5 MP Digital Microscope Semi-Plan 4x/10x/S40x 2560 x 1920, USB 2.0 - Euromex
Take advantage of the combination of high-resolution imaging, a precise mechanical X–Y stage and integrated LED illumination for dependable laboratory or inspection workflows; order the equipment via Metav Werkzeuge or consult our technical advisors for tailored guidance. BioBlue BB.4225 digital microscope — 5 MP camera, Semi‑Plan objectives by Euromex The BioBlue BB.4225 is a digital upright microscope designed for laboratory imaging, quality control and educational use, combining a high-resolution camera with a mechanical X–Y stage for repeatable sample positioning. 5 MP camera, 2560 x 1920 pixel resolution Semi‑Plan objective set 4x / 10x / S40x Integrated mechanical X‑Y stage 1 W LED illumination and 24‑bit colour depth Enhanced detail for reliable documentation The digital imaging system centres on a 5 MP sensor delivering 2560 x 1920 pixels, driven by a CMOS 1/2.8 inch sensor that captures clear images at up to 30 fps under optimal conditions. This combination reduces image noise and improves detail recognition, which is particularly useful for material inspection, biological samples and component analysis. The high pixel count ensures measurements and annotations are based on sharp, verifiable visual data, supporting traceable documentation in laboratory protocols. Consistent sample handling for repeatable results A built‑in mechanical X‑Y stage enables precise, incremental sample movement and repeatable positioning across inspection cycles. The robust stage supports comparative imaging, stitch captures and systematic scanning without the need for external fixtures. For users performing dimensional checks or serial inspections, the integrated stage minimises repositioning error and streamlines workflow, ensuring comparable results between operators and over time. Optical quality and stable illumination for true colour rendering Optical performance is provided by Semi‑Plan objectives (4x / 10x / S40x) that deliver flat-field images with minimal peripheral distortion, supporting accurate visual assessment across the field of view. Paired with a 1 W LED light source, the system offers uniform, long‑life illumination that maintains colour constancy and reduces thermal effects on sensitive specimens. The monocular configuration and lightweight design contribute to focused, ergonomic use in bench and classroom environments. Seamless capture and analysis for efficient reporting Data transfer and image control are facilitated via USB 2.0, while the included ImageFocus Plus software enables capture, measurement and basic image processing without complex integration. The camera provides 24‑bit colour output, making it straightforward to export images for reports or to feed inspection databases. This combination of hardware and software supports quick onboarding for technicians and simplifies the handover from capture to results, reducing time-to-report in routine quality checks. For tailored advice on integrating the Euromex digital microscope into existing workflows, contact Metav Werkzeuge in Emmerich for product consultancy and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: BB.4225 SKU: BB.4225 Manufacturer: Euromex Product type: Digital microscope Model series: BioBlue Label: BioBlue BB.4225 Facts Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8 inch Frame rate: max. 30 fps Illumination: 1 W LED Weight: 3.4 kg Special features Semi‑Plan objectives 4x / 10x / S40x Integrated mechanical X‑Y stage Monocular head Software: ImageFocus Plus Connection: USB 2.0 24‑bit colour camera Accessories listed on Euromex digital family accessory list (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) FAQ What imaging performance can be expected from the BioBlue BB.4225? The BioBlue BB.4225 delivers 5 MP stills at 2560 x 1920 pixels and can record at up to 30 fps under optimal conditions, providing detailed images suitable for inspection and documentation. Is the microscope suitable for repeated comparative inspections? Yes, the integrated mechanical X‑Y stage supports precise repositioning for repeatable comparative imaging, which is ideal for serial inspection and quality control processes. Which objectives are supplied and what benefit do they offer? The microscope includes Semi‑Plan objectives (4x, 10x and S40x) that provide a flat field and reduced edge distortion, improving visual assessment across the entire field of view. Can images be exported for reporting and analysis? Images from the BioBlue BB.4225 can be transferred via USB 2.0 and managed with ImageFocus Plus, enabling measurement, basic processing and export for reporting workflows. Is the illumination adequate for sensitive samples and long sessions? The system uses a 1 W LED light source which offers consistent, low‑heat illumination and reliable colour rendering for extended observation and documentation sessions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi-Plan Lenses NeoLED Illumination, CMOS 2560 x 1920 USB - Euromex
Benefit from precise documentation and a reliable workflow: the 5 MP sensor with 2560 x 1920 pixel resolution, combined with NeoLED illumination and an integrated mechanical X‑Y stage, delivers consistent images and accurate sample positioning for inspection and teaching environments. Order the BioBlue BB.4267 directly via Metav Werkzeuge or ask our consultants if needed. BioBlue BB.4267 Digital microscope — 5 MP sensor, NeoLED illumination (Euromex) The BioBlue BB.4267 is a digital upright microscope designed for laboratory inspection, quality control and routine documentation tasks, combining high-resolution imaging with practical sample handling. 5 MP CMOS sensor, 2560 x 1920 pixels NeoLED illumination for consistent imaging Semi‑Plan objectives 4x/10x/S40x/S100x Integrated mechanical X‑Y stage, precise positioning Consistent high‑resolution images for clear documentation The combination of a 5 MP camera and a CMOS 1/2.8 inch sensor produces 2560 x 1920 pixel captures that are suitable for traceable documentation and visual inspection. Because the camera provides 24‑bit colour, images retain accurate colour rendition for reports and comparisons, while the max. 30 fps frame rate ensures smooth live viewing under normal operating conditions. These measurable properties reduce retakes and speed up image-based decision making, making the system a dependable option for routine lab work and incoming inspection. Optical versatility that adapts to varied sample types Equipped with Semi‑Plan 4x / 10x / S40x / S100x objectives and a binocular head, the instrument offers optical options for both overview and fine-detail work. The Semi‑Plan designation indicates field-flattening correction across the field of view, which improves edge sharpness and measurement reliability on flat samples. This optical flexibility supports tasks from component inspection to educational demonstrations, providing clear benefits where both overview and detail are required without changing platforms. Integrated handling and software for efficient workflows A built-in mechanical X‑Y stage enables precise sample positioning and repeatable scanning without external fixtures, accelerating routine measurements and image capture sequences. Digital connectivity via USB 2.0 and the bundled ImageFocus Plus software allow straightforward image transfer and basic measurement routines, streamlining documentation processes. At 4.1 kg, the unit is stable on a bench yet portable enough for reorganisation within a workshop. Accessories compatible with the digital model family are listed by Euromex; please consult the official accessory list and the listed restrictions when planning extensions. Discuss the Euromex BioBlue BB.4267 with Metav Werkzeuge for expert advice on matching NeoLED imaging to specific inspection tasks and secure reliable supply from Emmerich—contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BB.4267 SKU: BB.4267 Manufacturer: Euromex Product type: Digital microscope Model series: BioBlue Facts Resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8 inch Frame rate: max. 30 fps Weight: 4.1 kg Connection: USB 2.0 Digital: true Special features Illumination: NeoLED Lens system: Semi‑Plan 4x / 10x / S40x / S100x Microscope head: Binocular Stage: Integrated mechanical X‑Y stage Camera: 24‑bit colour Software: ImageFocus Plus Accessories: See Euromex accessory list (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) FAQ What image resolution and colour depth does the system provide? The BioBlue BB.4267 captures at 5 MP with a pixel resolution of 2560 x 1920 and records in 24‑bit colour, ensuring detailed and colour‑accurate images for documentation. Which objectives are included and what do they support? The instrument uses Semi‑Plan 4x, 10x, S40x and S100x objectives; these deliver a flat field across the image and support both overview inspections and high‑detail observations. Can images be exported directly to a PC? Yes, the digital camera connects via USB 2.0 and works with ImageFocus Plus for capture and basic measurements, enabling fast file transfer and straightforward documentation. Is the stage suitable for precise sample positioning? The integrated mechanical X‑Y stage provides repeatable, fine positioning for inspection tasks and is particularly useful when documenting multiple regions on a single specimen. Are additional accessories available for the digital model family? Compatible accessories are listed on the official Euromex accessory list; consult the items referenced for the digital model family and observe any specified limitations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi‑Plan 4x/10x/S40x 2560 x 1920, 1 W LED, USB 2.0 - Euromex
Take advantage of the 5 MP sensor and versatile Semi‑Plan objective set for sharp inspection images and reliable documentation; combine precise optics with USB 2.0 connectivity and ImageFocus Plus for a streamlined imaging workflow. Order the BioBlue BB.4205 directly via Metav Werkzeuge or ask our consultants for integration advice. BioBlue BB.4205 — Digital microscope with 5 MP sensor and Semi‑Plan optics The BioBlue BB.4205 is a digital microscope designed for upright sample observation and digital documentation in laboratories and inspection environments. 5 MP sensor, 2560 x 1920 pixel resolution Semi‑Plan objective set 4x / 10x / S40x CMOS 1/2.8‑inch sensor with 24‑bit colour 1 W LED illumination for consistent lighting USB 2.0 connectivity and ImageFocus Plus software High‑resolution imaging for accurate inspection results The integrated 5 MP camera delivers 2560 x 1920 pixel captures on a CMOS 1/2.8‑inch sensor, providing detailed images for documentation and basic measurement tasks. With a 24-bit colour depth of 24‑bit, subtle contrasts and colour gradations are retained, which supports clearer defect recognition and traceability. A maximum of 30 fps ensures smooth live view for positioning and rapid evaluation. These specifications reduce the need for repeated captures and help maintain steady throughput in routine inspection work. Optics and lighting that improve image consistency Equipped with a Semi‑Plan objective set (4x / 10x / S40x), the system offers a flat field across most of the image area, limiting edge softening common to basic lenses. This optical design provides uniform sharpness across the field, which benefits measurement tasks and image stitching. Paired with a 1 W LED light source, the setup yields stable, cool illumination that minimises thermal drift and sample heating while delivering reproducible results under repeated inspections. Connectivity and software for efficient documentation workflows The microscope connects via USB 2.0, allowing reliable image transfer to workstations and compatibility with common imaging setups. Supplied with ImageFocus Plus, the solution supports live capture, basic measurement routines and export to standard formats for reporting. The software integration simplifies archiving and quick comparison of specimens, reducing administrative time and supporting a rational, auditable inspection process. Robust, compact design for routine laboratory use The unit is configured with a monocular head and a compact form factor, weighing 2.9 kg, which eases handling and bench integration without compromising stability. Compatibility with a range of manufacturer‑listed accessories extends functionality for specific tasks, such as specialised stands or illumination options. The construction is intended for repeated daily use in laboratory and light industrial environments where dependable imaging and simple operation are priorities. Contact Metav Werkzeuge for tailored advice on integrating the BioBlue BB.4205 into existing inspection workflows and for transparent, reliable supply from Emmerich. Technical data Article number: BB.4205 Product type: Digital microscope Model series: BioBlue Manufacturer: Euromex Label / SKU: BB.4205 Facts Resolution: 5 MP (2560 x 1920 pixels) Sensor: CMOS 1/2.8‑inch Frame rate: max. 30 fps Weight: 2.9 kg Illumination: 1 W LED Features Semi‑Plan 4x / 10x / S40x objective set Monocular head 24‑bit colour camera USB 2.0 connection ImageFocus Plus software Compatible accessories listed by manufacturer: AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275 FAQ What image resolution and colour depth does the system provide? The BioBlue BB.4205 captures images at 5 MP (2560 x 1920) with 24‑bit colour depth, enabling detailed, colour‑accurate documentation for inspection and reporting. Which objectives are supplied and what benefits do they offer? The supplied Semi‑Plan objectives (4x / 10x / S40x) deliver a flatter image field and more consistent sharpness across the frame, improving measurement reliability and reducing rework caused by edge blur. Is the camera suitable for live observation and capture? Yes; the camera supports up to 30 fps under optimal conditions for smooth live viewing, and images are transferred via USB 2.0 for capture and archiving using ImageFocus Plus. Can the microscope be integrated into existing imaging setups? Integration is straightforward: the unit uses USB 2.0 connectivity and standard capture software workflows, and the ImageFocus Plus package facilitates export to common file formats for downstream analysis. Are there compatible accessories to extend functionality? Manufacturer‑listed accessories are available for specialised stands, illumination and adaptors; consult the accessory list (codes such as AE.5130, PB.5155 etc.) for compatible options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi‑Plan 4x/10x/S40x/S100x, 2560 x 1920 1 W LED, USB 2.0 - Euromex
Take advantage of a high‑resolution imaging chain and a mechanically precise specimen stage to speed inspection and documentation. The combination of a 5 MP sensor, Semi‑Plan objectives and an integrated X‑Y stage ensures clear images and repeatable positioning for routine laboratory, teaching and quality‑control tasks. Order the instrument directly via Metav Werkzeuge or contact their consultants for tailored advice. BioBlue BB.4255 — Digital microscope with 5 MP camera and integrated X‑Y stage (Euromex) The BioBlue BB.4255 is a compact digital microscope for routine laboratory inspection, teaching and quality‑control imaging, combining reliable optics with straightforward digital documentation. 5 MP camera 2560 x 1920 pixels Semi‑Plan objective set 4×–100× Integrated mechanical X‑Y stage Precise image capture for verifiable inspection The imaging chain is built around a 5 MP camera delivering 2560 x 1920 pixels on a CMOS 1/2.8" sensor, which provides sufficient resolution for routine inspection and documentation. At up to max. 30 fps, motion on a sample can be observed and recorded smoothly, while the 24‑bit colour output preserves colour fidelity for traceable visual records. This combination reduces rework by making defects easier to identify and document. Repeatable positioning for efficient workflows The integrated mechanical X‑Y stage allows controlled, stepwise scanning of a sample and ensures that positions can be revisited reliably, which is particularly valuable during quality control or comparison tasks. Paired with the Semi‑Plan objectives (4×, 10×, S40×, S100×), the arrangement supports both overview inspection and higher‑magnification checks without swapping instruments, saving time and maintaining alignment. Easy digital handling and compatibility with lab systems Data transfer is handled via USB 2.0 and images are managed with ImageFocus Plus, enabling straightforward capture, annotation and export into common file formats. The user interface of the supplied software simplifies routine documentation and reduces the time between observation and report generation. The 1 W LED illumination provides consistent, energy‑efficient lighting suitable for extended sessions. Robust design for daily laboratory use Built with a monocular head and practical ergonomics, the instrument weighs 3.4 kg and is easy to position on a bench or in a teaching environment. The optical design emphasises flat‑field performance for reliable image quality across the field of view, while the LED light source reduces maintenance compared with filament alternatives. The set‑up supports dependable everyday use with minimal downtime. For purchasing guidance or to discuss the Euromex BioBlue BB.4255 and its 5 MP imaging chain, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and procurement support. Technical data Article number: BB.4255 SKU: BB.4255 Manufacturer: Euromex Product type: Digital microscope Facts Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8" Max frame rate: max. 30 fps Illumination: 1 W LED Weight: 3.4 kg Special features Objective system: Semi‑Plan 4x / 10x / S40x / S100x Stage: Integrated mechanical X‑Y stage Head: Monocular Interface: USB 2.0 Software: ImageFocus Plus Camera colour depth: 24‑bit colour FAQ Is the camera suitable for documentation and basic image analysis? The camera in the BioBlue BB.4255 (Euromex digital microscope, SKU BB.4255) provides 5 MP resolution and 24‑bit colour, which is appropriate for documentation and many basic image‑analysis tasks when used with ImageFocus Plus. What magnification range is available with the supplied objectives? The system uses Semi‑Plan objectives with 4×, 10×, S40× and S100× settings, enabling both overview observations and higher‑magnification inspections on the same platform. Can the BB.4255 capture live video smoothly? Under optimal conditions the camera can output video at max. 30 fps, allowing real‑time observation and recording suitable for demonstrations or dynamic sample inspection. Is the illumination integrated and serviceable? The instrument includes an integrated 1 W LED light source that provides stable illumination with reduced maintenance compared with traditional lamps. Does the system support export to common file formats? Yes, images captured with the BioBlue BB.4255 can be managed and exported via ImageFocus Plus, which supports common export formats for reporting and archiving. Is the stage suitable for repeatable positioning? The integrated mechanical X‑Y stage provides controlled, repeatable specimen positioning, which improves efficiency for sequential inspections and comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi‑Plan Lenses, 2560 x 1920 Resolution, NeoLED Illumination - Euromex
The combination of a 5 MP camera and NeoLED illumination ensures high-contrast images for reliable documentation, while the integrated mechanical X‑Y stage and ImageFocus Plus software speed up measurement workflows. Order the Euromex unit directly via Metav Werkzeuge or consult our specialists for specification matching. BioBlue BB.4269 Digital microscope — 5 MP camera with NeoLED lighting (Euromex) The BioBlue BB.4269 is a benchtop digital microscope designed for visual inspection, documentation and routine measurement tasks in laboratories, quality control and educational environments. 5 MP camera, 2560 x 1920 resolution NeoLED illumination for consistent contrast Binocular head with ImageFocus Plus software Integrated mechanical X‑Y stage Precise imaging for dependable documentation and analysis The high‑resolution 5 MP sensor delivers 2560 x 1920 pixels and captures images in 24‑bit colour, allowing clear visual records suitable for reports and traceable documentation. The camera uses a CMOS 1/2.8" sensor, which balances light sensitivity and resolution for sharp results under variable sample conditions. With image capture at max. 30 fps, live inspection is fluid, reducing the need for repeat adjustments and enabling faster decision making in routine workflows. Faster inspection cycles through integrated mechanics and software Workflows benefit from the integrated X‑Y stage combined with ImageFocus Plus software; the stage provides controlled sample movement while the software supports capture, annotation and simple measurement routines. The USB 2.0 connection ensures straightforward data transfer to standard laboratory PCs and simplifies archiving. These features lower cycle times for repetitive tasks and help maintain consistent results across batches. Optical components engineered for repeatability and clarity Optical versatility is provided by Semi‑Plan objectives (4x, 10x, S40x, S60x) that reduce field curvature and improve flatness across the image, which is essential for comparative inspection and basic measurements. The binocular head offers ergonomic viewing for observation sessions and eases the transition between direct observation and digital capture. Semi‑Plan optics deliver a balance between wide, undistorted fields and sufficient magnification for detailed inspection. Built for everyday laboratory use and accessory adaptability At 4.1 kg, the instrument is compact enough for bench use while remaining stable during fine adjustments. The unit is listed with a range of approved accessories on the manufacturer’s accessory list (observe specified configurations and constraints), enabling adaptation for specific sample types or specialised tasks. The combination of robust illumination, clear optics and reliable imaging makes this model suitable for educational labs, routine QC and light analytical tasks where consistent visual data is required. For tailored advice on the Euromex BioBlue BB.4269 — including accessory compatibility and delivery from Metav Werkzeuge’s Emmerich stock — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: BB.4269 SKU: BB.4269 Manufacturer: Euromex Model series: BioBlue Product type: Digital microscope Facts Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8" sensor Frame rate: max. 30 fps Weight: 4.1 kg Special features NeoLED illumination Semi‑Plan 4x / 10x / S40x / S60x objectives Integrated mechanical X‑Y stage Binocular head ImageFocus Plus software USB 2.0 connection 24‑bit colour capture Digital microscope, ready for routine inspection FAQ What image resolution and colour depth does the system provide? The BioBlue BB.4269 records at 5 MP with 2560 x 1920 pixels and captures images in 24‑bit colour for accurate colour rendition. Can the microscope be used for basic measurements and documentation? Yes, the integrated mechanical X‑Y stage together with ImageFocus Plus enables repeatable sample positioning and straightforward measurement and documentation workflows. Which objectives are supplied and what optical benefits do they offer? Supplied options include Semi‑Plan objectives (4x, 10x, S40x, S60x); these reduce field curvature and provide flatter images across the field for more reliable inspection. Is live inspection smooth enough for practical laboratory use? With a CMOS 1/2.8" sensor and up to max. 30 fps, the system supports fluid live viewing suitable for routine inspection and sample alignment. What interface is used to transfer images to a PC? The unit uses USB 2.0 for data transfer, offering compatibility with standard laboratory computers and enabling quick image archiving. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Upright NeoLED Köhler Illumination, 2592 x 1944 CMOS - Euromex
Benefit from high-detail imaging and reliable Köhler illumination to speed up inspection and documentation tasks; the combination of a 5 MP sensor and versatile objective set ensures precise results with efficient workflow integration — order the instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. bScope BS.1157-EPLi — Digital microscope with 5 MP sensor and NeoLED Köhler illumination (Euromex) The bScope BS.1157-EPLi is a benchtop digital microscope designed for routine inspection, documentation and teaching in laboratories and quality control environments 5 MP CMOS sensor for detailed images NeoLED Köhler transmitted illumination E‑Plan IOS objectives incl. 4x–100x oil Supplied with ImageFocus Alpha software Accurate imaging for measurement and traceability The instrument is built around a 5 MP CMOS 1/2.5 inch sensor and a native pixel resolution of 2592 x 1944, which together provide high spatial detail suitable for visual inspection and image-based measurements. At full resolution the system delivers 7 fps, while a reduced resolution mode allows smoother live observation at 27 fps; these figures are specified by the manufacturer for optimal conditions and support both frame-grab documentation and live demonstrations. The result is a reliable image capture workflow that reduces rework and speeds up quality-control cycles by producing crisp, reproducible images. Optics and illumination that improve contrast and working comfort Optical performance is provided by the E‑Plan IOS objectives, covering low to high magnification ranges and including oil-immersion capability for high-resolution work. Even, reproducible lighting is achieved by the NeoLED Köhler transmitted illumination, which ensures uniform field brightness and improved contrast for transparent or thin samples. The binocular head with diopter adjustment on both sides supports comfortable, prolonged use and straightforward visual alignment before image capture — a practical advantage for teaching labs and repetitive inspection tasks. Digital integration for documentation and analysis Image handling and measurement are supported by ImageFocus Alpha software and a standard USB 2.0 interface, enabling easy connection to a workstation for image acquisition, annotation and export. The system’s dynamic range (76 dB), signal-to-noise ratio (41 dB) and 24-bit colour depth help preserve detail and colour fidelity in recorded images, which is essential when results enter a traceability chain or are used in reports. A calibration slide (1 mm / 100") included in the scope of delivery allows immediate verification of measurement scales and simplifies documentation procedures. Practical design for laboratory routines and education The device’s layout and supplied accessories — including the USB‑2.0 cable and calibration slide — make it ready for rapid deployment on the bench. Optional rechargeable AA batteries are offered for situations that require temporary portable operation. Robust optics, straightforward controls and software-driven capture make this digital microscope well suited to routine laboratory inspection, quality control benches and instructional settings where consistent imaging and ease of use matter most. Contact Metav Werkzeuge in Emmerich for a consultation on integrating the Euromex bScope BS.1157-EPLi into inspection workflows; technical advice and fast supply are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BS.1157-EPLi SKU: BS.1157-EPLi Brand: Euromex Product type: Digital microscope Model series: bScope Manufacturer article number: BS.1157-EPLi Performance figures Resolution: 5 MP Pixel resolution: 2592 x 1944 Sensor: CMOS 1/2.5 inch Frame rates: 7 fps at 2592 x 1944; 27 fps at 1280 x 960 Dynamic range: 76 dB Signal-to-noise ratio: 41 dB Colour depth: 24 bit Features and accessories Illumination: NeoLED transmitted illumination, Köhler Optics: E‑Plan IOS objectives (includes oil-immersion option) Microscope head: Binocular Diopter adjustment: Both sides Software: ImageFocus Alpha Connection: USB 2.0 Supplied accessories: USB‑2.0 cable; calibration slide 1 mm/100" Power options: Optional three rechargeable AA batteries FAQ What frame rates can be expected for live observation? The instrument delivers 7 fps at full 2592 x 1944 resolution and up to 27 fps at reduced resolution; these values for the bScope BS.1157-EPLi are specified by the manufacturer under optimal operating conditions. Is a calibration standard included for measurement work? Yes, the scope of delivery contains a calibration slide (1 mm / 100") that enables immediate verification of measurement scales with the bScope BS.1157-EPLi. Which software is supplied for image capture and analysis? The bScope BS.1157-EPLi is supplied with ImageFocus Alpha, which supports image acquisition, basic measurement and export via the USB 2.0 connection. Can the system handle high-magnification oil-immersion tasks? The supplied E‑Plan IOS objective set includes high-magnification optics with oil-immersion capability suitable for detailed surface and micro-structure work. Is there an option for battery operation away from a workstation? An optional set of three rechargeable AA batteries is listed for flexible usage scenarios; consult technical documentation for configuration details of the bScope BS.1157-EPLi. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope With 2560 x 1920 Resolution, Dual NeoLED, USB 2.0 - Euromex
Take advantage of high-resolution imaging, reliable LED illumination and a precise mechanical stage for consistent inspection workflows; order the Euromex instrument directly via Metav Werkzeuge or request advice from our consultants for integration into existing inspection stations. EcoBlue EC.1657 – Digital microscope with 5 MP camera and Dual NeoLED (Euromex) The EcoBlue EC.1657 is a digital upright microscope optimised for inspection, teaching and routine quality control, featuring a binocular head and an integrated mechanical X–Y stage for accurate sample positioning. 5 MP sensor, 2560 x 1920 pixel resolution Dual NeoLED illumination system Achromatic objectives 4x, 10x, S40x, S60x Integrated mechanical X‑Y stage 123 x 119 mm USB 2.0 connection with ImageFocus Plus High-resolution imaging for precise documentation and measurement The instrument is built around a 5 MP camera delivering 2560 x 1920 pixels via a CMOS 1/2.8-inch sensor, which supports a maximum of 30 fps under optimal conditions. This combination produces clear stills and usable live video for fast defect detection and traceable documentation. Higher pixel density means finer detail capture for measurements and reporting; the native resolution also reduces the need for aggressive interpolation when annotating images in software. Reliable illumination and optics for accurate colour and contrast Consistent visual results are achieved through the Dual NeoLED system paired with achromatic objectives, which minimise chromatic aberration and keep contrast stable across magnifications. The achromatic lens set (4x, 10x, S40x, S60x) provides faithful reproduction of sample features; in practical terms, this means fewer retakes and more reliable visual inspection. The optical turret with four positions simplifies switching between fields of view without losing focus, speeding up routine checks. Stable sample handling and efficient workflow integration A mechanically integrated X‑Y stage measuring 123 x 119 mm facilitates systematic scanning and repeatable positioning, essential for inspection protocols and comparative analysis. The binocular head offers conventional stereoscopic observation while the camera streamlines digital capture. Connection via USB 2.0 and the bundled ImageFocus Plus software enable immediate image acquisition and basic measurement functions on a standard workstation, improving throughput and reducing setup complexity. Ready for lab, classroom and shop‑floor use with practical accessories The digital package includes a calibration slide (1 mm/100) and a USB‑2.0 cable for straightforward commissioning; the camera operates in 24-bit colour for natural rendering of samples. Notes from the manufacturer state that image rates apply under optimal conditions, so environments with heavy processing or non‑standard lighting may affect live‑view performance. The overall configuration balances optical quality and operational simplicity to suit training, incoming inspection and routine component checks. For high-resolution documentation and reliable routine inspection, consult Metav Werkzeuge about the Euromex EcoBlue EC.1657 and arrange a tailored integration plan from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss options and delivery. Technical data Article number: EC.1657 SKU: EC.1657 Product type: Digital microscope Model series: EcoBlue Manufacturer: Euromex Facts Resolution: 5 MP (2560 x 1920 px) Sensor: CMOS 1/2.8-inch Frame rate: max. 30 fps Stage dimensions: 123 x 119 mm Objectives: 4x / 10x / S40x / S60x Special features Dual NeoLED illumination Binocular head ImageFocus Plus software 24-bit colour camera USB 2.0 connection Objective turret with four positions Integrated mechanical X‑Y stage Included: USB‑2.0 cable; calibration slide 1 mm/100 FAQ What resolution does the microscope support? The Euromex EcoBlue EC.1657 features a 5 MP camera with a native pixel resolution of 2560 x 1920, suitable for detailed inspection and documentation. Which objectives are fitted and how do they affect image quality? Achromatic objectives (4x, 10x, S40x, S60x) minimise colour fringing and improve sharpness across the field, so the EcoBlue EC.1657 delivers clearer images for measurement and visual inspection. Is the instrument suitable for teaching and demonstration? Yes; the binocular head combined with a camera output via USB 2.0 and ImageFocus Plus software makes the instrument well suited to classrooms and practical demonstrations. What accessories are included with delivery? Delivery of the EcoBlue EC.1657 includes a USB‑2.0 cable and a calibration slide (1 mm/100) to support immediate setup and measurement verification. Can the stage support systematic scanning and repeatable positioning? The integrated mechanical X‑Y stage (123 x 119 mm) enables repeatable sample positioning and methodical scanning for inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.0 mm 10x bScope Microscope Objective 0.25 NA, WD 5.0 mm - Euromex
Combine tenfold magnification, a 5.0 mm working distance and a 0.25 numerical aperture to achieve clear, repeatable images for routine laboratory and educational applications. Order the microscope objective directly via Metav Werkzeuge or contact our consultants for tailored advice. Microscope objective bScope BS.8410 — 10× magnification, NA 0.25 (Euromex) Microscope objective bScope BS.8410 is a laboratory-grade objective designed for general microscopy and life‑science applications, offering compact optics for routine imaging. Tenfold magnification for clear detail Working distance 5.0 mm for close samples Numerical aperture 0.25 for balanced resolution Dependable daily imaging that keeps workflows moving The bScope BS.8410 objective brings a reliable optical solution to everyday microscopy tasks. With tenfold magnification and a numerical aperture of 0.25, the lens provides a practical balance between contrast and resolution, making it suitable for routine observation, teaching labs and sample screening. The short working distance of 5.0 mm allows compact setups and close-up views of slides, while the objective’s construction supports consistent focal performance across repeated examinations. The result is faster sample throughput and fewer adjustments during a typical session. What the optical specifications mean for results Understanding the numbers saves time: the numerical aperture (NA) describes the objective’s ability to gather light and resolve fine detail — a higher NA improves resolving power at the cost of depth of field. With NA 0.25, this objective is optimised for crisp imaging of standard stained slides and routine brightfield applications without demanding complex illumination. The specified working distance defines the gap between lens front and specimen; 5.0 mm offers close access while still leaving room for coverslips and minor manipulations. The designation IOS PLi noted in the product data refers to the optical type and correction level used by Euromex to maintain flat field performance in typical educational and life‑science setups. Simple integration and consistent handling in labs The objective’s format and mounting suit standard microscope turrets, enabling straightforward replacement and compatibility with common trinocular and binocular microscopes. Its design supports technicians and instructors who require dependable optics without lengthy calibration each day. Paired with a clear specification sheet and source references, the lens reduces uncertainty in procurement and setup. For workshops and small laboratories seeking dependable optics, the combination of balanced performance and consistent manufacturing delivers measurable time savings and fewer repeat inspections, contributing to smoother operations. For a precise fit in educational or lab workflows, contact Metav Werkzeuge to discuss the Euromex bScope BS.8410 or request further technical details and sourcing options — Metav Werkzeuge provides direct support from Emmerich and specialist advice for integration. Technical Data Article number: BS.8410 SKU: BS.8410 Product type: Microscope objective Series: bScope Manufacturer: Euromex Label: Microscope objective bScope BS.8410 Facts Magnification: 10× Working distance: 5.0 mm Numerical aperture: 0.25 Special features IOS PLi objective Source: Education PDF-S. 21; Life Science PDF-S. 9,39 Category: For microscopes FAQ What samples is this objective best suited to? The Euromex bScope BS.8410 microscope objective is ideal for standard stained slides and routine brightfield specimens where balanced resolution and contrast are required. How does the numerical aperture affect image quality? A numerical aperture of 0.25 on the bScope BS.8410 improves the objective’s ability to gather light and resolve detail compared with lower NA optics, while maintaining a useful depth of field for everyday observations. Will the objective fit a standard microscope turret? Yes, the bScope BS.8410 is designed for conventional turret mounting and integrates easily into typical laboratory binocular and trinocular microscopes. Is the short working distance a limitation for sample manipulation? The 5.0 mm working distance on this objective offers close access for detailed viewing while still accommodating coverslips and light sample handling during routine procedures. Where can the technical source information be found? Further specification and reference material are listed in the product sources: Education PDF‑S. 21 and Life Science PDF‑S. 9,39, as cited in the product details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.1 mm 20x iScope Microscope Objective 0.40 NA - Euromex
High-resolution imaging at 20x magnification combined with a 0.40 numerical aperture and a 5.1 mm working distance delivers crisp, reliable results for routine laboratory and teaching applications; order the objective directly via Metav Werkzeuge or request technical advice from our consultants. iScope IS.8920 20x Microscope Objective, 0.40 NA by Euromex The iScope IS.8920 is the 20x microscope objective optimised for routine laboratory and life science brightfield work, offering a balance of resolution and specimen clearance. 20x magnification for detailed imaging Numerical aperture 0.40 for higher resolution Working distance 5.1 mm for specimen clearance Documented use in education and life science Sharp imaging where numerical aperture matters The 20x optical element in this objective delivers a clear enlargement suited to inspection tasks and microscopy teaching. The 0.40 numerical aperture is the decisive optical parameter for resolving fine detail; a higher numerical aperture increases light-gathering ability and improves lateral resolution, which is beneficial when distinguishing small structures in stained specimens. As a result, the objective supports more reliable measurement and visual assessment in routine workflows. Where precise optics are required, the combination of 20x and 0.40 NA produces a notable improvement in image contrast compared with lower-NA mid-power lenses. Practical working distance for everyday lab handling A working distance of 5.1 mm provides sufficient clearance between the front lens and the sample for common slide-mounted preparations and thin coverslips, reducing the risk of accidental contact while allowing comfortable focussing during repeat inspections. This spacing helps protect both specimen and lens during classroom demonstrations and regular laboratory use, while keeping the optical path compact enough for typical bench-top microscopes. The moderate working distance also eases handling when using immersion media are not required, making the objective a pragmatic choice for many non-specialist applications. Documented suitability for education and life science applications Manufacturer documentation lists the objective specifically for education and life science contexts, indicating an emphasis on robustness and consistent performance in teaching and routine analytical environments. The optical specification is recorded in the supplier information (Education PDF S.25; Life Science PDF S.16,42), which supports procurement decisions where traceable documentation matters. For facilities seeking dependable mid-power optics, the iScope IS.8920 offers a measured combination of magnification, aperture and working distance that fits standard laboratory tasks without demanding specialised handling or consumables. Practical advantages in daily microscopy work The objective’s specification encourages predictable results across repeated observations, which is especially important in instructional settings and repetitive inspection processes. The defined optical parameters simplify comparisons between images and reduce variability introduced by switching to widely different objectives. When clear, reproducible images are required for documentation or basic image analysis, the balanced optical design contributes to workflow efficiency and reduces the need for additional corrective steps. For procurement and specific application advice relating to the Euromex iScope IS.8920, please contact Metav Werkzeuge—experienced specialists based in Emmerich who can confirm suitability and availability for the intended laboratory use Technical data Article number: IS.8920 Manufacturer: Euromex Product type: Microscope objective Model series: iScope Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 5.1 mm Special features 20x/0.40 IOS PLPHi objective WD 5.1 mm Documented for education and life science use Source: Education PDF S.25; Life Science PDF S.16,42 FAQ What magnification and resolution does this objective provide? The iScope IS.8920 is specified as a 20x microscope objective with a 0.40 numerical aperture, which supports improved resolution and light collection compared with lower-NA mid-power lenses. Is the working distance sufficient for standard slide work? Yes; the 5.1 mm working distance of the Euromex IS.8920 gives practical clearance for most cover‑slip preparations and routine specimen handling without compromising optical performance. For which applications is this objective documented? Manufacturer documentation identifies the objective for education and life science applications, making it suitable for teaching laboratories and standard life science inspections. How does numerical aperture affect image quality in practice? A higher numerical aperture, such as 0.40, increases the lens’s light-gathering ability and lateral resolution, which helps to resolve finer details in stained or contrast-enhanced specimens when using the iScope IS.8920. Are there special maintenance requirements for this objective? Normal care for optical lenses is appropriate: keep the front element clean, use lens tissue and approved cleaning fluid, and avoid contact with specimens to protect the objective’s optical surfaces. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.1mm Plan Stress-Free PLPOLi 20x/0.40 IOS Transmitted Light Polarisation Objective, 0.17mm Cover Glass Corrected - Euromex
The combination of plan, stress-free optics, a 20x magnification and a 5.1 mm working distance enables repeatable polarisation imaging with minimal sample distortion; order this objective directly via Metav Werkzeuge or consult the sales team for application advice. Plan stress-free PLPOLi 20x/0.40 IOS objective (iScope, polarisation) — Euromex The Plan stress-free PLPOLi 20x/0.40 IOS objective is a transmitted-light polarisation objective for iScope systems, corrected for a 0.17 mm cover glass and specified for a 5.1 mm working distance Plan stress-free optics for accurate polarisation 20x magnification with 0.40 numerical aperture Corrected for 0.17 mm cover glass Consistent polarised images for reliable analysis The objective delivers flat-field (plan) performance so structures across the entire field stay in focus, which is essential for inspection and documentation tasks. The stress-free optical design reduces internal birefringence that can distort polarised light, ensuring that polarimetric contrast reflects the specimen rather than the lens. For laboratories and quality departments this means fewer repeat scans and more dependable image-based decisions, improving throughput and traceability. Faster workflows through defined working distance and optics With a 5.1 mm working distance and 20x magnification, the lens balances resolution and sample clearance for routine transmitted-light polarisation applications. The specified working distance supports the use of thicker specimens or modest illumination accessories without risking contact. Together with the 0.40 numerical aperture, the objective enables sharper detail capture while keeping depth of field manageable for inspection tasks, so measurement and documentation proceed with less handling time. What plan and stress-free mean in practice A plan objective corrects field curvature so that the centre and edges of the image are equally sharp; this is particularly useful when stitching images or comparing regions across a slide. The term stress-free indicates that the glass and mounting minimise internal stress-induced birefringence, which is critical when working with polarised light—otherwise false anisotropy can appear. These optical qualities translate into clearer micrographs and more reliable material analysis, even for users with basic polarisation experience. Engineered for iScope transmitted-light polarisation systems Designed for iScope transmitted-light polarisation setups, the objective is corrected for a 0.17 mm cover glass, matching standard slide preparations to avoid spherical aberration. Compatibility with the iScope range simplifies integration and reduces the need for additional correction collars or adapters. The optical specification supports documentation, routine failure analysis and educational polarisation demonstrations where reproducible image quality is required. Practical benefits for inspection and documentation teams Specimen handling is simplified by predictable imaging behaviour: fewer focus adjustments, consistent contrast in polarisation, and reduced artefacts. That promotes a smoother inspection routine and lowers the risk of misinterpretation during quality control. For procurement and workshop managers the combination of robust optical design and industry-standard corrections contributes to a dependable imaging chain from sample to report. For application advice, compatibility checks or to order this Euromex objective with SKU IS.7920-T please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists can advise on integration into existing iScope polarisation setups Technical data Article number: IS.7920-T SKU: IS.7920-T Manufacturer: Euromex Product type: Microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 5.1 mm Cover glass correction: 0.17 mm Special features Plan, stress-free optics Designed for transmitted-light polarisation Compatible with iScope systems Image: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1d/a5/f1/6a/6af1a51dd8ecf2f60acae0b8/IS.7920-T.jpg FAQ Is this objective compatible with all iScope transmitted-light polarisation stands? The objective is specified for iScope transmitted-light polarisation systems and was designed to match their optical path; compatibility checks with the exact stand model are recommended. What does "stress-free" mean for polarisation work? Stress-free indicates minimal internal glass stress and mounting strain, reducing lens-induced birefringence so polarisation contrast represents the specimen rather than the optics. Can the objective be used without a cover glass? The objective is corrected for a 0.17 mm cover glass; using no cover glass may introduce spherical aberration or a focus shift compared with standard slide preparations. How does the 5.1 mm working distance affect sample handling? A 5.1 mm working distance provides moderate clearance for sample manipulation and illumination accessories while maintaining the optical performance required for high-contrast polarisation imaging. Is the objective suitable for documentation and image stitching? Yes — the plan correction provides a flat field that supports stitching and consistent documentation across the image field. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.27mm 20x Microscope Objective 0.40 NA, WD 5.27 mm - Euromex
Benefit from precise mid-range magnification together with a 0.40 numerical aperture and a compact working distance of 5.27 mm for consistently sharp images; order or request advice via Metav Werkzeuge to ensure compatibility and fast supply. BioBlue.Lab BB.7220 – Euromex microscope objective, 20x / 0.40 NA BioBlue.Lab BB.7220 is a 20x microscope objective intended for detailed optical observation in education and routine laboratory tasks, combining a high numerical aperture with a short working distance for improved detail and light collection. 20x magnification for clear mid-range detail Numerical aperture 0.40 for improved resolution Working distance 5.27 mm for close focusing Sharper detail through higher light throughput The 20x power combined with a 0.40 numerical aperture translates into better light gathering and finer detail in transmitted-light applications. A larger numerical aperture increases the objective’s ability to resolve small structures and enhances contrast when imaging thin specimens. For laboratories that require dependable optical performance, this optical combination supports accurate observation of cellular organisation and preparative detail without the complexity of immersion techniques. The PLi designation in the technical notes indicates the objective’s intended optical correction and build, contributing to consistent image quality. Close working distance for precise specimen access A working distance of 5.27 mm allows the objective to focus closely on slides and thin samples while maintaining clearance for coverslips and micro-manipulation in routine workflows. The compact focus distance benefits tasks where sample thickness is limited and where mechanical stability matters: less stage travel is needed to achieve focus, reducing vibration-related blur. While the short working distance requires mindful handling of specimens and tools, it also enables higher collection efficiency of light at the chosen magnification, supporting clearer structural definition. Reliable everyday use in teaching and lab settings Engineered for routine microscopy rather than specialised immersion procedures, this objective fits standard brightfield setups and classroom environments, delivering repeatable results across multiple users. The optical characteristics are suited to common laboratory needs, where resolution and user-friendly operation are prioritised. Integration with compatible optical tubes and condenser set-ups yields consistent imaging without the need for extensive recalibration, making it a pragmatic choice for institutions balancing performance and ease of use. Installation, handling and preservation of image quality Mounting the lens correctly and observing standard optical hygiene will preserve the objective’s performance. The nominal data — 20x, 0.40 NA, working distance 5.27 mm — should be matched with the appropriate tube length and illumination to exploit the lens’s capabilities. Routine cleaning with lens-safe materials and secure storage when not in use help maintain contrast and clarity over many sessions. For bespoke compatibility questions, the technical specifications provide a clear basis for checking mechanical and optical fit before acquisition. For ordering details or technical consultation regarding supply and compatibility, contact Metav Werkzeuge in Emmerich by phone or email for tailored advice and fast delivery. Technical data Article number: BB.7220 SKU: BB.7220 Brand: Euromex Model series: BioBlue.Lab Product type: Microscope objective UID: BB.7220 Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 5.27 mm Special features PLi objective designation Intended for microscopy accessories → Objectives Category: For microscopes (Microscopy accessories > Objectives > For microscopes) FAQ What does the numerical aperture mean for imaging performance? The numerical aperture (0.40) determines light-gathering capacity and resolving power; with the BioBlue.Lab BB.7220 this value supports improved detail and contrast at 20x magnification. Is this objective suitable for classroom and routine lab use? Yes, the Euromex BioBlue.Lab BB.7220 objective is designed for straightforward integration into standard microscopy setups used in teaching and routine laboratory workflows. How close can the objective focus to the specimen? The working distance of 5.27 mm specifies the clearance between the lens front and the specimen at focus, enabling close observation of thin samples while requiring careful stage handling. Are there special mounting requirements for this objective? Compatibility depends on the microscope’s objective mount and tube configuration; check the technical data and match tube length to achieve optimal performance with BB.7220. What maintenance keeps the objective performing well? Gentle cleaning with approved lens tissue and storage in a dust-free environment preserve image quality; the optical specifications of the Euromex BB.7220 provide a clear basis for regular care. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.8mm 10x iScope Microscope Objective 0.25 NA, WD 5.8mm - Euromex
Take advantage of high‑contrast imaging and a short working distance to inspect fine specimens with confidence; the compact optical design delivers reliable 10x performance and consistent resolution for educational and routine life‑science work. Order the lens directly via Metav Werkzeuge or consult the Metav team for application advice. iScope IS.8810 microscope objective — 10x, NA 0.25 (Euromex) An iScope IS.8810 microscope objective engineered for 10x magnification and close working distances, suitable for educational and life‑science observation tasks. 10x magnification for reliable observation Numerical aperture 0.25 for improved resolution Working distance 5.8 mm for close-focus samples Clear, measurable resolution for routine microscopy The optical specification centres on 10x magnification combined with a Numerical Aperture 0.25, which together determine the resolving power of the lens. The numerical aperture is a measure of the light‑gathering ability and angular acceptance of the objective; a higher value improves detail capture and contrast when observing thin sections or stained preparations. This balance of magnification and aperture makes the lens well suited to tasks where discernible structural contrast is required without the complexity of higher‑power objectives. The design supports reproducible imaging results in teaching labs and basic life‑science inspections. Close working distance for delicate samples and coverslips A working distance of 5.8 mm allows close proximity to specimens while maintaining safe clearance for coverslips and micro‑manipulation tools. This distance is advantageous when handling mounted preparations, small electronic components or microfluidic slides that require close visual inspection. The compact clearance reduces the need for repeated refocusing during routine workflows, helping to maintain throughput and minimise accidental contact with samples. The optical geometry is therefore optimised for tasks where fine manual adjustment and sample access are necessary. Practical compatibility and everyday laboratory value Belonging to the iScope series, the objective provides a straightforward option for upgrading standard microscope configurations with a reliable 10x lens. Source documentation lists the same key values (10x, NA 0.25, WD 5.8 mm) in educational and life‑science materials, underscoring its role in basic laboratory education and routine inspection. The construction supports consistent imaging across sessions and reduces uncertainty for procurement teams seeking quantifiable optical performance. For additional specification checks or to confirm compatibility with specific microscope mounts, Metav Werkzeuge can provide targeted advice and supply options. Contact Metav Werkzeuge for tailored technical guidance and procurement of the Euromex iScope IS.8810 microscope objective, delivered directly from Emmerich with transparent logistics and expert support Technical Data Article number: IS.8810 Brand: Euromex Type: Microscope objective Facts Magnification: 10x Numerical aperture: 0.25 Working distance: 5.8 mm Features Series: iScope Source references: Education PDF p.24; Life Science PDF pp.16,41 FAQ What magnification does the objective offer? The objective provides 10x magnification as specified for the iScope IS.8810 microscope objective. What is the numerical aperture and why does it matter? The Numerical Aperture is 0.25, which influences the lens's resolving capability and light collection; a higher NA improves detail and contrast in transmitted‑light observations. Is the working distance suitable for coverslipped specimens? Yes, the working distance of 5.8 mm is designed to allow close focusing on coverslipped slides and small specimens while maintaining sample clearance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5.95mm 10x bScope Microscope Objective 0.25 NA - Euromex
Reliable laboratory imaging is achieved by combining 10x magnification, a numerical aperture of 0.25 and a compact working distance of 5.95 mm; this balance of clarity and close‑focus capability supports routine inspection and teaching tasks. Order the bScope BS.8210 directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.8210 — Microscope objective, 10x / NA 0.25 (Euromex) The bScope BS.8210 is a 10x microscope objective designed for close‑focus laboratory and education microscopy, providing reliable contrast and detail for routine sample observation. Microscope objective »bScope BS.8210« by Euromex 10x magnification for standard imaging Numerical aperture 0.25 for resolution Working distance 5.95 mm for close focussing Clear images at short working distances for precise inspection The combination of 10x magnification and a numerical aperture of 0.25 delivers improved light gathering and finer detail compared with lower‑NA optics, which translates to better contrast and more reliable identification of small structures. In practical terms, the higher aperture increases resolving power while maintaining suitable depth of field for common laboratory specimens. This makes the objective particularly useful where enhanced visual discrimination is required without moving to high‑power objectives. Practical design that suits education and routine laboratory use With a working distance of 5.95 mm, the objective supports close‑range focusing necessary for thin specimens or when additional devices (e.g. polarisers or phase contrast attachments) sit between specimen and lens. The optical specification is presented in a concise, standardised form so that integration into existing optical trains is straightforward; compatibility concerns are reduced by clear numeric data rather than ambiguous claims. The result is an optic that fits well into teaching microscopes and bench‑top systems used for repeatable, everyday analyses. Specified performance for confident procurement and maintenance The objective is defined with explicit technical parameters—magnification, numerical aperture and working distance—so procurement decisions can be based on measurable capability rather than marketing. The IOS EPLi designation in the technical notes denotes the optical design reference used in the product literature, enabling technicians to verify fit and performance against established documentation. For workshops and instrument rooms seeking predictable imaging results, this clarity supports efficient stock management and reduces the need for trial‑and‑error purchases. Request tailored advice from Metav Werkzeuge on the Euromex bScope BS.8210 microscope objective — specialists in precision from Emmerich are ready to assist: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: BS.8210 SKU: BS.8210 Manufacturer: Euromex Model series: bScope Product type: Microscope objective Facts Magnification: 10x Working distance: 5.95 mm Numerical aperture: 0.25 Special features IOS EPLi objective (as stated in product literature) Specified in Education and Life Science PDF sources Label: Mikroskopobjektiv bScope BS.8210 FAQ What magnification does this objective provide? The objective offers 10x magnification, suitable for low‑to‑medium magnification observation with improved field detail when paired with compatible eyepieces. What is the numerical aperture and why does it matter? The numerical aperture is 0.25, which influences resolution and light collection; a higher NA enables finer detail and better contrast for transparent or stained specimens. How close can the lens focus to the specimen? The working distance is 5.95 mm, allowing close working clearance for thin samples and for use with additional microscope accessories. Is this objective suitable for teaching microscopes? Yes — the specification and robust optical performance make the objective appropriate for education and routine laboratory setups where predictable imaging is required. Which documentation supports these specifications? Key specification notes appear in the Education and Life Science PDF references cited in the product literature; the objective is listed as IOS EPLi 10x/0.25 WD 5.95 mm in those documents. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50cm Swanneck Single-Arm Light Guide 4mm Diameter, Self-Supporting - Euromex
Benefit from the self-supporting gooseneck for stable positioning and the 4 mm diameter that delivers focused illumination exactly where it is needed. Order the light guide directly via Metav Werkzeuge or consult our specialists for precise technical advice. Euromex single-arm gooseneck light guide LE.5213 — 50 cm, 4 mm The Euromex single-arm gooseneck light guide LE.5213 is a self-supporting, flexible illuminator designed for close-up microscopy and inspection tasks. Self-supporting gooseneck arm 50 cm length 4 mm light guide diameter for focused illumination Robust build for laboratory and inspection use Integrates with common lighting setups in microscopy Stable positioning for repeatable inspection The self-supporting gooseneck construction offers reliable, vibration-resistant positioning so the light source remains steady during delicate procedures. With a 50 cm reach, the arm enables flexible placement without frequent readjustment, which reduces process downtime and increases throughput in repetitive measurement or inspection tasks. This stable arrangement is particularly beneficial for precision visual work where consistent lighting reduces measurement variance and supports quicker decision-making on the shop floor. Concentrated illumination for small fields of view A 4 mm diameter light guide produces a compact, concentrated beam that improves contrast on small targets and in narrow workspaces. Concentrating light into a defined spot decreases stray illumination and assists in revealing fine detail on circuit boards, small components or specimen slides. The focused light source enhances visual acuity and can make defect detection and manual assembly more efficient, translating the simple geometry of the guide into measurable gains in inspection quality. Practical design for routine laboratory and workshop use Built by Euromex, the unit combines straightforward mechanics with a design suited to continuous use in bench-top environments. The single-arm layout minimises obstruction of the work area while the gooseneck keeps the light precisely where required, supporting both handheld inspection and fixed microscopy setups. The model LE.5213 offers a compact, low-maintenance solution for teams that prioritise dependable illumination and straightforward handling during daily operations. For procurement and expert assistance regarding the Euromex single-arm gooseneck light guide LE.5213, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com to arrange supply and technical guidance Technical data Article number: LE.5213 SKU: LE.5213 Manufacturer: Euromex Product type: Light guide Core specifications Length: 50 cm Diameter: 4 mm Arm: single-arm Features Self-supporting gooseneck construction Designed for microscopy and inspection lighting Image file: LE.5213.jpg FAQ How stable is the gooseneck arm under extended positions? The Euromex single-arm gooseneck light guide LE.5213 uses a self-supporting arm that holds its set position, delivering stable illumination for precise inspection and measurement tasks. What beam characteristic does the 4 mm diameter provide? The 4 mm diameter light guide concentrates light into a focused spot, improving contrast and visibility for small-area inspection such as electronics or fine specimen work. Is the 50 cm reach suitable for bench-top microscopy? A 50 cm arm length provides generous reach for most bench-top setups, allowing flexible positioning without impeding the working area around the microscope or inspection station. Which applications are most appropriate for this light guide? This light guide is intended for close-up lighting in microscopy accessories, visual inspection, electronics assembly and other tasks requiring directed, stable illumination. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50cm Three-Arm Gooseneck Light Guide 4mm Diameter Self-Supporting - Euromex
Take advantage of precise, directional illumination provided by the combination of a three‑arm configuration, a self‑supporting gooseneck and a narrow 4 mm light channel for focused inspection lighting. Order the item directly via Metav Werkzeuge or consult the sales team for integration advice. Euromex LE.5215 — Three‑arm light guide (50 cm self‑supporting gooseneck, 4 mm) The Euromex LE.5215 is a three‑arm light guide designed to deliver controlled, adjustable illumination for microscopy and close‑inspection tasks Three‑arm arrangement for multi‑angle lighting Self‑supporting gooseneck for stable positioning 50 cm reach for flexible working distances 4 mm diameter for narrow, focused light Precise, directional lighting for inspection and microscopy The LE.5215 provides focused illumination where even minor detail matters. The three‑arm layout enables separate light vectors to be positioned around a specimen or workpiece, reducing shadows and improving contrast during visual inspection. Because the assembly is a fibre light guide, the light is transmitted without heat at the tip, which is beneficial for temperature‑sensitive tasks. This construction offers a reliable method for enhancing visibility on microscopes, inspection benches and fine‑assembly stations while keeping the light source at a safe distance. Robust positioning with a self‑supporting gooseneck A key benefit is the self‑supporting gooseneck, which holds set positions without constant manual pressure. The 50 cm length gives a practical working radius, and the slender 4 mm channel keeps the light beam narrow and precise. The combination of reach and stiffness means operators can set the beam once and maintain consistent illumination for repetitive tasks. For users needing repeatable lighting angles, this reduces setup time and contributes to more consistent visual assessments across batches. Practical advantages in daily workshop use The three‑arm arrangement translates into tangible efficiency gains: multiple angles can be illuminated simultaneously, cutting the need to reorient either the part or the lamp between inspection steps. The LE.5215 is compact and integrates into existing illumination systems used in microscopy and close‑up quality control. Cleaning and routine care are straightforward due to the simple external construction, supporting long‑term reliability and low maintenance overhead. Suitable applications and integration notes Designed for microscopy illumination and other close‑range visual work, this light guide fits contexts where controlled, cool lighting is required—such as component inspection, soldering checks and laboratory sample preparation. The narrow 4 mm diameter assists in delivering a focused beam, useful when highlighting fine features without flooding the entire field with light. For integration details or to confirm compatibility with a specific lamp housing, technical advice is available from the supplier. Contact Metav Werkzeuge today to discuss the Euromex LE.5215 three‑arm light guide and arrange the optimal lighting solution for the workshop or laboratory environment. Technical Data Article number: LE.5215 SKU: LE.5215 Manufacturer: Euromex Product type: Light guide Data Arms: 3 Length: 50 cm Diameter: 4 mm Special features Self‑supporting gooseneck Suits microscopy illumination applications Image: LE.5215.jpg FAQ What is the primary use of this light guide? The LE.5215 is intended for directed lighting in microscopy and close‑inspection tasks where focused, cool illumination is required. How stable is the gooseneck during prolonged use? The self‑supporting gooseneck of the LE.5215 maintains its set position reliably during standard inspection and assembly operations, reducing the need for frequent readjustment. Can the three arms be oriented independently? Yes, the three arms on the Euromex LE.5215 can be positioned to create separate light vectors for multi‑angle illumination without affecting adjacent arms. Is the light at the tip hot during operation? As a fibre light guide, the LE.5215 transmits light without significant heat at the emitting end, making it suitable for temperature‑sensitive inspection tasks. How should the light guide be cleaned and maintained? Routine maintenance for the LE.5215 involves gentle cleaning of external surfaces and ensuring the gooseneck retains its integrity; avoid aggressive solvents and store with the arms in a neutral position. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50cm Two-Arm Flexible Gooseneck Light Guide 4mm Diameter, Self-Supporting - Euromex
Benefit from the combination of flexible, targeted illumination and a robust, self-supporting goose-neck for consistent inspection work; order the LE.5214 two-arm light guide directly via Metav Werkzeuge or consult our specialists for configuration advice. LE.5214 two-arm self-supporting goose-neck light guide (50 cm, 4 mm) by Euromex LE.5214 is a two-arm light guide designed to provide flexible, directed illumination for microscopes and inspection stations Two-arm design for targeted illumination Self-supporting goose-neck, 50 cm reach 4 mm diameter flexible light guides Focussing heads not included for modular setup Precise, targeted illumination for close inspection The two-arm configuration delivers controllable, targeted illumination that reduces unwanted reflections and improves contrast on small components. Each 4 mm conductor guides light into a focussed beam, making fine detail more visible under microscopes and inspection rigs. This arrangement supports visual tasks where consistent lighting angle and intensity are essential for repeatable inspections and quality checks, contributing to faster fault detection and lower rework rates. Stable positioning that preserves setup accuracy A self-supporting goose-neck with a 50 cm reach provides secure, vibration-resistant positioning so the illumination remains where it is set. The mechanical stiffness of the arm minimises drift during prolonged measurements or soldering operations, allowing illumination to be adjusted once and relied upon across multiple parts. This stability is particularly valuable in laboratory and workshop environments where repeatability and operator independence are required. Modular configuration for adaptable workflows The design intentionally omits built-in heads—focussing heads not included—so the system can be combined with existing light sources and microscope adapters. This modular approach enables integration into established setups without replacing lighting across the bench. The separate heads concept supports customised assembly: select the most suitable light source and coupling to match task-specific brightness and colour temperature requirements, simplifying inventory and future upgrades. Narrow profile for access to confined work areas With a 4 mm diameter, the light conductors reach narrow gaps and tight assemblies while delivering a focused beam where it is needed. The slim profile reduces shadowing and permits illumination of cavities that larger lamps cannot reach, aiding work on electronics, dental models and small mechanical parts. The flexible conductors also allow subtle beam adjustment without disturbing the component, preserving delicate assemblies and improving inspection ergonomics. Order the Euromex LE.5214 via Metav Werkzeuge for an adaptable, stable lighting solution; Metav Werkzeuge offers expert advice from Emmerich and can advise on compatible focussing heads and integration options Technical data Article number: LE.5214 SKU: LE.5214 Manufacturer: Euromex Product type: Light guide Category: microscopy accessories / illumination / light guides Facts Length: 50 cm Diameter: 4 mm Arms: 2 Special features Self-supporting goose-neck Two-arm light guide Focussing heads not included Flexible light conductors FAQ What applications is this light guide suitable for? The Euromex LE.5214 two-arm light guide is suitable for microscopy and close visual inspection tasks where directed, adjustable illumination is needed. Are focussing heads included with the LE.5214? No, the LE.5214 is supplied without focussing heads to allow modular integration with chosen light sources and adapters. How far does the goose-neck reach and hold position? The goose-neck provides a 50 cm reach and is self-supporting, offering stable positioning for repeatable inspection setups. Can the light guide access narrow spaces? Yes, the 4 mm diameter light conductors are designed for access to confined areas and fine-detail work. Is the LE.5214 compatible with standard microscope illumination systems? The LE.5214 is designed as a modular light guide and can be combined with suitable microscope light sources and couplings; compatibility depends on the chosen head or adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x50x60mm HD-Mini VC.3024-HDS Digital Microscope Camera 2 MP 1920 x 1080 60 fps HDMI, C-Mount 0.37x - Euromex
Take advantage of the combination of high-definition imaging, versatile connectivity and a compact design for consistent documentation and inspection results. Order the HD-Mini VC.3024-HDS directly via Metav Werkzeuge or consult the advisors for application-specific guidance. HD-Mini VC.3024-HDS — Microscope camera with 13-inch HD screen, 2 MP and HDMI output The HD-Mini VC.3024-HDS is a compact microscope camera system designed for clear Full HD imaging and easy integration into inspection workflows. 2 MP Full HD sensor 60 fps live view capability 13-inch HD screen included HDMI and USB digital outputs Accurate imaging that supports rapid inspection decisions Built around a Sony CMOS 1/2.8" sensor, the HD-Mini VC.3024-HDS delivers a 1920 x 1080 pixel image that balances resolution with real-time performance. The 2 MP sensor and a pixel size of 2.9 x 2.9 µm provide sufficient detail for visual inspection, measurement reference and documentation without excessive data overhead. The progressive scan readout ensures stable frames, while the 60 fps live view (mode-dependent) reduces motion blur when analysing moving samples. For production environments this translates into faster decision-making and fewer repeated inspections. Seamless workflow: intuitive screen, fast outputs, and expandable storage Integration into existing setups is straightforward thanks to HDMI and USB digital outputs and the included 13-inch HD screen for immediate visual feedback. The unit accepts SD storage starting with the supplied 32 GB card and supports cards up to 128 GB, enabling extended recording sessions or high-volume image capture. The supplied C-Mount 0.37x adapter and additional lens adapters make mounting to a wide range of microscope objectives quick and reproducible, reducing setup time and minimising downtime during tool changes. Robust operation in variable environments Designed for routine laboratory and workshop use, the system operates across a broad temperature window from -10 °C to 50 °C and within 30–80% relative humidity, offering dependable performance in conditioned labs and many on-site environments. Noise emissions are low at 42 dB, supporting concentration during manual inspection tasks. The camera supports both automatic and manual exposure and white balance control, giving operators a choice between hands-off consistency and fine-tuned image optimisation for challenging specimens. Practical accessories that streamline calibration and measurement The supply package includes practical items that accelerate productive use: a 32 GB memory card, adapter rings for 30.0 mm and 30.5 mm to 23.2 mm, a 10 mm/100 calibration slide for immediate measurement verification and the C-Mount 0.37x adapter for objective matching. These inclusions reduce the need for additional purchases and enable quick verification of scale and focus, which is especially useful when traceable measurement or documentation is required. For project-specific advice or to discuss how the HD-Mini VC.3024-HDS fits into an inspection line, contact Metav Werkzeuge for tailored recommendations and fast supply from Emmerich. Technical Data Article number: VC.3024-HDS SKU: VC.3024-HDS Brand: Euromex Model series: HD-Mini Facts Resolution: 2 MP (1920 x 1080) Sensor: Sony CMOS 1/2.8" Pixel size: 2.9 x 2.9 µm Frame rate: 60 fps (live view, mode-dependent) Display: 11.6" HD screen (label indicates 13" supplied screen) Storage: SD card 32 GB supplied, up to 128 GB supported Noise level: 42 dB Operating temperature: -10 °C to 50 °C Relative humidity: 30–80% Supply voltage: 100–240 Vac; output 12 Vdc / 1 A Sensitivity: 1300 mV/lux-sec Format: 1/2.8", HDTV 1080p Digital output: HDMI Special features Adapter: C-Mount 0.37x Mounting: C-Mount capture Exposure: Automatic / Manual White balance: Automatic / Manual Scan mode: Progressive scan Included accessories: 32 GB memory card; adapter rings 30.0 mm and 30.5 mm to 23.2 mm; calibration slide 10 mm/100; C-Mount adapter 0.37x Connection types: HDMI and USB Compact dimensions: 50 x 50 x 60 mm FAQ What image quality can be expected from this camera? The camera delivers Full HD images at 1920 x 1080 with a 2 MP sensor and a pixel size of 2.9 µm, providing clear detail suitable for inspection and documentation tasks with the HD-Mini VC.3024-HDS. Can the camera record continuously to an SD card? Yes, the system accepts the supplied 32 GB SD card and supports cards up to 128 GB, allowing extended recording sessions when using the HD-Mini VC.3024-HDS. Is the live view smooth enough for moving samples? With a 60 fps live view (depending on mode and conditions) and progressive scan, the unit provides reduced motion blur for smoother inspection of moving or dynamic specimens. Which outputs are available for display or capture systems? The camera offers HDMI digital output and USB connectivity for integration with displays and capture hardware in inspection setups. Are measurement standards included for calibration? A 10 mm/100 calibration slide is included to verify magnification and support basic measurement routines with the system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
51 x 26 mm Microscope Stage With Double Vernier And Horizontal Adjustment, Attachable - Euromex
Take advantage of the combination of precise sample positioning, robust mechanics and straightforward readout for reliable microscopy workflows; order the stage directly via Metav Werkzeuge or consult the team for application advice. Mikroskoptisch EcoBlue EC.9500 — attachable mechanical X‑Y stage, 51 × 26 mm travel (Euromex) The Mikroskoptisch EcoBlue EC.9500 is an attachable mechanical X‑Y stage designed to bring controlled lateral movement to educational and routine laboratory microscopes in a compact format Attachable mechanical X‑Y stage 51 × 26 mm translation range Double vernier with separate horizontal knobs Faster sample alignment through precise lateral control The mechanical X‑Y stage offers a compact and reliable way to position specimens with repeatable accuracy. With a 51 × 26 mm translation range, the platform allows fine lateral movements while preserving working distance, so slide navigation becomes more efficient and less time-consuming. The integrated double vernier enables readable sub-divisions for coarse and fine adjustments, which reduces repositioning time and contributes directly to improved throughput in teaching or routine inspection tasks. The clear mechanical feedback of the separate horizontal knobs supports controlled steps and prevents inadvertent overshoot, making specimen handling both faster and safer. Built for educational benches and routine laboratory use As an attachable accessory, the stage fastens to a wide range of microscope frames, transforming standard stands into more versatile inspection systems without complex retrofitting. The platform’s straightforward construction is deliberately robust, designed for repeated daily handling in classrooms, service workshops and quality-control benches. Low complexity in the mechanics translates into low maintenance requirements and predictable long-term performance, which makes this stage a practical choice where ease-of-use and uptime are priorities rather than elaborate automation. Clear readout and understandable adjustment for confident operation The twin-scale layout of the vernier provides interpretable position feedback even for users new to precision stages: one scale for the main coarse position and a second vernier for fine interpolation. This arrangement simplifies the concept of graduated movement, so teams can rely on measured shifts rather than guesswork. The readable markings combined with tactile knobs allow precise incremental steps and straightforward documentation of sample coordinates, aiding repeatable observation and straightforward handover between users. Practical benefits for workshops and teaching environments This platform is particularly attractive where a compact footprint and dependable mechanical control are required. The stage supports routine microscopy workflows by enabling controlled sample scanning and documented positioning without the need for electronic drives. Its practical design contributes to a cost-effective upgrade path for institutions and small laboratories seeking measurable gains in handling efficiency. If clarification is needed regarding compatibility or intended use, assistance is available to help match the stage to the specific microscope stand or application. Contact Metav Werkzeuge today for tailored advice and to secure this attachable stage for improved sample alignment on every microscope Technical data Article number: EC.9500 SKU: EC.9500 Model series: EcoBlue Product type: microscope stage Brand: Euromex Measurements / Performance Translation range: 51 × 26 mm Special features / Design Attachable mechanical X‑Y stage Double vernier scale Separate horizontal adjustment knobs Suitable for microscopes (education and routine laboratory use) FAQ How much lateral travel does the stage provide? The EcoBlue EC.9500 offers a translation range of 51 × 26 mm, enabling controlled lateral movement across typical specimen sizes. Is the stage compatible with different microscope stands? The attachable design is intended for common microscope frames and adapts the inspection bench to controlled X‑Y movement without complex installation. How does the double vernier support fine positioning? The double vernier gives a coarse main scale and a secondary finely graduated vernier, allowing precise interpolation for repeatable specimen placement. Is the mechanism suitable for classroom use? Yes, the robust mechanical design and clear readout make the platform well suited to educational environments and routine laboratory tasks. Can the stage be used for documentation of sample positions? The readable scales and tactile knobs enable documented and reproducible positioning, aiding routine inspection and repeated observations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
530nm First-Order Red 1/λ Plate in Slider for Reflected Light iScope Polarisation Models, ISO Standard - Euromex
Take advantage of precise polarisation control, reliable 530 nm retardation and quick slider insertion for reproducible contrast in incident‑light applications; order the 1λ plate, first‑order red 530 nm in slider for incident‑light illumination for iScope polarising models IS.9610-R directly via Metav Werkzeuge or ask our consultants if needed. 1λ plate, first-order red 530 nm in slider for incident-light illumination for iScope polarising models (Euromex IS.9610-R) The 1λ plate, first‑order red 530 nm in slider for incident‑light illumination for iScope polarising models is a compact optical compensator designed for insertion into the incident‑light path to enhance birefringence contrast and standardise colour response in polarised light microscopy. First‑order red 530 nm retardation Slider mount for fast insertion Compatible with iScope polarising models Faster, reproducible contrast for polarised light inspection The 1λ plate supplies a constant 530 nm retardation, converting subtle phase differences into a stable colour shift that simplifies interpretation of stress patterns and birefringent structures. Mounted in a slider, the compensator is ready for rapid engagement or removal without disturbing the sample stage, which supports consistent imaging routines and reduces downtime between measurements. For laboratories requiring repeatable visual references, the fixed first‑order red response acts as a reliable optical standard. Clear optical reasoning that non‑specialists can follow A retarder or compensator introduces a known phase delay between orthogonal polarisation components; the first‑order red plate creates a single‑wavelength retardation equivalent to one lambda at roughly 530 nm, producing a characteristic red‑green colouration under cross polarisation. This controlled colour response makes it easier to distinguish materials and stress fields without complex calibration equipment. The effect is directly observable in transmitted or reflected light set‑ups that support incident‑light polarisation, aiding rapid assessment and documentation. Practical compatibility and application scenarios Engineered for iScope polarising units, the insert fits into the dedicated slider for incident‑light illumination, ensuring mechanical and optical alignment with the existing polariser/analyser train. Typical applications include qualitative stress analysis, contrast enhancement for transparent or semi‑transparent specimens, and routine teaching demonstrations where consistent visual cues accelerate learning. The compact format integrates with bench workflows, supporting both quick inspections and stepwise imaging protocols. Integration benefits and operational reliability Using a purpose‑made 1λ compensator minimises variability between sessions and operators, which contributes to stronger data comparability across samples and time. The slider mechanism enables safe handling and keeps the optical surface accessible for inspection and cleaning. Where image reproducibility and clear birefringence rendering are essential, this accessory provides a straightforward optical upgrade that harmonises with the existing iScope polarising configuration. For standardised polarisation contrast, select the Euromex IS.9610-R first‑order red 1λ plate and contact Metav Werkzeuge for product advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: IS.9610-R SKU: IS.9610-R Manufacturer: Euromex Product type: Microscope illumination Label: 1/λ‑plate first red 530 nm in slider for incident‑light illumination for iScope polarisation models Facts Wavelength: 530 nm Order: first‑order (1λ) Special features Slider mount for incident‑light path insertion Designed for iScope polarising models Provides first‑order red retardation for birefringence contrast FAQ What visual effect does the first‑order red 530 nm plate produce? The first‑order red plate produces a characteristic red‑green colouration under crossed polarisers, transforming phase differences into an immediate visual contrast that the Euromex IS.9610-R makes easy to observe. Is the slider compatible with all iScope polarising models? The slider is designed for iScope polarising models that accept accessory inserts; check the specific iScope configuration to confirm mechanical fit with the Euromex IS.9610-R. Can the retarder be used in reflected (incident) light only? The accessory is specified for insertion into the incident‑light path; its effect is optimised for reflected‑light polarising set‑ups on compatible iScope units. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
530nm First-Order Red Wave Plate in Slider for Transmitted Light Polarisation Microscope Lighting - Euromex
Take advantage of precise polarisation control and straightforward integration: the 530 nm first-order retardation and slider mounting ensure consistent transmitted-light contrast for polarised microscopy workflows. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice and delivery from Emmerich. 1/λ Plate First-Order Red 530 nm Slider for iScope Polarisation Models IS.9610 — Transmitted-Light Retarder by Euromex The 1/λ Plate First Red 530 nm (IS.9610) is a dedicated first-order retarder in a slider mount, designed for transmitted-light illumination within iScope polarisation model ranges to enhance contrast and reveal birefringent structures. First-order red retardation 530 nm Slider mount for transmitted light illumination Compatible with iScope polarisation models Accurate polarisation control for inspection and analysis The first-order (1/λ) retardation at 530 nm provides a well-defined phase shift for transmitted-light polarisation microscopy, facilitating reliable identification of birefringent materials. As a retarder plate, it produces a controlled colour shift that makes internal stresses, fibre orientations and crystalline structures visible; this enables repeatable results in quality control and material analysis. The optical specification is concise and directly supports quantitative interpretation of polarised images, reducing ambiguity during inspections. Simple integration and operational efficiency Mounted in a slider for transmitted-light illumination, this retarder is intended for quick insertion and removal from the optical path, allowing efficient alternation between polarised and non-polarised observation modes. The compact slider format minimises downtime during sample changes and supports workflows in teaching laboratories and production inspection benches. Compatibility with the iScope polarisation range means the accessory aligns with established holders and illumination geometries, maintaining optical alignment without additional adapters. Reliability for routine laboratory and teaching use Designed as an accessory for polarisation-capable microscopes, the component emphasises stability and consistent optical performance over repeated use. The defined 530 nm wavelength target ensures predictable interference colours, aiding both novice users and experienced microscopists in interpretation. When used in routine examinations, the plate contributes to faster decision making through clearer contrast and enhanced visibility of anisotropic materials, supporting productivity in both research and industrial environments. For component supply or technical clarification on the Euromex 1/λ Plate First-Order Red 530 nm (IS.9610), contact Metav Werkzeuge to arrange delivery from Emmerich and confirm compatibility with an existing iScope polarisation setup. Technical Data Article number: IS.9610 Manufacturer: Euromex Product type: Microscope illumination SKU: IS.9610 Facts Wavelength: 530 nm Retarder type: First-order (1/λ) Mount: Slider for transmitted-light illumination Compatibility: iScope polarisation models Special features Brand: Euromex Function: Enhances birefringence contrast Application: Polarisation microscopy, transmitted light Inclusion: Slider-mounted plate for quick use FAQ What optical effect does the 1/λ plate produce? The 1/λ plate (first-order red at 530 nm) introduces a fixed phase shift that creates characteristic interference colours, enabling clearer visualisation of birefringent structures when used with crossed polarisation on the Euromex 1/λ Plate First-Order Red 530 nm (IS.9610). Is this plate compatible with all iScope polarisation models? The IS.9610 is designed for iScope polarisation model ranges; it fits the slider slot used for transmitted-light polarisation accessories and is specified to match the geometry of those models. How does the slider mount benefit routine use? The slider format allows rapid insertion and removal of the retarder from the optical path, which reduces interruption during sample changes and supports quick switching between polarised and non-polarised observations with minimal realignment. Can this retarder be used for teaching as well as production inspections? Yes, the clear interference colours at 530 nm and the straightforward slider operation make it suitable for both educational demonstrations and consistent inspection tasks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Nylon Carry Case For iScope bScope StereoBlue Oxion BioBlue.lab, 58(H) x 32(L) x 24(P) - Euromex
Take advantage of a durable nylon construction, wide model compatibility and compact internal dimensions for safe, space-saving transport of microscopes; order via Metav Werkzeuge or contact our consultants for precise fit advice. Nylon Carrying Bag AE.9919 – Microscope carrying bag with 58 × 32 × 24 cm internal dimensions, compatible with multiple Euromex microscope models Nylon Carrying Bag AE.9919 is a tailored transport solution for iScope, bScope, StereoBlue, Oxion and BioBlue.lab microscopes, designed to keep instruments organised and protected during storage and transit Durable nylon construction for everyday use Compatible with iScope, bScope, StereoBlue, Oxion, BioBlue.lab Internal size: 58 × 32 × 24 cm Secure protection and clear technical fit for workshop use The nylon outer material provides a resilient barrier against light wear and dust, while the clearly stated dimensions—58 (H) × 32 (L) × 24 (D) cm—allow reliable assessment of fit for common benchtop microscopes. Listing the supported models ensures straightforward compatibility checking: the bag is specified for iScope, bScope, StereoBlue, Oxion and BioBlue.lab, so selection is driven by measured instrument size rather than guesswork. This transparent, data-led specification reduces the risk of returns and supports uninterrupted workflow in laboratories and service shops. Practical handling and storage that speeds daily routines Compact internal proportions make the bag simple to stow on shelving or in vehicle lockers, and the lightweight fabric keeps handling effortless during instrument transfers between sites. The clear model list streamlines purchasing decisions in procurement processes: procurement teams can match the carrying solution to device type without further measurements. If clarification is needed regarding fit or intended use, technical enquiries may be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance from the central distribution hub. Confidence in supply and a partner for precision Metav’s position as a precision partner means the product is offered through a supplier that prioritises availability and quality control across Europe. The pragmatic logistics from Emmerich serve as a quality filter for incoming stock, and a broad portfolio supports consolidated sourcing strategies. For workshops and trade customers seeking consistent delivery and verified compatibility, this transport solution is integrated into an established supply chain that eases procurement and operational planning. For secure and reliable transport of delicate instruments, contact Metav Werkzeuge for tailored advice on the AE.9919 nylon carrying bag and delivery directly from our Emmerich warehouse. Technical Data Article number: AE.9919 SKU: AE.9919 Brand: Euromex Product type: Microscope carrying bag Facts Internal dimensions: 58 × 32 × 24 cm Height × Length × Depth format indicated Special features Material: Nylon Compatible with: iScope, bScope, StereoBlue, Oxion, BioBlue.lab FAQ What microscopes fit in this carrying bag? The AE.9919 nylon carrying bag is specified for iScope, bScope, StereoBlue, Oxion and BioBlue.lab microscopes and fits those models within the stated internal dimensions. Is the material suitable for workshop use? Yes; the bag’s nylon construction is chosen for everyday workshop and laboratory environments where dust resistance and ease of handling are required. How should the internal dimensions be interpreted? Dimensions are given as Height × Length × Depth: 58 × 32 × 24 cm, which should be checked against the instrument’s assembled height and footprint before purchase. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5x Wide Field Microscope Eyepiece 18mm Field Number, WF 5x/18mm - Euromex
Take advantage of the combination of a wide-field optical design, clear 5× magnification and a practical field number for fast specimen orientation in teaching and routine inspection. Order the eyepiece directly via Metav Werkzeuge or contact our consultants for application advice. Euromex AE.5571 Wide-field Eyepiece — 5×, FN 18 mm The AE.5571 is a wide-field microscope eyepiece providing 5× magnification and an 18 mm field number for efficient overview imaging in educational and laboratory applications Wide-field eyepiece, field number 18 mm 5× magnification for low-power overview Suitable for educational and lab microscopes Faster specimen orientation with a wide visual field The combination of 5× magnification and a field number of 18 mm delivers a notably larger apparent field than standard eyepieces, enabling quicker scanning of slides and faster localisation of areas of interest. For technicians and instructors who regularly need to move between samples, the broader view reduces the need for repeated stage adjustment and shortens inspection cycles. The optical design emphasises an unobstructed visual experience, making it simpler to survey a specimen before switching to higher-power objectives. Built to support teaching and routine inspection work A wide-field eyepiece such as this is particularly suited to classroom benches and busy lab benches where speed and clarity matter. The generous field aids group demonstrations and rapid demonstrations under the microscope, while also helping novice users to keep track of the specimen during live manipulation. The configuration is compatible with common educational and analytical microscopes, offering a practical balance between overview and detail without complicating the optical train. Clearer viewing explained in plain terms The field number (FN 18 mm) is a standard optical specification that describes the diameter of the image circle seen through the eyepiece; a larger FN gives a wider observable area at the eye. In practical terms, with this eyepiece the visible scene appears broader at the same objective magnification compared with smaller-FN eyepieces. This means less panning across the stage and a more comfortable viewing session, particularly during extended observation. The 5× power provides a low-magnification perspective that is ideal for initial orientation before moving to higher magnifications. Reliable sourcing and practical purchasing for workshops Sourcing optical components from a dependable distributor reduces risk and keeps workflows steady. Metav’s approach to distribution emphasises accessibility to precision tools for workshops and educational settings, backed by a broad product range and established logistics from Emmerich. For facilities looking to standardise bench setups or replace worn eyepieces, this eyepiece presents a straightforward specification that integrates into standard optical setups and supports consistent results across user teams. For practical advice on integration or to secure supply through Metav Werkzeuge, contact our sales team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants can advise on compatibility and delivery schedules Technical data Article number: AE.5571 SKU: AE.5571 Brand: Euromex Product type: Microscope eyepiece Source: Education PDF-S. 7,9,13 Facts Magnification: 5× Field number: 18 mm Special features Wide-field eyepiece Designed for educational and laboratory microscopes FAQ What magnification does this eyepiece provide? The eyepiece delivers 5× magnification, offering a low-power overview suitable for initial specimen orientation. What does the field number 18 mm mean for everyday use? A field number of 18 mm indicates a wider apparent field of view, which helps to scan slides more quickly and reduces the amount of stage movement required. Is this eyepiece suitable for teaching microscopes? Yes, the wide-field design and modest magnification make it well suited to educational settings and routine laboratory inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5x Wide Field Microscope Eyepiece 22 mm Field Number, WF 5x/22 mm - Euromex
Benefit from precise 5x magnification combined with a wide-field 22 mm view to speed up routine inspections and reduce eye movement; the matched optical set ensures reliable, repeatable observation. Order the microscope eyepiece directly via Metav Werkzeuge or consult our specialists for suitability and supply. Microscope eyepiece EduBlue ED.6005 — 5x wide-field eyepiece by Euromex Microscope eyepiece EduBlue ED.6005 offers a wide visual field and comfortable overview for stereomicroscope inspection and educational use Wide-field 22 mm eyepiece 5x magnification for broad overview Designed for stereomicroscopes EduBlue optical quality Wider view for faster, more efficient inspections The 5x magnification of this eyepiece provides a lower-power overview that helps operators locate features quickly before switching to higher-power objectives. With a 22 mm field number, the eyepiece supplies a wide field of view that reduces the need for stage movement and repeated refocusing. For routine inspection tasks, that translates into measurable time savings and a smoother visual workflow, particularly where larger sample areas must be scanned systematically. Matched optics for stereomicroscope pairs and educational settings Supplied as a pair, the eyepieces are intended for binocular stereomicroscopes and deliver balanced images across both optical channels. The matched optics reduce image disparity and help maintain stereoscopic depth perception during prolonged use. In classrooms and training labs, the combination of low magnification and broad field supports rapid demonstrations and comfortable group observations without compromising image coherence. Comfortable observation that supports quality control A wider apparent field typically reduces eye fatigue because less panning and readjustment are required during inspections; this eyepiece emphasises optical clarity and operator comfort to maintain focus during extended sessions. The design is suited to visual quality checks, component sorting and preparatory work prior to detailed measurement, enabling technicians to maintain consistent inspection routines with less visual strain. Clear selection, compatibility and trusted supply chain As part of the EduBlue series, this eyepiece aligns with a practical selection strategy: choose a low-power, wide-field ocular to complement higher-power objectives for a complete inspection workflow. Compatibility with standard stereomicroscope binocular heads makes integration straightforward; for any specific compatibility queries or additional technical data, Metav’s specialists can confirm fit and delivery options. Contact details are available for questions about suitability and further specifications. For dependable optical accessories and professional advice on the EduBlue ED.6005, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply and compatibility guidance. Technical Data Article number / SKU: ED.6005 Manufacturer: Euromex Model series: EduBlue Product type: Microscope eyepiece Source: Education PDF S. 29,38 Core specifications Magnification: 5x Field number: 22 mm Intended use: For stereomicroscopes Features and compatibility Wide-field eyepiece, WF 22 mm Supplied as a pair for binocular heads EduBlue optical series FAQ Are these eyepieces compatible with standard stereomicroscope binocular heads? Yes. The EduBlue ED.6005 eyepieces are designed for use with stereomicroscopes and are supplied as a matched pair for binocular heads. What does the 22 mm field number mean in practice? A field number of 22 mm indicates a comparatively wide apparent field with the 5x eyepiece, so the visible area through the ocular is larger than with lower field-number eyepieces. Are the eyepieces sold as individual units or as a pair? The EduBlue ED.6005 is supplied as a pair suitable for binocular stereomicroscopes to ensure matched optical performance. Will a 5x eyepiece affect total system magnification? The eyepiece magnification contributes to the overall system magnification together with the microscope’s objective; the final image scale depends on the objective and microscope configuration. Is this eyepiece suitable for educational laboratories? Yes. The combination of 5x magnification and a wide-field 22 mm view makes the eyepiece well suited to teaching, demonstrations and introductory inspection tasks. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6 MP Cooled Microscope Camera 2748 x 2200 CCD 1-Inch, USB 3.0 Peltier Cooling - Euromex
Take advantage of the combination of high sensitivity, stable cooled imaging and fast USB 3.0 data transfer for reliable documentation and measurement. Order the cooled 6‑MP microscope camera directly via Metav Werkzeuge or ask our consultants if needed. Cooled 6‑MP microscope camera DC.6000i — Euromex CMEX i, CCD 1‑inch, USB 3.0 The Cooled 6‑MP microscope camera DC.6000i is a high‑resolution imaging module designed for laboratory and industrial microscopy applications where low noise and accurate image detail are required High‑resolution 6 MP sensor Peltier cooling for low noise USB 3.0 high‑speed interface Includes ImageFocus Alpha software Accurate images for measurement and documentation The DC.6000i delivers 6 MP stills at 2748 x 2200 pixels on a CCD 1‑inch sensor, which provides a larger photosensitive area than typical smaller sensors and therefore a higher baseline sensitivity. The comparatively large pixel size (4.54 x 4.54 µm) helps to collect more light per pixel, which translates into clearer detail in micrographs and improved reproducibility for metrology tasks. For inspection and documentation, a wider dynamic range (62.34 dB) and a solid signal‑to‑noise ratio (41.6 dB) reduce the risk of lost detail in high‑contrast scenes, so that measurement routines and image analysis yield consistent data. Stable performance under long exposures and low light Thermal noise is a common obstacle for long exposures and low‑light imaging; the integrated Peltier cooling reduces sensor temperature and thus lowers dark current, enabling longer exposures with less noise. The module’s stated sensitivity (880 mV at 1/30 s) and the cooled sensor design are optimised for demanding inspection tasks that require high fidelity rather than only speed. Reported image rates apply under optimal conditions: 7.5 fps at full resolution and 14 fps at reduced vertical resolution, which support both careful documentation and live observation when faster previews are needed. Integration, workflow and software compatibility The camera uses a USB 3.0 connection for fast data transfer and straightforward integration into standard laboratory workstations. Supplied control and capture via ImageFocus Alpha enable image capture, basic measurement and batch export without extensive custom development. The device is digital by design and suitable for automated capture workflows when paired with image processing systems; the compact interface and well‑specified frame rates make the module a practical choice for inspection benches and teaching laboratories alike. The Euromex DC.6000i supports typical microscopy setups that require a combination of image quality and predictable data throughput. For project quotations, technical clarifications or to request additional image samples for the Euromex DC.6000i, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice and delivery from Emmerich Technical data Article number: DC.6000i Manufacturer: Euromex Model series: CMEX i Product type: Cooled microscope camera Connection: USB 3.0 Facts Resolution: 6 MP (2748 x 2200 pixels) Sensor: CCD 1 inch Pixel size: 4.54 x 4.54 µm Frame rate: 7.5 fps at 2748 x 2200; 14 fps at 2748 x 1092 Dynamic range: 62.34 dB Signal‑to‑noise ratio: 41.6 dB Sensitivity: 880 mV at 1/30 s Special features Peltier cooling ImageFocus Alpha software Digital output USB 3.0 high‑speed interface FAQ What image resolutions and frame rates are available with this camera? The camera captures up to 2748 x 2200 pixels (6 MP); the Euromex DC.6000i delivers 7.5 fps at full resolution and 14 fps at 2748 x 1092 under optimal conditions. How does the cooling affect image quality? Integrated Peltier cooling lowers the sensor temperature, reducing thermal noise and enabling longer exposures with less dark current in the DC.6000i, which improves signal quality for low‑light and long‑exposure work. Is special software required to operate the camera? The camera is supplied with ImageFocus Alpha for capture and basic measurement functions; the DC.6000i can also be integrated into custom workflows via its USB 3.0 digital interface. Which sensor type is used and what are the benefits? A CCD 1‑inch sensor is used in the DC.6000i; its larger photosensitive area and 4.54 µm pixels increase sensitivity and dynamic range compared with smaller sensors, supporting precise documentation. Is the camera suitable for industrial inspection as well as laboratory use? Yes. The Euromex DC.6000i’s combination of high resolution, cooled sensor and reliable USB 3.0 connectivity makes it appropriate for both laboratory microscopy and controlled industrial inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com