Mikroskopie für Profis, Fortgeschrittene und Einsteiger
Benefitting from a compact fit and clear optical performance, the 2.0× attachment lens delivers an immediate extension of inspection capability while preserving the ergonomic advantages of stereo optics; combine the 2.0× magnification with the Ø48 mounting to speed up visual checks and reduce objective changes. Order directly via Metav Werkzeuge or consult our specialists for compatibility advice. Attachment lens W2.0 – 2.0× optical accessory, Ø48 mount (Metav IndustryLine) The Attachment lens W2.0 is a precision optical accessory that increases the magnification of stereo microscopes by 2.0×, designed for use with Ø48 mm objective mounts and routine visual inspection tasks. 2.0× magnification factor Ø48 mm mount diameter Designed for stereo microscopes Compact optical enhancement Greater inspection reach without swapping objectives The 2.0× optical booster extends the usable magnification range of existing microscopes, enabling quicker transition between overview and detail inspection without frequent objective changes. By acting as an intermediate optical element, this attachment lens multiplies the effective magnification of the microscope’s objective while keeping the original optical axis and working distance largely intact. The result is a measurable gain in inspection throughput and fewer handling steps during quality control, which supports faster decision cycles on the shop floor. The compact Ø48 interface keeps the installation simple and repeatable. Practical compatibility and workflow advantages Engineered for integration with standard stereo systems, the W2.0 attachment lens fits into common optical trains and preserves the microscope’s ergonomic layout. This accessory is particularly useful where rapid alternation between magnification levels is required—inspection benches, incoming goods control and assembly verification benefit from the doubled visual resolution. The accessory’s construction supports stable alignment, which reduces adjustment time and ensures reproducible views across multiple operators. For specific system compatibility and to verify mechanical fit, Metav Werkzeuge can provide application guidance and parts matching. Confidence through tested optics and trusted supply The optical design focuses on delivering clear, contrast-rich images for routine and precision inspection alike, helping to avoid misinterpretation of small features. Supplied by Metav IndustryLine and distributed from Emmerich, this attachment lens is part of a range that embodies Metav’s commitment to making precision accessible: a broad product spectrum, a rigorous quality filter and dependable logistics for industry and trade. The combination of a defined magnification gain and a standard Ø48 mount offers a practical, low-risk upgrade path for laboratories and workshops seeking improved visual performance without major system overhaul. Request tailored compatibility advice from Metav Werkzeuge for the W2.0 attachment lens and secure prompt delivery from Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.242.4 GTIN: 4054469145228 Customs tariff number: 90119090 Data Magnification: 2.0× Mount diameter: Ø48 mm Weight: 6.15 kg Type designation: W2.0 Special features Category: Optik Suitable for: stereo microscopes SKU: M503.242.4 FAQ How does the attachment lens affect the microscope’s magnification? The attachment lens multiplies the microscope objective’s magnification by 2.0×, turning an existing magnification into twice its value without replacing objectives. Will the lens fit my stereo microscope? Compatibility depends on the objective mount; the accessory uses an Ø48 mm interface common to many stereo systems. Metav Werkzeuge can confirm fitment for specific microscope models. Does the W2.0 attachment lens change the working distance? Introducing an attachment element can alter the effective working distance slightly; the design of the W2.0 aims to preserve practical working distances for inspection tasks, minimising adjustments needed. Is the accessory suitable for laboratory and workshop use? Yes. The optical booster is designed for routine inspection and laboratory visual checks, improving detail recognition while remaining straightforward to integrate into established workflows. What identification numbers are available for ordering and inventory? The product is listed under SKU M503.242.4 and GTIN 4054469145228 for ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Taking advantage of a 60 mm lens and 5× magnification ensures dependable close-up inspection with a comfortable working distance, while the robust metal frame keeps the tool aligned during repeated checks; order the magnifier directly via Metav Werkzeuge or consult our technical advisers for specification support. Metav IndustryLine Hand magnifier M503.131 — 60 mm lens, 5× magnification A compact inspection tool, the Hand magnifier M503.131 is designed for precise visual checks in workshops, inspection benches and quality-control stations. 60 mm glass lens for clear magnification 5× magnification for detailed inspection Metal frame for robust workshop use Wide, clear view for faster defect detection The large 60 mm lens offers a broader field of view than smaller hand lenses, making it easier to scan surfaces and components without constant repositioning. With 5× magnification, small features such as fine threads, solder joints or print defects become visibly distinct while retaining a practical working distance. This balance between magnification and field size improves inspection throughput and reduces the need for repeated handling, contributing to a more efficient quality routine and fewer reworks. Durable design that keeps measurements repeatable A metal frame provides structural stability and resists everyday workshop wear, which helps maintain optical alignment over time. At approximately 0.1 kg, the device is notably lightweight, reducing operator fatigue during prolonged use and allowing for precise manual guidance. The construction supports routine visual inspection tasks where a stable hand lens is required, ensuring consistent observation quality across multiple shifts and operators. Practical use cases and integration into the workflow The magnifier is suited to electronics assembly, watch and jewellery inspection, prototyping and general workshop QC where a portable optical aid accelerates decision-making. As a straightforward inspection accessory, it complements microscopes and measuring tools by offering immediate, handheld visual verification. The product’s simple concept delivers a pragmatic increase in detection capability without introducing complex calibration procedures or lengthy setup routines. For clear, dependable visual checks, order the Metav IndustryLine Hand magnifier M503.131 from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice. Technical Data SKU: M503.131 GTIN: 4054469144627 ECLASS: 21170614 Tariff number: 90138090 Facts Lens diameter: 60 mm Magnification: 5× (5 dioptre) Weight: 0.1 kg Special features Material: metal frame Category: Optik Compact, handheld design FAQ What magnification does the lens provide? The Hand magnifier M503.131 provides 5× magnification (5 dioptre), suitable for detailed visual inspection while maintaining a usable working distance. Is the lens diameter suitable for scanning larger areas? Yes, the 60 mm lens offers a wider field of view than smaller hand lenses, making surface scanning and component checks quicker and less fiddly. Can the magnifier withstand workshop use? The device features a metal frame, which enhances robustness and helps maintain optical alignment under regular workshop conditions. Is the magnifier suitable for electronics inspection? The Hand magnifier M503.131 is well suited to electronics assembly and solder-joint inspection, providing clear enlargement for visual verification tasks. Does the product include any calibration certificate? No calibration certificate is indicated for this optical magnifier; it is a ready-to-use inspection tool intended for visual checks and not for calibrated dimensional measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of a compact inspection solution that combines 3× magnification, a Ø75 mm lens and a robust metal frame for reliable visual checks and quality control. Order directly via Metav Werkzeuge or request advice from our consultants to ensure the right optics for the task. Hand magnifier M503.132 – 75 mm Ø lens, 3× magnification (Metav IndustryLine) The Hand magnifier M503.132 is a compact inspection lens designed for close visual work and quality checks across electronics, watchmaking and general workshop use. Ø75 mm lens for wide field of view 3× magnification for clear detail enlargement Metal frame for durable, workshop-ready handling Extremely lightweight at approx. 0.1 kg Clear, measurable enlargement for efficient inspection The large 75 mm lens delivers a broad viewing area while the 3× magnification provides a practical enlargement that speeds up routine inspections without excessive image distortion. For production and quality-control tasks, this combination reduces the need for repeated handling and supports faster decision-making at the workstation. The optical design focuses on even illumination and a stable focal distance, helping to maintain consistent results when examining serial numbers, circuit traces or fine mechanical parts. Durable construction that stands up to daily use A metal frame gives the instrument a solid feel and improves resilience against knocks and frequent handling compared with plastic-bodied alternatives. Weighing around 0.1 kg, the tool remains comfortably portable and easy to manoeuvre for prolonged use, while the metal surround ensures the lens stays securely seated. This balance of durability and low weight supports repetitive inspection cycles in workshops and inspection benches, making the lens a dependable tool for routine tasks. Practical handling, storage and application benefits The magnifier’s combination of a wide lens and modest magnification makes it versatile for both detailed inspection and general visual assistance. Its compact footprint and light mass simplify storage and transport between workstations or on-site checks. Suitable applications include electronics inspection, watch and jewellery repair, print and label verification, and any small-part quality control where clear, repeatable visual assessment is required. The design minimises operator fatigue and supports consistent inspection throughput. For reliable workshop optics from Metav IndustryLine, contact Metav Werkzeuge to discuss the M503.132 with its Ø75 mm lens and 3× magnification and to arrange delivery from our Emmerich facility Technical data SKU: M503.132 GTIN: 4054469144634 Customs tariff number: 90138090 Facts Lens diameter: Ø75 mm Magnification: 3× (3 dioptres) Weight: 0.1 kg Materials & features Frame: metal Category: Optics eCl@ss: 21170614 FAQ What level of magnification does the magnifier provide? The hand magnifier offers 3× magnification, which is suitable for general inspection tasks and detailed visual checks. Is the lens suitable for electronics and watchmaking inspections? Yes, the combination of a Ø75 mm lens and 3× enlargement makes the device well suited to electronics, watchmaking and similar precision inspection tasks. How heavy is the instrument and is it comfortable to hold? The magnifier weighs approximately 0.1 kg, delivering a light, well-balanced feel that reduces fatigue during repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Choose the combination of interchangeable screw-on heads and Ø9.0 mm cable compatibility for flexible, precise inspections; order the accessory directly via Metav Werkzeuge or ask our consultants for configuration support. Accessory for photo-video endoscope M503.179.2 — interchangeable heads, Ø9.0 mm cable compatibility (Metav IndustryLine) The Accessory for photo-video endoscope M503.179.2 is a modular adapter set that equips camera heads with screw-on ring, magnet, hook or 90° mirror attachments for expanded inspection capability. Screw-on ring, magnet, hook and 90° mirror heads Compatible with Ø9.0 mm inspection cable Secure mounting to standard camera heads Adaptable heads that expand inspection capability The set provides four purpose-built attachments that screw directly onto the camera head, enabling quick swaps between a ring LED, magnet pick-up, small hook and a 90° mirror. This modular approach reduces tool changes and minimises downtime during detailed inspections of pipes, boreholes or machinery cavities. The ability to replace an optical head with a functional tool head on the fly supports efficient fault finding and keeps inspection cycles short while preserving image access in confined or awkward geometries. Engineered compatibility and secure mounting Designed for systems with a camera cable of Ø9.0 mm, the adapter ensures a tight, repeatable fit on compatible camera heads. The screw-on interface is engineered for reliable retention during manoeuvring and retrieval operations, decreasing the risk of accidental detachment. The modular heads also allow the visual inspection system to be repurposed for light handling or directional viewing without additional tooling, improving workflow flexibility across maintenance, quality control and assembly tasks. Practical benefits for workshop and field inspections By combining simple mechanical interfaces with functional attachment options, this accessory set elevates an imaging tool into a versatile inspection companion. The 90° mirror permits side-view inspections without repositioning large assemblies; the magnet facilitates recovery of small ferrous debris; the hook assists in positioning or retrieving items; the ring attachment helps diffuse illumination for shadow-free imaging. These targeted utilities translate into fewer secondary operations, shorter inspection times and more reliable diagnostic outcomes for production and service teams. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine accessory M503.179.2 can be prepared for specific inspection needs — our Emmerich-based specialists will advise on fittings and compatibility Technical data SKU: M503.179.2 GTIN: 4054469167862 eClass: 34590192 Customs tariff number: 85229080 Facts Compatible cable diameter: Ø9.0 mm Category: Optik Type designation: 1+2+3+4 Special features Screw-on attachments: ring, magnet, hook, 90° mirror Attaches to camera head for inspection applications Suitable for photo-video endoscope workflows FAQ Which attachments are included with the accessory? The Accessory for photo-video endoscope M503.179.2 from Metav IndustryLine includes screw-on ring, magnet, hook and a 90° mirror head for versatile inspection tasks. Is this accessory compatible with my inspection camera cable? Compatibility is provided for camera cables with a diameter of Ø9.0 mm; the M503.179.2 is designed to fit standard camera heads that accept screw-on tooling. Can the 90° mirror be used for side-view inspections in narrow bores? Yes, the 90° mirror attachment on the Metav IndustryLine accessory M503.179.2 is intended to deliver side-view capability without repositioning large components. Is the magnet head suitable for recovery of small ferrous parts? The magnet head included with M503.179.2 is designed for retrieval of small ferrous debris encountered during inspections, improving recovery chances without additional tools. How is the accessory attached and removed from the camera head? All heads are screw-on type fittings that mount directly to the camera head, providing a secure, repeatable connection for inspection and retrieval operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com