Aluminium Transport Case Microscope Carrying Case MicroBlue MB.9900 - Euromex
Take advantage of a robust aluminium transport case that protects delicate optics, combined with clear compatibility for the MicroBlue series and straightforward identification via SKU MB.9900. Order the MicroBlue MB.9900 directly through Metav Werkzeuge or consult our specialists for tailored selection advice. MicroBlue MB.9900 — Aluminium microscope transport case by Euromex The MicroBlue MB.9900 is a durable microscope transport case designed to safeguard laboratory and field microscopes during storage and transit. Aluminium transport case Secure storage for microscopes Compatible with MicroBlue series Robust protection in transit Robust protection designed for frequent transit The aluminium shell of this transport case provides a solid barrier against everyday handling and transport stresses, delivering reliable protection for sensitive optical equipment. Constructed for longevity, the hard outer casing reduces the risk of mechanical impact affecting instrument alignment, which preserves precision and reduces downtime. For laboratories and training centres that move instruments between locations, the case offers a durable housing that supports operational continuity and fewer interruptions to workflows. Practical compatibility that supports workshop efficiency Engineered with the MicroBlue range in mind, the case simplifies equipment logistics by keeping the instrument clearly identifiable and grouped with related accessories. Clear labelling via the SKU MB.9900 aids inventory management and reduces searching time in busy environments. The case’s form factor supports safe transport between classroom, site and service locations, helping teams maintain readiness and schedule adherence without complex handling procedures. Trust and clarity for educational and professional environments Offered by a recognised optics supplier, the transport case complements a broader approach to dependable workshop provisioning. The product supports institutional needs for repeatable, traceable handling of microscopes and aligns with procurement priorities that value durability and simple asset management. Should further specification or confirmation be required, technical enquiries are welcome to ensure the case meets the particular demands of educational, clinical or industrial routines. Contact Metav Werkzeuge for fast supply of the MicroBlue MB.9900 and expert advice on fitment and procurement — email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance. Technical data Article number: MB.9900 SKU: MB.9900 Brand: Euromex Product type: Microscope transport case Model series: MicroBlue Numbers / Core technical data No measurable data provided Designs / Special features Aluminium transport case Intended for microscope transport and storage Category path: Microscopy accessories → Transport cases → Transport cases FAQ Is the case suitable for MicroBlue series microscopes? The MicroBlue MB.9900 is specified for transport and storage of instruments from the MicroBlue series and is identified by SKU MB.9900. Does the specification list internal padding or inserts? Internal fittings are not detailed in the provided specification for the MB.9900; please request further information if a particular internal configuration is required. Can the MB.9900 be used for fieldwork? The MB.9900 is described as a transport case intended to protect microscopes during transit; suitability for specific field conditions should be verified against operational requirements. Is the case manufactured from corrosion-resistant material? The case is described as an aluminium transport case; specific surface treatments or coatings are not listed in the available data. Where can the MB.9900 be sourced for institutional procurement? The MicroBlue MB.9900 is available through Metav Werkzeuge and its distribution channels; please consult product listing or contact the supplier for procurement details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Analysator for Reflected Light Illumination for iScope Polarisation Models, IS.9602-R - Euromex
Benefit from improved surface contrast and controlled polarisation in reflected‑light inspections, combined with a precise optical fit for iScope polarisation systems. Order the analyser directly via Metav Werkzeuge or consult our advisors for specification support. Euromex IS.9602-R Analyser for Reflected‑Light Illumination — Polarisation Filter for iScope Models The IS.9602-R analyser provides polarisation control for reflected‑light microscopy, designed for use with iScope polarisation models to enhance contrast on opaque surfaces. Polarisation for reflected‑light contrast Compatible with iScope polarisation models Precise optical fit for reliable alignment Improved surface contrast for reflected‑light inspection This analyser brings controlled polarisation to reflected‑light setups, reducing surface glare and enhancing the visibility of microstructural features on opaque samples. In practice, the component acts as an optical element that modifies the polarisation state of the illumination, which can significantly increase the contrast between different phases or coatings on metals, ceramics and layered materials. The result is clearer visual differentiation of surface defects, grain boundaries and finish variations without altering the sample. Seamless integration with iScope polarisation systems Designed specifically for the iScope polarisation range, the analyser offers assured compatibility and straightforward mechanical integration. The unit aligns with the existing illumination train and optical mounts of compatible microscopes, simplifying installation and preserving the instrument’s optical path. This compatibility supports fast setup and stable alignment, which is especially valuable in production environments where consistent precision and repeatability are required for routine inspections. Reliable inspection outcomes for industrial workflows In quality control and materials analysis, reproducible results are essential. The analyser stabilises polarisation conditions in reflected‑light examinations, helping to standardise observations across multiple sessions and operators. This stability supports faster decision‑making in applications such as metallography, electronics inspection and surface‑finish assessment, where enhanced contrast shortens evaluation time and reduces the risk of overlooked defects. The device therefore contributes to more efficient throughput and consistent quality documentation. Specification guidance and technical follow‑up Technical data and detailed fitment information are available on request to ensure the analyser meets specific application needs. For customers requiring integration advice or additional technical parameters, Metav Werkzeuge provides specification support and access to product documentation. Detailed queries about optical alignment, polarisation workflow implementation or suitable sample types can be addressed by the technical team to ensure the chosen configuration matches the inspection task and equipment constraints. Contact Metav Werkzeuge for specification support and order processing of the Euromex IS.9602-R, with expert advice and delivery coordinated from Emmerich. Technical Data Article number: IS.9602-R SKU: IS.9602-R Manufacturer: Euromex Product type: Microscope filter Category: Polarisation Facts Compatibility: iScope polarisation models Special features Analyser for reflected‑light illumination Designed for polarisation contrast For use in microscopy polarisation setups FAQ What does the analyser do in reflected‑light microscopy? The analyser modifies the polarisation of reflected illumination to reduce glare and enhance contrast; the Euromex analyser supports clearer observation of surface structures. Is the analyser compatible with all iScope polarisation models? Compatibility is specified for iScope polarisation models; the analyser is intended to integrate with those systems to preserve optical alignment and function. Which sample types benefit most from this analyser? Opaque materials such as metals, ceramics and coated parts benefit from polarisation control in reflected‑light inspection, improving visibility of microstructural and surface features. Can the analyser be retrofitted into an existing inspection setup? The analyser is designed for integration into compatible polarisation illumination trains; technical fitment guidance is available to verify suitability for existing configurations. Does the analyser change the microscope’s magnification or image scale? The unit modifies the illumination polarisation only and does not affect the objective magnification or image scale when installed correctly. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
AxioS-X Observer AX.9112 Condenser Darkfield Oil, - Euromex
Take advantage of a darkfield oil‑immersion solution that enhances contrast for unstained samples while remaining compatible with the Achios‑X Observer series; order directly via Metav Werkzeuge or consult our specialists for further technical clarification. Achios‑X Observer AX.9112 Condenser by Euromex — Darkfield oil immersion Achios‑X Observer AX.9112 is a darkfield oil‑immersion condenser designed to increase contrast for delicate and unstained specimens in life‑science and materials microscopy. Darkfield oil‑immersion condenser Designed for Achios‑X Observer series Optimised for high‑contrast microscopy Sharper contrast for unstained and delicate samples The darkfield principle directs oblique illumination so that only scattered light from the specimen reaches the objective, producing a bright specimen against a dark background. In combination with oil immersion, this effect is intensified, which improves fine‑detail visibility for transparent or barely stained structures. For laboratories that analyse cells, fibres or particulate matter, the result is a reliable enhancement in contrast without additional staining steps, reducing preparation time while retaining specimen integrity. Engineered for integration within observation benches Built as part of the Achios‑X Observer family, Achios‑X Observer AX.9112 is intended for straightforward integration into compatible microscope stands. The condenser's design supports stable alignment and repeatable positioning, which contributes to reproducible imaging results across routine workflows. Specimen evaluation benefits from the stable optical path and the consistent illumination geometry, helping to reduce re‑calibration efforts between sessions. Practical handling and maintenance suited to busy laboratories Oil immersion requires careful handling and cleaning to preserve optical performance; the condenser is therefore compatible with standard laboratory cleaning procedures and common immersion oils. Routine maintenance keeps the optical surfaces clear and ensures long‑term performance, while the modular nature of the unit simplifies replacement or servicing. For supplementary technical data or specific compatibility checks with existing microscope configurations, Metav Werkzeuge provides detailed support and documentation; further technical queries can be directed to info@metav-werkzeuge.com or via telephone at +49 2822 7131930. Discuss integration and ordering options for Euromex condensers with Metav Werkzeuge; expert advice and procurement support are available from our Emmerich team. Technical data Article number: AX.9112 SKU: AX.9112 Manufacturer: Euromex Product type: Condenser Facts Application: Darkfield (oil immersion) Model series: Achios‑X Observer Category path: Mikroskopie‑Zubehör → Sonstiges → Kondensoren Special features Darkfield condenser (oil) Intended for life‑science and materials observation Compatible with Achios‑X Observer series FAQ What is a darkfield oil‑immersion condenser used for? A darkfield oil‑immersion condenser produces high contrast for transparent or unstained specimens; the Achios‑X Observer AX.9112 intensifies scattered light detection for improved visibility of fine structures. Can the Achios‑X Observer AX.9112 be used with standard immersion oils? Yes, the condenser is designed for oil‑immersion use and is compatible with standard immersion oils; adherence to recommended cleaning routines preserves optical performance. Which microscope series is this condenser compatible with? The condenser is designed for integration with the Achios‑X Observer series and aligns with the mechanical and optical interfaces typical for that platform. Does the unit require special maintenance after each use? Routine cleaning of immersion oil from optical surfaces is recommended after use; following standard laboratory cleaning procedures will maintain the condenser's performance and longevity. Is the Achios‑X Observer AX.9112 suitable for materials as well as biological samples? Yes, the darkfield oil approach is useful for certain materials applications where enhanced scattering contrast reveals surface features or particulates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
C-Mount 1x Magnification Camera Adapter, C-Mount Standard - Euromex
Take advantage of precise, scale-preserving imaging and straightforward camera integration to streamline documentation and inspection tasks; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. Euromex DX.9810 C‑mount adapter — 1× magnification for C‑mount cameras The Euromex DX.9810 is a C‑mount adapter providing 1× magnification for connecting C‑mount cameras to microscope imaging paths, designed to preserve scale and simplify camera attachment in laboratory and inspection setups. C‑mount interface for standard camera mounts 1× magnification for true-to-scale imaging Optimised for microscope camera integration Preserves image scale and sensor coverage Accurate imaging that preserves measurement scale The adapter delivers 1× magnification, which means the camera sensor sees the optical image without additional enlargement or reduction. For tasks where measurements or image comparison across systems are required, this true-to-scale imaging avoids unintended changes in apparent size and simplifies calibration. In practice, maintaining a one-to-one relationship between the optical output and the sensor reduces the need for software scaling and supports consistent documentation across microscopes and cameras. Seamless camera integration with standard mounting Featuring a conventional C‑mount interface, the accessory attaches directly to widely used microscope camera housings and industrial cameras. The standardised mechanical fit ensures reliable alignment of the optical path and maintains the designed distance between microscope optics and the camera sensor, supporting stable focus and even field illumination. The consistent mounting interface helps reduce setup time during camera swaps and supports quick integration into existing imaging workflows. Practical benefits for laboratory and inspection environments Using a purpose-built camera adapter simplifies routine imaging and inspection tasks by preserving the optical characteristics of the microscope system. The adapter supports repeatable image capture for quality control, documentation, and comparative analysis, which is particularly useful in education, materials testing and routine laboratory inspections. Because the accessory focuses on mechanical compatibility and scale fidelity, it complements camera selection and optical configuration without altering the microscope's native imaging properties. Straightforward selection and setup guidance Selecting an adapter with a matched C‑mount and 1× magnification removes ambiguity when pairing cameras and microscopes: there is no hidden magnification factor to account for when calculating field of view or pixel size. For users uncertain about compatibility, check the camera's mount and sensor size; the adapter is intended to interface with standard C‑mount cameras and to preserve the optical output as delivered by the microscope optics. For bespoke setups or unusual camera formats, consult the technical team for confirmation. For reliable, scale-preserving imaging and expert purchasing guidance for the Euromex DX.9810, contact Metav Werkzeuge—our advisors at info@metav-werkzeuge.com or +49 2822 7131930 will assist with compatibility and order details. Technical data Manufacturer article number: DX.9810 SKU: DX.9810 Product type: Microscope camera adapter Facts Magnification: 1× Interface: C‑mount Application: Camera attachment to microscope imaging path Special features Preserves optical scaling between microscope and camera Intended for use with C‑mount cameras Manufacturer: Euromex FAQ Is this adapter compatible with all C‑mount cameras? The adapter is designed for standard C‑mount cameras and therefore suits most camera housings with a C‑mount thread; the Euromex DX.9810 preserves the optical output when mechanically attached. How does 1× magnification affect measurement accuracy? With 1× magnification, the image on the camera sensor remains true to the microscope output, simplifying field-of-view calculations and helping to maintain consistent measurement scaling across image captures with the DX.9810. Will the adapter change the microscope's focus or optical properties? The adapter provides mechanical coupling without introducing additional magnifying optics, so it does not alter the microscope's native magnification; appropriate focusing may still be required after attachment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Condenser iScope IS.9105 Swing-Out 0.9/1.25 N.A., Education/Life Science - Euromex
Take advantage of the combination of reliable swing-out geometry and a dual numerical aperture (0.9 / 1.25 N.A.) for consistent brightfield illumination; order the Euromex condenser directly via Metav Werkzeuge or consult their specialists for compatibility advice. Condenser iScope IS.9105 — Swing-out 0.9/1.25 N.A. condenser by Euromex The Condenser iScope IS.9105 is a swing-out condenser designed to provide flexible illumination control for routine microscopy in educational and life-science settings. Swing-out 0.9/1.25 N.A. condenser Compatible with iScope series optics Article/SKU IS.9105 Consistent illumination for routine laboratory workflows The swing-out geometry with a dual 0.9 / 1.25 numerical aperture is engineered to offer dependable light delivery across common objective ranges, enabling stable brightfield performance during sample observation. The architecture reduces the need for frequent realignment, which helps maintain throughput in classrooms and teaching laboratories where many users share the same instrument. By specifying a condenser with these aperture values, the optical train supports both medium- and high-magnification objectives, ensuring that contrast and resolution are preserved when switching between lenses. This focus on optical consistency translates into fewer interruptions and more time spent on measurement or analysis. Simple integration and clear compatibility information The condenser is intended as an accessory for the iScope model family and is specified as IS.9105 for straightforward identification during procurement. The swing-out design facilitates quick engagement and retraction from the optical axis without complex tools, so bench-side adjustments are efficient and repeatable. For purchasers comparing options, the clear numerical-aperture specification provides an objective basis for selection and avoids guesswork: the task of matching condenser NA to objective requirements is simplified, which speeds up commissioning and reduces the need for specialist setup. If additional technical clarification is needed, Metav Werkzeuge can supply further documentation or compatibility checks. Durable choice with practical benefits for shared lab environments Built for everyday use in teaching and light research, this condenser emphasises operational reliability and ease of handling. The swing-out mechanism minimises wear on mounting components by reducing obstructions during objective changes, and the specified aperture values support established microscopy techniques without requiring alternative accessories. For facilities aiming to standardise equipment across multiple benches, the IS.9105 offers a compact way to harmonise illumination characteristics. The overall result is a pragmatic balance of performance, maintainability and user-friendly operation that supports training objectives and routine sample inspection. Contact Metav Werkzeuge today for precise ordering information and compatibility assistance for the Euromex Condenser iScope IS.9105 — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply from Emmerich. Technical data Article number: IS.9105 SKU: IS.9105 Brand: Euromex Data Numerical aperture: 0.9 / 1.25 Special features Swing-out condenser design iScope series compatibility Referenced in Education PDF and Life Science PDF sources FAQ What numerical apertures does this condenser provide? The condenser delivers 0.9 and 1.25 N.A. settings as stated for the Euromex Condenser iScope IS.9105, enabling use with medium to high power objectives. Is the condenser suitable for teaching laboratories? Yes, the swing-out geometry and robust design of the iScope IS.9105 make it appropriate for shared teaching environments where ease of use and repeatability are important. How does the swing-out feature benefit daily operation? The swing-out mechanism allows rapid retraction from the optical path, simplifying objective changes and reducing setup time for consecutive users of the microscope. Which microscope family is this condenser intended for? The accessory is specified for the iScope model series and is identified by article number IS.9105 for clear procurement and compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Delphi-X Observer DX.9110 Darkfield Condenser, Dry Darkfield - Euromex
Take advantage of the dry darkfield capability and series‑specific design to enhance contrast for unstained samples while keeping workflow integration straightforward; order the condenser directly via Metav Werkzeuge or consult our specialists for application advice. Delphi‑X Observer DX.9110 – Dry darkfield condenser by Euromex A Delphi‑X Observer DX.9110 condenser engineered to provide dry darkfield contrast for microscopy applications, optimised for the Delphi‑X Observer model series Dry darkfield illumination for high-contrast imaging Designed for Delphi‑X Observer series microscopes Model DX.9110 for consistent optical performance Simple integration into existing condenser mounts Improved contrast for unstained and delicate samples The dry darkfield design transforms incidents of stray light into useful contrast, allowing faint structures to appear bright against a dark background. This optical principle is particularly valuable for observing fine details in unstained biological specimens or transparent particles, as it relies on scattered light rather than absorption. The result is high-contrast imaging with minimal sample preparation, making microscopic inspection faster and reducing the need for dyes that can alter or damage delicate samples. Seamless fit within the Delphi‑X Observer series for reliable imaging Built for the Delphi‑X Observer line, the DX.9110 is specified to match the mechanical and optical interfaces of that series, which simplifies installation and alignment. The model DX.9110 ensures consistent illumination geometry and predictable results across routine inspections, supporting reproducible workflows in laboratory or teaching environments. This series‑matched approach reduces setup time and helps maintain optical clarity across sessions, so operators can focus on analysis rather than repeated adjustments. Practical benefits that support efficient microscopy workflows By delivering enhanced contrast without staining and by integrating smoothly into existing instrumentation, this condenser contributes to measurable time savings and improved observational confidence. The optical component’s purpose is to reveal scatter‑dependent detail, which often translates into quicker identification of particles, cellular features, or contaminants. For teams seeking dependable performance and an uncomplicated upgrade path, the condenser provides a targeted enhancement to standard brightfield setups while keeping routine maintenance and handling straightforward. Assistance with selection and technical questions is available from Metav Werkzeuge if clarification is needed. Contact Metav Werkzeuge for tailored advice on integrating the Delphi‑X Observer DX.9110 into existing setups or to request delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DX.9110 SKU: DX.9110 Model series: Delphi‑X Observer Product type: Condenser Facts No numerical specifications provided Special features Dry darkfield condenser Designed for Delphi‑X Observer series microscopes Label: Kondensor Delphi‑X Observer DX.9110 Source: Life Science PDF, p. 26 FAQ What is the purpose of a darkfield condenser? A darkfield condenser creates illumination that highlights scattered light from specimens; the Delphi‑X Observer DX.9110 uses this principle to produce enhanced contrast for features that are otherwise difficult to see in brightfield. Is the DX.9110 compatible with other microscope series? The DX.9110 is designed specifically for the Delphi‑X Observer model series; compatibility with other microscopes depends on mechanical and optical interface conformity and should be verified before installation. Can the condenser be used without staining samples? Yes, the dry darkfield design of the DX.9110 is intended to improve visibility of unstained or translucent specimens by emphasising scattered light rather than relying on dyes. How does this condenser affect routine workflow? Integration of the DX.9110 typically reduces sample preparation time and speeds up visual inspection by enabling clear detection of fine structures without additional contrast agents. Where can more technical details be obtained? Further specifications and application guidance can be requested from Metav Werkzeuge; reference the Delphi‑X Observer DX.9110 when enquiring for prompt assistance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Delphi-X Observer DX.9140 Phase Contrast Rotating Disc Condenser, Phase Annuli - Euromex
Take advantage of a rotating disc design with integrated phase annuli for consistent contrast enhancement and streamlined microscopy workflows; order the unit directly via Metav Werkzeuge or consult our specialists for technical guidance. Delphi‑X Observer DX.9140 Condenser — Rotating disc phase contrast condenser by Euromex The Delphi‑X Observer DX.9140 is a phase contrast condenser engineered for reliable contrast enhancement in life science microscopy, designed for use with the Delphi‑X Observer series and laboratory imaging applications Rotating disc phase contrast system Includes phase annuli for precise contrast Compatible with Delphi‑X Observer series Clearer contrast for transparent specimens The rotating disc mechanism provides stable phase contrast by aligning the phase annuli to the optical path, improving visibility of unstained, transparent samples. This optical approach converts subtle phase shifts into intensity differences, which makes cellular structures and fine details discernible without additional staining. The design reduces manual adjustment steps and helps maintain consistent imaging results across routine examinations, supporting reproducible observations in research and teaching environments. Designed to integrate with existing microscope systems Built for seamless compatibility with the Delphi‑X Observer family, the condenser installs into the optical column to complement standard illumination setups. The unit is supplied without objectives, allowing laboratories to combine it with chosen objective lenses as required for each application. Because the module focuses on contrast enhancement rather than magnification, it complements a wide range of objective choices, enabling flexible workflow configurations in multiuser or shared facilities. Practical optical configuration and laboratory benefits The condenser's optical configuration, centred on the phase annuli, supports precise alignment and reduces artefacts commonly encountered in phase contrast imaging. The robust mechanical design is suitable for frequent use in life science workflows and routine diagnostics, while the straightforward optical concept simplifies maintenance and alignment tasks. As part of a considered instrument supply chain, the unit benefits from Metav’s quality assurance and logistics, ensuring dependable delivery and availability for continuous laboratory operations. For technical advice on integrating the Delphi‑X Observer DX.9140 into existing microscopes or to arrange supply via Metav Werkzeuge, contact our Emmerich team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s specialists can advise on compatibility and ordering from stock Technical data Article number: DX.9140 SKU: DX.9140 Product type: Condenser Model series: Delphi‑X Observer Brand: Euromex Facts Rotating disc phase contrast condenser Phase annuli included Supplied without objectives Intended for life science microscopy Special features Phase contrast for unstained samples Designed for Delphi‑X Observer series integration Optical module for contrast enhancement Referenced in Life Science PDF (rotating disc phase contrast condenser with phase annuli; without objectives) FAQ What is the primary function of this condenser? The Delphi‑X Observer DX.9140 condenser provides phase contrast to render transparent specimens visible by converting phase shifts into intensity differences for clearer imaging. Is this condenser supplied with objectives? No, the condenser is supplied without objectives; the Delphi‑X Observer DX.9140 complements existing objective lenses and allows selection according to application needs. Can the condenser be used on microscopes outside the Delphi‑X Observer series? The condenser is optimised for the Delphi‑X Observer platform; adaptation to other microscope models may require a suitable mount or adapter and verification of mechanical compatibility. Which applications benefit most from this condenser? Phase contrast microscopy of living cells, thin tissue sections and other unstained, transparent specimens benefits most from the contrast enhancement delivered by this condenser. Are the phase annuli adjustable or fixed? The condenser design incorporates phase annuli aligned with the optical path; alignment and positioning are part of the condenser’s optical configuration to ensure consistent phase contrast performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Delphi-X Observer Phase Contrast Set 10x/20x/S40/S100x Oil, Rotating Disc Condenser - Euromex
Take advantage of precise, high-contrast imaging and straightforward alignment in one kit: the set combines a rotating-disc condenser with phase annuli and an alignment telescope plus a full objective complement for detailed observation. Order the Delphi‑X Observer DX.9126 directly via Metav Werkzeuge or ask our consultants if needed. Delphi‑X Observer DX.9126 – Phase contrast set with complete objective complement (Euromex) The Delphi‑X Observer DX.9126 is a phase contrast set designed for transmitted‑light microscopes to enhance contrast of transparent specimens without staining. Phase contrast for transparent specimens Rotating disc condenser with phase annuli Alignment telescope for fast centring Includes objective set up to high magnification Enhanced visualisation for unstained specimens The Delphi‑X Observer kit enables reliable observation of unstained specimens by converting optical phase differences into visible intensity contrast. This phase contrast method reveals subcellular detail in living cultures and thin transparent materials without chemical treatment, which preserves sample integrity and shortens preparation time. The inclusion of a dedicated objective complement and matched annuli ensures that image contrast and background uniformity are optimised, supporting repeatable image capture and more efficient workflow in routine laboratory tasks. Precision alignment reduces setup time and improves repeatability Alignment is simplified by the alignment telescope supplied with the condenser, which allows quick matching of phase annuli to the objective pupils. The rotating disc condenser facilitates selection and switching of contrast rings while maintaining optical centration, so microscopic setups that previously required prolonged fine tuning now reach optimal configuration faster. The result is reduced downtime between samples and improved reproducibility of observations, a clear operational benefit for busy life‑science and quality control environments. High‑resolution detail with oil immersion capability For high‑resolution requirements the set includes an S100x oil objective, designed to deliver fine structural resolution when used with immersion oil. Oil immersion increases numerical aperture and thus spatial resolution for small features, making the system suitable where detailed surface or intracellular structure must be resolved. Complementary objectives in the kit cover lower magnification ranges for survey and intermediate observation, providing a flexible optical base without the need for additional purchases. Compatibility and recommended applications The components are intended for use with transmitted‑light microscopes, making the kit suitable for cultured cell observation, microbiology preparations, thin biological sections and certain material inspections where contrast of low‑absorbance samples is required. The combination of matched annuli, objectives and a rotating condenser supports both routine laboratory work and educational settings where consistent contrast and ease of alignment are priorities. The kit offers a practical way to upgrade existing microscopes for phase contrast imaging without complex retrofitting. Contact Metav Werkzeuge for tailored advice on integrating the Euromex phase contrast set DX.9126 into existing microscopy workflows and to discuss compatibility with specific microscope models Technical data Manufacturer: Euromex Article number: DX.9126 Model series: Delphi‑X Observer Product type: Phase contrast set SKU: DX.9126 Facts Objectives: 10×, 20×, S40×, 100× oil Supplied accessories: phase annuli, alignment telescope Condenser type: rotating disc phase contrast condenser Special features Phase contrast for transmitted light Rotating disc condenser with phase annuli Alignment telescope for condenser centration Objective set includes oil immersion option FAQ What types of samples are best viewed with this phase contrast set? The Delphi‑X Observer DX.9126 is optimised for transparent and low‑contrast samples, such as living cells, thin tissue slices and certain microstructures, where staining is undesirable. Does the kit include an oil immersion objective for high magnification work? Yes, the DX.9126 set contains an S100x oil objective, enabling high‑resolution imaging with oil immersion when detailed structural information is required. How does the alignment telescope support setup? The supplied alignment telescope simplifies centring of phase annuli with the objective pupils, allowing faster and more accurate condenser alignment for consistent phase contrast performance. Can the rotating disc condenser be used for quick switching between contrast settings? The rotating disc condenser in the kit permits rapid selection of matched phase annuli, streamlining transitions between objective magnifications and contrast modes. Is this phase contrast set suitable for education and routine lab use? The Delphi‑X Observer DX.9126 provides robust contrast enhancement and straightforward alignment, making it well suited for both educational settings and routine laboratory workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Delphi-X Observer Polarisation Kit DX.9662, Special Polarisation Accessories - Euromex
Data error: the field "axite_enrichment" contains "Special polarization kit for gout", which appears incorrect or inconsistent with the product description, as the product in question does not seem to align with the specified field value, suggesting a potential mismatch or misclassification that may require further review or verification to ensure the accuracy and relevance of the data being presented, particularly if this information is intended for use in a professional or medical context where precise and reliable details are critical for decision-making and overall clarity in communication.
DZ.5040 Darkfield Attachment For DZ.5040, For Darkfield Contrast - Euromex
Take advantage of enhanced darkfield contrast and direct compatibility with the DZ.5040 optical path for reliable visualisation of translucent specimens; order via Metav Werkzeuge or consult our technical advisers for application guidance. Darkfield attachment DZ.9040 — Darkfield unit for DZ.5040 by Euromex The DZ.9040 is a darkfield attachment designed to deliver darkfield contrast for the DZ.5040 microscope, enabling improved detection of edges, inclusions and minute particles in transparent samples. Compatible with DZ.5040 microscope Enables darkfield contrast imaging Manufactured by Euromex SKU DZ.9040 for easy identification Improved contrast for translucent specimens The darkfield principle redirects illumination so that only scattered light from the sample reaches the objective, making features that are otherwise invisible stand out against a dark background. This approach significantly increases contrast for transparent samples and fine structures, making faint edges, fibres and particulates visible without staining. For routine inspection and visual quality control, the result is a clearer image interpretation and faster decision making, particularly where identification of small defects or contaminants is essential. Designed integration with existing optical setups This attachment has been produced for optical compatibility with the DZ.5040 and is intended to complement standard transmitted‑light arrangements. As a dedicated darkfield accessory from Euromex, the module supports workflows that require alternating contrast methods, allowing teams to switch between brightfield and darkfield techniques with minimal reconfiguration. The integration reduces processing time during visual inspection rounds and helps maintain a consistent imaging chain in laboratories and production inspection stations. Typical uses and benefits in inspection environments The unit is particularly valuable in applications such as particle analysis, fibre inspection, inclusion detection in transparent substrates and the examination of thin films and suspensions. By emphasising scattered light, the attachment assists optical assessment where conventional illumination fails to reveal fine detail. For quality assurance and metallographic pre‑checks or for preparatory inspection in material research, the darkfield module enhances defect detection rates while preserving specimen integrity without chemical alteration. For precise darkfield imaging and to discuss how the Euromex DZ.9040 fits into existing microscope setups, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request expert advice Technical data Article number: DZ.9040 SKU: DZ.9040 Manufacturer: Euromex Product type: Dunkelfeld-Einrichtung Facts Gallery file size: 65446 Special features Compatible with DZ.5040 Label: Dunkelfeld Aufsatz für DZ.5040 DZ.9040 Image URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1e/a5/f1/6a/6af1a51ed8ecf2f60acae0e4/DZ.9040.jpg FAQ What is the primary function of this darkfield attachment? The Euromex DZ.9040 darkfield attachment produces darkfield illumination so that light scattered by the specimen is highlighted, improving visibility of edges, particles and fine structures that are hard to see under brightfield. Is the DZ.9040 compatible with the DZ.5040 microscope? Yes, the DZ.9040 is designed for use with the DZ.5040 and aligns with its transmitted‑light optical path to provide darkfield contrast. Which inspection tasks benefit most from this accessory? Applications such as particle detection, fibre inspection, inclusion analysis and evaluation of thin films or suspensions profit from the enhanced contrast delivered by the DZ.9040 darkfield module. Can the attachment be used on other microscope models? The accessory is specified for the DZ.5040; compatibility with other models is not detailed in the available data and should be verified against the optical configuration of the alternative instrument. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Eyecup For Eyepiece AE.5365, Replacement Eyecup - Euromex
The AE.5365 microscope eyecup combines improved viewing comfort with effective stray-light reduction, creating steadier observation sessions and reduced eye fatigue. Its simple fit for standard eyepieces and straightforward cleaning mean low maintenance in daily laboratory or classroom use. Order the AE.5365 microscope eyecup directly via Metav Werkzeuge or ask our consultants if needed. AE.5365 — Euromex microscope eyecup with comfortable fit and stray-light reduction AE.5365 is a compact eyecup designed to improve viewing comfort at the eyepiece and to reduce stray light for clearer, more consistent microscopy. Soft rubber for comfortable viewing Shields stray light for clearer images Simple fit for standard eyepieces Easy to clean and maintain Clearer observation through improved eye contact The eyecup creates a defined viewing aperture that helps to stabilise the eye position at the eyepiece, which can noticeably reduce visual fatigue during extended sessions. By limiting peripheral light intrusion, the accessory supports a higher perceived contrast in the field of view; this practical effect makes routine inspections and teaching demonstrations easier to evaluate. The design focuses on function rather than complexity, providing a direct benefit to workflows where repeated, accurate observation is required. Fast integration and low maintenance for workshop and lab use Fitting the eyecup is straightforward and compatible with common eyepiece diameters used across many microscopes; its uncomplicated attachment reduces setup time and avoids interruptions to productive work. Routine care is simple: a quick wipe with a mild, lint-free cloth restores the surface without specialist agents, supporting easy maintenance and long service intervals. The low-effort upkeep aligns with busy environments such as education labs and general workshop benches where tools must remain reliable and ready. Confidence and supply from a dedicated precision partner Selecting this eyecup supports efficiency and consistent results in everyday microscopy, backed by a supplier philosophy that emphasises accessible precision. Metav stands for the democratisation of accuracy, combining decades of expertise with a broad range of products so that workshops and trade professionals obtain trustworthy measurement solutions from a single source. With an established customer base and central logistics in Emmerich, supply reliability and pragmatic service support are part of the overall benefit package. For a compatibility check or to arrange delivery of the Euromex AE.5365 eyecup, contact Metav Werkzeuge GmbH in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifics and lead times Technical data Article number: AE.5365 SKU: AE.5365 Product type: Microscope eyecup Brand: Euromex Description: Eyecup for eyepiece (source: Education PDF, p.13) Key figures No numerical specifications provided Measurements and material not specified Special features Compatible with standard eyepieces Reduces stray light Improves viewing comfort Easy to clean FAQ What is the purpose of this eyecup? The AE.5365 microscope eyecup is intended to improve viewing comfort at the eyepiece and to help reduce stray light for clearer image perception. Which eyepieces does it fit? The AE.5365 is designed for standard eyepiece fittings; compatibility depends on eyepiece diameter, so matching to the specific microscope eyepiece is recommended. How should the eyecup be cleaned? Cleaning is carried out with a mild, lint-free cloth; avoid aggressive solvents to preserve surface condition and fit. Is the eyecup supplied with an eyepiece? The eyecup is an accessory sold separately; it is supplied as the eyecup unit and must be fitted to a compatible eyepiece. Can this accessory be used in educational environments? Yes, the compact design and easy maintenance make the eyecup suitable for classrooms and teaching laboratories where frequent handling occurs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Eyecup Pair For BioBlue.Lab Microscopes, Comfortable Fit - Euromex
Pair of eyecups for reliable ocular replacement; compatible with the BioBlue.Lab series and supplied as a direct Euromex accessory. Benefit from straightforward interchangeability and clear identification with SKU BB.6099 — order the item directly via Metav Werkzeuge or ask the consultants for details. Euromex BioBlue.Lab BB.6099 microscope eyecups — pair for microscope oculars The BioBlue.Lab BB.6099 is a pair of eyecups designed for microscope oculars, suitable for use in education and life-science laboratory environments and intended as a direct replacement accessory for the BioBlue.Lab series. Pair of eyecups for microscope oculars Designed for BioBlue.Lab series compatibility Euromex original replacement accessory Suitable for education and life-science use Consistent compatibility for routine laboratory use The supplied pair of eyecups is presented as a direct accessory for the BioBlue.Lab instrument family and is identified by SKU BB.6099; the entry is registered under the Euromex product line. This configuration supports straightforward replacement of worn ocular cushions and simplifies stock keeping by matching the original series designation. The listing indicates use cases in both educational and life-science contexts, making the item appropriate for teaching laboratories and routine bench work where standardised parts reduce downtime and maintain consistent instrument setup. Practical replacement to maintain microscope readiness As a replacement accessory, the eyecups enable quick restoration of the optical interface between user and ocular, ensuring the instrument retains its intended physical configuration. The component is catalogued as an original-equipment accessory from Euromex, which aids traceability within maintenance records and parts lists. Clear item identification via the BB.6099 article number helps with procurement and inventory control, supporting planned maintenance cycles and reducing the time required to source compatible ocular components from established suppliers. Ordering and procurement guidance for workshop and teaching environments The product is supplied as a pair and is referenced in education and life-science documentation, indicating suitability for group-use settings and shared equipment. For procurement, the catalogue entry provides the manufacturer designation and the model-series link to BioBlue.Lab, which facilitates supplier queries and compatibility checks. Technical specifications such as material and exact dimensions are not listed in the current data; where precise fitting or compatibility verification is required, supplementary technical information can be requested from the supplier or listed distributor. Contact Metav Werkzeuge for ordering, compatibility verification or procurement advice on the BioBlue.Lab BB.6099 eyecups; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance. Technical Data Article number: BB.6099 SKU: BB.6099 Manufacturer: Euromex Product type: Microscope eyecup Model series: BioBlue.Lab Core data No numerical specifications provided Special features Pair of eyecups Compatible with BioBlue.Lab series Intended application: Education, Life Science Category path: Microscopy accessories > Oculars > Eyecups FAQ Are the eyecups supplied as a set or individually? The BB.6099 is supplied as a pair of eyecups and is listed as a single replacement set for the BioBlue.Lab series. Will these eyecups fit other Euromex models? Compatibility is specified for the BioBlue.Lab series; fit on other Euromex models should be confirmed against the ocular dimensions and the BB.6099 designation. What is the manufacturer of this accessory? The eyecups are recorded under the Euromex product line with article number BB.6099 and are listed as an original replacement accessory. Where is this accessory referenced for use? The product appears in education and life-science documentation, indicating suitability for teaching laboratories and life-science workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Filterset GFP-LP EX460-500 DM505 EM510 Longpass Microscope Filter - Euromex
Take advantage of precise blue-range excitation and clean emission separation for reliable GFP imaging; the combination of EX460–500 excitation, the DM505 dichroic and EM510 longpass emission ensures improved signal-to-noise and consistent results in fluorescence setups — order via Metav Werkzeuge or consult our specialists for application advice. Filterset GFP-LP for blue-range excitation (EX460–500, DM505, EM510 Longpass) – Microscope filter by Euromex A Filterset GFP-LP (DZ.9061) designed for fluorescence microscopy, delivering targeted excitation in the blue spectral band and longpass emission filtering for GFP applications. Blue-range excitation EX460–500 Dichroic mirror DM505 cut-on EM510 longpass emission for GFP Reliable excitation tailored for GFP imaging The optical assembly is configured for blue-range excitation with a defined EX460–500 band, which matches the absorption peak of green fluorescent protein (GFP) and similar fluorophores. This spectral match increases the proportion of excited fluorophores while limiting off-target illumination, resulting in a stronger emission signal. By concentrating energy in the appropriate wavelength window, the filter assembly helps laboratories achieve consistent fluorescence contrast across repeated measurements, which supports reproducible imaging workflows for research or routine inspection. Cleaner emission for improved image contrast A well-defined dichroic element is central to fluorescence performance. The DM505 dichroic mirror provides a clear cut-off around 505 nm, reflecting excitation wavelengths and transmitting longer emission light to the detector. Coupled with the EM510 longpass specification, the combination reduces excitation bleed-through and background, delivering an improved signal-to-noise ratio for fluorescence microscopy. For users with limited optics experience, a dichroic mirror can be described simply as a selective beam splitter that directs the right wavelengths to illumination and detection paths, thereby producing cleaner emission and more reliable interpretation of fluorescent signals. Practical guidance for integration and laboratory use The filter set is intended as an optical solution for GFP fluorescence tasks and is labelled DZ.9061 for straightforward identification. For integration into existing setups, note that spectral compatibility (excitation and emission ranges) is the primary selection criterion; mechanical mountings vary by manufacturer and should be checked before purchase. If uncertainty remains about suitability for a specific microscope or camera, additional technical details can be supplied on request — Metav Werkzeuge offers expert advice to verify compatibility and to help specify the correct optical components for each application. For dependable GFP fluorescence performance with Euromex optics, contact Metav Werkzeuge in Emmerich for ordering and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: DZ.9061 SKU: DZ.9061 Manufacturer: Euromex Product type: Microscope filter Label: Filtersatz GFP-LP zur Erregung im blauen Bereich, EX460-500, DM505, EM510 Longpass DZ.9061 Core specifications Excitation range: 460–500 nm (EX460–500) Dichroic mirror cut-on: 505 nm (DM505) Emission: 510 nm longpass (EM510 Longpass) Special features GFP-LP filter set Blue-range excitation for GFP and similar fluorophores Longpass emission at 510 nm for reduced bleed-through Designed for fluorescence microscopy applications SKU DZ.9061 FAQ What fluorophores is this filter set optimised for? This Filterset GFP-LP (Euromex, DZ.9061) is optimised for GFP and fluorophores with excitation maxima within the 460–500 nm band; it is suitable where a 510 nm longpass emission is acceptable. Will the filter set prevent excitation light reaching the detector? Yes. The combination of the DM505 dichroic and the EM510 longpass is designed to reduce excitation bleed-through, improving emission detection in GFP-type imaging when used with compatible optics. Can this filter set be used with LED and arc-lamp illumination? The spectral specifications (EX460–500, DM505, EM510 Longpass) define optical compatibility; both LED and arc-lamp sources that provide sufficient intensity within the excitation band can be used with the Filterset GFP-LP (Euromex, DZ.9061), subject to the microscope’s optical path. How should the filter be cleaned to avoid damage? Use manufacturer-recommended optical cleaning materials and procedures; avoid abrasive cloths and strong solvents. For specific cleaning instructions for the Euromex Filterset GFP-LP (DZ.9061), consult technical guidance before attempting maintenance. Is this filter set suitable for quantitative fluorescence measurements? The filter set provides spectral selectivity that supports improved signal-to-noise, which is beneficial for comparative measurements; for quantitative assays, pair the Filterset GFP-LP (Euromex, DZ.9061) with calibrated illumination and detection hardware to ensure measurement accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Focusing Head for LE.5224/LE.5228 Objectives or LE.5231 Filter, Microscope Illumination Accessory - Euromex
Take advantage of a compact, compatibility-focused accessory that ensures precise alignment with common Euromex focussing optics and integrates easily into existing illumination setups; the accessory delivers consistent optical positioning and reduces setup time. Order the LE.5222 focusing head directly via Metav Werkzeuge or consult the team for application advice. Euromex LE.5222 focusing head — light guide focussing accessory with objective and filter compatibility LE.5222 is a dedicated focusing head designed to integrate with specific Euromex focussing objectives and a matching filter for controlled illumination and accurate optical alignment Compatible with LE.5224 and LE.5228 objectives Fits filter LE.5231 Compact illumination accessory Designed for precise optical alignment Integration that saves setup time and prevents misalignment The focusing head is engineered for straightforward integration with established illumination systems and is compatible with the noted Euromex focussing objectives. By matching the optical interface of common focussing lenses and the specified filter, the accessory simplifies the assembly process and reduces the iterative adjustments normally required. This results in faster set-up, consistent alignment across multiple stations and fewer inspection delays, supporting a smoother production flow. Reliable optical positioning for repeatable results Consistent, repeatable positioning of illumination components is achieved thanks to the accessory’s alignment-focused design. The unit supports precise centring and stable fixation of the light guide and lens assembly, which helps maintain measurement repeatability and image consistency during routine inspections. For laboratories and workshops requiring dependable optical performance, this contributes to lower rework rates and a measurable improvement in process reliability. Practical handling and compatibility guidance for workshop use The accessory is compact and intended as an add-on for existing lighting and focussing arrangements, allowing straightforward retrofitting without major modifications. Compatibility with the two focussing objectives and the filter means the component can be specified with confidence when planning optical setups. If further technical specifications or confirmation of fit are required, Metav Werkzeuge provides application advice and technical clarification to ensure the accessory meets workshop requirements. Contact Metav Werkzeuge for further compatibility checks, quoting and distribution: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; phone +49 2822 7131930; info@metav-werkzeuge.com Technical data Article number: LE.5222 SKU: LE.5222 Product type: Light guide focusing accessory Brand: Euromex Label: Fokussierkopf geeignet für Fokussierobjektiv LE.5224, LE.5228 oder Filter LE.5231 LE.5222 Facts Image file size: 62110 bytes Image ID: 6af1a51cd8ecf2f60acae068 Special features Compatible with focussing objectives LE.5224 and LE.5228 Fits filter LE.5231 Intended for integration with light guide illumination setups Suitable as a precision alignment accessory for optical benches FAQ Is the accessory compatible with other Euromex objectives? The focusing head has been specified for use with the stated Euromex objectives LE.5224 and LE.5228; compatibility with other objectives depends on the optical interface and should be confirmed against the LE.5222 technical fit dimensions. Can the LE.5222 be used with alternative filters? The accessory is specified to fit filter LE.5231; use with alternative filters requires verification of the housing and optical path to ensure correct alignment with the LE.5222 focussing interface. Does the unit require specialised tools for installation? Installation of the LE.5222 is intended to be straightforward within standard illumination assemblies; specialised tools are generally not required but retention hardware should match the optical bench or mounting system used. How does the focusing head affect inspection reproducibility? By providing stable and repeatable alignment between the light guide and focussing optics, the accessory improves reproducibility of illuminated inspections and reduces positional variance between runs. Which SKU should be ordered for this accessory? Order under SKU/Article number LE.5222; Metav Werkzeuge can confirm availability and advise on logistics for integration into existing setups. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Frosted White Filter Microscope Filter EcoBlue EC.9710 - Euromex
Take advantage of the frosted white diffusion and the compact EcoBlue format to achieve more even illumination with minimal setup. The combination of reliable light diffusion and simple reordering via SKU EC.9710 keeps laboratory workflows efficient and predictable. Order the EcoBlue filter directly via Metav Werkzeuge or consult our specialists for application advice. EcoBlue EC.9710 microscope filter — frosted white diffusion for illumination control (Euromex) The EcoBlue EC.9710 is a frosted white microscope filter designed to provide uniform light diffusion for transmitted and reflected illumination in routine microscopy and teaching environments. Frosted white light diffusion filter Compatible with EcoBlue illumination series SKU EC.9710 for easy reordering Improve image evenness with simple light diffusion The frosted white surface offers consistent light diffusion, reducing harsh hotspots and minimising specular reflections that can obscure fine detail. By delivering a smoother illumination field, the filter helps to enhance perceived contrast on brightfield and incident-light setups without altering colour balance. For laboratories and education facilities this means fewer adjustments to lamp position and quicker image capture, supporting a more predictable workflow and reducing inspection time per sample. Easy inventory and compatibility for lab workflows Designed for the EcoBlue series, the EC.9710 is supplied as a straightforward illumination accessory that can be integrated into existing lighting modules or strut-mounted holders. The clear identification via EC.9710 simplifies stock control and reordering, which is particularly helpful for procurement teams managing multiple campuses or teaching labs. Where fast replacements are required, the compact identification reduces lead time and administrative overhead, keeping equipment availability reliable. Practical benefits backed by distribution and support Selecting a standardised diffusion accessory reduces variability between setups and supports reproducible results across operators. The filter is a low-complexity, high-impact item that helps maintain consistent sample presentation, especially useful during comparative assessments or student demonstrations. Metav Werkzeuge supplies the product with transparent logistics and can advise on compatibility and inventory planning to keep production and teaching uninterrupted, reflecting a commitment to accessible precision tools for professional and educational use. For straightforward illumination improvement with the Euromex EcoBlue EC.9710, contact Metav Werkzeuge for ordering and technical guidance; fast dispatch from Emmerich and expert assistance are available via info@metav-werkzeuge.com Technical data Article number: EC.9710 SKU: EC.9710 Product type: Microscope filter Model series: EcoBlue Facts No measurable characteristics provided Special features Frosted white diffusion filter Brand: Euromex Source: Education PDF-S. 9 FAQ What is the primary function of this filter? The frosted surface of the EcoBlue EC.9710 provides uniform light diffusion to reduce hot spots and improve visual evenness in microscopy illumination. Is the filter compatible with other EcoBlue accessories? Compatibility is intended for the EcoBlue illumination series; the EC.9710 fits common accessory mounts used with EcoBlue modules. Can the EC.9710 be used for photomicrography? Yes, the diffusion provided by the EC.9710 helps to create more even lighting for photography, which can reduce post-processing for exposure correction. How should the filter be cleaned? Clean the filter gently with a lint-free cloth and a mild optical cleaner; avoid abrasive materials to preserve the frosted surface. How is the item identified for reordering? Reorder using SKU EC.9710 and the model designation EcoBlue to ensure the correct frosted diffusion filter is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
GFP-BP Filter Set EX460-500 DM505 EM510-560 Bandpass - Euromex
Take advantage of a filter set that combines targeted blue-range excitation with precise emission bandpass separation to improve GFP contrast and repeatability in fluorescence imaging. The clear specification of EX460–500 / DM505 / EM510–560 supports reliable signal detection and easier protocol validation; order the part directly via Metav Werkzeuge or consult their technicians for integration advice. GFP-BP filter set DZ.9060 — Microscope filter for blue excitation (EX460–500 / EM510–560) by Euromex The GFP-BP filter set DZ.9060 is a fluorescence microscope filter configured to excite in the blue spectral range and to collect GFP-compatible emission, optimised for routine and research imaging applications GFP bandpass excitation for blue range Excitation 460–500 nm bandpass Dichroic mirror at 505 nm Emission 510–560 nm bandpass Sharper GFP contrast through precise excitation control The filter set delivers a clearly defined excitation 460–500 nm window that concentrates illumination on the blue spectral band typically used for GFP and similar fluorophores. By restricting excitation light to this range, the ensemble minimises off-target excitation and reduces background fluorescence, which leads to a higher signal-to-noise ratio and more reproducible results across experiments. The bandpass design also simplifies protocol transfer between microscopes by providing a predictable optical response for quantitative imaging workflows. Reliable separation of excitation and emission for clean images A DM505 dichroic mirror separates excitation and emission paths at a controlled transition wavelength, while the emission 510–560 nm bandpass passes the desired fluorescent signal to the detector. This combination reduces spectral bleed-through and improves contrast without requiring complex post-processing. For applications where clear visual distinction and consistent intensity measurements matter, the optical arrangement supports both qualitative inspection and semi-quantitative imaging, helping to shorten the validation cycle and increase confidence in experimental outcomes. Practical integration and lab-ready characteristics As a dedicated microscope filter set for fluorescence applications, the configuration is suitable for GFP imaging and comparable fluorophores; the item is identified as DZ.9060 and supplied by Euromex. The compact specification and standard bandpass naming make it straightforward to match with common fluorescence filter cubes and modular microscope holders. If supplementary technical details are required for integration into an existing system or for protocol optimisation, Metav Werkzeuge can provide additional documentation and guidance — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical enquiries. For dependable GFP imaging, request the Euromex DZ.9060 GFP-BP filter set through Metav Werkzeuge — consultants at Metav Werkzeuge will advise on compatibility and supply options; contact info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DZ.9060 SKU: DZ.9060 Manufacturer: Euromex Product type: Microscope filter Category: Fluorescence Facts Excitation: 460–500 nm Dichroic mirror: 505 nm Emission: 510–560 nm Special features GFP-BP bandpass filter set Blue-range excitation for GFP and similar fluorophores Bandpass designation EX460–500 / DM505 / EM510–560 Suitable for fluorescence microscopy SKU DZ.9060 FAQ What wavelengths does this filter set use for excitation and emission? The Euromex GFP-BP filter set DZ.9060 uses an excitation band of 460–500 nm, a dichroic at 505 nm, and an emission band of 510–560 nm to capture GFP-type fluorescence. Is the DZ.9060 suitable for classic GFP and GFP derivatives? Yes, the spectral windows of the DZ.9060 are optimised for GFP and closely related fluorophores, providing targeted excitation and selective emission collection for clear GFP imaging. Will this filter set reduce spectral bleed-through in multicolour setups? The combination of a defined excitation bandpass and a DM505 dichroic with a matching emission bandpass helps to minimise bleed-through between adjacent channels, improving separation in multi-channel fluorescence experiments. Can the filter set be cleaned and maintained without affecting performance? Routine cleaning with lens tissue and manufacturer-recommended solutions is appropriate; avoid abrasive cleaners. The optical coatings and bandpass characteristics of the DZ.9060 should remain stable when handled according to standard microscopy care guidelines. How is the DZ.9060 identified for ordering and inventory? The product is listed as Euromex GFP-BP filter set, article number DZ.9060, category Fluorescence, which can be used for procurement and stock management. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
IS.9731 150mm Slide with Green and Blue Filters for iScope, Microscopy Accessory - Euromex
Take advantage of the combination of precise contrast control, compact slide format and dependable compatibility for smoother microscopy workflows; order the product directly via Metav Werkzeuge or ask the consultants if needed. Filter slide with green and blue filters for iScope IS.9731 — Euromex microscope filter slide, two-stage contrast enhancement A filter slide with green and blue filters for iScope IS.9731 is designed to provide fast contrast adjustment and simple insertion for routine inspection and laboratory tasks. Compatible with iScope series filter holders Includes green and blue optical filters Slide format for rapid exchange Improve contrast without complex adjustments The combination of a green filter and a blue filter offers straightforward contrast control for a wide range of specimens and inspection tasks. By inserting the appropriate filter into the optical path, visual differentiation of structures and surface details is improved with minimal adjustments to illumination. This approach reduces the need for repeated focusing changes and enables faster inspection cycles, which is particularly helpful in high-throughput or repetitive measurement environments. The design supports consistent results across multiple samples while maintaining ease of use. Compact slide format for efficient workflow The slide format lets operators swap filters quickly during an examination, reducing downtime between observations. The unit is expressly developed for the iScope series, ensuring proper seating in standard iScope filter holders and predictable optical alignment. Because the slide is engineered for simple insertion and removal, process steps are streamlined and handling remains ergonomic even during prolonged sessions. This practical format supports laboratories and workshops that require quick transitions between contrast settings without complex accessory changes. Practical benefits for inspection and documentation Using colour filters in microscopy often improves both subjective visibility and objective documentation quality. The green filter typically enhances mid-range contrast, while the blue filter can sharpen edge definition under many lighting conditions. These effects can make features more identifiable in images captured for reporting or archiving, helping to reduce retakes and improve throughput. The accessory is therefore suitable for routine quality checks, educational use and any application where consistent visual differentiation matters. Integration, care and reliability The accessory is supplied as a ready-to-fit slide compatible with the iScope range and marked with SKU IS.9731 for unambiguous identification. Basic handling guidance: install the slide using the microscope’s filter holder, keep optical surfaces free of dust and fingerprints, and store the slide in a dry, dust-free environment when not in use. For cleaning, use appropriate lens-cleaning materials and avoid abrasive contact with the filter surfaces. If additional technical data or clarification on compatibility is required, Metav’s technical advisors are available to assist; contact details are provided below. Contact Metav Werkzeuge today to request the Euromex IS.9731 filter slide for iScope systems or to obtain specialist advice on integrating these filters into existing inspection routines. Technical data Article number: IS.9731 SKU: IS.9731 Brand: Euromex Product type: Microscope filter Numerical data No dimensional or weight specifications supplied Special features Green filter Blue filter Designed for iScope series Slide format for quick exchange Image available: IS.9731.jpg FAQ What microscopes is this filter slide compatible with? The filter slide IS.9731 is designed for compatibility with the iScope series and fits standard iScope filter holders. How do the green and blue filters affect image contrast? The green filter increases mid-range contrast and the blue filter sharpens edge definition under suitable illumination, improving feature visibility for inspection and documentation. Is the slide marked for identification during inventory? Yes, the item is supplied with SKU IS.9731 and the Euromex designation for straightforward inventory management. What is the recommended cleaning method for the filters? Clean the filter surfaces using lens tissue and suitable, non-abrasive optical cleaner; avoid touching the glass with bare fingers. Can the filter slide be used for both biological and material inspection? The slide offers improved visual contrast suited to a variety of specimens and surfaces and can be used across routine biological and material inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope IS.9160 Phase Contrast Accessory Phase Contrast Slider Set, 10x & S40x PLPH Annuli - Euromex
Take advantage of a complete phase contrast slider set that combines 10x and S40x PLPH objectives with matching annuli, delivering clearer contrast for unstained specimens and faster sample evaluation; order the accessory directly via Metav Werkzeuge or consult their specialists for integration advice. iScope IS.9160 Phase Contrast Slider Set — 10x & S40x PLPH (Euromex) iScope IS.9160 is a phase contrast slider set designed for transmitted‑light microscopy, providing matched annuli and objectives for high‑contrast observation of unstained biological samples. Complete phase contrast slider set Includes 10x and S40x PLPH objectives Annuli matched for 10/S40x PLPH objectives Compatible with optional 20x PLPH objective Clearer imaging of unstained specimens for routine workflows The phase contrast slider set delivers a significant improvement in visibility for transparent samples by converting phase shifts into intensity differences. Built around PLPH objectives at 10x and S40x, the accessory includes annuli matched to those objectives so that condenser and objective are optically aligned for optimal contrast. This alignment reduces the need for staining in many standard procedures, enabling faster throughput and less sample preparation. The design supports reproducible results in routine laboratory and life‑science workflows. Straightforward fitting and optical compatibility for microscopes Installation is carried out via the microscope’s condenser and nosepiece, where the slider and annuli are inserted and aligned; the set is compatible with transmitted‑light instruments equipped for phase contrast. The modular nature of the components ensures straightforward retrofitting to existing stands that accept PLPH series optics. The provision for an optional 20x PLPH objective broadens working magnification choices without altering the core condenser configuration, facilitating flexible adoption across different inspection tasks. Efficiency and practical benefits for everyday laboratory use Using phase contrast reduces reliance on dyes and saves processing time, which supports quicker decision cycles in teaching labs, routine diagnostics and research benches. The matched objective‑annulus pairing promotes consistent image quality across sessions, helping to standardise observations and reduce user variability. For teams seeking dependable results with minimal workflow disruption, the slider set offers a pragmatic performance upgrade that balances optical quality and operational efficiency. Maintenance, alignment guidance and technical clarity The slider set includes annuli sized for the 10x and S40x PLPH objectives, which must be centred during condenser alignment to achieve peak performance. Regular, careful cleaning of optical surfaces and correct seating of the slider are sufficient to preserve image quality; no specialised consumables are required beyond standard optical cleaning materials. Detailed specifications and the original source information are documented in the Life Science PDF (pages 16 and 42), supporting traceable technical information for procurement and training. Contact Metav Werkzeuge to discuss how the Euromex iScope IS.9160 can be integrated into existing microscopes or to request a tailored recommendation from the Emmerich team Technical Data Article number: IS.9160 Manufacturer: Euromex Model series: iScope Product type: Phase contrast accessory SKU: IS.9160 Core data Objectives: 10x; S40x; compatible with optional 20x PLPH Annuli: for 10/S40x PLPH objectives Source reference: Life Science PDF pages 16, 42 Special features Phase contrast slider set Designed for transmitted‑light microscopes Matched annuli for PLPH objective series Enables high‑contrast imaging of unstained specimens FAQ What is included in the iScope IS.9160 slider set? The iScope IS.9160 contains a phase contrast slider with annuli matched to the 10x and S40x PLPH objectives; it is also suitable for an optional 20x PLPH objective. Which microscopes are compatible with this set? Compatibility requires a transmitted‑light microscope equipped to accept PLPH‑series optics and a condenser capable of housing the phase contrast slider; the iScope IS.9160 is designed for such configurations. Can the iScope IS.9160 be used with a 20x PLPH objective? Yes, the iScope IS.9160 is compatible with an optional 20x PLPH objective when the appropriate annulus and condenser alignment are applied. How does phase contrast in this accessory improve observation? The slider set converts otherwise invisible phase shifts in transparent specimens into brightness differences, allowing the iScope IS.9160 to reveal structure in unstained samples and reduce the need for preparative staining. Are annuli and objectives supplied pre‑matched? Annuli are supplied to match the 10x and S40x PLPH objectives included with the slider set; correct centring and condenser alignment are required for optimal results. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope IS.9170 Darkfield Attachment Slider with Darkfield Stop, Up to 400x - Euromex
Take advantage of a compact darkfield slider that delivers improved contrast for unstained samples and supports magnifications up to 400x; the combination of simple insertion and compatibility with the iScope series helps streamline routine observation and teaching workflows. Order this accessory directly via Metav Werkzeuge or consult their experts for fit and availability. iScope IS.9170 Darkfield slider by Euromex — darkfield stop, up to 400x The iScope IS.9170 is a darkfield slider designed to introduce efficient contrast enhancement for routine brightfield microscopes, optimised for educational and life-science applications Darkfield stop for enhanced contrast Suitable for magnifications up to 400x Compatible with iScope series Compact slider design for easy insertion See unstained structures with greater contrast and clarity The darkfield principle diverts central illumination so only scattered light from the specimen reaches the objective, producing a dark background and bright specimen features. For routine tasks in teaching labs or basic life-science work, this means improved visibility of edges, refractive particles and motile microorganisms without staining. With a maximum useful magnification of up to 400x, the slider enables observation of fine detail while keeping the optical path simple and reproducible, supporting faster assessment and documentation. Fast insertion and reliable alignment for routine workflows Engineered as a compact slider, the accessory fits into a condenser or intermediate slot and can be introduced or removed quickly during a session, reducing downtime between contrast methods. The mechanical simplicity reduces alignment needs; once set, the darkfield stop provides stable performance across successive samples. This format suits environments where speed and repeatability matter, such as teaching practicals and routine specimen checks, and helps maintain consistent image quality without complex adjustments. Practical use cases and observable benefits in education and labs The slider is particularly useful for observing live preparations, pond water sampling, and thin, unstained tissue sections where transmitted darkfield illumination enhances structural detail. As a lightweight accessory compatible with the iScope series, it supports modular microscope setups and allows facilities to expand contrast capability without changing core optics. The result is a cost-effective route to improved diagnostics and clearer demonstrations in both classroom and bench-top settings. Contact Metav Werkzeuge for availability and expert advice on integrating the Euromex iScope IS.9170 darkfield slider into existing microscopes Technical data Article number: IS.9170 SKU: IS.9170 Manufacturer: Euromex Model series: iScope Product type: Darkfield slider Label: Dunkelfeld-Einrichtung iScope IS.9170 UID: IS.9170 Facts Maximum magnification: up to 400x Special features Slider with darkfield stop Compatible with iScope series Suitable for education and life-science applications Source reference: Education PDF p.25; Life Science PDF p.16 FAQ What magnification range does the darkfield slider support? The darkfield slider supports useful observation up to 400x, as indicated for the Euromex iScope IS.9170. Is the slider compatible with non‑Euromex microscopes? Compatibility is optimised for the iScope series; the Euromex iScope IS.9170 is designed for insertion into compatible condenser or slider ports, but compatibility with other brands depends on the instrument's mechanical fittings. What specimens benefit most from darkfield illumination? Unstained, low‑contrast samples such as pond water, motile microorganisms and thin tissue sections show markedly improved visibility when observed with a darkfield arrangement like the iScope IS.9170. Does the slider require frequent alignment or maintenance? The compact slider design minimises alignment needs; routine cleaning of optical surfaces preserves performance and keeps the darkfield stop functioning as intended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope IS.9601 150mm Polarisation Set Simple Rotating Polarizer, Mounted Under Head - Euromex
Benefit from enhanced sample contrast through a simple rotating polariser in the lamphouse and a fixed analyser mounted under the head for quick, reliable polarised-light imaging; order the accessory directly via Metav Werkzeuge or request advice from our consultants. Microscope polarisation set iScope IS.9601 — simple rotating polariser and fixed analyser for lamphouse integration A compact polarisation accessory designed to add polarised-light capability to compatible iScope microscopes for enhanced contrast and material characterisation. Simple rotating polariser for lamphouse Fixed analyser mounted under head Not compatible with SLC models Reveal structure and detail with polarised light Polarised illumination highlights birefringence and internal structure in anisotropic materials, making otherwise invisible features visible. This accessory introduces polarisation without altering existing optical paths, improving contrast for minerals, fibres and crystalline substances. For technicians and educators, the technique provides a clear, measurable way to distinguish materials and defects; the explanation of how polarised light interacts with samples enables better diagnosis and reproducible results. Fast fit and intuitive operation for routine workflows Installation is kept straightforward: a rotating polariser is mounted into the lamphouse while a fixed analyser takes position under the microscope head, allowing quick alignment and rotation-based control of extinction angles. The design reduces setup time and minimises adjustments during repeated examinations, supporting efficient throughput in teaching labs and inspection benches. The compact format ensures minimal footprint and preserves existing illumination settings while enabling polarised imaging. Practical applications and compatibility guidance The set is suitable for educational use, life-science demonstrations and basic material inspection where polarised contrast helps identify textures, stress patterns or crystalline orientation. Note that the accessory is explicitly not compatible with SLC models; confirm compatibility with the instrument variant before purchase. For environments where reproducibility and clear visual evidence are required, the polarisation accessory provides a cost-effective means to upgrade imaging capability without replacing the main microscope. Contact Metav Werkzeuge for availability and tailored technical guidance on integrating the iScope IS.9601 into existing optics and workflows. Technical data Article number: IS.9601 SKU: IS.9601 Model series: iScope Product type: Microscope polarisation set Brand: Euromex Core specifications Polariser type: rotating (lamphouse) Analyser position: fixed, mounted under head Compatibility note: not suitable for SLC models Source references: Education PDF p.25; Life Science PDF p.16, 42 Features Simple rotating polariser for lamphouse Fixed polariser/analyser mounted under head Intended for polarised-light contrast enhancement FAQ What improvements does polarisation provide in microscopy? Polarisation increases visual contrast by revealing birefringence and anisotropic structures; the iScope IS.9601 enables polarised-light observation to distinguish material phases, stress patterns and crystalline textures that remain subtle under normal brightfield illumination. How is the set mounted and adjusted? The set comprises a rotating polariser inserted into the lamphouse and a fixed analyser mounted under the head; rotation of the polariser changes extinction angles and contrast without complex realignment of the main optical train. Is the polarisation set compatible with all iScope models? Compatibility varies by model; the polarisation set is designed for iScope series instruments but is not suitable for SLC models—confirm the microscope variant before ordering. Which applications benefit most from this accessory? Teaching laboratories, introductory polarised-light demonstrations, life-science observation of fibrous structures and basic material inspection all benefit from the enhanced contrast and simple operation offered by this polarisation set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope IS.9749-6 Microscope Filter 6-Position Fluorescence Attachment - Euromex
Take advantage of the empty filter cube as a flexible solution for fluorescence setups and the compatibility with a six‑position turret, ensuring fast reconfiguration of filter sets for specific fluorophores; order directly via Metav Werkzeuge or ask their consultants for assistance. iScope IS.9749-6 microscope filter — empty filter cube for six‑position fluorescence turret (Euromex) The iScope IS.9749-6 is an empty filter cube designed for use with six‑position fluorescence attachments, providing a modular platform to install excitation and emission filter sets for fluorescence microscopy applications. Empty cube for six‑position fluorescence turret Designed for iScope fluorescence attachments Enables custom excitation and emission sets Robust optical housing for stable alignment Flexible configuration for specialised fluorescence protocols The supplied unit functions as an empty filter cube, which means no filters are preinstalled and the optical bay is prepared to accept bespoke filter sets. This approach gives laboratories the freedom to equip the cube with custom filter sets matched to particular fluorophores, improving signal separation and contrast. The modular arrangement reduces the need for multiple dedicated microscope heads and accelerates adaptation to new dyes or assays. By allowing tailored excitation and emission combinations, the system supports efficient laboratory workflows and reduces instrument downtime when protocols change. Seamless integration with six‑position fluorescence turrets Designed specifically for a six‑position turret, the cube integrates with a typical iScope fluorescence attachment to provide quick rotation between filter positions. The mechanical fit supports rapid switching of filter assemblies to compare channels or acquire multi‑channel images without lengthy reconfiguration. Because the cube is intended for fluorescence work, the installation of matched excitation and emission pairs is straightforward, enabling reliable optical paths for both single‑colour and multi‑colour experiments while maintaining consistent alignment across positions. Stable optical mounting to preserve alignment and image quality A deliberately simple and precise housing keeps the optical elements in place and minimises stray light that could degrade fluorescence contrast. The component is engineered to maintain the relative position of filters in the light path so that optical alignment is preserved during routine rotation and handling. This stability is particularly beneficial for repeated measurements and time‑lapse imaging, where consistent channel registration matters for quantitative analysis. The empty cube concept avoids compromises produced by preassembled, non‑replaceable filter mounts and supports long‑term maintainability. Sourcing, configuration advice and the value of a trusted partner When acquiring optical accessories, the choice of supplier affects availability and technical backup. Metav stands for a democratisation of precision: a wide assortment of measurement and workshop products is combined with decades of expertise and reliable logistics from Emmerich. With over 48,000 satisfied customers and a catalogue exceeding 250,000 items, Metav enables access to components such as this fluorescence cube while reducing procurement complexity. If uncertainty exists about filter dimensions or suitable excitation/emission combinations, Metav’s consultants can advise on compatible filter sets and turret arrangements to suit specific microscopy tasks. Contact Metav Werkzeuge for tailored advice on fitting filter sets to the Euromex iScope IS.9749-6 and to confirm turret compatibility before purchase. Technical Data Article number: IS.9749-6 Model series: iScope Product type: Microscope filter Brand: Euromex Facts Positions: 6 SKU: IS.9749-6 Special features Empty filter cube For six‑position fluorescence attachment Compatible with iScope fluorescence turret Category: Fluorescence microscopy accessory FAQ What does "empty filter cube" mean for laboratory use? An empty filter cube like the iScope IS.9749-6 is supplied without filters installed, allowing laboratories to fit their chosen excitation and emission filter sets to match specific fluorophores. Which turret type is the cube intended for? The cube is configured for a six‑position fluorescence turret and is designed to integrate with iScope fluorescence attachments (SKU IS.9749-6). Are any filters included with the cube? No filters are included; the iScope IS.9749-6 is delivered empty so that custom filter pairs can be mounted according to experimental requirements. Can the cube be used for multi‑colour imaging setups? Yes, by installing appropriate filter sets in each position of the six‑position turret, the cube supports multi‑channel fluorescence work and sequential acquisition strategies. Is this cube compatible with non‑iScope microscopes? The cube is designed for the iScope fluorescence attachment; mechanical compatibility with other systems depends on turret dimensions and mount interfaces, which should be checked against the target instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope IS.9880 Microscope Illumination, Compact Design - Euromex
Take advantage of uniform Köhler illumination and simple series compatibility to improve image consistency in teaching and routine laboratory work; order the Euromex iScope IS.9880 via Metav Werkzeuge or consult our specialists for integration advice. iScope IS.9880 microscope illumination with Köhler attachment by Euromex The iScope IS.9880 is a microscope illumination unit equipped with a Köhler attachment, intended as a reliable accessory for microscopy applications within the iScope series. Köhler attachment for uniform illumination Compact design for easy integration Compatible with iScope series microscopes Clear, even illumination for sharper images The integration of a Köhler attachment ensures uniform illumination across the field of view, which reduces stray light and enhances contrast in transmitted-light microscopy. Köhler illumination separates the lamp filament image from the sample plane, producing an even light field that supports reproducible imaging and more reliable observations. For users transitioning from basic lamp mounts, this accessory clarifies the optical path and stabilises lighting conditions, directly improving visual assessment and documentation in routine tasks. Smooth fitting into existing iScope workflows Designed to align with the iScope product family, the unit offers straightforward mechanical and optical compatibility with related accessories and condenser setups. Its compact design minimises footprint on the microscope stand and simplifies retrofitting on compatible models, which helps to reduce setup time and limits interruption to teaching schedules or production routines. The modular nature of the illumination unit supports quick replacement or repositioning, aiding workshop efficiency without extensive reconfiguration. Practical choice for education and everyday laboratory use As a focused accessory for everyday microscopy, the illumination unit supports repeated sessions typical in training and quality-control environments. The construction emphasises functional longevity and ease of use, offering consistent lighting for specimen inspection, slide demonstration and comparative observation. By providing steady performance as part of the optical chain, this accessory contributes to predictable results across multiple users and sessions, a key advantage in shared laboratory settings. Why this illumination makes sense for procurement Selecting an accessory that standardises the illumination method helps to streamline workflows and reduces the need for extensive operator training on light alignment. Metav stands for democratisation of precision: the company combines decades of expertise with a broad product range to supply dependable metrology and laboratory equipment. With a central distribution and quality check in Emmerich, Metav supports a reliable supply chain and a comprehensive product offering that suits industry, craft and specialist retailers. For additional technical clarifications, the Metav team is available by email or phone. Contact Metav Werkzeuge for tailored advice on integrating the Euromex iScope IS.9880 Köhler illumination into existing microscopes and to arrange prompt supply from our Emmerich centre Technical Data Article number: IS.9880 SKU: IS.9880 Manufacturer: Euromex Series: iScope Product type: Microscope illumination Short description: Köhler attachment; microscopy accessory Facts No numerical specifications provided in the product file Special features Köhler attachment Designed for the iScope series Category: Microscopy accessories > Miscellaneous > Condensers Label: Mikroskopbeleuchtung iScope IS.9880 FAQ What does the Köhler attachment improve on this illumination unit? The Köhler attachment on the Euromex iScope IS.9880 separates the lamp filament image from the specimen plane to deliver even, glare-free light that improves contrast and repeatability in transmitted-light microscopy. Is the illumination compatible with other iScope accessories? Compatibility is intended within the iScope series; the illumination unit is designed to integrate with related accessory mounts and condenser configurations in the same product family. Can this unit be used for teaching and routine inspections? Yes, the illumination unit is suitable for educational use and routine laboratory inspections where stable and uniform lighting supports consistent observations. Does the product include a lamp or require a separate light source? The product file specifies the illumination unit and Köhler attachment; details on included light sources are not provided in the product data and should be confirmed with Metav Werkzeuge. What is the exact article number and SKU for ordering? The Euromex iScope IS.9880 is listed with article number and SKU IS.9880 for procurement and reference. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope Phase Contrast Slider Set with 10x and S40x PLPHi IOS Objectives, Compatible with 20x - Euromex
Take advantage of a compact phase-contrast solution that combines infinity-corrected PLPHi optics, dedicated annuli for 10x and S40x, and compatibility with an optional 20x objective to enhance contrast for transparent samples — order via Metav Werkzeuge or ask their consultants for application advice and fast supply. Phase contrast accessory iScope IS.9162 — slider set with 10x and S40x PLPHi IOS objectives by Euromex The Phase contrast accessory iScope IS.9162 is a slide-in module designed to convert compatible microscopes into optimised phase-contrast instruments for imaging unstained biological specimens. Phase contrast slider set for iScope systems 10x PLPHi IOS infinity-corrected objective S40x PLPHi IOS infinity-corrected objective Annuli included for 10x and S40x; 20x optional Improved visibility for transparent samples and faster workflow This phase-contrast module delivers clearer detail for low-contrast specimens by converting phase shifts into intensity differences. The slider set, equipped with 10x and S40x PLPHi infinity-corrected objectives and matched annuli, shortens time to result by reducing or eliminating staining steps and enabling direct observation of live cultures. The combination of phase contrast optics and an easy-to-insert slider supports a steady laboratory workflow, reducing handling time and improving throughput for routine inspections and teaching environments. How the optics work and why infinity correction matters Infinity-corrected objectives project parallel light to the tube lens, which preserves image quality across intermediate optical components; this is especially important when adding phase elements. The included annuli form the phase ring in the condenser plane while the PLPHi objectives carry a corresponding phase plate at the back focal plane, producing visible contrast without dyes. For non-specialist users, this means improved edge definition and internal structure visibility with minimal optical alignment — the instrument yields reliable contrast enhancement while maintaining native specimen conditions. Integration with the iScope line and practical handling benefits Engineered for compatibility with the iScope microscope series, the slider set installs quickly into the nosepiece or dedicated slot, allowing fast switching between brightfield and phase contrast modes. The modular design supports an optional 20x objective should higher intermediate magnification be required, and the compact unit conserves bench space. The overall result is a practical add-on that supports both research benches and teaching labs with modest equipment changes, improving observational capacity without a full system upgrade. Typical applications and quality assurance for daily use Ideal applications include live cell observation, microbiology checks and routine diagnostics where specimen staining is undesirable or impractical. The optical design by Euromex emphasises consistent image quality and repeatability, making it suitable for repeated use in demanding workflows. If clarification of compatibility or additional technical specifications is needed, technical assistance is available to ensure correct selection and integration of the module with existing microscopes. For tailored advice on integrating Euromex phase-contrast optics, contact Metav Werkzeuge in Emmerich for application support and reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930 — consultants are available to verify compatibility and delivery options. Technical Data Article number: IS.9162 Manufacturer: Euromex Model series: iScope Product type: Phase contrast accessory SKU: IS.9162 Label: Phasenkontrast-Zubehör iScope IS.9162 Facts Magnifications: 10x, S40x; suitable for optional 20x Optical design: Infinity-corrected objectives Compatibility: iScope microscope series Special features Slider set with phase contrast module PLPHi IOS infinity-corrected objectives Annuli for 10x and S40x included Source: Life Science PDF (phase contrast set details) FAQ What magnifications are included in the phase-contrast set? The Euromex phase contrast accessory iScope IS.9162 includes 10x and S40x PLPHi IOS objectives and is suitable for an optional 20x objective. Is the slider compatible with other iScope models? The slider set is designed for the iScope series and fits into the appropriate module slot; compatibility can be confirmed with Metav Werkzeuge if model details differ. How do the annuli affect image contrast? Annuli create the condenser-side phase ring that, together with the matched PLPHi objective, converts phase shifts into intensity differences for improved visibility of transparent specimens. Can the set be used for live cell observation without staining? Yes; the phase contrast optics in the IS.9162 are particularly suited to live cell imaging and other situations where staining is undesirable. Where can additional technical data or compatibility advice be obtained? Technical questions and integration advice for the Euromex phase contrast accessory iScope IS.9162 can be directed to Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
iScope Polarisation Model Transmission Quartz Wedge Slider, IS.9604 - Euromex
Taking advantage of the quartz wedge mounted in a precision slider delivers improved transmitted-light contrast and fine polarisation control for iScope systems; its optical-grade construction ensures stable performance in routine laboratory use. Order the component directly via Metav Werkzeuge or consult the technical team for compatibility advice. Euromex IS.9604 Quartz Wedge Slider — Transmitted-Light Accessory The Euromex IS.9604 quartz wedge in a slider is a dedicated transmitted-light accessory developed for iScope polarisation models, enabling refined polarisation adjustment for contrast enhancement in microscopy. Quartz wedge for precise polarisation control Slider mount compatible with iScope polarisation Optimises transmitted-light contrast in microscopy Durable optical-grade quartz construction Precise polarisation control for clearer transmitted-light images The quartz wedge slider functions as a fine polarisation adjuster, allowing smooth phase variation within the transmitted-light beam path. By introducing a controlled optical retardation, the accessory enhances contrast and reveals subtle anisotropic features that standard illumination can miss. The slider format enables reproducible positioning, so alignment becomes a straightforward, time-saving operation. For laboratory workflows that demand consistent results, the combination of a mechanically stable slider and optical-grade quartz reduces the need for repeated manual corrections and supports reliable image capture. Compatibility and practical benefits for polarising iScope systems Designed specifically for polarisation-equipped iScope microscopes, the slider integrates directly into the transmitted-light illumination train without additional adapters. This direct-fit design preserves the instrument’s optical alignment and minimises light loss. The result is improved visibility of birefringent materials and thin sections while maintaining simple installation and removal. For users seeking efficient sample evaluation, the accessory provides a measurable improvement in image quality and workflow speed by enabling quick, repeatable polarisation adjustments with minimal downtime. Robust materials and reliable laboratory performance Manufactured from polished quartz, the wedge offers long-term optical stability and resistance to common laboratory conditions. The choice of quartz as a substrate ensures low thermal expansion and minimal birefringence variation over time, which is particularly important for precision microscopy and documentation. Where consistent results and durability matter, this slider serves as a long-term enhancement to the illumination system. The accessory is presented as a compact filter element that complements existing polarising setups while preserving the microscope’s core optical characteristics. Contact Metav Werkzeuge for compatibility checks and to secure the Euromex IS.9604 quartz wedge slider—technical guidance and supply are available from Emmerich for a reliable fit with iScope polarisation models. Technical data Article number: IS.9604 SKU: IS.9604 Manufacturer: Euromex Product type: microscope filter Category: Polarisation Specifications Image file size: 36267 bytes Special features Quartz wedge in slider for transmitted-light illumination For iScope polarisation models Microscope filter accessory FAQ What is the primary function of the quartz wedge slider? The quartz wedge slider provides adjustable optical retardation for transmitted-light polarisation, improving contrast and revealing anisotropic structures in polarised microscopy setups. Is this accessory compatible with all iScope polarisation models? The IS.9604 is intended for iScope polarisation models; Metav Werkzeuge can confirm model-specific compatibility and advise on correct installation. How does quartz construction benefit microscope performance? Quartz offers thermal stability and consistent optical properties, ensuring long-term reliability and minimised variation in polarisation effects during routine use. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com