Take advantage of high‑resolution measurement, controlled measuring force and seamless data transfer for reproducible results and efficient quality control; order directly via Metav Werkzeuge or consult our specialists for integration advice. DataMet eFORCE 0–150 mm Precision Caliper — E‑Force 1–20 N, 0.5 µm resolution, Wireless & USB (Microtech Metrology) The DataMet eFORCE is a Swiss‑engineered precision caliper designed for Industry 4.0 metrology, combining ultra‑fine resolution with electronic force control for workshop and laboratory measurement tasks 0.5 µm high‑resolution reading system E‑Force force control 1–20 N Wireless and USB HID data transfer High‑resolution readings for decisive measurement results The caliper delivers a 0.5 µm resolution (selectable to 0.001 / 0.01 / 0.1 mm) from a Swiss reading system, allowing fine discrimination of dimensional changes that standard instruments miss. With a certified performance of ±0.005 mm accuracy on external jaws and conformity for internal and depth measurements to ISO 13385‑1, the instrument closes the gap between workshop gauges and metrology lab equipment. The included ISO 17025 calibration certificate (Ilac MRA) demonstrates traceability and removes uncertainty for incoming inspection and acceptance protocols. Consistent measurement through controlled contact force Measurement variability caused by human pressure is reduced by the integrated E‑Force force control module. Force can be selected from 1–20 N, with AUTO‑Force and colour indication to confirm correct application; this yields reproducible results on delicate parts and hard‑to‑handle components. A regulated measuring force is particularly valuable for thin‑walled parts and small series production, where repeatability is as important as single‑value accuracy. Seamless data capture and Industry 4.0 readiness A built‑in memory manager stores up to 2,000 values with folder organisation and basic statistics, while wireless transfer to the MDS app (Windows, Android, iOS, macOS) or Wireless/USB HID (keyboard emulation, including macOS variants) enables direct input to inspection software, spreadsheets or ERP systems. The USB‑C port provides both data and charging via a rechargeable Li‑Pol cell (500 mAh), reducing downtime and eliminating frequent battery swaps. Robust construction for everyday industrial use Manufactured in stainless steel with hand‑finished measuring surfaces (Ra < 0.32 µm), the instrument is built for recurring shop‑floor handling and precise contact geometry. The jaw configuration (40/16 mm) supports a wide range of part sizes while maintaining rigidity. Classified as a Standard measuring range device (max. range 150 mm), it offers the optimal compromise between reach, stiffness and single‑hand operation for general engineering, toolroom and quality control applications. Contact Metav Werkzeuge for tailored advice on integrating the DataMet eFORCE into inspection routines and to secure supply from Emmerich. Technical data Article number: 141088015A SKU: 141088015A Brand: Microtech Metrology Label: MICRON DataMet E‑Force Caliper Delivery contents: Messwerkzeug; Free versions of MDS App; USB data/charging cable; Calibration protocol Facts Measuring range: 0–150 mm Resolution: 0.0005 mm (0.5 µm) selectable Accuracy: ±0.005 mm (on external jaws) Measuring force: 1–20 N (E‑Force) Memory: 2,000 values Battery: Li‑Pol 500 mAh, USB‑C charging Jaw lengths: 40/16 mm Special features Swiss reading system, hi‑res 2.0" colour touchscreen Functions: Analog scale, Preset, Graphic, Go/NoGo, Max/Min, Formula, Timer, Linear and temperature correction E‑Force control module with AUTO‑Force and colour force indication Wireless data transfer to MDS app; Wireless HID and USB HID (macOS compatible) Stainless steel construction; measuring surfaces Ra < 0.32 µm Calibration certificate included (ISO 17025, Ilac MRA) Conformity for internal and depth measurements to ISO 13385‑1 FAQ What makes this caliper suitable for both workshop and lab environments? The DataMet eFORCE combines a 0.5 µm resolution Swiss reading system with a robust stainless steel build and ISO 17025 calibration, giving laboratory‑grade traceability while remaining durable enough for routine workshop use. How does the E‑Force module improve measurement reliability? E‑Force provides selectable 1–20 N force control and AUTO‑Force operation; the module prevents variations from manual pressure, ensuring reproducible readings with the DataMet eFORCE caliper. Can measurement data be transferred directly into inspection software? Yes. The caliper supports Wireless transfer to the MDS app and Wireless/USB HID keyboard emulation for direct entry into spreadsheets, inspection software or ERP systems. Is a calibration certificate supplied with the instrument? A calibration protocol is included; the DataMet eFORCE is delivered with an ISO 17025 calibration certificate (Ilac MRA) for documented traceability. What measurement functions are available on the device? The instrument offers analog scale display, preset, graphic view, Go/NoGo checks, max/min, formulas, timer and linear and temperature correction modes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools

Benefit from industrial-grade connectivity, force-controlled repeatability and sub-micron reading precision for reliable quality control; order directly via Metav Werkzeuge or consult our advisors for specification matching. DataMet eFORCE 1–20N Caliper 0–200 mm — Wireless, USB & MODBUS (Microtech Metrology) the DataMet eFORCE 1–20N Caliper is a precision digital caliper for workshop and production use, combining force-controlled measurement, a Swiss reading system and multiple industry-ready data interfaces 0.5 µm Swiss reading system resolution E‑Force force control 1–20 N with AUTO mode Wireless, USB HID and MODBUS RTU connectivity ISO 17025 calibration certificate included Sub-micron certainty for quality control The core strength of this caliper is its 0.5 µm resolution, achieved by a Swiss-made reading system that permits selectable display steps (0.0005 / 0.001 / 0.01 / 0.1 mm). This level of resolution reduces uncertainty when inspecting small features and supports tighter tolerance regimes in component inspection. The specified general accuracy of 0.008 mm provides a reliable performance benchmark for routine dimensional checks, and the selectable resolutions help to balance visibility and statistical handling when compiling measurement data for process control. Stable contact force for repeatable results An integrated E‑Force control module with selectable 1–20 N force settings addresses the most common human factor in caliper measurement: variable closing pressure. AUTO‑Force and a clear colour indication guide operators to the correct contact regime, which reduces scatter between measurements and improves reproducibility during batch inspections. For applications where consistent contact is critical — such as precision assemblies or comparative gauging — force control converts operator variability into a measurable, adjustable parameter. Direct data flow into production systems Designed for Industry 4.0 workflows, the instrument offers multiple transfer modes: Wireless connection to the MDS app (Windows, Android, iOS, MacOS), USB HID, wireless HID variants and a factory-ready MODBUS RTU (RS‑485) output for PLC integration. Memory management stores up to 2000 values in a folder structure with basic statistics, enabling offline logging and bulk transfer. Optional MODBUS ASCII and MODBUS TCP/IP are available on request for tighter network integration. These features streamline data capture and reduce manual transcription errors in quality documentation. Workshop-ready specification and calibrated delivery With a measuring range of 0–200 mm, the instrument falls into the Standard category for machine‑shop use — the practical balance of reach, stiffness and single‑hand operation required for everyday metrology tasks. The package includes a 2.0" colour touchscreen for straightforward operation, USB data/charging cable, free versions of the MDS app and a calibration protocol; delivery is completed with an ISO 17025 (Ilac MRA) calibration certificate. This documented calibration ensures traceability for internal quality systems and external audits without additional preparation. Contact Metav Werkzeuge for a technical consultation and to arrange delivery of a calibrated DataMet eFORCE from Emmerich — tailored advice for integration and spare parts is available from the specialists at Metav Werkzeuge Technical Data Article number: 141088020M UID: 141088020M Brand: Microtech Metrology Model: DataMet eFORCE 1–20N Measuring range: 0–200 mm Resolution: 0.0005 mm (0.5 µm) Accuracy: 0.008 mm Facts Force range: 1–20 N Memory capacity: 2000 values Display: 2.0" colour touchscreen Resolution options: 0.0005 / 0.001 / 0.01 / 0.1 mm Data transfer modes: Wireless to MDS app, Wireless HID, Wireless HID+MAC, USB HID Special features Industry 4.0 adopted E‑Force caliper with computerised MDS system SWISS made reading system with selectable resolutions Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction Memory manager with folders and statistics mode E‑Force control module with Force selection and AUTO‑Force mode 4 modes of data transfer; MODBUS RTU (RS‑485) for industrial connections MODBUS ASCII and MODBUS TCP/IP available on request Calibration certificate included (ISO 17025, Ilac MRA) Delivery set: measuring tool, MDS app free versions, USB cable, calibration protocol, ModBus RTU FAQ What level of resolution and accuracy does the instrument offer? The caliper provides a 0.5 µm (0.0005 mm) reading capability with selectable display steps and a stated accuracy of 0.008 mm, suitable for demanding workshop and inspection tasks. Is the caliper delivered calibrated for traceability? Yes — the instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), and a calibration protocol is included in the delivery set for audit and quality‑system needs. Which interfaces support automated data collection? DataMet eFORCE supports wireless transfer to the MDS app, USB HID, wireless HID variants and MODBUS RTU (RS‑485); MODBUS ASCII and MODBUS TCP/IP can be provided on request for PLC and factory network integration. How does the E‑Force system improve measurement repeatability? The E‑Force module enables selectable contact forces between 1 and 20 N and an AUTO mode, which reduces operator‑dependent variation by enforcing consistent closing pressure and signalling correct measurement force during acquisition. Is the 0–200 mm range suitable for general workshop use? Yes — a 0–200 mm measuring range places the caliper in the Standard category, offering a practical compromise of reach and stiffness for everyday metalworking, fixture inspection and component checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of high-resolution measurement, controlled measuring force and Industry 4.0 connectivity to ensure repeatable results on the shop floor. The built-in E‑Force 1–20 N control and the ISO 17025 calibration certificate provide traceability and reduced rework. Order the caliper directly via Metav Werkzeuge or ask the consultants for integration advice. DataMet eFORCE 1–20N Caliper 0–300 mm — 0.0005 mm resolution, Wireless & MODBUS (Microtech Metrology) DataMet eFORCE 1–20N is an Industry 4.0-ready digital caliper designed for high-precision shop-floor measurement and automated data collection in production environments. Swiss reading system 0.0005 mm resolution E‑Force 1–20 N with force control Wireless, USB and MODBUS data transfer Precise readout and dependable measurement consistency The instrument combines a Swiss reading system with a selectable 0.0005 mm display step, allowing display granularity down to sub-micron levels while preserving a practical selection of 0.001 / 0.01 / 0.1 mm steps for different workflows. This distinction between display resolution and overall measurement uncertainty is essential: fine resolution helps detect small changes, while the specified accuracy (data: 0.008 mm) defines the limit for reproducible results. As a result, the caliper is suited for tasks that demand meticulous control over dimensional tolerances without sacrificing everyday usability in quality control and workshop measurement. Seamless data flow to quality systems and SPC Equipped with the MICS 2.0” colour touchscreen and multiple transfer modes, the device supports modern data handling: Wireless transfer to the MDS app, Wireless HID, USB HID and industrial MODBUS RTU (RS‑485) for machine-level integration. Optional MODBUS ASCII or MODBUS TCP/IP are available on request. These connectivity options enable direct logging to SPC and MES systems, reduce manual transcription errors and streamline batch traceability. The caliper therefore functions as a practical sensor in digital workflows, simplifying reporting and statistical evaluation. Built-in force management to cut operator variability The integrated E‑Force control module lets operators set measuring force between 1–20 N, use an AUTO‑Force mode, and view force indication via the display. Consistent contact pressure removes a common source of measurement scatter, improving repeatability across different users and shifts. The unit also includes a memory manager with capacity for 2,000 values, a folder system and a statistics mode, making it straightforward to record sample sets and retrieve measurement series for immediate analysis without dependence on external logging devices. Workshop-oriented design with certified calibration Classified as a Standard caliper (measuring range up to 300 mm), the instrument balances reach and stiffness for routine machine‑shop and metalworking tasks; the jaw geometry (data: 60/20 mm) supports interior and exterior measures while remaining simple to handle. Delivery includes the measuring tool, free versions of the MDS app, USB data/charging cable, a calibration protocol and ModBus RTU support. A formal ISO 17025 calibration certificate (Ilac MRA) is supplied, giving documented traceability for inspection routines and audit requirements—an advantage for regulated production and contract measurement. Discuss integration options for the Microtech Metrology DataMet eFORCE — contact Metav Werkzeuge in Emmerich for technical consultation and prompt supply coordination. Technical data Article number: 141088030M Manufacturer: Microtech Metrology Delivery set: Messwerkzeug; Free versions of MDS App; USB data/charging cable; Calibration protocol; ModBus RTU Core specifications Measuring range: 0–300 mm Resolution options: 0.0005 / 0.001 / 0.01 / 0.1 mm Accuracy: 0.008 mm Force range: 1–20 N Memory capacity: 2000 values Jaw length: 60/20 mm Features and interfaces Industry 4.0 adopted E‑Force caliper with MICS system and 2.0" colour touchscreen Swiss made reading system resolution 0.0005 micron (selectable) Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution select, Connection indication E‑Force module with force selection, AUTO‑Force mode and force indication Memory manager with folders and statistics mode; memory data transfer Wireless to MDS app (Windows, Android, iOS, macOS) Wireless HID, Wireless HID+MAC, USB HID MODBUS RTU data output (RS‑485, 4‑wire); MODBUS ASCII / MODBUS TCP/IP option on request Calibration certificate included (ISO 17025, Ilac MRA) FAQ What level of resolution and accuracy does this caliper offer? The DataMet eFORCE delivers a display resolution down to 0.0005 mm with selectable steps; the specified measurement accuracy in the data is 0.008 mm, which defines its reproducible tolerance for standard workshop use. Can the caliper be integrated into an existing SPC or MES system? Yes. The DataMet eFORCE supports Wireless transfer to the MDS app, USB HID and MODBUS RTU (RS‑485); MODBUS ASCII and MODBUS TCP/IP are available on request for direct MES or PLC integration. How does the E‑Force module improve measurement repeatability? E‑Force provides controlled measuring pressure from 1–20 N, an AUTO‑Force mode and on‑screen force indication; these functions reduce variability caused by differing operator pressure and yield more consistent results when using the caliper. Is a traceable calibration certificate supplied with the instrument? A calibration protocol is included with the delivery set and the instrument is supplied with an ISO 17025 calibration certificate (Ilac MRA), providing traceability suitable for audits and quality management. What types of measurements are supported and is the range suitable for workshop use? The caliper covers 0–300 mm and is classified as a Standard measuring range, making it appropriate for common machine‑shop, metalworking and quality‑control tasks where a balance of reach and stiffness is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools