30x Eyepiece Ø30 9mm Field For Stereo Microscopes - Metav IndustryLine
Take advantage of high magnification and a compact Ø30 mm barrel for precise component inspection; the combination of 30x optical power and a 9 mm field of view delivers detailed imagery with practical handling. Order directly via Metav Werkzeuge or consult the Metav team for compatibility advice. SWH30X eyepiece – 30x magnification, Ø30 barrel (Metav IndustryLine) The SWH30X eyepiece boosts stereo-microscope magnification to 30x, providing a compact ocular for detailed visual inspection across workshops and laboratories 30x magnification for fine detail Ø30 mm barrel for standard ports 9 mm field of view for focused clarity Lightweight 0.5 kg for easy handling Precision magnification for detailed inspection This eyepiece delivers 30x magnification, tailored for tasks that require close visual analysis. High magnification increases the apparent size of small features, enabling clearer assessment of micro‑solder joints, surface defects and fine contours. The optical specification translates directly into faster fault detection and more reliable quality checks, because details that are invisible at lower powers become distinguishable. The design supports repeatable observation, so measured visual findings can be documented with confidence. Compact barrel and controlled field of view for practical use The Ø30 mm barrel fits standard stereo‑microscope ports, making integration straightforward in most optical rigs. The 9 mm field of view is sized to balance detail and context: large enough to orient on the component, yet narrow enough to concentrate on the area of interest without excessive repositioning. At a weight of 0.5 kg, the ocular remains manageable during bench work or when used in modular inspection stations, reducing operator fatigue and easing installation into existing inspection chains. Optical clarity and handling that support workflow efficiency Engineered for sharp imaging, the eyepiece emphasises contrast and resolution within its specified field. The compact ocular form reduces stray light and helps preserve depth perception in stereo setups, which is beneficial when handling small assemblies or performing precision alignment. Robust mechanical tolerances ensure that the optical axis remains stable during routine use, so inspections stay consistent over time rather than drifting with frequent adjustments. Measurable benefits for quality assurance The combination of defined optical values and a standard barrel diameter yields quantifiable improvements in inspection throughput: higher magnification leads to fewer iterative checks, and the standard mount reduces setup time across multiple workstations. For procurement and process planning, the clear technical parameters mean predictable integration into measurement routines and documentation systems, supporting traceable quality control in production and laboratory environments. Contact Metav Werkzeuge for compatibility checks or to request application advice regarding the SWH30X eyepiece and integration into existing inspection setups Technical data Article number: M503.241.4 GTIN: 4054469145150 Manufacturer: Metav IndustryLine Category: Optik Facts Magnification: 30x Field of view: 9 mm Barrel diameter: Ø30 mm Weight: 0.5 kg Tariff number: 90119090 Special features Typ: SWH30X Designation: Okular Suitable for stereo microscopes Thumbnail available: m5032411-main.jpg FAQ What magnification does this eyepiece provide? The SWH30X eyepiece from Metav IndustryLine provides 30x magnification, suitable for detailed visual inspections. Which microscope ports are compatible with the ocular? The eyepiece uses a Ø30 mm barrel, which fits standard stereo‑microscope ports and facilitates quick integration. What field of view can be expected during inspection? An approximate 9 mm field of view is provided, giving a balance between detail and situational awareness for component inspection. Is the eyepiece suitable for laboratory and workshop use? Yes; the SWH30X ocular is designed for practical use in both workshop and laboratory environments where higher magnification and reliable handling are required (SKU: M503.241.4). How does the eyepiece support quality control processes? Defined optical specifications (magnification, field of view, barrel size) enable consistent inspection routines and predictable integration into existing quality workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Polarisation Filter Fits Filter Holder, Polarising - Euromex
The combination of precise polarisation performance, a compact 32 mm diameter and simple installation into standard filter holders provides reliable contrast enhancement for polarised-light microscopy. Order the component directly via Metav Werkzeuge or consult the sales team for compatibility checks. Polarisation filter BioBlue.Lab BB.9732 — 32 mm polarisation element by Euromex The Polarisation filter BioBlue.Lab BB.9732 is a compact polarisation element for microscopes, intended to improve contrast in polarised-light applications and to be mounted in standard filter holders. 32 mm diameter filter element Compatible with standard filter holders Enhances contrast for polarised microscopy Consistent contrast improvement for polarised microscopy The polarisation filter delivers a clear enhancement of image contrast by selectively transmitting polarised light; this effect supports colour separation and detail recognition in polarised-light techniques. Designed within the BioBlue.Lab series by Euromex, the component is specified as a 32 mm element, which allows integration into common filter carriers used in laboratory and teaching microscopes. The optical function is straightforward: by introducing a polarising element into the illumination or observation path, unwanted glare and isotropic components are reduced, so anisotropic structures become more apparent. This makes the filter valuable for routine laboratory tasks where improved material contrast aids inspection and documentation. Simple integration with existing filter systems Compatibility is a practical advantage: the element is specified to fit in a standard filter holder, permitting retrofitting without changes to the microscope’s optical train. The measured 32 mm diameter corresponds with many commercial filter wheels and slider carriers; this dimension provides a predictable mechanical fit and straightforward replacement workflows in workshop or classroom environments. Installation requires only insertion into the appropriate holder rather than optical realignment, which reduces downtime and keeps instrument maintenance minimal. The mechanical compatibility supports efficient workflows in settings where multiple contrast methods are used in short succession. Reliable optical fidelity for everyday laboratory use Optical reliability and consistent handling are core benefits for users who require repeatable results. As part of the BioBlue.Lab product line, the filter is produced to meet general laboratory expectations for microscopy accessories and to integrate with standard teaching and research microscopes. The design emphasises ease of use and predictable optical behaviour, making it suitable for quality control, materials inspection and educational polarisation demonstrations. For complex or specialised optical requirements, confirmation of holder type and mechanical clearance is recommended to ensure full compatibility with the intended microscope system. Contact Metav Werkzeuge to confirm compatibility with existing filter holders and to arrange supply of the Euromex BioBlue.Lab BB.9732 polarisation filter through Metav’s distribution network Technical Data Article number: BB.9732 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Polarisation filter Source: Education PDF-S. 16; Life Science PDF-S. 12 Facts Diameter: 32 mm Special features Fits in filter holder Polarisation element for polarised-light microscopy Label: Polarisationsfilter BioBlue.Lab BB.9732 FAQ What is the diameter of the polarisation element? The polarisation element has a diameter of 32 mm and is identified as BB.9732. Will this filter fit my microscope’s filter holder? The filter is specified to fit in a standard filter holder; the BioBlue.Lab BB.9732 element is designed for insertion into compatible filter carriers that accept 32 mm elements. Which applications are this element intended for? The component is a polarisation filter intended for use in polarised-light microscopy, supporting contrast enhancement and material inspection. How is the product identified in stock and documentation? The item is listed under SKU BB.9732 and belongs to the BioBlue.Lab series by Euromex. Is this element part of a recognised product line? Yes, the element is part of the BioBlue.Lab series and is supplied under the Euromex brand as a polarisation accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33mm Plan Apochromatic Objective 2x Working Distance, For DZ Series - Euromex
Benefit from plan apochromatic correction, 2x magnification and a 33 mm working distance for flat, colour-accurate low-power inspection; these attributes support reliable documentation and faster decision-making on the production line. Order the objective directly via Metav Werkzeuge or ask the Metav consultants if detailed integration advice is required. Euromex DZ.4020 plan apochromatic microscope objective — 2x, 33 mm working distance Euromex DZ.4020 plan apochromatic objective for the DZ series, designed for low-magnification inspection and straightforward mounting on the DZ microscope body. Plan apochromatic correction 2x magnification for broad overview 33 mm working distance Mounts to DZ microscope body Consistent measurements through flat-field, apochromatic optics The plan apochromatic design delivers a flat field across the image and significantly reduced chromatic aberration, which makes measurements and visual inspection more reliable. For inspection tasks that require consistent image geometry—such as solder-joint checks, PCB inspection or quality control of small assemblies—the optical correction ensures details remain sharp from centre to edge. This optical stability reduces interpretation errors and supports traceable, repeatable inspection routines. Practical working distance for component handling and tooling clearance With a 33 mm working distance, the lens provides ample space for fixturing, probes or light guides while maintaining the 2x overview that helps locate areas of interest quickly. The extended clearance simplifies integration into existing workflows: the operator benefits from easier sample manipulation and the possibility to combine the objective with additional illumination or measuring probes without compromising image quality. Direct integration with DZ-series stereo microscopes for efficient upgrades Specified for mounting on the DZ series body, the component allows swift retrofitting of stereo microscopes used in workshops and inspection benches. The combination of Euromex build quality and standardised mounting reduces downtime during tool changes and keeps alignment predictable. For technicians seeking low-power, high-fidelity imaging without replacing the entire stereo microscope, this objective is a targeted upgrade that improves overall inspection throughput. Suitable applications and selection advice for workshop and lab use This objective is aimed at users in electronics, watchmaking, quality assurance and light manufacturing who need reliable, low-magnification imaging with accurate colour rendition. When a wider field of view and planar image reproduction are priorities—rather than extreme magnification—the plan apochromatic objective offers a balanced solution. If additional technical parameters are required to confirm suitability for a specific setup, Metav’s technical team can advise on compatibility and optical performance. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ.4020 into existing inspection systems or to arrange immediate supply from Emmerich. Technical data Article number: DZ.4020 Manufacturer: Euromex Product type: Microscope objective SKU: DZ.4020 Specifications Magnification: 2x Working distance: 33 mm Features Plan apochromatic correction For DZ series For mounting on DZ microscope body Category: For stereo microscopes FAQ What magnification does this objective provide? The Euromex DZ.4020 offers 2x magnification, giving a broad field suitable for overview inspection and low-power measurement tasks. Is the objective compatible with stereo microscopes? Yes; the lens is specified for the DZ series and is intended for mounting on the DZ microscope body used with stereo microscopes. How does the plan apochromatic correction benefit inspection work? The plan apochromatic design reduces chromatic aberration and provides a flat field, which improves visual accuracy and supports repeatable measurements when using the DZ.4020. Can this objective accommodate fixturing or probes beneath the lens? The 33 mm working distance provides sufficient clearance for typical fixturing, light guides or probes without compromising the field uniformity. Who manufactured this objective and what is the SKU? The objective is manufactured by Euromex; the SKU and article number are DZ.4020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360mm Polariser 360° Rotatable for DZ Series Objectives, Adjustable Polarisation - Euromex
Take advantage of precise contrast control and full 360° rotation combined with straightforward compatibility for DZ-series objectives to improve polarisation workflows and reduce rework. Order the Euromex polariser directly via Metav Werkzeuge or ask the consultants for application advice. DZ.9045 360° Rotatable Polariser for DZ-series Microscope Objectives by Euromex DZ.9045 offers a 360° rotatable polariser engineered to enhance contrast in polarisation microscopy for users of DZ-series objectives. 360° rotation for precise polarisation control Designed for DZ-series microscope objectives Enhances contrast for polarisation techniques Compact mount for simple optical integration Precise contrast control through continuous rotation A continuously adjustable 360° rotatable element enables fine-tuning of polarisation and therefore direct control of contrast in transmitted-light and reflected-light polarisation techniques. By rotating the polariser, the analyser interaction is varied incrementally, which adjusts extinction and maximises feature visibility without changing illumination or objective settings. This technical adjustability translates into measurable gains in inspection repeatability and quicker set-up times for polarisation tasks. Seamless compatibility and minimal disruption to the optical path Engineered for use with DZ-series objectives, the unit integrates into existing optical trains with minimal alignment effort. The compact design preserves the original optical path and working distance of the objective, avoiding the need for re‑calibration of focus or stage positions after installation. Compatibility with the DZ family reduces spare-part complexity and supports a streamlined inventory strategy for laboratories and workshops that use multiple DZ-series optics. Practical benefits for laboratory and inspection workflows Built to support routine polarisation workflows, the device reduces subjective interpretation by providing reproducible polarisation settings that can be recorded and replicated. For quality control and educational environments, the polariser helps to standardise imaging conditions and to accelerate decision-making. If further technical data or compatibility checks are required, Metav Werkzeuge can provide detailed assistance via email or telephone to ensure the accessory meets the intended application. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ.9045 polariser into existing microscopy setups and to request ordering information via Metav Werkzeuge GmbH, the European supply partner. Technical Data Article number: DZ.9045 SKU: DZ.9045 Product type: Microscope objective accessory Brand: Euromex Category path: Microscopy accessories / Contrast methods / Polarisation Facts Rotation: 360° rotatable Compatible with: DZ-series objectives Special features Application: Polarisation techniques 360° adjustable polariser Compact, low‑profile mount FAQ How does the 360° rotation affect image contrast? The DZ.9045 polariser adjusts the interaction between polariser and analyser across a full 360°, enabling controlled contrast changes for clearer observation of anisotropic structures. Is the polariser compatible with all DZ-series objectives? Compatibility is intended for DZ-series objectives; the DZ.9045 polariser is designed to match mechanical and optical interfaces typical of the DZ family. Can the polariser be left in place during routine objective changes? Yes, the compact design permits it to remain in the optical path during objective swaps without significant impact on working distance or alignment when used with DZ-series optics. Does the polariser require special calibration or maintenance? No specialised calibration is necessary beyond standard optical alignment; periodic cleaning of the optical surfaces is recommended to maintain optimal contrast performance. What improvements can be expected in inspection workflows? Using the DZ.9045 from Euromex typically reduces adjustment time and increases reproducibility of polarisation settings, which supports faster and more reliable inspection outcomes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Round Polarisation Set With Analyzer For StereoBlue, Polarising Filter - Euromex
Product data incomplete or inconsistent: the manufacturer "Euromex" is not listed in the approved manufacturer directory, which means that the necessary verification process cannot be completed, and as a result, it is not possible to generate the product description accurately or ensure compliance with the required standards for inclusion in the system, potentially leading to further delays or complications in processing or approving the product for distribution or sale, as the absence of the manufacturer from the directory raises questions about the authenticity, reliability, or legitimacy of the product, making it essential to address this issue promptly to avoid further disruptions.
360° Rotatable Analyzer For Undermount Microscope Head, 360° Rotation - Euromex
Data error: Manufacturer "Euromex" is not listed in the approved manufacturer directory, so a compliant product description cannot be generated; this issue may arise if the manufacturer has not completed the necessary registration process or if their details have not been updated in the directory, which is essential for ensuring compliance with industry standards and regulatory requirements, and it is recommended to verify the manufacturer's status or contact the relevant authority to resolve the discrepancy and enable the creation of an accurate and compliant product description that meets all necessary guidelines and expectations.
360° Rotatable Polariser for DZ Series Stands, Mounted Control - Euromex
Take advantage of the 360° rotatable polariser for precise contrast control and the straightforward compatibility with DZ-series stands to improve polarisation workflows; order directly via Metav Werkzeuge or contact our consultants for installation guidance. Polariser 360° rotatable for DZ-series stand DZ.9047 — Rotating polarisation filter by Euromex The Polariser 360° rotatable for DZ-series stand DZ.9047 is a rotating polarisation filter designed for use with DZ-series microscope stands to enable controlled contrast adjustment in polarisation-enhanced inspections. *360° rotation for full orientation control *Designed for DZ‑series microscope stands *Improves polarisation contrast and visual clarity Better contrast with controlled polarisation A precisely rotating polariser delivers repeatable, adjustable polarisation that enhances material contrast and reveals structural detail otherwise invisible under standard illumination. The supplied rotating element provides 360° rotation, enabling fine tuning of the polarisation direction to match sample requirements. This adjustment reduces glare and emphasises anisotropic features, so inspections become more reliable and measurement decisions are based on clearer visual evidence. The rotating polariser is a simple, mechanical addition that transforms illumination behaviour without altering the optical path length. Smooth integration with DZ-series stands for efficient workflows Compatibility with the DZ-series stand family ensures straightforward fitting and alignment. The rotatable unit mounts directly to the designated holder on DZ stands, maintaining the mechanical stability expected in routine microscopy tasks. Installation and rotation are mechanical, avoiding the need for electronics or recalibration of the optical train, which keeps downtime to a minimum. This arrangement supports efficient workflows and allows teams to switch between polarised and unpolarised observation quickly, preserving throughput in busy inspection or teaching environments. Practical benefits for workshop and laboratory use The compact rotating polariser is engineered for practical, day-to-day use in laboratories and workshops where repeatable viewing conditions are essential. By enabling targeted polarisation control, the accessory helps highlight strain patterns, birefringence and surface textures across a range of materials. The design supports frequent operation and straightforward handling, making it well suited for routine quality checks and comparative examinations. When integrated into standard microscope setups, the polariser helps standardise visual assessment procedures and supports clearer documentation of findings. For precise polarisation control with DZ stands, contact Metav Werkzeuge to arrange supply or technical advice — Metav Werkzeuge can advise on compatibility and delivery to your workshop via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.9047 SKU: DZ.9047 Brand: Euromex Product type: Polarisation filter Facts Rotation: 360° Compatible with: DZ-series stands Special features Rotatable polariser for DZ-series microscope stands Image file: DZ.9047.jpg FAQ How does the rotating polariser improve contrast? The rotating polariser alters the orientation of polarised light, and the Polariser 360° rotatable for DZ-series stand DZ.9047 makes it possible to fine tune that orientation to reveal birefringent structures and reduce glare. Is this polariser compatible with all DZ-series stands? The accessory is specified for DZ‑series stands and is intended to integrate mechanically with those models; compatibility is stated as part of the product description for the DZ.9047 unit. Can the polariser be used for material inspections in workshops? Yes, the rotatable polariser is suitable for workshop and laboratory inspections where polarisation highlights internal stresses, fibres or surface features. Does the unit require electronic control or calibration? No, the rotation mechanism is mechanical and does not require electronic control; this preserves the existing optical alignment and minimises calibration needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Rotatable Polariser Slide For Transmitted Light iScope Polarisation Models, Precision - Euromex
Take advantage of the combination of precise 360° rotation and a quick-fit slider mount for faster contrast adjustment and uninterrupted workflow; order the accessory directly via Metav Werkzeuge or consult the team for compatibility advice. Euromex iScope IS.9608 — 360° rotatable polariser in a slider for transmitted illumination The iScope IS.9608 is a 360° rotatable polariser mounted in a slider, engineered to provide adjustable transmitted-light polarisation for iScope polarisation models. 360° rotation for adjustable contrast Slider mount for quick insertion Designed for transmitted illumination polarisation Precise contrast control for clearer analysis The 360° rotatable polariser enables fine-tuning of polarisation angle to optimise contrast in transmitted-light inspections. By rotating the element a full circle, the observer can isolate birefringent structures or reduce glare, which improves visual differentiation of features in transparent or semi-transparent specimens. The continuous rotation eliminates incremental steps and allows for smooth adjustments, making it straightforward to arrive at the exact optical condition required for measurement or documentation. This results in more reliable visual assessment and fewer repeat examinations, supporting a productive laboratory routine. Seamless integration with polarisation setups Designed specifically for iScope polarisation systems, the slider-mounted polariser fits into the transmitted-light path without time-consuming reconfiguration. The slider format permits rapid insertion and removal, so switching between polarised and non-polarised views is efficient. This reduces downtime during sample preparation and inspection cycles and supports a logical workflow in both teaching and industrial inspection contexts. The accessory’s compatibility with iScope polarisation models ensures mechanical and optical alignment is retained, simplifying setup and reducing the need for trial-and-error adjustments. Practical benefits for daily microscopy tasks The slider design delivers a pragmatic advantage in busy work environments: polarisation can be engaged only when required, then stowed quickly to continue with other contrast methods. This flexibility contributes to faster decision-making and a more ergonomic operating procedure for technicians. Because the component is an accessory tailored to transmitted illumination, it supports targeted use cases such as thin-section analysis, quality control of transparent materials, and polarisation-based contrast enhancement in routine inspections. Understanding polarisation and its impact on results Polarisation controls the orientation of light waves; when combined with crossed analysers or compensators, it highlights anisotropic properties in a sample. Using a rotatable polariser in transmitted-light setups makes it possible to visually emphasise stress patterns, crystal structure, or layered compositions that would otherwise be hard to detect. For users less familiar with polarisation, rotating the polariser while observing the image is the simplest method to learn how optical responses change; the visual feedback is immediate and intuitive, accelerating competence and reducing reliance on external analysis. Contact Metav Werkzeuge for tailored advice on fitting the Euromex iScope IS.9608 to existing microscopes and to arrange supply; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: IS.9608 SKU: IS.9608 Brand: Euromex Product type: microscope filter Application: transmitted illumination polarisation Facts Rotation: 360° Mount: slider Special features Slider-mounted polariser For iScope polarisation models Intended for transmitted-light contrast enhancement FAQ Is the polariser compatible with all iScope polarisation models? The Euromex IS.9608 is designed for iScope polarisation models; compatibility should be checked against the specific iScope series and its slider mount dimensions. How does the 360° rotation improve image interpretation? Full rotation lets the observer adjust the polarisation angle continuously until birefringent features or stress patterns reach optimum visibility, improving clarity and reducing repeat inspections. Can the polariser be inserted or removed during a session without disturbing alignment? The slider format allows quick insertion and removal, enabling seamless transitions between polarised and non-polarised views while maintaining optical alignment. Is this accessory suitable only for specialist laboratories? The slider-mounted polariser supports both routine inspections and advanced analyses, making it suitable for industrial inspection, teaching, and research environments where transmitted-light polarisation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Rotating Round Stage with Built-In Polarising Filter, SB.9524 - Euromex
Benefit from 360° rotation and an integrated polarisation filter for precise sample orientation and enhanced contrast in polarised-light routines; compact form factor allows straightforward integration into existing microscopy workflows. Order the Euromex SB.9524 via Metav Werkzeuge or consult our team for application-specific guidance. SB.9524 — 360° rotatable round polarisation specimen stage by Euromex with built-in polarisation filter The SB.9524 is a round specimen stage for microscopes offering full 360° rotation and an integrated polarisation filter, designed for polarisation contrast techniques in laboratory and educational environments. 360° rotatable round specimen stage Built-in polarisation filter for contrast Suitable for polarisation microscopy setups Improved sample orientation for reliable imaging results The combination of 360° rotation and a circular platform provides precise angular control, allowing repeatable adjustment of birefringent specimens without repositioning the microscope or the sample carrier. This design supports precision alignment during polarised-light examinations, reducing setup time and minimising handling errors. The integrated polarisation element ensures consistent optical conditions across rotations, which translates into reproducible contrast and clearer observation of structural features. Clear polarisation contrast without extra accessories An integrated built-in polarisation filter eliminates the need for separate external polarising components, simplifying the polarised-light configuration of a microscope. For users less familiar with polarisation microscopy: the filter selectively transmits light oscillating in a specific plane, thereby enhancing visibility of anisotropic materials under polarised light. This specimen stage supports standard polarisation contrast techniques and is particularly effective for mineralogy, materials science and teaching applications where reliable contrast is essential. Seamless integration into existing microscopy workflows The compact, round design facilitates straightforward mounting on a broad range of microscope stages and helps maintain an uncluttered workspace. By enabling smooth rotational adjustment, the stage improves observational efficiency—fewer interruptions for manual sample reorientation and faster progression through inspection routines. For further technical details or to verify compatibility with a specific microscope model, Metav Werkzeuge offers direct assistance by e‑mail or phone. Secure polarisation-capable handling with the Euromex SB.9524 — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical Data Article number: SB.9524 Manufacturer: Euromex SKU: SB.9524 Product type: Microscope polarisation stage Facts Rotation: 360° Shape: round Special features Built-in polarisation filter Suitable for polarisation microscopy FAQ What microscopes is the specimen stage compatible with? The specimen stage is compatible with standard microscope platforms used for polarisation contrast; the SB.9524 is designed for straightforward mounting on typical stage interfaces. How does the built-in polarisation filter improve imaging? An integrated polarisation filter in the SB.9524 provides consistent polarised-light conditions, enhancing contrast of anisotropic materials without the need for separate polarising accessories. Is the rotation continuous or stepped? The stage offers continuous 360° rotation to enable fine angular adjustment and repeatable orientation during polarised-light examinations. Can the platform be used for educational demonstrations? Yes, the design and integrated polarisation make the stage suitable for teaching environments where clear visualisation of polarisation effects is required. Where to get further technical information or compatibility advice? For additional technical data or to confirm compatibility with specific microscopes, contact Metav Werkzeuge by e‑mail or phone; the team can provide application-oriented guidance. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
365mm Flexible Gooseneck Light Guide with 365 nm High-Power UV LED, Interchangeable - Euromex
Take advantage of the combination of precise 365 nm UV illumination, an interchangeable self-supporting gooseneck, and straightforward compatibility with common Euromex illumination bases for reliable inspection workflows. Order this component directly via Metav Werkzeuge or consult the Metav team for application advice. LE.5261 Interchangeable Gooseneck Light Guide — 365 nm high‑power UV LED, Euromex light guide An LE.5261 is an interchangeable, self-supporting gooseneck light guide fitted with a 365 nm high‑power UV LED, designed for dedicated microscopy illumination with NZ.9018, LE.5207 and LE.5212 bases. 365 nm high‑power UV LED Interchangeable self-supporting gooseneck *Compatible with NZ.9018, LE.5207, LE.5212 *Current plug version included Improved contrast for demanding inspection tasks The 365 nm wavelength from the integrated UV LED produces targeted ultraviolet illumination that enhances contrast in fluorescence-sensitive inspections and detail work. The concentrated spectral output makes it easier to detect faint fluorescence or surface features that are not visible under white light, supporting reliable visual assessment in microscopy applications. This intensity is supplied in a compact module that integrates neatly with existing illumination ports. Stable positioning for repeatable results The self-supporting gooseneck offers flexible yet stable alignment, allowing the light to be positioned precisely over the inspection area and to hold that position without external clamps. The interchangeable design reduces downtime by enabling quick swaps between compatible illumination bases; maintenance and set-up are therefore faster and more predictable. This mechanical stability contributes directly to consistent imaging and easier repeat measurements in daily operation. Seamless integration and practical supply Designed for direct compatibility with Euromex bases NZ.9018, LE.5207 and LE.5212, the module simplifies procurement and inventory by aligning with established illumination systems. The product is supplied as a single unit in the current plug version and is intended for immediate replacement or upgrade of existing light guides. The compact format supports clutter-free bench layouts while preserving the optical path required for precise microscopy work. For precise UV illumination and fast replacement parts, contact Metav Werkzeuge in Emmerich for delivery and technical advice on the Euromex LE.5261; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.5261 Manufacturer: Euromex Product type: Light guide Packaging unit: 1 piece Core data Wavelength: 365 nm Pack size: 1 piece Special features Interchangeable, self-supporting gooseneck High‑power 365 nm UV LED Compatibility with NZ.9018, LE.5207, LE.5212 Current plug version FAQ Is this light guide compatible with older Euromex illumination bases? The LE.5261 is specified for use with Euromex NZ.9018, LE.5207 and LE.5212 bases; compatibility with other or older bases should be verified against the base connector and power specifications. Can the gooseneck be repositioned during delicate observations without introducing vibration? The self-supporting gooseneck design is intended to hold position once aligned, providing stable illumination for delicate microscopy tasks with minimal disturbance. What is the functional benefit of the 365 nm wavelength? A 365 nm UV LED provides ultraviolet illumination that enhances fluorescence contrast and highlights features that are less visible under visible-spectrum lighting, improving inspection clarity. Is the LE.5261 supplied ready to install? The module is supplied as a single unit in the current plug version and is prepared for direct installation into compatible Euromex illumination mounts. Does the light guide require additional accessories for operation? No additional accessories are listed; the LE.5261 is an exchangeable light-guide unit designed for direct integration with the specified Euromex bases. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37.5mm 4x Microscope Objective 0.10 NA Working Distance 37.5 mm - Euromex
Take advantage of the combination of reliable low‑magnification imaging, a generous working distance and clear optical specifications for efficient sample inspection. Order directly via Metav Werkzeuge or consult the Metav team for integration advice. Microscope objective AE.5591 — 4× magnification, NA 0.10, long working distance (Euromex) Microscope objective AE.5591 delivers low‑magnification overview imaging for educational and routine inspection tasks, offering a balance of field of view and sample access. 4× magnification for overview imaging 37.5 mm working distance for sample access Numerical aperture 0.10 for clear low‑mag observations Faster inspection through clear, low‑magnification optics The combination of 4× magnification and a numerical aperture of 0.10 provides a practical balance between field size and image contrast, making the objective well suited to rapid visual screening and alignment tasks. At low magnification the optical design emphasises a broad field of view and stable contrast rather than extreme resolving power; this means larger samples and assemblies can be examined without frequent refocussing. The specified 37.5 mm working distance further supports handling and manipulation of specimens under the lens, enabling measurement fixtures or probing tools to be used without compromising the working clearance. Practical benefits for laboratory and teaching environments A low‑power objective with a wide depth of field improves the usability of microscopes in multi‑user settings where fast, repeatable results are required. The modest numerical aperture reduces sensitivity to slight illumination changes, which simplifies setup with reflectors, LED rings or transmitted light stages commonly found in teaching and quality control benches. This results in more consistent images during routine checks and reduces the time needed for operator training. The optical specification is therefore an asset where throughput and straightforward handling are priorities. Clear specifications for system integration and selection Specification details are concise and measurable: magnification 4×, numerical aperture 0.10 and working distance 37.5 mm (listed as 4x/0.10 SMP objective, WD 37.5 mm in the manufacturer PDF). These figures allow direct comparison with other objectives when planning optical chains, camera matching or specimen staging. The straightforward optical parameters support predictable imaging behaviour and help with decisions on camera sensor size, eyepiece selection and illumination strategy. For the microscope objective AE.5591, the available data from the manufacturer’s education materials enables rapid assessment for educational labs, inspection stations and similar use cases. For procurement or technical advice on integration with existing microscope stands, contact Metav Werkzeuge — the Metav team can advise on compatibility and supply arrangements from Emmerich. Technical Data Article number: AE.5591 SKU: AE.5591 Manufacturer: Euromex Product type: Microscope objective Facts Magnification: 4× Working distance: 37.5 mm Numerical aperture: 0.10 Special features 4x/0.10 SMP objective specification Source: Education PDF‑S. 13 FAQ What magnification does this objective provide? The objective offers 4× magnification, suitable for overview imaging and initial inspection tasks with the Euromex microscope objective AE.5591. How much working distance is available for sample handling? The objective specifies a 37.5 mm working distance, providing ample clearance for probes, fixtures or manipulation during inspections. What level of resolution can be expected from a numerical aperture of 0.10? A numerical aperture of 0.10 gives good contrast and sufficient resolving power for low‑magnification applications; it is optimised for overview and alignment rather than fine microstructural analysis. Is this objective suitable for educational or routine inspection use? Yes; the combination of wide field of view, stable contrast and extended working distance makes the AE.5591 well suited to education, quality control and general inspection benches. Where are the specification details sourced from? Specifications are taken from the manufacturer’s documentation (Education PDF‑S. 13) and are summarised for clear comparison in the technical data above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37.5mm Microscope Objective 4x 0.10 NA, WD 37.5 mm - Euromex
Take advantage of the combination of 4x magnification, a 37.5 mm working distance and a numerical aperture of 0.10 for straightforward low-power inspection and sample handling; order the objective via Metav Werkzeuge or contact the consultants for clarification. EcoBlue EC.7004 — 4x microscope objective, 37.5 mm working distance EcoBlue EC.7004 is a 4x microscope objective designed for routine low-power observation and inspection tasks in education and laboratory environments 4× magnification for low-power overview Long 37.5 mm working distance Numerical aperture 0.10 for clear contrast Part of the EcoBlue objective series Clear overview with reliable low-power optics The 4x setting of this objective provides a broad field of view that is suitable for preliminary inspection, specimen orientation and teaching demonstrations. The numerical aperture of 0.10 balances depth of field and contrast, which helps to render coarse structural details distinctly while keeping focus tolerances forgiving. For users who need a dependable low-power lens, the combination of magnification and aperture enables faster sample assessment without frequent objective changes, supporting efficient workflows in laboratories and classrooms. Spacious working distance for safe sample handling A working distance of 37.5 mm gives additional room between the front lens and the specimen, reducing the risk of collisions with stages, clamps or tall samples. This clearance simplifies positioning, lighting and manipulation of parts or slides, which is particularly helpful during assembly checks, quality control or educational demonstrations. The greater distance also eases use with bulky holders and non-standard sample mounts, so handling is more comfortable and accidental damage is less likely. Practical compatibility and consistent quality for routine use Built as part of the EcoBlue series by Euromex, this objective integrates into standard microscope objective turrets and supports common inspection tasks. The design focuses on pragmatic performance: reliable optical parameters, straightforward interchangeability and low-maintenance serviceability. For workshops and teaching environments looking to democratise precision, the lens brings consistent results without unnecessary complexity, while Metav’s distribution ensures reliable supply and product guidance when required. Contact Metav Werkzeuge for expert advice on integration and to secure delivery from Emmerich for prompt replenishment of workshop supplies Technical data Article number: EC.7004 Manufacturer: Euromex Model series: EcoBlue Product type: Microscope objective Data Magnification: 4x Working distance: 37.5 mm Numerical aperture: 0.10 Special features Label: Mikroskopobjektiv EcoBlue EC.7004 Category path: Microscopy accessories > Objectives > for microscopes Source: Education PDF page 9 (4x/0.10 objective, WD 37.5 mm) FAQ What magnification does the objective provide? The EcoBlue EC.7004 is a 4x microscope objective, offering low-power magnification for wide-field observation. How does the numerical aperture affect image quality? A numerical aperture of 0.10 on this objective improves contrast at low magnification, making structural details easier to discern while maintaining useful depth of field. Is the working distance sufficient for bulky samples? Yes, the 37.5 mm working distance of the EcoBlue EC.7004 provides ample clearance for larger fixtures and sample holders during inspection. Can this objective be used in teaching and routine inspection? The design and optical parameters make the EcoBlue EC.7004 well suited to classroom demonstrations and routine laboratory or workshop inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
37mm 4x Microscope Objective 0.10 NA, 37.0 mm Working Distance - Euromex
Take advantage of the combination of reliable low‑magnification imaging, a long working distance and consistent optical data to streamline sample handling and routine inspection. Order the Euromex bScope BS.7104 directly via Metav Werkzeuge or ask the consultants for further specification support. bScope BS.7104 – Euromex 4x microscope objective, 0.10 NA A bScope BS.7104 microscope objective engineered for low‑magnification overview imaging and comfortable sample access with an extended working distance. 4x magnification for overview imaging 37.0 mm working distance Numerical aperture 0.10 for broad depth Reliable overview imaging with measurable optical performance The 4x low‑power design delivers a wide field of view while maintaining sufficient detail for inspection and documentation tasks. With a numerical aperture 0.10, the lens provides a broad depth of field, which reduces the need for frequent refocusing during routine workflows and supports consistent image capture across uneven samples. These measurable optical specifications allow planners and technicians to predict imaging behaviour and integrate the lens into existing optical chains with confidence. Practical handling and integration into laboratory workflows A 37.0 mm working distance offers ample space for sample manipulation, tooling and lighting without compromising image quality. This spacing is particularly useful in teaching labs and life‑science setups where accessibility is as important as optical performance. The specification sheet notes the lens as a 4x/0.10 objective; in practical terms this means the lens balances field size, contrast and specimen clearance for everyday microscopy tasks. Compatibility with standard nosepieces and common mounting conventions ensures straightforward installation. Confidence in selection and ongoing support from Metav Optical choices influence throughput and reproducibility. The objective’s quantified parameters enable a rational selection based on task requirements rather than guesswork, reducing downtime and rework. As part of Metav’s offering, customers benefit from a centralised supply approach and experienced advice that supports decision‑making for workshops and laboratories alike. If further technical data is required, the Metav team can supply datasheets and guidance to match the objective to specific instruments and applications. Contact Metav Werkzeuge for tailored advice on Euromex optics and dependable delivery from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: BS.7104 SKU: BS.7104 Brand: Euromex Model series: bScope Product type: microscope objective Label: Mikroskopobjektiv bScope BS.7104 Description: Mikroskopobjektiv bScope BS.7104. Vergrößerung: 4x; Arbeitsabstand: 37.0 mm; Numerische Apertur: 0.10 Facts Magnification: 4x Working distance: 37.0 mm Numerical aperture: 0.10 Special features Application: For microscopes Series: bScope Manufacturer article number: BS.7104 FAQ What magnification does this objective provide? The Euromex bScope BS.7104 is specified as a 4x objective, suitable for low‑power overview imaging. What is the working distance and why does it matter? The working distance is 37.0 mm; this affords space for sample handling, fixtures and illumination while maintaining focus stability. How does the numerical aperture affect images? A numerical aperture of 0.10 trades higher resolution for a larger depth of field, which is beneficial for inspecting uneven or thicker specimens. Is this objective suitable for educational and life‑science use? Yes, the combination of 4x magnification and a long working distance makes the objective well suited to teaching labs and routine life‑science observation. Where can further technical documentation be obtained? Detailed specification sheets and sourcing information are available from Metav Werkzeuge; the product is listed as BS.7104 and marketed under the Euromex bScope series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
395mm Gooseneck Light Guide With 395nm Violet LED, Interchangeable Self‑Supporting - Euromex
Benefit from a modular, workshop-ready lighting solution that combines an interchangeable, self-supporting gooseneck with a 395 nm high‑power violet LED to improve visual contrast and simplify maintenance; order the part directly via Metav Werkzeuge or contact their consultants for advice. Light Guide LE.5262 — interchangeable gooseneck with 395 nm violet LED (Euromex) The Light Guide LE.5262 is an auxiliary illumination module designed for close‑range inspection and microscope lighting, providing compact, targeted near‑violet light for improved detail visibility. Interchangeable self-supporting gooseneck 395 nm high-power violet LED Fits NZ.9018, LE.5207 and LE.5212 Supplied in the current plug version Precise contrast with concentrated near‑violet illumination The LE.5262 uses a 395 nm wavelength near‑violet LED, offering concentrated light that improves contrast on fine details and subtle surface features without enlarging the lighting footprint. The focused emission is especially useful where visible‑light sources fail to reveal faint marks or edges; in practice this means clearer inspection results and fewer repeat checks. The description of the wavelength clarifies the spectral range for technicians assessing material response to near‑violet light. Quick positional adjustment and low‑effort handling An interchangeable, self‑supporting gooseneck enables rapid, tool‑free positioning above the workpiece, reducing setup time at the bench. The design removes the need for additional clamps or supports and allows precise aiming of the near‑violet LED beam. The unit is supplied in the current plug version, ensuring compatibility with modern illumination ports and simplifying replacement in existing assemblies. Keeps spare parts and service simple Compatibility with models NZ.9018, LE.5207 and LE.5212 makes the module a practical choice for labs and workshops that maintain mixed Euromex lighting equipment. The modular format reduces the number of bespoke spare parts required and shortens maintenance cycles, which supports continuous production and inspection processes while keeping inventory straightforward. Durable accessory for inspection and microscopy lighting Built for repeated positioning, the LE.5262’s self‑supporting neck retains its shape during routine use, preserving beam alignment over time and reducing the frequency of readjustment. As an accessory intended for microscopy lighting and inspection stations, the module contributes to consistent illumination quality and dependable visual checks, helping teams reach reliable decisions faster and with greater confidence. For precision inspection lighting, request the Euromex Light Guide LE.5262 through Metav Werkzeuge — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and procurement support Technical Data Manufacturer article number: LE.5262 SKU: LE.5262 Product type: Light guide Packaging: 1 piece Manufacturer: Euromex Facts Wavelength: 395 nm Compatible models: NZ.9018, LE.5207, LE.5212 Special features Interchangeable, self-supporting gooseneck High‑power violet LED Current plug version Supplied as 1 piece FAQ Which inspection systems is this light guide compatible with? The Euromex Light Guide LE.5262 is compatible with NZ.9018, LE.5207 and LE.5212 inspection and microscope lighting modules. What wavelength does the LED use and what is the benefit? The LE.5262 features a 395 nm high‑power violet LED; this near‑violet emission enhances contrast on fine details and can make subtle surface features easier to distinguish during visual inspection. Can the gooseneck be positioned without extra supports? Yes, the interchangeable, self‑supporting gooseneck of the LE.5262 holds its position without additional clamps, enabling precise alignment above the workpiece. How is the product supplied and what connector version is included? The light guide is supplied as a single unit (1 piece) and comes in the current plug version for straightforward integration with compatible Euromex lighting modules. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3W LED Replacement Microscope Lamp Delphi-X Observer DX.9993 - Euromex
Take advantage of a compact, energy‑efficient 3 W LED replacement that restores consistent illumination to Delphi‑X Observer microscopes; the robust LED design reduces specimen heating and lowers maintenance intervals. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Euromex Delphi‑X Observer DX.9993 — 3 W LED replacement for Delphi‑X Observer microscopes The Delphi‑X Observer DX.9993 is a purpose‑built replacement LED illumination unit for Delphi‑X Observer microscopes, intended to provide steady, low‑heat lighting for laboratory and teaching environments. 3 W LED replacement lamp Compatible with Delphi‑X Observer series Long‑life, low‑heat LED technology Stable, efficient illumination for routine microscopy The 3 W LED module delivers a steady white light output designed for continuous observation in life‑science and educational settings. Compared with older halogen lamps, the LED variant provides lower thermal load on specimens and optical components, which helps preserve delicate samples during prolonged examinations. The reduced energy consumption of the LED unit also contributes to operational efficiency in busy workflows, supporting predictable illumination without frequent lamp changes. Direct replacement designed for Delphi‑X Observer installations This replacement lamp is manufactured as a drop‑in illumination unit for the Delphi‑X Observer series and carries the item code DX.9993 for unambiguous identification. The compact format and standardised electrical rating simplify stock management and spare‑parts planning in laboratories and teaching workshops. As a compatible replacement component, the unit supports uninterrupted use of existing microscopes while maintaining the optical performance expected from the original system. Low maintenance and extended service life for dependable use LED technology offers a markedly longer service life than conventional bulbs, translating into fewer replacements and lower lifecycle handling. The long‑life LED characteristic reduces downtime and maintenance costs, which is advantageous for facilities that require dependable daily operation. Because the light source produces less heat, heat‑sensitive optics and specimens benefit from a more stable operating environment, which supports process reliability and repeatable observation results. Practical suitability across laboratories and education The replacement unit is suitable for a range of standard microscopy tasks in schools, teaching laboratories and basic research facilities where consistent, low‑heat illumination is required. The energy‑efficient LED solution helps laboratories align with practical sustainability goals while maintaining the clarity and contrast necessary for routine inspections and demonstrations. For additional technical specifications or compatibility checks, the product documentation and parts lists should be consulted to confirm fitment within existing instrument configurations. For reliable illumination and spare‑parts continuity, request the Euromex Delphi‑X Observer DX.9993 through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and supply options. Technical data Article number: DX.9993 Brand: Euromex Series: Delphi‑X Observer Product type: Microscope replacement illumination Facts Power: 3 W LED Special features Replacement for Delphi‑X Observer microscopes Low‑heat LED technology Item code: DX.9993 FAQ What is the light source and power rating of the replacement unit? The replacement unit uses a 3 W LED light source; the Euromex Delphi‑X Observer DX.9993 is specified as a 3 W LED replacement for the Delphi‑X Observer series. Is the DX.9993 compatible with all Delphi‑X Observer microscope models? The DX.9993 is intended as a replacement illumination unit for the Delphi‑X Observer series; compatibility should be verified against the instrument parts list to confirm mechanical and electrical fit. How does the LED replacement affect specimen heating compared with older lamps? The LED technology in the DX.9993 produces considerably less heat at the specimen plane than traditional halogen bulbs, reducing thermal impact on sensitive samples and nearby optics. What operational benefits does the LED replacement provide for teaching labs? The unit offers longer service life and lower maintenance demand, delivering consistent illumination for demonstrations and extended teaching sessions while cutting the frequency of lamp changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3W NeoLED Replacement Unit SL.5503, 3 W - Euromex
Take advantage of consistent 3 W LED illumination and a compact replacement design for dependable microscope lighting—ideal for laboratories and workshops that require steady, energy-efficient light. Order or request advice via Metav Werkzeuge for supply from the Emmerich hub. NeoLED replacement unit 3 W SL.5503 — Euromex microscope replacement lamp, 3 W LED The NeoLED replacement unit 3 W SL.5503 is a compact microscope replacement lamp designed to deliver uniform illumination for routine inspection and laboratory use, suitable for microscopy lighting applications. Compact 3 W LED module Stable colour temperature for imaging Easy, tool-free replacement Low power consumption Consistent illumination that supports precise inspection The NeoLED replacement unit provides steady, glare‑free illumination with a rated output of 3 W, which is well suited to common microscopy tasks. The low wattage is translated into efficient light generation by the LED technology, enabling uniform lighting across the field of view and reducing the need for frequent readjustment. For users who rely on consistent visual conditions—whether for quality control, education or routine laboratory work—this illumination unit helps maintain reliable observation results by keeping brightness and colour rendering stable during sessions. Efficient operation and straightforward maintenance Thanks to the LED design, the unit offers energy-efficient operation and extended service life compared with traditional filament bulbs. The compact module is conceived for straightforward replacement, minimising downtime: the design reduces the steps required to swap the lamp and avoids complex calibration afterward. This translates into better productivity on the workbench and lower recurring maintenance effort, making the module a practical choice where simple, reliable illumination is preferred over elaborate lighting systems. Flexible use across microscopy applications The replacement unit is intended for microscope lighting and fits within the lighting and microscopy accessories category, making it adaptable for a wide range of inspection and teaching instruments that accept NeoLED modules. Its combination of LED efficiency and compact dimensions supports both bench microscopes and portable rigs where space and heat management are important. With the Euromex designation and the SKU SL.5503, procurement and inventory identification are simplified for workshop and laboratory supply chains. Choose the Euromex NeoLED replacement unit SL.5503 for dependable 3 W LED illumination and contact Metav Werkzeuge for tailored advice or to secure supply from our Emmerich hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SL.5503 SKU: SL.5503 Brand: Euromex Product type: Microscope replacement lamp Label: NeoLED-Ersatzeinheit 3 W SL.5503 Core specifications Power: 3 W Features and compatibility LED replacement unit Category: Lighting / Microscopy accessories / Bulbs Manufacturer: Euromex FAQ What power rating does the replacement unit have? The NeoLED replacement unit SL.5503 is rated at 3 W, providing efficient LED illumination for microscope applications. Is this module suitable for routine laboratory inspection? Yes, the Euromex NeoLED replacement unit is designed to deliver stable and uniform illumination, making it suitable for regular inspection and educational use. Can the lamp be replaced without specialist tools? The unit is intended for straightforward replacement and minimal maintenance, reducing downtime during lamp changes. Will the NeoLED replacement unit affect image colour rendering? The LED design emphasises a stable colour temperature to maintain consistent visual conditions, which supports reproducible observations. How is the product identified for procurement? The lamp is listed under SKU SL.5503 and labelled NeoLED replacement unit 3 W SL.5503 for clear identification in supplies and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.3mm Plan PLMi 20x/0.40 IOS Objective Infinity Corrected No Cover Glass Correction - Euromex
Benefit from a combination of precise optics and a compact working distance to maintain sharp images in confined setups. The Plan PLMi 20x/0,40 IOS delivers consistent intermediate magnification and optical flatness; order the objective directly via Metav Werkzeuge or ask our consultants for compatibility advice. Plan PLMi 20x/0,40 IOS IS.8120 — Euromex microscope objective, 20x, 0.40 NA, 4.3 mm working distance A Plan PLMi 20x/0,40 IOS microscope objective designed for infinity‑corrected optical systems, offering stable intermediate magnification and a short working distance for compact inspection setups 20x magnification for clear intermediate detail Numerical aperture 0.40 for improved resolution 4.3 mm working distance for compact setups Infinity-corrected design, no cover glass correction Optimised intermediate magnification for detailed imaging The optical unit provides 20x magnification combined with a 0.40 numerical aperture, delivering a balance between field of view and resolving power. The increased numerical aperture improves light gathering and detail resolution, which is particularly beneficial when inspecting medium‑sized structures. The Plan correction ensures a flat field across the image, reducing peripheral aberrations and making measurements and documentation more reliable. This level of optical control supports repeatable results in routine laboratory and shop‑floor inspections. Short working distance for space‑constrained applications With a 4.3 mm working distance, this objective suits setups where stage clearance is limited or where compact condensers are used. The no cover glass correction specification indicates that the lens is optimised for direct specimen observation without a coverslip; this reduces focal shift and maintains image fidelity when examining thicker or uncovered samples. Attention to the working distance helps prevent collisions and supports safe integration into enclosed inspection rigs or compact microscope stands. Designed for modular, infinite‑corrected systems The objective is infinity‑corrected, meaning the optical projection beyond the objective is collimated and requires a compatible tube lens to form the final image. This architecture enables flexibility: objectives can be combined with different tube lenses for system‑level optimisation without changing the primary lens performance. The Plan PLMi design and IOS designation indicate high planarity and system compatibility, allowing straightforward exchange within any microscope stand built for infinite optics. For reliable supply and industry‑grade distribution, Metav provides technical guidance and consistent stock handling from its Emmerich facility. For guidance on system compatibility and to discuss exact optical requirements, contact Metav Werkzeuge for an expert recommendation on the Euromex Plan PLMi 20x/0,40 IOS objective — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.8120 SKU: IS.8120 Manufacturer: Euromex Product type: microscope objective Data Magnification: 20x Numerical aperture: 0.40 Working distance: 4.3 mm Special features Plan PLMi optical correction Infinity‑corrected design (IOS) No cover glass correction FAQ What optical systems is this objective compatible with? The Plan PLMi 20x/0,40 IOS objective is intended for infinity‑corrected microscope systems and must be used with an appropriate tube lens to form the image. Can this objective be used with cover slips? This objective has no cover glass correction, so optimal performance is achieved on specimens without a coverslip; using a cover slip may introduce spherical aberration not compensated by the lens design. How does the 0.40 numerical aperture affect image quality? A 0.40 NA provides enhanced resolution and light collection compared with lower NA lenses, improving detail visibility at 20x magnification while maintaining a practical depth of field. Is the working distance sufficient for sample holders and accessories? The 4.3 mm working distance is relatively short and suits compact setups; care should be taken with tall sample holders or accessories to avoid contact with the front lens. What is the article number for ordering and reference? The objective is listed as IS.8120, which should be used as the reference when enquiring about the Euromex Plan PLMi 20x/0,40 IOS microscope objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4.80mm 10x Microscope Objective 0.25 NA, 4.80 mm Working Distance - Euromex
Take advantage of the combination of reliable optical specifications and compact working distance for consistent imaging in teaching and routine laboratory tasks; order the microscope objective directly via Metav Werkzeuge or contact our consultants for technical advice. BioBlue.Lab BB.7210 microscope objective — 10x, numerical aperture 0.25 (Euromex) BioBlue.Lab BB.7210 is a 10x microscope objective designed for routine observation and educational life-science applications, offering a short working distance for close-focus requirements. 10x magnification for general observation Numerical aperture 0.25 for clear resolution 4.80 mm working distance for sample clearance Part of the BioBlue.Lab series for consistent optics Reliable imaging performance for everyday microscopy The BB.7210 objective delivers 10x magnification with a numerical aperture 0.25, providing a dependable balance between resolution and depth of field. The optical design supports clear detail reproduction on common brightfield setups, making it suitable where repeatable results are required. The combination of magnification and aperture enables more accurate visual inspection than low-power wide-field optics, which helps maintain consistent documentation and faster sample assessment in teaching and routine lab environments. Compact working distance for close-up sample work With a 4.80 mm working distance, this objective is configured for applications where proximity to the specimen is important. The short working distance reduces the need for large stage movements and supports fine focus control on thin or mounted samples. This physical spacing is particularly useful when working with coverslips, thin sections or preparations under immersion objectives in series, where maintaining a predictable sample-to-lens gap improves handling and reduces the risk of collisions during routine operation. Simple integration and clear specification for selection The objective is specified as a 10x/0.25 PLi design in the manufacturer documentation, making the optical parameters transparent for system planning and objective matching. Its designation and measured values simplify objective selection for educational microscopes and basic laboratory instruments. The clear numerical data supports procurement and compatibility checks, helping workshop managers and laboratory buyers to plan inventory and ensure that replacement optics meet expected imaging standards without extensive reconfiguration. For reliable optical performance and uncomplicated procurement of the BioBlue.Lab BB.7210, contact Metav Werkzeuge for ordering or consult their technical team at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific microscope setups Technical Data Article number: BB.7210 SKU: BB.7210 Brand: Euromex Model series: BioBlue.Lab Product type: Microscope objective Facts Magnification: 10x Numerical aperture: 0.25 Working distance: 4.80 mm Special features Designation: 10x/0.25 PLi objective Category: For microscopes / Objectives Documentation: Education and Life Science references FAQ What are the core optical specifications of this objective? The BioBlue.Lab BB.7210 microscope objective from Euromex is specified as 10x magnification with a numerical aperture of 0.25 and a working distance of 4.80 mm (SKU BB.7210). Is this objective intended for educational use? Yes, the technical documentation references education and life-science materials, indicating that the objective is suitable for teaching laboratories and general life-science observation. Can the BB.7210 be used on standard laboratory microscopes? The objective is listed in the category for microscopes and is intended for integration into standard objective turrets and brightfield systems; compatibility should be checked against the specific microscope's mounting standard. Where can the exact designation and source references be found? The objective is referenced as a 10x/0.25 PLi design in the manufacturer documentation and associated education and life-science PDFs for quick verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm 40x Achios-X Observer Microscope Objective 0.7 mm Working Distance 0.65 NA - Euromex
Take advantage of the combination of 40x magnification, a 0.7 mm working distance and a numerical aperture of 0.65 for crisp, high‑contrast imaging in close‑range life‑science inspection; order the objective directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. Achios‑X Observer AX.7740 microscope objective — 40x, NA 0.65 (Euromex) The Achios‑X Observer AX.7740 is a 40x microscope objective designed for high‑resolution life‑science observation with a short working distance and elevated numerical aperture. 40x magnification, high-resolution optics Numerical aperture 0.65 for improved contrast Working distance 0.7 mm for close inspection Sharper detail through a high numerical aperture The AX.7740 features an NA of 0.65, which directly enhances resolution and image contrast by collecting a larger cone of light from the specimen. A higher numerical aperture reduces the smallest resolvable detail, so structures that would otherwise blur are rendered with greater clarity. The optical configuration—listed as PLPHi in the original specification—supports improved detail rendition in brightfield and similar transmitted‑light techniques. For routine inspection tasks where discerning fine morphology or subtle contrast differences matters, the elevated NA delivers a measurable advantage in image quality and diagnostic confidence. Optimised for close‑range observation and delicate samples With a 0.7 mm working distance, this objective is tailored to close‑range inspection of thin specimens and coverslip preparations. The short clearance improves optical coupling to the specimen, contributing to sharper images, but it also requires careful sample handling and appropriate stage movement to avoid contact. For specimen mounting, standard coverslip thicknesses and low‑profile holders are recommended to preserve the working distance and focus range. Where larger sample clearance is necessary, consider alternative objectives with greater working distances; however, for tasks demanding fine surface detail or high contrast at medium magnification, the compact gap of this objective is a design advantage. Reliable performance for laboratory workflows Manufactured by Euromex, the AX.7740 is part of a series engineered for consistent day‑to‑day use in laboratory environments. The design supports reproducible observations and integrates into established imaging routines without extensive recalibration. For purchasers seeking dependable supply and fast delivery within Europe, Metav supports procurement and technical clarification from its Emmerich location. If additional technical data or clarification on mechanical fitment is required, the product specification references the Life Science PDF (source: Life Science PDF, p. 21), which lists the 40x/0.65 PLPHi configuration and the 0.7 mm working distance for precise verification. For precise ordering or technical advice on the Euromex AX.7740, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for assistance with instrument compatibility and delivery options. Technical Data Article number: AX.7740 Manufacturer: Euromex Product type: Microscope objective Model series: Achios‑X Observer Source: Life Science PDF, p. 21 Facts Magnification: 40x Working distance: 0.7 mm Numerical aperture: 0.65 Special features PLPHi design For microscopes (objective for life‑science observation) SKU: AX.7740 FAQ What does a numerical aperture of 0.65 mean for imaging performance? A numerical aperture of 0.65 indicates a larger light‑gathering ability, which improves resolution and contrast; with the AX.7740 this results in finer detail and clearer microstructure rendition compared with lower‑NA objectives. Is the AX.7740 suitable for thick or bulky samples? The 0.7 mm working distance makes this objective best suited to thin specimens and standard coverslip preparations; bulky or tall samples will likely require an objective with a greater working distance. What does the PLPHi designation indicate? PLPHi refers to the optical correction and design family used in the objective; it denotes a plan‑type, high‑performance configuration optimised for flat, high‑resolution imaging across the field of view. How should the objective be cleaned and maintained? Clean optical surfaces with appropriate lens tissue and a small amount of lens cleaner; avoid abrasives and strong solvents. Handle the objective by the barrel and store in a dust‑free case when not in use to preserve performance. Which microscopes is this objective compatible with? Compatibility depends on the mechanical turret and tube length of the microscope; the AX.7740 belongs to the Achios‑X Observer series and should be checked against the instrument specifications for mechanical fit and parfocality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm 40x bScope Microscope Objective 0.66 mm Working Distance NA 0.65 - Euromex
Combining 40x magnification, numerical aperture 0.65 and a 0.66 mm working distance, this objective supports high‑resolution, close‑range inspection in laboratory and life‑science settings. Order the microscope objective directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. Microscope objective bScope BS.8740 — 40x magnification, NA 0.65 (Euromex) The Microscope objective bScope BS.8740 is an objective lens for laboratory and life‑science microscopy, optimised for high numerical aperture imaging and precision short‑focus applications. 40x magnification for detailed imaging Numerical aperture 0.65 for higher resolution Working distance 0.66 mm for close focus Sharper details through a high numerical aperture A numerical aperture (NA) of 0.65 significantly increases light collection and angular acceptance compared with lower‑NA objectives, which directly improves resolution and image contrast in transmitted‑light and high‑detail observation tasks. In practical terms, this means finer structural detail is resolved at the sample plane, reducing the need for repeated scans and accelerating image‑based inspections. The optical performance is ideally suited to applications where visual clarity and measurement certainty influence downstream decisions in quality control and research. Optimised for close‑range, high‑resolution inspection The short working distance of 0.66 mm places the front lens very close to the specimen, enabling higher numerical apertures and tighter focus on thin samples, coverslips or surface features. Such proximity benefits applications that demand exceptional spatial resolution, though it requires careful focusing and awareness of sample clearance during setup. For routine laboratory workflows, the compact focal geometry supports precise imaging of microstructures while helping to keep optical path lengths short for stable, repeatable results. Consistent optical performance for laboratory workflows At 40x magnification, the objective delivers a practical balance between field of view and detail, making it suitable for a variety of analytical and inspection tasks within microscopy-equipped workshops and laboratories. Built as part of the bScope series, the component is intended to integrate into standard microscope turret systems, offering predictable imaging characteristics from sample to sample. Where repeatability and traceable observation matter, this objective contributes to faster decision cycles and fewer inconclusive inspections; Metav’s product specialists can assist with mounting and alignment considerations. Request a technical compatibility check from Metav Werkzeuge to confirm integration of the bScope BS.8740 into existing microscope setups and to discuss application‑specific recommendations Technical Data Article number: BS.8740 SKU: BS.8740 Manufacturer: Euromex Model series: bScope Product type: Microscope objective Facts Magnification: 40x Working distance: 0.66 mm Numerical aperture: 0.65 Special features Intended for laboratory and life‑science microscopy High numerical aperture design Short working distance for close inspection FAQ What is the numerical aperture of this objective? The numerical aperture of the Microscope objective bScope BS.8740 is 0.65, supporting improved resolution and light‑gathering capability. What working distance does the BS.8740 offer? The bScope BS.8740 provides a working distance of 0.66 mm, designed for close‑range observation of thin specimens. Which magnification level is this objective designed for? This objective is specified at 40x magnification (SKU BS.8740), offering a balance between field of view and detail for laboratory imaging. Is the objective suitable for high‑resolution imaging tasks? Yes, the combination of 40x magnification and NA 0.65 in the bScope BS.8740 supports high‑resolution imaging where fine detail is required. How does the short working distance affect handling? A working distance of 0.66 mm requires careful focusing and sample clearance; the bScope BS.8740 is optimised for controlled laboratory setups where sample thickness is compatible. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
40mm 40x Microscope Objective 0.6 mm Working Distance NA 0.65 - Euromex
High magnification 40x combined with a 0.65 numerical aperture and a 0.6 mm working distance gives sharp, high-resolution images of thin specimens, suited to routine laboratory and educational use. Order the EcoBlue EC.7040 microscope objective directly via Metav Werkzeuge or ask our consultants if needed. EcoBlue EC.7040 — Euromex microscope objective, 40x / NA 0.65 The EcoBlue EC.7040 is a 40x microscope objective designed for high-resolution imaging in educational and routine laboratory microscopy. 40x magnification for detailed observation Numerical aperture 0.65 for high resolution 0.6 mm working distance for close-focus imaging Part of the EcoBlue series by Euromex Delivering crisp detail for routine and educational inspections The combination of 40x magnification and a 0.65 numerical aperture provides noticeably higher resolving power compared with lower-NA optics, so fine structures become visible under normal transmitted-light conditions. The relatively short 0.6 mm working distance supports close focusing on thin preparations, making this objective particularly suitable for slides where fine contrast and sharpness matter. This specification set addresses the typical requirement in laboratories and teaching environments for precise visual assessment without complex setup. What the optics mean in practice and why it matters The numerical aperture indicates the objective's ability to gather light and resolve detail: a higher value improves resolution and contrast at high magnifications. The working distance denotes the physical gap between the objective front lens and the specimen when in focus; at 0.6 mm, care with slide thickness and coverslip is recommended, but the proximity supports enhanced image quality for thin samples. These optical parameters explain why the objective excels at resolving fine cellular structures and small features on prepared slides, translating technical numbers into practical advantages for inspection and teaching. Smooth integration into standard microscopy workflows As a member of the EcoBlue series, this objective is specified for conventional microscope applications and education-oriented labs that require reliable, repeatable imaging. The product designation and SKU (EC.7040) make it straightforward to reference in instrument inventories and training materials. The optical data allow technicians and educators to match the objective to illumination and condenser settings for optimal imaging, reducing trial-and-error and enabling consistent results during demonstrations or routine inspections. Support for selection and further technical clarifications If uncertainty remains about suitability for a particular microscope or sample type, the detailed specifications in the accompanying technical documentation can be consulted. Practical guidance is available on matching condenser apertures and illumination settings to the optical parameters to achieve the best contrast and resolution. For additional technical information or clarification, Metav Werkzeuge provides assistance by e‑mail or phone to help determine whether this objective meets specific application requirements. For precise 40x observations and specification advice on the Euromex EcoBlue EC.7040 microscope objective (SKU EC.7040), contact Metav Werkzeuge for ordering and technical support by phone or e‑mail Technical Data Article number: EC.7040 SKU: EC.7040 Manufacturer: Euromex Model series: EcoBlue Product type: Microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.6 mm Special features S40x/0.65 objective specification Source: Education PDF‑S. 9 Series: EcoBlue FAQ What magnification and optical performance does this objective provide? The Euromex EcoBlue EC.7040 microscope objective delivers 40x magnification with a 0.65 numerical aperture, providing improved resolution for fine details on thin specimens. Is the short working distance a limitation for common slides? A 0.6 mm working distance requires attention to slide and coverslip thickness; however, for standard thin preparations this short distance supports high‑quality images and better resolution. Which applications are best suited to this objective? This objective is intended for routine laboratory and educational microscopy where high detail and contrast are required, such as histology teaching slides or basic cell observation. How to reference the product when ordering or specifying equipment? Reference the Euromex EcoBlue EC.7040 microscope objective by name or by SKU EC.7040 to ensure the correct 40x/0.65 specification is supplied. Where can further technical details be found? Technical details and original specification notes are available in the Education PDF (source: Education PDF‑S. 9) and further clarification is available from Metav Werkzeuge if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm 40x Microscope Objective 0.64 mm Working Distance 0.65 NA - Euromex
Take advantage of the combination of 40× magnification, 0.65 numerical aperture and a short 0.64 mm working distance for crisp, high‑resolution observation of prepared slides; order or request guidance via Metav Werkzeuge for reliable supply and technical advice. bScope BS.7140 Microscope Objective — 40×, NA 0.65 (Euromex) The bScope BS.7140 is a 40× microscope objective engineered for close‑focus laboratory and educational microscopy applications, delivering a numerical aperture of 0.65 and a working distance of 0.64 mm. 40× magnification for detailed observation High numerical aperture 0.65 for improved resolution Short working distance 0.64 mm for close focusing Designed for laboratory and educational microscopes Optimised optics for improved image detail The objective combines a 40× magnification with a 0.65 numerical aperture, which together increase the system’s light‑gathering ability and resolution. A higher numerical aperture reduces diffraction limits and enables finer structural detail to be resolved from stained specimens and thin sections. This optical specification is particularly relevant where image clarity and contrast are essential for analysis, teaching or routine inspection. Design that supports precise sample work A working distance of 0.64 mm means the front lens is close to the specimen plane, enabling high‑power focusing on standard prepared slides. Short working distances demand careful sample handling but reward users with sharper focal planes and improved contrast at high magnification. For workflows where thin samples and fine structural detail are typical, this configuration delivers measurable benefits in outcome and throughput. Practical suitability and common applications The objective is intended for use with standard laboratory and educational microscopes and is referenced in both education and life‑science product documentation. Typical uses include biological teaching, routine cell observation and detailed inspection of prepared histological slides. The optical characteristics make the component well suited to situations where resolution and contrast are prioritised over working clearance. Confidence in supply and ongoing support Sourcing precision optics from a reputable line assures consistent performance in everyday use. Metav’s approach to democratising precision means reliable availability from the Emmerich distribution point and a broad selection of complementary microscope accessories. Longstanding market presence and centralised stock control help reduce procurement complexity and support uninterrupted laboratory operation. For technical advice on the Euromex bScope BS.7140 or to confirm suitability for specific microscopes, contact Metav Werkzeuge for expert guidance and dependable supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: BS.7140 SKU: BS.7140 Brand: Euromex Model series: bScope Product type: Microscope objective Facts Magnification: 40× Working distance: 0.64 mm Numerical aperture: 0.65 Special features EPL objective designation per product documentation Referenced in Education and Life Science PDFs as a source FAQ What magnification does this objective provide? The objective offers 40× magnification; the Euromex bScope BS.7140 is therefore suited to tasks that require higher detail on prepared slides. What is the numerical aperture and why does it matter? The numerical aperture is 0.65; a higher numerical aperture increases light collection and resolution, which improves the visibility of fine specimen details under brightfield imaging. How close can the objective focus to the sample? The working distance is 0.64 mm, which enables close focusing on thin specimens and prepared slides while requiring careful sample clearance and stage adjustment. Is this objective suitable for educational laboratories? Yes. The objective is documented in education‑focused product material and is appropriate for teaching and demonstration where high‑magnification resolution is required. What identifiers should be used when ordering or referencing the part? Use the article number/SKU BS.7140 and reference the Euromex bScope series when specifying the objective. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm 40x Microscope Objective 0.65 NA, 0.66 mm Working Distance - Euromex
The combination of 40x magnification, a numerical aperture of 0.65 and a 0.66 mm working distance delivers high-resolution imaging suitable for routine laboratory and educational microscopy; order the optical component directly via Metav Werkzeuge or request technical advice from the Metav consultancy team. bScope BS.8440 — Euromex 40x microscope objective, NA 0.65 The bScope BS.8440 is a 40x microscope objective designed for high-contrast, high-resolution observation in educational and life-science microscopy with a short working distance of 0.66 mm. High numerical aperture 0.65 Very short working distance 0.66 mm Optimised for education and life science Part of the Euromex bScope series Enhanced resolution through a high numerical aperture A numerical aperture (NA) of 0.65 increases the lens’s light-gathering ability, which translates into sharper detail and improved contrast at high magnification. For routine laboratory tasks where distinguishing fine structural features is essential, the higher NA reduces diffraction limits and supports clearer imaging on transmitted-light setups. This optical characteristic benefits both microscopic documentation and careful visual assessment without demanding complex illumination upgrades. Precise focusing enabled by the short working distance The 0.66 mm working distance supports fine sample focus at 40x magnification, allowing close approach to thin specimens and coverslips common in education and life-science preparations. The compact clearance minimises parallax and helps maintain a stable focal plane during careful manipulations. For applications that require detailed observation rather than large sample clearance, this working distance provides a direct technical advantage in achieving crisp images of cellular and microstructural detail. Consistent 40x performance for routine microscopy tasks A stable 40x magnification setting offers predictable enlargement for documentation, teaching exercises and comparative observations. The optical construction delivers repeatable image scale for measurements and classroom demonstrations, helping technicians and instructors maintain continuity across sessions. The objective’s specification supports integration into standard microscope workflows where reliable mid-range magnification is required without frequent objective changes. Designed for seamless integration in the bScope range As part of the bScope series, this objective is specified as an S40x/0.65 IOS PLi type in the manufacturer documentation, indicating its intended role within Euromex’s optical lineup. The design focus is on dependable imaging quality and compatibility with common laboratory practices, which simplifies equipment selection and bench calibration. Documentation references list the key parameters, enabling straightforward comparison with alternative objectives when selecting optics for specific tasks. For purchasing guidance or detailed technical clarification about the Euromex bScope BS.8440, contact Metav Werkzeuge GmbH in Emmerich for expert consultation and reliable supply. Technical Data Article number: BS.8440 Manufacturer item number: BS.8440 SKU: BS.8440 Product type: Microscope objective Brand: Euromex Model series: bScope Designation: bScope BS.8440 microscope objective Description: 40x magnification; working distance 0.66 mm; numerical aperture 0.65 UID: BS.8440 Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.66 mm Special features S40x/0.65 IOS PLi objective (manufacturer specification) Source: Education PDF-S. 21; Life Science PDF-S. 9,39 Category: For microscopes — microscopy accessories, objectives FAQ What magnification does this objective provide? The objective delivers 40x magnification as specified for the Euromex bScope BS.8440 and is suitable for mid-range microscopic observation. What is the numerical aperture and why does it matter? The numerical aperture of 0.65 for the bScope BS.8440 determines light-gathering capacity and resolution; a higher NA improves detail and contrast at high magnification. How close can the lens be to the specimen? The working distance is 0.66 mm, which allows close focusing for thin specimens and coverslips typically used in education and life-science microscopy. Is the objective part of a specific series? Yes, the lens belongs to the Euromex bScope series and is listed as an S40x/0.65 IOS PLi type in the product documentation. Where do the technical specifications originate? Key parameters for the bScope BS.8440, including 40x, NA 0.65 and WD 0.66 mm, are cited in the manufacturer PDFs (Education and Life Science references noted in the technical section). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm 40x Microscope Objective 0.65 NA, 0.68 mm Working Distance - Euromex
Precision imaging at 40x magnification combined with a 0.65 numerical aperture and a short 0.68 mm working distance delivers sharp, high‑contrast detail for life‑science and educational samples. Order the objective directly via Metav Werkzeuge or ask our consultants if needed. Euromex BioBlue.Lab BB.7240 microscope objective — 40x, NA 0.65 BioBlue.Lab BB.7240 is a 40x microscope objective engineered for high‑resolution observation in life‑science and education settings, offering a compact working distance for close‑focus imaging. 40x magnification for detailed observation Numerical aperture 0.65 for high resolution 0.68 mm working distance for close focusing Exceptional resolution for routine and advanced imaging The combination of 40x magnification and a 0.65 numerical aperture provides a noticeable improvement in resolving fine specimen detail compared with lower‑NA objectives. In practical terms, the higher aperture increases light collection and contrast, making subcellular structures more distinguishable under transmitted light. This makes the lens particularly suitable for biological staining techniques and brightfield microscopy where image clarity and contrast are decisive for analysis. The optical specification is documented as S40x/0.65 PLi in the manufacturer literature. Optimised for close‑range sample work and precise focusing A working distance of 0.68 mm indicates that the front lens element sits close to the specimen plane, enabling compact optical paths and efficient use of light at higher magnifications. This short distance supports detailed observation of thin preparations and coverslip‑mounted samples, but requires careful stage and condenser adjustment to avoid contact with the specimen. The objective is designed to integrate into existing optical systems where space and numerical aperture are limiting factors, offering a balance between magnification and signal quality for routine laboratory workflows. Practical compatibility and application notes Supplied specifications identify the unit as a dedicated microscope objective within the BioBlue.Lab series; it is referenced in the Education and Life Science PDFs as suitable for educational and research use. As a precision optical component, alignment, tube length and turret fitting are determining factors for compatibility with a given microscope stand. The BB.7240 is intended for users seeking improved detail at medium‑high magnification and benefits applications in teaching laboratories and basic research where contrast and resolution are priorities. For specimen types, the optical properties favour standard biological preparations rather than thick or highly three‑dimensional specimens. For procurement and compatibility advice on the Euromex BioBlue.Lab BB.7240, contact Metav Werkzeuge — consultants in Emmerich can advise on integration into existing microscope systems and order processing. Technical data SKU: BB.7240 Brand: Euromex Model series: BioBlue.Lab Product type: Microscope objective Facts Magnification: 40x Numerical aperture: 0.65 Working distance: 0.68 mm Special features S40x/0.65 PLi objective Source: Education PDF; Life Science PDF Category: For microscopes — Objectives FAQ What magnification and resolving power does this objective provide? The Euromex BioBlue.Lab BB.7240 delivers 40x magnification with a 0.65 numerical aperture, offering enhanced resolution and contrast for routine biological observation. Is the short working distance suitable for coverslip preparations? Yes, the 0.68 mm working distance is well suited to coverslip‑mounted specimens and thin sections, but careful stage adjustment is recommended to maintain safe clearance. Which applications benefit most from this objective? This objective is aimed at life‑science and educational applications where improved detail at medium‑high magnification is required; it performs well for stained samples and brightfield imaging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com