Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Take advantage of a compact inspection solution that combines 3× magnification, a Ø75 mm lens and a robust metal frame for reliable visual checks and quality control. Order directly via Metav Werkzeuge or request advice from our consultants to ensure the right optics for the task. Hand magnifier M503.132 – 75 mm Ø lens, 3× magnification (Metav IndustryLine) The Hand magnifier M503.132 is a compact inspection lens designed for close visual work and quality checks across electronics, watchmaking and general workshop use. Ø75 mm lens for wide field of view 3× magnification for clear detail enlargement Metal frame for durable, workshop-ready handling Extremely lightweight at approx. 0.1 kg Clear, measurable enlargement for efficient inspection The large 75 mm lens delivers a broad viewing area while the 3× magnification provides a practical enlargement that speeds up routine inspections without excessive image distortion. For production and quality-control tasks, this combination reduces the need for repeated handling and supports faster decision-making at the workstation. The optical design focuses on even illumination and a stable focal distance, helping to maintain consistent results when examining serial numbers, circuit traces or fine mechanical parts. Durable construction that stands up to daily use A metal frame gives the instrument a solid feel and improves resilience against knocks and frequent handling compared with plastic-bodied alternatives. Weighing around 0.1 kg, the tool remains comfortably portable and easy to manoeuvre for prolonged use, while the metal surround ensures the lens stays securely seated. This balance of durability and low weight supports repetitive inspection cycles in workshops and inspection benches, making the lens a dependable tool for routine tasks. Practical handling, storage and application benefits The magnifier’s combination of a wide lens and modest magnification makes it versatile for both detailed inspection and general visual assistance. Its compact footprint and light mass simplify storage and transport between workstations or on-site checks. Suitable applications include electronics inspection, watch and jewellery repair, print and label verification, and any small-part quality control where clear, repeatable visual assessment is required. The design minimises operator fatigue and supports consistent inspection throughput. For reliable workshop optics from Metav IndustryLine, contact Metav Werkzeuge to discuss the M503.132 with its Ø75 mm lens and 3× magnification and to arrange delivery from our Emmerich facility Technical data SKU: M503.132 GTIN: 4054469144634 Customs tariff number: 90138090 Facts Lens diameter: Ø75 mm Magnification: 3× (3 dioptres) Weight: 0.1 kg Materials & features Frame: metal Category: Optics eCl@ss: 21170614 FAQ What level of magnification does the magnifier provide? The hand magnifier offers 3× magnification, which is suitable for general inspection tasks and detailed visual checks. Is the lens suitable for electronics and watchmaking inspections? Yes, the combination of a Ø75 mm lens and 3× enlargement makes the device well suited to electronics, watchmaking and similar precision inspection tasks. How heavy is the instrument and is it comfortable to hold? The magnifier weighs approximately 0.1 kg, delivering a light, well-balanced feel that reduces fatigue during repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

A compact, single-piece optical reference with a 7 mm aperture, the Peak standard template delivers a consistent visual datum for routine inspection and alignment; order the item directly via Metav Werkzeuge or consult the team for application advice. Peak standard template — optical template with 7 mm aperture A Peak standard template for optical inspection and alignment, supplied as a single unit with a precise 7 mm aperture Precision aperture 7 mm Single unit delivery For optical inspection and alignment Consistent reference for quicker inspection decisions A calibrated aperture provides a clear, repeatable visual reference that supports faster acceptance checks and alignment tasks. The 7 mm aperture functions as a stable datum in optical workflows, reducing variability that can arise from ad hoc gauging. For production environments where visual standards must be applied repeatedly, the aperture template helps standardise inspection routines and speeds up setup and cross-checks between stations. Emphasis on a simple, unambiguous reference enhances traceability in everyday inspection tasks. Practical handling that integrates into existing processes Delivered as a single unit, the template is compact and intended for immediate use in bench-top or assembly-line checks. Its form factor simplifies storage and retrieval in common inspection kits, keeping the instrument readily accessible during short measurement cycles. The straightforward nature of the item minimises training overhead and supports lean handling practices: introduce the template into existing SOPs with minimal disturbance and maintain consistent visual criteria across operators and shifts. Supports a range of optical quality-control tasks The aperture template is suitable for routine tasks such as alignment verification, comparative visual assessment and basic lens or fixture positioning in optical assemblies. By offering a clear, repeatable aperture, the tool contributes to quality control measures without requiring specialised measuring instruments. When visual conformity and positional consistency are the objective, the template reduces ambiguous judgements and can be used in combination with microscopes, cameras or manual inspection benches as an objective reference point. Sourcing that prioritises dependable supply and industry expertise Choosing this optical template via an experienced supplier adds value beyond the item itself: consistent availability and a thoughtful product assortment simplify procurement and reduce lead-time risk. Metav’s approach to precision—combining a broad catalogue with regional fulfilment—supports continuity of supply and pragmatic purchasing for workshops and industry alike. The practical benefit is a reliable reference tool that fits into established inspection chains and contributes to steady, repeatable results on the shop floor. For standardised optical checks, request the Peak standard template (MS905.286) from Metav Werkzeuge; Metav’s team can advise on integration and availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: MS905.286 Brand: Peak Name: Peak standard template Variant: single, Ø7 mm Category: Optik Facts Diameter: 7 mm Image file size: 207200 bytes Special features Single unit delivery Optical reference template Image asset available FAQ What is the aperture size of the template? The aperture measures 7 mm and is stated on the technical data for the Peak standard template (MS905.286). How is the product supplied? The item is supplied as a single unit, indicated by the variant description for the Peak standard template. What applications suit this template? The template is intended for optical inspection tasks such as alignment checks, comparative visual assessments and basic positioning during assembly. Is the template compatible with visual inspection setups? Yes; the template serves as a repeatable visual datum and can be used alongside microscopes, cameras and bench-top inspection fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the lens‑in‑lens construction and wide Ø75 mm field of view to speed up visual inspections without frequent repositioning; the compact Ø80×170 format keeps the workbench uncluttered. Order the Peak magnifier directly via Metav Werkzeuge or consult our technical advisors for integration into production workflows. Peak 2.5–5× Magnifier MS905.214 — Lens‑in‑Lens Optics A practical magnifier for inspection and assembly tasks, the Peak 2.5–5× magnifier combines a wide viewing area with a compact housing for workshop and laboratory use Lens‑in‑lens construction for sharp detail Wide Ø75 mm viewing field for quick overview Compact Ø80×170 format for bench use Two‑step magnification 2.5× and 5× Faster inspections with clear optics The magnifier's lens‑in‑lens construction delivers a layered optical system that reduces aberrations and keeps edges crisp across the viewing area. With 2.5× as the standard setting and a secondary 5× option, the device enables both general inspection and closer examination without changing tools. The Ø75 mm viewing field (secondary Ø20 mm at higher power) cuts the need for constant repositioning, so repetitive visual checks become measurably quicker. This translates into lower cycle times in assembly and quality control routines while preserving visual comfort. Compact design that fits the workflow At Ø80×170 mm, the magnifier occupies little bench space yet offers a stable platform for handheld or clamped use. The compact format makes storage in tool trolleys straightforward and keeps the workplace organised, which supports faster throughput in production environments. The construction balances field coverage and magnification to reduce the number of device swaps during multi‑stage inspections. The simplified handling lowers the cognitive load for operators and improves consistency in routine visual tasks. Practical applications and user benefits Designed for visual inspection, assembly and maintenance, the device is suited to small parts inspection in workshops, watchmaking, electronics or quality control stations. The two magnification levels provide flexibility: use 2.5× for a quick overview of surface features and solder joints, and switch to 5× for precise examination of fine details. The clear visual advantages contribute to fewer inspection errors and faster issue detection, supporting a more reliable production flow and higher first‑pass yield. Contact Metav Werkzeuge for procurement advice on the Peak magnifier with lens‑in‑lens optics; technical consultants can advise on application fit and delivery from our Emmerich stock — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.214 Brand: Peak Designation: Peak magnifier 2.5–5× Facts Dimensions: Ø80 x 170 mm Viewing field: Ø75 mm (Ø20 mm) Diameter: 75 mm Magnification: 2.5× (5×) Special features Lens‑in‑lens construction Category: Optics Compact format for bench and trolley use FAQ What magnification levels does the magnifier offer? The Peak magnifier provides 2.5× as the main magnification with a secondary 5× option for close inspection of fine detail. How large is the usable viewing area? The device delivers a wide Ø75 mm viewing field for overview inspections and a reduced Ø20 mm field at the higher magnification setting. Is the magnifier suitable for industrial inspection tasks? Yes, the optical design and compact format make the Peak magnifier suitable for workshop and quality control applications where rapid, repeatable visual checks are required. Can this magnifier replace a microscope for routine checks? For quick visual checks and assembly inspections the magnifier offers significant speed and convenience; it is not intended to replace microscopes for extreme high‑magnification analysis. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact optical performance and easy handling of this monocular: the combination of 2x magnification and a Ø8 mm lens ensures quick visual checks with a clear field of view, while Metav Werkzeuge provides reliable supply and technical advice for seamless integration into workshop workflows. Peak monocular telescope MS905.207 — 2x magnification, Ø8 mm lens Peak monocular MS905.207 is a compact inspection telescope designed for quick visual checks in workshops, field inspections and quality control tasks Peak monocular MS905.207 with 2x magnification Ø8 mm lens for compact optical design Field of view 12Ø/mm and 192Ø/m Clear results for fast inspection and control The 2x magnification combined with the Ø8 mm lens provides a direct, undistorted view that is ideal for rapid visual assessment. The stated field of view (12Ø/mm and 192Ø/m) translates into a wide observable area at low magnification, reducing the need to reframe the target repeatedly. For technical users, this means fewer interruptions during routine checks and a more efficient inspection process. The instrument’s optical arrangement focuses on contrast and clarity rather than high magnification, which benefits applications where context and surrounding detail are as important as close detail. Compact handling suited to workshop and on-site tasks With overall dimensions of Ø22.5 x 50 mm, the instrument is small enough for one-handed use and fits comfortably in a pocket or tool pouch. The modest 11 viewing angle supports a natural hand posture, reducing strain during repeated use. A near-focus point of 100 enables closer visual work than typical low-power optics, making small components easier to examine without additional equipment. The compact design is especially helpful when space is limited or when rapid transitions between inspection points are required. Practical use cases and professional relevance The monocular is particularly suitable for technicians, maintenance personnel and quality inspectors who need a portable optical aid for assembly checks, surface inspections and quick alignment tasks. Its low magnification keeps orientation and spatial relationships intact, which is useful when evaluating fit, surface defects or thread engagement. The instrument complements a set of precision tools by providing an immediate visual reference without the setup time of larger optical devices. Supply assurance and easy integration into workflows Sourcing this monocular through Metav Werkzeuge brings the benefit of a robust European supply chain and long-term availability. Metav’s experience in precision measurement and workshop equipment ensures that components arrive reliably and are supported by clear information and expert advice. For procurement teams, the compact optical tool offers an uncomplicated addition to standard inspection kits and reduces the need to consult multiple suppliers for small but essential visual aids. Contact Metav Werkzeuge for tailored advice on integrating the Peak MS905.207 into workshop inspection routines and to confirm availability for your next order Technical Data Article number: MS905.207 Product: Peak monocular telescope Brand: Peak Lens diameter: Ø8 mm Magnification: 2x Dimensions: Ø22.5 x 50 mm Field of view: 12Ø/mm and 192Ø/m Viewing angle: 11 Near focus: 100 Category: Optik Facts Magnification: 2x Lens diameter: 8 mm Dimensions (Ø x L): Ø22.5 x 50 mm Field of view specification: 12Ø/mm and 192Ø/m Viewing angle value: 11 Near-focus value: 100 Features Monocular telescope for handheld inspection SKU: MS905.207 Portable, compact design Intended for workshop and field visual checks FAQ What magnification does this monocular offer? The Peak monocular MS905.207 provides a 2x magnification level, designed for quick overview inspections and context-rich observation. How wide is the instrument’s viewing area? The optical specification for the instrument lists a field of view of 12Ø/mm and 192Ø/m, which indicates a broad observable area at the stated magnification. Is the monocular suitable for close-up checks? Yes; the Peak MS905.207 has a near-focus value of 100, enabling closer visual inspection than many low-power optics. What makes the MS905.207 practical for workshop use? Its compact dimensions (Ø22.5 x 50 mm) and ergonomic viewing arrangement allow easy one-handed operation and quick transitions between inspection points, making it well suited to maintenance and assembly tasks. Is this instrument portable for field inspections? The small form factor of the Peak monocular MS905.207 supports pocket carry and rapid deployment in field and site environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Choose the combination of interchangeable screw-on heads and Ø9.0 mm cable compatibility for flexible, precise inspections; order the accessory directly via Metav Werkzeuge or ask our consultants for configuration support. Accessory for photo-video endoscope M503.179.2 — interchangeable heads, Ø9.0 mm cable compatibility (Metav IndustryLine) The Accessory for photo-video endoscope M503.179.2 is a modular adapter set that equips camera heads with screw-on ring, magnet, hook or 90° mirror attachments for expanded inspection capability. Screw-on ring, magnet, hook and 90° mirror heads Compatible with Ø9.0 mm inspection cable Secure mounting to standard camera heads Adaptable heads that expand inspection capability The set provides four purpose-built attachments that screw directly onto the camera head, enabling quick swaps between a ring LED, magnet pick-up, small hook and a 90° mirror. This modular approach reduces tool changes and minimises downtime during detailed inspections of pipes, boreholes or machinery cavities. The ability to replace an optical head with a functional tool head on the fly supports efficient fault finding and keeps inspection cycles short while preserving image access in confined or awkward geometries. Engineered compatibility and secure mounting Designed for systems with a camera cable of Ø9.0 mm, the adapter ensures a tight, repeatable fit on compatible camera heads. The screw-on interface is engineered for reliable retention during manoeuvring and retrieval operations, decreasing the risk of accidental detachment. The modular heads also allow the visual inspection system to be repurposed for light handling or directional viewing without additional tooling, improving workflow flexibility across maintenance, quality control and assembly tasks. Practical benefits for workshop and field inspections By combining simple mechanical interfaces with functional attachment options, this accessory set elevates an imaging tool into a versatile inspection companion. The 90° mirror permits side-view inspections without repositioning large assemblies; the magnet facilitates recovery of small ferrous debris; the hook assists in positioning or retrieving items; the ring attachment helps diffuse illumination for shadow-free imaging. These targeted utilities translate into fewer secondary operations, shorter inspection times and more reliable diagnostic outcomes for production and service teams. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine accessory M503.179.2 can be prepared for specific inspection needs — our Emmerich-based specialists will advise on fittings and compatibility Technical data SKU: M503.179.2 GTIN: 4054469167862 eClass: 34590192 Customs tariff number: 85229080 Facts Compatible cable diameter: Ø9.0 mm Category: Optik Type designation: 1+2+3+4 Special features Screw-on attachments: ring, magnet, hook, 90° mirror Attaches to camera head for inspection applications Suitable for photo-video endoscope workflows FAQ Which attachments are included with the accessory? The Accessory for photo-video endoscope M503.179.2 from Metav IndustryLine includes screw-on ring, magnet, hook and a 90° mirror head for versatile inspection tasks. Is this accessory compatible with my inspection camera cable? Compatibility is provided for camera cables with a diameter of Ø9.0 mm; the M503.179.2 is designed to fit standard camera heads that accept screw-on tooling. Can the 90° mirror be used for side-view inspections in narrow bores? Yes, the 90° mirror attachment on the Metav IndustryLine accessory M503.179.2 is intended to deliver side-view capability without repositioning large components. Is the magnet head suitable for recovery of small ferrous parts? The magnet head included with M503.179.2 is designed for retrieval of small ferrous debris encountered during inspections, improving recovery chances without additional tools. How is the accessory attached and removed from the camera head? All heads are screw-on type fittings that mount directly to the camera head, providing a secure, repeatable connection for inspection and retrieval operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com