Taking advantage of HSS construction and a vapour-treated surface, this circular saw blade delivers consistent cuts in iron and steel while reducing material weld-up; order the blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Metal Circular Saw Blade Form C – 315 mm, HSS, 160 teeth A TECWERK Metal Circular Saw Blade Form C designed for robust, high-precision cutting of iron and steel on stationary circular saw machines HSS construction for consistent edge retention Vapour-treated surface reduces material welding 315 mm diameter for heavy-duty metal cutting 40 mm bore with multiple auxiliary holes Built for precise metal cutting on production saws The blade is manufactured from HSS (high-speed steel), which provides increased wear resistance and maintains sharpness under continuous use. With a 315 mm diameter and 160 teeth, the tool is optimised for fine, repeatable cuts that reduce the need for secondary finishing. The combination of dense tooth count and HSS material results in a predictable cut quality and a longer effective service interval, supporting steady throughput in workshop and light industrial environments. Vapour-treated surface for fewer interruptions A vapour-treated finish is applied to protect the cutting edges against material adhesion during operation. This treatment reduces the tendency for steel particles to weld onto the teeth, which in turn lowers heat build-up and extends time between cleaning or regrinding cycles. Tooth form C (arc tooth with primary and secondary cutting edges) promotes smooth chip formation; the result is reduced rework and improved process reliability for ferrous materials. Secure mounting and machine compatibility for stable cuts The blade features a 40 mm bore with additional auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) to ensure secure attachment and correct alignment on compatible machines. This configuration supports stable running and concentricity on standard metal-cutting circular saw models such as Eisele, Ulmia, Trennjäger, Rekord and Ultra, making the blade suitable for workshops standardising on these systems. Proper mounting reduces vibration and improves tooth life. Efficient cutting across common ferrous applications Engineered specifically for iron and steel, the blade provides consistent performance in typical metalworking tasks where fine kerf control and reduced heat are priorities. The arc-shaped tooth geometry delivers controlled chip flow and predictable cutting forces, helping to preserve the material surface and minimise post-cut finishing. Where higher edge retention and resistance to welding are required, this specification offers a practical balance between precision and productivity. Discuss material compatibility and machine fitment with Metav Werkzeuge – call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm the blade’s suitability for specific production setups Technical data Article number: 2000814188NW Product: Metal circular saw blade Manufacturer: TECWERK Material: HSS Facts Diameter: 315 mm Width: 2.5 mm Bore diameter: 40 mm Teeth: 160 Pitch: 6 Special features Vapour-treated surface as protection against material welding Tooth form C: arc tooth with primary and secondary cutting edges Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is specified primarily for iron and steel workpieces and benefits from its HSS construction and vapour-treated surface when cutting ferrous materials. Which machines will accept the 40 mm bore and auxiliary holes? The blade mounts on saws that accept a 40 mm bore with auxiliary holes; it is described for fitment on Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines in the product data. How does the vapour treatment affect maintenance intervals? The vapour-treated surface reduces material adhesion and welding on the teeth, which typically extends periods between cleaning and regrinding compared with untreated blades. What advantage does the C tooth form provide? Tooth form C features an arc-shaped tooth with primary and secondary cutting edges that improves chip control and yields smoother cuts in ferrous metals. Is the blade suitable for heavy-duty, continuous production use? With HSS construction and a dense tooth count, the blade is designed to deliver stable cutting performance in demanding workshop applications where consistent results are required. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co construction and vaporised coating for longer tool life and reduced material build-up, combined with a fine-tooth geometry for consistent surface quality; order directly via Metav Werkzeuge or request specialist advice from our consultants. TECWERK Metal circular saw blade – 315 mm, HSS‑Co, 160 teeth The TECWERK metal circular saw blade is engineered for precision cutting of stainless and high-strength steels on industrial circular saws, offering a narrow kerf and anti-weld surface treatment for demanding workshop applications 315 mm diameter, 2.5 mm kerf HSS‑Co for extended life Vaporised coating reduces material welding 160 teeth for fine, consistent cuts High-performance cutting for stainless and high‑strength steels The blade combines HSS‑Co construction with a vaporised coating to deliver sustained cutting performance in aggressive applications. HSS‑Co (cobalt-alloyed high-speed steel) increases red-hardness and wear resistance compared with standard high-speed steels, which translates into longer service intervals and a lower cost-per-cut. The vaporised coating acts as an anti‑weld protection, reducing adhesion of stainless workpiece material during cutting and preserving the cutting edges. These technical choices support a predictable production flow and reduce unscheduled stoppages in metalworking environments. Fine-tooth geometry for consistent surface quality Equipped with 160 teeth and a C-tooth geometry, the blade is tuned for smooth finishes and minimal burr formation on stainless and tough alloys. The C-tooth profile provides a controlled shearing action with defined cutting and secondary edges, which helps to limit surface deformation and heat concentration. As a consequence, there is less rework and improved dimensional consistency of cut parts, making the blade suitable for serial production where surface quality and tight tolerances matter. The narrow 2.5 mm kerf further reduces material loss and power demand per cut. Practical mounting and machine compatibility to keep workshops productive The blade features a 32 mm bore and multiple auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) for secure and versatile mounting on a range of industrial circular saw frames. Compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines simplifies procurement and spare-part planning for mixed‑fleet workshops. Robust mounting and the blade’s wear-resistant construction contribute directly to reduced downtime and consistent throughput, ensuring operational reliability across shift work and continuous production cycles. Contact Metav Werkzeuge for tailored technical advice and an individual supply offer for the TECWERK metal circular saw blade (SKU 2000814218NW) — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 2000814218NW Manufacturer: TECWERK Product type: Metal circular saw blade Dimensions & numbers Diameter: 315 mm Bore diameter: 32 mm Width / kerf: 2.5 mm Teeth: 160 Division: 6 Materials & features Material: HSS‑Co Coating: vaporised Tooth form: C Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas machines Function: protection against material welding; narrow kerf for reduced material loss FAQ Which materials is this blade intended for? The TECWERK metal circular saw blade is designed primarily for stainless steel and other high‑strength steels, benefitting from the HSS‑Co substrate and vaporised coating to reduce weld‑up and extend life. How does the vaporised coating improve performance? The vaporised coating on the blade reduces adhesion of workpiece material during cutting, providing anti‑weld protection that helps maintain edge sharpness and consistent cutting quality. What does the C‑tooth geometry mean for the finish? The C‑tooth profile with its primary and secondary cutting edges yields a shearing action that produces a finer surface and fewer burrs, particularly with the high tooth count of 160. Which machines can accept this blade? The blade is supplied with a 32 mm bore and multiple auxiliary holes to suit mounting on common industrial circular saws, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models. How is the blade mounted to a saw frame? Mounting uses the central 32 mm bore together with the specified auxiliary hole pattern (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) to ensure secure attachment and alignment. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Efficient cutting performance, extended service life and secure mounting come together in this TECWERK HSS circular saw blade with a 315 mm diameter, vapour‑treated coating and 120 fine teeth — ideal for precise, burr‑reduced cuts in iron and steel; order the blade directly via Metav Werkzeuge or ask our consultants for application advice. TECWERK metal circular saw blade Form C — 315 mm, HSS, 120 teeth A TECWERK metal circular saw blade Form C engineered for high-precision cutting of iron and steel in industrial metal-cutting saws 315 mm diameter for industrial metal cutting HSS body for durable, high-performance cutting Vapour‑treated coating reduces material welding 120 C‑form teeth for fine, burr‑reduced cuts Faster, cleaner cuts for metalworking operations The HSS construction combined with a 2.5 mm kerf and 120 fine teeth delivers a balance of cutting speed and surface quality. High-speed steel retains hardness at elevated temperatures, which means more consistent edge holding during prolonged runs. The slim kerf reduces material waste and lowers cutting forces, so sawing cycles become more energy-efficient while producing smoother edges and less secondary finishing. This translates into measurable productivity gains and reduced rework in serial production. Less welding, longer blade life A vapour‑treated coating acts as a protective layer against material build-up on the cutting edge, improving chip evacuation and reducing thermal adhesion. The C‑form tooth (arc tooth with front and back cutting edges) provides controlled chip formation and reliable tooth engagement, which lowers the risk of tooth breakage under demanding conditions. Together these features extend service intervals and make maintenance cycles more predictable—advantages that support cost-effective operation in busy workshops. Reliable fit and stable mounting for precision sawing The blade is supplied with a 40 mm central bore and dedicated auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) for positive location and secure mounting, ensuring true running and minimal vibration. Compatibility is specified for common industrial saw systems such as Eisele, Ulmia, Trennjäger, Rekord and Ultra machines, enabling straightforward integration into existing equipment fleets. Correct mounting and balancing reduce wear on saw bearings and improve cut repeatability, which is crucial for quality‑conscious metalworking shops. Contact Metav Werkzeuge for personalised technical advice and reliable supply of TECWERK metal circular saw blades — Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; info@metav-werkzeuge.com; +49 2822 7131930 Technical data SKU: 2000814184NW Label: Metallkreissägeblatt Form C D.315mm B.2,5mm HSS Bohrungs-D.40mm Z.120 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Data Diameter: 315 mm Width / kerf: 2.5 mm Teeth: 120 Bore diameter: 40 mm Pitch / division: 8 Tooth form: C Special features / materials Material: HSS Coating: vapour‑treated (dampfbehandelt) Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Application: for iron and steel materials Compatibility: Eisele, Ulmia, Trennjäger, Rekord, Ultra saw machines FAQ What materials can this circular saw blade cut? This TECWERK metal circular saw blade is designed for cutting iron and steel materials, as indicated by the HSS material and the specified application in the product data. How does the vapour‑treated coating help in practice? The vapour‑treated coating reduces thermal adhesion and material build-up on the teeth, improving chip evacuation and extending the blade's effective service life. Which machine arbors is the blade compatible with? The blade has a 40 mm centre bore and auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) for secure mounting and is specified for Eisele, Ulmia, Trennjäger, Rekord and Ultra metal-cutting saws. What cutting quality can be expected with 120 teeth and C‑form geometry? The 120 fine teeth in C‑form provide controlled chip formation and reduced burr, producing cleaner cuts that minimise finishing work and improve dimensional accuracy. Is this blade suitable for high-speed operation? Constructed from HSS and vapour‑treated for reduced welding, the blade is suited to demanding industrial cutting where sustained cutting performance is required; safe operating speeds follow the machine and material recommendations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS construction, a vapour-treated surface and a 315 mm diameter to achieve durable, weld-resistant cutting in iron and steel; order the blade directly via Metav Werkzeuge or consult our advisors for machine-specific compatibility. TECWERK 315 mm metal circular saw blade – HSS, C-tooth, 120 teeth The TECWERK 315 mm metal circular saw blade is a heavy‑duty cutting disc designed for industrial circular saw machines, optimised for reliable cutting of iron and steel materials. HSS construction for durable cutting Vapour-treated coating prevents weld-up 315 mm diameter with 32 mm bore 120 C-shaped teeth for smooth metal cuts High durability and reduced weld‑up for uninterrupted production Made from HSS, this blade combines hardness and toughness for extended service life under industrial loads. The vapour-treated surface acts as a protective layer against material adhesion and reduces the risk of tooth welding when cutting sticky stainless or low-alloy steels, which in turn decreases cleaning intervals and unscheduled downtime. The robust geometry supports sustained cut quality, so workshop throughput is more consistent and tool change intervals are extended. Precision tooth geometry for cleaner edges and less rework The C-tooth profile with its arched tooth form and dedicated lead and trail cutting edges produces a controlled chip formation and a fine cut face. With 120 teeth the feed can be set for a balance between surface finish and cutting rate; the high tooth count lowers burr formation and minimises subsequent deburring operations. The result is improved part quality straight from the saw, reducing finishing time and cost per component. Stable kerf and vibration control for better machine interaction A cutting width of 2.5 mm maintains a slim kerf to limit material loss while retaining stability across the cut. The 32 mm bore and the specified auxiliary hole pattern allow a secure fit and help to damp vibration when mounted, contributing to quieter running and longer bearing life on the saw spindle. These attributes support predictable performance on compatible industrial sawing machines, improving both safety and repeatability. Compatibility, workshop benefits and expert backing The blade is prepared for use on common industrial circular saw brands and models and includes multiple auxiliary holes to match different adapters and flanges. This adaptability, together with the material suitability for iron and steel, makes the blade a practical choice for metal workshops aiming to reduce tooling variance. For detailed machine matching or cutting parameter advice, Metav’s technical consultants are available to provide tailored recommendations, reflecting the company’s commitment to accessible precision and reliable supply. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK blade into the production line and to confirm fitment options; Metav Werkzeuge in Emmerich provides direct supply and expert consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000814205NW Label: Metallkreissägeblatt Form C D.315mm B.2,5mm HSS Bohrungs-D.32mm Z.120 TECWERK Manufacturer: TECWERK Facts Diameter: 315 mm Bore diameter: 32 mm Width: 2.5 mm Teeth: 120 Pitch: 8 Packaging unit: 1 Special features Material: HSS Coating: vapour-treated Tooth form: C-tooth with lead and trailing edges Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Suited for iron and steel materials Compatible with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials can this blade cut effectively? The TECWERK 315 mm metal circular saw blade is designed for cutting iron and steel, with the HSS body and vapour-treated surface helping to prevent material adhesion during operation. How does the vapour-treated coating help in practice? The vapour-treated finish on the blade reduces the tendency for material to weld to the teeth, improving cut consistency and reducing downtime for cleaning when using the TECWERK metal circular saw blade. Which machines will the blade fit? The blade’s 32 mm bore and auxiliary hole pattern allow mounting on a range of industrial circular saws; common compatible brands include Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas. How does the tooth count affect cutting? With 120 teeth, the blade gives a finer cut and reduced burr formation compared with coarse-tooth discs, trading a slightly lower feed rate for improved surface quality and less rework. Can the blade be used for stainless steel? The construction and coating improve performance on sticky or alloyed steels, but final selection should consider specific stainless grades and cutting parameters; consult Metav Werkzeuge for advice. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of reliable, fine-cut performance combined with anti-weld protection and robust HSS construction for consistent production results; order the metal circular saw blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK metal circular saw blade BW – 315 mm, HSS, vapour-treated The TECWERK metal circular saw blade engineered for precise cutting of iron and steel on industry circular saw machines High-speed steel (HSS) core for durability Vapour-treated coating prevents material welding 315 mm diameter, 2.5 mm kerf for precise cuts 250 fine teeth in BW curved tooth form Consistent precision for industrial metalworking The 315 mm diameter and narrow 2.5 mm kerf combine to reduce material loss while delivering a clean edge on ferrous materials. With 250 teeth arranged in a BW curved tooth geometry, the blade produces a fine, low-burr finish that cuts down on rework and secondary machining. The high tooth count and narrow cut are particularly suitable where surface quality and tight tolerances matter, enabling stable throughput and predictable cycle times in production environments. Durable construction that minimises downtime Constructed from HSS and treated to resist material buildup, the blade is designed for sustained performance under demanding conditions. The vapour-treated surface acts as a protective layer against material welding on the teeth, which in turn extends service life and reduces the frequency of blade changes. This reliability lowers unplanned stops and supports a smoother workflow on busy shop floors, delivering measurable gains in machine availability and operator confidence. Simple mounting and broad machine compatibility The central 32 mm bore and the pattern of auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) allow straightforward fitting to a wide range of circular saw machines. Compatibility with leading manufacturers such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas ensures easy replacement without adapter modification. The standardised hole pattern promotes correct alignment and safe clamping, which helps maintain cut quality and reduces setup time between jobs. Practical advantages in workshop applications Designed specifically for cutting iron and steel, the blade delivers a combination of precision and robustness for everyday workshop tasks and industrial batch production. The fine tooth form reduces chatter and vibration on stable machines, improving operator ergonomics and part finish. For fabricators and job-shop environments the result is fewer finishing operations and a predictable cutting behaviour that supports consistent quoting and delivery times. Choose the TECWERK HSS, vapour-treated circular saw blade for dependable anti-weld performance and request tailored advice from Metav Werkzeuge for seamless integration into existing saw lines Technical Data Article number: 2000814208NW Label: Metallkreissägeblatt Form BW D.315mm B.2,5mm HSS Bohrungs-D.32mm Z.250 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Packaging unit: 1 Facts Diameter: 315 mm Width / kerf: 2.5 mm Bore diameter: 32 mm Teeth: 250 Pitch / division: 4 Tooth form: BW Special features Material: HSS Coating: vapour-treated (anti-weld) Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Suitable for: iron and steel Compatible with: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is specified for cutting iron and steel; its HSS construction and vapour-treated surface reduce material welding during operation. How does the vapour-treated coating help in daily use? The vapour-treated layer on the TECWERK HSS blade prevents material adhesion on the teeth, which lowers the need for frequent cleaning and helps maintain cutting accuracy over longer runs. Can the blade be fitted to different circular saw brands? Yes. The 32 mm bore and multiple auxiliary holes enable mounting on many machines; compatibility includes Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models. What benefits does the BW curved tooth form provide? The BW curved tooth with alternating bevel delivers a fine finish and reduced burr formation, improving part quality and decreasing the need for secondary finishing operations. How many teeth does the blade have and what does that mean for the cut? With 250 teeth, the blade offers a fine, smooth cut that is ideal for applications requiring good surface quality and minimal post-processing. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of excellent cut quality and very long service life for consistent, low‑downtime production; order the Jepson carbide‑tipped 320 mm metal circular saw blade directly via Metav Werkzeuge or consult our specialists for compatibility advice. Jepson 320 mm Carbide‑Tipped Metal Circular Saw Blade — 84 teeth, 25.4 mm bore A Jepson 320 mm carbide‑tipped metal circular saw blade engineered for high‑precision cutting of sandwich panels, trapezoidal sheet and a wide range of metallic and composite materials. Carbide-tipped for extended tool life Excellent surface finish and precision Noise-reduced for quieter operation Resharpenable to extend service life Productivity gains from precise geometry and durable tips The combination of a 2.2 mm blade thickness and 84 teeth yields a fine kerf that reduces material waste while maintaining high feed stability. The carbide‑tipped teeth resist wear under continuous use, giving a very long service life compared with conventional tooth geometries. This directly translates into fewer blade changes, reduced machine downtime and more predictable process planning in busy workshops and production lines. The fine tooth count supports a superior surface finish, so secondary finishing steps can often be reduced. Versatile material compatibility for mixed production runs This blade is optimised for a wide range of applications: sandwich panels, trapezoidal sheet, cable ducts, steel pipes, ferrous and non‑ferrous metals, and various composite materials. Its tooth geometry and carbide grade deliver consistent cutting performance across these substrates, enabling mixed runs without frequent tool swaps. Compatibility with standard arbors is ensured by the 25.4 mm bore, simplifying setup for typical circular saw spindles used in metal‑working environments. Design elements that improve shop efficiency and operator comfort A noise‑reduced profile and optimised tooth spacing contribute to quieter operation and lower vibration, improving operator comfort and prolonging machine life. The carbide tips are resharpenable, allowing maintenance teams to restore cutting performance and extend overall blade lifetime — a cost‑efficient approach for workshops that value long‑term tool economy. The blade’s narrow kerf also reduces cutting forces, which can improve blade stability and reduce energy consumption per cut. Integration and practical considerations for industrial use Designed for use with compatible circular saw systems — notably the SHDC 8320 series — the blade supports standard mounting procedures and predictable process parameters. While specialised cutting data depend on material thickness and machine setup, the blade’s construction focuses on delivering excellent cut quality and repeatable results in production environments. For one‑off or specialist cuts, the robust carbide tips and resharpenable design help maintain consistent performance through numerous regrinds. For reliable high‑performance cutting with proven durability, order the Jepson 320 mm carbide‑tipped circular saw blade via Metav Werkzeuge for fast delivery from Emmerich, or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for application advice Technical data Article number: 4000894926NW Product name: Jepson 320 mm carbide‑tipped circular saw blade, 84 teeth Manufacturer: Jepson Power GmbH Facts Diameter: 320 mm Blade thickness: 2.2 mm Bore diameter: 25.4 mm Tooth count: 84 Special features Carbide‑tipped Compatible with SHDC 8320 Optimal for sandwich panels, trapezoidal sheet, cable ducts, steel pipes, ferrous and non‑ferrous metals, composites Very long service life Resharpenable Noise‑reduced design FAQ What materials can this blade cut effectively? The Jepson 320 mm carbide‑tipped circular saw blade is suitable for sandwich panels, trapezoidal sheet, cable ducts, steel pipes, ferrous and non‑ferrous metals and a variety of composite materials. Is the blade compatible with standard saw arbors? Yes, the blade’s 25.4 mm bore fits common arbor sizes for metal‑working circular saws; compatibility with specific machines such as the SHDC 8320 is indicated. Can the carbide tips be resharpened? Yes, the carbide tips are resharpenable, allowing maintenance to restore tooth geometry and extend the blade’s usable life. How does the tooth count affect cutting quality? The 84 teeth configuration provides a fine finish and reduced burr formation, making it well suited to thin sheets and composite surfaces where surface quality is important. Does the blade reduce noise during operation? The blade features a noise‑reduced design that lowers operating noise and vibration compared with many standard blades, improving operator comfort. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a HSS construction and a vapour-treated surface to achieve fine, weld‑resistant cuts in iron and steel; the compact 3.0 mm kerf and 140 teeth combine precision with low material loss. Order the blade directly via Metav Werkzeuge or ask the consultants for machine-specific advice. TECWERK 350 mm metal circular saw blade — HSS, 140 teeth, Form C The TECWERK 350 mm metal circular saw blade (Form C) is designed for precision cutting of iron and steel in common horizontal and vertical circular saw machines HSS construction for long tool life Vapour-treated surface to reduce weld-up 350 mm diameter for common saw frames 140 fine teeth for smooth cuts High-precision cutting performance for iron and steel The blade, supplied as a HSS tool with a vapour-treated surface, delivers consistently smooth severance when cutting iron and steel. The dense tooth count of 140 teeth produces reduced burr and a finer finish compared with coarse blades, which is beneficial for applications where post‑processing must be minimised. The Form C tooth geometry (bow tooth with leading and trailing cutters) helps distribute cutting forces evenly, improving cut quality and extending service intervals. Robust design that reduces downtime and weld-up Constructed from HSS, the blade offers the hardness and heat resistance needed for frequent use on ferrous materials. The vapour treatment acts as a protective layer against material adhesion during cutting, lowering the risk of weld‑up on the gullets and teeth and thereby maintaining cutting efficiency for longer. The 3.0 mm kerf balances rigidity and material removal: enough stiffness for dimensionally stable cuts while keeping swarf volumes manageable. Machine compatibility and safe mounting for rapid changeovers Compatibility is ensured by the 40 mm bore and the specified side hole pattern (2 x 8/55 mm; 4 x 12/64 mm), allowing secure mounting on a range of saw frames. The blade is suitable for Eisele, Ulmia, Trennjäger, Rekord and Ultra saw machines, providing flexible use across many workshops. The Form C tooth arrangement supports reliable chip evacuation and consistent feed behaviour, aiding reproducible cycle times on production lines. The product SKU 2000814185NW identifies this exact configuration for procurement and spare‑parts tracking. Practical selection advice for workshop managers and buyers For repetitive metal‑cutting tasks where surface quality and throughput matter, this blade represents a balance of precision and durability. The HSS alloy resists thermal softening at higher cutting speeds, while the vapour treatment reduces maintenance intervals related to tooth cleaning. Metav’s stock depth and expertise make specification and delivery straightforward, aiding planning for continuous production without unnecessary supplier complexity. For demanding iron and steel sawing tasks choose the TECWERK HSS 350 mm blade (Form C) and contact Metav Werkzeuge for tailored machine compatibility advice and prompt supply from Emmerich Technical data Article number: 2000814185NW Product label: Metallkreissägeblatt Form C D.350mm B.3,0mm HSS Bohrungs‑D.40mm Z.140 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Facts Diameter: 350 mm Width (kerf): 3.0 mm Teeth: 140 Tooth pitch: 8 Bore diameter: 40 mm Side holes: 2 x 8/55 mm; 4 x 12/64 mm Special features Material: HSS Coating: vapourised (vapour‑treated) Tooth form C: bow tooth with leading and trailing cutters Protection against material weld‑up Suitable for iron and steel Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra machines FAQ What materials can this blade cut? The TECWERK 350 mm metal circular saw blade is designed primarily for iron and steel cutting applications and performs well where a fine surface finish is required. How does the vapour treatment benefit cutting performance? The vapour‑treated surface reduces adhesion of hot material to the gullets and teeth, decreasing weld‑up and preserving the cutting geometry for longer on the TECWERK blade. Which machines are compatible with the blade? Compatibility includes common industrial circular saw frames such as Eisele, Ulmia, Trennjäger, Rekord and Ultra models; the 40 mm bore and side‑hole pattern enable secure mounting. What does Form C tooth geometry mean for the cut? Form C describes a bow‑shaped tooth with lead and trailing cutting edges that improves chip formation and produces a smoother cut while reducing the risk of tooth damage. How is the blade identified for ordering or replacement? Use article number 2000814185NW and the product label (TECWERK 350 mm HSS blade, 140 teeth, Form C) to ensure the exact configuration is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS‑Co construction combined with a vapour‑treated anti‑weld coating for consistently clean cuts in stainless and high‑strength steels; the 350 mm diameter and 110 teeth deliver a fine finish while the 32 mm bore and auxiliary holes ensure secure mounting and compatibility with common circular saw machines. Order this blade directly via Metav Werkzeuge or ask our consultants for tailored advice. TECWERK metal circular saw blade Form C — 350 mm, HSS‑Co, 110 teeth The metal circular saw blade Form C is engineered for precision cutting of stainless and other high‑strength steels on compatible circular saw machines HSS‑Co for high wear resistance Vapour‑treated anti‑weld coating 110 teeth for fine cutting Compatible with major circular saw machines Precision and longevity for demanding metalworking Made from HSS‑Co, this circular blade offers high wear resistance and thermal stability during prolonged cutting cycles. The 350 mm diameter combined with a 3.0 mm kerf and a dense tooth layout produces a consistent edge quality and reduced burr formation, which translates into less rework and higher throughput. The material choice supports repeatable performance when machining tough alloys, giving workshops a reliable tool for everyday production. Reduced build‑up and easier maintenance The vapour‑treated coating functions as an anti‑weld protection, significantly lowering the tendency for material to adhere to the teeth when cutting stainless and sticky alloys. This coating reduces cleaning intervals and blade dressing, thereby cutting downtime and maintenance costs. In practice, fewer interruptions for de‑burring or tooth cleaning mean smoother job sequencing and more predictable production speeds. Optimised tooth geometry for cleaner chips The tooth form C (arched tooth with raker pre‑ and post‑cutters) is designed to promote controlled chip formation and efficient chip evacuation. When paired with the dense 110‑tooth arrangement, the result is a fine‑cut surface finish and reduced vibration. This geometry is particularly effective when working with stainless steel and other high‑strength steels, where chip control and heat management are crucial to avoid surface defects. Secure mounting and broad machine compatibility Mounting is simplified by the 32 mm bore plus multiple auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm), ensuring stable seating and compatibility with a range of circular saw systems. The blade is specified for use on Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas circular saw machines, which facilitates integration into existing shop setups and helps maintain concentricity and run‑out control for precise cuts. For a reliable supply of TECWERK HSS‑Co blades with vapour‑treated protection and assistance selecting the correct variant for individual applications, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s team will advise on compatibility and delivery from their European stock Technical data Article number: 2000814225NW Product: metal circular saw blade Form C Manufacturer: TECWERK Facts Diameter: 350 mm Blade width / kerf: 3.0 mm Teeth: 110 Bore diameter: 32 mm Pitch (teilung): 10 Tooth type: C Special features Material: HSS‑Co Coating: vapour‑treated Function: protection against material weld‑on (anti‑weld) Application: stainless steel and other high‑strength steels Tooth geometry: arch tooth with pre‑ and post‑cutter Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Compatibility: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials can this blade cut effectively? The blade is designed for stainless steel and other high‑strength steels; its HSS‑Co composition and vapour‑treated coating reduce welding of material to the teeth during cutting. How does the vapour‑treated coating improve performance? The vapour‑treated surface acts as anti‑weld protection, reducing build‑up on the teeth, which leads to longer intervals between cleaning and more consistent cut quality. Which machines is the blade compatible with? This blade fits common circular saw systems, specifically noted for Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas saws, supported by the 32 mm bore and multiple auxiliary holes for secure mounting. What does tooth form C mean for the finished edge? Tooth form C is an arched configuration with raker pre‑ and post‑cutters that promotes controlled chip formation and a finer surface finish, particularly beneficial when cutting tougher alloys. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust HSS construction and vapour-treated surface for fewer weld-up interruptions, combined with a fine 180-tooth geometry for precise cuts; order the blade directly via Metav Werkzeuge or consult the sales team for application advice. Metal circular saw blade Form C, 350 mm — 180 teeth, HSS, TECWERK A Metal circular saw blade designed for precise cutting of iron and steel, featuring a 350 mm diameter, 3.0 mm plate thickness and C-shaped curved teeth for pre- and finish-cut operations. 350 mm diameter, 180 teeth HSS construction, vapour-treated coating 32 mm bore with multiple auxiliary holes Curved C-tooth for pre- and finish cuts High-performance cutting for steelwork that demands repeatable precision The 350 mm circular blade in HSS offers a balance of wear resistance and edge stability that supports continuous metal-cutting tasks. With 180 teeth and a narrow 3.0 mm plate, the geometry reduces burr formation and produces a consistent cut face, which shortens downstream finishing. Vapour treatment of the tooth surfaces lowers the tendency for material to weld onto the cutting edge, maintaining cutting performance over longer runs while helping to preserve the original tooth profile. Secure mounting and low vibration for improved runout control A central 32 mm bore combined with a pattern of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) ensures precise seating and compatibility with a wide range of machines. The dedicated hole pattern supports even clamping pressure and stabilises rotation, reducing chatter and improving cut quality. Designed for common circular saw frames, the blade fits machines from established manufacturers, enabling straightforward replacement and predictable behaviour in production setups. Coating and tooth geometry that prevent material build-up The vapour-treated surface serves as a protective layer against material adhesion during cutting. This treatment reduces friction at the cutting zone and mitigates heat-related adhesion on ferrous surfaces, which in turn lowers the frequency of manual cleaning and tooth dressing. The curved C-tooth profile, with defined pre- and post-cutting edges, assists chip evacuation and promotes smoother engagement when slicing through dense iron and steel grades. Application guidance and material suitability for industrial use Constructed from HSS, the blade is optimised for iron and steel applications where edge retention and toughness are required. Its tooth count and form make the blade particularly suitable for fine-section cutting where minimal burr and clean edges are priorities. For users integrating the blade into production lines, the combination of tooth geometry and anti-weld treatment contributes to longer intervals between blade maintenance and helps sustain throughput in demanding shop-floor conditions. Contact Metav Werkzeuge for tailored advice on TECWERK HSS blades and secure delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000814210NW Product: Metal circular saw blade, Form C, TECWERK Brand: TECWERK Material: HSS Dimensions & counts Diameter: 350 mm Plate width: 3.0 mm Teeth: 180 Bore diameter: 32 mm Pitch: 6 Special features Coating: vapour-treated (protection against material weld-up) Tooth form: C (curved tooth with pre- and post-cutting edges) Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Compatibility: for Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this blade designed to cut? The TECWERK metal circular saw blade (SKU 2000814210NW) is designed primarily for iron and steel materials and is optimised for applications where a fine, low-burr finish is required. How does the vapour-treated coating benefit cutting performance? The vapour-treated surface on the TECWERK blade reduces adhesion of cut material to the teeth, lowering friction and heat at the cutting zone and helping to maintain a stable cutting edge for longer sequences. What is the mounting specification for machine compatibility? The blade uses a central 32 mm bore and a set of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to ensure secure seating and compatibility with standard circular saw arbors and clamps. Why choose an HSS blade with a high tooth count like 180? An HSS construction combined with 180 teeth produces a refined kerf and improved surface quality, making the blade suitable for precision cuts and situations where minimal post-processing is important. Which machine manufacturers are supported by this blade’s design? The blade is specified for use with machines from manufacturers such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, offering broad compatibility for common circular saw setups. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vapour-treated HSS construction and a 220-tooth BW arc design to achieve fine, consistent cuts in ferrous materials; order the blade directly via Metav Werkzeuge or consult the technical team for machine-specific fitting. Metal circular saw blade, BW form, 350 mm, HSS – TECWERK (220 teeth, 32 mm bore) A metal circular saw blade BW form engineered for precision cutting of iron and steel on industrial circular sawing machines Vapour-treated surface reduces material welding 350 mm diameter with 32 mm bore and auxiliary holes BW arc tooth form with 220 teeth for fine cuts 3.0 mm kerf for stable, precise metal cutting Reliable, high-precision cutting for ferrous materials The HSS construction offers high wear resistance and thermal stability compared with standard tool steels, making this blade suitable for continuous use in production environments. The blade’s 220 teeth and BW arc tooth geometry produce a fine cutting action that reduces burring and the need for secondary finishing. In practice, the combination of a high tooth count and the arc tooth form delivers a smoother surface on cut edges, helping to shorten post-cut processing times and maintain throughput in busy workshops. Coating technology that reduces sticking and downtime A vapour-treated surface serves as a protective measure against material adhesion during cutting; this treatment reduces the tendency for weld-up on the tooth flanks when cutting steel and iron. By limiting build-up on the cutting edges, the coating helps to preserve the original tooth geometry for longer, which maintains cutting efficiency and reduces the frequency of dressing or blade replacement. For operations where sticking and thermal transfer impair productivity, this treatment supports more reliable shift-to-shift performance. Fit and compatibility with common saw brands With a 32 mm bore and a pattern of auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm), the blade matches mounting requirements on a range of industrial circular saws. Compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas machines is explicitly supported, simplifying integration into existing production lines. The specific hole pattern ensures secure seating and balanced rotation, which is essential for safety and for maintaining cut quality at higher feed rates. Stable cut geometry and handling benefits The 3.0 mm kerf provides a balance between cutting stability and material removal; the narrower kerf reduces material waste while maintaining sufficient blade rigidity for straight, vibration-free cuts. The BW tooth form — an arc-shaped tooth with alternating bevels — helps channel swarf away from the cutting zone and supports a continuous chip formation that is easier to manage in banding and conveying systems. These features lower the risk of unwanted thermal distortion and help sustain part tolerances during longer runs. For a tailored recommendation based on machine model and application, contact Metav Werkzeuge for technical advice and secure the correct blade configuration for reliable production performance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000814209NW Product type: Metal circular saw blade Diameter: 350 mm Bore diameter: 32 mm Kerf/width: 3.0 mm Teeth: 220 Tooth form: BW Material: HSS Coating: vapour-treated Facts Division / pitch: 5 Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Tooth style: arc tooth with alternating bevel Suitable for: iron and steel materials Special features Vapour-treated surface to reduce material welding Designed for Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas machines High tooth count for fine finish and reduced secondary processing Stable 3.0 mm kerf for precision and reduced waste FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade with HSS construction is intended for cutting iron and steel materials, providing fine finishes and consistent performance. How does the vapour-treated coating help in production? A vapour-treated surface on the blade reduces material adhesion and weld-up on the teeth, which helps to maintain cutting performance and extends service intervals for the TECWERK 350 mm blade. Which machines will the blade fit? The blade’s 32 mm bore and auxiliary hole pattern match mounting requirements for Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas circular saw machines. What does BW tooth form mean in practice? BW denotes an arc-shaped tooth with alternating bevels; this configuration promotes fine cuts, reduced burring and consistent chip evacuation when cutting ferrous materials. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction, a vaporised anti‑weld coating and the fine BW tooth form for clean, repeatable cuts in stainless and high‑strength steels; order directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Metal Circular Saw Blade — 350 mm, HSS‑Co, BW tooth, 220T The TECWERK metal circular saw blade is designed for precision cutting of stainless and other high‑strength steels on industrial circular sawing machines, offering reduced material adhesion and consistent edge quality. High‑speed HSS‑Co construction Vapourised anti‑weld coating 350 mm diameter, 32 mm bore 220 fine teeth, BW tooth form Precision cutting performance for demanding steels The HSS‑Co composition (cobalt‑alloyed high‑speed steel) provides a robust cutting edge with improved hot‑hardness compared with standard high‑speed grades; this results in a stable cutting action when processing stainless and other high‑strength steels. The combination of a fine tooth count and the BW tooth form (arc tooth with alternating bevel) yields smooth chip removal and reduced burr formation, which helps to maintain part tolerances and minimise secondary finishing. For users unfamiliar with the term, BW denotes a tooth geometry optimised for thin‑kerf, high‑quality metal cutting, delivering clean kerf surfaces and predictable feed behaviour. Less adhesion, longer productive runs A vaporised coating on the blade acts as a protective barrier against material build‑up and welding of chips to the cutting edge. In practice, this reduces interruptions for cleaning and preserves the rake geometry for longer periods, contributing to steadier cut quality over extended runs. When paired with the cobalt alloy body, the coating supports a consistent surface finish on stainless steel workpieces and other tough alloys. For workshops seeking reduced downtime and fewer blade changes, this treatment translates into improved process reliability and a lower frequency of maintenance interventions. Machine compatibility and secure mounting The blade features a 32 mm central bore and an array of auxiliary holes (2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm) to suit clamping arrangements used on many industrial circular saw machines. It is specified for use on brands such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, allowing straightforward retrofitting in production lines and bespoke sawing cells. The 3.0 mm blade width ensures an efficient balance between rigidity and kerf size, helping to reduce material waste while maintaining the mechanical stability required for precise cuts. Practical considerations for everyday workshop use This cutting tool is supplied as a single unit and is optimised for metalworking environments where stainless and high‑strength steels are processed. The fine tooth count (220) and a 5 mm pitch support tight surface tolerances and minimal edge deformation. Operators should verify machine speeds and feeds appropriate for HSS‑Co tooling and the chosen workpiece material; correct operating parameters will ensure the coating and alloy deliver their intended benefits. Routine inspection for wear and periodic cleaning of the tooth gullets will sustain cutting performance and reduce the likelihood of thermal or mechanical damage. For availability, exact machine compatibility checks or tailored cutting parameter advice for the TECWERK HSS‑Co 350 mm metal circular saw blade (SKU 2000814223NW), please contact Metav Werkzeuge—info@metav-werkzeuge.com | +49 2822 7131930 — our specialists will assist with application guidance and supply options Technical data Article number: 2000814223NW Label: Metallkreissägeblatt Form BW D.350mm B.3,0mm HSS‑Co Bohr.‑D.32mm Z.220 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Facts Diameter: 350 mm Bore diameter: 32 mm Blade width: 3.0 mm Teeth: 220 Pitch: 5 Special features Material: HSS‑Co (cobalt‑alloyed high‑speed steel) Coating: vapourised (anti‑weld protection) Tooth form: BW (arc tooth with alternating bevel) Auxiliary holes: 2 × 11/63 mm; 4 × 9/50 mm; 2 × 8/45 mm Packaging unit: 1 Recommended for: stainless steel and other high‑strength steels Compatible with: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular saw machines FAQ What materials is this blade suitable for? The TECWERK metal circular saw blade is intended for stainless steel and other high‑strength steels; the HSS‑Co alloy and vapourised coating reduce adhesion and support clean cuts in these materials. Which machines will accept the 32 mm bore and mounting pattern? The blade’s 32 mm bore and auxiliary hole pattern are compatible with many industrial circular saws, including models from Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, allowing direct mounting in standard machine fixtures. How does the vapourised coating improve cutting performance? The vapourised coating acts as a protective layer to reduce material welding to the teeth during cutting; combined with the HSS‑Co substrate, it helps preserve edge geometry and extend effective run lengths. Can the blade be resharpened, and what maintenance is recommended? The HSS‑Co construction permits professional resharpening; regular cleaning of gullets and inspection for wear are recommended to maintain the blade’s cutting geometry and finish. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from a durable combination of HSS construction, a vapour-treated coating and the fine BW tooth geometry for reliable, burr-free separation of iron and steel; order the blade directly via Metav Werkzeuge or consult our specialists for machine-specific advice. Metal Circular Saw Blade, Form BW – 350 mm, HSS, 280 Teeth (TECWERK) The Metal Circular Saw Blade, Form BW is a high-performance cutting tool designed for precision separation of iron and steel on industrial circular sawing machines. HSS construction with vapour-treated coating 350 mm diameter with 3.0 mm body width BW curved teeth with alternate bevel 40 mm bore with multiple auxiliary holes Outstanding accuracy for demanding steel and iron work Made from HSS, this saw blade delivers consistent cutting geometry under load, ensuring repeatable results in series production and workshop environments. The combination of a 350 mm nominal diameter and a 3.0 mm body thickness provides a balance between stiffness and minimal kerf loss, which helps to reduce material waste while maintaining straight, true cuts. The 280 teeth count and the BW tooth form (curved tooth with alternate bevel) produce a fine finish and low burr formation, reducing rework and downstream grinding. For manufacturers and precision shops, this means fewer rejects and better throughput without sacrificing edge quality. Reduced material build-up and longer service intervals A vapour-treated coating acts as a protective layer against material welding on the cutting edge, particularly useful when sawing ductile irons and steels that tend to stick. This treatment lowers friction and heat transfer at the cutting zone, which in turn slows wear and helps to preserve the tooth geometry over extended runs. The protective effect translates into longer service life and more stable cutting behaviour; when combined with correct feed and speed settings, users can expect improved consistency and fewer stoppages for blade dressing or replacement. Practical compatibility and safe setup for efficient workflow The blade features a 40 mm central bore and multiple auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) to match machine flange systems and to ensure secure mounting and run-out stability. It is specified for common industrial saw systems such as Eisele, Ulmia, Trennjäger, Rekord and Ultra circular sawing machines, enabling straightforward integration into existing production lines. Proper mounting and balancing are essential: secure clamping, correct flange fit and the recommended cutting parameters for the workpiece material will protect the geometry and preserve cutting performance. With these measures, the saw blade supports reliable, repeatable operation in demanding metal‑cutting applications. For machine-specific selection or supply from Metav Werkzeuge, contact our specialists in Emmerich for tailored advice and prompt delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814191NW Product type: Metal circular saw blade Brand: TECWERK SKU: 2000814191NW Facts Diameter: 350 mm Body width: 3.0 mm Teeth: 280 Bore diameter: 40 mm Pitch (division): 4 Special features Material: HSS Coating: vapour-treated Tooth form: BW (curved tooth with alternate bevel) Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Suitable for iron and steel processing Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra circular sawing machines Packaging unit: 1 FAQ What materials is this blade suited for? This saw blade is designed primarily for the cutting of iron and steel, benefiting from the HSS substrate and vapour-treated surface for reduced material build-up. How does the vapour-treated coating improve performance? The vapour-treated coating reduces adhesion of workpiece material to the teeth, lowering friction and extending the effective life of the cutting edge for longer uninterrupted runs. Which machines is the blade compatible with? The blade is compatible with common industrial circular sawing systems such as Eisele, Ulmia, Trennjäger, Rekord and Ultra machines; the 40 mm bore and auxiliary holes support secure flange mounting. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS-Co construction, vapour-treated anti-weld coating and a fine-tooth geometry for precise, burr-minimised cuts in stainless and other high-strength steels — procurement and technical enquiries can be directed to Metav Werkzeuge for fast supply or consultation. TECWERK metal circular saw blade Form C Ø350 mm, HSS‑Co, 140 teeth A TECWERK metal circular saw blade Form C for fine, reliable sawing of stainless and other high-strength steels in industrial circular sawing machines HSS‑Co construction for high wear resistance Vapour-treated surface to prevent material build-up Form C tooth geometry with 140 teeth for fine cuts 32 mm bore with multiple auxiliary holes for secure mounting Precision cuts for stainless and high‑strength steels The blade is made from HSS‑Co, a cobalt‑alloyed high‑speed steel that keeps the cutting edge stable under load and at elevated temperatures. With 140 teeth and a 3.0 mm kerf, the tool produces a fine, low‑burr finish that reduces downstream deburring work. The increased tooth count spreads the cutting action across more edges, lowering the cut force per tooth; this yields improved surface quality when working with stainless steel and other demanding alloys. Reduced material build‑up and extended tool life A vapour‑treated surface acts as an effective barrier against material adhering to the tooth flanks — commonly described as welding or build‑up during sawing of sticky alloys. This treatment reduces friction and heat at the cutting zone, translating into longer tool life and fewer interruptions for cleaning. In practice, the combination of treatment and cobalt‑alloy steel helps maintain cutting performance in continuous production environments. Secure mounting and machine compatibility for stable operation The blade features a 32 mm bore and a pattern of auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) to ensure reliable seating and compatibility with a broad range of circular sawing systems. The hole pattern assists alignment and mechanical fixation, helping to avoid run‑out and vibration. This design is suitable for a number of established machine brands, ensuring straightforward integration into existing production lines and safer operation under industrial conditions. Efficient workflow and targeted applications Form C tooth geometry — a curved tooth design with raker and secondary cutting elements — delivers a balance between cutting aggressiveness and surface finish, making the blade well suited to industrial sawing of tubes, profiles and solid material in stainless and high‑strength steels. The combination of HSS‑Co material and vapour treatment supports stable performance for medium‑ to high‑volume sawing tasks, helping workshops and fabrication shops achieve consistent results and reduce rework. For stainless steel precision and dependable throughput choose TECWERK blades — contact Metav Werkzeuge GmbH in Emmerich for technical advice, availability and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000814224NW Product: Metal circular saw blade Form C, Ø350 mm, HSS‑Co, 140 teeth, TECWERK UID: 2000814224NW Core data Diameter: 350 mm Teeth: 140 Width (kerf): 3.0 mm Bore diameter: 32 mm Pitch / division: 8 Special features Material: HSS‑Co (cobalt‑alloyed high‑speed steel) Coating: vapour‑treated (anti‑weld protection) Tooth form: C (curved tooth with raker and secondary cutting teeth) Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Suitable for: stainless steel and other high‑strength steels Compatible with: Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas circular sawing machines Packaging unit: 1 FAQ What materials is this blade intended for? The TECWERK metal circular saw blade is optimised for stainless steel and other high‑strength steels; its HSS‑Co construction and vapour‑treated surface reduce adhesion and wear during such applications. Which machines will accept this blade? With a 32 mm bore and the specified auxiliary hole pattern, the blade fits a wide range of industrial circular sawing machines, including Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas models. How does the vapour treatment benefit cutting performance? The vapour‑treated surface reduces material build‑up on the teeth, decreasing friction and heat generation; as a result, the blade maintains cutting performance longer and requires less frequent cleaning. What finish can be expected from the 140‑tooth configuration? The high tooth count combined with the C‑form geometry produces a fine cut with lower burr formation, making it well suited for applications where surface quality is important. How is the blade identified for ordering or reference? Reference the SKU 2000814224NW and the description "TECWERK metal circular saw blade Form C Ø350 mm, 140 teeth" when enquiring or placing an order. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Taking advantage of durable high-speed steel construction and a vapour-treated surface for reduced material adhesion leads to consistent cuts and less downtime; combine this with the precise 350 mm diameter and 3.0 mm cutting width for reliable production results. Order the blade directly via Metav Werkzeuge or consult Metav's specialists for machine compatibility and fast delivery. TECWERK metal circular saw blade Form C – 350 mm, HSS, vapour-treated A TECWERK metal circular saw blade Form C engineered for precision cutting of iron and steel in industrial circular saw machines and compatible mitre and production saws High-speed steel, vapour-treated 350 mm diameter, 3.0 mm kerf 160 teeth, tooth form C 40 mm bore with side holes Consistent, high-precision cuts for steel production The blade's high-speed steel body and fine tooth count deliver uniform cutting performance across repetitive tasks, reducing rework and scrap. With 160 teeth and a narrow 3.0 mm kerf, the geometry is optimised to produce clean edges and minimal burr formation on iron and steel workpieces. This results in improved part quality and less secondary finishing. The combination of tooth form and material hardness supports steady feed rates while maintaining dimensional accuracy on serial production runs. Less adhesion, more uptime thanks to vapour treatment A vapour-treated surface provides a protective layer that helps prevent material from welding onto the cutting edges during operation. This anti-weld characteristic reduces stoppages for cleaning and preserves the cutting geometry for longer intervals. In practice, the treatment extends useful tool life between maintenance, so machine throughput remains stable and predictable. For workshops seeking to cut downtime and maintain consistent cycle times, this surface finish yields tangible operational benefits. Secure mounting and broad machine compatibility Engineered with a 40 mm bore and multiple side holes (2 × 8/55 mm; 4 × 12/64 mm), the blade ensures concentric seating and secure fastening in common industrial saw arbors. The tooth form C — an arc-shaped tooth with front and rear cutting edges — supports smooth chip evacuation and balanced cutting forces. Compatibility with named saw systems such as Eisele, Ulmia, Trennjäger, Rekord and Ultra means straightforward integration into existing production equipment without adapter rework, facilitating a quick fit-and-run replacement strategy. Practical application focus and handling guidance Designed principally for iron and steel materials, the blade is a fit-for-purpose choice for workshops processing structural sections, profiles and bar stock. The combination of a robust HSS substrate and the vapour-treated finish is particularly suitable where weld-on of chips is a known issue. For optimal results, ensure the correct arbor fit and that machine guards and chip removal systems are functioning; Metav’s technical documentation and product data can be consulted for specific mounting tolerances and recommended operating parameters. Purchase the TECWERK vapour-treated HSS metal circular saw blade via Metav Werkzeuge for assured quality and reliable supply; Metav Werkzeuge’s specialists are available to confirm machine compatibility and delivery from Emmerich — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000814187NW Designation: Metallkreissägeblatt Form C D.350mm B.3,0mm HSS Bohrungs-D.40mm Z.160 TECWERK Manufacturer: TECWERK Core specifications Diameter: 350 mm Cutting width: 3.0 mm Bore diameter: 40 mm Teeth: 160 Pitch: 7 Tooth form: C Packaging unit: 1 Special features Material: HSS Coating: vapour-treated Side holes: 2 x 8/55 mm; 4 x 12/64 mm Anti-weld surface treatment described as steam-treated protection against material welding Suitable for Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is the blade suited for? The TECWERK metal circular saw blade (metal circular saw blade, SKU 2000814187NW) is specified for cutting iron and steel materials and is optimised for those workpiece types. How does the vapour-treated surface help in production? The vapour-treated finish on the TECWERK blade reduces material adhesion and the risk of chips welding to the tooth edges, which helps to maintain cutting performance and extend intervals between cleaning. What mounting dimensions must be observed? Mounting requires a 40 mm bore; the blade also includes side holes (2 × 8/55 mm and 4 × 12/64 mm) to ensure concentric seating and secure fastening on compatible arbors. Which machines is this blade compatible with? The blade is designed for use with Eisele, Ulmia, Trennjäger, Rekord and Ultra circular saw machines as indicated in the product specification. What does tooth form C mean for cutting behaviour? Tooth form C denotes an arc-shaped tooth with front and rear cutting edges, providing balanced cutting forces, improved chip formation and smoother finishing on steel profiles. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from a combination of HSS construction, a vapour-treated anti-weld finish and a fine 140-tooth geometry for consistently clean cuts in iron and steel. Order the blade directly via Metav Werkzeuge or consult our specialists for machine compatibility and optimal feeding parameters. TECWERK Metal circular saw blade Form C – 350 mm, HSS, 140 teeth The TECWERK Metal circular saw blade Form C is a high-precision HSS blade designed for fine cutting of iron and steel on industrial circular sawing machines HSS construction for long tool life Vapour-treated coating to reduce welding 140 teeth for fine, burr-free cuts Compatible with common metal saw machines Precision and performance for heavy metal cutting The circular blade combines HSS material with a 350 mm diameter and a 3.0 mm blade width to deliver consistently fine kerfs and prolonged tool life. With 140 teeth, the blade produces small chip loads per tooth, which reduces burring and improves surface finish on ferrous workpieces. This geometry is particularly suitable where dimensional accuracy and repeatability are required, for example in contract metalworking shops and component manufacturers. The construction yields reliable cutting behaviour under steady feed and moderate cutting speeds while maintaining blade stability and straightness. Advanced anti-weld treatment and tooth geometry for cleaner cuts The vapour-treated surface acts as a protective layer against material adhesion and welding during cutting, which is especially useful when processing sticky steels or interrupted cuts. The Form C tooth is a curved profile with both front and back cutting edges, providing progressive engagement and efficient chip separation. This tooth design reduces the propensity for edge build-up and helps to maintain a sharp cutting zone for longer intervals between regrinds. The blade features a 32 mm bore and a pattern of auxiliary mounting holes to ensure secure seating and vibration damping on compatible machines. Workshop fitment, mounting and operational benefits With auxiliary holes specified as 2 x 11/63 mm, 4 x 9/50 mm and 2 x 8/45 mm, the blade fits a wide range of industrial circular sawing machines, including Berg & Schmid, MEP, Pedrazzoli, Kasto and Thomas models. The compact kerf and dense tooth count allow for efficient material utilisation and reduced secondary finishing. Supplied as a single unit, the blade is intended for professional workshops and production environments where consistent throughput and predictable tool behaviour are priorities. Procurement via Metav ensures steady supply and technical guidance from an experienced partner who supports European workshops with a broad product portfolio and an established quality control process. For machine-specific advice or to secure the TECWERK 350 mm HSS circular saw blade with vapour-treated finish, contact Metav Werkzeuge for tailored guidance and reliable delivery to your workshop — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 2000814213NW Label: Metallkreissägeblatt Form C D.350mm B.3,0mm HSS Bohrungs-D.32mm Z.140 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade SKU / UID: 2000814213NW Facts Diameter: 350 mm Width: 3.0 mm Teeth: 140 Bore diameter: 32 mm Pitch: 8 Special features Material: HSS Coating: vapour-treated (anti-weld protection) Tooth form: Form C (curved tooth with front and back cutting edges) Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Compatibility: Berg & Schmid, MEP, Pedrazzoli, Kasto, Thomas circular saw machines Packaging unit: 1 FAQ Which materials can be cut with this blade? The TECWERK metal circular saw blade is designed for cutting iron and steel, as indicated by its HSS construction and tooth geometry. How is the blade mounted to a circular saw? The blade requires a 32 mm central bore and uses the specified auxiliary holes (2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm) for secure mounting on compatible circular sawing machines. What advantage does the vapour-treated coating provide? The vapour-treated finish reduces material adhesion and protects against welding at the cutting edge, improving cut quality and extending blade life under demanding metal cutting conditions. Is this blade suitable for automatic production runs? Yes. The combination of 140 teeth and HSS construction supports repetitive precision cutting in production environments using compatible circular saw machines. Can the blade be used on saws from different manufacturers? The blade is compatible with a range of industrial circular sawing machine brands, including Berg & Schmid, MEP, Pedrazzoli, Kasto and Thomas, subject to correct mounting and machine specifications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction and a vapour‑treated surface for extended blade life and reliable cutting of stainless and high‑strength steels; order the blade directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Metal circular saw blade, 350 mm, HSS‑Co, 180 teeth The TECWERK metal circular saw blade is a heavy‑duty 350 mm cutting disc designed for precision sawing of stainless and other high‑strength steels on industrial circular saw machines. 350 mm diameter for deep cuts 3.0 mm kerf for stable cutting 180 C‑form teeth for smooth chips Vapour‑treated coating against welding Robust steel composition for long service life and consistent results The blade is manufactured from HSS‑Co, a cobalt‑alloyed high‑speed steel that retains hardness at elevated cutting temperatures and thus prolongs tool life when working with tougher materials. The vapour‑treated surface acts as a protective barrier against material adhesion during cutting, reducing build‑up and preserving cutting geometry. Thanks to these technical choices the blade delivers reliable performance in demanding production environments, lowering frequency of tool changes and contributing to predictable process planning. Precise chip control and stable cuts for better surface quality A C tooth form with dedicated raker geometry creates controlled chip removal and reduces burring on the workpiece edge, which is particularly beneficial for stainless steel and high‑strength alloys. The slim 3.0 mm kerf provides cutting stability while limiting material loss, and the high tooth count (180 teeth) produces a fine finish suitable for through‑cuts where surface quality matters. The 40 mm bore ensures straightforward mounting on standard industrial saw spindles while the pattern of auxiliary holes stabilises the blade during rotation for reduced vibration. Designed for compatibility and workshop efficiency This blade is built for compatibility with a range of industrial circular saw brands, enabling rapid integration into existing production lines. The combination of high‑performance material and protective treatment reduces unplanned downtime by extending service intervals and maintaining cut quality over longer runs. As a supplier, Metav Werkzeuge pairs stock availability with technical guidance, helping workshops make informed choices and secure dependable replenishment from a central European distribution hub. Application guidance and safe working practice Optimised for cutting stainless and other high‑strength steels, the saw blade performs best with consistent feed rates and correct coolant or lubrication where recommended. The vapour‑treated surface lowers the risk of material welding at the teeth, while the blade geometry promotes controlled heat dissipation. Regular inspection of mounting conditions and adherence to machine manufacturer limits will ensure safe operation and help to preserve the blade’s cutting performance over many cycles. Contact Metav Werkzeuge for tailored machining recommendations and secure supply from our Emmerich quality hub Technical data Article number: 2000814236NW Product type: Metal circular saw blade Brand: TECWERK Material: HSS‑Co Core specifications Diameter: 350 mm Kerf/width: 3.0 mm Teeth: 180 Bore diameter: 40 mm Pitch: 6 Special features Coating: vapour‑treated (vapourised) Tooth form: C (arc tooth with raker and secondary raker) Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Suitable for stainless and other high‑strength steels Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials can this saw blade cut effectively? The TECWERK metal circular saw blade is designed primarily for stainless steel and other high‑strength steels; the HSS‑Co substrate and vapour‑treated coating improve performance on these materials. How does the vapour‑treated coating help in cutting? The vapour‑treated surface reduces material adhesion and welding on the tooth edges, prolonging tool life and maintaining cutting quality during longer production runs. What does the C tooth form mean for cutting quality? The C tooth form combines arc‑shaped rake teeth with rakers to produce controlled chip formation and a finer surface finish, especially useful when cutting difficult steels. Can the blade be mounted on standard industrial saws? Yes, the blade has a 40 mm bore and the pattern of auxiliary holes specified, making it suitable for mounting on common industrial circular saw spindles and the listed machine models. How does the high tooth count affect performance? A high tooth count (180 teeth) yields a smoother cut and reduced burr formation, which is advantageous for through‑cutting applications where surface finish and dimensional consistency are important. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of high-performance HSS‑Co cutting, a vapour-treated anti-weld surface and precise C tooth form geometry for reliable separation of stainless and other high-strength steels — order the TECWERK metal circular saw blade directly via Metav Werkzeuge or ask our consultants if needed TECWERK metal circular saw blade — 350 mm, HSS‑Co, 110 teeth (C tooth form) A TECWERK metal circular saw blade engineered for demanding stainless and high‑strength steel cutting, featuring a vapour‑treated finish and a 40 mm bore with multiple auxiliary holes 350 mm diameter with 110 teeth C tooth form HSS‑Co material for high cutting resilience Vapour-treated coating to prevent material welding Bore Ø 40 mm with multiple auxiliary holes Precision cutting for stainless and high‑strength steels The TECWERK metal circular saw blade combines HSS‑Co construction with a fine C tooth form to deliver narrow kerfs and steady feed rates on stainless steels and similarly tough alloys. The high tooth count yields smoother separation and reduced burr formation, which lowers the need for secondary finishing. For production environments where repeatable cut quality and minimal rework matter, the blade’s geometry ensures efficient material removal while maintaining dimensional consistency. Fewer stoppages thanks to anti‑weld surface treatment A vapour‑treated coating acts as a protective barrier against material adhesion and built‑up edge, particularly when sawing austenitic stainless steels. This surface treatment reduces friction and the likelihood of chips sticking to the teeth, leading to more consistent cutting temperatures and extended run times between maintenance cycles. The result is improved process reliability and a measurable reduction in unscheduled machine downtime. Secure mounting and broad machine compatibility The blade’s bore Ø 40 mm and the pattern of auxiliary holes (2 × 8/55 mm; 4 × 12/64 mm) provide solid axial and radial locating options for common circular saw fixtures. When paired with appropriate flanges and clamping hardware, the configuration fits a range of industrial saws, including Eisele, Ulmia, Trennjäger, Rekord and Ultra series machines. The robust mounting arrangement promotes concentric rotation and lowers vibration for cleaner cuts and prolonged component life. Durable performance and operational economy Constructed from HSS‑Co, the blade balances wear resistance with the toughness needed for intermittent and continuous cutting tasks. The combination of material, tooth geometry and anti‑weld treatment supports a longer service life compared with untreated alternatives, reducing blade change frequency and associated labour. For workshops prioritising consistent output and predictable maintenance cycles, this saw blade offers a practical route to optimised throughput and lower total operating costs. Order the TECWERK 350 mm metal circular saw blade through Metav Werkzeuge for dependable stainless steel cutting performance; Metav Werkzeuge can advise on stock status and application specifics at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814228NW Label: Metallkreissägeblatt Form C D.350mm B.3,0mm HSS-Co Bohrungs-D.40mm Z.110 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade Packaging unit: 1 UID: 2000814228NW Core specifications Diameter: 350 mm Cutting width: 3.0 mm Teeth: 110 Pitch: 10 mm Bore diameter: 40 mm Materials & special features Material: HSS‑Co Coating: vapour‑treated Tooth form: C (arc tooth with leading and trailing scoring cutters) Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 Suitable for stainless and other high‑strength steels Compatible with Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines FAQ What materials is the TECWERK metal circular saw blade intended for? The TECWERK metal circular saw blade is designed primarily for stainless steels and other high‑strength alloys as indicated by its HSS‑Co construction and anti‑weld finish. Which machines is this blade compatible with? Compatibility includes common industrial circular saw brands; the TECWERK blade fits machines such as Eisele, Ulmia, Trennjäger, Rekord and Ultra when the correct flange and clamping parts are used. What benefit does the vapour‑treated coating offer? The vapour‑treated coating on the TECWERK blade reduces chip adhesion and built‑up edge, helping to maintain cutting temperatures and extend effective cutting runs. How does the C tooth form affect cut quality? The C tooth form on the TECWERK blade provides smooth engagement and effective scoring action, which improves surface finish and reduces the need for secondary operations. Is resharpening an option for this blade? Resharpening possibilities depend on the extent of wear and available service facilities; consult manufacturer guidelines to determine whether the TECWERK blade is suitable for regrinding in a given application. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust cutting solution that combines HSS durability, a vaporised coating to reduce material build‑up and a fine 180‑tooth geometry for clean, low‑vibration metal cuts; order the blade directly via Metav Werkzeuge or consult the technical team for application guidance TECWERK Metal Circular Saw Blade Form C — 350 mm, HSS, 180 teeth The TECWERK Metal Circular Saw Blade Form C is designed for precise separation of iron and steel on standard metal cutting circular saws HSS construction for durable cutting Vaporised coating to reduce material build-up 350 mm diameter, 3.0 mm kerf 180 C-shaped teeth for fine metal cuts Consistent, precision cuts for steel and iron The blade is manufactured from HSS, a high‑speed steel alloy chosen for wear resistance and edge stability when cutting ferrous materials. The C‑shaped tooth profile with both leading and trailing cutting edges provides a controlled cutting action that reduces burr formation and improves surface finish. The combination of 180 teeth and a thin 3.0 mm kerf produces a fine cut suitable for parts where dimensional accuracy and edge quality matter, while the steam‑treatment and vaporised coating help to prevent material adhering to the blade during operation. Improved productivity with reduced rework A dense tooth count and narrow kerf lower material removal and minimise vibration, leading to faster cycle times and fewer secondary operations. The 350 mm diameter and compact kerf mean less saw power is wasted on excess cutting width, while the high tooth density maintains cutting stability. For production environments seeking a balance between throughput and finish, this blade provides an economical solution that supports efficient workflows and reduced scrap rates. Designed for straightforward integration with workshop saws The blade features a 40 mm bore and multiple auxiliary holes — 2 × 8/55 mm and 4 × 12/64 mm — to match common arbour and adapter configurations. Compatibility with machine brands such as Eisele, Ulmia, Trennjäger, Rekord and Ultra ensures simple retrofit into many metal cutting saws without complex adapters. Where machine interfaces differ, the auxiliary hole pattern supports a secure mounting and concentric running, aiding repeatable accuracy across batches. Maintenance and safety guidance for dependable service life The steam‑treated surface finish acts as a barrier against material build‑up and decreases the risk of weld‑on deposits during cutting, extending service intervals. Regular inspection of the tooth tips and immediate replacement when wear exceeds acceptable limits will preserve cut quality. For cleaning, remove debris and inspect the auxiliary holes and bore for wear; appropriate coolant and correct cutting parameters for the workpiece material will further prolong blade life and ensure safe operation. Discuss application details with Metav Werkzeuge to confirm suitability for specific steel grades and machine types and arrange fast supply from our Emmerich location Technical data Article number: 2000814189NW Label: Metallkreissägeblatt Form C D.350mm B.3,0mm HSS Bohrungs-D.40mm Z.180 TECWERK Manufacturer: TECWERK Product type: Metal circular saw blade SKU: 2000814189NW Facts Diameter: 350 mm Bore diameter: 40 mm Kerf / width: 3.0 mm Teeth: 180 Pitch (Teilung): 6 Special features Material: HSS Coating: vaporised Steam‑treated as protection against material build‑up Tooth form C: arced tooth with leading and trailing cutting edges Auxiliary holes: 2 × 8/55 mm; 4 × 12/64 mm Suitable for iron and steel workpieces Packaging unit: 1 FAQ Is this blade suitable for cutting hardened steel? The blade is designed for cutting iron and standard steel; it is produced from HSS and steam‑treated to reduce material adhesion, but for hardened steels specific cutting grades and confirmation of suitability are recommended. What does the vaporised coating do? The vaporised coating reduces the tendency for material to weld to the cutting edges, improving run‑in behaviour and extending the interval between cleaning or reconditioning. How does the 180‑tooth geometry affect the finish? A higher tooth count produces a finer finish and less burr on ferrous materials; the C‑shaped tooth profile further supports a controlled cut with good edge quality. Which machines is the blade compatible with? The blade is compatible with common metal cutting circular saws and is specifically noted for use on machines such as Eisele and Ulmia, plus Trennjäger, Rekord and Ultra models due to its bore and auxiliary hole pattern. How should the blade be mounted to ensure concentric running? Use the 40 mm bore with the corresponding arbour adapter and ensure the auxiliary holes align with the machine’s mounting pins; correct mounting prevents run‑out and supports consistent cut quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

The combination of HSS‑Co construction, vapour‑treated coating and a C‑tooth geometry delivers durable, low‑weld cutting for stainless and high‑strength steels; this ensures fewer stoppages and consistent edge quality. Order the TECWERK metal circular saw blade directly via Metav Werkzeuge or contact our consultants for machining advice. TECWERK metal circular saw blade Form C — 350 mm, HSS‑Co, 140 teeth TECWERK metal circular saw blade Form C for precision cutting of stainless and other high‑strength steels in industrial production environments. Vapour‑treated HSS‑Co construction 350 mm diameter with 40 mm bore 140 C‑form teeth for fine stainless cuts Compatible with Eisele, Ulmia and Rekord machines Cleaner cuts and reduced built‑up edge for stainless and high‑strength steels The HSS‑Co alloy combines high‑speed steel with cobalt to maintain hardness at elevated temperatures, enabling reliable cutting of stainless steel and other high‑strength materials. The vapour‑treated surface acts as a protective layer that reduces material welding to the gullets and cutting edges, decreasing the formation of a built‑up edge and minimising rework. With the C‑tooth geometry (arc tooth with rakers), chip formation is controlled to deliver a superior surface finish and consistent kerf width, which translates into fewer secondary operations and improved throughput. Machine compatibility and dimensional stability for uninterrupted shifts A stable tool geometry supports long runs: the blade’s 350 mm diameter, 40 mm bore and 3.0 mm body width provide mechanical stiffness for demanding cuts, while the fine tooth count (140 teeth) and a tooth pitch of 8 ensure smooth feed and reduced vibration. The layout of the auxiliary holes (2 x 8/55 mm; 4 x 12/64 mm) guarantees secure mounting on a range of circular sawing systems, including Eisele, Ulmia, Trennjäger, Rekord and Ultra machines. That compatibility reduces changeover time and supports stable, repeatable cuts across shifts. Durable design that supports cost‑effective production The combination of HSS‑Co material and a vapour‑treated finish extends blade life under high thermal load and abrasive conditions, allowing longer intervals between tool changes and less scrap. The C‑form tooth helps distribute cutting forces and limits notch wear when processing stainless or tough alloyed steels, which reduces maintenance hours and total cost of ownership. Packaged as a single unit for clear inventory control, the blade’s robust specification is designed for workshops seeking predictable performance and fewer unplanned interruptions. Contact Metav Werkzeuge for tailored guidance on selecting the right TECWERK HSS‑Co circular saw blade for specific stainless or high‑strength steel tasks — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000814227NW Label: Metallkreissägeblatt Form C D.350mm B.3,0mm HSS‑Co Bohrungs‑D.40mm Z.140 TECWERK Product type: metal circular saw blade Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 350 mm Bore diameter: 40 mm Width: 3.0 mm Teeth: 140 Tooth pitch: 8 Special features Material: HSS‑Co Coating: vapour‑treated (anti‑welding) Tooth form: C (arc tooth with rakers) Auxiliary holes: 2 x 8/55 mm; 4 x 12/64 mm Compatibility: Eisele, Ulmia, Trennjäger, Rekord, Ultra circular saw machines Application: stainless steel and other high‑strength steels FAQ What materials is this blade suited for? The TECWERK metal circular saw blade (SKU 2000814227NW) is specified for stainless steel and other high‑strength steels, owing to its HSS‑Co composition and vapour‑treated coating. How does the vapour‑treated coating affect performance? The vapour‑treated finish on the TECWERK HSS‑Co blade reduces material adhesion and built‑up edge, improving cut quality and extending service life under demanding stainless or alloyed steel applications. Which machines are compatible with this saw blade? This 350 mm blade fits a range of circular sawing systems, including Eisele, Ulmia, Trennjäger, Rekord and Ultra models, thanks to its 40 mm bore and the specified auxiliary hole pattern. How does the C‑tooth geometry influence the result? The C‑form tooth (arc tooth with rakers) promotes controlled chip evacuation and a fine surface finish, making it suitable for thin kerf, high‑quality cuts in stainless or hardened materials. Is the blade supplied ready for immediate mounting? The blade is supplied with the standard 40 mm bore and auxiliary holes as stated, allowing straightforward mounting on compatible machines; check machine flange specifications before fitting. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a cobalt-alloy high-speed steel (HSS‑Co) construction, a vapour‑treated surface to reduce material build-up, and a fine 180-tooth C geometry for consistently clean cuts in stainless and other high-strength steels — order the blade directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Metal Circular Saw Blade, Form C, 350 mm, HSS‑Co — Vapour‑treated, 180 teeth A TECWERK Metal Circular Saw Blade, Form C engineered for precision cutting of stainless steel and other high-strength materials on industrial metal-cutting saws High-performance HSS‑Co alloy Vapour-treated to reduce material welding Fine 180-tooth C tooth form Retrofit-ready with multiple auxiliary holes Clean, reliable cuts for stainless and high-strength steels The combination of HSS‑Co (cobalt-alloy high-speed steel) and a vapour‑treated surface delivers stable cutting performance when machining stainless steel and other high‑strength steels. The alloy’s superior heat resistance helps maintain cutting geometry under load, while the vapour treatment acts as a barrier against material adhesion, reducing the risk of build-up on the gullets. This results in more consistent cut quality and fewer interruptions for blade cleaning or regrinding, making the saw blade well suited to continuous production environments. Tooth geometry that reduces burrs and improves finish The C tooth form with its fine 180 teeth is designed to combine chip control with a smooth finish on metal edges. The arched tooth profile with complementary scoring cutters provides a small kerf and reduced burr formation, producing cleaner component edges straight from the cutting operation. For workshops moving from rough cutting to jobs that demand improved surface quality, this blade geometry minimises post‑processing and supports higher first-pass yields. Mounting options and machine compatibility for fast changeovers The blade’s 350 mm diameter and 32 mm bore are complemented by a set of auxiliary holes — 2 x 11/63 mm, 4 x 9/50 mm and 2 x 8/45 mm — allowing secure mounting on a wide range of circular saw frames. Compatibility is noted with leading industrial saw manufacturers such as Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas, which simplifies retrofitting and reduces machine downtime. The blade’s 3.0 mm kerf strikes a balance between stiffness and material removal rate for many production tasks. Durability, service intervals and production advantages Made from HSS‑Co and finished with a protective vapour treatment, the blade is built for extended service life under demanding cutting conditions. The narrow 3.0 mm body reduces material waste while retaining sufficient rigidity to avoid chatter on most standard metal‑cutting saws. Fewer interruptions for cleaning, combined with predictable wear characteristics, support a steadier production flow and lower total machining costs over time. Where high component finish and repeatability are priorities, this circular blade contributes to improved throughput and less rework. For robust stainless‑steel cutting choose the TECWERK 350 mm HSS‑Co blade — contact Metav Werkzeuge for tailored technical advice and to place orders at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814229NW Brand: TECWERK Product type: Metal circular saw blade Material: HSS‑Co Coating: vapour-treated Diameter: 350 mm Width: 3.0 mm Bore diameter: 32 mm Teeth: 180 Tooth form: C Auxiliary holes: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm Packaging unit: 1 Numbers / Core technical data Diameter: 350 mm Kerf/width: 3.0 mm Bore: 32 mm Teeth: 180 Tooth pitch/spacing: 6 Designs / Special features Vapour‑treated surface for protection against material welding Suitable for stainless steel and other high‑strength steels C tooth form — arched tooth with scoring cutters Retrofit compatibility with Berg & Schmid, Mep, Pedrazzoli, Kasto, Thomas saws FAQ Which materials is this blade suitable for? The TECWERK metal circular saw blade is designed for stainless steel and other high‑strength steels, with the HSS‑Co alloy and vapour treatment helping to prevent material adhesion during cutting. What does the C tooth form mean in practice? C tooth form refers to an arched profile with scoring cutters that improves chip control and reduces burrs; the 180‑tooth configuration delivers a fine finish with lower need for subsequent grinding. Can the blade be mounted on different saw brands? Yes — the blade’s 32 mm bore and multiple auxiliary holes allow mounting on a range of industrial circular saws, including models from Berg & Schmid, Mep, Pedrazzoli, Kasto and Thomas. How does the vapour treatment affect performance? The vapour‑treated surface acts as a protective layer to reduce material build‑up on the cutting edges, which helps maintain cutting quality and extends periods between maintenance. What bore and auxiliary hole pattern does the blade use? The blade has a 32 mm central bore and auxiliary holes in the pattern: 2 x 11/63 mm; 4 x 9/50 mm; 2 x 8/45 mm for secure mounting options. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Metallkreissägeblatt Form BW D.350mm HSS-Co TECWERK Metallkreissägeblatt Form BW D.350mm HSS-Co TECWERK – Präzisionsblatt für das Trennen von VA und hochfesten Stählen in Maschinensystemen wie Eisele, Ulmia oder Rekord HSS-Co mit Dampfbehandlung Bogenzahn BW mit 220 Zähne Bohrung Ø 40 mm plus Nebenbohrungen Speziell für VA- und hochfeste Stahllegierungen Geeignet für Eisele, Ulmia und Rekord Maschinen Überlegene Werkstoffwahl für lange Standzeit und sauberen Schnitt Das HSS-Co-Material kombiniert die Zähigkeit von Schnellstahl mit der Verschleißfestigkeit einer Kobaltlegierung, wodurch das Blatt für anspruchsvolle Anwendungen geeignet ist. Die Dampfbehandlung reduziert das Risiko von Materialaufschweißung an den Schneidkanten und verbessert die Standzeit bei der Bearbeitung von rostfreiem Stahl. Dadurch entsteht eine messbare Reduktion von Nacharbeit und Materialverlust, was die Wirtschaftlichkeit in der Fertigung erhöht. Zahngeometrie und Schnittbild für präzise Trennungen Die BW-Zahnform mit wechselseitiger Abschrägung und insgesamt 220 Zähne sorgt für feine Schnittkanten und gleichmäßigen Spanabfluss. Bei einem Blattdurchmesser von 350 mm und einer Blattbreite von 3,0 mm reduziert sich die Gratbildung sichtbar, was Schleifaufwand und Montagezeiten senkt. Diese Auslegung ermöglicht saubere Schnitte bei dünnen und mittleren Blechdicken und liefert konstante Schnittqualität über lange Einsatzzeiten. Montagefreundlichkeit und Maschinenkompatibilität Mit einer Nabenbohrung von Ø 40 mm sowie 2 x 8/55 mm und 4 x 12/64 mm Nebenbohrungen passt das Blatt auf zahlreiche gängige Kreissägemaschinen. Die standardisierte Lochung erleichtert den schnellen Wechsel und minimiert Maschinenstillstand. Für Werkstätten bedeutet das: weniger Rüstzeit, höhere Produktivität und planbare Produktionsabläufe. Praxisnutzen und Anwendungsempfehlung In Fertigungen, die überwiegend VA-Material und hochfeste Stähle verarbeiten, bietet dieses Blatt eine zuverlässige Kombination aus Schnittqualität und Standzeit. Die dampfbehandelte Oberfläche wirkt gezielt als Schutz gegen Aufschweißung, sodass sich die Schneiden länger scharf halten. Für optimale Ergebnisse wird das Blatt auf den vorgesehenen Maschinentypen betrieben und mit geeigneten Kühl- und Schmiermitteln verwendet. Empfehlung: Das Metallkreissägeblatt von TECWERK mit HSS-Co und Dampfbehandlung für anspruchsvolle VA-Zerspanung direkt über Metav Werkzeuge beziehen – bei technischen Fragen eMail: info@metav-werkzeuge.com oder Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 2000814226NW Marke: TECWERK Produktart: Metallkreissägeblatt Bezeichnung: Metallkreissägeblatt Form BW D.350mm B.3,0mm HSS-Co Bohr.-D.40mm Z.220 Fakten Zähne: 220 Breite: 3,0 mm Durchmesser: 350 mm Teilung: 5 Bohrungsdurchmesser: 40 mm Verpackungseinheit: 1 Besonderheiten Material: HSS-Co (Co = Kobaltlegierung) Beschichtung: vaporisiert (Dampfbehandlung zum Schutz gegen Aufschweißung) Zahnform: BW (Bogenzahn mit wechselseitiger Abschrägung) Nebenbohrungen: 2 x 8/55 mm; 4 x 12/64 mm Kompatibilität: Eisele, Ulmia, Trennjäger, Rekord, Ultra Kreissägemaschinen FAQ Für welche Werkstoffe ist das Blatt besonders geeignet? Das Metallkreissägeblatt von TECWERK wurde für VA-Material und andere hochfeste Stähle entwickelt. Die Kombination aus HSS-Co und Dampfbehandlung reduziert Aufschweißung und verbessert die Standzeit bei diesen Werkstoffen. Passt das Blatt auf meine Maschine mit 40 mm Nabe? Ja, das Blatt hat eine Nabenbohrung Ø 40 mm und zusätzliche Nebenbohrungen, sodass es auf vielen Standard-Kreissägemaschinen montierbar ist. Prüfen Sie die Bohrbild-Anforderungen Ihrer Maschine wie bei Eisele oder Ulmia. Wie wirkt die Dampfbeschichtung in der Praxis? Die vaporisierte Oberfläche wirkt als Schutz gegen Materialaufschweißung an der Schneidkante. Das führt zu saubereren Schnitten und verlängert Intervalle zwischen Nachschärfen oder Blattwechsel. Wie viele Blätter sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit beträgt 1 Stück, wie in der Artikelbeschreibung angegeben. Kann das Blatt auch für Aluminium oder Nichteisenmetalle eingesetzt werden? Das Blatt ist primär für VA und hochfeste Stähle ausgelegt. Für Aluminium und weiche Nichteisenmetalle können andere Zahngeometrien effizienter sein; bei Unsicherheit empfiehlt sich eine technische Rückfrage. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund

Take advantage of a carbide-tipped design and optimised tooth geometry for quieter, longer-lasting cuts in metalworking. Combine high cutting quality with the option of resharpening for sustained performance — order the blade directly via Metav Werkzeuge or ask the consultants for specification advice. Jepson carbide-tipped circular saw blade, 355 mm — 90 teeth, 25.4 mm bore Jepson carbide-tipped circular saw blade, 355 mm, designed for precision cutting of steel, stainless steel and non-ferrous metals in workshop and industrial environments Carbide-tipped for long service life Optimised tooth geometry for clean cuts Noise-reduced operation for less vibration Resharpenable for extended lifecycle Consistent precision for industrial metal cutting The carbide-tipped construction delivers a reliable balance between hardness and toughness, resulting in a long service life and uniform cutting performance. The blade is engineered for repetitive tasks such as cutting steel tubes, iron and various non-ferrous metals, where tool longevity translates directly into lower downtime and fewer blade changes. Carbide tips resist wear at elevated temperatures, making the blade suitable for demanding production runs while maintaining a clean kerf and reduced burr formation. Better finishes and less rework thanks to optimised tooth design An optimised tooth geometry reduces cutting forces and improves chip evacuation, which produces a superior surface finish and reduces the need for secondary operations. For shops aiming to raise throughput without sacrificing quality, this means fewer manual finishing steps and consistent part quality from batch to batch. The combination of tooth form and blade body stiffness also contributes to reduced noise and vibration, improving the working environment and allowing machines to run more smoothly. Compatibility, maintenance and cost-efficiency over the lifetime The blade is resharpenable, extending its usable life and improving overall cost-efficiency compared with disposable alternatives. Being optimised for the PSDC 9435 series makes it a practical choice for users of that equipment, but the standard 25.4 mm bore is compatible with a wide range of commercial saw arbors. Regular resharpening preserves cutting geometry and surface quality, while the robust carbide tips tolerate multiple regrinds before replacement is necessary, keeping total cost of ownership down. Practical guidance for specification and selection When selecting a blade for mixed-metal workshops, consider the material mix and desired finish: this blade performs well on stainless steel, mild steel and non-ferrous metals, and is also suitable for cutting certain composites where carbide cutting edges are appropriate. For specific feed rates and cutting speeds, refer to machine manufacturer data and adapt cutting parameters to the thickness and alloy of the workpiece to maintain tip life and cut quality. If clarification is required on compatibility with particular saw models or material grades, technical advice is available to ensure the right choice. For precision, longevity and quieter metal cutting with Jepson carbide-tipped blades, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4681346003NW Designation: Carbide-tipped circular saw blade, 355 mm, 90 teeth, 25.4 mm bore Packaging unit: 1 Facts Diameter: 355 mm Teeth: 90 Kerf / blade thickness: 2.2 mm Bore diameter: 25.4 mm Special features Suitable for stainless steel, steel and non-ferrous metals Carbide-tipped Optimised for PSDC 9435 Very high service life Excellent cutting quality Noise-reduced design Resharpenable FAQ What materials is this blade suitable for? The Jepson carbide-tipped circular saw blade is suitable for stainless steel, steel and non-ferrous metals, and performs well on typical workshop alloys. Can the blade be resharpened and how does that affect life span? Yes — the blade is resharpenable, which extends its service life and reduces total cost of ownership compared with non‑resharpenable alternatives. Is the blade compatible with standard saw arbors? The blade uses a 25.4 mm bore, making it compatible with many commercial saw arbors; adapt with the appropriate flange where necessary. What benefits does the noise-reduced design deliver in production? Reduced noise and vibration lead to improved operator comfort and can reduce machine strain, contributing to more stable cutting and improved surface quality. Is this blade optimised for any particular saw model? The blade is described as optimised for the PSDC 9435 series while remaining suitable for a broad range of industrial circular saws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a balance between precise cutting and long-term robustness: the combination of a 355 mm diameter, 80 teeth and a carbide-tipped design ensures consistent, fine-edge performance for metalworking tasks; order the blade directly via Metav Werkzeuge or request technical advice from our consultants. METALLKRAFT STA metal circular saw blade – 355 mm, 80 teeth, carbide-tipped The METALLKRAFT STA metal circular saw blade is designed for industrial metal cutting on standard circular saws, offering fine-tooth geometry for a smoother finish in fabrication and workshop environments. 355 mm diameter for standard industrial saws 80 carbide-tipped teeth for fine cutting 2.4 mm kerf for reduced material loss 25.4 mm bore for universal mounting Consistent precision for metalworking workflows The 355 mm diameter combined with 80 teeth produces a cutting action that favours a finer surface finish and reduced burring compared with coarse-tooth alternatives. For operations where part quality matters, this geometry reduces secondary finishing and improves overall throughput. The combination of tooth count and geometry is particularly suited to sheet and light-profile cutting where precision and repeatability are required. Highlighted benefits include more predictable cut lines and easier post-process handling, making the blade a reliable component in small-series production and trade workshops. Built for durability and efficient material removal Equipped with carbide-tipped teeth, the blade maintains sharpness over extended runs, resisting wear during continuous metal cutting. The relatively narrow 2.4 mm kerf minimises material waste and reduces cutting forces, which can lower energy consumption per cut and decrease heat input at the kerf. These properties translate into longer tool life and fewer blade changes during busy shifts. The robust tip material supports sustained cutting of typical ferrous workpieces encountered in general metal fabrication, while the fine-tooth configuration helps to manage chip formation and prevent snagging on thin sections. Fitment and operational considerations for the workshop A 25.4 mm bore provides compatibility with common arbor standards; adaptors are available for other spindle sizes where necessary. The blade’s dimensions (355 x 2.4 x 25.4 mm) match many standard industrial saws and make it a straightforward replacement for like-for-like setups. For best results, pair the blade with appropriate feed rates and cutting speeds for the material in question and ensure the saw’s guard and extraction systems are correctly configured to remove chips and reduce heat. Using a carbide-tipped blade in a well-maintained saw increases uptime and contributes to a predictable production rhythm in the workshop. For precise industrial metal cutting, contact Metav Werkzeuge for procurement and expert guidance—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and applications. Technical data Article number: 4000804020NW Article name: Metall circular saw blade STA D.355mm B.2,4mm HM, bore D.25,4mm, Z.80 METALLKRAFT Dimensions: 355 x 2.4 x 25.4 mm Packing unit: 1 Facts Teeth: 80 Kerf: 2.4 mm Bore diameter: 25.4 mm Compatible with MTS 356 Special features Carbide-tipped teeth (HM) Fine-tooth geometry for improved finish Designed for industrial metal cutting FAQ What materials is this blade suitable for? The METALLKRAFT STA metal circular saw blade is intended for general metal cutting applications; its carbide-tipped teeth are optimised for typical ferrous fabrication tasks. Can the blade be mounted on standard saws? Yes, the blade features a 25.4 mm bore and dimensions of 355 x 2.4 x 25.4 mm, allowing mounting on saws with matching spindles or with suitable adaptors. How does the 2.4 mm kerf affect production? A 2.4 mm kerf reduces material waste and cutting forces, which can improve efficiency and reduce energy usage per cut when using the METALLKRAFT STA blade. Is the blade suitable for thin sheet metal work? The fine-tooth configuration of the blade supports cleaner cuts in thinner sections, producing less burring and requiring less secondary finishing. How often should the blade be inspected or replaced? Inspection frequency depends on use intensity; however, the carbide-tipped design of the blade typically extends service life compared with non-tipped alternatives, reducing the rate of replacements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a 355 mm diameter, 2.4 mm kerf and 80-tooth carbide-tipped geometry to secure clean, burr‑reduced aluminium cuts and long running intervals; order directly via Metav Werkzeuge or consult the team for tailored selection and machine compatibility. METALLKRAFT 355 mm metal circular saw blade (80T, carbide-tipped) — for precision aluminium cutting A METALLKRAFT 355 mm metal circular saw blade engineered for fine finishing on aluminium profiles and billets in workshop and light industrial sawing applications. 355 mm diameter for large section cuts 80 fine teeth for smooth aluminium finish Carbide-tipped for extended tool life 25.4 mm bore fits standard arbors Burr‑free aluminium cuts for a superior finish The blade’s high tooth count and geometry deliver consistently clean, burr‑reduced edges when sawing aluminium. With 80 teeth and a narrow 2.4 mm kerf, the design reduces material deformation and minimises secondary finishing work, increasing throughput in series production. The combination of fine tooth pitch and appropriate hook angle (as implemented in this class of blades) yields a smoother cut surface and lower mechanical stress on fragile or thin‑walled sections, which translates into reduced rework and improved component acceptance rates. Durable carbide tips for extended uptime Equipped with carbide‑tipped teeth, this circular blade resists wear under continuous use, preserving cutting performance over many cycles. Carbide (HM) tips maintain sharpness longer than high‑speed steel equivalents and tolerate the heat generated during high‑speed aluminium cutting, which reduces the frequency of blade changes and maintenance interventions. This durability supports reliable production planning and lowers the total cost of ownership through fewer interruptions and sustained cutting quality. Simple integration with common sawing systems Specified dimensions of 355 x 2.4 x 25.4 mm ensure compatibility with standard industrial arbors and bench saws, including machines designated in the product note for MTS 356. The 25.4 mm bore accommodates common shaft sizes, simplifying tool changeover and setup. Clear dimensional conformity reduces downtime during installation and permits predictable cutting parameters when combined with machine manufacturer tables for feed and speed, enabling a straightforward integration into existing workflows. Optimised for workshop and light industrial use Designed for both dedicated metalworking shops and light industrial workshops, this blade balances precision and robustness. The METALLKRAFT cutting disc offers a blend of fine finishing capability and wear resistance, making it suitable for repetitive aluminium cutting tasks where surface quality and dimensional accuracy matter. The blade’s geometry prioritises consistent results over long runs, which supports batch processing and repetitive fabrication tasks commonly found in small to medium production environments. Contact Metav Werkzeuge for machine‑specific recommendations and secure the METALLKRAFT 355 mm carbide‑tipped blade to improve aluminium cutting precision in the workshop Technical data Article number: 4000804015NW Label: Metallkreissägeblatt Alu.D.355mm B.2,4mm HM Bohrungs‑D.25,4mm Z.80 METALLKRAFT Dimensions & numbers Diameter: 355 mm Kerf/width: 2.4 mm Bore diameter: 25.4 mm Teeth: 80 Packaging unit: 1 Materials & special features Carbide‑tipped teeth (HM) Application: aluminium Compatible with MTS 356 (as noted) Brand: METALLKRAFT FAQ What materials is this blade intended for? The METALLKRAFT metal circular saw blade (SKU 4000804015NW) is specified for aluminium, optimised for aluminium profiles and billets where a fine finish is required. Will the blade fit my saw spindle? The blade’s 25.4 mm bore fits standard arbors; compatibility with a specific saw should be confirmed against the machine’s arbor diameter and any adaptor requirements. How does the tooth count affect cutting quality? An 80‑tooth configuration provides a finer cutting action that reduces burr formation and improves surface finish, especially beneficial for thin sections and visible aluminium components. Is the blade suitable for production runs? Yes, the carbide‑tipped (HM) teeth are designed for extended life under repetitive use, supporting longer production intervals with consistent cut quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com