Mikroskopie für Profis, Fortgeschrittene und Einsteiger

Take advantage of the dual magnification, large and small lens diameters, and a lightweight plastic handle for precise visual inspection tasks; these features deliver a balance of usability and optical clarity for routine workshop and inspection work. Order the hand magnifier directly via Metav Werkzeuge or consult the team for technical advice. Tech-Line Hand magnifier (SCHWEIZER) — 2× / 4×, lenses Ø 90 / 20 mm Tech-Line hand magnifier for inspection and assembly work, featuring two magnification levels and two lens diameters for flexible use Dual magnification 2× and 4× Two lenses Ø 90 mm and Ø 20 mm Lightweight plastic handle Tech-Line series for inspection tasks Improved inspection accuracy with selectable magnification The SCHWEIZER Tech-Line hand magnifier combines a large viewing lens and a small detail lens to deliver both broad overview and focused inspection without changing tools. The 2× setting on the larger lens is ideal for general checks and reading fine print, while the 4× insert lens provides concentrated enlargement for small features and defects. This arrangement reduces handling time and minimises the need for multiple instruments, improving throughput in quality control and assembly operations. Practical design that supports frequent use A durable plastic handle gives a lightweight yet stable grip suitable for repeated use on the shop floor or at the bench. The larger 90 mm lens enables comfortable visual coverage, while the 20 mm lens provides a tight field for precise examination. The combination of sizes supports ergonomic working positions and reduces eye strain during extended inspection, making the tool well suited for technicians and inspection staff who require both rapid overview and fine-detail check capabilities. Where this magnifier brings real benefits The tool is particularly useful in visual inspection, component assembly, stamp and print verification, and electronics work where both context and detail matter. The two-lens solution shortens the inspection workflow: initial checks can be performed with the broad lens and immediate close-up verification with the small lens. Clear optical performance and a straightforward design help maintain consistent inspection standards across small workshops and production lines. Contact Metav Werkzeuge for purchasing advice or to place an order for the SCHWEIZER Tech-Line hand magnifier (SKU 4000851740NW); technical consultants are available to clarify suitability for specific inspection tasks Technical Data Article number: 4000851740NW SKU: 4000851740NW Label: Handlupe Tech-Line Vergr. 2x/4x Linsen-D.90/20mm Schweizer Brand: SCHWEIZER Product type: Hand magnifier Product line: Tech-Line UID: 4000851740NW Facts Magnification: 2× / 4× Lens diameters: 90 mm / 20 mm Packaging unit: 1 Special features Handle material: plastic Dual-lens configuration Intended use: inspection and detail work FAQ What magnification levels does the magnifier offer? The magnifier provides 2× and 4× magnification, enabling both general overview with the larger lens and detailed inspection with the smaller lens. Are the lens diameters suitable for component inspection? Yes, the combination of a 90 mm main lens and a 20 mm detail lens supports both broad visual checks and close-up examination for small components. Is the tool lightweight enough for extended use at the bench? The plastic handle and compact design make the device comfortable for repeated use during inspection routines without excessive fatigue. Can the magnifier be used in electronics and print inspection? The dual magnification and clear optics are well suited to electronics assembly, solder joint checks and print or stamp verification where both context and fine detail must be assessed. Which SKU identifies this item for ordering? Orderers should reference SKU 4000851740NW when enquiring about or ordering the SCHWEIZER Tech-Line hand magnifier. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise visual inspection, a flexible arm with stable base, and compact dimensions for consistent quality checking on the bench; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. Peak Stand Magnifier – 2.2× magnification, 90 mm lens, flexible arm The Peak Stand Magnifier is a bench-mounted inspection loupe designed for close visual checks, assembly tasks and quality control in workshops and laboratories. 2.2× magnification with clear optics 90 mm lens for broad field of view Flexible arm with stable base for precise positioning Compact footprint for small benches Speed up inspection and reduce rework with clearer detail The large 90 mm lens combined with 2.2× magnification provides a wide, distortion-free viewing area that helps identify small defects faster than unaided sight. By making fine features and solder joints easier to evaluate, the inspection loupe supports quicker decision-making and reduces the likelihood of rework, contributing to a more efficient production flow. The optical clarity is particularly useful for repeat visual checks during quality control and for close-assembly operations where visual certainty saves time and materials. Precise positioning that improves ergonomics and repeatability The flexible arm with a stable base enables accurate, fatigue‑reducing positioning of the lens over the workpiece. The articulated support allows the viewer to lock the loupe in place once the ideal angle and distance are found, improving repeatability of inspections and lowering neck and shoulder strain during extended tasks. This ergonomic advantage not only enhances operator comfort but also maintains consistent inspection results across shifts, supporting reliable quality assurance routines. Compact design that integrates seamlessly into the workshop Measuring 145x120x485, the unit has a small bench footprint while delivering a broad inspection field, so it fits into busy workstations without obstructing other equipment. The robust base keeps the loupe steady during delicate tasks, and the overall construction is tailored for everyday use in industrial and craft environments. The combination of a broad lens and a manoeuvrable arm makes this stand magnifier suitable for electronic assembly, small‑parts inspection and laboratory checks where space and precision matter. Contact Metav Werkzeuge for specialist guidance on integrating the Peak inspection tools into production or to request a quotation – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS905.428 Manufacturer: Peak Model name: Peak Stand Magnifier Facts Dimensions: 145x120x485 Lens diameter: 90 Magnification: 2.2x Special features Flexible arm with stable base Designed for bench inspection and assembly Broad field of view for detailed visual checks FAQ What magnification does the magnifier offer? The unit provides 2.2× magnification, suitable for detailed visual inspection and assembly tasks. How large is the viewing lens? The lens has a 90 mm diameter, offering a wide field of view for easier inspection of small components. Is the loupe suitable for repeated bench work? Yes, the flexible arm and stable base are designed to enable comfortable positioning and repeatable inspections during extended tasks. What type of tasks is this loupe intended for? This stand magnifier is intended for quality control, electronic assembly, small‑parts inspection and laboratory checks where clear visual detail is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency: the manufacturer "SCHWEIZER" is not included in the supplied manufacturer list; therefore a product description cannot be generated, as the absence of this manufacturer in the provided data set prevents the system from accurately associating the relevant details, specifications, or attributes necessary to create a comprehensive and reliable description for the product in question, which could lead to further complications or errors in the database if not addressed promptly, highlighting the importance of ensuring that all manufacturers are correctly listed and accounted for in the initial data input to avoid such issues.

Combining a 360° rotatable stage, an integrated polariser and a screw-in analyser, this polarisation set delivers controlled polarised-light contrast for reliable material inspection and faster optical evaluation; order the Polarisation set for NexiusZoom directly via Metav Werkzeuge or ask our consultants if needed. Polarisation set for NexiusZoom (NZ.9520) — 360° rotatable stage with integrated polariser The Polarisation set for NexiusZoom is a dedicated polarising accessory for NexiusZoom microscopes, providing adjustable polarisation contrast and an analyser designed for secure underside mounting in a 95 mm aperture. 360° rotatable stage for precise orientation Integrated polariser for controlled contrast Screw-in analyser for underside mounting Fits 95 mm mounting hole; only for new microscopes Enhanced contrast for reliable material inspection The combination of a 360° rotatable stage and an integrated polariser enables fine control over polarisation orientation, which improves contrast when examining anisotropic or birefringent materials. A polariser filters incoming light to a single plane of vibration, while the analyser—supplied as a screw-in unit—selects the transmitted polarisation. This interaction reveals internal stresses, layered structures and surface treatments more clearly, making optical differentiation easier and inspection results more reproducible. The practical advantage is faster assessment of materials such as polymers, composites and crystalline samples under standard laboratory illumination. Straightforward integration with NexiusZoom microscopes Designed specifically for the NexiusZoom series, the set requires an Ø 95 mm mounting hole and is supplied with a rotatable table and the analyser for underneath installation. The mechanical design ensures stable positioning and low eccentricity during rotation, reducing vibrations and preserving image fidelity while adjusting polarisation. Note that the kit is intended for use only with the updated microscope version specified in the installation note and is not compatible with additional objective attachments. This focused compatibility minimises installation effort and avoids mismatched accessory combinations that could compromise performance. Practical applications for testing, quality control and teaching Delivered as a compact kit including the polarisation turntable (NZ.9524) and the analyser (NZ.9525), the set supports routine quality-control tasks, materials research and instructional demonstrations. The rotatable stage permits quick orientation changes without re-clamping the sample, reducing cycle time in production testing. For teaching environments, the visible change in contrast when rotating the stage creates a clear demonstration of polarisation principles, helping learners grasp optical phenomena. Built for repeated use in inspection workflows, the accessory contributes to consistent imaging results and improved throughput where polarised-light evaluation is required. Contact Metav Werkzeuge for expert advice on compatibility, to confirm suitability for the new NexiusZoom microscope or to place an order through our consultants Technical data Article number: NZ.9520 SKU/UID: NZ.9520 Core data Rotation range: 360° Required mounting hole: Ø 95 mm Special features Integrated polariser Analyser for screwing under the head (NZ.9525) Rotatable polarisation stage (NZ.9524) Only compatible with the new NexiusZoom microscope version Not suitable for simultaneous use with objective attachments FAQ What components are included with the polarisation set? The Polarisation set for NexiusZoom (NZ.9520) includes the polarisation rotatable polarisation stage NZ.9524 and the screw-in analyser NZ.9525 for underside mounting. Can this polarisation kit be used with older NexiusZoom microscopes? No, the polarisation set NZ.9520 is intended for installation only with the specified new NexiusZoom microscope version and requires an Ø 95 mm mounting aperture. Is the analyser compatible with objective attachments or auxiliary lenses? The analyser supplied with NZ.9520 is not suitable for simultaneous use with objective attachments; use without additional objective adapters is required. Which inspection tasks benefit most from this polarisation accessory? The polarisation set is particularly valuable for detecting birefringence, internal stress and layered structures in polymers, composites and crystalline materials during quality control and research. How does the 360° rotatable stage improve workflow? A full 360° rotation allows precise adjustment of polarisation orientation without reclamping samples, speeding up comparative inspections and repeat measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, well‑lit support that combines stable footing, an adjustable column and integrated LED incident and transmitted illumination to improve inspection throughput and reduce setup time; order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Stand SD2‑Dext — Microscope stand with integrated LED incident and transmitted illumination (Metav IndustryLine) Stand SD2‑Dext is a robust support designed for stereo microscope applications, offering a compact work surface and adjustable reach for assembly, inspection and laboratory tasks. Integrated LED incident and transmitted lighting Stable base 283 x 292 mm for vibration reduction Column Ø25 x 350 mm with 140 mm outreach 3 W LED lighting for consistent illumination Consistent lighting for repeatable inspection results The integrated LED incident and transmitted illumination delivers uniform, flicker‑free light that improves visual contrast and reduces operator fatigue during prolonged inspections. The 3 W LED module is energy efficient and produces stable colour rendering, enabling reliable visual assessment of components. Built‑in lighting removes the need for external lamps and simplifies the bench layout, which is particularly useful in production or quality‑control environments where consistent illumination directly affects judgement. Stable support that minimises vibration and improves handling A broad base measuring 283 x 292 mm provides a low centre of gravity and reduces vibrations during fine work, resulting in steadier images at higher magnifications. The dedicated work platform of 95 mm gives a compact yet practical area for small assemblies and measuring fixtures, while the mounting interface of 76 mm accommodates common objective holders. The solid construction allows precise positioning without compromising ease of operation, improving both speed and repeatability in routine tasks. Flexible reach and focusing for varied components The vertical column (Ø25 x 350 mm) combined with an outreach of 140 mm enables comfortable access to taller assemblies and awkwardly shaped parts without loss of stability. A focus range of 50 mm supports adjustments for part thickness and stereo microscope zoom changes, making the stand suitable for tasks from electronics inspection to small mechanical assemblies. The arrangement balances reach and stiffness to maintain measurement and inspection integrity across the working envelope. Designed for workshop and laboratory workflows This stand is intended as a practical bench solution for inspection, assembly and quality checks. The compact footprint and integrated lighting reduce setup time and free bench space for tooling or documentation. The construction and feature set make it appropriate for routine laboratory use, technical education, and industrial inspection where dependable illumination and mechanical stability are priorities. Contact Metav Werkzeuge for tailored application advice and to request the SD2‑Dext stand from Metav IndustryLine, including information on availability and delivery to your works. Technical data SKU: M503.233.1 GTIN: 4054469145051 Type: SD2‑Dext Brand: Metav IndustryLine Customs tariff: 90119090 Facts Work surface: 95 mm Mounting interface: 76 mm Outreach: 140 mm Focus range: 50 mm Base footprint: 283 x 292 mm Column: Ø25 x 350 mm LED power: 3 W Special features Integrated LED incident and transmitted illumination Compact platform for stereo microscope applications Robust, low‑vibration base Suitable for inspection, assembly and laboratory tasks SD2‑Dext model configuration FAQ What type of illumination does the stand provide? The stand delivers integrated LED incident and transmitted illumination; the SD2‑Dext from Metav IndustryLine uses a 3 W LED module to ensure consistent, flicker‑free lighting. Is the stand suitable for stereo microscope workbenches? Yes; the SD2‑Dext is a microscope stand designed specifically for stereo microscope applications and provides a compact work surface (95 mm) and a stable base (283 x 292 mm). What are the mounting and reach dimensions? Mounting interface 76 mm, column Ø25 x 350 mm and an outreach of 140 mm give flexible positioning for a range of sample sizes when using the SD2‑Dext (SKU M503.233.1). Can the stand be used for inspection of small electronic components? The combination of stable base, focused reach and uniform LED illumination makes the SD2‑Dext well suited to electronics inspection and similar fine tasks. How energy efficient is the lighting? The integrated lighting is a 3 W LED module, providing efficient, stable illumination appropriate for continuous use in production or laboratory settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact 9 mm diameter and IP67 protection combined with a 1,000 mm reach deliver reliable access to confined inspection spaces while maintaining robust environmental resistance; order the camera probe directly via Metav Werkzeuge or consult our specialists for application advice. M503.176.1 Camera probe – 9 mm diameter, IP67 inspection camera (Metav IndustryLine) M503.176.1 is a compact camera probe for photo‑video endoscopy, designed for narrow‑bore inspections and long‑reach visual checks in industrial and workshop environments. Slim 9 mm probe diameter Dimmable white LED illumination Wide observation depth 12.7–305 mm IP67 dust and water protection Precision access for narrow bores and long reach The 9 mm diameter housing offers a balance between minimal invasiveness and on‑board optics, allowing inspections of tight cavities, pipe interiors and assembly gaps where larger heads cannot enter. With a 1,000 mm length and a total weight of 0.2 kg, the probe provides extended reach without excessive operator fatigue. The slim profile reduces the risk of scratching internal surfaces while the lightweight construction supports handheld manoeuvrability and longer inspection cycles with minimal strain. Compatibility with existing inspection fixtures is supported: the probe is listed as suitable for use with M503.171.0 and M503.172.0 accessories, enabling integration into established workflows. Sharp images and adaptable lighting for reliable decisions Optical characteristics such as a 50 mm focal length, a 60° field of view and a working range of 12.7–305 mm ensure clear imaging across a useful depth gradient. The specified observation depth (working distance) means the camera will maintain focus for both close‑up detail checks and mid‑range component surveys without constant refocusing. Integrated dimmable white LEDs deliver controllable illumination so contrasts and surface conditions are revealed consistently; dimming prevents overexposure in reflective assemblies and preserves critical visual detail. These attributes translate into faster defect detection and fewer repeat inspections — a direct gain in throughput for maintenance and quality assurance operations. Robust design built for industrial conditions Rated IP67, the probe is dust‑tight and protected against temporary immersion, which suits applications in harsh or wet environments such as rinsing stations, engine bays and pipework. The sealed design helps prevent contamination of optics during routine use and supports cleaning procedures common in industrial settings. The housing and connector interfaces are engineered for workshop resilience while retaining precision optics; this combination reduces downtime caused by fragile inspection tools. The product is packaged and identified by SKU M503.176.1 and integrates into optical equipment lines categorised under industry standard eClass identifiers for simple procurement and inventory handling. How the probe improves inspection workflows By combining compact geometry, a long working reach and adaptable illumination, the device enables faster inspections with fewer tool changes. The probe’s specifications support repeatable visual records for quality documentation and simplify comparisons between inspection runs. For procurement teams and workshop managers the practical benefits are clear: reduced handling complexity, improved access to hidden areas and consistent image quality for assessment and reporting. The device is presented under the Metav IndustryLine portfolio, which emphasises readiness for industrial use and straightforward integration into a shopfloor inspection regime. Choose the Metav IndustryLine camera probe for dependable inspection access and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and ordering Technical data Article number: M503.176.1 GTIN: 4054469167770 Manufacturer: Metav IndustryLine Core specifications Diameter: 9 mm Length: 1,000 mm Weight: 0.2 kg Observation depth: 12.7–305 mm Focal length: 50 mm Field of view / angle: 60° Protection rating: IP67 Special features Dimmable white LED illumination Compatible with M503.171.0 and M503.172.0 eClass: 21059058 Customs tariff number: 85229080 Category: Optik FAQ What environments is this probe suitable for? The camera probe M503.176.1 (Metav IndustryLine) is rated IP67, making it suitable for dusty and temporarily submerged environments typical of workshop and industrial inspection tasks. What is the usable working distance and how does it affect imaging? The working range of 12.7–305 mm provides focused imaging from close detail work to mid‑range component checks; this range ensures both fine defect detection and broader area surveys without frequent refocusing. Can the probe be integrated with existing inspection fixtures? Yes — the probe is listed as compatible with M503.171.0 and M503.172.0 accessories, allowing straightforward integration into established inspection setups and fixtures in the Metav product family. How is illumination controlled for reflective or dark surfaces? Integrated dimmable white LEDs allow the lighting intensity to be adjusted to match surface reflectivity and ambient conditions, reducing glare and improving contrast for reliable visual evaluation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact design, IP67 protection and adjustable white-light illumination to inspect confined spaces reliably; the combination of 9 mm diameter, wide depth range and IP rating supports repeatable checks in production. Order the camera probe directly via Metav Werkzeuge or consult our specialists for configuration advice. Camera probe M503.176.4 — compact video endoscope probe with IP67 and dimmable LEDs (Metav IndustryLine) The Camera probe M503.176.4 is a robust video endoscope probe for internal visual inspection in assemblies, ducts and confined components, designed for industrial inspection and maintenance tasks. Compact 9 mm probe diameter Dimmable white LED illumination IP67-rated for dust and water protection 60° viewing angle, 12.7–305 mm depth Precise imaging where access is limited A slim probe body and focused optics enable clear visual checks in narrow bores and tight cavities. The slender 9 mm diameter combined with a focal field spanning 12.7–305 mm allows for both near and medium-range inspection without changing optics, reducing stoppages. The optical design with a 50 focal setting balances depth of field and detail resolution so that defects, assembly misalignments or foreign objects become identifiable at speed. This precision supports faster non‑destructive assessment and fewer reworks, improving throughput. Durable performance under industrial conditions Rated IP67, the probe tolerates dust ingress and temporary immersion, making it suitable for workshops and production environments where contamination or splash exposure occurs. Integrated dimmable white LEDs provide adaptable illumination, preventing overexposure on reflective surfaces and enabling consistent image contrast across materials. The 60° viewing angle captures broader fields without moving the probe excessively, while a 3 m cable length gives practical reach to inspection points. Together, these attributes ensure reliable, repeatable inspections that contribute to measurable quality control. Integration into inspection workflows and decision processes The probe is conceived as part of a practical inspection setup and interfaces with photo‑video endoscope systems to deliver live imaging for documentation and analysis. With a native resolution of 640×480 and standard video output, recorded sequences can be archived for traceability or forwarded to colleagues for rapid assessment. Compatibility with Metav inspection components and clearly documented identifiers such as SKU M503.176.4 and GTIN support streamlined procurement and asset tracking. For workshops seeking greater inspection coverage without complex retrofits, this probe offers a balanced solution between accessibility, robustness and imaging utility. For a tailored inspection setup or to discuss suitability for specific applications, contact Metav Werkzeuge in Emmerich to review the Metav IndustryLine camera probe M503.176.4 and receive hands‑on advice from our product specialists. Technical Data SKU: M503.176.4 GTIN: 4054469167923 Eclass: 21059058 Tariff code: 85229080 IP protection: IP 67 Diameter: 9 mm Viewing angle: 60° Depth of field: 12.7–305 mm Focal length: 50 Cable length: 3000 mm Illumination: dimmable white LEDs Resolution: 640×480 Numbers / Core technical data Diameter: 9 mm Cable length: 3 000 mm Viewing angle: 60° Depth of field: 12.7–305 mm Resolution: 640 × 480 pixels Special features IP67 ingress protection Dimmable white-light LED illumination Designed for photo-video endoscope use Suitable for integration with Metav inspection systems (see SKU) FAQ What environments is the probe suitable for? The probe’s IP67 rating makes the Metav IndustryLine video endoscope suitable for dusty workshops and locations where temporary water exposure may occur, allowing inspections in harsher production settings. What is the effective inspection range? The optical system provides a working range from 12.7 mm to 305 mm, enabling both close‑up checks and medium‑distance inspections with a 60° field of view for broader coverage. Can the illumination be adjusted to prevent glare? Yes, the integrated dimmable white LEDs enable fine control of light output to avoid reflections and to tailor contrast for different surface finishes and materials. What are the probe dimensions and reach? The probe measures 9 mm in diameter and is supplied with a 3 m cable, offering access to confined areas while maintaining a practical operating length. How is image quality recorded or reviewed? The probe delivers standard video output at 640×480 resolution suitable for live inspection, documentation and subsequent review within common inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection head and robust protection rating for dependable in‑place visual checks. The combination of dimmable white LEDs and a 9 mm probe diameter enables clear imaging in tight assemblies while IP67 protection keeps the unit operational in harsh environments. Order the camera probe directly via Metav Werkzeuge or consult the technical team for application advice. Kamerasonde M503.176.3 — camera probe with dimmable white LEDs and IP67 protection The Kamerasonde M503.176.3 is a camera probe designed for photo‑video endoscope applications, optimised for visual inspection of confined components and assemblies. Dimmable white LED illumination 9 mm probe head for tight spaces IP67 protection for industrial use 3 m flexible cable for extended reach Reliable imaging in confined spaces for faster inspections The camera probe delivers a focused inspection capability from very close range through to a medium working distance thanks to a focal length of 50 mm and a depth of field of 12.7–305 mm. The 60° field of view balances situational awareness with detail, allowing clear capture of features without frequent repositioning. Integrated dimmable white LEDs provide adaptable illumination for variable surface finishes; lowering light intensity reduces glare on reflective parts, while higher output reveals textures and defects. This combination shortens inspection cycles and reduces the need for secondary checks. Built to withstand shop‑floor conditions and maintain uptime Robustness is a key contributor to reliable production flow. With an IP67 rating the probe head resists dust ingress and temporary immersion, making it suitable for workshop environments where exposure to coolant mist or particulate is likely. The unit weighs approximately 0.5 kg and is supplied with a 3 m connection, offering sufficient reach without excess bulk. These characteristics support continuous use during maintenance rounds and in‑process inspections, helping to avoid unexpected downtime and maintain quality control routines. Simple handling and clear image results for diverse applications The probe produces usable video at a resolution of 640 x 480 and connects into standard photo‑video endoscope setups; brightness is adjustable via the integrated LED control to match material reflectivity. The small 9 mm head accesses narrow bores and cavities that larger optics cannot, while the broad depth range reduces the need for minute focusing adjustments. The unit is listed under the optics category and is compatible with related system components, facilitating straightforward integration into existing inspection toolsets and reducing setup time for repetitive tasks. For reliable, compact inspections with a proven industrial probe, order the Kamerasonde M503.176.3 from Metav Werkzeuge or contact the Metav technical team in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M503.176.3 GTIN: 4054469167787 Manufacturer: Metav IndustryLine Numbers / Core technical data Diameter: 9 mm Cable length: 3 000 mm Weight: 0.5 kg Focal length: 50 mm Depth of field: 12.7–305 mm Field of view: 60° Resolution: 640 x 480 IP rating: IP 67 ECLASS: 21059058 Customs tariff number: 85229080 Designs / Special features Dimmable white LED illumination Intended for photo‑video endoscope use Suitable for tight cavities and bores Compatible with M503.171.0 / M503.172.0 Category: Optik Image assets available FAQ What environments is the probe suited for? The Kamerasonde M503.176.3 is designed for industrial environments and carries an IP67 rating, making the probe head resistant to dust and temporary immersion. What visual range can be expected from the probe? With a focal length of 50 mm and a depth of field from 12.7 to 305 mm, the probe provides usable imaging from very close‑up to several hundred millimetres for component inspection. Can the illumination be adjusted for reflective materials? Yes, the dimmable white LEDs on the camera probe allow brightness control to reduce glare on reflective surfaces and improve defect visibility. Is the probe compatible with existing endoscope systems? The unit is intended for photo‑video endoscope applications and is compatible with associated system components; check compatibility with models M503.171.0 and M503.172.0 where applicable. How long is the probe cable and how does that affect handling? The probe is supplied with a 3 m cable, providing reach for most bench and in‑situ inspections while maintaining manageable handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, watertight inspection capability with dependable illumination: the combination of a 9 mm probe tip, IP67 protection and a 1,000 mm reach delivers repeatable access to confined spaces and reduces inspection downtime. Order the probe directly via Metav Werkzeuge or contact our consultants for application advice. Camera probe M503.176.2 — 9 mm diameter, IP67-rated inspection head (Metav IndustryLine) A compact camera probe M503.176.2 designed for close-up visual inspection in tight, wet or dusty environments, ideal for bores, assemblies and maintenance tasks 9 mm diameter for confined inspections IP67 protection for wet and dusty environments Dimmable white LED illumination 1,000 mm flexible probe length Precise access where space is limited The slim 9 mm probe head allows direct visual access into narrow bores, ducts and machine cavities that larger cameras cannot reach. By combining a small profile with a measured focal design, the unit keeps the image stable even in restricted geometries, which helps to reduce the number of repeat inspections and shortens fault-finding cycles. The compact construction is particularly beneficial for service engineers and maintenance teams who routinely inspect engines, valves or mould cavities and require consistent, readable images from hard-to-reach areas. Robust protection for workshop conditions Built for use in demanding environments, the inspection head carries an IP67 rating that protects against dust ingress and temporary immersion. The sealed design prevents contamination from coolant, cutting fluids or workshop dust, preserving optics and electronics and extending service intervals. With a 1,000 mm probe length, the assembly balances reach and handling: long enough for deeper inspections yet still manageable from a single attachment point, which supports quicker checks on assemblies without complex fixtures. Illumination and image geometry tuned for clarity Integrated dimmable white-light LEDs offer controllable lighting to match surface reflectivity and working distance, preventing overexposure on shiny metals and improving contrast on matt surfaces. The imaging chain with 640x480 resolution, combined with a depth of field 12.7–305 mm and a 50 mm focal length, provides a useful compromise between close-up detail and usable working distance. These characteristics ensure that features such as burrs, wear patterns or seal defects become visible without constant refocusing, which increases inspection throughput and decision confidence. Field-ready optics and practical integration A 60° viewing angle offers a wide observation cone that captures relevant context around a defect while still resolving fine detail at the centre of the image. The probe is supplied ready for integration with compatible inspection rigs and accessories and is marked for compatibility with referenced tooling where indicated. This flexibility supports diverse use cases, from assembly-line checks to portable service kits, enabling teams to adapt the probe to existing workflows and minimise additional equipment investment. Contact Metav Werkzeuge today for tailored advice and to arrange supply of the M503.176.2 camera probe through Metav Werkzeuge’s direct order channels Technical Data Article number: M503.176.2 GTIN: 4054469167916 ECLASS: 21059058 TARIC/Customs code: 85229080 Facts Probe length: 1,000 mm Probe diameter: 9 mm Viewing angle: 60° Focal length: 50 mm Depth of field: 12.7–305 mm Resolution: 640x480 IP protection: IP 67 Special features Dimmable white-light LED illumination Compatible with M503.173.0 Category: Optik FAQ What environments is the camera probe suited to? The camera probe M503.176.2 is designed for industrial environments and carries an IP 67 rating, making it suitable for dusty workshops and conditions with temporary immersion. Can the lighting be adjusted for reflective surfaces? Yes, the dimmable white-light LEDs allow illumination to be reduced or increased to avoid glare on reflective metals and to enhance contrast on dull surfaces. What inspection distances are supported by the optics? Optical design provides a usable depth of field from 12.7–305 mm, which supports both close-up detail work and slightly longer-range inspections without the need for frequent refocusing. Is the probe compatible with other inspection accessories? The probe is marked as compatible with referenced tooling entries (e.g., M503.173.0) and can be integrated into existing inspection rigs or portable kits where mechanical interfaces match. Which features make this probe suitable for maintenance teams? Maintenance teams benefit from the slim 9 mm diameter for confined access, the 1,000 mm reach for deeper inspections, and the sealed IP 67 construction that tolerates typical workshop contaminants. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of portable wireless transmission, a slim 9 mm probe and a detachable 5″ colour monitor to speed up fault finding and reduce inspection time; order through Metav Werkzeuge or consult their advisors for further assistance. Photo‑video endoscope M503.173.5 — 9 mm probe, removable 5″ wireless colour monitor (Metav IndustryLine) The Photo‑video endoscope M503.173.5 is a portable inspection camera designed for visual checks in confined spaces such as cavities and pipes, supplied with a detachable wireless 5″ colour monitor for immediate on‑site assessment. 9 mm inspection probe for confined spaces Removable 5″ LCD colour monitor with 4× zoom Wireless 2.4 GHz image transmission, up to 10 m Internal 128 MB memory plus SD card slot for images Fast, clear inspection where access is limited The 9 mm probe combined with a detachable 5″ colour monitor creates a compact, mobile solution for rapid visual inspection. Wireless transmission over 2.4 GHz to the monitor (range up to 10 m) removes cable clutter and permits work in awkward environments; the monitor supports digital zoom (1×–4×) and 180° image rotation, enabling quick orientation and detailed checks of suspect areas. Adjustable LED illumination at the probe tip ensures usable images even in poorly lit cavities, so reports and initial diagnoses can be produced on the spot without lengthy set‑ups. Secure recording, simple transfer and dependable power Integrated 128 MB internal memory and an SD card slot allow photos and video to be stored and transferred for documentation and traceability; an SD card is not included. The unit uses a rechargeable lithium battery with a mains adaptor for continuous operation and straightforward recharging between inspections. These features support efficient workflows in maintenance and service routines: images can be archived for quality records or forwarded to colleagues for immediate assessment, reducing error‑prone guesswork and repeated inspections. Practical design for workshop and field use With a 3 000 mm flexible insertion length and a slim 9 mm diameter, the probe reaches deep or narrow passages commonly encountered in vehicle engines, drainage systems and building services. The camera delivers a clear 800 × 480 display resolution on the detachable monitor, while wireless capability and a lightweight monitor enhance manoeuvrability during inspections. The construction suits routine diagnostic tasks in automotive and construction environments, streamlining fault localisation and shortening downtime through quicker decision making and better visual evidence. For reliable mobile inspections with Metav IndustryLine’s wireless photo‑video endoscope, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M503.173.5 GTIN: 4054469167572 eClass: 21059058 Tariff number: 85219000 Core specifications Probe diameter: 9 mm Insertion length: 3 000 mm Display: removable 5″ LCD colour monitor Display resolution: 800 × 480 px Wireless transmission: 2.4 GHz, range up to 10 m Digital zoom: 1×–4× Image rotation: 180° Internal memory: 128 MB SD card slot: yes (SD card not included) Power: rechargeable lithium battery and mains adaptor Features and functions Adjustable LED illumination at probe tip Photo and video capture and storage Removable monitor for team viewing or separate use Suitable for inspections in automotive and construction applications Wireless image transfer to detachable monitor SD card slot for simple file export FAQ What is the diameter of the inspection probe? The Metav IndustryLine photo‑video endoscope M503.173.5 features a 9 mm probe suitable for confined and narrow access inspections. How is the image transmitted and viewed? The Metav IndustryLine photo‑video endoscope M503.173.5 transmits images wirelessly over 2.4 GHz to the detachable 5″ colour monitor, with a maximum practical range of about 10 m and selectable digital zoom. Can images and video be stored and exported? Yes. The Metav IndustryLine photo‑video endoscope M503.173.5 provides 128 MB internal memory and an SD card slot for storing photos and video; an SD card is not supplied with the unit. What powers the inspection camera and how long can it run? The Metav IndustryLine photo‑video endoscope M503.173.5 is powered by a rechargeable lithium battery and can be charged via the supplied mains adaptor for continuous or repeated inspection sessions. Which applications suit this inspection tool best? The Metav IndustryLine photo‑video endoscope M503.173.5 is ideal for quick visual inspection of hard‑to‑reach areas such as cavities and pipes in automotive maintenance, building services and general on‑site diagnostics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Peak Thread Counter — Rectangular Zinc Thread Counter, 9x Peak Thread Counter is a compact optical tool designed for precise textile and print inspection, offering a clear 9x magnification and an engraved millimetre scale for exact measurements. Compact, easy-to-use inspection aid Engraved mm scale on each foot side Rectangular Zinc Body for robust handling 9x Magnification for clear thread counting Wide 10x10 Field of View for fast overview Precision measurement where it matters The Peak Thread Counter provides reliable 9x magnification to count threads and assess fabric structures with ease. Its clear optics and stable rectangular shape allow for accurate alignment on samples, reducing reading errors and speeding up inspection tasks. Professionals benefit from measurable results and repeatable outcomes when documenting textile quality. Durable construction for daily use Manufactured from Zinc (black), this gauge combines a compact footprint with robust resistance to workshop wear. The weight and finish support steady handling and long service life while the design keeps the instrument conveniently portable. The solid build translates into fewer recalibrations and consistent performance during frequent use. Practical features that simplify inspection An engraved mm scale on both sides of the foot enables immediate dimensional reference without additional tools. The lens configuration listed as x2 supports the optical system while the 10x10 Field of View speeds up scanning of larger fabric areas. These practical elements let technicians and hobbyists obtain reliable readings quickly. Clear explanation for first-time users A millimetre scale engraved along the foot corresponds to the visible width of the field of view, so the scale length equals the sample width seen through the lens. This means measurements are direct and intuitive, even for users unfamiliar with optical gauges. The compact dimensions make the device straightforward to position and read, improving workflow efficiency. I recommend the Peak Thread Counter for precise textile inspection — for comprehensive technical advice and personalised support contact METAV Werkzeuge, email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Thread Counter Brand: Peak SKU: MS905.380 Secondary designation: rectangular zinc, 9x Material: Zinc (black) Lens: x2 Field of View: 10x10 Magnification: 9x Special feature: with engraved mm scale Additional information: Due to its small dimensions this Thread Counter is easy to handle. A mm scale is engraved on each side of the foot. The scale length corresponds to the width of the field of view. UID: MS905.380 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the main use of the Peak Thread Counter from Peak for textile inspection? The Peak Thread Counter by Peak is intended for precise thread counting and fabric structure checks, offering 9x magnification and an engraved mm scale to enable direct measurement and repeatable inspection results. How do I read measurements with the Peak Thread Counter from Peak? Place the Thread Counter flat on the sample and align the fabric within the 10x10 Field of View, then read the engraved mm scale on the foot edge that matches the visible width for an immediate measurement. Is the Peak Thread Counter suitable for frequent professional use? Yes, the zinc construction of the Peak Thread Counter and its compact, ergonomic shape make it suitable for daily quality control tasks in workshops and laboratories. Can beginners use the Peak Thread Counter from Peak without prior training? Beginners can use the Thread Counter easily because the engraved mm scale corresponds to the field of view width, allowing intuitive direct readings and fast learning during inspection routines.

Benefit from precise camera integration, robust mechanical stability and straightforward mounting for reliable documentation results; order the adapter directly via Metav Werkzeuge or ask the consultants for integration advice. Adapter PT02‑Nikon — Trinocular stereo microscope camera adapter for Nikon SLR by Metav IndustryLine The Adapter PT02‑Nikon converts a stereo microscope trinocular head to accept Nikon digital SLR cameras, enabling stable and repeatable image capture for laboratory inspection, quality control and documentation purposes Nikon SLR mount compatibility Stable mechanical connection for imaging Quick attachment to trinocular heads Reliable camera integration for repeatable imaging The PT02‑Nikon adapter provides a metal‑to‑metal interface that secures a Nikon SLR to a trinocular stereo microscope, preserving the optical axis and reducing lateral play during capture. By maintaining a consistent mechanical coupling, the adapter supports repeatable imaging procedures that are essential in inspection, teaching and production documentation. The secured connection minimises re‑set and alignment time between captures, improving workflow efficiency and data consistency for traceable results. Precision alignment and consistent optical performance Designed to match the optical path of standard trinocular heads, the unit promotes optical alignment that keeps the image plane steady and close to parfocal, which simplifies focus transfer between oculars and the camera. This consistency benefits both photomicrography and measurement tasks where unchanged magnification and field of view are required. The adapter's construction reduces the risk of vignetting and off‑axis aberrations, supporting higher throughput in image documentation without compromising image quality. Durable build and practical laboratory workflow advantages A robust mechanical design provides a stable mount that copes with frequent attachment cycles in busy labs or inspection bays. The adapter is suitable for routine photographic documentation, archival imaging and comparative inspections, and integrates into existing microscope setups without complex modification. Combined with Metav’s emphasis on reliable supply and product filtering from its Emmerich hub, the adapter contributes to a dependable workflow that reduces downtime and eases equipment consolidation across workshops and technical departments. Contact Metav Werkzeuge to arrange delivery of the Metav IndustryLine PT02‑Nikon adapter and to discuss technical integration or compatibility with existing microscopes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M503.254.2 GTIN: 4054469145365 Model: PT02‑Nikon Brand: Metav IndustryLine Connection: Nikon Weight: 6.15 kg Tariff number: 90119090 eClass: 32130102 Core specifications Weight (kg): 6.15 GTIN: 4054469145365 Tariff number: 90119090 Features and compatibility Adapter for digital SLR cameras, Nikon For stereo microscope with trinocular head Robust mechanical interface for repeatable mounting Model designation PT02‑Nikon Category: Optics FAQ Is the adapter compatible with all Nikon SLR models? The adapter accepts Nikon SLR cameras using the standard Nikon mount; compatibility depends on the camera’s flange distance and any additional reduction optics required for parfocality. Can the adapter be used with non‑Nikon camera systems? The PT02‑Nikon is specified for Nikon mount cameras; using other brands typically requires a dedicated mount adapter or a different model designed for that camera bay. Will the adapter affect the microscope’s field of view or focus? The adapter is engineered to maintain the optical axis and minimise vignetting; minor adjustments may be needed to achieve parfocality depending on camera sensor size and any intermediate optics. Is the adapter suitable for photomicrography in quality control workflows? Yes, the mechanical stability and consistent alignment of the PT02‑Nikon support repeatable documentation required in quality control and inspection environments. Does the delivery include any camera or extra optics? The delivery comprises the adapter unit only; cameras, camera lenses and reduction optics are not included unless otherwise specified. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of direct Canon SLR compatibility and secure trinocular attachment to streamline microscopy documentation; the PT02-Canon adapter ensures reliable mechanical coupling and traceable identification for workshop procurement. Order the adapter directly via Metav Werkzeuge or consult the Metav team for compatibility checks. Adapter PT02-Canon – Trinocular microscope to Canon SLR connection (Metav IndustryLine) Adapter PT02-Canon is a mechanical interface that links a trinocular stereo microscope head to a Canon digital SLR camera, enabling photographic documentation and image capture for inspection and archiving. Compatible with Canon SLR cameras For trinocular stereo microscopes Model PT02-Canon, SKU M503.254.1 GTIN 4054469145358 for traceability Reliable imaging and reproducible documentation The adapter provides a stable mechanical coupling between a trinocular stereo microscope and a Canon SLR, preserving the optical axis and minimising image displacement during capture. This physical connection supports consistent framing and exposure when photographing specimens, which is essential for quality assurance, traceability and process documentation. The solid coupling reduces the risk of accidental misalignment during routine imaging tasks, improving the repeatability of recorded views without altering the microscope's optical train. Practical fit and straightforward integration into workflows Designed for straightforward assembly with a trinocular head, the accessory secures the camera so that photographic work becomes an integrated part of the inspection workflow. The interface eliminates improvised fixes and provides a defined mechanical join for mounting, which benefits laboratories and workshops that require fast, repeatable capture of magnified parts or samples. By standardising the camera attachment, the adapter helps accelerate documentation tasks and reduces setup time between successive imaging sessions. Traceability, identification and supply reliability Each unit is supplied with clear identifiers such as SKU M503.254.1 and GTIN 4054469145358, enabling inventory control and long-term traceability in procurement processes. As a Metav IndustryLine product, the accessory benefits from the supplier’s position as a European quality filter based in Emmerich, which supports dependable availability and consistent specification control for industrial users. The concise, purpose-built function of this interface focuses on secure camera attachment and reproducible image capture rather than adding optical modifications. Contact Metav Werkzeuge to confirm microscope compatibility and arrange supply of the PT02-Canon adapter; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M503.254.1 Type: PT02-Canon SKU: M503.254.1 GTIN: 4054469145358 Tariff number: 90119090 Numbers / Core Technical Data GTIN: 4054469145358 Tariff number: 90119090 Special features Connection: Canon Intended use: Adapter for digital SLR camera, Canon Application: Connection of stereo microscope with trinocular head to digital camera Category: Optik Manufacturer: Metav IndustryLine Image: m5032541-main.jpg FAQ Which cameras are compatible with this adapter? The adapter is compatible with Canon SLR cameras; the PT02-Canon provides the mechanical interface required to mount a Canon digital SLR to a trinocular stereo microscope. Can the adapter be used with any trinocular stereo microscope? The PT02-Canon is intended for microscopes fitted with a trinocular head; physical match to the microscope’s camera port should be verified prior to installation to ensure a secure fit. Does the accessory include a camera or optical inserts? The product is a mechanical adapter only; it does not include a camera or additional optical elements and is supplied as the mounting interface for imaging. How is the product identified for procurement and traceability? Identification is provided by SKU M503.254.1 and GTIN 4054469145358, which support inventory control and ordering workflows. Who supplies the adapter and where does it originate? The product is supplied under the Metav IndustryLine brand and distributed via Metav Werkzeuge, which manages European supply and specification control Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Are you looking for the right Dino-Lite microscope and need help? We are happy to be there for you! ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Key Features Article number: AM7013MT Brand: Dino-Lite Dino-Lite series: Dino-Lite Universal Facts: Magnification: 20~70x/200x Number of LEDs: 8 Resolution: 5 Megapixel Connection: USB 2.0 Cable length: ~1.8m Resolution in Pixel: 2592x1944 Product Advantages Casing material: Aluminium Light: weiß Calibration function Measuring function Magnification Lock Microtouch Working Distance: Standard Norms: CE, FCC Made in Taiwan Manufacturer: AnMo Electronics Corporation; 17F-1, No. 97, Sec. 4, Chongxin Road, Sanchong Dist., New Taipei City 241513, Taiwan; Tel:+886-2-29749126; E-Mail:Sales@anmo.com.tw

Take advantage of the aspherical optical design and proven compatibility with LE.5222 and LE.5213/5214/5215 light guides to improve focus accuracy in compact inspection and illumination assemblies; order directly via Metav Werkzeuge or consult the Metav team for application advice. LE.5224 Aspherical Focusing Lens — compact aspherical optic for precision focusing, suited to integration with LE.5222 assemblies (Euromex) LE.5224 Aspherical Focusing Lens offers a compact solution for concentrated illumination and inspection setups, intended for installation in compatible lamp and light-guide assemblies and optimised for stable, repeatable focusing in small-form-factor systems. Aspherical optical design for precise focus Compatible with LE.5222 and LE.5228 Fits LE.5213, LE.5214 and LE.5215 light guides Improve focus performance in compact illumination systems The aspherical geometry of the lens corrects spherical aberration, delivering a tighter, more accurate focal spot compared with simple spherical optics. This leads to improved imaging and illumination uniformity in inspection rigs and small optical instruments. With a simple optical function, the component reduces the need for complex multi-element assemblies while maintaining precision where it matters most in repeatable measurement or inspection tasks. Clear compatibility and easy integration into existing setups Designed for direct installation in LE.5222 assemblies and referenced alongside LE.5228 and the LE.5213/LE.5214/LE.5215 light guides, the lens streamlines upgrades and spare-part planning. The compact form factor supports quick replacement or retrofitting, lowering downtime in workshop or production environments. The compatibility list simplifies procurement decisions and ensures fitting accuracy when paired with the indicated optical holders and light-guide systems. Practical benefits for workshops and inspection labs For industrial users and trade workshops, the lens offers a practical balance of performance and simplicity: improved focal quality without extensive optical redesign. The component is suitable for inspection heads, small illumination modules and other confined optical paths where a well-defined beam is required. The result is a tangible enhancement in measurement consistency, part inspection reliability and overall process efficiency. Contact Metav Werkzeuge today to order the LE.5224 as an upgrade part or request expert advice from Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for compatibility guidance and delivery from Emmerich. Technical data Article number: LE.5224 Product: Aspherical focusing lens Manufacturer: Euromex Data Compatible with: LE.5222; LE.5228; LE.5213; LE.5214; LE.5215 Special features Intended for installation in LE.5222 Cross-sell: LE.5222 UID: LE.5224 Assembly note: Price list additionally lists LE.5228 and light guides LE.5213/LE.5214/LE.5215 FAQ What applications suit this aspherical focusing lens? The LE.5224 aspherical focusing lens is intended for concentrated illumination and inspection setups, particularly where a compact optical solution is required within LE.5222-compatible assemblies. Is the lens compatible with light guides? Yes. The lens is listed as compatible with LE.5213, LE.5214 and LE.5215 light guides and is referenced for integration alongside LE.5228 in the price list. Can the lens be fitted into existing LE.5222 units? The component is specified for installation in LE.5222 assemblies and is designed to align mechanically and optically with that product family. Does the lens require additional mounting hardware? Installation is intended within the compatible assemblies; mounting details are determined by the carrier unit (for example LE.5222) rather than the lens alone. How does the aspherical design affect inspection results? The aspherical profile reduces spherical aberration, producing a more concentrated focal spot and improved illumination uniformity, which supports more consistent visual inspection and imaging. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Augenmuschelpaar

Metav IndustryLine Beleuchtungslupe mit 2 LED-Leuchten und zusammenklappbar, mit 2 Lupen und 3 LED-Leuchten, mit LeuchtenTechnische Daten und Zusammenfassung: Hersteller: Metav IndustryLine Bezeichnung: Beleuchtungslupe Batterie: 2xAA (nicht im Lieferumfang enthalten) oder 3xAAA (nicht im Lieferumfang enthalten) je nach Ausführung Besonderheit: mit 2 LED-Leuchten und zusammenklappbar oder mit Leuchten je nach Ausführung Dioptrie: 2+6 bis 6 Gewicht: 0,2 kg Linse: Ø20mm - Ø90mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.

Take advantage of a clearly defined, high-contrast reference surface and the simplicity of a ready-supplied plate to streamline specimen alignment and routine inspection tasks; order the part via Metav Werkzeuge or request consultancy for compatibility and delivery options. Black/White Object Stage Plate NZ.9956 — Euromex microscope stage plate with high-contrast surface The Black/White Object Stage Plate NZ.9956 is a specialist stage accessory that provides a clear, two-tone background for positioning and inspecting small specimens on microscope stages, supplied as a black/white object plate. High-contrast black/white surface for precise alignment Compatible with microscope stage workflows Supplied as a ready-to-fit object plate (NZ.9956) Better contrast for faster sample alignment and inspection The high-contrast black/white surface improves visual separation between specimens and background, promoting faster sample positioning and more reliable visual inspection. For visual tasks where parts are small or low in contrast, the two-tone design reduces search time and supports repeatable placement under incident light or transmitted illumination. The plate functions as a simple optical aid that complements measurement or documentation steps, helping to reduce handling time and minimise repositioning during set-up. Seamless integration into microscopy workflows Designed as an object stage plate for microscope use, the component is supplied ready for installation, helping to maintain a steady inspection flow. Integration into an existing setup is intended to be straightforward: the plate serves as a uniform reference that standardises the visual field across samples, which benefits image capture and comparative checks. The feature supports procedural efficiency in quality control and educational applications where consistent framing and repeatability are required. Ready supply for maintenance and stock management Delivered as a single black/white object plate, the item simplifies replacement planning and spare-part management for laboratories and workshop inspection benches. The packaged scope of delivery lists the black/white object plate as included, enabling straightforward procurement and inventory control. For organisations that operate multiple microscopes, having standardised replacement plates reduces downtime and preserves the continuity of inspection routines. Contact Metav Werkzeuge for the Euromex Black/White Object Stage Plate NZ.9956 to discuss suitability for specific microscope stages and to arrange supply directly from Emmerich; Metav Werkzeuge can advise on delivery and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: NZ.9956 Product type: Object stage plate Description: Black/white object plate Supplied: black/white object plate Manufacturer: Euromex Data No numerical data available Special features High-contrast black/white surface Intended for use on microscope stages Supplied ready to replace existing object plates FAQ What is the primary purpose of the object stage plate? The Euromex Black/White Object Stage Plate NZ.9956 provides a high-contrast background to aid specimen visibility and precise alignment on microscope stages during inspection and documentation. What is included when ordering this item? Delivery of the Euromex Black/White Object Stage Plate NZ.9956 comprises the single black/white object plate as stated in the product description. Is the plate suitable for standard laboratory microscopes? The plate is intended for microscope-stage use; compatibility with a particular model depends on stage dimensions and mounting arrangements and should be verified before installation. Can the object plate improve photographic documentation? Yes, the two-tone surface enhances contrast in many imaging scenarios, supporting clearer specimen outlines and more consistent framing for photographic records. What is the SKU for ordering and reference? The item is listed under SKU NZ.9956 (Black/White Object Stage Plate, Euromex). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a purpose-built camera interface that combines reliable optical fidelity and straightforward installation to streamline visual inspection and measurement workflows; order directly via Metav Werkzeuge or consult the team for compatibility advice. CCD Adapter DH‑C1.0 — C‑mount 25.4 mm, 1.0× magnification (Metav IndustryLine) The CCD Adapter DH‑C1.0 provides a secure interface for mounting a CCD camera with a C‑mount (25.4 mm), delivering neutral 1.0× optical magnification for inspection and metrology tasks C‑mount interface, 25.4 mm Neutral 1.0× optical magnification Compatible with MZDH0850 caliper mounting Compact design for seamless integration Reliable camera interface for precise visual measurement The adapter supplies a mechanical and optical bridge between industrial cameras and measurement fixtures. With a standard C‑mount connection and a 1.0× magnification, the unit preserves the native field of view of the camera while providing a solid mounting point that reduces image shift during handling. This translates into reproducible visual checks and simplifies the imaging chain in production control, because the optical path is unchanged and repeatability is prioritised by the adapter’s geometry. The result is faster set‑up times and fewer alignment iterations in inspection routines. Seamless integration into inspection and metrology setups Designed for compatibility with inspection calipers and related fixtures, the adapter supports direct attachment to the specified caliper interface MZDH0850, enabling a compact assembly for documenting measurements. The neutral magnification avoids additional scaling steps in image processing, which helps to maintain measurement traceability when images are used for documentation. Clear mechanical coupling and a standardised thread mean the adapter fits into existing camera-based workflows without custom machining or complex interfaces. Practical benefits for workshop and laboratory use A compact, standardised camera interface reduces logistical friction on the shop floor and in the lab: stock one adapter to serve multiple cameras with C‑mounts, conserve bench space, and speed changeovers between inspection tasks. By keeping the optical ratio at 1.0× there is no unexpected increase in image noise or vignetting that can arise from auxiliary optics; this preserves image quality and keeps image evaluation robust. For quality teams and maintenance technicians, the adapter offers a straightforward way to add visual documentation to routine inspection steps. Contact Metav Werkzeuge today for technical compatibility checks and to order the Metav IndustryLine CCD Adapter DH‑C1.0 (SKU M503.251.2) through the Metav sales team in Emmerich Technical data Article number: M503.251.2 GTIN: 4054469145297 Model: DH‑C1.0 SKU: M503.251.2 ECLASS: 34551207 Tariff number: 90119090 Facts Mount: C‑mount, 25.4 mm Magnification: 1.0× Compatible with: MZDH0850 Category: Optics Special features Designed for CCD camera attachment with C‑mount Integration-ready for inspection and measurement setups Brand: Metav IndustryLine Thumbnail URL: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8f/09/f5/62/62f5098fdfaeaa8c6d7d158c/m5032514-main.jpg FAQ What cameras are compatible with this adapter? The adapter accepts any camera that uses a standard C‑mount (25.4 mm) connection; the CCD Adapter DH‑C1.0 is specifically built to match that thread and mechanical form factor. Can the adapter be used for calibrated measurement imaging? Yes, when combined with a calibrated camera and reference scale, the CCD Adapter DH‑C1.0 supports traceable documentation of parts within an optical inspection workflow. Is this adapter suitable for integration with calipers or measuring fixtures? The adapter is compatible with the caliper interface listed as MZDH0850, allowing straightforward mechanical integration into existing measuring setups. Will the magnification alter image scaling for subsequent analysis? The neutral 1.0× magnification of the adapter maintains the camera’s native field of view, minimising the need for post‑capture scaling adjustments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from flexible inspection options with screw‑on ring, magnet, hook and 90° mirror attachments and a compact connection suited to Ø5.5 mm cables; this combination supports consistent imaging in tight or awkward positions. Order the accessory directly via Metav Werkzeuge or consult our advisors for compatibility details. Accessory for photo‑video endoscope M503.179.1 — Metav IndustryLine, screw‑on multi‑adapter for inspection optics A versatile Accessory for photo‑video endoscope M503.179.1 designed to adapt a camera head for confined inspections by accepting multiple screw‑on attachments and standard cable diameters, extending the scope of visual checks in maintenance and quality control. Screw‑on ring attachment for stabilised optics Magnet adapter for ferrous surfaces Hook attachment for retrieval or positioning 90° mirror for lateral viewing capability Flexible attachments for confined inspection tasks The accessory offers a selection of screw‑on interfaces — ring, magnet, hook and 90° mirror — which convert a single camera head into a multi‑purpose inspection tool. This modular approach reduces the need for multiple specialised cameras by enabling rapid reconfiguration of the optical end for lateral viewing, surface attachment or part manipulation. The result is a more efficient workflow and fewer instrument changes during troubleshooting or assembly checks. Consistent connectivity and reliable imaging in tight spaces Designed for compatibility with a compact cable connection of Ø5.5 mm, the adapter maintains a secure link between the camera and recording unit, reducing signal noise and mechanical play. The robust mechanical interface ensures repeatable alignment of the optical axis when switching between attachments, which supports consistent image capture and simplifies comparison of inspection records across several components or process runs. Built for workshop durability and straightforward integration Constructed for practical use in inspection and service environments, the adapter screws securely to standard camera heads and resists frequent handling. The ability to fit several mounted accessories means fewer tool changes and less downtime when inspecting assemblies, weld seams or internal passages. The modular design also facilitates straightforward storage and transport within existing inspection kits, supporting a more productive inspection routine. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine accessory M503.179.1 with existing inspection systems and to confirm fitment and delivery from Emmerich Technical data SKU: M503.179.1 GTIN: 4054469167855 ECLASS: 34590192 HS code: 85229080 Manufacturer brand: Metav IndustryLine Facts Cable diameter compatibility: Ø5.5 mm Type designation: 1+3 Category: Optics Image asset available: yes Special features Ring, magnet, hook or 90° mirror attachments screwable on the camera head Suitable for photo‑video endoscope applications Compact connector for tight‑space inspections FAQ What attachments are available for the accessory and how do they mount? The accessory for photo‑video endoscope M503.179.1 accepts screw‑on ring, magnet, hook and 90° mirror attachments that fasten directly to the camera head for rapid reconfiguration. Is the adapter compatible with standard endoscope cabling? Yes, the adapter is specified for a cable connection of Ø5.5 mm, ensuring a compact and secure link between camera and recorder for the Metav IndustryLine accessory. Can the accessory be used for lateral inspections inside narrow bores? The 90° mirror attachment enables lateral viewing and is suitable for inspections of confined or offset features when mounted on the camera head. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

CCD Kamera Adapter (1/2" Sensor)Vorher ST-090.1

CCD Kamera-Adapter (1/3" Sensor)Vorher ST-090

Take advantage of a compact, professionally assembled cleaning kit that combines lint-free tissues, a blower and targeted swabs for residue-free optical maintenance; the contents reduce downtime and protect delicate surfaces. Order the kit directly via Metav Werkzeuge or consult our specialists for suitability and stock information. Euromex Lens Cleaning Kit PB.5275 — cleaning fluid, lint-free tissue and blower The Euromex Lens Cleaning Kit PB.5275 is a compact set created for safe, residue-free cleaning of optical surfaces in laboratories, inspection benches and maintenance workshops. Complete kit for lens and optical surface care Lint-free tissue prevents fibre contamination Includes blower and brush for dust-free cleaning Suitable for microscopes and optical instruments Maintain measurement accuracy with a complete optical cleaning set The set contains lens cleaning fluid, lint-free lens tissue/paper, a brush, a blower and swabs, arranged to address common contamination on optical components. Using the combined tools reduces the risk of scratches and streaks because loose dust is first removed with the blower, particulates are swept away with the brush and persistent residues are dissolved and lifted by the cleaning fluid and lint-free tissue. For precision applications, a consistent cleaning routine preserves instrument performance and extends service intervals. Avoid contamination — fibre-free results and controlled dust removal Fibre contamination and airborne particles impair imaging and measurement. The inclusion of lint-free tissue and single-use swabs ensures that no fibres are left behind on sensitive coatings, while the blower removes loose dust without contact. This approach supports repeatable, residue-free results and simplifies maintenance workflows by reducing rework caused by smears or particles. The components are selected to minimise mechanical contact and lower the chance of abrasion during routine cleaning. Practical kit design for laboratories and service benches Packed for convenience, the kit brings together the most frequently required items for optical upkeep, eliminating the need to source multiple consumables separately. The compact arrangement saves bench space and streamlines consumable management in production and inspection environments. As a result, technicians spend less time preparing for maintenance and more time on value-adding tasks, improving overall process efficiency in workshops and test rooms. Safe handling for delicate optics and coatings Tools in the kit support controlled, low-impact cleaning sequences: blower first, brush second, fluid and tissue for final cleaning, and swabs for confined areas. This staged method reduces mechanical stress on delicate surfaces and coatings, supporting long-term reliability of optics. When unsure about a specific coating or procedural detail, consult the instrument manufacturer's guidance to align cleaning steps with coating specifications before proceeding. Compatibility and identification for easy ordering The kit is identified by SKU PB.5275 and is suitable for routine optical maintenance across a wide range of instruments, including microscopes and inspection lenses. The clear contents list simplifies purchasing and stock control: the set includes cleaning fluid, lint-free lens tissue/paper, a brush, a blower and swabs, packaged for workshop use and straightforward replenishment. For procurement or application advice regarding the Euromex Lens Cleaning Kit PB.5275, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss stock availability and delivery options. Technical Data Article number: PB.5275 Type: Cleaning kit Brand: Euromex Contents: lens cleaning fluid; lint-free lens tissue/paper; brush; blower; swabs Facts Contents count: 5 items SKU: PB.5275 Special features Lint-free lens tissue/paper Blower for dust removal Brush for particle sweeping Cotton swabs for crevices Cleaning fluid for residue removal Suitable for microscopes and optical instruments FAQ What is included in the kit? The kit contains lens cleaning fluid, lint-free lens tissue/paper, a brush, a blower and swabs as specified for PB.5275. Can this set be used on coated lenses? The Euromex cleaning kit PB.5275 is designed for optical surfaces; for specific coated optics, follow the instrument or coating manufacturer's cleaning recommendations before use. How does the blower help cleaning? The blower removes loose dust without contact, reducing the risk of abrasion and preparing the surface for targeted cleaning with tissue and fluid. Is the tissue really lint-free? The lint-free lens tissue included in PB.5275 is selected to minimise fibre deposit and support residue-free finishing after cleaning. How should stubborn residues be treated? For persistent residues, use the supplied cleaning fluid together with lint-free tissue or a swab in gentle, controlled motions; avoid excessive pressure on delicate surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of an ergonomic column design, integrated 3 W LED incident and transmitted illumination, and an included head holder for reliable, repeatable inspection workflows; order the Euromex stand directly via Metav Werkzeuge or consult our specialists if needed. Euromex Ergonomic Column Stand NZ.9015 – Microscope stand with 3 W LED incident and transmitted illumination A Euromex Ergonomic Column Stand NZ.9015 is designed for stable mounting of microscope heads and intended for precision inspection tasks, compatible with the NexiusZoom series and supplied with a head holder. Stable column stand for precise positioning Single 3 W LED for clear incident illumination 3 W LED transmitted light for even contrast Precise, repeatable positioning for inspection and documentation The column base provides a stable platform that supports precise vertical movement and steady imaging, which is essential for consistent measurement and documentation. Built as an ergonomic column stand, the structure reduces wobble during fine adjustments and improves throughput by enabling faster, controlled sample alignment. This mechanical stability supports higher repeatability in inspection tasks and minimises the need for repeated setups, delivering measurable gains in process reliability. Integrated illumination that improves image quality and contrast Both incident illumination and transmitted illumination are integrated as 3 W LED sources, delivering uniform light across the field of view and helping to reveal surface detail and internal structure where required. The use of LED technology provides efficient, consistent output with minimal heat generation, which preserves sample integrity during extended examinations. For transmitted-light applications the dedicated 3 W source ensures even backlighting; the single 3 W incident source gives focused top illumination for surface inspection and stereomicroscopy. Designed for system integration and ergonomic workflow The support includes a head holder as part of the delivery, permitting direct mounting of compatible heads without additional adapters. Compatibility with the NexiusZoom series simplifies system assembly and reduces integration time when configuring stereo or zoom inspection setups. The ergonomic design improves operator comfort during repetitive tasks, lowering fatigue and enabling longer, more productive inspection shifts while preserving alignment accuracy for routine quality checks. Practical fit for laboratories, quality control and education Engineered for environments where stable, well-lit observation is required, the column base is a solid choice for laboratory benches, incoming inspection and training facilities. The combination of integrated incident and transmitted LEDs with a robust mounting point makes the stand suitable for a wide range of optical inspections from surface assessment to thin-sample examination. The compact, purpose-built design helps to centralise inspection equipment and streamline workflows in small workshops as well as larger metrology departments. Contact Metav Werkzeuge for tailored advice on integrating the Euromex ergonomic column stand NZ.9015 into existing inspection systems; our Emmerich-based team will provide technical guidance and delivery coordination. Technical Data Article number: NZ.9015 Manufacturer: Euromex Product type: Microscope stand Stand type: Column stand Included: Stand with head holder (as per price list) Facts Transmitted light power: 3 W Incident light power per source: 3 W Incident light sources: 1 Special features Integrated incident illumination Integrated transmitted illumination LED lighting Compatible with NexiusZoom series Ergonomic column design Head holder included FAQ Which microscope heads fit this column stand? The stand accepts heads compatible with the NexiusZoom series; the delivery includes a head holder to mount these heads securely. Are both incident and transmitted light sources integrated? Yes; the stand features integrated 3 W LED incident illumination and a 3 W LED transmitted light source for flexible inspection modes. Is a head holder supplied with the stand? Yes; the delivery specification states the stand is supplied with a head holder as per the price list. What benefits does the ergonomic column design offer? The ergonomic column design improves stable positioning and operator comfort, reducing setup time and supporting repeatable inspections. For which applications is this stand suitable? The stand is intended for laboratory inspection, quality control and education, offering uniform lighting and a stable mount for routine optical examinations. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com