Take advantage of a wear-resistant HSS M42 bimetal construction combined with a variable tooth pitch to handle a wide range of cutting tasks with improved blade life and reliable results; order the required TECWERK bandsaw blades directly via Metav Werkzeuge or consult the sales team for application advice. Metallsägeband 2750 x 27 x 0.90 mm HSS M42, variable 10–14 TPI — TECWERK Metallsägeband 2750 x 27 x 0.90 mm HSS M42, variable 10–14 TPI — TECWERK is a professional bandsaw blade engineered for demanding metal-cutting tasks in workshops and industrial environments HSS M42 bimetal for high wear resistance Variable tooth pitch 10–14 TPI for versatility 0.90 mm thickness for stable cutting performance Suited to profiles, tubes and vibration-prone cuts Durable bimetal design for consistent cutting life The HSS M42 bimetal construction provides a hard, wear-resistant cutting edge bonded to a tougher, flexible backing, so the blade resists premature tooth wear while maintaining fatigue resistance. This combination is particularly beneficial where longevity matters: fewer blade changes lead to reduced downtime and lower consumable costs. The term bimetal denotes a cutting geometry designed to keep the hardness at the teeth while preserving overall flexibility of the band. Variable tooth pitch boosts adaptability across materials A variable tooth pitch (10–14 TPI) enables stable chip evacuation and quieter cutting across differing material types. Specific pitch groups are recommended for particular tasks: the 5/8, 6/10, 8/12, 10/14 and 14/18 ranges with a 0° rake angle offer improved performance on vibration-prone sawing and on thin- to medium-walled profiles and tubes; finer pitches with a positive rake are suited to high-removal applications in structural, tool and high-speed steels and non-ferrous metals. This adaptability translates to fewer blade substitutions and a single blade type covering multiple jobs. Dimensions and geometry for precise profile and tube cutting With a length of 2750 mm, width of 27 mm and thickness of 0.90 mm, this bandsaw blade is optimised for small to medium cross-sections and applications where lateral stability matters. The 27 mm width provides guidance in the cut, while the 0.90 mm gauge balances stiffness and flexibility; as a result, the blade is well suited to accurate profile and pipe cutting where straightness and repeatability are required. The 10–14 TPI range helps maintain surface quality on mixed batches and reduces the risk of snagging on irregular sections. Practical workshop benefits and selection guidance Choosing a long-life HSS M42 bandsaw blade reduces maintenance cycles and improves throughput in busy shops. The variable tooth layout minimises vibration and noise, which benefits both machine longevity and shop-floor ergonomics. For selection: pick finer pitches for thin-walled tubes and delicate finishes, coarser groupings for bulk removal in thicker sections; the blade’s design makes it especially suitable where different steels and non-ferrous materials are processed in the same shift. For further technical clarification, Metav Werkzeuge can advise on pitch selection and cutting parameters for specific applications. Contact Metav Werkzeuge in Emmerich to discuss suitability for specific materials and secure TECWERK HSS M42 bandsaw blades for your workshop — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 2000813971NW Product type: Metallsägeband Brand: TECWERK Material: HSS M42 Bimetal Overall length: 2750 mm Width: 27 mm Thickness: 0.90 mm Tooth pitch: variable 10–14 TPI Packaging unit: 5 Facts Length: 2750 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 10–14 TPI Packaging unit: 5 Special features Particularly wear-resistant bimetal in HSS M42 quality Variable tooth pitch for different workpiece qualities Recommended pitches and rake angles for specific materials and cutting tasks Suitable for vibration-prone sawing, profile and tube cutting, small to medium wall thicknesses Applicable for construction, tool and stainless steels; also for non-ferrous metals and solid stock where specified FAQ Which materials are best cut with this TECWERK HSS M42 bandsaw blade? The TECWERK HSS M42 bandsaw blade (SKU 2000813971NW) is designed for a wide range of metals, including construction steels, tool steels and stainless steels, as well as many non‑ferrous materials when the appropriate tooth pitch is selected. How does the variable tooth pitch affect cutting performance? Variable tooth pitch reduces vibration and improves chip evacuation; in practice, it delivers smoother cuts across mixed batches and reduces the likelihood of blade chatter in vibration‑prone operations. What applications are recommended for the 0.90 mm thickness and 27 mm width? The 0.90 mm thickness with a 27 mm width is well suited to profile and tube cutting of small to medium wall thicknesses, offering a compromise between stiffness for straight cuts and flexibility for manoeuvring around contours. Which tooth pitch should be chosen for thin-walled tubes and delicate finishes? Finer pitch groupings within the variable range are recommended for thin-walled tubes and delicate surface finishes; consult the recommended pitch groups for best results and to extend blade life. Is this blade appropriate for high‑removal cutting of thicker sections? Yes; when configured with the coarser recommended pitch and a positive rake angle, the blade performs well for higher stock removal in thicker profiles and solid material. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS M42 bimetal durability, variable tooth pitch and precise 2750 x 27 x 0.9 mm dimensions for consistent, vibration‑resistant metal cutting; order the blade via Metav Werkzeuge or contact the technical advisors for tailored pitch recommendations. TECWERK Metal Band Saw Blade 2750 x 27 x 0.9 mm — HSS M42 bimetal, variable 5–8 TPI The TECWERK metal band saw blade 2750 x 27 x 0.9 mm is a versatile cutting tool designed for profile, tube and general metal sawing tasks across construction, tool and stainless steels. HSS M42 bimetal construction Variable tooth pitch 5–8 TPI for mixed cuts Suitable for stainless, tool steel and non‑ferrous Optimised for vibration‑prone profile and tube cuts Robust construction for longer cutting life and consistent results Constructed from HSS M42 bimetal, the blade offers elevated wear resistance and edge retention compared with standard high‑speed steels. The bimetallic bond combines a hard cutting edge with a tough backing material, which reduces tooth breakage and extends service intervals. This translates into fewer blade changes, reduced downtime and improved process economy in series or workshop applications. The material choice is particularly relevant where repeatability and tool life influence machining schedules and total operating costs. Variable tooth pitch and rake options for adaptable cutting performance The variable tooth pitch configuration (notably 5–8 TPI) reduces vibration and chatter when sawing mixed cross‑sections, small profiles and thin‑walled tubes. A 0° rake angle is recommended for many of the variable pitch settings to stabilise cuts in vibration‑sensitive applications, while positive rake options (e.g. 3/4 and 4/6) deliver higher material removal rates for thicker sections or aggressive cutting of non‑ferrous and tool steels. Variable pitch also evens out cutting forces, improving surface finish and extending blade life when workpieces vary in geometry or material grade. Precise dimensions and application scope for accurate workshop integration With a length of 2750 mm, a width of 27 mm and a thickness of 0.9 mm, this band saw blade fits machines that accept these standard dimensions and is suitable for cutting tasks ranging from thin profiles to medium wall tubes. The blade performs well on stainless, tool and construction steels, as well as on non‑ferrous metals and solid sections when the appropriate tooth pitch and rake are selected. For workshop planners, the blade’s geometry provides a reliable balance between rigidity and kerf width, enabling efficient sawing without excessive material loss or compromised cut quality. Contact Metav Werkzeuge for specific cutting recommendations and to secure TECWERK HSS M42 band saw blades — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 2000814003NW Brand: TECWERK Product type: Metal band saw blade Packaging unit: 5 Facts Length: 2750 mm Width: 27 mm Thickness: 0.9 mm Teeth per inch: 5–8 TPI Special features Material: HSS M42 bimetal Variable tooth pitch Suitable for profile, tube and general metal cutting Recommended pitches and rake: 5/8, 6/10, 8/12, 10/14, 14/18 at 0°; 3/4, 4/6 with positive rake FAQ What materials can be cut with this band saw blade? The TECWERK metal band saw blade in HSS M42 quality is suitable for stainless steels, tool steels, construction steels and many non‑ferrous metals when the correct tooth pitch is selected. How does the variable tooth pitch help in practical use? Variable tooth pitch on this blade evens out cutting forces and reduces vibration and noise, which improves surface finish and tool life when sawing mixed profiles or thin‑walled tubes. Which tooth pitch should be chosen for vibration‑prone profile cuts? For vibration‑sensitive profile and tube cuts the recommended ranges such as 5/8, 6/10 or 8/12 with a 0° rake provide stable performance; the exact choice depends on wall thickness and material. Can the blade be used for heavy section cutting? For thicker profiles and full material sections, consider pitches like 3/4 or 4/6 with a positive rake to increase material removal rates; the TECWERK HSS M42 construction supports such demands. Is this blade suitable for workshop band saws with 27 mm width capacity? Yes, the blade’s 27 mm width and 2750 mm length make it compatible with band saw machines designed for those standard dimensions; ensure machine guides and tensioning suit the blade’s thickness. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS M42 bi-metal construction and a variable tooth pitch (6–10 TPI) for dependable cutting across a wide range of materials; order directly via Metav Werkzeuge or contact the consultants for tailored advice on tooth selection and applications. TECWERK bi-metal band saw blade 2750 x 27 x 0.90 mm (HSS M42) – 6–10 TPI The TECWERK bi-metal band saw blade designed for versatile workshop and industrial use, suited to cutting profiles, tubes and a variety of steels with wear-resistant HSS M42 edge geometry. HSS M42 bimetal for high wear resistance Variable tooth pitch 6–10 TPI for versatile cutting 2750 x 27 x 0.90 mm for small-to-medium profiles Suited to vibration-prone profile and tube cuts Consistent cutting performance across mixed materials The HSS M42 bimetal edge provides a high-alloy cutting zone welded to a flexible backing, combining wear resistance with bend strength for longer service life. The variable tooth pitch reduces harmonic vibration and improves chip evacuation when sawing heterogeneous batches, which results in a more constant feed rate and fewer rejected parts. Recommended toothings include finer pitches with neutral (0°) rake for vibration-prone tasks and coarser or positive-rake teeth for aggressive material removal, ensuring the blade adapts to changing job requirements. Lower downtime through durable geometry and tailored tooth options Built to withstand demanding production cycles, the blade’s HSS cutting face offers extended lifetime relative to standard carbon alloys. The combination of a hardened cutting edge and resilient backing reduces the frequency of blade changes and machine stoppages, delivering a measurable improvement in throughput. Where higher material removal rates are required, select toothings with positive rake to increase cutting efficiency without compromising edge life, particularly in tool steel and stainless steel applications. Versatility for profiles, tubes and varied steels With dimensions of 2750 x 27 x 0.90 mm and a 6–10 TPI configuration, the blade suits a broad range of workshop tasks from small-section profiling to medium-wall tubing. The product performs well on stainless and construction steels, non-ferrous metals and solid stock when the tooth pitch is matched to the section and material hardness. For thinner-walled tubes and delicate profiles the finer tooth combinations listed in the technical notes reduce deformation and produce cleaner cuts, while coarser pitches enable reliable cutting of thicker sections and bulkier workpieces. Practical application guidance and selection logic Variable tooth pitch combs through the workpiece with staggered tooth spacing that prevents synchronous vibration and reduces chatter on irregular or welded materials. When encountering a mix of materials or unknown composition in batch work, prioritise the neutral 0° rake options for stability; switch to positive-rake toothings to regain speed on homogenous, harder stock. The blade’s bimetal construction simplifies maintenance routines: resharpening intervals are extended and handling during changeover is straightforward, contributing to predictable production planning. Contact Metav Werkzeuge for detailed tooth-pitch recommendations and compatibility checks — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — Metav’s consultants supply tailored advice and delivery from Emmerich to your workshop Technical data SKU: 2000813970NW Brand: TECWERK Product type: Bi-metal band saw blade Dimensions: 2750 x 27 x 0.90 mm Tooth pitch: 6–10 TPI Material: HSS M42 bimetal Tooth form: Variable tooth pitch Packaging unit: 5 Core data Length: 2750 mm Width: 27 mm Thickness: 0.90 mm Tooth pitch range: 6–10 teeth per inch Packaging quantity: 5 pieces Special features Particularly wear-resistant bimetal construction Variable tooth pitch for vibration reduction Recommended toothings: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake) for vibration-prone cuts Recommended toothings: 3/4, 4/6 with positive rake for high material removal Suitable applications: profiles, tubes, construction and tool steels, stainless steels, non-ferrous metals, solid stock and thicker profiles FAQ What materials can this blade cut effectively? The TECWERK bi-metal band saw blade (SKU 2000813970NW) cuts construction and tool steels, stainless steels and non-ferrous metals effectively when the correct tooth pitch is selected. Which tooth pitch should be chosen for vibration-prone profile cuts? For vibration-prone profile and tube cuts the 0° rake toothings such as 5/8, 6/10 or 8/12 are recommended for the TECWERK blade to reduce chatter and improve surface finish. Is the blade suitable for thicker solid stock? Yes, the bi-metal construction and choice of coarser toothings on this TECWERK blade permit cutting of thicker solid profiles while maintaining acceptable tool life. How does the variable tooth pitch benefit production runs? Variable tooth pitch on the TECWERK band saw blade prevents harmonic vibration, improves chip clearance and delivers steadier cutting in mixed-material batches. What are the delivery units and handling implications? The blade is supplied in packaging units of 5; the HSS M42 bimetal edge extends service intervals and simplifies scheduled blade changes for routine workshop maintenance. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS M42 bimetal durability, variable tooth pitch for versatile cutting and the precise 2825 x 27 x 0.90 mm format for consistent workshop results; order directly via Metav Werkzeuge or consult their specialists for application-specific advice. Metal band saw blade 2825 x 27 x 0.90 mm, HSS M42, variable tooth pitch 4–6 – TECWERK The metal band saw blade 2825 x 27 x 0.90 mm is designed for robust sawing tasks in mixed materials, delivering a balance of endurance and cutting performance for profiles, tubes and solid sections HSS M42 bimetal construction for long life Variable tooth pitch 4–6 TPI for mixed materials 27 mm width and 0.90 mm thickness for precise cuts Suitable for profiles, tubes and stainless steels Endurance for repetitive industrial cutting The blade is built from HSS M42 bimetal, combining a high-speed steel cutting edge with a resilient backing to resist tooth wear and maintain geometry under load. This construction increases blade life and reduces replacement frequency, which directly improves uptime and lowers overall process cost. The hardened cutting strip offers consistent edge retention during longer runs, while the bimetal bond helps absorb the flexing forces that occur on wider cutting cycles. Versatile tooth geometry for varied applications Equipped with a variable tooth pitch (rated at 4–6 TPI) the saw blade handles mixed batches and varying section sizes with reduced vibration and improved surface finish. Recommended pitch ranges include combinations such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake for vibration-prone sawing and efficient profiling of tubes and thin-to-medium wall sections. For high removal rates and tougher workpieces, tooth groupings like 3/4 and 4/6 with a positive rake deliver higher cutting performance, making the blade suitable for normal, tool and high-speed steels as well as non-ferrous metals and solid billets. These tailored tooth groupings balance chip evacuation, cutting force and stability for practical workshop use. Practical dimensions and workshop integration The 2825 x 27 x 0.90 mm format provides a stable cutting platform for standard metal cutting band saws while the 27 mm width supports straightness and good guidance in the saw wheels. Supplied in a packaging unit of 5, the blade is intended for users who need both ready availability and easy stock rotation. Its construction makes it particularly effective for profiles and tubes, small to medium wall thickness work and a wide range of steels including stainless and tool steels, as well as non-ferrous materials. For selection clarity, match the tooth grouping and rake specification to the workpiece and feed rate to optimise life and cut quality. For dependable sawing performance with TECWERK's HSS M42 quality, contact Metav Werkzeuge for tailored advice and secure supply from their Emmerich hub Technical data Article number: 2000813972NW Product label: Metal band saw blade 2825 x 27 x 0.90 mm HSS M42 variable tooth pitch 4–6 Manufacturer: TECWERK Packaging unit: 5 Facts Length: 2825 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 4–6 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Variable tooth pitch for mixed workpiece sizes Recommended pitch groupings and rake options: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake); 3/4 and 4/6 (positive rake) Suited for vibration-prone sawing, profiles and tube cuts with small/medium wall thickness Suitable materials: construction steel, tool steel, stainless steel, non-ferrous metals, solid material and thicker profiles High wear resistance and universal application range FAQ What materials can this blade cut effectively? The TECWERK metal band saw blade (SKU 2000813972NW) is suitable for construction, tool and stainless steels, non-ferrous metals and solid sections, as indicated by the HSS M42 bimetal design. When should the 0° rake grouping be chosen? The 0° rake groupings (for example 5/8, 6/10, 8/12, 10/14, 14/18) are recommended for vibration-prone sawing and for profiling and tube cuts with small to medium wall thickness. Which tooth grouping gives the highest removal rate? Groupings such as 3/4 and 4/6 with a positive rake provide higher cutting performance and are well suited for tougher materials like tool steel and high-speed steels. How does the variable pitch improve cutting results? Variable pitch reduces harmonic frequencies during cutting, which lowers vibration and improves surface finish; it also helps the blade perform across a range of section sizes without rapid degradation. Is this blade suitable for smaller workshop band saws? With a width of 27 mm and thickness of 0.90 mm, the blade fits standard metal cutting band saws that accept a 27 mm blade and delivers stable guidance for accurate cuts. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from the wear resistance of HSS M42 bimetal and the adaptability of a variable tooth pitch for reliable, versatile sawing in mixed materials; order the blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Metal band saw blade 2825 x 27 x 0.90 mm, HSS M42, 6–10 TPI The TECWERK metal band saw blade designed for versatile workshop and industrial sawing tasks, offering durable HSS M42 teeth and a variable tooth pitch for mixed-material cutting. HSS M42 bimetal construction Variable tooth pitch 6–10 TPI Width 27 mm, thickness 0.9 mm Length 2,825 mm for standard band saws Durable, wear‑resistant cutting for frequent use The blade combines HSS M42 teeth welded to a flexible backing, creating a bimetal structure that balances hardness and toughness. This construction extends tool life under continuous operation and reduces the frequency of tool changes, supporting a smoother production flow. The high-speed steel teeth maintain sharpness on demanding materials, while the flexible backing resists breakage, so the band performs consistently even in repetitive cutting cycles. Such reliability translates into predictable machining times and lower unscheduled downtime. Adaptable tooth geometry for mixed-materials and profiles A variable tooth pitch (specified here as 6–10 TPI) smooths chip evacuation and reduces vibration when cutting heterogeneous sections. The data recommends specific pitch and rake combinations: pitches like 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle for vibration-prone cuts and smaller or medium wall-thickness tubes and profiles; finer pitches with a positive rake produce higher cutting performance for solid stock and tougher alloys. Explaining briefly: TPI means teeth per inch and a variable pitch mixes tooth spacings to avoid harmonic chatter, which is especially useful for profile and tube sawing in workshops where workpiece geometry varies. Practical dimensions and workshop benefits With a working width of 27 mm and thickness 0.9 mm, and an overall length of 2,825 mm, the blade fits a wide range of standard band saws used in metalworking environments. The medium width provides a good balance between cutting stiffness and kerf size, making the blade suitable for both thin-walled profiles and general-purpose cutting. Supplied in a packaging unit of 5, the blades are ready for immediate integration into production or maintenance inventories, reducing procurement complexity. The combination of geometry and material means efficient cutting across construction steels, tool steels, stainless steels and many non‑ferrous materials, while keeping surface finish and dimensional consistency at a high level. Efficient operation and reduced process risk The construction and tooth design aim to lower cutting forces and limit heat build-up, which helps preserve both blade life and workpiece integrity. Reduced vibration from the variable tooth pitch leads to fewer rejects and less rework, improving throughput and cost-efficiency. For operations seeking predictable performance across varied materials and shapes, the blade offers a pragmatic balance of endurance and cutting speed. For specific high-performance tasks—such as cutting hardened or unusually thick sections—consultation on the recommended pitch and rake combination will ensure optimal results. For expert advice on selecting the right TECWERK band saw blade and fast supply from Metav Werkzeuge, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 2000813973NW Label: Metallsägeband 2825x27x0,90mm HSS M42 ZpZ 6-10 TECWERK Manufacturer: TECWERK Product type: Metal band saw blade Packaging unit: 5 Core data Length: 2,825 mm Width: 27 mm Thickness: 0.9 mm Teeth per inch: 6–10 TPI Tooth form: variable tooth pitch Special features HSS M42 bimetal construction Particularly wear‑resistant bimetal blade Suitable for profile and tube cuts of small/medium wall thickness Recommended tooth pitch and rake combinations for varied applications Excellent for vibration‑prone sawing tasks Universal use for construction, tool and stainless steels and non‑ferrous metals FAQ Which machines fit this band saw blade? The TECWERK metal band saw blade (SKU 2000813973NW) fits standard band saw frames that accept a 2,825 mm blade length and a 27 mm width; ensure the saw’s guide and wheel configuration supports a 0.9 mm blade thickness. What does variable tooth pitch mean in practice? Variable tooth pitch mixes different tooth spacings to break up harmonics; the 6–10 TPI range on this blade improves chip evacuation and reduces chatter when sawing mixed geometries and thin to medium wall‑thickness profiles. For which materials is the blade recommended? This bimetal HSS M42 blade is specified for construction steels, tool steels, stainless steels and many non‑ferrous metals, and it performs well on both solid stock and profiles as described in the product data. How should tooth pitch be selected for specific jobs? Follow the pitch and rake guidance: pitches like 5/8 to 14/18 with a 0° rake for vibration‑prone or thin‑walled profiles; finer pitches with a positive rake for high removal rates in solid materials—adjust according to wall thickness and material hardness. How many blades are supplied per package? The product is supplied in a packaging unit of 5, suitable for stocking replacements or small production runs. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS M42 bimetal construction combined with a variable tooth pitch for reliable cuts across mixed materials; the robust 2950 x 27 x 0.90 mm format supports profile and pipe cutting while maintaining blade life. Order directly via Metav Werkzeuge or consult the Metav specialists for pitch selection and cutting strategy. TECWERK metal bandsaw blade – 2950 x 27 x 0.90 mm, HSS M42, variable tooth pitch The TECWERK metal bandsaw blade is a high-performance saw blade designed for precision cutting of profiles, tubes and solid sections in workshop and industrial settings. HSS M42 bimetal construction Variable tooth pitch 5–8 TPI Suitable for profile and tube cutting Robust for vibration-prone sawing Consistent cutting power for mixed materials The blade’s HSS M42 bimetal composition pairs a high-speed steel cutting edge with a resilient backing strip, delivering a balance of hardness and toughness that extends tool life under intermittent loading. This construction enables dependable performance on a wide range of materials, including construction steels and tool steels, with the added benefit of improved resistance to wear. The specified 2950 x 27 x 0.90 mm dimensions ensure compatibility with standard metalworking band saws while providing a stable cutting line over longer runs. Variable tooth pitch reduces chatter and improves feed rates A variable tooth pitch (5–8 TPI) reduces harmonic vibration and distributes cutting forces across multiple tooth spacing, which is especially useful for vibration-prone sawing and mixed-section work. Where surface finish and blade life matter, alternating pitch helps prevent teeth from loading or overheating, allowing higher feed rates without sacrificing accuracy. For demanding tasks such as thin-walled tubes or small-profile sections, the variable geometry promotes smooth chip evacuation and consistent kerf quality. Designed for workshop reliability and universal use The blade is configured for universal workshop use: it performs well on construction, tool and stainless steels, and is applicable to non-ferrous metals and full sections when the correct tooth pitch is selected. The combination of bimetal hardening and variable tooth spacing makes this blade a practical choice for shops that face diverse jobs, reducing the need for frequent blade swaps and simplifying stock management. Maintenance is straightforward: regular inspection for tooth wear and correct saw tension preserves cutting accuracy and reduces downtime. Practical recommendations for pitch selection and setup Recommended pitch ranges cover a broad spectrum of applications. Coarser pitches and a positive rake are indicated for aggressive material removal in solid sections, while finer or variable pitches with a 0° rake excel in thin-walled or vibration-sensitive cuts. Correct saw alignment, proper blade tension and suitable coolant or lubrication strategy will extend service life and improve cut quality. For assistance choosing the optimal tooth pitch or to confirm compatibility with specific alloys, Metav’s technical advisors can provide tailored guidance and cutting charts. Contact Metav Werkzeuge for tailored pitch advice and fast supply from Emmerich – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for expert selection and order support Technical data Article number: 2000813974NW SKU: 2000813974NW Name: Metal bandsaw blade 2950 x 27 x 0.90 mm HSS M42 Brand: TECWERK Facts Length: 2950 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 5–8 TPI Packaging unit: 5 Special features HSS M42 bimetal material Variable tooth pitch for reduced vibration Recommended for profile and pipe cuts of small to medium wall thickness Suitable for construction steel, tool steel, stainless steel and non-ferrous metals Configurations with positive rake for high material removal and variable pitch for universal use FAQ What materials can this TECWERK metal bandsaw blade cut? The TECWERK metal bandsaw blade with HSS M42 bimetal is suitable for construction steel, tool steel, stainless steel and many non-ferrous metals; pitch selection tailors performance to the workpiece. Which tooth pitch should be chosen for thin-walled tubes? For thin-walled tubes and vibration-sensitive cuts, the variable pitch options such as 5/8 or 6/10 (within the 5–8 TPI range) with a neutral rake provide smoother cutting and less vibration when using the TECWERK blade. How does the HSS M42 bimetal construction benefit workshop use? The bimetal design combines a wear-resistant HSS M42 cutting edge with a flexible backing, improving blade life under cyclic loads and reducing the frequency of blade replacements in mixed-production environments. Is the blade compatible with standard metal bandsaws? Yes, the 2950 x 27 x 0.90 mm dimensions match common industrial and workshop band saw frames; confirm guide and wheel clearances before fitting. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Wear-resistant HSS M42 bimetal construction and a variable tooth pitch deliver long runtime and clean cuts across mixed materials; the 27 mm width and 0.90 mm thickness provide stable guidance for profile and tube sawing. Order the metal band saw blade directly via Metav Werkzeuge or ask our consultants if needed Metal band saw blade 2950 x 27 x 0.90 mm HSS M42 ZpZ 4–6 TECWERK — HSS M42 bimetal, variable tooth pitch The metal band saw blade 2950 x 27 x 0.90 mm HSS M42 is designed for precision cutting of profiles, tubes and solid sections across a wide range of steels and non‑ferrous metals in workshop and industrial environments Wear-resistant HSS M42 bimetal construction Variable tooth pitch for mixed-material cutting Suited for vibration-prone profile and tube cuts Positive rake options for high cutting performance Durable cutting performance that reduces downtime Manufactured in HSS M42 bimetal, this band delivers high wear resistance and consistent edge retention, which translates into longer life between blade changes and fewer interruptions on the production line. The bi‑metal construction bonds a high-speed cutting edge to a resilient backing, combining hardness with toughness; the result is reliable performance on both solid sections and profiles. Reduced rework and less frequent blade replacement contribute directly to improved throughput and lower operating costs. Tooth pitch options for tailored cutting results The variable tooth pitch is a decisive advantage when sawing mixed batches or workpieces that vary in thickness. The blade supports several pitch configurations: fine pitches with a positive rake for high cutting speed on solids and thicker profiles, and 0° rake options for smoother cutting where vibration is a concern. Selecting the appropriate TPI (teeth per inch) setting stabilises the cut, reduces chatter and optimises chip evacuation, so operators obtain cleaner edges and extend blade life. Guidance on pitch selection simplifies setup and increases first‑pass success rates. Practical suitability for profile, tube and general metal cutting Engineered for profile and tube sawing as well as general workshop applications, this band is particularly effective in vibration‑prone operations thanks to its variable pitch geometry. The combination of robust 27 mm width and 0.90 mm thickness provides stability on smaller and medium wall‑thickness sections, while the tooth geometry options enable efficient work on construction, tool and stainless steels as well as non‑ferrous metals. For procurement managers the blade represents a practical balance between cutting performance and service life, making it a sound choice for mixed‑workshop environments where flexibility and reliability matter. Contact Metav Werkzeuge today to discuss the suitability and availability of the TECWERK HSS M42 metal band saw blade and arrange the best pitch configuration for the intended materials Technical data Article number: 2000814004NW Label: Metal band saw blade 2950 x 27 x 0.90 mm HSS M42 ZpZ 4–6 TECWERK Manufacturer: TECWERK Product type: Metal band saw blade Facts Total length: 2950 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 4–6 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth pitch: variable tooth pitch Recommended uses: profile and tube cuts, vibration‑prone sawing Rake options: 0° rake and positive rake for high cutting performance Suitable for: construction steel, tool steel, stainless steel, non‑ferrous metals, solid material and thicker profiles FAQ What materials can be cut with this blade? The TECWERK metal band saw blade in HSS M42 is suitable for construction steel, tool steel, stainless steel and non‑ferrous metals, as well as solid sections and profiles, with pitch selection adapted to the material. How does the variable tooth pitch affect cutting quality? Variable tooth pitch reduces vibration and chatter during sawing; the TECWERK blade’s mixed pitch geometry produces smoother cuts and better chip evacuation across varying cross sections. Which pitch is recommended for vibration‑prone cuts? For vibration‑prone profile and tube cuts the 0° rake pitch options are recommended; these configurations on the TECWERK blade improve stability and cut quality on smaller and medium wall‑thickness sections. When should a positive rake be chosen? Positive rake pitches on the blade are advised for high cutting performance on solid materials and thicker profiles, delivering faster cutting rates on normal, tool and high‑speed steels and on non‑ferrous metals. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from a wear‑resistant HSS M42 bimetal design combined with variable tooth pitch and a compact 27 mm width for reliable, versatile metal cutting; order the blade directly via Metav Werkzeuge or consult our technical advisors for application advice. TECWERK metal bandsaw blade 3010 x 27 x 0.90 mm — HSS M42, variable 4–6 TPI The TECWERK metal bandsaw blade is a durable HSS M42 bimetal cutting band engineered for versatile metal sawing, from profile and tube work to demanding cuts in tool and stainless steels. HSS M42 bimetal for high wear resistance Variable tooth pitch for diverse material qualities Optimised for vibration‑prone profile and tube cuts Suitable for steel, tool steel and non‑ferrous metals Increased cutting performance through material and tooth design The combination of HSS M42 bimetal and a variable tooth pitch delivers sustained cutting performance and extended blade life. HSS M42 denotes a high‑speed steel alloy with added cobalt content, which raises hot hardness and wear resistance; this means fewer blade changes during continuous production. Variable pitch reduces harmonic vibration and minimizes chatter when cutting irregular sections, so throughput and cut quality are maintained in mixed‑batch operations. Compact dimensions for flexible machine compatibility and reduced setup time With dimensions 3010 x 27 x 0.90 mm, the blade fits a broad range of metal bandsaw machines while its 27 mm width keeps kerf loss low, increasing material yield. The 0.90 mm thickness balances rigidity and flexibility for tight contours without excessive bending forces. These physical parameters help reduce setup time and tool inventory, supporting lean workshop processes and a smoother production flow. Practical tooth‑pitch choices for specific applications The blade’s 4–6 TPI range and variable pitch capability allow selection of tooth spacing and rake to match the workpiece. Options with a 0° rake are recommended for vibration‑prone cuts and for profiles and tubes with small to medium wall thickness, providing a controlled cut without aggressive chip formation. Configurations with a positive rake (for example finer pitches) increase material removal rate and are suited to high cutting performance on normal, tool and high‑speed steels as well as non‑ferrous metals. These tuning options give machining departments the flexibility to prioritise finish quality or throughput as required. Operational benefits and workshop integration The blade’s wear resistance and pitch design reduce the risk of tooth fracture and blade elongation, lowering downtime and total cutting costs over life cycle. Packaged in units of five, the product simplifies reordering and replacement planning. For workshops transitioning between construction steels, stainless varieties and non‑ferrous alloys, this blade reduces the need for multiple specialised stocks while delivering consistent results — a practical choice for maintenance shops, contract cutters and production lines alike. For reliable, application‑specific advice and to secure TECWERK HSS M42 metal bandsaw blades for immediate supply contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendations and order support Technical data Article number: 2000813975NW Manufacturer: TECWERK Product type: metal bandsaw blade Facts Length: 3010 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 4–6 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Variable tooth pitch Suitable for profile and tube cuts Recommended for construction, tool and stainless steels Applicable to non‑ferrous metals and full material sections Options for 0° and positive rake tooth geometries FAQ Which materials are suitable for this bandsaw blade? The TECWERK metal bandsaw blade is designed for a broad range of materials including construction steel, tool steel, stainless steel and non‑ferrous metals, as well as profiles and tubing. What tooth pitch is recommended for vibration‑prone profile cuts? For vibration‑prone profile and tube cuts, pitches such as 5/8, 6/10 or similar with a 0° rake are recommended to stabilise cutting and improve surface quality when using the TECWERK HSS M42 blade. Which tooth configuration gives the highest material removal rate? Finer pitches with a positive rake, for example 3/4 or 4/6, provide higher cutting aggressiveness and are suitable for demanding removal on normal and tool steels as well as non‑ferrous alloys with the TECWERK blade. What are the blade dimensions and how do they affect machine compatibility? The blade measures 3010 mm in length, 27 mm in width and 0.90 mm in thickness; these dimensions suit many standard metal band saws and influence kerf width, rigidity and allowable cut profiles. How is the product delivered and how many blades per pack? The blade is supplied in a packaging unit of 5, facilitating inventory planning and scheduled replacement. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the wear‑resistant HSS M42 bimetal construction and the variable tooth pitch to handle a wide range of steels and non‑ferrous materials with fewer blade changes and more consistent cuts; order the TECWERK band saw blade directly via Metav Werkzeuge or request specialist advice from our consultants. TECWERK metal band saw blade 3320 x 27 x 0.9 mm (HSS M42), variable pitch 4–6 TPI The TECWERK metal band saw blade 3320 x 27 x 0.9 mm (HSS M42) is a robust industrial blade designed for cutting steels, profiles and non‑ferrous materials in workshop and light industrial settings. HSS M42 bimetal construction for high durability Variable tooth pitch 4–6 TPI for versatile cutting 3320 x 27 x 0.9 mm for standard band saw frames Excellent for steels, profiles and non‑ferrous metals Durable material and industrial‑grade wear resistance Constructed from HSS M42 in a bimetal configuration, this blade combines a high‑performance cutting edge with a flexible backing for operational resilience. The welded tooth strip provides wear‑resistant behaviour under sustained loads, which results in durability and a longer service life compared with simple high‑speed steels. For operations where frequent blade changes interrupt throughput, the enhanced life of this solution contributes directly to lower maintenance intervals and steadier production. Tooth geometry engineered for mixed materials and stable cutting The variable tooth pitch at 4–6 TPI offers a balance between aggressive cutting and clean chip removal; fewer teeth per inch evacuate larger swarf while finer pitches give smoother finishes. Certain pitches are recommended for specific tasks: denser arrangements with a positive rake angle support high material removal rates in bulk cutting, while other configurations at 0° rake are intended for vibration‑prone cuts such as thin‑walled profiles and tubing. The result is improved cutting performance across a range of component geometries. Designed for easy integration with standard saw frames and profile work With overall dimensions of 3320 x 27 x 0.9 mm, the blade is compatible with many common band saw frames used in small and medium workshops. The nominal width and thickness ensure correct tracking and tensioning in standard frames, while the tooth form and backing steel are suited to cutting profiles and tubes with small to medium wall thicknesses. Installation is straightforward: set correct tension and align guides to achieve reduced chatter and predictable cutting behaviour. Operational advantages: longer runtime and consistent part quality The combined effect of material choice and optimized tooth geometry is a longer runtime and reduced downtime for blade changes, which supports more efficient workflows and stable output quality. Surface finish and dimensional repeatability are improved, particularly when machining tool steels and stainless varieties where tooth integrity matters. Supplied in a practical pack, the blade is intended for frequent use in production and trade environments where reliability matters. Order the TECWERK HSS M42 band saw blade through Metav Werkzeuge for dependable workshop performance; for application guidance or detailed cutting recommendations contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000813976NW Product: Metal band saw blade Manufacturer: TECWERK Core specifications Length: 3320 mm Width: 27 mm Thickness: 0.9 mm Teeth per inch: 4–6 TPI Pack size: 5 pieces Special features Material: HSS M42 bimetal Variable tooth pitch for versatile applications Recommended for: normal steel, tool steel, high‑speed steel, stainless steel, non‑ferrous metals, full material, profiles and tubing Typical recommended pitches and use cases: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake) for vibration‑prone, profile and tube cuts; 3/4 and 4/6 (positive rake) for high removal rate in solid and thicker materials FAQ What materials can be cut with this band saw blade? The TECWERK metal band saw blade 3320 x 27 x 0.9 mm (SKU 2000813976NW) is suitable for a broad range of materials including normal steels, tool steels, stainless steels and many non‑ferrous metals, as well as profiles and tubing. How does the variable tooth pitch affect cutting results? Variable pitches on this blade balance cutting aggressiveness and chip evacuation; coarser sections remove material quickly while finer sections produce better surface finish, enabling versatile use across different workpieces. Is the blade compatible with standard workshop band saws? Yes. The blade’s 3320 x 27 x 0.9 mm dimensions are intended for standard band saw frames commonly used in workshops; correct tensioning and guide alignment are recommended for optimal tracking. Which tooth pitch should be used for thin‑walled tubes and profiles? For vibration‑sensitive cuts such as thin profiles and small‑section tubing, the recommended pitches with 0° rake (for example 5/8, 6/10) are well suited to reduce chatter and produce cleaner cuts. How does the HSS M42 bimetal construction benefit workshop operations? The HSS M42 bimetal construction offers enhanced edge life and wear resistance compared with standard high‑speed steels, resulting in fewer blade changes and more consistent throughput in production environments. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of wear‑resistant HSS M42 bimetal construction, consistent cutting performance and a variable tooth pitch that handles mixed materials — ensuring efficient production and reduced rework. Order the TECWERK band saw blade directly via Metav Werkzeuge or ask our consultants if needed. TECWERK bi‑metal band saw blade 3660 x 27 x 0.90 mm — HSS M42, 4–6 TPI A TECWERK bi‑metal band saw blade 3660 x 27 x 0.90 mm designed for robust metal cutting in workshop and industrial band saw applications HSS M42 bimetal for high wear resistance Variable tooth pitch 4–6 TPI for mixed materials 3660 x 27 x 0.90 mm for standard band saw frames Suited to vibration‑prone cuts and tube/profile work Proven material and construction for uninterrupted production The blade’s HSS M42 bimetal composition offers a significant increase in wear resistance and edge retention compared with standard high‑speed steels. This construction combines a flexible backing with a high‑performance cutting edge, reducing the frequency of blade changes and downtime. For production environments where consistent throughput matters, the durable alloy means fewer interruptions, lower total tool consumption and steadier cutting quality over longer shifts. Variable tooth pitch that adapts to diverse materials A variable tooth pitch (4–6 TPI) provides a balance between aggressive chip removal and smooth surface finish when sawing a mix of materials. The variable spacing prevents the teeth from loading with swarf, which is especially useful when working with profiles, tubes and solid bars of differing quality. Where higher cutting forces are required, the recommended toothings and positive rake variants improve material evacuation and cutting efficiency, making the blade suitable for construction steels, tool steels and non‑ferrous metals alike. Practical dimensions and applications for workshop compatibility With a length of 3660 mm, width 27 mm and thickness 0.90 mm, the saw band fits many common industrial band saw frames and is a practical choice for both maintenance stock and continuous production use. The geometry supports reliable tracking and reduces vibration in sensitive cuts, which benefits small to medium wall‑thickness profiles and tube sections. Procurement from a trusted partner like Metav gives access to consistent supply and product selection tailored to industrial needs. Contact Metav Werkzeuge for tailored advice on blade selection or to arrange supply of this TECWERK bi‑metal band saw blade for your production needs Technical data Article number: 2000814005NW Product: Bi‑metal band saw blade Manufacturer: TECWERK Facts Total length: 3660 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 4–6 TPI Pack quantity: 5 Special features Material: HSS M42 bimetal construction Variable tooth pitch for mixed materials Recommended for profiles, tubes and vibration‑prone cuts Suitable for construction, tool and stainless steels and non‑ferrous metals FAQ How does the HSS M42 bimetal construction benefit cutting performance? The HSS M42 bimetal edge on the TECWERK bi‑metal band saw blade 3660 x 27 x 0.90 mm delivers improved wear resistance and longer life, reducing blade changes and maintaining cut quality over extended runs. Is this blade suitable for cutting tubes and profiles? Yes, the blade’s variable tooth pitch and robust backing make it well suited for tube and profile work, including smaller and medium wall thicknesses where vibration control is important. Which materials can be cut with this saw band? The saw band is designed for a range of materials: construction and tool steels, stainless steels and non‑ferrous metals, offering universal applicability in mixed‑material workshops. What does 4–6 TPI mean for cutting behaviour? A 4–6 TPI range provides a compromise between fast chip removal and good surface finish; variable spacing helps prevent clogging when handling different material types. Can the blade be used for heavy section cutting in standard band saws? The dimensions and HSS M42 cutting edge make this blade suitable for heavier sections within the limits of the saw machine; selection should match machine capacity and recommended tooth pitch. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS M42 bimetal construction, variable tooth pitch for mixed materials, and precise 3660 x 27 x 0.90 mm dimensions to maintain a continuous, low-downtime cutting operation. Order the blade directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. Metal band saw blade 3660 x 27 x 0.90 mm — HSS M42, variable 10–14 TPI (TECWERK) The Metal band saw blade 3660 x 27 x 0.90 mm — HSS M42 is a high-performance bimetal blade engineered for versatile metal cutting across a range of materials and profiles HSS M42 bimetal construction Variable tooth pitch 10–14 TPI 3660 x 27 x 0.90 mm dimensions Ideal for vibration-prone cutting High-performance cutting across mixed materials The HSS M42 bimetal design combines a hardened tooth edge with a flexible backing strip, offering an optimal balance between wear resistance and fracture toughness. This construction reduces the frequency of blade changes and supports longer runs in continuous production. The variable tooth pitch enhances chip evacuation when working with different sections, while the 10–14 TPI setting targets medium-fine cutting tasks and is particularly effective where material quality varies. For procurement and production planners, this translates into predictable cut quality and fewer interruptions. Low-vibration cuts for profiles and tubes A key benefit of this blade is its suitability for vibration-prone operations. The tooth geometry and recommended zero-degree rake on several pitch options minimise chatter, improving surface finish on profiles and tubes with small to medium wall thickness. When cutting structural steel, stainless types or thin-walled sections, the stability of the blade means fewer rejects and faster downstream processing. The design therefore supports consistent tolerance retention in repetitive fabrications. Reduced downtime through robust bimetal construction The bimetal composition in HSS M42 ensures superior resistance to abrasive wear and heat, extending blade life in demanding applications such as tool steel and stainless steel cutting. Because the teeth are manufactured from high-speed steel welded to a flexible backer, the blade resists tooth breakage while maintaining flexibility for tracking. The result is lower tooling consumption and a measurable improvement in overall equipment effectiveness, particularly in shops where changeover time is costly. Practical guidance for machine compatibility and application With overall dimensions of 3660 x 27 x 0.90 mm, the blade fits band saws that accept this length and width; confirm guide roller and wheel capacity before installation. The variable tooth pitch configuration listed as 10–14 TPI offers versatility: finer pitches suit thin materials and finishing cuts, while coarser pitches handle thicker sections and full profiles. For best performance, select the pitch that matches the workpiece geometry and ensure correct tension and coolant application to preserve tooth life and cut quality. For reliable metal cutting with TECWERK’s HSS M42 bimetal technology, contact Metav Werkzeuge for product selection and application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right blade configuration for specific workflows Technical data SKU: 2000814007NW Label: Metallsägeband 3660x27x0,90mm HSS M42 ZpZ 10-14 TECWERK Product type: Metal band saw blade Facts Total length: 3660 mm Width: 27 mm Thickness: 0.90 mm Tooth pitch: 10–14 TPI Pack quantity: 5 Special features Material: HSS M42 bimetal Variable tooth pitch suited to mixed-material cutting Recommended for vibration-prone sawing, profiles and tubes Suitable for construction, tool and stainless steels, non-ferrous metals FAQ What materials is this blade suitable for? The TECWERK metal band saw blade in HSS M42 is designed for a wide range of metals, including construction steel, tool steel and stainless steel, as well as various non-ferrous materials according to the variable tooth pitch used. How does the variable tooth pitch improve cutting? Variable tooth pitch on the HSS M42 blade minimises resonance and improves chip evacuation, which leads to smoother cuts and reduced risk of vibration-related defects when sawing differing profiles. Which pitch should be chosen for thin-walled tubes? For thinner-walled tubes and finishing cuts, the finer end of the 10–14 TPI range is recommended to deliver a cleaner edge and reduced tearing on delicate sections. How does the bimetal construction affect blade life? The bimetal construction, combining high-speed steel teeth with a resilient backer, increases wear resistance and toughness, leading to longer service life and fewer blade changes in production environments. Is this blade compatible with standard band saws? Compatibility depends on wheel diameter and guide set-up; the blade’s dimensions of 3660 x 27 x 0.90 mm suit saws that accept those measurements—check machine specifications before purchase. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a wear‑resistant HSS M42 bimetal construction and a variable tooth pitch that delivers consistent cutting across mixed materials; order directly via Metav Werkzeuge or contact our consultants for application advice. Metals bandsaw blade 3660×27×0.90 mm HSS M42, variable 6–10 TPI (TECWERK) A Metals bandsaw blade 3660×27×0.90 mm HSS M42 designed for durable cutting of steels, stainless steels and non‑ferrous materials in profile and tube applications Wear‑resistant HSS M42 bimetal construction Variable tooth pitch 6–10 TPI for versatile cuts 3660×27×0.90 mm compatible with common frames Suitable for profiles, tubes and mixed materials Robust alloy and longer blade life for steady production The HSS M42 bimetal core combines a high‑speed steel cutting edge with a flexible backing to extend service life while maintaining cutting performance. This construction reduces the frequency of blade changes and contributes to a more predictable production rhythm, which benefits planning and reduces unplanned downtime. The result is a practical balance between durability and cutting capability that suits busy workshops and industrial saw benches. Versatile tooth geometry to match material and task Equipped with a variable tooth pitch, nominally 6–10 TPI, the blade covers a wide range of cutting conditions. Variable pitch reduces vibration and helps avoid harmonic chatter in mixed‑section cuts, while recommended pitch ranges and rake angles allow optimisation: pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake perform well in vibration‑prone sawing and thin‑walled profiles, whereas coarser options with a positive rake are suggested for demanding cuts in tougher or solid materials. This flexibility translates into fewer tool changes and more efficient material throughput. Size and compatibility for common saw frames and workpieces With a nominal size of 3660×27×0.90 mm, the blade fits many standard band saw frames used for light to medium industrial work. The 27 mm width and 0.90 mm thickness provide a compromise between lateral rigidity and the ability to follow tighter contours in profiles and tubing. The blade is well suited to cutting profiles, tubes, construction and tool steels, stainless steels and a range of non‑ferrous metals, making it a practical choice for workshops that handle a diversity of materials without specialised blades for every task. Operational benefits and trusted supply chain Choosing a bimetal HSS blade reduces the total cost of ownership by combining service life with consistent cut quality. The variable pitch design eases performance across mixed sections and helps maintain surface finish on both solid stock and thinner‑walled components. For procurement and application support, Metav Werkzeuge acts as a reliable partner with a quality filter based in Emmerich, offering consolidated sourcing and technical guidance for industrial and trade buyers. For specific machining scenarios, technical consultants can advise on pitch selection and feed/speed settings to extract maximum efficiency from the blade. For tailored advice on TECWERK HSS M42 bandsaw blades and frame compatibility, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for expert consultation Technical data Article number: 2000813977NW Brand: TECWERK Product type: Metal bandsaw blade Facts Length: 3660 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 6–10 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth configuration: variable pitch Recommended pitches: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake) Coarser pitches: 3/4, 4/6 with positive rake for high cutting performance Applications: profiles, tubes, solid material, construction steels, tool steels, stainless steels, non‑ferrous metals Ideal for vibration‑prone sawing and medium‑wall profiles FAQ Which materials can be sawn with this blade? The TECWERK metals bandsaw blade in HSS M42 is suitable for construction and tool steels, stainless steels and a variety of non‑ferrous metals, as well as solid stock and profiles. How does the variable tooth pitch help in practice? Variable tooth pitch reduces vibration and improves cut stability across mixed sections; the 6–10 TPI range is a versatile compromise for many workshop applications. When should a pitch with 0° rake be chosen? Pitches listed such as 5/8, 6/10, 8/12 and similar with a 0° rake are recommended for vibration‑prone cuts and for thin‑walled tubes and profiles to maintain a steady cut without aggressive chip formation. Can the blade be used for thick solid material? For thicker solids and tougher steels, coarser pitches with a positive rake (e.g. 3/4 or 4/6) deliver higher cutting performance; select the appropriate pitch based on material and saw machine capability. Is this blade compatible with standard industrial band saw frames? The 3660×27×0.90 mm dimension is compatible with many standard frames; check the machine’s blade length and width specifications before fitting the TECWERK blade. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Metallsägeband 3660 x 27 x 0,90 mm HSS M42 ZpZ 5-8 — Metallsägeband von TECWERK Das Metallsägeband 3660 x 27 x 0,90 mm HSS M42 ZpZ 5-8 ist ein verschleißfestes Bimetall-Sägeband für präzise und vielseitige Metallschnitte in Werkstatt und Industrie HSS M42 Bimetall für hohe Verschleißfestigkeit Variable Zahnteilung für unterschiedliche Werkstoffe 3660 mm Länge, 27 mm Breite für Standardbänder Zahnteilung 5–8 ZpZ für schwingungsarme Schnitte Verpackungseinheit 5 für effiziente Lagerung Hohe Standzeit durch robustes Material Das HSS M42 Bimetall kombiniert eine zähe Bandgrundlage mit einer Verschleiß hartlegierten Schneidkante, was zu deutlich längerer Standzeit führt als einfache Schnellarbeitsstahl-Bänder. Für Anwender bedeutet das weniger Stillstandzeiten und geringere Werkzeugkosten pro Schnitt, weil Nachschärfen und Bandwechsel seltener erforderlich sind. Diese Materialkombination ist besonders vorteilhaft bei hohen Schnittbelastungen und wiederholten Schnitten. Variable Zahnteilung verbessert Schnittverhalten Die variable Zahnteilung reduziert Vibrationen und sorgt für gleichmäßigere Spanabfuhr bei wechselnden Materialqualitäten. Die Angabe 5–8 ZpZ steht für 5 bis 8 Zähne pro Zoll und ist ideal für schwingungsanfällige Schnitte sowie Profil- und Rohrschnitte kleinerer bis mittlerer Wandstärke. Für weniger erfahrene Anwender: ZpZ bedeutet Zähne pro Zoll und beeinflusst Spanbildung, Oberfläche und Schnittgeschwindigkeit. Vielseitiger Einsatz in Werkstatt und Produktion Empfohlenes Einsatzspektrum beinhaltet Bau-, Werkzeug- und Edelstahl sowie NE-Metalle und Vollmaterial. Die Einsatzempfehlung der Zahnteilungen ermöglicht die Anpassung an verschiedene Aufgaben: feineres Verzahnen für glatte Oberflächen und gröbere Verzahnung für zügige Querschnitte. Herstellerangaben zeigen, dass das Band auch für Profil- und Rohrschnitte gut geeignet ist, wodurch es sich als universelles Arbeitsmittel für Metallbauer, Instandhaltung und Serienzuschnitt empfiehlt. Praktische Handhabung und Wirtschaftlichkeit Mit einer Verpackungseinheit von 5 Bändern lässt sich der Vorrat planbar verwalten; das reduziert Beschaffungsaufwand und sichert Betriebskontinuität. Anwender profitieren von der Kombinationsmöglichkeit verschiedener Zahnprofile und dem empfohlenen Spanwinkel von 0 Grad bei bestimmten Zahnteilungen, was das Band besonders für schwingungsanfällige Anwendungen prädestiniert. Das Ergebnis ist eine gute Balance aus Leistung und Wirtschaftlichkeit. Für präzise, langlebige Metallschnitte empfehlen wir das TECWERK Metallsägeband; bei Fragen zur Auswahl oder zur Lieferung berät Metav Werkzeuge gern per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 2000814006NW Marke: TECWERK Produktart: Metallsägeband Material: HSS M42 Bimetall Fakten Gesamtlänge: 3660 mm Breite: 27 mm Stärke: 0,90 mm Zähne pro Zoll: 5-8 Verpackungseinheit: 5 Besonderheiten Variable Zahnteilung ZpZ = Zähne pro Zoll Einsatzempfehlung: Zahnteilung 5/8, 6/10, 8/12, 10/14, 14/18 0 Grad Spanwinkel für bestimmte Zahnteilungen Besonders verschleißfestes Bimetall-Sägeband FAQ Für welche Werkstoffe ist dieses Band geeignet? Das Metallsägeband 3660 x 27 x 0,90 mm HSS M42 ZpZ 5-8 von TECWERK (SKU 2000814006NW) ist ausgelegt für Bau-, Werkzeug- und Edelstähle sowie NE-Metalle, Vollmaterial und Profile mit kleiner bis mittlerer Wandstärke. Welche Zahnteilung sollte für Rohre verwendet werden? Für Profil- und Rohrschnitte kleinerer und mittlerer Wandstärke empfiehlt sich die Zahnteilung 5–8 ZpZ; diese Einstellung reduziert Vibrationen und verbessert die Spanabfuhr beim TECWERK Metallsägeband. Wie verlängere ich die Lebensdauer des Sägebands? Richtige Auswahl der Zahnteilung, die Verwendung des empfohlenen Spanwinkels sowie angepasste Schnittgeschwindigkeit und Kühlung tragen bei. Das HSS M42 Bimetall des TECWERK Bands bietet bereits hohe Verschleißfestigkeit. Wie wird das Band geliefert? Lieferung erfolgt in der Verpackungseinheit 5, so dass das TECWERK Metallsägeband leicht in Vorrat eingeplant werden kann. Passt das Band in Standardbügelsägen mit entsprechenden Maßen? Das Band misst 3660 mm x 27 mm x 0,90 mm und ist für Sägen ausgelegt, die diese Bandabmessungen unterstützen; die Kompatibilität hängt von der jeweiligen Maschine ab. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund

Combine long service life with consistent cutting performance: HSS M42 bi‑metal construction and a variable 6–10 TPI tooth pitch deliver wear resistance and vibration‑tolerant cuts. With dimensions 3770 x 27 x 0.90 mm, this bandsaw blade fits standard metalworking frames and reduces downtime. Order directly via Metav Werkzeuge or ask our consultants for application support. Bi‑metal HSS M42 bandsaw blade 3770 x 27 x 0.90 mm, 6–10 TPI – TECWERK The Bi‑metal HSS M42 bandsaw blade 3770 x 27 x 0.90 mm, 6–10 TPI is engineered for demanding metal‑cutting operations, offering versatility across steels, tool steels and non‑ferrous materials. HSS M42 bi‑metal for high wear resistance Variable tooth pitch 6–10 TPI for versatile cutting 3770 x 27 x 0.9 mm suitable for standard saw frames Suited to steels, tool steel and non‑ferrous metals Consistent cutting performance through material and tooth geometry The blade combines HSS M42 cutting edges welded to a flexible backing, providing a balance of hardness and toughness that extends service life under continuous use. The variable tooth pitch reduces harmonic vibration and chatter, so cuts on thin‑walled profiles and tubes remain true and burr‑reduced. Specified as 6–10 TPI, this tooth configuration is a compromise between chip clearance and surface finish, making it suitable for a wide range of workshop tasks. By choosing a bi‑metal solution, the need for frequent blade changes is lowered, improving throughput on repetitive cuts. Application advantages that increase productivity Designed for both stationary and portable metal bandsaws, the blade excels in applications where a mix of materials is processed. Its construction supports reliable cutting of construction steels, tool steels and various non‑ferrous metals, while the variable pitch helps to avoid resonance on vibration‑sensitive jobs. The result is a measurable improvement in cutting efficiency and a reduction in tool‑related stoppages. For operations focused on productivity, the improved life expectancy and consistent kerf width translate into lower per‑cut costs and fewer interruptions to the production flow. Practical selection and handling for best results Select tooth pitch according to material type and wall thickness: pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake are recommended for vibration‑prone cuts, profile and tube sections of small to medium wall thickness; 3/4 and 4/6 with a positive rake suit high material removal and tougher alloys. Correct blade tension and steady feed rate keep the cutting forces balanced; use an appropriate coolant or cutting fluid for stainless and tool steels to reduce heat and extend life. Ensure the saw frame supports the blade width 27 mm and thickness 0.90 mm for safe operation and consistent tracking. Contact Metav Werkzeuge today for tailored selection advice and reliable supply of TECWERK bandsaw blades from our Emmerich warehouse Technical Data Article number: 2000813980NW Manufacturer: TECWERK Product type: Bandsaw blade for metal Description: Bandsaw blade 3770 x 27 x 0.90 mm, HSS M42, 6–10 TPI, TECWERK Packaging unit: 5 Facts Overall length: 3770 mm Width: 27 mm Thickness: 0.9 mm Teeth per inch: 6–10 Special features Material: HSS M42 bi‑metal Tooth form: variable tooth pitch Recommended pitches: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake); 3/4, 4/6 (positive rake) Suitable for: steels, tool steel, stainless steel, non‑ferrous metals, profiles and tubes Application: vibration‑prone saw cuts; small to medium wall thickness FAQ What materials can this bandsaw blade cut effectively? This bandsaw blade, made in HSS M42 bi‑metal, is suitable for steels, tool steels, stainless steels and a range of non‑ferrous metals, providing reliable cuts across mixed batches. Which tooth pitch should be chosen for thin‑walled tube and profile cutting? For vibration‑sensitive profile and tube cuts, choose one of the recommended pitches such as 5/8, 6/10, 8/12, 10/14 or 14/18 with a 0° rake to reduce chatter and achieve cleaner edges. Is the blade compatible with standard metal cutting bandsaw frames? The blade dimensions 3770 x 27 x 0.90 mm match common metal bandsaw frames; ensure the machine’s guides and wheels accept a 27 mm width and 0.9 mm thickness before fitting. How does variable tooth pitch help in daily use? Variable tooth pitch on this blade disperses vibration frequencies, which reduces noise and improves surface finish on uneven or intermittent cuts, increasing overall process stability. Can the blade be used for heavy machining of solid bars? For heavier solid material and high metal removal demands, select a coarser pitch with a positive rake; the blade construction supports robust cutting but correct pitch and cutting parameters are essential for best life. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of wear‑resistant HSS M42 bimetal, variable tooth pitch for flexible material handling and the precise 27 mm width for stable profiling; order the blade directly via Metav Werkzeuge or consult our specialists for guidance. Metal bandsaw blade 3770 x 27 x 0.90 mm HSS M42 ZpZ 4–6 — HSS M42 bimetal with variable tooth pitch (TECWERK) The metal bandsaw blade 3770 x 27 x 0.90 mm HSS M42 ZpZ 4–6 is a wear‑resistant bimetal blade designed for versatile sawing of a wide range of steels, tool steels and non‑ferrous metals, suitable for profile and tube cutting in light to medium wall thicknesses HSS M42 bimetal for high wear resistance Variable tooth pitch for versatile cutting 27 mm width for stable profile cuts Suitable for steels, tool steel and non‑ferrous metals Consistent cutting performance for mixed workloads The blade offers consistent cutting performance across varying materials because of its HSS M42 bimetal construction and variable tooth pitch. The bimetal design bonds a high‑speed steel cutting edge to a resilient backing strip, which increases wear resistance and extends lifetime under intermittent loading. For workshops handling batches of different alloys, this translates into fewer blade changes and more predictable production cycles, keeping throughput steady even on vibration‑prone cuts. Engineered for narrow profiles and precise feed control With a width of 27 mm and a thickness of 0.9 mm, the geometry supports narrow‑profile work and accurate tracking on the saw wheel. The relatively slim cross section reduces kerf loss while maintaining sufficient rigidity for controlled feed rates; this combination improves material utilisation and helps achieve cleaner finish on smaller profiles. The overall length of 3770 mm ensures compatibility with standard industrial band sawing machines where that blade length is specified. Variable tooth arrangements for material versatility The variable tooth spacing, specified as 4–6 tpi, provides a balance between chip clearance and cutting aggressiveness. Coarser pitches on the same blade manage larger cross sections and high‑chip materials, while finer sections give smoother cuts on thinner or delicate stocks. The variable pattern reduces harmonic vibration and distributes wear, meaning the blade performs reliably on stainless, tool steels and non‑ferrous metals without rapid loss of cutting geometry. Practical handling and application recommendations Packaged in units of five, the blade suits workshops that prefer to stock a small series for quick replacement. The blade is particularly recommended for profile and tube cutting of small to medium wall thicknesses and for sawing jobs where vibration could otherwise affect cut quality. Where higher material removal rates are required, select the sections of the blade with a more positive rake; for vibration‑sensitive tasks, the 0° rake sections provide a steadier cut and reduced chatter. For technical advice or to place an order for the TECWERK metal bandsaw blade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will help select the correct tooth pitch and supply options for the application. Technical data Article number: 2000813978NW Product: Metal bandsaw blade Manufacturer: TECWERK Label: Metallsägeband 3770x27x0,90mm HSS M42 ZpZ 4-6 TECWERK Facts Length: 3770 mm Width: 27 mm Thickness: 0.9 mm Teeth per inch: 4–6 tpi Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth form: variable tooth pitch Recommended use: profile and tube cuts of small to medium wall thickness Suitable materials: normal steel, tool steel, stainless steel, non‑ferrous metals Application notes: sections with 0° rake for vibration‑prone cuts; positive rake for high removal rates FAQ What materials is this bandsaw blade best suited for? The TECWERK metal bandsaw blade is suitable for a wide range including normal steels, tool steels, stainless steel and non‑ferrous metals as described in the product information. Which tooth pitch should be chosen for thin‑walled profiles? For profile and tube cuts of smaller wall thicknesses the variable tooth sections with finer pitch and 0° rake on the TECWERK blade provide steadier cutting and reduced vibration. How does the HSS M42 bimetal construction benefit the workshop? The HSS M42 bimetal construction combines a hard cutting edge with a flexible backing, giving improved wear resistance and longer service life compared with simple high‑carbon blades. Is the blade compatible with standard industrial band saws? The blade length of 3770 mm and width 27 mm match common industrial band saw specifications; compatibility depends on the machine’s blade length and guides. What does the packaging unit of five imply for stock planning? A packaging unit of five allows straightforward replenishment cycles for small to medium workshops, reducing downtime by keeping spares on the shelf Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS M42 bimetal construction and variable tooth pitch for long blade life and flexible cutting performance; combine this with the stable 27 mm width and 0.90 mm thickness for reliable results in profile and tube work. Order the blade directly via Metav Werkzeuge or consult our specialists for tailored selection advice. Bi-metal band saw blade 3770 x 27 x 0.90 mm – HSS M42, variable tooth pitch (5–8 TPI) by TECWERK A Bi-metal band saw blade 3770 x 27 x 0.90 mm engineered for demanding metal cutting tasks, suited to a broad spectrum of steels, profiles and tube sections HSS M42 bimetal for high wear resistance Variable tooth pitch for versatile cutting 27 mm width and 0.90 mm thickness for stability Ideal for profiles, tubes and stainless steels Precision performance for mixed metal workshops The HSS M42 bimetal construction provides a durable cutting edge that maintains form under continuous load, making it a practical choice where consistent throughput matters. This bandsaw blade delivers prolonged life in applications involving construction steels, tool steels and stainless steels, thanks to the HSS alloy backing and welded tooth edge. The robust material pairing reduces the frequency of blade changes, contributing directly to lower downtime and steadier production cycles in small and medium workshops. Adaptive tooth geometry for cleaner, faster cuts The variable tooth pitch is designed to reduce vibration and improve chip evacuation when sawing mixed cross-sections. The standard configuration specified for this blade is 5–8 TPI, which balances cutting speed and finish for thinner profiles; alternative pitch groups are recommended for different tasks. For vibration-prone operations and tube or profile cutting, the zero-degree rake setups listed in the specifications help to stabilise the cut; for heavier stock the positive rake pitch options increase material removal rate while maintaining control. Built for durability and consistent feeding With a blade width of 27 mm and a thickness of 0.90 mm, the saw band provides a stable cutting line and improved tracking on most standard band saws. The combination of a slim cross-section and high-grade bimetallic teeth delivers efficient penetration and reduces heat build-up at the kerf. This results in extended life under intermittent and continuous use and contributes to wear resistance that is particularly beneficial when working with abrasive or tough alloys. Practical guidance for common applications The construction of this saw band makes it especially suitable for profiling, tube cutting and smaller- to medium-wall sections where vibration control and edge life are important. Recommended tooth groups outlined in the product details allow selection for specific tasks: fine variable pitches for thin-walled profiles and 3/4 or 4/6 with a positive rake for high metal removal in solid or thicker sections. Match the tooth pitch to the material and section thickness for the best compromise between finish and throughput. Contact Metav Werkzeuge for tailored cutting advice and secure TECWERK bands for high-wear applications — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000813979NW Product: Bi-metal band saw blade 3770 x 27 x 0.90 mm Manufacturer: TECWERK Product type: Metal band saw blade Packaging unit: 5 Core data Length: 3770 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 5–8 Special features HSS M42 bimetal construction Variable tooth pitch Recommended pitch groups with 0° rake for vibration-prone cuts Positive rake options for high cutting performance in solid material Suitable for construction, tool and stainless steels, profiles and tubes FAQ What materials is this bandsaw blade suitable for? The Bi-metal band saw blade 3770 x 27 x 0.90 mm (TECWERK, SKU 2000813979NW) is suitable for construction steels, tool steels, stainless steels, non-ferrous metals and solid profiles within the recommended section ranges. Which tooth pitch should be used for vibration-prone profile cutting? For vibration-prone profile and tube cutting the zero-degree rake tooth groups such as 5/8, 6/10 and 8/12 are recommended when using the TECWERK bands to improve stability and chip clearance. What benefit does HSS M42 bimetal provide? HSS M42 bimetal offers enhanced wear resistance and edge retention compared with plain steel blades, making the blade a durable option for continuous use and mixed-material cutting. Can this blade be used for thicker solid material? Yes; for thicker sections and solid stock select the coarser tooth groupings (for example 3/4 or 4/6) with a positive rake angle as advised in the specifications to increase material removal rate. How does blade width and thickness affect cutting performance? The 27 mm width and 0.90 mm thickness improve tracking and reduce lateral flex, which supports straight cuts and longer blade life in routine workshop operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a highly wear-resistant HSS M42 bimetal construction combined with variable tooth pitch for flexible, reliable cutting across a wide range of steels and profiles. Order the blade directly via Metav Werkzeuge or consult our specialists for application advice. Metal bandsaw blade 3830 x 27 x 0.90 mm HSS M42, 4–6 TPI (TECWERK) Metal bandsaw blade 3830 x 27 x 0.90 mm HSS M42 engineered for robust workshop and industrial sawing of profiles, tubes and mixed steel grades HSS M42 bimetal for high wear resistance Variable tooth pitch for versatile performance 27 mm width and 0.90 mm thickness for stability Ideal for profiles, tubes and mixed steel grades Durable cutting performance for productive workflows Built from HSS M42 bimetal, the blade offers elevated wear resistance and a long service life under continuous operation, reducing downtime and blade changes. The alloyed high-speed steel edge retains cutting geometry at elevated temperatures, which translates into consistent cutting performance when processing construction, tool and stainless steels. For production environments where blade life and repeatable cuts influence throughput, the combination of edge material and band geometry delivers measurable efficiency gains and predictable maintenance intervals. Flexible tooth geometry for different materials and tasks The variable tooth pitch provides adaptability across a spectrum of materials and cross-sections. With a nominal range of 4–6 TPI, the blade balances chip clearance and tooth engagement to prevent clogging while maintaining cutting speed. The manufacturer’s recommendations include specific pitch groupings for different tasks: finer pitches with a positive rake suit demanding high-material-removal jobs in carbon and high-speed steels, while coarse-to-fine combinations with a 0° chip angle excel in vibration-prone sawing and for thinner-walled profiles. This flexibility reduces the need to carry many specialised blades, improving workshop logistics. Application-focused design for cleaner cuts and less vibration The 27 mm width and 0.90 mm thickness provide lateral stability and straight kerf tracking, which is particularly beneficial for profile and tube cutting where oscillation can degrade edge quality. The blade’s geometry is optimised for smaller to medium wall thicknesses and offers clean results in profile, tube and solid materials. For operations that alternate between full-section cuts and thinner profiles, the blade’s balanced stiffness and tooth configuration minimise chatter and reduce rework, yielding better first-pass accuracy. Practical supply and handling suited to busy shops Supplied in a packaging unit of 5, the blade supports predictable stock turnover and simplifies procurement for workshops and small production lines. The bimetal construction lessens the frequency of replacements, while the blade’s universal tooth scheme lowers inventory complexity. When combined with Metav’s reliable supply chain and technical guidance from Emmerich, this solution is appropriate for businesses seeking durable, versatile consumables backed by consistent availability. Order TECWERK metal bandsaw blades via Metav Werkzeuge for dependable stock and practical application advice — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and procurement assistance Technical Data Article number: 2000814009NW Label: Metallsägeband 3830x27x0,90mm HSS M42 ZpZ 4-6 TECWERK Manufacturer: TECWERK Product type: Metal bandsaw blade Core data Total length: 3830 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 4–6 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth form: variable tooth pitch Recommended for profiles, tubes and mixed steel grades Suitable for vibration-prone sawing and medium/smaller wall thicknesses FAQ Which materials can this blade cut effectively? The TECWERK metal bandsaw blade (HSS M42 bimetal) is suitable for construction, tool and stainless steels, as well as many non-ferrous materials and full-section profiles where a robust high-speed steel edge is required. What does 4–6 TPI mean in practice? A 4–6 TPI range indicates a variable tooth spacing that balances chip evacuation and cutting speed; the blade is configured to perform well across mixed-section work and reduces clogging during profile and tube cutting. When is a positive rake recommended? Positive rake tooth groupings are recommended for high material-removal tasks and when machining carbon or high-speed steels, as they increase cutting aggressiveness and efficiency for heavier sections. Is the blade appropriate for vibration-prone sawing operations? Yes, the blade’s recommended pitch combinations with a 0° chip angle are particularly suited for tasks susceptible to vibration, offering improved cut stability for smaller and medium wall thickness profiles. How is the product supplied and how many blades come per pack? The blade is supplied in a packaging unit of 5, facilitating straightforward restocking and inventory planning for workshops and small production lines. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the HSS M42 bimetal construction and variable tooth pitch to ensure reliable cutting across a wide range of materials; order the TECWERK metal bandsaw blade directly via Metav Werkzeuge or ask our consultants if needed TECWERK metal bandsaw blade 3830 x 27 x 0.90 mm — HSS M42, variable tooth pitch The TECWERK metal bandsaw blade 3830 x 27 x 0.90 mm is a wear-resistant bi-metal blade designed for versatile sawing tasks in workshops and light industrial applications HSS M42 bimetal construction for long life Variable tooth pitch 3–4 TPI for versatile cuts 27 mm blade width for profile and pipe cutting 0.90 mm thickness for reduced vibration Consistent cutting performance for varied materials The HSS M42 bimetal composition offers a balance of toughness and wear resistance that delivers consistent cutting performance across mixed workloads. This blade is designed for efficient material removal in steels and non-ferrous metals, while the bi-metal joint between backing and cutting edge improves resilience under changing feeds and intermittent cuts. By selecting a blade with such a material pairing, workshop operators benefit from longer tool life and fewer blade changes, which contributes to steadier production throughput and lower process interruptions. Optimised tooth geometry for clean, stable cuts The variable tooth pitch and the specified 3–4 TPI configuration provide a compromise between chip clearance and cutting aggressiveness, making the blade suitable for a range of section sizes and wall thicknesses. Where high removal rates are required, pitches with a positive rake are recommended; for vibration-prone tasks and thin-walled profiles, a 0° rake gives smoother performance. These toothing options support both profile and pipe cuts and reduce the tendency to chatter on irregular sections, improving finish quality and reducing the need for secondary operations. Practical dimensions and workshop advantages Measuring 3830 x 27 x 0.90 mm, this bandsaw blade combines a manageable width with a slim body that helps to limit kerf loss and minimise cutting forces on smaller sections. The narrow width suits smaller and medium-walled profiles and tubes, while the modest thickness contributes to reduced vibration, which is especially beneficial on older machines or setups lacking advanced vibration damping. The product is therefore a pragmatic choice for maintenance departments and specialised fabrication shops that require a versatile blade able to handle a variety of materials without frequent retooling. Choose the TECWERK HSS M42 bandsaw blade for demanding cuts and contact Metav Werkzeuge GmbH in Emmerich for supply and specialist advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000814008NW SKU: 2000814008NW Brand: TECWERK Product type: Metal bandsaw blade Facts Overall length: 3830 mm Blade width: 27 mm Thickness: 0.90 mm Teeth per inch: 3–4 Packaging unit: 5 Special features Material: HSS M42 bimetal Toothing: variable tooth pitch Recommended use: profile and pipe cutting Application examples: normal steel, tool steel, high-speed steel, non-ferrous metals Suitable for vibration-prone sawing and medium wall thickness sections FAQ What materials can be cut with this bandsaw blade? The TECWERK metal bandsaw blade in HSS M42 quality is suitable for a wide range of materials including normal and tool steels as well as non‑ferrous metals and structural profiles. Which tooth pitch is best for pipe and profile cutting? For profile and pipe cuts, pitches with a 0° rake are recommended; the blade’s variable pitch also allows selection of finer or coarser sections as required. How does the HSS M42 bimetal construction benefit workshop use? HSS M42 bimetal offers improved wear resistance and toughness, which means fewer blade changes and better performance under mixed cutting conditions with the TECWERK bandsaw blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the blade's HSS M42 bimetal construction and variable tooth pitch to achieve reliable cuts across a wide range of materials while reducing downtime from frequent blade changes — order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. Metal band saw blade 687 x 13 x 0.51 mm HSS M42, 10–14 TPI — TECWERK bimetal A metal band saw blade 687 x 13 x 0.51 mm HSS M42, 10–14 TPI designed for versatile cutting tasks in workshops and light production, suited to profile, tube and general steel work HSS M42 bimetal for high wear resistance Variable tooth pitch 10–14 TPI for versatility Suitable for steels, stainless and non-ferrous metals Optimised for vibration-prone profile and tube cuts Precise performance across mixed materials The bimetal composition of this blade combines a high-speed steel (HSS M42) cutting edge with a flexible backing strip, delivering a balance of hardness and toughness that extends service life. The variable tooth pitch allows the blade to cut consistently through differing material qualities, from mild steel to stainless and non-ferrous metals, reducing the need for multiple blade changes. For purchasers, this means more predictable cycle times and fewer production interruptions. Longer life and lower operating costs Constructed for wear resistance, the blade maintains cutting geometry under demanding conditions, which translates into fewer replacements and lower overall tooling expenditure. The bimetal bond resists tooth breakage and edge deterioration, particularly in applications with intermittent feed or minor misalignment. In practical terms, maintenance intervals are extended and machine standstill for blade swaps is reduced, supporting smoother throughput on the production floor. Versatility for profiles, tubes and general workshop tasks With a tooth range specified at 10–14 TPI, this band saw blade is particularly effective for small- to medium-wall sections and for sections prone to vibration. The variable pitch options recommended in the technical guidance allow selection of an appropriate pitch for the workpiece: finer pitches for thinner-walled tubes and profiles, coarser pitches for solid sections. The dimensional format 687 x 13 x 0.51 mm suits band saw frames that accept this standard size, enabling a straightforward replacement strategy across compatible machines. Selection guidance and practical recommendations Choose a neutral 0° rake with pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 for vibration-prone cutting, profile and tube sections of small to medium wall thickness; opt for pitches like 3/4 and 4/6 with a positive rake when higher material removal rates are required in solid or thicker sections. For workshops without extensive tooling inventories, this blade provides a flexible baseline solution. For further specification matching or material-specific advice, Metav Werkzeuge offers application guidance to ensure the blade selection aligns with production goals. Contact Metav Werkzeuge for tailored blade selection and reliable supply from Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for application-specific advice and procurement support Technical data Article number: 2000814013NW Label: Metallsägeband 687x13x0,51mm HSS M42 ZpZ 10-14 TECWERK Manufacturer: TECWERK Product type: Metallsägeband Facts Width: 13 mm Thickness: 0.51 mm Overall length: 687 mm Teeth per inch: 10–14 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Variable tooth pitch Recommended tooth pitches: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake) Positive rake options: 3/4 and 4/6 for high cutting performance Suitable for profile and tube cuts, vibration-prone operations Application: steels, tool steel, stainless steel, non-ferrous metals, solid material, varying profile thicknesses FAQ What materials can this band saw blade cut effectively? The TECWERK metal band saw blade with HSS M42 bimetal is suitable for steels, stainless steel, tool steel and non-ferrous metals; it handles both solid stock and profiles according to the recommended tooth pitch ranges. Which tooth pitch should be selected for tube and profile cutting? For vibration-prone tube and profile cuts, choose neutral-rake pitches such as 5/8, 6/10, 8/12, 10/14 or 14/18; these settings are cited for reliable performance with the TECWERK bimetal blade. Is this blade appropriate for high metal removal rates? Yes — selecting positive-rake pitches like 3/4 or 4/6 increases cutting aggressiveness and material removal, suitable for thicker sections and solid materials when using this bimetal band saw blade. What are the key dimensions to check before fitting the blade? Verify the saw frame accepts an overall length of 687 mm, a width of 13 mm and a thickness of 0.51 mm to ensure correct fitting of the TECWERK saw band. How does the bimetal structure affect service life? The HSS M42 cutting edge bonded to a flexible backing strip improves resistance to tooth breakage and wear, extending blade life compared with standard carbon blades, particularly under intermittent loads. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS M42 bimetal construction, variable tooth pitch 14–18 teeth per inch, and the precise dimensions 687 × 13 × 0.51 mm for reliable cutting performance in mixed-material production. Order the blade directly via Metav Werkzeuge or consult the sales team for application advice. TECWERK Metal Bandsaw Blade 687 × 13 × 0.51 mm – HSS M42, variable tooth pitch 14–18 The TECWERK Metal Bandsaw Blade 687 × 13 × 0.51 mm HSS M42 is a durable bimetal saw blade designed for versatile metal cutting tasks, from profiles and tubes to tool and stainless steels in vibration-prone operations. HSS M42 bimetal for high wear resistance Variable tooth pitch 14–18 teeth per inch Size: 687 × 13 × 0.51 mm for standard bandsaws Suitable for profile, tube and thin-walled sections Consistent cutting quality across mixed materials The HSS M42 bimetal construction combines a hard cutting edge with a flexible backing, providing improved wear resistance and a long service life under continuous use. This design reduces blade fatigue during demanding shifts and maintains cutting geometry longer than simple high-speed steel blades. The result is steadier kerf widths and fewer interruptions to production. Flexibility through variable tooth pitch for tailored performance A variable tooth pitch minimises vibration and chatter when cutting different material sections. The blade offers 14–18 teeth per inch, which is particularly effective for small- to medium-section profiles and tubes. For customers working with mixed batches, this variability translates into fewer blade changes and more predictable cycle times, improving throughput on small- to mid-size workpieces. Application-specific recommendations for optimised cutting Recommended pitch options are provided for distinct tasks: pitches 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle are excellent for vibration-prone sawing and for profile and tube cuts with thinner walls. Pitches 3/4 and 4/6 with a positive rake angle support higher material removal rates for normal, tool and high-speed steels, as well as non-ferrous metals. These guidelines aid correct blade selection for defined production goals. Practical benefits for workshop and production use With dimensions of 687 × 13 × 0.51 mm, the blade fits common metal bandsaws and is supplied in a pack quantity of five, enabling quick replacement cycles. The combination of a bimetal cutting edge and variable pitch makes the blade a pragmatic choice for workshops seeking a balance of longevity and cutting versatility while keeping machine downtime to a minimum. For tailored advice on configuring TECWERK blades for specific materials or to arrange supply from Metav Werkzeuge — contact our specialists at Metav Werkzeuge, Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814014NW Manufacturer: TECWERK Product type: Metal bandsaw blade Pack quantity: 5 Specifications Total length: 687 mm Width: 13 mm Thickness: 0.51 mm Tooth pitch: 14–18 teeth per inch Materials & special features Material: HSS M42 bimetal Variable tooth pitch for mixed-material cutting Recommended pitches: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake angle) Pitches 3/4 and 4/6 with positive rake angle for high removal rates Suitable for profile cuts, tube cuts and vibration-prone sawing FAQ Which materials can this bandsaw blade cut effectively? The TECWERK metal bandsaw blade in HSS M42 quality is suitable for tool steels, construction steels, stainless steels and many non-ferrous metals, with specific tooth-pitch options optimised for different materials. How does the variable tooth pitch help in production? Variable tooth pitch reduces vibration and improves chip evacuation when cutting mixed-section workpieces; the 14–18 teeth-per-inch range is ideal for small to medium profiles and tubes. What are the recommended pitch and rake-angle combinations? Recommended options include 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle for vibration-prone and thin-walled sections; 3/4 and 4/6 with a positive rake angle for higher cutting performance. Is the blade suitable for vibration-prone sawing operations? Yes, the HSS M42 bimetal construction and variable pitch make this blade particularly suitable for vibration-prone sawing, especially for profile and tube cuts of small to medium wall thickness. What packaging is provided for supply and maintenance planning? This TECWERK metal bandsaw blade is supplied in packs of five, facilitating planned blade changes and stock management. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS M42 bimetal construction, a variable tooth pitch 10–14 TPI, and a narrow 13 mm width to ensure durable, vibration-resistant cutting of profiles and pipes; order the TECWERK metal bandsaw blade directly via Metav Werkzeuge or consult our specialists for selection support. TECWERK Metal bandsaw blade 730 x 13 x 0.51 mm — HSS M42, variable 10–14 TPI The TECWERK Metal bandsaw blade 730 x 13 x 0.51 mm is a narrow, high-performance blade designed for precision sawing of profiles, tubes and solid sections in a workshop or production setting. HSS M42 bimetal construction for durability Variable tooth pitch 10–14 TPI for versatile cutting Width 13 mm, thickness 0.51 mm for precise cuts Suitable for profiles, pipes and stainless steel Engineered for consistent cutting and long blade life The Metal bandsaw blade 730 x 13 x 0.51 mm pairs HSS M42 hardness with a bimetal bond to deliver extended service life compared with standard high-speed steels. The hardened cutting edge resists bluntness under continuous load, while the flexible backing prevents premature breakage. This combination increases uptime in mixed batches and repetitive cuts, reducing the frequency of blade changes and contributing to steadier output in small to medium production runs. The narrow geometry also supports precision in confined cutting operations. Versatile performance across common workshop materials Built for adaptability, the blade’s variable tooth pitch and M42 chemistry make it suitable for a broad spectrum of materials. The HSS M42 cutting edge maintains performance on stainless steel, tool steels and many non-ferrous metals, while the bimetal construction enhances wear resistance when encountering tougher sections or interrupted cuts. For practical workflow, use the blade for both thin-walled and solid components where consistent kerf width and predictable tool life are priorities, ensuring fewer reworks and better overall process reliability. Clear tooth-pitch guidance for the right cutting action The blade offers a 10–14 TPI banding that is part of a wider recommendation range for TECWERK bandsaw applications. Coarser and mixed pitches (for example 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle) reduce vibration and are well suited to profiles and pipes with small to medium wall thicknesses. Finer, positively raked configurations (such as 3/4 and 4/6 with positive rake) provide high cutting performance for thicker, solid materials and demanding alloys. In practice, the tooth specification balances chip clearance, feed stability and surface finish to match the intended workpiece. Practical benefits for setup and daily shop use The blade’s dimensions — 13 mm width and 0.51 mm thickness — make it a practical choice for machines tuned for narrow-kerf sawing and for operations where reduced material loss and precise edge geometry matter. The durability of the bimetal edge reduces downtime due to blade failures, while the variable pitch improves cut smoothness in heterogeneous batches. For workshops handling medium-mix, medium-volume tasks, this blade supports consistent cycle times and predictable maintenance intervals, aiding scheduling and cost control. Contact Metav Werkzeuge for tailored guidance on selecting the right TECWERK HSS M42 bimetal bandsaw blade for specific applications; technical support is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000814015NW Manufacturer: TECWERK Product type: Metal bandsaw blade Label: Metallsägeband 730x13x0,51mm HSS M42 ZpZ 10-14 TECWERK Facts Length: 730 mm Width: 13 mm Thickness: 0.51 mm Teeth per inch: 10–14 TPI Tooth pitch type: variable tooth pitch Packaging unit: 5 Special features Material: HSS M42 bimetal Recommended for profiles and pipes Suitable for stainless steel and tool steels 0° rake angle recommendations for vibration-prone sawing Positive rake options for high cutting performance FAQ What materials can this blade cut effectively? The TECWERK metal bandsaw blade is designed for a wide range of materials; its HSS M42 bimetal edge performs well on stainless steel, tool steels and many non-ferrous metals, and it is suitable for cutting profiles and pipes. What does a variable tooth pitch mean for cutting quality? Variable tooth pitch reduces resonance and chatter during sawing; the 10–14 TPI range helps to balance chip removal and finish when working with mixed-section batches and vibration-sensitive cuts. Which tooth configuration is recommended for thin-walled pipes? For thin-walled and vibration-prone operations, use coarser or mixed pitches with a 0° rake angle as recommended for profile and tube cutting; this improves stability and prolongs blade life. Is this blade suitable for solid bar cutting? Yes; selecting a finer, positively raked pitch increases cutting aggressiveness and is advised for solid materials and thicker profiles to maintain material removal rates. How should the blade be used to maximise lifetime? Sharp, correctly tensioned installation, matched feed rates and using the appropriate tooth pitch for the workpiece all extend service life; regular inspection and correct machine alignment reduce wear on the HSS M42 cutting edge. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a wear‑resistant HSS M42 bimetal construction and a variable tooth pitch that keeps cuts stable across mixed materials; the result is longer blade life and reliable performance in vibration‑prone sawing. Order or request advice via Metav Werkzeuge for a tailored supply solution. TECWERK metal bandsaw blade 730 x 13 x 0.51 mm, HSS M42, 14–18 tpi A TECWERK metal bandsaw blade engineered for versatile sawing tasks, offering high wear resistance and variable pitch for reliable performance on profiles, tubes and mixed materials HSS M42 bimetal for high wear resistance Variable tooth pitch for mixed materials 13 mm blade width for tight profile cuts Suited to vibration‑prone sawing Consistent cutting performance with HSS M42 bimetal The blade's HSS M42 bimetal construction combines a high‑performance cutting edge with a tough backing, providing superior wear resistance compared with conventional steels. This design reduces edge breakdown in continuous use, lowering replacement frequency and supporting predictable production schedules. The combination of a hardened cutting layer and a resilient body means quieter running and less heat build‑up during longer cuts, which benefits workshops that require consistent throughput and reduced downtime. Variable tooth pitch for stable, efficient sawing A variable tooth pitch prevents harmonic resonance and improves chip evacuation when working with materials of differing hardness. The 14–18 tpi range is intended for finer, controlled cuts and is particularly effective on thinner sections and small‑profile work. The blade also supports alternative toothings and rake angles: a 0° rake is recommended for vibration‑prone applications and provides stable chip control, while a positive rake increases cutting aggression for high material removal, making the blade adaptable to both delicate profiling and more demanding removal tasks. Compact dimensions that match demanding workflows With a width of 13 mm, a thickness of 0.51 mm and an overall length of 730 mm, this blade fits machines that require narrow‑kerf performance for restricted contours and internal cuts. The slim cross‑section helps access narrow profiles and inner tube cuts without excessive material waste. Supplied in packaging unit: 5, the set provides immediate availability for small production runs or maintenance spares, supporting continuous operation. Robust construction and proven tooth geometries make this a practical choice for workshops prioritising uptime and repeatable quality. For exact tooth‑pitch selection, bespoke recommendations or supply from Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specialist advice and reliable delivery from Emmerich Technical Data Article number: 2000814016NW Description: Metal bandsaw blade, HSS M42 bimetal Manufacturer: TECWERK Facts Width: 13 mm Thickness: 0.51 mm Overall length: 730 mm Tooth pitch: 14–18 tpi Packaging unit: 5 Special features Material: HSS M42 bimetal Variable tooth pitch for mixed materials Recommended toothings: 5/8, 6/10, 8/12, 10/14, 14/18 0° rake for vibration‑prone sawing Positive rake options for high material removal FAQ Which materials can this bandsaw blade cut effectively? The TECWERK metal bandsaw blade with HSS M42 bimetal is suitable for steels, tool steels and a range of non‑ferrous metals, offering good wear performance across mixed material batches. Is the blade suitable for cutting thin‑walled tubes and profiles? Yes. The 13 mm width and the variable tooth pitch make the blade well suited to profile and tube cuts of smaller to medium wall thickness, especially where reduced kerf and access are required. How does variable tooth pitch affect vibration and cut quality? Variable pitch disrupts harmonic frequencies and improves chip evacuation, which reduces vibration and results in cleaner, more consistent cuts on materials of varying hardness. What do the 14–18 tpi teeth indicate for application? The 14–18 tpi range is intended for finer, controlled cutting, ideal for thinner sections and precision profiling; coarser toothings and positive rake options are available for higher removal rates. How many blades are supplied per pack and what is the length? The product is supplied in a packaging unit of 5 and has an overall length of 730 mm, matching common machine requirements for narrow‑kerf blades. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the durable HSS M42 bimetal and variable tooth pitch to handle a wide range of metals with reduced wear and consistent cutting performance; benefit from efficient, vibration-resistant sawing for profiles and tubes and arrange supply or expert advice via Metav Werkzeuge for seamless production integration. Band Saw Blade 733 x 13 x 0.51 mm HSS M42 (10–14 TPI) – TECWERK A Band Saw Blade 733 x 13 x 0.51 mm HSS M42 (10–14 TPI) engineered for versatile metal cutting, suited to profile and tube sawing as well as demanding stainless and tool-steel applications HSS M42 bimetal construction for long life Variable tooth pitch 10–14 TPI for mixed materials 733 x 13 x 0.51 mm for small to medium saw frames Optimised for vibration-prone and profile cuts Durable cutting performance for continuous operation The HSS M42 bimetal design combines high-speed steel teeth welded to a flexible backing, delivering excellent wear resistance and a long service life in industrial use. This construction reduces tool changes and downtime, supporting a steady production flow in workshops and jobbing shops. The blade's robust composition is particularly beneficial for repetitive sawing tasks where consistent edge retention and reliability matter most. Flexible tooth geometry that adapts to material mix With a variable tooth pitch covering 10–14 TPI, the blade offers a balanced compromise between chip clearance and finish quality. Variable pitch means alternating tooth spacings to reduce harmonic vibration and improve cut stability; this is why specific pitch groups (for example 5/8, 6/10, 8/12, 10/14 and 14/18) are recommended for different workpieces. The concept of TPI (teeth per inch) indicates how many teeth engage the cut — lower TPI for thicker sections, higher TPI for finer profiles and thin-walled tubes — enabling a single blade to address diverse jobs. Stable results in vibration-prone and profile cutting The blade is optimised for vibration-prone cuts, making it well suited to small and medium wall-thickness profiles and tube sections. Certain tooth settings run with a 0° rake angle for smooth, low-vibration performance, while other pitches use a positive rake for higher cutting aggression where required. This balance reduces chatter and improves dimensional accuracy when working with structural steels, stainless grades and harder tooling steels. Ready compatibility and practical handling in workshops Sized at 733 x 13 x 0.51 mm, this band saw blade fits compact and mid-size saw frames and is an effective choice for mixed-workload environments. The variable tooth arrangement and robust bimetal composition make the blade a universal option for normal steels, tool steels, high-speed steels and non-ferrous metals, as well as solid material and thicker profiles. For users seeking a reliable all-round cutting blade, the TECWERK band saw blade provides predictable performance and straightforward integration into existing sawing setups. For procurement or technical guidance on the TECWERK band saw blade, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000814017NW Brand: TECWERK Product type: Band saw blade Label: Band saw blade 733 x 13 x 0.51 mm HSS M42 10–14 TPI Facts Length: 733 mm Width: 13 mm Thickness: 0.51 mm Teeth per inch: 10–14 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth pitch: variable tooth pitch Recommended for: profiles and tubes, stainless steels, tool steels, high-speed steels, non-ferrous metals, solid material and thicker profiles Performance notes: particularly wear-resistant; 0° rake for low-vibration cuts; positive rake for high removal rates FAQ What materials can be cut with this blade? The TECWERK band saw blade (Band saw blade 733 x 13 x 0.51 mm HSS M42) is suitable for a wide range of materials including stainless steels, tool steels, high-speed steels and non-ferrous metals, as well as profiles and solid sections. How does the variable tooth pitch affect cutting? Variable tooth pitch reduces vibration and improves cut stability; the 10–14 TPI grouping enables better chip evacuation on mixed material jobs while maintaining surface quality. Which tooth pitch should be chosen for tube and profile cutting? For profile and tube sawing with small to medium wall thickness, the 0° rake settings such as 5/8, 6/10, 8/12 or 10/14 are recommended for low vibration and smooth cutting performance. Is this blade compatible with compact saw frames? Yes, the 733 x 13 x 0.51 mm size is intended for compact and mid-size band saw machines; check machine specifications for blade length and width compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS M42 bimetal design and variable tooth pitch for reliable cutting across a wide range of materials — order directly via Metav Werkzeuge or consult the technical team for tailored recommendations. Bandsaw blade 733 x 13 x 0.51 mm, HSS M42, 14–18 TPI — TECWERK The Bandsaw blade 733 x 13 x 0.51 mm is a bi-metal bandsaw blade engineered for precision cutting of steels and non-ferrous metals in both workshop and industrial band saws. HSS M42 bimetal construction Variable tooth pitch 14–18 TPI 733 x 13 x 0.51 mm dimensions Suitable for stainless and tool steels Efficient cutting performance for mixed materials The HSS M42 bimetal construction delivers a combination of hardness and toughness that balances long life with resistance to fracture. Its weld-bonded high-speed steel teeth on a flexible backing metal enable consistent chip formation and reduced tooth breakage, which results in steadier feed rates and fewer interruptions. For production environments, this translates into higher throughput and less time spent on blade changes — a measurable improvement in operational efficiency. Tooth geometry explained and application guidance The variable tooth pitch (14–18 TPI) minimises vibration and helps maintain an even cutting action when working with profiles and tubes of smaller to medium wall thickness. Recommended pitch ranges and rake settings support different tasks: pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 paired with a 0° rake angle are ideal for vibration-prone sawing and precise profile and tube cuts, while coarser pitches with a positive rake (for example 3/4 and 4/6) increase material removal when machining thicker sections or solid stock. These guidelines aid selection for specific materials and cutting conditions. Durability and handling advantages at the bench Thanks to its bi-metal build, the blade provides enhanced resistance to wear and thermal softening during prolonged cutting cycles. The narrow 13 mm width and 0.51 mm thickness make the blade agile in tight-radius cuts while still offering sufficient stiffness for straight runs. The result is a combination of durability and manageable handling that reduces downtime and simplifies blade changes, which supports continuous production and predictable maintenance planning. Versatility across workshop and industrial uses This bandsaw blade is specified for use on construction steels, tool steels and stainless steel, and it also performs well on non-ferrous materials and solid sections. Its design suits both vibration-sensitive operations and general-purpose cutting tasks, making it a pragmatic choice for repair workshops, small series production and industrial maintenance. The blade’s dimensional stability and tooth configuration help ensure repeatable cut quality and reduced rework. For availability, specific tooth-pitch recommendations or to discuss material-specific cutting parameters for the TECWERK bandsaw blade, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for direct technical support and supply options. Technical data Article number: 2000814018NW Manufacturer: TECWERK Product type: Bandsaw blade Packaging unit: 5 Specifications Length: 733 mm Width: 13 mm Thickness: 0.51 mm Tooth pitch: 14–18 TPI Features Material: HSS M42 bimetal Variable tooth pitch, vibration-reducing design Recommended pitches: 5/8, 6/10, 8/12, 10/14, 14/18 with 0° rake for profile/tube cuts Coarser pitches (3/4, 4/6) with positive rake for high removal and thicker sections Suited to construction steel, tool steel, stainless steel, non-ferrous metals and solid profiles FAQ Is this blade suitable for stainless steel? The TECWERK bandsaw blade 733 x 13 x 0.51 mm with HSS M42 teeth is suitable for cutting stainless steel; use the variable pitch and recommended 0° rake settings for profile and tube cuts to reduce vibration. Which tooth pitch should be used for thin-walled tubes? For thin- to medium-walled tubes, pitches such as 5/8, 6/10, 8/12, 10/14 or 14/18 with a 0° rake angle are recommended to maintain cut quality and reduce chatter with the TECWERK bandsaw blade. Can the blade cut solid bars and thicker profiles? Yes, use coarser pitches (for example 3/4 or 4/6) with a positive rake on the TECWERK bi-metal blade to increase material removal when cutting solid sections and thicker profiles. How does the HSS M42 bimetal construction benefit workshop use? The HSS M42 bimetal design offers wear resistance at the tooth edge and a tough backing, resulting in longer life and fewer interruptions for blade changes during workshop or small-scale production tasks. What is included in the packaging unit? The packaging unit contains five bandsaw blades of the specified dimensions and configuration as listed in the technical data. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund