15mm Centre Point Slim Extended Live Centre MK3 60° 0.008mm Runout 7000min⁻¹ 340kg Capacity 34mm Body - RÖHM
The combination of precise runout control and an extended tip offers dependable support for long, slender turnings while maintaining high surface quality and operational safety; Order the (Slim live centre MK3 with extended tip, RÖHM) directly via (Metav Werkzeuge) or ask our consultants if needed. Slim live centre MK3 (extended tip) – 60° precision point, Morse taper 3, RÖHM Slim live centre MK3 (RÖHM) delivers concentrated, deep-reaching support for turning applications where access and concentricity are critical. Extended tip for deep support 60° precision point for concentric seating Morse taper 3 spindle interface Runout ≤ 0.008 mm for high accuracy Improve turning accuracy with low runout and high rotational capacity The Slim live centre MK3 is designed to raise process reliability by combining a runout tolerance of 0.008 mm with a rated rotational speed of 7,000 rpm. This combination reduces wobble and vibration at speed, which in turn improves repeatability and surface finish when turning slender components. In practice, a low runout value translates into less rework, fewer rejects and a clearer path to consistent concentricity across production batches. For workshops focusing on precision turning, these measurable performance parameters underpin machining stability and predictable outcomes. Reach deeper into components with a slim projection and precise tip geometry The extended tip and slim body enable support of long or narrow workpieces without obstructing tool access. With a projection of 74 mm, a tip length of 32 mm and a centred point diameter of Ø15 mm, the centre provides a secure seat for axially long parts while the 60° point ensures correct centring in standard lathe centres. The Morse taper 3 mounting assures compatibility with common lathe tailstocks and adapters, while the shaft diameter of 23.825 mm offers a stable fit. These dimensions allow machinists to maintain rigidity close to the workpiece, reducing deflection and improving dimensional control on delicate geometries. Integrate smoothly into workshop workflows for robust, repeatable results Built for everyday use in industrial and small-batch environments, the centre’s body diameter of 34 mm and moderate mass (approx. 0.46 kg) make it easy to handle and fit without adding unnecessary inertia to the tailstock assembly. With a rated static support of 340 kg for the workpiece, the design balances capacity and precision, making it suitable for a wide spectrum of turning tasks where controlled support is required rather than heavy-duty bearing loads. The component’s characteristics favour quick changeover and predictable performance, supporting leaner setups and shorter cycle times while preserving part quality. For tailored advice on spindle compatibility or to place an order with Metav Werkzeuge, request a technical consultation with our specialists who will confirm fitment and delivery options. Technical data Article number: 4000832085NW Brand: RÖHM Product type: Live centre Core specifications Tip diameter: 15 mm Tip angle: 60° Projection: 74 mm Tip length: 32 mm Body diameter: 34 mm Shaft execution: Morse taper 3 (MK3) Shaft diameter: 23.825 mm Max rotational speed: 7,000 rpm Max workpiece weight: 340 kg Max runout: 0.008 mm Weight: 0.46 kg Features Slim extended running tip for deep support Precision point for concentric seating Suitable for standard MT3 tailstocks Compact body for improved access SKU for ordering and reference: 4000832085NW FAQ Is this centre compatible with MT3 tailstocks? The Slim live centre MK3 uses a Morse taper 3 shaft execution, so it is compatible with standard MT3 tailstocks and adapters. What rotational speeds are permissible with this live centre? This live centre is rated for up to 7,000 rpm under the specified runout and loading conditions. How much axial support can the centre provide? The centre is specified with a maximum supported workpiece weight of 340 kg for static support situations. What concentricity can be expected when mounted correctly? When mounted and run in under correct conditions, the device offers a maximum runout of 0.008 mm, enabling high repeatability and improved surface finish. Which part dimensions help with deep-turning applications? A projection of 74 mm combined with a 32 mm tip length and a slim tip diameter of Ø15 mm enables access into narrow and long workpieces while maintaining support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Centre Point Slim MK3 With 60° Tip, Max 7000 min⁻¹; 0.005mm Runout - RÖHM
Take advantage of the combination of high rotational capability, minimal runout and a slim profile for interference-free turning. Benefit from a secure Morse taper MT3 fit and robust centring performance at speeds up to 7,000 min⁻¹ — order directly via Metav Werkzeuge or consult the Metav team for application support. RÖHM Slim Centre MK3 — 60° 15 mm, MT3 The RÖHM Slim Centre MK3 is a slim lathe centre designed to provide precise axial locating and reliable support for turning and finishing tasks on a wide range of workpieces. 60° conical point for standard centring Runout ≤ 0.005 mm for high repeatability Supports workpieces up to 400 kg Morse taper MT3 shank for secure fit Precise centring for repeatable turning accuracy The slim centre delivers measurable precision thanks to a runout ≤ 0.005 mm, which reduces eccentricity and improves part consistency across batches. With a 60° point angle and a defined 15 mm tip form, the component provides stable bearing contact for axial locating; the result is improved repeatability and fewer scrap parts. For production environments where dimensional conformity matters, the combination of low runout and a compact tip geometry supports tight tolerances without complex setup. Secure mounting and fast spindle capability for efficient workflows Fitting into a Morse taper MT3 socket, the centre offers an industry-standard connection that ensures concentricity and easy exchangeability. The unit is rated to a max. speed of 7,000 min⁻¹, enabling higher throughput on suitable machines while maintaining stability. The specified shaft diameter of 23.825 mm and a compact 34 mm housing allow straightforward installation in common toolholders and adaptors, keeping machine downtime to a minimum and supporting streamlined changeovers. Slim design that reduces interference and simplifies handling The slim housing and short point length of 18 mm minimise obstruction around the workpiece, improving accessibility for cutting tools and coolant flow. Weighing 0.4 kg, the centre is easy to handle and position yet solid enough to offer dependable support during turning operations. The compact profile is particularly advantageous for tasks on small-diameter or closely spaced features, where space is limited but centring precision remains essential. Built for medium-duty workpieces and diverse turning tasks Designed for a maximum supported workpiece mass of 400 kg, this centre is suitable for a range of medium-duty turning applications, from component finishing to pre-machining support. The specified housing diameter 34 mm and the slim tip geometry work together to maintain alignment under load, while the reliable mechanical design helps reduce the need for frequent adjustments. For shops seeking a robust, easy-to-fit centring solution, the product offers a pragmatic balance of capacity and precision. Contact Metav Werkzeuge for tailored application advice and to arrange procurement of the RÖHM Slim Centre MK3 with MT3 shank; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support Technical Data Article number: 4000832076NW Manufacturer: RÖHM Product type: Centring point Type: Slim Shaft design: MK3 Packaging unit: 1 Core specifications Diameter: 15 mm Shaft diameter: 23.825 mm Overhang (projection): 62 mm Weight: 0.4 kg Tip angle: 60° Max. speed: 7,000 min⁻¹ Max. workpiece weight: 400 kg Runout max.: 0.005 mm Housing diameter: 34 mm Point length: 18 mm Special features Morse taper MT3 shank Slim profile for reduced interference 60° conical point for standard centring Robust centring performance for medium-duty turning Compact, easy-to-handle design FAQ What taper does this centre use and how secure is the fit? The RÖHM Slim Centre MK3 employs a Morse taper MT3 shank for a secure mechanical fit; the standard taper ensures reliable concentric retention in MT3 sockets and common adaptors. What rotational speed and load limits apply to the centre? Rated maximum speed is 7,000 min⁻¹ and the centring point supports workpiece masses up to 400 kg, providing appropriate performance for many medium-duty turning tasks. How precise is the centring performance in practical terms? The unit is specified with a runout max. of 0.005 mm, a tolerance level that contributes to consistent part geometry and reduced rework in serial production. Which features reduce interference with cutting tools during operations? The slim housing, 34 mm housing diameter and 18 mm point length minimise obstruction around the work area, improving tool access and coolant delivery during machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Block Jaw Set Unstepped Unhardened 3-Piece, For Chuck Ø160mm - RÖHM
Benefit from precise and reliable clamping with a three-piece, unstepped design that fits a 160 mm chuck and delivers consistent contact for repeatable machining. Order the set directly via Metav Werkzeuge or consult our specialists for compatibility advice. Block jaw set for 160 mm chuck (3-piece) — RÖHM A block jaw set engineered for secure external clamping on chucks with a 160 mm diameter, designed as an unstepped, unground three-piece set for stable seating and straightforward exchange. Set of 3 unstepped block jaws For 160 mm chuck diameter Precision fit by RÖHM Secure clamping for repeatable results The three-piece set provides an even distribution of clamping forces across the workpiece, reducing the risk of distortion during turning operations. Its unstepped design allows full jaw contact on cylindrical or slightly contoured surfaces, which improves concentricity and reduces the need for frequent rework. This specification supports efficient work cycles in medium-duty lathe applications, enabling processors to maintain machining tolerances without additional adjustments. Fast changeover and clear compatibility Supplied as a compact set, the jaws are matched for use with a 160 mm chuck, simplifying inventory and setup. The uniform geometry across the three elements ensures a consistent seating interface and reduces set-up time when swapping between workpieces. Delivered by a recognised toolmaker, the components are intended for fast replacement and reliable repeatability, which streamlines workflow in production or maintenance environments. Trusted sourcing and supply continuity Sourcing through Metav Werkzeuge provides easy access to compatible clamping components, backed by a broad product range and a commitment to reliability. Metav’s stock-holding and fulfilment approach aims to shorten lead times and secure ongoing supply to workshops and industrial buyers. For complex setups or confirmation of fit, the product documentation and Metav’s advisory service are available to clarify dimensions and intended use. Contact Metav Werkzeuge for ordering and application support and ensure the RÖHM block jaw set is the correct choice for the chuck and clamping tasks at hand. Technical Data Article number: 4121270160NW Label: Blockbackensatz f.Futter-D.160mm ungestuft ungeh.3St./VE RÖHM Manufacturer: RÖHM Facts Pack contents: 3 pieces Suitable for chuck Ø 160 mm Packaging unit: 1 Special features Unstepped, unground design Brand: RÖHM UID: 4121270160NW FAQ What chuck size is this jaw set compatible with? The RÖHM block jaw set is designed for use with a 160 mm chuck and provides full contact on the clamped surface. How many jaws are included in the pack? The delivery contains a three-piece set; the RÖHM set comprises three matching block jaws. Are the jaws stepped or unstepped? These block jaws are supplied unstepped and unground, allowing complete surface contact where appropriate. Can this set improve concentricity compared with stepped jaws? Yes, the unstepped geometry of the RÖHM block jaw set can increase contact area and help achieve better concentricity for suitable workpiece profiles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Chuck Key 10mm Square Insert With Spring-Loaded Sleeve, For 60mm Chuck - RÖHM
Take advantage of secure, rapid chuck engagement with a spring-mounted sleeve and a 10 mm insert square for reliable torque transfer; order directly via Metav Werkzeuge or ask the consultants for help with application questions. RÖHM chuck key — 10 mm insert square with spring-mounted sleeve A RÖHM chuck key designed for safe and reliable tightening of chucks, featuring a 10 mm insert square and a spring-mounted sleeve for workshop use Spring-mounted sleeve avoids stuck key 10 mm insert square for secure engagement Compatible with 60 mm chuck diameter Single-piece supply, packing unit 1 Faster, more reliable chuck handling for everyday tasks The spring-mounted sleeve provides a clear operational advantage: it reduces the risk of the key remaining lodged in the rotating chuck after adjustment. This mechanism ensures safer operation by allowing the sleeve to retract under slight movement, preventing accidental retention and minimising downtime. Alongside that, the 10 mm insert square guarantees a consistent mechanical interface with standard chuck drives, transferring torque precisely and reducing slippage. These features together improve workflow reliability in routine workshop operations. Reduced risk and clearer process control when changing tools Because the sleeve is spring-mounted, the key detaches cleanly when not required, supporting a predictable tool-change process and lowering the chance of tool or workpiece damage caused by a forgotten key. The spring action is a simple mechanical safeguard that aligns with established safety practices in machining environments, delivering a measurable benefit: fewer interruptions and a smaller likelihood of avoidable incidents during spindle start-up. This practical safety enhancement contributes to an efficient production rhythm. Simple engagement design for consistent torque transmission The 10 mm square drive is a standardised connection that offers repeatable engagement with compatible chucks. The square profile concentrates contact over defined faces, which helps to transmit operator torque without rounding or undue wear when used as intended. For workshops that require dependable manual tightening or loosening of chucks, this straightforward interface reduces variability and supports predictable clamping forces, which in turn helps maintain concentricity and part quality during turning or drilling operations. Practical information for selection and use Intended for chucks with a 60 mm nominal diameter, the key is supplied as a single unit per packaging, making stock control straightforward. The design focuses on robust functionality rather than unnecessary complexity: a spring-mounted sleeve plus a standard insert square form a compact solution for routine clamping tasks. If the application demands different drive sizes or special interface features, consult product documentation or seek tailored advice to ensure compatibility with the intended chuck system. For tailored purchasing advice or to secure the RÖHM chuck key with 10 mm insert square from stock, contact Metav Werkzeuge for expert guidance and order processing Technical Data Article number: 4121409060NW Brand: RÖHM Product type: Chuck key Facts Insert square: 10 mm Suitable for chuck Ø: 60 mm Packaging unit: 1 Special features Spring-mounted sleeve prevents accidental retention of the key in the rotating chuck With insert square for insertion engagement Single-piece supply, straightforward workshop tool FAQ Is this key compatible with all chuck types? Compatibility depends on the chuck drive interface; the RÖHM chuck key is designed for chucks with a 10 mm insert square and is suitable for chucks with a 60 mm nominal diameter. How does the spring-mounted sleeve improve safety? The spring-mounted sleeve on the RÖHM chuck key retracts under slight movement, preventing the key from remaining stuck in the rotating chuck and thereby reducing the risk of accidental spindle start incidents. Can the key be used on lathes and drill presses? The key’s 10 mm square interface is a standard manual drive; it can be used on lathes or drill chucks that accept a 10 mm insertion square and have a compatible 60 mm chuck diameter. What is included in the packaging? The product is supplied as a single unit (packaging unit 1) and includes the chuck key with the integrated spring-mounted sleeve and 10 mm insert square. Is a replacement sleeve or spare part available? Spare-part availability varies by supplier; refer to the RÖHM product documentation or consult Metav Werkzeuge for information about spare parts and service options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm External Stepped Hardened Jaws Chuck Jaw Set, For 160mm Chuck - RÖHM
Take advantage of the combination of precise clamping, hardened durability and quick replacement to maintain consistent production quality; order the jaw set directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Jaw set for chuck Ø 160 mm – externally stepped, hardened jaws | RÖHM Jaw set for chuck Ø 160 mm designed for secure external clamping in workshop chucks and light-turning applications Externally stepped jaws for secure clamping Hardened steel for prolonged wear resistance Designed for 160 mm chuck mounting Greater uptime through hardened clamping components The set features hardened outer jaws engineered for increased wear resistance, which translates into fewer replacements and more running hours between maintenance intervals. This robustness supports steady production workflows and reduces the risk of dimensional drift when machining batches, helping to preserve component tolerances. Where repeatability matters, the combination of surface hardening and consistent jaw geometry contributes to reliable positioning and extended service life. Versatile external gripping with stepped jaw geometry The externally stepped profile allows a range of external diameters to be gripped securely by a single jaw set, reducing changeover time between different workpieces. The stepped design improves contact distribution and clamping stability, which is particularly beneficial when holding non-uniform or stepped components. For workshops that require flexible throughput without frequent tooling swaps, this approach minimises downtime and simplifies inventory management. Complete three-piece set for immediate replacement Supplied as a three-piece set, the package provides the full complement of outer jaws needed for immediate fitting to a compatible chuck. The configuration matches standard 160 mm chuck layouts and permits straightforward refurbishment of a worn jaw assembly without the need to replace the entire chuck. By keeping matched jaws, concentricity and repeatability are maintained, supporting consistent part quality across production runs. Choose the RÖHM hardened outer jaws for dependable workshop clamping and contact Metav Werkzeuge for availability or tailored advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4121268160NW Product type: Jaw set Brand: RÖHM Suitable for chuck diameter: 160 mm Pack unit: 1 Core specifications Chuck diameter: 160 mm Pieces per set: 3 SKU: 4121268160NW Materials & features Externally stepped outer jaws Hardened for wear resistance Compatible with 160 mm chucks Three-piece replacement jaw set FAQ Are these jaws compatible with any 160 mm chuck? These jaws are intended for chucks with a 160 mm mounting diameter; the jaw set for chuck Ø 160 mm (RÖHM, SKU 4121268160NW) is designed to match standard outer-jaw mounting arrangements, but mounting geometry should be confirmed against the chuck model before order. What does "hardened" mean for service life? Hardened indicates a heat-treated surface that increases wear resistance; the RÖHM jaw set's hardened finish extends operational life and reduces frequency of replacements in regular workshop use. Can the stepped profile grip varying diameters without custom machining? Yes, the externally stepped geometry permits secure gripping of multiple external diameters within the jaw's stepped range, reducing the need for custom jaw modifications for many common part geometries. Is the set delivered complete for immediate installation? The three-piece set supplies the complete outer jaw complement for a 160 mm chuck configuration, enabling immediate replacement of worn jaws without procuring additional matching parts. How should concentricity be checked after fitting the jaws? After fitting the jaw set for chuck Ø 160 mm, run an indicator check at the recommended radii; the matched three-piece arrangement from RÖHM helps maintain concentricity when installed and torqued evenly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Independent Four-Jaw Chuck, 4×M10 T-Slots, 1500 rpm - Vertex
Take advantage of the combination of adaptable clamping, stable rotation and straightforward mounting to keep setups efficient and parts secure; order the unit directly via Metav Werkzeuge or ask our consultants for application guidance. Independent Four-Jaw Chuck VKC-6 – 160 mm, independent jaws by Vertex An Independent Four-Jaw Chuck VKC-6 for versatile workholding on lathes and turning centres, designed to grip irregular, round and square components with individual jaw adjustment Independent jaw adjustment for irregular workpieces 160 mm diameter for medium-sized components Max speed 1,500 r.p.m. for reliable turning 4 × M10 mounting; robust 8.3 kg construction Faster setups and repeatable clamping for varied parts The independent jaws enable each jaw to be positioned separately, which is particularly useful when securing off-centre or irregularly shaped components. This flexibility reduces the need for specialised fixtures and shortens set-up time, supporting higher throughput in jobbing environments. With a nominal 160 mm diameter, the clamping range covers many medium-sized parts while maintaining the repeatability required for consistent turning and finishing operations. Stable rotation and secure attachment improve surface quality Built for dependable rotation, the chuck reaches up to 1,500 r.p.m., matching the demands of common lathe and turning-centre cycles. Attachment uses 4 × M10 mounting points for a secure backplate connection, and the unit’s 8.3 kg mass contributes to damping and better torque transfer. Together, these characteristics help to reduce vibration, improve surface finish and lower the risk of scrap—attributes that translate directly into time and cost savings on the shop floor. Practical compatibility and workshop benefits As a robust four-jaw solution from Vertex, the VKC-6 supports a wide range of workshop tasks without the immediate need for special jaws or complex fixtures. The individual jaw control suits batch work with varying part profiles, while the solid construction gives confidence in repeated operations. Combined with Metav’s quality-controlled stocking in Emmerich and access to product expertise, the chuck is a pragmatic choice for maintenance departments and small to medium-sized production cells seeking reliable, flexible clamping. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VKC-6 independent four-jaw chuck into existing setups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VKC-6 Type: Independent four-jaw chuck Diameter: 160 mm Max speed: 1,500 r.p.m. Weight: 8.3 kg Mounting: 4 × M10 GTIN: 4061905085291 Facts Diameter 160 mm Maximum speed 1,500 r.p.m. Mass 8.3 kg Special features Independent jaw operation 4 × M10 mounting points Robust construction for improved damping Suitable for irregular, round and square workpieces FAQ What types of components can be clamped with this chuck? The VKC-6 independent four-jaw chuck from Vertex is suitable for round, square and irregular workpieces, providing adaptable holding without the immediate need for special jaws. How is the chuck mounted to the machine? Mounting is via 4 × M10 attachment points; the VKC-6 is designed for secure connection to standard backplates. What is the maximum permitted rotational speed? The unit is rated to operate up to 1,500 r.p.m., which aligns with many conventional lathe and turning-centre applications. Is the chuck suitable for CNC and manual lathes? The VKC-6’s specifications make it appropriate for many conventional and CNC turning operations; machine spindle and backplate compatibility should be confirmed before installation. What basic maintenance does this chuck require? Regular inspection of jaw seating and lubrication of sliding surfaces is recommended to maintain consistent clamping performance for the Vertex VKC-6. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
160mm Insert Prism Clamping Ø25 For Quick-Change Holder, For Round Shank - TECWERK
The compact design combines clamping Ø 25 mm capacity with a length of 160 mm for stable gripping of round shanks, making it a pragmatic choice for modular toolholders; order the prism insert via Metav Werkzeuge or consult the team for compatibility advice. TECWERK Insert prism Gr. C – Clamping Ø 25 mm, L 160 mm The TECWERK insert prism Gr. C is a precision clamping element for interchangeable holders, designed to secure round shanks with a maximum clamping diameter of 25 mm in modular toolholding systems. Size C insert prism For interchangeable holders with prism Clamping Ø 25 mm maximum Length 160 mm Consistent grip and process reliability The prism insert delivers a reproducible clamping geometry that reduces slippage and runout when securing round shanks. By converting a circular shaft to a defined three-point contact, the component increases axial and radial stability during machining or inspection setups. The clear specification of clamping Ø 25 mm and the modular format help engineers plan tool chains with predictable tolerances and minimised rework, improving throughput in small-batch and series production alike. Faster set-up through modular compatibility Designed for use with interchangeable holders, the prism insertion shortens changeover time and simplifies tool management on the shop floor. The length 160 mm provides adequate reach while maintaining rigidity in the holder, so fixtures and jigs remain stable under cutting or measuring forces. The modular approach supports lean workflows: standardised inserts reduce the number of bespoke fixtures, making maintenance and stock control more efficient across workshops and production cells. Selection guidance for accurate integration Choose the Size C prism insert when the application requires a dedicated clamping solution for round shanks up to 25 mm. The specification emphasises compatibility rather than material assumptions; confirmation of holder interface and shank geometry prevents misfits and downtime. For procurement and planning, treat the prism insert as a component of a modular clamping system: matching the insert size to the toolholder and documenting the length 160 mm in the fixture list ensures reproducible assembly and predictable quality outcomes. Contact Metav Werkzeuge for personalised technical advice on TECWERK prism inserts and to confirm holder compatibility before ordering. Technical data Article number: 2000832143NW Name: Insert prism Gr. C (Einlegeprisma) Brand: TECWERK Facts Length: 160 mm Clamping Ø: 25 mm Pack unit: 1 Special features For interchangeable holders with prism For round shanks Size C insert prism Compatible with changeable prism holders FAQ What maximum shank diameter is supported by this prism insert? The TECWERK insert prism Gr. C supports a maximum clamping diameter of 25 mm for round shanks. Is this prism intended for modular holders or fixed fixtures? This prism insert is designed specifically for interchangeable holders with a prism interface, enabling modular toolholder systems. What is the functional length of the component? The component has a length of 160 mm, a dimension to consider when checking holder reach and fixture clearance. How does a prism insert improve clamping compared with a plain collet? A prism insert converts circular shanks into defined contact points, improving axial and radial stability and reducing slip and runout during machining or measuring operations. Which product code identifies this item for ordering? Order using article number 2000832143NW, listed as the TECWERK insert prism Gr. C Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Insert Prism Gr. C Clamping Ø 32mm For Toolholder With Prism - TECWERK
Take advantage of a Type C prism insert that provides secure clamping for round shanks and steady engagement with its 160 mm length; order directly via Metav Werkzeuge or ask the consultants for specification support. TECWERK Prism insert Type C — Prism insert for interchangeable holders, Ø 32 mm, L 160 mm Prism insert Type C for interchangeable holders, engineered to clamp round shanks with a maximum achievable clamping diameter of 32 mm and a length of 160 mm for deeper tool engagement. Prism insert Type C compatibility Secure clamping for round shanks Ø 32 mm Length 160 mm for deep engagement Designed for interchangeable prism holders Consistent clamping for repeatable machining A dedicated prism insert delivers a stable contact surface that converts round shanks into a reliably clamped interface. The clamping diameter 32 mm indicates the maximum achievable clamp after the insert is seated in the interchangeable holder; this value is decisive when matching tool shank sizes to the clamping system. By providing a defined contact geometry, the component supports repeatability in series production and reduces time spent on trial-and-error alignment. Faster tool changes with holder compatibility Designed specifically for use with interchangeable holders, the insert simplifies changeovers between operations. The prism seating ensures that round shanks locate consistently, which shortens set-up loops and helps maintain process flow. Where quick tool rotation between fixtures is required, the use of a purpose-made prism reduces the need for additional fixtures and enables a smoother workflow in mixed-production environments. Geometry and length that improve stability A length of 160 mm delivers deeper axial engagement within the holder, improving rigidity when working with longer shank lengths. Deeper insertion reduces bending moments transmitted to the clamping interface, which contributes to steadier cuts and prolonged tool life. The combination of the insert’s profile and its engagement length is particularly beneficial in operations that demand dimensional conformity across multiple workpieces. Practical selection and workshop integration Selection is straightforward: choose the Type C prism insert where the toolholder system accepts prism inserts and the intended shank diameter does not exceed Ø 32 mm. The component is intended for clamping round shanks and is fitted into a compatible interchangeable prism holder to achieve the specified maximum clamping diameter. For workshops seeking to streamline fixtures and reduce the variety of bespoke chucks, the prism approach offers a compact, specification-led solution with clear mechanical benefits. For supply and technical advice on this TECWERK prism insert, contact Metav Werkzeuge in Emmerich for fast order processing and specification assistance via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number/SKU: 2000832144NW Brand: TECWERK Product: Prism insert (Type C) Facts Length: 160 mm Clamping diameter (max): 32 mm Packaging unit: 1 Compatibility & features For interchangeable holders with prism For round shanks Clamping Ø = maximum achievable clamping diameter after inserting the prism into the holder Type: C FAQ What diameter of shank can be clamped with this prism insert? The maximum achievable clamping diameter when the prism insert is used in an interchangeable holder is 32 mm; match the shank accordingly. Which holder systems is this insert compatible with? The prism insert is designed for use with interchangeable prism holders (Type C); compatibility depends on the holder accepting a Type C prism seating. How does the 160 mm length affect performance? A 160 mm engagement provides deeper axial support in the holder, improving rigidity and helping to maintain dimensional stability during machining. Is the prism insert suitable for non-round tool shanks? The component is intended for round shanks; non-round geometries will require a different clamping solution. Can the SKU 2000832144NW be quoted for replacement parts? Yes, SKU 2000832144NW identifies this specific prism insert for orders and enquiries. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Jaw Set For 160mm Chuck, 3 Pieces - RÖHM
Take advantage of the combination of robust clamping performance and long service life provided by hardened jaws compatible with a 160 mm chuck; order directly via Metav Werkzeuge or ask their consultants for clarification on suitability. RÖHM Basic Jaw Set for 160 mm chuck — hardened, 3-piece A RÖHM Basic Jaw Set engineered for reliable clamping in turning and workshop applications, suitable for use with chucks having a 160 mm diameter. Hardened construction for long service life Compatible with 160 mm chuck diameters Three-piece set for even clamping pressure Consistent clamping for repeatable machining results The RÖHM Basic Jaw Set delivers precision clamping for turning operations on chucks with a 160 mm diameter. Hardened contact surfaces maintain concentricity during repeated cycles, which improves repeatability between setups and reduces the need for rework. The design supports stable tool engagement and predictable part geometry, translating technical performance into measurable time savings on the shop floor. Reduced downtime through durable design With a focus on wear resistance, the hardened jaws withstand abrasive and cyclic loads more effectively than untreated components. That longevity reduces the frequency of replacements and maintenance interventions, improving overall equipment availability. The robust construction is particularly beneficial in small-batch production or repair workshops where uptime directly affects delivery reliability and operational cost-efficiency. Straightforward integration into existing chuck systems The three-piece configuration provides balanced radial pressure for secure part holding across the clamping surface. This geometry helps to avoid slippage and minimises distortion of workpieces when machining softer or irregular stock. The set is intended for standard 160 mm chucks and allows efficient replacement of worn jaws, supporting quick retooling and consistent clamping behaviour in everyday workshop tasks. Trusted choice for professional equipment fleets Engineered by a recognised brand, this jaw set combines hardened surfaces and a pragmatic three-piece layout to meet routine industrial demands. For workshops consolidating suppliers, the set offers a dependable component that aligns with broader aims of repeatable quality and stable production flow. Advice on matching jaw profiles and specific chuck models can refine performance for specialised turning tasks. For durable, precision clamping choose the RÖHM jaw set and contact Metav Werkzeuge for tailored advice and ordering — Metav Werkzeuge offers dependable supply from Emmerich and technical support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4121273160NW Manufacturer: RÖHM Product type: Chuck jaw set For chuck Ø 160 mm Contents: 3 pieces Packaging unit: 1 Facts Diameter compatible: 160 mm Pieces per set: 3 Packaging unit: 1 Special features Hardened jaws Three-piece configuration Designed for 160 mm chucks FAQ What chuck diameter is this jaw set designed for? The jaw set is designed specifically for use with chucks of 160 mm diameter and delivers stable clamping for that size range. Are the jaws hardened for durability? Yes, the jaws feature a hardened surface to provide enhanced wear resistance and extended service life. How many jaws are included in the set? The set contains three pieces, configured to provide even clamping pressure across the workpiece. Is this product suitable for precision turning work? The design and hardened surfaces make this jaw set suitable for precision turning where concentricity and repeatability are important. What is the article number for ordering or reference? The article number for this jaw set is 4121273160NW Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Jaw Set for 160mm Chuck, Stepped Hardened Jaws 3 Pieces - RÖHM
Take advantage of the combination of secure clamping, hardened stepped jaws and a practical three-piece configuration for reliable turning operations and efficient changeover. Order the chuck jaw set directly via Metav Werkzeuge or consult the team for application advice. RÖHM Chuck Jaw Set – Hardened, Stepped Jaws for 160 mm Chucks RÖHM Chuck Jaw Set for lathe chucks, designed to provide precise and repeatable clamping in workshop and industrial turning applications Hardened stepped jaws for secure grip Compatible with 160 mm chucks Three-piece set for full jaw coverage RÖHM manufacturing quality Precision clamping for consistent machining results A well-matched jaw set is essential for repeatable turning work. The hardened stepped jaws in this set deliver consistent contact geometry, which reduces run-out and contributes to uniform part dimensions across batches. The stepped profile allows the jaws to seat progressively, improving grip on a range of workpiece diameters while maintaining secure clamping. For operations where concentricity and dimensional stability matter, this configuration supports reliable cycle-to-cycle performance and reduces time spent on rework. Robust construction for long service life Durability is central to uninterrupted production. These jaws are supplied in a three-piece set that is heat-treated for wear resistance, offering a longer service interval compared with unhardened alternatives. The hardened surfaces show improved resistance to abrasion and deformation during clamping, which helps retain the original jaw geometry and cutting accuracy. Using hardened, stepped components reduces the need for frequent replacement, translating into lower downtime and predictable maintenance planning. Compatibility and practical handling in the workshop Supplied for use with a 160 mm chuck, the jaw geometry is compatible with common chuck designs used in small to medium lathes and machining centres. The set arrangement simplifies inventory and changeover: the three matching jaws provide full coverage without mixing sizes, enabling faster installation and reduced risk of error. Clear labelling and standard fitment make the set a practical option for job shops and production lines that prioritise quick tooling swaps and steady throughput. The result is an efficient workflow supported by components that are straightforward to fit and maintain. For dependable RÖHM clamping performance and further technical clarification, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical data SKU: 4121269160NW Article: Drehbackensatz Brand: RÖHM Facts Suitable for chuck Ø: 160 mm Set content: 3 pieces Packaging unit: 1 Material & special features Stepped jaws, hardened Designed for lathe chuck clamping Three matching jaws for full jaw coverage FAQ What chuck size is this jaw set designed for? This jaw set is designed for a 160 mm chuck and provides stepped, hardened jaws suitable for that diameter. How many jaws are included in the set? The set contains three jaws, supplied as a matched three-piece configuration for full jaw coverage. Are the jaws hardened for durability? Yes, the jaws are hardened and feature a stepped profile to improve wear resistance and clamping consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Quick-Change Tool Holder With Cylindrical Bore 50mm, For Heavy Boring Bars - TECWERK
Efficient production with secure clamping and fast changeovers thanks to the 50 mm clamping diameter and 160 mm overall length; ideal for direct mounting of large boring bars and Morse taper sleeves. Order the quick-change holder directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Quick-change holder for steel holder head C — 50 mm clamping diameter, 160 mm length (TECWERK) A Quick-change holder for steel holder head C designed for direct acceptance of large boring bars and Morse taper sleeves, providing a compact 160 mm reach with a cylindrical bore. Cylindrical bore for direct mounting Accepts large boring bars and Morse tapers Designed for quick-change steel holder head C 160 mm overall length 50 mm clamping diameter Precise clamping that stabilises heavy tooling The cylindrical bore and 50 mm clamping diameter enable secure, concentric seating of oversized boring bars, which reduces vibration and improves surface finish. Direct mounting avoids intermediate adapters and thus preserves axial alignment; this results in consistent concentricity and predictable machining results. For workshops that demand repeatable accuracy, the combination of bore size and seating geometry translates directly into fewer rejects and less rework. Faster tool changes for uninterrupted productivity The quick-change design is built to reduce non-productive time during setups. By integrating with a steel holder head C, the holder permits rapid release and replacement of tooling, shortening machine downtime between operations. This efficiency gain supports higher throughput without compromising process stability, making it suitable for job shops and production lines where cycle times and changeover speed are crucial. Compatibility with Morse taper sleeves and large boring bars Prepared for the direct reception of Morse taper sleeves, the holder accepts standard taper-mounted accessories, simplifying tool inventory and enabling flexible tooling strategies. A Morse taper sleeve is a tapered fitting that seats by wedging action to transmit torque and axial loads; using it here provides secure engagement while remaining easy to dismantle for maintenance. The 160 mm length balances working reach with rigidity, offering a practical compromise between access and stability. Workshop-grade reliability and low-maintenance integration Configured for robust day-to-day use, the holder focuses on mechanical simplicity: a cylindrical seating surface and proven clamping geometry minimise wear points and permit straightforward inspection. Regular visual checks and routine cleaning keep the clamping interface performing reliably; when maintained, the holder supports long service intervals and dependable repeatability. The practical layout eases inspection and replacement of wear components where needed. For secure, fast and precise machining applications, order the TECWERK quick-change holder via Metav Werkzeuge for reliable supply from Emmerich — contact: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000832174NW Brand: TECWERK Product type: Quick-change holder Dimensions & core data Overall length: 160 mm Bore diameter: 50 mm Packaging unit: 1 Special features Cylindrical bore for direct mounting For direct acceptance of large boring bars and Morse taper sleeves For quick-change steel holder head C FAQ What materials and tool types are compatible with the quick-change holder? The Quick-change holder for steel holder head C (SKU 2000832174NW) is specified for direct use with large boring bars and Morse taper sleeves; compatibility depends on the tool shank and taper standards in use. How does the 50 mm clamping diameter affect machining stability? A 50 mm clamping diameter gives a larger contact area and, in the Quick-change holder for steel holder head C, supports improved rigidity and reduced vibration for heavy-duty boring and finishing tasks. Can the holder be used with Morse taper sleeves from different suppliers? Morse taper sleeves that conform to standard taper dimensions are suitable for use in this holder; the quick-change configuration accepts standard sleeves for straightforward interchange. What is the functional benefit of the 160 mm overall length? The 160 mm length provides sufficient reach for many internal and external boring operations while maintaining rigidity; it represents a compromise between accessibility and tool stiffness in workshop environments. Is the holder compatible with a standard steel holder head C quick-change system? Yes, the Quick-change holder for steel holder head C is designed specifically for integration with a steel holder head C quick-change system (TECWERK), enabling fast tool swaps and reliable seating. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Tool Holder For Steel Head C With 40mm Cylindrical Bore, Quick-Change Compatible - TECWERK
Benefit from the 40 mm clamping diameter and 160 mm overall length for dependable tool support and reduced setup time; the cylindrical bore enables direct mounting of large boring bars and Morse taper sleeves, improving concentricity and surface finish. Order the interchangeable holder directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Interchangeable Holder — clamping Ø40 mm, 160 mm length The TECWERK interchangeable holder for a quick-change steel holder head C provides direct reception of large cylindrical shanks and Morse taper sleeves, optimised for turning and heavy-duty boring operations Cylindrical bore for direct mounting Accepts large boring bars and Morse taper sleeves For quick-change steel holder head C Clamping diameter 40 mm Efficient, stable clamping for productive machining The holder is designed to deliver secure clamping and repeatable concentricity, key for high-quality turning and boring. A 40 mm clamping diameter paired with a 160 mm overall length provides a substantial contact area that reduces vibration and improves surface finish when machining larger tools. The cylindrical bore means large-diameter boring bars or Morse taper adaptors can be fitted directly, eliminating intermediate adapters and shortening setup time. This reduction in interfaces often results in improved dimensional accuracy and fewer tool-change interruptions, supporting smoother production workflows. Seamless integration with quick-change tool heads Compatibility with the quick-change steel holder head C simplifies tool management on multi-tool turrets and lathe quick-change systems. The interchangeable design allows rapid swaps of cutting assemblies, which reduces machine downtime and increases uptime for serial production. The construction supports robust seating of Morse taper sleeves, ensuring axial and radial stability under load. By streamlining the tool-change process, the holder contributes to measurable efficiency gains and a lower total cost of operation for workshops and production environments. Practical handling and workshop advantages The execution with a cylindrical bore and direct-receive capability reduces the number of components needed during set-up and maintenance, making inventory and handling easier. The design emphasises straightforward installation into the steel holder head C system, allowing technicians to maintain focus on machining parameters rather than adapter compatibility. Durable mechanical interface characteristics promote consistent repeatability over multiple cycles, which is particularly valuable where tight tolerances and surface integrity are required. For bespoke machine interfaces or further technical specification clarification, technical advice is available to ensure correct integration. Contact Metav Werkzeuge today to discuss compatibility, request additional technical details for TECWERK interchangeable holders, or arrange expert advice on integrating the holder into existing quick-change systems Technical data Article number: 2000832173NW Product type: Interchangeable holder Manufacturer: TECWERK Label: Wechselhalter f.Stahlhalterkopf C f.gr.Zylinderschäfte Spann-D.40mm TECWERK Facts Overall length: 160 mm Bore diameter: 40 mm Packaging unit: 1 Special features Execution: with cylindrical bore Direct mounting of large boring bars and Morse taper sleeves For quick-change steel holder head C Suitable for steel holder head C FAQ What clamping diameter does the holder provide? The TECWERK interchangeable holder (Interchangeable holder, SKU 2000832173NW) provides a clamping diameter of 40 mm. Can large boring bars and Morse taper sleeves be used directly? Yes, the holder features a cylindrical bore for the direct reception of large boring bars and Morse taper sleeves without additional adaptors. Which quick-change system is this holder designed for? This unit is designed for use with a quick-change steel holder head C and integrates seamlessly into compatible quick-change tool systems. What is the overall length and how does it affect stability? The overall length is 160 mm; the extended contact length improves axial stability and helps reduce vibration during heavy-duty machining. Is this product suitable for serial production environments? The design of the interchangeable holder supports rapid tool changes and repeatable clamping, making it suitable for workshops and production settings that require consistent performance Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
164mm Centre Tip Live Centre, 0.005mm Accuracy, Alloy Steel, 2000 rpm - Vertex
Take advantage of 0.005 mm concentricity together with a robust alloy steel construction and a compact 164 mm length for reliable turning support; order the VPC‑MT3 directly via Metav Werkzeuge or ask our consultants for tailored advice. VPC‑MT3 Universal live centre — 0.005 mm runout, 2000 r.p.m., Vertex A VPC‑MT3 Universal live centre for rotating workpiece support in lathe turning, designed to maintain concentricity and reduce deflection during machining. High precision: 0.005 mm runout Designed for speeds up to 2000 r.p.m. Alloy steel body for durability 164 mm overall length for deep support Maintain concentric turning with measurable accuracy The VPC‑MT3 delivers exceptionally low runout of 0.005 mm, a specification that directly improves repeatability and surface finish in turning operations. Low runout means the centre point runs closer to the true axis, reducing radial vibration and minimising rework. For workshops aiming to keep tolerances tight, this level of precision supports repeatable part quality and consistent inspection results. Reliable rotation at practical lathe speeds Designed for rotation at up to 2000 r.p.m., this revolving centre suits a wide range of medium‑speed turning tasks. The controlled rotational capability ensures stable support of the workpiece, which in turn maintains machining tolerances and reduces tool wear. With an overall length of 164 mm and a compact mass of 0.9 kg, the unit provides deep support where longer reach is required while remaining easy to handle during setup. Durable construction for everyday workshop use Constructed from alloy steel, the live centre is built for longevity under routine workshop conditions. The material choice balances toughness with dimensional stability, keeping the centre point concentric over many cycles. As a universal support device, the centre is suited for general turning applications where robust, repeatable support is required rather than specialised or medical precision use. For precision turning tasks where concentricity and dependable rotation matter, choose the Vertex VPC‑MT3 — contact Metav Werkzeuge in Emmerich for product availability and application guidance via info@metav-werkzeuge.com or by phone. Technical Data Article number: VPC-MT3 GTIN: 4061905085567 Manufacturer: Vertex Facts Runout accuracy: 0.005 mm Maximum speed: 2000 r.p.m. Length: 164 mm Weight: 0.9 kg Special features Material: alloy steel Type: revolving / live centre Brand: Vertex FAQ What degree of concentricity can be expected from this live centre? The VPC‑MT3 achieves a runout accuracy of 0.005 mm, which supports high concentricity in standard turning operations. Is the VPC‑MT3 suitable for medium‑speed lathes? Yes, the unit is specified for operation up to 2000 r.p.m., making it appropriate for many medium‑speed lathe applications. What materials is the centre made from and why does that matter? The body is made from alloy steel, chosen for its toughness and dimensional stability, which helps preserve alignment and service life under workshop use. How does the length of 164 mm affect its application? An overall length of 164 mm provides extended reach for deeper support into the spindle or over long workpieces while keeping handling straightforward. Which SKU should be ordered for this universal live centre? Order the VPC‑MT3 (SKU: VPC-MT3) for the universal live centre in Vertex’s range Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
165mm 60° Carbide Centre Punch Fixed Tip, DIN 806 - Vertex
Take advantage of the combination of carbide tip longevity, a 60° centre angle for standardised marking and a robust 165 mm length for controlled reach — all contributing to smoother production and less rework. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. VLC-114 centre punch tip — fixed carbide marking point, 60° (Vertex) The VLC-114 centre punch tip is a fixed, carbide-tipped marking point designed for precise centre punching and layout work in workshop and production environments, conforming to DIN 806. Fixed carbide tip for long-lasting precision 60° centre angle for standard marking Length 165 mm for controlled reach DIN 806 compliant manufacturing quality Reliable marking that reduces rework and downtime A hard-wearing carbide tip delivers consistently sharp impressions over long production runs, which improves precision and reduces the need for repeat marking. The standard 60° centre angle ensures marks are compatible with common tooling and centre drills, enabling predictable alignment during drilling and machining operations. With a robust design, the tool supports steady contact force and repeatable results, contributing to faster cycle times and fewer corrections in downstream processes. Stable design to streamline workshop routines The fixed design of the tip eliminates play between components, giving stable contact and a uniform mark every time; this supports consistent part set‑up and inspection. Compliance with DIN 806 provides a recognised performance baseline, simplifying integration into existing toolsets and quality procedures. A length of 165 mm offers a good balance between reach and control, allowing safer handling when marking assemblies or parts positioned within fixtures without sacrificing operator accuracy. Material advantages explained for confident selection Carbide as a tip material offers superior wear resistance compared with conventional steel points, preserving geometry under repeated impact and abrasive conditions; this equates to extended service life and lower lifetime costs per mark. The compact, robust construction and the tip material together deliver high durability and stable imprint geometry, which supports reliable inspection and repeatability across batches. For production environments that prioritise uptime and predictable tool behaviour, this configuration provides an economical and technically sound solution. Metav as a dependable procurement partner As a precision partner, Metav combines decades of expertise with a broad catalogue to simplify procurement: a single source for measurement and workshop supplies reduces supplier complexity while ensuring product consistency. With a large European stock and established logistics from Emmerich, Metav offers transparent order handling and steady supply — factors that matter for uninterrupted production planning and dependable workshop inventories. Contact Metav Werkzeuge for application guidance on the VLC-114 centre punch tip and secure a reliable marking solution tailored to workshop requirements; Metav’s consultants in Emmerich assist with technical details and delivery arrangements. Technical Data Article number: VLC-114 GTIN: 4061905088216 Material: Carbide tip Standard: DIN 806 Data Length: 165 mm Tip angle: 60° Weight: 0.8 kg Special features Fixed tip design Manufacturer: Vertex SKU: VLC-114 FAQ What is the main benefit of a carbide-tipped centre punch? A carbide-tipped centre punch provides higher wear resistance and longer service life than standard steel points, resulting in more consistent marking and fewer tool changes for the VLC-114 centre punch tip (Vertex, SKU VLC-114). Is the tool suitable for standard drilling preparation? Yes, the 60° tip geometry produces standardised centre marks that are suitable for subsequent drilling and centre-drilling operations, helping to maintain repeatable alignment. Does the product conform to industry standards? The tool is manufactured in accordance with DIN 806, offering a recognised specification for form and function in marking applications. Is the tip replaceable or permanently fixed? The part is specified as a fixed tip design; replaceability is not listed in the standard specification for this item. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
167mm Self-Centring 6-Jaw Chuck, 1200 rpm - Vertex
Take advantage of precise, repeatable clamping thanks to the combination of a self-centring 6-jaw design and a compact Ø 167 mm diameter, ensuring stable turning at up to 1,200 r.p.m. Order directly via Metav Werkzeuge or consult our specialists for tailored delivery and fitment advice. VAS-6 – 6‑jaw self‑centring chuck, Ø 167 mm, Vertex The VAS-6 is a 6‑jaw self‑centring chuck for lathe workholding, engineered to provide consistent clamping and fast set-up for production and workshop applications 6-jaw self-centring design Diameter 167 mm for medium workpieces Max speed 1,200 r.p.m. for efficient turning Robust construction, 9.2 kg mass Repeatable centring for consistent part quality The 6-jaw layout delivers uniform gripping force around the workpiece, reducing runout and improving repeatability across batch production. The self-centring mechanism shortens setup times compared with independent-jaw systems, which supports higher throughput without sacrificing accuracy. For operations where concentricity and surface finish are critical, the chuck’s geometry helps maintain steady cutting conditions and predictable results. Balanced mass and speed for stable machining A mass of 9.2 kg combined with a rated maximum of 1,200 r.p.m. provides a stable rotating assembly that resists chatter in medium‑duty turning. The Ø 167 mm jaw span suits a wide range of round and slightly irregular components often encountered in maintenance, prototyping and small-series manufacture. Clear specification of rotational speed supports process planning and helps avoid exceeding safe operational limits during roughing and finishing passes. Practical integration and workshop efficiency Designed for straightforward mounting in standard lathe setups, the chuck simplifies workholding choices and reduces the number of bespoke fixtures required. The robust construction supports frequent clamping cycles in daily workshop use, while the compact footprint preserves access to tooling and measurement points. Combining predictable clamping behaviour with straightforward handling, this chuck supports leaner workflows and reduces non-productive time in the machine cycle. For reliable, production-ready clamping trust Vertex’s VAS-6—contact Metav Werkzeuge in Emmerich for personalised advice and swift supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: VAS-6 GTIN: 4061905086946 Manufacturer: Vertex Numbers / Core Technical Data Diameter: 167 mm Max speed: 1,200 r.p.m. Weight: 9.2 kg Special features 6 jaws Self-centring chuck design eClass: 21020590 FAQ How does the 6-jaw design affect concentricity? The six-jaw layout increases contact points and balances clamping forces, so the VAS-6 achieves improved concentricity and repeatability compared with three-jaw designs for many medium-sized parts. What is the maximum safe rotational speed for this chuck? The chuck is rated to operate at up to 1,200 r.p.m., which should be observed to ensure safe and stable machining conditions when the VAS-6 is mounted. Which workpiece diameters are suitable for this chuck? With a diameter of 167 mm, the chuck is intended for medium workpieces commonly processed in general workshop and light production turning operations. Can the chuck be used for high-precision finishing operations? Yes, the self-centring mechanism and uniform jaw engagement of the VAS-6 support finishing passes where concentricity and surface consistency are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
168mm Clamping Ring For Soft Jaw Attachments, For 6" Jaw Caliper - Vertex
Combining a 168 mm nominal diameter with compatibility for 6" soft-jaw attachments and a compact mass of 1.5 kg, this clamping ring provides steady holding with minimal handling effort; Order the clamping ring VFR-06 directly via Metav Werkzeuge or ask our consultants if needed Clamping Ring VFR-06 — 168 mm for 6" soft-jaw attachments, Vertex The clamping ring VFR-06 is a compact workholding accessory engineered to secure soft-jaw fixtures, optimising set-ups in workshop and bench-mount applications 168 mm nominal diameter Compatible with 6" soft-jaw attachments Lightweight at 1.5 kg for easy handling Robust retention for repeatable clamping Faster, repeatable workholding for consistent parts The clamping ring is designed to deliver reliable clamping in fixtures that use soft jaws, helping to maintain concentricity and repeatability across short production runs. Its 168 mm nominal diameter fits common jaw layouts, enabling straightforward integration with existing chucks and fixtures. By focusing on secure radial retention rather than bulk, the component reduces micro-movement during machining and finishing, which supports higher first-pass accuracy and fewer adjustments between cycles. The result is a measurable improvement in throughput and part consistency without complex retrofitting. Reduced setup effort and safer handling At just 1.5 kg, the component lowers handling strain during tool changes and jaw swaps, shortening changeover time and improving operator ergonomics. The light mass also simplifies manual positioning and alignment when paired with standard soft-jaw attachments, making quick fixtures practical even on compact benches. Combined with the clamping geometry tailored for soft materials, the solution minimises the risk of workpiece deformation while preserving a secure hold—an advantage when sensitive or finished surfaces require gentle yet firm retention. Seamless integration for workshop workflows Compatibility with 6" soft-jaw attachments ensures the ring can be introduced into familiar workholding systems without extensive modification. Produced under the Vertex name, the unit supports routine maintenance strategies and straightforward inventory control in precision workshops. Where traceability is important, the VFR-06 designation and associated identifiers simplify stock management and reorder procedures. For operations seeking to harmonise fixtures across machines, the ring offers a compact, purpose-built option that balances accessibility, repeatability and workshop efficiency. Discuss application needs with Metav Werkzeuge to confirm fit for soft-jaw systems and to reserve the VFR-06 for immediate dispatch from our Emmerich facility Technical data Article number: VFR-06 GTIN: 4061905086861 Brand: Vertex Core specifications Diameter: 168 mm Weight: 1.5 kg Suitable for: 6" soft-jaw attachments Applications and features For use with soft-jaw attachments Compatible with 6" soft-jaw workholding systems SKU: VFR-06 FAQ Is this clamping ring compatible with standard 6" soft jaws? Yes. The clamping ring VFR-06 is designed for use with 6" soft-jaw attachments and fits standard workholding arrangements that accept that jaw size. What is the nominal diameter of the component? The ring has a nominal diameter of 168 mm, which accommodates a wide range of chuck and fixture layouts commonly used in workshop environments. How much does the clamping ring weigh? The unit weighs 1.5 kg, a balance between robustness and easy handling during jaw changes and set-up operations. For which applications is this component suitable? The product is intended for workholding scenarios that use soft jaws—holding, finishing and light machining where secure retention and minimal surface deformation are required. What identifiers help with ordering and stock control? Order using SKU VFR-06 or GTIN 4061905086861; both identifiers are provided to simplify procurement and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
175mm Magnetic Chip Collector With Shield, 390mm Overall Length - TECWERK
Take advantage of a compact, shielded magnetic collector that secures ferrous swarf with a 175 mm magnet surface and clears chips instantly via a pull‑out pin in the handle — ideal for keeping machines running and maintenance brief. Order this tool directly through Metav Werkzeuge or consult our specialists for application advice. Chip collector, magnetic (magnet surface 175 mm, total length 390 mm) – TECWERK The Chip collector, magnetic (magnet surface 175 mm, total length 390 mm) is a shielded, magnetic swarf collector designed for efficient removal of ferrous debris from machines, workbenches and confined areas Magnetic with protective shield Attracts all ferrous swarf Quick release via pull-out pin Magnet surface length 175 mm Efficient ferrous swarf collection for machine shops The TECWERK chip collector combines a magnetic bar with a protective shield to capture and retain metallic chips where they are generated. The 175 mm magnet surface provides an extended active area that concentrates magnetic force across a useful span, enabling rapid collection of filings, turnings and loose iron particulates. For production environments this translates into fewer stoppages for manual cleaning and a lower risk of stray ferrous debris causing tool damage or quality issues. The term ferrous refers to materials that contain iron and are therefore attracted to a magnet, which explains why non‑magnetic alloys and most stainless grades are not captured by this device. Rapid, safe clearing that reduces maintenance time A purposeful pull‑out pin in the handle releases accumulated swarf in a single motion: by withdrawing the pin the magnetic bar lets go and the collected chips fall away into a bin or tray. This mechanism eliminates fiddly scraping and avoids contact with sharp turnings, improving operator safety and shortening cleaning cycles. The simple mechanical action requires no power and minimal training, delivering a reliable time saving per shift that adds up across the workshop. Robust, compact design for everyday industrial use The shielded construction protects the magnet from heavy contamination while providing a compact footprint for use on lathes, CNC machines and under benches. The stated total length of 390 mm balances reach and manoeuvrability, making the tool suitable for tight spaces as well as routine bench work. Built for repetitive use, the collector’s materials and finish support durability in regular industrial settings, ensuring a consistent magnetic performance and prolonged service life with straightforward handling. For reliable ferrous swarf handling choose the TECWERK magnetic chip collector and contact Metav Werkzeuge in Emmerich for procurement or tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832992NW Product type: Chip collector Execution: magnetic with protective shield Packaging unit: 1 Specifications Magnet surface length: 175 mm Total length: 390 mm SKU: 4000832992NW Features Magnetised bar with protective shield Attracts magnetic (ferrous) materials Quick‑release via pull‑out pin in handle Compact design for machine and bench use FAQ How does the magnetic collector remove chips? The collector uses a magnetic bar to attract ferrous swarf; by pulling the handle pin the magnet releases and the chips fall off for disposal. Is the tool suitable for stainless steel filings? Only magnetic grades are captured; stainless types that are non‑magnetic will not be attracted by the magnetic collector. What is the active magnetic length? The magnet surface measures 175 mm, offering a broad collection area for efficient clearing. Can the collector be used on a lathe or mill? Yes, the compact, shielded design makes the collector suitable for use at lathes, milling machines and workbenches to keep work areas clear. How is debris disposed of after collection? Debris is released by withdrawing the pull‑out pin; the collected swarf drops into a bin or tray for straightforward disposal. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
176mm Live Centre Rotating For High Speeds, Accuracy 0.005 - Vertex
Take advantage of precise runout control and high‑speed capability to improve surface finish and reduce rework. Benefit from the combination of recognised Vertex manufacturing and Metav Werkzeuge’s reliable supply – order directly via Metav Werkzeuge or consult the Metav team for technical guidance. Vertex live centre MT3A – high‑speed rotating centre with 0.005 mm runout The Vertex live centre MT3A is a lathe accessory designed to support rotating workpieces at elevated spindle speeds, offering precise support for turning operations and reduced vibration in demanding production environments. High-speed rotation up to 4,000 r.p.m Precision runout 0.005 mm Morse taper MT3A interface Length 176 mm, weight 1.3 kg Consistent precision for improved component quality The primary advantage of this live centre is its focus on precision: with a measured runout 0.005 mm, the centre minimises radial error at the tailstock end, which directly improves concentricity and surface finish during turning. Reduced runout means less corrective machining and fewer rejected parts, supporting predictable cycle times. The specification for accuracy is particularly relevant in serial production and jobbing shops where repeatability influences downstream processes; the compact, engineered bearing assembly within the centre ensures this level of performance without complex setup procedures. Built for high‑speed turning and smoother machining Designed as a high‑speed rotating centre, the unit sustains operation up to 4,000 r.p.m., allowing higher cutting speeds and optimised material removal rates on modern lathes. The Morse taper MT3A interface provides straightforward mounting and secure seating in the tailstock, while the live rotation reduces tool chatter and promotes low vibration conditions. For materials and cycle types that benefit from increased spindle speed, the rotating support provided by the centre helps maintain dimensional stability and extends tool life through steadier cutting conditions. Compatibility, handling and workshop integration The compact form‑factor (length 176 mm; weight 1.3 kg) and standard taper make the centre easy to integrate into existing setups without additional adapters. As a robust lathe accessory, it is suitable for everyday workshop use and for operators who require reliable workpiece support during prolonged runs. For less experienced staff, the concept of a live centre is simple: the rotating tip follows the workpiece rotation, eliminating the sliding friction seen with fixed centres and thereby reducing heat and wear at the contact point. This tangible operational benefit improves both efficiency and safety at the machine. For reliable high‑speed support and workshop compatibility, choose the Vertex live centre MT3A and contact Metav Werkzeuge for ordering or tailored technical advice: Metav Werkzeuge, Parkring 45, 46446 Emmerich; info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VLC-MT3A GTIN: 4061905083594 Type: MT3A Designation: Live centre Brand: Vertex Facts Length: 176 mm Weight: 1.3 kg Accuracy (runout): 0.005 mm Max speed: 4,000 r.p.m Angle: 60° Special features Live rotating centre for high speeds Morse taper MT3A Suitable for lathe turning applications FAQ What maximum spindle speed is supported by this live centre? The live centre supports operation up to 4,000 r.p.m., allowing higher cutting speeds for compatible turning operations. How does a 0.005 mm runout affect machining results? A runout of 0.005 mm reduces radial error and vibration, improving surface finish and dimensional accuracy compared with centres that have higher runout. Is the MT3A taper compatible with standard tailstocks? Yes, the Morse taper MT3A is a common interface and fits tailstocks or adaptors designed for an MT3 taper. Can the centre be used for long production runs? The Vertex live centre is designed for routine workshop use and sustained operation, offering robust support for serial turning tasks. What advantages does a rotating centre offer over a fixed centre? A rotating (live) centre reduces sliding friction and heat at the contact point, lowering wear and promoting steadier cutting conditions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
180mm Tool Holder For Steel Holder Head D1 For Turning Bars 40mm Clamping Height - TECWERK
Taking advantage of the holder’s 40 mm clamping height and 180 mm overall length ensures stable tool positioning and reduced setup times in turning operations; for procurement or detailed fit checks, order via Metav Werkzeuge or consult the technical team for compatibility guidance. TECWERK Interchangeable Holder for steel holder head D1 — 40 mm clamping height, 180 mm overall length The TECWERK Interchangeable Holder for steel holder head D1 secures turning tools in quick‑change tool posts, providing consistent tool height and reliable repeatability for workshop and production environments. Quick-change holder for turning tools 40 mm clamping height for consistent tool position 180 mm overall length for stable overhang Compatible with steel holder head D1 Precise, repeatable clamping reduces setup time and scrap A defined 40 mm clamping height guarantees a reproducible tool centre relative to the workpiece, which simplifies alignment after tool changes and minimises rework. The holder’s geometry is designed to deliver repeatable clamping for turning operations, so cycle time is reduced through faster setups. For production runs where consistency matters, the controlled tool height translates into fewer adjustments and improved first‑pass yield, supporting lean workflows and predictable part quality. Stable overhang and robust feel for vibration control With a 180 mm overall length, the component balances accessibility to the cutting zone with sufficient rigidity to keep chatter under control. The extended length provides a beneficial reach while the construction supports axial and radial stability during cuts. By reducing vibration at the tool tip, the holder helps maintain surface finish and tool life, which in turn lowers operating costs and preserves downstream processes that rely on accurate contours. Seamless integration with D1 steel holder heads Designed explicitly for the steel holder head D1, this interchangeable unit fits established quick‑change systems without the need for additional adapters. Compatibility with the D1 standard saves time during retrofits and prevents unnecessary retooling expenses. The result is a compact clamping solution that suits both single‑machine shops and high‑mix production, allowing machines to be reconfigured swiftly while keeping datum points consistent. Practical advantages for workshops and production lines The quick‑change concept supports flexible tool management: fewer dedicated tool posts are required, and reconfiguration becomes a matter of minutes rather than hours. This holder is aimed at machinists and maintenance planners who prioritise uptime and predictable performance; its simple interface with D1 heads streamlines inventory and reduces the variety of spare parts needed on the shelf. Combined with Metav’s distribution and advice, the product is positioned to support both occasional users and continuous manufacturing environments. For technical verification or to check suitability for a specific turning setup, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt consultation and ordering assistance. Technical data SKU: 2000832161NW Article: Interchangeable holder for steel holder head D1 Manufacturer: TECWERK Facts Overall length: 180 mm Clamping height (A): 40 mm Packaging unit: 1 UID: 2000832161NW Special features For turning tools Compatible with steel holder head D1 Quick‑change/interchangeable holder Application: lathe/turning operations FAQ What does the 40 mm clamping height mean for setup? The 40 mm clamping height defines the tool centre relative to the spindle axis; with the TECWERK interchangeable holder this height delivers reproducible positioning, reducing alignment time after tool changes. Is the holder compatible with other quick‑change systems? The unit is engineered for the steel holder head D1; compatibility with other systems depends on their interface—adaptation may be required for non‑D1 standards. How does the 180 mm overall length affect machining? A 180 mm overall length provides increased reach while maintaining sufficient rigidity to reduce vibration, improving surface finish and tool life during turning. Are material specifications available for the holder? Material information is not specified in the provided data; for detailed composition and heat‑treatment data, please request the technical datasheet from the supplier. Can this holder improve tool change times on small batches? Yes, the quick‑change design shortens tool swaps and helps maintain consistent tool height, which is especially beneficial for high‑mix or small‑batch production where frequent changes are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
180mm Toolholder for Steel Holder Head D1 With 50mm Mounting Height - TECWERK
Take advantage of a compact combination of precise clamping, standardised dimensions and straightforward compatibility to reduce setup time and maintain consistent turning results; order the interchangeable holder directly via Metav Werkzeuge or ask our consultants if technical advice is required. Interchangeable holder for steel holder head D1 – for turning bars, 50 mm clamping height (TECWERK) The Interchangeable holder for steel holder head D1 is a precision toolholder designed for workshop and industrial turning operations, offering a 50 mm clamping height and a standardised total length for reliable tool set-up. For steel holder head D1 Clamping height 50 mm Total length 180 mm Designed for turning bars Faster set-up through standardised clamping geometry The holder provides a consistent, repeatable clamping height of 50 mm, which simplifies tool changeover and reduces machine downtime. Because the unit matches the common D1 steel holder head interface, it eliminates ambiguity in tool selection and supports predictable machining set-ups. This direct compatibility shortens preparation time, improves process stability and helps maintain consistent cutting conditions across shifts. Predictable machining with defined overall dimensions With a total length of 180 mm and a clearly defined interface, the component supports precise positioning and reliable tool projection. The defined geometry assists in calculating cutting forces and clearances, and the standardised dimensions allow straightforward integration into existing tool systems. Clear numeric values enable planning of tool offsets and collision checks, which contributes to safer and more efficient lathe operation. Robust design for industrial turning applications Manufactured for use with turning bars, the holder focuses on mechanical stability and repeatable clamping to withstand routine workshop stresses. The solid construction reduces vibration at the cutting edge and supports consistent surface finish and tool life. For operations that demand steady performance, the component’s engineered fit and secure interface with the steel holder head ensure dependable machining results. Suitable applications and practical advantages Intended for lathe and turning-tool workflows, the holder is appropriate where a fixed clamping height and reliable mechanical interface are required. The straightforward design means fewer variables during set-up, making it suitable for series production and mixed-batch work. The practical benefit is a reduction in set-up errors and a more efficient changeover routine, which together improve overall shop-floor productivity. Contact Metav Werkzeuge for detailed advice on integrating this TECWERK interchangeable holder into existing tool systems and to arrange supply from our Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832162NW SKU: 2000832162NW Facts Total length: 180 mm Clamping height: 50 mm Packaging unit: 1 Special features Suitable for steel holder head D1 Execution: for turning bars Product type: Interchangeable holder Brand: TECWERK UID: 2000832162NW FAQ Is this holder compatible with standard D1 steel holder heads? Yes. The interchangeable holder is made to fit the D1 steel holder head interface and is specified for use with that type of holder in turning applications. What is the clamping height and why does it matter? The device features a clamping height of 50 mm, which ensures consistent tool tip height and simplifies set-up of tool offsets and cutting parameters in lathe operations. Can the holder be used for different turning bars? The holder is executed specifically for turning bars and provides a fixed mechanical interface; variation in bar geometry should be checked against the holder’s dimensions before use. Does the total length affect machine clearance? Yes. The total length of 180 mm should be considered when calculating overhang and clearance to avoid collisions and to ensure correct tool projection. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
188mm Universal Centre Tip Running, 0.005mm Accuracy, Alloy Steel, 1800 rpm - Vertex
Take advantage of the combination of high rotational capacity, fine runout accuracy and robust alloy construction to ensure reliable support of rotating workpieces. Benefit from reduced rework and consistent concentricity by specifying the live centre from Vertex; order directly via Metav Werkzeuge or consult our technical advisors for application guidance. VPC-MT4 Universal live centre — alloy steel, 0.005 mm accuracy (Vertex) The VPC-MT4 is a universal live centre engineered to support rotating workpieces in lathes and turning centres, combining compact dimensions with stable running for general workshop and toolroom turning operations. High precision 0.005 mm runout accuracy Alloy steel construction for robust duty Operates up to 1800 r.p.m. reliably Compact 188 mm length, 1.3 kg weight Proven accuracy for consistent turning results The live support delivers a verified runout of 0.005 mm, which translates into measurably improved concentricity and fewer scrap parts. This level of precision is achieved through a balanced spindle and careful bearing selection, so that the applied clamping forces are transmitted with minimal deflection. For production runs where repeatability matters, the fine runout reduces the need for secondary turning passes and inspection overhead. The explained tolerance gives purchasing and production planners a verifiable specification to compare against alternative support centres. Robust material and dependable rotational performance Constructed from alloy steel, the centre is built for sustained workshop use and resists deformation under normal machining loads. Rated for continuous operation up to 1800 r.p.m., the component maintains stability across common turning speeds while its 188 mm compact length and 1.3 kg mass aid in rapid mounting and repositioning. The material choice provides a balance between hardness and toughness, offering wear resistance where contact occurs yet avoiding brittleness that can reduce service life. Where higher surface integrity is required, the robust construction contributes directly to consistent workpiece finish. Seamless integration and practical benefits for the workshop Designed as a live-running support, the centre fits conventional lathe tailstocks and is suitable for a wide range of turning tasks in general metalworking and toolroom environments. The spindle arrangement ensures smooth rotation of the workpiece, reducing chatter and enabling steadier machining at intermittent feed rates. Documentation and identification via the SKU support procurement processes, while the clear technical parameters allow engineers to plan cycles and tool offsets with confidence. As a Vertex product, the unit benefits from established manufacturing practices and traceability, which supports quality control and long-term parts replacement planning. Contact Metav Werkzeuge for tailored specification advice on the Vertex VPC-MT4 universal live centre or to arrange delivery from our Emmerich warehouse and technical consultation Technical data Article number: VPC-MT4 GTIN: 4061905085840 Manufacturer: Vertex Facts Accuracy: 0.005 mm Max speed: 1800 r.p.m. Weight: 1.3 kg Length: 188 mm Materials & special features Material: alloy steel Live-running centre design ECLASS: 21022304 FAQ What level of runout can be expected from this live centre? The specified runout is 0.005 mm for the Vertex VPC-MT4 universal live centre, providing the precise concentricity required for repeatable turning operations. Is the centre suitable for high-speed turning applications? The support is rated to 1800 r.p.m., making the VPC-MT4 appropriate for typical lathe speeds encountered in general workshop and toolroom work. Which material is the body made from and what does that imply? The body is manufactured from alloy steel; this offers a robust balance of wear resistance and toughness for sustained workshop use. Can the live centre be used across different lathes and tailstocks? The live-running design is compatible with conventional tailstock arrangements and is intended for broad use in turning support roles. How does this product support quality assurance in production? By delivering consistent runout and stable rotation, the VPC-MT4 reduces rework and inspection effort, aiding process control and part repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18mm Centre Drill Type 665 MK2 60° Full Tip 100mm Shank DIN 806 - RÖHM
Take advantage of the 60° geometry and full point design together with a hardened, ground construction for consistent centring and long service life — procure the unit via Metav Werkzeuge or consult our specialists for application advice. Centre point Type 665 MK2 — 60° solid point with MK2 taper by RÖHM The Centre point Type 665 MK2 is a fixed centre for tailstock applications, providing a precise 60° solid point for repeatable workpiece alignment in conventional metalworking operations DIN 806 hardened and ground 60° solid centre point geometry Tool-steel construction for durability MK2 taper with 100 mm overall length Accurate centring for repeatable machining results The standard 60° tip angle follows DIN 806, which ensures consistent engagement with conventional centre holes and compatible centres in chucks and centres. The full point tip reduces the lateral slippage that causes run-out, so concentricity is improved during turning and drilling operations. Because the point is hardened and ground, the contact surface resists deformation under load, maintaining centre accuracy over longer production runs and reducing the need for frequent rework. Built for workshop durability and stable mounting Constructed from tool steel and fully finished by hardening and precision grinding, the assembly resists wear from repeated contact with workpieces. The MK2 taper provides a secure fit in commonly used tailstocks and adaptors, while the 100 mm overall length and 36 mm projection give a balanced combination of reach and support. This robust specification translates into fewer interruptions for maintenance and a reduced risk of tip damage during normal lathe operations. Simple compatibility and straightforward handling The taper and dimensions follow established standards, easing integration into existing equipment. The MK2 interface makes mounting and replacement fast, which limits machine downtime and simplifies tooling logistics on the shop floor. The compact projection and standard diameter also allow stable support for light to medium turning and centring tasks, enabling reliable performance without complex set-up procedures. For procurement or detailed suitability checks of the RÖHM Centre point Type 665 MK2, contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich facility at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4121011129NW Type: 665 Brand: RÖHM Product: Centre point Core dimensions Diameter: 18 mm Overall length: 100 mm Projection: 36 mm Tip angle: 60° Packaging unit: 1 Materials & features Tool steel Fully hardened and ground DIN 806 compliant Full point (solid tip) MK2 taper FAQ What is the tip angle and why does it matter? The tip angle is 60°, which is the standard geometry for centring; the 60° point on the RÖHM centre point Type 665 MK2 ensures reliable engagement in conventional centre holes and reduces run-out during turning. Is the centre point compatible with standard tailstocks? Yes, the MK2 taper provides compatibility with most conventional tailstocks and adaptors designed for Morse taper 2 fittings. How durable is the contact area of this centre point? The contact area is hardened and ground, which increases wear resistance and preserves accuracy under repeated use compared with untreated tips. What lengths and projections are provided? This variant offers a 100 mm overall length with a 36 mm projection, balancing reach and support for typical workshop centring tasks. Does the product follow recognised standards? The design conforms to DIN 806, which standardises the geometry and finishing quality expected from a precision centre point. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Clamping Screw M5 5mm Square For Changeable Holder, 18mm Length - TECWERK
Combining a secure M5 thread with a 5 mm square drive and an 18 mm overall length, this clamping screw delivers dependable retention in TECWERK quick-change holders while keeping downtimes low. Order replacement parts directly via Metav Werkzeuge or consult the advisors for compatibility and stock information. TECWERK Clamping Screw AA – M5 thread, 18 mm, 5 mm square drive A TECWERK clamping screw AA intended as a spare part for quick-change turning tool holders, engineered to provide precise axial fixation in compact assemblies. Replacement part for TECWERK quick-change holders M5 thread for standardised clamping 18 mm overall length for compact assemblies 5 mm square drive for secure torque input Secure retention that reduces machine downtime The clamping screw is designed for straightforward replacement in quick-change systems, delivering consistent axial fixation that safeguards insert alignment and cutting stability. With its M5 thread and compact geometry, the fastener keeps clamping forces reliable across repeated tool changes, which translates into fewer stoppages and a more predictable production rhythm. The clearly defined mechanical interface lowers the risk of misfits and helps maintain machining accuracy. Standardised interface for easy compatibility checks Featuring a standard M5 pitch and a 5 mm square drive, the part matches common clamping interfaces used in quick-change tool holders. These measurable characteristics simplify procurement and inventory management: the thread designation and square drive are immediately verifiable, so replacement planning becomes a matter of matching specifications rather than guesswork. The result is faster reassembly and reduced setup times on the shop floor. Compact form for tight assemblies and reliable handling At 18 mm overall length, the component suits compact toolholders where axial space is limited. The square drive provides a positive engagement for tightening tools and helps ensure torque is transmitted without slippage during installation or removal. As a spare part tailored to quick-change systems, the fastener supports repeatable clamping performance and contributes to consistent tool life when used within its specified interface. Supply reliability and expert support for workshop planners Metav Werkzeuge supplies this spare as part of a broad portfolio that streamlines ordering and reduces supplier complexity. Backed by a substantial product range and industrial experience, Metav enables reliable stock replenishment and offers technical guidance for compatibility decisions. For workshops seeking a blend of availability and trusted standards, this replacement component integrates into established toolholder systems with minimal administrative effort. Request this TECWERK spare via Metav Werkzeuge for assured compatibility and fast supply; technical enquiries and availability checks can be directed to Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832426NW Label: Spannschraube Größe=AA M5 L.18mm 4-KT.5mm z.Wechselhalter TECWERK Brand: TECWERK Product type: Clamping screw Type: AA Facts Thread: M5 Overall length: 18 mm Square drive: 5 mm Packaging unit: 1 Special features Spare part for TECWERK quick-change holder for turning tool inserts and with prism Axite enrichment: Ersatzteil zu TECWERK Wechselhalter für Drehstähle und mit Prisma UID: 2000832426NW FAQ Is this clamping screw compatible with TECWERK quick-change holders? Yes. The clamping screw is specified as a replacement part for TECWERK quick-change holders and matches the interface used for turning tool inserts. What are the key dimensions and drive type? The component has an M5 thread, an overall length of 18 mm and a 5 mm square drive, which together define the mechanical connection and torque input method. Can the screw be used in compact toolholder assemblies? Yes. With its 18 mm overall length and compact profile, the screw is suitable for tight axial spaces in quick-change systems while maintaining secure fixation. How should compatibility be verified before ordering? Verify the thread (M5), the square drive size (5 mm) and the overall length (18 mm) against the toolholder specifications; the SKU 2000832426NW can be referenced for exact matching. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Block Jaw Set Unstepped Unhardened 3 Pieces - RÖHM
Take advantage of a robust clamping solution that combines compatibility with 200 mm chucks, a customisable unstepped jaw design and a three-piece configuration for complete jaw coverage; order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Block jaw set — RÖHM, for 200 mm chuck, unstepped design The Block jaw set is designed for external clamping on lathes and machining centres with a 200 mm chuck diameter, providing a flexible basis for custom jaw machining and secure part holding. Fits chuck Ø 200 mm Unstepped block jaw design Three-piece set for full chuck coverage Reliable clamping for consistent production quality The set offers a straightforward solution for external clamping needs on chucks with a 200 mm diameter. The unstepped jaw profile is supplied in a soft, unmachined state so that the clamping surfaces can be tailored precisely to the workpiece. This approach improves repeatability and reduces set-up iterations because the jaws can be machined to match exact part contours, ensuring contact over the intended gripping surface rather than relying on generic contours. Clear compatibility reduces uncertainty at the selection stage and supports efficient batch processing. Flexible machining for bespoke component support Delivered as a three-piece pack, the components enable full coverage of standard three-jaw chucks and simplify balancing and alignment during installation. The unstepped design permits bespoke machining on a lathe or milling fixture so that a single jaw set can serve multiple part families when re-profiled. The resulting adaptability translates into lower tooling inventory and faster changeovers, which benefits job shops and in-house production lines seeking versatile clamping options without compromising on process control. Practical handling and installation benefits Each jaw is shaped for secure seating in the chuck and for straightforward machining; the simple geometry reduces machining time and makes it easier to verify datum references once the custom profile is created. Because the set is specified for a 200 mm chuck, selection is immediate for compatible chucks and adapters; this clarity prevents mismatched ordering and minimises downtime. The compact pack also supports orderly storage and traceability in the tooling cabinet, streamlining workshop logistics. Material neutrality and application scope The product description does not specify base material or heat treatment, so the set is presented as a universal, machinable option suitable wherever custom jaw contours are required. The design is especially useful when parts demand precise contact zones or when off-the-shelf hardened jaws would not provide the required geometry. For users seeking ready-to-run hardened solutions, alternative jaw types remain available, while this set prioritises versatility and economical customisation. For tailored jaw fitting and availability for RÖHM block jaws, contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com for specific advice and delivery options. Technical data Article number: 4121270200NW Label: Block jaw set for chuck Ø 200 mm, unstepped, 3 pieces per set Brand: RÖHM Facts Chuck diameter: 200 mm Pieces per set: 3 Packaging unit: 1 Special features Unstepped design for custom machining External clamping application Supplied as a three-piece set for three-jaw chucks FAQ What chuck size is this jaw set compatible with? The RÖHM block jaw set is specified for use with chucks of 200 mm diameter and fits standard three-jaw configurations. Can the unstepped jaws be machined to a custom profile? Yes, the unstepped condition allows machining of bespoke gripping profiles so that the jaws can be finished to match the part geometry. Is the base material or hardness specified for the jaws? The available data for this RÖHM block jaw set does not state material or hardness; the parts are provided in an unstepped form intended for subsequent machining. How does a three-piece set benefit a workshop? A three-piece configuration covers the complete circumference of a three-jaw chuck, aiding balance, simplifying alignment and enabling consistent repeatability across mounted workpieces. What is the article number for ordering or reference? The article number for this RÖHM block jaw set is 4121270200NW, which should be quoted for precise ordering and stock enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com