60mm 60x iScope Microscope Objective 0.14 mm Working Distance, NA 0.85 - Euromex
Take advantage of the combination of high magnification, excellent light gathering and precise short-range focusing to reveal fine detail with confidence; order the objective directly via Metav Werkzeuge or consult our specialists for specification support. iScope IS.7260 microscope objective — 60x, NA 0.85 (Euromex) The iScope IS.7260 microscope objective is a high-resolution 60x objective designed for close-focus life science and educational microscopy, delivering enhanced contrast and detail at short working distances. 60x magnification for high detail Numerical aperture 0.85 for improved resolution Working distance 0.14 mm for close focus High-resolution imaging driven by optical performance The combination of 60x magnification and a numerical aperture (NA 0.85) provides a notable uplift in resolving power and contrast when inspecting fine structures. A higher numerical aperture increases light collection and reduces the diffraction limit, which directly improves resolution in brightfield and many contrast-enhancing techniques. For laboratories that depend on precise observation, this optical configuration supports clearer distinction of subcellular features and fine material textures, translating to more reliable visual analysis and fewer repeat measurements. Close working distance: benefits and handling considerations A working distance of 0.14 mm enables the objective to focus extremely close to the specimen plane, which is instrumental when imaging thin sectionsor coverslip-mounted samples, or when maximising numerical-aperture performance. This proximity improves image brightness and detail but requires compatible sample preparation and careful stage control to avoid contact. The objective’s optical design, referenced as S60x/0.85 IOS PLi in the manufacturer documentation, balances compact geometry with high light throughput to maintain image quality at these short distances. Suited applications and laboratory integration Engineered for education and life science contexts, the objective excels where detailed rapid inspection is required, such as cell morphology, histology slides and fine-feature materials inspection. The design integrates with standard microscope optical systems that accept lab objectives, enabling straightforward replacement or upgrade paths in many rigs. For purchase and technical clarification, Metav Werkzeuge supplies advice and logistic support from Emmerich, ensuring compatibility checks and reliable delivery for research benches and teaching suites. Contact Metav Werkzeuge today to discuss how the Euromex iScope IS.7260 objective can enhance imaging precision in the laboratory; Metav Werkzeuge provides specification support and delivery from Emmerich for seamless integration into existing microscope setups Technical data Article number: IS.7260 Manufacturer: Euromex Model series: iScope Product type: microscope objective SKU: IS.7260 Facts Magnification: 60x Working distance: 0.14 mm Numerical aperture: 0.85 Special features S60x/0.85 IOS PLi objective (manufacturer designation) Source references: Education PDF p.25; Life Science PDF p.16, p.42, p.43 Category: for microscopes (microscopy accessory) FAQ What level of detail can be expected with this objective? The Euromex iScope IS.7260 objective, with 60x magnification and NA 0.85, improves the ability to resolve fine structural detail compared with lower-NA objectives, making it suitable for demanding observational tasks. Is the short working distance of 0.14 mm a limitation for routine use? The 0.14 mm working distance of the IS.7260 enables high-NA performance but requires precise specimen mounting and careful stage control to prevent contact; when managed correctly, the short distance enhances brightness and resolution. Which sample types are appropriate for this objective? Thin, coverslip-mounted specimens and prepared slides are the primary application area for the IS.7260, where close focus and high numerical aperture yield the greatest benefit in contrast and detail. Does the objective fit standard microscope mounts? The IS.7260 is supplied as a microscope objective intended for integration with compatible microscope optical systems; verification of thread type or nosepiece compatibility is recommended before installation. Where do the technical specifications originate? Specifications such as 60x, NA 0.85 and WD 0.14 mm are referenced from the manufacturer documentation (Education and Life Science PDFs cited in the product data). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm 60x Microscope Objective 0.19 mm Working Distance 0.85 NA - Euromex
Take advantage of high optical resolution and a compact working distance to improve imaging precision, while benefiting from straightforward integration into iScope-series systems; order directly via Metav Werkzeuge or request advice from our technical consultants. iScope IS.7160 microscope objective by Euromex — 60x, NA 0.85 The iScope IS.7160 is a 60x microscope objective designed for high‑resolution life‑science imaging with a short working distance and high numerical aperture. 60x magnification for detailed imaging High numerical aperture 0.85 for superior resolution Short working distance 0.19 mm for close inspection Designed for iScope series microscope systems Exceptional resolution where detail matters The combination of 60x magnification and a numerical aperture (NA) of 0.85 delivers markedly improved resolving power compared with lower‑NA optics. A higher NA increases light‑gathering capability, which results in clearer, higher‑contrast images of fine structures; this is particularly relevant for cellular and microstructural observation. The optical specification helps reduce diffraction limits, meaning the lens produces finer detail without complex post‑processing, a clear advantage for routine analytical tasks and documentation workflows. Compact working distance for demanding sample access A working distance of 0.19 mm places the optical plane very close to the specimen, enabling high‑magnification inspection of flat or thin samples and facilitating immersion‑style measurements where applicable. Because the distance is short, mechanical staging and sample preparation can be optimised to maintain focal stability and repeatability. The tight optical geometry benefits laboratories where maximum spatial resolution and image fidelity are critical for measurement, annotation or quality control tasks. Reliable integration and consistent imaging results Built for the iScope series, this objective matches system mounts and optical paths to ensure predictable performance during routine use. The lens construction emphasises consistent focal characteristics and stable alignment, reducing the need for frequent recalibration. For facilities consolidating optics across a fleet of microscopes, the predictable behaviour of this objective supports reproducible results and shortens training time for operators unfamiliar with specialised optics. Choose the Euromex iScope IS.7160 for optical precision in high‑magnification applications and contact Metav Werkzeuge for tailored technical advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930, where product specialists can assist with specifications and compatibility details Technical Data Article number: IS.7160 SKU: IS.7160 Manufacturer: Euromex Model series: iScope Product type: microscope objective Facts Magnification: 60x Working distance: 0.19 mm Numerical aperture: 0.85 Special features High numerical aperture for enhanced resolution Short working distance for close specimen access Described in Education and Life Science PDFs (source references) FAQ What magnification does this objective provide? The Euromex iScope IS.7160 provides 60x magnification suitable for high‑detail imaging. How does the numerical aperture affect image quality? A numerical aperture of 0.85 increases light collection and resolving power, so the iScope IS.7160 delivers sharper, higher‑contrast images at high magnification. Is the working distance suitable for thin samples? Yes, the 0.19 mm working distance of the lens is optimised for close inspection of thin or flat specimens. Can this objective be used with other iScope systems? The objective is designed for the iScope series and aligns with the optical and mechanical mounts used by those systems for consistent integration. Where can further specifications be found? Detailed data and application notes for the iScope IS.7160 are provided in the Life Science and Education PDFs cited in the product documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm 60x Microscope Objective 0.20 mm Working Distance, NA 0.85 - Euromex
Take advantage of the combination of 60x magnification, a numerical aperture of 0.85 and a finely tuned 0.20 mm working distance for exceptional detail capture in microscopy applications; order the objective directly via Metav Werkzeuge or consult our specialists for integration advice. bScope BS.7160 microscope objective — 60x, NA 0.85 by Euromex The bScope BS.7160 is a high-magnification microscope objective designed for life science and educational microscopy, offering 60x power combined with a 0.20 mm working distance for fine-detail imaging. 60x magnification for detailed observation Numerical aperture 0.85 for high resolution 0.20 mm working distance for close-range imaging Part of the bScope series by Euromex Exceptional resolving power for demanding imaging tasks The combination of 60x magnification and a numerical aperture (NA) of 0.85 delivers noticeable improvements in resolution and light collection compared with lower-NA optics. Higher NA increases the objective’s ability to distinguish close features and enhances contrast under transmitted-light techniques, which makes this objective particularly valuable for detailed cell morphology, stained specimen work and advanced student laboratory tasks. The optical performance is optimised to produce sharper images with improved structural clarity, enabling more reliable visual analysis in both routine and investigative workflows. Precise close-range operation with a short working distance A 0.20 mm working distance means the front lens sits very close to the specimen plane, which is a deliberate design choice to achieve the maximum resolving capability of the lens. This proximity improves numerical aperture performance and image fidelity, but it also requires careful sample preparation and stage handling. For thin or mounted specimens and cover-glass preparations, the short working distance is an advantage: the objective delivers greater detail without the need for excessive illumination, while preserving optical contrast and reducing spherical aberration when used under appropriate mounting conditions. Easy integration into educational and laboratory setups Belonging to the bScope model series, this microscope objective is suitable for microscopy setups in teaching laboratories and life science benches where high magnification is required. The objective’s specification is documented in the manufacturer literature, making selection straightforward for procurement and inventory. Users benefit from consistent optical performance across the series, which simplifies curriculum planning and workflow standardisation in multi-user environments. The balanced design supports routine use while maintaining the precision expected in laboratory contexts. Who benefits and when to check specifications This objective is aimed at educators, laboratory technicians and researchers who require enhanced optical detail for observation and documentation. It is particularly useful for applications where structural detail and contrast are decisive factors. If there is any uncertainty about compatibility with a particular microscope stand, condenser or imaging system, consult the product literature or request further technical clarification; the objective’s core specifications—60x, NA 0.85 and 0.20 mm working distance—should be compared with the existing optical train to ensure optimal performance. Contact Metav Werkzeuge today for tailored advice on adding the Euromex bScope BS.7160 to laboratory equipment lists; our Emmerich team will assist with specification checks and procurement to ensure a seamless fit with existing microscopes. Technical data Article number: BS.7160 Manufacturer part number: BS.7160 Manufacturer: Euromex Facts Magnification: 60x Numerical aperture: 0.85 Working distance: 0.20 mm Special features Product type: Microscope objective Model series: bScope Category path: Microscopy accessories > Objectives > For microscopes Specification references: Education PDF S.21; Life Science PDF S.9 FAQ What level of magnification does this objective provide? The Euromex bScope BS.7160 microscope objective (SKU BS.7160) provides 60x magnification, suitable for detailed inspection of prepared slides and fine structural analysis. How does the numerical aperture affect image quality? The numerical aperture of 0.85 of the bScope BS.7160 increases resolution and light-gathering capacity, improving contrast and the ability to resolve closely spaced features during observation. Is the short working distance a limitation for certain samples? The 0.20 mm working distance of the Euromex bScope BS.7160 is ideal for thin, cover-glass-mounted specimens; for thicker samples or non-standard mounts, compatibility with the microscope’s stage and condenser should be checked. Can this objective be used in teaching laboratories? Yes, the bScope BS.7160 is designed to support life science and educational microscopy where higher magnification and resolution are required, making it suitable for advanced teaching and training settings. Where can one find the official specifications for verification? Manufacturer literature lists the objective’s core values—60x, NA 0.85, WD 0.20 mm—and the details are referenced in the Euromex product documentation cited in the specification sources. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm 60x Microscope Objective 0.3 mm Working Distance 0.80 NA - Euromex
Take advantage of the combination of 60x magnification, a numerical aperture of 0.80 and the very short 0.3 mm working distance for exceptional detail in high-resolution imaging; order the Delphi‑X Observer DX.7260 directly via Metav Werkzeuge or consult the specialists for integration advice. Delphi-X Observer DX.7260 – 60x microscope objective, NA 0.80 (Euromex) Delphi-X Observer DX.7260 is a high-power microscope objective engineered for close-up life science imaging and applications requiring superior resolution in compact sample spaces. High 60x magnification for detailed observation Numerical aperture 0.80 for superior resolution 0.3 mm working distance for close-up imaging Compatible with Delphi‑X Observer series Outstanding resolving power for demanding imaging tasks The 60x specification combined with a numerical aperture of 0.80 delivers a notable increase in light-gathering capability and lateral resolution compared with lower-NA objectives. In practical terms, the higher aperture allows finer structural details to be resolved and enhances contrast when observing stained specimens or thin sections. For laboratories aiming to document cellular morphology or microstructural surface features, the objective’s optical design provides a measurable improvement in image clarity, reducing the need for post-processing while improving confidence in captured data. Compact working distance for high-detail sample inspection A 0.3 mm working distance is deliberately short to permit imaging at high magnification with minimal optical compromise. This close proximity suits thin coverslips, mounted slides and surface-sensitive samples where immersion is not required or where very small focal depths are necessary. The short working distance requires considered sample preparation and stage control; however, it enables tighter focal planes and sharper detail at the specimen surface, which is indispensable for precise observational tasks and for applications where depth discrimination is critical. Designed for life‑science workflows and reliable compatibility Belonging to the Delphi‑X Observer series by Euromex, this objective is intended for incorporation into advanced microscopy setups used in educational, research and clinical environments. The optical parameters are tailored to support brightfield and contrast-enhancing techniques commonly applied in biological laboratories. Integration into compatible trinocular or modular microscope heads ensures that imaging performance is preserved across a range of observation and documentation workflows, making the objective a robust choice for routine high-magnification examinations. Confidence through recognised supply and application support Selection of precision optics is an instrumental decision for any microscopy facility; the combination of high numerical aperture and 60x power represents a commitment to resolution and traceable imaging outcomes. Metav’s positioning as a precision partner ensures that the objective is supplied through an experienced distribution channel that emphasises product reliability and availability for the European market. For additional technical clarification or to confirm suitability for a specific application, concise technical guidance is available via the stated contact channels. Contact Metav Werkzeuge today to discuss fitting the Delphi‑X Observer DX.7260 into existing microscopy workflows or to request detailed technical documentation and compatibility advice from the Metav consultants. Technical Data Article number: DX.7260 SKU: DX.7260 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Facts Magnification: 60x Numerical aperture: 0.80 Working distance: 0.3 mm Special features S60x/0.80 PLi objective design Source: Life Science PDF, pp. 26, 49 Intended for close-up life science imaging FAQ What level of detail can be expected with this objective? The Delphi‑X Observer DX.7260, with its 60x magnification and 0.80 numerical aperture, enables high-resolution visualisation of fine cellular and microstructural detail suitable for demanding observational tasks. Is the DX.7260 suitable for use with standard brightfield illumination? Yes, the DX.7260 is designed for common brightfield workflows and performs well under standard transmitted-light illumination systems used in life science microscopy. Does the short working distance restrict sample types? The 0.3 mm working distance favours thin specimens and surface-focused imaging; mounted slides and thin coverslips are the most suitable sample types for optimal results with this objective. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm 60x S60x/0.80 PL Objective WD 0.19 mm, Numerical Aperture 0.80 - Euromex
Take advantage of the combination of 60x magnification, a 0.80 numerical aperture and a very short working distance to achieve detailed, high-contrast imaging in compact sample setups; order this precision optical component through Metav Werkzeuge or request specialist advice for integration into the laboratory workflow. BioBlue.Lab BB.8860 microscope objective — 60x, NA 0.80 BioBlue.Lab BB.8860 is a high-magnification microscope objective intended for life science and educational microscopy, offering short working distance performance for close specimen observation. 60x magnification for detailed imaging Numerical aperture 0.80 for high resolution Working distance 0.19 mm for close specimen approach Precision optics for reliable imaging The objective delivers 60x magnification combined with a numerical aperture of 0.80, which directly improves resolving power and light-gathering capability. A larger numerical aperture increases the range of spatial frequencies the system can capture, so fine structural detail appears sharper and contrast is enhanced. The specification working distance of 0.19 mm indicates the lens-to-specimen spacing at focus; although short, this distance enables close observation of thin or mounted samples while minimising optical aberrations. Such optical characteristics make the component suitable where clarity and fine resolution are required in compact setups. Designed for life science and education imaging From the BioBlue.Lab series, this lens is optimised for routine microscopy tasks in teaching laboratories and life science environments that demand consistent detail reproduction. The objective’s combination of 60x magnification and high numerical aperture of 0.80 yields improved depth of field control for thin sections and cellular work. The construction is intended for standard optical microscope nosepieces and condenser configurations; the result is a reliable imaging element that supports precise observation without complex adjustments, reducing time spent on setup and alignment. Interpreting numerical aperture and working distance in practice The numerical aperture of 0.80 primarily governs resolution and brightness: higher values enable the detection of subtler structural features and support higher-contrast imaging under transmitted or reflected light. The working distance of 0.19 mm is comparatively short, so specimens must be prepared accordingly and protective coverslips or slides kept flat to avoid contact. In routine use, the optical design helps maintain image flatness across the field, which reduces the need for extensive post-processing and allows faster throughput in repeated observations or teaching demonstrations. Integrating the objective into precise workflows Compatibility with standard microscope mounts makes the objective straightforward to introduce into established instrument setups. The optical parameters support critical inspection tasks and educational demonstrations where resolution and image fidelity matter most. For laboratories consolidating supplies, this objective is a compact, high-performance option to complement lower-magnification lenses and extend the range of achievable detail. Reliability in repeated imaging cycles promotes consistent results across samples and users, helping to streamline both measurement and documentation tasks. For tailored advice on integrating the Euromex BioBlue.Lab BB.8860 into a specific microscope and for priority dispatch from Emmerich, contact Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and order support Technical Data Article number: BB.8860 Manufacturer: Euromex Series: BioBlue.Lab Product type: Microscope objective SKU: BB.8860 Core data Magnification: 60x Working distance: 0.19 mm Numerical aperture: 0.80 Special features S60x/0.80 PL objective Source: Education PDF S.16; Life Science PDF S.12 FAQ What magnification does this objective provide? The Euromex BioBlue.Lab BB.8860 is specified as a 60x microscope objective and is designed for high-magnification observation. What does the numerical aperture of 0.80 mean for image quality? A numerical aperture of 0.80 increases resolving power and light collection, so the objective produces higher contrast and finer detail than lower-NA lenses. Is the short working distance a limitation for certain samples? A working distance of 0.19 mm requires careful specimen preparation and flat mounting; it is suitable for thin sections and coverslipped specimens but may be impractical for taller, unmounted samples. Can the objective be used on standard microscope nosepieces? The objective is intended for standard microscope mounting systems; check mechanical compatibility with the existing nosepiece and condenser before installation. Where can technical documentation for the objective be found? Detailed specifications were referenced from the product PDFs (Education and Life Science), which list the S60x/0.80 PL designation and working distance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm 60x S60x/0.85 Objective WD 0.50 mm, NA 0.85 - Euromex
Take advantage of the combination of 60x magnification, a numerical aperture of 0.85 and a 0.50 mm working distance for high‑resolution, close‑range observation in life‑science and educational microscopy; order the Euromex BioBlue.Lab BB.7260 directly via Metav Werkzeuge or ask our consultants if needed. BioBlue.Lab BB.7260 — microscope objective, 60x magnification and NA 0.85 (Euromex) BioBlue.Lab BB.7260 is a high‑performance microscope objective designed for demanding life‑science and educational applications, offering a finely balanced combination of resolution and close working distance for detailed specimen inspection. 60x magnification for detailed observation Numerical aperture 0.85 for high resolution 0.50 mm working distance for close imaging Exceptional optical resolution for demanding samples The objective delivers 60x magnification combined with a numerical aperture of 0.85, a pairing that increases the light‑gathering capability and lateral resolution of the imaging system. Higher numerical aperture translates directly into greater detail detection at a given magnification; this is particularly beneficial when resolving fine cellular structures or surface features. The optical performance is optimised for contrast and sharpness, so that structures which would otherwise be difficult to distinguish become observable under transmitted light. Technical terms such as numerical aperture are used here to explain performance: NA describes how effectively an objective collects light and influences resolving power. Close working distance adapted for high‑NA tasks With a 0.50 mm working distance the objective is configured for close‑up work where a short distance to the cover glass increases numerical aperture and image quality. Such a short working distance demands careful focusing and thin preparations, but it enables superior image detail for mounted or thin wet samples. The designation S60x/0.85 PLi indicates the optical class and immersion characteristics as published in the manufacturer documentation; this objective is therefore suitable where compact optical paths and high resolution are required. Mechanical compatibility with standard objective mounts should be verified on the specific microscope model before use. Practical benefits for laboratories and teaching environments Built within the BioBlue.Lab model series, this Euromex‑engineered objective balances robustness and optical quality for routine laboratory use and instructional settings. The configuration supports precise observation without complex alignment, while the design intent is to provide repeatable imaging results across sessions. Source data and verification are documented in the manufacturer literature (Education PDF‑S. 16; Life Science PDF‑S. 12), which clarifies the performance specifications and standard test conditions under which the optical characteristics were determined. For procurement, configuration advice or to secure the Euromex BioBlue.Lab BB.7260 through Metav Werkzeuge, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt assistance and ordering Technical data Article number: BB.7260 Manufacturer: Euromex Model series: BioBlue.Lab Product type: microscope objective SKU: BB.7260 Facts Magnification: 60x Numerical aperture: 0.85 Working distance: 0.50 mm Special features S60x/0.85 PLi objective Source: Education PDF‑S. 16; Life Science PDF‑S. 12 Label: Mikroskopobjektiv BioBlue.Lab BB.7260 FAQ What magnification and numerical aperture does this objective provide? The Euromex BioBlue.Lab BB.7260 is specified at 60x magnification with a numerical aperture of 0.85, which improves light collection and resolving power for fine structural detail. For which applications is the BioBlue.Lab BB.7260 best suited? The objective is intended for life‑science and educational microscopy where high‑resolution observation of thin or mounted specimens is required. What does a 0.50 mm working distance mean in practice? A 0.50 mm working distance indicates very close spacing between the front lens and the specimen; this supports higher numerical aperture but requires careful focusing and thin preparations to avoid contact. Where can detailed specification and verification data be found? Detailed technical specifications for the BioBlue.Lab BB.7260 are referenced in the Education and Life Science PDFs (see Education PDF‑S. 16 and Life Science PDF‑S. 12) supplied by the manufacturer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Black/White Stage Plate Precision Microscope Stage Plate, Ø60mm - Euromex
Compact platform with a removable black/white stage plate Ø 60 mm for improved specimen contrast and straightforward integration into stereomicroscope workflows; practical for education and workshop inspection tasks. Order the microscope stage directly via Metav Werkzeuge or ask our consultants if needed. EduBlue ED.9956 microscope stage – removable black/white stage plate Ø 60 mm The microscope stage EduBlue ED.9956 is a compact accessory for stereomicroscopes, designed to provide simple contrast control and a stable platform for small specimens. Compatible with stereomicroscopes Removable black/white stage plate Ø 60 mm Compact, low-profile mounting SKU ED.9956 for straightforward ordering Improved contrast for clearer inspection and documentation The removable black/white stage plate with a diameter of Ø 60 mm enables rapid background changes to enhance contrast during visual inspection or photography. By switching between the black and white surfaces, the platform aids in distinguishing fine edges and translucent specimens that would otherwise blend into a single tone. This practical contrast control reduces the need for complex illumination adjustments and helps standardise visual results across multiple observations, supporting reliable comparisons in teaching and routine quality checks. Seamless integration into stereomicroscope workflows Designed for use with stereomicroscopes, the low-profile platform keeps the specimen close to the objective while preserving working distance and manoeuvrability. The stage's simple mounting and the readily removable plate allow quick adaptation between tasks, which is particularly useful in educational settings and busy workshops where different samples are inspected in sequence. Compatibility with the EduBlue documentation references (AP-1 and AP-2) ensures that the EduBlue series remains consistent across accessories and replacement parts, simplifying inventory and tool management. Practical handling and durable everyday use The stage is intended as a practical solution for repetitive inspection tasks: the removable plate simplifies cleaning and sample exchange, while the compact footprint keeps bench space free for other instruments. As part of the EduBlue family from Euromex, this accessory supports standard classroom and workshop procedures without adding unnecessary complexity. The straightforward design makes it easy to train staff and students on consistent sample presentation, improving throughput and reducing handling errors in routine microscopy work. Contact Metav Werkzeuge today for tailored advice on the Euromex EduBlue ED.9956 microscope stage and its compatibility with existing stereomicroscope setups; call +49 2822 7131930 or email info@metav-werkzeuge.com for information on availability and delivery from Emmerich Technical Data Article number: ED.9956 Manufacturer: Euromex Model series: EduBlue Product type: Microscope stage SKU: ED.9956 Facts Stage plate diameter: Ø 60 mm Special features Black/white stage plate Ø 60 mm (AP-1 and AP-2) Removable stage plate For stereomicroscopes Part of EduBlue series FAQ Is the stage compatible with stereomicroscopes? The stage is designed for use with stereomicroscopes; the EduBlue ED.9956 platform and its black/white stage plate Ø 60 mm suit typical stereo inspection tasks. Can the black/white plate be removed for cleaning? Yes, the black/white stage plate is removable, allowing easy cleaning and quick swapping between backgrounds for consistent contrast. What benefit does the Ø 60 mm plate offer? A Ø 60 mm plate provides a compact working area that supports small specimens while enabling rapid background changes to enhance visibility and documentation. Where is the product series mentioned in documentation? The EduBlue series references the black/white stage plate as AP-1 and AP-2 in the relevant EduBlue documentation; the ED.9956 is listed under that accessory group. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkezeuge.com
60mm Microscope Objective 60x 0.2 mm Working Distance NA 0.75 - Euromex
Take advantage of the 60x magnification combined with a numerical aperture of 0.75 and a minimal working distance of 0.2 mm for exceptionally detailed inspection tasks; order the objective directly via Metav Werkzeuge or consult the team for integration advice. Microscope objective AE.5599 — 60x magnification, NA 0.75 (Euromex) Microscope objective AE.5599 for high‑magnification, laboratory and teaching applications, delivering close‑range imaging with a 0.2 mm working distance. 60× magnification for detailed imaging High numerical aperture 0.75 for resolution Short working distance 0.2 mm for close focus Suitable for research and education microscopes Superior resolution for demanding inspections With 60x magnification and a numerical aperture of 0.75, this objective delivers a significant improvement in resolving power compared with lower‑NA optics. The higher aperture increases the amount of light collected from the specimen, which directly enhances contrast and detail in transmitted‑light and reflective imaging. For applications such as material inspection, fine biological structures or quality control under a laboratory microscope, the combination of magnification and aperture provides clear, measurable benefits: finer defect detection, more reliable feature measurement and improved image clarity for documentation and analysis. Optimised for close‑range analysis and careful sample handling The working distance of 0.2 mm enables very close approach to the specimen plane, which is an advantage when examining surface details or thin sections where proximity improves apparent resolution. This short distance requires deliberate sample preparation and cautious focusing—ideal for controlled laboratory environments rather than field use. The optical design prioritises close‑range imaging and precision alignment, so users can expect stable imaging of fine structures when mounted on compatible microscope stands commonly used in research and education. Proven manufacturer quality and practical integration Manufactured by Euromex, the AE.5599 objective (SKU AE.5599) is specified according to product documentation and is intended for users who need reliable, high‑magnification optics. The objective’s specifications are straightforward and allow engineers and laboratory managers to plan instrument setups with confidence. For procurement or technical questions, Metav Werkzeuge supports customers from its Emmerich site, offering stock logistics and application advice that help integrate precision optics into existing workflows without unnecessary complexity. Contact Metav Werkzeuge for detailed compatibility guidance and to source the AE.5599 objective directly from Emmerich, where expertise and reliable supply ensure a smooth addition to the optical toolkit Technical data Article number: AE.5599 SKU: AE.5599 Product type: Microscope objective Facts Magnification: 60x Working distance: 0.2 mm Numerical aperture: 0.75 Special features Manufacturer: Euromex Label: Microscope objective AE.5599 Category: For microscopes Source: Education PDF S.13 (S60x/0.75 SMP objective) FAQ What level of detail can be expected with this objective? The AE.5599 objective, with its 60x magnification and NA 0.75, is designed to resolve fine surface and structural details, making it suitable for tasks that require high‑resolution observation. Is the short working distance problematic for routine use? A working distance of 0.2 mm requires careful sample handling and precise focusing; when used on stable laboratory stands the AE.5599 performs reliably for close‑range inspections. Can this objective be used in both education and research labs? Yes. The optical characteristics of the AE.5599 make it appropriate for advanced teaching and research environments where high magnification and resolution are required. Does the numerical aperture affect lighting requirements? Higher numerical aperture (0.75) improves light collection but may demand controlled illumination and appropriate condenser settings to realise the full resolution potential of the AE.5599. How is technical support and supply handled for this objective? Metav Werkzeuge provides procurement and logistical support from Emmerich and can advise on compatibility and integration of the AE.5599 objective into existing microscope setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Pair of Black and White Stage Plates, Ø 60 mm - Euromex
Benefit from a compact Ø 60 mm format and contrasting black/white surfaces that simplify specimen presentation; combine these features for reliable visual assessment in routine microscopy workflows and order the set directly via Metav Werkzeuge or consult the company's specialists for technical guidance. Pair of Stage Plates Ø 60 mm SB.9956 — Black/white plates for stereomicroscopes by Euromex Pair of Stage Plates Ø 60 mm SB.9956 offers contrasting stage inserts to improve sample visibility under stereo inspection, optimised for small specimens and routine laboratory workflows Pair of black and white plates Diameter 60 mm For stereomicroscopes Better contrast for faster visual assessment The set provides a clear visual distinction between dark and light backgrounds, enhancing the detection of edges, contours and small details. The contrasting black and white surfaces reduce preparation time by making specimens stand out immediately against the stage. For technicians who perform repetitive visual inspections, this contrast translates into more consistent observations and fewer repositions of samples. The design supports quick switching between backgrounds without the need for additional accessories, helping to maintain a smooth workflow in busy labs. Compact format that suits small specimens and tight setups With a precise Ø 60 mm diameter, these stage inserts are compact enough for confined stage areas yet large enough for many common sample types used in stereo observation. The small footprint makes the plates suitable where stage space is at a premium or when multiple accessories share the microscope stage. The modest size also simplifies alignment and centring of specimens, which contributes to faster set-up times and reduced handling — particularly useful in quality-control benches and educational workstations. Ready compatibility with stereomicroscopy workflows Designed for use with stereomicroscopes, the pair of inserts supports routine inspection tasks where illumination and perspective differ from compound microscopy. The contrasting backgrounds assist in both top-light and side-light arrangements by improving perceived depth and outline clarity. This set is particularly helpful when working with irregularly shaped or reflective samples, since the two-colour option enables selection of the background that offers the best visual separation for the material being inspected. Request technical advice or place an order through Metav Werkzeuge to ensure seamless integration of these Euromex stage plates into the existing microscopy setup — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SB.9956 SKU: SB.9956 Manufacturer: Euromex Product type: Microscope stage Label: Paar Objekttisch-Platten (schwarz/weiß) Ø 60 mm SB.9956 Dimensions / Measurables Diameter: 60 mm Design & Compatibility Pair of black and white plates For stereomicroscopes Contrast-enhancing stage inserts FAQ What is the exact diameter of these stage plates? The Euromex pair of stage plates SB.9956 has a diameter of 60 mm. Are these inserts suitable for stereomicroscopes? Yes, the SB.9956 stage plates are designed for use with stereomicroscopes and support common reflected-light inspection setups. How do the black and white plates improve observation? The contrasting black and white surfaces in the Euromex SB.9956 set enhance edge detection and improve sample visibility, reducing handling and speeding up routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Plan Stress-Free PLPOLi 60x/0.85 IOS Transmission Polarisation Objective 0.14 mm Working Distance, 0.17 mm Cover Glass Corrected - Euromex
Take advantage of the combination of precise polarisation contrast, 60× magnification and a very short working distance for detailed transmitted-light inspection; order or request guidance via Metav Werkzeuge for seamless integration into quality-control workflows. Plan strain-free PLPOLi 60×/0.85 IOS microscope objective — Euromex IS.7960-T (transmitted light polarisation, 0.14 mm working distance) Plan strain-free PLPOLi 60×/0.85 IOS objective for iScope transmitted light polarisation, corrected for 0.17 mm cover glass (IS.7960-T) delivers high-contrast polarisation imaging for demanding laboratory and industrial inspections. 60× magnification for fine detail Plan, strain-free optical design Polarisation contrast for transmitted light Corrected for 0.17 mm cover glass Exceptional contrast for polarisation inspection The PLPOLi 60× objective is engineered to provide high polarisation contrast in transmitted-light applications, enabling clear visualisation of birefringent structures and internal stresses. Its plan, strain-free construction reduces optical artefacts that can obscure delicate features, so technicians and researchers can rely on images that reflect true sample properties rather than lens-induced distortions. This makes the optic particularly suitable for materials analysis and metallurgical sections where accurate stress visualisation is critical. Compact working distance with accurate focus control With a 0.14 mm working distance and a numerical aperture of 0.85, the objective balances resolution and depth of field to reveal microstructural detail while maintaining manageable focusing requirements. The short working distance supports high-resolution imaging at 60× magnification, permitting inspection of fine features on thin specimens. For users less familiar with optical parameters, the higher numerical aperture translates directly into improved resolution and light-gathering ability for clearer images under polarised transmitted light. Reliable correction for standard cover glass thickness This optic is corrected for a 0.17 mm cover glass, ensuring that common slide preparations remain in sharp focus and free from spherical aberration. The correction reduces the need for repeated re-focusing when switching between specimens prepared to standard thickness, which streamlines workflow in busy labs and production environments. Compatibility with the iScope IOS mounting system provides straightforward mechanical integration and repeatable positioning during routine inspections. Durable design and application fit for industry use Built by Euromex to professional standards, the objective combines precision engineering with materials and coatings chosen for optical stability in polarisation work. Its specification is tailored for transmitted-light microscopy tasks such as metallography, polymer evaluation and stress analysis. The compact optical package supports microscope inspection stations where space on the condenser axis is limited while maintaining reliable optical performance throughout repeated use. For professional polarisation imaging with Euromex optics, contact Metav Werkzeuge for expert advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.7960-T SKU: IS.7960-T Manufacturer: Euromex Product type: microscope objective Label: Plan spannungsfreies PLPOLi 60x/0,85 IOS Objektiv für iScope Durchlicht Polarisation, Arbeitsabstand 0,14 mm und 0,17mm Deckglas korrigiert IS.7960-T Core specifications Magnification: 60× Numerical aperture: 0.85 Working distance: 0.14 mm Cover glass correction: 0.17 mm Imaging mode: transmitted light polarisation Special features Plan, strain-free PLPOLi design IOS compatibility for iScope transmitted-light systems Corrected optics for standard 0.17 mm cover glass Suitable for polarisation contrast and stress analysis Gallery image available FAQ What magnification and numerical aperture does this objective offer? The Euromex PLPOLi 60×/0.85 microscope objective provides 60× magnification with a numerical aperture of 0.85, offering high resolution for transmitted-light polarisation inspections. Is the objective suitable for standard slide preparations with a cover glass? Yes. The objective is optically corrected for a 0.17 mm cover glass, ensuring reduced spherical aberration and consistent focus with standard specimen preparation. Can this objective be used for stress or birefringence analysis? Absolutely. The plan, strain-free optics and polarisation design of the IS.7960-T support clear visualisation of birefringent structures and internal stresses in materials. Which microscope systems is the objective compatible with? The objective is designed for IOS mounting on iScope transmitted-light systems, providing mechanical compatibility and repeatable alignment for routine inspections. How does the short working distance affect handling and sample preparation? The 0.14 mm working distance enables high-resolution imaging but requires careful sample thickness and positioning; it is ideal for thin specimens where fine structural detail must be resolved. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Stage Plate Frosted Glass Opaque, Ø60mm - Euromex
Take advantage of a frosted glass surface combined with a compact Ø 60 mm diameter and straightforward compatibility for efficient sample handling and reliable visual contrast. Order the EduBlue ED.9950 stage plate directly via Metav Werkzeuge or contact our consultants for tailored advice. EduBlue ED.9950 microscope stage plate — frosted glass, Ø 60 mm, for stereomicroscopes (Euromex) EduBlue ED.9950 is a compact stage plate designed to improve specimen visibility and handling under stereomicroscopes in educational and light‑duty laboratory settings Frosted glass, opaque surface Ø 60 mm diameter Designed for stereomicroscopes Enhanced visibility through diffused illumination A frosted glass surface scatters incident light to reduce specular reflections and produce a more uniform background, which increases perceived contrast for small or translucent specimens. This translucent, opaque finish helps avoid distracting hotspots when using incident illumination or oblique lighting techniques common with stereomicroscopes, so users can focus on structural detail rather than glare. For teaching environments and routine inspections, the result is a more consistent image that supports rapid assessments and clearer demonstrations. Compact form factor that fits routine workflows The Ø 60 mm diameter makes the stage plate particularly suitable for small parts, slides and micro‑assemblies, optimising the usable workspace on standard stereomicroscope platforms. The modest footprint aids precise positioning of components and simplifies stage movements without obstructing the operator’s field of view. As a single‑element replacement or accessory, the plate integrates with existing stage clips or holders and supports straightforward exchange, contributing to minimal downtime during instrument preparation. Practical handling and maintenance advantages A glass stage plate is simple to clean and maintains stable optical properties over time, supporting reproducible results in repeated observations. The EduBlue ED.9950 stage plate requires only routine wiping to remove residues, and its surface resists rapid wear typical of softer materials. For classroom settings and light industrial use, this translates into lower maintenance overhead and dependable performance across multiple sessions, preserving image quality and reducing interruptions to teaching or inspection tasks. Contact Metav Werkzeuge today to discuss compatibility details or to arrange supply of the EduBlue ED.9950 stage plate; Metav’s consultants can advise on integration with specific stereomicroscope models and delivery options from Emmerich. Technical Data Article number: ED.9950 SKU: ED.9950 Brand: Euromex Model series: EduBlue Product type: Microscope stage plate Key measurements Diameter: 60 mm Surface: Frosted glass, opaque Compatibility and application For stereomicroscopes Intended for small specimens and educational use Easy to clean surface FAQ What lighting benefits does a frosted stage plate offer? A frosted glass plate diffuses light to reduce glare and hotspots; the EduBlue ED.9950 stage plate improves background uniformity and perceived contrast when inspecting specimens under a stereomicroscope. Will this stage plate fit any stereomicroscope stage? The EduBlue ED.9950 is sized at Ø 60 mm for compact applications and is designed for standard stereomicroscope setups; verify stage clip or holder dimensions before installation for secure mounting. How should the stage plate be maintained? Clean the frosted glass surface with a lint‑free cloth and suitable, non‑abrasive cleaner; routine wiping preserves the optical texture and prolongs consistent imaging with the EduBlue ED.9950. Is the plate suitable for both incident and transmitted illumination? Yes; the opaque, frosted finish is primarily beneficial for incident lighting scenarios common with stereomicroscopes, enhancing contrast for reflective and translucent specimens. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Transparent Plexiglass Stage Plate, Ø 60 mm - Euromex
Take advantage of a compact, transparent work surface that combines clarity and robustness for precise specimen inspection; the Ø 60 mm plexiglass design fits small stereomicroscope setups and is straightforward to maintain. Order or request advice via Metav Werkzeuge for fast supply and technical guidance. Transparent Plexiglass Stage Ø 60 mm — Euromex SB.9952 The Transparent Plexiglass Stage Ø 60 mm SB.9952 that serves as a compact, clear tabletop for stereomicroscopes, enabling dependable sample support in laboratory, educational and workshop environments Transparent plexiglass for clear sample view Diameter Ø 60 mm for compact installations Compatible with stereomicroscopes Easy to clean, lightweight and durable Clear visual access for precise inspection The transparent construction delivers unobstructed sightlines to small specimens, making fine adjustment and observation simpler under a stereomicroscope. As a lightweight plexiglass disc, the stage minimises reflections and provides a neutral background that assists in contrast management when inspecting delicate parts or biological samples. The compact format is particularly suited to benches with limited space, where a small, reliable viewing area supports repeatable positioning and efficient workflow. Robust material choice for everyday use Crafted from acrylic, the tabletop combines impact resistance with consistent optical clarity, reducing breakage risk compared with thin glass alternatives. The Ø 60 mm diameter offers a stable platform for small mounts and Petri dishes while remaining simple to handle and replace if required. This functional design supports frequent use in teaching labs and routine quality checks, where endurance and predictable behaviour under lighting are key factors in maintaining measurement and inspection routines. Low-maintenance handling and safe cleaning The smooth surface of the acrylic stage allows straightforward maintenance: routine cleaning removes dust and residues without specialised agents. Its easy to clean nature helps preserve optical quality and reduces downtime between sessions. The lightweight construction facilitates rapid exchange for different optical setups and minimises strain during repeated adjustments, contributing to a more efficient inspection cycle in multi-shift or classroom environments. Versatile fit for microscopes and workflows Designed specifically for use with stereomicroscopes, the disc is compatible with a range of stands and illumination arrangements commonly used in workshops and laboratories. The modest footprint makes it a practical choice for experimental rigs, educational benches and component inspection stations that require a compact clear stage. The combination of clarity, durable material and simple geometry supports consistent visual results and easier integration into existing setups. For product advice and reliable supply of the Euromex Transparent Plexiglass Stage (SB.9952), contact Metav Werkzeuge in Emmerich for tailored recommendations and prompt delivery at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: SB.9952 SKU: SB.9952 Brand: Euromex Product type: Microscope stage Material: Transparent Plexiglas (acrylic) Dimensions / Measurable data Diameter: Ø 60 mm Features / Applications Intended for: stereomicroscopes Form: round transparent tabletop Suitable environments: laboratory, education, workshop FAQ Is this stage suitable for all stereomicroscopes? The Transparent Plexiglass Stage Ø 60 mm SB.9952 by Euromex is intended for use with stereomicroscopes that accommodate a compact round stage; compatibility depends on the instrument's stage mount and working distance. How should the plexiglass tabletop be cleaned? Clean the Euromex tabletop with a soft cloth and mild detergent; the acrylic material resists everyday contaminants and is designed for simple maintenance without abrasive cleaners. Can this stage be used with transmitted illumination? The transparent nature of the SB.9952 allows light to pass through for many transmitted illumination setups, subject to the specific lighting configuration of the stereomicroscope. Is the material scratch-resistant? The stage is made from durable acrylic, which offers improved impact resistance compared with thin glass; however, like all polymer surfaces it can be scratched and should be handled with care. What is the primary application for this tabletop? The Euromex SB.9952 is primarily intended as a compact, clear support for specimen observation on stereomicroscopes in educational, laboratory and light workshop settings. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60x Infinity-Corrected Objective 0.46mm Working Distance 0.80 NA - Euromex
Take advantage of a combination of 60x magnification, a numerical aperture of 0.80 and a short working distance for high-detail imaging of near-surface specimens; order the Euromex bScope BS.8460 directly via Metav Werkzeuge or ask our consultants if needed bScope BS.8460 microscope objective — 60x magnification, NA 0.80 (Euromex) The bScope BS.8460 is a 60x microscope objective designed for high-resolution observation in education and life-science applications, offering a compact working distance for close-focus specimen inspection 60x magnification for fine structural detail Numerical aperture 0.80 for superior resolution Working distance 0.46 mm for close-up samples High resolving power for detailed sample analysis The objective delivers 60x magnification combined with a numerical aperture of 0.80, which results in improved light-gathering capability and enhanced resolving power compared with lower-NA lenses. In practical terms, a higher NA enables sharper contrast and finer distinction between closely spaced structures in biological specimens or thin material sections; this translates into fewer retakes and clearer documentation. The optical correction is designed to support modern microscope configurations that require consistent image quality across the field. Close working distance optimised for surface and cell-layer observation A working distance of 0.46 mm positions the front element close to the specimen plane, which benefits applications where high magnification of surface detail or superficial cell layers is required. The reduced gap improves numerical-aperture utilisation but requires careful sample mounting and focusing technique; in routine lab work this often means using low-profile coverslips and stable stage control. The short working distance is especially useful for life-science teaching labs and research benches where detailed, high-contrast views of thin preparations are needed. Compatibility with infinity-corrected optical systems and practical use This lens is specified as an infinity-corrected IOS PLi objective, making it suitable for integration into modern microscope stands that accept infinity optics. Compatibility with such systems allows straightforward adoption into existing setups without the need for major system redesign, while preserving parfocality and tube-lens requirements. The construction supports repeated classroom use and practical laboratory workflows, aiding reliable imaging across sessions. As a product from Euromex, the optical performance is aimed at balancing robustness with classroom and bench-level precision Contact Metav Werkzeuge today to discuss system compatibility, request detailed documentation or to place an order for the Euromex bScope BS.8460 through our technical sales team at Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS.8460 SKU: BS.8460 Manufacturer: Euromex Model series: bScope Product type: microscope objective Core specifications Magnification: 60x Working distance: 0.46 mm Numerical aperture: 0.80 Optical type: infinity-corrected IOS PLi Features & applications Referenced in Education and Life Science documentation Suited to education and life-science imaging scenarios Close working distance for high-detail surface observation FAQ What magnification and resolution can be expected with this objective? The Euromex bScope BS.8460 microscope objective (SKU BS.8460) provides 60x magnification with a numerical aperture of 0.80, enabling high-resolution imaging suitable for fine structural observation in life-science and teaching contexts. Is the objective compatible with infinity-corrected microscope systems? Yes, the lens is specified as an infinity-corrected IOS PLi objective and is designed for integration into microscopes that accept infinity optics. How close can the objective approach the specimen and what does that mean for handling? The working distance is 0.46 mm, which requires careful sample mounting and stage control; the short distance benefits surface detail imaging but necessitates cautious focus adjustments. Can this objective be used in both education and research laboratories? The optical specification and documented references in education and life-science materials make this objective appropriate for teaching labs and routine research tasks where high-detail visualisation is needed. Does the product require specific tube lenses or adapters? Integration into an infinity-corrected system typically requires a compatible tube lens as specified by the microscope manufacturer; check system compatibility before installation. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60x MicroBlue Microscope Objective 0.85 NA - Euromex
Compact high-magnification performance meets clear optical specification: the combination of 60x magnification and a numerical aperture of 0.85 delivers improved resolving power for demanding visual inspection. Order the MicroBlue MB.7060 directly via Metav Werkzeuge or consult our specialists for application guidance and matching accessories. MicroBlue MB.7060 — 60x Microscope Objective, NA 0.85 (Euromex) MicroBlue MB.7060 is a 60x microscope objective engineered for precise, high-magnification observation in laboratory and educational settings. 60x magnification Numerical aperture 0.85 for fine detail Designed for laboratory microscopes Enhanced resolution for fine structural detail The combination of 60x magnification and a numerical aperture of 0.85 increases the objective’s ability to distinguish closely spaced features, which is essential for detailed inspection tasks. The numerical aperture (NA) describes the light-gathering capacity and angular acceptance of the lens; a higher NA improves resolution and contrast, especially under transmitted illumination. Users unfamiliar with optical metrics will notice finer detail and clearer edge definition in samples where standard objectives show limited structure. Practical optics for routine and specialised observation Built as an S60x/0.85 type objective, the lens is suited to high-magnification workflows where visual clarity and repeatability matter. The construction supports stable imaging and consistent field flatness typical of dedicated high-NA objectives, enabling repeatable results across multiple sessions. For workflows in teaching labs, quality control benches or research setups, the lens delivers the optical precision required without complex reconfiguration, simplifying integration into existing microscope stands and routines. Proven manufacturing and dependable supply chain Produced by Euromex, the MicroBlue MB.7060 reflects established optical manufacturing standards and quality control practices that favour consistent performance. The clearly stated specification—60x, NA 0.85—provides an objective basis for instrument selection and comparison, allowing purchasing decisions to be made on measurable parameters rather than marketing claims. Where supply reliability and documentation are decisive, the product is available through Metav Werkzeuge, whose regional logistics and inventory management act as a practical quality filter for European workshops and laboratories. For secure procurement and application advice on the Euromex MicroBlue MB.7060, contact Metav Werkzeuge to discuss integration, documentation and availability near your workshop. Technical Data Article number: MB.7060 SKU: MB.7060 Manufacturer: Euromex Product type: Microscope objective Model series: MicroBlue Label: Mikroskopobjektiv MicroBlue MB.7060 Data Magnification: 60x Numerical aperture: 0.85 Special features S60x/0.85 objective Category: for microscopes FAQ What magnification and numerical aperture does the objective offer? The MicroBlue MB.7060 provides 60x magnification combined with a numerical aperture of 0.85, supporting enhanced resolution and contrast. How does the numerical aperture affect image quality? A higher numerical aperture, such as NA 0.85 in this objective, increases light-gathering ability and angular resolution, improving the ability to resolve fine structures and enhancing contrast in high-magnification observation. Is this objective suitable for educational laboratories? Yes, the MicroBlue MB.7060 is specified in educational documentation and is suitable for advanced teaching environments where higher magnification and clear visualisation of microstructures are required. What specification should be checked when comparing similar objectives? Compare magnification, numerical aperture, and the stated objective type (for example S60x/0.85) to ensure the lens meets the needed resolution and light-gathering requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60x Objective 0.80 NA 1.5 mm Working Distance, S60x/0.80 PLi - Euromex
Take advantage of the combination of 60x magnification, a high numerical aperture (0.80) and a compact 1.5 mm working distance for sharper detail and reliable imaging in demanding inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Microscope objective Achios‑X Observer AX.7260 — high‑resolution 60x objective with 0.80 NA The Microscope objective Achios‑X Observer AX.7260 is an engineered optical lens for laboratory and industrial microscopes, designed to deliver detailed imaging at high magnification for inspection, research and quality control applications. High 60x magnification Numerical aperture 0.80 Working distance 1.5 mm Achios‑X Observer compatibility Delivering the resolution required for critical inspection The combination of 60x magnification and a numerical aperture of 0.80 provides noticeably higher resolving power compared with lower‑aperture optics; this means finer structural details can be distinguished and captured. The numerical aperture governs the objective’s light‑gathering ability and directly affects image contrast and resolution — a larger value improves capability at high magnifications. For operators evaluating microstructures, circuit features or biological samples, this optical specification translates into crisper edge definition and better visual differentiation between closely spaced elements. The result is a measurable improvement in inspection confidence and fewer repeat analyses. Optimised for short‑distance inspection tasks With a working distance of 1.5 mm, this objective is purpose‑built for applications that require close proximity to the specimen, such as high‑precision surface inspection or thin‑section microscopy. A shorter working distance reduces the optical path and improves stability for very high magnification imaging, but it also requires careful sample placement and compatible stage hardware. The compact clearance is ideal where space at the sample plane is limited and where objective immersion or cover‑slip considerations are managed. Compatibility with standard observer stands ensures straightforward mechanical integration into existing setups. Optical build and series compatibility for consistent results Specified as an S60x/0.80 PLi type within the Achios‑X Observer series, this objective is manufactured for consistent optical performance across matched sets. The designation indicates the design intent and alignment with Euromex’s observer line, facilitating predictable imaging characteristics when paired with matching condenser and ocular assemblies. For procurement and inventory, using series‑matched optics minimises aberrations and simplifies calibration routines, delivering more repeatable measurements and fewer alignment interventions during routine use. Practical integration and support for laboratory workflows Beyond raw optical data, the objective supports efficient laboratory operation when combined with proper illumination and camera systems: the high numerical aperture benefits digital capture by increasing signal for shorter exposure times and improved signal‑to‑noise ratios. Technical documentation (referenced in the Life Science PDF) lists the core specifications and helps ensure correct optical matching. For teams establishing new measurement protocols or retrofitting inspection stations, the clear technical parameters allow planners to assess system throughput, expected image quality and required handling procedures before purchase, reducing integration risk and downtime. Contact Metav Werkzeuge for a tailored specification check, compatibility guidance and access to the technical PDF for the Euromex Achios‑X Observer AX.7260; our consultants in Emmerich will help determine the best configuration for each inspection task Technical data Article number: AX.7260 SKU: AX.7260 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Microscope objective Label: Mikroskopobjektiv Achios-X Observer AX.7260 Facts Magnification: 60x Numerical aperture: 0.80 Working distance: 1.5 mm Special features Objective designation: S60x/0.80 PLi Application area: For microscopes (microscopy accessory) Source reference: Life Science PDF (pages 21, 46) FAQ What level of detail can be expected with this objective? The Euromex Achios‑X Observer AX.7260 achieves high detail through its 60x magnification and 0.80 numerical aperture, enabling improved resolution for small features and structural contrasts. Is this objective compatible with standard observer microscope stands? Yes, the AX.7260 is part of the Achios‑X Observer series and is specified for integration with observer stands and matching optical components to ensure mechanical and optical compatibility. How does the short working distance affect sample handling? A 1.5 mm working distance offers enhanced optical performance at close range but requires precise sample placement and appropriate stage control to avoid contact with the lens. Where can the official technical specifications be found? Detailed specifications, including the S60x/0.80 PLi designation, are listed in the Life Science PDF referenced for the product and can be supplied by Metav Werkzeuge on request. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
675mm MacroZoom Digital Microscope 8.3MP 3840x2160 18:1 Optical Zoom Autofocus, HDMI/USB/WiFi - Euromex
Benefit from high‑resolution 8.3 MP imaging and an 18:1 optical zoom for versatile inspection and documentation; compact dimensions and integrated HDMI/USB/WiFi connectivity support efficient production routines. Order the MacroZoom MZ.4702 directly via Metav Werkzeuge or ask our consultants if needed. MacroZoom MZ.4702 — Digital microscope with 8.3 MP sensor and 18:1 optical zoom (Euromex) The MacroZoom MZ.4702 is a digital microscope designed for large‑area inspection and fine‑detail analysis in quality control, assembly checks and research environments 8.3 MP Sony CMOS sensor clarity 18:1 optical zoom for wide magnification range HDMI, USB and WiFi connectivity Autofocus with up to 60 fps capture High‑resolution imaging for reliable defect detection The MacroZoom series combines a Sony CMOS 1/2.8 inch sensor with an effective 8.3 MP output (3840 x 2160 pixels), delivering sharp stills and video for traceable documentation. Higher pixel counts increase the level of visible detail on-screen, which reduces rework by making small defects immediately visible. The supplied ImageFocus Alpha software enables image capture, measurements and annotation for quality reports; this simplifies traceability and shortens the time from inspection to decision. External illumination is recommended to achieve the best contrast and repeatable results. Flexible zoom and working distance for varied tasks An 18:1 optical zoom provides a continuous optical magnification range without the loss of detail associated with digital enlargement, so both overview shots and close inspections remain crisp. With a working distance of 400–670 mm, the system adapts to larger assemblies as well as fine components; on a 24‑inch screen at 600 mm working distance the effective display magnification ranges from 0.8× to 14.5×, with a field of view from 65 × 37 cm down to 3.6 × 2 cm. This combination reduces the need for multiple inspection tools and speeds up setup when switching between tasks. Seamless connectivity and fast capture save time Integrated HDMI, USB and WiFi interfaces allow direct connection to monitors, PCs and local networks for live inspection, recording and remote review. Capture rates of up to 60 fps support smooth live imaging for dynamic inspection tasks and quick alignment. The system is delivered with practical accessories — mouse, WiFi dongle, HDMI cable, power supply and tripod — to enable rapid commissioning. Autofocus reduces operator setup time and helps maintain consistent image quality across multiple operators and shifts. Robust design and intuitive operation for everyday use At 4.6 kg and a compact footprint (675 mm height; base plate 380 mm wide; overall width 560 mm; depth 260 mm), the unit is stable yet transportable within the workshop. The autofocus and software‑assisted controls lower the learning curve, enabling technicians with limited optical experience to produce repeatable results. The optical construction and industrial sensor ensure reliable performance under routine use, supporting continuous inspection cycles without frequent recalibration. Recommended external lighting allows adaptation to different surface finishes and reflective materials. Contact Metav Werkzeuge for tailored advice on integrating the MacroZoom MZ.4702 into inspection workflows and for assistance selecting accessories; Metav Werkzeuge advises from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MZ.4702 Manufacturer: Euromex SKU: MZ.4702 Facts Sensor: Sony CMOS 1/2.8 inch Resolution: 8.3 MP (3840 x 2160) Frame rate: max. 60 fps Working distance: 400–670 mm Weight: 4.6 kg Dimensions: 675 mm high; base plate 380 mm wide; overall width 560 mm; depth 260 mm Special features Optical zoom 18:1 Autofocus Connectivity: HDMI, USB, WiFi Software: ImageFocus Alpha Scope of delivery: mouse; WiFi dongle; HDMI cable; power supply; tripod Recommended external lighting FAQ What level of detail can be expected from the camera sensor? The MacroZoom MZ.4702 uses a Sony CMOS sensor producing 8.3 MP (3840 x 2160) images, which provides high detail suitable for identifying small defects and producing documentation for quality control. Is the magnification optical or digital, and why does it matter? The system offers an 18:1 optical zoom, which preserves image quality across the magnification range; this means close‑up inspections remain sharp without artefacts that often occur with digital enlargement. Can the microscope be connected to a monitor or network for live review? Yes, the MacroZoom MZ.4702 supports HDMI, USB and WiFi connections for direct monitor output, PC capture and networked inspection workflows, enabling live review and remote collaboration. What accessories are included to get started quickly? Delivery includes a mouse, WiFi dongle, HDMI cable, power supply and a tripod to enable rapid commissioning of the MacroZoom MZ.4702 in laboratory or workshop environments. Is external lighting required for all applications? External lighting is recommended to achieve optimal contrast and repeatable results, particularly on reflective or textured surfaces; the MacroZoom MZ.4702 performs best when combined with controlled illumination. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
675mm MacroZoom Digital Microscope 8.3MP 3840x2160 18:1 Optical Zoom Autofocus, HDMI/USB/WiFi - Euromex
Benefit from precise imaging with an 8.3 MP Sony CMOS sensor and an 18:1 optical zoom for versatile magnification; combined with Autofocus and HDMI/USB/WiFi connectivity, this system accelerates inspection and documentation. Order the MacroZoom MZ.4702-HDS directly via Metav Werkzeuge or ask our consultants for tailored advice. MacroZoom MZ.4702-HDS — Digital microscope with 8.3 MP and 18:1 optical zoom (Euromex) The MacroZoom MZ.4702-HDS is a digital microscope for macro inspection and quality control, offering a wide working distance range and integrated imaging for production and laboratory environments 8.3 MP sensor with 3840 x 2160 resolution 18:1 optical zoom for versatile magnification Autofocus with up to 60 fps live view HDMI, USB and WiFi connectivity included High-resolution imaging for reliable inspection The system delivers a combination of high pixel resolution and optical magnification that supports traceable visual inspection and clear documentation. With a Sony CMOS 1/2.8 inch sensor and 8.3 MP capture capability producing 3840 x 2160 pixels, fine surface details become identifiable without extensive post-processing. The 18:1 optical zoom preserves image quality across the zoom range, enabling both overview and close-up captures with minimal distortion. These characteristics reduce rework and speed up decision-making in incoming inspection and R&D tasks by providing reproducible images for records. Flexible working distance and smooth live observation Designed for larger components and assemblies, the instrument maintains a practical working distance of 400–670 mm, allowing inspection without obstructing tooling or fixtures. The integrated Autofocus keeps the subject sharp while panning or zooming, and the live feed supports up to 60 fps, providing fluid motion for real-time analysis. In reference conditions a 24-inch screen at a 600 mm working distance produces a magnification range of 0.8–14.5x, with a field of view from 65 x 37 cm down to 3.6 x 2 cm — a combination that suits both component alignment and defect localisation without changing optics. Seamless connectivity and simplified documentation workflow The unit supports modern connectivity standards — HDMI, USB and WiFi — which enable direct connection to displays, PC capture stations and wireless file transfer. Supplied accessories include a WiFi dongle, HDMI cable and an 11-inch HD screen to view results immediately on the shop floor. Image management is handled via ImageFocus Alpha software for capture, measurement and export, which streamlines traceability and integrates well with existing inspection routines. External lighting is recommended for optimised contrast and reproducible imaging in reflective or textured materials. Robust, portable design for workshop integration At approximately 4.6 kg and with compact footprints (675 mm height; base plate 380 mm; overall width 560 mm; depth 260 mm), the system combines stability with portability for flexible deployment across workstations. The supplied stand, power supply and mouse enable a rapid set-up, while the durable construction suits repeated use in production and service environments. The included instrument package supports fast commissioning and reduces the number of add-on accessories required to begin inspections. For reliable macro inspection with Euromex optical quality, contact Metav Werkzeuge in Emmerich to discuss procurement, integration and technical suitability for specific applications — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MZ.4702-HDS Brand: Euromex SKU: MZ.4702-HDS Facts Camera resolution: 8.3 MP Pixel resolution: 3840 x 2160 Frame rate: max. 60 fps Working distance: 400–670 mm Weight: 4.6 kg Dimensions: 675 mm high; base plate 380 mm wide; overall width 560 mm; depth 260 mm Special features Sensor: Sony CMOS 1/2.8 inch Optical zoom: 18:1 Connections: HDMI; USB; WiFi Focusing: Autofocus Software: ImageFocus Alpha Included accessories: Mouse; WiFi dongle; HDMI cable; Power supply; 11-inch HD screen; Stand Additional info: On 24-inch screen at 600 mm working distance: 0.8–14.5x; FOV 65 x 37 cm to 3.6 x 2 cm; External lighting recommended FAQ What is the usable working distance for inspections? The usable working distance is 400–670 mm, which provides space for tooling and fixtures while keeping components within the optimal focus range of the MacroZoom MZ.4702-HDS. Which magnification and field of view can be expected in practice? Under reference conditions a 24-inch display at 600 mm gives approximately 0.8–14.5x magnification with a field of view ranging from 65 x 37 cm to 3.6 x 2 cm, suitable for both overview and fine-detail work with the MacroZoom MZ.4702-HDS. Is the system suitable for live inspection of moving parts? Yes, the system supports live observation up to 60 fps and includes Autofocus, which helps to maintain clarity during movement and reduces the need for repeated captures. How can images from the system be saved and shared? Images can be captured and managed via the ImageFocus Alpha software; physical connections include HDMI and USB, while WiFi enables wireless transfer when using the supplied dongle. What accessories are supplied for immediate use? The delivery contains a mouse, WiFi dongle, HDMI cable, power supply, an 11-inch HD screen and a stand, allowing start-up without additional peripherals. Is additional lighting required for best results? External lighting is recommended to achieve consistent contrast and repeatable results, particularly on reflective or textured surfaces when using the MacroZoom MZ.4702-HDS. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7.5mm 2x Delphi-X Observer Microscope Objective 0.06 NA, WD 7.5mm - Euromex
Product data inconsistency: the specified manufacturer "Euromex" is not included in the authorised manufacturer list, so a product description cannot be generated, as it is essential for the manufacturer to be verified and listed in the authorised database to ensure accuracy, compliance, and reliability of the information provided, which is critical for maintaining the integrity of product records and ensuring that all details align with regulatory standards and organisational policies, thereby avoiding potential errors, misrepresentation, or issues that could arise from using unverified or unauthorised manufacturers in the system, which might lead to complications in product management and customer trust.
70 x 106 x 140 mm LED Gooseneck Light 2 x 3 W LED, 6500 K, 25,000 lx - Euromex
Benefit from the combination of compact dimensions, high illuminance and flexible positioning to ensure reliable inspection lighting in workshops and laboratories; order the Euromex LED gooseneck illumination directly via Metav Werkzeuge or consult their specialists for tailored advice. Euromex LED gooseneck illumination LE.5207 — 2 × 3 W LEDs, 25,000 lx LED gooseneck illumination LE.5207 offers concentrated cold‑white light for inspection and microscopy accessories in a compact housing. 2 × 3 W LEDs with 25,000 lx illuminance Neutral 6,500 K daylight colour temperature Flexible gooseneck for precise light positioning Universal 100–240 V AC and 5 V DC supply Precise, measurable light for exacting inspection tasks The small lamp delivers a high illuminance of 25,000 lx from a modest power draw of 2 × 3 W, providing concentrated illumination for detail work. The 6,500 K colour temperature creates a neutral, daylight‑like appearance that supports accurate colour rendition during visual inspection. Compact dimensions of 70 × 106 × 140 mm (H × W × D) and a weight of 1.5 kg make the unit suitable where bench space is at a premium. These quantified characteristics support predictable results and efficient workflows in quality control or laboratory stations. Flexible positioning and accessory compatibility for targeted lighting A flexible gooseneck enables accurate alignment of the light beam, so the illuminated area can be adjusted without moving the workpiece. The product is compatible with interchangeable light arms and polarisation filters (LE.5260–LE.5264), allowing adaptation to reflective surfaces or tasks that require reduced glare. The design emphasises targeted illumination and ergonomic handling, reducing the need for repositioning and supporting steady inspection routines. The lamp’s compact footprint helps maintain a tidy workstation with uninterrupted sightlines to the object under inspection. Power options and practical operation for workshop environments The luminaire accepts both 100–240 V AC and 5 V DC, ensuring compatibility with standard mains supplies and low‑voltage setups. With LED technology providing concentrated output at low wattage, the unit achieves efficient lighting without demanding high electrical capacity. The product’s simple electrical requirements and modest weight simplify integration into existing microscopes and cold‑light source arrangements. For procurement and technical compatibility, Metav Werkzeuge’s product information and accessory listings clarify which polarisation or arm options match specific inspection applications. For precise, adaptable inspection lighting choose the Euromex LE.5207 and contact Metav Werkzeuge for competent supply and advice from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.5207 SKU: LE.5207 Manufacturer: Euromex Core specifications Dimensions: 70 x 106 x 140 mm (H x W x D) Weight: 1.5 kg Light output: 25,000 lx Light source: 2 x 3 W LED Colour temperature: 6,500 K Power supply: 100–240 V AC; 5 V DC Features and accessories Product type: LED gooseneck illumination Compatible accessories: LE.5260, LE.5261, LE.5262, LE.5263, LE.5264 (interchangeable light arms / polarisation filters) Category: Cold light sources (microscopy accessories) FAQ What light intensity does the lamp provide? The Euromex LED gooseneck illumination LE.5207 delivers up to 25,000 lx from its 2 × 3 W LED modules for concentrated inspection lighting. Is the colour temperature suitable for detailed visual inspection? Yes, the unit emits 6,500 K daylight‑neutral light, which is appropriate for accurate colour assessment during inspection tasks with the Euromex LE.5207. Which power sources are supported by this illumination? The device supports 100–240 V AC mains and 5 V DC supplies, making the LE.5207 adaptable to common workshop and laboratory power configurations. Are there compatible accessories for polarisation or specialised light arms? Interchangeable light arms and polarisation filters are available (LE.5260–LE.5264) to expand the LE.5207’s functionality for glare control and specialised inspection needs. Is the product suitable where bench space is limited? Yes, the compact footprint (70 × 106 × 140 mm) and light weight (1.5 kg) allow the gooseneck lamp to be integrated into tight workstations without occupying excessive space. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
78mm Plan Apochromatic Objective 1x, 78 mm Working Distance - Euromex
Take advantage of a plan apochromatic optical correction combined with a generous 78 mm working distance to simplify specimen handling and reduce refocusing during inspection; order the objective directly via Metav Werkzeuge or consult our specialists for compatibility checks. Euromex Plan Apochromatic Objective 1x (DZ.4010) — 78 mm Working Distance for DZ Series The Euromex DZ.4010 is a plan apochromatic microscope objective designed for stereo microscope applications, offering low distortion and an extended working distance for inspection and sample manipulation. Plan apochromatic correction for flat imaging 78 mm working distance for easy handling Compatible with DZ-series microscope bodies Optimised for high-contrast stereo imaging Improved imaging with flat-field correction and reduced chromatic aberration This objective uses plan apochromatic design principles to deliver a flat image across the field and to minimise chromatic aberration, which results in sharper, more uniform images compared with standard objectives. For users performing visual inspection or documentation, the corrected field reduces the need for image post-processing and ensures that measurements taken across the view are more reliable. The optical correction is especially beneficial when imaging larger specimens under a stereo microscope, where edge-to-edge clarity directly improves inspection throughput. Generous working distance that prioritises ease of use A 78 mm working distance provides a practical clearance between the lens and the specimen, enabling easier manipulation, probing, or illumination changes without constant refocusing. This spacing is advantageous in assembly, quality control and repair tasks where tools or probes must access the sample. The extended clearance also simplifies the use of auxiliary lighting or measurement rigs, contributing to a smoother workflow and fewer interruptions during repetitive inspection tasks. Consistent magnification and compatibility for predictable results With 1x magnification, the objective preserves the native view scale of the stereo microscope, supporting quick visual comparison and repeatable observation routines. The unit is manufactured for mounting on the DZ-series microscope body, ensuring mechanical compatibility and stable optical alignment. The consistent scale and reliable mounting reduce set-up time and support identical imaging conditions across multiple stations, which helps maintain quality standards on the production line. Practical benefits for workshop and laboratory environments Engineered for application-driven use, the optic balances performance with convenience: the corrected field and robust mounting create an inspection-ready solution that integrates into existing stereo microscopes. For teams seeking dependable, day-to-day performance, this objective offers optical performance that supports both visual inspection and documentation tasks while being straightforward to install and align on the DZ body. The result is improved inspection accuracy with minimal disruption to established processes. Choose the Euromex DZ.4010 for consistent, low-distortion stereo imaging and contact Metav Werkzeuge in Emmerich for tailored compatibility advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.4010 SKU: DZ.4010 Brand: Euromex Product type: Microscope objective Specifications Magnification: 1x Working distance: 78 mm Features Plan apochromatic correction For DZ-series mounting Category: for stereo microscopes Label: Plan apochromatisches Objektiv 1x für die DZ-Serie, Arbeitsabstand 78 mm. Zur Montage am DZ-Körper FAQ What magnification does the objective provide? The objective delivers 1x magnification, suitable for preserving the native field of view on stereo microscopes. Is the DZ.4010 compatible with other Euromex DZ models? The DZ.4010 is designed for mounting on the DZ-series microscope body and provides stable mechanical and optical alignment when fitted to compatible DZ models. How does the plan apochromatic correction benefit inspection tasks? Plan apochromatic correction reduces field curvature and chromatic aberration, yielding flatter, higher-contrast images that improve visual assessment and measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.1mm 10x Delphi-X Observer Microscope Objective 0.30 NA - Euromex
Benefit from the combination of optical precision, reliable working distance and compatibility with the Delphi‑X Observer series for smoother imaging workflows. Order the item directly via Metav Werkzeuge or request further technical clarification from our consultants. Microscope objective Delphi‑X Observer DX.7310 — 10x, NA 0.30 (Euromex) The Microscope objective Delphi‑X Observer DX.7310 delivers 10x magnification with a balanced working distance for general laboratory and life‑science imaging applications. 10x magnification for fine detail Numerical aperture 0.30 for improved resolution 8.1 mm working distance for compact setups Compatible with Delphi‑X Observer series Superior optical performance that supports reliable measurement The objective is specified as 10x with a numerical aperture of 0.30, which together determine the system's ability to resolve fine structure and to gather light efficiently. A higher numerical aperture increases the resolving power and light throughput; in practice this results in clearer image contrast and faster exposure times in fluorescence or brightfield techniques. The 8.1 mm working distance offers a compromise between close sample access and protection of both sample and front lens, so sensitive preparations can be observed without undue risk. These optical characteristics are designed to be verifiable and repeatable, forming a technical basis for consistent imaging and measurement in routine laboratory use. Designed for integration and stable imaging in compact setups Built for the Delphi‑X Observer family, the objective supports straightforward mechanical integration and alignment within upright microscope assemblies. The optical design is tuned to provide a consistent field flatness across the central image area, which is beneficial when digital sensors and camera systems are used for documentation or analysis. The objective's mechanical interface and optical correction are optimised so that image sharpness and contrast are preserved under common illumination schemes; this reduces time spent on refocusing and readjustment during experiments. For laboratories seeking efficient workflows, the combination of optical consistency and physical compatibility reduces setup time and contributes to uninterrupted operation. Confidence in handling, documentation and supplier support Made to the documented specifications and referenced in manufacturer material, the objective is intended for dependable everyday use where reproducible image quality matters. Technical data are provided in the original Life Science documentation (see source below), allowing for comparison against other objectives when selection decisions are made. The supplier network behind the product emphasises traceable documentation and component compatibility, which supports procurement decisions aimed at long‑term reliability. Where additional technical clarification is required, details and further measurement data can be requested from the distributor to ensure the objective meets the intended application and measurement tolerances. Contact Metav Werkzeuge today for a technical consultation and delivery from Emmerich; order the DX.7310 through Metav Werkzeuge or request further specification sheets by email or phone. Technical data Article number: DX.7310 SKU: DX.7310 Brand: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Data Magnification: 10x Working distance: 8.1 mm Numerical aperture: 0.30 Special features Designed for life‑science microscopy Optimised for camera integration Field flatness for central image area Reference: Life Science PDF S. 26,49 FAQ What magnification does this objective provide? The Delphi‑X Observer DX.7310 is specified with a 10x magnification, suitable for intermediate‑power observations and documentation workflows. How does the numerical aperture affect image quality? A numerical aperture of 0.30 increases light collection and resolution; the DX.7310's NA is chosen to balance contrast and depth of field for typical lab samples. Is the working distance sufficient for thicker specimens? With an 8.1 mm working distance, the objective provides reasonable clearance for coverslips and moderate specimen thickness while keeping the front lens close enough for high‑quality imaging. Can this objective be used with camera systems? Yes, the optics are optimised for camera integration and maintain central field sharpness when paired with standard microscope cameras in the Delphi‑X Observer family. Where can further technical documentation be obtained? Additional specification sheets and performance data are available on request; refer to the Life Science PDF referenced in the technical section for original values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.80mm 20x bScope Microscope Objective 0.40 NA, WD 8.80 mm - Euromex
Take advantage of the combination of high optical performance and a practical working distance for reliable laboratory imaging; the 20× magnification together with a numerical aperture (NA) of 0.40 delivers clear resolution while the 8.80 mm working distance reduces the risk of specimen contact — order the item directly via Metav Werkzeuge or ask the consultants for application advice. microscope objective bScope BS.8720 — 20× magnification, NA 0.40 (Euromex bScope series) The microscope objective bScope BS.8720 is a 20× laboratory objective designed for life science microscopy, offering a compact optical solution with an 8.80 mm working distance and a numerical aperture optimised for medium‑to‑high resolution imaging 20× magnification for detailed imaging Numerical aperture 0.40 for improved resolution 8.80 mm working distance for sample clearance Exceptional image detail from a compact optic This objective delivers 20× magnification with a numerical aperture (NA) of 0.40, a combination that increases resolving power while maintaining brightness for most routine laboratory applications. The NA describes the light‑gathering ability of the lens; a higher NA improves contrast and fine‑detail resolution, which is particularly relevant when differentiating cellular structures or fine surface textures. The optical design balances contrast and depth of field so that users benefit from sharper images without excessive loss of focus plane, making the lens suitable where clear structural detail is required. Practical working distance to protect samples and tools With a working distance of 8.80 mm, the objective offers a usable gap between the front lens and the specimen, reducing the chance of accidental contact during focusing or micro‑manipulation. This clearance is useful when working with thicker mounts, cover slips or when using microtools adjacent to the specimen. The combination of the specified working distance and the objective’s optical parameters supports stable handling and repeatable positioning, which speeds up routine workflows and reduces downtime due to sample damage or re‑preparation. Designed for reliable life science applications Part of the bScope series from Euromex, the optical unit is specified in Life Science documentation and engineered for repeatable performance in laboratory environments. The lens construction and specification focus on delivering consistent imaging across sessions, promoting measurement reproducibility and dependable documentation of observations. For laboratories that require dependable optics without excessive complexity, this objective provides a straightforward solution that integrates into standard microscopy setups and supports common life science tasks. Contact Metav Werkzeuge for tailored technical advice on the Euromex bScope BS.8720 objective and to discuss supply options from Emmerich for rapid delivery Technical data Article number: BS.8720 SKU: BS.8720 Manufacturer: Euromex Model series: bScope Product type: microscope objective Numbers / Core technical data Magnification: 20× Working distance: 8.80 mm Numerical aperture: 0.40 Special features 20×/0.40 PLPHi objective Life Science PDF reference: Life Science PDF p.9 WD 8.80 mm FAQ What magnification and numerical aperture does this objective offer? The objective provides 20× magnification with a numerical aperture (NA) of 0.40, giving a balance of resolution and brightness for many laboratory tasks. How much working distance is available and why it matters? The working distance is 8.80 mm, which creates physical clearance between the lens and the specimen to reduce the risk of contact during focusing or manipulation. Is this objective suitable for life science microscopy? Yes; the specification originates from life science documentation and the optic is intended for laboratory microscopy where medium‑to‑high resolution is required. Does the objective include mounting accessories or a cover slip correction? No mounting accessories are specified in the available data; the listing describes the optical parameters only. Where can additional technical details be obtained? Further technical information and clarification can be requested from Metav Werkzeuge; the product listing references the Life Science PDF (page 9) for the original specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm x 110mm x 165mm Cold Light Source 20W Halogen 3000K, 110/230V AC - Euromex
Take advantage of the compact design, 20 W halogen cold illumination and the 40 cm self-supporting light guide for consistent, glare-free inspection. Order the unit directly via Metav Werkzeuge or consult their technical advisors for tailored guidance. Cold Light Source LE.5209 – 20 W halogen, 40 cm light guide (Euromex) The Cold Light Source LE.5209 is a compact halogen illumination module for microscopy accessories and benchtop inspection tasks, offering stable fixed-intensity light and versatile mains compatibility. 20 W halogen cold light source Fixed-intensity illumination at 3000 K Self-supporting 40 cm light guide, Ø 6 mm Compact design: 80 x 110 x 165 mm Reliable, glare-free illumination for precise inspection The electric lamp delivers 20 W halogen output as a cold light solution with fixed intensity, ensuring steady brightness for visual inspection and image capture. The 3000 K colour temperature provides a warm white emission that preserves natural colour rendition, which supports accurate assessment of surface finishes and component details. Stable illumination reduces the need for repeated adjustments, contributing to more efficient inspection workflows and consistent visual results. Robust, compact design for laboratory and workshop benches With dimensions of 80 x 110 x 165 mm and a weight of 2 kg, the unit fits easily on crowded workbenches and in small laboratory setups. The compact benchtop footprint and quiet operation make it suitable where space and disturbance are considerations. Dual-voltage capability (110 or 230 V AC) allows integration across different mains environments without additional transformers, simplifying installation and minimising downtime when moving between sites. Flexible positioning for targeted lighting and confined spaces The supplied self-supporting light guide (length 40 cm, Ø 6 mm) enables precise placement of the light beam into tight or awkward spaces while maintaining its position without additional clamps. This design facilitates targeted illumination for delicate inspection tasks and reduces stray light, improving contrast on the area of interest. The rigid yet adjustable guide is particularly useful when working with small assemblies, solder joints or detailed surface inspections where focused, stable light is required. Consistent results and straightforward system integration The fixed-intensity halogen source delivers reproducible lighting conditions that help to standardise inspection procedures and visual checks. The unit is listed under microscopy illumination accessories and is designed for straightforward integration into existing inspection stations and microscope setups. Technical documentation and compatibility information are available from Metav Werkzeuge for those assessing fit with specific optical systems or laboratory arrangements. Contact Metav Werkzeuge for expert advice on integrating the LE.5209 into existing inspection workflows and for rapid supply from Emmerich; technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: LE.5209 SKU: LE.5209 Type: Cold light source Brand: Euromex Specifications Power: 20 W Colour temperature: 3000 K Weight: 2 kg Dimensions: 80 x 110 x 165 mm (H x W x D) Light guide length: 40 cm Light guide diameter: 6 mm Voltage: 110 or 230 V AC Features Cold light source, halogen, fixed intensity Self-supporting light guide, 40 cm, Ø 6 mm Suitable for microscopy illumination Compact benchtop unit FAQ Is the unit suitable for microscope illumination? The LE.5209 is intended as a microscopy illumination accessory and provides stable 20 W halogen cold light suitable for many inspection and visualisation tasks. What does the 3000 K rating mean for visual checks? A 3000 K colour temperature on the LE.5209 produces warm white light, which preserves colour accuracy for surface inspection and helps with reliable visual assessment. Can the unit run on different mains supplies? The LE.5209 accepts 110 or 230 V AC, allowing use in locations with either mains voltage without additional conversion equipment. How long and rigid is the light guide? The LE.5209 is supplied with a self-supporting light guide of 40 cm length and Ø 6 mm, designed to maintain position for targeted illumination in confined areas. Does the lamp provide a constant brightness level? The halogen source in the LE.5209 operates at fixed intensity, ensuring consistent brightness for repeatable inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm x 70mm x 90mm HD Microscope Camera With HDMI And USB 5 MP, 2592x1944 Pixels, 11.6in HD Screen - Euromex
Take advantage of the 5 MP capture and integrated 11.6" HD screen for immediate inspection, combined with HDMI and USB outputs for a seamless imaging workflow; order the unit directly via Metav Werkzeuge or consult our specialists for tailored integration into the production process. HD-Lite VC.3031-HDS microscope camera with 11.6" HD screen and HDMI/USB outputs The HD-Lite VC.3031-HDS is a compact microscope camera with an integrated HD screen, designed for digital imaging, documentation and measurement tasks in laboratory and workshop environments. 5 MP resolution with 2592 x 1944 pixels 11.6" HD screen for live observation HDMI and USB 2.0 digital outputs Includes C‑Mount 0.45x adapter and 16 GB card Sharper captures for reliable inspection The integrated camera unit combines a 5 MP sensor with a Sony CMOS 1/2.8" image sensor and a pixel size of 2 x 2 µm, enabling detail-rich still images at 2592 x 1944 pixels while maintaining usable live previews. The camera uses progressive scan capture, which reduces motion artefacts compared with interlaced systems and supports measurement and documentation tasks where image clarity is essential. Live observation runs at up to 1920 x 1080 at 15 fps (mode dependent), so users gain the benefit of high-resolution captures alongside a fluid live image for positioning and inspection. Integrated display and a streamlined workflow An 11.6" HD screen is built into the device to allow immediate review without external monitors, while HDMI and USB 2.0 outputs permit direct connection to recording devices or PC workstations. The unit is supplied with ImageFocus Plus software for image acquisition and basic measurement routines, and a 16 GB SD card is included for on‑site archiving (supports up to 32 GB). The supplied C‑Mount 0.45x adapter and reduction adapters (30.0 and 30.5 mm → 23.2 mm) simplify mounting to a wide range of microscope heads and stand configurations, reducing setup time and minimizing additional purchases. Built for laboratory and workshop conditions Designed for continuous use, the camera accepts a broad input range (100–240 Vac to 12 Vdc/2 A) and operates across a practical environmental window (0–60 °C; 45–85 % relative humidity). The device reports a measured noise level of 40.5 dB and a sensitivity of 1 V/lux‑sec, characteristics that support daytime-lit bench work as well as controlled inspection environments. The progressive scan sensor and robust power handling make this a dependable choice for routine quality control, R&D documentation and educational demonstration tasks. Ready to use with calibration and accessories The package includes practical accessories to get straight to work: a calibration slide (10 mm/100) for accurate scaling, a 16 GB memory card for immediate image storage and the necessary adapters for common microscope tubes. This means faster commissioning and reproducible measurement results without hunting for additional items. Software-driven workflows and a fully integrated display permit teams to document findings, compare captures and archive results quickly — valuable when traceable records are required for audits or process control. Compatibility with Windows 10, 11 and Mac OS ensures integration into most existing lab IT setups. For expert advice on integrating the Euromex HD‑Lite VC.3031‑HDS into inspection routines or for ordering assistance, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants can advise on mounting, calibration and software workflows. Technical data Article number: VC.3031-HDS SKU: VC.3031-HDS Product type: Microscope camera with screen Model series: HD-Lite Brand: Euromex Core specifications Resolution: 5 MP (2592 x 1944 pixels) Live image: 1920 x 1080 pixels at 15 fps (mode dependent) Sensor: Sony CMOS 1/2.8" Pixel size: 2 x 2 µm Power supply: 100–240 Vac → 12 Vdc / 2 A Operating temperature: 0–60 °C Humidity range: 45–85 % Noise level: 40.5 dB SD card: 16 GB included, up to 32 GB supported Features and accessories Outputs: HDMI and USB 2.0 digital Display: 11.6" HD screen Adapter: C‑Mount 0.45x; adapters 30.0 and 30.5 mm to 23.2 mm Included: 16 GB memory card; calibration slide 10 mm/100 Software: ImageFocus Plus Scan: Progressive scan Sensitivity: 1 V/lux‑sec Live image vs capture: Live image 1080p, capture at 2592 x 1944 FAQ What image resolutions are available for still images and live view? Still images are captured at 2592 x 1944 pixels (5 MP); live view is provided at 1920 x 1080 (Full HD) with up to 15 fps, depending on mode and settings of the HD‑Lite VC.3031‑HDS. Which connections are provided for recording or external monitors? The unit supplies both HDMI and USB 2.0 digital outputs, enabling direct connection to monitors, capture devices or a PC running ImageFocus Plus. Is the camera supplied ready for measurement tasks? Yes — the HD‑Lite VC.3031‑HDS is delivered with a calibration slide (10 mm/100) and ImageFocus Plus software, allowing reproducible scaling and basic measurement workflows. Can the camera be used with common microscopes and stands? The camera includes a C‑Mount 0.45x adapter plus reduction adapters (30.0 and 30.5 mm → 23.2 mm), which cover typical tube diameters found on many microscope heads and inspection stands. Which operating systems are supported for PC integration? Image acquisition and file transfer are supported on Windows 10, Windows 11 and Mac OS, enabling straightforward integration into most laboratory IT environments. What conditions are required for reliable operation? The device operates between 0–60 °C and 45–85 % relative humidity, and accepts 100–240 Vac input for stable use in lab and workshop settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com