40mm iScope IS.7240 Microscope Objective 40x 0.65 NA 0.54 mm Working Distance - Euromex
Take advantage of the combination of 40x magnification, a 0.65 numerical aperture and a short working distance for enhanced detail and contrast in demanding microscopy tasks; order the Euromex objective directly via Metav Werkzeuge or ask our consultants for application advice. iScope IS.7240 — Euromex 40x microscope objective with 0.65 NA iScope IS.7240 is a 40x microscope objective designed for application in education and life‑science microscopy, offering high resolving power and close working distance for fine specimen detail. High magnification 40x for precise detail Numerical aperture 0.65 for improved resolution Short working distance 0.54 mm for close focus Designed for iScope series compatibility Exceptional resolving power for detailed imaging The objective delivers 40x magnification coupled with a numerical aperture of 0.65, which directly improves the system’s ability to resolve fine structural detail. A higher numerical aperture gathers more light and increases the objective’s resolving capacity; in practical terms, this means clearer separation of close features and improved contrast under brightfield illumination. For laboratories and teaching environments that require reproducible visual clarity, the combination of magnification and NA supports more reliable observation and documentation. Close working distance that enables fine specimen access With a working distance of 0.54 mm, the lens is optimised for examinations where subjects need to be observed very close to the optical front element. This geometry is especially useful for thin sections, coverslipped preparations and samples prepared for high‑detail inspection. The short distance requires careful slide handling and proper stage control but delivers benefits in image sharpness at higher magnifications. The optical design balances proximity and performance to maintain image quality while enabling compact optical arrangements. Built for educational and life‑science applications The construction and specification suite of this objective make it suitable for use in education and life‑science settings, as documented in the original product literature (Education and Life Science PDFs). The objective integrates with the iScope model line, providing a consistent optical standard across the series and simplifying objective changes for teaching labs or routine workflows. The robust specification supports repeatable results for instruction, routine imaging and comparative observations, assisting technicians and instructors in delivering dependable microscopy outcomes. For procurement and technical consultation regarding the Euromex iScope IS.7240 microscope objective, contact Metav Werkzeuge in Emmerich for precise ordering guidance and rapid supply coordination. Technical Data Article number: IS.7240 SKU: IS.7240 Brand: Euromex Model series: iScope Product type: Microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.54 mm Special features Designation: S40x/0.65 IOS PLi objective Source references: Education PDF S. 25; Life Science PDF S. 16, 42, 43 Label: iScope IS.7240 microscope objective FAQ What magnification and optical specification does this objective offer? The Euromex iScope IS.7240 microscope objective provides 40x magnification with a numerical aperture of 0.65 (SKU IS.7240), giving a balance of magnification and light‑gathering power for detailed observation. How does a numerical aperture of 0.65 affect image quality? A 0.65 NA increases the objective’s ability to resolve close features and to collect more light, which results in improved contrast and finer detail compared with objectives of lower NA; this benefits tasks requiring precise visual discrimination. What are the implications of a 0.54 mm working distance? A 0.54 mm working distance indicates the specimen must be positioned close to the objective front lens, which supports high sharpness at 40x but requires careful slide handling and accurate stage control to avoid contact. Is this objective suitable for educational and life‑science use? Yes. Documentation associated with the product lists educational and life‑science applications, indicating the objective is specified for routine instructional use and laboratory observation within those fields. Will this objective fit into the iScope series turret or nosepiece? The objective is part of the iScope model series and is specified for compatibility within that product family, facilitating interchange with other iScope objectives for varied magnifications. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm iScope IS.7440 Microscope Objective 40x, 0.34 mm Working Distance, NA 0.75 - Euromex
Take advantage of the combination of 40x magnification, a numerical aperture of 0.75 and a very short working distance of 0.34 mm to achieve high‑resolution imaging in demanding life‑science applications; order directly via Metav Werkzeuge or request tailored advice from our consultants. iScope IS.7440 — microscope objective, 40x, NA 0.75 (Euromex) The iScope IS.7440 microscope objective is a high‑magnification optical unit designed for life‑science microscopy and precision imaging tasks, delivering 40x power with a numerical aperture of 0.75 and a working distance of 0.34 mm. 40x magnification Numerical aperture 0.75 Working distance 0.34 mm Exceptional resolution for detailed imaging The combination of 40x magnification and a numerical aperture (NA) of 0.75 provides a clear advantage where fine structural detail must be resolved. A higher NA increases the light‑gathering capacity of the lens, which directly improves resolution and contrast under brightfield and other transmitted‑light techniques. In practical terms, this optical specification enables sharper images of cellular structures and thin specimen details, reducing the need for excessive digital enhancement and helping to deliver reproducible, measurable results for documentation and analysis. Close working distance explained and its practical benefits A working distance of 0.34 mm means the focal point lies very close to the front lens element. Working distance denotes the gap between the objective tip and the specimen at focus; a short distance favours high‑numerical‑aperture designs and supports improved resolving power. This specification suits thin samples, cover‑slip preparations and high‑resolution inspections where minimal optical path distortion is critical. Note that such a short working distance requires careful sample preparation and handling to avoid contact, but rewards users with superior detail and fidelity in microscopic observation. Designed for seamless integration into microscopy setups Belonging to the iScope series, this objective is specified as S40x/0.75 PLFi in technical documentation and is intended for direct integration with standard microscope nosepieces that accept comparable objective threads and mounting standards. The optical unit’s geometry and performance characteristics make it appropriate for life‑science benches, educational labs that demand advanced detail, and routine imaging tasks in quality control. Compatibility should be confirmed against the local microscope model; the SKU IS.7440 provides an exact reference for ordering and matching components. Built for consistent performance and dependable workflows High‑precision optics are as much about repeatability as they are about peak performance. The lens design and listed specifications support consistent imaging across sessions, which is essential for longitudinal studies, comparative analysis and quality assurance protocols. Combined with Metav’s role as a “quality filter” for the European market, choosing components with clearly stated optical data helps reduce procurement uncertainty and supports predictable laboratory workflows. For further technical clarifications, the original Life Science PDF lists the S40x/0.75 PLFi specification and can be referenced for confirming exact optical parameters. For reliable life‑science imaging with Euromex optics such as the iScope IS.7440, contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Manufacturer: Euromex Article number: IS.7440 SKU: IS.7440 Model series: iScope Product type: Microscope objective Core specifications Magnification: 40x Numerical aperture: 0.75 Working distance: 0.34 mm Source: Life Science PDF (S. 16, 42) Features Designation: S40x/0.75 PLFi objective Category: For microscopes / Microscopy accessory Suitable application: Life‑science microscopy FAQ What level of magnification does this objective provide? The objective offers 40x magnification, delivering detailed enlargement suitable for cellular and thin‑section observation. How does the numerical aperture affect image quality? A numerical aperture of 0.75 increases light collection and resolution; the higher NA improves contrast and fine detail visibility in transmitted‑light techniques. Is the working distance sufficient for routine samples? The working distance of 0.34 mm is short, which is ideal for high‑resolution inspections of thin samples and cover‑slip preparations but requires careful sample handling to prevent contact. Which product reference should be used when ordering or checking compatibility? Use the SKU IS.7440 and the article number IS.7440 as exact references when ordering or verifying compatibility with microscope tube and nosepiece standards. For which applications is this optical unit most suitable? This objective is specified for life‑science microscopy and precision imaging tasks where high resolution and superior detail reproduction are priorities. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Microscope Objective 40x 0.37 mm Working Distance NA 0.65 - Euromex
Take advantage of the 40x magnification, the 0.37 mm working distance and the NA 0.65 to achieve high-resolution imaging in education and routine life-science tasks; order or request advice through Metav Werkzeuge for reliable delivery and specification support. Mikroskopobjektiv iScope IS.7740 — 40x, NA 0.65 (Euromex) The iScope IS.7740 is a 40x microscope objective engineered for close-focus, high-resolution observation in educational and life-science laboratory environments. High 40x magnification for detailed imaging Numerical aperture 0.65 for improved resolution Short working distance 0.37 mm for close focus Compatible with education and life science applications Precision optics for consistent high-resolution imaging The S40x/0.65 PLPH optical design provides a balance between magnification and light-gathering power, delivering high-resolution results for specimens that require fine detail. With a numerical aperture of 0.65, the lens collects more diffracted light than lower-NA alternatives, which directly improves image contrast and resolving power when observing cellular structures or thin tissue sections. The stated working distance of 0.37 mm indicates the separation between the objective tip and the specimen at focus; this short distance enables sharp detail but requires appropriate stage and condenser alignment for safe, repeatable operation. The construction supports routine laboratory and teaching use where optical fidelity is essential. Designed to fit educational and life-science workflows This objective is specified for applications in education and life science contexts, where reliable performance and clarity of image are priorities. The combination of 40x magnification and NA 0.65 helps to reveal intracellular detail and surface texture without the complexity of higher-magnification lens systems. In classroom or routine lab settings, this balance reduces the need for constant reconfiguration while still offering meaningful enhancement over lower-power objectives. Choosing such an optic supports efficient workflow and reproducible observations during demonstrations, student practicals or everyday inspection tasks. Clear technical data to aid specification and procurement Key specifications are stated in the available documentation: 40x magnification, NA 0.65 and a working distance of 0.37 mm (S40x/0.65 PLPH objective). These figures provide an objective basis for selection against performance requirements such as resolution, depth of field and sample clearance. For procurement and inventory purposes, the item is listed under the model series iScope with the article code IS.7740, so compatibility checks with existing turret carriers or objective threads should be carried out where necessary. Where uncertainty remains about fit or optical performance, confirm details with technical documentation or the supplier to ensure the component matches the intended microscope system. Contact Metav Werkzeuge for tailored technical advice and ordering assistance to ensure the IS.7740 meets the laboratory’s optical and mechanical requirements Technical Data Article number: IS.7740 SKU: IS.7740 Brand: Euromex Model series: iScope Product type: Microscope objective Label: Mikroskopobjektiv iScope IS.7740 Numbers / Core technical data Magnification: 40x Working distance: 0.37 mm Numerical aperture: 0.65 Special features / Versions S40x/0.65 PLPH objective Specified for education and life science use Source references: Education PDF S.24; Life Science PDF S.16,41 FAQ What magnification does this objective provide? The Euromex iScope IS.7740 microscope objective provides 40x magnification, suitable for detailed observation in education and life-science settings. What does the 0.37 mm working distance mean in practice? A working distance of 0.37 mm denotes the distance from the objective front to the specimen at focus; the short clearance supports high-detail imaging but requires careful stage control and specimen mounting. How does the numerical aperture of 0.65 affect imaging? A numerical aperture of 0.65 increases light collection and resolution compared with lower-NA objectives, improving contrast and the ability to resolve fine structural detail. Is this objective intended for teaching laboratories? Yes. The specification and documentation list the optic for education and life science applications, making it suitable for classroom demonstrations and routine laboratory observation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Microscope Objective 40x 0.65 NA 0.7 mm Working Distance - Euromex
High-resolution 40x magnification combined with a 0.65 numerical aperture and a tight 0.7 mm working distance delivers detailed, contrast-rich images for inspection and teaching applications; order the AE.5597 directly via Metav Werkzeuge or consult our specialists for technical alignment with existing equipment. AE.5597 — Euromex microscope objective, 40x, NA 0.65 The AE.5597 is a 40x microscope objective engineered for close-field observation and educational or laboratory inspection tasks. 40x high-resolution magnification Numerical aperture 0.65 for improved contrast 0.7 mm working distance for close specimens Euromex precision optics and reliable build Precise imaging where detail matters The combination of 40x magnification and a numerical aperture of 0.65 provides a measurable increase in resolving power and image contrast compared with lower-NA lenses. This optical performance is particularly beneficial for material inspections, routine laboratory checks and teaching demonstrations where distinguishing fine structure is essential. The design emphasises consistent image quality and repeatable results, supporting efficient workflows and reducing the need for post-processing of images. What the optical specifications mean in practice A numerical aperture (0.65) determines the objective’s ability to gather light and resolve fine detail; higher NA yields better resolution and shallower depth of field. The 0.7 mm working distance indicates the clearance between the front lens and the specimen at focus, allowing observation of very small or low-profile samples. For practical purposes, these parameters mean the lens is optimised for high-detail surface observation rather than deep, thick specimens. Technically minded teams will value the clear trade-off between resolution and working distance when specifying objectives for inspection rigs or teaching microscopes. Integration, suitability and practical benefits Designed as a straightforward optical component, the lens offers Euromex build quality and is suitable for educational laboratories, quality-control benches and other microscope-based inspection stations. The compact optical geometry simplifies storage and handling while delivering consistent performance across comparable setups. If further clarification is required on compatibility with existing nosepieces or camera adapters, technical data and procurement support are available; Metav Werkzeuge provides rapid advisory service and supply from Emmerich to help match optics to system requirements. For procurement or technical advice on Euromex precision optics, contact Metav Werkzeuge GmbH by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 for fast delivery and specification assistance. Technical data Article number: AE.5597 SKU: AE.5597 Brand: Euromex Product type: Microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.7 mm Special features S40x/0.65 SMP objective (as referenced in product documentation) Label: Mikroskopobjektiv AE.5597 Category path: Microscopy accessories > Objectives > For microscopes FAQ What magnification does this objective provide? The lens delivers 40x magnification, suitable for high-detail observation in laboratory and teaching contexts. How does the numerical aperture affect image quality? The 0.65 numerical aperture increases light-gathering and resolution, producing sharper, higher-contrast images than lower-NA alternatives. What does a 0.7 mm working distance imply for sample handling? A 0.7 mm working distance means the objective focuses very close to the specimen surface, ideal for thin or low-profile samples but requiring careful handling to avoid contact. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Microscope Objective 40x 0.7 mm Working Distance NA 0.75 - Euromex
Take advantage of the combination of 40x magnification, a numerical aperture of 0.75 and a compact 0.7 mm working distance to obtain clear, high‑resolution images in demanding laboratory applications; order optics and advisory support directly via Metav Werkzeuge for dependable delivery and specification assistance. Delphi‑X Observer DX.7340 microscope objective by Euromex — 40x, NA 0.75 The Delphi‑X Observer DX.7340 is a 40x microscope objective tailored for life‑science and laboratory imaging, delivering a high numerical aperture for enhanced detail and contrast in close‑focus applications. 40x magnification for detailed observation High numerical aperture 0.75 for superior resolution 0.7 mm working distance for close focusing Designed for Delphi‑X Observer series by Euromex Improved image detail where it matters most The combination of 40x magnification and a numerical aperture of 0.75 provides a tangible benefit for routine and precise inspection tasks: finer structural detail and improved light collection. The numerical aperture describes the objective’s ability to gather light and resolve fine features; a higher value increases resolving power and depth of field in high‑magnification imaging. For laboratories requiring consistent optical performance, this objective delivers high resolution while maintaining reliable contrast, helping to reveal subcellular structures and subtle sample features that lower‑NA optics can miss. Compact working distance for dense setups and fine‑detail work With a 0.7 mm working distance, this objective is optimised for applications that need close proximity between lens and specimen, such as high‑detail surface inspection or tightly constrained sample holders. Working distance is the physical gap between the front lens and the specimen at focus; a short distance enables higher numerical apertures and thus better resolution, though it requires attention to sample preparation and stage clearance. For compact microscopes and systems with limited headroom, the objective’s geometry supports integration without compromising optical throughput or image quality. Consistent optical specification and series compatibility The objective is specified as S40x/0.75 PL‑SAFi in source documentation, reflecting its optical design and intended performance class. Manufactured by Euromex for the Delphi‑X Observer range, the lens is aligned to industry expectations for laboratory objectives in this magnification band. The documented parameters (magnification, working distance, numerical aperture) allow straightforward comparison with alternative optics and support predictable imaging outcomes — a practical advantage when standardising instruments across a workshop or research facility. Practical integration advice and application scope This microscope objective suits life‑science imaging and microscopy workflows that prioritise resolution over long working distance, such as detailed cell imaging or inspection of small components. When integrating the lens, ensure stage and condenser configurations accommodate the short 0.7 mm working distance and verify mechanical mounting matches the host microscope’s objective turret. If additional technical data or compatibility checks are needed, specification support is available to confirm fit and optical alignment before procurement. For precision imaging with Euromex optics, contact Metav Werkzeuge for tailored advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering information. Technical data Manufacturer article number: DX.7340 SKU: DX.7340 Label: Mikroskopobjektiv Delphi‑X Observer DX.7340 Product type: Mikroskopobjektiv Manufacturer: Euromex Model series: Delphi‑X Observer Core data Magnification: 40x Working distance: 0.7 mm Numerical aperture: 0.75 Special features S40x/0.75 PL‑SAFi objective (source: Life Science PDF) Category: For microscopes (microscopy accessories → objectives) Description: Mikroskopobjektiv Delphi‑X Observer DX.7340 FAQ What magnification does the objective provide? The objective provides 40x magnification, suitable for high‑detail laboratory imaging with the Delphi‑X Observer series. What is the numerical aperture and why does it matter? The numerical aperture is 0.75; a higher numerical aperture increases light collection and resolving power, so the DX.7340 delivers improved detail and contrast compared with lower‑NA lenses. How close can the lens focus to the sample? The working distance is 0.7 mm, which enables higher resolution but requires sufficient stage clearance and careful sample preparation when using the DX.7340 objective. Is this objective compatible with standard microscope turrets? The DX.7340 is designed for the Delphi‑X Observer series and similar microscope configurations; verify turret thread and mounting specifications if integration with another system is planned. Where do the specification values originate? Key values such as magnification, working distance and numerical aperture are specified in source documentation (Life Science PDF) for the S40x/0.75 PL‑SAFi class, as referenced for the DX.7340. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Objective 40x 0.45mm Working Distance NA 0.65 - Euromex
Take advantage of 40x magnification, a 0.45 mm working distance and a numerical aperture of 0.65 to improve image detail and inspection speed; order the microscope objective directly via Metav Werkzeuge or contact the consultants for technical advice. iScope IS.7140 microscope objective — 40x, NA 0.65 (Euromex) A compact iScope IS.7140 microscope objective engineered for routine microscopy tasks and educational use, offering high-resolution imaging with a short working distance for close specimen inspection. 40x magnification for detailed observation 0.45 mm working distance for close-up imaging Numerical aperture 0.65 for improved resolution Euromex quality; model IS.7140 Enhanced resolution and image contrast for routine inspection The 40x magnification combined with a numerical aperture of 0.65 delivers noticeably higher resolving power compared with lower-NA objectives, making fine structural details easier to discern during material inspections or biological observations. In practical terms, a larger numerical aperture permits the objective to collect more light and resolve smaller features; this translates into clearer, sharper images on the eyepiece or camera, improving throughput where accurate visual assessment matters. The construction emphasises optical performance while remaining suitable for everyday laboratory and teaching environments. Close working distance tailored to precise sample handling A 0.45 mm working distance indicates that the lens must be positioned close to the specimen to achieve focus; this design is ideal for thin preparations and high-detail work where proximity to the sample enhances contrast and clarity. For users new to the term: working distance is the physical gap between the objective front lens and the specimen surface when the image is in focus. A short working distance requires careful stage control but rewards with better light collection and finer apparent detail, which benefits inspection tasks that prioritise visual accuracy over deep-field clearance. Compatibility and application in microscopy setups Designed as a microscope objective for standard microscope optical trains, the lens is categorised for use with microscopes and integrates into educational and routine laboratory workflows. The specification S40x/0.65 EPL (as referenced in technical documentation) indicates an objective optimised for efficient imaging under common brightfield conditions. The technical profile supports faster evaluation cycles and consistent image quality, making the component a pragmatic choice for laboratories that balance performance with straightforward operation. Practical handling, maintenance and operational tips Due to the short working distance and optical precision, careful handling is advised when changing or positioning the objective. Regular cleaning of external optics with appropriate lens tissue and solvent preserves image quality; avoid contact with the lens surface and ensure the stage is stable before lowering the objective. For users who require assistance interpreting the numerical data or integrating the objective into an optical system, technical documentation and reference notes are available that explain the values and their practical implications for everyday microscopy tasks. For reliable procurement and technical guidance, contact Metav Werkzeuge to arrange supply of the Euromex IS.7140 objective and to discuss compatibility with existing equipment; info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.7140 Manufacturer: Euromex Model series: iScope Product type: Microscope objective SKU: IS.7140 Data Magnification: 40x Working distance: 0.45 mm Numerical aperture: 0.65 Designation in docs: S40x/0.65 EPL objective Special features Intended application: for microscopes Source references: Education PDF; Life Science PDF Compact design for routine and educational use FAQ What magnification does this objective provide? The Euromex IS.7140 objective provides 40x magnification, suitable for detailed observation in routine microscopy. What does a numerical aperture of 0.65 mean for image quality? A numerical aperture of 0.65 indicates improved light-gathering and resolving capability; the IS.7140 objective benefits from sharper detail and better contrast compared with lower-NA lenses. Is the short working distance a limitation for all samples? A 0.45 mm working distance requires careful stage control and is best suited to thin or low-profile samples rather than thick specimens that need more clearance. Can this objective be used in teaching laboratories? Yes. The optical characteristics of the IS.7140 make it well suited for educational settings where clear resolution of structure and repeatable results are important. Where can technical documentation for the objective be found? Reference data such as "S40x/0.65 EPL objective" and further specifications are noted in the product PDFs cited in the technical documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Objective 40x 0.65 NA 0.65 mm Working Distance - Euromex
Taking advantage of 40x magnification combined with a 0.65 numerical aperture delivers a compact objective that balances resolution and light-gathering for demanding routine work; pair this optical performance with supply from Metav Werkzeuge for dependable delivery and product support. BioBlue.Lab BB.8840 — Microscope objective, 40x, 0.65 NA (Euromex) The BioBlue.Lab BB.8840 is a 40x microscope objective designed for education and life-science applications, offering a short working distance and a high numerical aperture for detailed imaging. 40x magnification for detailed imaging Numerical aperture 0.65 for improved resolution 0.65 mm working distance for close-focus samples PL designation for flat-field correction Precision optics that improve image detail and contrast The objective delivers a combination of 40x magnification and numerical aperture 0.65 that improves resolution and contrast for fine structural detail. A higher numerical aperture increases light collection, which helps to resolve closely spaced features and reduces exposure times under transmitted illumination. This means clearer images when examining stained slides or small biological specimens, with the optical parameters tailored to yield consistent performance in routine lab workflows. Designed for close-focus tasks in teaching and life-science labs A working distance of 0.65 mm places the front lens close to the specimen, which is advantageous for thin preparations and high-detail observation. The short working distance assists when using immersion media or when precise condenser alignment is required. For training environments and general laboratory use, the combination of magnification and aperture makes the objective suitable for common techniques without requiring specialist accessories, while still delivering the clarity expected in life-science education. Optical correction and handling considerations for reliable results Marked with the PL designation, the objective is intended to provide a corrected, flat field across the image plane, reducing curvature and improving edge-to-edge sharpness. This supports image analysis and documentation where uniform focus across the field is important. Although compact in form, the optical design emphasises consistent imaging performance; sensible handling and correct optical alignment will ensure stable, reproducible results in both analogue observation and digital imaging setups. Practical compatibility and workflow benefits The construction and specification make this objective an efficient choice for standard upright microscopes used in teaching and routine laboratory work. Its optical parameters favour samples that benefit from increased light gathering and high spatial resolution. When integrated into established microscopy systems, the objective contributes to a streamlined workflow by reducing the need for repeated focusing and allowing faster, more confident inspection of specimens during teaching sessions or basic life-science investigations. Contact Metav Werkzeuge for tailored advice on supply and compatibility of the Euromex BioBlue.Lab BB.8840 — email info@metav-werkzeuge.com or call +49 2822 7131930 to secure reliable delivery from Emmerich. Technical data Article number: BB.8840 SKU: BB.8840 Manufacturer: Euromex Series: BioBlue.Lab Product type: Microscope objective Specifications Magnification: 40x Working distance: 0.65 mm Numerical aperture: 0.65 Special features S40x/0.65 PL objective Intended for education and life science Marking: PL designation for flat-field correction FAQ What level of detail can be expected with this objective? The BioBlue.Lab BB.8840 achieves high detail at 40x magnification aided by a 0.65 numerical aperture, enabling clear resolution of fine structures in standard stained or unstained preparations. Is the short working distance a limitation for routine use? A working distance of 0.65 mm is intentionally short to support close-focus tasks; the Euromex objective performs well with thin samples and properly adjusted condenser settings. Which applications are most suitable for this objective? The objective is well suited to education and general life-science microscopy, where a balance of magnification, resolution and a flat field is required for teaching, inspection and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Objective 40x 0.65 NA 1.5mm Working Distance, S40x/0.65 PLi - Euromex
Take advantage of the combination of high optical performance and a compact working distance for precise, high‑contrast imaging; order the component directly via Metav Werkzeuge or consult the technical advisors for system integration if needed. Achios‑X Observer AX.7240 microscope objective — 40x magnification, NA 0.65, short working distance (Euromex) The Achios‑X Observer AX.7240 microscope objective is a 40x lens designed for applications requiring high detail and strong light collection in close‑proximity observations 40x magnification for detailed observation Numerical aperture 0.65 for improved resolution Working distance 1.5 mm for close specimen access High-resolution imaging enabled by strong optical aperture With a 40x magnification combined with a numerical aperture (NA) of 0.65, this objective delivers improved resolving power and better light‑gathering compared with lower‑NA lenses. A higher numerical aperture increases the amount of light that reaches the image plane, which results in clearer contrast and finer detail in the focal plane. This benefit is particularly relevant for inspections where distinguishing small structural features is essential; the optical specification therefore supports efficient image acquisition and more reliable visual analysis. Short working distance for thin specimens and high‑detail inspection The 1.5 mm working distance is a defining characteristic of this design and suits tasks that require close optical access to a specimen, for example thin sections, coverslip preparations and fine surface inspection. A reduced working distance contributes to a compact optical path and helps maintain high numerical aperture performance at elevated magnifications. Operators should account for the proximity when planning sample mounting and objective switching, since the near field favours delicate or precisely positioned specimens rather than bulky samples. Practical compatibility and application orientation As a member of the Achios‑X series, the objective is engineered for microscope setups where high resolution and compact optics are priorities. The lens is intended for optical microscopes requiring standard objective integration; selection of the correct tube lens and system parfocality will preserve the stated optical performance. Reference data for system integration is provided in the original Life Science documentation and should be consulted when precise optical parameters or compatibility with specialised stands are required. Handling and care to retain optical performance Maintaining the condition of the front element and preserving the alignment of the optical assembly extends service life and conserves image quality. Regular inspection, dust protection when not in use and gentle cleaning with approved optical solvents and lens tissue will prevent contamination and scratches. Proper handling during mounting and avoiding contact with the front lens element will sustain the numerical aperture and preserve the 40x performance for routine microscopy tasks. For direct procurement or technical advice regarding integration of the Euromex Achios‑X Observer AX.7240 objective, contact Metav Werkzeuge for prompt supply from Emmerich and tailored consultation: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: AX.7240 Manufacturer: Euromex Model series: Achios‑X Observer Product type: microscope objective SKU: AX.7240 Facts Magnification: 40x Working distance: 1.5 mm Numerical aperture: 0.65 Special features S40x/0.65 PLi objective Source: Life Science PDF S. 21,46 Category: For microscopes (microscopy accessories, objectives) FAQ What magnification does this objective provide? The Achios‑X Observer AX.7240 provides a 40x magnification, specified for detailed specimen observation. What does numerical aperture 0.65 mean in practice? A numerical aperture of 0.65 indicates a relatively high light‑gathering capacity for this magnification, improving resolution and contrast in the focal plane for the AX.7240 objective. Which specimen types are best suited to the short working distance? Specimens such as thin sections and coverslip‑mounted preparations benefit from the 1.5 mm working distance of the AX.7240, where close optical access enhances detail capture. How should the objective be cleaned and stored? Cleaning should be performed with appropriate optical cleaning fluid and lens tissue; the objective must be stored in a dust‑free environment and protected by caps to preserve optical performance. Is the objective part of a series that supports system matching? Yes, the lens belongs to the Achios‑X Observer series, designed for applications where high resolution in a compact optical package is required; consult system documentation for exact matching parameters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Objective 40x 0.78mm Working Distance NA 0.65 - Euromex
Take advantage of the 40x magnification, 0.65 numerical aperture and 0.78 mm working distance for high-detail observation in laboratory and educational settings; order the Euromex bScope BS.8240 directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.8240 microscope objective — 40x, NA 0.65 (Euromex) bScope BS.8240 is a microscope objective intended for high-resolution transmitted-light microscopy, offering a balance between magnification and light-gathering capacity for routine laboratory use. 40x high magnification Numerical aperture 0.65 for detail Working distance 0.78 mm High-definition imaging for routine microscopy The optical design delivers 40x magnification combined with a numerical aperture of 0.65, which increases the amount of light collected from the specimen and directly improves resolving power. In practical terms, this combination enables clearer distinction of fine structures while keeping image contrast suitable for brightfield applications. The specification NA 0.65 indicates robust light-gathering ability compared with lower-NA objectives, so smaller features become visible without resorting to extreme illumination settings. Compact working distance for close observation A working distance of 0.78 mm suits close-range observation and high-magnification tasks where sample proximity is required. This short distance is common for objectives optimised for high resolution; it allows the objective to form sharp images of thin specimens on standard slides. When planning sample handling or mounting, the 0.78 mm parameter should be considered to avoid contact with coverslips or immersion media and to select compatible condensers and mounts. Practical benefits in education and routine labs The objective, from the bScope series, is appropriate for teaching laboratories and routine analysis where consistent, reliable optics are essential. The optical characteristics make it suitable for observation of histological sections, cellular detail in prepared slides, and other standard transmitted-light specimens. The specification balance reduces the need for frequent objective changes while supporting a wide range of classroom and workshop tasks. Understanding numerical aperture and image quality The numerical aperture (NA 0.65) determines both resolution and depth of field: a higher NA sharpens lateral resolution but narrows the depth of focus. For applications requiring maximal detail in a narrow focal plane, this objective provides a clear advantage. Conversely, when increased depth of focus is desired, contrast-enhancing techniques or alternative objectives with lower NA can be considered. The objective’s design is therefore a deliberate compromise to favour high-resolution detail in standard microscopy workflows. For application advice or to source the Euromex bScope BS.8240 for laboratory use, contact Metav Werkzeuge GmbH in Emmerich; technical consultants are available to discuss suitability and integration into existing microscope setups Technical data Article number: BS.8240 SKU: BS.8240 Brand: Euromex Series: bScope Type: Microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.78 mm Special features Objective type: S40x/0.65 IOS EPLi Application: For microscopes Intended use: Laboratory and educational microscopy FAQ What magnification does this objective provide? The Euromex bScope BS.8240 provides 40x magnification, suitable for detailed observation of prepared slides. How does the numerical aperture affect performance? With a numerical aperture of 0.65, the BS.8240 increases light collection and resolution, improving the visibility of fine specimen details under transmitted-light conditions. Is the working distance suitable for standard slides? The 0.78 mm working distance is designed for close-range imaging of thin specimens on standard slides; care with coverslip thickness and immersion media is recommended. Which applications match this objective? The objective is well suited to teaching laboratories and routine analyses where high-resolution transmitted-light microscopy is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Objective iScope IS.8840 40x, 0.43 mm Working Distance, NA 0.65 - Euromex
Take advantage of 40x magnification, a 0.65 numerical aperture and a precise 0.43 mm working distance to obtain high-detail images in routine laboratory and teaching environments; order directly via Metav Werkzeuge or consult Metav's technical advisers for integration and supply. iScope IS.8840 — Euromex 40x microscope objective, NA 0.65, WD 0.43 mm The iScope IS.8840 is a 40x microscope objective designed for high-resolution imaging in education and life-science microscopy, providing a balance of detail and light-gathering for bright-field applications. 40x high-power magnification Numerical aperture 0.65 for high resolution Short working distance 0.43 mm Compatible with iScope series objectives Capture finer detail with a high numerical aperture With 40x magnification paired to a 0.65 numerical aperture, this objective is tailored to deliver high resolution and improved contrast for small structural details. The numerical aperture expresses the lens's light-gathering ability and directly affects the achievable resolving power; a 0.65 NA therefore supports sharper images and more reliable differentiation of adjacent features. For laboratory managers and instructors, this means clearer visual results on cellular and tissue specimens without resorting to excessive digital enhancement. Optimised for demanding focus positions and delicate samples The 0.43 mm working distance reflects the optical design prioritising numerical aperture and resolution. A short working distance benefits high-NA performance by positioning the front lens close to the specimen, which enhances detail capture in thin preparations. This configuration is suitable for typical slide-based samples and requires careful stage and condenser alignment. The objective follows the S40x/0.65 EPLi specification and integrates into the iScope series, enabling straightforward replacement or upgrade within compatible Euromex setups while maintaining optical consistency across a microscope fleet. Practical integration for teaching and life-science workflows Engineered for microscopes used in education and routine life-science tasks, this objective combines precise optics with robust manufacturing to support frequent handling and repeated use. The lens specification is documented in manufacturer materials (see Education PDF S.24; Life Science PDF S.16,41), allowing procurement and technical teams to verify compatibility and imaging expectations before purchase. For facilities consolidating suppliers, the objective provides predictable performance for lab benches, training rooms or multi-user microscopes, reducing downtime and simplifying standardisation across instruments. Secure precision imaging with the Euromex iScope IS.8840 through Metav Werkzeuge — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and timely supply Technical data Article number: IS.8840 SKU: IS.8840 Manufacturer: Euromex Product type: Microscope objective Model series: iScope Core specifications Magnification: 40x Numerical aperture: 0.65 Working distance: 0.43 mm Objective code: S40x/0.65 EPLi Features & application Suitable for microscopes Education and life-science applications Compatible with iScope series Datasheet references: Education PDF S.24; Life Science PDF S.16,41 FAQ What magnification does this objective provide? The iScope IS.8840 provides 40x magnification, designed to reveal fine structural detail in standard slide preparations. How does the numerical aperture influence image quality? A 0.65 numerical aperture increases light-gathering and resolving power; the iScope IS.8840 benefits from this by delivering clearer, higher-contrast images compared with lower-NA objectives. Is the 0.43 mm working distance suitable for routine slides? The 0.43 mm working distance supports high-NA imaging but requires careful specimen preparation and stage adjustment; thin coverslips and precise focusing are recommended for optimal results with the iScope IS.8840. Which microscopes is this objective compatible with? This objective is designed for standard microscope mounts and integrates with the iScope series and comparable Euromex optical systems; confirmation against the instrument's nosepiece and parfocal settings is advised. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Plan Phase Contrast PLPHi S40x/0.65 IOS Objective 0.5mm Working Distance, 0.17mm Cover Glass Corrected - Euromex
Data error — the manufacturer "Euromex" is not listed in the authorised manufacturer directory; as a result, it is not possible to generate the product description or provide any further details about the item in question, as the absence of this manufacturer from the directory indicates that it may not meet the necessary criteria or standards required for inclusion, which could potentially raise concerns about the product's authenticity, compliance, or overall quality, and therefore, additional verification or clarification from the relevant authorities or sources may be required to resolve this issue and ensure accurate information is provided.
40mm Plan Stress-Free PLPOLi 40x/0.60 IOS Transmission Polarisation Objective 0.54mm Working Distance, 0.17mm Cover Glass Corrected - Euromex
Take advantage of the 40x high-resolution magnification and the plan, stress-free optical design for reliable polarisation imaging; the corrected cover-glass specification and short working distance ensure sharp results on thin specimens. Order directly via Metav Werkzeuge or request technical advice from our consultants if further specification data is required. Plan stress-free PLPOLi 40x/0.60 IOS objective for iScope — polarisation, 0.54 mm WD (IS.7940-T) Plan stress-free PLPOLi 40x/0.60 IOS Objective for transmitted-light polarisation on iScope systems, corrected for a 0.17 mm cover glass and engineered for high-detail observation with a 0.54 mm working distance Plan, stress-free optical design 40x magnification for detailed imaging Corrected for 0.17 mm cover glass For iScope transmitted-light polarisation Precision optics for confident polarisation analysis The PLPOLi 40x objective combines a plan, stress-relieved lens design with a numerical aperture of 0.60, delivering a well-corrected flat field that reduces image curvature across the visual plane. This results in consistently sharp, undistorted images at the edges as well as the centre, which is essential for quantitative inspection and documentation. The optical layout minimises residual stress birefringence, so polarisation contrast is preserved and sample artefacts are reduced. Such stability supports reproducible imaging in both routine quality control and research applications. Short working distance and cover-glass correction explained A working distance of 0.54 mm indicates the clearance between the front lens and the specimen when in focus; this enables high numerical aperture performance while keeping the optical path compact. The objective is corrected for a 0.17 mm cover glass, which compensates optical aberrations introduced by standard cover slips and maintains focal accuracy when observing mounted samples. In practice, this means fewer refocusing steps and improved image sharpness for thin sections and mounted preparations, enhancing throughput and measurement reliability. Built for iScope transmitted-light polarisation and easy integration Designed specifically for iScope transmitted-light polarisation systems, the objective ensures mechanical and optical compatibility with the platform. The plan, stress-free construction and polarisation-optimised glass make it well suited to mineralogy, petrography and materials analysis where polarised light reveals internal structure. The compact optical footprint supports standard laboratory workflows and fits easily into multi-objective nosepieces, allowing fast switching between magnifications with minimal alignment effort. For precise work where optical integrity matters, this objective provides a dependable upgrade to a microscopy setup. Discuss polarisation optics and application fit with Metav Werkzeuge — reference IS.7940-T for exact compatibility checks and ordering assistance Technical data Article number: IS.7940-T Product type: microscope objective Manufacturer: Euromex Facts Magnification: 40x Numerical aperture: 0.60 Working distance: 0.54 mm Cover glass correction: 0.17 mm Special features Plan, stress-free optics Polarisation for transmitted-light microscopy Compatible with iScope systems SKU: IS.7940-T FAQ What makes a plan, stress-free objective different from a standard lens? A plan, stress-free objective is designed to deliver a flat field across the image and to minimise internal stress birefringence; the Plan stress-free PLPOLi 40x/0.60 IOS objective (IS.7940-T) preserves polarisation contrast and reduces artefacts for clearer transmitted-light imaging. Is this objective suitable for polarised-light mineralogy and materials analysis? Yes, the PLPOLi 40x objective is optimised for transmitted-light polarisation, making it suitable for mineralogical thin sections and materials diagnosis where polarisation reveals structural details. How does the 0.17 mm cover-glass correction affect everyday use? Correction for a 0.17 mm cover glass compensates optical shifts caused by standard cover slips, maintaining focus and image quality on mounted specimens without repeated optical adjustments. Will the working distance of 0.54 mm limit sample sizes or manipulations? A 0.54 mm working distance is typical for high-NA, high-magnification objectives and allows fine control for thin or mounted samples; bulkier specimens requiring larger clearance will need lower-magnification objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm S40x/0.75 Objective 40x, 1.35 mm Working Distance, NA 0.75 - Euromex
Take advantage of the combination of 40x magnification, a high numerical aperture (0.75) and a compact working distance (1.35 mm) for sharp, high-resolution imaging in demanding laboratory applications. Order the objective directly via Metav Werkzeuge or consult our specialists for suitability and integration. Achios‑X Observer AX.7340 microscope objective by Euromex — 40x, NA 0.75 The Achios‑X Observer AX.7340 is a precision microscope objective designed for high-magnification imaging and demanding sample observation in laboratory environments. 40x magnification, high detail resolution Numerical aperture 0.75 for improved contrast Working distance 1.35 mm for close-sample imaging S40x/0.75 PL-SAFi optical specification Exceptional resolution for critical inspection and research The combination of 40x magnification and a numerical aperture of 0.75 delivers increased resolving power and light-gathering capability compared with lower-NA objectives. This optical performance helps to reveal fine structural detail in stained sections or intricate microstructures while maintaining good image contrast. The designation S40x/0.75 PL-SAFi indicates the optical correction and specification used during design and quality control, ensuring consistent image flatness and minimal aberration across the field of view. For laboratories requiring dependable high-magnification observation, these parameters translate directly into clearer, more reproducible imaging results. Designed for samples that permit close approach and fine detail work A working distance of 1.35 mm indicates the objective is intended for specimens that allow a close proximity of the lens to the sample, such as mounted slides and thin sections. This compact working distance supports high-NA performance by shortening the optical path between the specimen and the front lens element, which is why the combination of 1.35 mm and 0.75 NA suits applications where fine lateral resolution is needed. When planning a setup, ensure that sample mounting and coverslip thickness are compatible with the limited clearance to avoid contact and to preserve both specimen and optics. Trusted optics and supply for consistent laboratory workflows Euromex optical engineering underpins the Achios‑X Observer series, supporting stable performance and repeatable results over time. Sourcing through Metav Werkzeuge provides the practical benefits of organised European distribution, inventory oversight and a quality filter that helps reduce procurement risk. Metav’s positioning as a precision partner for industry and trade—backed by a broad product range and established logistics—supports uninterrupted access to measurement and laboratory equipment. For additional technical clarification on optical correction or integration within a specific microscope turret, the available product documentation summarises the technical values and compliance data. Contact Metav Werkzeuge for an application consultation or to reserve the Euromex Achios‑X Observer AX.7340 for the laboratory; call +49 2822 7131930 or email info@metav-werkzeuge.com for precise compatibility advice and supply options Technical Data Article number: AX.7340 SKU: AX.7340 Manufacturer: Euromex Series: Achios‑X Observer Product type: Microscope objective Facts Magnification: 40x Working distance: 1.35 mm Numerical aperture: 0.75 Special features S40x/0.75 PL-SAFi objective specification For microscopes (objective category) Optimised for high-resolution slide imaging FAQ What magnification and resolution can be expected from this objective? The Achios‑X Observer AX.7340 provides 40x magnification with a 0.75 numerical aperture, offering enhanced resolving power for detailed inspection in microscopy applications. Is the short working distance suitable for my sample type? A working distance of 1.35 mm is well suited to mounted slides and thin specimens; however, thicker preparations or non‑mounted samples may require objectives with greater clearance. Does the AX.7340 require special mounting or coverslip thickness? The AX.7340 is optimised for standard slide-mounted preparations; maintaining the recommended coverslip thickness and careful sample mounting preserves optical performance and prevents contact with the front element. Can this objective be fitted into standard turret systems? The Achios‑X Observer series is manufactured to standard objective dimensions used in many microscopes, enabling turret integration where mechanical fittings and parfocal distances are compatible. What does the PL-SAFi designation mean for image quality? The PL-SAFi notation reflects the objective’s optical correction and specification aimed at reducing field curvature and aberrations, contributing to a flatter field and improved image uniformity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Microscope Objective 0.6 mm Working Distance NA 0.85 - Euromex
Take advantage of the 40x magnification and high numerical aperture (0.85) for improved detail and contrast in routine life‑science imaging; the short 0.6 mm working distance makes the objective ideal for close-focus preparations. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Microscope objective 86.556 — Euromex 40x, NA 0.85 The Microscope objective 86.556 is a 40x objective designed for high‑resolution microscopy applications, offering a large numerical aperture and a short working distance suitable for detailed sample observation 40x magnification for detailed imaging High numerical aperture 0.85 for improved resolution Short 0.6 mm working distance for close-focus samples High numerical aperture for clearer, higher‑contrast images A numerical aperture of 0.85 noticeably increases the objective's ability to gather light and resolve fine detail, which is critical when analysing cellular structures or fine surface features. In practical terms, the elevated NA translates into sharper images and better contrast under moderate illumination, helping to reduce exposure time and improve throughput in repetitive inspection tasks. For laboratories seeking reliable optical performance, this characteristic supports consistent results across routine and advanced examinations. Forty‑times magnification tailored for life‑science observations With a 40x magnification, the objective provides the balance between field of view and detail that many biological and materials investigations require. This level of enlargement is well suited to studies where subcellular features or microstructural details must be inspected without switching frequently between objectives. The optical design preserves image flatness and clarity across the central field, enabling efficient documentation and measurement workflows with standard microscope camera systems. Short working distance: benefits and practical considerations The 0.6 mm working distance indicates that the lens focuses very close to the specimen plane, which offers advantages when working with thin preparations or coverslipped slides where high‑resolution contact is needed. At the same time, the small separation necessitates careful sample handling and precise stage control to avoid collisions. For applications requiring mechanical probes or thicker specimens, assess compatibility with sample holders and consider whether a longer‑WD objective is required; for thin sections and high‑detail inspection, the compact focus depth is a practical asset. Contact Metav Werkzeuge today for tailored advice on integrating the Euromex 86.556 into existing microscope setups and to check compatibility with camera systems and stage configurations Technical data Article number: 86.556 SKU: 86.556 Manufacturer: Euromex Product type: Microscope objective Label: Mikroskopobjektiv 86.556 UID: 86.556 Facts Magnification: 40x Working distance: 0.6 mm Numerical aperture: 0.85 Source: Life Science PDF, p. 39 Special features PLF S40x/0.85 PLFi objective WD 0.6 mm Designed for high‑resolution life‑science microscopy Suitable for close‑focus sample preparations FAQ What does the numerical aperture 0.85 mean for image quality? A higher numerical aperture, as in the Euromex 86.556 objective, increases the lens's light‑gathering power and resolving capability, resulting in finer detail and improved contrast under comparable illumination. How does the 0.6 mm working distance affect sample handling? The 0.6 mm working distance of this objective requires precise stage control and careful specimen preparation, since the lens focuses very close to the cover slip or specimen surface. Is this objective suitable for routine life‑science applications? Yes, the 40x magnification combined with a high numerical aperture makes the lens well suited to many routine life‑science inspections where detailed cellular or microstructural observation is required. Can standard microscope cameras be used with this objective? Standard camera systems designed for transmitted or reflected light microscopy are commonly compatible; check camera sensor size and tube optics to ensure the desired field of view and resolution when paired with this objective. Where can detailed technical specifications be verified? Detailed optical data and official specifications are available in the manufacturer's documentation; the listed values in product literature include magnification 40x, NA 0.85 and WD 0.6 mm Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Microscope Objective 0.65 NA, S40x/0.65 - Euromex
Benefit from the combination of 40x magnification and a numerical aperture of 0.65 for clear, high‑resolution observation in routine laboratory and educational workflows; order the MicroBlue MB.7040 directly via Metav Werkzeuge or request advice from our consultants. MicroBlue MB.7040 — Microscope objective, 40x magnification, NA 0.65 (Euromex) The MicroBlue MB.7040 is a 40x microscope objective designed to deliver enhanced resolution and light-gathering capability for brightfield and general laboratory observation. 40x magnification for detailed observation Numerical aperture 0.65 for improved resolution Part of the MicroBlue objective series Euromex optical quality and consistency Improved detail and resolution for demanding visual tasks With a numerical aperture (NA 0.65), this optical element increases the amount of light collected from the specimen, which directly improves resolution and image contrast. The higher NA reduces diffraction limits, allowing finer structures to be distinguished at 40x magnification. In practical terms, the objective supports clearer visual separation of adjacent features and delivers more reliable images for standard laboratory assessments and teaching demonstrations. The relationship between aperture and resolving power is a fundamental optical principle: larger NA values enable finer detail to be resolved without changing magnification. Reliable imaging in routine laboratory and educational settings Engineered as part of the MicroBlue range, the lens is intended for frequent use in educational laboratories and general microscopy suites where consistent performance matters. The optical specification S40x/0.65 indicates an emphasis on optical performance at medium magnification, balancing field of view, working distance and image clarity. For users with a basic working knowledge of microscopy, the result is a predictable visual outcome that eases specimen analysis and reduces time spent on re‑adjustment during sessions, supporting efficient workflows and steady throughput. Clear technical advantages that support workflow efficiency The combination of 40x magnification and NA 0.65 provides a concrete efficiency advantage: fewer adjustments are required to obtain high‑contrast images, which reduces time per sample and increases laboratory throughput. The objective’s specification is well suited to applications where mid‑level magnification must reveal subcellular or fine morphological detail without the complexity or cost of higher‑power objectives. Because the functional details are explicit in the technical data, selection decisions can be made on an objective, evidence‑based basis and integrated into existing microscope systems with confidence. Contact Metav Werkzeuge in Emmerich for ordering or technical consultation on the Euromex MicroBlue MB.7040 — reach out via info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: MB.7040 SKU: MB.7040 Manufacturer: Euromex Product type: Microscope objective Model series: MicroBlue Core specifications Magnification: 40x Numerical aperture: 0.65 Features / Special characteristics Optical designation: S40x/0.65 objective Category: For microscopes Label: Mikroskopobjektiv MicroBlue MB.7040 FAQ What does the numerical aperture 0.65 mean for image quality? A higher numerical aperture, such as 0.65 on this microscope objective, increases light collection and improves resolution and contrast, enabling finer structural detail to be resolved at 40x magnification. Is the MicroBlue MB.7040 suitable for educational use? Yes. The MicroBlue MB.7040 objective is designed for routine laboratory and educational environments where consistent, reliable mid‑power imaging is required. Which magnification range is appropriate for this objective? The specification indicates 40x magnification; this objective is best used where medium magnification is needed to observe cellular structures and fine morphological details. Can this objective be used on most standard upright microscopes? The MicroBlue MB.7040 is supplied as a standard microscope objective suitable for use with microscopes that accept standard objective fittings; verify compatibility with the instrument’s nosepiece and tube length specification. How does the S40x/0.65 designation affect selection? The S40x/0.65 label describes the optical design and performance at 40x with NA 0.65, which helps in choosing an objective that balances resolution and light throughput for the intended application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Microscope Objective 0.7mm Working Distance NA 0.65 - Euromex
Achieve consistent high‑contrast imaging with a high numerical aperture (NA 0.65) and a compact working distance (0.7 mm); the result is improved resolution and reliable detail capture for demanding life‑science and microscopy applications. Order the objective directly via Metav Werkzeuge or consult our specialists for integration advice. Delphi‑X Observer DX.7740 — 40x microscope objective, high NA 0.65 (Euromex) The Delphi‑X Observer DX.7740 is a microscope objective optimised for life‑science imaging, offering a high‑aperture plan design suited to detailed sample observation in research and industrial laboratories High NA 0.65 for improved resolution Short working distance 0.7 mm for close focus Compatible with Delphi‑X Observer series Precision optics for reliable high‑resolution imaging The optical design centres on a numerical aperture engineered to maximise light collection and contrast, which directly improves image sharpness and resolving power. A high‑aperture plan objective corrects field curvature, producing a flat image plane across the field of view; this reduces the need for frequent refocusing and supports reproducible documentation of microstructures. By prioritising optical performance, the objective enables shorter exposure times and better signal‑to‑noise ratios, helping laboratories to increase throughput without compromising data quality. Close working distance for controlled surface inspection A working distance of 0.7 mm allows close access to specimen surfaces, making the objective particularly suitable for fine detail inspection and manipulation under the microscope. Close working distance demands careful handling and appropriate sample preparation, but it also permits use of immersion media or fine‑scale measurements where depth resolution is critical. The compact clearance benefits applications that require simultaneous imaging and micro‑instrument interaction, such as microdissection or probe‑based metrology, while the optical design maintains contrast despite the reduced separation from the sample. Smooth integration into life‑science imaging workflows Designed for laboratory environments, this plan objective combines high aperture and a machining‑grade finish to support routine research and industrial microscopy. The design supports consistent imaging across sessions and complements modular microscope systems within the Delphi‑X Observer series. For laboratories requiring confirmation of fitment or further technical data, the Metav Werkzeuge team provides detailed compatibility guidance and can supply the appropriate documentation; technical enquiries may be directed to info@metav-werkzeuge.com or +49 2822 7131930 for prompt assistance. Contact Metav Werkzeuge for supply and technical integration of the Euromex Delphi‑X Observer DX.7740; Metav’s specialists in Emmerich provide procurement and application support to ensure a smooth fit into existing microscopy setups Technical data Article number: DX.7740 SKU: DX.7740 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Label: Mikroskopobjektiv Delphi‑X Observer DX.7740 Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.7 mm Special features PLPHi plan objective design Optimised for life‑science imaging Series compatibility: Delphi‑X Observer Category: for microscopes FAQ What imaging improvements does a high numerical aperture provide? A high numerical aperture increases light collection and resolving power; the DX.7740’s NA 0.65 delivers finer detail and better contrast for high‑resolution microscopy tasks. Is this objective suitable for delicate biological samples? Yes, the plan‑type optical correction and high aperture make the objective appropriate for many life‑science applications, though the 0.7 mm working distance requires careful sample handling. Which microscopes is this objective compatible with? The objective is designed for integration within the Delphi‑X Observer series and other microscopes that accept standard objective mounts and dimensions associated with this product class. Are there special handling considerations for the short working distance? Because the working distance is compact, close sample approach is required; this benefits surface‑sensitive tasks but necessitates careful lens and specimen handling to avoid collision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Objective Lens 0.7mm Working Distance NA 0.65, S40x/0.65 PLi - Euromex
Take advantage of the combination of high resolving power and a compact working distance to capture fine detail in thin specimens; order the objective directly via Metav Werkzeuge or consult our technical team for integration support. Delphi‑X Observer DX.7240 microscope objective — 40x magnification, 0.65 numerical aperture (Euromex) The Delphi‑X Observer DX.7240 is a 40x microscope objective designed for life‑science imaging where high resolution and short working distance are required 40x magnification for detailed cellular imaging Numerical aperture 0.65 for enhanced resolution 0.7 mm working distance for thin‑sample applications Part of the Delphi‑X Observer series by Euromex High resolving power for demanding inspections The 40x magnification combined with a 0.65 numerical aperture delivers optical performance tuned for detailed observation of thin biological specimens and fine structural features. A higher numerical aperture increases the objective’s light‑gathering ability and lateral resolution; in practical terms this means sharper contrast and improved clarity when imaging cellular details or microstructures under transmitted or reflected light. The designation S40x/0.65 PLi (source: Life Science PDF) indicates the optical specification used during design and verification, supporting consistent image quality across routine laboratory workflows. What the short working distance means in practice With a 0.7 mm working distance, the objective is optimised for specimens covered by a standard coverslip or for preparations requiring minimal clearance between sample and front lens. This compact clearance enhances numerical aperture utilisation but requires careful focusing and compatible stage clearance. For many life‑science applications, the shorter working distance contributes to improved resolution at the focal plane; however, users should check mechanical compatibility with condenser and stage accessories before installation to avoid collision and to ensure safe handling of delicate samples. Reliable integration and consistent imaging in the lab Belonging to the Delphi‑X Observer series and supplied under the Euromex label, this objective (SKU DX.7240) is intended to fit established microscopy setups that accept standard mounted objectives. The optical specification supports reproducible results in documented workflows, making it suitable for educational laboratories, research benches and routine quality control tasks where repeatability matters. The compact design and specified optical values help laboratories maintain a predictable imaging chain, reducing time spent on setup and calibration. For application advice or to order the Euromex Delphi‑X Observer DX.7240, contact Metav Werkzeuge for procurement and technical guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: DX.7240 SKU: DX.7240 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.7 mm Special features Designation: S40x/0.65 PLi (Life Science PDF) Series: Delphi‑X Observer Category: For microscopes FAQ What resolution improvements can be expected with this objective? The Delphi‑X Observer DX.7240 microscope objective (Euromex, SKU DX.7240) offers improved lateral resolution through its 0.65 numerical aperture, which enhances detail contrast compared with lower‑NA objectives. Is the working distance suitable for coverslip‑mounted samples? Yes. The 0.7 mm working distance is compatible with thin, coverslip‑mounted preparations, though care is required to ensure adequate mechanical clearance on the microscope stage. Can this objective be used for reflected light as well as transmitted light applications? The optical specification (S40x/0.65 PLi) focuses on imaging performance; the DX.7240 can be used in common life‑science illumination setups, with configuration depending on the microscope’s illumination pathway. Does the objective require special alignment or calibration? Standard microscope alignment procedures apply. The Delphi‑X Observer DX.7240 is designed for reproducible results; alignment and condenser matching will optimise performance. Where can technical compatibility be checked before purchase? For integration checks, Metav Werkzeuge can advise on mechanical and optical compatibility; contact details are provided above for tailored guidance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Blue Filter for Lamp Housing, 45mm Diameter - Euromex
Taking advantage of a precise blue filter with a compact 45 mm diameter yields controlled illumination and improved contrast in microscopy applications; order the blue filter IS.9700 directly via Metav Werkzeuge or consult our advisors for compatibility and stock information. Blue filter 45 mm for lamp housing IS.9700 — Euromex microscope filter, 45 mm diameter for lamp housings Blue filter 45 mm for lamp housing IS.9700 is a purpose-made accessory for microscope illumination systems, designed to be fitted into compatible lamp housings to refine light characteristics and support clearer imaging. Blue filter for microscope illumination 45 mm diameter for standard lamp housings Article number IS.9700 by Euromex Improved contrast through targeted illumination The blue filter shifts the spectral composition of the lamp output towards shorter wavelengths, which can enhance visual contrast for certain specimens and reduce dominant warm tones from halogen or LED light sources. For routine inspection and educational microscopy, this results in sharper perceived edges and more distinct colour separation without altering the optical path. The accessory is intended for integration into the lamp assembly rather than the objective or eyepiece, so the effect is applied at the illumination stage and is compatible with standard transmitted and reflected light set-ups. This approach helps to accentuate details in stained samples and surface features while maintaining a simple, passive modification to the lighting. Compact, compatible design for simple integration With a nominal diameter of 45 mm, the filter is sized to suit common lamp housings used in microscopy accessories; the compact format supports quick installation and minimal adjustment of the existing lighting unit. The product is presented as an accessory component for microscope illumination systems and is identified under IS.9700 for ordering and inventory purposes. Due to its straightforward form factor, the filter can be combined with other illumination accessories such as diffusers or polarising elements, enabling modular adaptation of the light source without extensive reconfiguration. The compact design reduces the footprint within the lamp housing while providing a consistent optical effect. Practical considerations for laboratory and workshop use The filter is supplied as a dedicated microscope accessory and listed under the Euromex range, making it suitable for quality-controlled laboratory environments and educational institutions. As a passive optical component, it requires no electrical connection and imposes no maintenance beyond occasional cleaning with appropriate, non-abrasive materials. For procurement and logistical reliability, the item is available through Metav Werkzeuge, where stock levels and delivery options can be checked; the clear article reference IS.9700 ensures correct ordering and reduces the chance of specification errors. When in doubt about compatibility with a particular lamp housing, technical advisors can verify fitment using the lamp aperture and accessory mounting details. For availability and tailored advice on the Euromex blue filter IS.9700, contact Metav Werkzeuge for stock checks and specification guidance at Metav Werkzeuge GmbH. Technical Data Article number: IS.9700 SKU: IS.9700 Manufacturer: Euromex Product type: Microscope filter Label: Blauer Filter 45mm für Lampengehäuse IS.9700 Facts Diameter: 45 mm Image file name: IS.9700.jpg Image file size: 97,751 bytes Special features Blue optical filter For lamp housing applications Microscope illumination accessory Category: Filter (Microscopy accessories) FAQ What is the primary effect of the blue filter on microscopy illumination? The blue filter IS.9700 narrows and shifts the lamp spectrum towards blue wavelengths, which enhances contrast and colour separation for many specimens when fitted into the lamp housing. Will the filter fit any microscope lamp housing? The filter is designed for a 45 mm diameter aperture; compatibility depends on the lamp housing's internal diameter and mounting method, so verify the lamp aperture before ordering IS.9700. How should the filter be cleaned and maintained? Clean the glass surface gently with a lint-free cloth and mild optical cleaner; avoid abrasive materials to preserve the filter coating and optical quality of IS.9700. Is the Euromex filter suitable for both transmitted and reflected light setups? Yes, the filter is an illumination accessory and can be used with both transmitted and reflected lighting systems, provided the lamp housing accepts a 45 mm accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Green Filter For Lamp Housing, 45mm - Euromex
Take advantage of precise colour filtration and simple integration for consistent illumination in inspection and imaging workflows; the combination of reliable spectral control and standard 45 mm sizing ensures repeatable results — order the green filter via Metav Werkzeuge or consult the technical team for compatibility checks. Green Filter 45 mm for Lamp Housing IS.9702 — Green illumination filter, 45 mm diameter, Euromex The Green Filter 45 mm for Lamp Housing IS.9702 is a compact microscope illumination filter intended to modify light output for improved contrast and colour balance in inspection and imaging applications. Accurate colour correction for illumination Compact 45 mm diameter for standard housings Simple insertion for lamp assemblies Compatible with microscope illumination systems Consistent colour and improved contrast for reliable inspection The green filter IS.9702 shifts lamp emission toward the green spectral band to enhance spectral contrast for colour-sensitive tasks. In practice, this results in clearer differentiation of features under transmitted or reflected light, which supports faster decisions in routine inspection. The standard 45 mm diameter ensures compatibility with a wide range of lamp housings used in laboratory and workshop environments, providing a predictable optical effect without the need for additional accessories. Quick integration into existing illumination setups Designed for direct use in lamp housings, the accessory permits simple insertion and can be used in typical microscope illumination chains. Because the component is a dedicated illumination filter, it reduces the need for software post-processing by delivering a more suitable colour balance at source. The reduced setup complexity increases throughput for repetitive tasks and lowers the risk of variation between sessions, making the filter a practical choice for both educational and industrial microscopy applications. Reliable supply and experienced distribution for professional use Procurement through an established supplier provides continuity for production and lab operations. Metav Werkzeuge acts as a quality filter in the supply chain and combines practical logistics with sector expertise, supporting access to precision accessories across Europe. With an extensive portfolio and a history of servicing many workshops, Metav offers dependable availability and product information to support integration into inspection workflows, helping to maintain consistent results. For procurement guidance and availability of the IS.9702 green filter, contact Metav Werkzeuge for expert advice and compatibility checks for existing lamp housings. Technical data Article number: IS.9702 SKU: IS.9702 Product type: Microscope filter Manufacturer: Euromex Label: Grüner Filter 45mm für Lampengehäuse IS.9702 Facts Diameter: 45 mm Image file size: 92,762 bytes Image filename: IS.9702.jpg UID: IS.9702 Special features Green optical filter for lamp housing Intended for microscope illumination Compatible with 45 mm lamp holders FAQ What is the primary function of this filter? The green filter IS.9702 narrows lamp output toward the green band to increase contrast and improve visual separation of colour-dependent details during microscopy inspections. Which lamp housings is the accessory compatible with? The component is intended for lamp housings that accept a 45 mm insert; compatibility with specific assemblies depends on the housing inner diameter and mounting method. Can this filter be used with microscopes for transmitted and reflected light? Yes, the filter is suitable for both transmitted and reflected illumination where a green-dominant spectrum improves feature visibility in microscopy and visual inspection tasks. How should the filter be handled and cleaned? Handle the optical surface with care; clean using a soft, lint-free cloth and suitable optical cleaner. Avoid abrasive materials and excessive pressure on the glass surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Polarisation Filter for Lamphouse, IS.9600 - Euromex
Reliable polarised illumination and a compact 45 mm diameter support improved contrast for birefringent samples in lamphouse setups. Thanks to simple integration with standard lamphouses and consistent optical performance, the filter assists routine microscopy and teaching applications. Order the Polarisation filter iScope IS.9600 directly via Metav Werkzeuge or ask our consultants for tailored advice. Euromex iScope IS.9600 — Polarisation filter, 45 mm for lamphouse A Polarisation filter iScope IS.9600 engineered to enhance contrast in transmitted-light lamphouse illumination for the observation of birefringent and anisotropic specimens. 45 mm diameter for lamphouse Improves contrast for birefringent samples Compatible with iScope lamphouse series Clearer contrast for polarised microscopy A dedicated polarisation filter enhances visibility of structures that alter polarised light, making features in birefringent materials stand out against the background. By introducing controlled polarisation into the illumination path, the accessory increases image contrast without changing the objective optics. The compact 45 mm size is specified for lamphouse integration, so laboratories and teaching facilities benefit from a device that focuses on improving sample contrast while keeping the microscope's optical train unchanged. Easy fitting and reliable compatibility Designed for straightforward placement in the lamphouse, the accessory avoids complex alignment procedures and supports reproducible results during routine use. The item belongs to the iScope series and matches typical lamphouse mounts, enabling quick replacement or addition to existing setups. Installation requires no specialised tooling; once in place, the polariser maintains consistent orientation relative to the condenser and analyser, which is essential for repeatable polarised-light examinations and comparative documentation. Practical handling and application guidance For everyday laboratory work the filter provides dependable optical behaviour with minimal maintenance: gentle cleaning of the glass surfaces and careful handling protect the optical element and preserve its performance. As an optical accessory it is particularly useful in mineralogy, materials science and education where polarised illumination reveals internal stresses, crystallinity and anisotropy. When planning an experiment, consider the lamphouse aperture and condenser configuration to ensure the filter delivers the intended contrast enhancement. For precise polarised imaging with Euromex optics, contact Metav Werkzeuge for supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and compatibility guidance from Emmerich. Technical data Article number: IS.9600 Manufacturer: Euromex Series: iScope Type: Polarisation filter SKU: IS.9600 Application: for lamphouse Diameter: 45 mm Facts Diameter: 45 mm Special features Polarisation accessory for transmitted-light lamphouse Enhances contrast of birefringent and anisotropic samples Category: Polarisation (microscopy accessory) FAQ What is the primary purpose of a polarisation filter? A polarisation filter modifies the illumination to reveal birefringence and anisotropic features; the Euromex Polarisation filter iScope IS.9600 is supplied for lamphouse use to improve contrast in such samples. Will the filter fit existing lamphouses? The accessory is specified as a 45 mm unit for lamphouse integration and is compatible with typical iScope lamphouse fittings, as indicated by the IS.9600 designation. How should the filter be cleaned and cared for? Clean glass surfaces with a lint-free cloth and suitable optical cleaner; the Euromex IS.9600 should be handled by the edges to avoid fingerprints and preserve optical quality. Which applications benefit most from this polariser? Mineralogy, materials analysis and teaching labs gain most from polarised illumination because the IS.9600 highlights internal stresses, crystalline orientations and other anisotropic properties. Is technical advice available for integration into a specific microscope? Technical guidance is available; Metav Werkzeuge can advise on compatibility and installation for the Euromex IS.9600 to ensure correct lamphouse and condenser alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm White Filter For Lamp Housing, Microscope Filter - Euromex
Take advantage of the 45 mm white diffusion element and its compatibility with standard lamp housings to achieve more consistent illumination and fewer retakes in routine microscopy. Order the filter directly via Metav Werkzeuge or consult the Metav team for compatibility details and rapid delivery. Euromex IS.9706 — White 45 mm microscope filter for lamp housings The Euromex IS.9706 is a white diffusion filter designed to produce even illumination in microscope lamp housings and similar lighting assemblies. 45 mm diameter for standard lamp housings Uniform white light diffusion Designed for straightforward installation Consistent illumination for reliable image capture A white diffusion element evens out light output from the lamp housing, reducing hotspots and reflections that can impair image quality. The 45 mm diameter matches common lamp-seat dimensions, so the result is uniform illumination across the field of view. Less variance in light distribution translates into fewer repeated captures and a steadier baseline for image analysis, which supports efficient laboratory routines and dependable documentation. Fits typical microscope lamp housings for quick integration The component is intended specifically for installation into microscope lamp assemblies and analogous housings; its nominal 45 mm size makes it suitable for many standard fittings. As a passive optical accessory, it integrates without electrical modification, offering a straightforward option for retrofitting existing lighting setups. Compatibility with conventional lamp seats simplifies stocking decisions and reduces the need for multiple, specialised spare parts. Improves visual comfort and analytical consistency By producing softer, more evenly distributed light, the white filter reduces glare and eases visual fatigue during prolonged inspections. The diffusion effect enhances contrast uniformity without altering colour balance, which is beneficial for both human observation and digital imaging workflows. This small optical addition can therefore contribute to higher throughput by lowering the incidence of rework due to uneven lighting. Simple handling with practical benefits for workshops and labs The design focuses on practicality: a compact microscope filter that is easy to store and deploy as part of routine maintenance of illumination systems. The unobtrusive white diffuser supports consistent results over repeated sessions and fits into organised spare-part inventories. For teams aiming to standardise lighting across multiple instruments, the filter offers a low-effort measure to harmonise performance between stations. For reliable, uniform illumination in microscopy applications, request the Euromex IS.9706 white filter from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and fast dispatch. Technical Data Article number: IS.9706 SKU: IS.9706 Manufacturer: Euromex Product type: Microscope filter Data Diameter: 45 mm Image file size: 52329 bytes Special features White diffusion filter For lamp housings Product label: Weißer Filter 45mm für Lampengehäuse IS.9706 Intended application: microscope lamp illumination FAQ What diameter does the filter have? The Euromex IS.9706 is specified with a 45 mm diameter for use in matching lamp housings. What is the intended application of this component? This component is a white diffusion microscope filter intended for use in microscope lamp housings and similar illumination assemblies. Which article number and SKU identify this product? The item is listed as IS.9706 and uses the same value for the SKU. Who manufactures the filter? The filter is produced by Euromex and sold under the designation IS.9706 as a microscope illumination accessory. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Yellow Filter for Lamp Housing, Microscopy Accessory - Euromex
Take advantage of a compact optical solution that combines a yellow filter with a standard 45 mm diameter for consistent lamp-housing compatibility; the result is improved contrast in transmitted-light applications and straightforward integration into existing microscope illumination. Order supply or request compatibility advice via Metav Werkzeuge if required. Euromex IS.9704 yellow 45 mm microscope lamp filter — yellow filter, 45 mm diameter Euromex IS.9704 is a yellow microscope lamp filter designed to fit lamp housings and to modify illumination for clearer, higher-contrast transmitted-light observation. Yellow 45 mm diameter for lamp housings Fits standard microscope lamp holders Manufactured by Euromex optical accessories Enhanced contrast for transmitted-light inspection A dedicated yellow filter provides a simple, effective way to adjust the light spectrum reaching the specimen, improving visual differentiation of features under transmitted light. By selectively attenuating portions of the illumination, the filter increases apparent contrast for many common samples, which can reduce the need for repeated staining or complex image processing. This optical solution delivers a tangible benefit in routine inspection tasks: faster visual assessment with fewer adjustments to the microscope's illumination system. Simple compatibility and quick installation With a nominal diameter of 45 mm, the filter is sized for insertion into compatible lamp housings and holders found on many standard microscope illumination modules. The compact form factor enables a straightforward retrofit without modification of the light source, offering a practical route to upgrade existing setups. Installation and removal require no specialised tools, which helps to keep downtime low and supports continuous operation in busy labs or workshop environments. Reliable accessory for everyday microscopy workflows The filter is intended as a maintenance-friendly accessory for microscopy work where reproducible lighting conditions are important. As a passive optical component it demands minimal care: periodic cleaning of the optical surface preserves image quality and prevents stray reflections. The design supports consistent results across repeated inspections, helping to standardise visual evaluation and to enhance process reliability in quality control or educational settings. Expert supply and advice from a precision partner Metav positions itself as a partner for accessible precision: a central supplier with extensive inventory and practical expertise for laboratory and workshop customers. Benefit from a supplier that combines broad product availability with technical knowledge, supported from a logistics hub in Emmerich. For questions about fitment, compatibility with a particular illumination module, or batch supply for installation across multiple instruments, Metav Werkzeuge can provide targeted advice and procurement support. For compatibility checks or to discuss supply of the Euromex IS.9704 yellow 45 mm microscope lamp filter for specific equipment, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a tailored recommendation and delivery. Technical data Article number: IS.9704 SKU: IS.9704 Manufacturer: Euromex Product type: Microscope filter Label: Gelber Filter 45mm für Lampengehäuse IS.9704 Core specifications Diameter: 45 mm Image file size (product image): 67991 bytes Special features Yellow optical filter For lamp housings (45 mm) Category: Microscope filter Product image available: IS.9704.jpg FAQ What effect does a yellow filter have on transmitted-light microscopy? A yellow filter modifies the illumination spectrum to increase contrast in transmitted-light observations; the Euromex IS.9704 yellow filter is suitable where warmer, higher-contrast lighting improves visual differentiation of sample features. Will the IS.9704 fit my microscope lamp housing? The IS.9704 is specified with a 45 mm diameter for lamp housings; compatibility depends on the lamp-holder design, so verify the holder diameter on the instrument or consult Metav Werkzeuge for confirmation. How should the yellow filter be cleaned and maintained? Clean the optical surface with a lint-free cloth and appropriate optical cleaner; avoid abrasive materials. Regular cleaning keeps the filter performing reliably in routine microscopy workflows. Can the filter be used with LED and halogen illumination? The yellow filter is a passive optical accessory that can be used with common light sources such as LED or halogen lamps, provided the physical holder matches the 45 mm diameter requirement. Is the filter intended for professional laboratory use? Yes. The filter is designed as a practical accessory for microscopy applications where consistent illumination control and improved contrast are desirable; the Euromex IS.9704 supports standard inspection and educational uses. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45mm Yellow Lamp Housing Filter, Microscope Filter - Euromex
Take advantage of a compact 45 mm format combined with reliable yellow spectral filtration to enhance contrast in transmitted-light microscopy; order or request advice easily through Metav Werkzeuge for rapid procurement and technical support. Euromex Yellow Filter for Lamp Housing DX.9704 — 45 mm microscope filter Euromex DX.9704 is a yellow microscope filter designed for insertion into lamp housings to improve contrast and colour balance in brightfield illumination. Yellow spectral filtering for contrast enhancement 45 mm diameter for lamp housings Designed for microscope illumination systems Simple installation and routine upkeep Improve contrast with targeted spectral control A yellow filter alters the lamp spectrum by attenuating shorter wavelengths, which can reduce excessive blue light and help enhance contrast in many transparent or lightly stained specimens. This spectral adjustment supports clearer visual separation of structures without changing objective settings, enabling more consistent observation. The result is a more reliable image rendition under transmitted-light conditions, beneficial in routine inspection and quality-control workflows. Compact 45 mm format for straightforward integration The 45 mm diameter is a decisive specification for compatibility with lamp housings that accept a 45 mm aperture. The compact format simplifies replacement and keeps the illumination path stable, reducing the need for repeated adjustments. Because the component is intended specifically as a lamp housing accessory, fitting it does not require modifications to the illumination assembly; this preserves alignment and repeatability during inspection tasks. Practical benefits for everyday microscopy tasks As a microscope filter, the DX.9704 by Euromex supports improved visual clarity in applications where colour balance and contrast matter, such as routine sample checks and preparatory inspection stages. The filter’s effect is immediate and reversible: it is a non-invasive optical accessory that complements existing lighting rather than altering imaging hardware. This makes it a pragmatic choice for laboratories and workshops seeking straightforward enhancements to image quality. Simple maintenance keeps optical quality consistent Maintenance is kept deliberately simple to preserve optical performance. Regular checks for dust and fingerprints, coupled with gentle cleaning using lens tissue and an appropriate optical cleaner, will maintain transmission characteristics and prevent artefacts. The filter’s role in the illumination path means that modest care extends service life and preserves consistent spectral balance across inspections. For procurement and technical guidance on the Euromex DX.9704 yellow filter, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9704 Brand: Euromex Product type: microscope filter Data Diameter: 45 mm Special features Yellow filter for lamp housing FAQ What is the exact diameter of the filter? The Euromex DX.9704 filter has a diameter of 45 mm and is intended for lamp housings that accept this size. What does a yellow filter achieve in microscopy? A yellow filter reduces shorter wavelengths and helps to enhance contrast and colour balance in transmitted-light observation, improving visual separation of fine features. Will this filter fit my microscope lamp housing? The DX.9704 is designed for lamp housings with a 45 mm aperture; compatibility depends on the lamp housing dimensions rather than the microscope brand. How should the filter be fitted into the lamp housing? The filter is installed directly into the lamp housing aperture; it is designed as an accessory for insertion without modification to the illumination assembly. How can the filter be cleaned and stored? Clean with lens tissue and a suitable optical cleaner; store in a dust-free container when not in use to preserve transmission and prevent surface damage. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45° Mounting For Stereo Microscope With Large Extension And Heavy Crossbar - Metav IndustryLine
Benefit from a combination of robust cast base, large extension range and a massive crossbar for secure and repeatable microscope mounting. Order the mount directly via Metav Werkzeuge or contact the consultants for specification support and integration advice. Mount for Universal Stand SF11 — large extension range & heavy-duty crossbar (Metav IndustryLine) The Mount for Universal Stand SF11 provides a heavy‑duty, long‑reach support solution for stereo microscope applications and industrial optical tasks Robust cast base for low vibration Wide extension range for flexible positioning Massive crossbar for secure mounting Compatible with universal stereo stands Stable foundation for accurate optical work A heavy cast base delivers the primary benefit of reduced vibration and improved repeatability for optical inspection tasks. The solid construction ensures that a microscope or inspection head remains steady during measurement or documentation, which translates directly into better image stability and fewer retakes. Built for workshop and laboratory environments, the support reduces setup variability and helps maintain consistent focus and alignment when performing visual inspection or assembly tasks. Long reach and flexible positioning to increase access Thanks to the large extension range and the massive crossbar, the assembly offers extended reach without sacrificing rigidity. This allows operators to position an optical head over larger workpieces or to reach recessed areas while keeping the instrument correctly aligned. The design permits quick height and lateral adjustments, reducing setup time and enabling ergonomic placement of the microscope for both inspection and operation. The flexible geometry supports diverse workflows in quality control, small-series assembly and research benches. Designed for industrial use and simple integration The mount is tailored to pair with universal stands for stereo microscopes, providing compatibility with common head fittings and clamping systems. The device is classified within industrial optics equipment and is supplied by Metav IndustryLine, which acts as a quality filter for the European market. The rugged build and clear functional focus make the mount suitable for production environments where reproducible positioning and robust handling are required. Technical documentation and product identifiers accompany the unit to support procurement and inventory processes. Contact Metav Werkzeuge for details on integrating the SF11 mount into existing inspection stands; Metav Werkzeuge can provide technical advice and delivery options from Emmerich. Technical data Article number: M503.237.1 GTIN: 4054469145112 Type: SF11 ECLASS: 32130102 Customs tariff number: 90119090 Manufacturer: Metav IndustryLine Facts Material: cast base Feature: large extension range Feature: massive crossbar Category: Optik Special features Compatible with universal stands for stereo microscopes Robust construction for low vibration Industrial workshop and laboratory suitability Heavy‑duty crossbar for secure mounting FAQ What materials form the base of this mount? The mount is built on a cast base, providing mass and damping for stable optical setups and reliable positioning. Is the mount compatible with standard microscope stands? Compatibility is designed for universal stands used with stereo microscopes; the SF11 mount fits common clamp and head configurations. Which features improve positioning accuracy? The massive crossbar and the large extension range increase reach while maintaining stiffness, reducing deflection during inspection tasks. What identifiers should be used when ordering or specifying this mount? Use the article number M503.237.1 and GTIN 4054469145112 to ensure the correct SF11 mount from Metav IndustryLine is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com