Mikroskopie für Profis, Fortgeschrittene und Einsteiger
0,7x... 4,5x SLX-4 Binocular stereozoom microscope
0,7x...4,5x SLX-2 Cordless binocular stereozoom
0,7x...4,5x SLX-3 Cordless trinocular stereozoom microscope
0,7x...4,5x SLX-5 Trinocular stereozoom microscope
Take advantage of a compact optical accessory that halves the original magnification while widening the field of view, ideal for faster visual inspections and documentation. The DH-W0.5 attachment lens combines simple integration with video microscopes and reliable identification (SKU M503.255.1) — order directly via Metav Werkzeuge or consult our specialists for system matching. DH-W0.5 Attachment Lens (0.5×) for Video Microscopes — Metav IndustryLine A DH-W0.5 attachment lens designed to reduce magnification and expand the visible area on compatible video microscopes for inspection and imaging tasks 0.5× magnification for wider overview Increases field of view for inspection tasks Compatible with standard video microscopes Faster inspections through a broader field of view The 0.5× factor reduces the effective magnification, which directly increases the field of view and typically improves the apparent depth of field compared with higher-power objectives. This change makes it easier to inspect larger structures, locate areas of interest quickly and reduce the number of repositionings during routine checks. In practical terms, the accessory shortens cycle times in visual quality control and speeds up preparatory steps for documentation without changing the camera or sensor. Simple integration that keeps throughput high As an attachment lens for video microscopes, the unit is intended to be fitted to compatible optical heads where a wider overview is required. By adapting the system’s magnification rather than swapping multiple objectives, overall throughput benefits from fewer handling steps and faster set-up. The mechanical and optical function aims to preserve image clarity while delivering a broader image circle, enabling repeatable imaging for batch inspection and process documentation. Practical benefits for workshop and laboratory workflows This optical accessory supports common inspection and documentation workflows by offering a reliable method to alter overall system magnification without additional camera changes. The design focuses on quick changeover between close-up work and overview imaging, making it a useful complement in production lines, R&D benches and service departments that require both detail and context in a single system. Identified as SKU M503.255.1, the component serves as a compact, flexible tool for everyday optical tasks. For tailored advice on integrating the Metav IndustryLine DH-W0.5 attachment lens into inspection systems or for procurement, please contact Metav Werkzeuge — our consultants will help match the accessory to the existing setup. Technical Data Article number: M503.255.1 GTIN: 4054469145372 Type: DH-W0.5 Magnification: 0.5× Tariff number: 90119090 Data Magnification factor: 0.5× GTIN numeric: 4054469145372 Tariff numeric: 90119090 Special features Accessory for video microscopes Expands system magnification range Category: Optik Asset image available (m5032551-main.jpg) FAQ What effect does a 0.5× attachment lens have on imaging? A 0.5× attachment lens halves the effective magnification and increases the field of view, making it easier to see larger areas while maintaining sufficient detail for many inspection tasks. Is the DH-W0.5 compatible with all video microscopes? Compatibility depends on the optical mount and system geometry; the DH-W0.5 is designed for use with compatible video microscope heads — consult system specifications or Metav Werkzeuge for confirmation. Will image quality suffer when using the attachment lens? The accessory is intended to preserve image clarity while widening the view; system performance can vary with sensor size and objective combination, so final image quality should be verified on the specific setup. Can the attachment lens be used for documentation and measurement images? Yes; by widening the visible area the lens facilitates overview images for documentation. For metrological measurements, ensure the optical chain meets the required calibration and resolution standards. Which identifier should be quoted when enquiring about this accessory? Please quote SKU M503.255.1 and the type DH-W0.5 when requesting information or compatibility checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of the combination of flexible magnification, a dedicated imaging port and delivered eyepieces for reliable inspection and documentation in lab and teaching environments. Order the head directly via Metav Werkzeuge or ask our consultants if guidance on mounting or compatibility is required. NexiusZoom NZ.5303 trinocular microscope head — 0.67–4.5× zoom, without head holder (Euromex) The NexiusZoom NZ.5303 is a trinocular microscope head designed for variable observation and digital imaging, suitable for laboratory, teaching and inspection applications; the head holder is supplied separately. Trinocular head for simultaneous observation and imaging Zoom range 0.67–4.5× for variable magnification Delivered with eyepieces; head holder not included Compatible with NexiusZoom series models Flexible magnification for varied inspection tasks The NexiusZoom NZ.5303 trinocular head provides a continuous 0.67–4.5× zoom that enables fast transitions between wide-field overview and close-up inspection without the need to change objectives. This fluid zoom control supports efficient workflows in quality assurance and routine inspections by reducing handling time and minimising the risk of misalignment. The trinocular configuration preserves comfortable binocular viewing while offering a separate channel for cameras, which keeps observation and documentation processes parallel and time-efficient. Built for imaging and reliable documentation A dedicated third port permits camera attachment for direct capture of stills or video, which simplifies traceable documentation and reporting. The unit is supplied with eyepieces, ready for visual work, while the head holder must be sourced separately to match the chosen microscope stand. Compatibility within the NexiusZoom series allows standardised equipment layouts across multiple benches or classrooms, reducing training overhead and spare-part variety. Stable optical alignment during camera use reduces retakes and improves image consistency for inspection protocols. Practical integration and application guidance The head requires a suitable mount because the head holder is not included; this modular approach enables selection of the correct adapter for specific microscope bases and accessories. Compatibility with existing NexiusZoom components minimises mechanical modifications and supports quick interchange between stands. Typical applications include laboratory inspection, materials analysis, educational demonstrations and R&D documentation. If confirmation of fit or recommendations for a matching mount is required, Metav's technical advisers can assist with compatibility checks and accessory selection to ensure consistent optical performance. For precise imaging and straightforward integration with existing NexiusZoom systems, contact Metav Werkzeuge for expert advice and order processing from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: NZ.5303 Product label: Trinocular NexiusZoom head with zoom 0.67–4.5×, without head holder Product type: Microscope head Model series: NexiusZoom Manufacturer: Euromex Core specifications Zoom minimum: 0.67× Zoom maximum: 4.5× SKU: NZ.5303 Features and compatibility Trinocular configuration Supplied with eyepieces Head holder not included Compatible with NexiusZoom series Related SKUs: NZ.6010; NZ.6010-C; NZ.6010-CM; NZ.6015; NZ.6020; NZ.6020-CM; NZ.6099; NZ.9081; NZ.9090; NZ.9095; NZ.9850 FAQ Is a camera mount included with the head? The head is delivered with eyepieces but the head holder is not included; camera attachment uses the dedicated trinocular port and a suitable mount must be selected separately. Can this head be used on other NexiusZoom microscopes? Yes, the head is compatible with the NexiusZoom series and is intended for integration into matching NexiusZoom microscope systems. What magnification coverage does the zoom provide? The zoom covers a continuous 0.67–4.5× range, enabling transitions from overview to detailed inspection without changing objectives. Are eyepieces included in the delivery? The delivery includes the microscope head with eyepieces; the head holder is not part of the scope of delivery. Which applications suit this trinocular head best? Typical uses include laboratory inspection, teaching, quality control and R&D documentation where simultaneous observation and image capture are required. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of the combination of a wide 0.75x–5x zoom, an adjustable LED for both reflected and transmitted illumination and a compact, stable stand to speed up routine inspections and documentation. Order the Mono Video Zoom directly via Metav Werkzeuge or ask the consultants for application advice. Mono Video Zoom ZDH0850+SD18-D — mono video zoom head with adjustable LED, 0.75x–5x, Metav IndustryLine The Mono Video Zoom is a mono video zoom head supplied with a stable stand and a regulable LED illumination system for both reflected and transmitted light, designed for quality control, electronics inspection and microassembly documentation. Adjustable LED for reflected and transmitted light 0.75x–5x zoom range for versatile inspection Stable 292×283 mm base for repeatable positioning Integrated 3 W illumination for consistent brightness Precise visual inspection across a broad magnification range The video zoom head provides a 0.75x–5x zoom that covers tasks from coarse alignment to detailed inspection without frequent objective changes. This range reduces setup time and minimises handling of delicate components, enabling faster throughput in inspection stations. The optical design supports clear video documentation, so defects and features are captured reliably for traceability and reporting. The compact zoom head keeps the optical axis stable, which benefits repeatability in quality-control routines and in-line sample checks. Illumination that adapts to different sample types The built-in, adjustable LED lighting supports both reflected and transmitted light modes, offering flexible contrast control for plastics, foils, PCBs and thin specimens. The 3 W illumination delivers steady light output while keeping thermal influence low, which is important for temperature-sensitive materials. Fine-tuning the light intensity and direction improves defect visibility and reduces the need for external illumination rigs, simplifying workstations and saving bench space. Stable support for reproducible measurements and handling A thoughtfully dimensioned support system ensures practical stability: the 292×283 mm base combined with a Ø25×240 mm column provides a robust foundation that keeps the optical head rigid during adjustments. This mechanical stability is crucial when performing routine inspections or capturing sequence images, as it reduces motion artefacts and the need for repeated focusing. The overall footprint balances rigidity with a small bench presence, making the unit suitable for compact production lines and laboratory benches. Designed for smooth workflow and reliable documentation Integration with video capture and inspection setups is straightforward thanks to the mono video head's form factor and mounting compatibility. The head is particularly suitable where visual logging and repeatable checks are required, such as incoming inspection, final assembly checks and microfabrication quality control. Backed by Metav’s focus on making precision accessible, the system supports dependable daily use in industrial and craft workshops, helping to standardise inspection routines and improve process transparency. For tailored advice or to arrange procurement through Metav Werkzeuge, please contact the Metav consultants who can recommend the ideal configuration for specific inspection tasks. Technical data Article number: M503.221.1 GTIN: 4054469145006 Model / Type: ZDH0850+SD18-D Brand: Metav IndustryLine Facts Magnification: 0.75x–5x Illumination power: 3 W Base footprint: 292×283 mm Column: Ø25×240 mm Special features Mono video zoom head Stand included Regulable LED for reflected and transmitted light Category: Optics Image asset available (product photo) FAQ What magnification range does the head cover? The Mono Video Zoom offers a 0.75x–5x zoom range, suitable for both coarse alignment and detailed inspection tasks. Is the illumination suitable for transparent samples? Yes. The integrated, regulable LED supports transmitted light, making the system suitable for thin or semi-transparent specimens as well as reflected-light inspection. What is the footprint required for the unit on a workbench? The stand requires a 292×283 mm footprint and uses a Ø25×240 mm column, providing a stable base for routine inspection and image capture. Which applications is this video zoom head designed for? Typical uses include electronics inspection, quality control, microassembly checks and documentation tasks where repeatable visual records are needed. Does the package include a stand and illumination? Yes, the delivery includes the stand and the integrated regulable LED illumination for reflected and transmitted lighting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Benefit from an infinity-corrected optical system, high-resolution imaging and a wide 0.75x–5x zoom range for precise inspection and measurement tasks; these features improve image fidelity and reduce setup time. Order the Mono Video Zoom directly via Metav Werkzeuge or contact our consultants for tailored application advice. Mono Video Zoom — Video zoom lens with infinity-corrected optics and high-resolution imaging The Mono Video Zoom is a compact video zoom lens designed for visual inspection and measurement in electronics, semiconductor and LED production, delivering an infinity-corrected optical path and high-resolution images for reproducible results. Infinity-corrected optical system High-resolution imaging 0.75x–5x zoom range Designed for electronics inspection Precise visual inspection made reproducible The infinity-corrected design ensures that the optical path beyond the objective remains parallel, which simplifies integration with cameras and measuring systems and reduces image aberrations. With its infinity-corrected optical system and high-resolution performance, the lens produces stable, high-contrast images that enable more reliable defect detection and dimensional checks. For quality control, this translates into fewer false rejects and faster decision cycles, since images remain consistent across different camera set-ups and magnification steps. Practical advantages for process control and assembly inspection A wide 0.75x–5x zoom range provides flexible working distances and field-of-view adjustment without frequent lens changes, supporting tasks from coarse alignment to close-up inspection. This variability reduces handling time and increases throughput on inspection stations. The optical construction is optimised for clear edge definition, which helps metrology software and manual operators to obtain repeatable measurements, improving traceability in production environments such as semiconductor wafer inspection and LED module testing. Integration and application clarity for production environments Engineered for machine-vision and laboratory use, the lens is compatible with common imaging chains and adapts easily to different camera sensors. The robust optical correction and high-resolution output reduce the need for expensive lighting adjustments, making the solution practical for both small-scale labs and inline inspection systems. By combining precision optics with straightforward adaptability, the device supports consistent measurement workflows and reduces setup complexity for inspection engineers. Contact Metav Werkzeuge for application-specific advice or to request a quotation for the infinity-corrected Mono Video Zoom ZDH0850 from Metav IndustryLine Technical Data SKU: M503.221 Type: ZDH0850 Magnification: 0.75x–5x GTIN: 4054469144993 Tariff number: 90119090 Eclass: 32130102 Facts Magnification range: 0.75×–5× GTIN numeric: 4054469144993 Tariff code: 90119090 Special features Infinity-corrected optical system High-resolution imaging Suitable for observation, control and measurement in electronics, semiconductor technology, LCE and LED applications Category: Optik FAQ What applications is this lens suited for? The Mono Video Zoom from Metav IndustryLine is suited to inspection and measurement tasks in electronics assembly, semiconductor production, LCE and LED inspection where high-resolution imaging and repeatable results are required. Can the lens be used with different camera sensors? Yes. The lens’s infinity-corrected optical design allows straightforward integration with a variety of camera sensors and imaging chains, facilitating rapid adaptation between laboratory and inline inspection systems. How does the 0.75x–5x zoom range benefit production workflows? The wide zoom range in the Mono Video Zoom enables quick field-of-view and working-distance adjustments without changing optics, reducing handling time and increasing throughput on inspection stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of the combination of flexible magnification, integrated adjustable illumination and a stable benchtop stand for fast, reproducible visual inspection and documentation. Order the unit directly via Metav Werkzeuge or contact the consultants for specification advice. Mono Video Zoom ZDM0745+SD18-D — 0.7×–4.5× zoom, adjustable LED (Metav IndustryLine) The Mono Video Zoom is a compact video zoom head with an integrated stand and adjustable LED illumination for reflected and transmitted lighting, designed for bench‑top inspection and documentation tasks. 0.7×–4.5× zoom range for flexible magnification Integrated adjustable LED for top and bottom illumination Stable Ø25×240 column with 292×283 base footprint Compact video zoom for inspection and documentation Precise, adaptable magnification for detailed inspection The Mono Video Zoom offers a magnification range of 0.7×–4.5×, combining low‑power overview and mid‑range enlargement in a single optical head. This span permits rapid switching between general assessment and closer scrutiny without changing optics, which reduces handling time during quality checks. The optical arrangement preserves image stability across the zoom band, making side‑by‑side comparisons and defect identification more efficient. Such a flexible zoom range supports both coarse sorting and focused visual verification within one workflow. Uniform illumination and stable support for reproducible results An adjustable LED system supplies both reflected (top) and transmitted (bottom) illumination, enabling contrast control for different sample types and surface finishes. The lamp runs at 3 W, delivering bright, energy‑efficient light with minimal heat load at the work area. The optical head is mounted on a stable stand with a Ø25×240 mm column and a 292×283 mm base, which reduces vibration and promotes repeatable positioning. The resulting setup helps to maintain consistent imaging conditions for routine inspections and photographic documentation. Built for inspection, documentation and compact workspaces This compact video zoom head integrates cleanly into inspection benches and small production cells, saving bench space while retaining adequate working distance and operator comfort. The design targets straightforward visual checks and documentation tasks, allowing teams to streamline routine quality assurance without complex set‑ups. As part of the Metav IndustryLine, the unit is intended to accelerate inspection throughput and reduce uncertainty in visual assessments, supporting stable process results across production and maintenance operations. Contact Metav Werkzeuge for tailored advice on the ZDM0745+SD18‑D and to confirm compatibility with existing imaging systems; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M503.220.1 GTIN: 4054469144986 Type: ZDM0745+SD18-D Name: Mono Video Zoom Category: Optik ECLASS: 32130102 TARIC: 90111090 Facts Magnification range: 0.7×–4.5× Power: 3 W Base footprint: 292×283 mm Column: Ø25×240 mm Special features Adjustable LED for reflected and transmitted illumination Compact video zoom head for inspection and documentation Stable benchtop stand included Footprint suitable for small workspaces FAQ What magnification range does the unit offer? The Mono Video Zoom covers a magnification range of 0.7×–4.5×, allowing both overview and closer inspection without changing objectives. Is the illumination suitable for both opaque and transparent samples? Yes, the adjustable LED provides reflected (top) and transmitted (bottom) illumination, making the unit suitable for a wide range of specimen types. How stable is the mounting for repetitive inspection tasks? The optical head is mounted on a Ø25×240 mm column with a 292×283 mm base, which delivers low vibration and secure positioning for repeatable inspections. Can the unit be used on a crowded bench or within a compact production cell? The compact video zoom head has a modest footprint and is designed to integrate into limited bench space while maintaining working distance for documentation work. What is the exact product type and SKU for ordering or referencing? The product is the ZDM0745+SD18‑D, SKU M503.220.1, sold under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of a compact optical design and a practical 0.7×–4.5× zoom range to achieve reliable inspection and fast setup in electronics and semiconductor environments; the lens offers cost‑effective performance as an entry‑level instrument. Order the Mono Video Zoom directly via Metav Werkzeuge or ask our consultants if needed. Mono Video Zoom — compact optical zoom for inspection, 0.7×–4.5× Mono Video Zoom is a compact zoom lens designed for observation, inspection and measurement tasks in electronics and semiconductor applications Entry-level mono zoom lens 0.7×–4.5× variable magnification Suited for electronics and semiconductor inspection Versatile magnification that speeds up inspection tasks The 0.7×–4.5× zoom span covers both overview and detail checks without swapping optics, enabling rapid framing of assemblies and components. With a balanced optical design the lens supports consistent image quality across the entire zoom range, which reduces setup iterations and shortens inspection cycles. This makes the instrument particularly useful for routine quality control where throughput and reproducibility matter. Fast setup and dependable handling in production An entry-level mechanical concept keeps operation straightforward and reliable: fewer adjustments mean quicker integration into camera rigs and inspection stands and lower risk of operator error. The restrained form factor and robust internal mechanisms contribute to image stability and repeatability during continuous use, improving measurement consistency in repetitive visual checks and test workflows. Tailored to electronics, semiconductors and LED workflows Engineered for observation, control and measurement in electrical engineering, semiconductor technology, LCE and LED inspection, the lens delivers practical optical coverage for typical industry tasks. The combination of compactness and optical performance provides a cost‑effective route to upgrade visual inspection capability, supporting documented checks and visual verification across production and laboratory environments. For technical suitability and to discuss integration options for your camera setup, contact Metav Werkzeuge — our consultants can advise on the best configuration for your inspection line and provide procurement support. Technical data Article number: M503.220 GTIN: 4054469144979 Model: ZDM0745 ECLASS: 32130102 Magnification: 0.7×–4.5× Tariff number: 90119090 Brand: Metav IndustryLine SKU: M503.220 Facts Zoom range expressed as continuous optical magnification Numeric identifier GTIN 4054469144979 Tariff code 90119090 Special features Entry-level model Suitable for observation, control and measurement in electrical engineering, semiconductor technology, LCE and LED applications Detail and technical drawings available among product assets FAQ What inspection tasks is the Mono Video Zoom best suited for? The Mono Video Zoom (Metav IndustryLine, SKU M503.220) is optimised for visual checks, component inspection and documentation tasks in electronics, semiconductor and LED workflows. Can this lens handle both overview and fine-detail imaging? Yes, the 0.7×–4.5× magnification range allows both coarse framing and closer inspection while maintaining consistent image rendition across the zoom span. Is the lens easy to integrate into existing camera systems? The compact, entry-level mechanical design simplifies mounting and alignment; integration into standard camera rigs for production inspection is straightforward when using appropriate adapters. Does the product include technical documentation? Technical drawings and detail images are provided among the product assets to support mechanical integration and optical specification checks for the Mono Video Zoom. Is this product suitable for laboratory and shop-floor use? Designed for practical inspection tasks, the lens supports routine QA and shop‑floor checks as well as bench‑top laboratory verification in electronics and semiconductor contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of the 1.5× magnification and the straightforward attachment concept for faster, more detailed visual inspection; order the DH-W1.5 attachment lens directly via Metav Werkzeuge or consult our product specialists for integration advice. DH-W1.5 attachment lens — 1.5× magnification for video microscopes (Metav IndustryLine) The DH-W1.5 attachment lens increases the magnification of compatible video microscopes by 1.5×, enabling closer inspection and clearer documentation in industrial and laboratory settings. 1.5× magnification for finer inspection Attachment lens for video microscopes Type DH-W1.5 for simple system upgrade Metav IndustryLine accessory, SKU M503.255.2 Enhanced detail for confident inspections The addition of a 1.5× magnification attachment lens provides a measurable improvement in visual detail without replacing existing objectives. By increasing the system magnification, finer structures become easier to evaluate, which supports quicker defect detection and more reliable quality control. The optical upgrade is particularly useful where higher resolving power is required for documentation or measurement tasks, while keeping existing imaging hardware in place. Simple integration that preserves workflow Designed as an attachment lens for video microscopes, the DH-W1.5 is intended for seamless integration into established inspection setups. This approach minimises downtime: the accessory attaches to the optical path and raises magnification without the need for extensive recalibration of camera systems. The straightforward upgrade path preserves current workflows and reduces the need for additional training or complex hardware changes. Consistent imaging for traceable results Increasing magnification can reduce field of view; however, it also concentrates optical information and improves the clarity of features captured for analysis. The DH-W1.5 supports consistent imaging results suitable for documentation, measurement and comparative inspection routines. When higher magnification is required for a specific production step, this accessory provides a controlled way to obtain the necessary detail while maintaining reproducible imaging conditions. For a precise 1.5× upgrade, request the DH-W1.5 attachment lens from Metav Werkzeuge — Metav IndustryLine specialists in Emmerich can advise on compatibility and system integration, reachable at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: M503.255.2 GTIN: 4061905048159 Manufacturer: Metav IndustryLine Facts Type: DH-W1.5 Magnification: 1.5× Category: Optik Special features Designed to expand magnification of video microscopes SKU: M503.255.2 EClass: 27371231 FAQ What does the DH-W1.5 attachment lens do? The DH-W1.5 attachment lens increases the effective magnification of a compatible video microscope by 1.5×, helping to resolve finer details for inspection and documentation. Is the DH-W1.5 compatible with all video microscopes? Compatibility depends on the microscope's optical interface and the available mounting options; the DH-W1.5 is intended as an accessory for systems designed to accept auxiliary lenses. Will adding the DH-W1.5 affect the field of view or working distance? Yes, increasing magnification typically reduces the field of view and can alter the apparent working distance; these optical consequences should be considered when integrating the DH-W1.5 into an inspection routine. Can the DH-W1.5 be used for measurement tasks? When combined with a calibrated imaging system, the higher magnification from the DH-W1.5 can improve visual resolution for measurement-related inspections, provided the overall optical setup and calibration support the required accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Dino-Lite XY Table — Precision X/Y Stage for Detailed Inspections The Dino-Lite XY Table is a compact precision tabletop stage that provides controlled X/Y movement and a rotating platform for accurate positioning during microscopy and inspection tasks. Compact X/Y Travel: 1.5" x 1.25" Smooth Knurled Rotation Controls Precision Machined Metal Construction Compatible with All Dino-Lite Handheld Microscopes Stable Metal Construction for Reliable Positioning The Dino-Lite XY Table combines a Metal X/Y Stage and a Rotating Platform designed for steady, vibration-minimized operation in bench-top environments. The robust Body Material ensures longevity and repeatable results even with frequent adjustments. This construction benefits laboratory and industrial users by providing a firm base for high-magnification observation, reducing the need for repeated refocusing and improving throughput during inspection tasks. Precision Movement That Simplifies Finding Targets Fine, calibrated travel of X: 1.5" and Y: 1.25" gives accurate lateral control for tracing features and aligning specimens. The knurled rotation knobs and the integrated rotating table permit subtle angular adjustments without disturbing the specimen. For end-users, this translates into faster task completion and reduced handling errors when measuring, documenting, or comparing small subjects under the microscope. Optimized for Hobbyists, Collectors, and Professionals Designed for collectors, hobbyists, graphic artists, and classroom use, this XY Stage delivers repeatable working distances and fixed magnification positions thanks to its base and insert adapter compatibility. The tabletop format is particularly suitable for users who need a dependable, compact staging solution that supports consistent imaging workflows and close observation without large, complex setups. Quick Integration and Broad Compatibility The XY Table connects easily to Dino-Lite handheld microscopes and accepts a rotating stage that mounts directly to the top plate, enabling simple rotation of the subject. Compatibility with a wide range of Dino-Lite models makes this unit a versatile addition to inspection benches, educational labs, and craft workstations. The included rotating stage and XY Base reduce setup time and improve measurement repeatability. Strongly recommend the Dino-Lite XY Table for situations requiring precise two-axis positioning and rotational control — for expert advice or help selecting the right setup contact METAV Werkzeuge via 📧 info@metav-werkzeuge.com, ☎️ +49 2822 7131930 or ✔️ WhatsApp +49 170 2837271 Highlighted Product Features High-Precision X/Y Travel Area The Stage provides a Travel Area of X: 1.5" / Y: 1.25", allowing fine lateral adjustments for locating and scanning small features. This range is optimized for close-up inspection tasks where controlled, incremental movement is required to capture multiple fields of view without moving the specimen. Rotating Table for Simple Angular Adjustment A dedicated Rotating Stage sits atop the XY Base, enabling fast and smooth rotation of the Subject without re-clamping. The rotation feature assists in examining specimens from multiple orientations, which is particularly useful for inspection of textures, edges, and part geometries. Precision Machined Components and Smooth Controls Precision machine-crafted components and knurled rotation knobs ensure consistent, low-friction motion and ergonomic control. These characteristics reduce operator fatigue during prolonged sessions and provide reliable repeatability when documenting or measuring repeatable sample positions. Technical Information Product Name: Dino-Lite XY Table Travel Area: X: 1.5" / Y: 1.25" X/Y Table Size: 3.25" x 4.25" Dimensions: 12.7 cm (W) x 15.2 cm (L) x 7.6 cm (H) Package Includes: XY Base, Rotating Stage Weight: 907 g (1.99 lb) Warranty Period: 1 year Body Material: Metal Manufactured In: China Compatible With: MS36A-C2, MS36A-A2, MS36A-A3, MS54B, MS22B, All Dino-Lite Handheld Microscopes Regulatory Approval: ROHS Manufacturer: AnMo Electronics Corporation; 17F-1, No. 97, Sec. 4, Chongxin Road, Sanchong Dist., New Taipei City 241513, Taiwan; Tel:+886-2-29749126; E-Mail:Sales@anmo.com.tw FAQ What applications is the Dino-Lite XY Table best suited for? The Dino-Lite XY Table is ideal for detailed inspection, measurement, and documentation tasks where precise lateral positioning and rotation are necessary. The Dino-Lite tabletop stage is frequently used in education, hobbyist work, quality control, and small-part inspection. Can the Dino-Lite XY Table be used with any Dino-Lite handheld microscope? The Dino-Lite XY Table is compatible with a wide range of Dino-Lite Handheld Microscopes as listed in the technical data. For specialized models or high-magnification variants, confirm compatibility with METAV Werkzeuge if uncertain. How does the rotating stage improve inspection workflows with the Dino-Lite XY Table? The rotating table included with the Dino-Lite XY Table enables quick angular adjustments of the Subject without re-clamping, making it easier to reveal surface contours, edges, and orientation-dependent features while maintaining alignment for imaging. Is setup and maintenance of the Dino-Lite XY Table complicated? Setup is straightforward: the rotating stage mounts directly to the top plate of the XY Base. Routine maintenance involves keeping the machined surfaces clean and occasionally checking fasteners; for further assistance, METAV Werkzeuge provides competent advice and support.
Benefit from a wider field of view and reliable integration with C-mount cameras to simplify imaging workflows; the adapter’s 0.5× lens reduces magnification for improved documentation while keeping setup straightforward — order via Metav Werkzeuge or speak to a consultant for application advice. Euromex C‑mount adapter with 0.5× lens — camera adapter for 1/2‑inch sensors The Euromex C‑mount adapter 0.5× converts trinocular microscope ports for use with 1/2‑inch C‑mount cameras, delivering a reduced magnification and broader viewing area ideal for inspection and documentation. 0.5× reduction lens for wider field of view C‑mount interface for 1/2‑inch cameras Fits trinocular tubes on NexiusZoom series Optimised for digital imaging workflows Capture a broader inspection area with reduced magnification The 0.5× lens decreases optical magnification to expand the field of view, making it simpler to capture entire samples or assemblies in a single frame. For users employing 1/2‑inch sensors, this results in more context per image without changing the objective; the reduced magnification can improve throughput during routine inspections and documentation because fewer frame-by-frame movements are required. The optical reduction is particularly useful in quality control and process documentation where overview shots and consistent imaging geometry are required. Reliable mechanical and optical connection for trinocular microscopes Designed for secure attachment to trinocular tubes, the adapter uses a standard C‑mount interface to accept compatible cameras and maintain alignment with the optical axis. Integration with NexiusZoom series microscopes is confirmed, ensuring mechanical fit and optical compatibility with the specified models. This direct fit avoids improvised adapters and reduces setup time, helping laboratory and production teams to maintain repeatable imaging conditions for measurement, archiving or remote review. Streamlined digital workflows and clear results By combining a tested reduction lens with the universal C‑mount, this adapter supports efficient digital imaging pipelines: fewer lens changes, quick camera swaps and consistent framing for image processing or metrology software. The compact design facilitates straightforward installation into the trinocular port and preserves the microscope’s imaging geometry, so calibration steps are minimised. For practical use, this means faster documentation cycles and a lower risk of alignment errors during routine inspections. For precise imaging with Euromex optics and to discuss compatibility with existing NexiusZoom equipment, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.9850 Product type: Camera adapter Manufacturer: Euromex Mount: C‑mount Lens factor: 0.5× Data Sensor format: 1/2 inch Compatible series: NexiusZoom; NexiusZoom EVO; NexiusZoom ESD Special features Compatible with trinocular tubes Cross‑selling SKUs: NZ.1703-A; NZ.1703-AP; NZ.1703-B; NZ.1703-M; NZ.1703-P; NZ.1703-PG; NZ.1703-S; NZ.1703-U; NZ.1903-A; NZ.1903-AP; NZ.1903-B; NZ.1903-B-ESD; NZ.1903-M; NZ.1903-P; NZ.1903-P-ESD; NZ.1903-PG; NZ.1903-S; NZ.1903-S-ESD; NZ.1903-U; NZ.1903-U-ESD; NZ.5303 FAQ How does the 0.5× lens affect image magnification and field of view? The Euromex C‑mount adapter NZ.9850 reduces optical magnification by a factor of 0.5, which widens the field of view on a 1/2‑inch sensor and enables imaging of larger sample areas without changing the microscope objective. Which cameras are compatible with this adapter? Compatibility is limited to C‑mount cameras with a 1/2‑inch sensor format; the adapter provides the standard C‑mount interface used by many industrial and laboratory cameras for direct attachment. Can the adapter be used with trinocular microscope heads? Yes, the adapter is designed for installation into a trinocular tube and is specified for use with the NexiusZoom family (including NexiusZoom EVO and ESD variants), ensuring proper mechanical and optical integration. Will using this adapter change the calibration of existing imaging software? Reducing magnification alters the imaging scale, so calibration should be verified after installation; the adapter enables wider images but may require an updated scale factor in measurement or imaging software. Is this adapter suitable for documentation and inspection tasks? The NZ.9850 is optimised for digital imaging workflows, offering a broader view for documentation and inspection tasks while keeping camera mounting straightforward and repeatable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
- Stereokopf mit hochwertiger Optik Okular Weitfeld 10x Stativ mit Feineinstellung Stromversorgung 230 V / 50 HzTechnische Daten- Vergrößerung: 10- Zoom: 1X - 4X- Arbeitsabstand: 80mm- Licht: 12 V, 10W
Compact, single‑use sheets for straightforward maintenance of optical equipment combine practicality with reliable cleanliness; the format keeps handling simple while limiting cross‑contamination. Order the pack via Metav Werkzeuge or consult the team for suitability to specific instruments. Euromex Lens Cleaning Paper PB.5245 – 100 Sheets, Optics Wipes A pack of the Euromex Lens Cleaning Paperis designed for quick, disposable cleaning of lenses and other optical surfaces in laboratories and workshops Lint-free for streak-free cleaning Safe for coated optical surfaces 100 sheets per pack for routine maintenance Reliable maintenance for optical equipment The Euromex Lens Cleaning Paper PB.5245 provides a straightforward supply option for upkeep of microscopes, camera lenses and precision optics. As a pack of 100 sheets, it supports regular, single‑use cleaning routines that help to limit particle transfer between surfaces. The sheets are intended to be used as disposable wipes to maintain the condition of optical surfaces without leaving residues that can impair image quality. For procurement planning, the compact pack size allows for convenient storage at the bench or in a service kit. Simple handling and practical application Single sheets are easy to separate and use for targeted cleaning tasks, reducing preparation time and supporting efficient workflows in both laboratory and workshop environments. When used with a suitable solvent or cleaning fluid appropriate for the coating in question, the sheets assist in removing dust and light smears; they can also be employed dry for delicate surface dusting. The product’s format supports hygienic practices by encouraging single‑use consumption, which is particularly useful where cross‑contamination must be minimised during routine maintenance or instrument checks. Confidence through supply and service Sourcing optics consumables from a dependable supplier reduces procurement complexity and secures consistent availability for recurring maintenance. Metav combines an extensive product range with a stable supply chain and a reputation as a quality filter for the European market; this makes it straightforward to introduce regular replacement intervals for consumables such as lens wipes. For further specification checks or to confirm suitability for speciality coatings, Metav’s advisers are available to assist and can provide additional technical information on request. For advice on compatibility or to arrange a purchase through Metav Werkzeuge, contact the Metav consultants who can confirm suitability for specific optical systems and ensure timely delivery Technical Data Article number: PB.5245 Brand: Euromex Item description: Lens cleaning paper Facts Pack contents: 100 sheets per pack Product type: Lens cleaning paper UID: PB.5245 Special features Disposable sheets for single‑use cleaning Suitable for optical surfaces and lenses Compact packaging for bench storage FAQ What is the pack size and format of this product? The pack contains 100 sheets of Euromex Lens Cleaning Paper PB.5245 supplied as individual disposable sheets. Can these sheets be used on microscope objectives? Yes, the sheets are intended for cleaning optical surfaces including microscope objectives when used with an appropriate solvent or dry for light dusting. Do the sheets leave residues or fibres on the lens? The product is designed for optical cleaning tasks and is supplied to support residue‑free wiping when used correctly. Is this item suitable for coated lenses? Euromex Lens Cleaning Paper PB.5245 can be used on coated optics; users should select a cleaning fluid compatible with the coating before application. How should the sheets be stored? Keep the pack in a dry, dust‑free environment and close packaging after opening to preserve cleanliness of the remaining sheets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of a compact inspection solution that combines a 12 mm slim probe, dimmable white LEDs and IP67 protection for dependable in-line visual checks; order the device directly via Metav Werkzeuge or consult the team for application advice. M503.177.2 camera probe — slim IP67 inspection probe with dimmable white LEDs The M503.177.2 camera probe is a slim inspection camera probe designed for photo‑video endoscopy and confined‑space visual checks, delivering reliable image capture and adjustable illumination for maintenance, quality control and assembly inspections. 12 mm slim probe diameter Dimmable white LED illumination IP67 dust and water protection See clearly across the inspection range The probe offers a depth of field 12.7–305 mm, paired with a 50 mm focal length and a 60° field of view, producing usable imagery across short to medium inspection distances. The built‑in 640×480 resolution sensor provides a clear live image for fault tracing and visual documentation; the optical parameters reduce the need for constant refocusing and speed up routine checks. These characteristics deliver a measurable productivity gain in inspection tasks where repeatable image quality reduces rework and verification time. Illuminate and access narrow spaces with confidence A 12 mm external diameter and 1000 mm length enable access into tight assemblies and ducts while maintaining handling comfort. The probe’s dimmable white LEDs give control over contrast and glare, enabling optimal illumination on reflective or dark surfaces without post‑processing. For field inspection teams, the combination of a slim profile and adjustable lighting translates into fewer measurement interruptions and more consistent defect detection during on‑site or bench inspections. Robust design for repeatable results Rated IP67, the probe withstands dust ingress and temporary immersion, making it suitable for workshop, plant and outdoor environments where contamination and moisture are present. The construction supports routine use in maintenance and production environments, lowering downtime risk through a durable interface and straightforward integration into existing inspection workflows. Where traceability is required, the device’s identifiers and classification support procurement and inventory control in professional toolchains. Contact Metav Werkzeuge today to discuss the M503.177.2 camera probe for resilient inspection setups and to receive tailored advice from our specialists Technical data SKU: M503.177.2 GTIN: 4054469167930 eCl@ss: 21059058 Tariff number: 85229080 Manufacturer: Metav IndustryLine Category: Optik Numbers / Core technical data Probe diameter: 12 mm Length: 1000 mm Resolution: 640×480 Focal length: 50 mm Depth of field: 12.7–305 mm Field of view: 60° IP rating: IP67 Designs / Special features Dimmable white light LED illumination Slim probe body for narrow‑space inspection Suited for photo‑video endoscopy and visual inspection Robust protection against dust and temporary immersion FAQ What is the probe diameter and why does it matter? The probe has a 12 mm diameter; this slim profile allows access into tight assemblies and small bore inspections where larger inspection cameras cannot reach. Is the probe suitable for wet or dusty environments? Yes. The M503.177.2 probe is IP67 rated, providing protection against dust ingress and temporary immersion for reliable field use. What illumination does the probe use? The probe features dimmable white LEDs, enabling adjustable lighting to reduce glare and improve contrast on different surface types. What inspection range can be expected? The optical setup provides a depth of field of 12.7–305 mm, making it effective for close‑range checks up to medium working distances without frequent refocusing. What image quality can be expected from the camera? The integrated sensor delivers 640×480 resolution, suitable for live inspection, documentation and condition assessment in many industrial and maintenance contexts. Which applications is this probe best suited for? Typical uses include machine maintenance, quality control of assemblies, inspection of ducts, pipes and confined spaces, and any photo‑video endoscopy tasks requiring a slim probe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of a slim 12 mm probe head combined with dimmable white‑light LEDs and IP67 protection for reliable visual inspection in confined or wet environments; order the camera probe directly via Metav Werkzeuge or consult our specialists for tailored advice. Camera probe M503.177.1 – 12 mm inspection probe, IP67, 1 m reach (Metav IndustryLine) The camera probe M503.177.1 is a compact inspection camera probe designed for remote visual inspection of narrow bores, assemblies and service access points in industrial and workshop environments 12 mm diameter for narrow access Dimmable white‑light LEDs for precise lighting IP67 protection for dust and immersion 1 m reach for deep inspections Slim profile with dependable illumination for confined inspections The slender 12 mm probe head delivers access where larger optics cannot, enabling visual checks of tight bores, valves and assemblies with minimal disruption to the component. Coupled with dimmable white‑light LEDs, the module provides adjustable illumination to avoid glare and reveal surface detail, while the lightweight 0.2 kg construction reduces arm fatigue during repetitive checks. The IP67 rating guarantees protection against dust ingress and temporary immersion, making the probe suitable for damp or contaminated environments where consistent imaging is required. Imaging characteristics explained for reliable defect detection A broad 60° field of view and a focal length of 50 mm produce a useful balance between context and detail; the specified depth of field 12.7–305 mm allows clear images from close‑range to extended distances without constant refocusing. The sensor resolution of 640×480 is optimised for inspection tasks where real‑time video and clear defect indication are priorities rather than high‑magnification photography. These optical parameters translate into faster diagnosis and fewer repeat inspections, enhancing operational efficiency in maintenance and quality control workflows. Practical benefits and industrial applications Designed for routine maintenance, plant inspections and assembly checks, the probe is particularly useful where confined geometry or moisture are present. The 1 m stainless‑sheathed length offers reach into housings and pipelines while preserving manoeuvrability. Compatibility with standard inspection systems in the optics category ensures straightforward integration into existing toolsets. The robust build and controlled illumination reduce measurement uncertainty during visual evaluation, supporting consistent decision‑making across production and field service teams. For inspections that demand a slim, well‑illuminated and rugged probe, contact Metav Werkzeuge to request the camera probe M503.177.1 and receive expert guidance from our specialists. Technical Data Article number: M503.177.1 GTIN: 4054469167794 Manufacturer: Metav IndustryLine eClass: 21059058 Customs tariff number: 85229080 Facts Diameter: 12 mm Length: 1,000 mm Weight: 0.2 kg Protection class: IP67 Viewing angle: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Resolution: 640×480 Special features Dimmable white‑light LED illumination Suitable for optics inspection applications Robust construction for workshop and field use FAQ What environments is the probe suited for? The camera probe M503.177.1 is rated IP67, making it suitable for dusty environments and temporary immersion; it is therefore appropriate for many workshop and field inspection tasks. How far can the probe see clearly? With a focal length of 50 mm and a depth of field from 12.7–305 mm, the probe provides clear imaging from close range through to longer inspection distances without continual refocusing. Is the illumination adjustable for sensitive surfaces? Yes, the unit features dimmable white‑light LEDs, allowing illumination to be adjusted to avoid glare and reveal surface details during inspection. Can the probe be integrated into existing inspection systems? The probe is designed for use in the optics inspection category and can be integrated with compatible inspection setups; the slim 12 mm head eases fitting into existing fixtures. What is the typical use case for this probe? Typical applications include valve and bore inspections, assembly checks, non‑destructive visual assessment of housings and pipelines, and routine maintenance where access is restricted Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of the combination of detachable 5" LCD monitoring, wireless 2.4 GHz image transmission and a slim 9 mm probe for fast, reliable inspections in confined assemblies; order the inspection unit directly via Metav Werkzeuge or ask the consultants for technical guidance. Photo‑video endoscope M503.173.2 — Inspection borescope with detachable 5" LCD and wireless transmission (Metav IndustryLine) The Photo‑video endoscope M503.173.2 is a compact inspection borescope designed for visual checks in inaccessible areas such as cavities, pipes and assemblies in automotive and construction environments Detachable 5" colour LCD monitor Wireless image transmission (2.4 GHz) up to 10 m Slim 9 mm probe for narrow access Internal memory 128 MB and SD card slot Inspect confined spaces faster with a slim probe and clear visuals The inspection borescope combines a 9 mm probe with a 1,000 mm probe length, enabling access into narrow bores and long cavities while maintaining image stability. The slim probe diameter reduces the need for disassembly, saving production time and avoiding unnecessary part handling. With a rechargeable lithium battery and mains adapter included, the system supports uninterrupted inspections on-site or at the workbench. The design prioritises operational efficiency: quick insertion, stable imaging and straightforward handling support faster decision-making in maintenance and quality checks. Capture and document issues with on-board recording and simple controls Integrated photo and video capture is supported by 128 MB internal memory and an SD card slot for extended storage and transfer. Images are recorded in the device and can be exported via the removable monitor or by using a standard SD card (SD card not included). The detachable 5" colour LCD monitor features digital zoom (1×–4×) and 180° image rotation, allowing detail inspection and correct orientation without reworking the probe position. These recording and viewing functions deliver a verifiable visual record for defect analysis, service reports and traceable maintenance documentation. Reliable wireless connectivity and adaptive lighting for varied conditions Wireless 2.4 GHz image transmission to the detachable monitor offers a practical cable-free setup with a maximum range of 10 m, enabling hands‑free observation while working at awkward angles. Brightness-adjustable LED illumination at the probe tip compensates for low-light environments, and the monitor’s controls allow on-the-fly tuning of exposure and zoom to highlight critical features. This combination reduces inspection time and increases confidence in findings by delivering consistently legible images in variable conditions. Suited to workshop and field environments with clear application focus Engineered for visual checks rather than precision metrology, this inspection system is ideal for quick evaluations in automotive maintenance, plant installations and building inspections where visual access is restricted. The product’s balance of portability, detachable monitoring, and on-board storage makes it a practical choice for service technicians and workshop teams who require dependable imaging without complex setup. The robust feature set supports routine diagnostics and fault localisation, enabling informed decisions that reduce downtime. Contact Metav Werkzeuge for tailored technical advice or ordering information on the Metav IndustryLine photo‑video endoscope M503.173.2 — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M503.173.2 GTIN: 4054469167565 eCl@ss: 21059058 Customs tariff number: 85219000 Facts Probe diameter: 9 mm Probe length: 1,000 mm Monitor size: 5 in Wireless range: 10 m Resolution: 800 × 480 pixels Special features Detachable 5" colour LCD monitor Wireless image transmission 2.4 GHz Digital zoom 1×–4× and 180° image rotation Rechargeable lithium battery and mains adapter Internal memory 128 MB and SD card slot Photo and video recording Adjustable LED illumination FAQ How is the image transmitted from the probe to the monitor? Image data is sent wirelessly via 2.4 GHz transmission to the detachable colour monitor with a maximum practical range of 10 m. Can photos and videos be recorded and exported? Yes. The unit records to 128 MB internal memory and to an SD card via the integrated slot; SD card is not included. What probe dimensions and reach does the system offer? The inspection probe measures 9 mm in diameter with a length of 1,000 mm, suitable for narrow bores and extended cavities. Is the monitor permanently attached or removable for documentation? The 5" colour LCD monitor is detachable, allowing direct viewing, image review and simple transfer of recorded media. For which applications is this inspection unit intended? Designed for quick visual checks in confined or inaccessible areas, it is particularly useful in automotive maintenance, pipe and cavity inspection, and general building inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Compact, high-intensity illumination combined with selectable mains compatibility ensures dependable microscopy lighting for international workshops; order the unit via Metav Werkzeuge or consult our technical team for specification matching. Euromex EK-1 cold light source — 100 W halogen, 110 V / 230 V variants The Euromex EK-1 cold light source supplies bright, steady illumination for microscopy and inspection tasks in laboratory and production environments. 100 W high-intensity halogen illumination Available in 110 V or 230 V variants Cold light output for microscopy applications Stable, continuous illumination for inspection Bright, consistent illumination that supports precise inspection The unit delivers 100 W of halogen light in a form optimised for visual inspection and microscopy work, providing a stable illumination level that reduces lighting-induced variability during measurement or quality checks. A reliable light source helps maintain consistent visual contrast and colour rendition across inspection runs, which supports repeatable assessments on the shop floor. Because the output is engineered as cold light, heat transfer to the observed object is minimised compared with direct lamp exposure, helping to protect delicate specimens and components during extended observation periods. This combination of intensity and thermal control makes the device suitable for demanding inspection tasks where image clarity and component safety are priorities. Voltage flexibility for global and workshop use Two mains options are offered: 110 V AC and 230 V AC variants, allowing deployment in regions with differing supply standards without the need for external converters. The availability of these voltage options simplifies procurement for international facilities and multi-site operations, reducing installation complexity and downtime. Selecting the appropriate mains version at purchase ensures electrical compatibility with existing equipment racks and inspection benches, supporting seamless integration into established workflows. Clear voltage specification facilitates compliance with local electrical planning and workplace safety practices while maintaining consistent light performance. Integration, maintenance clarity and available accessories The design concentrates on dependable operation and straightforward incorporation into existing inspection setups, with attention to continuous, stable illumination suitable for microscope illumination. Related items and spare parts are listed to support lifecycle management and reduce service interruptions; see connected SKUs for matching accessories. Metav’s experience in supplying precision tools means technical queries and compatibility checks are supported by an experienced team, enabling correct specification for laboratory or production use. The emphasis is on predictable performance and a transparent supply chain so that lighting becomes a dependable part of the inspection environment rather than a frequent maintenance concern. Contact Metav Werkzeuge to confirm the suitable voltage option, check compatibility with existing microscopes, or to place an order for the Euromex EK-1 cold light source through our technical sales team. Technical Data Article number: LE.5210 Manufacturer: Euromex Product type: Cold light source Facts Power: 100 W Lighting: Halogen Voltage variants: 110 V AC, 230 V AC Special features Cold light output suitable for microscopy and inspection Continuous, stable illumination Cross-selling SKUs: LE.5214; LE.5215 FAQ What mains options are available for this cold light source? The Euromex EK-1 cold light source is offered in two mains variants, 110 V AC and 230 V AC, allowing selection according to regional supply. Is the lighting source suitable for laboratory microscopes? Yes; the cold light output and 100 W halogen illumination are designed for microscopy and close visual inspection applications where steady, bright light is required. Can the unit be used for extended inspection periods without overheating samples? The EK-1 is specified as a cold light source and its output is intended to minimise heat transfer to the specimen compared with direct lamp exposure, supporting longer observation intervals. Are there recommended accessories or spare parts? Related items and spare components are listed under cross-selling SKUs LE.5214 and LE.5215 to support maintenance and accessory needs. Where can technical compatibility be verified before purchase? Metav Werkzeuge’s technical team can advise on compatibility with existing microscope models and inspection setups to ensure the chosen voltage variant and accessories match operational requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Take advantage of high centring precision and a compact footprint to streamline inspection and clamping operations; the ±0.004 mm tolerance paired with a 7–70 mm diameter range reduces setup iterations and increases repeatability — order directly via Metav Werkzeuge or ask our consultants for integration advice. Double prism pair for Ø 7–70 mm, L100 × B75 × H75 mm – TECWERK Double prism pair for centred support and inspection of cylindrical workpieces across a wide diameter range. High-precision tolerance ±0,004 mm For cylindrical diameters Ø 7–70 mm Dimensions L100 × B75 × H75 mm Improved measurement certainty through precise support The double prism pair delivers a defined bearing surface with a tolerance of ±0,004 mm (approx. 4 µm), which directly reduces lateral play and runout during clamping or inspection. In practical terms, this level of precision means fewer re-measurements and more reliable comparative results on micrometre and caliper checks. The prism geometry ensures stable point contact that converts small positional deviations into predictable, repeatable values, supporting tighter process control in metrology and quality assurance tasks. Wide diameter compatibility for fewer tool changes With an effective range of Ø 7–70 mm, the prism pair accommodates a broad spectrum of round components, from small shafts to medium-sized cylindrical parts. The compact base of L100 × B75 × H75 mm provides a stable footprint while keeping the fixture area small, enabling denser bench layouts and simpler alignment with test devices. This compatibility reduces the need for multiple dedicated supports, helping workshops and inspection labs to maintain throughput and minimise fixturing complexity during batch checks. Seamless integration into inspection and clamping workflows Designed for straightforward placement in existing rigs, the unit offers a robust support solution that improves repeatability and reduces setup time. The geometry of the prisms promotes consistent centring, which benefits downstream processes such as turning, grinding or dimensional measurement. For measurement technicians and production engineers, the result is a tangible increase in process reliability: fewer manual adjustments, more consistent readings and a smoother production flow that supports higher overall efficiency. For precise component support from TECWERK, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000851482NW SKU: 2000851482NW Label: Doppelprismenpaar f.D.7-70mm STA L100xB75xH75mm Tol.± 0,004mm TECWERK Dimensions & range Length: 100 mm Width: 75 mm Height: 75 mm Diameter range: Ø 7–70 mm Features & applications Product type: Double prism pair Tolerance: ±0,004 mm Packaging unit: 1 Brand: TECWERK FAQ What diameter range does the prism pair cover? The prism pair supports cylindrical parts in the range Ø 7–70 mm, making it suitable for a wide variety of shafts and round components. How precise is the centring provided by the prisms? Centring precision is specified as ±0,004 mm (approx. 4 µm); this tolerance improves repeatability for inspection and clamping operations when using the TECWERK double prism pair (SKU 2000851482NW). Can the unit be integrated into an existing inspection setup? Yes, the compact footprint L100 × B75 × H75 mm allows easy placement on measurement benches and within clamping fixtures to enhance stability and reduce setup time. What applications benefit most from this prism pair? The set is ideal for metrology checks, fixture support during turning or grinding, and any workflow where consistent centring of cylindrical parts is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Take advantage of the combination of high luminous output, flexible segment control and a wide mounting range for reliable, repeatable inspection results; order the Euromex LED ring light directly via Metav Werkzeuge or ask our consultants if needed. LE.1973 LED ring light — 144 LEDs, adjustable intensity, segment control (Euromex) The LE.1973 LED ring light provides daylight-balanced, high‑lux illumination for stereomicroscope heads used in inspection and quality control. 144 LEDs for even, shadow‑reduced lighting 23,000 lx at 100 mm for high‑contrast inspection Four-segment control for directional illumination Fits microscope heads Ø25–61 mm with external PSU Consistent, daylight-balanced illumination for reproducible inspection The ring delivers a measured 23,000 lx at a 100 mm working distance and a neutral 6,500 K colour temperature, ensuring consistent visual conditions for routine checks and image capture. With 144 LEDs arranged to minimise shadowing, the light produces an even field that supports accurate surface inspection and reduces the need for post‑processing in documentation. The specified luminous output and stable colour temperature provide a verifiable basis for comparison between inspections and for process documentation. Flexible lighting control to manage contrast and reflections Segmentation and dimming enable targeted lighting strategies: the four independent segments allow oblique, lateral or partial illumination without additional accessories, while the continuous dimming function fine‑tunes contrast to reveal surface texture or small defects. This segment control together with adjustable brightness improves visual differentiation of scratches, solder joints or surface finishes, and integrates seamlessly with the NexiusZoom and NexiusZoom EVO series to support a variety of inspection tasks. Low heat, robust power design for safe, stable operation An external power supply converts the workshop mains range (100–240 V AC / 12 V DC) at 50/60 Hz to the low‑voltage feed required by the ring, keeping heat generation off the microscope head and reducing mechanical load. The external PSU likewise stabilises output over mains fluctuations, helping to maintain consistent illumination during longer inspection sessions. The low‑voltage operation supports safety in laboratory and production environments while simplifying thermal management for sensitive samples. Built for microscopy workflows and demanding inspection environments Designed to clamp around stereomicroscope heads with a mounting diameter range of 25–61 mm, the light is compatible with common stands and Nexius series heads, offering immediate functional benefits in electronics assembly, component inspection, material analysis and precision assembly. Its combination of high luminous flux, controlled colour temperature and segment‑based shading makes it a practical choice where reliability, repeatability and visual clarity are essential. Choose the daylight‑balanced illumination of the Euromex LE.1973 for precise inspection results and contact Metav Werkzeuge for tailored specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: LE.1973 Brand: Euromex Product type: LED ring light Facts LED count: 144 Illuminance: 23,000 lx at 100 mm Colour temperature: 6,500 K Power supply: 12 V DC Input voltage: 100–240 V AC Frequency: 50/60 Hz Mounting diameter: 25–61 mm Illumination segments: 4 Features External power supply Brightness adjustable Segment control (4 sectors) Compatible with NexiusZoom; NexiusZoom EVO Compatible stands: U, B, A, AP SKU: LE.1973 FAQ How bright is the illumination and at what distance is this measured? The ring provides 23,000 lx measured at a 100 mm working distance, delivering a strong, uniform field suitable for inspection with the LE.1973. Can the lighting direction be adapted for detailed surface inspection? Yes, the LE.1973 features four independently switchable segments, enabling directional illumination to reduce glare and highlight surface features. Which microscope heads and stands are the ring compatible with? The ring fits microscope heads with diameters from 25–61 mm and is compatible with NexiusZoom and NexiusZoom EVO series as well as stands U, B, A and AP. What power supply is required and how is heat managed? An external power supply converts 100–240 V AC to 12 V DC at 50/60 Hz; locating the PSU externally reduces heat at the microscope head and improves operational stability. Is adjustable brightness available for photographic documentation? Continuous dimming is provided so illumination levels can be matched to camera exposure settings and inspection requirements when using the LE.1973. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com