Take advantage of a vacuum-hardened HSS bimetal construction and staggered tooth geometry for long blade life and reliable cutting across a wide range of materials; order the blade directly via Metav Werkzeuge or consult our specialists for compatibility advice. TECWERK Machine saw blade L400 x B32 x S2 mm HSS bimetal, Ø 8.5 mm, 6 TPI The TECWERK machine saw blade designed for industrial metalworking and workshop machines, delivering coarse, fast cuts with robust HSS bimetal construction and a standard 8.5 mm mounting bore. HSS bimetal construction for wear resistance Vacuum-hardened blade for prolonged life Staggered teeth to reduce binding and burrs 6 TPI for fast, coarse cutting Durable construction for reduced tooling costs The HSS bimetal design combines a wear-resistant high-speed steel cutting edge with a resilient backing, which translates into consistent edge life and fewer blade changes in daily production. The vacuum-hardened treatment further enhances toughness, helping to maintain cutting geometry under load. For workshop managers and procurement, this means lower running costs and less downtime due to blade failure; the construction is especially advantageous where frequent, coarse cuts are required. Fast, efficient cutting with stable geometry With a 6 TPI (teeth per inch) pitch and staggered teeth, the blade achieves high material removal rates while limiting clogging and overheating. The 32 mm blade width and 2 mm thickness provide lateral stability during sawing, reducing vibration and improving cut straightness. The 8.5 mm bore ensures compatibility with many machine arbors; combined, these characteristics deliver predictable cycle times and repeatable results for workshop production runs. Compatibility and practical workshop benefits The 400 mm length aligns with standard machine setups where blade length corresponds to hole spacing, simplifying replacement and inventory management. Supplied as a single unit, the blade is ready for immediate fitting and offers broad applicability across metalworking tasks. The engineered combination of coarse pitch and robust material handling capability makes it suitable for general-purpose cutting tasks where speed and tool life are priorities. Contact Metav Werkzeuge in Emmerich for application advice, compatibility checks or to request a tailored quote by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814490NW Name: Maschinensägeblatt L400xB32xS2mm HSS Loch-D.8,5mm ZpZ 6 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Facts Overall length: 400 mm Blade width: 32 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth: 6 TPI Special features Material: HSS bimetal Vacuum-hardened Teeth set (staggered) Length corresponds to hole spacing (machine compatibility) FAQ What materials can this blade cut effectively? This TECWERK machine saw blade, with its HSS bimetal construction and vacuum-hardening, is intended for sawing a broad range of materials in workshop environments; suitability depends on material hardness and machine setup. Which machines fit the 8.5 mm bore? Many standard machine arbors accept an 8.5 mm bore; verify your machine's arbor specification and consult Metav Werkzeuge for compatibility with the TECWERK machine saw blade (SKU 2000814490NW). How does the 6 TPI pitch affect cutting? The 6 TPI coarse pitch enables faster material removal and is well suited to rough, general-purpose cutting; the staggered tooth set helps prevent binding and improves chip evacuation. Is the blade supplied ready to fit? The blade is supplied as a single unit and is ready for installation; ensure the machine arbor and tensioning meet the blade and machine manufacturer's guidance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction combined with precise 400 x 25 x 1.25 mm dimensions and a standard 8.5 mm bore for reliable machine integration; order the blade directly via Metav Werkzeuge or request advice from our consultants for seamless workshop setup. Machine saw blade L400 x W25 x T1.25 mm, HSS bimetal, Bore Ø 8.5 mm, 14 TPI — TECWERK The machine saw blade L400 x W25 x T1.25 mm, HSS bimetal, Bore Ø 8.5 mm, 14 TPI is a vacuum-hardened production blade designed for general-purpose sawing tasks in industrial and workshop machines. HSS bimetal, vacuum-hardened for long life 400 x 25 x 1.25 mm dimensions for machine use 14 TPI with set teeth for versatile cutting 8.5 mm bore for standard machine arbors Consistent performance through hardened HSS bimetal construction The vacuum-hardening process applied to the HSS bimetal substrate increases wear resistance and thermal stability, which translates into longer life and fewer tool changes during continuous production. For operations that demand reproducible cuts and predictable tool behaviour, the hardened edge reduces micro-chipping and retains sharpness under heat. This yields a measurable improvement in productivity through extended runtimes and lower downtime compared with non-hardened alternatives. Accurate fit and machine-ready dimensions for simple replacement With 400 x 25 x 1.25 mm nominal dimensions and an 8.5 mm bore, the blade is specified for direct mounting in compatible circular sawing machines. The length corresponds to the hole spacing of standard machine fittings, ensuring correct alignment and secure fixation. Clear dimensional data simplifies stock planning and spare-part management in the workshop, enabling rapid exchange and minimising interruption to machining cycles. Tooth geometry tuned for versatile, clean cuts The 14 TPI tooth pitch combined with set (geschränkt) teeth offers a balance between feed rate and finish, producing controlled chip formation across a broad spectrum of materials. A finer pitch improves edge quality on thinner sections, while the set teeth reduce binding when cutting mixed or composite workpieces. The result is a reliable compromise between cut speed and surface finish, suitable for batch production and maintenance tasks alike. Practical advantages for workshop workflows As a machine-grade blade, the product supports efficient workshop logistics: reduced frequency of blade changes, predictable wear patterns and compatibility with standard arbors lower total process costs. The vacuum-hardened HSS alloy minimises thermal softening during aggressive sawing cycles, helping to maintain cut quality over longer runs. For procurement and planners, the clearly defined specifications allow straightforward integration into existing maintenance schedules and inventory systems. For workshop-ready performance, choose the TECWERK vacuum-hardened HSS bimetal blade via Metav Werkzeuge — Metav’s advisors can confirm machine compatibility and supply logistics at Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: 2000814489NW Article: Machine saw blade Manufacturer: TECWERK Material: HSS bimetal Dimensions: 400 x 25 x 1.25 mm Bore diameter: 8.5 mm Tooth pitch: 14 TPI Tooth form: set (geschränkt) Facts Length: 400 mm Width: 25 mm Thickness: 1.25 mm Bore Ø: 8.5 mm Pitch: 14 TPI Special features Vacuum-hardened HSS bimetal Length equals hole spacing (length = hole spacing) Suitable for cutting a wide range of materials Packaged unit: 1 FAQ What range of materials can this blade cut? The TECWERK machine saw blade with vacuum-hardened HSS bimetal construction is engineered for a wide variety of materials; suitability depends on material thickness and feed parameters, with the hardened edge providing extended life in mixed workloads. Which machines accept this blade? Machines with an arbor accommodating an 8.5 mm bore and a blade length matching the machine's hole spacing will accept this saw blade; the listed dimensions (400 x 25 x 1.25 mm) indicate machine compatibility and mounting requirements. What does 14 TPI and set teeth mean for cutting? A 14 TPI (teeth per inch) pitch offers a trade-off between cutting speed and finish. Set teeth create a kerf wider than the blade body to reduce friction and prevent binding, improving chip evacuation and control during sawing. How often should the blade be inspected or replaced? Inspection intervals depend on operating hours and material aggressiveness; signs for replacement include increased cutting forces, poorer surface finish or visible tooth damage. Regular checks during scheduled maintenance protect machine and workpiece quality. Is this blade suitable for high-temperature or continuous operation? The vacuum-hardening of the HSS bimetal improves thermal resistance compared with standard blades, making it more resilient in prolonged cycles; however, actual performance will vary with specific machine speeds and material properties. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum‑hardened HSS bimetal construction and a balanced 10 TPI set tooth for a reliable mix of cutting speed and edge life; compatibility with standard spindles is ensured by the 8.5 mm bore and 400 mm length, which corresponds to the hole spacing. Order the blade directly via Metav Werkzeuge or consult our specialists for technical fitment. Machine saw blade L400 x W25 x T1.25 mm, HSS, bore Ø8.5 mm, 10 TPI — TECWERK The Machine saw blade L400 x W25 x T1.25 mm, HSS, bore Ø8.5 mm, 10 TPI (TECWERK) is a vacuum‑hardened, set‑tooth blade designed for general‑purpose cutting in industrial workshop environments. HSS bimetal construction for robust durability Vacuum-hardened blade for extended life Set teeth, 10 TPI for universal cutting 400 mm length with 8.5 mm bore for standard mounting High productivity through balanced tooth geometry and material choice The combination of HSS bimetal and a vacuum‑hardened treatment delivers a blade that resists wear while preserving a sharp cutting profile. The 10 TPI pitch is selected to offer a compromise between cutting speed and surface finish—suitable where a controlled kerf and consistent feed are priorities. The set teeth reduce binding in mixed materials and help clear chips efficiently; this translates into longer run times and fewer interruptions in production, promoting a continuous workflow. Design that lowers maintenance and improves uptime A 25 mm width and 1.25 mm thickness provide lateral stability during cutting and reduce vibration, which in turn helps protect both the saw and workpiece. The robust build reduces the frequency of blade changes and downtime, supporting steady throughput on shop‑floor machines. The specification that the 400 mm overall length equals the hole spacing simplifies inventory management and replacement, so maintenance routines stay predictable and efficient. Easy integration with existing machines and straightforward handling The 8.5 mm bore accommodates common machine arbors, enabling quick mounting without adaptors on many standard setups. Supplied as a single unit, the blade is ready for immediate installation; the HSS bimetal edge tolerates a variety of cutting tasks, allowing the blade to be used across jobs without constant tool changes. For a successful fit, verify the spindle bore and blade tension settings of the host machine before commissioning the blade to ensure optimal performance. Contact Metav Werkzeuge today for tailored technical advice and to secure this TECWERK HSS bimetal machine saw blade with the correct mounting specifications for the workshop. Technical data Article number: 2000814488NW Product label: Maschinensägeblatt L400xB25xS1,25mm HSS Loch-D.8,5mm ZpZ 10 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Facts Length: 400 mm Width: 25 mm Thickness: 1.25 mm Bore diameter: 8.5 mm Teeth per inch: 10 Special features Material: HSS bimetal Tooth style: set teeth Vacuum-hardened blade Length equals hole spacing Balanced for universal cutting applications FAQ What materials can this blade cut efficiently? The TECWERK machine saw blade (L400 x W25 x T1.25 mm) with HSS bimetal construction is designed for cutting a wide range of workshop materials; the 10 TPI and set teeth balance cutting speed and chip evacuation for general‑purpose tasks. Is the bore size compatible with standard machines? Yes, the blade is supplied with an 8.5 mm bore, which fits common machine arbors; confirm the host spindle diameter and mounting method to ensure correct installation of the TECWERK blade. How does vacuum hardening affect blade life? Vacuum hardening increases surface hardness while maintaining a tough core in the HSS bimetal, improving wear resistance and extending service intervals for the machine saw blade. Can the blade be resharpened or is it disposable? The HSS bimetal edge may be reconditioned in many cases; assess wear patterns and consult the polishing or resharpening services available through workshop maintenance providers before replacing the blade. What does 10 TPI mean for the finished edge? A 10 teeth per inch pitch provides a compromise between material removal rate and edge finish, offering a consistent kerf and manageable feed for mixed applications where both speed and acceptable surface quality are needed. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum‑hardened HSS bimetal construction and a set‑tooth 8 TPI geometry for reliable, versatile cutting in production environments; order the blade via Metav Werkzeuge or contact our advisors for application guidance. TECWERK machine saw blade L 400 × B 32 × S 1.6 mm, HSS bimetal, Ø 8.5 mm bore, 8 TPI The TECWERK machine saw blade L 400 × B 32 × S 1.6 mm is a vacuum‑hardened HSS bimetal cutting blade designed for machine sawing across a wide range of materials, with set teeth and an 8 TPI pitch for general‑purpose industrial use HSS bimetal construction for long life Vacuum‑hardened for extended wear resistance Set teeth, 8 TPI for versatile cutting Bore Ø 8.5 mm, nominal 400 mm length Efficient cutting performance for mixed materials This HSS bimetal circular product delivers a balance of durability and cutting performance suitable for workshops and production lines. The vacuum‑hardened treatment increases edge life and resistance to thermal stress, so the blade maintains its cutting geometry over longer runs. With a set‑tooth configuration at 8 TPI, the geometry is aimed at general‑purpose sawing where a compromise between chip removal and surface finish is required. The combination of HSS bimetal and vacuum hardening reduces edge breakage during intermittent feeds and mixed‑material jobs. Compact design that integrates into standard machines With a nominal length of 400 mm, a width of 32 mm and a thickness of 1.6 mm, this blade matches common machine saw spindle arrangements where a bore Ø 8.5 mm is required. The slim kerf helps reduce material loss while the construction maintains lateral stability for straight cutting. The specification "length equals hole spacing" indicates that the overall blade dimension corresponds to typical mounting centres, simplifying compatibility checks when replacing worn blades. These measurable values make planning and inventory straightforward for purchasing and maintenance teams. Practical handling, mounting and operational benefits The product's measured dimensions and the central 8.5 mm bore allow quick installation on machines designed for this shaft size. The set teeth assist chip evacuation, reducing heat build‑up in many applications and lowering the risk of clogging when cutting non‑ferrous and mixed materials. The blade is supplied as a single unit, enabling straightforward stock control. For technical queries about machine compatibility or suggested feed rates, Metav Werkzeuge provides application advice and can supply additional specifications on request. Why this blade suits workshops and production halls Built for repeated industrial use, the blade combines robust HSS bimetal engineering with process reliability. The design minimises downtime through improved edge life and predictable wear behaviour, supporting a more consistent production flow. As part of Metav’s precision range, it fits the company’s approach to democratise precision tooling: high‑accuracy products available to small workshops as well as large facilities, backed by practical supply and advice from a central European stock point. Contact Metav Werkzeuge for availability and tailored application advice on the TECWERK machine saw blade; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss machine compatibility and delivery options Technical Data Article number: 2000814130NW Manufacturer: TECWERK Product type: Machine saw blade Facts Length: 400 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth: 8 TPI Special features Material: HSS bimetal Vacuum‑hardened Set teeth (geschränkt) Length corresponds to hole spacing Packaging unit: 1 FAQ What materials can this blade cut effectively? The TECWERK machine saw blade with HSS bimetal construction and set teeth is designed for cutting a broad range of materials in general industrial applications; consult Metav Werkzeuge for specific material recommendations. Is the bore size compatible with standard machines? Yes, the blade has a bore of 8.5 mm, which fits machines designed for that shaft diameter; check the machine mounting specifications to confirm compatibility. How does vacuum hardening affect blade life? Vacuum hardening improves wear resistance and thermal stability, so the blade retains its cutting edge longer under typical production conditions. What is the kerf and how does it influence material waste? The blade thickness is 1.6 mm, providing a slim kerf that reduces material loss while keeping sufficient rigidity for straight cuts. Can this blade be used in automated production lines? The blade’s dimensions and HSS bimetal build make it suitable for machine sawing operations; Metav Werkzeuge can advise on feed rates and mounting for automated setups. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Reliable cutting performance and extended service life result from the combination of HSS bimetal construction and vacuum-hardened finishing; the compact 1.6 mm thickness and 14 TPI tooth form deliver precise, economical cuts across diverse applications. Order the blade through Metav Werkzeuge or contact their consultants for tailored technical advice. Machine saw blade L400×W32×T1.6 mm HSS, Bore Ø8.5 mm, 14 TPI – TECWERK The Machine saw blade L400×W32×T1.6 mm HSS, Bore Ø8.5 mm, 14 TPI – TECWERK is a vacuum-hardened bimetal blade for industrial sawing tasks, designed for stable mounting and consistent cut quality in production environments HSS bimetal, vacuum-hardened 400 mm length, 8.5 mm bore 14 TPI with staggered teeth 1.6 mm blade thickness High durability and consistent cutting performance for production The blade, manufactured from HSS bimetal, combines hardness with a degree of flexibility that resists premature failure under intermittent shock loads. The vacuum-hardened treatment enhances edge retention and reduces wear, which in turn lowers tooling change frequency and downtime. With a medium tooth pitch of 14 TPI, the geometry supports fine, controlled cuts while maintaining feed stability. These properties translate into measurable productivity gains in repetitive sawing tasks and reduced waste from rework. Efficient material handling without frequent blade changes Thanks to the combination of a narrow kerf and robust tooth construction, the saw offers versatile performance across many workshop jobs. The 1.6 mm thickness keeps the kerf slim to limit material loss and required cutting force, while the staggered teeth disperse cutting loads to reduce vibration and chip build-up. For operations where both throughput and surface finish matter, this blade balances cutting speed and edge quality, helping to meet production schedules with fewer interventions. Secure mounting and straightforward installation in standard machines The overall length corresponds to the hole spacing found on common machine arbors, and the 8.5 mm bore ensures a secure fit for compatible mandrels. When fitted correctly, the blade delivers stable rotation and constant cutting geometry, which supports repeatable part quality in batch production. The product name is purposely descriptive to simplify identification during procurement and inventory management, aiding rapid replacement and reduced machine idle time. Practical economy: longer life, less downtime A tool that lasts longer per cutting hour immediately improves the cost-per-part metric. The blade’s construction reduces the frequency of replacements and the need for intermediate sharpening, delivering a favourable return in typical workshop and light industrial settings. Combined with Metav’s supply chain reliability, integrating this blade into a tooling programme supports predictable lead times and inventory planning without compromising cutting quality. For tailored advice on the TECWERK machine saw blade or fast supply from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert assistance and reliable delivery Technical data Article number: 2000814134NW Product: Machine saw blade (Maschinensägeblatt) Brand: TECWERK Facts Overall length: 400 mm Width: 32 mm Thickness: 1.6 mm Bore diameter: 8.5 mm Teeth: 14 TPI Tooth form: Staggered Special features Material: HSS bimetal Vacuum-hardened Length corresponds to hole spacing Suitable for a wide range of materials FAQ What materials can this machine saw blade cut effectively? The TECWERK machine saw blade L400×W32×T1.6 mm HSS, Bore Ø8.5 mm, 14 TPI is specified as a vacuum-hardened HSS bimetal blade designed for sawing a wide range of materials, offering a balance between cut quality and durability. How does the 14 TPI affect the cut compared with coarser blades? A 14 TPI configuration on the TECWERK blade provides finer, more controlled cuts than coarser pitches, helping to reduce edge chipping and improving finish on many workpieces. Is the 8.5 mm bore compatible with standard machine arbors? The 8.5 mm bore is intended for secure mounting on compatible arbors; the overall length aligns with common hole spacing to support stable installation and predictable runout. What advantages does the HSS bimetal construction bring? HSS bimetal construction in this TECWERK saw blade enhances longevity and resists tooth breakage under intermittent loads, delivering reliable service life in repetitive sawing operations. How does the 1.6 mm thickness influence performance? The 1.6 mm thickness reduces kerf width, which lowers material loss and cutting force, while maintaining sufficient stiffness for steady feed and consistent cut geometry with the staggered teeth design. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Precision cutting and long service life are achieved through the combination of HSS bimetal construction and vacuum hardening, while 10 TPI set teeth and a 8.5 mm mounting hole ensure reliable seating and efficient chip removal on Kasto machines. Order the machine saw blade L450 x B38 x S2 mm (HSS) directly via Metav Werkzeuge or ask our consultants if needed. Machine saw blade L450 x B38 x S2 mm (HSS) — D 8.5 mm, 10 TPI — TECWERK (Kasto version) Machine saw blade L450 x B38 x S2 mm (HSS) for industrial band saws, designed for robust, repeatable metal cutting in Kasto sawing systems HSS bimetal for extended blade life Vacuum-hardened for heat resistance 10 TPI set teeth for efficient metal cutting Kasto-compatible with 8.5 mm mounting hole High-performance cutting through hardened HSS bimetal The blade is made from HSS bimetal, a construction that combines a high-speed steel cutting edge with a resilient backing for improved toughness. The vacuum-hardening process increases heat resistance and wear life, meaning fewer blade changes and more continuous production time. With a 450 mm overall length, 38 mm width and 2 mm thickness the geometry supports stable tracking in industrial band saw frames while maintaining cutting precision and resistance to deformation. Secure mounting and machine compatibility for predictable operation Mounting is defined by the 8.5 mm bore and the pattern of offset tension holes, a configuration prepared specifically for Kasto machines. The dedicated hole arrangement ensures correct clamping and even tensioning across the blade, which reduces vibration and runout during cutting. Because of these Kasto-specific features, the blade is intended for use in compatible Kasto systems only, ensuring a predictable fit and safe operation in the intended machine environment. Tooth configuration tuned for metalworking efficiency The 10 TPI (teeth per inch) specification with set teeth provides a balance between rapid material removal and smooth chip evacuation. In practical terms, 10 TPI is well suited to a wide range of medium-thickness metal sections; coarser pitches would cut faster but produce rougher finishes, while finer pitches cut slower and are used for thin materials. The alternating set tooth profile reduces the risk of clogging and keeps the kerf slightly wider than the blade body, preventing pinching and improving blade life. Practical benefits for workshops and production lines For workshops seeking dependable consumables, this blade offers tangible operational advantages: reduced downtime due to longer life, consistent cut quality thanks to hardened edge geometry, and straightforward replacement when required. The specification and build quality make it suitable for industrial users who require durable, repeatable cutting performance in Kasto sawing equipment, supporting a steady production flow with minimal interruption. Contact Metav Werkzeuge for availability of the TECWERK Kasto-compatible machine saw blade (SKU 2000814502NW) and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000814502NW Product: Machine saw blade L450 x B38 x S2 mm HSS D 8.5 mm 10 TPI Kasto TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 Facts Overall length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth per inch: 10 TPI Special features Material: HSS bimetal Tooth type: set teeth Vacuum-hardened cutting edge Offset tension holes (Kasto machines) Only suitable for Kasto machines FAQ What materials can this blade cut? The machine saw blade L450 x B38 x S2 mm (HSS) from TECWERK is designed for cutting a broad range of materials commonly encountered in workshops; the HSS bimetal edge and vacuum hardening provide resistance when sawing various metals as indicated by the product specification. Can this blade be used in non-Kasto band saws? No. The blade includes offset tension holes and mounting geometry prepared specifically for Kasto machines; it is intended for Kasto-compatible frames and clamping systems only. How does 10 TPI affect cutting results? Ten teeth per inch offer a compromise between cutting speed and surface finish: the 10 TPI pitch is effective for medium-thickness metal sections, providing good removal rates while the set teeth keep the kerf clear for consistent cutting. What mounting details are important when fitting this blade? Ensure a correct fit to the saw’s drive and guide system; this blade features an 8.5 mm bore and Kasto-specific offset holes for secure clamping and even tension distribution. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from the combination of vacuum‑hardened HSS‑bimetal construction and a precise 6 TPI set tooth geometry for dependable cutting across a wide range of workshop materials; order the blade directly from Metav Werkzeuge or consult the team for application-specific advice and compatibility checks. TECWERK machine saw blade L450 × 36 × 2 mm, HSS‑bimetal, for Kasto machines The TECWERK machine saw blade is a vacuum‑hardened HSS‑bimetal band blade designed for industrial sawing applications on Kasto machines, providing robust performance and consistent cut quality. Vacuum-hardened HSS-bimetal construction 450 × 36 × 2 mm industrial dimensions 6 TPI set teeth for universal cutting 8.5 mm offset tension holes for Kasto High cutting performance with industrial steels and non‑ferrous materials The vacuum‑hardened HSS‑bimetal construction delivers a balance of hardness and flexibility that supports sustained cutting performance in mixed production environments. The designation 6 TPI (teeth per inch) indicates a medium tooth pitch that works efficiently across a wide spectrum of workpiece materials, from softer non‑ferrous metals to many grades of steel. This tooth geometry reduces chatter and improves feed stability, so operators benefit from predictable cycle times and fewer rejected parts. The technical choice of a bimetal strip welded to a flexible backing combines wear resistance with breakage tolerance, which is particularly advantageous in continuous or semi‑automated sawing operations. Durability and reliable kerf control for consistent productivity The blade’s set teeth arrangement creates a controlled kerf that prevents binding and aids chip evacuation during cutting, which reduces heat build‑up and prolongs edge life. The presence of 8.5 mm offset tension holes, specifically arranged for Kasto machines, ensures secure mounting and even tension distribution across the blade, lowering vibration and improving cut straightness. These design aspects limit unscheduled downtime and help maintain dimensional accuracy across batches, delivering direct benefits to production efficiency and component quality. Regular inspection of tooth condition and correct mounting tension will sustain these advantages over the blade’s service life. Practical size and fit for industrial workshops and service centres With overall dimensions of 450 × 36 × 2 mm and a packing unit of 1, this band blade suits routine replacement cycles in metalworking shops that operate Kasto saws. The blade’s compatibility note — intended only for Kasto machines — simplifies procurement and inventory planning for facilities standardised on that platform. For workshop managers and procurement specialists, the compact specification makes storage and handling straightforward, while the universal tooth pitch reduces the need for multiple blade types across varied cutting tasks. Specification‑driven purchasing ensures parts interchangeability and predictable performance in production lines. For procurement of the TECWERK machine saw blade or for tailored technical guidance, contact Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to request the SKU 2000814500NW and application recommendations. Technical data Article number: 2000814500NW Product type: Maschinensägeblatt Manufacturer: TECWERK Label: Maschinensägeblatt L450xB36xS2mm HSS Loch‑D.8,5mm ZpZ 6 Kasto Facts Overall length: 450 mm Width: 36 mm Thickness: 2 mm Bore / hole diameter: 8.5 mm Teeth per inch: 6 Special features Material: HSS‑bimetal Vacuum‑hardened machine saw blade Teeth: set (geschränkt) Offset tension holes, only for Kasto machines Packaging unit: 1 FAQ What materials can be cut with this blade? The TECWERK machine saw blade (SKU 2000814500NW) is a vacuum‑hardened HSS‑bimetal blade intended for cutting a broad range of materials; the 6 TPI tooth pitch supports versatile performance across non‑ferrous metals and many steels. Is the blade compatible with all bandsaw machines? No, the blade features offset tension holes specifically arranged for installation in Kasto machines and is supplied for use on that platform only. What does 6 TPI mean for cutting results? Six teeth per inch (6 TPI) denotes a medium tooth pitch that balances cutting speed and surface finish, making it suitable for general‑purpose sawing where both efficiency and acceptable edge quality are required. How should the blade be mounted and tensioned? Mounting requires alignment with the 8.5 mm tension holes and proper, even blade tension as specified by the Kasto machine manual; correct tensioning preserves tooth geometry and reduces vibration. When should the blade be replaced? Replacement should occur once tooth wear or chipping leads to degraded cut quality or increased cycle times; regular inspections following each production shift are recommended to detect wear early. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS bimetal construction and vacuum-hardened finish for sustained cutting performance across a wide range of materials; the precise 450 × 38 × 2 mm dimensions with an 8.5 mm bore ensure stable mounting in compatible machines. Order the blade via Metav Werkzeuge or consult our specialists for application advice. Machine saw blade L450×B38×S2 mm — HSS bimetal, 8.5 mm bore (TECWERK Kasto) The Machine saw blade L450×B38×S2 mm is a Kasto-compatible, vacuum-hardened HSS bimetal blade designed for robust, machine-mounted cutting across diverse workshop materials. HSS bimetal, vacuum-hardened for durability Set teeth for effective chip clearance 450 × 38 × 2 mm dimensions for stable cutting 8.5 mm bore, compatible with Kasto machines Built for long service life and reliable throughput The combination of HSS bimetal and a vacuum-hardened treatment provides a balance between flexibility and wear resistance, which translates into fewer blade changes and longer operating cycles. This means fewer interruptions on the production floor and improved overall equipment effectiveness. Bimetal construction pairs a high-speed steel cutting edge with a resilient backing strip to absorb stresses, so the blade sustains edge integrity under continuous use while maintaining a predictable wear pattern for scheduled maintenance. Geometry and tooth form that improve cutting quality With 6 TPI (teeth per inch) and set teeth, the blade offers a compromise between feed rate and finish: the relatively coarse tooth spacing supports fast material removal, while the tooth set improves chip evacuation and reduces friction. The 450 mm length, 38 mm width and 2 mm thickness deliver a stable cutting geometry that minimises vibration in machine-mounted applications, helping to preserve tolerances and surface quality even on thicker section workpieces. Explaining briefly, set teeth means individual teeth are alternately displaced left and right to create a kerf wider than the blade body, preventing pinching and overheating. Secure fit and intended machine compatibility This variant is supplied with an 8.5 mm bore and offset mounting holes configured for Kasto machines; the specific hole pattern ensures a secure, concentric fit and prevents slippage during operation. As the blade is manufactured to match Kasto mounting standards, mechanical clamping forces are transmitted evenly across the blade body, reducing the risk of run-out and improving cut consistency. If uncertain whether the mounting aligns with a particular machine model or if additional technical data is required for a specialised application, Metav Werkzeuge can supply clarifications and measured drawings to support selection and installation. For Kasto-compatible TECWERK saw blades and tailored advice on application, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss material, feed and machine pairing. Technical data Article number: 2000814140NW Type: Machine saw blade Manufacturer: TECWERK Facts Length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 8.5 mm Tooth spacing: 6 TPI Special features HSS bimetal Vacuum-hardened Set teeth (geschränkt) Offset mounting holes for Kasto machines Suitable for cutting a wide range of materials FAQ What materials can this saw blade cut effectively? The TECWERK machine saw blade (Machine saw blade L450×B38×S2 mm, SKU 2000814140NW) is designed for cutting a wide range of workshop materials thanks to its HSS bimetal edge and vacuum-hardening, enabling reliable performance across many common metals and non-ferrous materials. How does the 6 TPI specification affect cutting? A 6 TPI tooth spacing on the blade provides relatively coarse teeth for efficient material removal; the specification in this TECWERK machine saw blade supports faster feeds while the set teeth maintain chip clearance and reduce the risk of tooth clogging. Is this blade compatible with non-Kasto machines? This version is supplied with an 8.5 mm bore and offset holes configured specifically for Kasto machines; compatibility with other machines is not guaranteed and should be verified against the machine’s mounting pattern. What maintenance extends blade life? Keeping cutting speeds and feeds matched to the HSS bimetal design, ensuring correct tensioning where applicable, and regular inspection for wear will extend service life; the vacuum-hardened finish supports predictable wear and scheduled replacement. How should the blade be mounted to ensure concentricity? Use the designated 8.5 mm bore and the offset mounting pattern provided for Kasto systems to achieve even clamping pressure; correct mounting reduces run-out and helps maintain cut quality for the TECWERK machine saw blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS bimetal durability and precise 8 TPI tooth geometry for consistent performance across diverse materials; order the TECWERK machine saw blade directly via Metav Werkzeuge or contact our consultants for specification advice. Maschinensägeblatt L450×B32×S2 mm – HSS bimetal, 8 TPI, 10.5 mm bore (TECWERK) Maschinensägeblatt L450×B32×S2 mm – a vacuum‑hardened HSS bimetal machine saw blade for versatile workshop cutting HSS bimetal, vacuum‑hardened construction Suitable for cutting nearly all common materials 10.5 mm bore for standard arbour fittings 8 TPI for stable, universal cutting performance Faster, reliable cutting through HSS bimetal technology The vacuum‑hardened HSS bimetal composition offers a durable cutting edge that maintains sharpness under continuous use. This construction combines a high‑speed steel cutting edge with a flexible backing, reducing tooth breakage and extending service intervals. The result is a blade that delivers consistent chip evacuation and predictable cut quality, which benefits production planning by lowering downtime and tool change frequency. Precision fit and stable running for machine integration Designed with a 10.5 mm bore and a length corresponding to the hole spacing, this machine saw blade integrates easily with common machine arbour systems. The specified dimensions 450 × 32 × 2 mm ensure a secure mount and predictable radial run‑out, which supports accurate line following and minimises rework. The 8 TPI tooth pitch strikes a balance between material removal rate and surface finish, making the blade suitable for diverse workshop tasks without frequent blade swaps. Versatility across materials with set teeth for smoother cutting The teeth are set to provide clearance and reduce binding when cutting mixed materials. Thanks to the bimetal edge and the tooth geometry, the blade copes well with ferrous and non‑ferrous metals as well as general workshop materials, offering a single‑blade solution for varied cutting needs. This versatility helps to streamline inventory and simplifies job planning in small and medium workshops that require reliable, multipurpose tooling. Practical maintenance and operational benefits The blade’s construction reduces wear and the need for immediate reconditioning; when sharpening is required, the HSS edge supports conventional resharpening methods, restoring cutting performance without removing the blade from service for lengthy periods. The robust design and common 10.5 mm mounting make replacement straightforward, while the blade thickness of 2 mm provides a good compromise between stability and kerf width, conserving material and reducing cutting forces. For workshops seeking a dependable HSS bimetal blade, contact Metav Werkzeuge for ordering and specification support – supply is managed from Emmerich, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000814127NW SKU: 2000814127NW Product name: Maschinensägeblatt L450xB32xS2mm HSS Loch‑D.10,5mm ZpZ 8 TECWERK Manufacturer: TECWERK Facts Overall length: 450 mm Width: 32 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth per inch: 8 Special features Material: HSS‑bimetal Vacuum‑hardened cutting edge Tooth set (geschränkt) for clearance Length equals hole spacing (L = hole centre distance) Packaging unit: 1 FAQ What materials can be cut with the Maschinensägeblatt L450×B32×S2 mm? The Maschinensägeblatt L450×B32×S2 mm (TECWERK) is designed to cut a broad range of common workshop materials, including ferrous and non‑ferrous metals and general workshop substrates, thanks to its HSS bimetal edge and set teeth. How does the 8 TPI specification affect cutting results? An 8 TPI tooth pitch provides a compromise between cutting speed and surface finish; the TECWERK machine saw blade performs reliably for general‑purpose cutting where balanced material removal and finish are required. Is the 10.5 mm bore compatible with standard arbour fittings? Yes, the 10.5 mm bore matches many standard arbour configurations, enabling secure mounting and reduced radial run‑out for consistent cuts with the TECWERK blade, SKU 2000814127NW. Can the blade be resharpened or must it be replaced? The HSS bimetal edge supports conventional resharpening methods; reconditioning restores cutting geometry and extends the useful life of the blade in typical workshop practice. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS bi‑metal construction, vacuum‑hardened treatment and Kasto‑compatible clamping for reliable, long‑running sawing performance; order the blade directly via Metav Werkzeuge or consult the team for fit and delivery options. Machine saw blade L450 x B38 x S2 mm HSS, Ø 8.5 mm, 4 TPI – TECWERK The Machine saw blade L450xB38xS2mm HSS is a heavy‑duty band saw blade designed for high‑productivity cutting on Kasto band saw systems across a wide range of materials. HSS bi-metal construction for long life Vacuum-hardened blade for consistent hardness Set teeth, 4 TPI for stable cutting Offset Ø 8.5 mm clamping holes for Kasto Robust construction for sustained production The blade combines HSS bi‑metal weldment with a vacuum‑hardened tooth zone to provide extended service life and predictable wear behaviour. This metallurgical approach keeps the cutting edge harder while the backing strip remains tough, which reduces the likelihood of tooth breakage under intermittent shock loads. As a result, production runs benefit from fewer tool changes and reduced downtime, supporting higher overall equipment effectiveness in busy workshops and small production lines. Coarse pitch and set teeth for dependable cutting performance A 4 TPI (teeth per inch) coarse pitch with set teeth balances cutting speed and kerf stability, making the blade suitable for cutting structural sections, bars and a broad spectrum of workpiece materials. The coarser tooth spacing clears chips effectively, lowering the chance of clogging and overheating during long cuts. In practice, this means faster advance rates with maintained dimensional consistency and fewer rejects, delivering a clear cost‑per‑cut advantage for repetitive sawing tasks. Designed for seamless integration in Kasto band saws With overall dimensions of 450 mm length, 38 mm cutting width and 2 mm thickness, plus Ø 8.5 mm offset clamping holes, the blade is engineered specifically for use in Kasto machines. The offset mounting holes ensure secure clamping in compatible fixtures and simplify changeovers when using machine‑matched blade holders. Supplied as packaging unit 1, the blade is ready for immediate replacement in workshop spares kits, enabling a quick return to full sawing capacity without onsite modification. For robust, Kasto‑compatible cutting performance with TECWERK blades, contact Metav Werkzeuge for expert advice and prompt dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814138NW Label: Maschinensägeblatt L450xB38xS2mm HSS Loch‑D.8,5mm ZpZ 4 Kasto TECWERK Manufacturer: TECWERK Product type: Machine saw blade Execution: Kasto Dimensions / core data Total length: 450 mm Cutting width: 38 mm Thickness: 2 mm Bore diameter: 8.5 mm Packaging unit: 1 Special features Material: HSS bi‑metal Tooth configuration: set teeth, 4 TPI Heat treatment: vacuum‑hardened tooth zone Machine compatibility: for Kasto machines only FAQ What materials can this blade cut? The TECWERK machine saw blade (SKU 2000814138NW) is designed as a versatile cutting tool suitable for a wide range of common workshop and industrial materials, providing good chip evacuation and robust performance across many applications. Is this blade compatible with all band saws? No, the blade’s offset Ø 8.5 mm clamping holes and specific mounting geometry are intended for use in Kasto band saw systems; it is supplied expressly for Kasto machines. How does the 4 TPI tooth pitch affect cutting? A 4 TPI pitch offers a coarse cutting action that balances speed and kerf stability, enabling efficient cutting of larger sections while maintaining consistent chip removal and reduced risk of clogging. How often should the blade be replaced? Replacement intervals depend on workpiece material, cutting parameters and feed rate; the HSS bi‑metal construction and vacuum‑hardened teeth extend service life compared with standard carbon blades, lowering change frequency under typical workshop conditions. Can the blade be re‑sharpened? Re‑sharpening options depend on wear pattern and workshop capability; the welded HSS tooth strip is designed for durability, and many operations find scheduled replacement more economical than extensive resharpening. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction combined with a 450 mm length and 10.5 mm arbor hole for reliable, coarse cutting across a wide range of materials; order supply or consult Metav Werkzeuge for application guidance and fast delivery. TECWERK machine saw blade L450×B38×S2 mm — HSS bimetal, 10 TPI A TECWERK machine saw blade for industrial sawing tasks, offering vacuum-hardened HSS bimetal teeth with a 10.5 mm centre bore for secure mounting in standard machines. Vacuum-hardened HSS bimetal blade 450 mm overall length with 10.5 mm bore 38 mm width and 2 mm thickness for stability Set teeth, 10 TPI for coarse, fast cuts Greater cutting reliability for mixed materials The vacuum-hardened HSS bimetal construction provides a durable cutting edge that maintains performance under continuous use. Vacuum hardening increases wear resistance compared with untreated HSS, which translates into longer service intervals and fewer blade changes in busy production and workshop environments. The blade's set teeth arrangement prevents binding and clears swarf effectively, making it suitable for coarse cuts and rapid material removal across many workpiece types. Stable running and secure mounting in machines With an overall length of 450 mm, a width of 38 mm and a thickness of 2 mm, this blade offers the dimensional stability required for consistent cut quality. The 10.5 mm centre bore aligns with common arbor sizes, ensuring a firm, concentric fit that reduces vibration and improves finish. Specified tooth pitch of 10 TPI balances cutting speed and chip clearance, ideal for general-purpose sawing where throughput and predictable cut profiles are priorities. Low-maintenance performance for production workflows Designed as a practical choice for industrial cutters and workshop operators, the blade's HSS bimetal composition resists dulling and chipping better than plain high-speed steels. The result is reduced downtime and lower tooling consumption over time. The product is supplied singly (packaging unit: 1), enabling selective replacement and straightforward stock control. For operations requiring dependable daily performance, this blade offers a durable, easy-to-integrate option. Request a supply quote from Metav Werkzeuge for the TECWERK machine saw blade or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for application advice and fast fulfilment Technical data Article number: 2000814506NW Manufacturer: TECWERK Product type: Machine saw blade Material: HSS-bimetal SKU label: Maschinensägeblatt L450xB38xS2mm HSS Loch-D.10,5mm ZpZ 10 TECWERK Numbers / Core technical data Overall length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth per inch: 10 TPI Packaging unit: 1 Special features / Versions Vacuum-hardened HSS bimetal Set teeth (geschränkt) Suitable for coarse, fast cutting of various materials Length corresponds to hole spacing (Länge = Lochabstand) FAQ What materials can this blade cut effectively? The TECWERK machine saw blade with HSS bimetal construction is engineered for coarse cutting across a wide range of materials; its vacuum-hardened teeth maintain edge life during demanding use. Which machines is the blade compatible with? Compatibility depends on arbor and clamp dimensions; the blade's 10.5 mm bore and 450 mm length suit common industrial sawing machines that accept these standard dimensions. How does the 10 TPI tooth pitch affect cutting? A 10 TPI pitch offers faster, coarse cutting with good chip clearance, making the blade appropriate where speed and material removal rate are priorities rather than ultra-fine surface finish. Is the blade supplied individually or in sets? This item is supplied as a single blade (packaging unit: 1), allowing selective replacement and straightforward inventory control. Can the blade be resharpened? Resharpening options depend on workshop capability and cost-efficiency; the vacuum-hardened HSS bimetal construction extends usable life, which often reduces the need for frequent resharpening. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS bimetal construction, vacuum‑hardening and a secure 10.5 mm bore for dependable machine mounting; the result is a robust saw blade that balances longevity with versatile cutting performance. Order the TECWERK machine saw blade directly via Metav Werkzeuge or ask our consultants if needed. Machine saw blade L450 x 38 x 2 mm, HSS bimetal, Ø10.5 mm bore, 6 TPI – TECWERK The Machine saw blade L450 x 38 x 2 mm is a vacuum‑hardened HSS bimetal blade designed for machine use, offering set teeth for clean cuts across a broad range of workshop materials HSS bimetal for high durability Vacuum‑hardened for extended blade life Set teeth for consistently clean cutting 10.5 mm bore for secure machine mounting Consistent cutting performance for mixed workshop tasks The vacuum‑hardened HSS bimetal composition delivers a dependable balance between toughness and cutting edge retention. With a 450 mm length, 38 mm working width and 2 mm thickness, this blade is dimensioned for stable engagement on compatible machines. The 6 TPI (teeth per inch) arrangement and set teeth geometry reduce binding when cutting a variety of materials, producing smoother feeds and fewer reworks. The construction is especially beneficial where frequent starts and stops, or changes of material, demand a blade that resists chipping and keeps a predictable cutting rate. Secure mounting and precise tooth geometry for cleaner results A central 10.5 mm bore ensures accurate alignment and safe clamping in the saw machine, promoting concentric rotation and reducing vibration. The set teeth arrangement spaces cut kerf clearance from the blade body, which helps to avoid overheating and prevents material sticking—advantages that translate into improved surface finish and reduced secondary finishing. For operators less familiar with saw terminology: set teeth means alternate teeth are bent slightly outward to create a wider cutting channel than the blade body, allowing chips to escape and lowering friction during the cut. Robust build reduces downtime and maintenance effort The vacuum‑hardened process increases the hardness of the cutting edge without making the blade brittle, which supports longer service intervals and steadier performance under frequent use. The HSS bimetal material bonds a high‑performance cutting alloy to a flexible backing, offering impact resistance and the ability to withstand varied cutting conditions. Choosing a blade with these characteristics often leads to fewer blade changes and less production interruption, enhancing overall workshop efficiency and lowering indirect operating costs. For industrial workshops seeking a resilient TECWERK solution, contact Metav Werkzeuge for ordering or for detailed application advice and mounting compatibility from our Emmerich location Technical data Article number: 2000814144NW SKU: 2000814144NW Label: Maschinensägeblatt L450xB38xS2mm HSS Loch‑D.10,5mm ZpZ 6 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Packaging unit: 1 UID: 2000814144NW Facts Length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth: 6 TPI Special features Material: HSS bimetal Vacuum‑hardened blade Teeth: set (geschränkt) Designed for cutting a wide range of materials Length specified as hole distance (mounting‑related) FAQ What materials can this saw blade cut? The TECWERK machine saw blade is specified as suitable for cutting a wide range of materials thanks to its HSS bimetal construction and vacuum‑hardening, which support general workshop applications. How is the blade mounted in a machine? Mounting uses the 10.5 mm central bore; secure clamping on a compatible machine flange or arbor ensures concentric running and reduced vibration for consistent cutting. What does 6 TPI mean for cut quality? Six teeth per inch (6 TPI) indicate a coarser tooth pitch that favours faster material removal and good chip clearance, particularly useful on mixed materials where efficient feed and reduced clogging are required. Is the blade suitable for heavy‑duty continuous cutting? The vacuum‑hardened HSS bimetal build improves edge life and resistance to wear; for prolonged heavy‑duty production use, routine inspection and blade replacement intervals should be determined according to application demands. Which product code should be referenced when ordering? Please reference SKU 2000814144NW when enquiring or ordering the TECWERK machine saw blade to ensure the correct item is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the vacuum‑hardened HSS‑bimetal construction and 10 TPI for reliable, long service life and consistent cutting quality; the 450 mm length and 10.5 mm bore ensure compatibility with standard machine mounts. Order directly via Metav Werkzeuge or ask our consultants for application advice. Machine saw blade L450×B32×S2 mm HSS by TECWERK – 10 TPI, 10.5 mm bore A vacuum‑hardened machine saw blade L450×B32×S2 mm HSS designed for versatile workshop and industrial cutting of a wide range of materials Vacuum‑hardened HSS bimetal construction 450 mm length with 10.5 mm bore 32 mm width, 2 mm thickness 10 TPI, set teeth for clean cuts Consistent cutting performance and long lifetime The vacuum‑hardened HSS‑bimetal construction delivers a balance of toughness and wear resistance, extending blade life in demanding production conditions. Vacuum hardening refines the material's microstructure, which reduces edge breakage and maintains cutting geometry over longer runs; this translates into fewer blade changes and less downtime in the workshop. With a 10 TPI tooth pitch and set teeth, the blade is optimised for general-purpose sawing where both material removal rate and finish quality matter, giving reliable, repeatable results in everyday metalworking tasks. Broad material compatibility and practical tooth design A blade with set (geschränkt) teeth disperses the kerf width to prevent binding and to improve chip evacuation; this is especially helpful when sawing alloys, mild steel and mixed batches of material. The specification indicates suitability for sawing almost any material commonly encountered in mechanical workshops, so the tool is appropriate for cutting steel, non‑ferrous metals and many engineering plastics. The tooth pitch of 10 TPI favours medium‑fine cuts, offering a compromise between feed rate and surface quality; for users less familiar with tooth geometry, this means fewer burrs and a reduced need for secondary finishing. Fitment, handling and workshop advantages Length equals hole spacing, so the 450 mm overall length aligns with the hole pattern on many machine mounts, and the 10.5 mm bore ensures secure mounting in compatible saw arbors. The compact cross section — 32 mm width and 2 mm thickness — keeps the kerf narrow for efficient material use while remaining rigid enough for accurate straight cuts. Supplied as a single‑unit packaging, the blade is ready for immediate installation and machine compatibility checks. Choosing a blade from a recognised brand like TECWERK benefits from consistent manufacturing standards and quality control, which supports predictable performance on the shop floor. Contact Metav Werkzeuge for tailored advice on blade selection and machine compatibility — Metav Werkzeuge can confirm fitment details for TECWERK machine saw blades and arrange delivery from Emmerich; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 2000814129NW Product: Machine saw blade Brand: TECWERK Material: HSS‑bimetal Packaging unit: 1 Bore diameter: 10.5 mm Teeth per inch: 10 Tooth set: set (geschränkt) Core specifications Length: 450 mm Width: 32 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth per inch: 10 Special features Vacuum‑hardened HSS‑bimetal construction Set teeth for improved chip clearance Length equals hole spacing Suitable for cutting a wide range of materials FAQ What materials can this saw blade cut effectively? The TECWERK machine saw blade (SKU 2000814129NW) is designed for versatile cutting and is suitable for common metals as well as many engineering plastics and non‑ferrous materials. How does the 10 TPI tooth pitch affect cutting? A 10 TPI pitch offers a balance between cutting speed and finish quality; this tooth spacing on the TECWERK blade provides medium‑fine cuts with reduced burr formation. Is the 10.5 mm bore compatible with standard saw arbors? The 10.5 mm bore aligns with many industrial machine mounts; users should verify arbor diameter and hole spacing against the blade’s 450 mm length to ensure a correct fit. What maintenance is required to extend blade life? Routine inspection for wear and prompt replacement when teeth become rounded will preserve performance; using the vacuum‑hardened HSS‑bimetal blade as intended helps reduce premature damage. Does the blade require a specific feed rate or coolant? Feed rate and coolant depend on the material being cut; the set teeth and HSS‑bimetal construction allow flexible operation, but following machine manufacturer guidance is recommended. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the vacuum-hardened HSS bimetal construction and set teeth for fast, reliable cuts across mixed materials; the 450 mm length with a 10.5 mm bore ensures straightforward mounting in standard circular-saw machines. Order the machine saw blade directly via Metav Werkzeuge or ask our consultants if needed. Maschinensägeblatt L450xB32xS2mm HSS, 10.5 mm bore — TECWERK A robust machine saw blade designed for versatile workshop and industrial cutting tasks, combining HSS bimetal durability with a 4 TPI tooth pattern for efficient material removal HSS bimetal construction for durability Vacuum-hardened for improved wear resistance Set teeth, 4 TPI for mixed-material cutting 10.5 mm bore and 450 mm length for standard mounting Faster cutting with durable HSS bimetal that reduces downtime The vacuum-treated HSS bimetal design delivers a balance of hardness and toughness that is suitable for high-demand workshop use. Because the cutting edges are formed from high-speed steel and joined to a resilient backing, the blade resists premature wear while maintaining edge integrity; this results in longer service intervals and fewer blade changes. The coarse 4 TPI tooth count supports rapid material removal, so cycle times are reduced and throughput is increased. Performance is supported by clear, measurable specifications and proven metallurgy. Secure mounting and geometry that simplifies machine integration With an overall length of 450 mm and a 10.5 mm bore, the blade is compatible with machines that accept this mounting pitch; the length corresponds to the hole spacing used on the intended machines, so fitting is straightforward. The 32 mm width and 2 mm thickness provide the necessary stiffness for stable tracking during sawing, while the set teeth reduce binding when cutting varied materials. The result is consistent cut quality and fewer stoppages for rework, which supports predictable production planning and improved output quality. Suitable applications and straightforward maintenance for workshop use The blade is intended for general-purpose sawing across a wide range of materials where a coarse tooth pitch and robust edge geometry are advantageous. It is supplied as a single unit for immediate installation and is recommended where efficient bulk removal and long life are priorities. Basic maintenance—regular cleaning of the tooth gullet and inspection for wear—is usually sufficient to retain cutting performance. If additional technical details are required, Metav Werkzeuge can provide further guidance and compatibility advice to match machine specifications. Choose the TECWERK vacuum-hardened HSS bimetal blade for reliable, high-throughput sawing — order via Metav Werkzeuge or contact their consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations Technical data Article number: 2000814125NW Item label: Maschinensägeblatt L450xB32xS2mm HSS Loch-D.10,5mm ZpZ 4 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Facts Overall length: 450 mm Width: 32 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth: 4 TPI Special features Material: HSS bimetal Vacuum-hardened blade Tooth form: set teeth Length equals hole spacing Packaging unit: 1 FAQ What materials can this blade cut effectively? The TECWERK machine saw blade with HSS bimetal construction is designed for cutting a broad range of materials; its coarse 4 TPI and robust edge geometry favour rapid removal in mixed-material applications. Is the 10.5 mm bore compatible with standard machines? Yes, the blade’s 10.5 mm bore and 450 mm overall length correspond to common mounting pitches, allowing the blade to be fitted to machines that accept that shaft and spacing. How does the set tooth configuration affect cutting performance? Set teeth on this blade provide clearance that reduces pinching and heat build-up, which improves feed stability and cutting continuity when processing varied materials. What maintenance is recommended to maximise blade life? Routine inspection and cleaning of the tooth gullets, plus checking for wear or damage, will help preserve the blade’s performance; the vacuum-hardened HSS edge supports longer intervals between resharpening. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from a vacuum‑hardened HSS‑bimetal construction and a coarse 4 TPI set tooth geometry for durable, fast cutting with minimal downtime; order directly via Metav Werkzeuge or consult the specialists for compatibility and supply. Machine saw blade L450 x B38 x S2 mm, HSS‑bimetal, Ø 10.5 mm bore — 4 TPI (TECWERK) The machine saw blade L450 x B38 x S2 mm is a vacuum‑hardened HSS‑bimetal blade designed for production saws and workshop machines, offering robust wear resistance and reliable performance for demanding cutting tasks. HSS‑bimetal for extended blade life Vacuum‑hardened for high wear resistance Set teeth for smooth, snag‑free cutting 10.5 mm bore and 450 mm length Long‑lasting cutting performance through high‑speed steel technology The combination of HSS‑bimetal construction and vacuum hardening delivers a blade with superior toughness and edge retention compared with standard carbon steels. The bimetal design bonds a high‑performance cutting edge to a supportive backing, which reduces the risk of premature fracture while maintaining flexibility — a clear advantage in continuous production environments. The result is consistent cutting performance and fewer interruptions for blade changes, contributing directly to higher process uptime and reduced operating costs. Coarse pitch and set teeth for efficient, clean removal of material With a coarse pitch of 4 TPI and set teeth (geschränkt), the geometry prioritises rapid chip evacuation and reduced heat build‑up during cutting. Coarse teeth are particularly effective where fast material removal is required and where the kerf must remain free of clogging. The set teeth create a controlled kerf width that prevents pinching and lowers friction at the cutting edge, which in turn reduces tool wear and the need for frequent regrinding. These characteristics translate into reliable cycle times and cleaner cuts, making the blade suitable for demanding workshop and light industrial applications. Precise dimensions for straightforward installation and compatibility Key dimensions — 450 x 38 x 2 mm with a 10.5 mm bore — match common mounting and feed configurations in many machine saws; the specified length corresponds to the hole spacing, ensuring direct replacement without modification. The 2 mm thickness balances rigidity with a manageable kerf, while the 38 mm width delivers lateral stability in the cut. These measurable specifications simplify planning for maintenance cycles and spare‑part management and support predictable blade behaviour across production batches. Professional supply and quality assurance from an experienced partner Metav’s marketplace approach brings industrial quality within reach: a curated selection of precision blades supplied with clear technical data and dependable logistics from Emmerich. The focus on transparency and consistent availability supports workshop planning and reduces procurement complexity. Combine the blade’s engineering advantages with a supplier that emphasises reliable order fulfilment and specialist advice to maintain smooth operations and predictable output quality. Contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply of TECWERK machine saw blades; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000814142NW Label: Maschinensägeblatt L450xB38xS2mm HSS Loch‑D.10,5mm ZpZ 4 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Core technical data Length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth: 4 per inch (4 TPI) Packaging unit: 1 Special features Material: HSS‑bimetal Vacuum‑hardened blade Set teeth (geschränkt) Length equals hole spacing FAQ What materials can this blade cut effectively? The machine saw blade L450 x B38 x S2 mm (TECWERK, SKU 2000814142NW) is vacuum‑hardened and manufactured from HSS‑bimetal, designed to cut a broad range of materials with improved edge life and wear resistance. What does 4 TPI and set teeth mean for cutting behaviour? A 4 TPI pitch denotes a coarse tooth spacing that favours fast material removal; the set teeth create a kerf that prevents pinching and improves chip evacuation, which together yield faster, cleaner cuts with less heat build‑up. How is the blade mounted and what does the 10.5 mm bore indicate? The 10.5 mm bore is the mounting hole diameter for securing the blade in compatible machine fixtures; the overall length and bore spacing are designed to match standard machine saw hubs where the length equals the hole spacing. How should the blade be stored and maintained for maximum service life? Store the blade dry and protected from impact; inspect for visible damage before use, ensure correct mounting and tension where applicable, and replace if cracks or excessive wear are present to maintain cutting quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS bimetal construction, vacuum‑hardened teeth and a precise Ø10.5 mm bore, this saw blade delivers durable, versatile cutting for a wide range of workshop applications. Order the TECWERK machine saw blade directly via Metav Werkzeuge or consult the specialists for compatibility advice. Machine saw blade L450×B38×S2 mm HSS, Ø10.5 mm, 8 TPI – TECWERK The Machine saw blade L450×B38×S2 mm HSS, Ø10.5 mm, 8 TPI – TECWERK is a vacuum‑hardened, HSS bimetal blade engineered for reliable, high‑performance sawing across diverse workshop materials. HSS bimetal for prolonged tool life Vacuum‑hardened tooth zone Set teeth, 8 TPI for versatile cutting Ø10.5 mm bore for standard machine mounts Consistent performance for mixed workshop materials Built from HSS bimetal, the blade offers an excellent balance of toughness and wear resistance, resulting in a longer service life compared with simple high‑speed steel blades. The vacuum‑hardened tooth zone increases edge stability and reduces premature wear, which means fewer blade changes and more uninterrupted machining time. This translates into reliable throughput and lower process interruption in daily production. Cutting geometry that suits many applications The set teeth geometry with 8 TPI (teeth per inch) provides a compromise between material removal rate and surface finish, making the blade suitable for a broad spectrum of materials. Set teeth reduce binding and help eject chips effectively when cutting mixed or unknown materials, improving feed stability. For workshop teams seeking one blade to cover varied jobs, the tooth configuration delivers predictable cuts and reduced rework. Clear dimensions and straightforward machine fitment With an overall length of 450 mm, a width of 38 mm and a thickness of 2 mm, the blade is dimensioned for standard machine saw installations where the blade length corresponds to the hole spacing. The Ø10.5 mm central bore ensures compatibility with common machine mounts and provides positive centring for accurate cutting lines. These measurable specifications simplify tool selection and reduce set‑up time on the shop floor. Durability, maintenance and supply confidence The combination of HSS bimetal material and vacuum hardening reduces downtime through extended edge life and consistent cut quality. Routine maintenance is straightforward: inspect the tooth set and replace the blade when cutting quality or feed stability declines. Sourcing through Metav Werkzeuge brings an additional quality filter — a European distribution hub that combines inventory depth with decades of precision‑tool expertise, ensuring predictable supply and technical advice when required. Contact Metav Werkzeuge for detailed compatibility checks and to request expert advice on the TECWERK machine saw blade — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814501NW Manufacturer: TECWERK Product type: Machine saw blade Numbers / Core technical data Length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth per inch: 8 Packaging unit: 1 Designs / Special features Material: HSS bimetal Vacuum‑hardened tooth zone Teeth configuration: set teeth Length equals hole spacing (for mounting) Suitable for cutting a wide range of workshop materials FAQ What materials can this blade cut effectively? The TECWERK machine saw blade (SKU 2000814501NW) is made of HSS bimetal with a vacuum‑hardened tooth zone, designed for cutting a broad range of workshop materials; suitability depends on the specific material hardness and feed parameters. How does the 8 TPI tooth count affect cutting? An 8 TPI configuration balances material removal and finish, giving reliable performance on varied materials while limiting chip clogging and promoting stable feeds. Will the blade fit standard machine mounts? The blade’s Ø10.5 mm bore and overall 450 mm length mean it fits many common machine mounts where the blade length corresponds to the hole spacing; confirm exact mounting dimensions before installation. What maintenance is recommended to extend blade life? Regular inspection of tooth condition and correct feed settings will preserve cutting performance; replace the blade when edge deterioration affects cut quality—this applies to the TECWERK saw blade as specified. Is this blade suitable for high‑speed cutting operations? The HSS bimetal construction and vacuum hardening improve wear resistance under demanding conditions, but actual speed and feed should be selected according to machine capacity and the workpiece material. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal construction and the precise 450 x 38 x 2 mm dimensions for dependable, long-running sawing performance; the blade’s 8 TPI tooth pitch ensures efficient material removal while the offset clamping holes guarantee secure fitment in compatible Kasto machines. Order the machine saw blade directly via Metav Werkzeuge or ask our consultants for technical guidance. TECWERK machine saw blade L450 x B38 x S2 mm — HSS, bore Ø8.5 mm, 8 TPI A heavy-duty machine saw blade designed for industrial cutting tasks, optimised for Kasto sawing systems and built to combine durability with consistent cutting performance Vacuum-hardened HSS bimetal blade Dimensions 450 x 38 x 2 mm 8 teeth per inch (8 TPI) for rapid material removal Offset clamping holes for Kasto machine compatibility Robust cutting performance for demanding production The HSS bimetal design pairs a high-speed steel tooth edge with a flexible backing, delivering a blend of toughness and fracture resistance that reduces breakage during heavy-duty operation. Vacuum hardening increases surface hardness and wear resistance, which means longer intervals between blade changes and less unscheduled downtime. This construction is particularly valuable in production environments where consistent throughput and predictable tool life translate directly into lower operating costs and smoother workflow. Optimised geometry for efficient material removal A coarse 8 TPI tooth pitch provides rapid chip clearance and efficient cutting rates across a wide range of workpieces. The blade’s 450 x 38 x 2 mm profile offers a stable cutting line while maintaining compatibility with band sawing setups used in many workshops and small production lines. The set (geschränkt) tooth form improves cutting action by preventing blade binding; this results in faster feed rates and reliable cut quality when processing general engineering materials. Secure fitment and machine-specific compatibility The blade features offset clamping holes (Ø 8.5 mm) specifically arranged for Kasto sawing machines. This tailored fit ensures correct alignment and secure retention during operation, reducing vibration and improving cut consistency. Note that the hole pattern and clamping arrangement make this version intended exclusively for Kasto systems; compatibility checks are advised to confirm proper mounting in any particular machine model. Practical benefits for workshop operations Choosing a vacuum-hardened HSS bimetal blade reduces the frequency of replacements and conserves operator time otherwise spent on blade swaps and adjustments. The construction supports stable cutting speeds and consistent tolerances, which is beneficial for repeat production runs and mixed-material batches. Where reliability and uptime are priorities, this blade delivers a balance of durability and cutting efficiency suited to both repair shops and light-to-medium industrial use. For availability, machine compatibility checks or to arrange a technical consultation for Kasto systems, contact Metav Werkzeuge — expert advice and supply from Emmerich is available by email or phone. Technical data Article number: 2000814131NW Label: Maschinensägeblatt L450xB38xS2mm HSS Loch-D.8,5mm ZpZ 8 Kasto TECWERK Manufacturer: TECWERK Product type: Machine saw blade Execution: Kasto Core specifications Overall length: 450 mm Width: 38 mm Thickness: 2 mm Bore diameter: 8.5 mm Teeth per inch: 8 Packaging unit: 1 Materials & special features HSS bimetal construction Vacuum-hardened for wear resistance Teeth set (geschränkt) Offset clamping holes for Kasto machines only Suitable for sawing a broad range of materials FAQ Is this blade compatible with non-Kasto band saws? The TECWERK machine saw blade is supplied with offset clamping holes configured specifically for Kasto machines; non-Kasto systems may not accept this hole pattern without modification. What does HSS bimetal mean for service life? HSS bimetal construction in the TECWERK blade combines a high-speed steel cutting edge with a flexible backing, offering enhanced wear resistance and reduced fracture risk compared with simple high-speed steel blades. Which materials can this blade cut effectively? This vacuum-hardened HSS bimetal blade is designed to handle a wide range of engineering materials; selection of feed and speed should be matched to the workpiece for optimal tool life and finish. How does the 8 TPI tooth pitch affect cutting? An 8 TPI configuration favours rapid material removal and efficient chip clearance, making it suitable for general-purpose sawing where throughput is prioritised over ultra-fine finish. What should be checked before fitting the blade to a machine? Confirm the bore diameter (8.5 mm), blade thickness (2 mm), width (38 mm) and the offset clamping hole pattern match the machine’s requirements; ensure compatibility with the Kasto clamping system where applicable. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a durable, vacuum‑hardened HSS bimetal design combined with a compact 450 x 32 x 2 mm profile for reliable machine mounting and long service life. Order the blade directly via Metav Werkzeuge or contact the sales team for application advice and rapid supply. TECWERK machine saw blade L450 x W32 x T2 mm — HSS bimetal, Hole Ø 10.5 mm, 6 TPI A TECWERK machine saw blade engineered for versatile, high‑duty cutting in industrial workshop machines; suitable where a compact, vacuum‑hardened blade with set teeth and standard mounting hole is required HSS bimetal construction Vacuum‑hardened for durability Set teeth, 6 TPI Hole Ø 10.5 mm for machine mounting Robust HSS bimetal construction for extended life The vacuum‑hardened HSS bimetal composition delivers a high wear resistance that prolongs service intervals and reduces tool change frequency. The bimetal design joins a high‑speed steel cutting edge to a resilient backing strip, combining hardness at the cutting zone with flexural strength in the body. This structural pairing supports sustained cutting performance in mixed workloads and contributes to consistently sharp edges over many cycles. Precise dimensions and mount compatibility for machine use With an overall format of 450 x 32 x 2 mm and a central mounting hole Ø 10.5 mm, the blade is dimensioned for standard machine fixtures where the length matches the hole spacing. The set teeth profile and 6 TPI (teeth per inch) specification balance cutting speed and edge life, making the blade suitable for medium‑coarse cuts. The compact thickness and width ensure stability during feed, reducing vibration and improving cut straightness in repetitive production runs. Versatile cutting performance across common workshop materials Designed as a general‑purpose machining blade, the tool is intended for sawing a wide range of materials under practical shop conditions. The combination of HSS bimetal and a set‑tooth geometry offers good chip evacuation and reliable tooth durability, which is especially beneficial when alternating between ferrous and non‑ferrous workpieces. For users seeking a single blade to cover varied tasks, the product represents a pragmatic compromise between productivity and longevity. Practical mounting, handling and maintenance benefits The blade’s hole Ø 10.5 mm and defined overall length simplify integration into machine spindles and clamps; note that the stated overall length corresponds to the machine’s hole spacing. The compact cross‑section (32 mm width, 2 mm thickness) supports accurate alignment and reduced strain on drive components. Routine inspection of tooth condition and correct clamping torque will maintain cutting quality; the blade is supplied as a single unit for straightforward replacement and stock control. For vacuum‑hardened cutting reliability from TECWERK and swift fulfilment, contact Metav Werkzeuge for tailored application advice and prompt delivery — eMail info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 2000814498NW Label: Maschinensägeblatt L450xB32xS2mm HSS Loch‑D.10,5mm ZpZ 6 TECWERK Manufacturer: TECWERK Product type: Maschinensägeblatt Material: HSS‑Bimetal Overall length: 450 mm Width: 32 mm Thickness: 2 mm Hole diameter: 10.5 mm Teeth: set (alternating) Teeth per inch: 6 Packaging unit: 1 UID: 2000814498NW Facts Length: 450 mm Width: 32 mm Thickness: 2 mm Hole Ø: 10.5 mm Teeth per inch: 6 Special features Vacuum‑hardened HSS bimetal blade Set teeth for improved chip clearance Length corresponds to hole spacing Universal application emphasis in product notes FAQ What materials can this blade cut? The product specifications indicate a vacuum‑hardened HSS bimetal blade intended for sawing a broad range of materials; the TECWERK machine saw blade is therefore suitable for diverse workshop tasks where a universal cutting tool is required. How is the blade mounted in a machine? Mounting uses the central hole Ø 10.5 mm; the overall length of 450 mm corresponds to the machine’s hole spacing, allowing direct installation in compatible fixtures. What does 6 TPI mean for cutting performance? A 6 TPI tooth count provides a medium‑coarse cut, offering a compromise between fast material removal and reasonable finish, appropriate for general workshop operations. Is the blade interchangeable with other machine saw blades? Interchangeability depends on the machine’s hole diameter and length spacing; the TECWERK blade with hole Ø 10.5 mm and 450 mm overall length is compatible where those mounting dimensions match. How many blades are supplied per package? The item is supplied as a single unit, packaging unit 1, which facilitates individual replacement and inventory planning. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS bimetal construction, vacuum hardening and precise 450×36×2 mm dimensions for consistent long-term cutting performance; order the TECWERK machine saw blade directly via Metav Werkzeuge or ask our consultants if needed Machine saw blade L450×36×2 mm, HSS bimetal, hole Ø8.5 mm — TECWERK (for Kasto machines) Machine saw blade L450×36×2 mm, HSS bimetal designed for heavy-duty band sawing on Kasto systems, providing robust life and reliable fit for industrial metal-cutting applications HSS bimetal, vacuum-hardened for durability 450×36×2 mm dimensions for stable cutting 4 TPI tooth pitch with set teeth Mounting hole Ø8.5 mm for Kasto machines Longer service life from high-performance metal and heat treatment The HSS bimetal construction combines a high-speed steel cutting edge welded to a flexible backing, which permits both toughness and edge hardness for extended service life. The additional vacuum hardening optimises the microstructure of the cutting edge, reducing wear and increasing resistance to chipping when sawing demanding workpieces. For operations where blade longevity reduces downtime, this configuration offers clear operational advantages and predictable maintenance intervals. Stable tracking and precise installation on compatible saw frames The 450×36×2 mm format provides a stiff, dimensionally stable profile that supports consistent tracking and vibration control, contributing directly to cut quality. The blade features a mounting hole Ø8.5 mm, matching the locating fixtures used on compatible Kasto machines; this secures alignment and eases blade exchange. The looped design and cross-sectional stability reduce lateral flexing, which helps maintain cut tolerances on long runs and repetitive batch work. Coarse pitch and set teeth for efficient material removal A 4 TPI (teeth per inch) configuration with set teeth creates an open kerf that clears chips effectively, making the blade suitable for a wide range of materials and mixed-production environments. The set tooth pattern prevents the blade from binding in the cut and improves heat dissipation at the cutting edge, which benefits throughput rates on thicker or composite workpieces. This geometry is particularly useful where a balance between cutting speed and edge life is required. Practical workshop advantages: uptime, replacement and compatibility On the workshop floor the primary benefits translate into reduced blade changes, predictable consumable planning and fewer quality rejects. The construction and treatment of this blade support extended run times, and its compatibility note — designed specifically for Kasto machines — ensures correct fitment without modification. Spare-part logistics and routine inspections are simplified, contributing to a smoother production flow and lower total cost of ownership over time. For precise compatibility checks or to request the TECWERK HSS bimetal blade for Kasto machines, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814499NW Label: Maschinensägeblatt L450xB36xS2mm HSS Loch-D.8,5mm ZpZ 4 Kasto TECWERK Manufacturer: TECWERK Product type: Machine saw blade Facts Length: 450 mm Width: 36 mm Thickness: 2 mm Mounting hole diameter: 8.5 mm Teeth per inch: 4 Special features Material: HSS bimetal Heat treatment: vacuum-hardened cutting edge Tooth form: set teeth (geschränkt) Compatibility: for Kasto machines only Packaging unit: 1 FAQ What materials can this blade cut effectively? The TECWERK machine saw blade, made from HSS bimetal and vacuum-hardened, is engineered to cut a broad range of metals and mixed workshop materials; the 4 TPI pitch with set teeth supports efficient chip removal across varied workpieces. Is this blade compatible with non-Kasto band sawing machines? This saw blade is manufactured with mounting features and hole positions specifically for Kasto machines; use on other makes may require verification of hole alignment and fit. How does vacuum hardening affect blade performance? Vacuum hardening refines the cutting edge of the HSS bimetal, improving wear resistance and reducing the risk of edge chipping; in practice, this means longer runtimes and more consistent cut quality for the blade. What is the benefit of the 4 TPI tooth pitch? A 4 TPI pitch creates a coarser tooth spacing that clears chips more readily, which is advantageous for thicker sections and mixed materials where a balance between speed and life is needed. How should the blade be maintained to achieve optimum life? Routine checks for tension, correct tracking on the saw frame and prompt replacement when wear markers show help preserve the blade’s performance; correct installation to the Ø8.5 mm mounting datum is essential. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS bimetal construction, vacuum-hardening and a standard 10.5 mm bore for reliable, long-lasting sawing performance; order the blade via Metav Werkzeuge or consult our specialists for machine compatibility and application advice. Machine saw blade L500 x W38 x T2 mm, HSS bimetal, 10.5 mm bore — TECWERK A machine saw blade designed for robust workshop and light industrial sawing across a wide range of materials, featuring vacuum-hardening and set teeth for consistent cut quality HSS bimetal for extended blade life Vacuum-hardened cutting edge for durability 10 TPI with set teeth for clean cuts 38 mm width and 2 mm robust thickness Durable, low-maintenance cutting thanks to HSS bimetal and vacuum hardening The blade is constructed from HSS bimetal, a combination that balances toughness with wear resistance to reduce breakage and prolong service intervals. The vacuum-hardened treatment increases surface hardness while maintaining core flexibility, so the blade resists premature wear and chipping under continuous use. This results in fewer blade changes and reduced production interruptions, supporting efficient workshop workflows and lower lifetime operating costs. Consistent, versatile cutting performance for varied materials With a 10 TPI tooth pitch and set teeth, the geometry promotes efficient chip evacuation and a smoother finish on both ferrous and non-ferrous workpieces. The tooth configuration is optimised for general-purpose sawing, delivering clean cuts across a wide material spectrum. The combination of tooth pitch and the blade’s profile ensures reliable feed behaviour and predictable cutting results when processing sections that require controlled kerf and good surface quality. Precise fit and stable operation for machine integration The blade’s 500 mm length and a 10.5 mm bore match common saw arbors and hole spacing, making installation straightforward on compatible machines. A 38 mm width paired with a 2 mm thickness gives lateral stability during feed, reducing vibration and promoting straighter cuts over longer runs. The design supports consistent performance with routine maintenance and correct blade setup, helping workshops maintain throughput without frequent adjustments. For tailored advice on integrating this TECWERK machine saw blade into production, contact Metav Werkzeuge in Emmerich or email info@metav-werkzeuge.com to discuss machine compatibility and application specifics Technical data Article number: 2000814135NW Label: Maschinensägeblatt L500xB38xS2mm HSS Loch-D.10,5mm ZpZ 10 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Material: HSS bimetal Overall length: 500 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth per inch: 10 Tooth type: set Packaging unit: 1 Notes: vacuum-hardened; length equals hole spacing Facts Overall length: 500 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth per inch: 10 Packaging unit: 1 Special features HSS bimetal construction Vacuum-hardened cutting edge Set teeth for improved chip evacuation Designed for general-purpose material cutting Length corresponds to hole spacing FAQ What materials can this machine saw blade cut? The TECWERK machine saw blade is designed for general-purpose cutting and, thanks to its HSS bimetal construction and vacuum-hardening, can be used on a wide range of materials encountered in workshop environments. What does 10 TPI mean for cut quality? A 10 TPI tooth pitch on this blade balances material removal and finish: it supports steady feed rates while producing a relatively smooth cut surface, making it suitable for mixed workloads. Does the 10.5 mm bore fit common machine arbors? Yes; the blade’s 10.5 mm bore aligns with typical arbor sizes used in many sawing machines, simplifying installation when the machine’s hole spacing matches the 500 mm length specification. How does vacuum-hardening benefit blade life? Vacuum-hardening increases the surface hardness of the blade while preserving core toughness, so the TECWERK blade maintains cutting performance longer and is less prone to edge degradation under regular use. Is this blade suitable for heavy industrial continuous cutting? The blade is intended for robust workshop and light industrial applications; suitability for continuous heavy industrial shifts depends on machine setup and specific material demands—Metav Werkzeuge can advise on fit and expected service life. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a vacuum-hardened HSS bimetal design and a compact 500 x 50 x 2.5 mm profile for reliable, long-running cuts in workshop and light industrial environments; the 10.5 mm arbor bore and 6 TPI set teeth ensure stable mounting and consistent chip evacuation. Order the blade directly via Metav Werkzeuge or consult the team for advice on integration and delivery. TECWERK machine saw blade L500 x B50 x S2.5 mm, HSS bimetal, 6 TPI A TECWERK machine saw blade crafted for general-purpose and industrial cutting applications, vacuum-hardened for wear resistance and designed to fit standard 10.5 mm arbors Vacuum-hardened HSS bimetal blade Dimensions 500 x 50 x 2.5 mm 10.5 mm arbor hole for secure mounting 6 teeth per inch with set tooth form Durable HSS bimetal construction for extended service life The blade’s HSS bimetal composition combines a tough backing steel with a high-speed steel cutting edge, delivering enhanced resistance to impact and heat. This construction reduces the frequency of blade changes and downtime, which supports steady production flow. The vacuum-hardened treatment increases edge retention and durability, so fewer interruptions for replacement are expected compared with standard carbon-steel blades. Stable cutting and chip clearance for consistent performance With a 6 TPI tooth pitch and set teeth (alternate set), the blade clears chips efficiently and reduces friction during cutting. The tooth geometry is aimed at balancing an acceptable surface finish with reliable material removal, making the blade suitable for mixed tasks in a workshop setting. The 10.5 mm arbor bore provides a firm fit in compatible machines, lowering runout and improving cut precision. Compact dimensions tailored to standard machine requirements The overall length, width and thickness — 500 x 50 x 2.5 mm — make this blade compatible with many machine saw frames and feed systems while offering a robust cross-section that resists deflection. A thicker body contributes to straighter cuts under load, and the 50 mm width supports longer service life by distributing wear across a larger cutting surface. These dimensional choices reduce vibration and help maintain predictable results. Versatility across common workshop materials Designed as a general-purpose machine blade, the construction and tooth form enable cutting of a broad range of materials commonly encountered in workshops and light industry. The combination of HSS bimetal and vacuum hardening provides sufficient abrasion resistance for ferrous and non-ferrous jobs, while the set teeth help prevent clogging when working with mixed or composite materials. This versatility makes the blade a pragmatic choice where a reliable all-rounder is preferred. Contact Metav Werkzeuge to discuss how the TECWERK machine saw blade can be integrated into your equipment; stock is held in Emmerich for dependable supply and swift dispatch. Technical data Article number: 2000814508NW Description: Maschinensägeblatt L500xB50xS2,5mm HSS Loch-D.10,5mm ZpZ 6 TECWERK Manufacturer: TECWERK Material: HSS-Bimetall Packaging unit: 1 Facts Length: 500 mm Width: 50 mm Thickness: 2.5 mm Bore diameter: 10.5 mm Teeth per inch: 6 Special features Vacuum-hardened HSS bimetal Teeth set (geschränkt) for improved chip clearance Suited for cutting a wide range of materials Length corresponds to hole spacing for standard mounts FAQ What machine types are compatible with this saw blade? The TECWERK machine saw blade is designed for standard machine saws that accept a 10.5 mm arbor bore and a 500 mm blade length; compatibility depends on machine guards and mounting arrangements. Can the blade cut both ferrous and non-ferrous materials? Yes. The HSS bimetal construction and vacuum hardening make the blade suitable for a broad spectrum of workshop materials, including many ferrous and non-ferrous substrates. How does the 6 TPI affect cutting results? A 6 TPI tooth pitch provides a compromise between cut speed and finish, offering stable material removal and reduced clogging for a variety of applications. Is the blade resharpenable or disposable? HSS bimetal blades can often be resharpened, but service life and the feasibility of regrinding depend on wear and the extent of damage to the cutting edge. What is the benefit of vacuum hardening on this blade? Vacuum hardening improves hardness and edge retention without compromising the steel backing, resulting in longer life and improved resistance to heat-related wear. What does “set teeth” mean for everyday use? Set teeth (geschränkt) alternate to create a kerf wider than the blade body, reducing friction, preventing binding and improving chip evacuation during through-cuts. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the proven combination of HSS bimetal construction and vacuum-hardening for extended blade life, together with a precise 10.5 mm mounting hole for secure installation; order the blade directly via Metav Werkzeuge or request guidance from our consultants. TECWERK machine saw blade L500 x W38 x T2mm, HSS, Hole Ø10.5mm, 6 TPI A TECWERK machine saw blade L500 x W38 x T2mm designed for reliable, high-performance cutting across a wide range of workshop and light industrial applications. HSS bimetal construction for long life Vacuum-hardened for increased durability Set teeth, 6 TPI for versatile cutting 10.5 mm mounting hole for secure fitting Consistent productivity with robust construction The blade’s HSS bimetal composition delivers a durable cutting edge that balances toughness and wear resistance, reducing downtime caused by frequent replacements. The vacuum-hardening process incorporated in production increases edge stability, which translates into longer blade life and more predictable service intervals. This combination supports continuous operation in busy workshops and small-scale production lines, improving throughput without compromising cut quality. Secure fitting and straightforward installation With a dedicated 10.5 mm mounting hole and standard strip dimensions of 500 x 38 x 2 mm, the saw blade ensures precise alignment in compatible machine fixtures. The defined hole diameter simplifies mounting and guarantees axial stability during operation, reducing vibration and the risk of inaccurate cuts. Easy installation minimises machine downtime and streamlines blade changes in routine maintenance cycles. Versatile cut performance across common materials Equipped with set teeth arranged at 6 TPI, the blade is optimised for general-purpose sawing where a balance of cutting speed and surface finish is required. The tooth geometry and bimetal edge allow effective work on a wide variety of materials, from non-ferrous metals to general steel sections. This versatility makes the cutting strip a practical choice for workshops that handle mixed material jobs and need a dependable all-round solution. Lower maintenance, predictable results The combination of HSS bimetal technology and vacuum hardening reduces the frequency of reconditioning and replacement, contributing to lower maintenance effort and total operating interruptions. The stable tooth set helps maintain a consistent kerf and reliable chip evacuation, which keeps downstream processes predictable. For operations where repeatability matters, this solution supports process reliability and reduces rework. For reliable supply and technical advice on the TECWERK machine saw blade, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or telephone +49 2822 7131930 to arrange purchase or consultancy tailored to workshop requirements. Technical data Article number: 2000814133NW Product type: Machine saw blade Manufacturer: TECWERK Core specifications Overall length: 500 mm Width: 38 mm Thickness: 2 mm Hole diameter: 10.5 mm Teeth: 6 TPI Features & materials Material: HSS bimetal Tooth form: set teeth (geschränkt) Vacuum-hardened for broad material compatibility Packaging unit: 1 FAQ What materials can be cut with this saw blade? The TECWERK machine saw blade L500 x W38 x T2mm is designed for broad applicability; its HSS bimetal edge and vacuum-hardening allow cutting of common steels and many non-ferrous materials in workshop settings. How is the blade mounted to machines? Mounting uses the 10.5 mm central hole; the 500 x 38 x 2 mm strip dimensions correspond to standard fixtures for compatible sawing equipment and ensure stable fitting during operation. What does 6 TPI mean for cutting performance? Six teeth per inch (6 TPI) provides a compromise between cutting speed and surface finish, making the blade suitable for general-purpose sawing tasks where both throughput and reasonable finish are required. Is the tooth set adjustable or preset? The teeth are supplied with a preset set (geschränkt) to ensure effective chip clearance and stable cutting geometry; re-setting is possible during professional maintenance if required. Which maintenance practices extend blade life? Regular cleaning of the blade, correct mounting with the 10.5 mm hole, and avoiding excessive feed rates all preserve the HSS bimetal edge and prolong service life of this saw blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the vacuum‑hardened HSS bimetal and robust staggered teeth for versatile, long‑lasting sawing performance; order the blade directly via Metav Werkzeuge or consult the team for machine compatibility. TECWERK machine saw blade L500 x B38 x S2 mm – HSS bimetal, 10.5 mm bore, 4 TPI The TECWERK machine saw blade is a vacuum‑hardened HSS bimetal blade for industrial sawing machines, designed to cut a wide range of materials with coarse, staggered teeth. HSS bimetal, vacuum hardened 500 mm length equals hole spacing 10.5 mm bore for machine mounting Staggered teeth, 4 TPI Consistent cutting for diverse workshop tasks The vacuum‑hardened HSS bimetal construction combines a wear‑resistant cutting edge with a tough backing layer to deliver precise cuts across mixed materials. With a 500 mm overall length and 38 mm usable width, the blade matches standard machine fittings while maintaining a low blade profile of 2 mm. The coarse 4 TPI tooth pitch yields efficient chip removal on thicker sections, and the staggered teeth reduce vibration for smoother operation. This technical set‑up translates into reliable cycle times and predictable finishing quality in everyday production. Built for uptime and economical use The combination of vacuum hardening and bimetal design supports long tool life and reduces frequency of blade changes, lowering process interruptions and maintenance overhead. Because the blade resists edge chipping and maintains form under load, workshop throughput benefits from fewer reworks and steadier quality. The blade’s construction thus represents a clear rational advantage for industrial environments where efficiency, repeatability and resource use are priorities. Simple mounting and functional design A central 10.5 mm bore aligns the blade for secure attachment to common sawing spindles; the overall length corresponds to standard hole spacing, simplifying installation. The staggered tooth set assists chip evacuation and prevents clogging when cutting mixed or fibrous materials. For less experienced technicians, coarse tooth counts like 4 TPI mean faster feed rates and reduced risk of heat build‑up when processing thicker stock, while still producing acceptable surface finish for follow‑up operations. Practical handling and service notes Supplied as a single unit, the blade is ready for immediate installation; regular inspection of tooth condition and correct mounting are the primary measures to preserve cutting quality. When tooth wear or bending appears, replacement preserves machine accuracy and safety. For workshops expanding capacity, the blade’s universal characteristics make it a practical choice for multi‑purpose sawing tasks within industrial and trade settings, combining robustness with straightforward handling. Metav’s consultancy can advise on optimal blade selection for specific materials and machine types. For tailored advice or to request an order through Metav Werkzeuge for the TECWERK machine saw blade L500 x B38 x S2 mm (SKU 2000814507NW), please contact Metav Werkzeuge for machine compatibility and delivery options via info@metav-werkzeuge.com or by phone Technical data Article number: 2000814507NW Product name: Maschinensägeblatt L500xB38xS2mm HSS Loch‑D.10,5mm ZpZ 4 TECWERK Manufacturer: TECWERK Product type: Machine saw blade Material: HSS‑bimetal Packaging unit: 1 Facts Length: 500 mm Width: 38 mm Thickness: 2 mm Bore diameter: 10.5 mm Teeth: 4 TPI Special features Vacuum‑hardened HSS bimetal Staggered tooth set Length corresponds to hole spacing Coarse pitch for efficient chip removal FAQ What materials can this blade cut effectively? The TECWERK machine saw blade is designed as a versatile HSS bimetal blade capable of cutting a wide range of materials; its vacuum‑hardened edge improves wear resistance when processing mixed workshop stocks. How is the blade mounted on a machine? Mounting requires alignment of the blade’s central 10.5 mm bore with the machine spindle; the 500 mm length corresponds to standard hole spacing for many industrial sawing systems. Why is a 4 TPI tooth pitch chosen for this blade? A 4 TPI pitch provides coarse cutting action, which speeds material removal on thicker sections and reduces clogging risk when paired with the staggered tooth set. How should the blade be maintained to maximise life? Regular inspection for tooth wear, correct mounting, and avoiding excessive feed rates preserve the blade’s performance; the vacuum‑hardened HSS composition helps extend service life under normal working conditions. Is this blade suitable for high‑volume production? The blade’s robust HSS bimetal construction and staggered teeth support steady operation in production contexts; consistent replacement intervals based on wear monitoring are recommended to maintain output quality and safety. Manufacturer / Responsible: NORDWEST Handel AG; Robert‑Schuman‑Straße 17; 44263 Dortmund

Take advantage of a vacuum-hardened HSS-bimetal construction combined with a 50 mm blade width and 2.5 mm thickness for stable, repeatable cuts; order the blade directly via Metav Werkzeuge or request application advice from Metav's consultants. TECWERK machine bandsaw blade L500 × 50 × 2.5 mm, HSS, Ø10.5 mm, 4 TPI A TECWERK machine bandsaw blade L500 × 50 × 2.5 mm designed for robust, industrial cutting where durability and consistent tooth geometry matter most. Vacuum-hardened HSS-bimetal construction 500 mm length × 50 mm width 2.5 mm thickness for high rigidity 10.5 mm centre hole, 4 TPI set teeth Reliable material and edge technology for predictable results The blade is made from HSS-bimetal, a pairing of high-speed steel cutting edges welded to a flexible backing, and is vacuum-hardened to increase edge life and resistance to heat-induced wear. This combination yields a balance between toughness and hardness: the cutting edges remain sharp under load while the backing resists fatigue. The set teeth (geschränkt) provide controlled chip clearance, reducing binding in mixed-material cuts. Such construction is particularly relevant in production environments where consistent cycle times and low scrap rates form part of efficiency targets. Dimensions and tooth geometry that support industrial workflows With a nominal length of 500 mm, a blade width of 50 mm and a blade thickness of 2.5 mm, the geometry offers lateral stability and reduced vibration during cutting. The 10.5 mm centre hole simplifies mounting to compatible saw arbors and aligns blade seating precisely. The tooth count of 4 TPI (teeth per inch) indicates a coarser pitch suitable for medium to thick section cutting and rapid material removal; fewer teeth per inch improves metal evacuation and reduces heat build-up when sawing dense materials. These measured specifications help planners select the correct blade to match material thickness and feed strategy for predictable throughput. Practical benefits: uptime, maintenance and compatibility A stiffer 2.5 mm web limits deflection under feed forces, which contributes to cleaner kerfs and less rework. The 50 mm width supports straight tracking, especially on longer cuts, and reduces the need for frequent realignment. Because the blade is manufactured for general industrial use, it is compatible with a wide range of workshop and production bandsaw setups that accept a 500 mm length and 10.5 mm arbor. Maintenance focuses on keeping the blade free from built-up material and inspecting teeth for wear; the HSS-bimetal construction extends service intervals compared with plain carbon blades, supporting higher machine availability and lower lifetime labour per cut. For confident, long-lasting cutting performance, order the TECWERK HSS-bimetal machine bandsaw blade through Metav Werkzeuge or contact Metav's specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application guidance Technical data Article number: 2000814146NW Label: Maschinensägeblatt L500xB50xS2,5mm HSS Loch-D.10,5mm ZpZ 4 TECWERK Manufacturer: TECWERK Product type: Machine bandsaw blade Facts Length: 500 mm Width: 50 mm Thickness: 2.5 mm Centre hole diameter: 10.5 mm Teeth: 4 TPI Packaging unit: 1 Special features Material: HSS-bimetal Heat treatment: vacuum-hardened Tooth set: geschränkt (set teeth) Coarse pitch for efficient chip removal Suited for general industrial cutting tasks FAQ What materials can this blade cut effectively? The TECWERK machine bandsaw blade is produced as an all-round HSS-bimetal solution and, thanks to its vacuum-hardened teeth and set geometry, is suitable for cutting a broad range of materials in industrial contexts, particularly where a coarse pitch and robust edge retention are required. How does the 4 TPI tooth count affect cutting performance? A 4 TPI configuration on this bandsaw blade delivers faster material removal and effective chip evacuation for thicker sections; the coarser pitch reduces clogging and heat, which is advantageous for ferrous and mixed-material cutting applications. Is the 10.5 mm hole compatible with standard arbors? The 10.5 mm centre hole is specified for accurate mounting on compatible saws; confirmation of arbor compatibility with the machine is recommended before installation to ensure safe and precise operation. What maintenance is required to maximise blade life? Regular cleaning to remove resin and built-up swarf, routine checks for tooth damage, and correct tensioning and alignment on the saw will extend the working life of the HSS-bimetal blade and maintain cutting quality. Can this blade be used on handheld saws or only on stationary machines? This product is designed as a machine bandsaw blade for stationary industrial or workshop bandsaw systems that accept the specified length, width and arbor diameter; it is not intended for handheld saw applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund