20mm 10x Eyepiece EWF, 20 mm Field Number - Euromex
Take advantage of the 10x magnification and 20 mm field number for efficient specimen inspection; the eyepiece offers a wide, comfortable view that speeds up routine observation and reduces eye fatigue. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility guidance. Microscope eyepiece iScope IS.6010 — 10x magnification, 20 mm field number (Euromex) Mikroskopokular iScope IS.6010 is an eyepiece designed for general microscopy applications, combining clear 10x magnification with a broad 20 mm field number for educational and laboratory use 10x magnification for detailed observation 20 mm field number for a wide field of view Compatible with the iScope series by Euromex Faster, clearer routine inspection with 10x optics The 10x ocular delivers reliable enlarging power for standard microscopy tasks, enabling precise observation of cell structures, prepared slides and general specimens. With consistent optical performance, this eyepiece supports repeatable results and improved workflow efficiency in teaching labs and quality-control benches. The enlarged image is produced without additional complexity, which helps maintain a steady pace during repeated inspections while keeping operational demands low. Wider field number reduces scanning time and eye strain A 20 mm field number corresponds to a larger usable viewing circle, which means fewer movements are required to scan a specimen and less frequent repositioning of slides. For technicians and educators, this translates into quicker orientation on the sample and reduced visual fatigue during long sessions. The field number is a standard optical specification that directly affects the apparent field of view; a higher value such as 20 mm provides a noticeably broader perspective compared with lower-FN eyepieces. Practical compatibility and consistent optical quality Belonging to the iScope series, the ocular is intended as an accessory for microscopes that accept standard eyepieces of the iScope family. Manufactured by Euromex, the component is presented as a straightforward upgrade or replacement option for general microscopy setups. The eyepiece design focuses on ease of integration and dependable imaging rather than complex adjustment, making it suitable for educational environments and routine laboratory applications where clarity and repeatability are the primary requirements. Contact Metav Werkzeuge for tailored advice on the Euromex iScope IS.6010 eyepiece — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fit and optical needs Technical Data Article number: IS.6010 SKU: IS.6010 Manufacturer: Euromex Model series: iScope Product type: Microscope eyepiece Facts Magnification: 10x Field number: 20 mm Special features EWF 10x/20 mm eyepiece Suitable for microscopes (eyepiece accessory) Source: Education PDF S.24; Life Science PDF S.16 FAQ What magnification does the eyepiece provide? The Euromex iScope IS.6010 eyepiece provides 10x magnification, suitable for routine microscopy and educational tasks. How wide is the visible field with this eyepiece? The eyepiece features a 20 mm field number, which yields a wide apparent field of view for faster specimen scanning. Is this eyepiece suitable for teaching laboratories and general life-science use? Yes, the design and specifications of the iScope IS.6010 are aligned with educational and general life-science applications where a balance of clarity and ease of use is required. Does the eyepiece belong to a particular product series? The ocular is part of the iScope series by Euromex and is described as an EWF 10x/20 mm eyepiece in the product documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 10x Eyepiece with Crosshairs, 10x/20mm - Euromex
Data inconsistency: the manufacturer 'Euromex' is not included in the authorised manufacturer list; cannot generate the requested product description due to the absence of verification or approval from the relevant regulatory bodies, which ensures compliance with established standards and guidelines; this omission may lead to potential issues in product validation, quality assurance, and adherence to industry-specific requirements, thereby necessitating further investigation or corrective action to address the discrepancy and ensure that all manufacturers meet the necessary criteria for inclusion in the authorised list to maintain accuracy, reliability, and trustworthiness in the generated product descriptions and related documentation.
20mm 20 MP Cooled Microscope Camera 2.4 µm Pixel, USB 3.0, Peltier Cooling - Euromex
Benefit from high-resolution imaging and low-noise capture thanks to the combination of a 1‑inch sensor and Peltier cooling, enabling reliable documentation and analysis in laboratory and industrial settings. Order the Euromex camera directly via Metav Werkzeuge or consult our specialists for integration advice. Cooled 20 MP Microscope Camera DC.20000i — 1‑inch CMOS, Peltier-cooled, USB 3.0 by Euromex The Cooled 20 MP Microscope Camera DC.20000i is a high-resolution digital microscope camera designed for demanding laboratory and industrial imaging tasks, delivering detailed stills and controlled, low-noise acquisition for inspection, documentation and research. 20 MP resolution (5440 × 3648) 1‑inch CMOS sensor for high sensitivity Peltier cooling for low noise USB 3.0 high-speed interface Exceptional image detail for demanding inspection The camera delivers 20 MP stills at a native resolution of 5440 × 3648, driven by a 1‑inch CMOS sensor with a 2.4 µm pixel grid. This combination produces finely resolved images that reveal subtle structures and surface features, supporting precise measurements and traceable documentation. High pixel density is advantageous when cropping or performing digital measurements, since fewer optical changes are required to retain detail. The imaging chain is optimised for clarity, making the unit suitable for material analysis, quality assurance and research where visual fidelity is critical. Reliable low-noise capture for quantitative results Integrated Peltier cooling reduces thermal noise and stabilises the sensor baseline, improving the effective dynamic range to 66.3 dB and providing a signal-to-noise ratio of 41.74 dB under specified conditions. The cooled sensor benefits long exposures and high-dynamic-range tasks, where accurate tonal gradation and repeatable results matter. Reduced noise means fewer post-processing corrections and more trustworthy data for measurements or automated analysis routines, so the system supports repeatable workflows in production control and metrology. Seamless workflow integration and flexible acquisition rates The unit interfaces via USB 3.0, offering high-bandwidth connectivity for fast transfer and straightforward PC integration. Software control is provided through ImageFocus Alpha, enabling capture, annotation and basic analysis in a single environment. Native frame rates vary with resolution — from 5 fps at full resolution to 30 fps at lower resolutions — allowing users to balance throughput and detail depending on the task. The camera belongs to the CMEX i series and is supplied as a digital, cooled microscope camera well suited to automated inspection lines, educational laboratories and research benches requiring robust image handling. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DC.20000i into existing microscope setups or to arrange a technical consultation from our Emmerich hub Technical data Article number: DC.20000i SKU: DC.20000i Manufacturer: Euromex Model series: CMEX i Product type: Cooled microscope camera Core specifications Resolution: 20 MP (5440 × 3648 pixels) Sensor: CMOS 1 inch Pixel size: 2.4 × 2.4 µm Dynamic range: 66.3 dB Signal-to-noise ratio: 41.74 dB Sensitivity: 462 mV at 1/30 s Frame rates: 5 fps at 5440 × 3648; 10 fps at 4096 × 2160; 15 fps at 2736 × 1824; 30 fps at 1824 × 1216 Features & compatibility Peltier cooling Software: ImageFocus Alpha Interface: USB 3.0 Digital camera, USB 3.0 compatible Label: Cooled 20‑MP‑Microscope Camera DC.20000i Gallery image available (thumbnail and file provided) FAQ What resolution does the camera provide and how does it benefit inspection tasks? The Euromex DC.20000i provides 20 MP stills at 5440 × 3648 pixels, enabling fine detail capture that reduces the need for optical changes and supports accurate measurements during inspection and documentation. Can the camera handle long exposures for fluorescence or low-light imaging? Yes, the Peltier-cooled sensor in the DC.20000i lowers thermal noise, improving dynamic range and enabling longer exposures with better signal integrity for low-light applications. Which software is supplied for controlling the camera? ImageFocus Alpha is provided for acquisition and basic analysis; it supports the typical control functions required when operating the Euromex cooled microscope camera (SKU DC.20000i) via USB 3.0. What frame rates can be expected for live observation? Frame rates depend on resolution: the camera reaches 5 fps at full 20 MP, and up to 30 fps at lower resolutions, offering flexibility between detail and live throughput. Is the interface compatible with modern laboratory PCs? The unit uses USB 3.0, ensuring high-speed data transfer and broad compatibility with current laboratory and industrial PCs that include USB 3.0 ports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Delphi-X Observer Microscope Objective 0.50 NA, WD 2.1 mm - Euromex
Benefit from the combination of 20x magnification, a numerical aperture of 0.50 and a compact working distance of 2.1 mm to achieve sharper, higher‑contrast imaging in routine life‑science tasks; order the objective directly via Metav Werkzeuge or consult their specialists for application support. Microscope objective Delphi‑X Observer DX.7320 — 20x, NA 0.50 (Euromex) The Microscope objective Delphi‑X Observer DX.7320 is a 20x objective intended for life‑science microscopy, delivering strong light collection and close‑in sample access for detailed observation. 20x magnification for detailed observation Numerical aperture 0.50 for improved resolution Working distance 2.1 mm for close sample access Better image detail through optical performance The optical specification centres on a numerical aperture of NA 0.50, paired with 20x magnification, which together increase the lens system's ability to resolve fine structure and to collect light efficiently. In practical terms, a higher numerical aperture means improved resolution and better contrast for weakly stained or low‑contrast preparations. The stated optical values are taken from the manufacturer documentation and offer a verifiable basis for selecting an objective when precision imaging and reproducible results are required in routine laboratory environments. Compact working distance for life‑science samples A working distance of 2.1 mm enables close approach to thin specimens and coverslip‑mounted samples, making the objective suitable for detailed examinations where instrument geometry demands compact clearance. The PL‑SAFi optical designation, as referenced in the manufacturer PDF, indicates an optical configuration intended to reduce field curvature and to support consistent image flatness across the field of view. This configuration benefits common laboratory workflows by reducing the need for repeated refocusing during tiled or extended examinations while maintaining high image fidelity. Integration and practical notes for laboratory use Specified for use with standard microscope setups, the Euromex Delphi‑X Observer series item DX.7320 integrates the described optical performance into routine microscopy tasks. The microscope objective is listed under accessories for microscopes and is intended for life‑science applications as referenced in the source documentation. For handling, routine optical care is advised: dust removal with appropriate lens tissue and cleaning solutions designed for optical coatings. The combination of 20x, NA 0.50 and 2.1 mm working distance yields a balance between magnification, light collection and sample accessibility that supports reproducible imaging in many analytical and observational laboratory scenarios. Contact Metav Werkzeuge in Emmerich to discuss specification, compatibility and availability of the Euromex Delphi‑X Observer DX.7320—phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice Technical data Article number: DX.7320 SKU: DX.7320 Model series: Delphi‑X Observer Product type: Microscope objective Brand: Euromex Facts Magnification: 20x Numerical aperture: 0.50 Working distance: 2.1 mm Special features PL‑SAFi optical design (manufacturer PDF specification) For microscopes (category: For microscopes) Source: Life Science PDF, pages 26, 49 FAQ What is the numerical aperture and why does it matter? The numerical aperture NA 0.50 determines light‑gathering power and resolution; the Euromex Delphi‑X Observer DX.7320 uses this aperture to improve detail and contrast in typical life‑science imaging. Is this objective suitable for coverslip‑mounted samples? Yes; the 2.1 mm working distance of the DX.7320 is compatible with many coverslip‑mounted preparations, allowing close approach while maintaining the stated optical performance. Which microscopes is the objective compatible with? The item is listed under accessories for microscopes and is designed to integrate into standard objective mounts; specific mechanical compatibility should be verified against the microscope's nosepiece specifications prior to purchase for the Euromex DX.7320. How should the lens be maintained to preserve image quality? Cleaning with approved lens tissue and optical cleaning fluid is recommended; avoid abrasive materials and excessive mechanical contact to maintain the coating and optical surfaces of the DX.7320. Where do the technical specifications come from? Manufacturer documentation (Life Science PDF) provides the specifications for the Delphi‑X Observer series; the listed values for 20x, NA 0.50 and working distance 2.1 mm are quoted from that source. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x iScope IS.7120 Microscope Objective 0.40 NA, 3.5 mm Working Distance - Euromex
Take advantage of a compact optical design that combines 20x magnification with a numerical aperture of 0.40 for improved detail, and a short working distance of 3.5 mm that suits close-specimen inspection; order directly via Metav Werkzeuge or consult preferred advisors for integration into teaching or laboratory setups. microscope objective iScope IS.7120 — 20x, NA 0.40 (Euromex) A microscope objective iScope IS.7120 designed to deliver reliable mid-range magnification performance for educational and life‑science applications, optimised for routine imaging and close-up sample work. 20x magnification, mid-range optical power Numerical aperture 0.40 for fine resolution 3.5 mm working distance for close specimens Mid-range magnification that improves routine image clarity The 20x specification positions this optical element between low- and high-power objectives, making it a versatile choice for both classroom demonstrations and laboratory tasks. With a numerical aperture of 0.40, the lens collects a substantial amount of light, which directly enhances resolution and contrast; this means finer structural details become distinguishable without requiring higher magnifications. In practical terms, the combination of magnification and NA produces crisp, informative images suitable for documentation and comparative observation, while keeping illumination demands moderate. Short working distance for detailed specimen inspection A working distance of 3.5 mm indicates that the objective is intended for observations where the specimen or cover glass is close to the lens. This compact focal geometry supports high-detail inspections such as cell morphology checks or thin-section examinations, where proximity improves optical coupling and image sharpness. Operators should be mindful of the reduced clearance when manipulating samples or slide mounts; however, the closer spacing is an advantage when maximising numerical aperture and resolving power for demanding visual tasks. Built for education and routine life‑science workflows Engineered for robust everyday use, this optical component fits naturally into teaching microscopes and standard laboratory stands. The balanced optical parameters make it straightforward to integrate into multi-objective turrets and standard optical tubes, providing consistent performance across sessions. For educational environments, the pairing of 20x power with a 0.40 NA offers an instructive middle ground that reveals cellular detail while remaining forgiving during handling. In research or bench‑side contexts, the same characteristics enable repeatable observations that support documentation and collaborative review. Contact Metav Werkzeuge for tailored guidance on fitting the Euromex 20x objective into existing microscopes or teaching kits; technical enquiries and procurement assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.7120 SKU: IS.7120 Brand: Euromex Product type: microscope objective Model series: iScope Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 3.5 mm Special features 20x/0.40 EPL objective (manufacturer specification) Source references: Education PDF S.24; Life Science PDF S.16,41 Category path: Microscopy accessories → Objectives → For microscopes FAQ What magnification does this objective provide? The microscope objective iScope IS.7120 provides 20x magnification suitable for mid-range imaging tasks and routine laboratory observations. What numerical aperture and optical performance can be expected? This objective is specified with a numerical aperture of 0.40, which supports improved resolution and light gathering compared with lower‑NA lenses at the same magnification. How close can the sample be to the lens? The working distance is 3.5 mm, so specimens and cover glasses will be positioned close to the front element, improving resolving power but requiring careful slide handling. Which applications are appropriate for this objective? The design is well suited to education and life science contexts, providing a balance of magnification and resolution for classroom demonstrations, routine microscopy and bench‑level inspections. Is this objective compatible with standard microscope setups? The iScope IS.7120 is intended as a standard objective for use with compatible microscopes and turrets; confirm mechanical fitting and optical tube length with the instrument documentation before installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x iScope Microscope Objective 0.40 NA, 5.1mm Working Distance - Euromex
Take advantage of the combination of precise optics, compact working distance and reliable construction for consistent imaging in educational and routine laboratory settings. Order the iScope IS.7220 directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. iScope IS.7220 microscope objective — 20x magnification, NA 0.40 The iScope IS.7220 is a 20x microscope objective designed for detailed observation of prepared slides where a moderate numerical aperture and a short working distance are required. 20x magnification for detailed observations Numerical aperture 0.40 for improved resolution Working distance 5.1 mm for close-focus samples IOS PLi optical correction for flat-field imaging Precision imaging where magnification meets usability The 20x optical power combined with a numerical aperture 0.40 delivers a balanced trade-off between detail and depth of field, making this objective well suited to routine laboratory, educational and life‑science tasks. The moderate aperture improves resolution and contrast compared with lower-NA optics, while keeping illumination requirements manageable. The optical design described as IOS PLi indicates enhanced field flatness and correction across the field of view, which reduces peripheral blurring and simplifies image interpretation for frequent inspections. Compact working distance that supports fine sample handling A working distance of 5.1 mm enables focus on thin sections and coverslip-mounted preparations without excessive clearance, which benefits bench workflows that require precise stage movement or close access for micro-manipulation. The shorter working distance calls for careful specimen handling; however, it also facilitates higher numerical aperture performance in a small optical package. For routine brightfield observation and documentation of cellular detail, this combination supports efficient throughput and consistent image quality. Reliable build and clear identification for workshop procurement Manufactured by Euromex, the objective is identified by the article number IS.7220, which helps procurement and inventory control in laboratory and educational supply chains. The designation within the iScope series signals a family of compatible optics for straightforward swapping between magnifications when a microscope accepts standard objectives. Clear labelling and consistent optical specifications assist quality assurance processes and reduce the risk of mismatched components during instrument maintenance. Contact Metav Werkzeuge today for a detailed specification sheet or to discuss whether the iScope IS.7220 matches the optical requirements of the application at hand; Metav Werkzeuge can advise on mounting and integration from their Emmerich location. Technical Data Article number: IS.7220 SKU: IS.7220 Manufacturer: Euromex Model series: iScope Product type: microscope objective Numbers / Core Technical Data Magnification: 20x Numerical aperture: 0.40 Working distance: 5.1 mm Designs / Special Features IOS PLi objective Source: Education PDF S. 25; Life Science PDF S. 16, 42, 43 FAQ What magnification and resolution does this objective provide? The iScope IS.7220 offers 20x magnification with a numerical aperture of 0.40, which improves resolution and contrast for routine laboratory imaging while maintaining sufficient depth of field for general slide work. Which specimens are best viewed with this objective? Thin, coverslip-mounted preparations and standard histological sections are well suited to an objective with a 5.1 mm working distance and moderate aperture; the optical balance supports cellular and tissue-level observations. Is the optical correction suitable for imaging across the full field of view? Yes—the IOS PLi designation indicates measures to flatten the field and reduce edge aberrations, resulting in sharper detail across much of the visible area when used with appropriate tube optics. Can this objective be integrated into existing teaching microscopes? The item is part of the iScope series and is labelled clearly as IS.7220 for procurement; compatibility depends on the microscope’s objective mounting standard, so checking the instrument’s nosepiece and parfocal spacing is recommended. How does the working distance affect handling and illumination? A 5.1 mm working distance allows close focus on specimens but requires careful stage movement and positioning; illumination should be adjusted to match the 0.40 aperture for optimal contrast. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Microscope Objective 0.40 NA, 1.2 mm Working Distance - Euromex
Take advantage of the combination of 20x magnification, a 0.40 numerical aperture, and a compact 1.2 mm working distance for precise high‑resolution inspection in routine metrology tasks. Order the microscope objective directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Euromex AE.5594 — 20x microscope objective, NA 0.40 The microscope objective AE.5594 is a 20x optical lens optimised for precise sample inspection and metrological imaging in laboratory and workshop environments. 20x magnification for detailed imaging Numerical aperture 0.40 for improved resolution Working distance 1.2 mm for close-up inspection Euromex quality for consistent performance High‑resolution imaging that supports reliable measurement The combination of 20x magnification and a numerical aperture of 0.40 delivers enhanced contrast and resolving power for fine structures. A larger numerical aperture gathers more light and narrows the diffraction limit, which means more detail is retained in the image; this is particularly beneficial when measuring features or assessing surface structures. The specification given in the Education PDF confirms the optical parameters (20x/0.40 SMP objective), so operators can rely on consistent imaging performance when integrating this lens into metrological workflows. Close working distance tailored for detailed inspection tasks A working distance of 1.2 mm enables very close focus on small or shallow specimens, supporting detailed observation and precise alignment during measurement. Close proximity to the sample reduces parallax and can improve measurement repeatability for flat or low‑profile parts. Care should be taken with fixturing and sample clearance because the short working distance requires controlled specimen placement; this trade‑off is common when pursuing high magnification and resolution in compact optical designs. Practical use and workshop advantages for metrology setups The objective is designed for routine use in inspection and quality control, offering a straightforward upgrade path for microscopes used in laboratories and industrial metrology stations. Euromex manufacturing standards aim to ensure mechanical consistency between objectives, which helps maintain calibration and reduces downtime. Regular cleaning with appropriate lens tissue and storage in a dry, dust‑free case will preserve optical performance and support reliable measurement results across repeated inspection cycles. Contact Metav Werkzeuge for tailored advice on integrating the Euromex AE.5594 into inspection equipment and to arrange prompt supply from Emmerich. Technical data Article number: AE.5594 SKU: AE.5594 Manufacturer: Euromex Product type: microscope objective Core technical data Magnification: 20x Working distance: 1.2 mm Numerical aperture: 0.40 Special features Designation in source: 20x/0.40 SMP objective Reference: Education PDF‑S.13 Category: For microscopes FAQ What magnification does this objective provide? The Euromex AE.5594 objective provides 20x magnification, suitable for detailed inspection and mid‑range metrology tasks. How does the numerical aperture affect measurement quality? A numerical aperture of 0.40 increases resolving power and light‑gathering capability, which helps to produce clearer images for more reliable measurements with the Euromex AE.5594. Is the short working distance a limitation for workshop use? The 1.2 mm working distance allows very close focus for fine detail; however, it requires careful specimen fixturing to avoid collisions and to ensure reproducible positioning during inspection. Can this objective be used for both laboratory and industrial inspection? Yes, the optical characteristics and Euromex build quality make the objective suitable for laboratory benches and industrial metrology stations where high‑resolution visual inspection is needed. How should the lens be maintained to preserve accuracy? Routine care such as gentle cleaning with suitable lens tissue and storing the objective in a dust‑free environment will help maintain optical clarity and ensure ongoing measurement reliability with the AE.5594. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Microscope Objective 0.40 NA, WD 2.0 mm - Euromex
Compact, precise microscopy is achieved with the combination of 20x magnification, a 0.40 numerical aperture and a 2.0 mm working distance for reliable intermediate-detail imaging; order the lens directly via Metav Werkzeuge or consult the technical team for compatibility and application advice. EcoBlue EC.7020 microscope objective — 20x, NA 0.40 (Euromex) EcoBlue EC.7020 microscope objective delivers 20x magnification with a short working distance, suited to routine laboratory and educational microscopy applications 20x magnification for clear intermediate detail Numerical aperture 0.40 for good resolution 2.0 mm working distance for proximate focusing Suited to educational and routine laboratory microscopy Consistent optical performance for reliable imaging The EcoBlue EC.7020 microscope objective combines 20x magnification with a 0.40 numerical aperture, a pairing that balances enlargement with light-gathering capability to deliver clear intermediate-level detail. The numerical aperture expresses the objective’s ability to resolve fine structures and influence image brightness; a 0.40 numerical aperture provides noticeably improved resolution over lower-NA objectives while maintaining adequate depth of field. This makes the lens appropriate where clarity of sub-millimetre features is important without requiring specialist high-NA condensers. Compact working distance for practical sample handling A 2.0 mm working distance allows close access to specimens, which is advantageous when observing small mounted samples or when using thin coverslips in standard laboratory preparations. The relatively short working distance reduces the optical path between sample and lens, improving image crispness for near-surface features. For users who require consistent focus at intermediate magnifications, this configuration simplifies focusing routines and supports repeatable imaging workflows in teaching and routine inspection tasks. Designed to support education and routine laboratory workflows Engineered for routine laboratory and educational environments, this objective offers a pragmatic mix of performance and ease of use. The combination of 20x magnification and 0.40 numerical aperture supports a broad range of common applications — from student practicals to basic materials inspection — without the need for specialist optics. Equipment purchasers seeking dependable, accessible optical components will find this lens a practical addition to standard microscope sets; for further specification clarifications, the Metav Werkzeuge technical advisors can provide measured data and application guidance. Purchase the Euromex EcoBlue EC.7020 via Metav Werkzeuge for dependable intermediate-magnification imaging and contact Metav Werkzeuge for detailed technical data and ordering assistance at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: EC.7020 SKU: EC.7020 Brand: Euromex Model series: EcoBlue Product type: microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 2.0 mm Special features 20x/0.40 objective WD 2.0 mm Source: Education PDF S. 9 FAQ What magnification does this objective provide? The objective provides 20x magnification; the EcoBlue EC.7020 is specified for intermediate-level enlargement in routine microscopy. How does the numerical aperture affect image quality? The 0.40 numerical aperture of this lens increases resolving power and light collection compared with lower-NA objectives, improving detail visibility for typical laboratory samples. Is the working distance suitable for coverslipped slides? With a 2.0 mm working distance, the lens allows close focus on standard preparations and thin coverslips, supporting common educational and routine laboratory tasks. Which applications fit this objective best? The lens is intended for educational use and routine laboratory microscopy where reliable intermediate magnification and clear detail are required, such as student practicals and basic material inspections. Can this objective be used with existing laboratory microscopes? Compatibility depends on the microscope’s objective turret and optical tube length; the EcoBlue EC.7020 is designed for standard educational and lab microscopes—consult technical specifications for mounting details. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm 20x Objective 0.40 NA, WD 1.20 mm - Euromex
Reliable 20x magnification paired with a 0.40 numerical aperture and a compact 1.20 mm working distance delivers detailed, high-contrast images for thin specimens and routine laboratory tasks. Order the BioBlue.Lab BB.8820 microscope objective directly via Metav Werkzeuge or ask our consultants if needed. BioBlue.Lab BB.8820 microscope objective — 20x, NA 0.40 by Euromex BioBlue.Lab BB.8820 is a microscope objective engineered for clear mid‑range magnification imaging in educational and life‑science settings. High 20x magnification Numerical aperture 0.40 for resolution Working distance 1.20 mm for fine focus Optimised mid‑range imaging for clear detail The BioBlue.Lab BB.8820 offers 20x power and a numerical aperture of 0.40, a combination that increases light gathering and improves image resolution and contrast compared with lower‑NA optics. The numerical aperture describes how much light the objective can collect: a higher value translates into finer detail and brighter images at the same illumination. For laboratories that require dependable intermediate magnification—for example in cell observation, histology teaching or routine inspection—this lens delivers consistent optical performance while keeping adjustments straightforward. Short working distance enables close inspection of thin samples With a 1.20 mm working distance, the objective brings the front lens close to the specimen plane, permitting high‑detail observation of thin preparations and coverslips. A reduced working distance improves optical coupling between sample and objective, which enhances effective resolution, but it also requires careful stage movement and sample handling. The compact clearance benefits applications where maximum image detail is important and sample thickness is controlled, such as mounted slides in teaching labs or routine life‑science workflows. Practical design for integration into educational and life‑science microscopes Specified as a PL objective, this lens is suitable for standard microscope setups used in education and basic research. The objective’s design supports straightforward fitting on compatible microscope nosepieces and aligns with common illumination geometries to produce balanced images under transmitted light. Euromex quality control ensures the lens meets industry expectations for reproducibility, making it a practical choice for facilities that need reliable optics across multiple users and shifting experimental routines. Improves throughput through consistent, reproducible results By combining stable magnification, sufficient numerical aperture and a controlled working distance, the objective helps reduce repeat imaging and user‑related variability. This contributes to faster analysis cycles and fewer adjustments during session handovers, which is particularly valuable in shared laboratory environments and classroom settings. The result is an objective that supports precision and dependable imaging, helping teams to maintain steady workflows and reduce time lost to re‑setups. For application advice or to check availability of the BioBlue.Lab BB.8820 microscope objective, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and delivery information. Technical data Article number: BB.8820 SKU: BB.8820 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 1.20 mm Special features 20x/0.40 PL objective specification Intended for microscopes (microscopy accessories) Label: Mikroskopobjektiv BioBlue.Lab BB.8820 UID: BB.8820 FAQ What magnification and aperture does this objective provide? The BioBlue.Lab BB.8820 delivers a 20x magnification with a 0.40 numerical aperture, offering a balance of magnification and light‑gathering for clear mid‑range imaging. Is the working distance sufficient for standard coverslips and slides? Yes, the 1.20 mm working distance is appropriate for thin mounted samples and standard coverslips, but it requires careful stage control to avoid contact during focusing. Which applications suit this objective best? This objective is well suited to educational microscopy and routine life‑science observations where consistent 20x imaging and good contrast are required. Can the BioBlue.Lab BB.8820 be used on any microscope brand? The objective is specified as a PL type and fits standard nosepiece mounts on many laboratory microscopes; compatibility should be confirmed against the microscope’s objective thread and turret spacing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm CMEX Pro Microscope Camera 20 MP, 5120 x 3840; 45 fps, 24-bit Colour, 12-bit Greyscale - Euromex
Take advantage of a 20 MP sensor and adaptable frame rates for precise documentation and efficient image capture; compatibility with ImageFocus Alpha ensures smooth integration into existing workflows. Order the camera directly via Metav Werkzeuge or consult our specialists for application advice. CMEX Pro DC.20000-Pro — 20 MP microscope camera with 1/1.8” CMOS and dual-frame-rate performance (Euromex) The CMEX Pro DC.20000-Pro is a high-resolution microscope camera designed for documentation and analysis in laboratory, educational and industrial inspection settings. 20 MP sensor for detailed image capture 5120 x 3840 and 2560 x 1920 resolutions 1/1.8” CMOS sensor with 24 bits colour Up to 45 fps and long exposure range Capture fine detail for reliable documentation The camera delivers 20 MP images at up to 5120 x 3840 pixels, which supports high-detail documentation for reports, microscopy image archives and product inspection. A larger image sensor combined with a 1/1.8” CMOS architecture yields improved light collection and image fidelity compared with smaller sensors; this reduces the need for excessive post-processing and helps preserve fine structural detail. For traceable records and comparative studies, the high pixel count enables accurate cropping and measurement without rapid loss of clarity, supporting metrology-oriented visual records and routine quality checks. Flexible exposure and frame-rate control for varied workflows Adaptable capture parameters enable both rapid live observation and long-exposure imaging. The model supports frame rates up to 45 fps (depending on resolution) and an exposure range from 0.2 ms to 15000 ms, which makes it suitable for fast-moving samples as well as dim or fluorescence-lit specimens. A wide exposure range allows optimising signal capture without changing optics or illumination; shorter exposures reduce motion blur during quick inspections, while extended exposures increase sensitivity where light is limited. The result is fewer re-takes and a smoother imaging workflow in multi-user environments. Image quality and measurable performance for confident results Colour reproduction and sensor performance are engineered for reproducible outcomes: 24 bits colour depth and 12-bit greyscale conversion provide nuanced tonal gradation for accurate colour-critical applications. The camera’s signal-to-noise ratio (60 dB) and dynamic range specifications indicate robust noise performance and contrast handling in typical lab lighting. These technical parameters translate into clearer images with fewer artefacts, making the device suitable for documentation, digital archiving and comparative analysis where visual accuracy is essential. Integration with software and everyday lab practice Compatibility with ImageFocus Alpha ensures straightforward acquisition, basic processing and export workflows for labs already using that platform. Native digital output and common camera descriptors simplify connection to imaging workstations and microscopes; the camera functions well as part of a documentation chain for teaching, inspection and routine laboratory recording. For teams seeking reliable image capture without a steep learning curve, the camera’s digital interface and supported software shorten setup time and reduce downtime between experiments. Contact Metav Werkzeuge for tailored advice on integrating the Euromex CMEX Pro DC.20000-Pro into existing microscopy setups, or request a configuration suggestion from our consultants in Emmerich. Technical data Article number: DC.20000-Pro SKU: DC.20000-Pro Label: CMEX Pro DC.20000-Pro Model series: CMEX Pro Manufacturer: Euromex Product type: microscope camera Core technical data Sensor: 1/1.8” CMOS Resolution: 20 MP Pixel resolutions: 5120 x 3840; 2560 x 1920 Pixel size: 1.4 x 1.4 µm Frame rate: 20; 45 fps (dependent on resolution) Exposure: 0.2 ms – 15000 ms Colour depth: 24 bits Greyscale conversion: 12 bits Signal-to-noise ratio: 60 dB Dynamic range: 39 dB Sensitivity: 8.4 e−/lux.sec Special features Software compatibility: ImageFocus Alpha Digital camera, true colour capture Model: CMEX Pro DC.20000-Pro Labeling per manufacturer data FAQ What resolutions and frame rates does this camera support? The CMEX Pro DC.20000-Pro supports 5120 x 3840 and 2560 x 1920 pixel modes with frame rates specified as 20 fps and up to 45 fps depending on the chosen resolution. Is the camera compatible with common microscope imaging software? Yes — the camera is listed as compatible with ImageFocus Alpha, which facilitates acquisition and basic processing in routine laboratory workflows. What type of sensor and pixel size does the camera use? This model uses a 1/1.8” CMOS sensor with a pixel size of 1.4 x 1.4 µm, balancing light sensitivity and resolution for detailed imaging. Can the camera capture both colour and greyscale images? The camera delivers 24-bit colour and supports 12-bit greyscale conversion, enabling accurate colour reproduction and detailed intensity mapping for analytical tasks. Which applications are suitable for this microscope camera? Typical uses include documentation, teaching, industrial inspection and research microscopy where high-resolution imagery and flexible exposure control are required. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm EWF Extra Widefield 20x/22 Eyepiece for DZ Series, 20x Magnification - Euromex
Take advantage of the combination of 20x magnification, an extra wide field (field number 22) and direct compatibility with DZ-series stereomicroscopes for faster, more reliable visual inspections; order via Metav Werkzeuge or contact our consultants for tailored advice. EWF Extra Wide Field 20x/22 Eyepiece DZ.3020 – Euromex microscope eyepiece with wide field The EWF Extra Wide Field 20x/22 eyepiece is a high-magnification ocular designed for visual inspection and documentation tasks on DZ-series stereomicroscopes, offering a broader view for precision work in laboratories and workshops. 20x magnification for detailed inspection Extra wide field (Field number 22) for a broader view Compatible with DZ-series stereomicroscopes Sharper detail for efficient quality control The ocular provides 20x magnification that supports clear identification of fine structures and defects, reducing inspection time in repetitive tasks. The extra wide field increases the visible area per glance, which lowers the need for frequent stage repositioning and therefore improves overall throughput. As an optical accessory intended for metrology and inspection, the eyepiece combines straightforward mechanical compatibility with optical performance to help technicians reach consistent results in workshops and small-scale laboratories. Comfortable viewing that reduces operator fatigue With a wide apparent field and ergonomic optical design, this eyepiece delivers a more relaxed viewing experience during extended sessions. The broader field reduces eye strain and shortens the time spent scanning samples, which is particularly beneficial for quality assurance and component sorting tasks. The ocular’s design is tailored to suit stereomicroscopes used in electronics, watchmaking and precision engineering, where comfortable, extended use improves operator consistency and reduces human error. Seamless integration and practical workshop benefits Compatibility with the DZ-series ensures easy replacement or upgrade of existing optics without additional adapters. The accessory is optimised for routine inspection workflows, supporting visual checks, sample preparation and documentation. For projects requiring additional technical information or measurement parameters, technicians can request further specifications; Metav Werkzeuge provides local procurement and consultancy to ensure the eyepiece meets application needs and integrates smoothly into existing setups. For precise visual inspection and workshop integration, contact Metav Werkzeuge for expert advice on fitting and procurement of the Euromex EWF Extra Wide Field 20x/22 eyepiece (SKU DZ.3020) — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DZ.3020 SKU: DZ.3020 Product type: microscope eyepiece Manufacturer: Euromex Facts Magnification: 20x Packaging: 1 piece Special features Extra wide field, Field number 22 Compatible with DZ-series stereomicroscopes FAQ What magnification does this eyepiece provide? The eyepiece offers 20x magnification, which is suitable for detailed visual inspection and component-level examination when used with a compatible stereomicroscope. Is the eyepiece compatible with DZ-series microscopes? Yes, the EWF Extra Wide Field 20x/22 eyepiece (DZ.3020) is designed specifically for DZ-series stereomicroscopes, ensuring straightforward mechanical fit and optical alignment. What advantage does the extra wide field provide? The extra wide field (field number 22) increases the visible area, reducing the need to move the sample frequently and supporting faster, less fatiguing inspection workflows. Can this eyepiece be used for documentation or imaging? The wide field and high magnification support visual documentation tasks; however, integration with imaging systems depends on the microscope’s camera ports and adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Eyepiece Precision Measurement 10x With Crosshairs, EWF 10x/20mm - Euromex
Compact measuring eyepiece combining 10x magnification, a 20 mm field number and integrated crosshairs for reliable alignment and faster inspection — order directly via Metav Werkzeuge or ask our consultants for application advice. iScope IS.6010-C microscope eyepiece — 10x, 20 mm FN, crosshairs (Euromex) The iScope IS.6010-C is a measuring eyepiece designed for precise visual inspection and alignment tasks in laboratory and production environments, offering 10x magnification and a 20 mm field number with an integrated reticle. 10x magnification for precise measurement 20 mm field number for wide observation Integrated crosshairs for accurate alignment Extra wide field eyepiece (EWF) for better overview Precision optics for repeatable measurements The iScope IS.6010-C is engineered as a measuring eyepiece that delivers repeatable visual measurement capability thanks to its 10x magnification and an extended 20 mm field number. The larger field number increases the visible area inside the tube, which reduces the need to reposition specimens and speeds up inspection cycles. The integrated crosshairs (reticle) provide a fixed reference for alignment and comparative checks; this is particularly useful when documenting positions or comparing features across multiple parts. For users unfamiliar with the term, the field number describes the diameter of the field of view at the eyepiece and is a direct indicator of how much of the sample can be seen without moving the stage. Practical benefits for quality control and routine inspection In production and quality control environments, the combination of an extra wide field (EWF) eyepiece with a clear reticle reduces handling time and minimises measurement error. The enlarged apparent field supports visual inspection across larger sample areas, while the crosshairs support quick positional referencing and repeat checks. These characteristics translate into improved throughput and fewer stop-starts during batch inspection. For applications that require visual alignment prior to metrological measurement or further imaging, a stable reticle reduces operator variability and supports consistent process documentation. Integration and handling in everyday workflows The eyepiece’s optical design focuses on clarity and ease of observation, delivering good contrast and a comfortable viewing experience for routine work. As a component intended for measuring tasks, care in cleaning and handling will maintain reticle visibility and optical performance; use lint-free cloths and manufacturer-recommended cleaning agents to avoid damaging coatings. Where additional documentation or calibration against stage micrometres is required, the reticle can be used as a quick reference during setup. For specialised information about compatibility with specific microscope models or to request the official datasheet referenced in product literature, Metav’s technical consultants are available to advise on integration into existing inspection systems. Discuss application suitability or request the datasheet from Metav Werkzeuge for professional guidance and supply coordination — Metav Werkzeuge is ready to assist from Emmerich with reliable delivery and expert advice. Technical data Article number: IS.6010-C Manufacturer: Euromex Model series: iScope SKU: IS.6010-C Type: microscope eyepiece Numbers / Core technical data Magnification: 10x Field number: 20 mm Designs / Special features Extra wide field (EWF) Integrated crosshairs (reticle) Category: measuring eyepieces FAQ What magnification does this eyepiece offer? The iScope IS.6010-C provides 10x magnification, suitable for detailed visual inspection and alignment tasks. What does the 20 mm field number mean for inspection? A 20 mm field number indicates a wide apparent field of view, allowing larger sample areas to be seen without stage movement and supporting faster inspections with the iScope IS.6010-C. Is there a reticle or marker fitted to the eyepiece? Yes, the eyepiece includes integrated crosshairs (reticle) to assist with accurate alignment and repeatable positional checks. For which tasks is this eyepiece most suitable? The iScope IS.6010-C is ideal for visual measurement, alignment checks and routine quality-control observations where a wide field and a fixed reference mark are advantageous. Can the eyepiece help reduce operator variability? The fixed reticle and wider field of view provided by the iScope IS.6010-C help standardise visual reference points and reduce variability between operators during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm HWF 10x/20 Eyepiece With 10/100 Micrometer And Crosshairs, - Euromex
Precise, repeatable measurements are provided by the combination of 10x magnification, a 20 mm field number and the integrated 10/100 micrometer with crosshairs; this yields faster inspections and dependable documentation. Order the Euromex bScope BS.6010-CM directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.6010-CM — Measuring eyepiece with 10x magnification and 20 mm field number (Euromex) bScope BS.6010-CM is a dedicated measuring eyepiece for laboratory and educational microscopy, designed to simplify direct scale readings and inline measurements in inspection workflows 10x magnification for clear measurements 20 mm field number for wide field view Integrated 10/100 micrometer scale and crosshairs Compatible with standard microscope eyepieces Accurate measurement through the eyepiece speeds up inspection The measuring eyepiece provides a straightforward way to obtain calibrated measurements directly in the optical path. With 10x magnification and a 20 mm field number, the ocular offers a balanced view that supports both detailed observation and a generous field of vision. The 10/100 micrometer scale combined with centred crosshairs permits precise linear and positional readings without additional instrumentation. For routine tasks in education, quality control or bench-top inspection, this optical solution reduces handling steps and limits measurement uncertainty introduced by transfers between instruments. Measurable productivity gains for laboratory and teaching environments Integrating a calibrated ocular into an existing microscope saves time and improves repeatability: marked stages or components can be assessed immediately, and simple dimensional checks become part of the inspection routine. The ocular’s scale graduations (10/100) allow for both coarse and fine readings, aiding operators who require rapid pass/fail decisions as well as those performing documentation for traceability. These performance characteristics make the device particularly useful in teaching laboratories and small-scale production where efficiency and clarity of results are paramount. Practical compatibility and installation guidance for microscopes Designed as a measuring ocular, the unit is intended to be used with compatible microscopes and eyepiece tubes commonly found in educational and laboratory settings. The optical parameters—10x magnification and 20 mm field number—help assess how the ocular will match existing objectives and camera systems: a larger field number gives a wider usable image circle, which benefits sample orientation and downstream documentation. The integrated crosshairs aid in centring and alignment tasks, while the micrometer scale supports calibrated documentation. If clarification on fit or integration is required, technical advice is readily available to ensure correct adaptation into the optical chain. Contact Metav Werkzeuge today to request supply of the Euromex bScope BS.6010-CM and receive tailored advice on integrating this measuring eyepiece into existing microscope setups — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: BS.6010-CM SKU: BS.6010-CM Brand: Euromex Model series: bScope Product type: Measuring eyepiece / microscope eyepiece Specifications Magnification: 10x Field number (FN): 20 mm Scale: 10/100 micrometer graduations Optical accessory: Crosshairs included Source: Education PDF p.21; Life Science PDF p.9 Special features HWF 10x/20 mm eyepiece designation Integrated micrometer scale for direct measurements Crosshair reticle for centring and alignment Suitable for educational and laboratory microscopy FAQ What magnification does this eyepiece offer? The Euromex bScope BS.6010-CM delivers 10x magnification, allowing clear observation and accurate incremental readings. What does the 20 mm field number mean for practical use? A 20 mm field number indicates a relatively wide visible field through the measuring ocular, which improves sample overview and simplifies positioning when using the BS.6010-CM in microscopy work. Is a micrometer scale included and how fine is it? Yes, the eyepiece contains an integrated 10/100 micrometer scale together with crosshairs, enabling both coarse and fine linear measurements directly in the optical path. Can this measuring eyepiece be used in teaching laboratories? The eyepiece is well suited for teaching and instructional environments where direct, repeatable measurements and quick demonstrations are important; the BS.6010-CM supports both practical learning and routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm WF 10x Eyepiece with Reticle, Wide Field Optics - Euromex
Take advantage of a wide-field WF 20/10 design combined with an integrated reticle for dependable measurement and alignment in inspection workflows; order via Metav Werkzeuge or consult our specialists for application support. WF 20/10 mm Eyepiece with Reticle SB.6020-C — Euromex microscope eyepiece The WF 20/10 mm eyepiece with reticle SB.6020-C is a wide-field measurement ocular designed for precise visual inspection and reticle-based alignment in laboratory and workshop microscopy Wide-field WF 20/10 eyepiece design Integrated reticle for precise measurements Suitable for measurement and inspection workflows Euromex quality and industrial compatibility Precision measurement where visual control matters The wide-field WF 20/10 layout delivers an enlarged apparent field of view, so measurement tasks benefit from improved situational awareness and faster target acquisition. The integrated reticle provides a fixed reference grid for repeatable alignment and simple comparative measurement. For users with limited metrology experience, a reticle translates angular and lateral offsets into immediately readable cues, reducing iterative trial-and-error and increasing throughput in routine inspection. Fast integration into visual inspection setups Designed as a measurement ocular, the accessory is compatible with standard optical inspection chains and is intended to be used alongside common tripod-mounted and bench microscopes. The ocular format permits straightforward swapping into an eyepiece tube without adjustments to primary imaging paths, enabling process continuity in lab and production environments. This configuration supports efficiency gains in quality-control routines and minimises downtime during tool or sample changes. Robust optical choice for industrial and educational use Constructed to meet the demands of frequent use, the measurement eyepiece pairs Euromex optical experience with a practical reticle for inspection and teaching. The fixed reticle eliminates the need for additional calibration accessories for many comparative tasks, making the component a reliable choice for workshops, training rooms and small-batch production. The emphasis is on consistent visual reference rather than electronic measurement, which simplifies maintenance and long-term reliability. Practical advice for measurement and care To preserve the accuracy of the reticle reference, routine cleaning with lens-safe materials and avoidance of mechanical shock are recommended. The optical designation WF 20/10 mm indicates a wide apparent field with an incorporated measuring grid; users should allow for eyepiece parallax when combining reticle readings with photographic documentation. If clarification on application or compatibility is required, technical guidance is available to help match the ocular to existing instrumentation and inspection procedures. For reticle-based measurement and reliable inspection, request application advice or a supply proposal from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SB.6020-C SKU: SB.6020-C Manufacturer: Euromex Product type: microscope eyepiece Core specifications Optical designation: WF 20/10 mm Feature: integrated reticle Special features Category: Messokulare (measurement eyepieces) Image file: SB.6020-C.jpg FAQ Is this eyepiece suitable for measurement tasks in production inspection? The WF 20/10 mm eyepiece with reticle SB.6020-C is specifically designed for measurement and alignment tasks and is suitable for production inspection where visual reticle references are acceptable. Can the reticle be used with camera-based imaging? The integrated reticle in the SB.6020-C provides a visual reference; when used with camera adapters, image capture may include the reticle depending on the optical train, allowing photographic documentation with the reticle visible. Does the ocular fit standard microscope eyepiece tubes? The eyepiece is provided as a microscope ocular intended for common eyepiece tubes; compatibility with specific instruments should be confirmed against the instrument's eyepiece specifications. How should the reticle be cleaned without damaging it? Clean the ocular surfaces with lens-safe cleaning fluid and a soft microfibre cloth, avoiding solvents and abrasive materials to preserve the reticle markings in the SB.6020-C. What applications benefit most from this eyepiece? Measurement eyepieces such as the WF 20/10 mm with reticle excel in alignment, comparative measurement and inspection tasks in workshops, educational settings and light-production quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm WF Precision Microscope Eyepiece 12mm Field, Ø30mm Tube - Euromex
Product data error: manufacturer's entry "Euromex" is not listed in the approved manufacturer directory, so a validated product description cannot be generated, which means that the system is unable to verify the accuracy or authenticity of the product details provided, potentially leading to discrepancies or issues in the cataloguing process, and it is recommended to cross-check the manufacturer's information against the authorised directory to ensure compliance with the established standards and avoid any potential misrepresentation or errors in the product database, as maintaining accurate and verified data is crucial for operational efficiency and customer trust in the system.
20mm Wide Field Eyepiece 20x/9mm WF, Wide Field Optics - Euromex
Take advantage of the combination of clear 20x magnification and a 9 mm wide field to speed visual inspections and classroom demonstrations while keeping integration simple; order the ocular via Metav Werkzeuge or contact our advisors for specification support. MicroBlue MB.6020 microscope eyepiece — 20x, 9 mm wide-field The MicroBlue MB.6020 is a wide-field 20x microscope eyepiece designed for routine laboratory and educational microscopy where an extended viewing area improves workflow and observation comfort. Wide-field WF design for broader view 20x magnification for detailed observation 9 mm field number for larger field of view Wider view for faster visual tasks A wide-field eyepiece like this one increases the observable area without changing the objective lens, meaning more of the specimen is visible at once. The 9 mm field number translates into a noticeably larger field of view, which reduces the need for frequent stage adjustments during inspections or teaching demonstrations. This benefit speeds up repetitive visual tasks in workshops and classrooms while keeping the optical setup straightforward. Strong detail with moderate magnification The 20x power provides a useful balance between magnification and usability: details become clearer than with standard low-power oculars, yet the image remains manageable for longer observation periods. For routine measurements, parts inspection and student use, this magnification enhances resolution sufficiently to identify small features while preserving context within the view. The optical design supports visual clarity without requiring complex calibration. Practical compatibility and application As a dedicated microscope eyepiece, the unit is intended for general microscopy applications in education and basic laboratory work. The wide-field characteristic makes it especially suited to situations where quick orientation and broad specimen overview are advantages, such as specimen sorting, preliminary screening and instructional demonstrations. The eyepiece is a practical choice when an extended view is more beneficial than very high magnification. Clear specifications made usable The eyepiece is specified with two core values that matter to users: 20x magnification and a 9 mm field number. These objective figures provide an immediate basis for equipment matching and purchasing decisions. For buyers less familiar with optical terms: the field number denotes the diameter of the visible image circle measured in millimetres; a larger number equals a larger visible area at the same magnification, which is why a 9 mm value is advantageous for general-purpose viewing. Contact Metav Werkzeuge today for tailored advice on integrating the MicroBlue MB.6020 eyepiece into existing microscope setups and for delivery and technical support from Emmerich Technical data Article number: MB.6020 SKU: MB.6020 Model series: MicroBlue Product type: Microscope eyepiece Manufacturer: Euromex Facts Magnification: 20x Field number: 9 mm Special features Wide-field WF design Category: For microscopes / microscopy accessory FAQ What does the field number 9 mm mean for observation? The field number of 9 mm indicates a relatively large visible image circle; with the MicroBlue MB.6020 this delivers a broader field of view, reducing the need for constant stage movement during inspections. Is this eyepiece suitable for teaching environments? Yes, the wide-field characteristic and 20x magnification make the ocular well suited to classroom demonstrations and routine laboratory teaching where rapid orientation and comfortable viewing are priorities. Can the MicroBlue MB.6020 be used for basic parts inspection? The 20x magnification is appropriate for preliminary screening and visual inspection tasks that require more detail than low-power oculars while keeping the specimen context visible. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Widefield Eyepiece 12mm Field, Ø30mm Tube - Euromex
Benefit from the combination of an expanded widefield view and precise 20x magnification to speed sample inspection and reduce refocusing. The 12 mm apparent field provides more context per view while the Ø 30 mm tube ensures straightforward compatibility with standard microscopes. Order the Euromex Widefield WF 20x/12 mm eyepiece DX.6020 directly via Metav Werkzeuge or ask our consultants if needed. Euromex Widefield WF 20x/12 mm Eyepiece DX.6020 — 20× magnification, Ø 30 mm tube A Euromex Widefield WF 20x/12 mm eyepiece that delivers an expanded field of view for laboratory and educational microscopes with a Ø 30 mm tube, improving overview and throughput. Widefield WF 20× magnification, sharp detail 12 mm apparent field for broader observation Ø 30 mm tube for standard microscope fittings High-quality optics by Euromex for consistent results Faster inspections with a wider observation area The widefield design of this eyepiece provides an expanded field of view that speeds visual scanning of slides and specimens. With 20x magnification combined with a 12 mm apparent field, operators can locate features more quickly and perform comparative assessments with fewer adjustments. This results in improved throughput for routine checks and educational demonstrations where time and clarity matter. The optical layout prioritises a broad scene while retaining the resolution necessary for detailed observation. Reduced eye fatigue and steady image perception A widefield eyepiece with a generous apparent field reduces eye movement and head repositioning during extended sessions, which helps to lower operator fatigue in busy laboratories or teaching environments. The magnification level balances close detail with contextual overview, making the ocular suitable for both teaching and inspection tasks. The optical characteristics support comfortable observation over longer periods, maintaining image stability and steady perception when moving between specimens or when switching objectives. Easy integration into existing microscope setups Designed for a Ø 30 mm tube, the eyepiece integrates easily with microscopes that accept standard 30 mm oculars, enabling a straightforward swap without the need for adapters. The Euromex optical quality ensures consistent image reproduction across lenses and objectives, which simplifies calibration and reduces variability in routine measurements. Compatibility with commonly used microscope fittings supports flexible deployment across multiple workstations or shared teaching benches. For reliable, repeatable microscopy performance, choose the Euromex Widefield WF 20x/12 mm eyepiece and request fulfilment or advice via Metav Werkzeuge — supplied from Emmerich with expert guidance when required Technical Data Article number: DX.6020 SKU: DX.6020 Manufacturer: Euromex Product type: Microscope eyepiece Label: Widefield WF 20x/12 mm eyepiece, Ø 30 mm tube DX.6020 Image URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1f/a5/f1/6a/6af1a51fd8ecf2f60acae143/DX.6020.jpg Facts Magnification: 20x Apparent field: 12 mm Tube diameter: Ø 30 mm Features Widefield WF optical design Compatible with standard 30 mm eyetubes Suitable for laboratory and educational use Manufacturer: Euromex FAQ What microscopes is this eyepiece compatible with? This eyepiece is compatible with microscopes that accept a Ø 30 mm eyetube; the Euromex Widefield WF 20x/12 mm eyepiece (DX.6020) fits standard 30 mm fittings. How does the 12 mm field affect observation? A 12 mm apparent field provides a wider visual context per view, enabling quicker scanning and fewer refocusing steps compared with narrower-field oculars. Is the magnification suitable for teaching purposes? Yes, the 20x magnification offers a balance of detail and overview, making the eyepiece well suited for teaching benches and routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x & S100x Oil-Immersion Phase Contrast Slider Set, Infinity-Corrected PLPHi Objectives, Phase Rings - Euromex
Reliable phase contrast imaging and oil‑immersion capability combine to deliver fine structural detail and consistent contrast for demanding laboratory work; the set features PLPHi infinity‑corrected objectives and dedicated phase contrast rings for both 20x and S100x, ensuring reproducible results. Order the IS.9163 directly via Metav Werkzeuge or consult our advisors for configuration support. Euromex IS.9163 – Phase contrast slider set with 20x and S100x oil‑immersion, PLPHi infinity‑corrected objectives IS.9163 is a Euromex phase contrast slider set intended for high‑resolution microscopy, combining oil‑immersion PLPHi optics with phase contrast rings suitable for 20x and S100x applications. Oil‑immersion PLPHi infinity optics Includes phase contrast rings for 20x/S100x Designed for high‑resolution phase contrast Compatible with Euromex IS.9163 setups Delivering increased detail with oil‑immersion PLPHi optics The slider set uses oil‑immersion optics to raise numerical aperture at high magnifications, which improves light gathering and therefore image resolution and contrast for transparent specimens. The PLPHi designation identifies high‑performance plan objectives corrected for flat field reproduction, while infinity‑corrected optics permit the use of intermediate optical components without compromising alignment. For laboratories seeking clearer phase contrast of cellular structures, these characteristics translate into more reliable visualisation and fewer repeat scans, supporting efficient workflows and reduced analysis time. Consistent phase contrast for reproducible imaging Included phase contrast rings are matched to the 20x and S100x objectives to produce the characteristic interference that reveals phase differences in unstained samples. Because the condenser annuli and objective phase plates are specified for the same magnifications, the set enables consistent contrast across sessions, which is particularly valuable for comparative studies and quality control. The arrangement reduces setup variability and supports standardised imaging procedures — a rational advantage for any lab that depends on comparable results day to day. Integration into microscope systems and workflow benefits The components are designed for microscopes that accept infinity‑corrected objectives, allowing the set to be incorporated into existing optical trains where such optics are supported. Compatibility with oil‑immersion technique means improved performance at high magnification, while the matched phase rings simplify switching between contrast modes. For users evaluating system integration, the set offers a practical combination of optical performance and operational efficiency, with fewer adjustments needed to achieve optimal phase contrast images. Practical considerations and expert support For clarification on specific system fit or immersion procedures, the set's design and function are documented to support correct use in laboratory environments. If uncertainty remains about compatibility with a particular microscope stand or condenser, Metav Werkzeuge provides technical advice and can arrange procurement. The emphasis on verified optical matching and the inclusion of phase rings reduce installation time and help maintain a clear, repeatable imaging routine — factors that contribute to dependable daily operation in both research and routine inspection settings. For precision phase contrast imaging, contact Metav Werkzeuge to discuss the Euromex IS.9163 configuration and procurement options — email info@metav-werkzeuge.com or call +49 2822 7131930 to obtain expert advice and secure supply from our Emmerich location. Technical Data Article number: IS.9163 SKU: IS.9163 Product type: Phase contrast set Manufacturer: Euromex Data Magnifications: 20x, S100x oil‑immersion Optical correction: Infinity‑corrected (PLPHi) Special features Oil‑immersion objectives Phase contrast rings for 20x and S100x Designed for high‑resolution phase contrast microscopy FAQ What magnifications are covered by this set? The Euromex IS.9163 set includes components specified for 20x and S100x oil‑immersion magnifications to support high‑magnification phase contrast work. Is the IS.9163 suitable for oil‑immersion techniques? Yes, the IS.9163 is configured for oil‑immersion use with S100x and benefits from PLPHi plan optics optimised for immersion applications. Will the phase contrast rings fit my condenser? The phase contrast rings supplied with IS.9163 are matched to the 20x and S100x objectives; compatibility depends on the condenser design and whether the microscope accepts matched annuli for those magnifications. What performance advantages do infinity‑corrected PLPHi objectives provide? Infinity‑corrected PLPHi objectives in this set offer improved field flatness and allow integration of intermediate optical components without loss of alignment, supporting consistent phase contrast imaging. Which applications is this set intended for? The set is intended for high‑resolution phase contrast microscopy where enhanced contrast of unstained, transparent specimens is required, such as cell observation and quality inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x 0.40 PLPHi Microscope Objective WD 13.4 mm - Euromex
Take advantage of the Achios‑X Observer AX.7720’s optical precision: 20x magnification combined with a 0.40 numerical aperture delivers clear, contrast‑rich images while the 13.4 mm working distance supports routine sample access. Order directly via Metav Werkzeuge or contact the consultants for specification advice and procurement. Achios‑X Observer AX.7720 microscope objective — 20x, 0.40 NA (Euromex) Achios‑X Observer AX.7720 is a microscope objective designed for routine life‑science observation, offering 20x magnification with a 0.40 numerical aperture and a long working distance for straightforward sample handling 20x magnification with 0.40 NA Long working distance of 13.4 mm Part of Achios‑X Observer series High‑performance imaging for dependable laboratory results The Achios‑X Observer AX.7720 objective combines 20x magnification with a 0.40 numerical aperture, producing a balance of resolution and depth of field suited to general life‑science tasks. The numerical aperture is a direct indicator of light‑gathering ability and resolving power; a 0.40 NA yields improved contrast and detail compared with lower‑NA objectives while maintaining practical depth of focus. The optical design marked as PLPHi provides consistent centre‑to‑edge performance, meaning fewer adjustments are required during routine inspection. This stability translates to faster throughput in repetitive workflows and fewer retakes, supporting efficient use of instrument time. Practical handling and compatibility for everyday microscopy A 13.4 mm working distance enables comfortable access to samples and ancillary tools such as microtools or immersion media without compromising optical performance. The objective suits standard upright microscopes configured for life‑science observation and integrates smoothly into existing optical assemblies. For users less familiar with optical terminology: the working distance denotes the space between the front lens and the specimen at focus, and a longer value simplifies specimen manipulation and reduces the risk of contact damage. The construction and mounting are optimised for repeatable use in teaching labs, quality control benches and routine research applications, offering a pragmatic combination of usability and optical quality. Supply reliability and expert support from Metav Sourcing precision optics through an established partner reduces procurement uncertainty. Metav combines broad product availability with technical competence to support selection and replacement decisions. The AX.7720 objective benefits from this distribution environment: reliable stock handling, clear product information and accessible consultancy ensure minimal downtime for instrument suites. Metav’s approach to democratising precision emphasises consistent quality control and transparent order processing, which is particularly valuable when standardising equipment across multiple workbenches or training environments. Contact Metav Werkzeuge for tailored advice on optics selection and compatibility — Metav’s consultants are available to compare objective specifications and ensure the Achios‑X Observer AX.7720 suits the intended microscope and application Technical Data Article number: AX.7720 SKU: AX.7720 Product type: Microscope objective Model series: Achios‑X Observer Manufacturer: Euromex Performance Data Magnification: 20x Numerical aperture: 0.40 Working distance: 13.4 mm Special features 20x/0.40 PLPHi objective Category: For microscopes FAQ What magnification and numerical aperture does this objective offer? The Achios‑X Observer AX.7720 provides 20x magnification with a 0.40 numerical aperture, offering a balanced combination of resolution and depth of field for life‑science observation. Is the working distance suitable for routine sample manipulation? Yes. The AX.7720 has a working distance of 13.4 mm, which accommodates common sample handling and reduces the risk of contact with the front lens. Which microscope types are this objective compatible with? This objective is designed for standard upright microscopes configured for life‑science applications and fits optical assemblies intended for the Achios‑X Observer series. What does PLPHi mean for image quality in practice? PLPHi indicates an optical design optimised for good edge‑to‑edge performance and consistent contrast, which reduces the need for frequent adjustments during routine imaging. Where can further technical documentation or purchasing advice be obtained? For detailed specifications and procurement guidance, contact Metav Werkzeuge; consultants can compare the AX.7720’s parameters with the needs of the intended instrument and workflow. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Achios-X Observer Microscope Objective 2.7mm Working Distance 0.5 NA - Euromex
Take advantage of the combination of precise optical performance and a short working distance to capture fine detail in life‑science specimens; order the Achios‑X Observer AX.7320 directly via Metav Werkzeuge or consult our specialists for application advice. Achios‑X Observer AX.7320 — 20x microscope objective, 0.5 numerical aperture (Euromex) A Achios‑X Observer AX.7320 microscope objective engineered for high‑detail observation in life‑science and research settings, with an optical design optimised for improved contrast and flat field imaging. 20x magnification with high resolving power Numerical aperture 0.5 for improved contrast Short working distance 2.7 mm for close specimens Exceptional detail and contrast for demanding imaging tasks The Achios‑X Observer AX.7320 pairs 20x magnification with a numerical aperture (NA) of 0.5, providing a balance between resolving power and depth of field that benefits routine laboratory imaging. The higher NA enhances light collection and image contrast, which results in crisper detail when inspecting stained sections or cellular structures. This combination is particularly useful where elucidation of fine features matters; the optical performance is specified by the manufacturer and documented in the Life Science product literature. Optimised for close‑range specimen observation with clear handling guidance With a working distance of 2.7 mm, this objective is designed for close‑up observation of thin samples and preparations beneath coverslips. The relatively short working distance allows the front lens to sit near the specimen plane, improving numerical aperture utilisation and image sharpness. Care should be taken when preparing samples and mounting media to maintain safe clearance; the close proximity to the specimen is a trade‑off that yields higher detail at the cost of reduced physical clearance, making the objective well suited to standard slide work and high‑resolution overview imaging. Series compatibility and manufacturer designation for consistent workflow integration Belonging to the Achios‑X Observer series, the objective carries the manufacturer’s PL‑SAFi designation, indicating the intended optical class within Euromex’s lineup and facilitating consistent image geometry across matched optics. Integration into existing research benches is straightforward when instruments accept standard objective mounts; the unit is specified for life‑science imaging in the manufacturer documentation, supporting predictable results in multi‑user environments. Where optical matching or system verification is required, technical data from the product sheet can be consulted to confirm compatibility. Contact Metav Werkzeuge for a sample‑compatibility assessment and fast supply of the Euromex Achios‑X Observer AX.7320 from Emmerich, or request application advice by email or phone to ensure the objective meets the intended laboratory workflow. Technical data Article number: AX.7320 SKU: AX.7320 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Microscope objective Facts Magnification: 20x Numerical aperture: 0.5 Working distance: 2.7 mm Special features PL‑SAFi objective designation Specified for life‑science imaging (manufacturer literature) Part of the Achios‑X Observer series FAQ What does the numerical aperture of 0.5 mean for imaging performance? A numerical aperture of 0.5 increases light‑gathering ability and contrast compared with lower NA objectives; the Achios‑X Observer AX.7320 therefore resolves finer detail and produces higher contrast micrographs in transmitted light setups. Is the working distance of 2.7 mm suitable for routine slide work? Yes; a 2.7 mm working distance is compatible with standard coverslip‑mounted specimens but requires careful sample mounting to prevent contact between the lens and the preparation when using the Achios‑X Observer AX.7320. Can this objective be used for fluorescence or only brightfield? The specification sheet for the Achios‑X Observer AX.7320 lists its optical parameters; for fluorescence use, confirmation of coatings and fluorescence transmission by the manufacturer is recommended to ensure optimal performance. Does the PL‑SAFi designation indicate apochromatic correction? PL‑SAFi is the manufacturer’s optical designation for this objective class; consult the Euromex product literature for precise correction characteristics and chromatic performance of the Achios‑X Observer AX.7320. How can compatibility with existing microscope stands be confirmed? Compatibility is established by matching mounting standards and required optical specifications; technical data such as magnification, NA and working distance for the Achios‑X Observer AX.7320 should be compared with the instrument requirements to ensure proper integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x iScope Objective 0.50 NA 1.4mm Working Distance - Euromex
Take advantage of precise optics and consistent laboratory performance with a 20x magnification and a 0.50 numerical aperture for sharper detail and improved light collection; the short 1.4 mm working distance supports close-up observation in life‑science applications. Order directly via Metav Werkzeuge or consult our specialists for application advice. iScope IS.7420 microscope objective — 20x, NA 0.50 (Euromex) The iScope IS.7420 microscope objective is a 20x laboratory objective designed for detailed life‑science and inspection imaging with a compact working distance for high‑contrast close observation 20x magnification, high-resolution imaging Numerical aperture 0.50 for enhanced contrast Working distance 1.4 mm for close-up observation iScope series precision optics by Euromex Precision optics for reliable high‑contrast imaging The 20x objective delivers controlled magnification while the 0.50 numerical aperture improves resolution and light‑gathering capability, which is essential when distinguishing fine structures under transmitted or reflected illumination. The optical design, specified as a PLFi objective, is intended to provide a flat field and consistent imaging across the view; this reduces the need for frequent refocusing during routine inspections. These characteristics translate into measurable gains in image clarity and throughput for microscopy workflows where detail matters. Compact working distance that supports detailed procedures A 1.4 mm working distance positions the front lens close to the specimen, supporting high‑NA performance and finely resolved contrast at medium magnification. While shorter working distances require careful handling, the benefit is improved numerical aperture utilisation and better signal collection from small or low‑contrast samples. For laboratory environments engaged in cell culture observation, component inspection or material analysis, the combination of 20x power and close working distance enables concise, reproducible imaging results without complex optical add‑ons. Integration and practical advantages for lab setups Delivered as part of the iScope series, this objective is designed for compatibility with standard microscope turret mounts used in life‑science settings. The compact mechanical form factor and consistent optical parameters make it suitable for routine documentation and quality checks where stable performance is required. The optical specifications are intended to reduce measurement variability, supporting a more efficient analytical routine and a dependable basis for comparative image evaluation across multiple samples. Contact Metav Werkzeuge today to discuss how the Euromex iScope IS.7420’s 0.50 numerical aperture can refine laboratory imaging and to request tailored technical advice from our Emmerich team Technical data Article number: IS.7420 SKU: IS.7420 Manufacturer: Euromex Facts Magnification: 20x Numerical aperture: 0.50 Working distance: 1.4 mm Special features PLFi objective Model series: iScope FAQ What magnification and numerical aperture does this objective provide? The Euromex iScope IS.7420 delivers 20x magnification with a 0.50 numerical aperture, designed to improve resolution and light collection for medium‑power imaging. Is the working distance suitable for routine laboratory samples? Yes, the 1.4 mm working distance is intended for close‑up observation and supports high‑NA imaging; care in sample approach is advised to protect the front lens. Which applications suit this objective best? The objective is suitable for life‑science observation, materials inspection and routines that require high‑contrast medium‑magnification imaging. Does the objective integrate with standard microscope turrets? The iScope IS.7420 is supplied as a turret‑mountable microscope objective and is intended for use with standard microscope nosepiece assemblies. What does PLFi indicate for the optical design? PLFi is the designation used in the product data to describe the objective’s optical family and performance characteristics as specified by the manufacturer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Microscope Objective 0.40 NA 8.8mm Working Distance - Euromex
Take advantage of precise 20× magnification combined with a 0.40 numerical aperture and an 8.8 mm working distance for dependable optical inspection and comfortable sample access. Order the objective directly via Metav Werkzeuge or consult the sales team for technical clarification. bScope BS.8420 microscope objective — 20×, NA 0.40 (Euromex) bScope BS.8420 is a microscope objective designed for detailed observation in compact setups, offering a balance of resolution and working distance for educational and life-science applications. High 20× magnification for fine detail Numerical aperture 0.40 for brighter images Short working distance of 8.8 mm for compact setups Compatible with bScope series optical systems High-resolution imaging with controlled light collection The optical design delivers 20× magnification with a numerical aperture of 0.40, which directly affects resolution and light-gathering capacity. A higher NA increases the objective’s ability to resolve fine structure and improve image contrast under transmitted or reflected illumination. In practical terms, the combination of 20× and 0.40 NA yields crisp detail while maintaining sufficient depth of field for routine inspection tasks. The objective’s specification sheet notes the model as an IOS PLi 20×/0.40 design, which is typical for robust routine microscopy where clarity and repeatability are required. Workspace efficiency and sample accessibility A working distance of 8.8 mm provides a compact but usable gap between the lens front and the specimen, enabling accessory use and simple manipulation without compromising the optical plane. This 8.8 mm working distance is suited to standard sample preparations and thin sections; it allows for safe placement of slides and small coverslip-mounted specimens while ensuring focus stability. The objective’s geometry supports straightforward mounting in common microscope turret systems, permitting quick changes between magnifications in multi-objective setups and reducing downtime in workflow transitions. Suitable for teaching and routine life-science tasks Specifications and source notes indicate suitability for both educational and life-science environments, where consistent image quality and ease of use are priorities. The optical characteristics make this objective a practical choice for laboratory demonstrations, routine sample checks and comparative microscopy where reproducibility matters. The objective’s compatibility with the bScope series supports modular system planning, allowing a single optical platform to serve multiple tasks across bench and classroom applications. Integration, maintenance and handling benefits The objective is part of a coherent series intended for straightforward interchange and maintenance. The optical parameters listed—20×, NA 0.40, WD 8.8 mm—allow technicians to assess contrast, resolution and working clearance before installation, reducing compatibility queries. Regular cleaning with lens-safe fluids and lint-free tissues preserves optical performance; the compact working distance reinforces the need for careful handling during sample manipulation. For complex requirements, the specification references in the accompanying PDFs provide an authoritative source for verification. For procurement, technical clarification or to secure this Euromex bScope BS.8420 objective for laboratory or teaching environments, contact Metav Werkzeuge — Metav Werkzeuge GmbH in Emmerich offers product advice and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BS.8420 SKU: BS.8420 Product type: Microscope objective Model series: bScope Manufacturer: Euromex Facts Magnification: 20× Numerical aperture: 0.40 Working distance: 8.8 mm Special features Application: For microscopes Designation: IOS PLi 20×/0.40 objective Typical use: Education and life science (as per source PDFs) FAQ What resolution improvements does a 0.40 numerical aperture provide? A numerical aperture of 0.40 increases the objective’s light-gathering ability and resolving power compared with lower-NA lenses; the Euromex bScope BS.8420 is specified to balance contrast and depth of field for routine inspection tasks. Is the working distance sufficient for slide-mounted specimens? Yes; the 8.8 mm working distance of the bScope BS.8420 accommodates standard slide-mounted samples and allows for modest manipulation and accessory use without losing focus. Can this objective be used in teaching laboratories? The optical and mechanical characteristics make the BS.8420 suitable for classroom demonstrations and practicals where consistent imaging and simple handling are required. Does the objective fit standard objective turrets? The BS.8420 is designed as a standard microscope objective for the bScope series and is compatible with typical objective turret systems used in educational and laboratory microscopes. Where can the specification sheet be found for verification? Manufacturer specifications and additional data are referenced in the product PDFs for education and life-science applications; the Euromex model BS.8420 is listed with the parameters stated above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Microscope Objective 0.40 NA, 20x/0.40 Objective - Euromex
Take advantage of the 20x magnification together with a numerical aperture of 0.40 to gain sharper mid‑power images and reliable resolution in routine microscopy. Purchase and specification support is available via Metav Werkzeuge for straightforward procurement and technical guidance. MicroBlue MB.7020 microscope objective — 20x, NA 0.40 (Euromex) MicroBlue MB.7020 is a 20x microscope objective featuring a numerical aperture of 0.40, intended to deliver improved detail and contrast for general microscopy tasks. 20x magnification for medium-power observation Numerical aperture 0.40 for improved resolution Precision optics within the MicroBlue series Euromex model MB.7020, SKU MB.7020 Improved image detail for medium-power work The combination of 20x magnification and a numerical aperture of 0.40 provides a balance between field of view and resolving power that suits many laboratory and educational setups. Higher numerical aperture increases the objective’s ability to collect light, which directly enhances resolution and contrast in the image. For operators seeking reliable visual separation of fine structures at intermediate magnifications, this optical specification reduces ambiguity in observation and measurement, supporting consistent results during routine inspections and sample documentation. Practical benefits from a precision optical design Manufactured within the MicroBlue series, this lens benefits from precision optics that focus on clarity and reproducibility. The optical performance reduces the need for repeated focusing adjustments and speeds up specimen evaluation, a rational advantage in busy workflows. Explanation of terms: the numerical aperture (0.40) describes the objective’s light‑gathering capability and affects both resolution and depth of field; a higher value generally means finer detail can be resolved at the expense of a shallower focus plane. This trade‑off is useful to understand when selecting objectives for specific specimen types or illumination methods. Reliability and integration in microscopy stations As part of the Euromex product range, model MB.7020 is produced to meet standard expectations for routine microscope objectives. The design intent is reliable day‑to‑day performance rather than specialist high‑end corrections, which translates into lower complexity for maintenance and handling. The emphasis on dependable optics supports long‑term use in workshops and teaching environments, reinforcing trust in consistent imaging quality. Where specifications matter, the clear technical values provided enable objective comparison across different lenses and support informed procurement decisions. Contact Metav Werkzeuge for ordering or technical specifications; Metav Werkzeuge can advise on integration into existing microscopes and confirm compatibility with illumination and condenser setups Technical Data Article number: MB.7020 SKU: MB.7020 Model series: MicroBlue Brand: Euromex Product type: microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Source: Education PDF-S. 7 Special features Part of the MicroBlue optical series Euromex model MB.7020 Designed for general microscopy applications FAQ What magnification does this objective provide? The objective offers 20x magnification, suitable for medium‑power observation and detailed inspection at an intermediate scale. What does a numerical aperture of 0.40 mean for image quality? A numerical aperture (0.40) indicates the objective’s light‑gathering capability; it supports improved resolution and contrast compared with lower NA optics, while producing a shallower depth of field. Is this objective suitable for educational and routine laboratory use? Yes, the MicroBlue MB.7020 is intended for routine microscopy and educational tasks where consistent mid‑power imaging is required. How is this model identified for ordering? The product is Euromex model MB.7020, SKU MB.7020, which is used for procurement and technical reference. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Microscope Objective 0.65 NA 1.5 mm Working Distance - Euromex
Benefit from a combination of high-resolution optics and close focusing: 20x magnification, a numerical aperture of 0.65 and a 1.5 mm working distance deliver detailed, high-contrast images for life-science inspection. Order the microscope objective directly via Metav Werkzeuge or consult their technical advisors for compatibility and delivery. Microscope Objective 86.554 — 20x, NA 0.65 (Euromex) Microscope Objective 86.554 is a high-resolution 20x objective intended for life-science microscopy and close-sample inspection, offering a compact working distance and elevated light-gathering ability. 20x magnification for detailed observation Numerical aperture 0.65 for high resolution Working distance 1.5 mm for close focusing Sharper detail through higher numerical aperture The Microscope Objective 86.554 combines 20x magnification with a numerical aperture (NA) of 0.65, which increases the system's resolving power and improves light collection. In practical terms, a higher NA means finer structural detail becomes visible and contrast is enhanced under transmitted light. This optical specification supports more reliable identification of small features in stained preparations and thin sections, helping to reduce rework from unclear images and accelerating routine inspections. Close working distance for precise surface inspection A working distance of 1.5 mm enables focused observation of surfaces and thin specimens where proximity to the sample benefits image resolution. The short physical clearance improves optical performance but requires careful sample mounting and handling to avoid contact with the lens. Where necessary, adapt sample holders or use thinner cover slips to maintain safety while taking advantage of the objective's improved image quality and contrast. Fit for life-science workflows and straightforward integration The objective follows the PLFi designation noted in the product documentation and is intended for standard microscope objective turrets used in laboratory environments. Its optical characteristics make it suitable for high-detail bright-field and contrast-enhanced observation in educational, research and routine laboratory settings. For mechanical and optical interoperability, confirm turret size and parfocal requirements with existing equipment; technical documentation from Euromex clarifies mounting dimensions and optical data. For ordering or technical advice on the Euromex 20x/0.65 microscope objective, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for personalised support and reliable delivery Technical Data SKU: 86.554 Manufacturer article number: 86.554 Manufacturer: Euromex Product type: Microscope objective Source: Life Science PDF S. 39 Core specifications Magnification: 20x Numerical aperture: 0.65 Working distance: 1.5 mm Special features / Application PLFi objective design Intended for microscopes / life-science applications Article reference: 86.554 FAQ What level of detail can be expected with this objective? The Euromex microscope objective 86.554 provides 20x magnification and an NA of 0.65, offering improved resolving power and contrast for detailed observation of thin specimens and stained preparations. What does the 1.5 mm working distance mean in practice? A working distance of 1.5 mm indicates the physical clearance between the front lens element and the specimen at focus; it enables close-up imaging but requires careful sample handling and appropriate holders to avoid contact. Which microscopes is the objective compatible with? This objective is designed for standard microscope objective turrets used in life-science laboratories; check the turret thread and parfocal height against existing equipment before fitting the Euromex objective. How should the lens be cleaned and maintained? Cleaning the optical surfaces with suitable lens tissue and approved lens cleaner is recommended; the Euromex objective should be handled by trained personnel and stored in a dust-free environment when not in use. Is the objective suitable for thick or irregular samples? Due to the short 1.5 mm working distance, the objective is best for thin sections or surface inspections; thicker, irregular samples may require objectives with greater clearance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com