Take advantage of a robust HSS bimetal construction, vacuum‑hardened for extended life, combined with a compact 300 × 25 × 1.6 mm profile and an 8 tpi tooth pitch for efficient material removal; order the blade directly via Metav Werkzeuge or request advice from the consultants if technical clarification is required Machine saw blade L300×B25×S1.6 mm, HSS bimetal, 8.5 mm hole – TECWERK A TECWERK machine saw blade designed for versatile industrial cutting, offering durable HSS bimetal construction and a standard 8.5 mm arbor for quick integration HSS bimetal construction Vacuum-hardened for longer life 8 tpi for fast material removal 8.5 mm arbor hole for standard saws Reliable cutting performance and long service life The combination of HSS bimetal construction and a vacuum‑hardening process delivers a blade that maintains edge stability under continuous use. The blade’s 1.6 mm thickness and narrow 25 mm width reduce kerf loss while supporting straight, repeatable cuts; this results in less material waste and lower rework rates in high‑throughput environments. The bimetal design bonds high-speed steel cutting edges to a resilient backing, providing a cost‑effective balance between toughness and wear resistance ideal for production workshops. Versatility across a wide range of materials With 8 tpi and set teeth, the geometry of the saw blade is optimised for efficient chip removal and controlled cutting speeds, making it suitable for a broad spectrum of applications. The manufacturer notes its capability for sawing "almost any material", which is realised through the combination of tooth pitch and bimetal chemistry; this enables the blade to cope with mixed batches or changing workpieces without frequent blade swaps. The moderate tooth count supports faster feeds while retaining acceptable surface quality for many industrial uses. Easy integration into production workflows The 300 mm length and 8.5 mm arbor bore match common saw fixtures, allowing straightforward replacement and reduced machine downtime. The compact form factor and standard mounting dimensions make the blade compatible with many bench and machine saws used in workshops and light industrial settings. As a result, procurement of this TECWERK blade can simplify inventory management and support a leaner tooling strategy by reducing the need for multiple specialised blades. For robust, versatile cutting choose the TECWERK HSS bimetal machine saw blade and contact Metav Werkzeuge for supply and tailored technical advice from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 2000814481NW Product type: Machine saw blade Manufacturer: TECWERK Core dimensions Length: 300 mm Width: 25 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth: 8 tpi Special features Material: HSS-bimetal Tooth form: Set (alternate) Vacuum-hardened blade Packaging unit: 1 FAQ What materials can this saw blade cut effectively? The TECWERK machine saw blade is specified as suitable for sawing almost any material thanks to its HSS bimetal design and tooth geometry, making it a versatile choice for mixed production tasks. What does 8 tpi mean for cutting performance? An 8 tpi (teeth per inch) configuration offers a balance between fast material removal and acceptable finish; on the TECWERK blade this supports efficient throughput with controlled chip formation. Is the 8.5 mm bore compatible with common machines? The 8.5 mm arbor hole on the TECWERK blade matches many standard saw mounts, allowing quick installation on compatible bench and machine saws. How does vacuum hardening benefit the blade? Vacuum hardening increases edge wear resistance and dimensional stability of the cutting teeth, so the TECWERK blade holds a sharper profile for longer under continuous operation. What maintenance extends the blade life? Regular cleaning of the teeth and correct feed rates minimise heat and build‑up; when worn, the TECWERK blade should be replaced to maintain cut quality and machine safety. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS bimetal construction and vacuum-hardened finish for long service life, combined with the blade's 10 TPI set teeth for versatile cutting across many materials; order the TECWERK blade directly via Metav Werkzeuge or consult our specialists for selection advice. Machine saw blade L300 x B25 x S1.6 mm – HSS bimetal, 8.5 mm bore, 10 TPI (TECWERK) The machine saw blade L300 x B25 x S1.6 mm from TECWERK is a precision cutting blade for industrial and workshop machines, engineered for robust, multi-material sawing applications. HSS bimetal construction for high durability Vacuum-hardened for extended blade life 10 TPI set teeth for versatile cutting performance Consistent performance across many materials The HSS bimetal composition combines a tough backing with a high-speed steel cutting edge to deliver reliable wear resistance and consistent edge retention. The vacuum-hardened treatment increases hardness without sacrificing flexibility, so the blade keeps its geometry under load. This combination makes the blade suitable for sawing a wide range of substrates, from softer non-ferrous metals to harder tool steels, with predictable results and reduced frequency of blade changes. The industrial finish contributes to steady performance during repeated production cycles. Precision geometry that improves cut quality and throughput The blade's 10 TPI tooth pitch and set teeth geometry balance chip clearance and cutting speed, yielding controlled feed rates and cleaner kerfs. With a length of 300 mm, width of 25 mm and thickness of 1.6 mm, the profile provides a stable cut line while limiting vibration on standard machine setups. The central 8.5 mm bore ensures secure mounting and proper alignment, reducing runout and improving repeatability. These dimensional details translate into smoother operation, less rework and better part consistency in daily workshop use. Engineered for workshop efficiency and lower operating costs Built for continuous use, the blade reduces downtime through enhanced edge life and predictable maintenance intervals. The robust construction minimises frequent replacements and supports higher effective cutting time per blade, improving overall workshop efficiency. For procurement teams and workshop managers, this means fewer interruptions, simplified inventory management and a dependable consumable choice for mixed-material jobs. The design emphasises practical benefits: durability, steady cutting performance and compatibility with common mounting standards. Contact Metav Werkzeuge for personalised advice on integrating the TECWERK machine saw blade into production and to secure reliable supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814120NW Manufacturer: TECWERK Product type: Machine saw blade SKU: 2000814120NW Facts Length: 300 mm Width: 25 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth: 10 TPI Packaging unit: 1 Special features Material: HSS bimetal Vacuum-hardened blade Set teeth (geschränkt) Length corresponds to hole spacing Suited for cutting almost any material FAQ What materials can this blade cut effectively? The TECWERK machine saw blade L300 x B25 x S1.6 mm (SKU 2000814120NW) is designed to cut a broad range of materials thanks to its HSS bimetal composition and vacuum-hardening; it performs well on non-ferrous metals, steels and a variety of workshop substrates. How does the 10 TPI specification affect cutting? A 10 TPI tooth pitch on this blade provides a compromise between chip removal and surface finish, making the blade suitable for general-purpose cutting where a balance of speed and kerf quality is required. Is the 8.5 mm bore compatible with most machines? The 8.5 mm bore is a common mounting size; the TECWERK saw blade's bore ensures secure fitting on machines designed for blades with that central hole diameter. What advantage does vacuum-hardening bring to the blade? Vacuum-hardening increases edge hardness while maintaining structural flexibility, so the TECWERK blade sustains sharper cutting edges for longer and resists premature wear under repeated use. How many blades are supplied per package? The product is supplied as a single unit; the packaging unit for the blade is 1. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust, HSS bimetal construction and vacuum hardening for long blade life, combined with a universal 14 TPI tooth form that handles a wide range of materials reliably; order directly via Metav Werkzeuge or ask the consultants for application advice. Machine saw blade L300 x W25 x T1.6 mm – HSS bimetal, 8.5 mm bore – TECWERK The machine saw blade L300 x W25 x T1.6 mm is a vacuum-hardened HSS bimetal blade designed for machine sawing across diverse workshop and light industrial applications HSS bimetal, vacuum-hardened construction 300 mm length, 25 mm width, 1.6 mm thickness 8.5 mm mounting hole for standard arbors 14 TPI with set teeth for universal cutting Consistent cutting performance for mixed materials A vacuum-hardened HSS bimetal design provides a balanced combination of toughness and edge retention, making this blade well suited to repetitive machine sawing tasks. The 14 TPI tooth configuration with set teeth ensures efficient chip evacuation and reduces the risk of clogging when cutting through different materials. This delivers reliable cycle times and reduces downtime caused by frequent blade changes, which is an advantage in busy production environments where process stability matters. Simple mounting and dependable dimensions for quick changeover Clear, standard dimensions allow fast and precise fitting: 300 mm overall length, 25 mm width and 1.6 mm thickness, with an 8.5 mm mounting bore that matches common machine arbors. The specification that the blade length corresponds to the hole spacing simplifies procurement and machine compatibility checks. For maintenance planning and machine setup, these measurable values enable accurate inventory matching and predictable machine behaviour during cutting operations. Versatility, longevity and practical workshop benefits The blade’s construction and tooth geometry make it a practical choice for varied tasks where one reliable cutting tool is needed rather than multiple specialised blades. The vacuum-hardening treatment improves wear resistance and service life, reducing replacement frequency and contributing to a lower total cost of ownership over time. For teams new to blade selection, the straightforward specification and robust build reduce uncertainty during selection and support consistent quality in finished parts. For further application guidance, technical questions or compatibility checks, Metav Werkzeuge provides advisory support by email or phone to ensure correct blade choice for the intended machine and material. For tailored advice and availability, contact Metav Werkzeuge in Emmerich — Metav’s consultants will confirm suitability and delivery options for this TECWERK machine saw blade (SKU 2000814122NW) Technical data Article number: 2000814122NW Product type: Machine saw blade Brand: TECWERK Packaging unit: 1 UID: 2000814122NW Key dimensions Length: 300 mm Width: 25 mm Thickness: 1.6 mm Mounting bore: 8.5 mm Teeth: 14 TPI Features and applications Material: HSS-bimetal Vacuum-hardened Teeth set (geschränkt) Length corresponds to hole spacing Suitable for sawing a wide range of materials FAQ What materials can this blade cut effectively? The machine saw blade L300 x W25 x T1.6 mm (TECWERK) is specified as a vacuum-hardened HSS bimetal blade intended for cutting a wide variety of materials; tooth setting and 14 TPI favour general-purpose workshop use. Is the 8.5 mm bore compatible with standard machines? Yes, the 8.5 mm mounting hole fits common arbors; confirm machine spindle compatibility with the TECWERK machine saw blade’s listed mounting diameter before use. How does the 14 TPI affect cutting quality? A 14 TPI configuration provides a compromise between feed rate and finish quality, making the blade suitable for mixed-material tasks where both productivity and acceptable surface finish are required. What maintenance extends blade life? Regular inspection for wear, correct machine alignment and appropriate feed speed will prolong service life; the vacuum-hardened HSS bimetal construction of this TECWERK blade increases wear resistance compared with untreated alternatives. Can this blade be used for fine finishing cuts? While primarily designed for robust, general cutting, the 14 TPI and set teeth can achieve reasonable finishes; for very fine finishing, a blade with a finer tooth pitch would be preferable. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum‑hardened HSS bi‑metal construction and a versatile 14 TPI set‑tooth geometry for durable, reliable cutting across a wide range of materials; the 350 mm overall length with an 8.5 mm bore ensures secure mounting and straightforward machine compatibility. Order the blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK machine saw blade L350 × B32 × S1.6 mm, HSS bi‑metal, 14 TPI TECWERK machine saw blade engineered for workshop and small‑scale production band saws, suitable for cutting metals and mixed materials with consistent performance HSS bi‑metal construction, vacuum‑hardened 350 mm overall length, 8.5 mm bore 14 TPI with set teeth for versatile cutting 32 mm width and 1.6 mm thickness Long life and consistent edge retention with HSS bi‑metal The HSS bi‑metal composition combines a high‑speed steel cutting edge with a flexible backing steel, delivering a balance of durability and resistance to fracture. The blade is vacuum‑hardened, which increases wear resistance and reduces microstructural flaws compared with conventional hardening. For production environments this means fewer blade changes and more predictable tool life, supporting efficient planning and reduced downtime while maintaining cutting quality. Versatile tooth geometry for clean, controlled cuts Equipped with 14 TPI and set teeth, the blade creates a suitably wide kerf for chip evacuation while avoiding excessive material loss. The term "set teeth" refers to alternating tooth offsets that prevent the blade from pinching and help control cutting forces; this tooth form is especially useful when processing a variety of materials. The combination of tooth count and set gives a compromise between cutting speed and surface finish, enabling consistent results across different workpieces. Simple machine fit and mechanical stability The blade’s key dimensions support straightforward installation: overall length 350 mm (length corresponds to hole spacing for compatible machines), 8.5 mm bore for secure mounting, 32 mm width for lateral stability and 1.6 mm thickness for torsional rigidity. These measures contribute to reduced vibration and improved tracking in the saw frame, which translates to more accurate cuts and longer service life for both blade and machine components. Workflow advantages and maintenance clarity Using a vacuum‑hardened band saw blade lowers the frequency of replacements and helps maintain throughput in busy workshops. The robust build reduces the risk of unexpected failures, enabling clearer maintenance schedules and fewer interruptions to production. For buyers seeking dependable cutting performance in metalworking and mixed‑material tasks, the blade provides a cost‑effective balance of longevity and cutting efficiency, backed by technical data that simplifies integration into existing equipment. For delivery options, compatibility checks and technical advice on TECWERK machine saw blades, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise guidance and fast supply Technical data Article number: 2000814119NW Product: Machine saw blade Brand: TECWERK Material: HSS bi‑metal Packaging unit: 1 Facts Overall length: 350 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth per inch: 14 Special features Vacuum‑hardened construction Set teeth (geschränkt) Length equals hole spacing Suitable for cutting a wide range of materials FAQ What materials can this saw blade cut effectively? The TECWERK machine saw blade with HSS bi‑metal construction and 14 TPI is designed for reliable cutting of a broad spectrum of metals and mixed materials; the vacuum‑hardening improves wear resistance for extended service life. How does the 14 TPI tooth count affect cutting performance? A 14 TPI configuration on this band saw blade provides a balance between cutting speed and finish, making it suitable for general‑purpose metalworking where a compromise between throughput and surface quality is required. What does 'set teeth' mean for operation? Set teeth on the blade create a wider kerf that reduces binding and improves chip clearance; this enhances tracking stability and reduces cutting forces during machining. Is the blade compatible with standard band saw mounts? Yes — the 350 mm overall length (length = hole spacing) and an 8.5 mm bore ensure secure mounting in machines designed for that spacing; check machine specifications against the blade dimensions before fitting. How does vacuum hardening benefit maintenance intervals? Vacuum hardening increases surface hardness and reduces sub‑surface flaws, which extends useful cutting life and helps establish predictable maintenance cycles for the saw blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Built for demanding workshop work, this HSS bi-metal machine saw blade pairs vacuum hardening with a set-tooth geometry to cut a wide range of materials reliably; order the blade directly via Metav Werkzeuge or contact the consultants for tailored application advice. Machine saw blade L350×B32×S1.6 mm HSS, bore 8.5 mm, 8 TPI – TECWERK The machine saw blade L350×B32×S1.6 mm HSS, bore 8.5 mm, 8 TPI – a vacuum-hardened bi-metal blade designed for versatile industrial cutting in workshop and production environments. Vacuum-hardened HSS bimetal construction Compatible with a wide range of materials Set teeth for clean, consistent cutting 8.5 mm bore for standard arbour fitting High-efficiency cutting for varied materials This HSS bimetal saw blade delivers consistent cutting performance across a broad spectrum of workpieces thanks to its vacuum-hardening process, which increases edge stability and wear resistance. The combination of a 1.6 mm blade thickness and set teeth reduces friction and helps evacuate swarf, resulting in smoother feeds and less heat build-up during continuous runs. The blade’s construction is particularly suitable where tool life and repeatable cut quality are decisive for process efficiency. Durable construction for reliable production Designed with industrial use in mind, the blade’s bi-metal composition pairs a hardened cutting edge with a more flexible backing, offering resilience against shock and bending. The set tooth geometry helps maintain cutting clearance and reduces the likelihood of binding in mixed-material stacks. Where uptime matters, the blade’s heat-treated profile supports longer intervals between blade changes, contributing to a more economical workflow and predictable maintenance scheduling in production shops. Practical fit and straightforward integration With a bore diameter of 8.5 mm and an overall length that corresponds to the hole spacing, the saw blade integrates easily into standard machine arbour setups. The 8 TPI pitch is engineered for general-purpose cutting, balancing feed rate and finish. Nominal dimensions—350 mm length, 32 mm width and 1.6 mm thickness—provide a compact, stable cutting tool that suits many circular saw machines and cut-off systems commonly used in metalworking and workshop environments. For specification advice, application recommendations or to secure supplies of the TECWERK machine saw blade, contact Metav Werkzeuge for expert assistance at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 2000814118NW Label: Maschinensägeblatt L350xB32xS1,6mm HSS Loch-D.8,5mm ZpZ 8 TECWERK Manufacturer: TECWERK Facts Width: 32 mm Thickness: 1.6 mm Overall length: 350 mm Bore diameter: 8.5 mm Teeth per inch: 8 Packaging unit: 1 Special features HSS bimetal material Vacuum-hardened blade Set (geschränkt) teeth Length equals hole distance Suitable for cutting a wide range of materials FAQ What materials can be cut with this blade? The TECWERK machine saw blade is designed for cutting a wide range of materials; its HSS bimetal construction supports application across many common metals and mixed-material stacks. Is the bore diameter compatible with standard machines? Yes, the blade’s 8.5 mm bore fits many standard arbour systems; confirm machine arbour specifications before installation. How does the vacuum-hardening affect blade life? Vacuum-hardening increases edge stability and wear resistance, so the TECWERK blade typically maintains cutting performance longer under comparable operating conditions. What finish can be expected with 8 TPI? An 8 TPI pitch provides a compromise between cut speed and surface finish, suitable for general-purpose metal cutting with consistent chip evacuation. How is the blade mounted and aligned? Mounting follows standard arbour procedures for the matching 8.5 mm bore; ensure correct flange alignment and secure fixation to avoid imbalance. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining a vacuum-hardened HSS bimetal construction with a 10 TPI cross-set tooth form delivers dependable performance across a wide range of materials while keeping blade life and downtime to a minimum. Order the machine saw blade directly via Metav Werkzeuge or ask our consultants for material-specific advice. TECWERK Machine Saw Blade L350×32×1.6 mm — HSS bimetal, 8.5 mm hole A TECWERK Machine Saw Blade L350×32×1.6 mm engineered for robust industrial and workshop sawing, offering vacuum hardening and a central 8.5 mm mounting hole for secure fitting. Vacuum-hardened HSS bimetal construction 350 mm length with 8.5 mm centre hole 32 mm blade width, 1.6 mm thickness 10 TPI cross-set teeth for versatile cutting Reliable hardening and material endurance for continuous operation The blade is made from HSS bimetal, a construction that joins high-speed steel cutting edges to a flexible backing, delivering a balance of wear resistance and resilience. The vacuum-hardened treatment increases edge life and reduces tooth failure under heavy use, which translates into fewer blade changes and more consistent throughput on the shop floor. This technical approach targets lower life-cycle costs and dependable performance in repetitive sawing tasks. Designed dimensions that match common machine fittings and alignment requirements With a length of 350 mm and a central 8.5 mm bore, the blade matches common mounting arrangements where the length corresponds to hole spacing. The 32 mm width and 1.6 mm thickness provide the stiffness required for straight cuts while allowing efficient chip evacuation. These measured proportions aid compatibility with a broad range of circular saw arbors and fixtures, simplifying inventory decisions and machine setup. Geometry tuned for stable cutting and reduced vibration The combination of width and thickness helps maintain blade stability at operating speeds, reducing chatter and improving cut precision. The cross-set (geschränkt) tooth configuration alternates tooth set to create a kerf wider than the blade body, preventing binding and allowing faster feed rates. The result is a cleaner cut profile and improved component quality, especially when repeatability across multiple workpieces matters. Versatile tooth pitch for efficient work on varied materials Equipped with 10 TPI, the tooth pitch is optimised to offer a compromise between cutting speed and surface finish for a wide range of materials. The set teeth and HSS cutting edge allow sawing of many workpiece types with consistent results, making the blade suitable for mixed production environments where one tool must handle differing tasks. This versatility reduces tool change complexity and supports flexible manufacturing processes. For precision sawing with TECWERK quality, contact Metav Werkzeuge for technical advice and prompt supply from Emmerich. Technical data Article number: 2000814126NW Product type: Machine saw blade Manufacturer: TECWERK Material: HSS‑bimetal Length: 350 mm Blade width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Tooth form: cross-set Teeth: 10 TPI Packaging unit: 1 Facts Length: 350 mm Width: 32 mm Thickness: 1.6 mm Bore: 8.5 mm Teeth: 10 TPI Special features Vacuum-hardened HSS bimetal construction Set (geschränkt) tooth configuration Length corresponds to hole spacing Suitable for sawing a wide range of materials Packing unit: 1 FAQ What materials can this saw blade cut effectively? The TECWERK machine saw blade (machine saw blade, SKU 2000814126NW) is designed to cut a wide range of materials thanks to its HSS bimetal teeth and cross-set geometry, offering a balance of cutting speed and finish. Is the blade compatible with standard circular saw arbors? Yes; the blade features an 8.5 mm central bore and a 350 mm overall length, making it compatible with many common mounting arrangements where the length equals the hole spacing. How does the vacuum hardening benefit workshop use? Vacuum hardening improves edge durability and reduces tooth wear, which means longer service intervals and lower downtime for blade changes during regular production runs. What cutting characteristics does 10 TPI provide? A 10 TPI pitch provides a compromise between feed rate and surface finish, delivering efficient material removal while maintaining acceptable cut quality for varied workshop applications. Can this blade be used for continuous production runs? The combination of HSS bimetal, vacuum hardening and set tooth design gives the blade the robustness needed for prolonged use in production environments, reducing replacements and maintaining consistent cut quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from a vacuum‑hardened HSS bi‑metal construction, precisely set teeth and a standard 8.5 mm bore for secure mounting; the result is durable, consistent cutting across many materials. Order the blade directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK machine saw blade L350 x W32 x T1.6 mm — HSS bi‑metal, 6 TPI The TECWERK machine saw blade L350 x W32 x T1.6 mm is a vacuum‑hardened HSS bi‑metal blade designed for industrial and workshop machines to cut a broad range of materials reliably Vacuum‑hardened HSS bi‑metal construction Set teeth for efficient chip removal 6 TPI for mixed‑material applications Bore Ø 8.5 mm for standard arbour mounting Long service life through robust HSS bi‑metal construction The blade’s HSS bi‑metal composition and vacuum‑hardened edge treatment deliver a balance of toughness and wear resistance, which extends blade life under continuous use. This manufacturing approach bonds a high‑speed steel cutting edge to a flexible backing strip, reducing the risk of premature fracture while preserving sharpness. For production environments seeking fewer tool changes and predictable downtime, this blade offers measurable reliability and service continuity. Consistent cutting performance with set teeth and 6 TPI With set teeth and a 6 TPI configuration, the geometry is optimised for fast cutting across varied materials while aiding chip evacuation to prevent clogging. The relatively coarse tooth spacing supports efficient material removal on non‑ferrous metals, plastics and mixed batches, while the set reduces binding and heat build‑up. In practice, this means fewer reworks and a steadier feed rate on demanding jobs, translating directly into improved throughput. Practical installation and mounting for workshop workflows Designed with a bore Ø 8.5 mm and a length that corresponds to the hole centre distance, the blade fits common machine arbors with secure seating for repeatable results. Supplied individually, the blade simplifies inventory control for small and medium workshops and integrates smoothly into existing tool sets. The combination of standard dimensions and robust construction reduces set‑up time and supports a streamlined machining process. Versatile use across many materials with industrial focus Manufactured for general workshop and industrial cutting tasks, the blade is suitable for a wide range of materials, providing a dependable option where a universal, heavy‑duty solution is required. The HSS bi‑metal edge copes well with abrasive conditions and tempers the trade‑off between fatigue resistance and edge retention. When consistent cross‑material performance and reduced tool handling are priorities, this blade is a pragmatic choice that supports steady production. For application support or to secure this TECWERK HSS bi‑metal machine saw blade, contact Metav Werkzeuge in Emmerich—specialists are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice and logistics coordination Technical data Article number: 2000814124NW Product type: Machine saw blade Manufacturer: TECWERK Product label: Machine saw blade L350 x W32 x T1.6 mm, HSS, bore Ø 8.5 mm, 6 TPI, TECWERK Facts Length: 350 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth: 6 per inch (6 TPI) Packaging unit: 1 Special features Material: HSS bi‑metal Vacuum‑hardened Set teeth (geschränkt) Length equals hole centre distance Cuts a wide range of materials FAQ How does the HSS bi‑metal construction extend blade life? The HSS bi‑metal design in the TECWERK machine saw blade pairs a hard cutting edge with a resilient backing, reducing fracture risk and maintaining sharpness for longer runs. Which materials can be sawn with this blade? This TECWERK blade is specified for cutting a wide range of materials, making it suitable for mixed batches of non‑ferrous metals, plastics and general workshop stock. What does 6 TPI mean for cutting behaviour? Six teeth per inch indicate a coarser tooth pitch that removes material quickly and handles mixed materials well, improving chip flow and reducing clogging compared with finer pitches. Is the blade compatible with standard arbors? Yes. The bore Ø 8.5 mm allows mounting on common machine arbors designed for an 8.5 mm hole, ensuring secure fitting and repeatable alignment. How is the blade supplied and what should be considered during installation? The blade is supplied individually; ensure the machine’s hole centre distance matches the blade length and verify secure clamping to prevent run‑out and vibration during cutting. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS bimetal construction and vacuum-hardened treatment for extended service life, paired with a coarse 6 tpi geometry that accelerates material removal; order the blade directly via Metav Werkzeuge or contact their consultants for technical advice. Machine saw blade 350 × 32 × 2 mm, HSS, Ø8.5 mm, 6 tpi – TECWERK The machine saw blade 350 × 32 × 2 mm, made from HSS bimetal, designed for versatile cutting tasks in general workshop and industrial settings Vacuum-hardened HSS bimetal construction Universal material compatibility for workshop use Set teeth, 6 tpi for aggressive material removal Ø8.5 mm mounting hole for standard machines Robust construction for longer intervals between tool changes The blade combines HSS and bimetal design to balance toughness and edge retention. The bonding of high-speed steel cutting edges to a flexible spring steel back creates a tool that resists chipping while maintaining a cutting edge capable of repeated resharpening, resulting in measurable reductions in downtime. This construction, together with vacuum-hardened processing, improves wear resistance and supports continuous operation in high-throughput environments where consistent performance is essential. Coarse tooth geometry for efficient removal on mixed materials Equipped with 6 tpi and set teeth, the saw blade is optimised for rapid chip evacuation and pronounced cutting progress on thicker or more fibrous stocks. The coarser pitch means fewer teeth engage per revolution, reducing heat build-up and allowing higher feed rates where a clean surface finish is not the principal requirement. For production processes prioritising cycle time, this geometry offers a clear efficiency advantage without sacrificing basic cut quality. Dimensional reliability and machine compatibility Critical dimensions are exact: 350 mm overall length, 32 mm width and 2 mm thickness, with a central mounting bore of Ø8.5 mm. These measurements ensure secure seating in standard machine arbors and predictable run-out characteristics. The blade’s dimensional stability, backed by the chosen materials and finish, supports reproducible cutting geometry which is important for jigs, fixtures and downstream processes that rely on consistent part sizes. Practical workshop benefits and application range The tool is supplied as a single unit and is suitable for a wide range of workshop tasks, from profile cutting to general-purpose separation operations. Its HSS bimetal composition and heat treatment allow cutting of diverse materials encountered in mixed production runs, reducing the need to swap specialised blades for each job. The result is a streamlined tooling inventory and improved workflow continuity in small to medium-sized production settings. Safety and handling considerations for dependable results The combination of a spring-steel body and hardened cutting edges provides inherent resilience against impact and bending; nevertheless, correct installation and machine guarding remain essential. When mounted correctly, the blade produces predictable chip behaviour and reduces vibration, contributing to safer operation and fewer rejects across repeated runs. Periodic inspection for edge wear and tension distortion will preserve precision and extend service intervals. For procurement or detailed technical clarification on the TECWERK machine saw blade, contact Metav Werkzeuge in Emmerich for reliable supply and guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814483NW Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Facts Length: 350 mm Width: 32 mm Thickness: 2 mm Mounting hole: Ø8.5 mm Teeth: 6 tpi Special features Material: HSS bimetal Vacuum-hardened cutting edge Set teeth for improved chip clearance Suitable for a wide range of materials FAQ What materials can this saw blade cut? The TECWERK machine saw blade is designed for broad compatibility and, thanks to its HSS bimetal construction and vacuum-hardening, can be used on many common workshop materials where a coarse tooth geometry is appropriate. What is the exact mounting hole size and does it fit standard machines? The blade features a central mounting bore of Ø8.5 mm, compatible with many standard machine arbors used in industrial and workshop sawing equipment. What does the HSS bimetal construction mean for tool life? The HSS bimetal design pairs hardened cutting edges with a resilient steel back, improving wear resistance and reducing the frequency of replacements compared with monolithic alternatives. How does the 6 tpi configuration affect cutting performance? A 6 tpi pitch with set teeth promotes fast material removal and efficient chip clearance, making the blade suitable for rough and medium-quality cuts where throughput is prioritised. Is the blade supplied ready for machine mounting? The saw blade is supplied as a single unit with the specified bore and dimensions; proper mounting and alignment on the appropriate machine arbor are required for safe and accurate operation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS bimetal construction and vacuum-hardened treatment for extended blade life and reliable coarse cutting; order via Metav Werkzeuge or consult our specialists for a tailored supply solution. TECWERK Machine Saw Blade L350 × B25 × S1.25 mm – HSS Bimetal, 10 TPI A TECWERK machine saw blade designed for workshop and industrial use, offering vacuum-hardened HSS bimetal construction and set teeth for fast material removal across many substrates HSS bimetal construction for long life Vacuum-hardened for increased wear resistance Set teeth, 10 TPI for fast, coarse cutting 350 × 25 × 1.25 mm with 8.5 mm bore Consistent, coarse cutting performance for production use The HSS bimetal composition ensures a hard cutting edge bonded to a resilient backing for sustained performance in repetitive cutting tasks. With 10 TPI and set teeth, the blade delivers aggressive chip clearance, which reduces cutting forces and keeps cycle times short—advantageous for production environments where efficiency is paramount. The vacuum-hardening process further enhances edge stability, contributing directly to predictable tool life and fewer blade changes. Robust construction that suits a wide range of materials Thanks to the vacuum-hardened treatment and the bimetal design, the saw blade copes with a broad spectrum of workpiece materials, from non-ferrous metals to mixed shop stock. The set tooth configuration minimises jamming when working with thicker sections, and the blade geometry supports coarse cuts that prioritise material removal over fine finishes—ideal for preparatory sawing or rapid cross-cutting in a busy workshop. This results in reliable throughput without frequent interruptions for blade maintenance. Practical dimensions and straightforward integration into existing machines Measured at 350 mm overall length with a 25 mm width and 1.25 mm plate thickness, the blade fits standard machine saw arbors and applications that use an 8.5 mm centre bore; the stated length corresponds to the hole spacing intended for precise mounting. The compact thickness balances stiffness and kerf size, allowing effective cutting with acceptable material loss. As a purpose-made machine saw blade, it simplifies inventory management for shops seeking a robust, general-purpose cutting tool. For stock availability or a recommendation tailored to specific production needs, contact Metav Werkzeuge by email or telephone to discuss order quantities and delivery from our Emmerich warehouse. Technical data Article number: 2000814482NW Label: Maschinensägeblatt L350xB25xS1,25mm HSS Loch-D.8,5mm ZpZ 10 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Facts Overall length: 350 mm Width: 25 mm Thickness: 1.25 mm Bore diameter: 8.5 mm Teeth per inch: 10 Special features HSS bimetal material Vacuum-hardened Set teeth (geschränkt) Length corresponds to hole spacing Packing unit: 1 FAQ What materials can this blade cut? The TECWERK machine saw blade (SKU 2000814482NW) is made from HSS bimetal and, thanks to its vacuum-hardening and set teeth, is suitable for cutting a wide range of common workshop materials; selection should be matched to the specific material and cut type. Is the blade compatible with standard saw arbors? Yes. The blade has an 8.5 mm bore and a total length of 350 mm, designed for machines that accept this centre-hole size and blade length. How aggressive is the tooth pitch for finishing work? With 10 TPI and a set tooth form, the blade is geared towards coarse, fast material removal rather than fine finishing; it is ideal where throughput is prioritised over surface smoothness. How does vacuum-hardening benefit tool life? Vacuum-hardening increases edge stability and wear resistance, which prolongs service intervals and reduces the frequency of blade replacements under comparable operating conditions. Can this blade be used for mixed-material bundles or non-ferrous metals? The combination of HSS bimetal and set teeth allows effective cutting through mixed stock and non-ferrous metals; however, cutting performance will depend on feed rate and machine rigidity. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

A vacuum‑hardened HSS‑bimetal saw blade with set teeth and 6 TPI delivers robust, versatile cutting across many workshop applications; its 350×35×2 mm format and 8.5 mm bore ensure reliable machine fitment. Order directly via Metav Werkzeuge or consult their specialists for material‑specific guidance. Machine saw blade L350×W35×T2 mm HSS, Ø8.5 mm bore, 6 TPI — TECWERK The Machine saw blade L350×W35×T2 mm HSS, Ø8.5 mm bore, 6 TPI is a vacuum‑hardened HSS‑bimetal machine blade engineered for efficient, long‑lasting cutting across a wide range of materials in industrial and workshop environments. HSS‑bimetal construction for extended tool life Vacuum‑hardened for improved wear resistance 6 TPI with set teeth for versatile cutting 350×35×2 mm format with Ø8.5 mm bore Consistent, high‑efficiency cutting thanks to material and tooth design The TECWERK machine blade combines HSS‑bimetal construction with vacuum‑hardening to deliver a durable cutting edge that resists premature wear under continuous operation. The set teeth geometry and 6 TPI tooth spacing are chosen to balance material removal and surface finish, which makes the blade suitable for aggressive cuts as well as cleaner finishes on mixed materials. Explaining the technical terms: HSS‑bimetal means a high‑speed steel cutting edge bonded to a tougher backing steel, which keeps the edge sharp while the substrate absorbs cutting stresses. This engineering choice reduces downtime and replacement frequency, improving overall workshop productivity. Engineered dimensions for secure machine integration and repeatable results With precise dimensions of 350×35×2 mm and an Ø8.5 mm mounting bore, the blade is configured for standard machine spindles and fixtures where length corresponds to hole‑centre spacing. Accurate sizing reduces run‑out and vibration, translating into straighter cuts and longer tool life. The compact thickness and stable backing material maintain blade straightness under load, while the 8.5 mm bore ensures consistent concentricity on compatible machines. Clear dimensional specification simplifies inventory management and helps engineers select the correct blade for automatic feed or hand‑fed sawing stations. Practical benefits that improve workflow and safety Selecting a vacuum‑hardened HSS‑bimetal blade reduces the need for frequent blade changes and supports uninterrupted production runs, a key advantage in busy workshops and small‑scale manufacturing. The set teeth minimise material clogging and chip build‑up, contributing to controlled cutting forces and lower risk of kickback or irregular feed. The blade’s versatility for a wide range of materials keeps tooling inventories leaner, which streamlines order processes and storage. Paired with basic machine guards and correct feed settings, the blade helps maintain a safer working environment while delivering predictable, repeatable results. Choose the TECWERK HSS‑bimetal blade for dependable workshop performance and contact Metav Werkzeuge in Emmerich for application advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814486NW Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Specifications Length: 350 mm Width: 35 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth: 6 TPI Features Material: HSS‑bimetal Tooth form: set teeth Vacuum‑hardened Length corresponds to hole‑centre spacing Suitable for cutting a wide range of materials FAQ Is this blade suitable for mixed material cutting? The TECWERK machine saw blade is vacuum‑hardened and made from HSS‑bimetal, giving it the resilience required for cutting a wide range of materials while maintaining edge life. What machines will accept the 8.5 mm bore? Machines with a matching 8.5 mm mounting arbor or adaptor can accept the blade; the 350×35×2 mm format is designed for common industrial saw fittings and repeatable mounting. How does 6 TPI affect cutting performance? A 6 TPI configuration with set teeth balances cutting speed and surface finish, making the blade effective for general‑purpose sawing where both material removal and acceptable finish are required. Can this blade handle heavy continuous use? Thanks to HSS‑bimetal construction and vacuum‑hardening, the blade is engineered for extended operation, reducing downtime for blade changes in many workshop scenarios. What is the main advantage of the set teeth? Set teeth provide clearance for chips and reduce binding, leading to smoother feeds and lower cutting forces compared with non‑set geometries. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust HSS bimetal design and vacuum-hardening for longer cutting life, combined with a compact form factor that fits standard machine spindles; order the blade directly via Metav Werkzeuge or consult the specialists for application-specific advice. Machine saw blade L350 x B32 x S2 mm, HSS bimetal, hole Ø8.5 mm — TECWERK The Machine saw blade L350 x B32 x S2 mm, HSS bimetal, hole Ø8.5 mm, 10 TPI (TECWERK) is a vacuum-hardened machine blade for efficient sawing across a broad range of workshop and industrial materials. HSS bimetal for extended durability Vacuum-hardened body for wear resistance Set teeth, 10 TPI for versatile cutting 350 mm length with Ø8.5 mm bore Consistent performance across many materials The HSS bimetal construction combines a high-speed steel cutting edge bonded to a flexible backing, delivering a balance of toughness and resistance to fracture. Vacuum hardening further stabilises the steel microstructure, which results in improved wear resistance and a longer service life under repetitive machine sawing. With set teeth and a 10 TPI spacing, the blade manages chip clearance reliably, reducing the risk of clogging when processing mixed batches of materials. This characteristic makes the blade suitable for production environments where different substrates are encountered in sequence. Exact fit and reliable machine integration With an overall length of 350 mm, a width of 32 mm and a plate thickness of 2 mm, the blade is engineered for stable tracking in standard machine arbors. The Ø8.5 mm bore ensures compatibility with machines that accept this centre hole size, while the specification "length = hole spacing" confirms the blade’s mounting geometry aligns with common machine standards. The 10 TPI tooth count provides a compromise between cut speed and surface finish, offering controlled feeds in both thin metals and non-ferrous workpieces. These measurable dimensions support quick decision-making when checking machine compatibility and serve as a clear basis for procurement. Less downtime, lower operating costs The vacuum-hardening process and bimetal construction translate directly into reduced tool change frequency and lower lifecycle cost per cut. A longer-lasting blade reduces the total number of replacements required over a production run, improving uptime and process stability. In practice, this means more parts produced between maintenance intervals and a leaner workflow: faster set-up, predictable run times and fewer interruptions. For workshops targeting efficiency gains, the blade’s endurance supports higher overall equipment effectiveness without compromising cut quality. Practical handling and safe operation The combination of set teeth and robust plate thickness minimises vibration and lateral deflection, which contributes to consistent kerf width and safer operation. The blade is supplied as a single unit per packaging, ready for installation; correct mounting and tensioning remain essential to achieve the expected service life and to prevent premature wear. For application clarification or material-specific recommendations, Metav Werkzeuge’s technical advisors provide objective guidance on selection and machine matching, helping integrate the blade into existing workflows with minimal disruption. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice on machine compatibility, availability and to secure stock for production. Technical data Article number: 2000814484NW Label: Maschinensägeblatt L350xB32xS2mm HSS Loch-D.8,5mm ZpZ 10 TECWERK Type: Machine saw blade Manufacturer: TECWERK Facts Overall length: 350 mm Width: 32 mm Thickness: 2 mm Bore diameter: 8.5 mm Tooth pitch: 10 TPI Packaging unit: 1 Special features Material: HSS bimetal Vacuum-hardened for wear resistance Teeth: set (geschränkt) Length equals hole spacing for mounting alignment FAQ What materials can this saw blade cut? The blade's HSS bimetal design and vacuum-hardening make it suitable for cutting a wide range of materials, including various steels and non-ferrous metals, with reliable performance for mixed-material tasks. Is the bore size compatible with standard machine arbors? Yes, the Ø8.5 mm bore is specified for compatibility with machines accepting this centre hole diameter; check machine spindle specifications to confirm fit. What does 10 TPI mean for cutting results? A tooth pitch of 10 TPI (teeth per inch) balances cutting speed and finish quality, providing controlled chip removal and suitable surface results across many workshop materials. How should the blade be mounted and tensioned? The blade must be mounted so that the bore aligns with the machine arbor and the plate runs true; correct tensioning and checking for runout are recommended to ensure safe operation and optimum blade life. Does the blade come with any coating? This saw blade is supplied without an additional coating; its longevity is achieved through HSS bimetal construction and vacuum-hardening. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS bimetal construction, vacuum hardening and a universal tooth pitch to keep production steady and reduce tool changes; order the blade directly via Metav Werkzeuge or consult the specialists for installation advice. Machine saw blade L350 × 35 × 2 mm, HSS bimetal, Ø 8.5 mm bore, 8 TPI — TECWERK The machine saw blade L350 × 35 × 2 mm, HSS bimetal, Ø 8.5 mm bore, 8 TPI (TECWERK) is a vacuum‑hardened blade designed for robust sawing tasks across workshops and light industrial environments. HSS bimetal, vacuum-hardened blade Suitable for cutting a wide range of materials Set teeth, 8 TPI for versatile cutting 350 mm length with Ø 8.5 mm bore Durable cutting life reduces downtime and maintenance Constructed from HSS bimetal and vacuum-hardened, the blade delivers an extended service life compared with standard high-speed steels. The metallurgical bond between the cutting edge and the backing strip increases wear resistance and fracture toughness, which means fewer interruptions for blade changes and less unplanned maintenance. For production environments where a steady output matters, this translates into predictable tooling cycles and lower overall machine downtime. Accurate fit and straightforward installation for reliable operation With a 350 mm overall length, 35 mm width and 2 mm thickness, plus a Ø 8.5 mm bore, the blade is engineered for a precise fit on common machine spindles. The specification "length = hole spacing" simplifies replacement planning and helps ensure repeatable alignment when mounting new blades. The set teeth arrangement and 8 TPI tooth pitch balance chip removal and cut quality, offering a compromise between material removal rate and surface finish that suits a broad range of cutting tasks. Versatility that keeps production moving The blade’s design supports cutting of many materials, making it a versatile choice for mixed‑material workshops and servicing tasks where multiple substrates are encountered. The combination of tooth geometry and HSS cutting edges allows efficient chip evacuation and stable cut progression, reducing the need for frequent tool swaps. In practice, this means faster throughput on varied jobs and a simpler inventory of blades to cover multiple applications, supporting both throughput and logistical ease. Speak to Metav Werkzeuge for tailored advice on machine compatibility and efficient blade selection; Metav Werkzeuge can advise on suitable mounting and supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000814487NW Product type: Machine saw blade Manufacturer: TECWERK SKU/UID: 2000814487NW Core data Overall length: 350 mm Width: 35 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth: set Teeth per inch: 8 Packaging unit: 1 Special features Material: HSS bimetal Vacuum‑hardened cutting edge Suitable for cutting a wide range of materials Length corresponds to hole spacing FAQ What materials can this saw blade cut? The TECWERK machine saw blade L350 × 35 × 2 mm with HSS bimetal edge is specified for sawing a wide range of materials, providing versatility for mixed‑material workshop tasks. Is the blade suitable for continuous production use? Yes, the vacuum‑hardened HSS bimetal construction of the blade is designed to extend cutting life, making it appropriate for repetitive or continuous sawing operations. How does the 8 TPI tooth pitch affect cutting? An 8 TPI tooth pitch offers a balance between cutting speed and finish quality, allowing efficient material removal while maintaining acceptable surface results for general applications. Can the blade be mounted on standard machines? The blade’s Ø 8.5 mm bore and the note that length equals hole spacing simplify mounting on compatible machines; confirm spindle and hole‑spacing compatibility before installation. What are the dimensions and thickness of the blade? The blade measures 350 mm in length, 35 mm in width and 2 mm in thickness, which supports stable operation and accurate alignment. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Maschinensägeblatt L350xB32xS2mm HSS Loch-D.8,5mm ZpZ 4 TECWERK – Maschinensägeblatt Das Maschinensägeblatt L350xB32xS2mm HSS Loch-D.8,5mm ZpZ 4 TECWERK ist ein vakuumgehärtetes Bimetallblatt für den universellen Einsatz in der Metallbearbeitung und im Werkstattbetrieb Vakuumgehärtetes HSS-Bimetall für lange Standzeiten Geschränkte Zähne für saubere Schnitte und Spanabfuhr Bohrung Ø 8,5 mm für Standardmaschineinspannung Länge 350 mm entspricht Lochabstand für einfache Montage 4 Zähne pro Zoll für feine Schnittqualität Präzision und Verschleißfestigkeit durch Materialwahl Das Blatt besteht aus HSS-Bimetall und wurde vakuumgehärtet, was eine Kombination aus hoher Zähigkeit und dauerhafter Schneidkante liefert. Dadurch reduziert sich die Häufigkeit des Blattwechsels, was die Maschinenlaufzeit erhöht und Ausfallzeiten in der Produktion senkt. Die Bimetallbauweise sorgt dafür, dass die Schneidkante hohe Beanspruchung verkraftet, während der Rücken Flexibilität und Bruchsicherheit bietet. Schnittbild und Bearbeitungsvorteil Dank der geschränkten Zähne und der Zahnung von 4 ZpZ entstehen gleichmäßige Spanformen und reduzierte Wärmentwicklung. Das Ergebnis ist ein sauberer Schnitt bei Stahl, NE-Metallen und vielen anderen Werkstoffen, was Nachbearbeitungsschritte minimiert. Dies verbessert die Prozesssicherheit und spart Zeit in Serienfertigung sowie in Reparaturwerkstätten. Einfache Montage und Maschinenkompatibilität Mit einer Gesamtlänge von 350 mm und einer Bohrung von 8,5 mm passt das Blatt in gängige Maschinensägeaufnahmen; die Länge entspricht dem üblichen Lochabstand, was die Umrüstung erleichtert. Die Dicke 2 mm und die Breite 32 mm bieten Stabilität bei moderaten Schnittkräften und eignen sich für den vielseitigen Werkstatteinsatz. Eine klare Montage reduziert Rüstzeiten und vereinfacht den Werkzeugwechsel. Zielgruppe, Anwendung und Wirtschaftlichkeit Dieses Maschinensägeblatt richtet sich an Werkstätten, Instandhaltung und Kleinserienfertiger, die robuste und langlebige Sägeblätter benötigen. Ein geringerer Ersatzbedarf senkt Materialkosten und vereinfacht die Lagerhaltung. Die Kombination aus Standzeit und Schnittqualität macht das Blatt besonders wirtschaftlich für regelmäßige Einsatzzyklen in der Metallbearbeitung. Empfehlung: Das Maschinensägeblatt von TECWERK über Metav Werkzeuge beziehen – für verlässliche Versorgung und fachkundige Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 2000814121NW Marke: TECWERK Produktart: Maschinensägeblatt Verpackungseinheit: 1 Fakten Gesamtlänge: 350 mm Breite: 32 mm Stärke: 2 mm Bohrungsdurchmesser: 8,5 mm Zähne pro Zoll: 4 Besonderheiten Material: HSS-Bimetall (Hochgeschwindigkeitsstahl, Bimetallbauweise) Zahnungsart: geschränkt Vakuumgehärtet Länge = Lochabstand FAQ Welche Materialien lassen sich mit dem TECWERK Maschinensägeblatt sägen? Das Maschinensägeblatt L350xB32xS2mm HSS Loch-D.8,5mm ZpZ 4 TECWERK ist für die Bearbeitung von Stahl und zahlreichen NE-Metallen geeignet; die HSS-Bimetallausführung bietet dabei hohe Widerstandsfähigkeit gegen Verschleiß. Welche Maschine passt zu diesem Sägeblatt? Blattdaten wie Bohrungsdurchmesser 8,5 mm und Gesamtlänge 350 mm machen das TECWERK Maschinensägeblatt kompatibel mit Standard-Maschinensägeaufnahmen, die diesen Lochabstand unterstützen. Wie beeinflusst die Zahnung 4 ZpZ das Schnittbild? Die Zahnung mit 4 ZpZ sorgt für feine Schnitte und eine gleichmäßige Spanabfuhr, wodurch saubere Kanten entstehen und Nachbearbeitung reduziert wird. Warum ist vakuumgehärtetes Material vorteilhaft? Vakuumgehärtung erhöht die Härte der Schneidkante bei gleichzeitiger Erhaltung der Zähigkeit; beim TECWERK Blatt führt das zu längerer Standzeit und weniger Ausfällen im Produktionsbetrieb. Ist dieses Blatt für Serienfertigung oder Einzelfertigung besser geeignet? Die Kombination aus HSS-Bimetall und vakuumgehärteter Schneide macht das Blatt sowohl für wiederkehrende Produktionsläufe als auch für intensive Einzelfertigung zuverlässig einsetzbar. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund

Take advantage of the blade’s combination of vacuum‑hardened HSS bimetal construction and a narrow 1.6 mm kerf for efficient, durable sawing across a wide range of workshop materials; order the TECWERK machine saw blade directly via Metav Werkzeuge or contact our consultants for specification advice. TECWERK machine saw blade L 400 x W 32 x T 1.6 mm — HSS bimetal, 24 TPI, 8.5 mm bore The TECWERK machine saw blade L 400 x W 32 x T 1.6 mm is a vacuum‑hardened HSS bimetal blade designed for versatile industrial sawing applications where reliability and long life are essential Vacuum‑hardened HSS bimetal construction 24 TPI with set (staggered) teeth 8.5 mm mounting hole for universal fit 400 mm length with 1.6 mm narrow kerf Robust cutting performance for diverse workshop tasks The vacuum‑hardened HSS bimetal construction delivers a robust cutting edge that balances wear resistance with a flexible backing, extending service life under industrial loads. The hardened edge provides consistent performance when sawing a broad spectrum of materials as indicated in the product specification, while the bimetal backing reduces the risk of premature blade fracture. These material choices result in reliable durability and predictable service intervals, which supports continuous production and lowers downtime. Precise, efficient cuts with a narrow kerf and 24 TPI With an overall length of 400 mm, a width of 32 mm and a blade thickness of 1.6 mm, the design yields a narrow kerf that reduces material loss and improves cutting speed on many tasks. The 24 TPI tooth spacing combined with set (staggered) teeth promotes effective chip clearance and reduces friction during cutting, offering a good compromise between cutting rate and finish. The 8.5 mm bore ensures straightforward mounting to compatible machines; note that length matches the hole pitch where required for correct installation. Practical advantages for shop owners and maintenance teams The blade’s specification supports straightforward replacement and stock management in busy workshops: compact dimensions and a single‑piece packaging unit simplify storage. The combination of hardened cutting edges and set teeth reduces the frequency of regrinding and replacement, helping to sustain throughput and lower lifetime operating effort. Technical compatibility and part traceability also aid procurement and machine maintenance planning in professional environments. Contact Metav Werkzeuge today to discuss how the TECWERK HSS bimetal machine saw blade (SKU 2000814136NW) fits your workshop requirements — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 2000814136NW Product type: Machine saw blade Manufacturer: TECWERK Material: HSS bimetal Packaging unit: 1 Core specifications Length: 400 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth: 24 TPI Special features Vacuum‑hardened cutting edge Set (staggered) teeth Length corresponds to hole pitch Suitable for sawing a wide range of materials FAQ What machine mounting is required for this blade? The blade uses an 8.5 mm mounting hole and is intended for machines compatible with a 400 mm blade length; the TECWERK machine saw blade (SKU 2000814136NW) fits machines designed for this bore and blade pitch. Which materials can be machined with this blade? The vacuum‑hardened HSS bimetal design allows the blade to cut a broad variety of workshop materials; selection of the exact cutting parameters should follow the material and machine specifications. How does the 24 TPI tooth count affect cutting? A 24 TPI arrangement offers a balance between cutting speed and finish; with set teeth it aids chip removal and helps prevent binding during through‑cutting operations. Is this blade suitable for high‑volume production? The hardened HSS edges and bimetal construction are specified for extended durability under industrial use, making the blade appropriate for repeated production tasks when used with suitable machines and feeds Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from a vacuum‑hardened HSS bimetal construction combined with a 400 mm blade length and a 1.6 mm thickness for reliable, long‑running cuts in workshop production; order the blade directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK machine saw blade L400 x W32 x T1.6 mm, HSS bimetal, 6 TPI The TECWERK machine saw blade L400 x W32 x T1.6 mm, an HSS‑bimetal machine blade with set teeth, is designed for industrial and workshop sawing tasks across a broad range of materials Vacuum‑hardened HSS bimetal construction 400 mm cutting length, 32 mm blade width 8.5 mm bore for standard arbors Built for consistent, heavy‑duty cutting The blade’s HSS bimetal composition and vacuum‑hardened treatment deliver enhanced durability and resistance to premature wear, which translates into longer intervals between blade changes and more predictable production cycles. With a 1.6 mm thickness and a set‑tooth geometry, the design balances rigidity and cutting clearance to maintain a stable kerf while minimising vibration. These technical choices support efficient material removal and reduce downtime in repetitive cutting tasks. Compatibility and efficient integration into production Engineered with a 32 mm width and an 8.5 mm bore, the blade fits common machine arbors and can be integrated into existing sawing stations without modification. The 6 TPI tooth spacing with set teeth provides a compromise between fast cutting and manageable finish quality, making the blade suitable for varied applications where throughput and reliability are priorities. Clear specification of blade dimensions helps planners and buyers match tooling to machines quickly and confidently. Practical advantages for workshop workflows The blade’s specification supports straightforward handling and predictable life cycles in a workshop environment. The combination of vacuum‑hardened teeth and bimetal construction offers improved edge retention for extended runs and consistent results from batch to batch. For procurement and stocking, the single‑unit packaging simplifies ordering and inventory control. Assistance on correct mounting and feed settings is available to ensure the TECWERK machine saw blade performs as intended in specific setups. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK machine saw blade into existing machinery and for supply from our Emmerich location: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 2000814128NW Description: Maschinensägeblatt L400xB32xS1,6mm HSS Loch-D.8,5mm ZpZ 6 TECWERK Facts Length: 400 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth per inch: 6 Packaging unit: 1 Special features Material: HSS bimetal Tooth form: set teeth (geschränkt) Treatment: vacuum‑hardened Suitable for general workshop and industrial sawing applications FAQ Which materials can this blade cut effectively? The TECWERK machine saw blade is engineered to cut a wide range of materials; its HSS bimetal construction and vacuum‑hardened teeth allow for versatile use across many common workshop substrates. What are the blade’s mounting requirements? The blade has an 8.5 mm bore and a 32 mm width; compatible with machines that accept these dimensions and standard arbors. How fine is the tooth pitch and what finish can be expected? With 6 TPI and set teeth, the blade provides a balance between cutting speed and surface finish, suitable for general production work where throughput and acceptable surface quality are needed. How long can the blade be expected to run before replacement? Service life depends on material, feed and machine settings; the vacuum‑hardened HSS bimetal design of the blade aims to extend tool life and improve wear resistance under typical workshop conditions. What is the exact product reference for ordering? Order using SKU 2000814128NW, labelled as Maschinensägeblatt L400xB32xS1,6mm HSS Loch‑D.8,5mm ZpZ 6 TECWERK Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS bimetal construction, vacuum-hardened treatment and a fine 8 TPI tooth pitch for reliable cutting performance across many workshop tasks; order the blade directly via Metav Werkzeuge or consult the team for application advice. Maschinensägeblatt L400xB32xS2mm HSS ZpZ 8 by TECWERK — vacuum-hardened machine saw blade with 8 TPI A TECWERK machine saw blade designed for general-purpose cutting where a robust HSS bimetal construction and set teeth deliver consistent performance in mixed-material workflows. HSS bimetal construction for robust cutting Vacuum-hardened for enhanced durability 8 TPI with set (staggered) teeth 32 mm width and 2 mm thickness Reliable cuts for mixed-material workshops The combination of HSS bimetal manufacturing and a vacuum-hardened finish creates a blade that resists wear while maintaining a sharp edge for longer intervals, translating into lower downtime and fewer blade changes. With a 32 mm kerf and 2 mm body thickness, the tool balances stiffness and clearance, allowing stable cuts in a range of panels and profiles. The set teeth arrangement reduces binding and helps evacuate swarf, which is particularly advantageous when processing laminated or coated materials. This technical makeup provides measurable efficiency gains in batch work and repeat production. Precision tooth geometry for consistent performance A tooth spacing of 8 TPI offers a versatile compromise between material removal rate and surface finish: the relatively fine pitch supports controlled cutting on thinner stock and achieves a neater edge on composite and metal sheets. The blade’s 8.5 mm bore aligns with common machine spindles, and the overall length of 400 mm corresponds to standard hole spacing, simplifying retrofit into existing saws. Such compatibility reduces setup time and avoids additional adaptations, making the blade a practical choice for production environments where tool changeover speed and repeatability are priorities. Durability and service life that support workflow continuity The HSS bimetal substrate, combined with vacuum hardening, results in improved edge retention under varied loads and entrains a longer service life compared with plain high-speed steel alternatives. In practice, this means fewer interruptions for blade replacement and a lower total tooling requirement for long production runs. The construction is aimed at sustaining performance across different materials, so the blade can be stocked as a general-purpose option within a workshop’s cutting tool inventory, supporting leaner procurement and reliable output. For dependable cutting with TECWERK’s vacuum-hardened HSS bimetal blade, contact Metav Werkzeuge for supply and technical consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814491NW Label: Maschinensägeblatt L400xB32xS2mm HSS Loch-D.8,5mm ZpZ 8 TECWERK Manufacturer: TECWERK Product type: Maschinensägeblatt Packaging unit: 1 Core data Length: 400 mm Width: 32 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth per inch: 8 TPI Features Material: HSS-bimetal Vacuum-hardened treatment Teeth: set / staggered Length = hole spacing (matching standard machines) FAQ What materials can this blade cut effectively? The TECWERK machine saw blade, constructed from HSS bimetal and vacuum-hardened, is intended for cutting a wide range of workshop materials; its set teeth and 8 TPI pitch make it suitable for mixed-material tasks from thin metals to composite panels. Is the bore size compatible with standard saw spindles? Yes, the blade’s 8.5 mm bore matches common spindle fittings and the 400 mm length corresponds to typical hole spacing, minimising the need for adaptations. How does the vacuum-hardening affect blade life? Vacuum-hardening increases edge retention and wear resistance, so the vacuum-hardened TECWERK blade maintains cutting performance longer than non-hardened equivalents, reducing replacement frequency. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of robust cutting performance and broad material compatibility offered by this vacuum‑hardened HSS bimetal saw blade in a compact 400 x 35 x 2 mm format; its set teeth at 8 TPI and a 10.5 mm bore ensure reliable integration into standard machines. Order the machine saw blade directly via Metav Werkzeuge or ask our consultants for application advice. TECWERK Machine saw blade L400 x W35 x T2 mm — HSS bimetal, 10.5 mm bore, 8 TPI The Machine saw blade L400 x W35 x T2 mm is a vacuum‑hardened HSS bimetal blade designed for heavy‑duty production and general workshop sawing across a wide range of materials HSS bimetal construction for durability Vacuum‑hardened cutting edge for prolonged life Set teeth configuration, 8 TPI for versatile cutting 10.5 mm bore for standard machine mounting Consistent cutting performance for mixed materials The vacuum‑hardened HSS bimetal construction delivers a balance of toughness and edge retention that translates into fewer blade changes and uninterrupted production. The combination of a thin 2 mm steel body and a robust cutting strip reduces vibration while maintaining blade stability at higher feed rates. For workshop managers and production planners, this means predictable cycle times and lower downtime through longer service intervals. The set‑tooth geometry supports efficient chip formation, reducing heat build‑up and the risk of premature edge wear. Easy integration and compatibility with common machines With a 10.5 mm bore and an overall length of 400 mm, the blade matches common machine arbors and saw holders used in metalworking and multi‑material production environments. The blade width of 35 mm provides a narrow kerf for efficient material removal while keeping mechanical load minimal. Because the length corresponds to the hole spacing, mounting is straightforward on machines that require precise blade positioning, helping to maintain alignment and repeatability across batches. Safer, cleaner operation with set teeth and optimised tooth pitch The set teeth arrangement and an 8 TPI pitch offer a compromise between fast cutting and controlled finish quality, suitable for a wide variety of ferrous and non‑ferrous materials. The tooth set improves clearance behind the cut, reducing friction and allowing better coolant or air flow in shallow cuts. For operators, this results in smoother cutting action, fewer burrs and reduced need for secondary finishing. Technical terms: “set teeth” means alternate teeth are bent outward to widen the kerf, preventing binding and assisting chip evacuation. Durability, supply reliability and workshop fit‑for‑purpose Sourcing this TECWERK blade through Metav brings not only the component but also dependable logistics and product expertise. Metav’s emphasis on affordable precision and a broad inventory helps workshop buyers consolidate suppliers and maintain steady stock levels. The vacuum‑hardening process applied to the cutting edge is a manufacturing detail that contributes directly to blade longevity — a small manufacturing choice that reduces lifecycle costs and supports consistent quality in daily operations. For robust, vacuum‑hardened HSS cutting tools from TECWERK, contact Metav Werkzeuge in Emmerich for tailored recommendations and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814496NW Label: Maschinensägeblatt L400xB35xS2mm HSS Loch‑D.10,5mm ZpZ 8 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Core measurements Overall length: 400 mm Width: 35 mm Thickness: 2 mm Bore diameter: 10.5 mm Tooth pitch: 8 TPI Design & special features Material: HSS bimetal Tooth type: set teeth Surface treatment: vacuum‑hardened cutting edge Application note: suitable for cutting a wide range of materials Length specification: length corresponds to hole spacing FAQ What materials can this saw blade cut? The TECWERK machine saw blade with HSS bimetal construction is suitable for cutting a wide range of materials; the vacuum‑hardened cutting edge improves wear resistance across both ferrous and non‑ferrous workpieces. How does the 8 TPI tooth pitch affect cutting? An 8 TPI pitch provides a balance between cutting speed and finish quality; it is effective for general‑purpose sawing where moderate surface finish and efficient chip removal are required. Is the 10.5 mm bore compatible with standard saw arbors? Yes, the 10.5 mm bore is intended for common machine arbors; the blade’s 400 mm length corresponds to standard hole spacing for straightforward mounting. What benefit does vacuum hardening provide? Vacuum hardening of the cutting edge increases hardness and edge retention while maintaining core toughness, which extends blade life and reduces the frequency of replacements. How should the blade be mounted to ensure correct alignment? Ensure the blade is seated on the arbor so that the bore and machine spindle engage without play; correct mounting preserves the blade’s tension profile and supports straight, repeatable cuts. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction and a 10 TPI, set-tooth geometry for reliable, uniform cuts across a wide range of workshop tasks; order the blade directly via Metav Werkzeuge or contact the sales team for application advice. Machine saw blade L400 x W32 x T1.6 mm HSS — TECWERK, 10 TPI, 8.5 mm bore The Machine saw blade L400 x W32 x T1.6 mm HSS is a vacuum-hardened, bimetal cutting blade designed for industrial sawing operations where consistent feed and long tool life are required Vacuum-hardened HSS bimetal construction 10 TPI with set teeth for smooth cutting 400 mm length for stable feed 8.5 mm centre bore for secure mounting Durable edge life for demanding production The vacuum-hardened HSS bimetal composition combines a hard cutting edge with a flexible backing, delivering long service life under continuous use and reducing downtime for frequent replacements. The blade’s set teeth are configured to clear chips efficiently, which lowers cutting forces and helps maintain a consistent kerf. For users seeking predictable productivity, this construction translates into fewer interruptions and better overall process stability. Secure fit and steady feed for accurate sawing With a 400 mm overall length and a central 8.5 mm bore, the blade is engineered for stable mounting and reliable tracking on compatible machines. The 32 mm width and 1.6 mm thickness give a balance between rigidity and adaptability, keeping wanders and vibration to a minimum during cross‑cuts and lengthwise feeds. This dimensional stability supports repeatable results and reduces the need for downstream rework. Clear tooth geometry and what it means in practice The blade’s 10 TPI (teeth per inch) specification and set tooth profile are chosen to offer a compromise between fast material removal and a reasonably fine finish. In everyday terms, fewer teeth per inch favour quicker cutting and chip evacuation, while the set ensures the kerf is slightly wider than the blade body to prevent binding. This makes the blade particularly suitable where a steady cut rate and reliable chip clearance are priorities rather than mirror finishes. For dependable workshop performance choose TECWERK blades via Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and supply from Emmerich. Technical data Article number: 2000814132NW Type: Machine saw blade Manufacturer: TECWERK Material: HSS bimetal Length: 400 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Tooth pitch: 10 TPI Tooth set: set (geschränkt) Packaging unit: 1 Facts Vacuum-hardened cutting edge Length corresponds to hole spacing Designed for industrial sawing applications Special features Bimetal high-speed steel construction Set-tooth geometry for chip clearance 8.5 mm centre bore for machine compatibility FAQ What machine types is this blade suitable for? The TECWERK machine saw blade L400 x W32 x T1.6 mm HSS is intended for use on compatible industrial sawing machines that accept a 400 mm blade length and 8.5 mm centre bore. How does the 10 TPI affect cutting results? A 10 TPI configuration on this blade strikes a balance between efficient material removal and acceptable surface quality; the tooth set aids chip evacuation to prevent binding. Is the blade heat-treated or hardened? Yes, the blade features a vacuum-hardened edge, enhancing wear resistance and contributing to longer service life under continuous operation. Which material is the blade made from? The blade is constructed from HSS bimetal, combining a high-speed steel cutting edge with a tough backing for improved durability. What does "length equals hole spacing" imply? This indicates the stated length corresponds to the machine’s mounting pitch, ensuring the blade fits correctly where that specification is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of vacuum‑hardened HSS bimetal durability, 10 tpi staggered teeth and a 10.5 mm arbor hole for reliable, fast cutting and reduced downtime; order the blade directly via Metav Werkzeuge or contact our consultants for technical matching. Machine saw blade L400 x W35 x T2 mm — HSS bimetal, hole Ø10.5 mm, 10 tpi (staggered) — TECWERK The Machine saw blade L400 x W35 x T2 mm HSS Ø10.5 mm 10 tpi TECWERK is a vacuum‑hardened, bimetal blade designed for robust workshop and production cutting across a wide range of materials Vacuum‑hardened HSS bimetal construction Suitable for cutting most materials 10 tpi staggered tooth set 400 mm length with 10.5 mm arbor hole Reliable performance for mixed‑material cutting This vacuum‑hardened HSS bimetal blade combines a high‑speed steel cutting edge welded to a flexible backing, which results in improved durability and resistance against edge breakage. The 10 tpi configuration with staggered teeth delivers an efficient balance between material removal rate and cut smoothness, making the blade suitable for tasks that demand both speed and acceptable finish. For buyers seeking predictable tool life and consistent throughput, the described construction reduces the frequency of blade changes and supports continuous operation. Robust geometry that reduces interruptions With a length of 400 mm, width of 35 mm, and thickness of 2 mm, the blade offers a stable cutting profile that helps avoid excessive vibration and blade wander on larger workpieces. The set teeth arrangement prevents binding and improves chip evacuation, especially when cutting mixed batches or thicker sections. These geometric attributes translate into fewer production interruptions and a steadier cutting pace — a rational advantage for workshops aiming to optimise cycle times. Machine compatibility and mounting clarity The blade’s 10.5 mm arbor hole corresponds to standard machine arbors and, as noted, the blade length equals the hole‑centre spacing required by many machine saws. This makes the blade straightforward to mount on compatible circular saw units without additional adapters. The single‑unit packaging simplifies inventory control and replacement planning in maintenance schedules, helping procurement and maintenance teams manage stock reliably. Proven brand design aimed at industrial demands TECWERK’s approach with this model focuses on a practical balance of economy and endurance: HSS bimetal provides the sharpness retention of high‑speed steel with the backing flexibility needed for everyday workshop use. The vacuum hardening process further strengthens the cutting edge for longer service life, offering manufacturers and trade professionals a pragmatic solution for repetitive cutting tasks. The result is a blade that supports predictable production flows with fewer tool changes and stable quality. For tailored advice on machine compatibility or to source matching blades and mounting accessories, contact Metav Werkzeuge — Metav’s specialists will help specify the right TECWERK blade and ensure a smooth supply for the workbench. Technical Data Article number: 2000814497NW Product: Machine saw blade L400 x W35 x T2 mm, HSS bimetal, hole Ø10.5 mm, 10 tpi, staggered, TECWERK Facts Length: 400 mm Width: 35 mm Thickness: 2 mm Hole diameter: 10.5 mm Teeth: 10 tpi Packaging unit: 1 Materials & Features Material: HSS bimetal Tooth set: staggered Vacuum‑hardened blade Suitable for cutting most materials FAQ Is this blade suitable for cutting steel and non‑ferrous metals? The TECWERK machine saw blade 2000814497NW, made from HSS bimetal and vacuum hardened, is designed to cut a wide range of materials including many steels and non‑ferrous metals; performance will vary with material thickness and feed rate. What does 10 tpi mean for cutting performance? Ten teeth per inch (10 tpi) indicates a medium‑coarse tooth pitch that provides faster material removal with a practical surface finish; the staggered tooth set helps prevent binding and improves chip clearance. Will the 10.5 mm hole fit standard machine arbors? The 10.5 mm arbor hole is compatible with many industrial circular saw arbors; the blade’s 400 mm overall length is matched to the common hole‑centre spacing of relevant machines. How does vacuum hardening affect blade life? Vacuum hardening increases the cutting edge hardness without compromising the backing flexibility of the bimetal construction, resulting in longer edge retention and fewer blade changes during production. Is the blade supplied individually or in packs? This blade is supplied as a single unit (packaging unit: 1), which simplifies stocking and replacement planning for individual machines. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of vacuum‑hardened HSS‑bimetal construction, universal cutting capability and a precise 8.5 mm bore for quick replacement; order the blade directly via Metav Werkzeuge or consult our specialists for application guidance. Machine saw blade L400 x W32 x T2 mm, HSS‑bimetal, bore Ø 8.5 mm, 14 tpi – TECWERK The Machine saw blade L400 x W32 x T2 mm, HSS‑bimetal offers a vacuum‑hardened cutting solution for workshop and light industrial ripping, cross‑cut and general panel work with standard machine arbors Vacuum‑hardened HSS‑bimetal construction Universal cutting for most materials 8.5 mm bore for standard arbors 14 tpi with set teeth for fast chip removal High cutting performance with dependable materials The vacuum‑hardened HSS‑bimetal design delivers a resilient cutting edge that maintains form under continuous load, enabling reliable performance across a broad range of workpieces. With a 400 mm length and optimised tooth geometry, the blade balances cutting speed and edge life; this results in efficient throughput and reduced downtime. The construction suits shops that prioritise repeatable, high‑quality cuts without frequent blade changes, supporting sustained production runs and predictable maintenance intervals. Accurate fit and quick change for steady workflow A precise 8.5 mm bore and the specification that the length equals hole spacing simplify siting and replacement on compatible machines. The 14 tpi tooth count combined with set teeth encourages active chip evacuation and reduces heat build‑up, which helps maintain dimensional stability in the cut. These features mean quicker cycle times and fewer interruptions for blade service, creating measurable efficiency benefits in daily workshop operations and mixed‑material production. Robust dimensions and workshop suitability With a 32 mm width and 2 mm thickness, the blade provides lateral stability and straightness in cross‑sectional cuts, making it appropriate for panel sawing and general purpose metal/wood/composite operations where a balance of rigidity and cutting action is required. The design is described as suitable for cutting almost any material, offering flexibility across job types and reducing the need for multiple specialised blades. Supplied as a single unit, the item is simple to stock and replace within an organised tooling setup. For consistent shop performance, select the TECWERK vacuum‑hardened HSS‑bimetal saw blade and contact Metav Werkzeuge for expert advice and reliable delivery from Emmerich. Technical data SKU: 2000814493NW Product: Machine saw blade L400 x W32 x T2 mm, HSS‑bimetal, bore Ø 8.5 mm, 14 tpi, TECWERK Article type: Machine saw blade Packaging unit: 1 Facts Overall length: 400 mm Width: 32 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth: 14 tpi Special features Material: HSS‑bimetal Vacuum‑hardened blade Set (alternating) teeth Suitable for cutting a wide range of materials Length equals hole spacing FAQ What materials can this blade cut effectively? The TECWERK machine saw blade is specified as a vacuum‑hardened HSS‑bimetal tool designed for cutting a wide variety of materials, making it suitable for mixed‑material workshop tasks. Is the 8.5 mm bore compatible with common table saw arbors? Yes, the 8.5 mm bore matches many standard arbors; for any non‑standard spindles the axle spacing and bore size listed for the blade should be checked against the machine's specifications. How does the 14 tpi tooth count affect cutting results? A 14 tpi tooth count with set teeth offers a compromise between smoothness and rapid material removal, promoting efficient chip clearance and reduced heat generation during continuous cuts. Can this blade be used for both ripping and cross‑cutting? The blade's design and HSS‑bimetal composition make it versatile for both ripping and cross‑cutting on compatible machines, providing consistent performance across typical workshop applications. How is the blade supplied and what is the ordering unit? The item is supplied as a single piece per packaging unit (packaging unit: 1) and is identified as SKU 2000814493NW for ordering and inventory tracking. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction and 10 TPI tooth configuration for reliable, long-lasting cutting performance; combined with a 32 mm blade width and 8.5 mm centre bore, this tool supports precise mounting and versatile application. Order the blade directly via Metav Werkzeuge or consult the team for technical guidance. TECWERK machine saw blade L400 x 32 x 2 mm (HSS bimetal) – 10 TPI, 8.5 mm bore A TECWERK machine saw blade designed for general-purpose cutting across many materials on industrial saws and production lines. HSS bimetal, vacuum-hardened blade 10 TPI for versatile cutting 8.5 mm centre bore for standard arbors 400 mm length aligns with hole spacing Consistent cutting performance and extended service life This blade’s HSS bimetal construction and vacuum-hardened treatment deliver a balance of wear resistance and edge toughness that reduces frequent replacements and downtime. The bimetal design bonds a high-speed steel cutting edge to a spring steel body, which provides resilience under load and maintains sharpness over extended runs. For workshop managers seeking measurable productivity improvements, the combination of durability and predictable life span supports more efficient planning and fewer unscheduled changes. Accurate fitment and reliable run quality With a 400 mm overall length and an 8.5 mm centre bore the blade matches common machine arbors; the 32 mm blade width and 2 mm thickness help preserve stability during cuts. The set (staggered) teeth and 10 TPI layout contribute to controlled chip formation and reduced vibration, which improves surface finish and reduces strain on the saw drive. These characteristics make the blade suitable for repetitive cutting tasks in production shops where consistent, clean cuts are required. Versatility across materials with straightforward handling Marked as suitable for cutting a wide range of materials, the blade’s geometry and 10 TPI tooth spacing enable efficient severing of both softer and harder stock without complex setup changes. The specification that length equals hole spacing facilitates straightforward replacement and inventory management; a single variant can cover multiple machines with the same arbor configuration. Maintenance remains simple: inspect tooth condition regularly and replace the blade when edge wear begins to affect cut quality rather than attempting repeated regrinding. Contact Metav Werkzeuge for technical advice and reliable supply of TECWERK HSS bimetal machine saw blades directly from Emmerich Technical data Article number: 2000814492NW Product type: Machine saw blade Brand: TECWERK Facts Length: 400 mm Width: 32 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth: 10 TPI Special features HSS bimetal material Vacuum-hardened Teeth set (staggered) Length corresponds to hole spacing Pack quantity: 1 FAQ Which materials can this blade cut effectively? The TECWERK machine saw blade with HSS bimetal construction is specified for cutting a broad range of materials; its vacuum-hardened edge is intended to offer good wear resistance across typical workshop materials. What does 10 TPI mean for cutting performance? A 10 TPI tooth arrangement provides a compromise between fast stock removal and acceptable finish; the 10 TPI layout on this blade suits mixed-material production where versatility is prioritised. Will this blade fit my saw’s arbor? The blade has an 8.5 mm centre bore; compatibility depends on the machine’s arbor diameter and any required bushings, so confirm arbor measurements against the SKU 2000814492NW before ordering. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS-bimetal construction and vacuum-hardened cutting edge for extended life, paired with a practical 10.5 mm arbor hole that simplifies mounting; order the machine saw blade directly via Metav Werkzeuge or ask our consultants if further advice is needed. TECWERK machine saw blade L400 x B35 x S2 mm — HSS-bimetal, 6 TPI, 10.5 mm arbor A machine saw blade L400 x B35 x S2 mm HSS by TECWERK designed for reliable, general-purpose cutting in workshop and industrial machines HSS bimetal construction for durability Vacuum-hardened cutting zone for longer life 6 TPI for versatile cutting across materials 10.5 mm arbor hole for standard machine mounts Consistent cutting performance for mixed materials The HSS-bimetal construction combines a wear-resistant cutting edge with a resilient backing material, delivering a balance of toughness and edge retention that benefits everyday workshop environments. With a tooth pitch of 6 TPI, the blade is optimised for medium-to-fine cuts, making it suitable for a broad range of tasks from thin sections to general-purpose panel cutting. The vacuum-hardened treatment increases resistance to abrasion and thermal stress, reducing the frequency of blade changes and contributing to uninterrupted production runs. Designed to reduce downtime and maintenance A blade that stays sharp longer leads to fewer tool changes and less machine downtime. The vacuum-hardened cutting edge and the bimetal design ensure that the saw keeps cutting even under continuous use, which translates into measurable productivity gains. The 10.5 mm arbor hole matches common mounting standards, enabling fast replacement and secure fitting. Where longer uninterrupted cycles are essential, this saw blade offers a pragmatic combination of longevity and easy handling that supports streamlined workshop workflows. Practical dimensions and tooth geometry for everyday use The nominal dimensions 400 x 35 x 2 mm describe a compact geometry that fits many machine setups without overloading the spindle. The saw’s set tooth geometry (geschränkt) assists chip evacuation and reduces friction on the cut face, which helps avoid overheating and improves surface finish. For applications where clean cutting and reduced burrs are important, this tooth configuration delivers practical benefits while maintaining cutting speed. Compatibility, material range and application note The blade’s general-purpose specification and robust build make it suitable for a wide variety of common workshop materials. While named for universal cutting, selection for specialised substrates should consider tool life and cut quality expectations. The combination of HSS-bimetal and the heat treatment process means the blade tolerates demanding use better than standard high-speed steel alone, making it a dependable choice for everyday production and repair tasks. For straightforward procurement or expert advice on integrating this TECWERK saw blade into existing machinery, contact Metav Werkzeuge for tailored recommendations and reliable supply from Emmerich. Technical data Article number: 2000814495NW Label: Maschinensägeblatt L400xB35xS2mm HSS Loch-D.10,5mm ZpZ 6 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Specifications Length: 400 mm Width: 35 mm Thickness: 2 mm Arbor hole: 10.5 mm Teeth: 6 per inch (6 TPI) Packaging unit: 1 Features Material: HSS-bimetal Vacuum-hardened cutting zone Teeth: set (geschränkt) Length equals hole spacing (length = hole spacing) Suitable for general-purpose workshop cutting FAQ What machines is this saw blade compatible with? Compatibility depends on the machine’s blade dimensions and arbor. The TECWERK machine saw blade L400 x B35 x S2 mm fits machines accepting a 400 × 35 × 2 mm blade with a 10.5 mm arbor hole. Which materials can be cut with this blade? The HSS-bimetal design and vacuum-hardening make the blade suitable for a wide range of workshop materials; the blade is intended for general-purpose cutting rather than specialised hard-to-machine alloys. How does the 6 TPI tooth count affect cutting? A 6 TPI pitch offers a balance between cutting speed and finish, making the blade versatile for medium-thickness panels and common workshop tasks. Is the blade suitable for continuous industrial use? The vacuum-hardened edge and bimetal construction improve wear resistance, so the blade is appropriate for frequent use; however, application-specific trials are recommended for heavy-duty continuous production. What does "set teeth" mean for cutting performance? Set (geschränkt) teeth alternate to create a kerf wider than the blade body, improving chip evacuation and reducing friction for smoother cutting. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction and a 10.5 mm bore for secure mounting, together with a 400 mm length and set teeth that balance material removal and surface quality. Order the machine saw blade directly via Metav Werkzeuge or ask the consultants for application guidance. Machine saw blade L400×B35×S2 HSS (10.5 mm bore, 4 TPI) – TECWERK A machine saw blade L400×B35×S2 HSS engineered for versatile, heavy-duty cutting tasks in production and workshop environments, combining robust construction with straightforward fitment for standard machines Vacuum-hardened HSS bimetal blade 400 mm length for standard machines 35 mm width for stable guidance 4 TPI set teeth for versatile cutting Durable construction for continuous operation The vacuum-hardening process and HSS bimetal composition deliver a blade that resists wear and maintains edge geometry under sustained use. This construction increases cutting life while reducing the frequency of blade changes, supporting continuous production runs. The set teeth reduce binding and heat buildup during cutting, which improves performance on mixed workloads and helps keep maintenance intervals predictable. Balanced tooth geometry for mixed materials With 4 teeth per inch (4 TPI) the tooth spacing offers a compromise between material removal rate and finish quality. The geometry is suited to applications where moderate feed rates and reliable chip evacuation are required, making the blade a practical choice for a variety of tasks. The coarse-but-controlled pitch and the set tooth configuration support consistent cutting behaviour across differing workpiece types without sacrificing edge life. Straightforward mounting and machine compatibility The 10.5 mm bore provides a precise reference for mounting to machines with the matching arbour; the blade’s 400 mm overall length corresponds to the hole spacing specified by the manufacturer for easy replacement. The 35 mm width enhances lateral stability during cuts, reducing vibration and promoting truer runs. If machine arbour dimensions or mounting details are uncertain, Metav Werkzeuge’s technical team is available to advise on compatibility and fitment. Reliability and supply from an experienced partner Sourcing this blade through Metav Werkzeuge ensures access to a broad range of workshop supplies backed by a quality-controlled EU distribution centre. Metav combines decades of industry knowledge with a comprehensive product range, supporting dependable supply and fast order handling — a practical advantage for busy workshops that rely on consistent availability rather than guesswork. For procurement and technical advice on the TECWERK vacuum-hardened HSS bimetal saw blade, contact Metav Werkzeuge for order placement and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000814494NW Type: Machine saw blade Manufacturer: TECWERK Packaging unit: 1 Specifications Overall length: 400 mm Width: 35 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth: 4 per inch (TPI) Special features Material: HSS bimetal Vacuum-hardened blade Set teeth Length equals hole spacing FAQ Which materials can this TECWERK blade cut? The TECWERK machine saw blade L400×B35×S2 HSS is designed for cutting a wide range of materials; the vacuum-hardened HSS bimetal construction supports extended edge life across mixed workloads. What does 4 TPI mean for cutting performance? A 4 TPI pitch provides a balance between chip removal and surface finish; for the TECWERK blade this results in steady material removal with acceptable finish quality in many general-purpose applications. How is the blade mounted to a machine? Mounting requires a matching arbour for the 10.5 mm bore; the blade’s overall length of 400 mm aligns with the hole spacing used on compatible machine models. Are the teeth set or ground? The teeth on this TECWERK blade are set (geschränkt), which improves chip clearance and reduces the risk of clogging during through-cuts. What factors influence the blade’s service life? Service life for the TECWERK HSS bimetal blade depends on the material being cut, feed and speed, and cooling/lubrication practices; vacuum-hardening enhances durability but routine inspection is recommended. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the vacuum‑hardened HSS bimetal construction and staggered teeth for reliable, fast cutting across a broad range of materials; the 400 × 32 × 2 mm format with an 8.5 mm bore ensures straightforward machine compatibility. Order the blade directly via Metav Werkzeuge or consult our specialists for selection advice. Machine saw blade L400 × 32 × 2 mm, HSS bimetal – TECWERK (bore 8.5 mm, 4 TPI) Machine saw blade L400 × 32 × 2 mm, HSS bimetal designed as a vacuum‑hardened machine blade for coarse, efficient cutting in demanding workshop and production environments. Vacuum‑hardened HSS bimetal construction Staggered (set) teeth for robust cutting 400 × 32 × 2 mm for standard machine fit 8.5 mm bore with 4 TPI for coarse feeds Durable cutting performance for heavy use The combination of HSS bimetal and vacuum hardening provides a blade that resists premature wear and keeps its cutting geometry under load. Vacuum hardening reduces internal stresses and improves toughness so that the blade maintains consistent cutting behaviour during longer runs. For workshop and light industrial environments this translates into fewer blade changes and less machine downtime, supporting a smoother production flow and predictable throughput. Coarse tooth geometry for fast material removal A 4 TPI tooth pitch with staggered (set) teeth is designed to remove material quickly while minimising clogging on mixed or fibrous stocks. This geometry suits operations that prioritise feed rate and rapid throughput over ultra‑fine finishes; the result is faster cut‑through times with acceptable surface quality for many general fabrication tasks. The staggered teeth also help to reduce cutting forces and vibration, supporting steadier feeds and longer tool life. Straightforward fitment and machine compatibility With overall dimensions of 400 × 32 × 2 mm and an 8.5 mm bore, the blade fits machines that accept this standard mounting and length‑to‑hole spacing. The specification “length = hole spacing” ensures correct engagement with standard arbors and mounting systems. The relatively slim 2 mm thickness balances rigidity and cutting clearance, making this blade a pragmatic choice for machines where a combination of strength and efficient chip evacuation is required. Practical handling, maintenance and application range The TECWERK machine saw blade is supplied as a single unit and requires standard mounting procedures. The HSS bimetal edge resists chipping compared with high‑speed steel edges alone, offering predictable resharpening intervals where applicable. Although optimised for coarse cutting, the blade’s construction permits use across a wide spectrum of materials; operators benefit from straightforward replacement routines and a robust performance profile that supports both one‑off jobs and repetitive batch work. For robust, vacuum‑hardened cutting performance from a machine saw blade built for coarse, efficient material removal, contact Metav Werkzeuge for procurement and technical advice — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814123NW Label: Maschinensägeblatt L400xB32xS2mm HSS Loch-D.8,5mm ZpZ 4 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Facts Length: 400 mm Width: 32 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth per inch: 4 SKU / UID: 2000814123NW Special features HSS bimetal Vacuum‑hardened blade Staggered (set) teeth Length equals hole spacing Designed for coarse, fast cutting across many materials FAQ What materials can this machine saw blade cut? The machine saw blade L400 × 32 × 2 mm (HSS bimetal) is vacuum‑hardened and configured for coarse cutting, making it suitable for a wide range of materials commonly encountered in workshop use; check cutting parameters with the machine and workpiece before full‑scale operation. Is the 8.5 mm bore compatible with standard arbors? Yes, the blade’s 8.5 mm bore and the specified length‑to‑hole spacing are intended for compatibility with machines that accept this mounting dimension; confirm arbor sizes before fitting the blade 2000814123NW. How does the 4 TPI tooth pitch affect cutting? A 4 TPI (teeth per inch) pitch provides coarse, aggressive material removal; the staggered teeth reduce clogging and vibration, delivering faster feed rates where surface finish is a secondary concern. Can the blade be resharpened or is it disposable? The HSS bimetal edge of this TECWERK blade extends service life compared with simple HSS; depending on wear and the specific application, resharpening may be possible — assess blade condition and consult standard workshop practices. What are the main advantages of the vacuum‑hardening process? Vacuum hardening improves toughness and reduces internal stresses in the HSS bimetal construction, resulting in better edge retention and longer service life under continuous cutting loads. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund