Take advantage of a vacuum‑hardened HSS bimetal construction combined with a 13 mm bore and set teeth at 6 TPI for reliable, versatile machine cutting; order through Metav Werkzeuge or request specialist advice for compatibility and mounting. TECWERK machine saw blade L550 x B45 x S2.25 mm — HSS bimetal, 13 mm bore, 6 TPI A TECWERK machine saw blade L550 x B45 x S2.25 mm engineered for robust machine mounting and general‑purpose cutting across a wide range of workpiece materials in workshop and light industrial environments. Vacuum‑hardened HSS bimetal construction 13 mm bore for standard machine mounting 45 mm width for stable guided cutting Set teeth, 6 TPI for versatile material cuts Precision and performance for demanding workshop tasks The vacuum‑hardened HSS bimetal build provides a balance between hardness and toughness, enabling high cutting performance and longer edge life under continuous use. With an overall length of 550 mm and a 45 mm blade width, the geometry supports stable feed and reduced vibration, which translates into cleaner cuts and fewer rejects in production. The 13 mm bore ensures simple fitting to compatible saw arbors; length correlates to the hole‑spacing standard for routine mounting checks. Durability that reduces downtime and service costs Vacuum hardening of the HSS bimetal tooth strip increases resistance to thermal softening and abrasive wear, extending usable life compared with non‑hardened alternatives. Combined with set teeth and 6 TPI, the blade clears swarf efficiently, lowering heat build‑up and the need for frequent blade changes. This material and tooth design supports predictable maintenance intervals and helps maintain throughput in small to medium production lines. Compatibility and practical application advice The blade’s specification—L550 x B45 x S2.25 mm, 13 mm bore, 6 TPI, and HSS bimetal—makes it suitable for a broad spectrum of machine saws where this mounting and length convention is standard. For safe and efficient use, ensure the saw’s arbor and guards match the blade’s dimensions and that feed rates are adjusted to the workpiece material and thickness. For questions about fitment or to confirm suitability for specific applications, the technical team at Metav Werkzeuge can provide practical guidance and mounting recommendations. Contact Metav Werkzeuge in Emmerich for availability, technical compatibility checks and tailored mounting advice on the TECWERK machine saw blade (SKU 2000814137NW) Technical data Article number: 2000814137NW Manufacturer: TECWERK Product type: machine saw blade Packaging unit: 1 Facts Overall length: 550 mm Blade width: 45 mm Thickness: 2.25 mm Bore diameter: 13 mm Teeth per inch: 6 TPI Special features Material: HSS bimetal Tooth form: set teeth Heat treatment: vacuum‑hardened Intended use: machine cutting FAQ What materials can this saw blade cut? The TECWERK machine saw blade (HSS bimetal, 6 TPI) is designed for versatile machine cutting and is suitable for a wide range of workpiece materials when used with appropriate feed rates and machine settings. How is the blade mounted in a saw? Mounting requires a matching arbor and correct hole spacing; the blade’s 13 mm bore and 550 mm length correspond to standard machine mounting dimensions—verify arbor compatibility before installation. How does vacuum hardening benefit blade life? Vacuum hardening increases tooth strip hardness and reduces thermal softening, which improves wear resistance and helps maintain cutting performance over longer production runs with the TECWERK machine saw blade. Is the blade suitable for continuous production use? Yes, the combination of HSS bimetal, vacuum hardening and set teeth supports longer service intervals and stable cutting in light industrial and workshop production environments. What should be checked before first use? Confirm arbor diameter, blade seating, saw guard clearance and recommended feed/speed for the material; these checks help ensure safe operation and optimal performance with the TECWERK blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable, HSS bimetal construction and vacuum-hardened finish combined with precise 10.5 mm bore placement for secure clamping on compatible machines; the result is reliable cutting performance across a wide range of materials. Order directly via Metav Werkzeuge or consult the team for application advice and machine compatibility. TECWERK machine saw blade L550 × 45 × 2.25 mm – HSS bimetal, 10.5 mm bore, 4 TPI The TECWERK machine saw blade L550 × 45 × 2.25 mm is a vacuum-hardened HSS bimetal band blade made for heavy-duty cutting tasks on Kasto band saws, offering a long-lasting edge and flexible material handling. HSS bimetal, vacuum-hardened construction Compatible with Kasto band saws only 550 mm length × 45 mm width × 2.25 mm thickness 10.5 mm bore, 4 TPI, set teeth Robust cutting performance for varied workshop tasks The HSS bimetal build and vacuum-hardening process provide enhanced wear resistance and sustained edge life, enabling consistent cuts in a broad spectrum of jobs. This durability translates into longer runtimes between blade changes and more predictable production scheduling. The tool’s wear-resistant composition means fewer interruptions for blade replacement, which supports smoother workflow and lower machine downtime. Engineered for precise clamping and stable operation A key design detail is the 10.5 mm bore with offset clamping holes configured specifically for Kasto machines. This ensures secure mounting and minimal runout during operation, improving cut accuracy and reducing vibration. The blade’s set teeth and 4 TPI arrangement balance material removal and finish, delivering efficient chip evacuation while maintaining a controlled kerf — particularly useful when switching between different workpiece materials. Clear technical advantages that simplify machine integration With a length of 550 mm, width 45 mm and thickness 2.25 mm, the blade matches common shop requirements for straight, robust sawing on compatible band saw frames. The medium 4 TPI tooth count is a compromise between fast cutting and acceptable surface quality, which helps to reduce the need for secondary finishing. Specified as a Kasto execution, the blade eliminates ambiguity at procurement time and guarantees that clamping interface and hole pattern align with the intended machine series. Operational benefits and safe handling considerations The vacuum-hardened tool metal improves resistance to thermal stress and wear, which benefits safety through predictable failure modes and stable cutting behaviour. Stored and handled correctly, the blade maintains its geometry and tooth set, preserving cutting precision over many cycles. Regular inspection of tooth set and bore integrity will extend service life and keep performance consistent across jobs. Discuss application requirements with Metav Werkzeuge to confirm suitability for the intended tasks and Kasto machine model, or request tailored advice from our specialists at Metav Werkzeuge. Technical details SKU: 2000814148NW Product type: Machine saw blade Manufacturer: TECWERK Facts Length: 550 mm Width: 45 mm Thickness: 2.25 mm Bore diameter: 10.5 mm Teeth: 4 TPI Special features Material: HSS bimetal Treatment: Vacuum-hardened Tooth form: Set teeth Execution: Kasto version with offset clamping holes Machine compatibility: Only for Kasto band saws Packaging unit: 1 FAQ What materials can this blade cut effectively? The TECWERK machine saw blade is vacuum-hardened HSS bimetal and is engineered to cut a wide range of materials; the blade’s construction supports durable performance across varied workpieces. Is this blade compatible with non-Kasto band saws? This particular version has offset clamping holes configured for Kasto machines, so compatibility with non-Kasto frames is not guaranteed. How does the 4 TPI tooth count affect cutting results? A 4 TPI configuration offers a balance between cutting speed and surface finish, suitable for general-purpose sawing where moderate finish and efficient material removal are required. What ensures secure mounting and reduced vibration? The 10.5 mm bore and the Kasto-specific offset holes provide precise clamping alignment, which reduces runout and vibration during operation. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum‑hardened HSS bimetal construction and 6 TPI set teeth for reliable machining of a wide range of workpieces; the 550 mm overall length and 45 mm cutting width support continuous production runs with consistent results. Order directly via Metav Werkzeuge or request consultation from the Metav team for machine‑specific advice. Maschinensägeblatt L550 x B45 x S2.25 mm, HSS — TECWERK machine saw blade with 10.5 mm bore Maschinensägeblatt L550 x B45 x S2.25 mm, HSS — TECWERK machine saw blade with 10.5 mm bore is a vacuum‑hardened, high‑speed steel bimetal blade designed for industrial machine sawing, optimised for Kasto systems HSS bimetal, vacuum-hardened construction 550 mm overall length, 45 mm cutting width 6 TPI set teeth for general material cutting 10.5 mm mounting hole for Kasto machines Robust construction for continuous industrial sawing The HSS bimetal composition combines a high‑speed steel cutting edge welded to a flexible backing strip, delivering a balance of hardness and toughness for extended blade life. Vacuum hardening increases wear resistance without compromising the backing material, resulting in consistent tooth geometry over long runs. This construction reduces downtime through fewer blade changes and supports predictable cutting performance, which is essential where throughput and repeatability are priorities. Consistent cut quality across diverse materials With a 6 TPI (teeth per inch) configuration and set teeth, the blade offers an effective compromise between cutting speed and chip evacuation, making it suitable for a broad spectrum of materials. “Set teeth” means the teeth are alternately offset to create a kerf wider than the blade body, preventing binding and improving chip clearance. For users unfamiliar with the terms: TPI indicates tooth density—lower TPI gives faster, coarser cuts; higher TPI produces finer finishes. The blade’s geometry supports efficient sawing while maintaining surface quality where finish and dimensional control matter. Machine compatibility and straightforward mounting The blade features a 10.5 mm mounting bore and offset mounting holes specifically configured for Kasto machines, ensuring precise seating and secure fixation on compatible systems. The backing and hole pattern are matched to machine clamping systems to reduce vibration and improve tracking. For integration into existing lines, verify machine compatibility: this blade is manufactured for use on Kasto machines only and is not universal. Correct mounting and machine alignment will extend blade life and preserve cut accuracy during repetitive operations. Operational benefits and maintenance guidance A 45 mm cutting width and 2.25 mm blade thickness provide structural stability for vertical and band sawing applications while minimising unnecessary material removal. Regular inspection of tooth integrity and appropriate machine feed rates will preserve the vacuum‑hardened edge and delay resharpening cycles. When reconditioning is required, consult specialist blade service providers to retain the welded bimetal bond and original tooth geometry; improper grinding can reduce performance. For dependable industrial sawing solutions and guidance on integrating this TECWERK blade into Kasto equipment, contact Metav Werkzeuge for a tailored recommendation and procurement support at Metav Werkzeuge in Emmerich Technical data Article number: 2000814150NW Product: Machine saw blade Manufacturer: TECWERK Facts Overall length: 550 mm Width: 45 mm Thickness: 2.25 mm Bore diameter: 10.5 mm Teeth per inch: 6 Special features Material: HSS-Bimetal Tooth form: set teeth Vacuum-hardened blade Offset mounting holes for Kasto machines Packaging unit: 1 FAQ What materials can this blade cut effectively? The TECWERK machine saw blade is engineered for versatile performance; the HSS‑bimetal edge and 6 TPI tooth pattern enable sawing of a wide range of metals and general workshop materials, with efficient chip evacuation due to the set teeth. Is this blade compatible with non-Kasto machines? No. The blade includes offset mounting holes configured specifically for Kasto machines; use on non‑Kasto systems may result in improper seating and reduced performance. How does vacuum hardening benefit the blade? Vacuum hardening increases the wear resistance of the cutting edge without inducing surface contamination, so the blade maintains tooth geometry longer and offers more consistent cut quality during series production. What does 6 TPI mean for cutting results? Six teeth per inch indicates a medium tooth density that balances cutting speed with finish quality; it is suitable where faster material removal is required while retaining acceptable surface finish. Are there special maintenance recommendations for this saw blade? Periodic inspection of tooth condition and adherence to recommended feed and speed settings will extend blade life; when resharpening is needed, use services familiar with bimetal blades to preserve the welded joint and original profile. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS bimetal construction and vacuum-hardening for extended blade life, together with exact compatibility with Kasto clamping systems for reliable installation; order directly via Metav Werkzeuge or consult the specialists if clarification is required. TECWERK band saw blade L575 x 50 x 2.5 mm – HSS bimetal, 4 TPI A TECWERK band saw blade L575 x 50 x 2.5 mm designed for high-performance cutting on Kasto band saws, offering durable teeth geometry and secure mounting for industrial workshop use. HSS bimetal, vacuum-hardened blade 575 mm overall length for Kasto machines 50 mm cutting width, 2.5 mm thickness 4 TPI with set teeth for efficient cutting Consistent performance from HSS bimetal construction The HSS bimetal design combines a high-speed steel cutting edge welded to a flexible backing, delivering a balance of hardness and toughness that resists premature wear. The vacuum-hardened treatment increases edge retention and reduces the frequency of re-tensioning or replacement, which directly contributes to fewer production interruptions and lower lifecycle costs. This configuration is particularly suited where steady, dependable cutting performance is required across varied workshop tasks. Precision fit and secure mounting for Kasto machines This blade features offset clamping holes engineered specifically for Kasto machines, ensuring correct alignment and stable fixation during operation. The tailored hole pattern eliminates slippage and helps maintain tension consistency across the blade run, which improves cut accuracy and reduces the risk of vibration-related defects. Compatibility with the intended clamping system simplifies setup and protects against improper mounting that can compromise blade life. Optimised tooth geometry and dimensions for faster cutting With 4 TPI (teeth per inch) and set teeth, the tooth configuration is optimised for coarse, aggressive cutting where rapid material removal is prioritised. The 50 mm width and 2.5 mm thickness provide a robust profile that resists deflection on straight and contoured cuts, supporting reliable kerf control. For operators less familiar with TPI, a lower number of teeth per inch yields faster cutting on thicker sections and mixed materials, while the tooth set clears chips effectively to prevent clogging. Contact Metav Werkzeuge today for tailored advice on machine compatibility and to secure the TECWERK band saw blade for Kasto machines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical details Article number: 2000814152NW Product: Machine band saw blade Brand: TECWERK Facts Overall length: 575 mm Width: 50 mm Thickness: 2.5 mm Bore / hole diameter: 10.5 mm Teeth per inch: 4 Packaging unit: 1 Special features Material: HSS bimetal Vacuum-hardened cutting edge Tooth set: set teeth Offset clamping holes for Kasto machines Intended for sawing most materials FAQ What machines is this blade compatible with? The blade is engineered with offset clamping holes and intended specifically for use on Kasto band saw machines; compatibility with other makes is not guaranteed. How does the HSS bimetal construction benefit workshop operations? HSS bimetal provides a hard, wear-resistant cutting edge bonded to a flexible backing, so the blade maintains edge life longer and tolerates bending forces better during prolonged use. What type of cutting is 4 TPI suited for? A 4 TPI tooth count is designed for coarse, high-feed cutting and rapid material removal, making it suitable for thicker sections and general-purpose metal cutting where speed is prioritised. Are the clamping holes standard or specific to a brand? The clamping holes are offset and configured for Kasto machines; this ensures secure mounting on the specified brand but may not match other saw clamping systems. How should blade dimensions influence selection? Width (50 mm) and thickness (2.5 mm) determine stiffness and kerf stability: wider, thicker blades resist deflection and are preferable for straight, robust cutting tasks. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

A vacuum‑hardened HSS bimetal construction combined with set teeth offers long life and versatile cutting across a wide variety of materials; offset clamping holes ensure a secure fit on Kasto band saws. Order the machine saw blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK machine saw blade L575 x B50 x S2.5 mm HSS – 10.5 mm bore, 6 TPI (for Kasto machines) The TECWERK machine saw blade L575 x B50 x S2.5 mm HSS – 10.5 mm bore, 6 TPI is a vacuum‑hardened HSS bimetal band saw blade engineered for robust, general‑purpose cutting on Kasto machines HSS bimetal, vacuum‑hardened blade Compatible with Kasto band saw machines Offset clamping holes for secure mounting 6 TPI set teeth for versatile cutting Durable alloy and heat treatment for extended tool life The HSS bimetal construction combines a wear‑resistant cutting edge with a resilient backing, delivering a balance between longevity and flexibility. Vacuum hardening stabilises the steel structure, reducing the risk of distortion during heat treatment and ensuring consistent tooth geometry over extended use. As a result, the blade maintains cutting accuracy and requires fewer replacements, which supports steady production throughput and lowers unplanned downtime. Stable mounting and machine compatibility that reduce vibration Designed specifically with offset clamping holes for Kasto machines, the blade ensures precise alignment and reliable clamping under load. The construction minimises vibration and promotes a uniform kerf, which helps to protect both the workpiece surface and the saw mechanics. This secure fit is particularly relevant in industrial settings where repeatability and process stability are essential for quality assurance. Cutting geometry suited to mixed‑material workpieces The set teeth arrangement creates a wider kerf that prevents jamming when cutting mixed or contaminated materials. With a tooth spacing of 6 TPI, the blade is configured for medium‑coarse cutting tasks, offering a compromise between fast material removal and a reasonably smooth finish. For workshops handling varied stock — from structural steel to non‑ferrous metals — this geometry enables reliable, versatile performance without frequent blade changes. Clear specification for quick replacement and inventory control The blade’s dimensions — 575 x 50 x 2.5 mm with a 10.5 mm bore — follow a straightforward format for fast identification and replacement. These measurable values simplify stock keeping and make it easier to match existing setups. Where blade selection is critical to process outcomes, these specifications give purchasing and production teams a clear, verifiable basis for procurement and machine setup. For tailored advice on replacing or stocking TECWERK blades for Kasto machines, contact Metav Werkzeuge for fast supply and expert guidance from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814139NW Label: Maschinensägeblatt L575xB50xS2,5mm HSS Loch-D.10,5mm ZpZ 6 Kasto TECWERK Manufacturer: TECWERK Facts Total length: 575 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 10.5 mm Teeth per inch: 6 Packaging unit: 1 Special features Material: HSS bimetal Heat treatment: vacuum‑hardened Tooth form: set teeth Mounting: offset clamping holes Machine compatibility: for Kasto band saw machines only Execution: Kasto FAQ Is this blade suitable for cutting stainless steel? The TECWERK machine saw blade with HSS bimetal construction is specified for cutting a wide range of materials; stainless steel can be cut depending on the specific alloy and cutting parameters, but material‑specific optimisation may be required. Can the blade be fitted to non‑Kasto band saw machines? The blade features offset clamping holes designed for Kasto machines; fitting to other machines is not guaranteed and may require verification of hole pattern and clamping geometry. What does 6 TPI mean for cutting performance? Six teeth per inch indicate a medium‑coarse tooth spacing that balances material removal rate and surface finish, making the blade suitable for varied workshop applications. How does vacuum hardening affect blade behaviour? Vacuum hardening reduces distortion during heat treatment and improves tooth hardness and wear resistance, so the blade holds cutting geometry longer under industrial use. What is the significance of the 10.5 mm bore? The 10.5 mm bore is a mounting dimension necessary to match the machine spindle or carrier; it must correspond to the saw’s hub or adaptor to ensure correct installation. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Robust HSS bimetal construction, vacuum‑hardened blade geometry and compatibility with Kasto machines deliver consistent cutting performance and long service life. Order the blade directly via Metav Werkzeuge or consult the technical advisers for machine‑specific selection support. TECWERK Machine saw blade L600×W50×T2.5 mm – HSS bimetal, 10.5 mm bore, 4 TPI, for Kasto machines A TECWERK Machine saw blade L600×W50×T2.5 mm engineered as a vacuum‑hardened HSS‑bimetal band saw blade for precision metalworking in Kasto band sawing systems. HSS bimetal vacuum-hardened blade 600 mm length with 50 mm cutting width 2.5 mm blade thickness for stability 10.5 mm bore, 4 TPI set teeth for metal Reliable cutting performance for industrial workshops The blade combines HSS bimetal construction with a vacuum‑hardened edge to maintain sharpness under industrial loads. This design reduces tooth breakage and preserves cutting geometry during prolonged series work, ensuring precision cutting and reduced downtime. The robust body and optimised tooth set support steady chip evacuation and consistent kerf width, which benefits repetitive production tasks and improves process reliability. Broad material capability and efficient tooth design With a 4 TPI tooth pitch and set teeth, the saw is tuned for efficient removal of material across a wide spectrum of workpieces. The combination of fine tooth spacing and HSS cutting edges allows clean cuts in non‑ferrous metals and steels while still coping with mixed batches common in contract cutting. The 10.5 mm bore and standardised mounting ensure secure fitment for compatible saw frames and precise concentric runout, supporting repeatable part quality. Built for compatibility, stability and long service life Measuring 600 mm in length, 50 mm cutting width and 2.5 mm thickness, the blade provides a solid balance between flexibility and lateral stiffness for reduced vibration. Intended specifically for Kasto machines, the blade’s specification—hole spacing equal to the stated length and Kasto‑compatible execution—simplifies procurement and installation. The construction targets long tool life, predictable maintenance intervals and fewer unplanned stops, which together support steady production throughput. Contact Metav Werkzeuge in Emmerich for stock confirmation, machine compatibility guidance and ordering support for TECWERK HSS bimetal blades Technical data Article number: 2000814156NW Type: Machine saw blade Manufacturer: TECWERK Material: HSS bimetal Length: 600 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 10.5 mm Tooth pitch: 4 TPI Tooth form: set teeth Compatible with: Kasto machines Packaging unit: 1 Facts Length (mm): 600 Width (mm): 50 Thickness (mm): 2.5 Bore (mm): 10.5 Teeth per inch: 4 Special features Vacuum‑hardened blade geometry Designed for industrial band sawing Set (geschränkt) tooth configuration Length equals hole spacing for Kasto frames Intended for Kasto machines only FAQ What materials can be cut with this TECWERK machine saw blade? The TECWERK machine saw blade with HSS bimetal construction is suitable for a wide range of materials, including various steels and non‑ferrous metals, thanks to its fine tooth pitch and vacuum‑hardened edges. Is the blade compatible with any band saw frame? This saw blade is specified for Kasto machines; the bore and hole spacing match Kasto mounting standards to ensure correct fitment and run‑out. How does the blade’s vacuum hardening affect performance? Vacuum hardening increases edge hardness and wear resistance for the HSS cutting teeth, which extends service life and maintains cutting accuracy under continuous industrial use. What does a 4 TPI tooth pitch mean for cutting? A 4 TPI (teeth per inch) pitch provides a balance between cutting speed and finish, offering efficient material removal while preserving acceptable surface quality for general metal cutting applications. Which SKU identifies this product for ordering? Order reference for this TECWERK machine saw blade: 2000814156NW Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS-bimetal construction and the blade's set-tooth geometry to ensure consistent cutting performance across a wide range of materials; the offset 10.5 mm mounting hole provides secure tensioning for Kasto systems, reducing vibration and downtime. Order the machine saw blade directly via Metav Werkzeuge or ask our consultants if needed. Machine saw blade L600 x B50 x S2.5 mm HSS – vacuum-hardened, 6 TPI (TECWERK) The Machine saw blade L600 x B50 x S2.5 mm HSS is a vacuum-hardened HSS-bimetal machine saw blade designed for versatile, heavy-duty cutting on compatible Kasto band saw machines HSS bimetal construction for high durability Vacuum-hardened for cutting most materials Offset 10.5 mm mounting hole for Kasto machines Reliable cutting across many materials The blade combines HSS-bimetal construction with a vacuum-hardening process to deliver extended edge life and reliable performance when sawing a broad spectrum of workpieces. The coarse tooth pitch of 6 TPI (teeth per inch) and set-tooth geometry allow fast stock removal while maintaining acceptable surface finish on medium and large cross-sections. For workshops that process varied materials, this geometry reduces the need for multiple blade types and helps maintain steady throughput on suitable machines. Secure fit and stable operation on Kasto systems Compatibility is tailored to Kasto tensioning systems: the blade features offset tensioning holes with a 10.5 mm mounting hole, ensuring correct positioning and consistent tensioning on Kasto machines. Proper tension and correct hole alignment reduce vibration and improve cut accuracy over long runs. When mounted and tensioned as specified by the machine maker, the blade’s 50 mm width and 2.5 mm thickness contribute to lateral stability and resistance to twisting under load. Robust dimensions for predictable performance With a nominal length of 600 mm, a width of 50 mm and a thickness of 2.5 mm, this blade is dimensioned to balance stiffness and cutting capacity on compatible band saw frames. The set teeth minimise binding and help evacuate chips efficiently, which is particularly beneficial during prolonged cuts or when working with tougher alloys. The HSS-bimetal construction also supports repeated re-sharpening or reconditioning where industrial practice permits, extending the serviceable life of the blade and lowering long-term tooling costs. Contact Metav Werkzeuge for tailored advice on TECWERK machine saw blades and to confirm suitability for specific Kasto models — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814509NW Label: Maschinensägeblatt L600xB50xS2,5mm HSS Loch-D.10,5mm ZpZ 6 Kasto TECWERK Manufacturer: TECWERK Facts Total length: 600 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 10.5 mm Teeth per inch: 6 Special features Material: HSS-bimetal Vacuum-hardened Teeth: set (geschränkt) Offset tensioning holes for Kasto machines only Packaging unit: 1 FAQ What materials can this blade cut effectively? The TECWERK machine saw blade with HSS-bimetal construction and vacuum-hardening is suitable for cutting a wide range of materials; its geometry and HSS edge make it effective on typical industrial steels and general workshop materials. Is the blade compatible with all band saw machines? This blade is designed with offset 10.5 mm mounting holes specifically for Kasto-type machines and is intended for use on those systems; compatibility with other machines cannot be guaranteed. How does the 6 TPI tooth pitch affect cutting? A 6 TPI pitch offers faster material removal and is well suited to medium-to-large section cutting, balancing speed and finish for common workshop applications. Can the blade be re-sharpened or reconditioned? The HSS-bimetal construction supports professional re-sharpening and reconditioning practices where feasible, extending the blade’s operational life when managed according to industrial reconditioning standards. What measures improve blade life during operation? Correct mounting on a compatible Kasto frame, consistent tensioning via the offset holes, and appropriate feed rates will reduce wear and vibration, helping the blade maintain cutting performance. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction combined with a 13 mm centre bore and 6 TPI set teeth for reliable, fast material removal in industrial workshops — order the blade directly via Metav Werkzeuge or consult the Metav specialists for specification support. Machine saw blade L600×50×2.5 mm (HSS bimetal) – 13 mm bore, 6 TPI by TECWERK A Machine saw blade L600×50×2.5 mm (HSS bimetal) designed as a high-performance machine blade for workshop and industrial band-saw applications, offering robust tooth life and stable cutting behaviour across a wide range of tasks Vacuum-hardened HSS bimetal construction 600 mm length for standard machine frames 13 mm centre bore for common arbors 6 TPI set teeth for versatile cutting High-performance cutting with proven blade technology The blade combines HSS bimetal tooth edges welded to a flexible backing, delivering a balance of wear resistance and shock tolerance that benefits continuous production. Vacuum-hardened teeth increase hardness and edge retention, reducing the need for frequent regrinding. The 6 TPI tooth pitch (six teeth per inch) provides an effective compromise between cutting speed and surface quality, making the tool suitable for general-purpose sawing tasks. This configuration enables consistent feed rates and predictable chip evacuation, which directly supports efficient cycle times on machine saws. Durability and operational stability for less downtime A 50 mm blade width and 2.5 mm plate thickness give the tool lateral stability and resistance to vibration during through-feed cutting, so there is less risk of blade drift and premature wear. The set teeth arrangement reduces binding and helps clear the kerf, improving cutting performance in mixed-material runs. Thanks to the vacuum-hardening process, tooth life is extended, which lowers tool-change frequency and contributes to a more favourable total cost of ownership in repetitive production environments. The robust construction is suited to demanding workshop use where reliability matters. Practical integration and workshop advantages The 13 mm centre bore matches common arbor sizes, while the blade length corresponds to standard machine hole spacing, simplifying replacement and installation. Supplied as a single unit per package, the blade is ready for immediate use with machines engineered for 600 mm saw blades. Technical inquiries and confirmation of machine compatibility are supported by Metav's product specialists; Metav Werkzeuge combines a broad product range with a local stock and distribution model that keeps workshops supplied and reduces lead times. For complex setups, supplementary specification sheets can be provided on request. For reliable, continuous cutting choose the TECWERK machine saw blade and contact Metav Werkzeuge — Manufacturer-grade stock and advice available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number (SKU): 2000814141NW Label: Maschinensägeblatt L600xB50xS2,5mm HSS Loch-D.13mm ZpZ 6 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Facts Length: 600 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 13 mm Teeth per inch: 6 TPI Special features Material: HSS-bimetal Tooth design: set teeth (geschränkt) Heat treatment: vacuum-hardened Intended use note: general-purpose machine sawing FAQ What materials can this saw blade cut effectively? The Machine saw blade L600×50×2.5 mm (HSS bimetal) by TECWERK is designed for general-purpose sawing and, owing to its HSS bimetal teeth and vacuum-hardening, performs well across a broad range of workshop materials; for specific hard-to-cut alloys, consult Metav for confirmation. Is the 13 mm bore compatible with standard arbors? Yes — the 13 mm centre bore on the TECWERK machine saw blade matches common arbor sizes used in many band-saw machines, but machine-specific checks are recommended before installation. How does 6 TPI affect cutting performance? Six teeth per inch (6 TPI) on this blade provide a compromise between rapid material removal and acceptable surface finish, making it suitable for varied workpieces and progressive feed rates. Can this blade be re-sharpened, or is it disposable? The HSS-bimetal construction of the TECWERK blade allows professional regrinding of the teeth to extend service life; vacuum-hardening enhances edge stability, enabling multiple regrinds under proper workshop procedures. What should be checked before fitting the blade to a machine? Confirm the machine’s blade length and bore compatibility with the 600 mm blade and 13 mm centre hole; also verify recommended feed and speed limits for HSS bimetal blades in the machine manual. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS bimetal construction, vacuum hardening and a 13 mm bore for reliable machine mounting; this blade delivers robust, fast cutting across varied materials while reducing downtime—order the blade directly via Metav Werkzeuge or consult our advisors for compatibility guidance. Machine saw blade L600 x W50 x T2.5 mm HSS, 13 mm bore, 4 TPI – TECWERK The Machine saw blade L600 x W50 x T2.5 mm HSS is a vacuum-hardened, bimetal band blade designed for industrial and workshop machines to cut a wide range of materials with consistent performance HSS bimetal, vacuum-hardened construction 600 x 50 x 2.5 mm working dimensions 13 mm bore for machine mounting Set teeth, 4 teeth per inch (4 TPI) Consistent, high-performance cutting for mixed materials The vacuum-hardened HSS bimetal construction combines a high-speed steel cutting edge with a flexible backing, producing a blade that resists heat and wear while maintaining edge stability. The set teeth profile and 4 TPI (teeth per inch) offer a balance between cutting speed and chip clearance, making the blade suitable for general-purpose sawing where efficient material removal is required. This results in fewer blade changes and more productive machine time, which supports an efficient production flow and lowers operating costs. Quick integration with standard workshop machines With clear working dimensions of 600 x 50 x 2.5 mm and a 13 mm bore, the blade is ready for standard industrial mounts; the specified length corresponds to the mounting hole spacing, simplifying selection for compatible band or circular saw assemblies. The moderate thickness ensures sufficient stiffness for guided cutting while allowing the blade to run smoothly in a range of machine frames. These measurable attributes enable straightforward planning of replacements and spare-part inventories, reducing setup time and avoiding unnecessary machine downtime. Reliability, lifespan and workshop suitability Designed to tackle a broad spectrum of materials, the blade’s HSS bimetal composition and vacuum hardening contribute to improved wear resistance and a longer service life compared with plain carbon alternatives. For workshops seeking a cost-effective cutting solution, the blade delivers reliable cuts across varied tasks without the need for specialised consumables. The robust construction also supports repeatable results in batch production and maintenance environments, helping teams meet quality demands with dependable tool performance. Contact Metav Werkzeuge for precise machine compatibility checks and procurement of the TECWERK machine saw blade—support and supply are available directly from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000814154NW Product: Machine saw blade L600 x W50 x T2.5 mm HSS Manufacturer: TECWERK Packaging unit: 1 Facts Length: 600 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 13 mm Teeth: 4 TPI Special features Material: HSS bimetal Teeth type: set (geschränkt) Vacuum-hardened Length corresponds to hole spacing Designed for cutting a wide range of materials FAQ What does 4 TPI mean and how does it affect cutting? The 4 TPI rating indicates four teeth per inch, which on the TECWERK machine saw blade gives relatively coarse teeth for fast cutting and effective chip removal, suitable for general-purpose sawing tasks. Which machines is this saw blade compatible with? Compatibility depends on the machine’s blade length, width and bore. The Machine saw blade L600 x W50 x T2.5 mm HSS fits mounts accepting a 600 mm blade length and a 13 mm bore; verify the hole spacing and mounting system before purchase. Can the blade cut different materials without special coatings? Yes—the HSS bimetal, vacuum-hardened design of this TECWERK blade is intended for cutting a wide range of materials; application specifics depend on feed rate and machine setup. How does vacuum hardening benefit blade life? Vacuum hardening increases the hardness and heat resistance of the cutting edge without compromising the backing’s toughness, so the TECWERK blade maintains edge integrity under higher temperatures and extended use. Is blade re-sharpening an option for this product? Re-sharpening depends on the degree of wear and the machine used; the HSS bimetal edge can often be reconditioned if the backing and tooth geometry remain intact. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the vacuum‑hardened HSS bimetal construction together with a 2.5 mm body for stable, long‑lasting cutting performance, and benefit from the blade’s offset mounting holes for secure fitting on Kasto band saws; order the blade via Metav Werkzeuge or request technical advice if required. TECWERK Machine saw blade L650 x B55 x S2.5 mm, HSS, 6 TPI (Kasto) The TECWERK Machine saw blade L650 x B55 x S2.5 mm HSS is a vacuum‑hardened, bimetal band saw blade engineered for general‑purpose cutting on Kasto band saw machines. Vacuum-hardened HSS bimetal construction 6 TPI with set teeth for universal cutting Offset clamping holes for Kasto machines Reliable, universal cutting for mixed workshops The vacuum‑hardened HSS bimetal construction provides a balanced combination of toughness and cutting edge retention, making the blade suitable for a wide spectrum of materials. The 6 TPI tooth pitch with set teeth delivers a compromise between cutting speed and finish, which is particularly useful when a workshop needs a single blade to handle varied jobs. Because the manufacturing process stabilises the cutting edge, this blade reduces the frequency of blade changes and supports steady production flow, contributing to operational efficiency and lower machine downtime. Stable geometry and rigidity for precise cuts With a length of 650 mm, a width of 55 mm and a thickness of 2.5 mm, the blade offers the stiffness required for consistent tracking and reduced vibration under load. The relatively robust 2.5 mm section helps maintain straight kerf lines during through‑cuts and repetitive work, while the bimetal backing absorbs mechanical stresses that would otherwise accelerate wear. In practice, this means cleaner cut surfaces and fewer secondary operations, which translates into time savings on repeat production runs. Secure mounting and Kasto compatibility This version is supplied with offset clamping holes and a 10.5 mm bore diameter configured specifically for Kasto band saw machines. The tailored hole pattern ensures correct seating and reliable drive engagement, which is essential for maintaining blade tension and runout control. Because the blade is specified for Kasto equipment, installation is straightforward on compatible machines, reducing set‑up time and ensuring that the saw blade runs true from the first cut. Maintenance and workshop integration The bimetal design simplifies maintenance cycles: the harder cutting edge resists premature dulling, while the backing material allows for controlled flexibility. Operators benefit from predictable re‑sharpening intervals and straightforward visual inspection of the cutting edge. When integrated into a central workshop procurement strategy, this blade supports continuity of supply and predictable performance, making it suitable for small industrial shops and larger production cells alike. For dependable supply and application guidance for the TECWERK machine saw blade, contact Metav Werkzeuge—technical advice and order handling from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 2000814511NW Product type: Machine saw blade Manufacturer: TECWERK Material: HSS bimetal Execution: Kasto Facts Total length: 650 mm Width: 55 mm Thickness: 2.5 mm Bore diameter: 10.5 mm Tooth count: 6 TPI Special features Vacuum‑hardened cutting edge Set (staggered) teeth Offset clamping holes for Kasto machines Packaging unit: 1 FAQ Is this blade suitable for non‑ferrous metals and steels? The blade’s HSS bimetal construction and 6 TPI tooth pitch make it suitable for a broad range of materials, including various steels and non‑ferrous metals; material‑specific feeds and speeds should be observed. Can the blade be used on machines other than Kasto models? This specific version is produced with offset clamping holes configured for Kasto machines, so compatibility with other brands cannot be guaranteed without verifying hole pattern and mounting requirements. What does 6 TPI mean in practice for cutting performance? A 6 TPI tooth pitch balances cutting speed and finish, offering reasonable material removal with acceptable surface quality for general workshop applications. What is the bore diameter and why is it important? The blade has a 10.5 mm bore diameter; correct bore size ensures secure mounting on the machine’s drive and guides, which is critical for stable operation. How does vacuum hardening affect blade life? Vacuum hardening increases edge hardness and heat treatment consistency, which helps the cutting edge retain sharpness longer and reduces wear under normal cutting conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the vacuum-hardened HSS bimetal construction, the 650 mm working length and the 13 mm bore for reliable, heavy-duty cutting. Order the blade directly via Metav Werkzeuge or contact our consultants for specification support. Machine saw blade L650×50×2.5 mm, HSS, Hole Ø13 mm, 4 TPI – TECWERK A Machine saw blade L650×50×2.5 mm engineered for robust, high-speed material removal in production workshops and industrial saw benches HSS bimetal, vacuum-hardened for durability 650 mm length for standard machine compatibility 50 mm width with 2.5 mm thickness 13 mm bore, 4 TPI for coarse cutting Built for continuous productivity and long tool life The HSS bimetal construction, combined with vacuum hardening, ensures a blade that resists premature wear and retains its edge under sustained loads. The hardened cutting edge provides consistent performance across repeated cycles, reducing downtime for blade changes and sharpening. For industrial environments where reliable throughput is essential, this design translates into predictable cutting life and fewer interruptions to the production flow. The specification therefore supports cost-effective operation by lowering maintenance frequency while maintaining cutting quality. Coarse tooth geometry for fast, aggressive cuts With a coarse pitch of 4 TPI and a staggered set tooth pattern, the blade removes material quickly and clears chips effectively, which speeds cutting on thicker sections and mixed-material batches. The geometry is optimised for aggressive feed rates without excessive vibration, giving stable cut lines and reduced kerf clogging. This tooth configuration is particularly advantageous for operations that prioritise throughput and fast cycle times, as it balances cutting speed with acceptable surface finish for downstream processing. Compatibility and simple integration into saw benches The 13 mm bore and overall length of 650 mm match common machine interfaces, simplifying installation and replacement. The blade’s 50 mm width and 2.5 mm thickness contribute to lateral stability during cutting, helping maintain straight cuts under load. The note that the overall length corresponds to the hole spacing supports straightforward alignment in many standard pulley and arbor arrangements. These dimensional features allow the blade to be fitted with minimal setup time, reducing machine downtime during tool swaps. Versatile application and workshop practicality Designed as a vacuum-hardened machine saw blade, this item is suitable for cutting a wide range of materials encountered in general workshop and maintenance work. Supplied as a single unit, the blade is ready for immediate fitting and use, and its robust construction supports frequent, heavy use. For purchasers seeking a balance between aggressive cutting capability and durable edge retention, this blade offers a dependable option that fits conventional sawing systems and supports efficient production routines. Contact Metav Werkzeuge for personalised technical advice on TECWERK machine saw blades from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 for supply and compatibility guidance Technical data Article number: 2000814157NW Brand: TECWERK Product type: Machine saw blade Label: Maschinensägeblatt L650xB50xS2,5mm HSS Loch-D.13mm ZpZ 4 TECWERK Facts Overall length: 650 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 13 mm Teeth: 4 TPI Special features Material: HSS bimetal Vacuum-hardened cutting edge Tooth set: staggered (geschränkt) Length equals hole spacing Packaging unit: 1 FAQ What machines is this blade compatible with? Compatibility depends on arbor and pulley spacing; the Machine saw blade L650×50×2.5 mm (TECWERK, SKU 2000814157NW) is designed for common saw benches with a 13 mm bore and 650 mm length standard. Which materials can be cut with this blade? The TECWERK machine saw blade is vacuum-hardened and intended for a wide range of materials encountered in workshop use, offering a balance of cutting speed and edge life. How does the 4 TPI tooth count affect cutting performance? A coarse 4 TPI pitch provides fast, aggressive material removal and efficient chip evacuation, making the blade suitable for thicker sections and general-purpose cutting tasks. Is the blade simple to replace and align? Yes. The 13 mm bore and length matching the hole spacing facilitate straightforward installation and alignment in standard machines, reducing changeover time. What makes the HSS bimetal construction advantageous? HSS bimetal combines a hardened cutting edge with a tougher backing, resulting in improved wear resistance and fracture toughness for longer service life under industrial conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum‑hardened HSS bimetal construction combined with staggered 4 tpi teeth for long service life and versatile cutting across most workshop materials; order the blade directly via Metav Werkzeuge or consult our advisors for fit and supply. The precise 650 mm × 55 mm × 2.5 mm dimensions and the 10.5 mm bore ensure reliable installation in compatible Kasto machines. TECWERK machine saw blade L650 x W55 x T2.5 mm – HSS bimetal, 4 tpi, Kasto execution The TECWERK machine saw blade L650 x W55 x T2.5 mm is a vacuum‑hardened HSS bimetal band saw blade designed for robust, general‑purpose sawing in industrial and workshop settings HSS bimetal construction for extended life Vacuum‑hardened for consistent cutting performance Staggered teeth, 4 tpi for versatile material cutting Offset clamping holes for Kasto machine compatibility Durable cutting performance for mixed workshop materials The HSS bimetal construction combines a hard, wear‑resistant cutting edge with a resilient backing strip to deliver prolonged service life under continuous use. The vacuum‑hardened treatment increases toughness and improves edge retention, which translates into fewer blade changes and lower process interruptions. This performance profile supports sustained throughput in small to medium production runs and maintenance shops where reliability is a priority. Precise dimensions and machine compatibility reduce setup time With a total length of 650 mm, width of 55 mm and thickness of 2.5 mm, plus a central 10.5 mm bore, the blade is produced to fit machines that accept these dimensions. The offset clamping holes are configured specifically for Kasto machines, ensuring correct alignment and safe clamping without modification. Specified fit reduces trial‑and‑error during installation and helps maintain machine uptime. Cutting geometry that balances speed and finish The staggered teeth form with 4 tpi (teeth per inch) offers a compromise between cutting speed and surface finish, making the blade suitable for a broad range of materials. Coarser tooth pitch like 4 tpi is effective at rapid chip removal when cutting non‑ferrous metals, structural steel and general workshop stock, while the tooth set limits binding and overheating. Together with the hard HSS edge, this geometry supports efficient material removal and consistent kerf performance. Practical handling, safety and workshop benefits Standard packaging and a single‑piece supply unit simplify inventory management for service departments and small production shops. The blade’s combination of material, heat treatment and tooth configuration reduces the frequency of replacement, lowering total operating costs and waste. For operators seeking dependable blades for band saws configured for Kasto clamping systems, this item offers a pragmatic balance of longevity and cutting versatility. For enquiries about suitability for specific materials or to arrange supply of the TECWERK machine saw blade, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s advisors will confirm compatibility and delivery options. Technical data Article number: 2000814510NW Label: Machine saw blade L650 x W55 x T2.5 mm HSS Bore Ø10.5 mm 4 tpi Kasto TECWERK Type: Machine saw blade Manufacturer: TECWERK Execution: Kasto Material: HSS‑bimetal Total length: 650 mm Width: 55 mm Thickness: 2.5 mm Bore diameter: 10.5 mm Teeth per inch: 4 Tooth form: staggered Packaging unit: 1 Facts Length: 650 mm Width: 55 mm Thickness: 2.5 mm Bore: 10.5 mm Teeth per inch: 4 Special features Vacuum‑hardened HSS edge Offset clamping holes for Kasto machines only Suitable for sawing almost any material in workshop environments Staggered tooth set for improved chip clearance FAQ Which machines is this blade compatible with? The TECWERK machine saw blade L650 x W55 x T2.5 mm is produced with offset clamping holes specifically for Kasto machines and is intended for use only in compatible Kasto band saw models. What does 4 tpi mean for cutting performance? A 4 tpi tooth pitch on the TECWERK blade indicates four teeth per inch, providing faster material removal and good chip evacuation for general workshop materials while maintaining acceptable surface finish. Can this blade cut hardened or exotic materials? The blade’s HSS‑bimetal construction and vacuum hardening improve durability, and the specification notes suitability for sawing almost any material; for highly specialised alloys or hardened steels, refer to material‑specific cutting data before selection. How should the blade be mounted for safe operation? Mounting must follow the Kasto machine’s instructions; the 10.5 mm bore and offset clamping holes ensure correct positioning on compatible saws, and correct tensioning and alignment are essential for safe, accurate cutting. What is the expected benefit of vacuum hardening? Vacuum hardening enhances the HSS cutting edge by improving hardness and resistance to wear, which results in longer blade life and steadier cutting performance under continuous use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the vacuum-hardened HSS bimetal construction and set-tooth geometry for consistent, long-lasting cuts; the Kasto-compatible offset mounting holes ensure immediate fit on Kasto bandsaw systems — order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Machine saw blade L700×50×2.5 mm, HSS bimetal, hole Ø10.5 mm (6 TPI) – TECWERK A machine saw blade L700×50×2.5 mm for industrial bandsaw applications, vacuum-hardened HSS bimetal designed for cutting a broad spectrum of materials and configured for direct fit on Kasto machines Vacuum-hardened HSS bimetal construction Compatible with Kasto machines only 6 TPI set-tooth geometry for versatile cutting Ø10.5 mm offset mounting holes Consistent performance and extended service life for production use The vacuum-hardened HSS bimetal composition delivers a balance of toughness and abrasion resistance that maintains a sharp cutting edge under continuous operation. Vacuum hardening refines the microstructure, which improves wear resistance and reduces the frequency of blade changes. For production environments that demand reliability and predictable tool life, this industrial bandsaw blade offers consistent cuts and fewer interruptions to workflow. Immediate integration with Kasto systems reduces downtime Designed with offset mounting holes and a bore of Ø10.5 mm, the blade integrates directly into Kasto bandsaw fixtures without modification. The preconfigured mounting pattern and standardised dimensions — 700 mm length, 50 mm width, 2.5 mm thickness — allow straightforward replacement, lowering setup time. The set-tooth (geschränkt) layout ensures chip clearance and smooth feed, supporting continuous operation on compatible machines. Versatility across materials and clear technical benefits With 6 TPI (teeth per inch) and a set tooth geometry, the blade suits a wide range of materials from non-ferrous metals to general structural steels. The bimetal design couples a wear-resistant cutting edge with a flexible backing strip, which improves resistance to fracture while enabling controlled cutting performance. For less technical stakeholders: HSS bimetal means a hard, durable cutting edge welded to a tougher support body, combining longevity with resilience. Practical advantages for workshop and industrial use The blade’s geometry and material selection reduce the need for frequent resharpening, translating into lower operating interruptions and improved throughput. The set teeth encourage efficient chip evacuation, which helps to avoid clogging on mixed-material batches. Packaged as a single unit for replacement, the blade supports predictable inventory management and straightforward stock control in maintenance and procurement processes. For specification checks, machine compatibility or bulk supply options for TECWERK bandsaw blades, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to discuss requirements and secure reliable delivery. Technical data SKU: 2000814143NW Manufacturer: TECWERK Product type: Machine saw blade Execution: Kasto Dimensions & cutting data Overall length: 700 mm Width: 50 mm Thickness: 2.5 mm Hole diameter: 10.5 mm Teeth per inch: 6 TPI Tooth set: set teeth (geschränkt) Materials & special features Material: HSS bimetal (vacuum-hardened) Offset mounting holes for Kasto machines Suitable for cutting a wide range of materials Packaged unit: 1 FAQ Is this blade compatible with non-Kasto machines? The blade is configured with offset mounting holes specifically for Kasto machines; alternative machine interfaces will require verification before use. What materials can this HSS bimetal blade cut reliably? The TECWERK machine saw blade is suitable for a broad spectrum of materials thanks to its HSS bimetal construction and 6 TPI geometry, including various steels and non-ferrous metals. How does the vacuum hardening affect blade life? Vacuum hardening refines the blade’s microstructure, improving wear resistance and extending the service life of the cutting edge under continuous operation. What does 6 TPI mean for cutting performance? Six teeth per inch offers a compromise between metal removal rate and finish quality, making the blade versatile for mixed workloads where efficient cutting and acceptable surface finish are required. Which dimensions are critical when ordering a replacement blade? Confirm overall length (700 mm), width (50 mm), thickness (2.5 mm), hole diameter (10.5 mm) and tooth pitch (6 TPI) to ensure correct fit and performance. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the blade's HSS bimetal construction and vacuum-hardening for long service life, combined with a coarse 4 TPI set-tooth geometry that expedites cuts in a wide range of materials; order directly via Metav Werkzeuge or consult our specialists for suitability with Kasto machinery. Machine saw blade L700 x W50 x T2.5 mm, HSS bimetal, Ø10.5 mm hole – TECWERK The Machine saw blade L700 x W50 x T2.5 mm HSS is a vacuum-hardened band saw blade designed for robust, general-purpose cutting in industrial and workshop sawrooms, supplied in a Kasto-compatible execution. HSS bimetal construction for long life Vacuum-hardened blade for resistance Set teeth, coarse pitch 4 TPI for fast cutting Offset clamping holes for Kasto machines only Reliable cutting performance for diverse materials The vacuum-hardened HSS bimetal edge provides a balance between toughness and wear resistance, allowing the blade to maintain a sharp cutting profile under continuous use. Vacuum hardening reduces thermal distortion during production, which results in a more consistent tooth geometry and a predictable service life. This construction suits a broad spectrum of applications where durability and repeatable results are priorities, particularly in metalworking and mixed-material workshops. Precision fit and machine compatibility for uninterrupted operation With overall dimensions of 700 mm length, 50 mm width and 2.5 mm thickness, plus a centre hole of 10.5 mm, the blade is engineered for a precise mechanical fit on compatible saw frames. The set (geschränkt) tooth configuration and coarse 4 TPI pitch are chosen to remove material quickly while reducing the risk of clogging on thicker sections. Note that the execution includes offset clamping holes specifically arranged for Kasto machines; this ensures secure mounting and reduces the need for additional adapters, but also means compatibility is limited to the specified machine family. Productivity and lifetime value in the workshop The combination of the coarse tooth pitch and set teeth makes this blade efficient for fast cuts and reduced cycle times on general fabrication tasks. Fewer interruptions for blade changes or regrinding translate into higher net throughput on the shop floor. Sourcing through a reliable partner ensures consistent supply: Metav Werkzeuge’s Emmerich location acts as a quality filter for the European market, providing a broad product range and dependable delivery to sustain ongoing production requirements. For reliable supply of genuine TECWERK vacuum-hardened HSS saw blades and expert advice on integration with Kasto machinery, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange purchase and technical consultation Technical data Article number: 2000814512NW Product type: Machine saw blade Measurements Length: 700 mm Width: 50 mm Thickness: 2.5 mm Hole diameter: 10.5 mm Tooth pitch: 4 TPI Special features Material: HSS bimetal Vacuum-hardened manufacturing Tooth set: set (geschränkt) Execution: Kasto (offset clamping holes) For machine: only for Kasto machines FAQ Which materials can this band saw blade cut effectively? The Machine saw blade L700 x W50 x T2.5 mm HSS (TECWERK) is designed for versatile cutting tasks and, thanks to its HSS bimetal composition and vacuum-hardening, performs well on a broad range of metals and mixed materials commonly encountered in workshops. Is the blade compatible with non-Kasto saws? The blade is supplied in a Kasto-specific execution with offset clamping holes, so it is intended for Kasto machines; compatibility with other frames is not guaranteed without appropriate adapters. What does the 4 TPI tooth specification mean in practice? A coarse 4 TPI (teeth per inch) pitch delivers faster material removal and is suited to thicker sections and general-purpose cutting where speed is prioritised over an ultra-fine surface finish. How does vacuum hardening benefit workshop use? Vacuum hardening reduces distortion during heat treatment, producing a more uniform tooth geometry and enhanced wear resistance—this improves service life and cutting consistency for the TECWERK blade. What are the critical dimensions to check before ordering? Confirm the blade length 700 mm, width 50 mm, thickness 2.5 mm and centre hole 10.5 mm, and ensure the Kasto-style offset clamping hole pattern matches the saw frame. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund