100mm 6x6mm Square Turning Bar HSS-EW9Co10 10% Coated? No Coating, Hardened 65-69 HRC, Tolerance h13, ±2 mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, finish‑ground square blank that combines consistent geometry and high wear resistance for reliable tool production; order the Wilke product directly via Metav Werkzeuge or request expert advice from our consultants. Turning blank DIN 4964 Form B — HSS‑EW9Co10, 6 x 6 mm, 100 mm (Werner Wilke) A turning blank DIN 4964 Form B designed for precision toolmaking and small-series cutter production, offering a square cross-section and finish-ground condition for dependable machining. HSS‑EW9Co10 with 10% cobalt Square cross-section 6 x 6 mm Hardened and finish‑ground, 65–69 HRC Length 100 mm, tolerance ±2 mm Predictable geometry to streamline production The square blank is supplied in a 6 x 6 mm cross-section and 100 mm length to provide a stable, repeatable starting material for toolmakers. Manufactured to DIN 4964 and Form B, the piece reduces preparation time at the lathe or tool-grinding machine because the geometry is already finish‑ground; this translates into fewer setup adjustments and more predictable final parts. The cross-section tolerance h13 and length tolerance ±2 mm ensure consistent fits in standard jigs and holders, supporting efficient batch processing and minimising scrap rates. Material and heat treatment engineered for wear resistance Made from HSS‑EW9Co10 (material number 1.3207) with a 10% cobalt content, the blank combines high‑speed steel toughness with elevated red hardness for sustained performance under thermal load. The material is hardened, tempered and finish‑ground, delivering a hardness of 65–69 HRC that supports aggressive grinding and extended tool life. For workshops that produce their own cutting edges or small rotary tools, this composition means less frequent remakes and a lower risk of premature wear during finishing, which improves overall process economy. Ready for individual tool fabrication and fast handling Ends are supplied straight and unground, allowing bespoke end finishes or direct mounting in fixtures depending on the application. The square profile simplifies orientation and clamping for indexable operations or multi‑step machining, while the finish grinding reduces the need for preliminary stock removal. These practical attributes shorten lead times for custom tools and make inventory management simpler: a compact, high‑quality blank that is straightforward to process into bespoke tooling or prototypes with minimal preliminary work. Standard conformity and workshop compatibility Compliance with DIN 4964 gives clarity for procurement and quality assurance, while the specified tolerances and hardening treatment support reliable interchangeability between batches. The combination of finish‑ground dimensions, defined tolerance h13, and clear material identification (1.3207) enables quality control checks to be performed rapidly and objectively. For production environments where traceability and repeatability matter, this blank offers a measurable basis for consistent results and easier integration into existing toolmaking workflows. For reliable supply from our Emmerich stock and expert guidance on application or batch sizing, contact Metav Werkzeuge to request the Wilke turning blank in HSS‑EW9Co10 (SKU 4118415055NW) and discuss tailored delivery options. Technical data Article number: 4118415055NW Product type: Turning blank Standard: DIN 4964 Form: B Material: HSS‑EW9Co10 Material number: 1.3207 Facts Cross-section: 6 x 6 mm Length: 100 mm Hardness: 65–69 HRC Length tolerance: +/- 2 mm Cross-section tolerance: h13 Special features Cobalt content: 10% Hardened, tempered and finish‑ground Ends straight and unground Square profile for secure clamping FAQ What material is the blank made from and what does that mean for tool life? The blank is made from HSS‑EW9Co10 (Werkstoff 1.3207) with 10% cobalt; this composition improves hot hardness and wear resistance, so the Wilke turning blank maintains cutting edge integrity during finishing and extends the useful life of the manufactured tool. What are the supplied tolerances and why are they important? Cross-section tolerance h13 and length tolerance ±2 mm are standard manufacturing tolerances intended to ensure consistent dimensions for fixture mounting and predictable downstream processing of the turning blank. How hard is the material and how does that affect processing? The blank is supplied at 65–69 HRC, a hardness suited to precision grinding and final tool preparation; this level of hardness supports high wear resistance but requires appropriate grinding wheels and process parameters. Are the ends ready for mounting or further machining? Ends are supplied straight and unground, allowing flexible finishing: they can be machined to specific tool geometries or used as supplied for certain clamping arrangements. Which standard and form does the product follow? Supplied to DIN 4964, Form B, the blank adheres to recognised dimensions and form specifications for square turning blanks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Pin Round Bar HSS-EW9Co10 65-69 HRC, h8 Diameter Tolerance - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a high-alloy high-speed steel blank that combines dependable hot-hardness, precise diameter tolerance h8, and a finish-ready condition for smooth integration into production workflows; order via Metav Werkzeuge or request tailored advice for special applications. Turning blank DIN 4964 Form A — HSS‑EW9Co10, Ø 10 mm, L 100 mm by Werner Wilke Zerspanungstechnik A turning blank DIN 4964 Form A designed as a round, hardened and finish-ground bar for precision turning and toolmaking applications HSS with 10% cobalt for increased hot hardness Hardened and finish-ground, ready for use Diameter tolerance h8 and straight ends Conforms to DIN 4964 Form A standard High‑temperature performance for sustained cutting quality The alloyed HSS‑EW9Co10 composition delivers elevated red‑hardness and wear resistance compared with standard high‑speed steels, making the blank suitable for demanding intermittent and continuous cutting tasks. With a cobalt content of 10% and a hardness of 65–69 HRC, the material retains its edge at higher temperatures and under heavy loads; this reduces the frequency of regrinding and helps maintain dimensional accuracy across runs. As a result, cycle times stay predictable and tool replacement intervals lengthen, contributing to greater operational efficiency. Consistent geometry that reduces setup time Manufactured to DIN 4964 Form A as a round blank, the component’s diameter of 10 mm and diameter tolerance h8 ensure repeatable clamping and predictable concentricity. The specified length of 100 mm with a length tolerance of +/- 2 mm simplifies fixture selection and minimises trial adjustments at the machine. Because the ends are straight and unground, the blank can be fixtured and faced without additional preparation, speeding the transition from raw material to finished part and lowering non‑productive time. Ready‑to‑use condition for reliable process control Delivered hardened, tempered and finish‑ground, the blank arrives in a state that requires minimal pre‑processing before turning operations. The combination of finish grinding and high hardness offers a stable starting point for precision workpieces, particularly where edge retention and micro‑geometry are critical. Suitable for small batches and prototype runs as well as repeat production, the blank supports quality‑centric workflows in toolmaking and precision component manufacture. If additional technical data is required or if uncertain whether this blank fits a specific machining strategy, Metav Werkzeuge can provide further specifications and guidance via email or phone: info@metav-werkzeuge.com, +49 2822 7131930. Contact Metav Werkzeuge today for bespoke guidance and to arrange supply of this WILKE turning blank (SKU 4118401098NW) from our Emmerich stock Technical data Article number: 4118401098NW Product type: Turning blank (round) Material: HSS‑EW9Co10 Standard: DIN 4964 Form A Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Diameter: 10 mm Length: 100 mm Hardness: 65–69 HRC Cobalt content: 10% Diameter tolerance: h8 Length tolerance: +/- 2 mm Material number: 1.3207 Special features Hardened, tempered and finish‑ground Ends straight and unground Round blank for turning operations Conforms to DIN 4964 Form A FAQ What materials is this blank suited to machine? The turning blank in HSS‑EW9Co10 is primarily intended for machining steels and alloyed steels where high cutting temperatures are expected; the cobalt alloy improves hot hardness and wear resistance. How precise is the diameter and length? Diameter is specified as 10 mm with tolerance h8, and length is 100 mm with a tolerance of +/- 2 mm, providing good repeatability for clamping and finishing. Is the blank ready for immediate use in turning centres? Yes. The blank is supplied hardened, tempered and finish‑ground, which minimises pre‑machining; ends are straight and unground to allow facing or chucking as required. What is the SKU and material designation for ordering? The item is listed as SKU 4118401098NW and specified in material as HSS‑EW9Co10 (material number 1.3207) for clear identification in procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Precision Square Bar 10 x 10 HSS-EW9Co10 65-69 HRC h13, +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, ground HSS‑EW9Co10 turning blank with a precise 10 × 10 mm square section and reliable length tolerance for consistent set-up and long tool life; order the blank directly via Metav Werkzeuge or consult our specialists for application advice. Turning blank DIN 4964 Form B — square 10 × 10 mm, HSS‑EW9Co10 Turning blank DIN 4964 Form B, square 10 × 10 mm is a hardened, tempered and ground steel blank designed for precision turning and toolmaking tasks in small-batch and specialist production. HSS‑EW9Co10 with 10% cobalt content Hardness 65–69 HRC for long wear Square section 10 x 10 mm, tolerance h13 Length 100 mm with ±2 mm length tolerance High-performance material for durable tooling The blank is manufactured from HSS‑EW9Co10 (Werkstoffnummer 1.3207), a high-speed steel alloy with 10% cobalt, which increases red hardness and wear resistance under demanding cutting conditions. The elevated hardness level (65–69 HRC) means the piece maintains a cutting edge when used as a tool blank or for small, precision components, reducing the need for frequent replacements and supporting uninterrupted production cycles. The material designation complies with DIN 4964, ensuring compatibility with established industrial standards. Predictable dimensions and dependable tolerances Supplied with a square 10 × 10 mm cross-section and tolerance h13, the blank offers consistent fitment in jigs, holders and collets; this reduces set-up time and tolerances stack-up during assembly. The 100 mm length with a ±2 mm length tolerance gives clear expectations for machining allowance and fixture design. Nominal tolerance classes like h13 are straightforward to interpret and provide a reliable basis for quality control in repeat production, enabling better process planning and fewer reworks. Ready-for-use finish and practical mounting benefits Delivered hardened, tempered and ground finished, the workpiece blank features straight, unground ends that simplify clamping and final machining. The ground length and square profile ensure accurate referencing for centring or locating faces, while the unground ends are left deliberately to allow bespoke end preparation or facing by the machinist. Such a finish minimises preparatory grinding and helps integrate the blank directly into toolmaking workflows, saving time in preparation for shaping, drilling or profiling operations. Application guidance and procurement considerations This turning blank is suited to precision turning, specialist tooling and small-batch production where material stability and repeatability are priorities. The 10% cobalt content and high hardness support applications with elevated heat generation during cutting. The item is supplied as a single unit (packaging unit: 1) and identified by SKU 4118415098NW, simplifying stock management. For guidance on clamping, cutting parameters or downstream finishing, consult technical documentation or contact Metav Werkzeuge for tailored recommendations—this helps ensure optimal performance and longer service life from the blank. For specialist guidance on using the DIN 4964 Form B turning blank or to request technical data, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4118415098NW Product type: Turning blank (Drehling) Standard: DIN 4964 Form: B (square) Material: HSS‑EW9Co10 (1.3207) Dimensions & tolerances Cross-section: 10 x 10 mm Length: 100 mm Cross-section tolerance: h13 Length tolerance: +/- 2 mm Hardness: 65–69 HRC Additional features Heat-treated: hardened, tempered and ground finished Ends: straight and unground Cobalt content: 10% Packaging unit: 1 SKU: 4118415098NW FAQ What does HSS‑EW9Co10 mean and why is it used for this blank? HSS‑EW9Co10 denotes a high-speed steel alloy with 10% cobalt (Werkstoffnummer 1.3207); the material used for this turning blank increases red hardness and wear resistance, making the blank suitable for toolmaking and demanding cutting conditions. Which dimensional tolerances apply to the square section and length? The square section is specified as 10 x 10 mm with tolerance h13, and the length is 100 mm with a length tolerance of ±2 mm, providing predictable fit and repeatability for fixtures and jigs. Is the blank ready for immediate machining after delivery? The blank is supplied hardened, tempered and ground finished; ends are straight and unground, allowing immediate mounting and subsequent end preparation or facing as required by the machining process. For what kinds of applications is this turning blank most suitable? The blank is ideal for precision turning, specialist tooling, small-batch production and applications where high hardness and dimensional stability are required. How is the item identified for ordering and stock control? The product is listed under SKU 4118415098NW; the single-piece packaging unit and clear material and standard markings simplify procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Rectangular Relief Turned Bar HSS-EW9Co10 65-69 HRC, h13 Cross-Section +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, cobalt-enriched high-speed steel blank that combines long-lasting edge stability with precise dimensional control; the Turning blank DIN 4964 (Form D) in HSS-EW9Co10 offers a compact 6 x 4 mm rectangular cross-section and a 100 mm length for repeatable, high-precision toolmaking—order directly via Metav Werkzeuge or request tailored advice from our consultants. Turning blank DIN 4964 (Form D) — HSS-EW9Co10, hardened to 65–69 HRC (Werner Wilke) A Turning blank DIN 4964 (Form D) designed as a rectangular HSS tool blank for precision single-point turning and small-batch tool production Solid HSS with 10% cobalt Hardened to 65–69 HRC Precise 6 x 4 mm rectangular cross-section Length 100 mm, tolerance ±2 mm Precise performance where material hardness matters Manufactured from HSS-EW9Co10 with 10% cobalt, this rectangular blank delivers improved red-hardness and wear resistance compared with standard high-speed steels. The elevated cobalt content supports stable cutting-edge retention at raised temperatures, making the blank particularly suitable for applications that demand consistent tool geometry over repeated operations. The compact 6 x 4 mm cross-section and 100 mm finished length facilitate tight clamping in toolholders and provide predictable rigidity during turning, while the 65–69 HRC hardness ensures the blank maintains form under mechanical and thermal load. Finished condition and dimensional accuracy explained Supplied hardened, tempered and finished ground, the component arrives ready for profiling and final machining; the ends are straight and unground to allow flexible clamping and final facing. Dimensional control is tight: the cross-section is made to h13 tolerance and the finished length is supplied with a ±2 mm tolerance, supporting predictable assembly and minimising downstream adjustment. The material designation corresponds to Werkstoffnummer 1.3207, which identifies its alloy composition and heat-treatment response—important information when planning tool life, reconditioning cycles or coating steps. Workshop integration, supply reliability and technical support For workshops and specialist toolrooms seeking a robust blank for turning and toolmaking, the finished condition reduces preparation time and the material choice supports longevity and consistency. Metav’s approach to supply means access to a broad range of precision products with a dependable logistics backbone and technical consultation if required. Combine the blank with appropriate holders and heat-management practices to achieve the best life expectancy; for specific mounting or application scenarios, Metav’s advisers can propose compatible tooling and reconditioning options to suit production needs. Contact Metav Werkzeuge for availability and tailored technical advice by phone +49 2822 7131930 or email info@metav-werkzeuge.com to secure suitable blanks for immediate use Technical data Article number: 4118420001NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Standard: DIN 4964 Form: D Material: HSS-EW9Co10 Key dimensions Cross-section: 6 x 4 mm Length: 100 mm Cross-section tolerance: h13 Length tolerance: ±2 mm Material & features Heat treatment: hardened, tempered and finished ground Hardness: 65–69 HRC Cobalt content: 10% Ends: straight and unground Material number: 1.3207 FAQ What is the alloy composition and why is it relevant? The Turning blank DIN 4964 (Form D) is made from HSS-EW9Co10, a high-speed steel with 10% cobalt; the cobalt increases red-hardness and wear resistance, improving edge stability under heat. Is the blank ready for final use or does it require further processing? The blank is delivered hardened, tempered and finished ground, with straight, unground ends—this reduces preparatory work, though final profiling and facing are typically required for tool-specific geometries. What tolerances can be expected for fitting and assembly? Cross-section tolerances are manufactured to h13 and the length is supplied with a ±2 mm tolerance, providing predictable dimensions for clamping and holder selection. Can the blank be reworked or reconditioned after use? Yes; the material and heat treatment allow regrinding and reconditioning. Surface finish and hardness should be considered when planning reconditioning cycles for optimal tool life. Which SKU should be referenced when ordering or enquiring? Reference Article number 4118420001NW and quote the Werner Wilke turning blank designation for clear identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Round Bar HSS-EW9Co10 10% Coated Hardened 65-69 HRC, h8 Diameter Tolerance - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of high-cobalt HSS-EW9Co10 material and 65–69 HRC hardness for extended tool life and consistent machining results; order the turning blank directly via Metav Werkzeuge or contact our consultants for technical guidance. Turning blank DIN 4964 Form A – Ø 6 mm, HSS-EW9Co10 (1.3207), L 100 mm – WILKE A Turning blank DIN 4964 Form A for precision lathe work and toolmaking, engineered for wear resistance and dimensional consistency. HSS-EW9Co10 high-cobalt alloy Hardened to 65–69 HRC Diameter tolerance h8 Ends straight and unground Durable high-cobalt steel for longer tool life and stable cutting The blank is manufactured from HSS-EW9Co10 (1.3207), a high-cobalt high-speed steel alloy that enhances hot hardness and wear resistance. With a 10% cobalt content and a final hardness of 65–69 HRC, the material sustains cutting edges at elevated temperatures and reduces flank wear in demanding turning operations. This translates into fewer regrinds, more predictable tool change intervals and improved process economy in serial production. Predictable dimensions and tolerances for repeatable machining Supplied in a Ø 6 mm diameter and 100 mm overall length with diameter tolerance h8 and a length tolerance of ±2 mm, the component ensures reproducible clamping and concentricity across batches. The combination of tight diameter control and finish grinding where specified reduces setup time and scrap rates when used as raw turned stock or for precision dowel and mandrel manufacture. Measurable tolerances support quality assurance and integration into CNC workflows. Ready-for-machining condition reduces secondary preparation Delivered hardened, tempered and finish ground, with ends straight and unground, the blank offers a balance between surface quality and ease of further machining. The DIN 4964 Form A specification signals a standardised geometry for turning blanks, permitting predictable behaviour during facing, drilling or further turning. Straight, unground ends allow for custom end-preparation or brazing, while the finish-ground body ensures concentricity and minimal runout during rotational operations. Workshop benefits and supply reliability Using this turned stock supports efficiency in toolrooms and small-batch production: the material choice and heat treatment yield longer service life, while standardised dimensions simplify fixture design. As part of a comprehensive supply chain, sourcing such blanks through an established partner reduces procurement overhead. Metav’s approach to democratising precision — combined with a broad product range and centralised logistics — helps workshops obtain consistent components without compromising on quality or delivery transparency. For high-performance turning and dependable supply, request these WILKE turning blanks via Metav Werkzeuge GmbH or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for application advice and availability. Technical data Article number: 4118401055NW Product type: Turning blank (Drehling) Material: HSS-EW9Co10 Standard: DIN 4964 Form: A Facts Diameter: 6 mm Length: 100 mm Hardness: 65–69 HRC Cobalt content: 10% Diameter tolerance: h8 Length tolerance: ±2 mm Material number: 1.3207 Special features Hardened, tempered and finish ground Ends straight and unground DIN 4964 Form A geometry Suitable as precision turned stock for toolmaking FAQ What material is used for the blank and why is it chosen? The blank is made from HSS-EW9Co10 (1.3207); the high cobalt content increases hot hardness and wear resistance, making the component suitable for sustained turning operations. What tolerances can be expected for the Ø 6 mm dimension? The diameter is manufactured to h8 tolerance, providing reliable concentricity for fixture and spindle clamping of the WILKE turned blank (SKU 4118401055NW). Is the blank delivered ready for use in precision turning setups? Yes—the blank is hardened, tempered and finish ground, offering a consistent running surface while the straight, unground ends allow for custom end-processing. Can this turned stock be used for making precision dowels or mandrels? The material properties and tight diameter control make it well suited for precision dowels, mandrels and small tooling components where wear resistance and dimensional stability are required. Which standard defines the shape and dimensions of this product? The geometry corresponds to DIN 4964 Form A, a recognised standard for turned blanks that facilitates compatibility with toolmaking processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Round Turning Bar Form A HSS-EW9Co10 10% Cobalt 65-69 HRC h8, +/-2 mm Tolerance - Werner Wilke Zerspanungstechnik GmbH
Take advantage of high wear resistance from HSS‑EW9Co10 with 10% cobalt, combined with consistent 65–69 HRC hardness and h8 diameter tolerance for dependable production runs; order the item directly via Metav Werkzeuge or ask their consultants if needed. Wilke turning blank DIN 4964 Form A — Ø 12 mm, HSS‑EW9Co10, L 100 mm A Wilke turning blank designed as round bar stock for precision turning and small-series toolmaking according to DIN 4964 Form A. HSS‑EW9Co10 with 10% cobalt Hardness 65–69 HRC for wear resistance DIN 4964 Form A round stock Diameter tolerance h8, length ±2 mm Durable alloy for longer tool life and stable machining The use of HSS‑EW9Co10 (workpiece number 1.3207) delivers a balanced combination of toughness and hot‑hardness that supports consistent cutting performance under elevated temperatures. With 10% cobalt alloying, the blank maintains cutting edge strength where pure high‑speed steels would soften, so fewer premature re‑grinds are required. This translates into less downtime and a more predictable component quality for production environments that prioritise process stability. Precision dimensions to reduce finishing work Manufactured to DIN 4964 Form A as a round bar with an Ø 12 mm nominal diameter and length 100 mm, the stock is supplied finish ground with a diameter tolerance h8 and a length tolerance of ±2 mm. The tight diameter specification reduces the need for extensive set‑up or corrective turning before machining complex geometries, helping maintain throughput. For purchasers seeking measurable assurance, the specified tolerances provide a verifiable basis for integration into existing manufacturing chains. Heat treatment and surface condition explained for non‑specialists The blank is hardened, tempered and finish ground, producing a surface and metallurgical state that is ready for subsequent turning or tool fabrication without additional heat treatment. Hardness at 65–69 HRC indicates a very hard material typically used where edge retention and abrasion resistance are priorities; in practical terms, this means the blank resists wear during high‑speed cuts and offers longer service life in cutting‑edge applications. Ends are supplied straight and unground, which is standard for blanks intended for clamping or further machining to final dimensions. Integration into workshop workflows and handling recommendations Supplied as a compact turning blank, the component is suited to small‑batch toolmaking, sample production and repair work where consistent material properties are essential. The combination of HSS‑EW9Co10 metallurgy and finish grinding simplifies downstream operations: less variation in machining forces, predictable tool wear, and stable part tolerances. For integration into automated workflows, the consistent h8 diameter tolerance supports secure clamping and repeatable indexing on chucks or collets. For reliable supply of Wilke HSS‑EW9Co10 turning blanks and application advice tailored to specific machining tasks, contact Metav Werkzeuge — their Emmerich team will assist with selection and compatibility via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4118401118NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: turning blank SKU / UID: 4118401118NW Measurements and tolerances Diameter: 12 mm Length: 100 mm Diameter tolerance: h8 Length tolerance: +/- 2 mm Hardness: 65–69 HRC Cobalt content: 10% Materials and special features Material: HSS‑EW9Co10 (1.3207) Standard: DIN 4964 Form A (round) Heat‑treated, tempered and finish ground Ends straight and unground FAQ What is the material composition of the blank? The blank is made from HSS‑EW9Co10 (material number 1.3207) containing 10% cobalt, providing enhanced hot‑hardness. What diameters and lengths are supplied? This turning stock is supplied as Ø 12 mm with a length of 100 mm and a diameter tolerance of h8. How hard is the material and what does that imply for machining? Hardness is 65–69 HRC; this high hardness level gives excellent wear resistance but requires appropriate cutting tools and parameters when machining the Wilke turning blank. Are the ends of the blank ready for immediate clamping? Ends are straight and unground, which is typical for blanks intended for clamping or further machining to final dimensions. Which standard does the blank conform to? The component conforms to DIN 4964 Form A, indicating round bar stock prepared for turning operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Square Bar 8x8mm Hardened Ground HSS-EW9Co10 65-69 HRC h13, +/-2mm Tolerance - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, temper-finished square turning blank with precise h13 cross-section tolerance and a compact 100 mm length for predictable, repeatable machining results; order directly via Metav Werkzeuge or consult the technical team for assistance. Turning blank DIN 4964 Form B — square 8 x 8 mm, HSS-EW9Co10, 100 mm (Wilke) A turning blank (DIN 4964, Form B) designed as a square bar for precision turning and small-part machining applications Hardened to 65–69 HRC Square 8 x 8 mm section h13 Material HSS‑EW9Co10, 10% cobalt Length 100 mm, ends unground Robust core for demanding turning operations The supply-grade square bar is manufactured from HSS‑EW9Co10 (material number 1.3207) and delivered hardened, tempered and finish-ground along its profile. This high-speed steel alloy, with a 10% cobalt content, increases red‑hardness and wear resistance, which translates into longer tool life under elevated cutting temperatures. For workshops producing small batches or intricate parts, the hardened condition of this workpiece blank provides a stable base material that reduces variability in subsequent turning, drilling and finishing steps. Why the heat treatment and hardness matter in practice A surface hardness of 65–69 HRC ensures dimensional stability during secondary machining and supports tight edge retention when tools are used to form or finish features. Heat treatment followed by tempering prevents brittleness while maintaining cutting performance. For engineers evaluating blank materials, this combination reduces rework rates and makes the component behaviour more predictable during high‑speed or interrupted cuts, thereby improving process reliability and cycle‑time estimates. Dimensional accuracy explained for reliable production planning The square section is specified as 8 x 8 mm with a cross‑section tolerance of h13 and a length of 100 mm; length tolerance is ±2 mm. The bar is finished along its length but has straight, unground ends, which eases clamping and reduces unnecessary material removal during set‑up. The adherence to DIN 4964 (Form B) offers compatibility with standard fixtures and collets used in toolrooms and CNC lathes, allowing smooth integration into existing production flows without custom fixturing. Practical application and handling recommendations As a compact square bar, this workpiece blank is suitable for precision turning, toolmaking blanks and prototypes where a small square cross section is required. The lack of a surface coating and the natural finish mean conventional cutting fluids and standard high‑speed turning inserts are appropriate; machinists will benefit from optimising speeds to account for the HSS‑EW9Co10 alloy’s thermal properties. When planning stock removal, consider the hardness band to select suitable cutting geometries and coolant strategies to prolong insert life. For production enquiries or to specify this Wilke turning blank with SKU 4118415078NW for immediate delivery from Metav Werkzeuge, request a quote or technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4118415078NW Label: Drehling DIN 4964 Form B quad.B.8x8mm HSS-EW9Co10 1.3207 L.100mm WILKE Product type: Turning blank (square) Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Material: HSS‑EW9Co10 Material number: 1.3207 Hardness: 65–69 HRC Cobalt content: 10% Cross-section: 8 x 8 mm Cross-section tolerance: h13 Length L: 100 mm Length tolerance: ±2 mm Special features DIN 4964 · Form B (square) Hardened, tempered and finish-ground Ends straight and unground Packaging unit: 1 FAQ What materials is this turning blank made from? The turning blank is produced from HSS‑EW9Co10 (material number 1.3207), a high‑speed steel alloy containing approximately 10% cobalt for enhanced heat resistance. Is the bar suitable for standard lathe chucks and collets? Yes; being DIN 4964 Form B with an 8 x 8 mm square section and h13 tolerance, the blank suits common square‑holding fixtures and can be clamped in many standard collet systems with appropriate adapters. How does the hardness affect machining strategy? With a hardness of 65–69 HRC, the blank requires appropriate cutting geometries and coolant use; the high hardness provides wear resistance but needs rigid set‑up and suitable carbide or ceramic tooling for efficient material removal. Are the ends ground for precision seating? The bar profile is finish‑ground along its length, but the ends are supplied straight and unground, simplifying initial fixturing while allowing the final end faces to be machined to specific tolerances if needed. Can this blank be used for prototype and small‑batch production? Yes; its compact 100 mm length and precise section make it well suited for prototyping, small runs and toolroom applications where consistent material properties and dimensional predictability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Square Turning Bar Form B HSS-EW9Co10 10% Cobalt 65-69 HRC h13 Tolerance +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, cobalt-alloy HSS composition and a precisely specified square section to ensure consistent cutting behaviour and long tool life; order the turning blank directly via Metav Werkzeuge or request tailored advice from our consultants to confirm suitability for specific turning applications. WILKE turning blank DIN 4964 Form B — square 12 x 12 mm HSS‑EW9Co10, 100 mm The WILKE turning blank is a hardened, square high‑speed steel blank designed for precision turning, toolmaking and small‑batch production in accordance with DIN 4964 Form B. HSS‑EW9Co10 with 10% cobalt Hardened to 65–69 HRC Square section 12 x 12 mm h13 Length 100 mm, ends unground Durable alloy for sustained cutting performance The blank is manufactured from HSS‑EW9Co10, a high‑speed steel alloy containing 10% cobalt, which increases hot hardness and resistance to thermal softening during interrupted cuts. This composition, combined with a final hardness of 65–69 HRC, translates into improved wear resistance and a longer service life under cyclic loads. For users machining tougher steels or performing high feed operations, the material choice reduces flank wear and maintains cutting geometry for more consistent part tolerances. Predictable fit and machining owing to defined tolerances Supplied with a 12 x 12 mm square cross section to tolerance h13 and a nominal length of 100 mm with a length tolerance of ±2 mm, the blank offers a predictable starting condition for set‑up and further processing. The ends are supplied straight and unground, which facilitates centring or clamping before final facing; the body, being hardened, tempered and finish ground, provides stable reference faces that reduce rework. As a result, cycle‑to‑cycle variation is lower and batch reproducibility is improved in jigged or fixture‑based operations. Versatile use and practical handling for workshop and production Conforming to DIN 4964 Form B, the square turning blank is suitable for toolmakers, maintenance workshops and small production lines that require reliable blanks for internal tool fabrication or custom cutters. The combination of finish grinding and the stated hardness means the blank can be machined with predictable behaviour or used as a robust starting element for specialised tooling. Where high temperature resistance is required during heavy cutting, the cobalt alloy composition reduces the need for frequent tool changes, supporting uninterrupted production runs and lower tooling overhead. For technical confirmation or to secure reliable supply of this WILKE turning blank, contact Metav Werkzeuge for expert advice and order handling — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930; Metav Werkzeuge ensures transparent processing and supply from Emmerich to your workshop. Technical data Article number: 4118415118NW Product type: Turning blank Material: HSS‑EW9Co10 Material number: 1.3207 Standard: DIN 4964 Facts Cross section: 12 x 12 mm Cross‑section tolerance: h13 Length: 100 mm Length tolerance: ±2 mm Hardness: 65–69 HRC Cobalt content: 10% Special features Form B: square Hardened, tempered and finish ground Ends straight and unground Conforms to DIN 4964 FAQ What is the primary benefit of HSS‑EW9Co10 for turning applications? The HSS‑EW9Co10 alloy in this turning blank provides enhanced hot hardness and wear resistance; the material composition helps the blank maintain cutting edge geometry during heavy or intermittent cuts. Can this square blank be used directly in fixture work without pre‑grinding the ends? The ends are supplied straight and unground, allowing for clamping or facing as required; the body is finish ground to provide stable reference surfaces for fixture set‑up. What does the tolerance h13 on the 12 x 12 mm section mean for fit‑up? Tolerance h13 indicates a defined manufacturing tolerance for the cross section that supports reproducible clamping and predictable machining allowance for further finishing operations. Is the hardness range suitable for toolmaking and small cutter production? Yes, the specified 65–69 HRC provides the hardness expected for tool blanks and supports longevity under typical toolmaking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Ø 8mm Solid Carbide Round Bar Hardened 65-69 HRC h8, DIN 4964 Form A - Werner Wilke Zerspanungstechnik GmbH
Combining HSS‑EW9Co10 material with a 65–69 HRC hardness and a precision‑ground finish delivers a wear‑resistant turning blank that supports consistent concentricity and extended service life; order the blank directly via Metav Werkzeuge or consult the Metav specialists for application advice. Wilke turning blank DIN 4964 Form A Ø 8 mm – solid turning stock, HSS‑EW9Co10, 100 mm Wilke turning blank DIN 4964 Form A Ø 8 mm is a solid round turning blank intended for precision machining and tool production, manufactured from high‑alloy high‑speed steel. HSS‑EW9Co10 with 10% cobalt for strength Hardened 65–69 HRC for wear resistance Round DIN 4964 Form A, ready for turning Diameter tolerance h8 for concentric accuracy Durable high‑alloy steel for longer tool life The blank is produced from High‑speed steel HSS‑EW9Co10, a high‑alloy tool steel containing 10% cobalt, which improves red hardness and resistance to thermal softening during machining. The elevated hardness level of 65–69 HRC provides exceptional wear resistance, meaning less frequent regrinding or replacement and more stable cutting geometries over longer production runs. For non‑specialist readers, HRC denotes the Rockwell hardness scale used for tool steels; a higher value indicates a harder, more wear‑resistant material. This combination of material and hardness is valuable where uniform performance and tool life directly influence part quality and process economy. Precision dimensions and tolerances for reliable machining Manufactured to DIN 4964 Form A, the blank is supplied as a round bar with a nominal Ø 8 mm and a total length of 100 mm, with diameter tolerance h8 and a length tolerance of ±2 mm. The precision ground finish on the length ensures improved concentricity and predictable clamping behaviour in collets and chucks. The ends are supplied straight and unground, allowing final facing or machining to suit specific fixture setups. The listed tolerances and standard ensure compatibility with industrial turning workflows and support reproducible component geometries where runout and concentricity are critical. Practical use and handling in production environments This solid turning stock is intended as a basis for producing turned parts or tool components in workshops and small‑batch production. The combination of high‑alloy HSS and the specified heat treatment provides a stable starting blank for operations that demand dimensional stability under cutting heat. When setting up, consider finishing the ends and verifying clamping diameters to exploit the h8 tolerance for best rotational accuracy. For process planning, note that the supplied condition—hardened and ground—means the blank is not intended for heavy forming but for precision turning and finishing where tool life and reproducibility matter. For tailored advice on integration into existing turning processes or for bulk enquiries, contact Metav Werkzeuge today at info@metav-werkzeuge.com or by phone on +49 2822 7131930; Metav’s specialists can recommend clamping and preparation steps to match shop requirements. Technical data Article number: 4118401078NW Product type: turning blank Material: HSS‑EW9Co10 Material number: 1.3207 Standard: DIN 4964 Form: A (round) Facts Diameter: Ø 8 mm Length: 100 mm Hardness: 65–69 HRC Diameter tolerance: h8 Length tolerance: ±2 mm Cobalt content: 10% Special features Hardened, tempered and precision ground Ends straight and unground Supplied as solid round blank No coating FAQ What is the hardness range of the Wilke turning blank (4118401078NW)? The Wilke turning blank is specified at 65–69 HRC, offering high wear resistance suitable for demanding turning applications. Which material is used for this turning stock? The blank is made from HSS‑EW9Co10 (material number 1.3207), a high‑speed steel with 10% cobalt for improved high‑temperature hardness. What are the key dimensional tolerances to expect? Diameter tolerance is h8 and length tolerance is ±2 mm, with nominal dimensions Ø 8 mm and 100 mm length, complying with DIN 4964 Form A. Are the ends ready for immediate clamping or machining? The ends are supplied straight and unground, allowing facing or finishing to suit specific clamping or tooling setups before final machining. Can Metav Werkzeuge provide advice on using this blank in production? Metav Werkzeuges’ technical team can advise on clamping, machining parameters and batch supply; contact details are provided in the product listing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Solid Carbide Turning Bar Form A Hardened 65-69 HRC, Tolerance h8 +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the combination of high‑alloy HSS with 10% cobalt and a 65–69 HRC hardness for consistent wear resistance and stable cutting performance; the Ø 10 mm diameter with h8 tolerance and a length of 200 mm ensures repeatable clamping and minimal setup time. Order the turning blank directly via Metav Werkzeuge or ask the consultants for technical clarification. Turning blank DIN 4964 Form A – Ø 10 mm, HSS‑EW9Co10 (10% Co) by Werner Wilke The Turning blank DIN 4964 Form A is a round, hardened and ground solid bar intended for precision turning operations in workshops and small‑batch production. HSS with 10% cobalt for hot hardness Hardness 65–69 HRC for long wear life Diameter tolerance h8 for repeatable fits Length 200 mm with ±2 mm tolerance Consistent cutting performance from a high‑alloy material Made from HSS‑EW9Co10, material 1.3207, this turning blank provides elevated red hardness and improved wear resistance thanks to its 10% cobalt content. The specified 65–69 HRC hardness level results from controlled heat treatment and gives the blank the ability to maintain cutting edges and dimensional stability under thermal load. For workshops and precision shops this translates into fewer premature rejections and longer service intervals for downstream tooling, supporting a more efficient production rhythm. Reliable dimensions that reduce setup time Supplied to DIN 4964 Form A as a round bar, the blank is hardened, tempered and finished ground, delivering a diameter tolerance h8 and a length tolerance of ±2 mm. These measurable tolerances mean predictable fits in collets and chucks, reduced trial turning and quicker first‑piece approval. The ends are delivered straight and unground, allowing facing to final datum during the initial operation and preserving material where needed. Clear dimensional specification simplifies inventory management and process planning on the shop floor. Practical integration for workshop and small‑series production With an overall length of 200 mm and a nominal Ø 10 mm, the bar is well suited for producing small shafts, pins and turned components where tight concentricity and repeatable diameters are required. The material is delivered without coating, leaving options open for bespoke surface treatments or specialised toolpaths. The combination of a high‑grade HSS alloy and precision finishing supports reliable results in conventional turning as well as when using modern CNC lathes for short runs, helping to bridge prototype and production environments. For precision blanks from Werner Wilke, contact Metav Werkzeuge for tailored technical advice and reliable supply from Emmerich Technical data Article number: 4118401115NW Label: Drehling DIN 4964 Form A rd.D.10mm HSS‑EW9Co10 1.3207 L.200mm WILKE Product type: Turning blank (Drehling) Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Diameter: 10 mm Length: 200 mm Hardness: 65–69 HRC Cobalt content: 10% Length tolerance: ±2 mm Diameter tolerance: h8 Material number: 1.3207 Form: DIN 4964 Form A Special features Material: HSS‑EW9Co10 Hardened, tempered and finished ground Ends straight and unground No coating FAQ What material is the blank made from? The blank is produced from HSS‑EW9Co10 (material number 1.3207), a high‑speed steel alloy with elevated cobalt for improved hot hardness. Which dimensional tolerances apply to the bar? Diameter tolerance is h8; overall length is 200 mm with a length tolerance of ±2 mm, supplied to DIN 4964 Form A specifications. Is the bar ready for immediate clamping in a collet? The blank is finished ground for diameter accuracy, but the ends are straight and unground, so facing to a reference surface is normally performed before final clamping. For which applications is this blank intended? The blank is intended for precision turning of small shafts, pins and components in workshops and small‑series production where consistent material behaviour and repeatable fits are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Rectangular Bar HSS-EW9Co10 8 x 5mm Hardened 65-69 HRC h13, +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened HSS‑EW9Co10 construction with 10% cobalt and the stable 8×5 mm rectangular cross-section with h13 tolerance for consistent tool production; order the turning blank directly via Metav Werkzeuge or consult our specialists for application advice. Turning blank DIN 4964 Form D — HSS‑EW9Co10, 8×5 mm, 160 mm The turning blank DIN 4964 Form D is a hardened, ground and tempered rectangular blank for precision toolmaking and turning applications, supplied in a 160 mm length ready for further machining. Hardened 65–69 HRC for wear resistance Rectangular Form D, cross-section 8×5 mm Ground and tempered, ends straight and unground Length 160 mm, length tolerance ±2 mm Consistent performance through material and heat treatment Manufactured from HSS‑EW9Co10 (Werkstoffnummer 1.3207) with a 10% cobalt content and a hardness of 65–69 HRC, this blank delivers high wear resistance and heat tolerance under heavy cutting conditions. The combination of high-speed steel alloying and targeted heat treatment produces a workpiece that sustains cutting edges longer and minimises premature deformation; as a result, downstream tool grinding and finishing cycles remain predictable and repeatable. The delivered state—ground and tempered—means less preparatory machining is required before tool geometry is applied, shortening lead times in production. Precision tolerances that reduce setup time and reject rate With a rectangular cross-section of 8×5 mm and a cross-section tolerance of h13, the blank supports reliable clamping and uniform material removal across batches. A length of 160 mm with a ±2 mm length tolerance ensures consistent fixturing and repeatable positioning in grinding jigs and lathes. These measurable tolerances translate into fewer adjustments during setup, reduced scrap, and faster cycle-to-cycle reproducibility. Reference to DIN 4964 signals conformity with recognised standards for turned blanks, simplifying quality documentation and acceptance in workshop environments. Practical design for efficient tool production The ends are supplied straight and unground, allowing flexible final-length decisions or customised end treatments before final grinding; this simplifies logistics for toolmakers who require specific end preparations. The combination of a rectangular Form D profile and the blank’s ready-machined surface supports immediate processing on standard tool grinders and CNC lathes. For operations prioritising throughput, the material choice and finish reduce the need for extensive preparatory operations, contributing to lower overall production time and predictable tool life. Contact Metav Werkzeuge for expert guidance on integrating Wilke turning blanks into production and to secure reliable supply from Emmerich to the workshop bench Technical Data Article number: 4118420025NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning blank (Drehling), DIN 4964 Form D Material: HSS‑EW9Co10 (1.3207) Cross-section: 8 x 5 mm Length: 160 mm Hardness: 65–69 HRC Facts Length tolerance: ±2 mm Cross-section tolerance: h13 Cobalt content: 10% Total length: 160 mm Special features Hardened, tempered and finish-ground Ends straight and unground Rectangular Form D geometry Conforms to DIN 4964 FAQ What material is used for this turning blank and what is the cobalt content? The turning blank is made from HSS‑EW9Co10 with a cobalt content of 10%, providing enhanced hot hardness and wear resistance for toolmaking tasks. What tolerances apply to the cross-section and length? Cross-section tolerance is h13 and the length tolerance is ±2 mm for the 160 mm blank (SKU 4118420025NW), ensuring consistent fixturing and predictable machining behaviour. Is the blank supplied ready for final grinding? Yes, the blank is hardened, tempered and finish-ground, which reduces the amount of preparatory work required before final tool geometry is generated. How are the ends delivered and what does that mean for processing? Ends are supplied straight and unground, allowing final length adjustments or customised end treatments to be performed according to specific production needs. To which standard does this blank conform? The blank conforms to DIN 4964, indicating standardised dimensions and manufacturing practice suitable for industrial tool production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Rectangular Round Bar D DIN 4964 HSS-EW9Co10 65-69 HRC h13, +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a robust combination of high-speed steel with 10% cobalt, hardness at 65–69 HRC and precise dimensional control for dependable tool blanks in small-series production. Order the turning blank directly via Metav Werkzeuge or ask our consultants if needed. Turning blank DIN 4964 Form D — rectangular 16 x 4 mm, HSS‑EW9Co10 (WILKE) The Turning blank DIN 4964 Form D is a hardened and finish‑ground rectangular machining blank intended for precision toolmaking and for the manufacture of cutting inserts and small turning tools in workshop environments. HSS-EW9Co10 with 10% cobalt Hardened to 65–69 HRC Rectangular 16 x 4 mm cross-section Length 160 mm, length tolerance ±2 mm Consistent cutting performance from a cobalt‑enriched high‑speed steel Made from HSS‑EW9Co10, this machining blank combines the heat resistance and wear properties typical of high‑speed steel with a 10% cobalt reinforcement, improving red hardness and edge retention during intermittent thermal loads. The specified hardness 65–69 HRC indicates a material condition suitable for holding a keen cutting geometry after profile grinding, which benefits precision toolmakers aiming for long life between re‑grinds. Conformity with DIN 4964 and the finished surface treatment reduce preparation time prior to final machining. Practical format for efficient tool fabrication and small‑batch production The rectangular 16 x 4 mm cross‑section and 160 mm length provide a standardised blank that fits typical tool holders and grinding fixtures, facilitating repeatable set‑ups. The blank format is particularly useful where form tools or single‑point cutters are produced in‑house, allowing controlled material removal and simplified clamping. The combination of a regular cross‑section and finish grinding supports predictable material behaviour during shaping and heat treatment steps. Machining readiness and dimensional reliability for workshop workflows Delivered hardened, tempered and finish‑ground, with ends straight and unground, the blank is ready for secondary operations while leaving mounting and face machining options open. Cross‑sectional tolerance h13 and a length tolerance of ±2 mm define expected dimensional variation and support reliable fixturing. The unground ends permit custom end preparation, and the indicated material number 1.3207 aids traceability and material verification during purchasing and inventory control. For precision toolmaking requirements, specify the WILKE turning blank and contact Metav Werkzeuge GmbH in Emmerich for tailored ordering and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4118420102NW Designation: Turning blank DIN 4964 Form D Material: HSS‑EW9Co10 Material number: 1.3207 Standard: DIN 4964 Facts Cross-section: 16 x 4 mm Length: 160 mm Hardness: 65–69 HRC Cobalt content: 10% Cross-section tolerance: h13 Length tolerance: ±2 mm Special features Rectangular Form D profile Hardened, tempered and finish‑ground Ends straight and unground No coating specified FAQ What is this blank best used for? This turning blank is designed as a raw form for precision toolmaking; the HSS‑EW9Co10 material and rectangular profile make it suitable for producing small cutting tools and inserts. Is the material already hardened and ready for grinding? Yes, the blank is delivered hardened, tempered and finish‑ground, which reduces preparation work before profile grinding. What tolerances can be expected for dimensioning? Cross‑sectional tolerance is h13 and length tolerance is ±2 mm according to the product specification. Are the end faces prepared for immediate mounting? The ends are supplied straight and unground, allowing custom end finishing or fixturing depending on the intended application. Can the material be re‑sharpened and re‑ground after use? The 65–69 HRC condition and HSS‑EW9Co10 composition support multiple regrinds; final tool life will depend on application and grinding practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Rectangular Turning Bar HSS-EW9Co10 10% Cobalt 65-69 HRC h13 ±2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a heat-resistant HSS-EW9Co10 alloy and a precisely controlled rectangular 12 x 8 mm cross-section to ensure consistent clamping and long service life; order directly via Metav Werkzeuge or consult our specialists for application advice. Wilke turning blank (DIN 4964 Form D) — HSS‑EW9Co10 rectangular bar, 12 x 8 mm, 160 mm The Wilke turning blank is a hardened, finished rectangular bar for reliable preparation of lathe tooling and small turned components HSS‑EW9Co10 with 10% cobalt content Rectangular section 12 x 8 mm h13 tolerance Hardened and finished, 65–69 HRC Length 160 mm, length tolerance ±2 mm Extended tool life through cobalt‑alloyed high‑speed steel The HSS‑EW9Co10 composition, containing 10% cobalt, increases red hardness and resistance to heat, which translates into longer tool life under cyclic cutting loads. In practise this means fewer tool changes and steadier production runs when working in medium to high cutting speeds. The material’s combination of toughness and wear resistance makes it suitable as a reliable raw material for small turning tools and indexable insert holders where thermal stability is required. Accurate section and tolerances reduce setup time A consistently produced rectangular section of 12 x 8 mm with h13 cross‑section tolerance and ±2 mm length tolerance minimises reworking and alignment time at the machine. The finished geometry supports repeatable clamping in standard toolholders and vises, reducing setup variance and scrap rates. The bar’s dimensional control contributes directly to process stability, especially in batch production of small turned parts. Ready‑to‑process condition for predictable machining results Delivered hardened and finished, with 65–69 HRC hardness and ends straight and unground, this turning blank arrives ready for secondary machining and precise finishing. The combination of final grinding and straight ends allows reliable reference surfaces for datum setting while leaving end faces available for bespoke facing or pre‑grinding operations. The material identification Werkstoffnummer 1.3207 provides a traceable basis for selecting cutting data and coolant strategy. Practical advantages in workshop workflows Using a standardised DIN 4964, Form D rectangular bar simplifies inventory and tooling choices across a workshop or small production line. The 160 mm nominal length and robust alloy composition reduce the frequency of emergency replacements and support scheduled maintenance intervals. Where uniformity and repeatability are priorities, this type of turning blank helps maintain throughput without compromising part quality. For technical procurement or production planning, contact Metav Werkzeuge for tailored advice and fast delivery of Wilke turning blanks; Metav’s specialists can confirm suitability for specific machines and applications. Technical data Article number: 4118420100NW Standard: DIN 4964 Material: HSS‑EW9Co10 Cross section: 12 x 8 mm Length: 160 mm Hardness: 65–69 HRC Numbers / Core technical data Cobalt content: 10% Cross‑section tolerance: h13 Length tolerance: ±2 mm Werkstoffnummer: 1.3207 Special features / Versions Form D: rectangular Hardened, tempered and finished ground Ends straight and unground Supplied as single item FAQ What applications is this turning blank suitable for? The Wilke turning blank (turning blank, SKU 4118420100NW) is intended for manufacture of small lathe tools and components that require a hardened HSS‑EW9Co10 core and stable rectangular geometry. Can the bar be used at higher cutting speeds? Yes, the cobalt‑enriched HSS‑EW9Co10 composition improves red hardness, so the turning blank performs better at elevated cutting temperatures compared with standard HSS. How precise are the dimensions out of the factory? Dimensional control is provided by the h13 cross‑section tolerance and a length tolerance of ±2 mm, ensuring repeatable clamping and predictable set‑up. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Rectangular Turning Bar HSS-EW9Co10 10% Cobalt Hardened 65-69 HRC h13 Tolerance, DIN 4964 - Werner Wilke Zerspanungstechnik GmbH
Benefit from the combination of high hardness, precise h13 tolerances and a proven cobalt-alloyed HSS for dependable tool production; order the turning blank directly via Metav Werkzeuge or consult our specialists if additional technical data is required. Turning blank DIN 4964 Form D – HSS‑EW9Co10, 25 x 12 x 160 mm (WILKE) The turning blank DIN 4964 Form D is a rectangular, hardened and finish-ground HSS bar intended for the production of precision cutting tools and small tool shanks in toolrooms and manufacturing environments HSS‑EW9Co10 with 10% cobalt Rectangular cross-section 25 x 12 mm Hardened 65–69 HRC, finish-ground Cross-section tolerance h13, length ±2 mm Durable, high-performance material that reduces tooling costs The blank is manufactured from HSS‑EW9Co10 (material number 1.3207), an alloyed high-speed steel with 10% cobalt that raises hot hardness and wear resistance compared with standard HSS. The elevated hardness (65–69 HRC) increases component life for ground cutting edges and reduces the frequency of tool regrinds, which directly lowers cost per part. For workshops producing small series or bespoke tools, this composition offers measurable savings through extended service intervals and consistent edge retention. Precise dimensions for predictable setup and minimal rework Supplied in a rectangular cross-section (25 x 12 mm) with cross-section tolerance h13 and length 160 mm ±2 mm, the workpiece keeps setups predictable and repeatable. The combination of finish-ground surfaces and defined tolerances simplifies fixture design and reduces the need for additional preparatory milling. With ends supplied straight and unground, the blank is ready for clamping or for final end preparation according to the intended application, supporting efficient machine set-up and a faster throughput in both manual and CNC toolmaking operations. Ready-to-process condition for versatile workshop applications Delivered hardened, tempered and finish-ground, the component is prepared for final shaping by grinding or fine turning rather than heavy stock removal, which suits modern toolroom workflows. The DIN 4964 Form D designation ensures conformity with established standards for rectangular tool blanks, aiding compatibility with existing toolholders and toolmaking jigs. Typical uses include production of bespoke lathe tools, form tools, small insert holders and precision tool shanks where uniform hardness and dimensional stability are essential. Practical processing notes for safe and effective use Given the high hardness rating, shaping is commonly performed by grinding and fine machining; conventional heavy cutting may induce chipping. The HSS‑EW9Co10 composition affords improved resistance to thermal softening, so appropriate coolant and abrasion-resistant grinding media extend service life. The blank is supplied per unit and marked with SKU for traceability; keep parts organised to maintain batch consistency and to support quality assurance processes in production. Contact Metav Werkzeuge today to source these WILKE turning blanks for consistent tool manufacturing — for technical clarifications send an email to info@metav-werkzeuge.com or call +49 2822 7131930 and our consultants will advise on suitability and delivery Technical data SKU: 4118420149NW Product type: Turning blank Manufacturer: Werner Wilke Zerspanungstechnik GmbH Material: HSS‑EW9Co10 Numbers Length L: 160 mm Cross-section: 25 x 12 mm Hardness: 65–69 HRC Length tolerance: ±2 mm Cross-section tolerance: h13 Material number: 1.3207 Cobalt content: 10 % Special features DIN 4964 · Form D: rectangular Hardened, tempered and finish-ground Ends straight and unground Supplied per unit FAQ What material is the blank made from and what are the benefits of that alloy? The blank is produced from HSS‑EW9Co10 (1.3207); the 10% cobalt content improves hot hardness and wear resistance, giving the turning blank superior edge retention for cutting-tool production. Is the workpiece ready for immediate toolmaking after delivery? Yes, the WILKE turning blank is hardened, tempered and finish-ground, which means it is prepared for final shaping operations such as grinding and fine machining rather than heavy stock removal. Which tolerances can be expected for cross-section and length? Cross-section tolerance is h13, and length tolerance is ±2 mm; these dimensional specifications support predictable set-up and reduce the need for corrective rework. For which applications is this rectangular blank particularly suited? The material and finish make it suitable for manufacture of precision lathe tools, small tool shanks, form tools and other cutting-tool components where stable hardness and wear resistance are required. How should the blank be processed given its hardness? Due to the 65–69 HRC hardness, recommended processing methods include grinding and fine finishing; the SKU 4118420149NW should be used for traceability and batch control during tool production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Round Bar HSS-EW9Co10 10% Cobalt Hardened 65-69 HRC Ø8mm h8, +/-2mm DIN 4964 Form A - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, high‑cobalt high‑speed steel blank that combines durability and precision for reliable production runs; its 65–69 HRC hardness and h8 diameter tolerance ensure consistent tool performance. Order the component directly via Metav Werkzeuge or consult our team for suitability and supply options. Wilke turning blank DIN 4964 Form A — HSS‑EW9Co10, Ø 8 mm, L 160 mm The Wilke turning blank DIN 4964 Form A is a hardened, tempered and finish‑ground HSS bar designed for precision turning and toolmaking in industrial workshops HSS‑EW9Co10 with 10% cobalt for toughness Hardened to 65–69 HRC, ground finish Diameter Ø 8 mm with h8 tolerance Length 160 mm, length tolerance ±2 mm Consistent material and hardness for repeatable machining results The core material, HSS‑EW9Co10, combines high‑speed steel matrix with 10% cobalt, producing increased red‑hardness and wear resistance compared with standard HSS grades. This means longer life under elevated cutting temperatures and more predictable tool performance when producing small batches or series parts. The specified 65–69 HRC hardness range indicates a fully hardened and tempered condition that resists plastic deformation during finishing operations, while the finish‑ground surface improves seating and concentricity in collets and chucks. Tight tolerances and dimensional stability that simplify setup A defined diameter tolerance h8 together with a length tolerance of ±2 mm reduces the need for additional pre‑grinding or reworking prior to tool fabrication. The Ø 8 mm diameter and 160 mm length are standard formats for many precision turning and cutting tool applications, enabling quick clamping and repeatable centring. Because the ends are delivered straight and unground, the component accommodates custom end preparations while maintaining overall dimensional integrity, which shortens machine setup time and reduces scrap rates. Clear benefits for toolmakers and precision workshops Delivered as a solid, straight bar in accordance with DIN 4964 Form A, the component supports a range of downstream processes such as toolholder turning, jig finishing and small batch production. The combination of cobalt‑enriched HSS and a finish‑ground condition enhances surface finish on final parts and lowers the frequency of tool replacement. For workshops seeking reliable feed rates and consistent edge retention, this material specification offers an economical balance between performance and longevity. Quality features that support process reliability Manufacture to the given DIN standard and the stated material number (1.3207) provides traceability and a verifiable material basis for quality control documentation. The hardened and tempered treatment, along with finish grinding, results in minimal internal stresses and improved straightness — attributes that matter when producing precision tools or accurate turned components. Clear labelling and SKU tracking facilitate inventory management and repeat ordering for production continuity. For reliable supply and tailored technical advice on the Wilke turning blank, contact Metav Werkzeuge – call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application fit and delivery options. Technical Data Article number: 4118401088NW Product: Turning blank DIN 4964 Form A Manufacturer: Werner Wilke Zerspanungstechnik GmbH Material number: 1.3207 Facts Diameter: 8 mm Length: 160 mm Hardness: 65–69 HRC Cobalt: 10% Diameter tolerance: h8 Length tolerance: ±2 mm Special features Material: HSS‑EW9Co10 Hardened, tempered and finish ground Ends straight and unground Conforms to DIN 4964 Form A FAQ What material is the turning blank made from? The turning blank is made from HSS‑EW9Co10 (material number 1.3207), a high‑speed steel grade with 10% cobalt for improved red‑hardness and wear resistance. What are the dimensional specifications and tolerances? The component is Ø 8 mm, length 160 mm, with diameter tolerance h8 and length tolerance ±2 mm as delivered for machinable stock. What hardness can be expected for this HSS bar? The blank is heat‑treated to 65–69 HRC, ensuring high wear resistance and dimensional stability for precision toolmaking. Are the ends prepared for immediate clamping? Ends are supplied straight and unground, allowing custom end preparation while maintaining overall concentricity and straightness of the bar. Is this product suitable for small series tool production? Yes; the combination of HSS‑EW9Co10, finish grinding and tight tolerances makes the Wilke turning blank (SKU 4118401088NW) suitable for precision turning, tool fabrication and small batch production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Square Turning Bar Form B HSS-EW9Co10 10% Co 65-69 HRC h13 Tolerance +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a high‑performance, HSS‑EW9Co10 square turning blank that combines exceptional wear resistance with precise dimensional control; hardened to 65–69 HRC and finished ground along the length, it supports reliable series machining. Order the turning blank directly via Metav Werkzeuge or ask our consultants if needed. WILKE square turning blank — HSS‑EW9Co10, 6 x 6 mm, L 160 mm A durable square turning blank in Form B (DIN 4964) for demanding workshop turning and precision machining. HSS‑EW9Co10 with 10% cobalt for wear resistance Hardened to 65–69 HRC for long tool life Square cross‑section 6 x 6 mm, Form B DIN 4964 Length 160 mm, tolerance L ±2 mm, cross‑section h13 Outstanding material performance for productive machining The HSS‑EW9Co10 composition, containing 10% cobalt, delivers significantly improved hot hardness and wear resistance compared with standard high‑speed steels. This enables higher cutting temperatures without rapid softening, which translates into longer service intervals and fewer unscheduled tool changes. As a result, the turning blank offers a dependable basis for series production and intensive single‑part runs where material integrity under load is decisive. Precision tolerances that simplify clamping and processing Manufactured to DIN 4964 in Form B, the bar is supplied with a 6 x 6 mm square cross‑section and length 160 mm, complying with cross‑section tolerance h13 and length tolerance ±2 mm. The body is finished ground, ensuring consistent fit in vices and chuck jaws, while the ends are straight and unground for straightforward facing or custom end preparation. These dimensional controls reduce setup time and help maintain repeatability in serial lathe operations. Practical advantages for workshops and production lines Hardening to 65–69 HRC provides a robust foundation for demanding turning, milling preparations and precision subcomponents. The combination of finished ground surfaces and a stable alloy matrix supports reliable micro‑geometries after machining, reducing rework. For toolrooms and industrial workshops seeking a balance between machinability and durability, this blank is suitable for producing high‑accuracy parts where edge retention and dimensional stability are priorities. Metav’s supply chain ensures ready availability from Emmerich for immediate integration into production schedules. Contact Metav Werkzeuge for procurement advice or to arrange delivery from our Emmerich stock — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4118415066NW Label: Drehling DIN 4964 Form B quad.B.6x6mm HSS‑EW9Co10 1.3207 L.160mm WILKE UID: 4118415066NW Facts Material: HSS‑EW9Co10 (Werkstoff 1.3207) Cross‑section: 6 x 6 mm Length: 160 mm Hardness: 65–69 HRC Cobalt content: 10% Cross‑section tolerance: h13 Length tolerance: ±2 mm Form / Standard: Form B · DIN 4964 Packaging unit: 1 Special features Hardened, tempered and finished ground Ends straight and unground Square profile, Form B No coating FAQ What material is the blank made from and why is it suitable for heavy machining? The blank is made from HSS‑EW9Co10 (material number 1.3207) and contains 10% cobalt, which provides the hot hardness and wear resistance necessary for heavy or high‑temperature machining operations. Which standards and tolerances apply to this square turning blank? Manufactured to DIN 4964 Form B, the piece has a 6 x 6 mm cross‑section with h13 tolerance and a length of 160 mm with ±2 mm tolerance, ensuring predictable fit and repeatability. How does the hardness rating affect post‑machining operations? With a hardness of 65–69 HRC, the blank retains cutting edges and resists deformation, allowing for finer finishing passes and consistent geometries after turning and milling. Is the bar ready for immediate clamping and machining? The bar is finished ground along its length for accurate clamping; the ends are straight and unground, allowing the workshop to face or prepare ends as required for specific fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Round Stock HSS-EW9Co10 10% Coated Hardened 65-69 HRC, h8 Tolerance +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, high-cobalt HSS‑EW9Co10 grade combined with precision h8 diameter tolerance and a long 200 mm length for consistent set-up and reduced rework. Procure the turning blank directly via Metav Werkzeuge for reliable supply and expert advice on workshop integration. Turning blank DIN 4964 Form A – Ø 16 mm, HSS‑EW9Co10 (1.3207) by Werner Wilke A turning blank DIN 4964 Form A made from HSS‑EW9Co10 (Werkstoff 1.3207), hardened and precision ground for use in demanding turning applications HSS‑EW9Co10 material, 10% cobalt Hardened to 65–69 HRC Precision diameter tolerance h8 DIN 4964 Form A round profile Engineered material for consistent cutting performance The blank is manufactured from HSS‑EW9Co10, a high‑speed steel grade identified as 1.3207 with 10% cobalt, offering improved red hardness and wear resistance under elevated cutting temperatures. With a specified hardness of 65–69 HRC, the component provides a durable contact surface that extends service intervals and supports predictable tool life. These material properties translate into fewer interruptions during production and a lower total cost of operation when working across medium to high‑duty turning cycles. Reliable dimensions and tolerances for predictable set-up With an external Ø 16 mm and a length of 200 mm, the round profile conforms to DIN 4964 Form A and is finished to a h8 diameter tolerance and a length tolerance of ±2 mm. The precision diameter tolerance reduces spindle and chuck adjustments, enabling faster set‑up and repeatable concentricity in serial production. Ends are supplied straight and unground, which allows flexible clamping options while the precision ground body ensures consistent concentricity when mounted for turning or subsequent machining operations. Workshop-ready finish and handling benefits The component is hardened, tempered and delivered precision ground, offering a ready‑to‑use blank that minimises pre‑processing in the machine shop. The round form and consistent hardness facilitate stable cutting behaviour and improved vibration damping during turning operations. For procurement and inventory planning, the standardised form and dimensions ease storage and selection for batch production, while the robust HSS grade supports reliable performance across typical industrial turning tasks. For Werner Wilke HSS‑EW9Co10 turning blanks, contact Metav Werkzeuge for specification matching and dependable supply direct from Emmerich; our advisors will assist with technical selection and procurement. Technical data Article number: 4118401166NW Product type: Turning blank (Drehling) Manufacturer: Werner Wilke Zerspanungstechnik GmbH Material: HSS‑EW9Co10 (Werkstoff 1.3207) Dimensions & tolerances Diameter: 16 mm Length: 200 mm Diameter tolerance: h8 Length tolerance: ±2 mm Hardness: 65–69 HRC Cobalt content: 10% Special features DIN 4964 Form A round profile Hardened, tempered and precision ground Ends straight and unground FAQ What material is the blank made from? The blank is manufactured from HSS‑EW9Co10 (material number 1.3207), containing 10% cobalt to improve high‑temperature performance. What are the dimensional specifications? The component is Ø 16 mm with a length of 200 mm, diameter tolerance h8 and length tolerance ±2 mm. What hardness can be expected from the part? The blank is hardened to 65–69 HRC, providing high wear resistance for sustained turning operations. Are the ends pre-ground? Ends are supplied straight and unground, while the main shank is precision ground for concentricity. Is this suitable for serial turning set-ups? Yes; the combination of DIN 4964 Form A, precise h8 tolerance and stable HSS‑EW9Co10 material makes it well suited for repeatable production turning tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular Bar Form D HSS-EW9Co10 65-69 HRC h13, +/-2mm Tolerance - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a high‑hardness, precision‑finished blank that combines HSS‑EW9Co10 alloy strength with strict dimensional tolerances for reliable tool production; order directly via Metav Werkzeuge or consult the sales team for application guidance. Turning blank DIN 4964, Form D – HSS‑EW9Co10, rectangular 10 x 6 mm, 200 mm A turning blank DIN 4964, Form D designed as a ready‑to‑machine tool blank for precision toolmaking and small turning operations, supplied hardened and finish‑ground for immediate use HSS‑EW9Co10 with 10% cobalt content Hardened to 65–69 HRC for wear resistance Rectangular section 10 x 6 mm, tolerance h13 Precision ground length 200 mm, length tolerance ±2 mm Reliable hardness and longer tool life for consistent production The blank is manufactured from HSS‑EW9Co10, a high‑speed steel alloy with a 10% cobalt fraction that raises red‑hardness and wear resistance. With a declared hardness of 65–69 HRC, the material sustains cutting edges under thermal and mechanical load, reducing the frequency of regrinding and tool changes. This results in steadier production cycles and lower downtime for small‑batch tool production or sample turning operations. Ready‑to‑use finish that shortens process time Delivered hardened, tempered and finish‑ground, the component arrives with straight, unground ends and a finish suitable for immediate clamping and machining. The finish‑grinding minimises preparatory work and speeds up the transfer from stock to tool blank or holder, improving throughput. The cross‑section tolerance h13 and length tolerance ±2 mm ensure predictable clamping behaviour and repeatable set‑ups on toolmaking benches and CNC lathes. Dimensional accuracy that supports precise toolmaking The rectangular 10 x 6 mm section and a total length of 200 mm make the blank compatible with standard toolholders and jigs for producing custom lathe tools or small profile cutters. The material number 1.3207 identifies the alloy grade for specification sheets and heat‑treatment records. Clear dimensional data and conformity with DIN 4964, Form D help to integrate the blank into documented production routines and quality checks. Application scope and practical machining advice The blank is intended for toolmaking and turning‑related fabrication where high hardness and edge retention are required. As a finish‑ground blank made from high‑alloy HSS, it is suitable for shaping into cutting tips or small tooling components; machining should follow standard HSS practices, using appropriate coolant and moderate feeds to preserve the heat‑treated condition. The material’s behaviour under contact loads supports intricate regrinding and profile forming for specialist cutters. Discuss material suitability or request a tailored delivery from Metav Werkzeuge; the sales team at Metav Werkzeuge can advise on application specifics and assist with order placement or technical queries Technical data SKU: 4118420070NW Product type: Turning blank (Drehling) Material: HSS‑EW9Co10 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Label: Drehling DIN 4964 Form D rechteck.B.10mmxH.6mm HSS‑EW9Co10 L.200mm WILKE Facts Length: 200 mm Cross‑section: 10 x 6 mm Hardness: 65–69 HRC Cobalt content: 10% Length tolerance: ±2 mm Cross‑section tolerance: h13 Material number: 1.3207 Special features DIN 4964, Form D specification Rectangular section, finish‑ground Hardened and tempered Ends straight and unground Supplied as a ready‑to‑machine blank FAQ What materials is this turning blank suitable for? The turning blank made from HSS‑EW9Co10 is primarily intended for toolmaking tasks where high hardness and wear resistance are needed; it is typically used to produce cutting components for machining steels and other common engineering materials. Can the blank be reprofiled or re‑ground after initial shaping? Yes, the hardened and finish‑ground condition allows controlled regrinding and reprofiling; the 65–69 HRC hardness provides excellent edge retention, while standard HSS grinding practices should be used to avoid overheating. What tolerances can be expected for fitting into holders? The blank has a cross‑section tolerance h13 and a length tolerance of ±2 mm, which gives predictable clamping and alignment for small toolholders and jigs intended for rectangular blanks. Is the blank compliant with industry standards and documentation? The product conforms to DIN 4964, Form D, and is supplied with the alloy designation 1.3207, enabling straightforward inclusion in quality documentation and production records. How can the blank be ordered or where to get more technical data? For ordering or additional technical information, refer to the SKU 4118420070NW when contacting the supplier; Metav Werkzeuge can provide application advice, delivery options and further specifications Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular Bar HSS-EW9Co10 16 x 8mm Hardened 65-69 HRC h13, +/-2mm Tolerance - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, finish‑ground rectangular bar in HSS‑EW9Co10 with 10% cobalt and a nominal cross‑section of 16 × 8 mm, offering reliable wear resistance (65–69 HRC) and consistent dimensional control (tolerance h13, length ±2 mm) for precision turning applications; order the turning bar directly via Metav Werkzeuge or ask the consultants if technical clarification is needed. Turning bar (DIN 4964 Form D) – HSS‑EW9Co10, 16×8 mm, 200 mm, Werner Wilke The turning bar (DIN 4964 Form D) is a hardened, rectangular bar stock produced in HSS‑EW9Co10 for demanding turning and toolmaking tasks where high hardness and thermal stability are essential. HSS with 10% cobalt for heat resistance Rectangular section 16 × 8 mm, DIN 4964 Form D Hardness 65–69 HRC for wear resistance Length 200 mm with h13 cross‑section tolerance Precision and material performance for consistent machining The combination of HSS‑EW9Co10 and a 10% cobalt alloy delivers elevated red hardness and improved toughness compared with conventional high‑speed steels. This material choice ensures the bar maintains cutting edge integrity and dimensional stability at higher operating temperatures, which translates into fewer tool failures and longer service intervals. The 65–69 HRC hardness rating provides a balance between wear resistance and fracture toughness, making the bar suitable for repeatable production tasks and small‑batch tool fabrication where hard, wear‑resistant blanks are required. Dimensional control that supports predictable results A rectangular profile of 16 × 8 mm with h13 cross‑section tolerance and a length of 200 mm (length tolerance ±2 mm) supports accurate setup and predictable clamping in machining fixtures. The DIN 4964 Form D designation standardises the geometry for compatibility with common chucks and holders. Finished tolerances reduce preparation time on the lathe and limit trial cuts, helping to increase first‑pass accuracy. Ends are supplied straight and unground, allowing workshop workflows to choose their preferred end preparation without masking the bar's finished body. Surface condition and heat treatment for durable blanks The blank is supplied hardened, tempered and finish‑ground, which yields a stable core and a uniform surface finish across the bar length; this minimises local stress risers and eases precision gripping. While the ends are intentionally left unground, the body’s finish grinding supports precise locating and consistent friction behaviour in collets or bespoke clamping systems. The material designation 1.3207 identifies the steel grade in recognised European standards, helping to match tooling strategies and heat‑treatment expectations in production planning. Practical benefits for workshop and production environments Using bar stock with defined hardness and tolerances reduces process variation and downstream rework. The combination of heat resistance, tight geometric tolerances and a rectangular form delivers shorter setup times, longer tool life and improved repeatability for turning operations and tool blank manufacturing. For engineers and machinists who value reliability, such blanks make it easier to plan maintenance intervals and calculate life‑cycle costs, strengthening both productivity and quality assurance in small and medium production runs. For technical advice on using this Werner Wilke turning bar (SKU 4118420110NW) in specific applications or to arrange supply through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and delivery options Technical data Article number: 4118420110NW Product type: Turning bar (Drehling) Material: HSS‑EW9Co10 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Core specifications Length L: 200 mm Cross‑section: 16 × 8 mm Hardness: 65–69 HRC Cobalt content: 10% Length tolerance: ±2 mm Cross‑section tolerance: h13 Material & features Werkstoffnummer: 1.3207 DIN 4964 · Form D: rectangular Hardened, tempered and finish‑ground Ends straight and unground FAQ What applications is this bar suitable for? The turning bar in HSS‑EW9Co10 is intended for precision turning, tool blanks and small‑batch component production where elevated hardness (65–69 HRC) and thermal stability are required; the SKU is 4118420110NW. Can the bar be used for hardened‑steel machining inserts? Yes, the high cobalt content and hardness make the material suitable as a basis for machining inserts and tool blanks that demand wear resistance and dimensional stability during finishing. How precise is the rectangular section of the bar? The cross‑section is manufactured to h13 tolerance, providing consistent 16 × 8 mm geometry suitable for predictable clamping and minimal corrective machining. Are the ends ready for immediate clamping in collets? The body is finish‑ground, but the ends are supplied straight and unground so workshops can perform preferred end preparation; the bar’s finished surfaces remain suitable for accurate locating. What standard and material designation apply to this product? The bar conforms to DIN 4964 Form D and carries the material designation 1.3207 for clear reference in production documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular Gauge Bar HSS-EW9Co10 65-69 HRC h13, +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of the HSS‑EW9Co10 material and 65–69 HRC hardness for durable tool blanks, combined with a standardised DIN 4964 Form D rectangular profile for consistent fitting; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Wilke turning blank DIN 4964 Form D — HSS‑EW9Co10, 16 x 10 x 200 mm, hardened The Wilke turning blank DIN 4964 Form D is a rectangular bar stock designed for precision turning and toolmaking tasks, offering a hardened, finish-ground body suitable for high-demand production and small-series component fabrication. HSS‑EW9Co10 with 10% cobalt Rectangular Form D profile 16 x 10 mm Hardened and precision ground 65–69 HRC Length 200 mm with +/- 2 mm tolerance Exceptional material performance for demanding tooling The combination of HSS‑EW9Co10 and a 10% cobalt content provides significantly improved red hardness and thermal stability compared with conventional high-speed steels. This means the bar stock maintains cutting-edge properties at elevated temperatures, reducing the risk of softening during regrinding or heat exposure. The high hardness 65–69 HRC ensures long tool life for die inserts, punches or small cutting edges, while the material designation and Werkstoff number 1.3207 allow clear specification for procurement and quality control. Precision geometry that eases setup and alignment Supplied in DIN 4964 Form D with a rectangular 16 x 10 mm cross-section, the blank conforms to a recognised standard that simplifies fixture design and repeatable clamping. The cross-section tolerance h13 and length tolerance +/- 2 mm support reliable fitting in fixtures and reduce the need for trial adjustments. Although the body is finish-ground for consistent section and straightness, the ends are supplied straight and unground to allow customised end preparation during final machining. Practical benefits in production and toolmaking Because the bar is hardened, tempered and finish-ground, it shortens the preparation time required before machining or heat treatment steps, enabling faster throughput for prototyping and small-batch runs. The robust material and surface condition make the blank especially suitable where wear resistance and edge retention matter, such as in forming tools, gauge components or cutting-edge inserts. The standardised format also simplifies stock management across multiple projects. Handling, machining and post-processing guidance The unground ends permit direct mounting or final face preparation as required by the workpiece. For optimal results, light dressing of clamping faces and precision finishing of mating surfaces is recommended before final heat treatments or coating. Due to the high hardness, adopt grinding and cutting parameters suited to cobalt-bearing high-speed steels and ensure adequate coolant and wheel selection to avoid thermal damage during shaping. Storage in dry conditions will preserve the ground finish and dimensional stability. Contact Metav Werkzeuge for tailored supply, delivery options and technical advice on integrating this Wilke turning blank into production workflows Technical data Article number: 4118420130NW Standard: DIN 4964 Form: D Material: HSS‑EW9Co10 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Facts Length L: 200 mm Cross-section: 16 x 10 mm Cross-section tolerance: h13 Length tolerance: +/- 2 mm Hardness: 65–69 HRC Cobalt content: 10% Werkstoff number: 1.3207 Special features Hardened, tempered and finish-ground body Ends straight and unground Rectangular profile for turning and tool blanks Conforms to DIN 4964 Form D FAQ What materials is this turning blank suitable for machining into tools and inserts? The Wilke turning blank (HSS‑EW9Co10) is intended for use when creating wear-resistant tool components from high-speed steel; its 10% cobalt content and 65–69 HRC hardness suit operations where edge retention under heat is required. Are the ends ready for immediate clamping in a chuck or vice? The body of the turning blank is finish-ground, but the ends are supplied straight and unground to allow bespoke end machining; final face preparation is recommended before precision clamping. How precise is the cross-section and what fit can be expected? Cross-section tolerance h13 provides predictable dimensions for fixture design; the length is 200 mm with a +/- 2 mm tolerance, suitable for standard tooling jigs and small-series production. Does the product comply with a recognised standard for interchangeability? Yes, the bar stock adheres to DIN 4964 Form D, ensuring compatibility with fixtures and processes that reference this standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular HSS-EW9Co10 Bar 10 x 5 h13, Hardened 65-69 HRC, +/-2mm - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a robust combination of HSS-EW9Co10 material and precise geometry for dependable turning performance; order the matching turning blank via Metav Werkzeuge or contact their consultants for application advice. WILKE Turning Blank DIN 4964 Form D — HSS-EW9Co10, rectangular 10 x 5 mm, 200 mm A WILKE Turning Blank DIN 4964 Form D designed for precision turning and toolmaking, offering high hardness and stable dimensions for consistent machining results High-speed steel with 10% cobalt Hardened to 65–69 HRC Rectangular cross-section 10 x 5 mm Length 200 mm, tolerance ±2 mm Exceptional material performance for longer tool life The blank is made from HSS-EW9Co10 (1.3207), a high-speed steel alloy with 10% cobalt, combining elevated red hardness and improved wear resistance. This material choice increases resistance to heat and abrasion during interrupted cuts and continuous operations alike, therefore improving tool life and process reliability. The high hardness level of 65–69 HRC ensures the blank maintains geometry under load, which translates into fewer regrinds and predictable component tolerances. Consistent geometry and surface quality for predictable results Manufactured to DIN 4964 Form D, the workpiece features a rectangular 10 x 5 mm cross-section with h13 dimensional tolerance and a length of 200 mm with ±2 mm length tolerance. The bar is hardened, tempered and finish ground, providing a stable reference surface for clamping and machining. Ends are straight and left unground, which eases identification and handling while the ground body ensures concentricity and repeatable set-up in collets and chucks, reducing set-up time and scrap rates. Integration into production: reliability and handling benefits Suppliers and workshop planners will appreciate the blank's standardised format for batch operations and small-series work. The combination of precise tolerances and high hardness supports efficient cutting parameters and consistent cycle times, contributing to a better cost-benefit ratio per part produced. Packaged singly and traceable via SKU, the component suits both in-house toolroom regrinds and direct use as a turning blank in serial production, backed by a dependable supply chain filter in Europe. Contact Metav Werkzeuge for procurement and technical advice on this WILKE turning blank; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4118420040NW Product type: Turning blank Standard: DIN 4964 Material: HSS-EW9Co10 Material number: 1.3207 Facts Hardness: 65–69 HRC Length L: 200 mm Cross-section: 10 x 5 mm Cross-section tolerance: h13 Length tolerance: ±2 mm Cobalt content: 10% Special features Form D: rectangular Hardened, tempered and finish ground Ends straight and unground Querschnitt-Toleranz: h13; Längentoleranz: ±2 mm FAQ What material is the blank made from? The turning blank is produced from HSS-EW9Co10 (1.3207), a high-speed steel grade with 10% cobalt for improved wear and heat resistance. Is the blank suitable for hard turning or heat-resistant operations? With a hardness of 65–69 HRC, the WILKE turning blank performs well in demanding operations where sustained cutting temperatures occur, offering stability and reduced wear. What tolerances and finish can be expected? The product conforms to DIN 4964 Form D with a 10 x 5 mm cross-section, h13 tolerance and ±2 mm length tolerance; the body is finish ground while the ends are straight and unground. Which SKU should be ordered for this turning blank? Refer to SKU 4118420040NW when ordering the WILKE turning blank to ensure the correct specification and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular HSS-EW9Co10 Bar 12x6 h13 +/-2mm Hardened 65-69 HRC DIN 4964 Form D - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a high-strength HSS-EW9Co10 construction with 10% cobalt and a precise 12 x 6 mm rectangular profile to ensure consistent tool blanks for in-house grinding and finishing; order the turning blank directly via Metav Werkzeuge or consult the Metav team for technical guidance. Turning blank DIN 4964, Form D – 12 x 6 mm HSS‑EW9Co10 (200 mm) by Werner Wilke A high‑alloy tool blank intended for producing precision lathe tooling and toolholders, supplied in a hardened, tempered and finish‑ground condition for reliable edge preparation HSS‑EW9Co10 with 10% cobalt Hardened and finish‑ground, 65–69 HRC Rectangular Form D profile to DIN 4964 Cross‑section 12 x 6 mm, tolerance h13 Length 200 mm, length tolerance ±2 mm Consistent performance from high‑alloy construction The HSS‑EW9Co10 composition combines high‑speed steel with 10% cobalt, providing increased red hardness and improved thermal stability compared with standard high‑speed steels. This metallurgical mix translates into enhanced wear resistance and longer life for machined cutting edges when the blank is ground to final geometry. With a certified hardness of 65–69 HRC, the blank offers dimensional stability during subsequent tool manufacture and resharpening operations, reducing the frequency of rework and ensuring predictable tool behaviour under elevated cutting temperatures. Precision profile and tolerances for reliable toolmaking Conforming to DIN 4964 in Form D means the rectangular profile is suitable for standardised tool designs and fixtures. The 12 x 6 mm cross‑section with h13 tolerance provides a clear reference for clamping and holder compatibility, while the overall 200 mm length and ±2 mm length tolerance allow efficient batch processing and reproducible setups. Because the bar is supplied finish‑ground, the body benefits from accurate dimensions to minimise secondary machining; the straight, unground ends allow final positioning or custom end machining without compromising the finished centre section. Workshop efficiency through ready‑to‑process blanks Delivered as a single‑piece unit, the blank is hardened, tempered and finish‑ground to support rapid conversion into finished cutting or forming tools. The material designation 1.3207 identifies the substrate for heat‑treat and grinding specialists, enabling predictable material removal rates and surface quality when using standard tool‑grinding wheels and coolant practices. The combination of finish grinding and consistent alloy content reduces set‑up time, supports repeatable results and contributes to a smoother in‑house production flow for toolrooms and small series manufacturing. Contact Metav Werkzeuge for tailored advice, current stock information and assistance with matching holders or grinding specifications via info@metav-werkzeuge.com or +49 2822 7131930, or request further technical details from the Metav team at Emmerich Technical data Article number: 4118420080NW Label: Drehling DIN 4964 Form D rechteck, 12 x 6 mm, HSS‑EW9Co10, L 200 mm Material: HSS‑EW9Co10 Werkstoff number: 1.3207 Facts Hardness: 65–69 HRC Length: 200 mm Cross‑section: 12 x 6 mm Cross‑section tolerance: h13 Length tolerance: ±2 mm Special features DIN 4964 Form D: rectangular profile Hardened, tempered and finish‑ground Ends straight and unground Cobalt content: 10% Packaging unit: 1 FAQ What material is the blank made from and what benefits does it bring? The blank is manufactured from HSS‑EW9Co10, a high‑speed steel with 10% cobalt; this alloy improves red hardness and wear resistance, making the turning blank suitable for producing durable cutting tools. Which dimensions and tolerances are supplied? The bar has a 12 x 6 mm rectangular cross‑section with h13 tolerance and an overall length of 200 mm with a length tolerance of ±2 mm; these specifications correspond to the DIN 4964 Form D designation. Is the bar ready for immediate tool production? Yes. The Werner Wilke turning blank is hardened, tempered and finish‑ground so the body is dimensionally stable for grinding final geometries; the straight, unground ends allow custom end machining if required. How is the product supplied and under which SKU? The item is supplied individually (packaging unit 1) and is listed under SKU 4118420080NW for order and inventory handling. For which applications is this blank intended? Designed as a tool blank for toolrooms and small‑series production, the blank is tailored for manufacture of turning tools, holders and specialised cutting edges where alloy stability and high hardness are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular HSS-EW9Co10 Ground Bar 20 x 12mm 65-69 HRC, h13 Tolerance - Werner Wilke Zerspanungstechnik GmbH
Benefit from the combination of high material strength and precision tolerances for dependable, long-run machining. Order the turning bar directly via Metav Werkzeuge or ask our consultants for application-specific advice. Turning bar DIN 4964 Form D – HSS‑EW9Co10, rectangular 20 × 12 × 200 mm (Wilke) A turning bar DIN 4964 Form D designed as a rectangular blank for precision external turning and finishing work in demanding production environments HSS with 10% cobalt for extended tool life Hardened and precision ground to 65–69 HRC Rectangular 20 × 12 mm cross-section, L 200 mm Consistent high-performance cutting life The blank is manufactured from HSS‑EW9Co10, a high-speed steel alloy containing 10% cobalt, which significantly improves red‑hardness and wear resistance under elevated temperatures. As a result, fewer tool changes are required and cycle times remain stable during high‑power turning operations. This technical advantage translates into measurable efficiency gains in continuous production. Precision tolerances that reduce setup and rework Supplied with a 20 × 12 mm rectangular profile and an overall length of 200 mm, the material is finished to strict dimensional standards: cross‑section tolerance h13 and length tolerance ±2 mm. The blank is hardened and finish‑ground to 65–69 HRC, providing a stable reference for setting and repeatability. Such specifications reduce trial cuts and alignment time, improving first‑off accuracy on lathes and machining centres. Standardised form for predictable integration Produced to DIN 4964 Form D, the rectangular geometry and straight, unground ends make the blank compatible with standard tooling and clamping fixtures designed for this norm. The combination of standard form and a finish‑ground body ensures consistent seating and reduced runout in toolholders, supporting predictable surface finish and tool life in serial manufacture. Traceable quality and supply reassurance The blank is identified by the SKU 4118420145NW and the material designation 1.3207, with process controls documented during hardening and grinding. The finished condition—hardened, tempered and ground—signals readiness for immediate use in precision turning operations. Metav’s supply chain model adds a further layer of quality assurance, offering stable availability and a European quality filter for workshop procurement. Contact Metav Werkzeuge for tailored technical guidance and to arrange supply of the Wilke turning bar through our Emmerich team – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4118420145NW Manufacturer: Werner Wilke Zerspanungstechnik GmbH Product type: Turning bar (Drehling) Material: HSS‑EW9Co10 Material number: 1.3207 Facts Length: 200 mm Cross-section: 20 × 12 mm Hardness: 65–69 HRC Cobalt content: 10% Length tolerance: ±2 mm Cross-section tolerance: h13 Special features DIN 4964 Form D Rectangular profile Hardened, tempered and finish‑ground Ends straight and unground FAQ What material is the blank made from? The blank is made from HSS‑EW9Co10, a high‑speed steel alloy with 10% cobalt, supplied by Werner Wilke Zerspanungstechnik GmbH (SKU 4118420145NW). What are the exact dimensions and tolerances? Dimensions are 20 × 12 mm cross‑section and 200 mm length; cross‑section tolerance h13, length tolerance ±2 mm. What hardness does the finished bar have? The finished condition is 65–69 HRC, indicating a hard, ground state suitable as a machining blank for precision tools. Which standard and form does the profile follow? The profile conforms to DIN 4964 Form D, offering compatibility with fixtures and holders designed for this standard. Are the ends machined or left raw? The ends are straight and unground, intended for secure clamping; the body is finish‑ground and ready for setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Rectangular HSS-EW9Co10 Ground Hardened Bar 20 x 5 h13, 65-69 HRC - Werner Wilke Zerspanungstechnik GmbH
Take advantage of a hardened, ground HSS stock with a precise rectangular cross-section for consistent clamping and predictable machining performance; the HSS‑EW9Co10 composition with 10% cobalt and a 65–69 HRC hardness ensures thermal stability and extended tool life, while the 20 × 5 mm section and ±2 mm length tolerance support reliable set-ups — order the turning blank directly via Metav Werkzeuge or consult the specialists if clarification is required. Rectangular turning blank, Form D — HSS‑EW9Co10, 20 × 5 × 200 mm (WILKE) The rectangular turning blank Form D is a hardened and finish‑ground HSS stock compliant with DIN 4964, intended for precision toolmaking and workshop turning applications with a 20 × 5 mm cross‑section and a 200 mm length Hardened and ground, 65–69 HRC Rectangular cross-section 20 × 5 mm High-speed steel HSS‑EW9Co10, 10% cobalt Dimensional tolerance h13, length ±2 mm Predictable geometry for precise tool blanks The blank is supplied as a rectangular turning bar manufactured to DIN 4964 Form D, offering a consistently machined cross‑section of 20 × 5 mm and a nominal length of 200 mm. The controlled h13 cross‑section tolerance together with the ±2 mm length tolerance minimises set‑up variability when mounting or indexing the stock in fixtures. These characteristics translate into shorter preparation times and reproducible machining results when producing custom cutting tools, single‑point profiles or small components from a uniform HSS base. The straight, unground ends facilitate quick clamping without unexpected misalignment, supporting efficient workflows in small and medium toolrooms. Material composition for stability under heat and wear Made from HSS‑EW9Co10 (high‑speed steel with 10% cobalt) and hardened to 65–69 HRC, the material combines elevated red hardness with enhanced wear resistance. The cobalt alloying improves hot hardness, which helps maintain edge and surface integrity during finishing passes and when cutting at raised temperatures. For operations where thermal stability and a long service interval are required, this grade reduces frequency of regrinds and component rejection, delivering a measurable benefit to process reliability and total cost of ownership. The finish‑ground condition ensures a consistent surface for subsequent profiling or grinding steps. Seamless use in toolmaking and workshop production Supplied as a single unit and finished for immediate processing, the blank is suitable as a raw form for producing profiles, tool bits and turned parts where a rectangular HSS substrate is required. The combination of Form D geometry and the finish quality supports straightforward indexing, safe clamping and predictable material removal during tool grinding or single‑point turning. Shops that standardise on repeatable blanks benefit from reduced inspection cycles and faster downstream machining. For specification checks or bespoke requirements, Metav Werkzeuge can advise on compatibility with existing fixtures and recommend suitable quantities for workshop stock. For expert advice on integrating this HSS‑EW9Co10 rectangular turning blank into production, or to secure immediate supply from Metav Werkzeuge’s Emmerich facility, contact Metav Werkzeuge for tailored guidance and reliable delivery Technical data Article number: 4118420133NW Product type: Rectangular turning blank (Form D) Material: HSS‑EW9Co10 Material number: 1.3207 Standard: DIN 4964 Manufacturer: Werner Wilke Zerspanungstechnik GmbH Dimensions & measurable data Cross-section: 20 × 5 mm Length: 200 mm Hardness: 65–69 HRC Cobalt content: 10% Cross-section tolerance: h13 Length tolerance: ±2 mm Features & finish Hardened, tempered and finish ground Ends straight and unground Rectangular Form D geometry Packaging unit: 1 FAQ What material is the blank made from and what does that mean for machining? The turning blank is manufactured from HSS‑EW9Co10, a high‑speed steel with 10% cobalt; this composition provides improved hot hardness and wear resistance compared with standard HSS, making it well suited to finishing operations and longer tool life. What are the exact dimensions and tolerances of the stock? The blank has a cross‑section of 20 × 5 mm and a nominal length of 200 mm; dimensional tolerances are h13 for the cross‑section and ±2 mm for the length. Is the blank supplied ready for grinding and profiling? Yes, the piece is hardened, tempered and finish‑ground, with straight, unground ends to allow quick clamping and efficient subsequent profiling or grinding processes. Can this HSS grade be used for cutters intended to work at high cutting temperatures? The 10% cobalt content in HSS‑EW9Co10 increases resistance to softening at elevated temperatures, so the material is a suitable basis for tools and cutters that encounter higher thermal loads. What standard and form does the blank conform to? The product complies with DIN 4964 and is supplied in Form D rectangular geometry, which is a recognised specification for turning blanks used in toolmaking and workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com