibration control for stable cuts A 32 mm bore combined with a pattern of auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) helps to centre the blade and dissipate cutting forces, improving runout behaviour on compatible machines. The narrow 2.0 mm blade width reduces material loss per cut while the hole pattern supports heat dispersion, contributing to dimensional stability over long runs. Compatibility with established circular saw systems, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines, ensures straightforward integration into existing production lines. Practical benefits for workshop integration This blade is supplied as a single unit and is optimised for repetitive metal sawing tasks. The combination of HSS material, the vapour-treated finish and fine tooth count means fewer replacements and a consistent cut quality throughout its lifetime. For procurement and maintenance teams, the predictable behaviour of the blade simplifies inventory planning and supports a continuous production flow without unexpected performance drops. Contact Metav Werkzeuge for tailored application support and secure a TECWERK metal circular saw blade for precise steel and iron cutting — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000814244NW UID: 2000814244NW Label: Metallkreissägeblatt Form C D.250mm B.2,0mm HSS Bohrungs-D.32mm Z.128 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Facts Diameter: 250 mm Blade width: 2.0 mm Bore diameter: 32 mm Teeth: 128 Tooth form: C Pitch: 6 Packaging unit: 1 Special features Material: HSS Coating: vapour-treated Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Application: suitable for iron and steel materials Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this blade intended for? The Metal circular saw blade, Form C, Ø250 mm, 2.0 mm, HSS – TECWERK is designed primarily for cutting iron and steel materials, offering improved life and finish when used on suitable saws. How does the vapour-treated coating improve performance? The vapour-treated coating on this TECWERK blade reduces material adhesion and welding on the teeth during hot cutting, which helps to preserve cutting geometry and extends time between maintenance actions. Why choose a 128-tooth C-tooth blade over coarser alternatives? A 128-tooth C-tooth configuration delivers a finer surface finish and smaller chips, decreasing burr formation and lowering the need for subsequent deburring on steel components. Which bore and auxiliary hole arrangement does the blade use? The blade features a 32 mm central bore and multiple auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) to support secure mounting and better heat and vibration management on compatible machines. Is this blade compatible with common circular saw brands? Yes, the TECWERK blade is specified for use with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas circular saw machines and fits standard mounting configurations for these systems. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining HSS construction, a vapour‑treated anti‑weld surface and a fine 100‑tooth C‑form geometry, this blade delivers clean, consistent cuts in iron and steel while reducing rework and stoppages. Order the blade directly via Metav Werkzeuge or consult our specialists for machine compatibility. TECWERK metal circular saw blade, HSS, Ø250 mm, 100 teeth A TECWERK metal circular saw blade designed for precision cutting of iron and steel in bench and automatic circular saw machines HSS material, vapour-treated coating 100 C‑form teeth for fine metal finishes Ø250 mm diameter, 2.0 mm kerf 32 mm bore with multiple mounting holes Consistent accuracy and higher throughput The HSS body and the 100‑tooth C‑form geometry combine to provide a fine, repeatable cut with low burr formation. High tooth count and the C‑form (arc) tooth – which includes a leading and trailing cutting edge – reduce vibration and improve surface finish on ferrous workpieces. For production environments this means fewer secondary operations and a more predictable cycle time, particularly when processing batch runs of iron and steel components. Reduced material adhesion and extended service life A vapour‑treated anti‑weld surface minimises material build‑up on cutting edges, which is a common cause of premature wear and tooth damage when sawing ferrous alloys. The surface treatment acts as a barrier against micro‑welding of hot chips, maintaining cutting geometry for longer and lowering downtime for cleaning or edge dressing. This results in steadier cutting forces and better tool life compared with untreated high‑speed steel blades. Secure mounting and broad machine compatibility The blade features a 32 mm bore with a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to suit a range of mounting carriers and adaptors. With a slim 2.0 mm kerf (width) the blade balances material removal and rigidity, keeping the cut narrow while resisting deflection. Compatibility with common circular saw brands such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas ensures straightforward integration into typical workshop saws and automatic cutting lines. Practical benefits for the workshop and procurement For metalworking shops and industrial fabricators the blade offers a practical mix of durability, finish quality and straightforward logistics. The combination of HSS material and anti‑weld treatment reduces frequency of blade changes, while the standard Ø250 mm size and auxiliary holes simplify stock management and mounting. Procurement benefits from reduced supplier variety when selecting a versatile blade that covers routine ferrous cutting tasks with reliable repeatability. For TECWERK HSS performance and seamless supply, contact Metav Werkzeuge to confirm machine fitment and secure delivery from our Emmerich warehouse. Technical data Article number: 2000814245NW Label: Metal circular saw blade Form C Ø250 mm B 2.0 mm HSS, bore Ø32 mm, Z 100 TECWERK Manufacturer: TECWERK Numbers / Core technical data Diameter: 250 mm Bore diameter: 32 mm Width / kerf: 2.0 mm Teeth: 100 Division (pitch): 8 Special features Material: HSS Coating: vapour‑treated (anti‑weld protection) Tooth form: C (arc tooth with leading and trailing cutting edges) Auxiliary mounting holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Suitable for: iron and steel materials Compatible with: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ Is this blade suitable for cutting steel and iron? The TECWERK metal circular saw blade (SKU 2000814245NW) is designed specifically for cutting iron and steel, combining HSS construction and a vapour‑treated surface to handle ferrous materials reliably. What does the vapour‑treated coating achieve? The vapour‑treated coating on this TECWERK blade reduces material adhesion and micro‑welding to the teeth, improving tool life and maintaining cutting performance over longer runs. Which machines accept this blade? Mounting provisions and bore size make the blade compatible with common circular saw brands; it is suitable for use in Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines when the arbor and adaptors match the 32 mm bore and auxiliary hole pattern. How does the 2.0 mm kerf affect cutting? A 2.0 mm kerf balances reduced material loss with adequate stiffness, resulting in efficient chip evacuation while maintaining straight, low‑deformation cuts for many workshop applications. When should the blade be resharpened or replaced? Sharpening intervals depend on material hardness, feed rate and cutting conditions; observe blade wear, cutting quality and cutting forces. The vapour‑treated HSS blade typically offers longer intervals between regrinds than untreated equivalents. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high‑precision combination of HSS construction, a vapour‑treated surface to reduce material adhesion and a fine 128‑tooth configuration for clean edges and minimal burr formation; order the blade directly via Metav Werkzeuge or consult our specialists for compatibility advice. TECWERK metal circular saw blade – 250 mm, HSS, 128 teeth TECWERK metal circular saw blade – Form C, designed for clean cuts in iron and steel with a 40 mm bore High‑speed steel construction for durability Vapour‑treated surface to reduce material welding Fine 128‑tooth configuration for smooth finishes 40 mm bore with auxiliary holes for machine fitment Precision cutting for steel and iron with minimal material loss The HSS body delivers a reliable balance between toughness and edge retention, enabling consistent cutting performance across ferrous materials. Combined with a 2.0 mm kerf, the blade reduces material waste and offers efficient chip evacuation during through‑cuts. The 128 teeth and close pitch support fine, burr‑minimised finishes on panels and profiles, making the blade suitable where a high quality edge is required rather than aggressive stock removal. This combination of geometry and material reduces rework and contributes to improved throughput on production runs. Reduced build‑up and extended service life thanks to vapour treatment A vapour‑treated surface acts as a protective layer to reduce material adhesion and limit the formation of built‑up edge during prolonged cutting of iron and steel. This steam treatment lowers friction at the cutting zone and helps maintain cutting geometry between sharpening intervals. The result is more predictable cutting performance and longer intervals between maintenance, which supports continuous operation on workshop saws and reduces downtime for blade changes or dressing. Machine compatibility and reliable mounting for safe operation The blade features a 40 mm bore and auxiliary hole pattern (2 x 8/55 mm; 4 x 12/64 mm) to match a broad range of circular saw machines. The C tooth form (curved tooth with leading and trailing cutting edges) offers a controlled entry and exit action that helps prevent snatching and facilitates steady feed rates on both manual and automated saws. Confirm compatibility with the intended machine brand and arbor specifications before installation to ensure a secure fit and consistent concentricity during operation. Practical handling and application notes for workshop use This tool is configured primarily for ferrous workpieces such as iron and steel. The close tooth spacing and fine geometry favour cutting of sheet and thin plate where edge quality is critical. For optimal performance, use appropriate cutting fluids or coolant as recommended for the machine and material combination, and verify that the saw’s maximum permissible speed matches the blade’s design. Regular inspection of the mounting rings and auxiliary holes ensures stable seating and helps maintain cutting accuracy over repeated cycles. For specialist advice on integrating this TECWERK vapour‑treated HSS circular saw blade into an existing workflow, contact Metav Werkzeuge for tailored recommendations and reliable dispatch from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000814165NW Label: Metallkreissägeblatt Form C D.250mm B.2,0mm HSS Bohrungs‑D.40mm Z.128 TECWERK Numbers / Core technical data Diameter: 250 mm Width / kerf: 2.0 mm Teeth: 128 Pitch: 6 Bore diameter: 40 mm Packaging unit: 1 Designs / Special features Material: HSS Coating / treatment: vapour‑treated (steam treatment to reduce material welding) Tooth form: C (curved tooth with leading and trailing cutting edges) Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Suitable for: iron and steel workpieces Compatibility: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is this blade suited for? The TECWERK metal circular saw blade is designed primarily for cutting iron and steel; its HSS construction and vapour treatment reduce adhesion and support clean edge quality on ferrous materials. How does the vapour treatment benefit cutting performance? Vapour treatment on the blade surface limits material welding and lowers friction at the cutting edge, which helps the blade keep its geometry longer and reduces the frequency of maintenance for the TECWERK circular saw blade (SKU 2000814165NW). Which machines will this blade fit? The blade’s 40 mm bore and auxiliary hole pattern (2 x 8/55 mm; 4 x 12/64 mm) make it compatible with a range of circular saw machines, including common models from Eisele, Ulmia, Trennjäger, Rekord and Ultra, when the machine arbor and hole pattern match. What cutting quality can be expected from the 128‑tooth configuration? A fine 128‑tooth arrangement produces smoother cuts with reduced burr formation compared with coarser blades, making it suitable for applications where finish quality is a priority rather than rapid stock removal. Are there special mounting or operational precautions? Ensure correct seating on the arbor and that the auxiliary holes align with the machine’s locating pins; check machine speed limits and use recommended coolant practices to preserve blade life and cutting accuracy. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a 250 mm diameter, HSS‑Co construction combined with a vapour‑treated coating for reliable cutting of stainless and high‑strength steels; order directly via Metav Werkzeuge or consult the technical team for machine compatibility and application advice. TECWERK metal circular saw blade Form BW, 250 mm, HSS‑Co, 160 teeth A TECWERK metal circular saw blade Form BW engineered for precise, low‑burr cutting of stainless and other high‑strength steels on band and circular sawing machines. HSS‑Co for high cutting performance Vapour‑treated coating reduces material build‑up BW arc teeth with rakers and pre/post cutters 32 mm bore with multiple auxiliary holes Higher cutting performance for demanding steels Manufactured from HSS‑Co (cobalt‑alloy high‑speed steel), this circular saw blade delivers improved heat resistance and sustained edge life when working with stainless steel and other high‑strength materials. The 160 teeth count together with the fine 2.0 mm kerf produce a consistent, smooth cut and reduced deburring, which lowers downstream finishing time. For workshops seeking predictable tool longevity, the cobalt alloy base material offers a technical advantage: increased hardness at elevated temperatures, which translates into longer life under heavy use and higher cutting speeds. Anti‑weld protection and refined tooth geometry for cleaner cuts The blade’s vapour‑treated coating acts as an anti‑weld layer, inhibiting material adhesion and helping to maintain sharp cutting edges during long runs. The BW tooth form — an arc‑shaped tooth with dedicated rakers and pre‑/post‑cutters — balances chip formation and surface finish, keeping kerf loads stable and improving chip evacuation. Auxiliary hole patterns and a central 32 mm bore also aid heat dissipation and permit secure mounting on a wide range of saw frames, reducing vibration and promoting consistent feed behaviour. Compatibility, applications and workshop benefits Designed for use on common industrial saws, the blade adapts to a variety of band and circular sawing machines from established manufacturers. The combination of a 250 mm diameter, narrow 2.0 mm width and dense tooth pitch suits jobs where material conservation and a fine surface finish are priorities, such as cutting stainless sections, alloy steels and other high‑strength components. For production environments, this blade reduces secondary work, increases throughput, and supports predictable maintenance cycles — making it a practical choice for metalworkers aiming to streamline operations without sacrificing cut quality. For precision cutting of stainless and high‑strength steels, request the TECWERK metal circular saw blade from Metav Werkzeuge—our consultants at Metav can advise on machine compatibility and optimal cutting parameters Technical data Article number: 2000814230NW Product type: Metal circular saw blade Manufacturer: TECWERK SKU: 2000814230NW Numbers / Core technical data Diameter: 250 mm Width: 2.0 mm Teeth: 160 Bore diameter: 32 mm Pitch: 5 Designs / Special features Material: HSS‑Co Coating: vapour‑treated Tooth form: BW (arc tooth with raker and pre/post cutter) Anti‑weld protection for material build‑up reduction Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas machine types Packaging unit: 1 FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade (SKU 2000814230NW) is designed primarily for stainless steel and other high‑strength steels; the HSS‑Co composition and vapour‑treated coating help resist heat and material adhesion. How does the BW tooth form affect cut quality? The BW arc tooth form, with integrated rakers and pre/post cutters, delivers a fine surface finish and controlled chip formation, so the blade produces lower burr and reduces the need for secondary finishing. Which machines is the blade compatible with? Compatibility includes common industrial sawing systems such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models; correct mounting to the 32 mm bore and auxiliary hole pattern is required. What benefits does the vapour‑treated coating provide? The vapour‑treated coating on this TECWERK blade reduces material build‑up and weld‑on during cutting, maintaining edge sharpness and consistent cutting performance over extended runs. Is the blade suitable for high feed rates and continuous operation? Constructed from HSS‑Co and featuring anti‑adhesion treatment, the saw blade is suitable for demanding production conditions with elevated cutting speeds and extended operating periods, subject to correct machine setup and coolant use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a HSS construction and vapour-treated surface together with a dense 180-tooth BW geometry for precise, burr-free cuts in iron and steel; order the blade directly via Metav Werkzeuge or ask our consultants if needed. Metal circular saw blade Form BW, 275 mm, HSS, 180 teeth (TECWERK) — Vapour-treated, 32 mm bore for industrial metal cutting A metal circular saw blade Form BW intended for precision cutting of iron and steel on industrial circular saw machines, featuring a narrow 2.5 mm kerf and an anti-weld surface treatment. HSS construction for lasting edge life Vapour-treated against material welding BW arc tooth with alternate bevel Compatible with 32 mm bore machines High-efficiency cutting for demanding metalwork The blade delivers consistent cutting performance through its HSS body and an optimised BW tooth geometry. The arc-shaped teeth with alternately bevelled tips reduce burr formation and improve chip evacuation, which results in faster feed rates and more predictable cycle times. For production environments where throughput matters, the combination of 275 mm diameter and 180 teeth provides a fine, accurate finish while maintaining material removal efficiency, reducing the need for secondary deburring operations. Reduced material adhesion and longer service life A key benefit is the vapour-treated surface that acts as a barrier against material build-up on the cutting edges. This treatment is applied to protect the tooth tips from welding of hot chips and workpiece adhesion, maintaining cutting geometry and prolonging service intervals. The result is less frequent blade dressing and a more stable cutting quality over longer runs, which supports cost-effective maintenance planning and lowers unplanned downtime in workshops and small production lines. Narrow kerf and machine compatibility for precise results With a kerf of 2.5 mm and a central 32 mm bore, the saw blade is designed for machines that require a slim cut and minimal material loss. The dense tooth count suits thin-section and fine-profile cutting tasks, delivering controlled heat generation and reduced distortion in the workpiece. Compatibility notes indicate fitment with common industrial circular saw manufacturers such as Berg & Schmid, MEP, Pedrazzoli, Kasto and Thomas, enabling straightforward integration into existing metalcutting setups without extensive retooling. Practical advantages for procurement and workshop use The blade’s specification supports streamlined inventory decisions: a single HSS type suitable for a broad range of ferrous alloys and a protective finish that lowers the frequency of replacements. The saw blade is supplied with multiple auxiliary holes and a 32 mm bore to match machine mounting patterns, which reduces setup time. For buyers seeking a reliable consumable that balances precision, longevity and machine compatibility, this option presents a pragmatic choice for both jobbing shops and light production lines. For reliable, high-precision cutting choose the TECWERK metal circular saw blade — contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery. Technical data Article number: 2000814199NW Product label: Metallkreissägeblatt Form BW D.275mm B.2,5mm HSS Bohrungs-D.32mm Z.180 TECWERK Manufacturer: TECWERK Facts Diameter: 275 mm Width (kerf): 2.5 mm Teeth: 180 Bore diameter: 32 mm Pitch: 5 Packaging unit: 1 Special features Material: HSS Coating: vapour-treated Tooth form: BW (arc tooth) with alternate bevel Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Application: for iron and steel Compatibility: Berg & Schmid, MEP, Pedrazzoli, Kasto, Thomas circular saw machines FAQ Which materials can this saw blade cut effectively? The metal circular saw blade (TECWERK metal circular saw blade, SKU 2000814199NW) is specified for iron and steel applications and is vapour-treated to reduce material adhesion during such cuts. What does vapour-treated mean in practical terms? Vapour-treated indicates a surface treatment applied to the HSS body to protect against chip welding and material build-up, helping the TECWERK saw blade maintain cutting geometry and extend service life. Is the blade suitable for thin-section cutting and fine finishing? Yes, the combination of a 2.5 mm kerf and 180 teeth makes the saw blade well suited for fine-profile and thin-section cuts where a smooth finish and tight tolerances are required. Which machines is the blade compatible with? The blade fits machines with a 32 mm bore and auxiliary hole patterns; compatibility includes Berg & Schmid, MEP, Pedrazzoli, Kasto and Thomas circular saw machines as listed in the product data. How do the auxiliary holes affect fitting and performance? The auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) provide multiple mounting options and help to improve balance and heat distribution during cutting, which benefits the TECWERK circular saw blade’s stability and lifespan. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Achieve reliable, repeatable cutting performance with a HSS construction and a vapour‑treated edge that resists material build‑up; the 275 mm diameter and 110 teeth produce a fine kerf while the 2.5 mm blade thickness keeps material waste low. Order directly via Metav Werkzeuge or consult the Metav team for suitability and delivery from Emmerich. TECWERK metal circular saw blade — 275 mm, HSS, 110 teeth (Form C) The TECWERK metal circular saw blade is a high‑performance blade for industrial metalworking, engineered for precise cutting of ferrous materials on heavy‑duty saw machines HSS construction for high cutting strength Vapour‑treated to reduce material build‑up 275 mm diameter with 110 teeth 32 mm bore with multiple auxiliary holes Higher productivity through material‑specific design Constructed from HSS, the blade combines wear resistance with toughness, providing consistent cutting quality under industrial loads. The 275 mm diameter and dense 110 teeth arrangement deliver a fine finish on cuts while the 2.5 mm kerf reduces scrap volume. The 8 mm pitch balances chip removal and surface quality, so fewer secondary operations are required. These technical characteristics translate into measurable production gains: less time spent on deburring and a lower reject rate, supporting an efficient workflow. Cleaner cuts and longer service life in steelworking The Form C arc tooth geometry with pre‑ and follow‑cutting edges promotes even chip formation and a reduced burr on exit faces, making the blade especially suitable for iron and steel. The vapour‑treated surface acts as a barrier against material welding on the tooth tips, maintaining cutting geometry for longer and reducing the frequency of intervention. For workshops processing heavy ferrous stock, this means more hours of effective cutting between maintenance cycles and a steadier part quality. Practical mounting and vibration control for stable operation The blade features a 32 mm bore and a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) that aid cooling, reduce vibration and ensure compatibility with common industrial saw arbors. These secondary apertures help dissipate heat and allow secure clamping on a wide range of saw models, improving run‑out and extending tool life. The configuration supports repeatable clamping and quick change‑overs in production settings where minimising downtime is critical. Compatibility, handling and workshop advantages Designed for use with established metal sawing systems, the blade supports a range of manufacturers and machine types, helping to standardise tooling across fleet equipment. The combination of precision tooth form, HSS material and vapour‑treated surface offers tangible benefits for fabricators and service shops: improved surface quality, reduced rework and predictable tool life. Regular cleaning of the cutting face and inspection of teeth before each shift will preserve the blade’s performance and maintain consistent cut quality. Contact Metav Werkzeuge for expert advice on compatibility with specific saw models and reliable supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss workshop requirements and delivery options Technical data Article number: 2000814197NW Designation: Metal circular saw blade Form C, 275 mm, HSS, 110 teeth Manufacturer: TECWERK Core specifications Diameter: 275 mm Kerf width: 2.5 mm Bore diameter: 32 mm Teeth: 110 Pitch: 8 mm Tooth form: C Features & suitability Coating: vapour‑treated (protection against material build‑up) Material: HSS (high‑speed steel) Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Suitable for iron and steel materials Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas saw machines FAQ Is this blade suitable for cutting steel? The metal circular saw blade is designed specifically for ferrous materials; the HSS construction and vapour‑treated edge make it well suited to cutting various iron and steel grades with reduced build‑up. Which machines is the blade compatible with? Compatibility includes common industrial saw brands such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, thanks to the 32 mm bore and multiple auxiliary holes for secure mounting. How does the vapour treatment improve performance? Vapour treatment provides a thin surface layer that reduces material welding to the tooth tips, helping the blade retain its cutting geometry and extending the intervals between cleaning and maintenance. What mounting information is relevant for fitment? The blade has a 32 mm central bore and auxiliary holes arranged as 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm to accommodate different arbors and flanges and to support stable clamping on compatible saws. How should the blade be maintained to preserve cutting quality? Regular removal of swarf and residue, visual inspection of the teeth and adherence to recommended feed rates will prolong life; sharpening by a professional service maintains the original tooth geometry. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high-speed steel robustness, vapour-treated anti-weld coating and precise 275 mm diameter for reliable metal cutting; order directly via Metav Werkzeuge or consult the team for machine compatibility and delivery. Metallkreissägeblatt Form C D.275 mm B.2,5 mm HSS, Ø40 mm bore – TECWERK A TECWERK metal circular saw blade designed for heavy-duty ferrous cutting with a C-shaped tooth geometry for clean separation on stationary metal saws High-speed steel (HSS) construction Vapour-treated anti-weld coating 275 mm diameter, 2.5 mm cutting width Efficient metal cutting for industrial workshops Constructed from high-speed steel (HSS), this circular saw blade offers consistent hardness and wear resistance that supports continuous operation in demanding fabrication environments. The 84-tooth arrangement and Form C tooth geometry ensure a balance between cutting speed and surface finish, reducing the need for secondary operations. The blade’s 275 mm diameter and 2.5 mm cutting width provide stable chip evacuation and lower kerf loss, which together contribute to higher material yield and predictable cycle times on compatible machine models. Operators benefit from fewer interruptions and a uniform cut quality when processing a range of ferrous materials. Reduced adhesion and extended service intervals A vapour-treated surface finish acts as an anti-weld barrier, reducing material buildup on the cutting edges during hot cutting of steel and cast iron. This treatment lowers friction at the cutting zone and helps to maintain tooth geometry under load, which extends the blade’s effective lifetime and reduces downtime for cleaning or premature regrinding. The presence of multiple side holes and a centred 40 mm bore supports reliable mounting and heat dissipation on stationary circular saws, improving stability at higher feed rates. The result is a tool that sustains consistent performance under continuous production conditions. Designed for compatibility and predictable results Specified compatibility with established metal sawing systems such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models ensures straightforward integration into many workshop setups. The C tooth form, featuring forward and trailing cutting edges, offers controlled chip formation and smooth entry into the workpiece, which is especially useful for thin-walled or precision components. For fabricators and subcontractors focused on throughput and repeatability, this blade supports reliable part geometry and reduces scrap rates when paired with appropriate clamping and coolant strategies. Contact Metav Werkzeuge for tailored application advice and fast delivery from Emmerich — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814167NW Product type: Metal circular saw blade Label: Metallkreissägeblatt Form C D.275 mm B.2,5 mm HSS Bohrungs-Ø 40 mm Z.84 TECWERK Facts Diameter: 275 mm Cutting width: 2.5 mm Bore diameter: 40 mm Teeth: 84 Pitch: 10 Packaging unit: 1 Special features Material: HSS (high-speed steel) Coating: vapour-treated (anti-weld protection) Side holes: 2 x 8/55 mm; 4 x 12/64 mm Tooth form: C (arc-shaped tooth with fore and aft cutting edges) Compatibility: for Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials can this circular saw blade process? The Metallkreissägeblatt Form C is made from HSS and, with its vapour-treated coating, is intended for cutting ferrous materials such as steel and cast iron; suitability for stainless grades depends on cutting parameters and coolant. How does the vapour-treated coating benefit operation? Vapour-treated surfaces on the TECWERK blade reduce material adhesion at the tooth tips, which leads to longer intervals between maintenance and more consistent cutting behaviour during extended runs. Which machines is the blade compatible with? This circular saw blade fits many stationary metal-cutting saws and is specified for common models including Eisele, Ulmia, Trennjäger, Rekord and Ultra, using the 40 mm bore and side-hole pattern for secure mounting. What is the significance of the Form C tooth geometry? Form C teeth provide an arc-shaped profile with forward and trailing cutting edges that promote smooth chip formation and a good surface finish, making the blade suitable for precision separation of steel components. Can the blade be used on thin-walled workpieces? With its 2.5 mm cutting width and balanced tooth count, the blade offers controlled entry and reduced vibration, which helps to maintain part integrity on thinner sections when correctly set up. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS construction, a vapour‑treated anti‑weld coating and a fine 110‑tooth geometry for consistently clean cuts in iron and steel; order directly via Metav Werkzeuge or consult our team for machine compatibility and optimal tool selection TECWERK metal circular saw blade, Form C, 275 mm, HSS – 110 teeth, vapour‑treated A TECWERK metal circular saw blade engineered for precision cutting of iron and steel on compatible circular sawing machines, offering reduced material build‑up and a fine surface finish HSS construction for extended durability Vapour‑treated anti‑weld surface protection 110 teeth for fine, smooth cutting 32 mm bore with multiple auxiliary holes Precision cutting performance for iron and steel Made from HSS (high‑speed steel), this blade delivers high thermal stability and sustained edge retention when cutting ferrous materials. The 275 mm diameter paired with 110 teeth enables a finer chip size and a smoother finish compared with coarse‑tooth alternatives, which reduces secondary machining. For workshops needing reliable repeatability, the metal blade’s geometry balances cutting speed and surface quality, resulting in fewer rejects and improved throughput without compromising tool life. Coating that prevents material adhesion and extends service life The vapour‑treated surface acts as an anti‑weld barrier, decreasing the tendency for hot metal to adhere to the cutting edges during aggressive sawing operations. This treatment lowers friction and helps maintain consistent cutting behaviour over longer runs. The protective layer therefore contributes directly to longer maintenance intervals and reduced downtime, which supports cost‑efficient production scheduling in metalworking environments. Tooth geometry designed for a clean, burr‑reduced finish The Form C tooth is an arc tooth with both leading and trailing cutting edges, optimised for chip formation and evacuation. This geometry produces a finer kerf and fewer burrs on the workpiece, meaning less finishing and improved dimensional tolerances on critical components. For applications where surface quality and edge integrity matter, the tooth shape provides reliable repeatable results with minimal secondary processing. Practical mounting and machine compatibility for easy replacement The blade’s 32 mm bore and pattern of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) ensure secure mounting and compatibility with a range of circular sawing frames. With a 2.0 mm kerf the saw blade balances material removal and rigidity, reducing vibration and improving cut straightness. Designed for use on Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines, the blade integrates into standard workshop setups and supports a trouble‑free changeover process. For workshop‑grade precision and tailored advice on blade selection and machine compatibility, contact Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm the best configuration for specific materials and sawing machines Technical data Article number: 2000814248NW Description: metal circular saw blade Diameter: 275 mm Bore diameter: 32 mm Kerf/width: 2.0 mm Teeth: 110 Material: HSS Coating: vapour‑treated Tooth form: C Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Pitch: 8 Packaging unit: 1 Facts Diameter: 275 mm Teeth count: 110 Kerf: 2.0 mm Bore: 32 mm Pitch: 8 Packaging unit: 1 Special features Vapour‑treated surface for anti‑weld protection Suitable for iron and steel materials Form C arc tooth with leading and trailing cutting edges Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular sawing machines HSS material for thermal stability and edge retention FAQ What materials is this saw blade suitable for? The TECWERK metal circular saw blade is specified for iron and steel materials and performs best where high cutting temperatures and chip control are required. How does the vapour‑treated coating help in daily use? The vapour‑treated coating reduces material adhesion to the cutting edges, which helps maintain consistent cutting performance and extends the effective service life of the saw blade. Which machines is the blade compatible with? The blade is designed for use on a range of circular sawing machines, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models; check bore and auxiliary hole patterns for exact fit. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS blade with a vapourised surface and fine 220-tooth configuration for consistently clean cuts in iron and steel; order via Metav Werkzeuge or request expert advice from our consultants for machine compatibility and delivery from Emmerich. TECWERK metal circular saw blade D275 mm – HSS, BW tooth The TECWERK metal circular saw blade D275 mm is a high-precision cutting disc for stationary metal-cutting circular saws, engineered for fine separation of iron and steel in industrial and specialist workshop environments. HSS construction for long service life Vapour-treated surface to reduce welding 220 BW teeth for fine, burr‑free cuts 40 mm bore with auxiliary holes for secure mounting High-precision cutting performance for steelwork The HSS construction and dense tooth configuration provide a reliable combination of rigidity and cutting edge retention. With HSS material and 220 teeth, the blade delivers consistent kerf control and reduced vibration during operation, which directly benefits throughput by lowering rework rates. The relatively narrow 2.5 mm plate minimises material loss while maintaining the stiffness needed for repeatable results on beams, bars and profiles made from iron and steel. Reduced material build-up and improved cutting quality A vapourised coating and additional steam-treated surface protection reduce the tendency for chips and workpiece material to weld onto the cutting edges during high-temperature cutting. The BW tooth geometry (bow tooth with alternate bevel) promotes efficient chip evacuation and produces a smoother cut face, so finishing operations are reduced. These design choices contribute to longer periods between dressing and blade changes, improving machine uptime. Ready for secure fitting and versatile machine use A 40 mm bore with two auxiliary holes (2 x 8/55 mm) and four auxiliary holes (4 x 12/64 mm) enables secure attachment to a range of industrial saw spindles. The blade is compatible with common stationary saw models such as Eisele, Ulmia, Trennjäger, Rekord and Ultra, allowing straightforward retrofitting in many workshop setups. The combination of precise mounting and balanced tooth count supports stable rotation at recommended saw speeds. Practical advantages for workshop workflows Built to process ferrous materials, the blade is particularly suited to repetitive production or high-precision fabrication where dimensional reliability matters. The 275 mm diameter and fine tooth pitch reduce burr formation and support cleaner joints for subsequent welding or assembly. Supplied as a single unit per packaging, the product supports lean inventory practices while delivering the robust cutting performance expected in professional environments. For procurement, compatibility checks or technical clarifications regarding the TECWERK metal circular saw blade D275 mm, contact Metav Werkzeuge – stock and expert support are available from Emmerich; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: 2000814174NW Product type: Metal circular saw blade Manufacturer: TECWERK Diameter: 275 mm Kerf/width: 2.5 mm Teeth: 220 Material: HSS Facts Bore diameter: 40 mm Tooth pitch: 4 Tooth form: BW (bow tooth with alternate bevel) Packaging unit: 1 Special features Vapourised coating Steam-treated to reduce material build-up Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra saw machines FAQ What materials can this blade process? The TECWERK metal circular saw blade D275 mm is designed primarily for ferrous materials and is optimised for iron and steel cutting tasks. How does the vapourised surface help in daily use? The vapourised coating on the TECWERK blade reduces workpiece material welding to the cutting edge, improving cut quality and extending operational intervals between dressing. Is the blade suitable for my machine spindle? The blade’s 40 mm bore plus auxiliary holes (2 x 8/55 mm and 4 x 12/64 mm) allow compatibility with many stationary saw spindles; confirm fitment against the saw manufacturer’s mounting specifications before installation. What cut quality can be expected with 220 teeth? A 220‑tooth configuration on a 275 mm disc delivers fine, low-burr cuts suitable for finishing-sensitive work and reduces the need for subsequent machining. What is the SKU for ordering and reference? Reference SKU 2000814174NW when enquiring about the TECWERK metal circular saw blade D275 mm to ensure accurate supply and technical support. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine the HSS base metal with a vapour-treated coating and a fine BW tooth geometry for consistently clean cuts in ferrous materials; order directly via Metav Werkzeuge or consult our specialists for machine compatibility and delivery from Emmerich. Metallkreissägeblatt Form BW D.275mm B.2,5mm HSS Bohrungs-D.40mm Z.180 TECWERK — 275 mm HSS circular saw blade with BW tooth form Metallkreissägeblatt Form BW D.275mm B.2,5mm HSS Bohrungs-D.40mm Z.180 TECWERK is a purpose-built metal-cutting saw blade designed for precise separation of iron and steel on industrial circular saw machines. HSS design for robust cutting Vapour-treated coating reduces welding BW bog tooth for fine, burr-free cuts 40 mm bore with auxiliary holes for mounting Consistent, high-quality cuts through HSS engineering The HSS construction ensures a high level of wear resistance and thermal stability during prolonged cutting cycles. With a 275 mm diameter and 180 teeth arranged in a BW tooth geometry, the blade offers a balance between cutting speed and surface finish, reducing rework on production runs. The tooth shape is optimised for low vibration and controlled chip formation, which means the circular cutting disc produces fewer burrs and more predictable kerf widths. This translates directly into improved throughput and less time spent on secondary operations. Less material build-up thanks to vapour-treated protection The vapour-treated coating acts as a protective layer that reduces the tendency for chips and material to adhere to the cutting edges. For applications in iron and steel, this surface treatment lowers friction and the risk of material welding onto the teeth during hot cutting or high-duty cycles. The result is extended tool life and more stable cutting tolerances over time, which supports predictable maintenance intervals and fewer unscheduled stops on the production line. Simple fitting and broad machine compatibility The blade features a 40 mm bore and a set of auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) for secure mounting and alignment. It is specified for use on common industrial saw brands such as Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines, ensuring a straightforward exchange with existing tooling setups. The available mounting pattern facilitates a concentric fit and safe torque transmission, contributing to operational safety and consistent cut quality. Efficient operation and straightforward upkeep With a tooth pitch of 5 mm, the cutting profile is tailored for fine, repeatable separations in metalworking contexts where surface integrity matters. The combination of BW bog tooth form and the vapour-treated surface reduces frictional heat and the risk of smearing, which in turn lowers the frequency of dressing or replacement. Routine checks for sharpness and correct mounting are recommended; when those small tasks are observed, the workpiece throughput benefits from steady performance and fewer interruptions. For precision metal cutting with TECWERK vapour-treated HSS technology, contact Metav Werkzeuge for expert advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814172NW Description: Metallkreissägeblatt Form BW D.275mm B.2,5mm HSS Bohrungs-D.40mm Z.180 TECWERK Manufacturer: TECWERK Facts Diameter: 275 mm Bore diameter: 40 mm Teeth: 180 Width: 2.5 mm Pitch: 5 mm Packaging unit: 1 Special features Material: HSS Coating: vapour-treated Tooth form: BW bog tooth with alternating chamfer Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Suitable for: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials can this saw blade cut? The blade is intended for iron and steel applications; its HSS construction and vapour-treated surface make it suitable for a wide range of ferrous workpieces. How does the vapour-treated coating help in daily use? The vapour-treated coating reduces material adhesion and friction, lowering the risk of welding on the teeth and helping to maintain cutting performance over longer runs. Are the mounting holes compatible with common machines? Yes, the 40 mm bore plus the auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) match standard mounting patterns for brands such as Eisele and Ulmia, facilitating straightforward installation. What is the effect of the BW tooth form on the cut finish? The BW bog tooth with alternating chamfer is designed for fine, burr-free cuts and stable chip evacuation, which improves surface finish and reduces secondary finishing. How often should the blade be checked or replaced? Inspection intervals depend on workload, but routine checks for sharpness, correct mounting and absence of material build-up will help to maximise service life of this TECWERK metal circular saw blade (SKU 2000814172NW). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund