High-wear HSS M42 bimetal construction and a variable tooth pitch 14–18 TPI deliver consistent cutting performance across a range of steels and non-ferrous metals. The 13 mm width and 0.51 mm thickness balance stability with fine contour access, supporting profile and tube sawing in small to medium wall thicknesses. Order the blade directly via Metav Werkzeuge or consult the sales team for application-specific guidance and supply options. TECWERK metal bandsaw blade 835 x 13 x 0.51 mm HSS M42, 14–18 TPI A TECWERK metal bandsaw blade 835 x 13 x 0.51 mm designed for precision profile and pipe cutting across varied steel grades and non-ferrous materials HSS M42 bimetal construction Variable tooth pitch 14–18 TPI 13 mm width for tight contours Suited to profile and tube cutting Reliable cuts across mixed materials The TECWERK metal bandsaw blade 835 x 13 x 0.51 mm combines HSS M42 bimetal edge technology with a robust backing strip to provide high wear-resistant performance and extended life in production environments. The high-speed steel alloy at the tooth edge retains hardness at elevated cutting temperatures, reducing the frequency of blade changes and supporting continuous operation. This translates into measurable process stability for workshops that process both full sections and welded assemblies. Tooth geometry tuned for vibration-prone sawing A variable tooth pitch implemented as 14–18 TPI evens out cutting forces and reduces the tendency to chatter when sawing thin-walled profiles or tubes. The mixed pitch spacing helps prevent harmonic resonance in the workpiece and saw frame, improving cut quality without sacrificing feed rates. Where a neutral chip formation is required, the recommended 0° rake setting provides balanced chip evacuation for demanding stainless and tool steels while maintaining efficient throughput on milder materials. Versatile application with reduced downtime Designed for universal use, the blade suits tool steels, stainless steels and non-ferrous metals as well as standard structural grades. The combination of a narrow 13 mm kerf and a 0.51 mm section gives good access to tight radii while maintaining lateral stiffness for straight cuts. Operators benefit from fewer setup changes: the blade performs reliably on small- to medium-wall sections and is especially useful for workshop jobs that require a single blade to handle a variety of materials without frequent replacements. Practical fit, handling and packaging guidance With a width of 13 mm and thickness of 0.51 mm, the blade matches standard light- to medium-duty bandsaw machines where a narrow blade is preferred for profile work. The packaging unit: 5 supports stock management for busy shops and reduces administrative overhead for routine orders. For optimal results, align the blade with manufacturer-recommended tension settings and ensure clear coolant flow for materials that demand thermal control; sharpness retention of the bimetal teeth preserves performance between re-grinds and reduces process interruptions. Contact Metav Werkzeuge for tailored advice on blade selection and reliable supply of TECWERK HSS M42 bimetal bandsaw blades Technical data SKU: 2000814020NW Product type: metal bandsaw blade Manufacturer: TECWERK Material: HSS M42 bimetal Tooth configuration: variable tooth pitch Facts Width: 13 mm Thickness: 0.51 mm Overall length: 835 mm Tooth pitch: 14–18 TPI Packaging unit: 5 Special features Particularly wear-resistant bimetal blade in HSS M42 quality Variable tooth pitch for mixed materials and vibration-prone cuts Recommended pitch options for different tasks included in technical notes Suitable for profile and tube cuts of small to medium wall thickness FAQ Which materials can this blade cut effectively? The TECWERK metal bandsaw blade 835 x 13 x 0.51 mm is suitable for tool steels, stainless steels and non-ferrous metals, as well as standard structural steels. When should the 14–18 TPI range be selected? The 14–18 TPI setting is recommended for vibration-prone sawing and for cutting profiles and tubes with small to medium wall thickness where a finer finish and reduced chatter are required. How does the HSS M42 bimetal construction help in daily use? HSS M42 provides a hard, heat-resistant tooth edge combined with a tough backing strip, extending blade life and lowering downtime from frequent replacements. Is this blade suitable for very thick section cutting? The blade is optimised for small to medium wall thicknesses and profile work; very thick cross-sections may require a wider blade and different tooth geometry. How many blades are supplied per package? The product is supplied in a packaging unit: 5, facilitating workshop stock management. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS M42 bimetal construction, variable tooth pitch, and precise 835 x 13 x 0.51 mm dimensions to ensure efficient, clean sawing across a wide range of materials; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. Metal bandsaw blade 835 x 13 x 0.51 mm, HSS M42, variable pitch 10–14 TPI – TECWERK A metal bandsaw blade designed for reliable cutting of construction steels, tool and stainless steels, as well as non‑ferrous metals and profiles in workshop and industrial environments. HSS M42 bimetal for high wear resistance Variable tooth pitch 10–14 TPI for mixed cuts 835 x 13 x 0.51 mm for profile and tube work Long‑lasting cutting performance for busy workshops The blade’s HSS M42 bimetal construction combines a hard high‑speed steel cutting edge fused to a flexible backing, resulting in marked wear resistance and prolonged lifetime under continuous use. This metallurgical pairing reduces the risk of premature tooth failure, so production runs remain consistent and downtime is minimised. For operations where repeatability matters, the material choice translates into fewer blade changes and steadier output. Flexible tooth geometry that handles mixed materials Thanks to the variable tooth pitch, the blade copes with sections of differing thickness and material quality without clogging or chatter. The 10–14 TPI range is ideal for a mix of thin‑walled profiles and general purpose cuts: coarser pitches clear swarf quickly, while finer pitches produce smoother finishes. The specification also notes recommended pitch and rake setups — zero degree (0° rake) for vibration‑prone tasks and positive rake options for higher cutting aggression — allowing selection of the optimal configuration for either finish or speed. Cleaner cuts on profiles and tubes with controlled vibration Designed for vibration‑prone sawing, the blade’s tooth set and backing stiffness help maintain tracking and reduce flutter during profile and tube operations of small to medium wall thickness. Reduced vibration not only improves surface quality but also lowers the load on the saw and feeding systems, which can extend component life and reduce maintenance intervals. For fabricators working with construction or stainless steels, this means fewer rejects and a more predictable workflow. Practical dimensions and balanced kerf for efficient use At 835 x 13 x 0.51 mm, this bandsaw blade provides a balance between stiffness and kerf width, suitable for many standard 13 mm guide saw frames and common workshop setups. The medium thickness contributes to straight cutting with manageable power draw, while the blade’s general design supports work on tool steel, construction steel and a variety of non‑ferrous materials. Where higher material removal rates are required, selecting the appropriate tooth pitch and rake from the recommended options ensures a targeted performance increase without compromising blade life. For tailored advice and procurement of the TECWERK metal bandsaw blade, contact Metav Werkzeuge for expert guidance and local supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000814019NW Product: Metal bandsaw blade Manufacturer: TECWERK Label: Metallsägeband 835x13x0,51mm HSS M42 ZpZ 10-14 TECWERK Facts Width: 13 mm Thickness: 0.51 mm Overall length: 835 mm Teeth per inch: 10–14 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth pitch: variable pitch (variable Zahnteilung) Recommended pitches and rake: 5/8, 6/10, 8/12, 10/14, 14/18 with 0° rake for vibration‑prone cutting Alternative pitches: 3/4 and 4/6 with positive rake for high cutting performance Suited for: construction steels, tool steel, stainless steel, non‑ferrous metals, solid material and profiles Ideal uses: profile and tube cutting of small to medium wall thickness, vibration‑prone sawing operations FAQ What materials can this bandsaw blade cut? The TECWERK metal bandsaw blade is suitable for construction steel, tool steel, stainless steel and a range of non‑ferrous metals, as well as solid material and profiles. Which tooth pitch should be chosen for vibration‑prone cuts? For vibration‑prone sawing, select pitches such as 5/8, 6/10, 8/12, 10/14 or 14/18 with a 0° rake as recommended for the TECWERK blade. Is the blade appropriate for tube and profile cutting? Yes, the blade’s design and variable pitch make it particularly well suited to profile and tube cuts of smaller and medium wall thickness. How does the HSS M42 bimetal construction benefit production? HSS M42 bimetal provides a hard cutting edge with a flexible backing, delivering improved wear resistance and longer service life for continuous workshop use. What does 10–14 TPI mean for cutting performance? A 10–14 TPI range balances chip clearance and finish: coarser pitches near 10 TPI remove material faster, while finer pitches towards 14 TPI yield smoother surfaces — the variable pitch ensures adaptability across mixed workpieces. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund