20x Objective 0.40 NA 1.85 mm Working Distance, Microscope Objective - Euromex
High-precision 20x magnification combined with a 0.40 numerical aperture and a 1.85 mm working distance delivers detailed imaging for close-focus applications; order the Euromex bScope BS.7120 directly via Metav Werkzeuge or request consultation for specification matching. Euromex bScope BS.7120 — Microscope objective with 20x magnification and 0.40 NA The Euromex bScope BS.7120 is a microscope objective engineered for detailed specimen observation in educational and life‑science environments at short working distances 20x magnification for detailed imaging Numerical aperture 0.40 for contrast and resolution 1.85 mm working distance for close-focus applications Compatible with bScope series optical system Exceptional clarity where small structures matter The objective delivers high-resolution imaging through its 20x power and 0.40 numerical aperture, parameters that directly influence resolving power and light collection. The numerical aperture quantifies the lens's ability to gather light and thus to distinguish fine detail; a 0.40 value represents a balance between resolution and depth of field suitable for routine microscopic analysis. Given the 1.85 mm working distance, close-focus observation of thin sections and small specimens is enabled while preserving image sharpness. These optical specifications are particularly advantageous when fine structural contrast must be resolved without recourse to higher‑magnification objectives that require more complex alignment. Designed for straightforward integration in teaching and lab setups As part of the bScope series, the objective is intended to integrate into established optical systems used in teaching and basic life‑science laboratories. The optical design supports stable image formation and repeatable results across routine sessions, which reduces set‑up time and increases throughput in practical classes or standard laboratory workflows. Documentation for the product appears in the manufacturer's education and life‑science references, underlining suitability for instructional use and everyday laboratory tasks where dependable optical performance is required. Clear specification data to simplify selection and inventory Key technical values are provided explicitly for quick verification: 20x magnification, 0.40 numerical aperture and a 1.85 mm working distance are listed in the product literature. Identification by SKU BS.7120 and series designation helps with stock management and ordering processes. For projects requiring confirmation of mechanical fit or integration with a specific microscope stand, the published numerical data allow a rapid compatibility assessment and reduce the need for trial‑and‑error adjustments. For precise short‑working‑distance imaging, contact Metav Werkzeuge for technical advice and access to original datasheets for the Euromex bScope BS.7120: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: BS.7120 SKU: BS.7120 Manufacturer: Euromex Model series: bScope Product type: Microscope objective Label: Microscope objective bScope BS.7120 Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 1.85 mm Source reference: Education PDF p.21; Life Science PDF p.9 Special features EPL objective designation (manufacturer data) Designed for short working‑distance observation Part of bScope series optical components FAQ What magnification does this objective provide? The Euromex bScope BS.7120 provides 20x magnification for detailed specimen observation. What is the numerical aperture and why is it relevant? The objective has a 0.40 numerical aperture; this determines light‑gathering capacity and resolution, so a 0.40 NA offers a practical balance between clarity and depth of field. How close can the objective focus to the specimen? The working distance is 1.85 mm, which permits close focusing suitable for thin sections and small samples where near‑field detail is required. Is this objective intended for educational use? Yes; documentation references place the objective in education and life‑science contexts, making it appropriate for teaching labs and routine laboratory applications. How is the product identified for ordering and inventory? Identification is simplified by the SKU BS.7120 and the bScope series designation for consistent stock control. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Objective Microscope Objective 20x/0.40 NA, WD 2.61 mm - Euromex
The provided product data names the manufacturer as "Euromex", but this brand does not appear in the mandatory manufacturer directory required for generation of a compliant product description. Because a valid match from the approved list is compulsory, a complete, production-ready description cannot be created from the current information. Please supply either a manufacturer entry that matches one of the approved providers or provide corrected manufacturer details from the supplied overview. Without accurate and verified manufacturer information, it is impossible to proceed with creating a description that adheres to the necessary compliance standards. Once the manufacturer can be matched to the approved list, a full, structured description in British English meeting all formatting and compliance requirements will be produced immediately.
20x WF Eyepiece 11 mm Field Number, BioBlue.Lab - Euromex
Take advantage of the precise 20x magnification and the wide 11 mm field number for efficient visual inspection and documentation. The WF design delivers a larger usable image area while maintaining optical clarity, supporting faster analysis and fewer retakes. Order via Metav Werkzeuge or consult our specialists for application advice. BioBlue.Lab BB.6020 microscope eyepiece — WF 20x/11 mm (Euromex) A BioBlue.Lab BB.6020 microscope eyepiece is designed for laboratory and inspection microscopy, offering high magnification and a wide field number for detailed sample observation Wide-field WF design for extended view 20x magnification for detailed observation Field number 11 mm for larger field of view See finer detail without compromise The 20x power of this eyepiece provides substantial enlargement for close inspection of structures and fine features, making it suitable for visual tasks that require enhanced resolution. By combining higher magnification with a wide-field optical design, the ocular supports clearer interpretation of small details while keeping the image steady. This reduces the need for frequent re-positioning and speeds up inspection workflows, an advantage in both teaching and quality-control environments. The construction focuses on optical performance to ensure observations are reproducible and reliable. Work faster with a larger usable image area A field number of 11 mm means a visibly broader field of view, which allows operators to observe more of the specimen at once. This wider apparent view reduces the time spent scanning and repositioning samples during routine checks, improving throughput in repetitive tasks. For applications where context around a detail matters—such as materials inspection or sample sorting—the expanded view aids quicker decision-making and fewer interruptions, supporting leaner processes in the lab or workshop. Practical advantages for laboratories and microscopy setups The WF designation (wide-field) indicates the eyepiece is optimised for comfortable observation under elevated magnification. For users transitioning from lower-power oculars, the combination of 20x and 11 mm balances magnification with a usable image circle, minimising eye strain during extended sessions. Optical terminology such as "field number" describes the diameter of the viewable image in millimetres; a larger number directly correlates with a wider visible area through the eyepiece. This clarification helps purchasers assess whether the ocular fits their inspection and documentation needs without requiring specialised optical knowledge. For tailored advice on the Euromex BioBlue.Lab BB.6020 and to arrange supply from our Emmerich warehouse, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with technical suitability and delivery options. Technical data Article number: BB.6020 SKU: BB.6020 Brand: Euromex Model series: BioBlue.Lab Product type: Microscope eyepiece Core data Magnification: 20x Field number: 11 mm Special features WF wide-field eyepiece For microscopes Source: Education PDF-S. 16; Life Science PDF-S. 12 FAQ What does the field number 11 mm mean in practice? A field number of 11 mm denotes the diameter of the visible image circle seen through the eyepiece; the larger number produces a broader apparent field, so the BB.6020 presents more of the specimen without moving the slide. Is 20x magnification suitable for inspection tasks and teaching? Yes, the 20x power of the BB.6020 is designed for detailed observation and is often used where higher resolution is needed; it complements lower-power oculars for stepwise examination and documentation. What does the WF designation indicate about the eyepiece? WF indicates a wide-field design; the WF 20x/11 mm eyepiece offers a larger apparent field than a standard ocular at the same magnification, improving situational awareness during inspection. Can the eyepiece improve workflow speed in quality-control settings? The combination of 20x magnification and an 11 mm field number reduces the need for constant repositioning and supports more efficient scanning, which can speed up repetitive inspection tasks. How should the eyepiece be handled to preserve optical quality? Handle the ocular by its barrel, avoid touching lens surfaces, and store in a dust-free case; regular cleaning with suitable lens tissue maintains the performance of the BB.6020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x WF Eyepiece 11mm Field Number, 20x Magnification - Euromex
Secure accurate routine inspections with 20× magnification and a generous 11 mm field number for faster sample evaluation and reduced repositioning. Combine optical consistency and wide-field observation for efficient microscopy workflows; purchase via Metav Werkzeuge or consult their specialists for tailored advice. bScope BS.6020 microscope eyepiece — 20× magnification, 11 mm field number The bScope BS.6020 is a wide-field microscope eyepiece engineered to deliver clear, high-contrast observation for education, laboratory routines and quality checks. Wide-field WF 20×/11 mm optics 11 mm field number for larger view Precisely defined magnification 20× Part of the bScope line by Euromex Faster inspections with a wider field of view A generous 11 mm field number means a noticeably broader visible area compared with standard eyepieces, reducing the need for constant stage movement during scans. The wide-field (WF) design increases situational awareness when examining extended specimens or performing routine checks, which shortens inspection times and improves throughput. Operators benefit from clearer peripheral detail while maintaining a familiar 20× working magnification, making visual comparison and documentation more efficient without sacrificing image quality. Consistent optical performance for repeatable results Defined magnification and aprecision** optical design promote repeatability across measurements and visual assessments. The stable magnification characteristic supports consistent imaging when creating records or comparing samples over time, which is crucial in educational settings and standardised laboratory procedures. The WF optics assist in maintaining even illumination and contrast across the field, so routine observations remain dependable and simple to reproduce for reporting and quality control. Robust handling and straightforward workflow integration Designed as part of a series intended for regular use, the eyepiece offers practical robustness for workshops and teaching labs alike. The construction emphasises straightforward handling and maintenance, contributing to a long service life under normal working conditions. Metav’s presence in Emmerich functions as a quality filter for products like this, ensuring dependable supply and practical advice for integration into existing microscope setups; guidance is available if additional technical data is required. The result is a compact optical upgrade that blends durable design with everyday usability and measurable productivity benefits. For detailed advice on integrating the Euromex bScope BS.6020 into an existing microscope or to request supply information, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for reliable, expert support. Technical Data Article number: BS.6020 SKU: BS.6020 Series: bScope Type: Microscope eyepiece Facts Magnification: 20× Field number: 11 mm Designation: WF 20×/11 mm eyepiece Special features Wide-field (WF) optical design Brand: Euromex Category: For microscopes FAQ What magnification does this eyepiece provide? The eyepiece offers a 20× magnification, specified as WF 20×/11 mm for the Euromex bScope BS.6020 (SKU BS.6020). How large is the visible field with this eyepiece? The field number is 11 mm, which yields a wider visible area than many standard eyepieces and supports quicker specimen scanning. Is the bScope BS.6020 suitable for teaching and routine laboratory work? Yes, the WF design and defined magnification make the bScope BS.6020 well suited to educational use and routine laboratory inspections where consistent visual performance is required. Does the eyepiece require special maintenance? Maintenance is straightforward: keep lenses clean and store the eyepiece dust‑free. The construction of the bScope series is intended for regular use with normal workshop or laboratory care. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Wide Field Microscope Eyepiece 10 mm Field Number - Euromex
Benefit from consistent 20x magnification and a 10 mm field number for wider, clearer observation in stereomicroscope work; the robust wide-field optics support dependable classroom and laboratory imaging. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility advice. EduBlue ED.6020 Microscope eyepiece — 20x, 10 mm field (Euromex) The EduBlue ED.6020 eyepiece delivers 20x wide-field viewing for stereomicroscopes, optimised for educational settings and routine laboratory inspection. Wide-field 20x magnification 10 mm field number for broader view Designed for stereomicroscopes Euromex EduBlue series optics Precision viewing with wide-field optics for consistent results The EduBlue ED.6020 is engineered to provide precise 20x magnification combined with a 10 mm field number, which increases the observable area without sacrificing detail. A larger field number means that more of the specimen is visible at once; this reduces the need for constant stage adjustment and supports faster, more reliable inspections. For users who evaluate multiple samples in sequence, the balanced combination of magnification and field of view translates into higher throughput and fewer interruptions. The optical design is described here in practical terms so that non-specialists can appreciate the direct benefit: a broader view that keeps the specimen in focus longer during manipulation and teaching demonstrations. Practical advantages for education and routine laboratory use As a wide-field eyepiece, this ocular improves visual comfort and reduces eye strain during prolonged observation—an important consideration in teaching labs and quality control tasks. The increased visible area aids demonstration work, enabling groups to track features more readily when switching between objectives or different specimens. The eyepiece’s specification is straightforward to assess: 20x indicates the magnification factor applied to the microscope’s intermediate image; the 10 mm field number quantifies the diameter of the usable image circle seen through the eyepiece. Together, these parameters support clearer demonstrations and more efficient routine inspections, making the accessory well suited for trainers, technicians and educators who require reproducible visual results. Integration, durability and what to expect from the optics Installation is typically simple when used with compatible stereomicroscopes: the ocular is intended to fit standard eyepiece tubes and to perform as part of the broader EduBlue optical system. The wide-field configuration helps maintain peripheral sharpness, which is especially useful when aligning parts or scanning larger samples. Optical maintenance is minimal—regular lens cleaning with suitable tissue and a small amount of lens cleaner preserves image quality—so operational downtime is low. Reliability and consistent imaging are the practical benefits emphasised by this eyepiece: better inspection speed and reduced rework in routine tasks. For buyers seeking predictable, classroom-ready optics, the EduBlue series represents an engineered balance of clarity, usability and workflow advantage. For advice on fitment or to procure the Euromex EduBlue ED.6020 through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and order handling Technical data Article number: ED.6020 SKU: ED.6020 Manufacturer: Euromex Model series: EduBlue Product type: Microscope eyepiece Facts Magnification: 20x Field number: 10 mm Special features For stereomicroscopes Wide-field eyepiece EduBlue optics series FAQ Is the eyepiece compatible with standard stereomicroscopes? The EduBlue ED.6020 is designed for use with stereomicroscopes and fits standard eyepiece tubes where a 20x wide-field ocular is required. What does the 10 mm field number mean in practice? A 10 mm field number indicates the diameter of the usable image circle seen through the eyepiece; for the ED.6020 this produces a broader visible area at 20x magnification, aiding inspection and demonstrations. Can the ED.6020 be used for teaching and group demonstrations? Yes, the combination of 20x magnification and a 10 mm field number makes the eyepiece well suited to educational settings where a wider field aids observation and reduces the need for constant repositioning. How should the eyepiece optics be maintained? Routine care for the ED.6020 includes gentle cleaning with optical tissue and suitable lens cleaner; avoid harsh chemicals and always store the eyepiece dust-free when not in use. Is the product referenced by a specific model code for ordering? The eyepiece is listed under the code ED.6020; referencing this SKU simplifies ordering and compatibility checks for the Euromex EduBlue microscope eyepiece. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x Wide Field Microscope Eyepiece 11.5mm Field Number - Euromex
Take advantage of a 20x wide-field solution with an 11.5 mm field number for efficient visual inspection and comfortable observation; the compact design ensures straightforward integration into microscopy workflows. Order directly via Metav Werkzeuge or consult our specialists for application advice. Microscope eyepiece AE.5582 — Euromex wide-field ocular, 20x / 11.5 mm A Microscope eyepiece AE.5582 is designed to deliver 20x magnification and a wide 11.5 mm field number for laboratory and educational microscopy applications Wide-field eyepiece — 20x magnification Field number 11.5 mm for extended view Euromex quality, model AE.5582 Enhanced resolution for routine inspections The 20x magnification offers a clear step-up from standard eyepieces, enabling precise observation of fine sample details without the need for digital enhancement. With a wide-field optical design, the ocular reduces the need for excessive stage scanning, which streamlines repetitive inspection tasks in teaching labs and basic research. This higher working magnification supports confident visual assessment and helps to reduce measurement uncertainty in everyday microscopy work. Faster overview through an expanded visual field A field number of 11.5 mm significantly widens the visible area, so more of the specimen is visible at once. This advantage translates into fewer repositioning steps during sample screening and a smoother workflow when examining slides or prepared samples. The wide apparent field improves situational awareness at the eyepiece and shortens the time required to locate features, making the eyepiece particularly suitable for high-throughput observation routines. Practical fit and reassurance in quality Manufactured by Euromex, the ocular is specified as a wide-field eyepiece optimised for clarity and ease of use. The compact form factor and optical specification mean the eyepiece integrates well with common educational and laboratory microscopes that accept standard ocular tubes. Confidence in consistent performance is supported by the clear optical parameters provided, which simplify selection and replacement decisions for instrument managers and procurement specialists. For a reliable upgrade to your inspection kit, contact Metav Werkzeuge for availability and application guidance — Metav stands for the democratisation of precision and can advise on suitable microscope configurations; email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical Data Article number: AE.5582 Manufacturer: Euromex Product type: Microscope eyepiece Data Magnification: 20x Field number: 11.5 mm Wide field: WF 20x/11.5 mm Special features Label: Mikroskopokular AE.5582 Category: For microscopes (microscopy accessories) Source: Education PDF, p.13 FAQ What magnification does this eyepiece provide? The Euromex microscope eyepiece AE.5582 delivers 20x magnification, suitable for detailed visual inspection in teaching and laboratory settings. What is the visible field with this ocular? The eyepiece features a field number of 11.5 mm, giving a notably wider apparent field to view more of the specimen at once. Is the AE.5582 compatible with standard microscopes? The AE.5582 is a wide-field eyepiece from Euromex and is intended for use with microscopes that accept standard ocular tubes; confirm tube diameter and mechanical fit with the instrument manual. Where can application advice or technical details be requested? Application guidance and additional technical information are available through Metav Werkzeuge; the AE.5582 (SKU AE.5582) can be discussed with their specialists for system compatibility. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21.0mm 4x bScope Microscope Objective 0.10 NA, WD 21.0 mm - Euromex
Take advantage of the combination of clear overview imaging at 4× magnification, a practical working distance of 21.0 mm and a numerical aperture of 0.10 for reliable sample inspection and efficient workflow; order directly via Metav Werkzeuge or consult our specialists for application advice. Microscope objective bScope BS.8404 — 4× magnification, 21.0 mm working distance Microscope objective bScope BS.8404 provides low-power imaging for rapid sample overview and easy positioning in education and routine laboratory tasks 4× magnification for overview imaging 21.0 mm working distance for sample clearance Numerical aperture 0.10 for moderate resolution Part of the bScope series for microscope use Fast overview and straightforward sample access The 4× magnification of this objective gives immediate overview imaging, ideal for locating regions of interest before switching to higher powers. The substantial working distance of 21.0 mm provides useful clearance between the lens and the specimen, reducing the risk of contact during coarse adjustments. With a numerical aperture of 0.10, the optic balances depth of field and resolving power, which helps maintain sharpness across uneven samples. This lens is particularly useful where fast navigation and robust handling are priorities. Practical benefits for daily laboratory workflows Engineered for straightforward handling, the objective shortens set-up time and cuts the need for frequent refocusing while scanning samples. The design supports consistent image quality across common lighting conditions and simplifies transfer between observation steps and documentation. As part of the bScope range from Euromex, the lens integrates into standard microscope workflows, enabling smoother inspection cycles and more efficient use of technician time in training rooms and routine analysis. Where this objective fits and how to use it effectively The optic is intended for general use with microscopes that accept standard objective mounts and is suitable for educational and life-science overviews where low-power, wide-field observation is required. The specification sheet notes the item as a 4×/0.10 IOS PLi objective with WD 21.0 mm, which underlines its role in rapid sample orientation and initial inspection. For further adaptation to specific stands or imaging systems, supplementary technical data can be provided to ensure correct matching and optimal performance. Contact Metav Werkzeuge for tailored advice on the Euromex bScope BS.8404 objective and assistance selecting the right optics for the application, available from our Emmerich location. Technical Data Article number: BS.8404 SKU: BS.8404 Manufacturer: Euromex Series: bScope Product type: Microscope objective Label: Microscope objective bScope BS.8404 Facts Magnification: 4× Working distance: 21.0 mm Numerical aperture: 0.10 Source: Education PDF S.21; Life Science PDF S.9,39 Special features 4×/0.10 IOS PLi objective WD 21.0 mm Designed for use with microscopes Part of the bScope series FAQ What magnification does this objective provide? The Euromex bScope BS.8404 objective provides 4× magnification, suitable for overview imaging and locating areas of interest. How does the working distance affect handling? A working distance of 21.0 mm allows safer manipulation of samples and easier placement without lens contact when using the bScope BS.8404. What does a numerical aperture of 0.10 mean in practice? A numerical aperture of 0.10 for the bScope BS.8404 gives moderate resolving power with an extended depth of field, useful for observing uneven specimens. Is this objective suited to educational and life-science use? Yes, the optical specification and design of the Euromex bScope BS.8404 make it well suited for educational settings and routine life-science inspections. Can this objective be used for initial sample documentation? The low-power overview offered by the BS.8404 objective supports quick documentation and orientation before higher-magnification imaging is applied. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Precision Caliper Eyepiece 10x with Micrometer and Adjustable Eye Lens, 10x - Euromex
Take advantage of the integrated micrometer and adjustable eyepiece lens together with a clear 10x magnification and a 21 mm field of view to streamline precise inspection tasks; order directly via Metav Werkzeuge or consult the technical team for integration advice. 10x/21 mm eyepiece with micrometer and adjustable eyepiece lens AE.1839 — Euromex microscope eyepiece for measurement work 10x/21 mm eyepiece with micrometer and adjustable eyepiece lens AE.1839 offers a compact measurement solution for microscopy applications, combining a calibrated eyepiece scale with personal focussing comfort for repeatable visual inspections 10x magnification for clear detail 21 mm field of view for wider observation Integrated micrometer for precise measurement Adjustable ocular lens for individual focusing Integrated measurement for reliable inspection results The eyepiece includes an integrated micrometer that enables direct scale-based measurements at the eyepiece plane, providing a simple way to record distances and features without additional attachments. For technicians and inspectors this reduces handling steps and shortens inspection cycles, since measurement markings are available immediately during observation. The optical scale is suited to routine measurement tasks in quality control and inspection microscopy where visual verification with a calibrated eyepiece is sufficient. Comfortable observation with extended overview Equipped with 10x magnification and a 21 mm field of view, the eyepiece balances detail and context: objects appear enlarged for accurate appraisal while the broader field reduces the need for frequent stage movement. The adjustable eyepiece lens allows individual focussing to compensate for differing eyesight, which reduces eye strain during extended use and improves operator consistency. This combination supports longer inspection sessions without loss of clarity or comfort. Practical integration into measurement setups As a measuring eyepiece intended for microscopy, the ocular is suitable for applications where quick, repeatable visual measurements are required. The compact design supports straightforward insertion into compatible microscope tubes used for inspection and metrology tasks. For workshops and laboratories seeking to expand their measurement capabilities, the eyepiece supplies a low-complexity option that complements existing microscopes used for visual checks and basic dimensional assessments. Contact Metav Werkzeuge for personalised advice on fitting the Euromex eyepiece AE.1839 to existing microscopes or for technical clarifications directly from our Emmerich-based team Technical Data Article number: AE.1839 SKU: AE.1839 Brand: Euromex Product type: microscope eyepiece Facts Magnification: 10x Field of view: 21 mm Special features Integrated micrometer Adjustable eyepiece lens Measuring eyepiece for inspection tasks FAQ What measurement capability does the micrometer provide? The integrated micrometer in the Euromex eyepiece AE.1839 provides a calibrated eyepiece scale for direct visual measurement, enabling quick assessment of linear features during inspection. Is the eyepiece suitable for prolonged inspection work? Yes, the 10x magnification and 21 mm field of view in this microscope eyepiece reduce the need for constant stage adjustments, while the adjustable eyepiece lens supports individual focus comfort for longer sessions. Can the eyepiece be used for quality-control checks? The AE.1839 eyepiece is designed for measurement microscopy and is suitable for routine quality-control checks where eyepiece-scale measurements meet the required tolerances. How does one adjust the eyepiece lens for different users? Adjust the ocular lens position until the reticle and specimen are both sharply defined; the adjustable eyepiece lens on the AE.1839 compensates for individual eyesight differences without altering the instrument’s main focus. What should be checked for compatibility with existing microscopes? Compatibility depends on the microscope’s eyepiece tube dimensions and intended measurement setup; verify that the microscope accepts standard eyepieces used for measurement microscopy before fitting the AE.1839. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
220mm 0.4x Objective Attachment 220mm Working Distance, For A/AP/U/B/BC Stands - Euromex
Take advantage of the combination of 0.4x magnification, a 220 mm working distance and broad stand compatibility for smoother sample handling and faster inspection cycles; order the Euromex auxiliary lens via Metav Werkzeuge or consult our specialists for fitment and delivery. 0.4x auxiliary lens NZ.8904 — 0.4x auxiliary lens for stereomicroscopes, 220 mm working distance (Euromex) A 0.4x auxiliary lens NZ.8904 that extends the field of view of compatible stereomicroscopes while preserving a long working distance for safe sample manipulation 0.4x magnification for wider field of view 220 mm working distance for larger samples Compatible with A, AP, U, B and BC stands Ideal for stereomicroscopy applications See more in a single view with reduced magnification The 0.4x magnification reduces the effective magnification of the optical system, providing a noticeably wider field of view that speeds up visual inspection and orientation. Where fine detail remains necessary but a broader context is beneficial, the adapter lens simplifies tasks such as part alignment, solder joint inspection or quality checks by reducing the number of repositionings. For process-driven environments the result is greater throughput and fewer interruptions during routine examinations. Safe handling thanks to a generous working distance With a 220 mm working distance, the lens creates substantial clearance between the objective and the specimen, enabling comfortable manipulation of larger objects and the use of handling tools beneath the optics. This spacing reduces the risk of collision and allows for ergonomic operation during extended inspection periods. The extended distance also supports lighting arrangements and auxiliary probes without compromising access to the specimen. Broad compatibility reduces accessory counts Designed for use on common stereo stands, the accessory fits A, AP, U, B and BC mounts, providing a straightforward way to broaden the capability of an existing microscope fleet. Compatibility across widely used stand types minimises the need for multiple specialised lenses, which reduces spare-part complexity and the total cost of ownership. The versatile adapter is thus a practical choice for workshops, laboratories and educational facilities that demand flexible, interoperable optics. Practical integration for routine laboratory and workshop use Installation is intended to integrate with established stereomicroscope setups so that the optical system can be adapted without extensive reconfiguration. The lens supports faster inspection cycles and improved situational awareness while maintaining optical performance suitable for general inspection tasks. For further technical clarifications or confirmation of fitment to a specific instrument, Metav Werkzeuge provides direct advice and can supply the accessory together with compatibility guidance by e‑mail or telephone. For tailored compatibility checks and to procure the Euromex 0.4x auxiliary lens NZ.8904 for workshop or laboratory use, contact Metav Werkzeuge GmbH in Emmerich and consult our specialists for immediate guidance and supply. Technical Data Article number: NZ.8904 SKU: NZ.8904 Manufacturer: Euromex Facts Magnification: 0.4x Working distance: 220 mm Special features Suitable for A, AP, U, B and BC stands Product type: Microscope auxiliary lens Category: For stereomicroscopes FAQ What does 0.4x magnification change in practice? The 0.4x factor reduces the microscope's effective magnification and increases the field of view; the Euromex 0.4x auxiliary lens NZ.8904 is therefore suitable where a larger overview of the sample is required while retaining sufficient resolution for inspection. Which microscope stands are compatible with this lens? Compatibility covers A, AP, U, B and BC stands, so the lens integrates with a wide range of common stereomicroscope mounts without the need for additional adapters. Can larger or bulkier specimens be inspected with this accessory? Yes — the 220 mm working distance provides extra clearance for larger samples and for manipulation under the objective, improving safety and handling during inspection tasks. Is this accessory suitable for routine workshop and educational use? The lens is intended for general stereomicroscope applications where increased field of view and sample access are beneficial; for specific laboratory standards or specialised imaging, check the optical requirements against the Euromex NZ.8904 specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm EWF 10x Eyepiece with Reticle, Ø30mm Tube - Euromex
Benefit from a compact inspection optic that pairs 10x magnification with a 22 mm wide field of view and an integrated reticle for clear, repeatable measurements; the eyepiece’s 30 mm barrel diameter simplifies integration into standard microscope tubes. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Euromex EWF 10x/22 mm Eyepiece IS.6210-C — 30 mm Barrel, Integrated Reticle The EWF 10x/22 mm eyepiece IS.6210-C is a wide-field microscope eyepiece with an integrated crosshair, designed for measuring and alignment tasks in inspection and laboratory workflows. Wide 22 mm field of view 10x magnification for consistent detail Integrated reticle for precise alignment 30 mm barrel diameter for standard tubes Improved measurement clarity with a wide field The eyepiece’s 10x magnification combined with a 22 mm field of view offers a balance between magnification and situational awareness, enabling users to see larger sample areas without frequent repositioning. This reduces inspection time and supports repeatable visual checks in quality control processes. The crosshair reticle provides a defined reference for measurements and alignment, which is especially useful when documenting positions or comparing features across parts. Seamless integration into existing inspection set-ups With a 30 mm barrel diameter, the optic fits common stereo and inspection microscope tubes, enabling straightforward replacement or upgrade without mechanical modification. The design suits measurement-oriented accessories and is categorised for measuring eyepieces, allowing simple incorporation into metrological routines. The eyepiece’s format supports calibrated imaging chains when paired with appropriate objective lenses and camera adapters, facilitating traceable documentation of findings. Practical advantages for busy workshops and labs Engineered for routine use, the eyepiece supports faster decision-making at the bench by making alignment and basic measurement tasks more efficient. The visible crosshair aids repeatable positioning during comparative inspection or when aligning tools and fixtures, helping to reduce rework. Where documentation and traceability are required, the reticle assists in capturing consistent visual references that complement numerical measurement systems. For precision inspection tasks, request supply and application advice from Metav Werkzeuge GmbH in Emmerich — our consultants will recommend the right eyepiece configuration for the specific measurement workflow. Technical Data Article number: IS.6210-C SKU: IS.6210-C Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10x Field of view: 22 mm Barrel diameter: Ø 30 mm Category: Measuring eyepiece Special features EWF designation (extra wide field) Integrated reticle (crosshair) Suitable for measurement and alignment tasks Image: IS.6210-C.jpg — https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1e/a5/f1/6a/6af1a51ed8ecf2f60acae0e0/IS.6210-C.jpg FAQ Is the eyepiece suitable for routine dimensional checks? The Euromex EWF 10x/22 mm eyepiece IS.6210-C is intended for visual measurement and alignment tasks and supports routine checks where a reticle-based reference is appropriate. Can the eyepiece be used with standard stereo microscopes? Yes, the Ø 30 mm barrel diameter makes the eyepiece compatible with many standard inspection and stereo microscope tubes that accept 30 mm eyepiece barrels. How does the reticle help with documentation? The integrated crosshair in the IS.6210-C provides a repeatable reference point that simplifies photographic documentation and comparative visual records during inspections. Does the wide field improve inspection throughput? A broader 22 mm field of view reduces the need for frequent sample movement, helping to speed up routine inspections while maintaining sufficient detail at 10x magnification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm EWF Eyepiece 10x With 10/100 Micrometer And Reticle, Ø30mm Tube - Euromex
Take advantage of precise, repeatable measurement in a compact eyepiece: 10x magnification combined with a 22 mm field of view provides clear observation and reliable scale reading. Order directly via Metav Werkzeuge or contact our consultants for application advice. EWF 10x/22 mm Eyepiece IS.6210-CM by Euromex — 10x magnification, 22 mm field of view EWF 10x/22 mm Eyepiece IS.6210-CM is a wide-field microscope eyepiece with an integrated 10/100 micrometer scale and crosshair, designed for precision measurement on instruments with a 30 mm tube Wide 22 mm field of view Integrated 10/100 micrometer scale Crosshair reticle for alignment Fits Ø 30 mm tube Measure with confidence: accurate scale for repeatable results The eyepiece includes a 10/100 micrometer scale combined with a crosshair reticle, enabling quantified observations without additional accessories. The built-in scale allows simple comparison of features directly in the ocular image; each division is suitable for coarse and fine reading during inspection. This arrangement reduces setup time and supports a controlled measurement workflow, which is particularly useful in production checks and quality assurance where traceable, repeatable readings are required. Comfortable observation and wide image field for faster inspections A 22 mm field of view gives a broader image area than standard oculars, so operators can view more of the specimen at once and locate features faster. The 10x magnification balances detail and context: it magnifies without overly restricting the visible area, helping to maintain orientation while measuring. Wider fields can reduce operator fatigue and speed up routine inspections, especially in tasks where rapid comparison between features is necessary. Compatibility and straightforward integration with existing microscopes Designed for a 30 mm tube, this ocular integrates cleanly into common microscope stands and inspection systems used in workshops and laboratories. The wide-field design is compatible with many standard microscope heads; when fitted, the measurement scale becomes immediately available in the optical path, avoiding the need for digital overlays or external scale slides. This simplicity translates into faster commissioning and fewer adjustments during shift changes. Practical handling and application guidance The eyepiece's construction focuses on functional reliability for everyday use: a robust mounting diameter and clear reticle markings support long-term operational use in production and educational environments. For tasks requiring comparative measurement or quick calibration checks, the ocular is a compact solution that reduces accessory complexity. If indications about specific system compatibility are needed, technical advice is available to ensure the ocular suits the intended microscope configuration. Contact Metav Werkzeuge for tailored technical advice and to confirm compatibility of the Euromex EWF 10x/22 mm eyepiece IS.6210-CM with current inspection equipment Technical data Article number: IS.6210-CM Product type: Microscope eyepiece Brand: Euromex Name: EWF 10x/22 mm Eyepiece IS.6210-CM Facts Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Micrometer: 10/100 micrometer scale Special features Wide-field (EWF) design Crosshair reticle Integrated measurement scale Compatible with 30 mm tube systems FAQ What magnification does this eyepiece provide? The eyepiece offers 10x magnification, which balances detail and context for inspection tasks with moderate enlargement needs. Does the ocular include a measurement scale? Yes, the Euromex EWF 10x/22 mm eyepiece IS.6210-CM features an integrated 10/100 micrometer scale combined with a crosshair reticle for direct visual measurement. Which microscopes will this eyepiece fit? The ocular is designed for microscopes with a 30 mm tube diameter; compatibility with specific stands depends on the instrument tube standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm EWF Eyepiece 10x With Dioptre Adjustment - Euromex
Take advantage of the combination of 10× magnification, a 22 mm wide field of view and integrated diopter adjustment for faster, more reliable visual inspections; order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility advice. EWF 10x/22 mm Eyepiece AX.6010 – Wide-field 10× ocular with diopter adjustment The EWF 10x/22 mm eyepiece AX.6010 is a wide-field microscope eyepiece designed for use with the Achios‑X‑Observer series, offering clear, comfortable observation and simple focal fine-tuning. 10× magnification for detailed inspection 22 mm wide field of view Integrated diopter adjustment Designed for Achios‑X‑Observer systems Faster inspections with a true wide field The combination of 10× magnification and a 22 mm field of view delivers a noticeably larger apparent image, enabling quicker scanning of specimens and components without sacrificing detail. The wide-field design reduces the need for frequent stage movement during routine checks, which improves throughput in quality control and inspection tasks. The optical characteristics are aimed at delivering high-contrast optics for clear edge definition, so operators can identify features and defects more efficiently. Practical compatibility and straightforward handling Compatibility with the Achios‑X‑Observer system ensures a seamless fit and repeatable alignment in modular microscope setups. The eyepiece is configured to be exchanged quickly between observation tubes, supporting flexible workflows in laboratories, education and light industrial inspection. The built-in diopter adjustment allows individual users to achieve personal focus compensation without altering the instrument’s coarse focus, which preserves calibration and speeds up multi-user shifts. Consistent results and low-maintenance use Engineered for repeatable visual assessment, the ocular supports standardised inspection routines where optical consistency matters. The robust optical assembly maintains focus stability under normal use, contributing to reliable visual measurement sessions. For specialised applications or if further technical data are required, additional compatibility checks or clarifications can be provided to ensure the eyepiece meets specific measurement or documentation needs. Contact Metav Werkzeuge to confirm compatibility or to request supply of the Euromex EWF 10x/22 mm eyepiece AX.6010; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AX.6010 SKU: AX.6010 Brand: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 22 mm Special features Diopter adjustment Compatible with Achios‑X‑Observer systems Wide-field (EWF) optical design FAQ What magnification and field of view does this eyepiece offer? The eyepiece provides 10× magnification with a 22 mm field of view, delivering a broad visible area for faster inspection. Is the eyepiece compatible with Achios‑X‑Observer microscopes? Yes, the EWF 10x/22 mm eyepiece AX.6010 is designed for use with the Achios‑X‑Observer range and fits the observation tube specified for that series. How does the diopter adjustment benefit users? The integrated diopter adjustment allows individual visual correction without changing the main focus, enabling quick handovers between operators while maintaining measurement consistency with the eyepiece. Is this ocular suitable for teaching and routine lab work? The wide-field design and straightforward handling make the eyepiece well suited to educational environments and routine laboratory inspections where quick, comfortable observation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm HWF 10x Eyepiece for bScope Ø30mm Tube, 10x Magnification - Euromex
Take advantage of the combination of clear 10× magnification, a 22 mm field of view and simple integration with bScope systems for faster inspection and reduced operator fatigue; order the eyepiece directly via Metav Werkzeuge or request expert advice from our consultants. HWF 10x/22 mm Eyepiece for bScope (Ø 30 mm tube) — Euromex The HWF 10x/22 mm Eyepiece for bScope is a wide-field microscope eyepiece designed for visual inspection and teaching applications, compatible with bScope units featuring a 30 mm tube. 10× magnification for clear detail 22 mm wide field of view Compatible with Ø 30 mm bScope tube Euromex quality — BS.6310 Faster inspections with a larger viewing area The HWF 10x/22 mm Eyepiece for bScope delivers 10× magnification together with a 22 mm field of view, a combination that increases the visible specimen area without sacrificing detail. For routine measurements and quick visual checks, the larger field reduces the need for constant stage adjustments, which speeds up throughput in production or laboratory workflows. The optical specification is stated to ensure predictable performance when replacing eyepieces or standardising inspection stations. Reliable fit and optical clarity for bScope systems Designed specifically for bScope microscopes, this eyepiece offers simple mechanical compatibility with a 30 mm tube, ensuring a secure seating and repeatable alignment. The designation BS.6310 identifies the Euromex item and helps maintain traceability across instrument inventories. Built to the common standard dimensions used in many educational and light-industrial microscopes, the component reduces downtime associated with mismatched optics and supports consistent imaging across multiple workstations. Practical advantages for workshops and training environments As a wide-field eyepiece, the accessory helps operators locate features more quickly and reduces eye strain during extended use, which is beneficial in both vocational training and quality-control tasks. The combination of a broad field and moderate magnification makes the eyepiece well suited to inspection, sample orientation and documentation tasks where rapid assessment is more important than extreme magnification. The optical characteristics therefore contribute directly to improved operational efficiency and a lower learning curve for new users. What the optical data means in practice When comparing eyepieces, magnification determines how much larger a specimen appears relative to the naked eye, while field of view specifies the maximum visible area through the ocular. In this eyepiece the 10× power enlarges fine details to a practical inspection scale, and the 22 mm viewing circle allows a broader context to be seen at once. These parameters together influence task selection, lighting needs and camera coupling options for photodocumentation; choosing matching eyepieces streamlines measurement routines and ensures consistent visual results. For reliable wide-field observation and to check availability of the Euromex HWF 10x/22 mm eyepiece BS.6310, contact Metav Werkzeuge for product advice and order processing at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer: Euromex Manufacturer item number: BS.6310 SKU: BS.6310 Product type: Microscope eyepiece Dimensions & optical data Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Compatibility & features Designed for bScope systems Wide-field eyepiece HWF 10x/22 mm designation FAQ What magnification and viewing area does this eyepiece provide? The eyepiece delivers 10× magnification with a 22 mm field of view, specified for the Euromex HWF 10x/22 mm Eyepiece BS.6310. Which microscopes is this eyepiece compatible with? This eyepiece is designed for bScope microscopes that use a Ø 30 mm tube; the designation confirms mechanical and optical matching for such systems. Is the eyepiece suitable for educational and workshop use? Yes, the wide field and moderate magnification make this eyepiece suitable for training, general inspection and routine quality tasks where fast orientation and reduced eye strain are priorities. How should the eyepiece be cleaned and maintained? Cleaning should be performed with a soft lens cloth and suitable lens cleaner; avoid abrasive materials and excessive force to preserve the optical coatings and ensure long service life. Can this eyepiece be used with camera adapters? The eyepiece is intended for visual observation; camera coupling depends on the microscope's camera port and adapters rather than the eyepiece itself, so camera compatibility is determined by the microscope interface. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm HWF Eyepiece 10x with Reticle, 22 mm Field - Euromex
Precise visual measurement with a 10x view and a clear 22 mm field of view supports consistent inspection results; the integrated reticle enables direct scaling within the eyepiece. Order the HWF 10x/22 mm eyepiece NZ.6010-C directly via Metav Werkzeuge or ask our consultants if needed. HWF 10x/22 mm Eyepiece with Reticle NZ.6010-C — 10x Magnification, 22 mm Field HWF 10x/22 mm eyepiece NZ.6010-C is a precision microscope eyepiece with an integrated reticle designed for measurement and inspection tasks in metrology-focused workshops. 10x high-contrast magnification 22 mm wide field of view Integrated reticle for precise measurements Designed for measurement eyepieces Measure with confidence using a built-in scale The 10x ocular delivers magnification appropriate for routine metrology and quality-control tasks while the reticle supplies a fixed reference for direct comparison and scaling. In practical terms, marks on the reticle are used to estimate dimensions or to align features without additional hardware; this reduces handling steps and potential sources of error. The construction is intended for precision visual checks rather than substitution of calibrated stage micrometers, and the integrated scale is suited to comparative measurement workflows commonly found in inspection benches. See more at once for faster inspection cycles A 22 mm field of view offers a noticeably wide field for an eyepiece in this class, decreasing the need for frequent stage repositioning and increasing throughput during repetitive checks. This broader visual span speeds up inspection tasks by keeping more of the specimen in view, which is particularly advantageous when locating features or scanning patterned surfaces. The result is improved operational efficiency: fewer adjustments, steadier observation and a smoother workflow on the shop floor. Integrates smoothly into metrology and inspection setups As a microscope eyepiece crafted for measurement purposes, compatibility with existing measurement microscopes and camera adapters is straightforward; the ocular is classified among measurement eyepieces and is commonly used in dedicated inspection systems. The brand Euromex supplies a product that focuses on robust optical performance and practical usability, making it appropriate for laboratories and workshop environments where reliable visual metrology is required. The eyepiece balances optical clarity and functional measurement aids to support consistent results over repeated use. For precise visual metrology choose the Euromex HWF 10x/22 mm eyepiece—contact Metav Werkzeuge for procurement and specialist advice direct from Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: NZ.6010-C SKU: NZ.6010-C Product type: microscope eyepiece Manufacturer: Euromex Facts Magnification: 10x Field of view: 22 mm Special features Integrated reticle Product label: HWF 10x/22 mm eyepiece with reticle NZ.6010-C Category path: Messokulare / Microscopy accessories / Measurement eyepieces FAQ What magnification does the eyepiece provide? The eyepiece is specified at 10x magnification and is intended for visual inspection and comparative measurement tasks using its integrated reticle. Can the reticle be used for simple dimensional checks? Yes, the integrated reticle in the HWF 10x/22 mm eyepiece NZ.6010-C is designed for direct comparative measurements and alignment during inspection. Is this eyepiece suitable for measurement microscopes? This microscope eyepiece is classified as a measurement eyepiece and is compatible with standard inspection setups that accept measurement-grade oculars. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm HWF Microscope Eyepiece 10x With 10/100 Micrometer And Reticle - Euromex
Combining 10x magnification, a 22 mm wide field of view and the integrated 10/100 micrometre scale with a central crosshair, this eyepiece supports precise in-situ measurement and repeatable alignment for inspection and quality-control workflows. Order the eyepiece directly via Metav Werkzeuge or ask their consultants for compatibility and delivery information. HWF 10x/22 mm eyepiece with 10/100 micrometre scale and crosshair (NZ.6010-CM) — Euromex microscope eyepiece An HWF 10x/22 mm eyepiece (NZ.6010-CM) is designed for accurate measurement and alignment tasks in microscopy and routine inspection environments 10x magnification for clear detail 22 mm wide field of view for broader observation Integrated 10/100 micrometre scale for direct readings Central crosshair for precise alignment Precise measurement without additional equipment The HWF 10x/22 mm eyepiece brings a practical measurement capability directly into the optical path. The 10/100 micrometre scale is graduated to enable quick visual quantification of features, reducing the need to interrupt inspection for external measuring tools. With 10x magnification and a 22 mm field of view, the reticle and crosshair remain legible while preserving context, which accelerates decision-making in production control and repeated inspections. The combination of reticle graduations and a wide field supports consistent repeatability of results across multiple operators. Comfortable viewing that speeds inspection A wide field eyepiece such as this balances magnification and context: the 22 mm field of view allows larger areas to be assessed at once while the central crosshair maintains alignment reference. Ergonomic observation reduces operator fatigue during longer sessions and helps sustain throughput on inspection benches. The product is suitable for microscope-based visual measurement, documentation and alignment tasks in quality assurance, component inspection and R&D settings, providing both clarity and orientation when conditions demand both speed and accuracy. Reliable integration for traceable workflows Designed by Euromex and listed as NZ.6010-CM, the eyepiece is intended to support traceable measurement steps within an inspection routine. The visible 10/100 micrometre graduations permit fast comparative checks and can be used as part of documented quality procedures. As a measurement-capable eyepiece, it reduces handling time and the potential for errors introduced by repeated part transfers. For laboratories and workshops seeking to streamline microscope-based checks, this reticle-equipped eyepiece is a practical choice that supports efficient, verifiable results. For ordering or technical advice on the Euromex HWF eyepiece, contact Metav Werkzeuge – Metav’s specialists can confirm compatibility and dispatch details: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: NZ.6010-CM Manufacturer: Euromex Manufacturer number: NZ.6010-CM Product type: microscope eyepiece Core specifications Magnification: 10x Field of view: 22 mm Micrometre scale: 10/100 Reticle: crosshair Features HWF wide-field eyepiece Integrated crosshair reticle For measurement and alignment in microscopy FAQ Is the reticle scale suitable for direct measurement on small parts? The integrated 10/100 micrometre scale in the eyepiece allows direct visual measurement of small features; the graduation supports fast comparative and routine checks when used with the specified 10x magnification. Which microscope tube sizes is the eyepiece compatible with? Compatibility depends on the microscope ocular tube diameter; the eyepiece NZ.6010-CM is a standard microscope eyepiece format and fits standard ocular tubes—confirm the tube diameter against the HWF eyepiece specification before installation. How should the micrometre scale be read for repeatable results? Readings with the 10/100 micrometre scale require stable focus and consistent magnification (10x); align the feature with the crosshair and note the graduation mark for repeatable documentation in inspection records. Can the eyepiece be used for both inspection and measurement tasks? Yes, the wide field and integrated reticle make the eyepiece suitable for inspection while providing measurement capability for quick, on-the-spot quantification in quality-control workflows. What is the recommended cleaning method for the eyepiece optics and reticle? Use a soft brush or dry optical wipe to remove loose debris, followed by lens tissue with a small amount of optical cleaning fluid if necessary; avoid abrasive materials to protect the reticle and coatings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Pair HWF 10x Eyepieces High Wide Field 10x/22mm - Euromex
Precision optics with 10x magnification and a 22 mm visible field enable efficient, comfortable inspection work; the pair configuration ensures stereo perception for three‑dimensional observation. Order the Euromex eyepieces via Metav Werkzeuge or request tailored advice from our consultants to confirm compatibility with the intended stereomicroscope. Pair HWF 10x/22 mm Eyepieces NZ.6010 — Euromex stereomicroscope eyepieces with 10x magnification and 22 mm field The Pair HWF 10x/22 mm Eyepieces NZ.6010 are intended for stereomicroscopes and provide a wide viewing area for inspection, assembly and quality control tasks 10x magnification for detailed observation 22 mm wide field of view for larger image area Designed for stereomicroscopes Euromex optical quality and reliable construction Precise visual detail for systematic inspection These eyepieces deliver 10x magnification combined with a 22 mm visual field, making them suitable for tasks that require both enlargement and a broad overview. The larger field of view allows faster scanning of components and reduces the need for frequent repositioning, which supports more efficient workflows in production and laboratory environments. The optical design preserves image sharpness across much of the viewing area, so small features remain discernible while maintaining context. Ergonomic viewing that reduces fatigue A wider viewing area contributes to comfortable viewing during extended sessions, limiting eye strain and enabling longer periods of concentrated inspection. Supplied as a matched pair for stereo rigs, the eyepieces support natural depth perception and accurate spatial assessment of parts. This ergonomic advantage is particularly relevant in repetitive quality checks and precision assembly, where operator comfort directly affects consistency and throughput. Practical application and compatibility in the workplace Optimised for use with stereomicroscopes, the eyepiece pair suits typical industrial applications such as electronics inspection, component assembly and routine quality control. The HWF designation indicates a wide-field configuration aimed at providing an expanded visual area without compromising magnification. For procurement decisions, these optics present a straightforward upgrade to existing stereo systems that require improved image area and dependable optical performance. Contact Metav Werkzeuge for personalised advice on Euromex eyepieces and reliable supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: NZ.6010 Manufacturer: Euromex Product type: microscope eyepiece Label: Paar HWF 10x/22 mm Okulare NZ.6010 Facts Magnification: 10x Field of view: 22 mm Special features HWF series Supplied as a pair For stereomicroscopes FAQ What magnification do these eyepieces provide? The Euromex pair offers 10x magnification (Pair HWF 10x/22 mm Eyepieces NZ.6010) for enhanced detail during inspection. Is this eyepiece pair suitable for stereomicroscopes? Yes, the eyepieces are designed specifically for stereomicroscopes and are supplied as a matched pair to preserve stereo vision. What does the 22 mm specification mean in practice? The 22 mm figure denotes the visible field diameter; a wider field facilitates faster scanning of components and a larger apparent image area. Are these eyepieces appropriate for prolonged inspection work? The wide-field configuration and pair matching help reduce eye strain during extended use, making them suitable for repetitive inspection tasks. Which applications are these eyepieces best suited to? Common uses include electronics inspection, precision assembly and quality control where both detail and a broad view are required. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Precision Caliper Eyepiece 10x Super Wide Field 20x20 Grid - Euromex
Data inconsistency: the product lists "Euromex" as the manufacturer, but this brand is not included in the required manufacturer directory provided, which raises concerns about the accuracy and compliance of the information. Please supply a manufacturer from the approved list or confirm the correct manufacturer details to ensure that a compliant product description can be created and the product meets the necessary standards for inclusion in the catalogue. Accurate manufacturer information is crucial for maintaining the integrity of the directory and ensuring that all products adhere to the specified guidelines, avoiding potential issues with verification or approval processes.
22mm WF 10x Widefield Eyepiece with Micrometer Scale, Ø 23.2mm Tube - Euromex
Take advantage of the combination of 10× magnification, a 22 mm wide field of view and an integrated micrometer scale for reliable, repeatable measurements in inspection and calibration tasks. Order the WF 10x/22 mm Weitfeldokular mit Mikrometerskala, Ø 23,2 mm Tubus BS.6310-M directly via Metav Werkzeuge or ask our consultants if needed. WF 10x/22 mm Eyepiece with Micrometer Scale (BS.6310-M) — Wide-field 10×, 22 mm FOV, Euromex A WF 10x/22 mm eyepiece with micrometer scale designed for precise measurement and visual inspection in laboratory and quality-control microscopy. Wide-field 22 mm field of view Integrated micrometer scale for measurements 10× magnification for detailed inspection Accurate measurement where it matters The ocular provides 10× magnification combined with a micrometer scale, enabling direct measurement at the eyepiece without additional imaging hardware. This configuration supports efficient verification of small dimensions and allows technicians to read linear values directly through the eyepiece, simplifying the measurement workflow. The 22 mm field of view increases the visible sample area, reducing the need for frequent stage adjustments and speeding up routine checks. Comfortable observation and secure fitting Designed for standard instrumentation, the eyepiece fits a 23.2 mm tube and is optimised for prolonged use where operator comfort and repeatability are essential. The wide-field design produces a visually generous, distortion-minimised image that reduces eye strain during extended inspection sessions. Clear reticle markings within the micrometer scale enable fast interpretation of measurement ticks, improving throughput in production-control environments. Practical benefits for labs and inspection bays Using an eyepiece that integrates measurement capability reduces handling time and potential transfer errors between measuring devices. The combination of precision optics and an eyepiece-scale approach supports reproducible results for calibration routines and comparative measurements. For microscopy-based quality assurance, the ocular offers a compact solution that keeps instrumentation simple while maintaining documented measurement steps for traceability. Metav as a reliable partner in precision Metav combines decades of expertise with comprehensive supply for industry and workshops, offering a practical route to acquisition and technical advice. With a broad product range and a focus on reliability, Metav supports straightforward procurement and dependable delivery from Emmerich. If additional technical details are required or there is uncertainty about compatibility with existing equipment, the team can provide clarification and guidance by email or phone. For precise measurement tasks using the Euromex WF 10x/22 mm eyepiece (BS.6310-M), contact Metav Werkzeuge GmbH in Emmerich for purchasing advice and compatibility checks — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: BS.6310-M SKU: BS.6310-M Manufacturer: Euromex Product type: microscope eyepiece Numbers / Data Magnification: 10× Field of view: 22 mm Tube diameter: Ø 23.2 mm Special features / Versions Wide-field (WF) eyepiece Integrated micrometer scale Measurement eyepiece (Messokular) FAQ What magnification does the eyepiece provide? The Euromex WF 10x/22 mm eyepiece (BS.6310-M) offers 10× magnification, suitable for detailed visual inspection and eyepiece-level measurement. Can this eyepiece be used for precise linear measurements? Yes. The integrated micrometer scale within the eyepiece enables direct linear readings for routine measurement and calibration tasks. Which tube size is required for fitting the eyepiece? This ocular is designed for a 23.2 mm tube diameter and is compatible with microscopes accepting that standard tube size. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Widefield Eyepiece 10x, 10x Magnification - Euromex
Incorrect data: the manufacturer "Euromex" is not included in the approved manufacturer list; as a result, it is not possible to generate the product description or provide any further details about the item in question, since the manufacturer does not meet the necessary criteria or standards outlined in the approved list, which is a critical requirement for ensuring compliance with established guidelines and maintaining the integrity of the product database; therefore, any attempt to proceed with generating a description for a product associated with this manufacturer would be invalid and could lead to potential discrepancies or inaccuracies in the system.
23 mm HWF 10x Eyepiece with Reticle for Nexius Zoom EVO - Euromex
Benefit from 10x magnification combined with a 23 mm field of view and an integrated reticle for precise visual measurement; order the HWF 10x/23 mm eyepiece directly via Metav Werkzeuge or ask our consultants if needed. HWF 10x/23 mm eyepiece with reticle for Nexius Zoom EVO NZ.6210-C — Euromex measurement eyepiece with 10x magnification and 23 mm field of view The HWF 10x/23 mm eyepiece with reticle for Nexius Zoom EVO NZ.6210-C is a measurement-focused ocular designed to convert the Nexius Zoom EVO into a calibrated inspection system for repeatable dimensional checks and alignment tasks. Euromex HWF eyepiece »NZ.6210-C« with reticle 10x magnification for fine inspection 23 mm field of view for clear measurement Compatible with Nexius Zoom EVO microscope Accurate measurement where repeatability matters The measurement eyepiece provides 10x magnification together with a 23 mm field of view, enabling clear observation of small features while retaining a broad image area for context. The integrated reticle supplies a fixed reference for linear comparisons and alignment checks; when used with calibrated optics it supports traceable inspection routines. For workshops and QA labs this combination reduces measurement uncertainty and streamlines visual verification steps. Optical compatibility and practical integration Designed for seamless use with the Nexius Zoom EVO, the ocular matches the optical tube and imaging geometry of the series, which preserves image sharpness across the field. The Euromex design focuses on distortion control and consistent reticle visibility, so measurement marks remain usable at varying zoom settings. Installation is straightforward and the eyepiece complements digital capture workflows when images require overlaid scales for documentation. Built for routine inspection and documentation As a measurement accessory, the eyepiece assists in both manual inspection and the preparation of images for reports. The fixed reticle simplifies comparative checks and speeds up repetitive tasks, while the 23 mm field helps operators keep critical features in view without frequent repositioning. For laboratories seeking a cost-effective way to add calibrated visual checks, this ocular supports productivity and reliability in everyday inspection work. For reliable measurement results and supply from a Europe-based partner, contact Metav Werkzeuge for advice or to request the NZ.6210-C for integration into inspection set-ups; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: NZ.6210-C SKU: NZ.6210-C Manufacturer: Euromex Product type: Microscope eyepiece Core specifications Magnification: 10x Field of view: 23 mm Features and compatibility Integrated reticle for measurement and alignment Compatible with Nexius Zoom EVO microscope series Category: Measurement eyepiece for inspection and documentation FAQ Is this eyepiece compatible with all Nexius Zoom EVO models? Compatibility is intended for the Nexius Zoom EVO series; the HWF 10x/23 mm eyepiece NZ.6210-C matches the tube geometry used in the Nexius Zoom EVO range. What measurement tasks is the reticle suitable for? The built-in reticle in the NZ.6210-C is intended for quick visual comparisons, alignment tasks and simple linear scaling during inspection and documentation. Can the eyepiece be used with camera adapters for image capture? Yes, the eyepiece preserves reticle visibility when the Nexius Zoom EVO imaging path is correctly configured, supporting photographic documentation with visible scale reference. How precise are measurements made with this eyepiece? Precision depends on the overall optical calibration of the microscope system; the NZ.6210-C provides a stable reference mark, and reproducible results are achieved when combined with a calibrated zoom and imaging setup. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23 mm Pair HWF 10x Eyepieces 10x Magnification, 23mm Field - Euromex
High-precision optics and a generous field of view combine to speed up inspection tasks while reducing operator fatigue; order the eyepiece pair directly via Metav Werkzeuge or request consultancy for application-specific guidance. Pair HWF 10x/23 mm Eyepieces NZ.6210 – Wide-field 10× Optics for NexiusZoom EVO (Euromex) The Pair HWF 10x/23 mm Eyepieces NZ.6210 are wide-field oculars designed for NexiusZoom EVO stereomicroscopes, intended to enhance visual coverage and diagnostic clarity in inspection, assembly and quality-control environments Wide 23 mm field of view 10× high-field magnification Designed for NexiusZoom EVO compatibility Optimised for prolonged observation tasks Broader visual coverage for faster inspection The wide-field design of these eyepieces provides a 23 mm field of view, allowing operators to see more of the specimen at once. Combined with 10× magnification, this reduces the need for frequent stage adjustments and supports faster routine inspections and component checks. For production lines or laboratory benches where throughput and repeatability matter, the wider visual span translates into measurable time savings and fewer repositioning errors. Reliable optical pairing with NexiusZoom EVO systems These oculars are specified for the NexiusZoom EVO series and ensure optical alignment and consistent image rendition when fitted to compatible stereomicroscopes. The eyepiece pair preserves the instrument’s native imaging characteristics, maintaining reliable apparent magnification and focus behaviour across zoom ranges. For workshops and inspection labs, this means straightforward integration without recalibration of downstream measurement or documentation workflows. Practical advantages for everyday workshop use As a matched set of HWF eyepieces, this ocular pair supports comfortable observation during extended sessions. The wide-field format reduces eye movement and helps to keep details within the visual frame, which benefits repetitive tasks such as solder inspection, fine assembly or visual quality control. The eyepiece set is presented as a dedicated accessory for stereomicroscope applications, offering a direct, practical upgrade route for teams seeking improved optical ergonomics and process efficiency. For application advice or further technical details on the Euromex Pair HWF 10x/23 mm Eyepieces NZ.6210, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific inspection tasks Technical Data Article number: NZ.6210 SKU: NZ.6210 Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10× Field of view: 23 mm Special features Pair HWF eyepieces for NexiusZoom EVO Suitable for stereomicroscopes Label: Pair HWF 10x/23 mm eyepieces for NexiusZoom EVO NZ.6210 FAQ What magnification and field of view do these eyepieces provide? The eyepiece pair delivers 10× magnification with a 23 mm field of view, optimised for wide-area observation. Are these eyepieces compatible with all stereomicroscopes? They are specified for the NexiusZoom EVO series; compatibility with other stereomicroscopes depends on ocular barrel dimensions and optical design—consult Metav Werkzeuge for verification. What does HWF mean and why does it matter? HWF indicates a wide-field eyepiece design, which increases the observable area and reduces the need for frequent specimen repositioning during inspection. Can the eyepieces be used for prolonged observation without discomfort? The wide-field format helps reduce eye movement and visual fatigue, making the set suitable for extended inspection or assembly shifts. Is the eyepiece pair suitable for quality-control documentation? Yes; the improved coverage and stable optical pairing with NexiusZoom EVO instruments support consistent visual assessment and photographic documentation. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.37x Objective for 1/3" Camera Sensor, 0.37x - Euromex
Combine compact 0.37x reduction optics with a Ø 23.2 mm tube fit for reliable image scaling in microscopy systems; ideal where sensor matching and accurate field‑of‑view control are required. Order the DC.1353 directly via Metav Werkzeuge or consult our specialists for integration support. DC.1353 C‑Mount camera adapter with 0.37x lens (Euromex) The DC.1353 is a C‑Mount camera adapter that couples a Ø 23.2 mm microscope tube to a 1/3” camera sensor using a 0.37x objective, designed for accurate image reduction in microscopy imaging chains 0.37x reduction optics for field control Fits Ø 23.2 mm microscope tubes Optimised for 1/3” camera sensors Standard C‑Mount interface for easy integration Consistent image scale for inspection and documentation The integrated 0.37x lens gives a predictable reduction of the microscope image, helping to match the optical image to a 1/3” sensor without cropping. This optical reduction is especially useful in metrology and quality inspection, where consistent image scale reduces measurement uncertainty and simplifies calibration. By lowering the effective magnification, the adapter enables a wider field of view while maintaining usable resolution, which can speed up visual inspection routines and reduce the need for frequent reticulation of camera settings. Straightforward integration into laboratory and production setups With its C‑Mount interface and compatibility with a Ø 23.2 mm tube, the unit is intended for rapid physical and optical coupling to common microscope stands and camera modules. The mechanical standardisation reduces setup time and avoids custom machining for camera mounting, so imaging systems can be assembled with fewer components. The adapter’s compact design allows it to sit close to the tube port, preserving working distance where space is limited and enabling simpler alignment during system build and routine checks. Practical benefits for everyday microscopy workflows Selecting an adapter that is optimised for a specific sensor size reduces post‑processing workload: less digital cropping and interpolation are required, which preserves image fidelity for documentation and analysis. The device supports repeatable imaging across batches, which is beneficial for process control and traceability in production environments. Where operators are integrating cameras into microscopes for the first time, the adapter removes much of the trial‑and‑error normally associated with matching optics and sensor formats. Robust choice for dependable imaging results The C‑Mount camera adapter is produced to interface reliably with standard microscope tubing and camera threads, contributing to repeatable focus and field alignment over multiple assembly cycles. This mechanical reliability translates into fewer interruptions in inspection workflows and a reduction in the frequency of re‑calibration. When combined with a structured procurement and supply chain, the adapter supports long‑term consistency in imaging setups. Contact Metav Werkzeuge for tailored advice on integrating the DC.1353 into existing systems or for a precise technical comparison with alternative adapters; our Emmerich team can support specification matching and delivery coordination Technical data Article number: DC.1353 Manufacturer: Euromex Product type: Microscope camera adapter Designation: C‑Mount Adapter with 0.37x lens for Ø 23.2 mm tube and 1/3” camera sensor Facts Magnification / reduction: 0.37x Tube diameter compatibility: Ø 23.2 mm Sensor compatibility: 1/3” camera sensor Mount type: C‑Mount Special features Integrated 0.37x objective Designed for microscopy imaging chains Mechanical C‑Mount interface for cameras Compact form factor for close coupling FAQ What is the optical reduction provided by this adapter? The DC.1353 provides a 0.37x optical reduction, enabling a wider field of view on a 1/3” sensor when used with standard microscope tubes. Which tube and sensor sizes is the adapter compatible with? This C‑Mount camera adapter fits a Ø 23.2 mm tube and is optimised for 1/3” camera sensors, ensuring correct imaging geometry for many laboratory cameras. Can the adapter be used with any C‑Mount camera? Yes, the adapter uses a standard C‑Mount interface and is suitable for C‑Mount cameras designed for a 1/3” sensor format, though final image circle and vignetting depend on the camera sensor and optics used. Is the DC.1353 suitable for metrology and inspection applications? The DC.1353 is intended for imaging setups where consistent field‑of‑view and repeatable scaling are required; its 0.37x reduction helps maintain measurement consistency in inspection tasks. Who manufactures the adapter and what is the SKU? The adapter is manufactured by Euromex and is listed under SKU DC.1353 as a microscope camera adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.5x Objective for 1/2” Camera Sensor, 0.5x - Euromex
Take advantage of the precise optical adaptation and wide-field imaging provided by the 0.5x reduction lens and standard C‑Mount interface to streamline digital microscopy workflows; order the adapter directly via Metav Werkzeuge or consult the Metav team for integration advice. Euromex DC.1355 C‑Mount Adapter with 0.5x Objective for Ø 23.2 mm Tube and 1/2″ Camera Sensor The C‑Mount Adapter DC.1355 is a compact microscope camera adapter designed to couple C‑Mount cameras to microscopes with a Ø 23.2 mm tube, optimising field of view for 1/2″ sensor systems. C‑Mount interface for standard cameras 0.5x reduction lens for wider field of view Designed for Ø 23.2 mm tube and 1/2″ sensors Improved imaging throughput with standard interfaces The Euromex C‑Mount Adapter DC.1355 brings a measurable improvement to imaging throughput by combining a C‑Mount interface with a 0.5x objective. The reduction lens halves the effective magnification delivered to a 1/2″ sensor, which increases the observable area without altering the optical path inside the microscope. This compatibility with a common camera mount reduces the need for costly custom couplings and enables reliable, repeatable image capture across inspection, documentation and routine analysis tasks. More useful image area and simpler sensor matching A 0.5x reduction lens is primarily valuable where a larger field of view is required. By lowering the effective magnification, the optical image is spread more evenly across the sensor, resulting in a wider scene capture from the same microscope setup. The result is a more efficient inspection process and fewer image mosaics for overview shots. For teams integrating digital cameras into established optical rigs, this adapter simplifies sensor matching and helps achieve consistent results with 1/2″ camera sensors. Robust mechanical fit for stable imaging Mechanical compatibility is essential for reproducible results in laboratory and industrial settings. The adapter is specified for a Ø 23.2 mm tube, a common standard for many trinocular and photo ports, and employs the industry-standard C‑Mount connection for camera attachment. This combination ensures a secure fit and minimal play between microscope and camera, which supports stable focus and alignment during imaging sequences. Clear mechanical standards reduce setup time and lower the risk of image artefacts caused by misalignment. Practical advantages for labs and inspection benches Integration of a purpose-built adapter reduces setup complexity and supports faster throughput in routine workflows. The device is particularly suited to laboratories, quality control benches and teaching environments where adapting different camera types quickly is necessary. By standardising on a C‑Mount connection and a 0.5x reduction, the adapter helps maintain consistent imaging parameters across multiple stations while keeping the optical chain straightforward to service and recalibrate when required. Contact Metav Werkzeuge for tailored integration advice and to order the Euromex DC.1355 C‑Mount Adapter with 0.5x objective; phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt technical support and supply options Technical data Article number: DC.1355 Brand: Euromex SKU: DC.1355 Product type: microscope camera adapter Core specifications Magnification: 0.5x Tube diameter: Ø 23.2 mm Camera sensor: 1/2″ Special features C‑Mount interface Compatible with Ø 23.2 mm tube Suited to 1/2″ camera sensors FAQ Which camera sensor sizes is this adapter intended for? The Euromex C‑Mount Adapter DC.1355 is specified for use with 1/2″ camera sensors, ensuring optimal projection of the microscope image onto that sensor format. What does the 0.5x magnification mean for captured images? A 0.5x reduction lens halves the effective magnification at the camera, producing a wider field of view on the sensor and reducing the need for image stitching in overview documentation. Which microscope tube does the adapter fit? The adapter is designed to mount to a microscope tube with a diameter of Ø 23.2 mm, a common standard on many photo and trinocular ports. Is the C‑Mount standard used for both industrial and educational cameras? Yes, the C‑Mount interface on DC.1355 supports a wide range of cameras used in industrial inspection and educational microscopy, facilitating straightforward camera swaps. Can this adapter be used for routine quality control imaging? The Euromex DC.1355 is suitable for routine inspection and documentation where a larger field of view and reliable mechanical coupling are required; its configuration is optimised for reproducible imaging workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm C-Mount Adapter 0.5x Objective for 1/2” Camera Sensor, 0.5x Magnification - Euromex
Take advantage of precise 0.5x optics and a C‑mount interface for consistent image scaling in documentation and inspection workflows; the adapter supports Ø 23.2 mm tube mounts and 1/2" camera sensors for broad compatibility. Order the (Euromex C‑Mount adapter with 0.5x objective DC.1324) directly via (Metav Werkzeuge) or ask our consultants if needed. Euromex C‑Mount adapter DC.1324 – 0.5x reduction lens for Ø 23.2 mm tube and 1/2" sensors The Euromex C‑Mount adapter DC.1324 is a purpose‑built microscope camera adapter that reduces image scale by 0.5x, designed for Ø 23.2 mm tube interfaces and 1/2" camera sensors to widen the captured field without compromising alignment. 0.5x magnification for wider field of view Fits Ø 23.2 mm tube systems Compatible with 1/2" camera sensors Wider field of view while keeping measurement integrity The integrated 0.5x reduction lens enlarges the observable area on the camera sensor, enabling faster inspection and clearer documentation. Built as a C‑mount adapter, the accessory preserves the optical axis and maintains focal stability when paired with compatible microscope camera systems. For imaging tasks where a larger field is required—such as sample overviews, quality control checks or assembly inspections—the reduced magnification means fewer images are necessary to cover the same area, improving throughput without additional post‑processing. Simple integration with existing microscope and camera setups Designed for laboratories and workshop metrology, the adapter connects to Ø 23.2 mm tubes and standard C‑mount camera interfaces, so retrofitting is straightforward. The physical compatibility with 1/2" camera sensors ensures that many industrial and educational camera modules can be used without custom spacers. The result is a compact optical link that minimises mechanical adjustments and reduces setup time, supporting efficient workflows and predictable imaging results. Robust accessory for reliable visual documentation As a dedicated microscope camera adapter, the unit focuses on repeatability and mechanical fit. The C‑mount format and the reduction optics contribute to consistent image scale across sessions, which is beneficial for comparative imaging and traceable visual records. For teams standardising imaging procedures, the component reduces variability between operators and setups, supporting quality assurance processes and clearer reporting. Contact Metav Werkzeuge for precise compatibility checks and to arrange purchase of the Euromex C‑Mount adapter DC.1324; call +49 2822 7131930 or email info@metav-werkzeuge.com for expert advice and supply from Emmerich. Technical Data Article number: DC.1324 SKU: DC.1324 Manufacturer: Euromex Facts Magnification: 0.5x Tube diameter: Ø 23.2 mm Camera sensor compatibility: 1/2" Special features C‑mount adapter with 0.5x objective For Ø 23.2 mm tube systems For 1/2" camera sensors FAQ What cameras are compatible with this adapter? The Euromex C‑Mount adapter DC.1324 is compatible with cameras using a C‑mount and 1/2" sensors; selection of camera modules should follow the sensor size and pixel specifications required for the intended inspection task. Will the adapter change the working distance of the microscope objective? The reduction lens alters image scale but maintains the mechanical C‑mount interface; users should verify focus and working distance after installation of the Euromex adapter DC.1324 to ensure the optical configuration meets measurement or imaging needs. Is the adapter suitable for photographic documentation in routine inspections? Yes; the adapter is designed as a microscope camera adapter to provide a wider field of view and consistent image scaling, which is well suited to routine inspection and photographic documentation in laboratory and workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com